V el am mal E ngine eri ng Coll e ge
Department of Mechanical Engineering
Name & Photo :
Dr. D. DEVIKA
Designation:
Professor
Qualification :
M.E., Ph.D., M.B.A.,
Area of Specialization :
Teaching Experience :
Manufacturing Engineering
11+ years
No. of
10 / 10 / 2
Conference/FDP/workshop/Sem
inar
attended ::
Publication
International journal : 10
General :
Staff Achievements:
1. Overall FOURTH RANK in Anna University exams, M.E (CIM) in
2002-2004.
2. Received U.G.C. Research Fellowship in Sciences to Meritorious
Students under the U.G.C scheme
3. The project entitled “Study and Analysis of Rapid Prototypes for
Medical Applications” has been selected for consideration of
possible funding under the Women Scientist Scheme (WOSA) for
Research in Basic/Applied Sciences by Government of India,
Ministry of Science and Technology, DST, New Delhi for Rs 18
Lakhs.
4. Pursued best paper award for the paper entitled “Development of
Mathematical Model Using Design of Experiment and Finite
Element Analysis for Patient- Specific Implants by Rapid
Prototyping Technique” under the category of ‘Quality Engineering
&Management’ in the International conference on Advances in
Industrial Engineering Applications (ICAIEA 2010), organized by
Anna University Chennai, India.
5. Received DST fund under SERC scheme for the Research Project
entitled “Development of Porous Titanium based implants for
osteoporotic bone by rapid manufacturing and its chemical and
biomechanical evaluations” for Rs. 14.62 Lakhs.
6. Reviewer in Scopus indexed journals of
a. Int. J. of Bioinformatics Research and Applications (IJBRA),
Inder science publisher
b. Computers & Industrial Engineering (CAIE), Elsevier publisher
Invited Lectures :
1
Delivered a lecture titled “Rapid Prototyping for medical
applications” for the Polytechnic teaching staffs organized by
“Technical Teachers Training Institute (TTTI), Taramani, Chennai”
on Dec, 2007.
2
Delivered a lecture titled, “MIMICS in research” in national
workshop on Advanced medical application using MIMICS
software” organized by “Department of Biomedical Engineering,
SRM University in association with MTAB India Ltd and
Materialise, Belgium” on 8th & 9th April, 2010.
3
Delivered a lecture titled, “Impact of Higher education” in
Workshop scheduled on 4th Aug’ 2013 at Coimbatore organized by
T.H.E. GATE ACADEMY.
Experience Details:
S.
No
Position
1
Professor
2
Professor
3
Associate Professor
4
Assistant Professor
(Selection Grade)
5
UGC-Junior
Research Fellow
Institute / Industry
VEL TECH Technical
University,
Chennai
Dr. N.G.P. Institute of
Technology, Coimbatore.
School of Mechanical and
Building Sciences
(SMBS), VIT University,
Vellore campus
School of Mechanical and
Building Sciences
(SMBS), VIT University,
Vellore campus
CEG, Anna University,
Chennai
Department of
Manufacturing
Engineering, CEG, Anna
University, Chennai
Period
June 2014 –
June2015
June 2012 - April
2014
Sep 2011 - May
2012
1 yr 3 mths
July 2010 - Sep
2011
Aug 2008 - June
2010
Jan 2007 – June
2007
7
Senior Lecturer
(Electronics
(Robotics))
Murugappa Polytechnic
College, Avadi, Chennai
June 2005 - June
2006
8
Manager
Sri Muthu Mariamman
Leather Industries, Ranipet
May 1997 - May
2002
10
11
Instructor
Murugappa Polytechnic
(Mechanical Engg.) college, Chennai
1 yr 11 mths
06 mths
Guest faculty
9
1 yr 11 mths
9 mths
6
Ennore Thermal Power
Assistant Engineer Station,
(Mechanical)
Tamil Nadu electricity
Board, Chennai
Associate Lecturer Vellore Engineering
(Mechanical Engg.) College, Vellore
Total No. of
Years
1 yr
1yr 1 mth
5 yrs 1 mth
7 yrs 1 mth
Feb 1989 - Feb
1996
Aug 1988 - Jan
1989
Mar 1986 - Jan
1988
06 mths
1 yr 11 mths
Conferences/FDP/Workshop/Seminar: (List)
Conferences:
S.No
Date
Venue
Title
1
Vel Tech University, A Study on the Influence of Process Parameters on
6th – 7th Feb,
Chennai, India.
the Visco Elastic Properties of Abs Components
2015
Manufactured by FDM Process
2
Nov 17th 18th , 2011
VIT, Vellore, India
A review on bio compatible materials used in RP /
RM for medical applications
3
2011
DoME, Anna University
Chennai
Evaluation of dimensional accuracy of patientspecific implant fabricated by RP
Dec, 2010
NUS, Singapore.
Optimization of Patient-Specific Implant Fixation
Position Using FEA and Fabrication via RP
Techniques
5
2010
DoIE, Anna University
Chennai, India
Development of Mathematical Model Using Design
of Experiment and Finite Element Analysis for
Patient-Specific Implants by Rapid Prototyping
Technique
6
2009
NIT, Calicut, India
Modeling and Simulation of Tibia Leg Bone to lateral
Impact for Configurating the Patient-Specific Fracture
Fixation
7
May, 2009
Society of
Manufacturing
Engineers (SME) at
Chicago, USA
Finite Element Analysis and Rapid Prototyping to
enhance the patient specific implant fabrication
8
2009
DoME, Anna University
Chennai
Finite Element Analysis of Human Tibia bone for
custom implant
9
2004
VIT, Vellore, India
Modeling the process parameters to predict surface
qualities of RP/FDM using Artificial Neural
Networks
10
2004
NIT, Trichy
Optimizing Surface Roughness & Porosity of
RP/FDM using Taguchi Technique
4
FDP:
S.No
Date
Venue
Vel Tech
University
Title
Computational Fluid Dynamics
RAPID PROTOTYPING
Duration
1
15 and 17th
Dec, 2014.
23rd -27th of
Jan 2012
NIT, Warangal
2
12th -16th of
Dec 2011
4
5-6 of Nov,
2011
VIT University
in collaboration
with WIPRO
M/S, MTAB,
Chennai
WIPRO-MISSION10X
3
MIMICS Innovation Suite – Engineering
on Anatomy
2 days
VIT University
5
March, 2011
Geometrical Dimensioning and
Tolerancing (ASME Y 14.5 – 2009)
1 day
29th Dec,
2010
VIT University
6
20th Dec,
2010
VIT University
7
8
28th to 30th
July, 2010
Virtual Logic
Systems Pvt.
Ltd., Bangalore
Staff Training
College, Tamil
Nadu Electricity
Board, Madras
9
6.6.1989 to
31.7.1989
3 days
5 days
5 days
Value Engineering
1 day
Understanding Young Minds
1 day
3D Stereoscopy educational training
3 days
Orientation Training Programme
8 weeks
Workshop:
S.No
1
2
Date
Venue
Title
Feb, 2013
Dr. N.G.P. Institute of Engineering Tribology
Technology, Coimbatore
Aug, 2013
Dr. N.G.P. Institute of Robotics in association
Technology, Coimbatore
Technophilia, Bombay
Duration
2 days
with
2 days
Seminar:
S.No
Date
Venue
Title
Duration
Publications:
PUBLICATIONS – INTERNATIONAL JOURNAL
S.
No
Name of the Journal
ISSN/ISB
NPeriod
Period
The Institution of
Engineers (India):
Series C
22500545
(Under Review progress)
International Journal
of Applied
Engineering
Research
0973-4562 2015
Volume 10,
Number 6
1531315324
International journal
of Biomimetics,
Biomaterials and
Biomedical
Engineering
2296-9837 2015
Vol.22
63-75
4
Some clarifications on
the use of Mahalanobis
distance for the
machine-part cell
formation problem
International journal
of Advanced
Manufacturing
Technology (Impact
factor: 1.6).
(Annexure I – 3765)
0268-3768 2014
Vol.73
Nos.5-8
783-794
5
CARI – a heuristic
approach to machinepart cell formation using
correlation analysis and
relevance index
International journal
of production
Research (Impact
factor: 1.46)
(Annexure I – 4001)
0020-7543 2014
Vol.52
No.24
72977309
1
2
3
Title o the Paper
A Study on the Influence
of Process Parameters
on the Visco Elastic
Properties of Abs
Components
Manufactured by FDM
Process
Design, Analysis and
Optimization of PatientSpecific Implant
Fixation Position Using
FEA and Fabrication
Via RP Techniques
Characterization and
Corrosion Behaviour
Study on Biocompatible
Ti-6Al-4V Component
Fabricated by Electron
Beam Melting
Vol. no.
Page Nos
Finite element analysis
and validation of the
critical parameters
influencing the
mechanical behaviour of
tibia bone with patientspecific implant for
proximal end fracture.
Evaluation of
Mechanical behaviour of
Bone, Implant and
Bone-Implant Interface
by Numerical
Simulation of Two
Surgical Fixation
Procedures using Finite
Element Analysis
International journal
of Trends in
Biomaterials and
Artificial Organs
0971-1198 2012
International Journal
of Computers
application in
technology
(Annexure II - 8698)
9528091
8
A Novel Approach to
Machine-Part Cell
Formation Using
Mahalanobis Distance
European Journal of
Scientific Research
9
Study on influence of
Implant thickness and
fixation position on
implant stability using
Finite Element Analysis
Journal of
Biomimetics,
Biomaterials and
Tissue Engineering
(Annexure II –
Finite Element Analysis
and Rapid Prototyping
to enhance the patient
specific implant
fabrication
SME Technical
Paper.
6
7
10
Title o the Paper
10-15
2012
Vol.42
Nos.2-3
225-232
1450216X
2011
Vol.62 No.1
43-47
16621018
2011
Vol.9
47-55
2010
TP09PUB7
10410)
PUBLICATIONS – NATIONAL JOURNAL:
S.No.
Vol.26 no.1
Name of the
Journal
NIL
Period
ISSN/ISBN
No./
1.
BOOKS PUBLISHED:
Sl. No. Name of
NIL
Name of the Book
Publisher
Year of
Vol. no.
Page Nos.
Author
Publication