1. PRODUCT NAME
SealMaster LV Concentrate
Pavement Sealer
2. MANUFACTURER
SealMaster has a nationwide
network of manufacturing and
distribution facilities.
Phone: 800-395-7325
www.sealmaster.net
3. PRODUCT DESCRIPTION &
BENEFITS
S e a l M a s t e r LV C o n c e n t r a t e
pavement sealer is a asphalt
based emulsion fortified with coal
tar for added fuel resistance.
LV Concentrate is formulated to be
job-mixed with water and
aggregate.
Basic Uses:
SealMaster LV
Concentrate is designed to
beautify and protect asphalt
pavement sur faces including
parking lots, airports, driveways,
shopping malls, roadways, and
more.
Composition: SealMaster LV
Concentrate is a asphalt and coal
tar emulsion blend pavement
sealer fortified with special
surfactants to promote superior
adhesion. Select aggregate is
job-mixed to produce a slip-resistant
coating.
Sizes: SealMaster LV Concentrate
is available in 4,000 gallon bulk
tankers, 55-gallon drums, and
5-gallon pails.
Color: SealMaster LV Concentrate
dries to a deep, rich black color.
Limitations:
S e a l M a s t e r LV
Concentrate shall not be applied
when temperature is expected to
drop below 50°F at any time within
a 24 hour period after application.
4. TECHNICAL DATA
SealMaster LV Concentrate meets
the performance standards of
ASTM D-2939.
Environmental Considerations:
SealMaster LV Concentrate does
not contain asbestos. SealMaster
LV Concentrate is an environmentally friendly water based
pavement sealer containing less
than 15 grams per liter volatile
organic content (VOC).
Physical/Chemical Properties:
SealMaster LV Concentrate is a
premium quality pavement sealer
that meets the following material
requirements when tested in
accordance with ASTM D 140, ASTM
D 466, ASTM B117, ASTM D 529, ASTM
D 2939, and ASTM D244 procedures.
(see chart below)
5. INSTALLATION
Surface must be clean and free
from all loose material and dirt.
Pavement surface repairs should
be made with a suitable hot or cold
asphalt mix. Cracks should be filled
with SealMaster hot pour or cold
applied crack fillers. Treat all grease,
oil, and gasoline spots or stains with
SealMaster Petro Seal™ or Prep
Seal™.
Methods:
S e a l M a s t e r LV
Concentrate shall be applied by
either pressurized spray application
equipment or self-propelled
squeegee equipment. Pressurized
spray equipment shall be capable
of spraying pavement sealer with
sand added. Equipment shall
have continuous agitation or
mixing capabilities to maintain
homogeneous consistency of
pavement sealer mixture
t h ro u g h o u t t h e a p p l i c a t i o n
process. Self-propelled squeegee
equipment shall have at least 2
squeegee or brush devices (one
behind the other) to assure
adequate distribution and
penetration of sealer into
bituminous pavement. Hand
squeegees and brushes shall be
acceptable in areas where
practicality prohibits the use of
mechanized equipment.
Mixing Procedures:
- For optimum results, SealMaster LV
Concentrate Pavement Sealer shall
be mixed in accordance with the
following mix design (based on 100
gallons for ease of calculation):
SealMaster LV Concentrate.....100 gals.
Water......................................20-25 gals.
Top Tuff Polymer Additive.........1-2 gals.
Sand*..................................300-500 lbs.
*(40-70 mesh AFS rating)
IMPORTANT: The above mix design
is a typical recommendation.
Alternative mix designs may be
substituted to account for local
pavement conditions and use of
other pavement sealer additives.
However, in all cases sand shall be
used in the mix design.
NOTE: Top Tuff is manufactured by
ThorWorks and is available from your
regional SealMaster location.
Application:
For optimum
performance apply two coats of
properly mixed SealMaster LV. A
third coat of mixed SealMaster LV
may be applied to high traffic areas
such as entrances, exits, and drive
lanes.
Application Rate of Mixed
SealMaster LV: Apply properly mixed
SealMaster LV (LV Concentrate,
Water, Sand, Additive) at a rate of
.11 to .13 gallon per square yard (7082 square feet per gallon) per coat.
Estimating Material Requirements:
To estimate gallons of SealMaster LV
Concentrate required to cover a
specific area use the following
coverage rate:
• One gallon of SealMaster LV will
cover approximately 100-120 square
feet (11.1 to 13.3 square yards) per
coat when properly mixed and
applied.
Note: Coverage rates may vary due
to pavement age and porosity.
Precautions: Both surface and
ambient temperature shall be a
minimum of 50°F. Temperature shall
not drop below 50°F in a 24 hour
period following application. New
asphalt surfaces should be allowed
to cure a minimum of four weeks
under ideal weather conditions
(70°F) before applying SealMaster
LV Concentrate. Keep Out Of
Reach Of Children. Do not store
unopened drums or pails in freezing
temperatures.
6. AVAILABILITY & COST
Av a i l a b i l i t y :
S e a l M a s t e r LV
Concentrate is supported by a
nationwide network of SealMaster
manufacturing facilities along with
a national network of professional
applicators.
Cost:
Cost information can be
obtained from a local SealMaster
LV C o n c e n t r a t e a p p l i c a t o r.
Contact SealMaster for the
S e a l M a s t e r LV C o n c e n t r a t e
representative in your area.
7. WARRANTY
SealMaster warrants that SealMaster
LV Concentrate meets the chemical
composition and per formance
requirements set forth in section 4.
Liability to the buyer or user of
this product is limited to the
replacement value of the product
only.
8. MAINTENANCE
Periodic cleaning of parking lot
surface will ensure optimum product
service life.
9. TECHNICAL SERVICES
Manufacturer: Complete product
specifications, material safety data
sheets, and technical assistance is
available from SealMaster.
Professional Applicators: Your local
S e a l M a s t e r LV C o n c e n t r a t e
applicator is available to provide
on-site inspections and
recommendations to meet your
specific needs.
10. FILING SYSTEMS
• Sweet’s Catalog
• Sweet’s CD
• Sweet’s Online
• Sweet’s Directory
• SealMaster Online
Specification at
www.sealmaster.net
• Complete SealMaster
Product and Equipment
Catalog Available
The statements made on this
specification sheet are believed to be
true and accurate and are intended
to provide a guide for approved
application practices. As workmanship, weather, construction, condition
of pavement, tools utilized, and other
variables affecting results are all
beyond our control, the manufacturer
warrants only that the material
conforms to product specifications
and any liability to the buyer or user
of this product is limited to the
replacement value of the product
only. The manufacturer expressly
disclaims any implied warranties of
merchantability or fitness for a
particular purpose. Warranty is void
on multi-coat applications if material
made by other manufacturers is used
with this product.
Form No.: SMT-120
Revised: 9/13
Supersedes: SMT-120 (7/05), (12/12),
(6/13)
Copyright © 2013, SealMaster
All Rights Reserved.
SealMaster
Phone: 1-800-395-7325
www.sealmaster.net