Scandvik
RETAIL PACKS
2015
SCANDVIK
RETAIL PACK
TRANSOM SHOWER CLAMSHELL
#12124P Black with 6’ black nylon hose
#12131P White with 6’ white nylon hose
#12106P NEW White handle, cup and cap with 6’ white hose
#12107P NEW White handle, cup & cap with 6’ white nylon hose
#12140P NEW White handle, cup & cap with 5’ stainless steel flex
hose with 1/2” NPS-F connection
#12113P Black handle, cup and cap with 6’ black hose
#12114P Black handle, cup & cap with 6’ black nylon hose
#10750P Recessed shower with 6’ white nylon hose
#10055P White with 6’ nylon hose
#10265P Black with 6’ nylon hose
SPRAYER CLAMSHELL
#10196P White sprayer with 6’ white nylon hose
#10195P White sprayer with 6’ chrome-flex hose
#10054P Black sprayer with 6’ black nylon hose
#10198P Black sprayer with 6’ chrome-flex hose
#14031P White sprayer with 6’ white nylon hose
#10191P White sprayer with 6’ white nylon hose
#10193P Black sprayer with 6’ black nylon hose
#10190P White sprayer with 5’ chrome-flex hose
#10192P Black sprayer with 5’ chrome-flex hose
WASHDOWNS CLAMSHELL
#10187P All 316 Stainless Steel
#10186P Chrome plated brass
#10175P Angled Washdown
COMBINATION PULL-OUT SHOWERS CLAMSHELL
#46011P White handle with 5’ white nylon hose
#46012P Black handle with 5’ black nylon hose
DRAINS CLAMSHELL
#10306P Sink drain with stopper
#10307P Cockpit or shower drain
#10308P Sink drain with basket and stopper
#10300P Sink drain with stopper, 1-1/4” Outlet
#10312P Sink drain with stopper, 1-1/2” Outlet
#10313P Sink drain with basket and stopper, 1-1/2” Outlet
LED LIGHTING
A3 LED LIGHTS BLISTER PACK
Other Trim Rings Available:
•
Round Brass
•
Square 316 Stainless Steel
Dimmable -- with any Pulse-Width Modulation Dimmer
•
Polycarbonate Lens •
Dual Color, Warm White with Blue Night Light
IP67
•
12 Volt
•
6 x Warm White LEDs
• Screw mount
•
6 x TOP blue LEDs
• Snap-over trim ring
Warm White LED
•
12 Volt - (White 2.2 Watt) (Blue 0.45 Watt)
•
6 x 0.5 Watt Warm White LEDs
•
3-Wire
•
143 Lumens
#41376P Flush Mount, 316 Stainless Steel Trim
•
12 Volt - 2.2 Watt
#41377P Flush Mount, White Trim
#41368P Flush Mount, 316 Stainless Steel Trim
#41378P Surface Mount, 316 Stainless Steel Trim
#41379P Flush Mount, White Trim
#41394P Flush Mount, Black Trim
#41317P Surface Mount, White Trim
#41373P Surface Mount, 316 Stainless Steel Trim
Dual Color, Warm White with Red Night Light
#41393P Flush Mount, Black Trim
•
6 x Warm White LEDs
•
6 x TOP blue LEDs
Cool white LED
•
12 Volt - (White 2.2 Watt) (Blue 0.45 Watt)
•
6 x 0.5 Watt Cool White LEDs
•
3-Wire
•
170 Lumens
#41386P Flush Mount, 316 Stainless Steel
•
12 Volt - 2.2 Watt
#41385P Flush Mount, White Trim
#41420P Flush Mount, 316 Stainless Steel Trim
#41387P Surface Mount, 316 Stainless Steel
#41421P Flush Mount, White Trim
#41395P Flush Mount, Black Trim
A4 LED LIGHT BLISTER PACK
#41369P 4” LED Ceiling Light
•
Dimmable - with any Pulse-Width
Modulation Dimmer
Flush Mount
Polycarbonate lens
316 Stainless Steel trim ring
16 x .5 Watt Warm White LEDs
225 Lumens
12/24 Volt - 7.5 Watt
IP67
•
•
•
•
•
•
•
A6 LED LIGHT BLISTER PACK
#41370P 6” LED Ceiling Light
•
•
•
•
•
•
•
•
#41344P LED White/Blue
#41345P LED White/Red
•
•
•
•
•
Dimmable - with any PulseWidth Modulation Dimmer
Flush Mount
Polycarbonate lens
316 Stainless Steel trim ring
26 x .5 Watt Warm White LEDs
350 Lumens
12/24 Volt - 9.3 Watt
IP67
EURO-DOME LED LIGHTS CLAMSHELL
High Impact Lens and Shroud
1 x 3 Watt White LED, 3,000K
10 Blue or Red TOP LEDs
White LED Lumen: 75
Surface Mount
•
•
•
•
•
Voltage: 12/24 Volt
3-Stage Dimming Touch Switches
Wiring for External Switch included
IP65
5” Diameter x 1-1/8” High
TRADITIONAL DOME LED LIGHTS BLISTER PACK
#41324P LED 5-1/2” Dia. x 1-1/2” High
#41325P LED 6-3/4” Dia. x 1-3/4” High
•
•
•
•
New LED version
Stainless Steel
Prismatic plastic lens
Side mounted on/off switch.
Illuminated by 20 warm white LEDs.
12 Volt, 1.7 Watt (compares with a
10 Watt Halogen bulb)
COCKPIT LED LIGHTS CLAMSHELL
#41371P LED Cockpit Light
• Surface Mount
• Polycarbonate housing and lens
• 5 x 0.5 W Warm White LEDs
• 128 Lumens
• 12 Volt - 2 Watt
• IP-67
#41372P LED Cockpit Light
• Flush Mount
• Polycarbonate housing and lens
• 5 x 0.5 W Warm White LEDs
• 128 Lumens
• 12 Volt - 2 Watt
• IP-67
LED BUNK LIGHT CLAMSHELL
#41364 LED cabin light with switch
• Dimmable when connected to an external dimming module
• 12/24 Volt - 8 Watt
• 8 Watts
• 32 x 0.5 Watt Samsung 5630 LEDs
• Warm White (3,000K)
• 535 Lumen
• Polycarbonate housing and diamond cut lens
• Surface Mount
• IP-40 (for interior use)
• Dimensions: 13” L x 2-3/4” W x 7/8” H
LED ENGINE ROOM LIGHT CLAMSHELL
IGNITION PROTECTION
CERTIFIED
Meets Requirements and
Standards for
SAE J1711
USCG, ABYC & NMMA
#41388 E-360 12 Volt
Watts: 13.2
LED Quantity: 36 (4 rows of 9 LEDs)
Lumen: 1,154
#41389 E-500 12/24 Volt
Watts: 18
LED Quantity: 50 (5 rows of 10 LEDs)
Lumen: 1,520
Protection: IP-68
LED Type: SMD5630 Cool White (5,500K-6,300K)
Beam Angle: 180°
Surface Mount (hardware included)
Wire can exit from bottom or end of fixture
Dimensions: 13” L x 2-3/4” W x 1” H
LED SPREADER LIGHT CLAMSHELL
#41342P White Bracket Mount
#41343P White Flush Mount
#41355P Black Bracket Mount (NEW COLOR)
#41356P Black Flush Mount (NEW COLOR)
•
•
•
•
•
•
•
•
•
•
•
Working Voltage: 12/24 Volt
Aluminum alloy housing with powder coat finish
Cool white LED color (5,500 - 6,300K)
Temperature of LED: less than 158° with 77° ambient
temperature
Four 3 watt Samsung 3535 LEDs
Equivalent to 40-50 Watt Halogen bulbs
LED Lifetime: 50,000 Hours
LED Beam angle: 110°
0.8 Amp draw at 12 Volt
IP-65
Dimensions without bracket mount: 5-7/8”L x 2-3/8” x 1-1/4”D
R-5 COURTESY LIGHT CLAMSHELL
#41381P Daylight White, Side Illumination, 15 Lumen
#41382P Blue, Side Illumination, 3.5 Lumen
#41383P Daylight White, Down Illumination, 15 Lumen
#41384P Blue, Down Illumination, 3.5 Lumen
IP-67
5 x TOP LEDs
12 Volt - 0.4 Watt
0.03 Amp
Surface Mounted
2-5/8” W x 13/16” H x 1/2” D
O-5 LED COURTESY LIGHT CLAMSHELL
#41360P White LED with white ABS trim
#41339P Blue LED with white ABS trim
#41361P White LED with 316 stainless steel trim
#41362P Blue LED with 316 stainless steel trim
•
•
•
•
•
•
•
12 Volt
LED surface mount courtesy light
5 x 0.4 watt white LEDs (4,500K) or 5 TOP blue LEDs
LED beam angle is 120°
White is 15 lumens and blue is 2.8 lumens
IP-65
Dimensions 2-7/8” L x 1-1/2” W x 7/16” D
LED SCAN-STRIPS SKINPACK
IGNITION PROTECTION
CERTIFIED
Meets Requirements and
Standards for
SAE J1711
USCG, ABYC & NMMA
4” ScanStrip 5 LEDs
#41354P White
#41357P Blue
8” ScanStrip 17 LEDs
#41346P White (5,500K)
#41347P Blue
#41348P Red
#41349P Green
16” ScanStrip 34 LEDs
#41350P White (5,500K)
#41351P Blue
#41352P Red
#41353P Green
36” ScanStrip 85 LEDs
#41358P White
#41359P Blue
U-12 LED UNDERWATER LIGHT BLISTER PACK
#41430 White
#41431 Blue
#41432 Green
• 12 Volt SMD2835 (white) Super Bright LEDs or 5mm High Flux
(blue & green LEDs
• 400+ Lumen (White)
• IP68
• WHITE: 2.3 Watt, 0.2 Amp
• COLORS: 0.8 Watt, 0.07 Amp
• 20° Beam Angle provides intense illumination
• Mount with wire through transom or wire outside transom with
included mounting block
• 5’ Cable / SS Screws Included
• 3-3/8” L x 1-5/8” W x 3/4” H
RGB CLAMSHELL
#41531P RGB, 5-meters (16’) long, 60 LED per meter, 12V, dimmable
#41532 RGB-Kit, 5-meters (16’) long, 60 LED per meter, 12V, #41606
controller included
#41533P RGB, 7-meters (23’) long, 60 LED per meter, 12V, dimmable
#41534 RGB-Kit, 7-meters (23’) long, 60 LED per meter, 12V, #41606
controller included
#41535 RGB-Boat Kit, (2) 5-meters (16’) long, 60 LED per meter, 12V,
#41606 controller, (2) Y-cables, (2) 20’ extension cables included
#41536 RGB-Boat Kit, (2) 7-meters (23’) long, 60 LED per meter, 12V,
#41606 controller, (2) Y-cables, (2) 20’ extension cables included
DUAL COLOR FLEX-STRIP CLAMSHELL
#41524P Blue-White
#41525P Red-White
•
•
•
•
•
•
•
•
12 Volt
Wired on both ends
IP-68
SMD 5050 LED
60 LEDs / meter
Blue/Red or Cool White or both together
5m Long (16’) x 14mm wide
Fits 14mm Flex-Trak
DUAL COLOR SHORT LENGTH KIT FLEX-STRIP CLAMSHELL
#41514P 21” Length Blue-White (2 end caps, 3 clips)
#41515P 21” Length Red-White (2 end caps, 3 clips)
#41516P 48” Length Blue-White (2 end caps, 5 clips)
#41517P 48” Length Red-White (2 end caps, 5 clips)
• 12 Volt
• Wired on both ends
• IP68
• SMD 5050 LED
• 60 LED/meter
• Blue/Red or Cool White or both together
• 14mm wide
• Fits 14mm Flex-Trak
SINGLE COLOR FLEX-STRIP CLAMSHELL
10mm Wide Flex-Strips
#41500P Warm White, 5-meters (16’) long, 30 LED per meter, 12V, dimmable
#41501P Cool White, 5-meters (16’) long, 30 LED per meter, 12V, dimmable
#41502P Warm White, 5-meters (16’) long, 60 LED per meter, 12V, dimmable
#41503P Cool White, 5-meters (16’) long, 60 LED per meter, 12V, dimmable
12mm Wite Flex-Strips
#41510P Warm White, 5-meters (16’) long, 60 LED per meter, 12V, dimmable
#41511P Cool White, 5-meters (16’) long, 60 LED per meter, 12V, dimmable
#41520P Red, 5-meters (16’) long, 30 LED per meter, 12V, dimmable
#41521P Green, 5-meters (16’) long, 30 LED per meter, 12V, dimmable
#41522P Blue, 5-meters (16’) long, 30 LED per meter, 12V, dimmable
#41523P Blue, 5-meters (16’) long, 60 LED per meter, 12V, dimmable
LED Replacement Bulbs
•
•
•
•
•
•
Replacement LED in clamshell with information and sell sheet
12/24 Volt (works with 12 Volt and 24 Volt UNLESS noted in the chart)
Replacements for popular G4, Bayonet, Wedge and Festoon base types
Available colors: Warm White, Cool White, BLUE, RED, White/BLUE and White/RED
More than 60% more efficient than incandescent bulbs (very low amp draw)
Low temperature, cool to the touch
You Have
You Need
You Have
MR16 LED
41008P Warm White
41009P Cool White
20 W Halogen
Lumen: 290 WW
Beam Angle: 120°
Voltage: 12/24 Volt
Amps: 0.42 @12 Volt
Wattage: 5 Watt
Dimmable: yes
2”
G4 Wafer Back-Pin
Lumen: 120 WW, 140 CW
Amps: 0.12 @ 12 Volt
Watts: 1.5
Beam Angle: 120°
Dimmable: Yes
41000P 9 SMD2835 Warm White LED
10 W Halogen 41001P 9 SMD2835 Cool White LED
G4 Wafer Back-Pin
Lumen: 170 WW, 190 CW
Amps: 0.17 @ 12 Volt
Watts: 2.0
Beam Angle: 120°
Dimmable: Yes
41010P 12 SMD2835 Warm White
20 W Halogen
41011P 12 SMD2835 Cool White
G4 Wafer Side-Pin
Lumen: 120 WW, 140 CW
Amps: 0.12 @ 12 Volt
Watts: 1.5 White, 1.0 Color
41020P 9 SMD2835 Warm White
41021P 9 SMD2835 Cool White
41022P 6 SMD5050 Blue
10 W Halogen 41023P 6 SMD5050 Red
G4 Wafer Side-Pin
Lumen: 170 WW, 190 CW
Amps: 0.17 @ 12 Volt
Watts: 2.0
41030P 12 SMD2835 WW
41031P 12 SMD2835 CW
41032P 10 SMD5050 Blue
20 W Halogen 41033P 10 SMD5050 Red
G4 Wafer Side-Pin
Lumen: 270 WW, 310 CW
Amps: 0.25 @ 12 Volt
Watts: 3.0
Beam Angle: 120°
Dimmable: Yes
41040P 21 SMD2835 Warm White
20 W Halogen 41041P 21 SMD2835 Cool White
20 W Halogen
2 1/2”
20 W Halogen
20 W Halogen
G4 Halogen Look-Alike
Lumen: 290
Amps: 0.12 @ 12 Volt
Watts: 1.5
Beam Angle: 340°
Dimmable: No
41072P 4 Warm White
1-3/16”
7/8”
G4 Wafer Side-Pin DUAL Color
Lumen: 150 WW, 180 CW
Amps: 0.14 @ 12 Volt (White)
Watts: 1.7 White, 0.5 Color
41050P 12/3 SMD5050 WW/Blue
41051P 12/3 SMD5050 WW/Red
41052P 12/3 SMD5050 CW/Blue
41053P 12/3 SMD5050 CW/Red
G4 Compact-Tower
Lumen: 200 WW, 260 CW
Amps: 0.21 @ 12 Volt
Watts: 2.5
Beam Angle: 270°
Dimmable: Yes
41070P SMD2835 Warm White
41071P SMD2835 Cool White
7/8”
7/8”
53 or 57
1-3/16”
Mini-Bayonet, Mini-Tower
Parallel Pins - Single Contact
Base: BA9s
Lumen: 75
Volts: 12 Volt only
Amps: 0.06
Watts: 0.8
41075P 5 SMD5050 Warm White
1142 or 1176
Bayonet Tower
Parallel Pins - Dual Contacts
Base: BA15d
Lumen: 220 WW, 260 CW
Amps: 0.21 @ 12 Volt
Watts: 2.5
41080P 18 SMD2835 Warm White
41081P 18 SMD2835 Cool White
1157
Bayonet Tower
Offset Pins - Dual Contacts
Base: BAY15d
Lumen: 216 WW, 270 CW
Amps: 0.21 @ 12 Volt
Watts: 2.5
41082P 18 SMD2835 Warm White
41083P 18 SMD2835 Cool White
1-3/16”
1-3/8”
You Need
1-3/4”
7/8”
1-1/4”
2-1/8”
3/8”
7/8”
7/16”
1/2”
1”
7/8”
1-3/8”
2-1/8”
7/8”
1-3/8”
2-1/8”
LED Replacement Bulbs
You Have
1141 or 1156
68 or 90
Bayonet Compact-Tower
Parallel Pins - Single Contact
Base: BA15s
Lumen: 220 WW, 260 CW
Volts: 10-30 VDC and 12 VAC
Amps: 0.21 @ 12 Volt
Watts: 2.5
41084P 18 SMD2835 Warm White
41085P 18 SMD2835 Cool White
Bayonet Base Wafer
Parallel Pins - Dual Contacts
Base: BA15d
Lumen: 55 WW, 65 CW
Amps: 0.06 @ 12 Volt
Watts: 0.7
41086P 4 SMD2835 Warm White
41087P 4 SMD2835 Cool White
Bayonet Base Wafer
Offset Pins - Dual Contacts
Base: BAY15d
Lumen: 55 WW, 65 CW
Amps: 0.06 @ 12 Volt
Watts: 0.7
41088P 4 SMD2835 Warm White
41089P 4 SMD2835 Cool White
68 or 90
906, 912, 921
70, 168, 194
Bayonet Base Mini-Tower
Base: BA15d
Lumen: 170
Amps: 0.16 @ 12 Volt
Watts: 1.9
Beam Angle: 270°
41090P 8 SMD2835 Warm White
Wedge Base Compact-Tower
Base: T10 Wedge
Lumen: 220
Amps: 0.21 @ 12 Volt
Watts: 2.5
Beam Angle: 270°
Dimmable: Yes
41092P Warm White
41097P 1 Warm White
You Have
1-3/8”
2-1/8”
71, 78202
1”
5/8”
1-3/8”
78203, 70, 211
5/8”
1-3/8”
211-2, 212-2,
561, 562, 70-0
5/8”
1-3/8”
1/2”
5/8”
41100P 4 SMD2835 Warm White
41101P 4 SMD2835 Cool White
Festoon Wafer 37/42mm
Base: 37mm and 42mm Festoon
Lumen: 75 WW, 90 CW
Amps: 0.10 @ 12 Volt
Watts: 1.2
41102P 37mm 6 Warm White
41103P 37mm 6 Cool White
41104P 42mm 6 Warm White
41105P 42mm 6 Cool White
7/8”
5/8”
37mm
1”
5/8”
42mm
Festoon Wafer
Base: 42mm Festoon
Lumen: 140 WW, 160 CW
Amps: 0.17 @ 12 Volt
Watts: 2.0
1”
5/8”
You Need
Festoon Wafer
Base: 31mm Festoon
Lumen: 45 WW, 65 CW
Amps: 0.06 @ 12 Volt
Watts: 0.7
7/8”
1”
1”
41106P 9 SMD2835 Warm White
41107P 9 SMD2835 Cool White
360° Nav. Festoon
Base: 42mm Festoon
Lumen: 175 WW, 210 CW
Amps: 0.21 @ 12 Volt
Watts: 2.5
1”
7/8”
41110P 30 SMD3528 Warm White
41111P 30 SMD3528 Cool White
7/8”
1-3/8”
2”
7/8”
BA15d to G4
Swivels up to 120°
41120P
3/8”
1-1/8”
5/8”
BA15s to G4
Swivels up to 120°
41121P
1-1/8”
5/8”
1/2”
3/8”
1”
G4 Base Adapters
1/2”
1-1/8”
360° Nav. Barrel
Base: 43mm Barrel
Lumen: 175 WW, 210 CW
Amps: 0.21 @ 12 Volt
Watts: 2.5
41112P 30 SMD3528 Warm White
41113P 30 SMD3528 Cool White
3/8”
3/8”
Wedge Base Mini-Tower
Base: T10 Wedge
Lumen: 75
1-1/8”
Volts: 12 Volt only
Amps: 0.06
Watts: 0.8
41095P 5 SMD5050 Warm White
7/16”
Wedge Base Optic-Lens
Base: T10 Wedge
Lumen: 90
Amps: 0.12 @ 12 Volt
Watts: 1.5
168, 194, 906
You Need
E27 to G4
Standard Household
Edison Socket
41122P
1-5/8”
1-1/8”
5/8”
41346P
41121P
41120P
41106P
41097P
41070P
41072P
41033P
41032P
41040P
41030P
41010P
41020P
SKU
8” Scan-Strip BLUE
8” Scan-Strip WHITE
Adapter: BA15s to G4
Adapter: BA15d to G4
42mm Festoon 9 LEDs WARM WHITE
T10 Wedge 1.5 Watt LED with Optic Lens
WARM WHITE
G4 Bottom-Pin Compact Tower 18 LEDs
WARM WHITE
G4 Pin 3 Watt LED WARM WHITE
(Halogen Look Alike bulb)
G4 Side-Pin Wafer 10 LEDs RED
G4 Side-Pin Wafer 10 LEDs BLUE
G4 Side-Pin Wafer 21 LEDs WARM WHITE
G4 Side-Pin Wafer 12 LEDs WARM WHITE
G4 Back-Pin Wafer 12 LEDs WARM WHITE
G4 Side-Pin Wafer 9 LEDs WARM WHITE
Description
2
2
2
2
2
2
2
4
2
2
2
2
2
2
2
2
4
4
2
2
2
Large Display
#41141
Quantity
5
5
4
4
4
2
3
5
10
5
5
5
5
5
5
5
5
10
10
4
4
5
FULL Display
#41142
Quantity
41106P
41346P
41351P
41350P
41008P
41122P
41121P
41120P
41092P
41095P
41097P
41070P
41072P
41052P
41033P
41032P
41040P
41030P
41010P
41000P
41020P
SKU
42mm Festoon 9 LEDs WARM WHITE
8” Scan-Strip WHITE
16” Scan-Strip BLUE
16” Scan-Strip WHITE
MR16 5 Watt LEDs WARM WHITE
Adapter: E27 to G4
Adapter: BA15s to G4
Adapter: BA15d to G4
T10 Wedge Compact Tower 18 LEDs WARM WHITE
T10 Wedge Tower 5 LEDs WARM WHITE
T10 Wedge 1.5 Watt LED with Optic Lens WARM WHITE
G4 Bottom-Pin Compact Tower 18 LEDs WARM WHITE
G4 Pin 3 Watt LED WARM WHITE
(Halogen Look Alike bulb)
G4 Side-Pin Wafer 12 LEDs COOL WHITE & 3 LEDs BLUE
G4 Side-Pin Wafer 10 LEDs RED
G4 Side-Pin Wafer 10 LEDs BLUE
G4 Side-Pin Wafer 21 LEDs WARM WHITE
G4 Side-Pin Wafer 12 LEDs WARM WHITE
G4 Back-Pin Wafer 12 LEDs WARM WHITE
G4 Back-Pin Wafer 9 LEDs WARM WHITE
G4 Side-Pin Wafer 9 LEDs WARM WHITE
LED Replacement Light Bulbs Point of Purchase (POP) Displays
41347P
21” DUAL Color Flexible LED Light Strip
COOL WHITE/BLUE
2
2
2
2
2
2
3
3
3
5
4
41084P
41082P
41080P
41090P
41347P
41075P
BA15s Tower 18 LEDs WARM WHITE
BAY15d Tower 18 LEDs WARM WHITE
BA15d Tower 18 LEDs WARM WHITE
BA15d Tower 8 LEDs WARM WHITE
8” Scan-Strip BLUE
BA9s Tower 5 LEDs WARM WHITE
Description
41514P
21” DUAL Color Flexible LED Light Strip
COOL WHITE/RED
Small Display #41140
Includes Quantity 1 (one) of each SKU
41515P
Please Visit
www.scandvik.com
search for SKU for further details
and product information
TEAK WONDER®
Dressing & Sealer
New teak is subject to rapid aging if not cleaned daily with fresh water or a suitable
protective product applied. Most protective treatments for teak on the market are oil-based
stains that have several drawbacks; they falsely darken the teak, absorb dust and dirt;
in warm conditions the oil is brought to the surface and can make the deck slippery and
greasy and it can also stain clothes.
TEAK WONDER® DRESSING & SEALER is a safe and durable, non-oil based product which provides a pleasant golden
color without darkening the teak or producing that fake colored look. The special components in TEAK WONDER®
DRESSING & SEALER seal the wood, blocking the penetration of dust and dirt whilst protecting the natural teak oils
against ultraviolet rays, slowing the oxidation and discoloration process. The sealing treatment helps inhibit the penetration
into the wood of liquids such as fuel, oil, fish blood, paints, etc. As long as these liquids are not allowed to dry, they will
be much easier to remove.
TEAK WONDER® DRESSING & SEALER does not make the teak glossy or slippery, does not falsely darken the teak
and does not build up an accumulation on the surface. The product is quick drying and does not smell. It is recommended
that two coats are applied (with heavy brush strokes) on new teak. If teak is old or dirty, then the wood should be
previously treated with TEAK WONDER® CLEANER and TEAK WONDER® BRIGHTENER, allowing the wood to dry
completely before the sealing process. Another coat of sealer can be applied after 8-12 weeks without repeating the
cleaning process. The product must be mixed thoroughly before use. Immediately wipe away any drips or marks on nonteak surfaces. The coverage is approximately 55-65 ft² / lt.
#60100: 1/2 lt. can (Case Quantity: 12)
#60101: 1 lt. can (Case Quantity: 8)
#60105: 4 lt. can (Case Quantity: 4)
TEAK WONDER®
Cleaner & Brightener
+ Combo Pack
Combo Pack contains 1 bottle of TEAK WONDER® CLEANER and
1 bottle of TEAK WONDER® BRIGHTENER
TEAK WONDER® Combo Pack is a complete kit for cleaning small areas.
The kit contains one bottle of cleaner and one bottle of brightener to perform
the complete cleaning cycle. The one liter bottles are equipped with a handy
cap/pourer that allows easy use of the products, avoiding waste.
For the application process, see the instructions for TEAK WONDER® CLEANER and TEAK WONDER® BRIGHTENER.
The coverage is approximately 85-100 ft² / lt. (depending on the condition of the wood)
#60110: Combo Pack of 1 lt. bottles (Case Quantity: 8 Combo Packs)
#60115: Combo Pack of 4 lt. bottles (Case Quantity: 2 Combo Packs)
#60120: Cleaner 4 lt. bottle (Case Quantity: 4)
#60125: Brightner 4 lt. bottle (Case Quantity: 4)
ABA Stainless Steel Hose Clamp Boxes
ABA Stainless Steel Hose Clamp Cruiser Pack
#31606 Cruiser Pack Plastic Case with 56
Assorted ABA 316 Original Stainless Steel
Clamps. #60002 Flexible nut driver included
Clamping Range
Boxed #
Boxes of 10
SAE Size
Inches
mm
13614
3
5/16 - 9/16
8 - 14
13617
4
7/16 - 11/16
11 - 17
13620
6
1/2 - 13/16
13 - 20
13624
8
5/8 - 1
15 - 24
13628
10
3/4 - 1 1/8
19 - 28
13632
12
7/8 - 1 1/4
22 - 32
13638
16
1 1/16 - 1 1/2
26 - 38
13644
20
1 1/4 - 1 3/4
32 - 44
13650
24
1 1/2 - 2
38 - 50
13657
28
1 1/4 - 2 1/4
32 - 57
13664
32
1 1/2 - 2 1/2
38 - 64
13670
36
1 3/4 - 2 3/4
44 - 70
13676
40
2-3
51 - 76
13683
44
2 1/4 - 3 1/4
57 - 83
13689
48
2 1/2 - 3 1/2
64 - 89
13694
52
2 3/4 - 3 3/4
70 - 95
13696
56
3-4
76 - 102
13697
60
3 1/4 - 4 1/4
83 - 108
13698
64
3 1/2 - 4 1/2
89 - 114
13699
72
3 1/2 - 5
89 - 127
n/a
80
4 - 5 1/2
102 - 140
n/a
88
4 1/2 - 6
114 - 152
n/a
96
5 - 6 1/2
127 - 165
n/a
104
5 1/2 - 7
140 - 178
n/a
112
6 - 7 1/2
152 - 191
n/a
120
6 1/2 - 8
165 - 203
n/a
128
7 - 8 1/2
178 - 216
n/a
138
7 5/8 - 9 1/8
194 - 232
n/a
154
8 5/8 - 10 1/8
219 - 257
n/a
170
9 5/8 - 11 1/8
244 - 283
n/a
186
10 5/8 - 12 1/8
270 - 308
ABA Stainless Steel Hose Clamp Display
#31604 Counter Top Display Rack with 240 assorted
ABA 316 Stainless Steel Original and 304 Stainless
Steel Mini clamps
#24401 Display Rack only, no charge to ABA
customers
scandvik.com