PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL & ROLLER BEARINGS AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
Fan ball race, 6cyl. 12/4 and later 9hp
Crankshaft Spigot ball race, sealed 12/4 & 6cyl
Dynamo ball race, sealed 12/4 9hp front
Distributor ball race, front 6 cyl.driving shaft - water pump, not sealed.
Distributor ball race, rear 6 cyl shaft - water pump,sealed.
Distributer thrust spacer (instead of ballrace)
Dynamo ball race, 12/4, 9hp rear sealed & front 6 cyl
Spigot ball race, 9hp up to engine no: 47999
9E206
Spigot ball race, 9hp after engine no: 47999
C1078
Clutch withdrawal race, 9hp (in 3 parts)
9E278 & 9E510
6E201/2/3 Clutch withdrawal race, 6 cyl check for availability
Camshaft thrust race, 6 cyl, 9hp
9E218
Camshaft thrust race, 9hp front fan extension (exhaust)
9F18
Camshaft thrust race 6 cyl front
6E302
Spigot bearing -Big 4 flywheel
Distributor thrust race 9 hp & 12/4 & 6 cyl
6E143
Camshaft end thrust 1932 6 cyl
Starter 6 cyl commutator end
189295
Starter 9hp ball race drive end
9hp clutch withdrawal race bottom washer
9E258
6 cyl clutch withdrawal race bottom washer
6E203
Rear Axle
6E133
6E133S
6E133S
6E265
6E266
A3
A4
A4
A1
A2
D89
A14a
A31
A30
A45
A46
A7
A33
A6
A51
A53
A53
A48
A56
A41
A39
15.81
26.13
26.13
53.33
36.61
8.40
26.91
28.74
24.94
118.13
P.O.A
22.87
22.73
46.62
27.80
14.54
14.54
9.93
11.61
15.75
15.75
18.98
31.36
31.36
64.00
43.94
10.08
32.29
34.49
29.93
141.75
A8
A9
A9a
A18
A11
A12
A13
A18
A16
A37
A58
A17
A17
A55
A59
27.92
28.01
37.88
20.16
69.17
32.82
37.56
20.16
37.19
48.55
51.99
72.31
72.31
52.45
23.07
33.50
33.62
45.46
24.19
83.01
39.39
45.07
24.19
44.63
58.26
62.38
86.78
86.78
62.94
27.68
A55
A20
52.45
21.53
62.94
25.83
A2235
Front hub ball race, inner, all 12/4 & narrow track 6 cyl. All 9hp pre 66 & 67
series. Except those 12/4's with 3/4 king pins
A19
53.80
64.56
A2439
A3092
A3093
Front hub ball race, inner, 12/4 1937/8 narrow track, 9hp 1935/8, 3/4" King
Pin axles only
Thrust race steering column top (all models)
Steering column bottom journal bearing
A23
A26
A1
46.78
29.17
53.33
56.13
35.00
64.00
A1104
A1172
A1485
A1408
A1106
A1105
A1108
A1102
A1478
A1479
A1103
A1103
A1480
Steering
Propshaft ball race, front (all models) except open prop
Rear hub ball race, 9hp Mk IV on, 12/4, 15/6
Sealed Rear Hub Ball Race
Rear hub ball race, 9hp Merlin, 66 & 67 series & 12/4 Victor
Pinion shaft roller race, adjacent to gear
Pinion shaft ball race, adjacent to gear
Pinion ball race, tail shaft rear
Journal bearing (Differential box)
Pinion tailshaft thrust race
Rear axle pinion roller bearing 9hp 66 & 67 series open prop
Rear axle pinion double bearing 9hp 66 & 67series open prop
Pinion shaft thrust race
Differential housing thrust race
Rear hub ball race Big 4 & V8
Taper roller bearing diff thrust open prop Merlin series 66 & 67M &66K
Front hub inner ball race, Big 4, 15/6 & Autovia & V8
Front hub outer ball race, all models (not Stelvio)
A2438& A2125
Blue Diamond Services Parts List
Last Updated 17/10/2014
27.44
27.28
55.94
33.36
17.45
17.45
11.92
13.94
18.90
18.90
1 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
& ROLLER BEARINGS AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
Gearbox
9G161
9G162
9G164
Brakes
Silent 3rd rear ball race
Silent 3rd front ball race
Overdrive main shaft ball race
Overdrive tail shaft ball race
Overdrive clutch shaft ball race
1/2" Thrust ball silent 3rd
A13
A35
A22
A28
A5
R54
37.56
27.98
21.07
13.90
44.75
0.95
Brake pulley ball race 6 cyl 33 & 34 (sealed)
A2202
A24
8.40
ENGINE PARTS 9HP
Please note many parts are common to several engine types, please follow the instructions below.
9hp 12 & 14/6 parts common with 9hp marked with an asterisk*
12/4 parts common with the 9hp marked with a dagger †.
15/6 parts common with 9hp marked with #.
9E345
9E307
8E106
9E280
Perforated steel sheet for sump gauze (9hp)
9 hp Breather kit
Later intermediate timing wheel pin * (oversize +20 available)
Washer thrust, intermediate gear shaft *# (pegged)
Washer crankshaft thrust
Tube hot spot (exhaust by-pass pipe) 9E388 & 9SE384
Manifold Brooklands type twin carb (no hot spot) for vertical or horizontal
flange carbs
Pin, Crank pinion taper NO:5 †
9E315
Nut, flywheel
9E192
Nut, rocker box * (domed)
9E313
Key, crank pinion ( Woodruff key 'A' ) †
9E215
Key, crank flywheel ( Woodruff key 'G' )
8E12
Eccentric arm, oil pump * (Please state width of large link eye)
9E421
9E1089&49 Pump, oil recon, exch. (pre Merlin)
Oil pressure release valve plunger *
9E179
Oil pressure release valve spring early 9hp
9E139
Oil pressure release valve spring 9hp engine no. 42000 on
9E463
Oil pressure release valve Merlin
9E705
Oil pressure release valve spring Merlin
9E725
Rubber ring for oil pump *
9E131
Oil filter element, Merlin 9hp
9E754
6 Cyl, 9 hp & early 12/4 & 15/6 sump plug # * †
9E453
Sub-sump kit* inc. studs
Yoke, water pipe including stud to suit † (Please state stud length)
9E146
Brass dome water pipe nut †
9E312
Pipe, top water
8E56
Pipe, side water
9E30
Pipe, side water (sloping radiator models)
9E451
Pipe, side water Merlin † 22T 12/4 & 26L& F
D6419
Push rod*
9E79
T' piece for external rocker feed
Circlip, gudgeon pin-set/8 * (pre Merlin) #
9E374
Circlip, gudgeon pin-set/8 Merlin
9E759
Blue Diamond Services Parts List
Last Updated 17/10/2014
45.07
33.58
25.29
16.68
53.70
1.14
10.08
Steel 9hp
E86
E77
E6
E10
E3
15.15
27.53
47.97
3.91
11.03
5.74
18.18
33.04
57.57
4.69
13.23
6.89
E7
E12
E9
E34
E11
E13
E26
E28
E45
E44
E67
E46
E66
E82
E64
E90
E78
E40
E47
E61
E60
E109
E217
E41
E138
E27
E51
63.00
1.20
12.60
2.64
1.16
2.74
24.37
84.00
4.32
3.52
2.63
6.63
1.96
2.22
18.90
4.74
36.75
8.25
3.16
36.65
43.00
43.05
47.99
9.67
5.00
2.35
2.35
75.60
1.44
15.12
3.17
1.39
3.29
29.24
100.80
5.18
4.22
3.15
7.95
2.35
2.66
22.68
5.69
44.10
9.90
3.79
43.97
51.60
51.66
57.58
11.60
6.00
2.82
2.82
2 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
AS Head
FITTED
TOBSP
ENGINE,
AXLE, STEERING
Plug, BEARINGS
crankshaft hex.
1/8"
- set 4GEARBOX,
Hex Socket REAR AXLE, FRONTE35
9E203 & ROLLER
8.61
Plug, crankshaft hex. Socket 5/8" dia - set 4
9E460
E37
10.04
Plug, crankshaft, Merlin 3/4" dia - set 4
9E536
E68
10.04
Key, camshaft * † # ( Woodruff key 'A' )
9E232
E11
1.16
Thrust spacer camshaft (E218 substitute) * #
E14
11.78
Mag key & fan pulley key † ( Woodruff key NO: 3 )
9E231
E274
0.49
Thrust pad only for camshaft 3 ball thrust race
H35
E25
3.70
3 ball thrust cage
H36
E134
10.45
Cam follower ( tappet )
9E61
E89
14.70
Ball, throttle joints, cup only (replacement for obsolete original) # * †
E1
6.30
Ball pins, throttle & advanced/retard # * †
E2
4.25
Rev. counter drive pin for cam end # * †
9E485
E344
8.40
Cam shaft nut, early tab washer * # † - per pair
9E202
E59
0.90
Cam shaft nut, late tab washer * # † - per pair
9E371
E49
0.90
Lag tappet †
9E63
E256
11.84
Lag tappet spring †
9E138
E257
2.11
Spring exhaust camshaft thrust set/4 fan engine only
9F17
E23
7.89
Spring camshaft thrust exhaust and inlet * #
9E361
E24
3.60
Clamps, rocker box lid complete with hand wheels and nuts per pair
E79
65.52
Magneto pinion sleeve nut
8E102
E131
12.60
Cylinder liners *
E114
29.83
Rocker distance spring † #
9E165
E268
3.73
Rocker clamp bolt * # † hex. head
E608
E32
2.11
Rocker Shaft set of 4
9E353
E33
94.50
Guide, valve for double valve springs * # †
S/8E65
E5
7.89
8E65(R202) Guide valve original single spring pattern * # †
E5a
6.84
Valve (1 5/16th head) split collett type * #
8E64
E70
14.70
Valve spring, single * # set of 8
9SE137
E72
22.58
Spring valve double * set of 16 # *
E112
47.97
Colletts valve cap (per pair) split type * # †
E228
2.70
Valve spring cap for split colletts * #
E53
4.37
Valve rocker adjusting ball pin * # † short, standard
9E66
E291
5.79
Nut cylinder head, deep 3/8" BSF * # †
E802
E419
1.32
Big end bolt pre Merlin 9hp per 8
4482/39
E69
48.23
6E40/1 R177Big end bolt Merlin * # †
E283
6.84
Big end nut * # †
9E173
E99
1.44
Fan pulley
9F10
E101
39.69
E809(R26) Nut fan pulley * # †
E265
4.53
Gudgeon pin * #
9SE369
E30
6.30
New camshafts + £9 for inlet cam rev. counter drive
226.80
Distributor drive gear
9E446
E71
26.46
Engine mounting rubber cone 9hp per pair
9E144
L7
17.43
9E533/4/5 Engine mounting rubber set 9hp & 12/4 5 pieces †
L23
25.94
Starter ring gear
E107
0.00
Late 9hp & 12/4 dip sticks †
9E458
E129
13.13
Small end bush * # pre-Merlin
9E157
E43
6.30
Blue Diamond Services Parts List
Last Updated 17/10/2014
10.33
12.05
12.05
1.39
14.14
0.59
4.44
12.54
17.64
7.56
5.10
10.08
1.08
1.08
14.21
2.53
9.47
4.32
78.62
15.12
35.80
4.47
2.53
113.40
9.47
8.21
17.64
27.09
57.56
3.24
5.24
6.95
1.58
57.88
8.21
1.73
47.63
5.44
7.56
272.16
31.75
20.92
31.12
0.00
15.75
7.56
3 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
& ROLLER
BEARINGS
FITTED
TOan
ENGINE,
REAR AXLE, FRONT AXLE, STEERING
12/4 (parts
common
with 15/6AS
marked
with
asteriskGEARBOX,
*)
IMPORTANT: A lot of 12/4 parts are also 9hp parts and are marked with a † under 9hp
R106
R105
R96
R193
R138
R192
R197
R195
D5650
D6419
R618
R328
D6531
R619
NO:2
R274
R89
R75
R752
R277a
R68
R230
R229
R64
6E533A/B
R136
R314
R216
Spring, oil pressure relief valve * also 29S & D & Big 4 & 16hp
Valve, oil pressure relief * also 29S & D (plunger) & Big 4 & 16 hp
Filter, oil conversion to, modern filter * inc. adaptor, gasket & filter
Filters for oil filter conversion *
Plug crankshaft oilway hex socket 5/8" BSF
Oil feed bolt
Sump plug and washer (for all sump plate later 12/4 & 15/6) *
Tube, hot spot exhaust manifold to inlet elbow
Tube, hot spot conduit press fit cyl block
Tube, hot spot conduit press fit in cyl head *
Tube, hot spot exhaust manifold to inlet manifold (Hotspot return tube)
Elbow, hot spot (Hotspot outlet)
Manifold inlet aluminium twin carb pre cross flow
Pipe, side water 22T, 26F & L
Pipe, water side all water pump 12/4's
Pipe, water top 22T Kestrel, Lynx & 26L
Pipe, side water 26A & 26K only
Pipe, steel water pump to thermostat
Waterpipe 12/4 for, water pump to side water pipe, steel flanged
'0' ring for E333 (water pipe to pump)
Sump sender unit blanking plate *
E205
E206
E282
E329
E212
E302
E307
E207
E208
E209
E211
E210
E216
E217
E218
E219
E221
E330
E333
E310
E345
2.64
10.92
102.82
5.80
4.11
7.89
3.59
4.20
4.20
5.25
6.05
15.75
73.50
47.90
42.81
33.60
33.60
22.05
46.06
1.09
9.45
3.17
13.10
123.38
6.96
4.93
9.47
4.31
5.04
5.04
6.30
7.26
18.90
88.20
57.48
51.37
40.32
40.32
26.46
55.28
1.31
11.34
12/4 & 15/6 exchange oil pump available or yours rebuilt with new shaft and
pump gears, pump body bushed and machined as necessary and new top
bush for cyl block
Oil pump gear key *
Oil pipe banjo (pressure gauge) *
Intermediate timing gear spindle
Oil pump top gear (Driven gear) *
Cylinder liner
E231
E369
E312
E322
E372
367.50
0.41
5.52
61.22
47.25
30.45
441.00
0.49
6.62
73.46
56.70
36.54
Nut as original brass dome chrome plated rocker box (top stud) 5/16"
BSF3/8"hex *
Nut, side stud rocker cover *
Stud for side stud rocker box *
Crankshaft web drilling plug
Bronze intermediate shaft thrust washer
Shaft, rocker
Rocker Banjo Bolt - short (use with hexagonal banjo) *
Rocker Banjo Bolt -long (use with round banjo) *
Rocker lubrication stud *
Valve split collett 1 7/16"
Valve split collett 1 9/16"
Valve, split collett (1 3/8" head)
Valve spring, double * - set 16
12/4 Push rod
Top water pipe 22T + 26F
Valve spring single - per set
E301
E235
Q1
E264
E314
E232
E272
E272a
E280
E202
E203
E204
E285
E261
E348
E365
5.79
2.10
1.85
3.37
6.05
31.50
5.49
5.49
9.03
11.29
14.36
14.36
33.54
13.13
36.65
18.69
6.95
2.52
2.22
4.04
7.26
37.80
6.59
6.59
10.84
13.55
17.24
17.24
40.24
15.75
43.97
22.43
Blue Diamond Services Parts List
Last Updated 17/10/2014
4 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL & ROLLER
BEARINGS
AS FITTED
ENGINE,
AXLE, STEERING
Cap, valve
spring retaining
splitTO
collett
type *GEARBOX, REAR AXLE, FRONTE227
4.37
5.24
Colletts, valve per pair (split type) *
E228
2.27
2.72
Cam follower *
R200
E311
14.74
17.69
Lag tappet threaded plug
E315
6.57
7.88
Front 12/4 crank plug (On pre-war cranks)
E260
3.94
4.73
Key crankshaft centre bearing *
6E77
E271
3.43
4.12
Water pump front cover, machined
R602
E331
87.54
105.05
Water pump impeller
R604
E251
21.00
25.20
Water pump carbon seal
R608
E252
7.71
9.25
Water pump impeller spindle
R607
E253
28.37
34.05
L/H water pump drive bolt (fits to inlet cam)
E250
16.80
20.16
L/H water pump impeller nut
R616
E341
2.64
3.17
Water pump drive coupling
R605
E249
31.50
37.80
Water pump spring
R606
E327
2.11
2.53
Water pump body, machined
R601
E328
115.73 138.88
Special deep nut for 12/4 bell housing *
E214
1.85
2.22
4" Feed pipe for rockers inc solder nipple & nut * also vintage 9 oilfeed
X172
3.70
4.44
Water pump drive bush bronze
E337
37.80
45.36
Water pump spindle stainless 1939 12hp
E213
35.84
43.00
Core plug cylinder head - per pair
E276
1.06
1.27
Tab washer for L/H water pump drive bolt
E248
2.91
3.49
Gudgeon pin
R9
E281
5.25
6.30
Circlip, gudgeon pin - per 8
E287
2.64
3.17
Fan bracket water pump engines
E215
52.50
63.00
Pulley fan, flat
R46
E325
42.00
50.40
Pulley fan. Dished
R614
E326
44.10
52.92
Woodruff key NO:3 , fan pulley
9E231
E274
0.49
0.59
Distributor drive gear
R169
E318
31.50
37.80
Perforated steel sheet for sump gauze
Steel 12/4 15.15
18.18
Hollow bolt 1/8 BSP for oil pressure gauge banjo & 12/4 rear main *
E308
4.79
5.75
15/6 (12/6 & 14/6 parts common with 15/6 marked with asterisk *)
see also under 9hp as many 12/6 & 14/6 parts are common with 9hp
Perforated steel sheet for sump gauze
Pulley fan*
6E218
Springs, damper crankshaft - set of 6 *
6E186
Damper friction disc *
6E184
Plug, crankshaft web - set of 6 *
6E161
15/6 oil pump overhaul, new shaft & gears etc
Crank pinion shoulder ring *
6E243
Crank pinion nut *
6E244
Impeller, 6 cyl water pump bronze *
6E213
Water pump cork gland seal *
6E231
Packing, water pump *
6E230
Water pump distributor gear shaft (See stainless shaft extension)
6E225
Bottom steel water pipe
D6447
Woodruff key crank pinion gear. All 6 cyl.
6E420 / 6E189
Boss, water pump distributor shaft front * when fan pulley not used
6E275
Water pump gland spring *
6E239
Blue Diamond Services Parts List
Last Updated 17/10/2014
Steel 6 cyl
E465
E405
E404
E411
E480
E437
E445
E441
E412
E407
E490
E433
E424
E447
18.02
36.75
32.03
9.69
12.08
367.50
4.20
19.38
17.64
2.59
3.70
112.75
22.05
1.27
4.42
4.20
21.62
44.10
38.43
11.63
14.49
441.00
5.04
23.26
21.17
3.11
4.44
135.30
26.46
1.52
5.30
5.04
5 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL & ROLLER
FITTED
TO ENGINE,
GEARBOX, REAR AXLE, FRONTE413
AXLE, STEERING
Shaft,BEARINGS
water pumpAS
stainless
extension
*
26.25
31.50
Water pump/block rubber washer *
6E233
E479
3.02
3.62
Seal (oil) conversion for gland seal and washers, on water pump
E469&K28 26.25
31.50
Circlips, gudgeon pin - set of 12 *
9E374
E423
3.53
4.24
Distributor drive gear*
6E235
E455
27.76
33.31
6E443/6E85 Engine mounting rubber cone 6 cyl - per pair *
L8
21.00
25.20
Rocker shaft 15/6 - engine set
R249/50
E233
91.73
110.07
15/6 cyl liners
E406
30.87
37.04
15/6 Push rods
E402
9.67
11.60
Damper spring plate retaining split ring
6E176
E420
15.75
18.90
12/6 & 14/6
see also under 9hp& 15/6
6E252/3
9E381
6E277
6E67
6E392
6E254
D5840
Big 4
Starter ring gear
Shafts, rocker - engine set
Relief valve, oil pressure L type engines
L-Type oil pressure relief valve spring
Cam follower
Gudgeon pin 12/6 only
Camshaft end plunger, early type for 1/2" thrust race (1932)
Substitute for later camshaft end plunger to suit 1/2" thrust race 33-34
Triple carburettor inlet manifold, vertical flange
MPH type twin carb Manifold
E485
E427
E451
E448
E458
E470
E466
E467
E426
E462
POA
119.70
12.19
5.13
15.02
5.79
8.28
8.28
131.25
66.15
143.64
14.63
6.16
18.02
6.95
9.94
9.94
157.50
79.38
Core plugs cylinder block Big 4, 16hp & 2 1/2 (1 1/4)
Oil filter - 16HP & RM 2.5
E601
E630
0.56
4.98
0.67
5.98
E615
E226
E622
E623
E632
E205
0.56
7.89
13.23
26.89
47.25
2.64
0.67
9.47
15.88
32.27
56.70
3.17
F15
F20
F17
F18
E359
F1
F1a
F2
E21
E289
E75
48.24
68.25
50.20
52.09
167.71
40.87
45.77
36.60
0.76
414.03
393.06
57.88
81.90
60.24
62.51
201.25
49.04
54.92
43.92
0.91
496.84
471.67
F4
703.50
1.87
844.20
2.24
Core plugs - Cylinder head Big 4 7/8"
Valve guides
R1085
Water pump impeller spindle
Water pump impeller
Valve springs - set
Oil pressure relief valve & spring as 12/4
Exhaust Parts
R188
D6547
A6519
12/4 downpipe & flange (loose) narrow track (D6420) & wide track
9hp downpipe early & late
Downpipe 14/6 -12/6 2 bolt
Downpipe 14/6 -12/6 4 bolt
12/4 cast iron ex. Man - plugging hotspot holes plus £20 + VAT
Silencer box with flange front 9hp
Silencer box with flange front 12/4 & 6cyl
Silencer box, rear 9hp & 12/4 & 6cyl
Gasket, front silencer box flange
12/4 4-branch exhaust manifold
9hp 4-branch exhaust manifold
6 Branch Exhaust ( Stainless) 2 manifolds of 3 pipes, connecting and
downpipe as MPH.
Blocks & studs, bonded rubber suspension 12/4, 15/6, 66 & 67 series 9hp
Blue Diamond Services Parts List
Last Updated 17/10/2014
6 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
BEARINGS
FITTED
TO ENGINE,
GEARBOX, REAR AXLE, FRONTF13
AXLE, STEERING
Original
rubber forAS
exhaust
mounting
as above
D6228& ROLLER
2.07
Step bolt for D6228 rubber
F14
2.30
Clamp, exhaust pipe 1 3/4"
F5
1.60
Tube, 1 5/8" steel, 2m length (to suit silencer boxes) (41.5mm od)
F6
11.26
Pipe intermediate, 12/4 & 15/6 from 22T 1320 and 44T 2310 & Merlin series
D6500/6614 9hp & Widetrack 12/4
F10
29.40
Studs
2.48
2.76
1.92
13.51
1" x 1/4" BSF12/4 & 15/6 Rocker box side studs
Q1
1.85
1 1/2" x 5/16" BSF
Q4
1.90
1 1/2" x 1/4" BSF
Q5
1.81
1 3/4" x 3/8" BSF
Q7
1.79
2" x 1/4" BSF
Q8
3.06
2" x 3/8" BSF
Q9
1.89
2 1/2" x 1/4" BSF
Q10
1.90
2 1/2" x 5/16" BSF (4 off 12/4 ex manifold)
Q11
1.90
3" x 5/16" BSF(2 off 12/4 ex manifold, (3 off 9hp)
Q13
1.90
3" x 3/8" BSF 9hp, 14/6 & 12/6 rocker box & ex man 14/6 & 12/6
Q14
1.90
Cyl head 9hp & 6cyl 3/8" BSF
E711
Q15
2.11
Cyl head 9hp & 6 cyl stepped to 7/16" BSF
Q16
5.23
Cyl head 12/4 3/8" BSF
R562
Q17
2.11
Cyl head 12/4, stepped to 7/16" BSF
Q18
2.38
12/4 centre rocker box studs 5/16" BSF
Q20
2.64
Sump rear 9hp & 6 cyl 1/4" BSF
E725
Q24
2.11
2 1/2" x 3/8" BSF
Q25
2.77
2" x 5/16" BSF
Q26
1.81
6" x 7/16" BSF Axle clamp -per 8
Q27
35.28
7" x 7/16" BSF Axle clamp - per 8
Q31
38.59
8" x 7/16" BSF Axle clamp - per 8
Q32
38.59
ELECTRICAL
Point sets.
Please always give Distributor Number when ordering. Various parts are available for other distributors.
2.22
2.28
2.17
2.15
3.67
2.27
2.28
2.28
2.28
2.28
2.53
6.28
2.53
2.86
3.17
2.53
3.32
2.17
42.34
46.31
46.31
12/4, 15/6, later 9hp, Big 4. 29S, to fit DK4A & DU6A distributors
35.28
D151
7.43
8.92
Post war cars and used as replacements on many pre-war cars, Distributors
numbered DKY4A & DX6A
D152
6.30
7.56
9hp, 1932/3/4 distributors (Lucas/Rotax only) without auto advance. (These
can be converted to later type point sets by changing base to D231 and
fitting D151 points and D174 rotor)
D155
12.60
15.12
12/4, later 9hp, Big 4, 29S.49S
15/6 &DX6A
9hp 1932/34 Lucas distributor only
D171
D172
D174
7.16
18.90
9.71
8.59
22.68
11.66
12/4, later 9hp, Big 4, 29S, 49S & 15/6
Condenser for DX6A
D191
D197
10.50
7.17
12.60
8.61
Rotor Arms
Condensers
Blue Diamond Services Parts List
Last Updated 17/10/2014
7 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
& ROLLER
Distributor
Caps BEARINGS AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
15/6 & DU6A distributors
12/4, later 9hp, Big 4, 29S, 49S (DK4A)
DKY4A distributor
DX6A distributor
BTH Magneto cap
Distributor Bases
12/4, later 9hp, Big 4, 29S, 49S
15/6
D211
D213
D215
D218
D221
31.50
18.38
21.00
29.37
63.00
37.80
22.05
25.20
35.24
75.60
D231
D232
20.48
31.50
24.57
37.80
E131
D425
D84
D104
D82
D103
D100
X107
D83a
D86
D87
D95
E36
D40
D90
D85
D105
15.12
37.80
20.16
25.20
0.53
31.50
22.05
1.92
6.95
2.33
2.53
1.92
5.48
18.90
18.90
D91
E2
E1
12.60
31.50
16.80
21.00
0.44
26.25
18.38
1.60
5.79
1.94
2.11
1.60
4.57
15.75
15.75
POA
134.40
367.50
367.50
4.20
4.25
6.30
D254
D267
D268
D257
D269
D273
D266
D251
D270
D253
D260
D280
5.74
8.93
12.60
4.74
30.98
31.50
0.55
21.00
11.03
22.05
15.75
3.70
6.89
10.71
15.12
5.69
37.17
37.80
0.66
25.20
13.23
26.46
18.90
4.44
Ignition
Mag sleeve nut
BTH magneto control bracket & counter shaft & 2 levers
Coil, 12V with screw in terminal
Lead carrier, HT 9hp
9E470
Cable, black HT (copper core) per foot
Lead carrier, HT (15/6) (requires final finishing)
R299
Lead carrier, HT (12/4) (requires final finishing)
R83
Screws for lead carriers raised cheese head S/S per 4
Connector, unsuppressed black push on
Washers, 10 x copper terminals for distributor cap & coil
Terminal screws, distributor cap - set of 5
Flat type brass HT connector
9E148/471 Spring clip HT lead carrier
Big 4 ignition warning light
Warning light, ignition with clip
Lucas distributor 6 cyl - less cap & rotor
Lucas distributor 4 cyl DK4A - DKY4A - less cap & rotor
4 cyl. Scintilla vertex rebuilt (outright sale)
BTH mag rebuilt outright sale
9E216
All MRN keys available
Ball pins, advance and retard
Ball cup, advance and retard
Dynamo (see also bearings)
8E102
Brush set, 15/6, Big 4, V8, & 16hp
Brush set, Rotax 2 brush
Brush set, Rotax 3 brush
Brush set, 1939 12HP
Dynamo, claw (drive dog)
Dynamo laminated dog, all 6 cyl cars
Dynamo claw woodruff key
Dynamo terminal block for 2 brush dynamos -triangular
Dashboard field fuse handle - Various Depths
Cut out 12V - Subject to availability. Not original type
Regulator 12V, 2 brush (unventilated) dynamos
Bush dynamo commutator end Big 4 + 16HP
Blue Diamond Services Parts List
Last Updated 17/10/2014
161.28
441.00
441.00
5.04
5.10
7.56
8 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
Starter& ROLLER BEARINGS AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
Pinion and sleeve 9HP
Pinion and sleeve 12/4
Spring, 9hp bendix
Spring, 9hp pinion return
Spring, 12/4 pinion return
Spring, 12/4 bendix, 12/4, 15/6, Big 4 & V8
Spring, 12 & 14/6 bendix
Bendix spring bolt 12 & 14/6
Bendix spring bolt tab washer 12 & 14/6
Bendix Friction plunger
Pinion return spring clip early 9hp (starter without pinion return spring)
Terminal stud
Starter push switch (black)
Push/Pull switch (black)
Brush set, 12 &, 14/6
Brush set, 9hp MKIV on
Brush set, 12/4 & 15/6
Brush set, Big 4 & 16hp
Bush, 9hp front (drive end)
Bush, 9hp rear (commutator end)
Bushes, 2, 12/4 & 15/6 front (drive end)
Bush, 12/4 & 15/6 rear (commutator end)
D302
D303
D300
D283
D284
D297
D304
D306
D306a
D305
D312
D341
D295
D342
D307
D285
D286
D287
D293
D291
D292
D290
34.13
34.13
6.83
3.70
3.94
7.89
26.25
3.16
1.06
1.55
5.25
5.52
11.03
15.75
16.28
8.93
15.75
12.60
3.70
3.70
7.35
3.70
40.95
40.95
8.19
4.44
4.73
9.47
31.50
3.79
1.27
1.86
6.30
6.62
13.23
18.90
19.53
10.71
18.90
15.12
4.44
4.44
8.82
4.44
D30
D1
D80
D3
D4
D45
L21
D5
D7
D46
D47
D47b
D52a
D71
D67
L12
D37a
D37b
11.03
47.88
85.68
5.25
5.25
7.89
2.11
6.30
15.75
3.48
6.81
3.70
2.11
7.56
3.89
9.45
31.50
36.75
13.23
57.46
102.82
6.30
6.30
9.47
2.53
7.56
18.90
4.18
8.17
4.44
2.53
9.07
4.67
11.34
37.80
44.10
Lighting
Steering Column Switches - for complete overhaul etc. please ring for further information.
Headlamp
A7674
D7896
Glass 8" flat without clear centre
Glass 8" & 8 1/2" flat with clear centre
Rotax Spiders pair (headlamp with bottom rim screw need modifying)
Medallion, Rotax (state hole size)
Medallion, Lucas
Holder, headlamp bulb (double filament)
Lamp rail bracket rubber washer
Spring clips, headlamp glass per 10
Dipswitch, dash mounting, black, no markings
Bolt, headlamp clamp ring
Bolt, headlamp stem, Lucas & 1935 Rotax (12/4 & 15/6) type
Threaded brass ring for hollow stem bolt
Cork seal
Rim screws, bottom fittings
Rim clip approx 1934 on
Headlamp stem gaiter
4 Terminal Block for column switch.
6 Terminal Block for column switch.
Blue Diamond Services Parts List
Last Updated 17/10/2014
9 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
& ROLLER BEARINGS AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
Sidelamp
Large side lamp glasses - per pair
Medallion, Lucas
Medallion, Rotax
Medallion, Lucas red plastic
Curved 1935/6 Lucas medallion
Holder, sidelight bulb, (double filament) 1934 on
Holder, sidelight bulb (single filament)
Lamp Lucas 1130 (torpedo) complete - chrome & red medallion
Lamp Lucas 1130 (torpedo) chrome with chrome medallion
1130 Side lamp rim screw
1130 Side lamp glass lens and chromium rim
1130 Side lamp conversion kit 1 orange & 1 clear bulb for 2 lamps
Sealing ring 1130 side lamp
Rubber, sidelamp base 1934 models on, per pair Lucas & Rotax
Indicator switch with illuminated lever
ST38 (Pork pie lamp) Stop/indicator rear lamp orange / red lens
Rear lamp, with red glass lens, ST38 repro
ST38 Conversion Kit, pair with brake, side, indicator.
D79
D15
D16
D17
D75
D10
D9
D12a
D12b
D68
D13
D10b
D72
D8
D44
D11
D20
D10a
7.17
3.68
4.42
3.32
4.26
11.61
7.17
56.70
56.70
1.62
15.14
34.13
0.55
1.95
27.43
72.24
38.54
47.78
8.61
4.41
5.30
3.98
5.11
13.93
8.61
68.04
68.04
1.94
18.17
40.95
0.66
2.34
32.91
86.69
46.24
57.33
Flat all rubber
Angled all rubber
With heavy chrome rim
With flat base, chrome rim
D349a
D349b
D349c
D349
8.19
10.51
11.87
9.07
9.83
12.61
14.24
10.89
Sidelight, 12V 5W (single contact) rear & dashlight
Sidelight, 12V 5W (double contact) rear & dashlight
12V 21/5W offset pin indicator stop & tail
12V 21/5W parallel pin indicator stop & tail
12V 21W parallel pin single filament brake or flasher
Headlamp, 12V 36/36W bulb double filament
Headlamp, 12V 36W bulb single filament
12V 2.2W ignition warning light (without resist wire)
Festoon 12V 21W
Festoon 12V 5W
12V 4W small bulb [bayonet fitting)
D51
D52
D53
D54
D55
D56a
D58
D60
D65
D64
D76
0.55
0.70
0.86
1.32
0.86
8.39
4.20
0.59
0.84
0.66
0.63
0.66
0.84
1.03
1.58
1.03
10.07
5.04
0.71
1.01
0.79
0.76
14mm masked plug Sprite cyl hds
14mm standard 12/4, 15/6 & Big 4
14mm - RM & unmasked Sprite hds & 29S & D
18mm 9hp, 12/4 & 6cyl
14mm 2 1/2 litre 49S & post war
D111
D112
D113
D114
D116
2.99
2.39
2.39
4.20
2.39
3.59
2.87
2.87
5.04
2.87
D149
D150
D150a
D121
68.25
77.70
84.00
12.97
81.90
93.24
100.80
15.56
Reflectors
Bulbs
Sparking
Plugs
Wiper Parts
British Berkshire Wiper Arm Parts (Houdaille Suspension Co)
Tandem set for saloons, less wiper blades & pegs
Tandem set for saloons inc wiper blades & pegs
Tandem set for centre fitting wiper motors less blades & pegs
Screen washer twin iet, period Art Deco - chromium plated
Blue Diamond Services Parts List
Last Updated 17/10/2014
10 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL & ROLLER
AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONTD122
AXLE, STEERING
BrushBEARINGS
spring
5.46
6.55
Rack gear
D123
10.24
12.29
Pinion gear
D124
9.19
11.03
Mainshaft
D125
26.25
31.50
Plug pin
D127
1.67
2.00
Berkshire motor packing pieces (angled) 3/8 thick
D128
8.93
10.71
Berkshire motor packing pieces (angled) 3/16 thick
D129
8.93
10.71
All component parts for original Houdaille Suspension Co wiper arms available
10' Berkshire type (clamp fitting) wiper blade
Wiper blades, hook fitting 8"
Rubber pegs, wiper blades per pair
Wiper motor - Big 4 & 1938 12/4 & 15/6 wide track
Rubber seal, windscreen plate
Angled washer chrome plated windscreen plate
Main gear Berkshire motor (Fibre gear)
Plug Berkshire motor
Pull lever for Berkshire motor
Various Electrical
D131
D133
D134
D135
D144a
D120
D143
D126
D150b
4.20
4.74
1.12
60.64
0.57
3.16
6.30
8.40
4.73
5.04
5.69
1.34
72.77
0.68
3.79
7.56
10.08
5.67
Horn mounting bracket
Fuse 35 amp
Fuse 25 amp
ES141P
Box, Lucas black junction 2 terminals, round bakelite
Box, Lucas black junction 4 terminals, round bakelite
Box, Lucas black junction 6 terminals, round bakelite
Battery master switch (original type)
Battery master switch modern type with removable key & cover
Battery master switch-terminal fitting with removable handwheel
Box, single fuse, bulkhead fitment. Trafficators
Ignition, panel light and wiper twist switch - black
Old style flasher unit (3 bayonet fitting)
Fuse, 6 amp for dipping reflector solonoid
Sockets, dashboard black & red - per pair
Plug for dashboard socket 12/4 etc
Brake light switch operating spring
Switch, brake light centre pull
Rotax switch Vintage 9's light/charge lever
Cover steering column switch, rubber (state year of car)
A6976
Fusebox lid in Black, RJF2 etc. 1934/5/6/7 all models. Fettling required
Fuel System
D352
D346
D322
D323
D324
D351
D325
D395a
D395b
D326
D24
D340
D2
D22
D23
B140
D25
D313
D73
D426
21.00
0.32
0.34
4.20
14.28
18.90
37.53
11.55
9.77
15.75
9.26
11.35
1.06
15.49
11.61
4.74
11.03
5.25
8.93
26.25
25.20
0.38
0.41
5.04
17.14
22.68
45.03
13.86
11.72
18.90
11.11
13.62
1.27
18.59
13.94
5.69
13.23
6.30
10.71
31.50
E2
E1
E229a
L30
L1
L3
X158
L22
X5
L4
D321
4.25
6.30
24.26
2.59
2.59
7.89
1.85
2.11
1.05
9.45
76.65
84.00
5.04
5.29
5.10
7.56
29.11
3.11
3.11
9.47
2.22
2.53
1.26
11.34
91.98
100.80
6.05
6.35
A6721
A7491
A6668
A6081
Ball pins, advance and retard
Ball cup, advance and retard
AC fuel pump diaphram
Neoprene petrol & oil resisting hose black - per ft 1/4
Neoprene petrol & oil resisting hose black - per ft 5/16
Filler grommet, petrol 12/4,15/6. Big 4 & Girling brake 9hp cars
Cork gasket for flanged filler on petrol tank
Petrol filler grommet pre 1935 6 cyl & pre 1936 9hp
Push on filter cap gasket
Rubbers, petrol tank mounting - set of 6
SU fuel pump electric
Electronic SU pump
Fork for choke link bar
Choke link opposite spring
Blue Diamond Services Parts List
Last Updated 17/10/2014
X189
X190
11 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL & ROLLER
BEARINGS
AS- FITTED
TO ENGINE, GEARBOX, REAR AXLE, FRONTX AXLE,
SU choke
lever arm
long
182 STEERING
11.29
13.55
SU choke lever arm - short
X 183
9.19
11.03
SU Coupling spring
X149
7.84
9.41
SU banjo bolt. Extra long
X112
6.83
8.19
SU Jets .90
X44
7.97
9.56
SU needles - various
X45
7.56
9.07
SU float needle valve kit
X47a
9.40
11.28
SU carb gasket - 1 1/4"
E374
0.51
0.61
SU carb gasket kit
X7
8.00
9.60
SU banjo filter
3.34
4.01
SU choke return spring
X119
3.31
3.97
Zenith carb gasket, 12/4, 15/6
C1224
E236
0.70
0.84
Carb gasket 9hp
E94
0.70
0.84
Dashpot/ Damper Oil
V7
3.60
4.32
Tank sender gasket {Smiths} electric
D386
0.58
0.69
Tank sender gasket (Hobson telegauge)
X157
0.59
0.71
Choke (plain black knob) 6' cable
X2
10.44
12.52
Petrol filler hose. 51mm dia - price per inch
X116
1.22
1.46
Petrol filler hose 38 mm dia - price per inch
X 185
0.79
0.95
Zenith carb choke barrel gasket
X174
1.12
1.34
Zenith carb choke cable connecting clamp in bronze
X186
4.73
5.67
Zenith 36VH Emulsion block gasket
X111
3.68
4.41
Push pull tap plunger with cork for Autovac
X32a
4.20
5.04
Copper Washers
Box of 300 assorted
10 off 1/4"
10 off 5/16"
10 off 3/8"
12/4 & 15/6 rocker banjo oil feed - set of 4
E108
E18
E16
E17
E273
15.75
1.27
1.44
1.87
1.60
18.90
1.52
1.73
2.24
1.92
PENRITE OILS. We are Agents and Stockists of the Penrite range of oils suitable for pre war cars. This oil has been
highly recommended to us by our customers, most particularly in Australia, who have used it for many years.
These oils have been especially formulated for pre war cars.
PART No. DESCRIPTION
O/No
Nett
Inc VAT
Minimum additive multigrade oil suitable for re-built engines, particularly
those with shell bearings and full flow oil filter conversions
Classic Light HPR30 (20/60) 5 ltrs
Classic Light HPR30 (20/60) 1 ltr
Classic Medium HPR40 (25/70) 5 ltrs
Classic Medium HPR 40 (25/70) 1 ltr
Classic Heavy HPR 50 (40/70) 5 ltr
Running in oil for the critical first 300 - 500 miles of a new engine 5 ltrs
Running in oil for the critical first 300 - 500 miles of a new engine 1 ltr
Blue Diamond Services Parts List
Last Updated 17/10/2014
V31
V34
V35
V36
V41
V29
V30
26.11
6.66
26.51
6.67
26.51
25.68
6.67
31.34
7.99
31.82
8.00
31.82
30.82
8.00
12 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL & ROLLER BEARINGS AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
PART No.
Literature
The Shelsey range are a non-additive multigrade oils suitable for old
engines, not run on detergent oils and any engine without a modern filter
Shelsey Heavy 50 (40/70) 5 ltrs
Shelsey Heavy 50 (40/70) 1 ltrs
Shelsey Medium 40 (25/70) 5 ltrs
Shelsey Medium 40 (25/70) 1 ltrs
Shelsey Light 30 (20/60) 5 ltrs
Shelsey Light 30 (20/60) 1 ltrs
Classic Penrite (20/50) 5 ltrs
SU carb damper oil/dashpot oil
Gear oil 30 5 ltrs
Gear oil 30 1 ltr
Gear oil 40 5 ltrs
Gear oil 40 1 ltr
Transoil 140 - Replaces Castrol D, transmission oil 5 ltrs
Transoil 140 1 ltr
Transoil 90 5 ltrs
Transoil 90 1 ltr
Mild EP 110 Back Axle oil 5 ltrs. Replaces Castrol Hi-Press
Mild EP 110 Back Axle oil 1 ltr
Steering box lube (very thick oil) good for Riley steering boxes 500ml
Graphite grease 500 ml
High melting point grease 500 gms
Camshaft assembly lube 40 gms
Evans Vintage Waterless Coolant 5 ltrs
Evans Prep Fluid 5 ltrs
XPCL Upper cylinder lubricant
DESCRIPTION
V14
V15
V10
V11
V12
V13
V33
V7
V18
V19
V16
V17
V21
V22
V28
V20
V23
V24
V9
V3
V2
V37
V101
V100
Y11
O/No
27.66
10.02
26.76
6.66
26.47
6.66
21.13
3.62
26.12
6.67
26.51
6.70
25.06
6.67
25.87
6.67
26.55
6.71
6.63
6.49
7.15
4.26
49.67
31.80
18.38
Nett
33.19
12.02
32.12
7.99
31.76
7.99
25.35
4.34
31.35
8.00
31.82
8.04
30.08
8.00
31.05
8.00
31.87
8.05
7.96
7.79
8.58
5.11
59.60
38.17
22.05
Inc VAT
Sales & Service bulletins, (confidential to Riley distributors and sub agents).
Vol 1 1933 (Reprint 155 Pages)
Sales & Service bulletins. Vol 2 1936 - 1938
Mk IV plus & plus ultra instruction book
12/4 1 1/2 litre instruction book
22T 12/4 & 44T 15/6 parts book
1934 Riley 9 parts book
MK I to IV 9hp parts book
Merlin 9 parts book
9 hp parts book 1931 - 1933
9 hp instruction book 1933 - 1935 (Nine)
Z301
Z302
Z158
Z159
Z160
Z161
Z163
Z165
Z168
Z170
15.75
15.75
13.13
7.89
7.89
7.89
7.89
7.89
7.89
13.13
No VAT
No VAT
No VAT
No VAT
No VAT
No VAT
No VAT
No VAT
No VAT
No VAT
4.42
4.42
7.89
1.58
34.61
7.88
No VAT
No VAT
No VAT
No VAT
No VAT
No VAT
No VAT
Various instruction leaflets, copy instruction and parts books are available
upon request
Armstrong Siddeley pre-selector gearbox instructions
ENV pre selector gearbox instructions
12/6 and 14/6 parts book
Wiring Diagrams, state requirements
Reprint: Haddleton Riley Maintenance Manual
14/6 L-Type instructions
Blue Diamond Services Parts List
Last Updated 17/10/2014
Z214
Z213
Z164
Z304
Z173
13 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
ROLLER BEARINGS
Shock&Absorbers
& Linkage AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
A5022
A5020
A5062
A5130
A5315
A5042
A5043
A5320/1
Pin, Luvax link arm 12/4, 15/6 & Big 4 short (& Silken torque tie bar)
Pin, Luvax link arm 12/4, 15/6 & Big 4 long
Pin, Luvax link arm Girling brake 9hp and Victor 12/4 Luvax
Pin, link arm early 9hp, 1933-35
Bush, Luvax link rubber small, Merlin 9hp, '37 Monaco, 66K & Victor
M1
M3
M16
M4
M2
7.89
10.50
6.84
6.83
3.16
9.47
12.60
8.21
8.19
3.79
Bush, Luvax link rubber large & Hartford arm eye bush. Also tie bar rubbers
for cars with Silken torque engine mountings (1937/8)
Hartford front axle bracket bolt
Hartford frame bracket bolt
Hartford cone nut
Rear Hartford shock absorber connecting bolt
Rear shock absorber axle bolts studs 1/2" BSF & 3/8" BSF, hex section
Bracket, front axle RH, Hartford
Bracket, front axle LH, Hartford
Bracket, front shock absorber frame (less pin) - per pair
Hartford arm rubber bush inner steel sleeve
M5
M7
M8
M18
M30
M28
M9
M10
M15
M25
3.02
10.50
10.50
3.16
13.13
10.34
15.75
15.75
23.21
3.16
3.62
12.60
12.60
3.79
15.75
12.41
18.90
18.90
27.85
3.79
B25
B26
B14
B15
B16
B2
B39
B3
B4
B5
B125
B36
B32
B37/8
B6
B7
B7a
B33
B34
B8
B9
B17
B17A
B30
B31
B10
B12
B18
B22
B23
47.02
48.94
3.84
2.91
16.80
16.28
4.45
15.23
0.58
0.63
0.59
0.59
3.64
16.00
2.43
3.70
3.70
5.20
16.52
14.18
6.84
7.41
2.64
7.10
7.89
1.32
54.60
1.32
2.11
17.01
56.42
58.73
4.61
3.49
20.16
19.53
5.34
18.27
0.69
0.76
0.71
0.71
4.37
19.20
2.92
4.44
4.44
6.24
19.82
17.01
8.21
8.89
3.17
8.52
9.47
1.58
65.52
1.58
2.53
20.41
Brake Parts
(a) Cable Brakes
A1100
A2268
A2245
A2210
A1222
A2226
A4126
A4123
A4092
A1099
A4093
A2087/8
10F176
A2014
A2014
A4159/46
A4157
A4191/81
A2173
A4084
A2224
A2225
A4121
A1326
A2092
10BA73
Linings & rivets, 8 rivet shoe - axle set
Linings & rivets, 13 rivet shoe - axle set
Cable return spring Mk 4 on
Shoe return spring Mk 4 on
Handbrake return spring
Pulley, front axle later cars
Mk.IV front axle pulley pin
Pulley, front axle, early cars & compensator bracket
Clevis pin, 5/16" x 1" overall length
Clevis pin, 3/8" x 1" overall length
Clevis pin 1 1/2" x 1/4" cable brake double pull off spring conn, pin
Clevis pin 3/8" x 1 1/4" Mk IV
Cable brake shoe spacers for hardened pads
Front brake cable return spring lever - per pair
Rubber bush, brake steady for torque tube clips also Girling
Cotter, front brake operating cam lever (special)
Cotter, rear brake operating cam lever (special)
Spring, cable clamp
Cable clamp
Cable, brake - 7 metre length (6cyl & 9hp)
Stud, brake cable retaining
Pulley wheel pivot pin
Oilite bush for pulleys
Pulley wheel pivot pin (on axle bracket)
Pulley wheel pivot pin (on bottom pulley wheel bracket)
Spring, brake adjuster
Back plates, 1934/35 aluminium rear - per pair
Leather washer, brake operating cam
Screw, brake drum fixing - per 8
Handbrake ratchet plate
Blue Diamond Services Parts List
Last Updated 17/10/2014
14 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
& ROLLER
BEARINGS AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
(b) Girling
Rod Brakes
A4360
A4344
GB328
GB
GB390
GG/4/1
A4354
A4350
A4365
A4343
A4356
A4328
A4327
A4331/6
A4329
GB1268
GB305
GB38
A4358
A4345
GB303B
GB303A
GB59/B
G269
G1326
A4403
A4334
A4440
A4379
5/16 high tensile steel brake rod - per foot
1/4 high tensile steel brake rod - per foot
Sprite rear compensator bracket
Unequal hole fork end, 1/4" thread
Unequal hole fork end for rectangular tube
Front brake rod large fork end 1/4" BSF
Fork end, 1/4" x 1/4" BSF
Linings, brake with rivets all 12/4's (not Victor) (axle set)
Linings, brake & rivets (66M, K, S67M, Z & C & Victor) (axle set)
12/4 brake shoe return spring
Linings, brake & rivets - axle set, Big 4
Big 4 brake drum counter sunk screw
Sliding joint, brake push rod (plunger)
Spring, plunger
Tube end replacement, plunger joint
Cover for brake push rod (neoprene) plunger joint
Compensating lever, pedal complete assy
Sprite brake central cross shaft
Pins, brake balance lever 3/8" diameter in EN16, 1 5/8" Dia
Pins, brake balance lever 3/8" diameter in EN16, 2 11/16" Dia
Pins, brake balance lever 3/8" diameter in EN16, 4 1/8" Dia
B109
B110
B111
2.64
2.11
38.22
9.45
10.50
16.80
7.12
44.57
39.67
2.58
51.45
2.64
31.50
2.11
8.98
6.84
72.35
278.25
8.40
9.84
11.28
3.17
2.53
45.86
11.34
12.60
20.16
8.54
53.49
47.60
3.10
61.74
3.17
37.80
2.53
10.77
8.21
86.81
333.90
10.08
11.81
13.53
Pin, front balance lever bracket, 1/2" dia. Some 12/4 narrow track and most
wide track (EN8)
Bushes, brake swivel for 1/2" dia pins
Bushes, brake swivel for 3/8" dia pins
Link bar
Front brake balance lever
Front brake boot rivets x12
Brake shoe anchor stud
Rear expander dust cover cap early 12/4 & 15/6 & felt washer
Cover, dust rear
Cover dust, front with rivets - leather
Front dust cover backing plates with rivets
Barrel nut, brake rod 1/4" BSF
Barrel nut, brake rod 5/16" BSF
Roller, expander
B112
B113
B114
B142
B180
B171
B174
B169
B120
B122
B168
B117
B102
B118
4.42
2.66
2.11
3.70
5.54
6.96
2.64
4.20
4.79
5.25
6.02
3.43
3.68
2.64
5.30
3.19
2.53
4.44
6.65
8.35
3.17
5.04
5.75
6.30
7.22
4.12
4.41
3.17
Washers 5/16" double spring for expander housing 8 off (assy must slide on
the brake back plate)
Clevis pin,1/4" long for pedal. Compensating lever pin
Clevis pin,1/4" short for brake fork ends
Clevis pin 1/4". Large head for unequal hole fork ends. 1936 on
Draw link front
Draw link rear
Brass slotted nut for brake expander
Housing, expander front - not 1939 12hp
Cone, expander front & rear (early)
Cone, expander front and rear shouldered type
Transfer shaft (beneath handbrake assy) after 22T & 44Tseries
Pin, expander cone (draw link pin)
Plunger rod large fork end not adjustable (22T)
Threaded plunger tube fork end
22T Handbrake return spring
B121
B123
B124
B162
B126
B132
B163
B127
B135
B135a
B173
B148
B164
B151
B175
1.06
0.47
0.38
3.15
10.50
9.99
3.70
43.57
16.80
16.80
7.89
1.60
21.00
22.05
21.00
1.27
0.56
0.46
3.78
12.60
11.99
4.44
52.28
20.16
20.16
9.47
1.92
25.20
26.46
25.20
Blue Diamond Services Parts List
Last Updated 17/10/2014
B172
B170
B177
B166
B167
B152
B115
B156
B149
B154
B161
B165
B103
B104
B105
B106
B107
15 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
& ROLLER BEARINGS AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
Oil Seals
A1370
A1366
A1365
9G306
C1086
C1086
6E445
A1492
R45
A2108
A1371
A1493
Replacement KO hub seal carrier rear
Alternative front water pump seal 6 cyl
Fan extension seal 9hp replaces 9F20
Torque tube ball clamp, leather ring
Torque tube ball clamp, rubber ring
ENV gearbox front oil seal
Replacement 6-stud wheel rear oil seal carrier for modern seal
Seal for new carrier
Gearbox Armstrong Siddeley speedo take off seal
Gearbox, rear all helical conversion see also R23
New sleeve for K13
Gearbox, all helical front spacer ring 9hp & 1933/34 6 cyl inc K10 seal
Gearbox, all helical early front (2 screw retainer)
Gearbox, silent 3rd front conversion seal. Machine work necessary
Gearbox, silent 3rd rear conversron seal. Machine work necessary
Gearbox, rear overdrive as original with felt & lip seals
Gearbox, front overdrive
K40
K42
K43
K23
K35
K39
K30
K32
K31
K13
R23
K11
K22
K26
K27
K8
K9
42.00
5.25
5.40
9.04
1.06
5.25
42.00
9.22
6.24
9.07
13.65
21.00
4.20
12.75
6.30
33.85
5.81
50.40
6.30
6.48
10.85
1.27
6.30
50.40
11.06
7.49
10.89
16.38
25.20
5.04
15.30
7.56
40.62
6.97
Gearbox, early Armstrong Siddeley, front pre-selector up to early 1935/1 1/2"
OD
Gearbox, rear pre-selector ENV & Armstrong Siddeley, rubber cage.
Gearbox, rear pre-selector ENV & Armstrong Siddeley, steel cage.
Gearbox, late Armstrong Siddeley. Alum, repair ring & seal
Gearbox, late Armstrong Siddeley, front 2" OD
K17
K18a
K18b
K29
K19
5.79
8.40
18.38
15.75
7.89
6.95
10.08
22.05
18.90
9.47
6 cylinder water pump/distributor drive & gearbox front manual gearbox
Sprite all helical 1934/35 9hp
Pinion, Octo. 1935 on 9hp open propshaft axles only
Fan 12/4, 15/6 & 9hp & 12/4 camshaft
Front hub, 9hp (pre Merlin) all 12 & 14/6, 12/4 & 44T 15/6
1939 12hp front hub oil seal
Rear, hub, 12/4, 15/6 1935 9hp and Autovia
K10
K15
K3
K4
K34
K1
5.25
9.25
5.52
3.70
5.25
12.29
6.30
11.10
6.62
4.44
6.30
14.74
Rear hub, 9hp Merlin chassis types (66M, K, S67M, Z & C) 12/4 & 9hp Victor
models
1939 12hp rear hub seal
Outer hub, Big 4 & 16hp
Inner hub, Big 4 & 16hp
Autovia front hub seal
Sprite water pump seal
K2
K24
K5
K7
K21
K16
11.64
7.72
7.35
7.28
6.83
4.73
13.97
9.26
8.82
8.73
8.19
5.67
K6
K12
R139
3.70
14.92
1.06
4.44
17.90
1.27
R175
R207
R208
R38
R55
R41
R50
R153
R204
68.25
68.25
16.80
2.64
8.93
6.30
4.74
2.64
39.90
81.90
81.90
20.16
3.17
10.71
7.56
5.69
3.17
47.88
Front hub seal 9hp, 66 & 67 series 27L & F & 15/6 wide track & 16hp & Big
4
Early 9hp & 6 cyl pre 1935 rear hub seal
10 x 2BA countersunk screws for oil seal carriers
Transmission
A2423
A1148
A1138
A1316
A1150
A1294
A1299
A1268
A1313
A1111
A6188/9
Axle end piece -6 stud hub
Axle end piece KO hub
Nut for axle end piece
Muff coupling spring ring
Rear axle top filler cap
Pinion tail shaft tab washer
Stud rear hub securing KO hub cars only
Plug, rear axle drain (Not open prop Merlin 9hp)
KO hub spinners, chrome each
Blue Diamond Services Parts List
Last Updated 17/10/2014
16 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL & ROLLER
BEARINGS
AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONTR215
AXLE, STEERING
Torque
ball cover plate
7.88
9.45
Wheel nuts LH + RH, each
R140
8.40
10.08
Speedo drive gear
10BA126
R112
48.10
57.72
Differential bearing housing lock plate
R217
5.46
6.55
Muff coupling
A1272
R40
26.25
31.50
Bush axle case end piece
A1310
R203
15.75
18.90
Propshaft thrust spring
A1133
R110
4.74
5.69
Torque tube centre bearing felt seal
A1084
R219
5.20
6.24
Pin propellor shaft thrust
10BA98
R24
10.50
12.60
Wheel stud retaining nut 6 stud hubs
403
R161
2.10
2.52
Layrub coupling rubber (set of 3)
R86a
52.79
63.35
Universal joints. Customer's own reconditioned - subject to condition.
R30/6
162.75 195.30
1938 UJ's with blind bushes
R30/7
POA
Core plugs, rear hub 2" (prevent oil seepage on KO hubs)
R26
1.06
1.27
Shaft, pedal, silent 3rd upto MklV & including
R123
21.12
25.34
Shaft, pedal.silent 3rd after MklV & all Helical 1933
R124
21.12
25.34
Shaft, pedal, Girling brake 9hp & 12/4 & 15/6 state length
R125
19.69
23.63
Bush, pedal, oilite bronze for use when boring & bushing pedals to suit std.
shaft
6 Stud rear hub
Splined hub & half shaft, wide & narrow track KO. L OR R hand.
Rear hub on its own RH
Rear hub on its own LH
A1 308/9 etc Half shaft only L OR RH types (except Stelvio). Please specify.
R21
R220
R149
R149a
R154
3.70
194.25
269.85
149.10
149.10
79.80
4.44
233.10
323.82
178.92
178.92
95.76
525.00
525.00
630.00
630.00
525.00
525.00
535.50
630.00
630.00
642.60
Crown Wheel & Pinion Sets
Open prop 9hp
5:1,4.55:1
4.7:1
Torque tube axles
Short pinion 5:1, 4.77:1, 5.25
Long pinion 5:1, 4.77:1, 4.55:1
Long pinion .4.3:1, 4.1:1, 3.5:1,(these require 10 bolt post war diff)
We also from time to time have 2nd hand stock of serviceable CWP's
available in common ratios only: Price according to condition & avalibility
2nd Hand
Pre-selector Linkage
Ball pins, pre-selector linkage
Taper pin for C1108
R9
X57
3.28
0.57
3.93
0.68
C1108
Pre-selector bell crank swivel pin
R106
2.11
2.53
C1068
Bush for pre-selector bell crank chassis frame bracket & ENV gearbox
bracket
Pin, gearchange pedal rod 12/4 & 15/6 chassis nos. 27 & 47A, K, L, F
R13
R14
1.60
6.30
1.92
7.56
R16
R173
R15
R105
R20
R218
R46
1.85
8.93
0.53
5.79
6.30
19.43
34.13
2.22
10.71
0.63
6.95
7.56
23.31
40.95
Bushes, gearchange pedal rod pin
Gearchange pedal rod fork ends
Pins, 5/16" clevis l" long (see B4)
Spring blade, change speed lever (pre-selector)
C1044& C1218
Peg rivet change speed lever (Bakelite quadrant)
C1217
Pre-selector quadrant clamp piece (in bronze)
C1210a
Pre-selector quadrant cover in Aluminium to replace bakelite cover.
C1213
A4331
D6257
Blue Diamond Services Parts List
Last Updated 17/10/2014
17 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
& ROLLER BEARINGS AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
Gearbox
E900
9G415
9G378
4G48
A5398
AS390/30
9G89
4G81
Clutch and gearchange cable 9hp with Silken Torque mounts
Clutch and gearchange cable Pre-Selector 12/4+9hp with Silken Torque
mounts
A/S Preselector input shaft
Silent 3rd uprated 2nd gear (3 gears in all)
Rear gearbox universal joint retaining slotted nut 9hp, 12/4 & 6 cyl
Gearbox mounting rubber ring 1935 on
1934 Type gearbox mounting rubber ring
Special 12/4 gearbox to bell housing nut, extended nut
Spring gear selector manual box - set of 3
Spacer, universal joint Armstrong Siddeley
R199
34.80
41.76
R158
R87
R184
R165
R102
R190
E214
R134
R22
34.80
408.78
315.00
5.52
21.90
14.16
1.85
3.15
12.60
41.76
490.54
378.00
6.62
26.28
17.00
2.22
3.78
15.12
Rubber, all helical gearbox mounting before chassis no. 6022601 9hp (pre
'34) - set of 4
R4
17.20
20.64
All helical gearbox mounting rubbers 1/2" unconverted 9hp & all 6 cyl cars per set
Rubber, silent 3rd gearbox mounting 9hp - per pair
Stud, silent 3rd gearbox mount
Reverse trigger spring silent 3rd
R5
R6
R7
R195
16.38
16.12
10.35
0.74
19.66
19.34
12.42
0.89
R16
R168
R160
1.85
6.56
6.88
2.22
7.88
8.25
R197
R148
R196
R198
R202
3.16
3.58
2.63
12.60
25.73
3.79
4.30
3.15
15.12
30.87
R58
R83
R101
R2
R3
R216
25.73
16.80
49.48
7.88
4.73
41.94
30.87
20.16
59.38
9.45
5.67
50.33
R179
R8
R108
R142
R56
R172
R12
R104
2.11
17.33
P.O.A
27.30
9.45
7.89
8.22
9.45
2.53
20.79
CLUTCH
Bush oilite for Big 4 clutch link rods
Big 4 clutch linkage pin single
Big 4 clutch linkage pin double
Manual Clutch
A4331
9G384
9G390
9G345
9E538
Wire, bar pin locking 1934 manual gearbox
Fulcrum lever pin for above
Clutch fulcrum lever return spring
Clutch fulcrum bar holder 1934 all helical 9hp
Manual clutch springs 1934/5 9hp
Manual clutch spring, 9hp & 6cyl - set of 8
6E221
Clutch pedal return spring
10F77
Clutch linings & rivets. Man 9hp & 6 cyl
9E277
Pin, manual clutch withdrawal, fulcrum lever
9G129
Pin, manual clutch sliding collar (silent 3rd} - per pair
6G70
Clutch sliding plate pin ball race (not 1934)
9E257
3rd Type Auto Clutch
C1389
C1259
C1263
C1279
Outer govenor pins
Springs Auto Clutch 2nd & 3rd types - set of 6
Clutch linings & rivets, 3rd type clutch 9hp & 12/4
3rd type clutch centre, 12/4 & 15/6
Spring, outer 3rd type clutch 12/4 - set of 3
Spring, outer 3rd type clutch 9hp - set of 3
Pin, 3rd type auto clutch contact - set of 3
Bush, 3rd type clutch governor - set of 3
Blue Diamond Services Parts List
Last Updated 17/10/2014
32.76
11.34
9.47
9.86
11.34
18 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
& ROLLER
BEARINGS AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
2nd Type
Auto Clutch
2nd type clutch anti-rattle spring eyes - set of 3
2nd type auto clutch anti-rattle springs - set of 3
Clutch linings & rivets, 2nd type clutch 9hp, 12/4 (4 linings & rivets)
2nd type clutch centre, 12/4 & 15/6
Pin, 2nd type auto clutch driving 12/4 & 15/6 - set of 3
Pin, 2nd type auto clutch driving 9hp up to chassis no. 6025494 - set of 3
R66
R157
R127
R141
R11
R29
7.35
2.90
POA
27.56
58.15
33.60
8.82
3.48
C1152
C1153/ 258
A1157
C1164
C1178
Spring, 2nd type auto clutch outer - set of 3
Springs, auto clutch 2nd & 3rd types - set of 6
Bush, 2nd type clutch outer governor - set of 3
Pin, 2nd type clutch sliding - set of 3 (12/4)
Pin, 2nd type clutch sliding - set of 3 (9hp)
Outer governor pin
1st Type Auto Clutch
R118
R8
R103
R61
R210
R68
9.45
17.33
9.45
61.02
58.56
2.10
11.34
20.79
11.34
73.22
70.27
2.52
Springs set 1st type automatic clutch, 12 springs
C1105& C1010
Clutch linings & rivets, 1st type clutch 6 cyl (5 plate) or 9hp (4 plate)
R57/164
R155
26.25
P.O.A
31.50
C1220
C1162
C1151
C1177
33.08
69.78
40.32
NOTE: Newton Bennett clutch plates are of complicated construction & require detailed specialist attention to
reline them. Providing they are received in good and complete condition we can get 1st, 2nd & 3rd type clutch
plates relined.
Steering & Front Axle
3/4 KP brass thrust cover
Stud: front hub securing with nut
Stator tube, leather seal (2 sizes)
King pin 3/4"
A2414
Bush 3/4" king pin top
A2413
Bush 3/4" king pin bottom
A2411
Thrust 3/4" king pin
A2415
King pin 7/8"
A2110 / A2246
Bush 7/8" king pin top
A2111
Bush 7/8" king pin bottom
A2249
Thrust with hole 7/8" king pin
A2113
Thrust without hole 7/8" king pin
A2269
King pin 1"
A2205
Bush 1" king pin top
A2007
King pin 7/8" dust cap
A2177
Bush 1" king pin bottom
A2006
1" king pin bottom bush plug
7/8" king pin bottom bush plug
Thrust washer, 1" king pin with hole thick
A2005a
Thrust washer, 1" king pin with hole thin
A2005b
Cotter king pin
A2116
Rubber washer, steering ball pin
A2065
Rubber boot, drop arm ball pin joint
A5094
Steering ball, track rod and tiller arm
A2185
Steering ball, drop arm
A2170
Outerball socket, drop arm (slotted ball cup)
A2072
Ball cup, track rod drop arm & tiller arm
A2030
A2418
A2238
Blue Diamond Services Parts List
Last Updated 17/10/2014
N61
N59
N58
N18
N21
N22
N19
N2
N4
N5
N6
N7
N3
N37
N65
N38
N30
N17
N39
N57
N1
N10
N11
N12
N13
N14
N15
5.51
5.33
1.67
20.27
19.11
19.11
8.72
27.30
13.65
13.65
8.40
10.50
36.75
24.26
6.84
24.26
2.22
1.60
8.40
8.40
2.38
5.30
8.93
14.33
15.07
11.25
6.78
6.62
6.40
2.00
24.32
22.93
22.93
10.46
32.76
16.38
16.38
10.08
12.60
44.10
29.11
8.21
29.11
2.66
1.92
10.08
10.08
2.86
6.36
10.71
17.20
18.08
13.49
8.14
19 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
ASrod
FITTED
AXLE, STEERING
Bush,BEARINGS
steering track
end TO ENGINE, GEARBOX, REAR AXLE, FRONTN16
A2064 & ROLLER
11.29
Tiller rod spring
A2079
N27
8.77
Tiller rod end threaded plug
A2071
N53
6.63
Steering tiller rods 9hp
N62
115.50
Steering tiller rods 12/4
N63
115.50
Tie rod eye cap
A2254
N51
5.60
Tie rod eye cap spring
A2037
N28
5.90
Tie rod eye cap spring ring
A2063
N29
2.11
K.O front hub cap threaded plug
A2236
N40
21.00
Splined hub, K/0 front
A2230
N52
147.00
Steering wheel nut
10SF
N9
8.93
Shackles, Pins & Bushes
13.55
10.52
7.96
138.60
138.60
6.72
7.08
2.53
25.20
176.40
10.71
Spacer, rear axle, Lynx & Sprite etc. per pair
Spacer, rear axle 1/2" thick.
Rear of front spring flanged bush (plus ultra)
Rear spring bush, 2" long x 3/4" OD x 1/2" ID oilite bronze
3/4" long x 3/4" 0D x 1/2" ID oilite bronze
1" long x 3/4" OD x 1/2" ID oilite bronze
C25
C27
C1
C24
C2
C3
36.75
9.45
23.31
4.20
2.11
2.64
44.10
11.34
27.97
5.04
2.53
3.17
1" long x 3/4" OD x 1/2" ID oilite bronze flanged
1 3/4" long x 1" OD x 3/4" oilite bronze
1 1/4" long x 1" OD x 3/4" oilite bronze
1 3/4" long x 3/4" OD x 1/2" ID oilite bronze bush
Bush, rubber flanged shackle 1939-40 cars rear.
C4
C6
C5
C28
C7
3.16
5.25
5.25
4.20
1.31
3.79
6.30
6.30
5.04
1.58
Bush, replacement composite (steel with oilite bronze insert) for rear of rear
frame 1935 on except Merlin type chassis. Also front of rear chassis bush on
some 1934/5 9hp cars
C8
Replacement inner bushes for A5406 & A6648 composite bushes
C51
11.55
2.11
13.86
2.53
A5178
A5177
A6617
Silentbloc, bush rear spring 9hp plus series Alpine 6 cyl (1931/2) and Stelvio C21
Silentbloc bush rear of front spring 9hp & Alpine
C22
Silentbloc bush rear of front spring Stelvio chassis type
C52
8.40
15.59
14.18
10.08
18.71
17.01
A5553
A4425etc
A5544
A5545
A5601
10F49
A5294
Bush, silentbloc all Girling brake cars except two seater Sprite (front of front
spring)
Pin, shackle 3 1/4" underhead with slot head
Pin, shackle 4 1/2" underhead with flat
Pin, shackle 2 7/8" underhead with flat
Pin, shackle 2 7/8" underhead with slot
Pin, shackle 2 5/8" underhead with slot
Pin, shackle in front dumb iron (eared)
C9
C10
C11
C12
C13
C14
C35
10.50
16.38
15.49
14.88
15.42
14.18
25.20
12.60
19.66
18.59
17.85
18.51
17.01
30.24
Pin, shackle front of rear 9hp (open prop)
Nut, thin conventional shackle pin
Pin, shackle silentbloc front spring
Pin, shackle silentbloc rear spring
Silentbloc shackle pin nut
Silentbloc packing washers (C55 front - C56 rear)
Spacer, front of rear spring shackle 12/4
C31
C23
C36
C37
C53
C55/56
C39
16.38
1.81
13.13
13.13
1.81
2.10
3.70
19.66
2.17
15.75
15.75
2.17
2.52
4.44
A5250
A5255
A6648
A5035
D5759
A5406
A5665
500
A5171
A5170
A5172/3
A5537
Blue Diamond Services Parts List
Last Updated 17/10/2014
20 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
BEARINGS
AS 12/4,
FITTED
TOBig
ENGINE,
REAR AXLE, FRONTC15
AXLE, STEERING
Shackle,
front of rear
15/6,
4 & ODGEARBOX,
9hp
A5527 & ROLLER
15.24
18.29
10F4
A5230/1
A5275/6
D6089 etc
Shackle, rear of rear all 12/4, 15/6 Big 4 & OD 9hp all 9hp & front of rear pre
1931 9hp (not Brooklands, Sprite, Imp or MPH)
Shackle, front of rear 9hp 1932/5 & 12 & 14/6 1933/4
Shackle, front spring, 6 cyl 1933/4 only
Shackle, front spring rear, 9hp + Ultra 1932/35
C16
C17
C38
C20
15.24
15.24
22.93
23.31
18.29
18.29
27.52
27.97
A5168
A5169
A5549
Large rear spring shackle silent bloc
Small front spring rear shackle silent bloc
Front spring pin 12/4, Merlin 9hp, 15/6, Big 4 & Imp
C57
C58
C41
17.22
16.28
POA
20.66
19.53
A2403/4
A2139etc
8F58& 8F59
B.S.F. Nuts
Description
Front axle rear U bolt long. 22T, 26 & 46 series narrow track only & 44T 15/6 C43
Front axle U-bolt all other models
C42
Vintage 9hp rear of front shackle
C33/C34
(Nyloc nuts singularly. Steel plain nuts per 10)
Plain
Nett
IncVAT Nyloc
27.93
21.00
20.41
33.52
25.20
24.49
Nett
IncVAT
J7
J8
J9
J10
J11
0.30
0.32
0.56
0.88
0.63
0.37
0.38
0.67
1.06
0.76
O/No
Nett
Inc VAT
E316
E73
E292
E83
E293
E288
E298
E135
E80
E81
E82
E297
0.38
1.32
0.49
0.65
0.55
1.29
0.63
1.12
0.51
0.51
2.22
0.50
0.46
1.58
0.59
0.78
0.66
1.55
0.76
1.34
0.61
0.61
2.66
0.60
1/4" BSF deep nuts - per 10
1/4" BSF
5/16" BSF
3/8" BSF
7/16" BSF
1/2" BSF
Deep Brass Exhaust 5/16" BSF
Deep Brass Exhaust 3/8" BSF
1/4" BSF slotted
5/16" BSF slotted
J40
J1
J2
J3
J4
J5
E8
E606
J12
J13
3.94
2.10
2.63
3.62
3.94
4.20
0.85
1.31
2.55
2.78
4.73
2.52
3.15
4.35
4.73
5.04
1.02
1.58
3.06
3.34
3/8" BSF slotted
7/16" BSF slotted - each
1/2" BSF slotted - each
Misc. box 564 BSF nuts 1/4" - 1/2"
J14
J15
J16
J20
4.83
1.26
1.58
44.10
5.80
1.51
1.89
52.92
Taper pin 3/16" x 3"
Screws, 3/4" x 1/4" BSF round head
Round head screw 1 1/2" x 1/4" BSF
Screws, 1 1/4" x 1/4" BSF c/s head for wooden floor boards
Screws 1 1/2" x 1/4" BSF C/S
Box of imperial split pins
PART No. DESCRIPTION
Packing, Gaskets & Washers - Engine
X57
X10
X10a
X11
X11a
X195
0.56
0.23
0.53
0.48
0.53
9.90
0.67
0.28
0.63
0.58
0.63
11.88
R215
9E454
R98
R310
R77
9E716
9E178
9E172
9E131
R281
Oil pipe gasket to pump 12/4 & 15/6
Sump drain plug washer for 9hp,12/6,14/6,22T & 12/4 (square socket plug)
Sump strainer, 12/4 & 15/6
Sump strainer, 9hp 12 & 14/6
Oil filter, body 12/4 & 15/6
Oil filter cover, leather 12/4 & 15/6
Oil filler cover, 12/4 & 15/6
9hp Merlin pressure relief valve block gasket
Oil pressure release valve (cork) 9hp, 12/6 & 14/6
Oil pump body, 9hp, 12/6 & 14/6
Rubber ring oil pump, 9hp, 12/6 & 14/6
Oil pump drive cover, 12/4 & 15/6
Blue Diamond Services Parts List
Last Updated 17/10/2014
21 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL & ROLLER
AS FITTED
GEARBOX, REAR AXLE, FRONTE342
AXLE, STEERING
WaterBEARINGS
pipe to thermostat
22T, TO
26LENGINE,
&F
0.59
0.71
Water pump gland (cork)
6E231
E441
2.58
3.10
Water pump, drive cover, (cork) 12/4
R60
E294
0.53
0.63
Water pump, drive cover (paper) 12/4
R60a
E295
0.55
0.66
Top water pipe, 12/4
R266
E296
0.76
0.91
Top water pipe, 15/6
E481
0.74
0.89
Water pipe washer
9E212
E58
0.49
0.59
Top water pipe washer, 12/6 & 14/6 1933/34
1607/8
E401
0.49
0.59
Rear main gasket 12/4
R214
E362
2.18
2.62
12/4 breather gaskets - diamond shape
E346
0.63
0.76
9E170
9E175
9E191
R258
A6822
R259
6E196
9E516
6E260
9E182etc
R172
R259
9E298
M3459
9E177
R145
6E92
A6860
10F168
R146
R196
9E269
A6514
A6846
191
S474
9E350
9E350
R168
6E359
12/4 breather gaskets - square shape
9hp magneto gearbox to timing cover gasket
9hp magneto to gearbox gasket
Inlet manifold, 2 & 3 stud, 9hp
Inlet manifold, 12/4 - per pair
Big 4 inlet man. gasket - per pair
12/4 Water heated inlet manifold - per pair (22T type)
Inlet manifold non water heated 12/4 (twin SU) + cross flow Sprite
Inlet manifold, 15/6 & 1934 6 cyl - per pair
Inlet manifold rail gasket single & twin carb 6 cyl
Rocker box side stud, 15/6 each
Rocker box lid washer 14/6, 12/6 - per 4
Rocker box lid round -per 4
Rocker box joint gasket 12 & 14/6 - per pair
Rocker box joint washer 9hp - per pair
Rocker box, side stud, 12/4 - per pair
Rocker box, top stud, 12/4 - per pair
Rocker box lid 9hp square - per 4
Exhaust manifold, Big 4 - per pair
Exhaust manifold, 9hp
Exhaust manifold 12/4 - per pair
Exhaust manifold, 6 cyl - per pair
Exhaust manifold 1939 12hp
Downpipe 14/6 - square
Downpipe gasket, 9hp & most 12 & 14/6
Downpipe gasket,12/4 & 15/6
Hotspot elbow gasket 12/4
Hotspot bypass, 9hp
Hotspot bypass 6 cylinder
Exhaust bypass special series 6 cyl
12/4 small gasket set
9hp small gasket set
Cylinder head gasket, Big 4, new type
Cylinder head, 2 1/2 litre & 16hp, C/A
Cylinder head, 9hp Klingerite.
Cylinder head, 9hp C/A
Cylinder head, 12/4 compound gasket with five rings
New Cylinder head for 15/6
L type C/A Cylinder head gasket
Sprite cylinder head gasket (crossflow) New type
New gasket for T series 14/6
Cylinder head, 12/6, C/A
Cylinder head 1939/40 29S & D (1 1/2)
Blue Diamond Services Parts List
Last Updated 17/10/2014
E347
E132
E133
E84
E238
E624
E356
E357
E471
E486
E472
E446
E56
E442
E55
E242
E243
E57
E604
E22
E239
E417
E363
E475
E21
E240
E317
E20
E440
E444
E340
E111
E603
E605
E19
E85
E237
E483
E484
E241
E453
E415
E244
0.49
1.12
1.12
1.12
2.22
5.52
2.72
2.72
2.18
2.38
4.11
3.27
2.90
5.01
2.11
2.85
2.85
2.84
5.58
2.38
2.38
4.20
3.16
2.11
0.76
0.76
0.55
0.64
2.44
2.88
19.90
12.84
121.44
47.78
12.68
56.51
26.25
120.18
105.00
98.81
120.18
78.75
40.53
0.59
1.34
1.34
1.34
2.66
6.62
3.26
3.26
2.62
2.86
4.93
3.92
3.48
6.01
2.53
3.42
3.42
3.40
6.70
2.86
2.86
5.04
3.79
2.53
0.91
0.91
0.66
0.77
2.93
3.46
23.88
15.41
145.73
57.33
15.22
67.81
31.50
144.22
126.00
118.57
144.22
94.50
48.64
22 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL & ROLLER
AS FITTED
ENGINE, GEARBOX, REAR AXLE, FRONTE136
AXLE, STEERING
Solid BEARINGS
Copper 9hp head
gasket TO
1.5mm
57.75
69.30
Solid Copper 12/4 head gasket 1.5mm
E375
65.52
78.62
New head gaskets, w/pump 12/4.
E278
92.40
110.88
New head gaskets, non w/pump 12/4.
E376
89.08
106.90
Petrol sender unit gasket - see under Fuel System
0.00
Axles, Hubs & Gearboxes
Silent 3rd cover gasket
All helical gearbox cover gasket
Speedometer gearbox, cork washer
A1194
Torque ball cover plate, leather washer
A6094
Rear axle drain plug washer, all models (not open prop)
A1087
Rear axle cover
A1086
Rear axle bottom filler, cap washer, silent 3rd gearbox
10BA113
Rear axle, top filler, cap washer
A1300
Front & rear hub 6 stud wheel gasket
A2118
Front hub K/O. (Not Merlin or 3/4 KP 12/4)
A2234
Rear hub K/O. (Not Merlin)
A1311
Merlin front & rear & front 27 & 28 L & F & 12/4 Victor
A2421
Miscellaneous Parts & Accessories
R200
R211
R169
R170
R144
R121
R122
R126
R135
R136
R137
R167
1.10
1.12
0.76
2.11
0.65
2.11
1.27
1.27
0.91
0.91
0.89
0.91
1.32
1.34
0.91
2.53
0.78
2.53
1.52
1.52
1.09
1.09
1.07
1.09
Starting handle kit 9hp, 12/4
Starting handle end only
Ski lady repro kit (does not include ski's or rod for poles)
Alpine badge
Riley. Coventry repro. Diamond chassis number plate
Ball, throttle joint, less pin
Ball pins, throttle & advance/retard
Ali. throttle pedal
Luvax diaphram
Torque tube speedo cable
Key Fob, enameled blue Riley badge and leather back
X171
X152
X151
X42
E1
E2
X82
X169
P1
X17
36.75
15.23
36.75
15.75
11.55
6.30
4.25
21.00
7.72
75.60
2.64
44.10
18.27
44.10
18.90
13.86
7.56
5.10
25.20
9.26
90.72
3.17
Lynx Tourer screen staybars & clamps - per pair
Windscreen winder bracket on screen (Briggs body)
Side screen peg & lock
X175
X19
X85
136.50
9.56
13.18
163.80
11.47
15.81
Socket for side screen peg & lock
X46
5.03
6.04
Side screen hinge - 2 pieces
Side screen hinge spring
Bonnet corner leather, most cable brake cars - pair
X41
X113
X78
17.21
1.09
3.89
20.65
1.31
4.67
Bonnet corner leather, 15/6 & 12/4, Merlin series - pair
Bonnet catch lower section 1936 on (not plated)
X77
X170
3.89
11.55
4.67
13.86
Boot lid buckle (original pattern) each
1 1/4" black webbing, per foot for boot lid straps
Door striker plate & catch. IMP, MPH, Sprite per pair
Door lock spring, 12/4 & 15/6 & some 9hp saloons etc
Lynx inner door lever
Lynx inner door lever
1934 Boot lid lever catch
MPH/Sprite tail spine unmachined (short)
MPH/Sprite tail spine unmachined (Long)
Exterior door handle escutcheon (straight chrome) plated 1937/8 12/4
X99
X100
X193
X79
X40E
X40D
X188
X167
2.85
0.29
37.54
3.70
11.03
11.03
6.83
63.00
151.20
8.28
3.42
0.35
45.05
4.44
13.23
13.23
8.19
75.60
181.44
9.94
X168
8.28
9.94
A6343
D6556
Body Parts
D7017
D7365
Exterior door handle escutcheon (angled chrome) plated 1937/8 (not Briggs
body)
Blue Diamond Services Parts List
Last Updated 17/10/2014
23 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL & ROLLER
BEARINGS
AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONTX48
AXLE, STEERING
Door rubber
buffers
2.64
3.17
Spare wheel retaining plate / washer 1934/35 (Stainless)
X196
21.00
25.20
Spare wheel retaining plate / washer nut 1934/35 (Chrome)
X197
21.00
24.00
Aero screen box retaining clip (2 pieces)
X199
13.13
15.00
Briggs windscreen side spacer
X200
5.93
7.12
Captive floorboard nut - per 10
X49
4.20
5.04
Floorboard captive nut holders - each
X102
1.60
1.92
Pins door hinges 2 5/16" & 2 1/16" overall length (1/4" dia)
X96/X95 4.42
5.30
Seat catch release spring (conical)
X163
3.15
3.78
Sunshine roof locating peg (X103) & bracket (X106)
X103/6
10.50
12.60
Boot lock barrel & 2 keys
X104
9.60
11.52
Boot lock swivel arm 1936/7/8 12/4, 15/6 & Big 4 (extra long)
X134
5.88
7.06
Door lock barrel & 2 keys
X105
8.27
9.92
Door striker wedge, later saloons (not Briggs body)
X117
6.46
7.75
Snails ear type boot catch, hand lever only, LH & RH, 1937/8 type
X135/6
12.60
15.12
Chrome bumper bolts
X97
1.81
2.17
Door wedges - Lynx & Alpine & Tourers LH
X40F
8.82
10.58
Door wedges - Lynx & Alpine & Tourers RH
X40J
7.35
8.82
Locking plate - Lynx & Alpine & Tourers
X40G
3.70
4.44
Lock covers - Lynx & Alpine & Tourers
X40B&H 14.70
17.64
Door striker brackets - Lynx & Alpine & Tourers
X40A
12.97
15.56
Door striker bullets - Lynx & Alpine & Tourers
X40C
4.11
4.93
Radiators & Allied Parts
Radiator Relief valve Spring (X92A) & Ball (X92)
Tap, radiator drain brass 1/4" BSP
D6061
Tap, radiator drain brass 1/4" BSP with curver spout
D6061
Bonnet tape, radiator/scuttle 3/8" and 1/2" wide per foot
Rad. badge, german silver, vintage 9's, not enamelled
Radiator cap chrome type
D6595
Stud radiator mounting
A7377
A6278/ 571 Rubbers, radiator mounting - each
Rubbers washers, radiator tie bar end - set of 4
A7707
1939 12HP Top water hose
Hose, radiator 44mm - per inch
Hose, radiator 38mm - per inch
Hose, radiator 32mm - per inch
Hose, radiator 19mm - per inch
Hose, radiator 28mm - per inch (for bottom 6cyl)
Ring rubber, radiator cap
D6596
Special rad. hose for 6 Light Kestrel & Lynx 12/4 (not 22T)
D6480
Rad. mounting rubber (vintage type)
10F97
Steel backing washers, radiator mounting rubbers - set of 4
Rad cap rubber rings for bakelite caps
Temperature gauge pipe to radiator tie bar, clip
H7374
Blue Diamond Services Parts List
Last Updated 17/10/2014
X92(A)
X3
X3a
X14
X88
X89
X93
L2
L5
X130
E220
E461
E460
E222
X201
L13
L14
L19
L6
L35
X109
14.26
15.75
18.04
1.27
21.00
46.20
3.32
3.22
2.68
10.50
0.60
0.58
0.43
0.29
0.36
1.16
13.78
2.07
1.44
1.16
2.25
17.11
18.90
21.65
1.52
25.20
55.44
3.98
3.87
3.22
12.60
0.72
0.69
0.52
0.35
0.43
1.39
16.53
2.48
1.73
1.39
2.70
24 of 25
PART No.
DESCRIPTION
O/No
Nett
Inc VAT
BALL
& ROLLER
Various
Rubbers BEARINGS AS FITTED TO ENGINE, GEARBOX, REAR AXLE, FRONT AXLE, STEERING
Headlamp stem gaiter
Pedal rubber
Pedal rubber long all helical clutch pedal only
L12
R17
R18
9.45
5.09
5.09
11.34
6.11
6.11
Grommet, large for alum, sub-dash. All Girling brake cars 1 1/16" hole
Grommet, small for alum, sub-dash. All Girling brake cars 13/16" hole
Steering column draught excluder, 1935
Steering column draught excluder, 1936/8
Steering column draught excluder, 1933/4
Pedal stop pad sorbo
Pedal grommets 12/4, 15/6, Big 4 & 66 & 67 series 9hp
Scuttle seal, 1933/4/5 Riley 9 & 6 cyl - per foot
Boot lid rubber seal, 12/4 etc - 7'6"
Screen rubber saloons - 10 1/2 ft
Rear Window Seal, per ft
Screen to scuttle seal tourer - per foot
L15
L16
N54
N55
N56
L17
L20
L18
L29
L26
L27
L28
3.16
3.16
19.30
19.30
10.04
1.04
2.74
2.64
14.16
17.12
1.60
1.18
3.79
3.79
23.16
23.16
12.05
1.25
3.29
3.17
16.99
20.54
1.92
1.42
Screen seal Merlin & Briggs bodied Falcons & Touring saloon & Victor per
foot
Lamp rail bracket rubber washer
L34
L21
1.53
2.11
1.84
2.53
Scuttle seal 12/4, Big 4, 15/6, & 9hp Post 1935(not Merlin or Briggs bodied
cars) - per foot
Bonnet shut edging plastic grained U section - per foot
Scuttle seal, Merlin - per foot
Rubber belting 50mm x 3mm (price per metre)
L31
L32
L33
L37
2.64
0.38
3.71
2.11
3.17
0.46
4.45
2.53
12/4 non-water pump type 1/2" width (A section)
12/4 water pump type 1/2" width & 15/6 (A section)
9hp 1/2" width (A section)
12 & 14/6 1/2" width (B section)
Grease Nipples
G2
G1
G3
G4
7.97
7.97
7.97
9.02
9.56
9.56
9.56
10.82
1/4" BSFstraight
3/8" BSF angle 90°
5/16" BSF straight
5/16" BSF angle 50°
5/16" BSF angle 90°
3/8" 'BSF straight
Solder Type Nipples & Nuts
H1
H2
H3
H4
H8
H6
0.50
1.09
0.65
1.03
1.03
0.68
0.60
1.31
0.78
1.24
1.24
0.82
1/4 BSP solder type olive to fit above & take 1/4 pipe
X155
3.68
1/4 BSP solder type olive to fit above and take 5/16" pipe
X156
3.70
7/16" x 19 TPI nipple & nut for 3/16" pipe - can be bored out to take 1/4 pipe X179
2.38
1/4 BSP nipple & nut
0.00
Oil pressure gauge nut, nipple & washer
X70
3.82
Note: BSP thread size measurement:
1/8" BSP approx 9.5mm 3/8" BSP approx 16.5mm 1/4" BSP approx 13mm 1/2" BSP approx 21mm
4.41
4.44
2.86
0.00
4.58
D7896
10F245
A6937
A3302
A3324
A4037
Fan Belts
When ordering please state any existing belt no. & advise if new pulley fitted
Blue Diamond Services Parts List
Last Updated 17/10/2014
25 of 25