See MP Ordering Matrix
on pages 22-23
The Lighting Suspension Specialists www.PendantSystems.com P-215-638-8552
Mono Point System Highlights
F-215-638-8554
High Bay Cord Feed
High Bay Swivel Stem Feed
High Bay Fixed Stem Feed
Custom Extruded Slot to
accept the Half Ball End
Cables to allow Cable
Swiveling Action
Exit Cord Feed W/Exit Bracket
Fixture Gripper Attachment
Can Vary
MP Crossbar W/ MP Plate 3/8IP
MP Crossbar
MP Plate 3/8IP
Mono Point Product Features









HB Plate & Swivel Clip
Ceiling Canopy Mounting
Single Point Mounting System for Feed and Fixture Support from a center location
Retrofitting existing High Bay HID Systems is easier
Mounts to 4" square and 4" octagonal boxes easily with universal mounting pattern screw hole slots to vary the
positioning of the fixture
Custom extruded cable slot holders to allow cable to swivel outward to ends of fixture
Low profile
Interchangeable center mounting plate with 1/8' IP, 1/4" IP, 3/8" IP, 1/2"IP & Half Ball Swivel Plate
Cord or Stem Power Feed to fixture
Stem fixed or swivel mounted to give more stability in air movement situations
Can be used with side support cables or stand alone stem mounting for use as a normal stem configuration
Applications





High Bay Cord or Stem Feed (Fixed or Swivel)
Direct / Indirect Cord or Stem Feed
Exit Cable or Stem Mount
LED or Cylinder 2-point Mount
Parking Garage Retrofit with Center Fixed or Swivel Stem Feed & Stainless Cables to minimize movement
Finishes
White, Black, Nickel, Brushed Nickel
Patent Pending Pendant Systems Manufacturing Co. 2013
13
See MP Ordering
Matrix on
pages 22-23
The Lighting Suspension Specialists www.PendantSystems.com
P-215-638-8552
F-215-638-8554
Mono Point High Bay Cord Feed System
Mono Point High Bay Cord Feed Product Features









Single Point Mounting System for feed and fixture support from a center location
Retrofitting existing High Bay HID Systems is easier
Mounts to 4" square and 4" octagonal boxes easily with universal mounting pattern screw hole slots to vary the
positioning of the fixture (50 lb. maximum weight load per NEC 314.27)
Custom extruded cable slot holders allow cable to swivel outward toward ends of fixture for support
Adjustable height and low profile for a clean look
18/3, 18/4, 18/5 or 18/6 type cord can be included in kit
A strain relief is provided for .290”-.385” diameter cables for fixture & canopy with .875” knock out openings
Various grippers for fixture attachment are available. See Mono Point Ordering Matrix for Part #’s
1/16” HB End Cable Lengths of 24” & 36” Stainless and 50”, 60”, 120”, 180”, 240” Galvanized Available
Applications


High Bay Lighting , Direct / Indirect Lighting, LED or Cylinder 2-point Mount
Static (stationary loads only), Not Dynamic (swaying or wind conditions not recommended)
Finishes
Example Part #’s of Above Illustration
White Canopy, Galvanized MP-Crossbar
Part Numbers
See Mono Point Matrix on for Catalog Numbering System
p. 22-23
Patent Pending Pendant Systems Manufacturing Co. 2013
14
Length
W/18/3 Cord
No Cord
60”
MP15/60-16 36PD 18/3SJT
MP15-/60-16 36PD
120”
MP15/120-16 36PD 18/3SJT
MP15/120-16 36PD
180”
MP15/180-16 36PD 18/3SJT
MP15/180-16 36PD
240”
MP15/240-16 36PD 18/3SJT
MP15/240-16 36PD
See MP Ordering
Matrix on
pages 22-23
The Lighting Suspension Specialists www.PendantSystems.com P-215-638-8552
F-215-638-8554
Mono Point High Bay Stem Feed System W/Cable End Support
Mono Point High Bay Stem Feed Product Features









Single Point Mounting System for feed and fixture support from a center location
Retrofitting existing High Bay HID Systems is easier
Minimizes fixture movement and cables provide end support to fixture
Mounts to 4" square and 4" octagonal boxes easily with universal mounting pattern screw hole slots to vary the
positioning of the fixture (50 lb. maximum weight load per NEC 314.27)
Custom extruded cable slot holders allow cable to swivel outward toward ends of fixture for support
Adjustable height and low profile for a clean look
Stem lengths are fixed and available in 1/4”IPS, 3/8”IPS & 1/2”IPS diameters. (Stems must be ordered separately).
Various grippers for fixture attachment are available. See Mono Point Ordering Matrix for Part #’s
1/16” HB End Cable Lengths of 24” & 36” Stainless and 50”, 60”, 120”, 180”, 240” Galvanized Available
Applications


High Bay Lighting , Direct / Indirect Lighting, LED or Cylinder 2-point Mount
Static (stationary loads only) Not Dynamic (swaying or wind conditions not recommended)
Finishes
White Canopy, Galvanized MP-Crossbar
Part Numbers
See Mono Point Matrix for Catalog Numbering System p.22-23
Patent Pending Pendant Systems Manufacturing Co. 2013
Example Part #’s of Above Illustration
Length
Order Stems Separately
60”
MP15/60-16 36PD ST1/2
120”
MP15/120-16 36PD ST1/2
180”
MP15/180-16 36PD ST1/2
240”
MP15/240-16 36PD ST1/2
15
See MP Ordering
Matrix on
pages 22-23
The Lighting Suspension Specialists www.PendantSystems.com
P-215-638-8552
F-215-638-8554
Mono Point High Bay Swivel Stem Feed System W/Cable End Support
Mono Point High Bay Swivel Stem Feed Product Features










Single Point Mounting System for feed and fixture support from a center location
Retrofitting to existing HID Systems for High Bay is easier
Minimizes fixture movement and cables provide end support to fixture
Mounts to 4" square and 4" octagonal boxes easily with universal mounting pattern screw hole slots to vary the
positioning of the fixture (50 lb. maximum weight load per NEC 314.27)
Custom extruded cable slot holders allow cable to swivel outward toward ends of fixture for support
Adjustable height and low profile for a clean look
Stem lengths are fixed and available in 1/4”IPS, 3/8”IPS & 1/2”IPS diameters. (Stems must be ordered separately).
Swivel Rotation depends on the size of stem. 1/4”IPS (45°), 3/8”IPS (36°) & 1/2”IPS (36°)
Various grippers for fixture attachment are available. See Mono Point Ordering Matrix for Part #’s
1/16” HB End Cable Lengths of 24” & 36” Stainless and 50”, 60”, 120”, 180”, 240” Galvanized Available
Applications


High Bay Lighting , Direct / Indirect Lighting, LED or Cylinder 2-point Mount
Static (stationary loads only), Not Dynamic
(swaying or wind conditions not recommended)
Example Part #’s of Above Illustration
Finishes
White Canopy, Galvanized MP-Crossbar
Part Numbers
See Mono Point Matrix for Catalog Numbering System p.22-23
16
Patent Pending Pendant Systems Manufacturing Co. 2013
Length
Order Stems Separately
60”
MP15/60-16 36PD SW3/8
120”
MP15/120-16 36PD SW3/8
180”
MP15/180-16 36PD SW3/8
240”
MP15/240-16 36PD SW3/8
See MP Ordering
Matrix on
pages 22-23
The Lighting Suspension Specialists www.PendantSystems.com P-215-638-8552
F-215-638-8554
Mono Point Field Adjustable Swivel Stem Feed System W/Cable End Support
Mono Point Field Adjustable High Bay Swivel Stem Feed Product Features












Single Point Mounting System for feed and fixture support from a center location
Retrofitting to existing HID Systems for High Bay is easier
Minimizes fixture movement and cables provide end support to fixture
Mounts to 4" square and 4" octagonal boxes easily with universal mounting pattern screw hole slots to vary the
positioning of the fixture (50 lb. maximum weight load per NEC 314.27)
Custom extruded cable slot holders allow cable to swivel outward toward ends of fixture for support
Adjustable height and low profile for a clean look
Stem lengths are fixed and available in 1/4”IPS & 3/8”IPS diameters. (Stems must be ordered separately).
Swivel rotation depends on the size of stem. 1/4”IPS (45°) & 3/8”IPS (36°)
Field Cut Adjustable System allows cutting and pinning stem to desired height without threading stem
Drill Bit & Allen wrench are included (Tool Kit)
Various grippers for fixture attachment are available. See Mono Point Ordering Matrix for Part #’s
1/16” HB End Cable Lengths of 24” & 36” Stainless and 50”, 60”, 120”, 180”, 240” Galvanized Available
Applications


High Bay Lighting , Direct/Indirect Lighting, LED or Cylinder 2-point Mount
Static (stationary loads only) Not Dynamic
(swaying or wind conditions not recommended)
Finishes
White Canopy, Galvanized MP-Crossbar
Part Numbers
See Mono Point Matrix for Catalog Numbering System
pages 22-23
Patent Pending Pendant Systems Manufacturing Co. 2013
Example Part #’s of Above Illustration
Length
Order Stems Separately
60”
MP15/60-16 36PD SW3/8ADJ
120”
MP15/120-16 36PD SW3/8ADJ
180”
MP15/180-16 36PD SW3/8ADJ
240”
MP15/240-16 36PD SW3/8ADJ
17
See MP Ordering
Matrix on
pages 22-23
The Lighting Suspension Specialists www.PendantSystems.com
P-215-638-8552
Mono Point Exit Cord Feed System
F-215-638-8554
Mono Point Exit Cord Feed Product Features









Single Point Mounting System for feed and fixture support from a center location
Height adjustments of Exit Sign can be done with ease
Minimizes fixture spinning as cables provide fixture support at two points
Mounts to 4" square and 4" octagonal boxes easily with universal mounting pattern screw hole slots to vary the
positioning of the fixture (50 lb. maximum weight load per NEC 314.27)
The Exit Bracket is adaptable to most signs because it has multiple tapped holes for different mounting patterns
Adjustable height and low profile for a clean look
MGR-SE 8/32 Gripper attaches to Exit Bracket for height adjustment
1/16” HB End Cable Lengths of 24” & 36” Stainless and 50”, 60”, 120”, 180”, 240” Galvanized Available
18/3 SVT Cord with CG Cap compression strain relief allows installer to make fine adjustments of height
Applications


Exit Sign Cable Mount
Static (stationary loads only), Not Dynamic (swaying or wind conditions not recommended)
Finishes
Example Part #’s of Above Illustration
White, Black, Nickel & Brushed Nickel Canopy, Galvanized MP-Crossbar Length
Order Stems Separately
60”
MP23/60-16 EX 18/3SVT
See Mono Point Matrix for Catalog Numbering System p. 22-23
Patent Pending Pendant Systems Manufacturing Co. 2013
120”
MP23/120-16 EX 18/3SVT
180”
MP23/180-16 EX 18/3SVT
18
240”
MP23/240-16 EX 18/3SVT
Part Numbers
See MP Ordering
Matrix on
pages 22-23
The Lighting Suspension Specialists www.PendantSystems.com P-215-638-8552
Mono Point Exit Stem Feed System
F-215-638-8554
Mono Point Exit Stem Feed Product Features





Single Point Mounting System for feed and fixture support from a center location
Minimizes fixture movement
Mounts to 4" square and 4" octagonal boxes easily with universal mounting pattern screw hole slots to vary the
positioning of the fixture (50 lb. maximum weight load per NEC 314.27)
Stem lengths are fixed and available in 1/4”IPS and 3/8”IPS. (Stems must be ordered separately).
The Exit Bracket is adaptable to most signs because it has multiple tapped holes for different mounting patterns
Applications


Exit Sign Cable Mount
Static (stationary loads only), Not Dynamic (swaying or wind conditions not recommended)
Finishes
White & Black Canopy, Galvanized MP-Crossbar
Part Numbers
See Mono Point Matrix for Catalog Numbering System
p. 22-23
Patent Pending Pendant Systems Manufacturing Co. 2013
Example Part #’s of Above Illustration
Diameter
Order Stems Separately
Finish
3/8”IPS
MP ST3/8 EX
White
3/8”IPS
MP ST3/8 EX BK
White
1/4”IPS
MP ST1/4 EX
Black
1/4”IPS
MP ST1/4 EX BK
Black
19
See MP Ordering
Matrix on
pages 22-23
The Lighting Suspension Specialists www.PendantSystems.com
P-215-638-8552
Mono Point Fixed Stem Feed System
F-215-638-8554
Mono Point Fixed Stem Feed Product Features






Single Point Mounting System for feed and fixture support from a center location
Retrofitting existing High Bay HID Systems is easier
Minimizes fixture movement
Mounts to 4" square and 4" octagonal boxes easily with universal mounting pattern screw hole slots to vary the
positioning of the fixture (50 lb. maximum weight load per NEC 314.27)
Low profile with recessed 6/32” painted mounting screws for canopy
Stem lengths are fixed and available in 1/4”IPS, 3/8”IPS & 1/2”IPS diameters. (Stems must be ordered separately).
Applications


High Bay Lighting , Direct / Indirect Lighting, Cylinder & Exit
Static (stationary loads only), Not Dynamic (swaying or wind conditions not recommended)
Finishes
White Canopy, Galvanized MP-Crossbar
Part Numbers
See Mono Point Matrix for Catalog Numbering System
p. 22-23
Patent Pending Pendant Systems Manufacturing Co. 2013
20
Example Part #’s of Above Illustration
Diameter
Order Stems Separately
Finish
3/8”IPS
MP ST3/8
White
3/8”IPS
MP ST3/8 BK
White
1/4”IPS
MP ST1/4
Black
1/4”IPS
MP ST1/4 BK
Black
See MP Ordering
Matrix on
pages 22-23
The Lighting Suspension Specialists www.PendantSystems.com P-215-638-8552
F-215-638-8554
Mono Point Swivel Stem Feed System
Mono Point Swivel Stem Feed Product Features








Single Point Mounting System for feed and fixture support from a center location
Retrofitting existing High Bay HID Systems is easier
Minimizes fixture movement
Mounts to 4" square and 4" octagonal boxes easily with universal mounting pattern screw hole slots to vary the
positioning of the fixture (50 lb. maximum weight load per NEC 314.27)
Stem lengths are fixed and available in 1/4”IPS, 3/8”IPS & 1/2”IPS diameters. (Stems must be ordered separately).
Swivel Rotation depends on the size of stem. 1/4”IPS (45°), 3/8”IPS (36°) & 1/2”IPS (36°)
Available in Field Cut Adjustable System to cut and pin stem to desired height without threading stem for 3/8” &
1/4”IPS sizes (Add Suffix ADJ)
Drill Bit & Allen wrench are included (Tool Kit)
Applications


High Bay Lighting , Direct / Indirect Lighting, Cylinder & Exit
Static (stationary loads only), Not Dynamic
(swaying or wind conditions not recommended)
Example Part #’s of Above Illustration
Diameter Order Stems Separately
Notes
1/4”IPS
MP SW1/4
Finishes
3/8”IPS
MP SW3/8
White & Black Canopy, Galvanized MP-Crossbar
1/2”IPS
MP SW1/2
1/4”IPS
MP SW1/4 ADJ
Field Cut
1/4”IPS
MP SW3/8 ADJ
Field Cut
Part Numbers
See Mono Point Matrix for Catalog Numbering System p. 22-23
Patent Pending Pendant Systems Manufacturing Co. 2013
21
The Lighting Suspension Specialists www.PendantSystems.com
P-215-638-8552
F-215-638-8554
Mono Point System Ordering Matrix
15
60
16
Gripper#
Cable
Length
Cable
Diameter
MP
Mono Point
System
Gripper #
#
Gripper Model #
36PD
18/3SJT
Options
Options
Cable
Exit
Hole
Size
#
Description of Options
8.5”Crosscable W/ #2 HB Ends
1
MGR 1/4-20
Bottom
.250”
8.5HB
2
MGR-SE-1/4-20
Side
.250”
10HB
10” Crosscable W/ #2 HB Ends
3
GR1/4IP-TN
Bottom
.562”
12.5HB
12.5” Crosscable W/ #2 HB Ends
4
GR1/4IP
Bottom
.562”
18HB
18” Crosscable W/ #2 HB Ends
5
GR3/8IP
Bottom
.687”
24HB
24” Crosscable W/ #2 HB Ends
6
GR1/2IP
Bottom
.875”
36HB
36” Crosscable W/ #2 HB Ends
7
GR1/4IP-TN-L
Bottom
.562”
8CC
8”Crosscable with 1/4-20TH Studs
8
MGR-1/4-20-M NK
Bottom
.250”
12CC
12”Crosscable with 1/4-20TH Studs
9
MGR-SE-1/4-20-BS
Side
Cross
18CC
18”Crosscable with 1/4-20TH Studs
10
MGR-SE-ADJ-1/4-20
Side
.250”
11
MGR-SE-ADJ-8/32
Side
.187”
12
MGR1/8IP
Bottom
.400”
13
MGR-SE-1/8IP
Side
.400”
14
MGR-SE-1/4-20-EXT
Side
.250”
15
MGR-SE-TH w/ Crosscable
Side
Cross
16
GR-SE-BF
Side
Cross
17
Micro-GR
Bottom
.312
18
MGR 1/8IP ALL
Bottom
.400”
19
MGR-SE-TH10/32 Block
Side
.250”
20
MGR 10/32
Bottom
.187”
21
MGR-SE10/32 ASS
Side
22
KL-100
23
MGR-SE 8/32
24CC
24”Crosscable with 1/4-20TH Studs
8PD
Paddles on the ends of 8” Crosscable
12PD
Paddles on the ends of 12” Crosscable
36PD
Paddles on the ends of 36” Crosscable
ST1/4
1/4" IPS Fixed Stem Mount
ST3/8
3/8" IPS Fixed Stem Mount
ST1/2
1/2" IPS Fixed Stem Mount
SW1/4
1/4" IPS Swivel Stem Mount
SW3/8
3/8" IPS Swivel Stem Mount
SW1/2
1/2" IPS Swivel Stem Mount
SW1/4ADJ
1/4" IPS Swivel Stem Mount ADJ Cut Down System
SW3/8ADJ
3/8" IPS Swivel Stem Mount ADJ Cut Down System
.250”
TK
ADJ Tool Kit (Allen Key & Drill Bit)
Two-way
N/A
TS25
TS 1/4”-20 Slot-.25 (Threaded Screw with Slot– .25” L)
Side
.187”
TS5
TS 1/4”-20 Slot-.50 (Threaded Screw with Slot-.50” L)
18/3 SVT Cord
18/3 SJT Cord
24
MGR-SE 10/32 SM
Side
.187”
18/3SVT
25
MGR-SE 1/4-20-Ext-M
Side
.250”
18/3SJT
26
MGR-Hook
Bottom
Loop
27
GR-SE 1/4 Combo
Side
.25/.5”
28
MGR-SE10/32 ASS ANG
Side
.187”
29
MGR-10/32 NK
Bottom
.187”
30
MGR-SE-ADJ-SHOE
Side
31
32
22
MGR-SE-THW/8"CabDB64
MGR 1/4-20 M
Side
Bottom
.125” w/
slot
.225”
keyhole
.11” hole
diameter
.250”
18/3CL
18/3 Clear Cord
18/3MB
18/3 Metal Braid Cord
18/4SJT
18/4 SJT Cord
18/4CL
18/4 Clear Cord
18/4MB
18/4 Metal Braid Cord
18/5SJT
18/5 SJT Cord
18/5CL
18/5 Clear Cord
18/5MB
18/5 Metal Braid Cord
BK
Black Cord, Strain Relief, Canopy
BN
Brushed Nickel Canopy
NK
Nickel Canopy
EX
Exit Bracket and Base Mounting
The Lighting Suspension Specialists www.PendantSystems.com P-215-638-8552
F-215-638-8554
Mono Point System Ordering Matrix
MP
Mono Point
System
15
60
Gripper#
Cable
Length
16
36PD
Cable
Diameter
18/3SJT
Options
Mono Point Swivel Stem Feed
Cable Diameter
#
Description
16
1/16" Diameter
64
3/64” Diameter
Mono Point High Bay Cord Feed
1/16” Diameter is our Standard
Mono Point High Bay Stem Feed
Line Drawings
of these Hardware assembly sets
are available at the PDF’s /
Drawings link on Home Page
Mono Point Exit Cord Feed
Cable Length
#
Description of Half Ball
Cable Length
24
24” Long Stainless Cable
36
36" Long Stainless Cable
50
50” Long Galvanized Cable
60
60" Long Galvanized Cable
Mono Point Fixed Stem Feed
Mono Point High Bay Swivel Stem Feed
120 120" Long Galvanized Cable
180 180" Long Galvanized Cable
240 240" Long Galvanized Cable
23