Connector Catalog
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
SMA Connectors
Johnson Components SMA connectors meet or exceed all applicable requirements of the MIL-C-39012
coaxial connector specification. SMA connectors have threaded coupling and certain precision versions
can be used up to 26.5 GHz. SMA connectors are used in applications where higher frequencies,
miniaturization and size reduction are key considerations. Microwave uses for the SMA include amplifiers,
attenuators, filters, mixers, oscillators, switches, and cable assemblies.
View SMA Catalog Pages on-line by connector type.
Please note these files contain line drawings and photographs
and will take a minute or two to load.
Bulkhead Mount
SMA Semi Rigid Cabled Connectors
SMA Flexible Cabled Connectors
PC Mount
SMA In-Series Adapters and Loads
End Launch
Panel Mount
SMA Reverse Polarity
Spark Plugs
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
SMA Reverse Thread
Field Replaceable
y D.B.A e
http://www.woken.com.tw/
SMA Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
bulkhead Mount
142-0701-401 4
142-0701-406 4
142-0701-411 4
142-0701-416 4
142-0701-531 4
142-0701-536 4
Bulkhead Mount 4
Front Mount Bulkhead Jack Receptacle 4
Rear Mount Bulkhead Jack Receptacle 4
Right Angle Bulkhead Mount Jack Receptacle 4
Specifications 2, 3
1
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range:
Dummy loads .......................................................................... 0-2 GHz
Flexible cable connectors ................................................... 0-12.4 GHz
Uncabled receptacles, RA semi-rigid and adapters ........... 0-18.0 GHz
Straight semi-rigid cable connectors and
field replaceable connectors ............................................... 0-26.5 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors Cabled Connectors
RG-178 cable .............................. 1.20 + .025f
1.20 + .03f
RG-316, LMR-100 cable .............. 1.15 + .02f
1.15 + .03f
RG-58, LMR-195 cable ................ 1.15 + .01f
1.15 + .02f
RG-142 cable ............................... 1.15 + .01f
1.15 + .02f
LMR-200, LMR-240 cable ............ 1.10 + .03f
1.10 + .06f
.086 semi-rigid ............................ 1.07 + .008f
1.18 + .015f
.141 semi-rigid (w/contact) .......... 1.05 + .008f
1.15 + .015f
.141 semi-rigid (w/o contact) ...... 1.035 + .005f
Jack-bulkhead jack adapter and plug-plug adapter ................. 1.05 + .01f
Jack-jack adapter and plug-jack adapter ............................... 1.05 + .005f
Uncabled receptacles, dummy loads .................................................. N/A
Field replaceable (see page 59) ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level 70K Feet
RG-178 ...................................................................... 170
45
RG-316; LMR-100, 195, 200 ..................................... 250
65
RG-58, RG-142, LMR-240, .086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact ... 335
85
.141 semi-rigid with contact and adapters ................. 500
125
Dummy loads ................................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ................................................................... 500
Connectors for RG-316; LMR-100, 195, 200 .................................. 750
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
field replaceable, uncabled receptacles ...................................... 1000
Connectors for .141 semi-rigid with contact and adapters ............ 1500
Connectors for .141 semi-rigid w/o contact, dummy loads .............. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ................................................................... 125
Connectors for RG-316; LMR-100, 195, 200 .................................. 190
Connectors for RG-58, RG-142, LMR-240, 086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact .......................... 250
Connectors for .141 semi-rigid with contact and adapters .............. 375
Dummy loads ...................................................................................... N/A
Insertion Loss: (dB maximum)
Straight flexible cable connectors
and adapters ...................... 0.06
f (GHz), tested at 6 GHz
Right angle flexible cable
connectors ......................... 0.15
f (GHz), tested at 6 GHz
Straight semi-rigid cable
connectors with contact ..... 0.03
f (GHz), tested at 10 GHz
Right angle semi-rigid cable
connectors ......................... 0.05
f (GHz), tested at 10 GHz
Straight semi-rigid cable
connectors w/o contact ...... 0.03
f (GHz), tested at 16 GHz
Straight low loss flexible
cable connectors ................ 0.06
f (GHz), tested at 1 GHz
Right Angle low loss flexible
cable connectors ................ 0.15
f (GHz), tested at 1 GHz
Uncabled receptacles, field replaceable, dummy loads ..................... N/A
Insulation Resistance: 5000 megohms minimum
Contact Resistance: (milliohms maximum) Initial After Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ........................... 3.0*
4.0*
Center contact (right angle cabled
connectors and adapters) .............................. 4.0
6.0
Field replaceable connectors ........................ 6.0
8.0
Outer contact (all connectors) ........................... 2.0
N/A
Braid to body (gold plated connectors) ............. 0.5
N/A
Braid to body (nickel plated connectors) ........... 5.0
N/A
*N/A where the cable center conductor is used as a contact
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors, adapters and .141 semi-rigid
connectors w/o contact ............................................................. -60 dB
Field replaceable w/o EMI gasket .............................................. -70 dB
.086 semi-rigid connectors and .141 semi-rigid connectors
with contact, and field replaceable with EMI Gasket ................ -90 dB
Two-way adapters ...................................................................... -90 dB
Uncabled receptacles, dummy loads .............................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 ................................................................... 335
Connectors for RG-316; LMR-100, 195, 200 .................................. 500
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
.141 semi-rigid cable w/o contact, uncabled receptacles .............. 670
Connectors for .141 semi-rigid with contact and adapters ............ 1000
Power Rating (Dummy Load): 0.5 watt @ + 25oC, derated to 0.25 watt @
+125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds minimum
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60 pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*(lbs) Torque (in-oz)
Connectors for RG-178 ............................ 10
N/A
Connectors for RG-316, LMR-100 ........... 20
N/A
Connectors for LMR-195, 200 .................. 30
N/A
Connectors for RG-58, LMR-240 ............. 40
N/A
Connectors for RG-142 ............................ 45
N/A
Connectors for .086 semi-rigid ................. 30
16
Connectors for .141 semi-rigid ................. 60
55
*Or cable breaking strength whichever is less.
Durability: 500 cycles minimum
100 cycles minimum for .141 semi-rigid connectors w/o contact
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
†Avoid user injury due to misapplication. See safety advisory definitions on page 2.
2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or Tefzel per ASTM D 3159
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Seal Rings: Silicone rubber per ZZ-R-765
EMI Gaskets: Conductive silicone rubber per MIL-G-83528, Type M
* All gold plated parts include a .00005" min. nickel underplate barrier layer.
Mating Engagement for SMA Series per MIL-C-39012
JACK
PLUG
PLUG
JACK
NOTES
1. ID OF CONTACT TO MEET VSWR, CONTACT RESISTANCE AND INSERTION WITHDRAWAL FORCES
WHEN MATED WITH DIA .0355-.0370 MALE PIN.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMA - 50 Ohm Connectors
Bulkhead Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Front Mount Bulkhead Jack Receptacle
VSWR & FREQ. RANGE
GOLD PLATED
NICKEL PLATED
VSWR: N/A 0-18 GHz
142-0701-411
142-0701-416
Rear Mount Bulkhead Jack Receptacle
VSWR & FREQ. RANGE
GOLD PLATED
NICKEL PLATED
VSWR: N/A 0-18 GHz
142-0701-401
142-0701-406
Right Angle Bulkhead Mount Jack Receptacle
VSWR & FREQ. RANGE
VSWR: N/A
4
0-18 GHz
GOLD PLATED
NICKEL PLATED
142-0701-531
142-0701-536
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Alphabetical Index
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
142-0701-201 4
142-0701-206 4
142-0701-231 4
142-0701-235* 4
142-0701-236 4
142-0701-301 5
142-0701-306 5
142-0701-335* 6
142-0701-421 5
142-0701-426 5
142-0701-491 5
142-0701-496 5
142-0701-501 6
142-0701-506 6
142-0701-551 6
142-0701-556 6
142-0711-201 5
142-0711-205 5
142-0711-301 6
142-0711-305 6
142-0801-201 4
142-0801-206 4
142-0801-301 4
142-0801-306 4
Right Angle Bulkhead Jack Receptacle 6
Right Angle Jack Receptacle 5
Right Angle Jack Receptacle - Moisture Seal* 6
Right Angle Jack Receptacle - Surface Mount 6
Right Angle Plug Receptacle 4
Specifications 2, 3
Straight Bulkhead Jack Receptacle 5
Straight Jack Receptacle 4
Straight Jack Receptacle - Surface Mount 5
Straight Plug Receptacle 4
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range:
Dummy loads .......................................................................... 0-2 GHz
Flexible cable connectors ................................................... 0-12.4 GHz
Uncabled receptacles, RA semi-rigid and adapters ........... 0-18.0 GHz
Straight semi-rigid cable connectors and
field replaceable connectors ............................................... 0-26.5 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors Cabled Connectors
RG-178 cable .............................. 1.20 + .025f
1.20 + .03f
RG-316, LMR-100 cable .............. 1.15 + .02f
1.15 + .03f
RG-58, LMR-195 cable ................ 1.15 + .01f
1.15 + .02f
RG-142 cable ............................... 1.15 + .01f
1.15 + .02f
LMR-200, LMR-240 cable ............ 1.10 + .03f
1.10 + .06f
.086 semi-rigid ............................ 1.07 + .008f
1.18 + .015f
.141 semi-rigid (w/contact) .......... 1.05 + .008f
1.15 + .015f
.141 semi-rigid (w/o contact) ...... 1.035 + .005f
Jack-bulkhead jack adapter and plug-plug adapter ................. 1.05 + .01f
Jack-jack adapter and plug-jack adapter ............................... 1.05 + .005f
Uncabled receptacles, dummy loads .................................................. N/A
Field replaceable (see page 59) ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level 70K Feet
RG-178 ...................................................................... 170
45
RG-316; LMR-100, 195, 200 ..................................... 250
65
RG-58, RG-142, LMR-240, .086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact ... 335
85
.141 semi-rigid with contact and adapters ................. 500
125
Dummy loads ................................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ................................................................... 500
Connectors for RG-316; LMR-100, 195, 200 .................................. 750
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
field replaceable, uncabled receptacles ...................................... 1000
Connectors for .141 semi-rigid with contact and adapters ............ 1500
Connectors for .141 semi-rigid w/o contact, dummy loads .............. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ................................................................... 125
Connectors for RG-316; LMR-100, 195, 200 .................................. 190
Connectors for RG-58, RG-142, LMR-240, 086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact .......................... 250
Connectors for .141 semi-rigid with contact and adapters .............. 375
Dummy loads ...................................................................................... N/A
Insertion Loss: (dB maximum)
Straight flexible cable connectors
and adapters ...................... 0.06
f (GHz), tested at 6 GHz
Right angle flexible cable
connectors ......................... 0.15
f (GHz), tested at 6 GHz
Straight semi-rigid cable
connectors with contact ..... 0.03
f (GHz), tested at 10 GHz
Right angle semi-rigid cable
connectors ......................... 0.05
f (GHz), tested at 10 GHz
Straight semi-rigid cable
connectors w/o contact ...... 0.03
f (GHz), tested at 16 GHz
Straight low loss flexible
cable connectors ................ 0.06
f (GHz), tested at 1 GHz
Right Angle low loss flexible
cable connectors ................ 0.15
f (GHz), tested at 1 GHz
Uncabled receptacles, field replaceable, dummy loads ..................... N/A
Insulation Resistance: 5000 megohms minimum
Contact Resistance: (milliohms maximum) Initial After Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ........................... 3.0*
4.0*
Center contact (right angle cabled
connectors and adapters) .............................. 4.0
6.0
Field replaceable connectors ........................ 6.0
8.0
Outer contact (all connectors) ........................... 2.0
N/A
Braid to body (gold plated connectors) ............. 0.5
N/A
Braid to body (nickel plated connectors) ........... 5.0
N/A
*N/A where the cable center conductor is used as a contact
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors, adapters and .141 semi-rigid
connectors w/o contact ............................................................. -60 dB
Field replaceable w/o EMI gasket .............................................. -70 dB
.086 semi-rigid connectors and .141 semi-rigid connectors
with contact, and field replaceable with EMI Gasket ................ -90 dB
Two-way adapters ...................................................................... -90 dB
Uncabled receptacles, dummy loads .............................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 ................................................................... 335
Connectors for RG-316; LMR-100, 195, 200 .................................. 500
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
.141 semi-rigid cable w/o contact, uncabled receptacles .............. 670
Connectors for .141 semi-rigid with contact and adapters ............ 1000
Power Rating (Dummy Load): 0.5 watt @ + 25oC, derated to 0.25 watt @
+125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds minimum
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60 pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*(lbs) Torque (in-oz)
Connectors for RG-178 ............................ 10
N/A
Connectors for RG-316, LMR-100 ........... 20
N/A
Connectors for LMR-195, 200 .................. 30
N/A
Connectors for RG-58, LMR-240 ............. 40
N/A
Connectors for RG-142 ............................ 45
N/A
Connectors for .086 semi-rigid ................. 30
16
Connectors for .141 semi-rigid ................. 60
55
*Or cable breaking strength whichever is less.
Durability: 500 cycles minimum
100 cycles minimum for .141 semi-rigid connectors w/o contact
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
†Avoid user injury due to misapplication. See safety advisory definitions on page 2.
2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or Tefzel per ASTM D 3159
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Seal Rings: Silicone rubber per ZZ-R-765
EMI Gaskets: Conductive silicone rubber per MIL-G-83528, Type M
* All gold plated parts include a .00005" min. nickel underplate barrier layer.
Mating Engagement for SMA Series per MIL-C-39012
JACK
PLUG
PLUG
JACK
NOTES
1. ID OF CONTACT TO MEET VSWR, CONTACT RESISTANCE AND INSERTION WITHDRAWAL FORCES
WHEN MATED WITH DIA .0355-.0370 MALE PIN.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMA - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Plug Receptacle
VSWR &
FREQ. RANGE
GOLD
PLATED
NICKEL
PLATED
VSWR: N/A
0-18 GHz
142-0801-201
142-0801-206
Right Angle Plug Receptacle
VSWR &
FREQ. RANGE
GOLD
PLATED
NICKEL
PLATED
VSWR: N/A
0-18 GHz
142-0801-301
142-0801-306
Mounting hole layout figure 2 page 174.
Straight Jack Receptacle
VSWR &
FREQ. RANGE
GOLD
PLATED
NICKEL
PLATED
VSWR: N/A
0-18 GHz
142-0701-201
142-0701-206
142-0701-231
142-0701-236
IR
COMPATIBLE
"A"
.155 (3.94)
142-0701-235*
.110 (2.79)
* Tin/Lead solder dipped legs for IR Reflow Compatibility.
4
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Bulkhead Jack Receptacle
VSWR &
FREQ. RANGE
VSWR: N/A 0-18 GHz
VSWR: N/A 0-18 GHz
GOLD
PLATED
142-0701-421
142-0701-491
NICKEL
PLATED
142-0701-426
142-0701-496
“A”
.700 (17.78)
.065 (1.65)
“B”
.450 (11.43)
.755 (19.18)
Straight Jack Receptacle - Surface Mount
VSWR &
FREQ. RANGE
GOLD
PLATED
NICKEL
PLATED
VSWR: N/A
0-18 GHz
142-0711-201
142-0711-205
Connector Mounting Pads 60%/40% Tin/Lead Coated (Solder Plated)
Right Angle Jack Receptacle
VSWR &
FREQ. RANGE
GOLD
PLATED
NICKEL
PLATED
VSWR: N/A
0-18 GHz
142-0701-301
142-0701-306
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMA - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Jack Receptacle - Surface Mount
VSWR &
FREQ. RANGE
GOLD
PLATED
VSWR: N/A
0-18 GHz
142-0711-301
NICKEL
PLATED
142-0711-305
Connector Mounting Rails 60%/40% Tin/Lead
Coated (Solder Plated)
Right Angle Jack Receptacle - Moisture Seal*
VSWR &
FREQ. RANGE
NICKEL BODY, GOLD INTERFACE
IR COMPATIBLE*
VSWR: N/A
0-18 GHz
142-0701-335*
* Tin/Lead solder dipped legs and Moisture Sealed for IR Reflow Compatibility.
Right Angle Bulkhead Jack Receptacle
6
VSWR &
FREQ. RANGE
GOLD
PLATED
NICKEL
PLATED
“A”
VSWR: N/A
0-18 GHz
142-0701-501
142-0701-506
.155 (3.94)
142-0701-551
142-0701-556
.110 (2.79)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
End Launch Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
142-0701-801
142-0701-806
142-0701-831
142-0701-836
142-0701-841
142-0701-846
142-0701-851
142-0701-856
142-0701-871
142-0701-876
142-0701-881
142-0701-886
142-0711-811
142-0711-816
142-0711-821
142-0711-826
142-0711-841
142-0711-846
6
6
6
6
6
6
6
6
7
7
6
6
7
7
5
5
5
5
142-0711-871
142-0711-876
142-0711-881
142-0711-886
142-0721-841
142-0721-846
142-0721-871
142-0721-876
142-0721-881
142-0721-882
142-0801-801
142-0801-806
142-0801-811
142-0801-816
142-0801-821
142-0801-826
142-0801-831
142-0801-836
6
6
6
6
7
7
7
7
7
7
5
5
5
5
5
5
5
5
Bulkhead Jack Receptacle - Round Contact 7
End Launch Connectors general information 4
End Launch Jack Receptacle - Round Contact 5, 6
End Launch Jack Receptacle - Surface Mount 7
End Launch Jack Receptacle - Tab Contact 6
End Launch Plug Receptacle - Round Contact 5
End Launch Plug Receptacle - Tab Contact 5
Material Specifications 3
Specifications 2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range:
Dummy loads .......................................................................... 0-2 GHz
Flexible cable connectors ................................................... 0-12.4 GHz
Uncabled receptacles, RA semi-rigid and adapters ........... 0-18.0 GHz
Straight semi-rigid cable connectors and
field replaceable connectors ............................................... 0-26.5 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors Cabled Connectors
RG-178 cable .............................. 1.20 + .025f
1.20 + .03f
RG-316, LMR-100 cable .............. 1.15 + .02f
1.15 + .03f
RG-58, LMR-195 cable ................ 1.15 + .01f
1.15 + .02f
RG-142 cable ............................... 1.15 + .01f
1.15 + .02f
LMR-200, LMR-240 cable ............ 1.10 + .03f
1.10 + .06f
.086 semi-rigid ............................ 1.07 + .008f
1.18 + .015f
.141 semi-rigid (w/contact) .......... 1.05 + .008f
1.15 + .015f
.141 semi-rigid (w/o contact) ...... 1.035 + .005f
Jack-bulkhead jack adapter and plug-plug adapter ................. 1.05 + .01f
Jack-jack adapter and plug-jack adapter ............................... 1.05 + .005f
Uncabled receptacles, dummy loads .................................................. N/A
Field replaceable (see page 59) ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level 70K Feet
RG-178 ...................................................................... 170
45
RG-316; LMR-100, 195, 200 ..................................... 250
65
RG-58, RG-142, LMR-240, .086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact ... 335
85
.141 semi-rigid with contact and adapters ................. 500
125
Dummy loads ................................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ................................................................... 500
Connectors for RG-316; LMR-100, 195, 200 .................................. 750
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
field replaceable, uncabled receptacles ...................................... 1000
Connectors for .141 semi-rigid with contact and adapters ............ 1500
Connectors for .141 semi-rigid w/o contact, dummy loads .............. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ................................................................... 125
Connectors for RG-316; LMR-100, 195, 200 .................................. 190
Connectors for RG-58, RG-142, LMR-240, 086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact .......................... 250
Connectors for .141 semi-rigid with contact and adapters .............. 375
Dummy loads ...................................................................................... N/A
Insertion Loss: (dB maximum)
Straight flexible cable connectors
and adapters ...................... 0.06
f (GHz), tested at 6 GHz
Right angle flexible cable
connectors ......................... 0.15
f (GHz), tested at 6 GHz
Straight semi-rigid cable
connectors with contact ..... 0.03
f (GHz), tested at 10 GHz
Right angle semi-rigid cable
connectors ......................... 0.05
f (GHz), tested at 10 GHz
Straight semi-rigid cable
connectors w/o contact ...... 0.03
f (GHz), tested at 16 GHz
Straight low loss flexible
cable connectors ................ 0.06
f (GHz), tested at 1 GHz
Right Angle low loss flexible
cable connectors ................ 0.15
f (GHz), tested at 1 GHz
Uncabled receptacles, field replaceable, dummy loads ..................... N/A
Insulation Resistance: 5000 megohms minimum
Contact Resistance: (milliohms maximum) Initial After Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ........................... 3.0*
4.0*
Center contact (right angle cabled
connectors and adapters) .............................. 4.0
6.0
Field replaceable connectors ........................ 6.0
8.0
Outer contact (all connectors) ........................... 2.0
N/A
Braid to body (gold plated connectors) ............. 0.5
N/A
Braid to body (nickel plated connectors) ........... 5.0
N/A
*N/A where the cable center conductor is used as a contact
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors, adapters and .141 semi-rigid
connectors w/o contact ............................................................. -60 dB
Field replaceable w/o EMI gasket .............................................. -70 dB
.086 semi-rigid connectors and .141 semi-rigid connectors
with contact, and field replaceable with EMI Gasket ................ -90 dB
Two-way adapters ...................................................................... -90 dB
Uncabled receptacles, dummy loads .............................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 ................................................................... 335
Connectors for RG-316; LMR-100, 195, 200 .................................. 500
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
.141 semi-rigid cable w/o contact, uncabled receptacles .............. 670
Connectors for .141 semi-rigid with contact and adapters ............ 1000
Power Rating (Dummy Load): 0.5 watt @ + 25oC, derated to 0.25 watt @
+125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds minimum
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60 pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*(lbs) Torque (in-oz)
Connectors for RG-178 ............................ 10
N/A
Connectors for RG-316, LMR-100 ........... 20
N/A
Connectors for LMR-195, 200 .................. 30
N/A
Connectors for RG-58, LMR-240 ............. 40
N/A
Connectors for RG-142 ............................ 45
N/A
Connectors for .086 semi-rigid ................. 30
16
Connectors for .141 semi-rigid ................. 60
55
*Or cable breaking strength whichever is less.
Durability: 500 cycles minimum
100 cycles minimum for .141 semi-rigid connectors w/o contact
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
†Avoid user injury due to misapplication. See safety advisory definitions on page 2.
2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or Tefzel per ASTM D 3159
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Seal Rings: Silicone rubber per ZZ-R-765
EMI Gaskets: Conductive silicone rubber per MIL-G-83528, Type M
* All gold plated parts include a .00005" min. nickel underplate barrier layer.
Mating Engagement for SMA Series per MIL-C-39012
JACK
PLUG
PLUG
JACK
NOTES
1. ID OF CONTACT TO MEET VSWR, CONTACT RESISTANCE AND INSERTION WITHDRAWAL FORCES
WHEN MATED WITH DIA .0355-.0370 MALE PIN.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMA - 50 Ohm Connectors
End Launch Connectors - A Johnson Components® Original
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
The End Launch connector is attached to the circuit board by inserting
the board edge between the legs and soldering the legs and center conductor to pads on the board. For optimum high frequency performance,
the connector to circuit board transition must be adjusted for low VSWR.
To compensate for the transition from coax to microstrip, trace widths “A”
and “B” must be adjusted based on circuit board thickness. When properly adjusted, this technique yields a low VSWR over a wide bandwidth.
The tabulated dimensions “A”, “B”, “C”, “D”, and “E” were determined
experimentally to achieve low VSWR (typically less than 1.5 up to 18
GHz). The circuit board used for these tests was double-sided FR 4 with
1 oz. copper on both sides. The copper was left on the bottom of the
board to create a ground plane for the 50 Ohm microstrip structure. While
not all inclusive, these dimensions are given as reference information for
selected SMA End Launch connectors. Further adjustments may be
necessary depending upon the application. All dimensions are in inches.
Tabulated Dimensions “A”, “B”, “C” and “D” are symmetrical about the center line
NEW
Surface Mount Versions Available!
(See page 49)
Part
Number
142-0701-801/806
142-0701-851/861
142-0701-871/876
142-0711-821/826
142-0711-871/876
142-0711-881/886
142-0701-881/886
SMA End Launch Specifications
ELECTRICAL RATINGS
Impedance: 50 Ohms
Frequency Range: 0-18 GHz
VSWR: Dependent upon application
Working Voltage (VRMS max.): 335 @ Sea Level, 85 @ 70K Feet
Dielectric Withstanding Voltage (VRMS min. at sea level): 1000
Corona Level (Volts min. at 70,000 feet): 250
Insulation Resistance: 5000 megohms min
Contact Resistance (milliohms max.): 3.0 Initial, 4.0 after environmental
RF High Potential Withstanding Voltage (VRMS min. tested at 4 and 7
MHz): 670
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds max.
Mating Torque: 7 to 10 inch-pounds
Coupling Proof Torque: 15 inch-pounds min.
Coupling Nut Retention: 60 pounds min.
Contact Retention Force: 6 lbs min. axial force, 4 inch-ounce min. torque
Durability: 500 cycles min.
4
Base
Width
.375
.375
.375
.250
.375
.375
.375
Board
Thick
.062
.062
.062
.062
.047
.047
.031
“A”
.103
.103
.103
.103
.083
.083
.050
“B”
.090
.090
.090
.070
.075
.075
.045
“C”
.250
.250
.250
.170
.250
.250
.250
“D”
.440
.440
.440
.380
.440
.440
.440
“E”
.200
.200
.200
.165
.200
.200
.200
ENVIRONMENTAL RATINGS:
(Meets or exceeds the applicable paragraph of MIL-C-39012)
Temperature Range: -65o to + 165o C
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-303, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001” min.
or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003”
min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204
.00003” min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per
MIL-G-45204 .00001” min. or nickel plated per QQ-N-290
*All gold plated parts include a
.00005” min. nickel underplate barrier layer.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
End Launch Plug Receptacle - Round Contact
VSWR & FREQ. RANGE
VSWR: N/A
0-18 GHz
BOARD THICKNESS GOLD PLATED
NICKEL PLATED
"A"
"B"
.062 (1.57)
142-0801-801
142-0801-806
.068 (1.73)
.073 (1.85)
.042 (1.07)
142-0801-821
142-0801-826
.048 (1.22)
.093 (2.36)
End Launch Plug Receptacle - Tab Contact
VSWR & FREQ. RANGE
VSWR: N/A
0-18 GHz
NICKEL PLATED
"A"
"B"
.062 (1.57)
142-0801-811
142-0801-816
.068 (1.73)
.083 (2.11)
.042 (1.07)
142-0801-831
142-0801-836
.048 (1.22)
.103 (2.62)
BOARD THICKNESS GOLD PLATED
End Launch Jack Receptacle - Round Contact
VSWR & FREQ. RANGE
VSWR: N/A
0-18 GHz
BOARD THICKNESS GOLD PLATED
NICKEL PLATED
"A"
"B"
.062 (1.57)
142-0711-821
142-0711-826
.068 (1.73)
.042 (1.07)
.042 (1.07)
142-0711-841
142-0711-846
.048 (1.22)
.062 (1.57)
Coupling proof torque 8
inch-pounds maximum
without support wrench.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMA - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
End Launch Jack Receptacle - Round Contact
Figure 1
Figure 2
VSWR &
FREQ. RANGE
VSWR: N/A
0-18 GHz
BOARD
THICKNESS
GOLD
PLATED
NICKEL
PLATED
"A"
"B"
FIGURE
.062 (1.57)
142-0701-801
142-0701-806
.068 (1.73)
.073 (1.85)
1
.042 (1.07)
142-0701-831
142-0701-836
.048 (1.22)
.093 (2.36)
1
.031 (0.79)
142-0701-881
142-0701-886
.037 (0.94)
.104 (2.64)
2
.047 (1.19)
142-0711-871
142-0711-876
.053 (1.35)
.088 (2.24)
1
End Launch Jack Receptacle - Tab Contact
VSWR &
FREQ. RANGE
VSWR: N/A
0-18 GHz
6
BOARD
THICKNESS
GOLD
PLATED
NICKEL
PLATED
"A"
.062 (1.57)
142-0701-851
142-0701-856
.068 (1.73)
"B"
.083 (2.11)
.042 (1.07)
142-0701-841
142-0701-846
.048 (1.22)
.103 (2.62)
.047 (1.19)
142-0711-881
142-0711-886
.053 (1.35)
.098 (2.24)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
End Launch Bulkhead Jack Receptacle Round Contact
VSWR & FREQ. RANGE
VSWR: N/A
0-18 GHz
BOARD THICKNESS
GOLD PLATED
NICKEL PLATED
“A”
“B”
.062 (1.57)
142-0701-871
142-0701-876
.068 (1.73)
.073 (1.85)
.069 (1.75)
142-0721-841
142-0721-846
.075 (1.91)
.066 (1.68)
.074 (1.88)
142-0721-871
142-0721-876
.080 (2.03)
.061 (1.55)
End Launch Bulkhead Jack Receptacle Round Contact
VSWR & FREQ. RANGE
VSWR: N/A 0-18 GHz
BOARD THICKNESS GOLD PLATED
.062 (1.57)
142-0711-811
NICKEL PLATED
142-0711-816
End Launch Jack Receptacle - Surface Mount
NEW
VSWR & FREQ. RANGE
VSWR: N/A 0-18 GHz
GOLD PLATED
PACKAGING
142-0721-881
Stock
Tape and Reel
475 pcs/reel
142-0721-882
Call factory for recommended land pattern.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
7
SMA Reverse Polarity
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Alphabetical Index
142-4303-401 4
SMA Reverse Polarity
142-4303-406 4
connectors for FCC Rule 15
142-4304-401 4
FCC regulation (Part 15.203)
142-4304-406 4
stipulates that wireless de142-4307-401 4
vices with removable anten142-4307-406 4
nas require a non-standard
142-4308-401 4
antenna connection to the
142-4308-406 4
hand-held device. To meet
142-4403-001 3
this requirement, Johnson
142-4403-006 3
Components ® designs and
142-4403-101 3, 4
manufactures non-standard
142-4403-106 3, 4
142-4404-001 3
mating SMA connectors.
142-4404-006 3
142-4404-101 3
Reverse polarity connectors
142-4404-106 3
employ female contacts in the
142-4407-001 3
plug connector and male con142-4407-006 3
tacts in the jack connector.
142-4407-101 3, 4
Johnson Components® manu142-4407-106 3, 4
factures straight and right
142-4408-001 3
angle cabled plugs and bulk142-4408-006 3
head jacks; along with straight
142-4408-101 3
and right angle bulkhead jack
142-4408-106 3
142-4435-001 3
receptacles and an end
142-4435-006 3
launch jack receptacle in the
142-4435-101 4
reverse polarity style.
142-4435-106 4
142-4439-001 3
142-4439-006 3
142-4439-101 4
142-4439-106 4
142-4701-201 5
142-4701-206 5
142-4701-501 5
142-4701-506 5
142-4701-801 5
142-4701-806 5
End Launch Bulkhead Jack Receptacle 5
Right Angle Bulkhead Jack Receptacle 5
Right Angle Crimp Type Plug - Captivated Contact 3
Right Angle Crimp Type Plug - Captivated Contact 4
Specifications 2
Straight Crimp Type Bulkhead Jack - Captivated Contact 4
Straight Crimp Type Plug - Captivated Contact 3
Straight Crimp Type Plug - Solder or Crimp 3
Straight Jack Receptacle 5
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMA Reverse Polarity - 50 Ohm
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range:
Flexible cable connectors ..................................................... 0-12.4 GHz
Uncabled receptacles ........................................................... 0-18.0 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors
Cabled Connectors
RG-316, LMR-100 cable ........... 1.15 + .02f
1.15 + .03f
RG-58, LMR-195 cable ............ 1.17 + .025f
1.17 + .06f
RG-142 cable ............................ 1.17 + .02f
1.15 + .03f
LMR-200, LMR-240 cable ............. 1.10 + .03f
1.10 + .06f
Uncabled receptacles .......................................................................... N/A
✝
Working Voltage: (Vrms maximum)
Connectors for Cable Type
Sea Level 70K Feet
RG-316; LMR-100, 195, 200 ................................... 250
65
RG-58, RG-142, LMR-240, uncabled receptacles .. 335
85
✝
Dielectric Withstanding Voltage: (VRMS minimum at sea level)
Connectors for RG-316; LMR-100, 195, 200 ...................................... 750
Connectors for RG-58, RG-142, LMR-240, uncabled receptacles . 1000
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-316, LMR-100, 195, 200 ................................... 190
Connectors for RG-58, RG-142, LMR-240, uncabled receptacles ... 250
Insertion Loss: (dB maximum)
Straight flexible cable
connectors ................................ .06 f (GHz), tested at 6 GHz
Right angle flexible cable
connectors ................................ 0.15 f (GHz), tested at 6 GHz
Low loss flexible straight
cable connectors ............................. 0.06
f (GHz), tested at 1 GHz
Low loss flexible right angle
cable connectors ....................... 0.15 f (GHz), tested at 1 GHz
Uncabled receptacles, field replaceable ............................................ N/A
Insulation Resistance: 5000 megohms minimum
Contact Resistance: (milliohms maximum)
After
Initial
Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ............................ 3.0*
4.0*
Center contact (right angle cabled
connectors ...................................................... 4.0
6.0
Outer contact (all connectors) ............................ 2.0
N/A
Braid to body (gold plated connectors) .............. 0.5
N/A
Braid to body (nickel plated connectors) ............ 5.0
N/A
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors ............................................................. -60 dB
Uncabled receptacles and adapters ................................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-316; LMR-100, 195, 200 ................................... 500
Connectors for RG-58, RG-142, LMR-240, uncabled receptacles ... 670
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60 pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-316, LMR-100 ............ 20
N/A
Connectors for LMR195, 200 .................... 30
N/A
Connectors for RG-58, LMR-240 .............. 40
N/A
Connectors for RG-142 ............................. 45
N/A
*Or cable breaking strength whichever is less.
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph
of MIL-C-39012)
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204
.00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MILG-45204 .00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or
Tefzel per ASTM D 3159
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold
plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per
MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
MATING ENGAGEMENT FOR SMA REVERSE POLARITY SERIES PER FCC RULE 15 NON-STANDARD INTERFACE
PLUG
PLUG
2
NOTES
1. ID OF CONTACT TO MEET VSWR,
CONTACT RESISTANCE AND INSERTION
WITHDRAWAL FORCES WHEN MATED
WITH DIA .0355-.0370 MALE PIN.
JACK
JACK
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA Reverse Polarity - 50 Ohm
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug - Solder or Crimp
Captivated Contact
CABLE TYPE
RG 316/U, 188, 174, 161
RG 316 DS, 188DS
GOLD PLATED
142-4403-001
142-4404-001
142-4404-006
RG 58/U, 141, 303
142-4407-001
142-4407-006
RG 142/U, 55, 223, 400
142-4408-001
142-4408-006
NICKEL PLATED
142-4403-006
Assembly instructions page 158.
See page 132 for Cable Assembly Tools.
Straight Crimp Type Plug - Captivated Contact
Low Loss Cable
NEW
CABLE TYPE
VSWR & FREQ. RANGE
GOLD PLATED NICKEL PLATED
“A”
LMR-100, HPF-100, RF-100 1.15 + .02 f (GHz) 0-12.4 GHz
142-4403-001
142-4403-006
.706 (17.93)
LMR-195, HPF-195, RF-195 1.17 + .025 f (GHz) 0-12.4 GHz
LMR-200, HPF-200, RF-200 1.10 + .07 f (GHz) 0-12.4 GHz
142-4407-001
142-4439-001
142-4407-006
142-4439-006
.706 (17.93)
.844 (21.44)
LMR-240, HPF-240, RF-240 1.10 + .07 f (GHz)
142-4435-001
142-4435-006
.844 (21.44)
0-12.4 GHz
Assembly instructions pages 158
and 159. See page 132 for Cable
Assembly Tools.
Right Angle Crimp Type Plug - Captivated Contact
CABLE TYPE
RG 316/U, 188, 174, 161
GOLD PLATED
142-4403-101
NICKEL PLATED
142-4403-106
RG 316 DS, 188DS
142-4404-101
142-4404-106
RG 58/U, 141, 303
142-4407-101
142-4407-106
RG 142/U, 55, 223, 400
142-4408-101
142-4408-106
Assembly instructions page 161.
See page 132 for Cable Assembly Tools.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMA Reverse Polarity - 50 Ohm
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Crimp Type Plug - Captivated Contact
Low Loss Cable
NEW
VSWR & FREQ. RANGE
CABLE TYPE
GOLD PLATED NICKEL PLATED
LMR-100, HPF-100, RF-100 1.15 + .03 f (GHz) 0-12.4 GHz
142-4403-101
LMR-195, HPF-195, RF-195 1.17 + .06f (GHz) 0-12.4 GHz
LMR-200, HPF-200, RF-200 1.10 + .09f (GHz) 0-12.4 GHz
LMR-240, HPF-240, RF-240 1.10 + .09f (GHz)
0-12.4 GHz
“A”
“B”
142-4403-106
.611 (15.52) .470 (11.94)
142-4407-101
142-4407-106
142-4439-101
142-4439-106
.611 (15.52) .470 (11.94)
.611 (15.52) .470 (11.94)
142-4435-101
142-4435-106
.635 (16.13) .490 (12.45)
Straight Crimp Type Bulkhead Jack - Captivated Contact
CABLE TYPE
RG 316/U, 188, 174, 161
4
GOLD PLATED
142-4303-401
NICKEL PLATED
142-4303-406
RG 316 DS, 188DS
142-4304-401
142-4304-406
RG 58/U, 141, 303
142-4307-401
142-4307-406
RG 142/U, 55, 223, 400
142-4308-401
142-4308-406
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA Reverse Polarity - 50 Ohm
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Jack Receptacle
GOLD PLATED
142-4701-201
NICKEL PLATED
142-4701-206
Right Angle Bulkhead Jack Receptacle
GOLD PLATED
142-4701-501
NICKEL PLATED
142-4701-506
End Launch Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
BOARD THICKNESS
142-4701-801
142-4701-806
.062 (1.57)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMA Reverse Thread
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
142-5303-401 4
142-5303-406 4
142-5304-401 4
142-5304-406 4
142-5307-401 4
142-5307-406 4
142-5308-401 4
142-5308-406 4
142-5403-001 3
142-5403-006 3
142-5403-101 3, 4
142-5403-106 3, 4
142-5404-001 3
142-5404-006 3
142-5404-101 3
142-5404-106 3
142-5407-001 3
142-5407-006 3
142-5407-101 3, 4
142-5407-106 3, 4
142-5408-001 3
142-5408-006 3
142-5408-101 3
142-5408-106 3
142-5435-001 3
142-5435-006 3
142-5435-101 4
142-5435-106 4
142-5439-001 3
142-5439-006 3
142-5439-101 4
142-5439-106 4
142-5701-201 5
142-5701-206 5
142-5701-501 5
142-5701-506 5
142-5701-811 5
142-5701-816 5
End Launch Bulkhead Jack Receptacle 5
Right Angle Bulkhead Jack Receptacle 5
Right Angle Crimp Type Plug - Captivated Contact 4
Right Angle Crimp Type Plug - Captivated Contact 3
Specifications 2
Straight Crimp Type Bulkhead Jack - 4
Straight Crimp Type Plug - 3
Straight Crimp Type Plug - Solder or Crimp 3
Straight Jack Receptacle 5
Alphabetical Index
SMA Reverse Thread connectors for FCC Rule 15
FCC regulation (Part 15.203) stipulates that wireless devices with removable antennas require a nonstandard antenna connection to the
hand-held device. To meet this requirement, Johnson Components®
designs and manufactures nonstandard mating SMA connectors.
The least costly method is to simply employ reverse threads (left
hand). Reverse threads completely
prevent intermate with standard
connectors. The threads are produced with minor changes to our
machining process, so the cost is
similar to a standard interface.
Johnson Components® carries a full
line of cabled straight and right
angle plugs and bulkhead jacks;
along with straight and right angle
bulkhead jack receptacles and a pc
end launch jack receptacle in the
reverse thread style.and right angle
bulkhead jack receptacles and an
end launch jack receptacle in the
reverse polarity style.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMA Reverse Thread - 50 Ohm
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range:
Flexible cable connectors ..................................................... 0-12.4 GHz
Uncabled receptacles ........................................................... 0-18.0 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors
Cabled Connectors
RG-316, LMR-100 cable ........... 1.15 + .02f
1.15 + .03f
RG-58, LMR-195 cable ............. 1.15 + .01f
1.15 + .02f
RG-142 cable ............................ 1.15 + .01f
1.15 + .02f
LMR-200, LMR-240 cable ............. 1.10 + .03f
1.10 + .06f
Uncabled receptacles .......................................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level 70K Feet
RG-316; LMR-100, 195, 200 ........................................... 250
65
RG-58, RG-142, LMR-240, uncabled receptacles .... 335
8
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-316; LMR-100, 195, 200 ...................................... 750
Connectors for RG-58, RG-142, LMR-240, uncabled receptacles .. 1000
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-316, LMR-100, 195, 200 ................................... 190
Connectors for RG-58, RG-142, LMR-240, uncabled receptacles ... 250
Insertion Loss: (dB maximum)
Straight flexible cable
connectors ................................ .06
f (GHz), tested at 6 GHz
Right angle flexible cable
connectors ................................ 0.15 f (GHz), tested at 6 GHz
Low loss flexible straight
cable connectors ............................. 0.06
f (GHz), tested at 1 GHz
Low loss flexible right angle
cable connectors ............................. 0.15
f (GHz), tested at 1 GHz
Uncabled receptacles, field replaceable ...................................... N/A
Insulation Resistance: 5000 megohms minimum
Contact Resistance: (milliohms maximum)
After
Initial
Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ............................ 3.0*
4.0*
Center contact (right angle cabled
connectors ...................................................... 4.0
6.0
Outer contact (all connectors) ............................ 2.0
N/A
Braid to body (gold plated connectors) .............. 0.5
N/A
Braid to body (nickel plated connectors) ............ 5.0
N/A
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors ............................................................. -60 dB
Uncabled receptacles and adapters ................................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-316; LMR-100, 195, 200 ................................... 500
Connectors for RG-58, RG-142, LMR-240, uncabled receptacles ... 670
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60 pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-316, LMR-100 ............ 20
N/A
Connectors for LMR-195, 200 ................... 30
N/A
Connectors for RG-58; LMR-240 .............. 40
N/A
Connectors for RG-142 ............................. 45
N/A
*Or cable breaking strength whichever is less.
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph
of MIL-C-39012)
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204
.00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MILG-45204 .00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or
Tefzel per ASTM D 3159
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold
plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per
MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mating Engagement for SMA Reverse Thread Series per FCC Rule 15 Non-Standard Interface
PLUG
JACK
JACK
2
NOTES
1. ID OF CONTACT TO
MEET VSWR, CONTACT
RESISTANCE AND
INSERTION
WITHDRAWAL FORCES
WHEN MATED WITH DIA
.0355-.0370 MALE PIN.
PLUG
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA Reverse Thread - 50 Ohm
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug - Solder or Crimp
Captivated Contact
CABLE TYPE
GOLD PLATED
RG 316/U, 188, 174, 161
RG 316 DS, 188DS
RG 58/U, 141, 303
142-5403-001
142-5404-001
142-5407-001
NICKEL PLATED
142-5403-006
142-5404-006
142-5407-006
RG 142/U, 55, 223, 400
142-5408-001
142-5408-006
Straight Crimp Type Plug - Captivated Contact
Low Loss Cable
NEW
CABLE TYPE
GOLD PLATED NICKEL PLATED
VSWR & FREQ. RANGE
“A”
LMR-100, HPF-100, RF-100 1.15 + .02 f (GHz) 0-12.4 GHz
142-5403-001
142-5403-006
.706 (17.93)
LMR-195, HPF-195, RF-195 1.15 + .01 f (GHz) 0-12.4 GHz
LMR-200, HPF-200, RF-200 1.10 + .03f (GHz) 0-12.4 GHz
142-5407-001
142-5439-001
142-5407-006
142-5439-006
.706 (17.93)
.844 (21.44)
LMR-240, HPF-240, RF-240 1.10 + .03f (GHz)
142-5435-001
142-5435-006
.844 (21.44)
0-12.4 GHz
Right Angle Crimp Type Plug - Captivated Contact
CABLE TYPE
RG 316/U, 188, 174, 161
RG 316 DS, 188DS
RG 58/U, 141, 303
RG 142/U, 55, 223, 400
GOLD PLATED
142-5403-101
NICKEL PLATED
142-5403-106
142-5404-101
142-5404-106
142-5407-101
142-5408-101
142-5407-106
142-5408-106
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMA Reverse Thread - 50 Ohm
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Crimp Type Plug - Captivated Contact
Low Loss Cable
GOLD PLATED NICKEL PLATED
VSWR & FREQ. RANGE
CABLE TYPE
LMR-100, HPF-100, RF-100 1.15 + .03f (GHz)
“A”
“B”
0-12.4 GHz
142-5403-101
142-5403-106
.611 (15.52) .470 (11.94)
LMR-195, HPF-195, RF-195 1.15 + .02f (GHz) 0-12.4 GHz
LMR-200, HPF-200, RF-200 1.10 + .06f (GHz) 0-12.4 GHz
142-5407-101
142-5439-101
142-5407-106
142-5439-106
.611 (15.52) .470 (11.94)
.611 (15.52) .470 (11.94)
LMR-240, HPF-240, RF-240 1.10 + .06f (GHz)
142-5435-101
142-5435-106
.635 (16.13) .490 (12.45)
0-12.4 GHz
NEW
Straight Crimp Type Bulkhead Jack - Solder or Crimp
Captivated Contact
CABLE TYPE
RG 316/U, 188, 174, 161
RG 316 DS, 188DS
RG 58/U, 141, 303
RG 142/U, 55, 223, 400
4
GOLD PLATED
142-5303-401
NICKEL PLATED
142-5303-406
142-5304-401
142-5304-406
142-5307-401
142-5307-406
142-5308-401
142-5308-406
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA Reverse Thread - 50 Ohm
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Jack Receptacle
GOLD PLATED
142-5701-201
NICKEL PLATED
142-5701-206
Mounting hole layout figure 2 page 174.
Right Angle Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
142-5701-501
142-5701-506
Mounting hole layout figure 1 and 2 page 174.
End Launch Bulkhead Jack Receptacle Round Contact
GOLD PLATED
NICKEL PLATED
BOARD THICKNESS
142-5701-811
142-5701-816
.062 (1.57)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMA - 50 Ohm Connectors
Alphabetical Index
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
142-0593-001 6
142-0593-006 6
142-0593-401 6
142-0593-406 6
142-0594-001 6
142-0594-006 6
142-0594-401 6
142-0594-406 6
142-0693-001 4
142-0693-006 4
142-0693-051 5
142-0693-056 5
142-0693-101 4
142-0693-106 4
142-0694-001* 4
142-0694-006* 4
142-0694-011 4
142-0694-016 4
142-0694-021 5
142-0694-026 5
142-0694-031 5
142-0694-036 5
142-0694-041 6
142-0694-046 6
142-0694-051 5
142-0694-056 5
142-0694-101 4
142-0694-106 4
MATERIAL SPECIFICATIONS 3
Right Angle Solder Type Plug (1-piece body) 4
Specifications 2
Straight Solder Type Bulkhead Jack 6
Straight Solder Type Jack 6
Straight Solder Type Plug 4, 5, 6
Straight Solder Type Plug - Short Profile 5
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range:
Dummy loads .......................................................................... 0-2 GHz
Flexible cable connectors ................................................... 0-12.4 GHz
Uncabled receptacles, RA semi-rigid and adapters ........... 0-18.0 GHz
Straight semi-rigid cable connectors and
field replaceable connectors ............................................... 0-26.5 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors Cabled Connectors
RG-178 cable .............................. 1.20 + .025f
1.20 + .03f
RG-316, LMR-100 cable .............. 1.15 + .02f
1.15 + .03f
RG-58, LMR-195 cable ................ 1.15 + .01f
1.15 + .02f
RG-142 cable ............................... 1.15 + .01f
1.15 + .02f
LMR-200, LMR-240 cable ............ 1.10 + .03f
1.10 + .06f
.086 semi-rigid ............................ 1.07 + .008f
1.18 + .015f
.141 semi-rigid (w/contact) .......... 1.05 + .008f
1.15 + .015f
.141 semi-rigid (w/o contact) ...... 1.035 + .005f
Jack-bulkhead jack adapter and plug-plug adapter ................. 1.05 + .01f
Jack-jack adapter and plug-jack adapter ............................... 1.05 + .005f
Uncabled receptacles, dummy loads .................................................. N/A
Field replaceable (see page 59) ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level 70K Feet
RG-178 ...................................................................... 170
45
RG-316; LMR-100, 195, 200 ..................................... 250
65
RG-58, RG-142, LMR-240, .086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact ... 335
85
.141 semi-rigid with contact and adapters ................. 500
125
Dummy loads ................................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ................................................................... 500
Connectors for RG-316; LMR-100, 195, 200 .................................. 750
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
field replaceable, uncabled receptacles ...................................... 1000
Connectors for .141 semi-rigid with contact and adapters ............ 1500
Connectors for .141 semi-rigid w/o contact, dummy loads .............. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ................................................................... 125
Connectors for RG-316; LMR-100, 195, 200 .................................. 190
Connectors for RG-58, RG-142, LMR-240, 086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact .......................... 250
Connectors for .141 semi-rigid with contact and adapters .............. 375
Dummy loads ...................................................................................... N/A
Insertion Loss: (dB maximum)
Straight flexible cable connectors
and adapters ...................... 0.06
f (GHz), tested at 6 GHz
Right angle flexible cable
connectors ......................... 0.15
f (GHz), tested at 6 GHz
Straight semi-rigid cable
connectors with contact ..... 0.03
f (GHz), tested at 10 GHz
Right angle semi-rigid cable
connectors ......................... 0.05
f (GHz), tested at 10 GHz
Straight semi-rigid cable
connectors w/o contact ...... 0.03
f (GHz), tested at 16 GHz
Straight low loss flexible
cable connectors ................ 0.06
f (GHz), tested at 1 GHz
Right Angle low loss flexible
cable connectors ................ 0.15
f (GHz), tested at 1 GHz
Uncabled receptacles, field replaceable, dummy loads ..................... N/A
Insulation Resistance: 5000 megohms minimum
Contact Resistance: (milliohms maximum) Initial After Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ........................... 3.0*
4.0*
Center contact (right angle cabled
connectors and adapters) .............................. 4.0
6.0
Field replaceable connectors ........................ 6.0
8.0
Outer contact (all connectors) ........................... 2.0
N/A
Braid to body (gold plated connectors) ............. 0.5
N/A
Braid to body (nickel plated connectors) ........... 5.0
N/A
*N/A where the cable center conductor is used as a contact
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors, adapters and .141 semi-rigid
connectors w/o contact ............................................................. -60 dB
Field replaceable w/o EMI gasket .............................................. -70 dB
.086 semi-rigid connectors and .141 semi-rigid connectors
with contact, and field replaceable with EMI Gasket ................ -90 dB
Two-way adapters ...................................................................... -90 dB
Uncabled receptacles, dummy loads .............................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 ................................................................... 335
Connectors for RG-316; LMR-100, 195, 200 .................................. 500
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
.141 semi-rigid cable w/o contact, uncabled receptacles .............. 670
Connectors for .141 semi-rigid with contact and adapters ............ 1000
Power Rating (Dummy Load): 0.5 watt @ + 25oC, derated to 0.25 watt @
+125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds minimum
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60 pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*(lbs) Torque (in-oz)
Connectors for RG-178 ............................ 10
N/A
Connectors for RG-316, LMR-100 ........... 20
N/A
Connectors for LMR-195, 200 .................. 30
N/A
Connectors for RG-58, LMR-240 ............. 40
N/A
Connectors for RG-142 ............................ 45
N/A
Connectors for .086 semi-rigid ................. 30
16
Connectors for .141 semi-rigid ................. 60
55
*Or cable breaking strength whichever is less.
Durability: 500 cycles minimum
100 cycles minimum for .141 semi-rigid connectors w/o contact
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
†Avoid user injury due to misapplication. See safety advisory definitions on page 2.
2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or Tefzel per ASTM D 3159
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Seal Rings: Silicone rubber per ZZ-R-765
EMI Gaskets: Conductive silicone rubber per MIL-G-83528, Type M
* All gold plated parts include a .00005" min. nickel underplate barrier layer.
Mating Engagement for SMA Series per MIL-C-39012
JACK
PLUG
PLUG
JACK
NOTES
1. ID OF CONTACT TO MEET VSWR, CONTACT RESISTANCE AND INSERTION WITHDRAWAL FORCES
WHEN MATED WITH DIA .0355-.0370 MALE PIN.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMA - 50 Ohm Connectors
For Semi-Rigid Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Solder Type Plug - with contact, captive nut
Thin wall connector interface for .141 cable
FIG. 1
THICKWALL
FIG. 2
THINWALL
.086 Semi-Rigid
VSWR & FREQ. RANGE
1.07 + .008 f (0-18 GHz) 1.35 Max (18-26.5 GHz)
GOLD PLATED
142-0693-001
NICKEL PLATED
142-0693-006
FIG.
1
.141 Semi-Rigid
1.05+.008 f (0-26.5 GHz)
142-0694-001*
142-0694-006*
2
CABLE TYPE
*Mating torque 8 inch-pounds maximum, coupling proof torque 8 inch-pounds maximum.
Straight Solder Type Plug - without contact, thread-on nut
CABLE TYPE
VSWR & FREQ. RANGE
GOLD PLATED
.141 Semi-Rigid
1.035 + .005 f (0-26.5 GHz)
142-0694-011
NICKEL PLATED
142-0694-016
Center conductor of cable serves as contact.
Right Angle Solder Type Plug (1-piece body)
CABLE TYPE
4
VSWR & FREQ. RANGE
GOLD PLATED
NICKEL PLATED
“A”
“B”
.086
Semi-rigid
1.18 +.015f (0-12.4 GHz)
1.15 +.04f (12.4-18 GHz)
142-0693-101
142-0693-106
.409 (10.39)
.253 (6.43)
.141
Semi-rigid
1.15 +.015f (0-12.4 GHz)
1.15 +.04f (12.4-18 GHz)
142-0694-101
142-0694-106
.462 (11.73)
.306 (7.77)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
For Semi-Rigid Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Solder Type Plug - with contact, thread-on nut
CABLE TYPE
VSWR & FREQ. RANGE
GOLD PLATED NICKEL PLATED
“A”
.086
Semi-Rigid
1.07 + .008 f (0-18 GHz)
1.35 Max (18-26.5 GHz)
142-0693-051
142-0693-056
.405 (10.29)
.141
Semi-Rigid
1.05+.008 f (GHz)
0-26.5 GHz
142-0694-051
142-0694-056
.438 (11.13)
Straight Solder Type Plug - Short Profile without contact, captive nut
CABLE TYPE
.141
Semi-Rigid
VSWR & FREQ. RANGE
1.035 + .005 f (GHz)
0-26.5 GHz
GOLD PLATED
NICKEL PLATED
142-0694-031
142-0694-036
Center conductor of cable serves as contact.
Straight Solder Type Plug - without contact, slide-on nut
CABLE TYPE
VSWR & FREQ. RANGE
.141 Semi-Rigid
1.035 + .005 f (GHz)
0-26.5 GHz
GOLD PLATED NICKEL PLATED
142-0694-021
142-0694-026
Center conductor of cable serves as contact.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMA - 50 Ohm Connectors
For Semi-Rigid Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Solder Type Plug - without contact,
slide-on notched nut
CABLE TYPE
VSWR & FREQ. RANGE
.141 Semi-Rigid
1.035 + .005 f (GHz)
0-26.5 GHz
GOLD PLATED NICKEL PLATED
142-0694-041
142-0694-046
Center conductor of cable serves as contact.
Straight Solder Type Jack
CABLE TYPE
VSWR & FREQ. RANGE
.086
Semi-Rigid
0-18 GHz:
1.07 + .008 f (GHz)
26.5 GHz: 1.35 Max
0-26.5 GHz:
1.05+.008 f (GHz)
.141
Semi-Rigid
GOLD PLATED NICKEL PLATED
142-0593-001
142-0593-006
142-0594-001
142-0594-006
Straight Solder Type Bulkhead Jack
CABLE TYPE
.086
Semi-Rigid
.141
Semi-Rigid
6
VSWR & FREQ. RANGE
0-18 GHz:
1.07 + .008 f (GHz)
26.5 GHz: 1.35 Max
0-26.5 GHz:
1.05+.008 f (GHz)
GOLD PLATED NICKEL PLATED
142-0593-401
142-0593-406
142-0594-401
142-0594-406
Mounting hole layout Figure 1 page 174.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Alphabetical Index
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
142-0102-011
142-0102-016
142-0102-401
142-0102-406
142-0103-011
142-0103-016
142-0103-401
142-0103-406
142-0107-011
142-0107-016
142-0107-401
142-0107-406
142-0202-011
142-0202-016
142-0202-101
142-0202-106
142-0203-011
142-0203-016
142-0203-101
142-0203-106
142-0207-011
142-0207-016
142-0207-101
142-0207-106
142-0302-001
142-0302-006
142-0302-011
142-0302-016
142-0302-401
142-0302-406
142-0302-431
142-0302-436
142-0303-001
142-0303-006
142-0303-011
142-0303-016
142-0303-401
142-0303-406
142-0303-411
142-0303-416
142-0304-001
142-0304-006
142-0304-011
142-0304-016
142-0304-401
8
8
9
9
8
8
9
9
8
8
9
9
7
7
8
8
7
7
8
8
7
7
8
8
6
6
6
6
6
6
7
7
6
6
6
6
6
6
7
7
6
6
6
6
6
142-0304-406
142-0304-411
142-0304-416
142-0307-001
142-0307-006
142-0307-011
142-0307-016
142-0307-401
142-0307-406
142-0307-411
142-0307-416
142-0308-001
142-0308-006
142-0308-011
142-0308-016
142-0308-401
142-0308-406
142-0308-411
142-0308-416
142-0333-011
142-0333-016
142-0333-411
142-0333-416
142-0335-401
142-0335-406
142-0339-401
142-0339-406
142-0402-001
142-0402-006
142-0402-011
142-0402-016
142-0402-101
142-0402-106
142-0403-001
142-0403-006
142-0403-011
142-0403-016
142-0403-101
142-0403-106
142-0404-001
142-0404-006
142-0404-011
142-0404-016
142-0404-101
142-0404-106
6
7
7
6
6
6
6
6
6
7
7
6
6
6
6
6
6
7
7
6
6
7
7
7
7
7
7
4
4
4
4
5
5
4
4
4
4
5
5
4
4
4
4
5
5
142-0407-001
142-0407-006
142-0407-011
142-0407-016
142-0407-101
142-0407-106
142-0408-001
142-0408-006
142-0408-011
142-0408-016
142-0408-101
142-0408-106
142-0433-011
142-0433-016
142-0433-101
142-0433-106
142-0435-001
142-0435-006
142-0435-101
142-0435-106
142-0439-001
142-0439-006
142-0439-101
142-0439-106
142-0801-421
142-2403-001
142-2403-006
142-2404-001
142-2404-006
4
4
4
4
5
5
4
4
4
4
5
5
4
4
5
5
4
4
5
5
4
4
5
5
9
5
5
5
5
MATERIAL SPECIFICATIONS 3
Rear Mount Bulkhead Plug - Antenna Connector 9
Right Angle Clamp Type Plug 8
Right Angle Crimp Type Plug 5
Specifications 2
Straight Clamp Type Bulkhead Jack 9
Straight Clamp Type Jack 8
Straight Clamp Type Plug 7
Straight Crimp Type Bulkhead Jack 6, 7
Straight Crimp Type Jack 6
Straight Crimp Type Plug 4, 5
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range:
Dummy loads .......................................................................... 0-2 GHz
Flexible cable connectors ................................................... 0-12.4 GHz
Uncabled receptacles, RA semi-rigid and adapters ........... 0-18.0 GHz
Straight semi-rigid cable connectors and
field replaceable connectors ............................................... 0-26.5 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors Cabled Connectors
RG-178 cable .............................. 1.20 + .025f
1.20 + .03f
RG-316, LMR-100 cable .............. 1.15 + .02f
1.15 + .03f
RG-58, LMR-195 cable ................ 1.15 + .01f
1.15 + .02f
RG-142 cable ............................... 1.15 + .01f
1.15 + .02f
LMR-200, LMR-240 cable ............ 1.10 + .03f
1.10 + .06f
.086 semi-rigid ............................ 1.07 + .008f
1.18 + .015f
.141 semi-rigid (w/contact) .......... 1.05 + .008f
1.15 + .015f
.141 semi-rigid (w/o contact) ...... 1.035 + .005f
Jack-bulkhead jack adapter and plug-plug adapter ................. 1.05 + .01f
Jack-jack adapter and plug-jack adapter ............................... 1.05 + .005f
Uncabled receptacles, dummy loads .................................................. N/A
Field replaceable (see page 59) ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level 70K Feet
RG-178 ...................................................................... 170
45
RG-316; LMR-100, 195, 200 ..................................... 250
65
RG-58, RG-142, LMR-240, .086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact ... 335
85
.141 semi-rigid with contact and adapters ................. 500
125
Dummy loads ................................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ................................................................... 500
Connectors for RG-316; LMR-100, 195, 200 .................................. 750
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
field replaceable, uncabled receptacles ...................................... 1000
Connectors for .141 semi-rigid with contact and adapters ............ 1500
Connectors for .141 semi-rigid w/o contact, dummy loads .............. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ................................................................... 125
Connectors for RG-316; LMR-100, 195, 200 .................................. 190
Connectors for RG-58, RG-142, LMR-240, 086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact .......................... 250
Connectors for .141 semi-rigid with contact and adapters .............. 375
Dummy loads ...................................................................................... N/A
Insertion Loss: (dB maximum)
Straight flexible cable connectors
and adapters ...................... 0.06
f (GHz), tested at 6 GHz
Right angle flexible cable
connectors ......................... 0.15
f (GHz), tested at 6 GHz
Straight semi-rigid cable
connectors with contact ..... 0.03
f (GHz), tested at 10 GHz
Right angle semi-rigid cable
connectors ......................... 0.05
f (GHz), tested at 10 GHz
Straight semi-rigid cable
connectors w/o contact ...... 0.03
f (GHz), tested at 16 GHz
Straight low loss flexible
cable connectors ................ 0.06
f (GHz), tested at 1 GHz
Right Angle low loss flexible
cable connectors ................ 0.15
f (GHz), tested at 1 GHz
Uncabled receptacles, field replaceable, dummy loads ..................... N/A
Insulation Resistance: 5000 megohms minimum
Contact Resistance: (milliohms maximum) Initial After Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ........................... 3.0*
4.0*
Center contact (right angle cabled
connectors and adapters) .............................. 4.0
6.0
Field replaceable connectors ........................ 6.0
8.0
Outer contact (all connectors) ........................... 2.0
N/A
Braid to body (gold plated connectors) ............. 0.5
N/A
Braid to body (nickel plated connectors) ........... 5.0
N/A
*N/A where the cable center conductor is used as a contact
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors, adapters and .141 semi-rigid
connectors w/o contact ............................................................. -60 dB
Field replaceable w/o EMI gasket .............................................. -70 dB
.086 semi-rigid connectors and .141 semi-rigid connectors
with contact, and field replaceable with EMI Gasket ................ -90 dB
Two-way adapters ...................................................................... -90 dB
Uncabled receptacles, dummy loads .............................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 ................................................................... 335
Connectors for RG-316; LMR-100, 195, 200 .................................. 500
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
.141 semi-rigid cable w/o contact, uncabled receptacles .............. 670
Connectors for .141 semi-rigid with contact and adapters ............ 1000
Power Rating (Dummy Load): 0.5 watt @ + 25oC, derated to 0.25 watt @
+125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds minimum
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60 pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*(lbs) Torque (in-oz)
Connectors for RG-178 ............................ 10
N/A
Connectors for RG-316, LMR-100 ........... 20
N/A
Connectors for LMR-195, 200 .................. 30
N/A
Connectors for RG-58, LMR-240 ............. 40
N/A
Connectors for RG-142 ............................ 45
N/A
Connectors for .086 semi-rigid ................. 30
16
Connectors for .141 semi-rigid ................. 60
55
*Or cable breaking strength whichever is less.
Durability: 500 cycles minimum
100 cycles minimum for .141 semi-rigid connectors w/o contact
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
†Avoid user injury due to misapplication. See safety advisory definitions on page 2.
2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or Tefzel per ASTM D 3159
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Seal Rings: Silicone rubber per ZZ-R-765
EMI Gaskets: Conductive silicone rubber per MIL-G-83528, Type M
* All gold plated parts include a .00005" min. nickel underplate barrier layer.
Mating Engagement for SMA Series per MIL-C-39012
JACK
PLUG
PLUG
JACK
NOTES
1. ID OF CONTACT TO MEET VSWR, CONTACT RESISTANCE AND INSERTION WITHDRAWAL FORCES
WHEN MATED WITH DIA .0355-.0370 MALE PIN.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMA - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug - Captivated Contact
VSWR & FREQ. RANGE
GOLD PLATED NICKEL PLATED
CABLE TYPE
RG-178/U, 196
1.20 + .025 f (GHz) 0-12.4 GHz
142-0402-001
142-0402-006
RG-161/U, 174,188, 316
1.15 + .02 f (GHz) 0-12.4 GHz
142-0403-001
142-0403-006
RG-188 DS, RG-316 DS
1.15 + .02 f (GHz) 0-12.4 GHz
142-0404-001
142-0404-006
RG-58/U, 141, 303
1.15 + .01 f (GHz) 0-12.4 GHz
142-0407-001
142-0407-006
RG-55/U, 142, 223, 400
1.15 + .01 f (GHz) 0-12.4 GHz
142-0408-001
142-0408-006
Straight Crimp Type Plug (3-piece) Solder or Crimp Captivated Contact
CABLE
TYPE
RG-178/U, 196
VSWR &
FREQ. RANGE
1.20 + .025 f (GHz) 0-12.4 GHz
GOLD
PLATED
142-0402-011
NICKEL
PLATED
142-0402-016
“A”
.591 (15.01)
RG-161/U, 174,188, 316
1.15 + .02 f (GHz) 0-12.4 GHz
142-0403-011
142-0403-016
.706 (17.93)
RG-188 DS, RG-316 DS
1.15 + .02 f (GHz) 0-12.4 GHz
142-0404-011
142-0404-016
.706 (17.93)
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
1.15 + .01 f (GHz) 0-12.4 GHz
142-0407-011
142-0407-016
.706 (17.93)
1.15 + .01 f (GHz) 0-12.4 GHz
142-0408-011
142-0408-016
.706 (17.93)
RG-179/U, 187
N/A
142-0433-011
142-0433-016
.706 (17.93)
Straight Crimp Type Plug (3-piece) - Captivated Contact
Low Loss Cable
CABLE TYPE
VSWR & FREQ. RANGE
LMR-100, HPF-100, RF-100 1.15 + .02f (GHz)
GOLD PLATED
NICKEL PLATED
“A”
0-12.4 GHz
142-0403-011
142-0403-016
.706 (17.93)
LMR-195, HPF-195, RF-195 1.15 + .01f (GHz) 0-12.4 GHz
LMR-200, HPF-200, RF-200 1.10 + .03f (GHz) 0-12.4 GHz
142-0407-011
142-0439-001
142-0407-016
142-0439-006
.706 (17.93)
.844 (21.44)
LMR-240, HPF-240, RF-240 1.10 + .03f (GHz)
142-0435-001
142-0435-006
.844 (21.44)
4
0-12.4 GHz
NEW
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug - 3 Piece - Slide on Nut Solder or Crimp Captivated Contact
CABLE
TYPE
RG-161/U, 174,188, 316
VSWR &
FREQ. RANGE
1.15 + .02 f (GHz) 0-12.4 GHz
GOLD
PLATED
142-2403-001
NICKEL
PLATED
142-2403-006
RG-188 DS, RG-316 DS
1.15 + .02 f (GHz) 0-12.4 GHz
142-2404-001
142-2404-006
Right Angle Crimp Type Plug - Captivated Contact
CABLE
TYPE
RG-178/U, 196
VSWR &
FREQ. RANGE
1.20 + .03 f (GHz) 0-12.4 GHz
GOLD
PLATED
142-0402-101
NICKEL
PLATED
142-0402-106
RG-161/U, 174,188, 316
1.15 + .03 f (GHz) 0-12.4 GHz
142-0403-101
142-0403-106
RG-188 DS, RG-316 DS
1.15 + .03 f (GHz) 0-12.4 GHz
142-0404-101
142-0404-106
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
1.15 + .02 f (GHz) 0-12.4 GHz
142-0407-101
142-0408-101
142-0407-106
142-0408-106
RG-179/U, 187
N/A
142-0433-101
142-0433-106
1.15 + .02 f (GHz)
0-12.4 GHz
Right Angle Crimp Type Plug - Captivated Contact
Low Loss Cable
NEW
CABLE TYPE
VSWR & FREQ. RANGE
LMR-100, HPF-100, RF-100 1.15 + .03f (GHz)
GOLD PLATED
NICKEL PLATED
“A”
“B”
0-12.4 GHz
142-0403-101
142-0403-106
.611 (15.52) .470 (11.94)
LMR-195, HPF-195, RF-195 1.15 + .02f (GHz) 0-12.4 GHz
LMR-200, HPF-200, RF-200 1.10 + .06f (GHz) 0-12.4 GHz
142-0407-101
142-0407-106
142-0439-101
142-0439-106
.611 (15.52) .470 (11.94)
.611 (15.52) .470 (11.94)
LMR-240, HPF-240, RF-240 1.10 + .06f (GHz)
142-0435-101
142-0435-106
.635 (16.13) .490 (12.45)
0-12.4 GHz
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMA - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Jack - Captivated Contact
CABLE
TYPE
RG-178/U, 196
VSWR &
FREQ. RANGE
1.20 + .025 f (GHz) 0-12.4 GHz
GOLD
PLATED
142-0302-001
NICKEL
PLATED
142-0302-006
RG-161/U, 174,188, 316
1.15 + .02 f (GHz) 0-12.4 GHz
142-0303-001
142-0303-006
RG-188 DS, RG-316 DS
1.15 + .02 f (GHz) 0-12.4 GHz
142-0304-001
142-0304-006
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
1.15 + .01 f (GHz) 0-12.4 GHz
142-0307-001
142-0307-006
1.15 + .01 f (GHz) 0-12.4 GHz
142-0308-001
142-0308-006
Straight Crimp Type Jack (3-piece) Solder or Crimp Captivated Contact
CABLE
TYPE
RG-178/U, 196
VSWR &
FREQ. RANGE
1.20 + .025 f (GHz) 0-12.4 GHz
GOLD
PLATED
142-0302-011
NICKEL
PLATED
142-0302-016
“A”
.651 (16.54)
RG-161/U, 174,188, 316
1.15 + .02 f (GHz) 0-12.4 GHz
142-0303-011
142-0303-016
.756 (19.20)
RG-188 DS, RG-316 DS
1.15 + .02 f (GHz) 0-12.4 GHz
142-0304-011
142-0304-016
.756 (19.20)
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
1.15 + .01 f (GHz) 0-12.4 GHz
142-0307-016
.756 (19.20)
1.15 + .01 f (GHz) 0-12.4 GHz
142-0307-011
142-0308-011
142-0308-016
.756 (19.20)
RG-179/U, 187
N/A
142-0333-011
142-0333-016
.756 (19.20)
Straight Crimp Type Bulkhead Jack - Captivated Contact
6
CABLE
TYPE
RG-178/U, 196
VSWR &
FREQ. RANGE
1.20 + .025 f (GHz) 0-12.4 GHz
GOLD
PLATED
142-0302-401
NICKEL
PLATED
142-0302-406
RG-161/U, 174,188, 316
RG-188 DS, RG-316 DS
1.15 + .02 f (GHz) 0-12.4 GHz
142-0303-401
142-0303-406
1.15 + .02 f (GHz) 0-12.4 GHz
142-0304-401
142-0304-406
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
1.15 + .01 f (GHz) 0-12.4 GHz
142-0307-401
142-0307-406
1.15 + .01 f (GHz) 0-12.4 GHz
142-0308-401
142-0308-406
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Bulkhead Jack (3-piece) Solder or Crimp Captivated Contact
VSWR & FREQ. RANGE
GOLD PLATED
NICKEL PLATED
RG-178/U, 196
1.20 + .025 f (GHz) 0-12.4 GHz
142-0302-431
142-0302-436
“A”
.285 (7.24)
RG-161/U, 174,188, 316
CABLE TYPE
1.15 + .02 f (GHz) 0-12.4 GHz
142-0303-411
142-0303-416
.385 (9.78)
RG-188 DS, RG-316 DS
1.15 + .02 f (GHz)
142-0304-411
142-0304-416
.385 (9.78)
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
1.15 + .01 f (GHz) 0-12.4 GHz
142-0307-411
142-0307-416
1.15 + .01 f (GHz)
142-0308-411
142-0308-416
.385 (9.78)
.385 (9.78)
RG-179/U, 187
N/A
142-0333-411
142-0333-416
.385 (9.78)
0-12.4 GHz
0-12.4 GHz
Straight Crimp Type Bulkhead Jack (3-piece) Captivated Contact - Low Loss Cable
GOLD PLATED
NICKEL PLATED
“A”
0-12.4 GHz
142-0303-411
142-0303-416
.385 (9.78)
LMR-195, HPF-195, RF-195 1.15 + .01f (GHz) 0-12.4 GHz
LMR-200, HPF-200, RF-200 1.10 + .03f (GHz) 0-12.4 GHz
142-0307-411
142-0307-416
.385 (9.78)
142-0339-401
142-0339-406
.545 (13.84)
LMR-240, HPF-240, RF-240 1.10 + .03f (GHz)
142-0335-401
142-0335-406
.545 (13.84)
CABLE TYPE
VSWR & FREQ. RANGE
LMR-100, HPF-100, RF-100 1.15 + .02f (GHz)
0-12.4 GHz
NEW
Straight Clamp Type Plug - Captivated Contact
CABLE TYPE
VSWR & FREQ. RANGE
GOLD PLATED
NICKEL PLATED
“A”
RG-178/U, 196
1.20 + .025 f (GHz) 0-12.4 GHz
142-0202-011
142-0202-016
.816 (20.73)
RG-161/U, 174, 188, 316
1.15 + .02 f (GHz) 0-12.4 GHz
142-0203-011
142-0203-016
.816 (20.73)
RG-58/U, 141, 303, 55, 142, 223, 400
1.15 + .01 f (GHz) 0-12.4 GHz
142-0207-011
142-0207-016
.895 (22.73)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
7
SMA - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Clamp Type Plug - Captivated Contact
CABLE TYPE
VSWR & FREQ. RANGE
RG-178/U, 196
1.20 + .03 f (GHz) 0-12.4 GHz
“A”
“B”
142-0202-101
142-0202-106
.569 (14.45)
.428 (10.81)
.574 (14.58)
.686 (17.42)
.433 (11.00)
GOLD PLATED NICKEL PLATED
RG-161/U, 174, 188, 316
1.15 + .03 f (GHz) 0-12.4 GHz
142-0203-101
142-0203-106
RG-58/U, 141, 303, 55, 142, 223, 400
1.15 + .02 f (GHz) 0-12.4 GHz
142-0207-101
142-0207-106
.545 (13.84)
Straight Clamp Type Jack - Captivated Contact
CABLE TYPE
RG-178/U, 196
VSWR & FREQ. RANGE
1.20 + .025 f (GHz) 0-12.4 GHz
GOLD PLATED NICKEL PLATED
142-0102-016
142-0102-011
“A”
.745 (18.92)
RG-161/U, 174, 188, 316
1.15 + .02 f (GHz) 0-12.4 GHz
142-0103-011
142-0103-016
.780 (19.81)
RG-58/U, 141, 303, 55, 142, 223, 400
1.15 + .01 f (GHz) 0-12.4 GHz
142-0107-011
142-0107-016
.824 (20.93)
8
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Clamp Type Bulkhead Jack Captivated Contact
CABLE TYPE
VSWR & FREQ. RANGE
RG-178/U, 196
1.20 + .025 f (GHz) 0-12.4 GHz
RG-161/U, 174, 188, 316
RG-58/U, 141, 303, 55, 142, 223, 400
GOLD PLATED NICKEL PLATED
“A”
142-0102-401
142-0102-406
.452 (11.48)
0-12.4 GHz
142-0103-401
142-0103-406
.487 (12.37)
1.15 + .01 f (GHz) 0-12.4 GHz
142-0107-401
142-0107-406
.531 (13.49)
1.15 + .02 f (GHz)
Rear Mount Bulkhead Plug Antenna Connector
CABLE TYPE
RG-178/U, .047 Semi-Rigid
* With Nickel mounting nut.
VSWR & FREQ. RANGE
VSWR: N/A 0-4 GHz
GOLD PLATED*
142-0801-421*
Mates with SMA Jack Antenna Interface.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
9
SMA - 50 Ohm Connectors
In-Series Adapters
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
142-0801-861 6
142-0801-866 6
142-0901-401 4
142-0901-406 4
142-0901-801 4
142-0901-806 4
142-0901-811 5
142-0901-816 5
142-0901-821 5
142-0901-826 5
142-0901-921 5
142-0901-931 6
142-0901-941 6
Dummy Load Plug 6
Jack to Bulkhead Jack 4
Jack to Jack 4
Plug to Jack 5
Plug to Plug 5
Right Angle SMA Jack to SMA Jack 5
Right Angle SMA Jack to SMA Plug 6
Right Angle SMA Plug to SMA Plug 6
Specifications 1, 2, 3
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range:
Dummy loads .......................................................................... 0-2 GHz
Flexible cable connectors ................................................... 0-12.4 GHz
Uncabled receptacles, RA semi-rigid and adapters ........... 0-18.0 GHz
Straight semi-rigid cable connectors and
field replaceable connectors ............................................... 0-26.5 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors Cabled Connectors
RG-178 cable .............................. 1.20 + .025f
1.20 + .03f
RG-316, LMR-100 cable .............. 1.15 + .02f
1.15 + .03f
RG-58, LMR-195 cable ................ 1.15 + .01f
1.15 + .02f
RG-142 cable ............................... 1.15 + .01f
1.15 + .02f
LMR-200, LMR-240 cable ............ 1.10 + .03f
1.10 + .06f
.086 semi-rigid ............................ 1.07 + .008f
1.18 + .015f
.141 semi-rigid (w/contact) .......... 1.05 + .008f
1.15 + .015f
.141 semi-rigid (w/o contact) ...... 1.035 + .005f
Jack-bulkhead jack adapter and plug-plug adapter ................. 1.05 + .01f
Jack-jack adapter and plug-jack adapter ............................... 1.05 + .005f
Uncabled receptacles, dummy loads .................................................. N/A
Field replaceable (see page 59) ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level 70K Feet
RG-178 ...................................................................... 170
45
RG-316; LMR-100, 195, 200 ..................................... 250
65
RG-58, RG-142, LMR-240, .086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact ... 335
85
.141 semi-rigid with contact and adapters ................. 500
125
Dummy loads ................................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ................................................................... 500
Connectors for RG-316; LMR-100, 195, 200 .................................. 750
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
field replaceable, uncabled receptacles ...................................... 1000
Connectors for .141 semi-rigid with contact and adapters ............ 1500
Connectors for .141 semi-rigid w/o contact, dummy loads .............. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ................................................................... 125
Connectors for RG-316; LMR-100, 195, 200 .................................. 190
Connectors for RG-58, RG-142, LMR-240, 086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact .......................... 250
Connectors for .141 semi-rigid with contact and adapters .............. 375
Dummy loads ...................................................................................... N/A
Insertion Loss: (dB maximum)
Straight flexible cable connectors
and adapters ...................... 0.06 f (GHz), tested at 6 GHz
Right angle flexible cable
connectors ......................... 0.15 f (GHz), tested at 6 GHz
Straight semi-rigid cable
connectors with contact ..... 0.03 f (GHz), tested at 10 GHz
Right angle semi-rigid cable
connectors ......................... 0.05 f (GHz), tested at 10 GHz
Straight semi-rigid cable
connectors w/o contact ...... 0.03 f (GHz), tested at 16 GHz
Straight low loss flexible
cable connectors ................ 0.06 f (GHz), tested at 1 GHz
Right Angle low loss flexible
cable connectors ................ 0.15 f (GHz), tested at 1 GHz
Uncabled receptacles, field replaceable, dummy loads ..................... N/A
Insulation Resistance: 5000 megohms minimum
Contact Resistance: (milliohms maximum) Initial After Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ........................... 3.0*
4.0*
Center contact (right angle cabled
connectors and adapters) .............................. 4.0
6.0
Field replaceable connectors ........................ 6.0
8.0
Outer contact (all connectors) ........................... 2.0
N/A
Braid to body (gold plated connectors) ............. 0.5
N/A
Braid to body (nickel plated connectors) ........... 5.0
N/A
*N/A where the cable center conductor is used as a contact
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors, adapters and .141 semi-rigid
connectors w/o contact ............................................................. -60 dB
Field replaceable w/o EMI gasket .............................................. -70 dB
.086 semi-rigid connectors and .141 semi-rigid connectors
with contact, and field replaceable with EMI Gasket ................ -90 dB
Two-way adapters ...................................................................... -90 dB
Uncabled receptacles, dummy loads .............................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 ................................................................... 335
Connectors for RG-316; LMR-100, 195, 200 .................................. 500
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
.141 semi-rigid cable w/o contact, uncabled receptacles .............. 670
Connectors for .141 semi-rigid with contact and adapters ............ 1000
Power Rating (Dummy Load): 0.5 watt @ + 25oC, derated to 0.25 watt @
+125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds minimum
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60 pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*(lbs) Torque (in-oz)
Connectors for RG-178 ............................ 10
N/A
Connectors for RG-316, LMR-100 ........... 20
N/A
Connectors for LMR-195, 200 .................. 30
N/A
Connectors for RG-58, LMR-240 ............. 40
N/A
Connectors for RG-142 ............................ 45
N/A
Connectors for .086 semi-rigid ................. 30
16
Connectors for .141 semi-rigid ................. 60
55
*Or cable breaking strength whichever is less.
Durability: 500 cycles minimum
100 cycles minimum for .141 semi-rigid connectors w/o contact
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
†Avoid user injury due to misapplication. See safety advisory definitions on page 2.
2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or Tefzel per ASTM D 3159
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Seal Rings: Silicone rubber per ZZ-R-765
EMI Gaskets: Conductive silicone rubber per MIL-G-83528, Type M
* All gold plated parts include a .00005" min. nickel underplate barrier layer.
Mating Engagement for SMA Series per MIL-C-39012
JACK
PLUG
PLUG
JACK
NOTES
1. ID OF CONTACT TO MEET VSWR, CONTACT RESISTANCE AND INSERTION WITHDRAWAL FORCES
WHEN MATED WITH DIA .0355-.0370 MALE PIN.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMA - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Panel Mount
142-0701-621 4
142-0701-626 4
142-0701-631 4
142-0701-636 4
142-0701-701 7
142-0701-706 7
142-1701-011 5
142-1701-016 5
142-1701-031 4
142-1701-036 4
142-1701-041 5
142-1701-046 5
142-1701-121 5
142-1701-126 5
142-1701-131 4
142-1701-136 4
142-1701-191 7
142-1701-196 7
142-1701-201 6
142-1701-206 6
142-1711-001 7
142-1711-006 7
142-1711-011 8
142-1711-016 8
142-1711-021 8
142-1711-026 8
142-1711-031 8
142-1711-036 8
142-1801-031 6
142-1801-036 6
142-1801-041 6
142-1801-046 6
2-Hole Flange Mount Jack Receptacle - Extended Dielectric 4, 6
2-Hole Flange Mount Jack Receptacle - Flush Dielectric 4
2-Hole Flange Mount Plug Receptacle - Extended Dielectric 6
2-Hole RA Flange Mount Jack Receptacle - Extended Dielectric 8
2-Hole RA Flange Mount Jack Receptacle -Extended Dielectric 8
2-Hole RA Flange Mount Jack Receptacle -Extended Dielectric 8
4-Hole Flange Mount Jack Receptacle - Extended Dielectric 5
4-Hole Flange Mount Jack Receptacle - Flush Dielectric 4
4-Hole Flange Mount Jack Receptacle -Extended Dielectric 7
4-Hole Flange Mount Plug Receptacle - Extended Dielectric 6
4-Hole RA Flange Mount Jack Receptacle - Extended Dielectric 7
4-Hole Right Angle Flange Mount Jack Receptacle 7
Specifications 2, 3
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range:
Dummy loads .......................................................................... 0-2 GHz
Flexible cable connectors ................................................... 0-12.4 GHz
Uncabled receptacles, RA semi-rigid and adapters ........... 0-18.0 GHz
Straight semi-rigid cable connectors and
field replaceable connectors ............................................... 0-26.5 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors Cabled Connectors
RG-178 cable .............................. 1.20 + .025f
1.20 + .03f
RG-316, LMR-100 cable .............. 1.15 + .02f
1.15 + .03f
RG-58, LMR-195 cable ................ 1.15 + .01f
1.15 + .02f
RG-142 cable ............................... 1.15 + .01f
1.15 + .02f
LMR-200, LMR-240 cable ............ 1.10 + .03f
1.10 + .06f
.086 semi-rigid ............................ 1.07 + .008f
1.18 + .015f
.141 semi-rigid (w/contact) .......... 1.05 + .008f
1.15 + .015f
.141 semi-rigid (w/o contact) ...... 1.035 + .005f
Jack-bulkhead jack adapter and plug-plug adapter ................. 1.05 + .01f
Jack-jack adapter and plug-jack adapter ............................... 1.05 + .005f
Uncabled receptacles, dummy loads .................................................. N/A
Field replaceable (see page 59) ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level 70K Feet
RG-178 ...................................................................... 170
45
RG-316; LMR-100, 195, 200 ..................................... 250
65
RG-58, RG-142, LMR-240, .086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact ... 335
85
.141 semi-rigid with contact and adapters ................. 500
125
Dummy loads ................................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ................................................................... 500
Connectors for RG-316; LMR-100, 195, 200 .................................. 750
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
field replaceable, uncabled receptacles ...................................... 1000
Connectors for .141 semi-rigid with contact and adapters ............ 1500
Connectors for .141 semi-rigid w/o contact, dummy loads .............. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ................................................................... 125
Connectors for RG-316; LMR-100, 195, 200 .................................. 190
Connectors for RG-58, RG-142, LMR-240, 086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact .......................... 250
Connectors for .141 semi-rigid with contact and adapters .............. 375
Dummy loads ...................................................................................... N/A
Insertion Loss: (dB maximum)
Straight flexible cable connectors
and adapters ...................... 0.06
f (GHz), tested at 6 GHz
Right angle flexible cable
connectors ......................... 0.15
f (GHz), tested at 6 GHz
Straight semi-rigid cable
connectors with contact ..... 0.03
f (GHz), tested at 10 GHz
Right angle semi-rigid cable
connectors ......................... 0.05
f (GHz), tested at 10 GHz
Straight semi-rigid cable
connectors w/o contact ...... 0.03
f (GHz), tested at 16 GHz
Straight low loss flexible
cable connectors ................ 0.06
f (GHz), tested at 1 GHz
Right Angle low loss flexible
cable connectors ................ 0.15
f (GHz), tested at 1 GHz
Uncabled receptacles, field replaceable, dummy loads ..................... N/A
Insulation Resistance: 5000 megohms minimum
Contact Resistance: (milliohms maximum) Initial After Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ........................... 3.0*
4.0*
Center contact (right angle cabled
connectors and adapters) .............................. 4.0
6.0
Field replaceable connectors ........................ 6.0
8.0
Outer contact (all connectors) ........................... 2.0
N/A
Braid to body (gold plated connectors) ............. 0.5
N/A
Braid to body (nickel plated connectors) ........... 5.0
N/A
*N/A where the cable center conductor is used as a contact
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors, adapters and .141 semi-rigid
connectors w/o contact ............................................................. -60 dB
Field replaceable w/o EMI gasket .............................................. -70 dB
.086 semi-rigid connectors and .141 semi-rigid connectors
with contact, and field replaceable with EMI Gasket ................ -90 dB
Two-way adapters ...................................................................... -90 dB
Uncabled receptacles, dummy loads .............................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 ................................................................... 335
Connectors for RG-316; LMR-100, 195, 200 .................................. 500
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
.141 semi-rigid cable w/o contact, uncabled receptacles .............. 670
Connectors for .141 semi-rigid with contact and adapters ............ 1000
Power Rating (Dummy Load): 0.5 watt @ + 25oC, derated to 0.25 watt @
+125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds minimum
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60 pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*(lbs) Torque (in-oz)
Connectors for RG-178 ............................ 10
N/A
Connectors for RG-316, LMR-100 ........... 20
N/A
Connectors for LMR-195, 200 .................. 30
N/A
Connectors for RG-58, LMR-240 ............. 40
N/A
Connectors for RG-142 ............................ 45
N/A
Connectors for .086 semi-rigid ................. 30
16
Connectors for .141 semi-rigid ................. 60
55
*Or cable breaking strength whichever is less.
Durability: 500 cycles minimum
100 cycles minimum for .141 semi-rigid connectors w/o contact
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
†Avoid user injury due to misapplication. See safety advisory definitions on page 2.
2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or Tefzel per ASTM D 3159
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Seal Rings: Silicone rubber per ZZ-R-765
EMI Gaskets: Conductive silicone rubber per MIL-G-83528, Type M
* All gold plated parts include a .00005" min. nickel underplate barrier layer.
Mating Engagement for SMA Series per MIL-C-39012
JACK
PLUG
PLUG
JACK
NOTES
1. ID OF CONTACT TO MEET VSWR, CONTACT RESISTANCE AND INSERTION WITHDRAWAL FORCES
WHEN MATED WITH DIA .0355-.0370 MALE PIN.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMA - 50 Ohm Connectors
Panel Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
2-Hole Flange Mount Jack Receptacle - Flush Dielectric
VSWR & FREQ. RANGE
VSWR: N/A
0-18 GHz
GOLD PLATED
NICKEL PLATED
142-0701-621
142-0701-626
4-Hole Flange Mount Jack Receptacle - Flush Dielectric
VSWR & FREQ. RANGE
VSWR: N/A
0-18 GHz
GOLD PLATED
NICKEL PLATED
142-0701-631
142-0701-636
2-Hole Flange Mount Jack Receptacle - Extended Dielectric
VSWR &
FREQ. RANGE
PRODUCT
SERIES
VSWR: 1.15 + .02 f (GHz)
0-18 GHz
Brass
4
GOLD
PLATED
NICKEL
PLATED
"A"
"B"
142-1701-131
142-1701-136
.705 (17.91)
.590 (14.99)
142-1701-031
142-1701-036
.240 (6.10)
.180 (4.57)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Panel Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
4-Hole Flange Mount Jack Receptacle Extended Dielectric
VSWR &
FREQ. RANGE
PRODUCT
SERIES
VSWR: 1.15 + .02 f (GHz)
0-18 GHz
Brass
GOLD
PLATED
NICKEL
PLATED
"A"
"B"
142-1701-121
142-1701-126
.705 (17.91)
.590 (14.99)
142-1701-041
142-1701-046
.190 (4.83)
.095 (2.41)
4-Hole Flange Mount Jack Receptacle Extended Dielectric
VSWR & FREQ. RANGE
VSWR: 1.15 + .02 f (GHz)
0-18 GHz
GOLD PLATED
NICKEL PLATED
142-1701-011
142-1701-016
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMA - 50 Ohm Connectors
Panel Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
2-Hole Flange Mount Plug Receptacle Extended Dielectric
VSWR & FREQ. RANGE
VSWR: 1.15 + .02 f (GHz)
0-18 GHz
GOLD PLATED
NICKEL PLATED
142-1801-041
142-1801-046
4-Hole Flange Mount Plug Receptacle Extended Dielectric
VSWR & FREQ. RANGE
VSWR: 1.15 + .02 f (GHz)
0-18 GHz
GOLD PLATED
NICKEL PLATED
142-1801-031
142-1801-036
2-Hole Flange Mount Jack Receptacle Extended Dielectric
6
GOLD PLATED
NICKEL PLATED
142-1701-201
142-1701-206
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Panel Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
4-Hole Flange Mount Jack Receptacle Extended Dielectric
GOLD PLATED
NICKEL PLATED
142-1701-191
142-1701-196
4-Hole Right Angle Flange Mount Jack Receptacle
VSWR & FREQ. RANGE
VSWR: N/A
0-18 GHz
GOLD PLATED
NICKEL PLATED
142-0701-701
142-0701-706
4-Hole RA Flange Mount Jack Receptacle Extended Dielectric
GOLD PLATED NICKEL PLATED
142-1711-001
142-1711-006
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
7
SMA - 50 Ohm Connectors
Panel Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
2-Hole RA Flange Mount Jack Receptacle Extended Dielectric 90O Orientation
GOLD PLATED NICKEL PLATED
142-1711-011
142-1711-016
2-Hole RA Flange Mount Jack Receptacle Extended Dielectric +45o Orientation
GOLD PLATED NICKEL PLATED
142-1711-021
142-1711-026
2-Hole RA Flange Mount Jack Receptacle Extended Dielectric -45o Orientation
GOLD PLATED NICKEL PLATED
142-1711-031
8
142-1711-036
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Spark Pluts
142-0701-481 6
142-0701-486 6
142-1721-001 5
142-1721-006 5
142-1721-011 5
142-1721-016 5
142-1721-021 6
142-1721-026 6
142-1721-031 6
142-1721-036 6
142-1721-041 6
142-1721-046 6
142-1721-051 6
142-1721-056 6
142-1731-001 4
142-1731-006 4
142-1731-011 4
142-1731-016 4
142-1731-021 4
142-1731-026 4
142-1731-031 4
142-1731-036 4
142-1731-041 5
142-1731-046 5
Jack Receptacle - Knurl Mount*Extended Dielectric 6
Jack Receptacle - Knurl Mount*Round Contact 5, 6
Jack Receptacle - Knurl Mount*Solder Cup Contact 6
Jack Receptacle - Knurl Mount*Tab Contact 5
Jack Receptacle - Thread Mount with HardwareExtend Dielectric 4
Jack Receptacle - Thread MountExtended Dielectric 4
Jack Receptacle - Thread MountField Replaceable 4
Jack Receptacle - Thread MountNail Head Contact 5
Specifications 2, 3
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range:
Dummy loads .......................................................................... 0-2 GHz
Flexible cable connectors ................................................... 0-12.4 GHz
Uncabled receptacles, RA semi-rigid and adapters ........... 0-18.0 GHz
Straight semi-rigid cable connectors and
field replaceable connectors ............................................... 0-26.5 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors Cabled Connectors
RG-178 cable .............................. 1.20 + .025f
1.20 + .03f
RG-316, LMR-100 cable .............. 1.15 + .02f
1.15 + .03f
RG-58, LMR-195 cable ................ 1.15 + .01f
1.15 + .02f
RG-142 cable ............................... 1.15 + .01f
1.15 + .02f
LMR-200, LMR-240 cable ............ 1.10 + .03f
1.10 + .06f
.086 semi-rigid ............................ 1.07 + .008f
1.18 + .015f
.141 semi-rigid (w/contact) .......... 1.05 + .008f
1.15 + .015f
.141 semi-rigid (w/o contact) ...... 1.035 + .005f
Jack-bulkhead jack adapter and plug-plug adapter ................. 1.05 + .01f
Jack-jack adapter and plug-jack adapter ............................... 1.05 + .005f
Uncabled receptacles, dummy loads .................................................. N/A
Field replaceable (see page 59) ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level 70K Feet
RG-178 ...................................................................... 170
45
RG-316; LMR-100, 195, 200 ..................................... 250
65
RG-58, RG-142, LMR-240, .086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact ... 335
85
.141 semi-rigid with contact and adapters ................. 500
125
Dummy loads ................................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ................................................................... 500
Connectors for RG-316; LMR-100, 195, 200 .................................. 750
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
field replaceable, uncabled receptacles ...................................... 1000
Connectors for .141 semi-rigid with contact and adapters ............ 1500
Connectors for .141 semi-rigid w/o contact, dummy loads .............. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ................................................................... 125
Connectors for RG-316; LMR-100, 195, 200 .................................. 190
Connectors for RG-58, RG-142, LMR-240, 086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact .......................... 250
Connectors for .141 semi-rigid with contact and adapters .............. 375
Dummy loads ...................................................................................... N/A
Insertion Loss: (dB maximum)
Straight flexible cable connectors
and adapters ...................... 0.06
f (GHz), tested at 6 GHz
Right angle flexible cable
connectors ......................... 0.15
f (GHz), tested at 6 GHz
Straight semi-rigid cable
connectors with contact ..... 0.03
f (GHz), tested at 10 GHz
Right angle semi-rigid cable
connectors ......................... 0.05
f (GHz), tested at 10 GHz
Straight semi-rigid cable
connectors w/o contact ...... 0.03
f (GHz), tested at 16 GHz
Straight low loss flexible
cable connectors ................ 0.06
f (GHz), tested at 1 GHz
Right Angle low loss flexible
cable connectors ................ 0.15
f (GHz), tested at 1 GHz
Uncabled receptacles, field replaceable, dummy loads ..................... N/A
Insulation Resistance: 5000 megohms minimum
Contact Resistance: (milliohms maximum) Initial After Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ........................... 3.0*
4.0*
Center contact (right angle cabled
connectors and adapters) .............................. 4.0
6.0
Field replaceable connectors ........................ 6.0
8.0
Outer contact (all connectors) ........................... 2.0
N/A
Braid to body (gold plated connectors) ............. 0.5
N/A
Braid to body (nickel plated connectors) ........... 5.0
N/A
*N/A where the cable center conductor is used as a contact
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors, adapters and .141 semi-rigid
connectors w/o contact ............................................................. -60 dB
Field replaceable w/o EMI gasket .............................................. -70 dB
.086 semi-rigid connectors and .141 semi-rigid connectors
with contact, and field replaceable with EMI Gasket ................ -90 dB
Two-way adapters ...................................................................... -90 dB
Uncabled receptacles, dummy loads .............................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 ................................................................... 335
Connectors for RG-316; LMR-100, 195, 200 .................................. 500
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
.141 semi-rigid cable w/o contact, uncabled receptacles .............. 670
Connectors for .141 semi-rigid with contact and adapters ............ 1000
Power Rating (Dummy Load): 0.5 watt @ + 25oC, derated to 0.25 watt @
+125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds minimum
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60 pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*(lbs) Torque (in-oz)
Connectors for RG-178 ............................ 10
N/A
Connectors for RG-316, LMR-100 ........... 20
N/A
Connectors for LMR-195, 200 .................. 30
N/A
Connectors for RG-58, LMR-240 ............. 40
N/A
Connectors for RG-142 ............................ 45
N/A
Connectors for .086 semi-rigid ................. 30
16
Connectors for .141 semi-rigid ................. 60
55
*Or cable breaking strength whichever is less.
Durability: 500 cycles minimum
100 cycles minimum for .141 semi-rigid connectors w/o contact
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
†Avoid user injury due to misapplication. See safety advisory definitions on page 2.
2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or Tefzel per ASTM D 3159
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Seal Rings: Silicone rubber per ZZ-R-765
EMI Gaskets: Conductive silicone rubber per MIL-G-83528, Type M
* All gold plated parts include a .00005" min. nickel underplate barrier layer.
Mating Engagement for SMA Series per MIL-C-39012
JACK
PLUG
PLUG
JACK
NOTES
1. ID OF CONTACT TO MEET VSWR, CONTACT RESISTANCE AND INSERTION WITHDRAWAL FORCES
WHEN MATED WITH DIA .0355-.0370 MALE PIN.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMA - 50 Ohm Connectors
Spark Plugs
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Jack Receptacle - Thread Mount
Field Replaceable
ACCEPTS PIN SIZE
GOLD PLATED
142-1731-001
NICKEL PLATED
.020 (0.51)
.036 (0.91)
142-1731-011
142-1731-016
142-1731-006
Jack Receptacle - Thread Mount
Extended Dielectric (Non-hermetic)
GOLD PLATED
NICKEL PLATED
142-1731-021
142-1731-026
Jack Receptacle - Thread Mount with Hardware
Extended Dielectric Bulkhead
4
GOLD PLATED
NICKEL PLATED
142-1731-031
142-1731-036
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Spark Plugs
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Jack Receptacle - Thread Mount
Nail Head Contact
GOLD PLATED
NICKEL PLATED
142-1731-041
142-1731-046
Jack Receptacle - Knurl Mount*
Tab Contact
GOLD PLATED
NICKEL PLATED
142-1721-001
142-1721-006
* Not intended for use in materials harder than Rockwell B82
Assembly tooling available - contact factory.
Jack Receptacle - Knurl Mount*
Round Contact
GOLD PLATED
NICKEL PLATED
142-1721-011
142-1721-016
* Not intended for use in materials harder than Rockwell B82
Assembly tooling available - contact factory.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMA - 50 Ohm Connectors
Spark Plugs
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Jack Receptacle - Knurl Mount*
Round Contact
GOLD PLATED
NICKEL PLATED
142-1721-021
142-1721-026
* Not intended for use in materials harder than Rockwell B82
Assembly tooling available - contact factory.
Jack Receptacle - Knurl Mount*
Solder Cup Contact
GOLD PLATED
NICKEL PLATED
142-0701-481
142-0701-486
* Not intended for use in materials harder than Rockwell B82
Assembly tooling available - contact factory.
Jack Receptacle - Knurl Mount*
Extended Dielectric
6
“A”
“B”
GOLD PLATED
.190 (4.83)
NICKEL PLATED
.095 (2.41)
142-1721-031
142-1721-036
.240 (6.10)
.180 (4.57)
142-1721-041
142-1721-046
.705 (17.91)
.590 (14.99)
142-1721-051
142-1721-056
* Not intended for use in materials harder than Rockwell B82
Assembly tooling available - contact factory.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Field Replaceable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
142-1000-001
142-1000-003
142-1000-004
142-1000-012
142-1000-018
142-1000-022
142-1701-501
142-1701-506
142-1701-511
142-1701-516
142-1701-521
142-1701-526
142-1701-531
142-1701-536
142-1701-541
142-1701-546
142-1701-551
142-1701-556
142-1701-561
142-1701-566
142-1701-571
142-1701-576
142-1701-581
142-1701-586
142-1701-591
142-1701-596
142-1701-601
142-1701-606
142-1701-611
142-1701-616
142-1701-621
142-1701-626
142-1701-631
142-1701-636
142-1701-641
142-1701-646
142-1711-511
142-1711-516
142-1711-521
142-1711-526
142-1711-531
142-1711-536
10
10
10
11
11
11
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
5
5
5
5
5
5
5
5
5
5
7
7
7
7
7
7
142-1801-501 8
142-1801-506 8
142-1801-511 8
142-1801-516 8
142-1801-521 8
142-1801-526 8
142-1801-531 9
142-1801-536 9
142-1801-541 9
142-1801-546 9
142-1801-551 9
142-1801-556 9
142-1801-561 9
142-1801-566 9
142-1801-571 9
142-1801-576 9
142-1801-581 9
142-1801-586 9
142-1801-591 9
142-1801-596 9
142-1801-601 8
142-1801-606 8
142-1801-611 8
142-1801-616 8
142-1801-621 8
142-1801-626 8
142-1801-631 8
142-1801-636 8
142-1801-641 8
142-1801-646 8
2-Hole Flange Mount Jack Receptacle 5
2-Hole Flange Mount Plug Receptacle 8
4-Hole Flange Mount Jack Receptacle 6, 7
4-Hole Flange Mount Plug Receptacle 8, 9
4-Hole RA Flange Mount Jack Receptacle 7
4-Hole Right Angle Flange Mount Jack Receptacle 7
Application Notes 4
Epoxy Staked Feedthrough 11
Hermetic Seal Feedthrough 10P
PC Board Feedthrough 11
Specifications 2, 3
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range:
Dummy loads .......................................................................... 0-2 GHz
Flexible cable connectors ................................................... 0-12.4 GHz
Uncabled receptacles, RA semi-rigid and adapters ........... 0-18.0 GHz
Straight semi-rigid cable connectors and
field replaceable connectors ............................................... 0-26.5 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors Cabled Connectors
RG-178 cable .............................. 1.20 + .025f
1.20 + .03f
RG-316, LMR-100 cable .............. 1.15 + .02f
1.15 + .03f
RG-58, LMR-195 cable ................ 1.15 + .01f
1.15 + .02f
RG-142 cable ............................... 1.15 + .01f
1.15 + .02f
LMR-200, LMR-240 cable ............ 1.10 + .03f
1.10 + .06f
.086 semi-rigid ............................ 1.07 + .008f
1.18 + .015f
.141 semi-rigid (w/contact) .......... 1.05 + .008f
1.15 + .015f
.141 semi-rigid (w/o contact) ...... 1.035 + .005f
Jack-bulkhead jack adapter and plug-plug adapter ................. 1.05 + .01f
Jack-jack adapter and plug-jack adapter ............................... 1.05 + .005f
Uncabled receptacles, dummy loads .................................................. N/A
Field replaceable (see page 59) ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level 70K Feet
RG-178 ...................................................................... 170
45
RG-316; LMR-100, 195, 200 ..................................... 250
65
RG-58, RG-142, LMR-240, .086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact ... 335
85
.141 semi-rigid with contact and adapters ................. 500
125
Dummy loads ................................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ................................................................... 500
Connectors for RG-316; LMR-100, 195, 200 .................................. 750
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
field replaceable, uncabled receptacles ...................................... 1000
Connectors for .141 semi-rigid with contact and adapters ............ 1500
Connectors for .141 semi-rigid w/o contact, dummy loads .............. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ................................................................... 125
Connectors for RG-316; LMR-100, 195, 200 .................................. 190
Connectors for RG-58, RG-142, LMR-240, 086 semi-rigid,
uncabled receptacles, .141 semi-rigid w/o contact .......................... 250
Connectors for .141 semi-rigid with contact and adapters .............. 375
Dummy loads ...................................................................................... N/A
Insertion Loss: (dB maximum)
Straight flexible cable connectors
and adapters ...................... 0.06 f (GHz), tested at 6 GHz
Right angle flexible cable
connectors ......................... 0.15 f (GHz), tested at 6 GHz
Straight semi-rigid cable
connectors with contact ..... 0.03 f (GHz), tested at 10 GHz
Right angle semi-rigid cable
connectors ......................... 0.05 f (GHz), tested at 10 GHz
Straight semi-rigid cable
connectors w/o contact ...... 0.03 f (GHz), tested at 16 GHz
Straight low loss flexible
cable connectors ................ 0.06 f (GHz), tested at 1 GHz
Right Angle low loss flexible
cable connectors ................ 0.15 f (GHz), tested at 1 GHz
Uncabled receptacles, field replaceable, dummy loads ..................... N/A
Insulation Resistance: 5000 megohms minimum
Contact Resistance: (milliohms maximum) Initial After Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ........................... 3.0*
4.0*
Center contact (right angle cabled
connectors and adapters) .............................. 4.0
6.0
Field replaceable connectors ........................ 6.0
8.0
Outer contact (all connectors) ........................... 2.0
N/A
Braid to body (gold plated connectors) ............. 0.5
N/A
Braid to body (nickel plated connectors) ........... 5.0
N/A
*N/A where the cable center conductor is used as a contact
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors, adapters and .141 semi-rigid
connectors w/o contact ............................................................. -60 dB
Field replaceable w/o EMI gasket .............................................. -70 dB
.086 semi-rigid connectors and .141 semi-rigid connectors
with contact, and field replaceable with EMI Gasket ................ -90 dB
Two-way adapters ...................................................................... -90 dB
Uncabled receptacles, dummy loads .............................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 ................................................................... 335
Connectors for RG-316; LMR-100, 195, 200 .................................. 500
Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid,
.141 semi-rigid cable w/o contact, uncabled receptacles .............. 670
Connectors for .141 semi-rigid with contact and adapters ............ 1000
Power Rating (Dummy Load): 0.5 watt @ + 25oC, derated to 0.25 watt @
+125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMA
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds minimum
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60 pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*(lbs) Torque (in-oz)
Connectors for RG-178 ............................ 10
N/A
Connectors for RG-316, LMR-100 ........... 20
N/A
Connectors for LMR-195, 200 .................. 30
N/A
Connectors for RG-58, LMR-240 ............. 40
N/A
Connectors for RG-142 ............................ 45
N/A
Connectors for .086 semi-rigid ................. 30
16
Connectors for .141 semi-rigid ................. 60
55
*Or cable breaking strength whichever is less.
Durability: 500 cycles minimum
100 cycles minimum for .141 semi-rigid connectors w/o contact
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
†Avoid user injury due to misapplication. See safety advisory definitions on page 2.
2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204 .00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or Tefzel per ASTM D 3159
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290
Seal Rings: Silicone rubber per ZZ-R-765
EMI Gaskets: Conductive silicone rubber per MIL-G-83528, Type M
* All gold plated parts include a .00005" min. nickel underplate barrier layer.
Mating Engagement for SMA Series per MIL-C-39012
JACK
PLUG
PLUG
JACK
NOTES
1. ID OF CONTACT TO MEET VSWR, CONTACT RESISTANCE AND INSERTION WITHDRAWAL FORCES
WHEN MATED WITH DIA .0355-.0370 MALE PIN.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMA - 50 Ohm Connectors
Field Replaceable - Application Notes
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
The field replaceable style of connector is known by many names in the industry, such as MIC launcher, hermetic seal launcher, spark plug
launcher, etc. Some types, such as those known as “spark plugs”, have the hermetic seal incorporated into the connector. These types
require special welding to install and can not be replaced without destroying the hermeticity of the circuit housing. True field replaceable
connectors, such as those manufactured by Johnson Components®, are easy to install and replace. Because the hermetic seal is not
incorporated into the connector design, the connector can be removed and replaced without destroying the hermetic seal or the hermeticity
of the circuit housing.
All of the above mentioned connector types perform the same basic function - creating a transition from microstrip circuitry to a coaxial
transmission line. Whenever possible, the hermetic seal pin diameter should be chosen as close as possible to the microstrip trace width.
For optimum electrical performance, the transition from the hermetic seal to the microstrip trace must be properly compensated. Compensation involves adjusting the microstrip trace width to minimize any impedance discontinuities found in the transition area.
The plot shown below is representative of the typical return loss of an Johnson Components® field replaceable connector. To produce the
data shown below, a test fixture is created using the appropriate Johnson Components® hermetic seal. The fixture consists of a suitably
thick spacer plate with the hermetic seal mounted flush to both surfaces. Two connectors are mounted back to back around the fixture and
the VSWR of this test assembly is measured. The return loss data shown is equivalent to the square root of the measured VSWR of the
test assembly. Since the connectors tested are of identical design, it can be stated with fair accuracy that the data shown represents the
response of a single field replaceable connector and its transition to the hermetic seal.
Although Johnson Components® does not publish a VSWR specification for field replaceable connectors, typical connector VSWR can be
expected to be less than 1.1 + .01f (f in GHz). A VSWR specification is not stated because an industry standard method for testing field
replaceable connectors does not exist. The actual performance of the connector is dependent upon the application for the following
reasons:
1.
2.
3.
The choice of hermetic seal to be used by the customer is not specified by the connector manufacturer. Hermetic seals produced
by different manufacturers will not have the same electrical characteristics. For optimum electrical performance, Johnson Components® recommends the use of our standard 142-1000-001, 002, 003 and 004 hermetic seals for pin diameters of .012 (0.30), .015
(0.38), .018 (0.46) and .020 (0.51). Custom hermetic seal configurations can be quoted.
It is recommended that the hermetic seal be mounted flush with the circuit housing. Tolerance variations between the hermetic
seal and machined housing do not always guarantee an optimum transition to the connector. Some manufacturers recommend
an additional counterbore in the circuit housing to accommodate a solder washer during installation of the seal. Johnson Components® does not recommend this type of installation because if the counterbore is not completely filled with solder, electrical
discontinuities may be created.
The transition between the hermetic seal pin and the microstrip trace will affect electrical performance, as stated above. Several
different methods of hermetic seal mounting and seal pin to microstrip trace attachment are used in the industry. Johnson
Components® can not recommend one method over the other as this is dependent upon the customer’s application.
As always, quotes for non-standard field replaceable connectors and/or hermetic seals are welcome.
4
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Field Replaceable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
2-Hole Flange Mount Jack Receptacle
With EMI Gasket
ACCEPTS PIN SIZE
FREQUENCY RANGE
GOLD PLATED
142-1701-601
NICKEL PLATED
142-1701-606
0-26.5 GHz
142-1701-611
142-1701-616
0-26.5 GHz
142-1701-621
142-1701-626
.012 (0.30)
0-26.5 GHz
.015 (0.38)
.018 (0.46)
2-Hole Flange Mount Jack Receptacle
Without EMI Gasket
ACCEPTS PIN SIZE
FREQUENCY RANGE
0-26.5 GHz
GOLD PLATED
142-1701-631
NICKEL PLATED
.020 (0.51)
.036 (0.91)
0-26.5 GHz
142-1701-641
142-1701-646
142-1701-636
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMA - 50 Ohm Connectors
Field Replaceable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
4-Hole Flange Mount Jack Receptacle
With EMI Gasket
ACCEPTS
PIN SIZE
.012 (0.30)
FREQUENCY
RANGE
0-26.5 GHz
.015 (0.38)
0-26.5 GHz
142-1701-511
142-1701-516
.018 (0.46)
0-26.5 GHz
142-1701-521
142-1701-526
GOLD
PLATED
142-1701-501
NICKEL
PLATED
142-1701-506
4-Hole Flange Mount Jack Receptacle
Without EMI Gasket
ACCEPTS
PIN SIZE
.020 (0.51)
FREQUENCY
RANGE
0-26.5 GHz
GOLD
NICKEL
PLATED
PLATED
142-1701-531 142-1701-536
.036 (0.91)
0-26.5 GHz
142-1701-541 142-1701-546
4-Hole Flange Mount Jack Receptacle
With EMI Gasket
6
ACCEPTS
PIN SIZE
FREQUENCY
RANGE
.012 (0.30)
0-26.5 GHz
GOLD
PLATED
142-1701-551
NICKEL
PLATED
142-1701-556
.015 (0.38)
0-26.5 GHz
142-1701-561
142-1701-566
.018 (0.46)
0-26.5 GHz
142-1701-571
142-1701-576
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Field Replaceable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
4-Hole Flange Mount Jack Receptacle
Without EMI Gasket
ACCEPTS
PIN SIZE
FREQUENCY
RANGE
GOLD
PLATED
.020 (0.51)
0-26.5 GHz
142-1701-581
NICKEL
PLATED
142-1701-586
.036 (0.91)
0-26.5 GHz
142-1701-591
142-1701-596
4-Hole Right Angle Flange Mount Jack Receptacle
With EMI Gasket
ACCEPTS
PIN SIZE
.015 (0.38)
FREQUENCY
RANGE
.018 (0.46)
0-26.5 GHz
GOLD
PLATED
142-1711-511
NICKEL
PLATED
142-1711-516
0-26.5 GHz
142-1711-521
142-1711-526
SMA 4-Hole RA Flange Mount Jack Receptacle
Without EMI Gasket
ACCEPTS
PIN SIZE
FREQUENCY
RANGE
GOLD
PLATED
NICKEL
PLATED
.020 (0.51)
0-26.5 GHz
142-1711-531
142-1711-536
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
7
SMA - 50 Ohm Connectors
Field Replaceable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
2-Hole Flange Mount Plug Receptacle
With EMI Gasket
ACCEPTS PIN SIZE
FREQUENCY RANGE
GOLD PLATED
NICKEL PLATED
.012 (0.30)
0-26.5 GHz
142-1801-601
142-1801-606
.015 (0.38)
0-26.5 GHz
142-1801-611
142-1801-616
.018 (0.46)
0-26.5 GHz
142-1801-621
142-1801-626
2-Hole Flange Mount Plug Receptacle
Without EMI Gasket
ACCEPTS PIN SIZE
.020 (0.51)
.036 (0.91)
FREQUENCY RANGE
GOLD PLATED
NICKEL PLATED
0-26.5 GHz
142-1801-631
142-1801-636
0-26.5 GHz
142-1801-641
142-1801-646
4-Hole Flange Mount Plug Receptacle
With EMI Gasket
ACCEPTS PIN SIZE
GOLD PLATED
NICKEL PLATED
0-26.5 GHz
142-1801-501
142-1801-506
0-26.5 GHz
142-1801-511
142-1801-516
142-1801-521
142-1801-526
.015 (0.38)
0-26.5 GHz
.018 (0.46)
8
FREQUENCY RANGE
.012 (0.30)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
Field Replaceable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
4-Hole Flange Mount Plug Receptacle
Without EMI Gasket
ACCEPTS PIN SIZE
FREQUENCY RANGE
GOLD PLATED
NICKEL PLATED
.020 (0.51)
0-26.5 GHz
142-1801-531
142-1801-536
.036 (0.91)
0-26.5 GHz
142-1801-541
142-1801-546
4-Hole Flange Mount Plug Receptacle
With EMI Gasket
ACCEPTS PIN SIZE
FREQUENCY RANGE
GOLD PLATED
NICKEL PLATED
.012 (0.30)
0-26.5 GHz
142-1801-551
142-1801-556
.015 (0.38)
0-26.5 GHz
142-1801-561
142-1801-566
.018 (0.46)
0-26.5 GHz
142-1801-571
142-1801-576
4-Hole Flange Mount Plug Receptacle
Without EMI Gasket
ACCEPTS PIN SIZE
FREQUENCY RANGE
GOLD PLATED
NICKEL PLATED
.020 (0.51)
0-26.5 GHz
142-1801-581
142-1801-586
.036 (0.91)
0-26.5 GHz
142-1801-591
142-1801-596
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
9
SMA - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Field Replaceable
Hermetic Seal Feedthrough
Recommended Mounting Hole Detail
PART
NUMBER
142-1000-001
142-1000-002
142-1000-003
142-1000-004
ITEM 1
OUTER RING
Kovar
Gold pl .00005 min over
Nickel pl .000005 min.
Kovar
Gold pl .00005 min over
Nickel pl .000005 min.
Kovar
Gold pl .00005 min over
Nickel pl .000005 min.
Kovar
Gold pl .00005 min over
Nickel pl .000005 min.
ITEM 2
INSULATOR
Glass
Corning 7052
or equivalent
Glass
Corning 7070
or equivalent
Glass
Corning 7070
or equivalent
Glass
Corning 7052
or equivalent
ITEM 3
PIN
Kovar
Gold pl .00005 min over
Nickel pl .000005 min
Kovar
Gold pl .00005 min over
Nickel pl .000005 min
Kovar
Gold pl .00005 min over
Nickel pl .000005 min
Kovar
Gold pl .00005 min over
Nickel pl .000005 min
“A”
“B”
“C”
“D”
“E”
.070 (1.78)
.0625 (1.59) .180 (4.57)
.0985 (2.50)
.012 (.30)
.072 (1.83)
.0625 (1.59) .180 (4.57)
.0985 (2.50)
.015 (.38)
.072 (1.83)
.0600 (1.52) .180 (4.57)
.1100 (2.79)
.018 (.46)
.070 (1.78)
.0600 (1.52) .203 (5.16)
.1580 (4.01)
.020 (.51)
Mounting Hole Dimensions
PART
NUMBER
142-1000-001
142-1000-002
142-1000-003
142-1000-004
PIN
DIAMETER
.012 (0.30)
.015 (0.38)
.018 (0.46)
.020 (0.51)
“F”
.063 (1.60)
.063 (1.60)
.060 (1.52)
.060 (1.52)
Notes:
1. The hermetic seal should be mounted as flush as possible with the housing. Excessive recession will create
a high impedance air gap which degrades electrical performance.
2. The use of an additional counterbore to accommodate
a solder ring for seal mounting is not recommended. A
slight chamfer may be used if care is taken to completely fill the area with solder - avoid air gaps.
3. Dimensions shown are given to achieve 50 Ohms with
either air or a teflon insulator. A teflon insulator may be
helpful in supporting small pin diameters.
10
“G”
.102 (2.59)
.102 (2.59)
.114 (2.90)
.162 (4.11)
AIR
“H”
.028 (0.71)
.035 (0.89)
.042 (1.07)
.046 (1.17)
TEFLON
“H”
.039 (0.99)
.049 (1.24)
.059 (1.50)
.065 (1.65)
Electrical:
Impedance: 50 Ohms
Frequency Range: DC to 26.5 GHz
VSWR: Dependent upon application
Working Voltage: 250 Vrms max at sea level
Dielectric Withstanding Voltage: 500 Vrms min at sea
level
Insulation Resistance: 5000 Megohm min
Insertion Loss: .015F dB max (F in GHz)
Environmental:
Hermeticity: 1x10-8 cc/sec at one atmosphere
Solderability: MIL-STD-202, Method 209
Operating Temperature: -55O C to 165O C
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
Custom
Feedthroughs
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Epoxy Staked Feedthrough
Figure 1
Figure 2
PART
NUMBER
142-1000-012
142-1000-018
ITEM 1
CONTACT
Beryllium Copper
Gold pl .00005 min over
Nickel pl .000005 min over
Copper pl .00005 min
Brass
Gold pl .00005 min over
Nickel pl .000005 min over
Copper pl .00005 min
ITEM 2
INSULATOR
Teflon
ITEM 3
STAKE
Epoxy
FIGURE
1
Teflon
Epoxy
2
Specifications:
Impedance: 50 Ohms Nominal
Frequency Range: DC to 26.5 GHz
VSWR: Dependent upon application
Working Voltage: 335 Vrms max at sea level
Dielectric Withstanding Voltage: 1000 Vrms min at sea level
Insulation Resistance: 5000 Megohm min
Contact to Insulator Retention: 6 lb. min
Operating Temperature: -55O C to + 165O C
PC Board Feedthrough
PART
NUMBER
142-1000-022
ITEM 1
CONTACT (END CAP)
Brass
Gold pl .00001 min over
Nickel pl .000005 min over
Copper pl .00005 min
ITEM 2
CONTACT (CENTER)
Beryllium Copper
Gold pl .00005 min over
Nickel pl .000005 min over
Copper pl .00005 min
ITEM 3
INSULATOR
Teflon
Application:
Lower frequency feedthrough.
Solder end cap to one side of PC board.
Contact passes through board and is isolated from board
by Teflon® insulator.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
11
SMA - 50 Ohm Connectors
In-Series Adapters
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Jack to Jack
VSWR & FREQ. RANGE
1.05 + .005 f (GHz)
0-18 GHz
GOLD PLATED
NICKEL PLATED
142-0901-801
142-0901-806
Jack to Bulkhead Jack
VSWR & FREQ. RANGE
1.05 + .01 f (GHz)
0-18 GHz
GOLD PLATED
NICKEL PLATED
142-0901-401
142-0901-406
Mounting Hole layout Figure 1 page 174.
4
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMA - 50 Ohm Connectors
In-Series Adapters
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Plug to Plug
VSWR & FREQ. RANGE
1.05 + .01 f (GHz)
0-18 GHz
GOLD PLATED
NICKEL PLATED
142-0901-811
142-0901-816
GOLD PLATED
NICKEL PLATED
142-0901-821
142-0901-826
Plug to Jack
VSWR & FREQ. RANGE
1.05 + .005 f (GHz)
0-18 GHz
Right Angle SMA Jack to SMA Jack
VSWR & FREQ. RANGE
GOLD PLATED
1.035 +.02f (GHz) 0-18 GHz
142-0901-921
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMA - 50 Ohm Connectors
In-Series Adapters and Dummy Loads
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle SMA Plug to SMA Plug
VSWR & FREQ. RANGE
GOLD PLATED
1.035 +.02f (GHz) 0-14 GHz
142-0901-931
Right Angle SMA Jack to SMA Plug
VSWR & FREQ. RANGE
GOLD PLATED
1.035 +.02f (GHz) 0-18 GHz
142-0901-941
Dummy Load Plug
6
FREQ. RANGE
GOLD PLATED
NICKEL PLATED
RESISTANCE
0-2 GHz
142-0801-861
142-0801-866
50 Ohms
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
SMB Connectors
Johnson Components® SMB connectors meet or exceed
SMB Cabled Connectors
all applicable requirements of the MIL-C-39012 coaxial
connector specification. SMB connectors utilize
a self centering retention spring which allows for snap-on
mating.
Johnson Components' SMB Straight Cable Plugs and
Jacks have a unique 2-piece design which means the
SMB PC Mount Connectors
center contact is captivated in the body. The contact is
pre-assembled into the body at our factory. As a result,
you don't have to rely on the crimp sleeve alone to
maintain contact retention.
These SMBs are now available with crimpable contacts ~
providing our customers the most economical
SMB Bulkhead and Panel Mount Connectors
assembly in the industry ~ without sacrificing
performance. The plugs are available with gold or nickel
plated die-cast bodies, which makes our SMBs not only
economical to assemble but also very economical to buy.
Hand and pneumatic crimp tools are available whether
SMB In-Series Adapters
you are assembling a few cable assemblies or hundreds.
and Loads
Superior performance, easy to assemble and economically
priced ~ all great reasons to use
Johnson Components® SMB connectors.
Johnson Components® SMB connectors are available in
SMB Mini 75 Ohm Connectors
both 50 and 75 ohm impedance designs. Johnson
Components® developed the original mini-75 ohm SMB
connector and brought it to market in 1990.
These connectors are "true" 75 ohm connectors, and are
mechanically compatible with the 50 ohm versions.
The 50 ohm versions can be used up to 4 GHz, while the
SMB Mini 75 Ohm PC Mount Connectors
75 ohm versions can be used only to 2 GHz. SMB
connectors are used in applications for inter- or intraboard connections of RF or high speed digital signals.
We have designed many OEM custom connectors. Please
contact your Johnson Components® sales representative
SMB Mini 75 Ohm Adapters
with your unique requirements.
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
with your unique requirements.
SMB Mini 75 Ohm Terminations
SMB - 50 Ohm Connectors
Cabled Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
131-1402-101
131-1402-116
131-1403-001
131-1403-016
131-1403-101
131-1403-116
131-1404-001
131-1404-016
131-1404-101
131-1404-116
131-1693-101
131-1693-116
131-3302-001
131-3302-006
131-3303-001
131-3303-006
131-3303-401
131-3303-406
131-3303-501
131-3303-506
131-3304-401
131-3304-406
131-3304-501
131-3304-506
131-3402-001
131-3402-016
131-3402-101
131-3402-116
131-3403-001
131-3403-016
131-3403-101
7
7
5
5
7
7
5
5
7
7
4
4
7
7
7
7
8
8
8
8
8
8
8
8
5
5
6
6
5
5
6
131-3403-116 6
131-3403-406 6
131-3404-001 5
131-3404-016 5
131-3404-101 6
131-3404-116 6
131-3404-406 6
131-3407-001 5
131-3407-006 5
131-3407-101 6
131-3407-106 6
131-3593-001 4
131-3593-006 4
131-3593-401 4
131-3593-406 4
131-3693-001 3
131-3693-016 3
131-3693-101 3
131-3693-116 3
131-3694-401 3
131-3694-406 3
Right Angle Crimp Type Bulkhead Jack - Captivated 8
Right Angle Crimp Type Plug - Captivated Contact 6
Right Angle Crimp Type Plug - Die Cast - 7
Right Angle Solder Type Plug - Captivated Contact 3
Specifications 2
Straight Crimp Type Bulkhead Jack - 8
Straight Crimp Type Bulkhead Plug - 6
Straight Crimp Type Jack - Solder or Crimp 7
Straight Solder Type Bulkhead Plug - 3
Straight Solder Type Plug - Captivated Contact 3
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMB - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range: Connectors ...................................................... 0-4 GHz
Dummy loads .................................................. 0-1 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled
Cabled
RG-178 cable .................................................... 1.30 + .04f
1.45 + .06f
RG-316, RG-58, and .086 semi-rigid cable ....... 1.25 + .04f
1.35 + .04f
Adapters ............................................................ 1.20 + .04f
Uncabled receptacles, dummy loads ........................................................ N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-178 ....................................................... 250
60
RG-316, RG-58, .086 semi-rigid
uncabled receptacles, adapters ................ 335
85
Dummy loads .................................................................................... N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ......................................................................... 750
Connectors for RG-316, RG-58, .086 semi-rigid,
uncabled receptacles, adapters ......................................................... 1000
Dummy loads .................................................................................... N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ......................................................................... 185
Connectors for RG-316, RG-58, .086 semi-rigid ................................... 250
Uncabled receptacles, adapters, dummy loads .................................... N/A
Insertion Loss: (dB maximum, tested at 1.5 GHz)
Straight cable connectors ............................................................... 0.30 dB
Right angle cable connectors ......................................................... 0.60 dB
Uncabled receptacles, adapters and dummy loads .............................. N/A
Insulation Resistance: 1000 megohms minimum
Initial After Environmental
Contact Resistance: (milliohms maximum)
Center contact (straight cabled connectors
and uncabled receptacles) .................................. 6.0
8.0
Center contact (right angle cabled
connectors and adapters) .................................. 12.0
16.0
Outer contact (gold plated connectors) ................... 1.0
1.5
Outer contact (nickel plated connectors) ................ 2.5
3.5
Braid to body (gold plated connectors) ................... 1.0
N/A
Braid to body (nickel plated connectors) ................. 2.5
N/A
RF Leakage: (dB minimum tested at 2.5 GHz)
Cable connectors .............................................................................. -55 dB
Uncabled receptacles, adapters and dummy loads ............................... N/A
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4 and 7
MHz)✝
Connectors for RG-178 ......................................................................... 500
Connectors for RG-316, RG-58 ............................................................. 700
Uncabled receptacles and adapters ...................................................... 600
Dummy loads ........................................................................................ N/A
Power Rating (Dummy Load): 0.5 watt @ +25oC, derated to 0.25 watt @
+125o C
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMB
Engagement/Disengagment Force: 2 pounds min to 14 pounds
maximum axial force
Contact Retention: 4 lbs. min axial force (captivated contacts)
1 inch-ounce min torque (uncabled receptacles)
Cable Retention:
Axial Force* (pounds) Torque (in-oz)
Connectors for RG-178 ............................... 10
N/A
Connectors for RG-316 ............................... 20
N/A
Connectors for RG-58 ................................. 40
16
Connectors for .086 semi-rigid .................... 30
16
* or cable breaking strength whichever is less.
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS
(Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: Connectors ....................................... - 65oC to + 165oC
Dummy loads ................................... - 65oC to + 125oC
Thermal Shock: MIL-STD-202, Method 107, Condition B (N/A dummy loads)
Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads)
Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads)
Vibration: MIL-STD-202, Method 204, Condition B (N/A dummy loads)
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated** per MILG-45204 .00001 min or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003"
min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204
.00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min. or nickel
plated per QQ-N-290
Cover Rings: Phosphor Bronze per QQ-B-750, gold plated per MIL-G-45204
.00001 min. or nickel plated per QQ-N-290.
MATING ENGAGEMENT FOR SMB
SERIES PER MIL-C-39012
Jack
Plug
Notes
1. ID of contact to meet VSWR mating characteristics and connector durability when
mated with a dia .019 /0.53 male contact.
2. Must meet the force to engage and disengage when mated with mating part.
Plug
2
Jack
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMB - 50 Ohm Connectors
For Semi-Rigid Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Solder Type Plug - Captivated Contact
CABLE
TYPE
.086 Semi-Rigid
GOLD
PLATED
NICKEL
PLATED
131-3693-001 131-3693-016
Straight Solder Type Bulkhead Plug Captivated Contact
CABLE
TYPE
.141 Semi-Rigid
GOLD
PLATED
NICKEL
PLATED
131-3694-401 131-3694-406
Right Angle Solder Type Plug - Captivated Contact
CABLE
TYPE
.086 Semi-Rigid
GOLD
PLATED
NICKEL
PLATED
131-3693-101 131-3693-116
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMB - 50 Ohm Connectors
For Semi-Rigid Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Solder Type Plug - Die Cast Captivated Contact
CABLE
TYPE
.086 Semi-Rigid
GOLD
PLATED
NICKEL
PLATED
131-1693-101 131-1693-116
Straight Solder Type Jack - Captivated Contact
CABLE
TYPE
.086 Semi-Rigid
GOLD
PLATED
NICKEL
PLATED
131-3593-001 131-3593-006
Straight Bulkhead Solder Type Jack Captivated Contact
CABLE
TYPE
.086 Semi-Rigid
4
GOLD
PLATED
NICKEL
PLATED
131-3593-401 131-3593-406
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMB - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug Solder or Crimp Captivated Contact
CABLE TYPE
GOLD PLATED
131-3402-001
NICKEL PLATED
RG-161/U, 174,
179, 187, 188, 316
131-3403-001
131-3403-016
RG-316DS, 188 DS,
179 DS, 187 DS
131-3404-001
131-3404-016
RG-178/U, 196
131-3402-016
Straight Crimp Type Plug - Captivated Contact
CABLE TYPE
GOLD PLATED
NICKEL PLATED
RG-58/U, 141, 303
131-3407-001
131-3407-006
Straight Crimp Type Plug - Die Cast Solder or Crimp Captivated Contact
CABLE TYPE
GOLD PLATED
NICKEL PLATED
RG-161/U, 174, 179,
187, 188, 316
131-1403-001
131-1403-016
RG-316DS, 188 DS,
179 DS, 187 DS
131-1404-001
131-1404-016
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMB - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Bulkhead Plug Solder or Crimp Captivated Contact
CABLE TYPE
GOLD PLATED
NICKEL PLATED
RG-161/U, 174,
179, 187, 188, 316
131-3403-401
131-3403-406
RG-316DS, 188 DS,
179 DS, 187 DS
131-3404-401
131-3404-406
Right Angle Crimp Type Plug - Captivated Contact
CABLE TYPE
RG-178/U, 196
GOLD PLATED
131-3402-101
NICKEL PLATED
131-3402-116
RG-161/U, 174,
179, 187, 188, 316
131-3403-101
131-3403-116
RG-316DS, 188 DS,
179 DS, 187 DS
131-3404-101
131-3404-116
Right Angle Crimp Type Plug - Captivated Contact
CABLE TYPE
GOLD PLATED
NICKEL PLATED
RG-58/U, 141, 303
131-3407-101
131-3407-106
6
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMB - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Crimp Type Plug - Die Cast Captivated Contact
CABLE
TYPE
GOLD
PLATED
NICKEL
PLATED
RG-178/U, 196
131-1402-101 131-1402-116
RG-161/U, 174,
179, 187, 188, 316
131-1403-101 131-1403-116
RG-316DS, 188 DS, 131-1404-101 131-1404-116
179 DS, 187 DS
Straight Crimp Type Jack Solder or Crimp Captivated Contact
CABLE
TYPE
GOLD
PLATED
NICKEL
PLATED
RG-178/U, 196
131-3302-001 131-3302-006
RG-161/U, 174,
179, 187, 188, 316
131-3303-001 131-3303-006
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
7
SMB - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Bulkhead Jack Solder or Crimp Captivated Contact
CABLE
TYPE
GOLD
PLATED
RG-161/U, 174,
179, 187, 188, 316
NICKEL
PLATED
131-3303-401 131-3303-406
RG-316DS, 188 DS,
179 DS, 187 DS
131-3304-401
131-3304-406
Right Angle Crimp Type Bulkhead Jack Captivated Contact
CABLE
TYPE
8
GOLD
PLATED
NICKEL
PLATED
RG-161/U, 174,
179, 187, 188, 316
131-3303-501 131-3303-506
RG-316DS, 188 DS,
179 DS, 187 DS
131-3304-501 131-3304-506
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMB - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Alphabetical Index
SMB Connectors - 50 Ohm
Adapters ....................................................................96
Bulkhead Mount and Panel Mount ............................94
Flexible Cable ............................................................84
Mini-75 Ohm ..............................................................98
PC Mount ..................................................................88
Semi-Rigid Cable ......................................................82
Specifications ............................................................81
Terminations ..............................................................97
Other Information
Assembly Instructions .............................................136
Assembly Tools........................................................132
Cable Assembly .......................................................177
Cable Information ....................................................176
Capabilities ..............................................................131
Mounting Hole Layouts ............................................174
Numerical Index ......................................................234
Ordering Information ...................................................2
Part Number Cross Reference ................................219
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMB - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range: Connectors ...................................................... 0-4 GHz
Dummy loads .................................................. 0-1 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled
Cabled
RG-178 cable .................................................... 1.30 + .04f
1.45 + .06f
RG-316, RG-58, and .086 semi-rigid cable ....... 1.25 + .04f
1.35 + .04f
Adapters ............................................................ 1.20 + .04f
Uncabled receptacles, dummy loads ........................................................ N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-178 ....................................................... 250
60
RG-316, RG-58, .086 semi-rigid
uncabled receptacles, adapters ................ 335
85
Dummy loads .................................................................................... N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ......................................................................... 750
Connectors for RG-316, RG-58, .086 semi-rigid,
uncabled receptacles, adapters ......................................................... 1000
Dummy loads .................................................................................... N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ......................................................................... 185
Connectors for RG-316, RG-58, .086 semi-rigid ................................... 250
Uncabled receptacles, adapters, dummy loads .................................... N/A
Insertion Loss: (dB maximum, tested at 1.5 GHz)
Straight cable connectors ............................................................... 0.30 dB
Right angle cable connectors ......................................................... 0.60 dB
Uncabled receptacles, adapters and dummy loads .............................. N/A
Insulation Resistance: 1000 megohms minimum
Initial After Environmental
Contact Resistance: (milliohms maximum)
Center contact (straight cabled connectors
and uncabled receptacles) .................................. 6.0
8.0
Center contact (right angle cabled
connectors and adapters) .................................. 12.0
16.0
Outer contact (gold plated connectors) ................... 1.0
1.5
Outer contact (nickel plated connectors) ................ 2.5
3.5
Braid to body (gold plated connectors) ................... 1.0
N/A
Braid to body (nickel plated connectors) ................. 2.5
N/A
RF Leakage: (dB minimum tested at 2.5 GHz)
Cable connectors .............................................................................. -55 dB
Uncabled receptacles, adapters and dummy loads ............................... N/A
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4 and 7
MHz)✝
Connectors for RG-178 ......................................................................... 500
Connectors for RG-316, RG-58 ............................................................. 700
Uncabled receptacles and adapters ...................................................... 600
Dummy loads ........................................................................................ N/A
Power Rating (Dummy Load): 0.5 watt @ +25oC, derated to 0.25 watt @
+125o C
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMB
Engagement/Disengagment Force: 2 pounds min to 14 pounds
maximum axial force
Contact Retention: 4 lbs. min axial force (captivated contacts)
1 inch-ounce min torque (uncabled receptacles)
Cable Retention:
Axial Force* (pounds) Torque (in-oz)
Connectors for RG-178 ............................... 10
N/A
Connectors for RG-316 ............................... 20
N/A
Connectors for RG-58 ................................. 40
16
Connectors for .086 semi-rigid .................... 30
16
* or cable breaking strength whichever is less.
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS
(Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: Connectors ....................................... - 65oC to + 165oC
Dummy loads ................................... - 65oC to + 125oC
Thermal Shock: MIL-STD-202, Method 107, Condition B (N/A dummy loads)
Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads)
Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads)
Vibration: MIL-STD-202, Method 204, Condition B (N/A dummy loads)
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated** per MILG-45204 .00001 min or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003"
min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204
.00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min. or nickel
plated per QQ-N-290
Cover Rings: Phosphor Bronze per QQ-B-750, gold plated per MIL-G-45204
.00001 min. or nickel plated per QQ-N-290.
MATING ENGAGEMENT FOR SMB
SERIES PER MIL-C-39012
Jack
Plug
Notes
1. ID of contact to meet VSWR mating characteristics and connector durability when
mated with a dia .019 /0.53 male contact.
2. Must meet the force to engage and disengage when mated with mating part.
Plug
2
Jack
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMB - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Plug Receptacle
“A”
GOLD PLATED
NICKEL PLATED
.395 (10.03)
131-3801-201
131-3801-216
.500 (12.70)
131-3801-231
131-3801-236
Right Angle Plug Receptacle
GOLD PLATED
NICKEL PLATED
131-3801-301
131-3801-316
Right Angle Plug Receptacle - Die Cast
GOLD PLATED
NICKEL PLATED
131-1801-371
131-1801-376
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMB - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Jack Receptacle
LEG LENGTH
"A"
GOLD
PLATED
NICKEL
PLATED
.155 (3.94)
131-3701-201
131-3701-206
.110 (2.79)
131-3701-211
131-3701-216
IR
COMPATIBLE*
131-3701-215*
* Tin/Lead solder dipped legs for IR Reflow Compatability.
Straight Jack Receptacle - Die Cast
LEG LENGTH
"A"
GOLD
PLATED
NICKEL
PLATED
.155 (3.94)
131-1701-201
131-1701-206
.095 (2.41)
131-1701-211
131-1701-216
IR
COMPATIBLE *
131-1701-215*
* Tin/Lead solder dipped legs for IR Reflow Compatability.
Straight Jack Receptacle
4
LEG LENGTH
"A"
GOLD
PLATED
NICKEL
PLATED
.155 (3.94)
131-3701-261
131-3701-266
.095 (2.41)
131-3701-271
131-3701-276
IR*
COMPATIBLE
131-3701-275
* Tin/Lead solder dipped legs for IR Reflow Compatability.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMB - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
PC Mount
Straight Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-3701-231
131-3701-236
Straight Jack Receptacle - Surface Mount
GOLD PLATED
NICKEL PLATED
131-3711-201
131-3711-205
Connector Mounting Pads 60%/40% Tin/Lead Coated (Solder Plated).
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMB - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-3701-301
131-3701-306
Right Angle Jack Receptacle - Moisture Seal *
NICKEL BODY, GOLD INTERFACE,
IR COMPATIBLE*
131-3701-355*
* Tin/Lead solder dipped legs and Moisture Sealed for IR Reflow Compatability.
6
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMB - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
PC Mount
Right Angle Jack Receptacle - Die Cast
GOLD PLATED
NICKEL PLATED
131-1701-371
131-1701-376
Right Angle Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-3701-341
131-3701-346
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
7
SMB - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-3701-501
131-3701-506
End Launch Jack Receptacle - Round Contact
BOARD THICKNESS GOLD PLATED
NICKEL PLATED
"A"
"B"
.062 (1.57)
131-3701-801
131-3701-806
.068 (1.73)
.073 (1.85)
.042 (1.07)
131-3701-821
131-3701-826
.048 (1.22)
.093 (2.36)
End Launch Jack Receptacle - Tab Contact
BOARD THICKNESS GOLD PLATED
8
NICKEL PLATED
"A"
"B"
.062 (1.57)
131-3701-811
131-3701-816
.068 (1.73)
.083 (2.11)
.042 (1.07)
131-3701-831
131-3701-836
.048 (1.22)
.103 (2.62)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMB - 50 Ohm Connectors
Alphabetical Index
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
SMB Connectors - 50 Ohm
Adapters ....................................................................96
Bulkhead Mount and Panel Mount ............................94
Flexible Cable ............................................................84
Mini-75 Ohm ..............................................................98
PC Mount ..................................................................88
Semi-Rigid Cable ......................................................82
Specifications ............................................................81
Terminations ..............................................................97
Other Information
Assembly Instructions .............................................136
Assembly Tools........................................................132
Cable Assembly .......................................................177
Cable Information ....................................................176
Capabilities ..............................................................131
Mounting Hole Layouts ............................................174
Numerical Index ......................................................234
Ordering Information ...................................................2
Part Number Cross Reference ................................219
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMB - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range: Connectors ...................................................... 0-4 GHz
Dummy loads .................................................. 0-1 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled
Cabled
RG-178 cable .................................................... 1.30 + .04f
1.45 + .06f
RG-316, RG-58, and .086 semi-rigid cable ....... 1.25 + .04f
1.35 + .04f
Adapters ............................................................ 1.20 + .04f
Uncabled receptacles, dummy loads ........................................................ N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-178 ....................................................... 250
60
RG-316, RG-58, .086 semi-rigid
uncabled receptacles, adapters ................ 335
85
Dummy loads .................................................................................... N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ......................................................................... 750
Connectors for RG-316, RG-58, .086 semi-rigid,
uncabled receptacles, adapters ......................................................... 1000
Dummy loads .................................................................................... N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ......................................................................... 185
Connectors for RG-316, RG-58, .086 semi-rigid ................................... 250
Uncabled receptacles, adapters, dummy loads .................................... N/A
Insertion Loss: (dB maximum, tested at 1.5 GHz)
Straight cable connectors ............................................................... 0.30 dB
Right angle cable connectors ......................................................... 0.60 dB
Uncabled receptacles, adapters and dummy loads .............................. N/A
Insulation Resistance: 1000 megohms minimum
Initial After Environmental
Contact Resistance: (milliohms maximum)
Center contact (straight cabled connectors
and uncabled receptacles) .................................. 6.0
8.0
Center contact (right angle cabled
connectors and adapters) .................................. 12.0
16.0
Outer contact (gold plated connectors) ................... 1.0
1.5
Outer contact (nickel plated connectors) ................ 2.5
3.5
Braid to body (gold plated connectors) ................... 1.0
N/A
Braid to body (nickel plated connectors) ................. 2.5
N/A
RF Leakage: (dB minimum tested at 2.5 GHz)
Cable connectors .............................................................................. -55 dB
Uncabled receptacles, adapters and dummy loads ............................... N/A
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4 and 7
MHz)✝
Connectors for RG-178 ......................................................................... 500
Connectors for RG-316, RG-58 ............................................................. 700
Uncabled receptacles and adapters ...................................................... 600
Dummy loads ........................................................................................ N/A
Power Rating (Dummy Load): 0.5 watt @ +25oC, derated to 0.25 watt @
+125o C
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMB
Engagement/Disengagment Force: 2 pounds min to 14 pounds
maximum axial force
Contact Retention: 4 lbs. min axial force (captivated contacts)
1 inch-ounce min torque (uncabled receptacles)
Cable Retention:
Axial Force* (pounds) Torque (in-oz)
Connectors for RG-178 ............................... 10
N/A
Connectors for RG-316 ............................... 20
N/A
Connectors for RG-58 ................................. 40
16
Connectors for .086 semi-rigid .................... 30
16
* or cable breaking strength whichever is less.
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS
(Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: Connectors ....................................... - 65oC to + 165oC
Dummy loads ................................... - 65oC to + 125oC
Thermal Shock: MIL-STD-202, Method 107, Condition B (N/A dummy loads)
Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads)
Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads)
Vibration: MIL-STD-202, Method 204, Condition B (N/A dummy loads)
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated** per MILG-45204 .00001 min or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003"
min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204
.00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min. or nickel
plated per QQ-N-290
Cover Rings: Phosphor Bronze per QQ-B-750, gold plated per MIL-G-45204
.00001 min. or nickel plated per QQ-N-290.
MATING ENGAGEMENT FOR SMB
SERIES PER MIL-C-39012
Jack
Plug
Notes
1. ID of contact to meet VSWR mating characteristics and connector durability when
mated with a dia .019 /0.53 male contact.
2. Must meet the force to engage and disengage when mated with mating part.
Plug
2
Jack
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMB - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Bulkhead and Panel Mount
Front Mount Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-3701-411
131-3701-416
Rear Mount Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-3701-401
131-3701-406
Round Contact Jack Receptacle - Thread Mount
Ruggedized Interface
GOLD PLATED
NICKEL PLATED
131-3701-441
131-3701-446
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMB - 50 Ohm Connectors
Bulkhead and Panel Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Recessed Mount Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-3701-421
131-3701-426
2-Hole Flange Mount Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-3701-621
131-3701-626
4-Hole Flange Mount Jack Receptacle
4
GOLD PLATED
NICKEL PLATED
131-3701-631
131-3701-636
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMB - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Adatpers and Loads
131-3801-811 4
131-3801-816 4
131-3801-821 4
131-3801-826 4
131-3901-401 3
131-3901-406 3
131-3901-411 3
131-3901-416 3
131-3901-801 3
131-3901-806 3
131-3901-901 4
131-3901-906 4
Jack to Bulkhead Jack 3
Jack to Jack 3
Jack to Jack to Jack 4
Plug Dummy Load - 50 Ohm and 75 Ohm 4
Plug to Bulkhead Jack 3
Specifications 2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMB - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range: Connectors ...................................................... 0-4 GHz
Dummy loads .................................................. 0-1 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled
Cabled
RG-178 cable .................................................... 1.30 + .04f
1.45 + .06f
RG-316, RG-58, and .086 semi-rigid cable ....... 1.25 + .04f
1.35 + .04f
Adapters ............................................................ 1.20 + .04f
Uncabled receptacles, dummy loads ........................................................ N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-178 ....................................................... 250
60
RG-316, RG-58, .086 semi-rigid
uncabled receptacles, adapters ................ 335
85
Dummy loads .................................................................................... N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ......................................................................... 750
Connectors for RG-316, RG-58, .086 semi-rigid,
uncabled receptacles, adapters ......................................................... 1000
Dummy loads .................................................................................... N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ......................................................................... 185
Connectors for RG-316, RG-58, .086 semi-rigid ................................... 250
Uncabled receptacles, adapters, dummy loads .................................... N/A
Insertion Loss: (dB maximum, tested at 1.5 GHz)
Straight cable connectors ............................................................... 0.30 dB
Right angle cable connectors ......................................................... 0.60 dB
Uncabled receptacles, adapters and dummy loads .............................. N/A
Insulation Resistance: 1000 megohms minimum
Initial After Environmental
Contact Resistance: (milliohms maximum)
Center contact (straight cabled connectors
and uncabled receptacles) .................................. 6.0
8.0
Center contact (right angle cabled
connectors and adapters) .................................. 12.0
16.0
Outer contact (gold plated connectors) ................... 1.0
1.5
Outer contact (nickel plated connectors) ................ 2.5
3.5
Braid to body (gold plated connectors) ................... 1.0
N/A
Braid to body (nickel plated connectors) ................. 2.5
N/A
RF Leakage: (dB minimum tested at 2.5 GHz)
Cable connectors .............................................................................. -55 dB
Uncabled receptacles, adapters and dummy loads ............................... N/A
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4 and 7
MHz)✝
Connectors for RG-178 ......................................................................... 500
Connectors for RG-316, RG-58 ............................................................. 700
Uncabled receptacles and adapters ...................................................... 600
Dummy loads ........................................................................................ N/A
Power Rating (Dummy Load): 0.5 watt @ +25oC, derated to 0.25 watt @
+125o C
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMB
Engagement/Disengagment Force: 2 pounds min to 14 pounds
maximum axial force
Contact Retention: 4 lbs. min axial force (captivated contacts)
1 inch-ounce min torque (uncabled receptacles)
Cable Retention:
Axial Force* (pounds) Torque (in-oz)
Connectors for RG-178 ............................... 10
N/A
Connectors for RG-316 ............................... 20
N/A
Connectors for RG-58 ................................. 40
16
Connectors for .086 semi-rigid .................... 30
16
* or cable breaking strength whichever is less.
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS
(Meets or exceed the applicable paragraph of MIL-C-39012)
Temperature Range: Connectors ....................................... - 65oC to + 165oC
Dummy loads ................................... - 65oC to + 125oC
Thermal Shock: MIL-STD-202, Method 107, Condition B (N/A dummy loads)
Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads)
Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads)
Vibration: MIL-STD-202, Method 204, Condition B (N/A dummy loads)
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated** per MILG-45204 .00001 min or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003"
min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204
.00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min. or nickel
plated per QQ-N-290
Cover Rings: Phosphor Bronze per QQ-B-750, gold plated per MIL-G-45204
.00001 min. or nickel plated per QQ-N-290.
MATING ENGAGEMENT FOR SMB
SERIES PER MIL-C-39012
Jack
Plug
Notes
1. ID of contact to meet VSWR mating characteristics and connector durability when
mated with a dia .019 /0.53 male contact.
2. Must meet the force to engage and disengage when mated with mating part.
Plug
2
Jack
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMB - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
In-Series Adapters
Jack to Jack
GOLD PLATED
NICKEL PLATED
131-3901-801
131-3901-806
Jack to Bulkhead Jack
GOLD PLATED
NICKEL PLATED
131-3901-401
131-3901-406
Plug to Bulkhead Jack
GOLD PLATED
NICKEL PLATED
131-3901-411
131-3901-416
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMB - 50 Ohm Connectors
In-Series Adapters and Terminations
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Jack to Jack to Jack
GOLD PLATED
NICKEL PLATED
131-3901-901
131-3901-906
Plug Dummy Load - 50 Ohm and 75 Ohm
4
FREQ. RANGE
GOLD PLATED
NICKEL
RESISTANCE
0-1 GHz
0-1 GHz
131-3801-811
131-3801-821
131-3801-816
131-3801-826
50 ohm
75 ohm
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
Mini-75 Ohm SMB Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Alphabetical Index
131-8303-401 4
131-8303-406 4
131-8304-401 4
131-8304-406 4
131-8403-001 3
131-8403-006 3
131-8403-011 4
131-8403-016 4
131-8403-101 5
131-8403-106 5
131-8403-111 5
131-8403-116 5
131-8404-001 3
131-8404-006 3
131-8404-011 4
131-8404-016 4
131-8404-101 5
131-8404-106 5
131-8404-111 5
131-8404-116 5
131-8409-001 3
131-8409-006 3
131-8409-101 5
131-8409-106 5
131-8445-001 3
131-8445-006 3
131-8445-101 5
131-8445-106 5
Right Angle Crimp Type Plug - Captivated Contact 5
Right Angle Crimp Type Plug - Captivated Contact - 5
Straight Crimp Type Bulkhead Jack - Solder or Crimp 4
Straight Crimp Type Plug - Captivated Contact 3
Straight Crimp Type Plug - Die Cast -Solder or Crimp 4
Straight Crimp Type Plug - Solder or Crimp 3
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
Mini-75 Ohm SMB Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedence: 75 ohms
Frequency Range: 0-2 GHz
VSWR: f = GHz
RG-179, RG-59, Belden 735A cable:
Straight cabled connectors ............................ 1.25 + .04f
Right angle cabled connectors ...................... 1.35 + .04f
Adapters .......................................................................................... 1.20 + .04f
Type N Adapters ............................................................................. 1.05 +. 01f
Matching pad 50 ohm/75 ohm .......................................................... 1.05 + .1f
Loads .............................................................................................. 1.05 + .01f
Uncabled receptacles, opens, shorts ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-179, RG-59, Belden 735A,
uncabled receptacles, adapters ........................... 335
85
Open, shorts, loads, matching pad .......................... N/A
N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-179, RG-59, Belden 735A,
uncabled receptacles, adapters ........................................................ 1000
Open, shorts, loads, matching pad ......................................................... N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-179, RG-59, Belden 735A ....................................... 250
Uncabled receptacles, adapters, open, shorts, loads, matching pad: N/A
Electrical Length: Open + 1.5o (+ 5.2o relative to short)
Short + 1.5o (+ 5.2o relative to open)
Adapters + 5.2o (N/A for Jack-Bulkhead Jack and N Types)
Insertion Loss: (dB maximum, tested at 1.5 GHz)
Straight cable connectors ............................................................... 0.30 dB
Right angle cable connectors ......................................................... 0.60 dB
Matching pad .......................................................................... 6 dB nominal
Uncabled receptacles, adapters, opens, shorts, loads .......................... N/A
Insulation Resistance: 1000 megohms minimum
Contact Resistance: (milliohms maximum)
After
Initial
Environmental
Center contact (straight cabled connectors,
uncabled receptacles, opens, shorts, loads) ....... 6.0
8.0
Center contact (right angle cabled
connectors and adapters) .................................. 12.0
16.0
Outer contact (gold plated connectors) ................... 1.0
1.5
Outer contact (nickel plated connectors) ................ 2.5
3.5
Braid to body (gold plated connectors) ................... 1.0
N/A
Braid to body (nickel plated connectors) ................. 2.5
N/A
RF Leakage: (dB minimum tested at 2.5 GHz)
Cable connectors .............................................................................. -55 dB
Uncabled receptacles, adapters opens, shorts, loads,matching pad...N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at
4 and 7 MHz)✝
Connectors for RG-179, RG-59, Belden 735A ....................................... 700
Uncabled receptacles and adapters ....................................................... 600
Opens, shorts, loads, matching pad ....................................................... N/A
Power Rating: (Loads and matching pad only) 1.0 watt at +25oC derated
linearly to .5 watt at +125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMB
Engagement/Disengagment Force: 2 pounds minimum to
14 pounds maximum axial force
Contact Retention: 4 lbs. minimum axial force (captivated contacts)
1 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-179, Belden 735A ............... 20
N/A
Connectors for RG-59 ........................................ 40
N/A
* or cable breaking strength whichever is less.
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph
of MIL-C-39012)
Temperature Range: - 65oC to +165oC -- Connectors and adapters
- 65oC to +125oC -- Loads, matching pad
20oC to 26oC -- Opens, shorts
Thermal Shock: MIL-STD-202, Method 107, Condition B
(N/A opens, shorts, loads, matching pad)
Corrosion: MIL-STD-202, Method 101, Condition B
(N/A opens, shorts, loads, matching pad)
Shock: MIL-STD-210, Method 213, Condition B
(N/A opens, shorts, loads, matching pad)
Vibration: MIL-STD-202, Method 204, Condition B
(N/A opens, shorts, loads, matching pad)
Temperature Coefficient: (Loads only) + 300 ppm/oC
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated** per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
N type adapters stainless steel per QQ-S-763, passivated per
MIL-F-14072
Contacts: Male & Female - beryllium copper per QQ-C-530, gold plated per
MIL-G-45204 .00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min. or
nickel plated per QQ-N-290
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
MATING ENGAGEMENT FOR MINI-75 OHM SMB SERIES (INTERMATABLE WITH STANDARD 50 OHM SMB)
Plug
2
Jack
Plug
Jack
NOTES:
1. ID of contact to meet
VSWR, mating characteristics and connector
durability when mated
with a dia .019-.021
(0.48/0.53) male contact.
2. Must meet the force to
engage and disengage
when mated with mating
part.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
Mini-75 Ohm SMB Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug Solder or Crimp Captivated Contact
CABLE
TYPE
GOLD
PLATED
NICKEL
PLATED
RG-179, 187
131-8403-001
131-8403-006
RG-179 DS
RG-187 DS
131-8404-001
131-8404-006
Belden 735A
131-8445-001
131-8445-006
Assembly instructions page 167.
See page 132 for Cable Assembly Tools.
Straight Crimp Type Plug - Captivated Contact
CABLE
TYPE
GOLD
PLATED
NICKEL
PLATED
RG-59
131-8409-001
131-8409-006
Assembly instructions page 167.
See page 132 for Cable Assembly Tools.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
Mini-75 Ohm SMB Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug - Die Cast Solder or Crimp Captivated Contact
CABLE
TYPE
GOLD
PLATED
NICKEL
PLATED
RG-179, 187
131-8403-011
131-8403-016
RG-179 DS
RG-187 DS
131-8404-011
131-8404-016
Straight Crimp Type Bulkhead Jack Solder or Crimp Captivated Contact
CABLE
TYPE
GOLD
PLATED
NICKEL
PLATED
RG-179, 187
131-8303-401
131-8303-406
RG-179 DS
RG-187 DS
131-8304-401
131-8304-406
Mounting hole layout figure 5 page 174.
4
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
Mini-75 Ohm SMB Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Crimp Type Plug - Captivated Contact
CABLE TYPE
RG-179, 187
RG-179 DS
RG-187 DS
GOLD PLATED
131-8403-101
NICKEL PLATED
131-8403-106
131-8404-101
131-8404-106
Belden 735A
131-8445-101
131-8445-106
Right Angle Crimp Type Plug - Captivated Contact
CABLE TYPE
RG-59
GOLD PLATED
131-8409-101
NICKEL PLATED
131-8409-106
Right Angle Crimp Type Plug - Captivated Contact - Die Cast
CABLE TYPE
RG-179, 187
RG-179 DS
RG-187 DS
GOLD PLATED
131-8403-111
NICKEL PLATED
131-8403-116
131-8404-111
131-8404-116
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
Mini-75 Ohm SMB Connectors
Alphabetical Index
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
131-8701-201 3
131-8701-206 3
131-8701-211 3
131-8701-216 3
131-8701-251 3
131-8701-256 3
131-8701-261 3
131-8701-266 3
131-8701-301 4
131-8701-306 4
131-8701-501 5
131-8701-506 5
131-8701-601 5
131-8701-606 5
131-8701-841 5
131-8701-846 5
131-8701-851 5
131-8701-856 5
131-8711-201 4
131-8711-202 4
131-8711-207 4
131-8711-208 4
2-Hole Flange Mount Jack Receptacle 5
End Launch Jack Receptacle 5
Right Angle Bulkhead Jack Receptacle 5
Right Angle Jack Receptacle 4
Specifications 2
Straight Bulkhead Jack Receptacle 3
Straight Jack Receptacle 3
Straight Jack Receptacle - Surface Mount 4
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
Mini-75 Ohm SMB Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedence: 75 ohms
Frequency Range: 0-2 GHz
VSWR: f = GHz
RG-179, RG-59, Belden 735A cable:
Straight cabled connectors ............................ 1.25 + .04f
Right angle cabled connectors ...................... 1.35 + .04f
Adapters .......................................................................................... 1.20 + .04f
Type N Adapters ............................................................................. 1.05 +. 01f
Matching pad 50 ohm/75 ohm .......................................................... 1.05 + .1f
Loads .............................................................................................. 1.05 + .01f
Uncabled receptacles, opens, shorts ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-179, RG-59, Belden 735A,
uncabled receptacles, adapters ........................... 335
85
Open, shorts, loads, matching pad .......................... N/A
N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-179, RG-59, Belden 735A,
uncabled receptacles, adapters ........................................................ 1000
Open, shorts, loads, matching pad ......................................................... N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-179, RG-59, Belden 735A ....................................... 250
Uncabled receptacles, adapters, open, shorts, loads, matching pad: N/A
Electrical Length: Open + 1.5o (+ 5.2o relative to short)
Short + 1.5o (+ 5.2o relative to open)
Adapters + 5.2o (N/A for Jack-Bulkhead Jack and N Types)
Insertion Loss: (dB maximum, tested at 1.5 GHz)
Straight cable connectors ............................................................... 0.30 dB
Right angle cable connectors ......................................................... 0.60 dB
Matching pad .......................................................................... 6 dB nominal
Uncabled receptacles, adapters, opens, shorts, loads .......................... N/A
Insulation Resistance: 1000 megohms minimum
Contact Resistance: (milliohms maximum)
After
Initial
Environmental
Center contact (straight cabled connectors,
uncabled receptacles, opens, shorts, loads) ....... 6.0
8.0
Center contact (right angle cabled
connectors and adapters) .................................. 12.0
16.0
Outer contact (gold plated connectors) ................... 1.0
1.5
Outer contact (nickel plated connectors) ................ 2.5
3.5
Braid to body (gold plated connectors) ................... 1.0
N/A
Braid to body (nickel plated connectors) ................. 2.5
N/A
RF Leakage: (dB minimum tested at 2.5 GHz)
Cable connectors .............................................................................. -55 dB
Uncabled receptacles, adapters opens, shorts, loads,matching pad...N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at
4 and 7 MHz)✝
Connectors for RG-179, RG-59, Belden 735A ....................................... 700
Uncabled receptacles and adapters ....................................................... 600
Opens, shorts, loads, matching pad ....................................................... N/A
Power Rating: (Loads and matching pad only) 1.0 watt at +25oC derated
linearly to .5 watt at +125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMB
Engagement/Disengagment Force: 2 pounds minimum to
14 pounds maximum axial force
Contact Retention: 4 lbs. minimum axial force (captivated contacts)
1 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-179, Belden 735A ............... 20
N/A
Connectors for RG-59 ........................................ 40
N/A
* or cable breaking strength whichever is less.
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph
of MIL-C-39012)
Temperature Range: - 65oC to +165oC -- Connectors and adapters
- 65oC to +125oC -- Loads, matching pad
20oC to 26oC -- Opens, shorts
Thermal Shock: MIL-STD-202, Method 107, Condition B
(N/A opens, shorts, loads, matching pad)
Corrosion: MIL-STD-202, Method 101, Condition B
(N/A opens, shorts, loads, matching pad)
Shock: MIL-STD-210, Method 213, Condition B
(N/A opens, shorts, loads, matching pad)
Vibration: MIL-STD-202, Method 204, Condition B
(N/A opens, shorts, loads, matching pad)
Temperature Coefficient: (Loads only) + 300 ppm/oC
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated** per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
N type adapters stainless steel per QQ-S-763, passivated per
MIL-F-14072
Contacts: Male & Female - beryllium copper per QQ-C-530, gold plated per
MIL-G-45204 .00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min. or
nickel plated per QQ-N-290
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
MATING ENGAGEMENT FOR MINI-75 OHM SMB SERIES (INTERMATABLE WITH STANDARD 50 OHM SMB)
Plug
2
Jack
Plug
Jack
NOTES:
1. ID of contact to meet
VSWR, mating characteristics and connector
durability when mated
with a dia .019-.021
(0.48/0.53) male contact.
2. Must meet the force to
engage and disengage
when mated with mating
part.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
Mini-75 Ohm SMB Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-8701-201
131-8701-206
* For PC board thickness other than .062 inches, contact factory.
Straight Jack Receptacle
NEW
GOLD PLATED
NICKEL PLATED
“A”
131-8701-251
131-8701-256
.155 (3.94)
131-8701-261
131-8701-266
.095 (2.41)
Straight Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-8701-211
131-8701-216
Mounting hole layout figures 5 and 7 page 174.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
Mini-75 Ohm SMB Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Jack Receptacle - Surface Mount
NEW
GOLD PLATED
TIN PLATED
“FIG”
“PACKAGING”
131-8711-201
131-8711-207
1
STOCK
131-8711-202
131-8711-208
1
TAPE AND REEL
750 pcs/reel
Right Angle Jack Receptacle
GOLD PLATED
131-8701-301
NICKEL PLATED
131-8701-306
* For PC board thickness other than .062 inches, contact factory.
4
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
Mini-75 Ohm SMB Connectors
PC Mount and Panel Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Bulkhead Jack Receptacle
GOLD PLATED
131-8701-501
NICKEL PLATED
131-8701-506
* For PC board thickness other than .062 inches, contact factory.
2-Hole Flange Mount Jack Receptacle
GOLD PLATED
131-8701-601
NICKEL PLATED
131-8701-606
End Launch Jack Receptacle
BOARD THICKNESS
.062 (1.57)
.047 (1.19)
GOLD PLATED
131-8701-841
131-8701-851
NICKEL PLATED
131-8701-846
131-8701-856
“A”
.068 (1.73)
.053 (1.35)
“B”
.047 (1.19)
.062 (1.57)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
Mini-75 Ohm SMB Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Adapters
131-8000-001 6
131-8901-401 3
131-8901-406 3
131-8901-801 3
131-8901-811 3
131-8901-821 3
134-1029-011 4
134-1069-001 4
134-1069-011 4
134-1069-021 5
134-1069-031 5
75 Ohm Type N Jack to Mini-75 Ohm SMB Jack 5
75 Ohm Type N Jack to Mini-75 Ohm SMB Plug 5
75 Ohm Type N Plug to Mini-75 Ohm SMB Jack 4
75 Ohm Type N Plug to Mini-75 Ohm SMB Plug 4
Between-Series Matching Pad50 Ohm SMB Bulkhead Jack 4
Jack to Bulkhead Jack* 3
Jack to Jack 3
Jack to Plug 3
Plug to Plug 3
Specifications 2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
Mini-75 Ohm SMB Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedence: 75 ohms
Frequency Range: 0-2 GHz
VSWR: f = GHz
RG-179, RG-59, Belden 735A cable:
Straight cabled connectors ............................ 1.25 + .04f
Right angle cabled connectors ...................... 1.35 + .04f
Adapters .......................................................................................... 1.20 + .04f
Type N Adapters ............................................................................. 1.05 +. 01f
Matching pad 50 ohm/75 ohm .......................................................... 1.05 + .1f
Loads .............................................................................................. 1.05 + .01f
Uncabled receptacles, opens, shorts ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-179, RG-59, Belden 735A,
uncabled receptacles, adapters ........................... 335
85
Open, shorts, loads, matching pad .......................... N/A
N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-179, RG-59, Belden 735A,
uncabled receptacles, adapters ........................................................ 1000
Open, shorts, loads, matching pad ......................................................... N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-179, RG-59, Belden 735A ....................................... 250
Uncabled receptacles, adapters, open, shorts, loads, matching pad: N/A
Electrical Length: Open + 1.5o (+ 5.2o relative to short)
Short + 1.5o (+ 5.2o relative to open)
Adapters + 5.2o (N/A for Jack-Bulkhead Jack and N Types)
Insertion Loss: (dB maximum, tested at 1.5 GHz)
Straight cable connectors ............................................................... 0.30 dB
Right angle cable connectors ......................................................... 0.60 dB
Matching pad .......................................................................... 6 dB nominal
Uncabled receptacles, adapters, opens, shorts, loads .......................... N/A
Insulation Resistance: 1000 megohms minimum
Contact Resistance: (milliohms maximum)
After
Initial
Environmental
Center contact (straight cabled connectors,
uncabled receptacles, opens, shorts, loads) ....... 6.0
8.0
Center contact (right angle cabled
connectors and adapters) .................................. 12.0
16.0
Outer contact (gold plated connectors) ................... 1.0
1.5
Outer contact (nickel plated connectors) ................ 2.5
3.5
Braid to body (gold plated connectors) ................... 1.0
N/A
Braid to body (nickel plated connectors) ................. 2.5
N/A
RF Leakage: (dB minimum tested at 2.5 GHz)
Cable connectors .............................................................................. -55 dB
Uncabled receptacles, adapters opens, shorts, loads,matching pad...N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at
4 and 7 MHz)✝
Connectors for RG-179, RG-59, Belden 735A ....................................... 700
Uncabled receptacles and adapters ....................................................... 600
Opens, shorts, loads, matching pad ....................................................... N/A
Power Rating: (Loads and matching pad only) 1.0 watt at +25oC derated
linearly to .5 watt at +125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMB
Engagement/Disengagment Force: 2 pounds minimum to
14 pounds maximum axial force
Contact Retention: 4 lbs. minimum axial force (captivated contacts)
1 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-179, Belden 735A ............... 20
N/A
Connectors for RG-59 ........................................ 40
N/A
* or cable breaking strength whichever is less.
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph
of MIL-C-39012)
Temperature Range: - 65oC to +165oC -- Connectors and adapters
- 65oC to +125oC -- Loads, matching pad
20oC to 26oC -- Opens, shorts
Thermal Shock: MIL-STD-202, Method 107, Condition B
(N/A opens, shorts, loads, matching pad)
Corrosion: MIL-STD-202, Method 101, Condition B
(N/A opens, shorts, loads, matching pad)
Shock: MIL-STD-210, Method 213, Condition B
(N/A opens, shorts, loads, matching pad)
Vibration: MIL-STD-202, Method 204, Condition B
(N/A opens, shorts, loads, matching pad)
Temperature Coefficient: (Loads only) + 300 ppm/oC
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated** per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
N type adapters stainless steel per QQ-S-763, passivated per
MIL-F-14072
Contacts: Male & Female - beryllium copper per QQ-C-530, gold plated per
MIL-G-45204 .00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min. or
nickel plated per QQ-N-290
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
MATING ENGAGEMENT FOR MINI-75 OHM SMB SERIES (INTERMATABLE WITH STANDARD 50 OHM SMB)
Plug
2
Jack
Plug
Jack
NOTES:
1. ID of contact to meet
VSWR, mating characteristics and connector
durability when mated
with a dia .019-.021
(0.48/0.53) male contact.
2. Must meet the force to
engage and disengage
when mated with mating
part.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
Mini-75 Ohm SMB Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Alphabetical Index
131-8701-801 3
131-8701-811 3
131-8701-821 3
131-8801-801 3
131-8801-811 3
131-8801-821 3
Jack Precision Load 3
Matched Jack Open and Short 3
Matched Plug Open and Short 3
Plug Precision Load 3
Specifications 2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
Mini-75 Ohm SMB Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedence: 75 ohms
Frequency Range: 0-2 GHz
VSWR: f = GHz
RG-179, RG-59, Belden 735A cable:
Straight cabled connectors ............................ 1.25 + .04f
Right angle cabled connectors ...................... 1.35 + .04f
Adapters .......................................................................................... 1.20 + .04f
Type N Adapters ............................................................................. 1.05 +. 01f
Matching pad 50 ohm/75 ohm .......................................................... 1.05 + .1f
Loads .............................................................................................. 1.05 + .01f
Uncabled receptacles, opens, shorts ......................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-179, RG-59, Belden 735A,
uncabled receptacles, adapters ........................... 335
85
Open, shorts, loads, matching pad .......................... N/A
N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-179, RG-59, Belden 735A,
uncabled receptacles, adapters ........................................................ 1000
Open, shorts, loads, matching pad ......................................................... N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-179, RG-59, Belden 735A ....................................... 250
Uncabled receptacles, adapters, open, shorts, loads, matching pad: N/A
Electrical Length: Open + 1.5o (+ 5.2o relative to short)
Short + 1.5o (+ 5.2o relative to open)
Adapters + 5.2o (N/A for Jack-Bulkhead Jack and N Types)
Insertion Loss: (dB maximum, tested at 1.5 GHz)
Straight cable connectors ............................................................... 0.30 dB
Right angle cable connectors ......................................................... 0.60 dB
Matching pad .......................................................................... 6 dB nominal
Uncabled receptacles, adapters, opens, shorts, loads .......................... N/A
Insulation Resistance: 1000 megohms minimum
Contact Resistance: (milliohms maximum)
After
Initial
Environmental
Center contact (straight cabled connectors,
uncabled receptacles, opens, shorts, loads) ....... 6.0
8.0
Center contact (right angle cabled
connectors and adapters) .................................. 12.0
16.0
Outer contact (gold plated connectors) ................... 1.0
1.5
Outer contact (nickel plated connectors) ................ 2.5
3.5
Braid to body (gold plated connectors) ................... 1.0
N/A
Braid to body (nickel plated connectors) ................. 2.5
N/A
RF Leakage: (dB minimum tested at 2.5 GHz)
Cable connectors .............................................................................. -55 dB
Uncabled receptacles, adapters opens, shorts, loads,matching pad...N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at
4 and 7 MHz)✝
Connectors for RG-179, RG-59, Belden 735A ....................................... 700
Uncabled receptacles and adapters ....................................................... 600
Opens, shorts, loads, matching pad ....................................................... N/A
Power Rating: (Loads and matching pad only) 1.0 watt at +25oC derated
linearly to .5 watt at +125oC
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMB
Engagement/Disengagment Force: 2 pounds minimum to
14 pounds maximum axial force
Contact Retention: 4 lbs. minimum axial force (captivated contacts)
1 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-179, Belden 735A ............... 20
N/A
Connectors for RG-59 ........................................ 40
N/A
* or cable breaking strength whichever is less.
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph
of MIL-C-39012)
Temperature Range: - 65oC to +165oC -- Connectors and adapters
- 65oC to +125oC -- Loads, matching pad
20oC to 26oC -- Opens, shorts
Thermal Shock: MIL-STD-202, Method 107, Condition B
(N/A opens, shorts, loads, matching pad)
Corrosion: MIL-STD-202, Method 101, Condition B
(N/A opens, shorts, loads, matching pad)
Shock: MIL-STD-210, Method 213, Condition B
(N/A opens, shorts, loads, matching pad)
Vibration: MIL-STD-202, Method 204, Condition B
(N/A opens, shorts, loads, matching pad)
Temperature Coefficient: (Loads only) + 300 ppm/oC
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated** per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
N type adapters stainless steel per QQ-S-763, passivated per
MIL-F-14072
Contacts: Male & Female - beryllium copper per QQ-C-530, gold plated per
MIL-G-45204 .00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min. or
nickel plated per QQ-N-290
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
MATING ENGAGEMENT FOR MINI-75 OHM SMB SERIES (INTERMATABLE WITH STANDARD 50 OHM SMB)
Plug
2
Jack
Plug
Jack
NOTES:
1. ID of contact to meet
VSWR, mating characteristics and connector
durability when mated
with a dia .019-.021
(0.48/0.53) male contact.
2. Must meet the force to
engage and disengage
when mated with mating
part.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
Mini-75 Ohm SMB Connectors
Terminations
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Plug Precision Load
VSWR & FREQ. RANGE
1.05 + .01f (GHz)
GOLD PLATED
0-2GHz
131-8801-801
Jack Precision Load
VSWR & FREQ. RANGE
1.05 + .01f (GHz)
GOLD PLATED
0-2GHz
131-8701-801
Matched Plug Open and Short
TERMINATION
GOLD PLATED
OPEN
131-8801-821
SHORT
131-8801-811
Matched Jack Open and Short
TERMINATION
GOLD PLATED
OPEN
131-8701-821
SHORT
131-8701-811
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
Mini-75 Ohm SMB Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
In-Series Matched Adapters
Jack to Jack
GOLD PLATED
131-8901-801
Plug to Plug
GOLD PLATED
131-8901-811
Jack to Plug
GOLD PLATED
131-8901-821
Jack to Bulkhead Jack*
GOLD PLATED
131-8901-401
NICKEL PLATED
131-8901-406
* Electrical length not matched to other adapters shown.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
Mini-75 Ohm SMB Connectors
Between-Series Adapters
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Between-Series Matching Pad
50 Ohm SMB Bulkhead Jack to Mini-75 Ohm SMB Plug
GOLD PLATED
134-1029-011
75 Ohm Type N Plug to Mini-75 Ohm SMB Plug
STAINLESS STEEL PASSIVATED
134-1069-001
75 Ohm Type N Plug to Mini-75 Ohm SMB Jack
STAINLESS STEEL PASSIVATED
134-1069-011
4
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
Mini-75 Ohm SMB Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Between-Series Adapters
75 Ohm Type N Jack to Mini-75 Ohm SMB Plug
STAINLESS STEEL PASSIVATED
134-1069-021
75 Ohm Type N Jack to Mini-75 Ohm SMB Jack
STAINLESS STEEL PASSIVATED
134-1069-031
MATING ENGAGEMENT FOR 75 OHM “N” SERIES BASED ON MIL-STD-348A “N” SERIES
Jack
Plug
NOTES:
1. ID of contact to meet VSWR, mating characteristics and connector durability when mated with
a dia .036/.037 (0.91/0.94) male contact.
2. Clearance for mating connector coupling nut.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
Mini-75 Ohm SMB Connectors
Terminations
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Plug Precision Load
VSWR & FREQ. RANGE
1.05 + .01f (GHz)
GOLD PLATED
0-2GHz
131-8801-801
Jack Precision Load
VSWR & FREQ. RANGE
1.05 + .01f (GHz)
GOLD PLATED
0-2GHz
131-8701-801
Matched Plug Open and Short
TERMINATION
GOLD PLATED
OPEN
131-8801-821
SHORT
131-8801-811
Matched Jack Open and Short
TERMINATION
GOLD PLATED
OPEN
131-8701-821
SHORT
131-8701-811
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
SMC Connectors
Bulkhead and Panel Mount
Johnson Components® SMC connectors meet or exceed
all applicable requirements of the MIL-C-39012 coaxial
connector specification. SMC connectors have similar
interfaces as SMB connectors, but utilize threaded
coupling instead of snap-on coupling. SMC connectors
can be used up to 10 GHz. SMC connectors are used in
higher vibration applications than SMB connectors, such
as microwave telephony and other telecommunication
equipment.
We have designed many OEM custom connectors. Please
contact your Johnson Components sales representative
with your unique requirements.
Cabled Connectors
In-Series Adapters
SMC - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Alphabetical Index
131-6302-401 5
131-6302-406 5
131-6303-401 5
131-6303-406 5
131-6304-401 5
131-6304-406 5
131-6333-401 5
131-6333-406 5
131-6402-001 4
131-6402-006 4
131-6402-101 5
131-6402-106 5
131-6403-001 4
131-6403-006 4
131-6403-101 5
131-6403-106 5
131-6404-001 4
131-6404-006 4
131-6404-101 5
131-6404-106 5
131-6433-001 4
131-6433-006 4
131-6433-101 5
131-6433-106 5
131-6593-401 4
131-6593-406 4
131-6693-001 3
131-6693-006 3
131-6693-101 3
131-6693-106 3
Right Angle Crimp Type Plug - Captivated Contact 5
Right Angle Solder Type Plug - Captivated Contact 3
Specifications 2
Straight Crimp Type Bulkhead Jack - Captivated Contact 5
Straight Crimp Type Plug - Captivated Contact 4
Straight Solder Type Bulkhead Jack - Captivated Contact 4
Straight Solder Type Plug - Captivated Contact 3
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMC - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedence: 50 ohms
Frequency Range: 0-10 GHz
VSWR: (f = GHz)
Straight Cabled
RG-178 cable ................................... 1.25 + .04f
RG-316 and .086 semi-rigid
cable ............................................. 1.20 + .04f
Uncabled receptacles ............................ N/A
Adapters ........................................... 1.20 + .04f
Right Angle Cabled
1.40 + .06f
1.30 + .04f
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-178 ............................................... 250
60
RG-316, .086 semi-rigid
uncabled receptacles, adapters ........ 335
85
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ........................................................................... 750
Connectors for RG-316, .086 semi-rigid
uncabled receptacles, adapters ........................................................... 1000
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ........................................................................... 185
Connectors for RG-316, .086 semi-rigid .................................................. 250
Uncabled receptacles and adapters ........................................................ N/A
Insertion Loss: (dB maximum, tested at 4 GHz)
Straight cable connectors .................................................................. 0.25 dB
Right angle cable connectors ............................................................ 0.50 dB
Uncabled receptacles and adapters ........................................................ N/A
Insulation Resistance: 1000 megohms minimum
Contact Resistance: (milliohms maximum)
After
Initial
Environmental
Center contact (straight cabled
connectors and uncabled receptacles) .............. 6.0
8.0
Center contact (right angle cabled
connectors and adapters) ................................ 12.0
16.0
Outer contact (gold plated connectors) ................. 1.0
N/A
Outer contact (nickel plated connectors) .............. 2.5
N/A
Braid to body (gold plated connectors) ................. 1.0
N/A
Braid to body (nickel plated connectors) ............... 2.5
N/A
RF Leakage: (dB minimum tested at 2.5 GHz)
Cable connectors ............................................................................... -55 dB
Uncabled receptacles and adapters ........................................................ N/A
** All gold plated parts inlcude a .00005" min. nickel underplate barrier layer.
RF High Potential Withstanding Voltage: (Vrms minimum, tested at
4 and 7 MHz)✝
Connectors for RG-178 ........................................................................... 500
Connectors for RG-316 ........................................................................... 700
Uncabled receptacles and adapters ........................................................ 600
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMC
Engagement/Disengagment Force: 16 inch-ounce maximum torque
Mating Torque: 35 to 50 inch-ounce
Coupling Proof Torque: 100 inch-ounce minimum
Coupling Nut Retention: 35 pounds minimum
Contact Retention: 4 lbs. minimum axial force (captivated contacts)
1 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-178 ...................................... 10
N/A
Connectors for RG-316 ...................................... 20
N/A
Connectors for .086 semi-rigid ........................... 30
16
* or cable breaking strength whichever is less
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of
MIL-C-39012
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-210, Method 213, Condition C
Vibration: MIL-STD-202, Method 204, Condition D
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated** per MIL-G-45204 .00001" min or
nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204
.00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204
.00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533, unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) per QQ-B-750, gold plated per MIL-G-45204 .00001" min. or
nickel plated per QQ-N-290
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
MATING ENGAGEMENT FOR SMC SERIES PER MIL-C-39012
PLUG
PLUG
2
JACK
JACK
NOTES
1. Inside of contact to meet VSWR, mating characteristics and connector durability when mated with
a dia .019/.021 (0.48/0.53) male contact.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMC - 50 Ohm Connectors
For Semi-Rigid Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Solder Type Plug - Captivated Contact
CABLE
TYPE
GOLD
PLATED
.086 Semi-Rigid 131-6693-001
NICKEL
PLATED
131-6693-006
Right Angle Solder Type Plug - Captivated Contact
CABLE
TYPE
GOLD
PLATED
.086 Semi-Rigid 131-6693-101
NICKEL
PLATED
131-6693-106
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMC - 50 Ohm Connectors
For Semi-Rigid and Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Solder Type Bulkhead Jack Captivated Contact
CABLE
TYPE
GOLD
PLATED
.086 Semi-Rigid 131-6593-401
NICKEL
PLATED
131-6593-406
Straight Crimp Type Plug - Captivated Contact
CABLE
TYPE
GOLD
PLATED
NICKEL
PLATED
RG-178/U, 196
131-6402-001
131-6402-006
RG-161/U, 174,
131-6403-001
188, 316
131-6403-006
RG-316 DS,
188 DS
131-6404-001
131-6404-006
RG-179/U, 187
131-6433-001
131-6433-006
4
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMC - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Crimp Type Plug - Captivated Contact
CABLE
TYPE
GOLD
PLATED
NICKEL
PLATED
RG-178/U, 196 131-6402-101
131-6402-106
RG-161/U, 174,
131-6403-101
188, 316
131-6403-106
RG-316 DS,
188 DS
131-6404-101
131-6404-106
RG-179/U, 187 131-6433-101
131-6433-106
Straight Crimp Type Bulkhead Jack Captivated Contact
CABLE
TYPE
GOLD
PLATED
NICKEL
PLATED
RG-178/U, 196 131-6302-401
131-6302-406
RG-161/U, 174,
131-6303-401
188, 316
131-6303-406
RG-316 DS,
188 DS
131-6304-401
131-6304-406
RG-179/U, 187
131-6333-401
131-6333-406
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMC - 50 Ohm Connectors
Alphabetical Index
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
131-6701-201 3
131-6701-206 3
131-6701-211 3
131-6701-215* 3
131-6701-216 3
131-6701-301 4
131-6701-306 4
131-6701-315* 5
131-6701-341 5
131-6701-346 5
131-6701-401 7
131-6701-406 7
131-6701-411 7
131-6701-416 7
131-6701-621 8
131-6701-626 8
131-6701-631 8
131-6701-636 8
131-6701-801 6
131-6701-806 6
131-6701-821 6
131-6701-826 6
131-6701-831 6
131-6701-836 6
131-6711-201 4
131-6711-205 4
131-6801-201 3
131-6801-206 3
2-Hole Flange Mount Jack Receptacle 8
4-Hole Flange Mount Jack Receptacle 8
End Launch Jack Receptacle - Round Contact 6
End Launch Jack Receptacle - Tab Contact 6
Front Mount Bulkhead Jack Receptacle 7
Rear Mount Bulkhead Jack Receptacle 7
Right Angle Bulkhead Jack Receptacle 5
Right Angle Jack Receptacle 4
Right Angle Jack Receptacle - Moisture Seal* 5
Specifications 2
Straight Jack Receptacle 3
Straight Jack Receptacle - Surface Mount 4
Straight Plug Receptacle 3
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMC - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedence: 50 ohms
Frequency Range: 0-10 GHz
VSWR: (f = GHz)
Straight Cabled
RG-178 cable ................................... 1.25 + .04f
RG-316 and .086 semi-rigid
cable ............................................. 1.20 + .04f
Uncabled receptacles ............................ N/A
Adapters ........................................... 1.20 + .04f
Right Angle Cabled
1.40 + .06f
1.30 + .04f
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-178 ............................................... 250
60
RG-316, .086 semi-rigid
uncabled receptacles, adapters ........ 335
85
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ........................................................................... 750
Connectors for RG-316, .086 semi-rigid
uncabled receptacles, adapters ........................................................... 1000
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ........................................................................... 185
Connectors for RG-316, .086 semi-rigid .................................................. 250
Uncabled receptacles and adapters ........................................................ N/A
Insertion Loss: (dB maximum, tested at 4 GHz)
Straight cable connectors .................................................................. 0.25 dB
Right angle cable connectors ............................................................ 0.50 dB
Uncabled receptacles and adapters ........................................................ N/A
Insulation Resistance: 1000 megohms minimum
Contact Resistance: (milliohms maximum)
After
Initial
Environmental
Center contact (straight cabled
connectors and uncabled receptacles) .............. 6.0
8.0
Center contact (right angle cabled
connectors and adapters) ................................ 12.0
16.0
Outer contact (gold plated connectors) ................. 1.0
N/A
Outer contact (nickel plated connectors) .............. 2.5
N/A
Braid to body (gold plated connectors) ................. 1.0
N/A
Braid to body (nickel plated connectors) ............... 2.5
N/A
RF Leakage: (dB minimum tested at 2.5 GHz)
Cable connectors ............................................................................... -55 dB
Uncabled receptacles and adapters ........................................................ N/A
** All gold plated parts inlcude a .00005" min. nickel underplate barrier layer.
RF High Potential Withstanding Voltage: (Vrms minimum, tested at
4 and 7 MHz)✝
Connectors for RG-178 ........................................................................... 500
Connectors for RG-316 ........................................................................... 700
Uncabled receptacles and adapters ........................................................ 600
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMC
Engagement/Disengagment Force: 16 inch-ounce maximum torque
Mating Torque: 35 to 50 inch-ounce
Coupling Proof Torque: 100 inch-ounce minimum
Coupling Nut Retention: 35 pounds minimum
Contact Retention: 4 lbs. minimum axial force (captivated contacts)
1 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-178 ...................................... 10
N/A
Connectors for RG-316 ...................................... 20
N/A
Connectors for .086 semi-rigid ........................... 30
16
* or cable breaking strength whichever is less
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of
MIL-C-39012
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-210, Method 213, Condition C
Vibration: MIL-STD-202, Method 204, Condition D
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated** per MIL-G-45204 .00001" min or
nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204
.00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204
.00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533, unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) per QQ-B-750, gold plated per MIL-G-45204 .00001" min. or
nickel plated per QQ-N-290
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
MATING ENGAGEMENT FOR SMC SERIES PER MIL-C-39012
PLUG
PLUG
2
JACK
JACK
NOTES
1. Inside of contact to meet VSWR, mating characteristics and connector durability when mated with
a dia .019/.021 (0.48/0.53) male contact.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMC - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Plug Receptacle
GOLD PLATED
NICKEL PLATED
131-6801-201
131-6801-206
Straight Jack Receptacle
"A"
GOLD
PLATED
NICKEL
PLATED
.155 (3.94)
131-6701-201 131-6701-206
.110 (2.79)
131-6701-211 131-6701-216
IR
COMPATIBLE*
131-6701-215*
*Tin/Lead Solder dipped legs for IR Reflow Compatibility.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
SMC - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Jack Receptacle - Surface Mount
GOLD PLATED
NICKEL PLATED
131-6711-201
131-6711-205
Connector Mounting Pads 60%/40% Tin/Lead Coated (Solder Plated)
Right Angle Jack Receptacle
GOLD PLATED
131-6701-301
4
NICKEL PLATED
131-6701-306
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMC - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
PC Mount
Right Angle Jack Receptacle - Moisture Seal*
NICKEL BODY, GOLD INTERFACE,
IR COMPATIBLE*
131-6701-315*
*Tin/Lead Solder dipped legs and Moisture Sealed for IR reflow compatibility.
Right Angle Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-6701-341
131-6701-346
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
SMC - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
End Launch Jack Receptacle - Round Contact
BOARD
THICKNESS
GOLD
PLATED
NICKEL
PLATED
"A"
"B"
.073 (1.85)
.093 (2.36)
.062 (1.57)
131-6701-801
131-6701-806
.068 (1.73)
.042 (1.07)
131-6701-821
131-6701-826
.048 (1.22)
End Launch Jack Receptacle - Tab Contact
BOARD
THICKNESS
.062 (1.57)
6
GOLD
PLATED
131-6701-831
NICKEL
PLATED
"A"
131-6701-836
.068 (1.73)
"B"
.083 (2.11)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMC - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Bulkhead and Panel Mount
Front Mount Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-6701-411
131-6701-416
Rear Mount Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-6701-401
131-6701-406
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
7
SMC - 50 Ohm Connectors
Bulkhead and Panel Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
2-Hole Flange Mount Jack Receptacle
GOLD PLATED
NICKEL PLATED
131-6701-621
131-6701-626
4-Hole Flange Mount Jack Receptacle
8
GOLD PLATED
NICKEL PLATED
131-6701-631
131-6701-636
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMC - 50 Ohm Connectors
Alphabetical Index
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
131-6901-801 3
131-6901-806 3
Jack to Jack 3
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
SMC - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedence: 50 ohms
Frequency Range: 0-10 GHz
VSWR: (f = GHz)
Straight Cabled
RG-178 cable ................................... 1.25 + .04f
RG-316 and .086 semi-rigid
cable ............................................. 1.20 + .04f
Uncabled receptacles ............................ N/A
Adapters ........................................... 1.20 + .04f
Right Angle Cabled
1.40 + .06f
1.30 + .04f
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-178 ............................................... 250
60
RG-316, .086 semi-rigid
uncabled receptacles, adapters ........ 335
85
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 ........................................................................... 750
Connectors for RG-316, .086 semi-rigid
uncabled receptacles, adapters ........................................................... 1000
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 ........................................................................... 185
Connectors for RG-316, .086 semi-rigid .................................................. 250
Uncabled receptacles and adapters ........................................................ N/A
Insertion Loss: (dB maximum, tested at 4 GHz)
Straight cable connectors .................................................................. 0.25 dB
Right angle cable connectors ............................................................ 0.50 dB
Uncabled receptacles and adapters ........................................................ N/A
Insulation Resistance: 1000 megohms minimum
Contact Resistance: (milliohms maximum)
After
Initial
Environmental
Center contact (straight cabled
connectors and uncabled receptacles) .............. 6.0
8.0
Center contact (right angle cabled
connectors and adapters) ................................ 12.0
16.0
Outer contact (gold plated connectors) ................. 1.0
N/A
Outer contact (nickel plated connectors) .............. 2.5
N/A
Braid to body (gold plated connectors) ................. 1.0
N/A
Braid to body (nickel plated connectors) ............... 2.5
N/A
RF Leakage: (dB minimum tested at 2.5 GHz)
Cable connectors ............................................................................... -55 dB
Uncabled receptacles and adapters ........................................................ N/A
** All gold plated parts inlcude a .00005" min. nickel underplate barrier layer.
RF High Potential Withstanding Voltage: (Vrms minimum, tested at
4 and 7 MHz)✝
Connectors for RG-178 ........................................................................... 500
Connectors for RG-316 ........................................................................... 700
Uncabled receptacles and adapters ........................................................ 600
MECHANICAL RATINGS
Engagement Design: MIL-C-39012, Series SMC
Engagement/Disengagment Force: 16 inch-ounce maximum torque
Mating Torque: 35 to 50 inch-ounce
Coupling Proof Torque: 100 inch-ounce minimum
Coupling Nut Retention: 35 pounds minimum
Contact Retention: 4 lbs. minimum axial force (captivated contacts)
1 inch-ounce minimum torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-178 ...................................... 10
N/A
Connectors for RG-316 ...................................... 20
N/A
Connectors for .086 semi-rigid ........................... 30
16
* or cable breaking strength whichever is less
Durability: 500 cycles minimum
ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph of
MIL-C-39012
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition B
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-210, Method 213, Condition C
Vibration: MIL-STD-202, Method 204, Condition D
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated** per MIL-G-45204 .00001" min or
nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204
.00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G-45204
.00003" min.
Nut Retention Spring: Beryllium copper per QQ-C-533, unplated
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204 .00001"
min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) per QQ-B-750, gold plated per MIL-G-45204 .00001" min. or
nickel plated per QQ-N-290
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
MATING ENGAGEMENT FOR SMC SERIES PER MIL-C-39012
PLUG
PLUG
2
JACK
JACK
NOTES
1. Inside of contact to meet VSWR, mating characteristics and connector durability when mated with
a dia .019/.021 (0.48/0.53) male contact.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
SMC - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
In-Series Adapters
Jack to Jack
GOLD PLATED
NICKEL PLATED
131-6901-801
131-6901-806
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
MCX Connectors
Johnson Components® MCX connectors are compatible with the European
CECC 22220, series MCX, coaxial connector specification. MCX connectors
utilize a self centering retention spring which allows for snap-on mating.
Although similar to SMB connectors, MCX connectors are roughly 30%
smaller than SMBs and can be used up to 6 GHz.
MCX connectors are used in applications such as Global Positioning Systems
(GPS), automotive, cellular telephones, and data telemetry. These connectors
are well suited for applications where SMB connectors are too large.
50 Ohm MCX Bulkhead
and Panel Mount
50 Ohm MCX Cabled Connectors
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
50 Ohm MCX In-Series Adapters
50 Ohm MCX Reverse Polarity
75 Ohm MCX Connectors
The Johnson Components® 75 ohm MCX connector operates up to 6 GHz
with "true 75 ohm" impedance design and is well suited for traditional and
digital RF applications where size and weight reduction are primary concerns.
Applications for the 75 ohm MCX include automotive, cellular telephone and
data telemetry - especially video and telephony distribution nodes.
Johnson Components® carries a full line of 75 Ohm MCX connectors
including straight cabled plugs, right angle cabled plugs, straight cabled jacks
and bulkhead cabled jacks; along with straight plug receptacles and straight,
right angle, end launch and bulkhead jack receptacles.
75 Ohm Connectors
We design custom connectors. Contact your Johnson Components® sales
representative with your unique requirements.
MCX Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
133-3701-201
133-3701-206
133-3701-211
133-3701-216
133-3701-221
133-3701-226
133-3701-231
133-3701-236
133-3701-301
133-3701-306
133-3701-311
133-3701-316
133-3701-321
133-3701-326
133-3701-401
133-3701-406
133-3701-411
133-3701-416
133-3701-601
133-3701-606
133-3701-611
133-3701-616
133-3701-621
133-3701-626
133-3701-801
133-3701-806
133-3701-811
133-3701-816
3
3
3
3
3
3
4
4
5
5
5
5
5
5
7
7
7
7
7
7
7
7
7
7
6
6
6
6
Alphabetical Index
133-3711-201 4
133-3711-202 4
133-3711-207 4
133-3711-208 4
133-3711-211 4
133-3711-212 4
133-3711-217 4
133-3711-218 4
133-3711-301 5
133-3711-302 5
133-3711-307 5
133-3711-308 5
133-3711-311 6
133-3711-312 6
133-3711-317 6
133-3711-318 6
133-3801-201 3
133-3801-206 3
133-3801-211 3
133-3801-216 3
2-Hole Flange Mount Jack Receptacle - Extended 7
2-Hole Flange Mount Jack Receptacle - Flush 7
End Launch Jack Receptacle - Round Contact 6
Front Mount Bulkhead Jack Receptacle 7
Right Angle Jack Receptacle 5
Right Angle Jack Receptacle - Surface Mount 5, 6
Specifications 2
Straight Jack Receptacle 3
Straight Jack Receptacle - .100" Layout 4
Straight Jack Receptacle - Surface Mount 4
Straight Plug Receptacle 3
Straight Plug Receptacle - Low Profile 3
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
MCX - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 Ohms
Frequency Range: Connectors .............................................. 0-6 GHz
Dummy loads .......................................... 0-1 GHz
VSWR: (f = GHz)
Straight Cabled
Right Angle
Connectors Cabled Connectors
RG-178 cable ................................... 1.17 + .04f
1.07 + .06f
RG-316 and .086 semi-rigid cable ... 1.13 + .04f
1.07 + .04f
Adapters .............................................................................. 1.13 + .04f
Uncabled receptacles, Dummy loads ............................................ N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-178 ................................................... 250
65
RG-316, .086 semi-rigid uncabled
uncabled receptacles, adapters ............ 335
85
Dummy loads ............................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 .............................................................. 750
Connectors for RG-316, .086 semi-rigid,
uncabled receptacles, adapters ............................................ 1000
Dummy loads ............................................................................. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 .............................................................. 190
Connectors for RG-316, .086 semi-rigid
uncabled receptacles, adapters .............................................. 250
Dummy loads ............................................................................. N/A
Insertion Loss: (dB maximum, tested at 1 GHz)
Straight cable connectors and adapters ................................. 0.1 dB
Right angle cable connectors ................................................. 0.2 dB
Uncabled receptacles, dummy loads ......................................... N/A
Insulation Resistance: 1000 megohms minimum
After
Contact Resistance: (milliohms maximum)
Initial Environmental
Center contact (straight cabled connectors,
uncabled receptacles and adapters) ................. 5.0
8.0
Center contact (right angle cabled connectors) .... 5.0
15.0
Outer contact ........................................................ 1.0
1.5
Braid to body (gold plated connectors) ................. 1.0
N/A
Braid to body (nickel plated connectors) ...............2.5
N/A
RF Leakage: (dB typical tested at 2.5 GHz)
Cable connectors ....................................................... -60 dB typical
Uncabled receptacles and adapters, dummy loads ................... N/A
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 .............................................................. 500
Connectors for RG-316 and adapters ........................................ 700
.086 semi-rigid ............................................................................ 670
Uncabled receptacles ................................................................. 600
Dummy loads ............................................................................. N/A
Power Rating (Dummy Load): 0.5 watt @ +25oC, derated to 0.25 watt
@ +125o C
MECHANICAL RATINGS
Engagement Design: Compatible with CECC 22220, Series MCX
Engagement Force: 5.6 pounds maximum axial force
Disengagement Force: 3 pounds typical axial force, 1 pound min.
Contact Retention: 2.3 pounds min. axial force (captivated contacts)
1 inch-ounce min. torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-178 ............................... 10
N/A
Connectors for RG-316 ............................... 20
N/A
Connectors for RG-316DS .......................... 25
N/A
Connectors for .086 semi-rigid .................... 30
16
* or cable breaking strength whichever is less.
ENVIRONMENTAL RATINGS (Meets or exceed the applicable
paragraph of MIL-C-39012)Durability: 500 cycles minimum
Temperature Range:Connectors ............................... - 65oC to + 165oC
Dummy loads .......................... - 65oC to + 125oC
Thermal Shock: MIL-STD-202, Method 107, Condition F (N/A dummy
loads)
Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads)
Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads)
Vibration: MIL-STD-202, Method 204, Condition B (N/A dummy loads)
Moisture Resistance: MIL-STD-202, Method 106 (N/A dummy loads)
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated**
per MIL-G-45204 .00001” min or nickel plated per QQ-N-290 or
bright tin plated
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204
.00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G45204 .00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
MATING ENGAGEMENT FOR MCX SERIES COMPATIBLE WITH CECC 22220
JACK
JACK
2
PLUG
PLUG
NOTES
1. ID of contact to meet VSWR mating characteristics and connector
durability when mated with a dia. .019-.021 (0.48-0.53) male contact.
2. Must meet the force to engage and disengage when mated with
mating part.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MCX - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Plug Receptacle
GOLD PLATED
NICKEL PLATED
133-3801-201
133-3801-206
Straight Plug Receptacle - Low Profile
GOLD PLATED
133-3801-211
NICKEL PLATED
133-3801-216
Straight Jack Receptacle
DIMENSION "A"
GOLD PLATED
NICKEL PLATED
.155 (3.94)
133-3701-201
133-3701-206
.110 (2.79)
133-3701-211
133-3701-216
.068 (1.73)
133-3701-221
133-3701-226
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
MCX - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Jack Receptacle - .100" Layout
GOLD PLATED
133-3701-231
NICKEL PLATED
133-3701-236
Straight Jack Receptacle - Surface Mount
GOLD PLATED
TIN PLATED
PACKAGING
133-3711-201
133-3711-207
STOCK
133-3711-202
133-3711-208
TAPE AND REEL
750 pcs/reel
Straight Jack Receptacle - Surface Mount
GOLD PLATED
4
TIN PLATED
PACKAGING
133-3711-211
133-3711-217
STOCK
133-3711-212
133-3711-218
TAPE AND REEL
750 pcs/reel
Tape and Reel .472 (12.0) component pitch X .630 (16.0) wide.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MCX - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Jack Receptacle
"A"
GOLD PLATED
NICKEL PLATED
.155 (3.94)
133-3701-301
133-3701-306
.110 (2.79)
133-3701-311
133-3701-316
.068 (1.73)
133-3701-321
133-3701-326
Right Angle Jack Receptacle - Surface Mount
GOLD PLATED
TIN PLATED
PACKAGING
133-3711-301
133-3711-307
STOCK
133-3711-302
133-3711-308
TAPE AND REEL
750 pcs/reel
Tape and Reel .472 (12.0) component pitch X .945 (24.0) wide.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
MCX - 50 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Jack Receptacle - Surface Mount
GOLD PLATED
TIN PLATED
PACKAGING
133-3711-311
133-3711-317
STOCK
133-3711-312
133-3711-318
TAPE AND REEL
750 pcs/reel
Tape and Reel .472 (12.0) component pitch X .945 (24.0) wide.
End Launch Jack Receptacle - Round Contact
6
BOARD THICKNESS
GOLD PLATED
NICKEL PLATED
"A"
"B"
.062 (1.57)
133-3701-801
133-3701-806
.068 (1.73)
.048 (1.22)
.042 (1.07)
133-3701-811
133-3701-816
.048 (1.22)
.068 (1.73)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MCX - 50 Ohm Connectors
Bulkhead and Panel Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Front Mount Bulkhead Jack Receptacle
Figure 1
GOLD PLATED
NICKEL PLATED
MOUNTING STYLE
FIG.
133-3701-401
133-3701-406
D Flat Threaded
1
133-3701-411
133-3701-416
Press Fit Knurl
2
Figure 2
2-Hole Flange Mount Jack Receptacle - Flush Dielectric
GOLD PLATED
133-3701-601
NICKEL PLATED
133-3701-606
2-Hole Flange Mount Jack Receptacle - Extended Dielectric
"A"
"B"
GOLD PLATED
.170 (4.32)
.092 (2.34)
133-3701-611
NICKEL PLATED
133-3701-616
.300 (7.62)
.200 (5.08)
133-3701-621
133-3701-626
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
7
MCX Connectors
Alphabetical Index
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
133-3302-001 5
133-3302-006 5
133-3302-401 5
133-3302-406 5
133-3303-001 5
133-3303-006 5
133-3303-401 5
133-3303-406 5
133-3304-001 5
133-3304-006 5
133-3304-401 5
133-3304-406 5
133-3402-001 4
133-3402-006 4
133-3402-101 4
133-3402-106 4
133-3403-001 4
133-3403-006 4
133-3403-101 4
133-3403-106 4
133-3404-001 4
133-3404-006 4
133-3404-101 4
133-3404-106 4
133-3407-101 4
133-3407-106 4
133-3433-001 4
133-3433-006 4
133-3433-101 4
133-3433-106 4
133-3693-001 3
133-3693-006 3
133-3693-101 3
133-3693-106 3
Right Angle Crimp Type Plug 4
Right Angle Solder Type Plug 3
Specifications 2
Straight Crimp Type Bulkhead Jack 5
Straight Crimp Type Jack 5
Straight Crimp Type Plug 4
Straight Solder Type Plug 3
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
MCX - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 Ohms
Frequency Range: Connectors .............................................. 0-6 GHz
Dummy loads .......................................... 0-1 GHz
VSWR: (f = GHz)
Straight Cabled
Right Angle
Connectors Cabled Connectors
RG-178 cable ................................... 1.17 + .04f
1.07 + .06f
RG-316 and .086 semi-rigid cable ... 1.13 + .04f
1.07 + .04f
Adapters .............................................................................. 1.13 + .04f
Uncabled receptacles, Dummy loads ............................................ N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-178 ................................................... 250
65
RG-316, .086 semi-rigid uncabled
uncabled receptacles, adapters ............ 335
85
Dummy loads ............................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 .............................................................. 750
Connectors for RG-316, .086 semi-rigid,
uncabled receptacles, adapters ............................................ 1000
Dummy loads ............................................................................. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 .............................................................. 190
Connectors for RG-316, .086 semi-rigid
uncabled receptacles, adapters .............................................. 250
Dummy loads ............................................................................. N/A
Insertion Loss: (dB maximum, tested at 1 GHz)
Straight cable connectors and adapters ................................. 0.1 dB
Right angle cable connectors ................................................. 0.2 dB
Uncabled receptacles, dummy loads ......................................... N/A
Insulation Resistance: 1000 megohms minimum
After
Contact Resistance: (milliohms maximum)
Initial Environmental
Center contact (straight cabled connectors,
uncabled receptacles and adapters) ................. 5.0
8.0
Center contact (right angle cabled connectors) .... 5.0
15.0
Outer contact ........................................................ 1.0
1.5
Braid to body (gold plated connectors) ................. 1.0
N/A
Braid to body (nickel plated connectors) ...............2.5
N/A
RF Leakage: (dB typical tested at 2.5 GHz)
Cable connectors ....................................................... -60 dB typical
Uncabled receptacles and adapters, dummy loads ................... N/A
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 .............................................................. 500
Connectors for RG-316 and adapters ........................................ 700
.086 semi-rigid ............................................................................ 670
Uncabled receptacles ................................................................. 600
Dummy loads ............................................................................. N/A
Power Rating (Dummy Load): 0.5 watt @ +25oC, derated to 0.25 watt
@ +125o C
MECHANICAL RATINGS
Engagement Design: Compatible with CECC 22220, Series MCX
Engagement Force: 5.6 pounds maximum axial force
Disengagement Force: 3 pounds typical axial force, 1 pound min.
Contact Retention: 2.3 pounds min. axial force (captivated contacts)
1 inch-ounce min. torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-178 ............................... 10
N/A
Connectors for RG-316 ............................... 20
N/A
Connectors for RG-316DS .......................... 25
N/A
Connectors for .086 semi-rigid .................... 30
16
* or cable breaking strength whichever is less.
ENVIRONMENTAL RATINGS (Meets or exceed the applicable
paragraph of MIL-C-39012)Durability: 500 cycles minimum
Temperature Range:Connectors ............................... - 65oC to + 165oC
Dummy loads .......................... - 65oC to + 125oC
Thermal Shock: MIL-STD-202, Method 107, Condition F (N/A dummy
loads)
Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads)
Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads)
Vibration: MIL-STD-202, Method 204, Condition B (N/A dummy loads)
Moisture Resistance: MIL-STD-202, Method 106 (N/A dummy loads)
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated**
per MIL-G-45204 .00001” min or nickel plated per QQ-N-290 or
bright tin plated
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204
.00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G45204 .00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
MATING ENGAGEMENT FOR MCX SERIES COMPATIBLE WITH CECC 22220
JACK
JACK
2
PLUG
PLUG
NOTES
1. ID of contact to meet VSWR mating characteristics and connector
durability when mated with a dia. .019-.021 (0.48-0.53) male contact.
2. Must meet the force to engage and disengage when mated with
mating part.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MCX - 50 Ohm Connectors
For Semi-Rigid Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Solder Type Plug
CABLE TYPE
GOLD PLATED
NICKEL PLATED
.086 Semi-rigid
133-3693-001
133-3693-006
Right Angle Solder Type Plug - Captivated Contact
CABLE TYPE
GOLD PLATED
NICKEL PLATED
.086 Semi-rigid
133-3693-101
133-3693-106
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
MCX - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug - Solder or Crimp Contact
CABLE TYPE
GOLD PLATED
NICKEL PLATED
CAPTIVATED CONTACT
RG-178/U, 196
133-3402-001
133-3402-006
NO
RG-188/U, 316,
161, 174
133-3403-001
133-3403-006
YES
RG-188 DS, RG-316 DS
133-3404-001
133-3404-006
YES
RG-179/U, 187
133-3433-001
133-3433-006
YES
Right Angle Crimp Type Plug - Captivated Contact
Figure 1
Figure 2
4
CABLE TYPE
GOLD PLATED
NICKEL PLATED
FIG.
RG-178/U, 196
133-3402-101
133-3402-106
1
RG-188/U, 316,
161, 174
133-3403-101
133-3403-106
1
RG-188 DS, RG-316 DS
133-3404-101
133-3404-106
1
RG-58/U, 303, 141
133-3407-101
133-3407-106
2
RG-179/U, 187
133-3433-101
133-3433-106
1
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MCX - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Jack - Solder or Crimp Contact
CABLE TYPE
GOLD PLATED
NICKEL PLATED
CAPTIVATED CONTACT
RG-178/U, 196
133-3302-001
133-3302-006
NO
RG-188/U, 316,
161, 174, 179, 187
133-3303-001
133-3303-006
YES
RG-188 DS, RG-316 DS
133-3304-001
133-3304-006
YES
Straight Crimp Type Bulkhead Jack Solder or Crimp Contact
CABLE TYPE
GOLD PLATED
NICKEL PLATED
CAPTIVATED CONTACT
RG-178/U, 196
133-3302-401
133-3302-406
NO
RG-188/U, 316,
161, 174, 179, 187
133-3303-401
133-3303-406
YES
RG-188 DS, RG-316 DS
133-3304-401
133-3304-406
YES
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
MCX Connectors
Alphabetical Index
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
133-3801-801 3
133-3801-806 3
133-3801-821 3
133-3801-826 3
133-3901-401 3
133-3901-406 3
133-3901-801 3
133-3901-806 3
Jack to Bulkhead Jack Adapter 3
Jack to Jack Adapter 3
Plug Dummy Load 3
Specifications 2
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
MCX - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 Ohms
Frequency Range: Connectors .............................................. 0-6 GHz
Dummy loads .......................................... 0-1 GHz
VSWR: (f = GHz)
Straight Cabled
Right Angle
Connectors Cabled Connectors
RG-178 cable ................................... 1.17 + .04f
1.07 + .06f
RG-316 and .086 semi-rigid cable ... 1.13 + .04f
1.07 + .04f
Adapters .............................................................................. 1.13 + .04f
Uncabled receptacles, Dummy loads ............................................ N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-178 ................................................... 250
65
RG-316, .086 semi-rigid uncabled
uncabled receptacles, adapters ............ 335
85
Dummy loads ............................................................................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 .............................................................. 750
Connectors for RG-316, .086 semi-rigid,
uncabled receptacles, adapters ............................................ 1000
Dummy loads ............................................................................. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 .............................................................. 190
Connectors for RG-316, .086 semi-rigid
uncabled receptacles, adapters .............................................. 250
Dummy loads ............................................................................. N/A
Insertion Loss: (dB maximum, tested at 1 GHz)
Straight cable connectors and adapters ................................. 0.1 dB
Right angle cable connectors ................................................. 0.2 dB
Uncabled receptacles, dummy loads ......................................... N/A
Insulation Resistance: 1000 megohms minimum
After
Contact Resistance: (milliohms maximum)
Initial Environmental
Center contact (straight cabled connectors,
uncabled receptacles and adapters) ................. 5.0
8.0
Center contact (right angle cabled connectors) .... 5.0
15.0
Outer contact ........................................................ 1.0
1.5
Braid to body (gold plated connectors) ................. 1.0
N/A
Braid to body (nickel plated connectors) ...............2.5
N/A
RF Leakage: (dB typical tested at 2.5 GHz)
Cable connectors ....................................................... -60 dB typical
Uncabled receptacles and adapters, dummy loads ................... N/A
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4
and 7 MHz)✝
Connectors for RG-178 .............................................................. 500
Connectors for RG-316 and adapters ........................................ 700
.086 semi-rigid ............................................................................ 670
Uncabled receptacles ................................................................. 600
Dummy loads ............................................................................. N/A
Power Rating (Dummy Load): 0.5 watt @ +25oC, derated to 0.25 watt
@ +125o C
MECHANICAL RATINGS
Engagement Design: Compatible with CECC 22220, Series MCX
Engagement Force: 5.6 pounds maximum axial force
Disengagement Force: 3 pounds typical axial force, 1 pound min.
Contact Retention: 2.3 pounds min. axial force (captivated contacts)
1 inch-ounce min. torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-178 ............................... 10
N/A
Connectors for RG-316 ............................... 20
N/A
Connectors for RG-316DS .......................... 25
N/A
Connectors for .086 semi-rigid .................... 30
16
* or cable breaking strength whichever is less.
ENVIRONMENTAL RATINGS (Meets or exceed the applicable
paragraph of MIL-C-39012)Durability: 500 cycles minimum
Temperature Range:Connectors ............................... - 65oC to + 165oC
Dummy loads .......................... - 65oC to + 125oC
Thermal Shock: MIL-STD-202, Method 107, Condition F (N/A dummy
loads)
Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads)
Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads)
Vibration: MIL-STD-202, Method 204, Condition B (N/A dummy loads)
Moisture Resistance: MIL-STD-202, Method 106 (N/A dummy loads)
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated**
per MIL-G-45204 .00001” min or nickel plated per QQ-N-290 or
bright tin plated
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204
.00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G45204 .00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
MATING ENGAGEMENT FOR MCX SERIES COMPATIBLE WITH CECC 22220
JACK
JACK
2
PLUG
PLUG
NOTES
1. ID of contact to meet VSWR mating characteristics and connector
durability when mated with a dia. .019-.021 (0.48-0.53) male contact.
2. Must meet the force to engage and disengage when mated with
mating part.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Reverse Polarity
MCX Connectors
133-5302-401 3
133-5302-406 3
133-5303-401 3
133-5303-406 3
133-5304-401 3
133-5304-406 3
133-5402-001 3
133-5402-006 3
133-5402-101 3
133-5402-106 3
133-5403-001 3
133-5403-006 3
133-5403-101 3
133-5403-106 3
133-5404-001 3
133-5404-006 3
133-5404-101 3
133-5404-106 3
133-5701-201 4
133-5701-206 4
133-5701-501 4
133-5701-506 4
133-5701-801 4
133-5701-806 4
Bulkhead Jack Receptacle - Solder or Crimp Contact 3
End Launch Bulkhead Jack Receptacle - Round Contact 4
Right Angle Bulkhead Jack Receptacle 4
Right Angle Crimp Type Plug - Captivated Contact 3
Specifications 2
Straight Crimp Type Plug - Solder or Crimp Contact 3
Straight Jack Receptacle 4
FCC regulation (Part 15.203) stipulates that wireless devices with removable antennas require a nonstandard antenna connection to the hand-held device. To meet this requirement, Johnson Components®
designs and manufactures non-standard mating MCX connectors.
Reverse Polarity:
Reverse polarity connectors employ female contacts in the plug connector and male contacts in the jack
connector. Johnson Components® manufactures straight and right angle cabled plugs and bulkhead
jacks; along with straight and right angle bulkhead jack receptacles and an end launch jack receptacle in
the reverse polarity style.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
MCX Reverse Polarity- 50 Ohm
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 Ohms
Frequency Range: 0-6 GHz
VSWR: (f = GHz)
Straight Cabled
Right Angle
Connectors
Cabled Connectors
RG-178 cable ............................... 1.17 + .04f
1.07 + .06f
RG-316 cable .............................. 1.13 + .04f
1.07 + .04f
Uncabled receptacles .................................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-178 ................................................... 250
65
RG-316 uncabled receptacles ................ 335
85
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-178 .............................................................. 750
Connectors for RG-316 uncabled receptacles ......................... 1000
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-178 .............................................................. 190
Connectors for RG-316 uncabled receptacles ........................... 250
Insertion Loss: (dB maximum, tested at 1 GHz)
Straight cable connectors ....................................................... 0.1 dB
Right angle cable connectors ................................................. 0.2 dB
Uncabled receptacles ................................................................. N/A
Insulation Resistance: 10000 megohms minimum
After
Contact Resistance: (milliohms maximum)
Initial Environmental
Center contact (straight cabled connectors,
uncabled receptacles) ....................................... 5.0
8.0
Center contact (right angle cabled connectors) .... 5.0
15.0
Outer contact ........................................................ 1.0
1.5
Braid to body (gold plated connectors) ................. 1.0
N/A
Braid to body (nickel plated connectors) ............... 2.5
N/A
RF Leakage: (dB typical tested at 2.5 GHz)
Cable connectors .................................................................. -70 dB
Uncabled receptacles ................................................................. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at
4 and 7 MHz)✝
Connectors for RG-178 .............................................................. 500
Connectors for RG-316 .............................................................. 700
Uncabled receptacles ................................................................. 600
MECHANICAL RATINGS
Engagement Force: 5.6 pounds maximum axial force
Disengagement Force: 3 pounds typical axial force, 1.0 pound min.
Contact Retention: 4 lbs. min. axial force (captivated contacts)
1 inch-ounce min. torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-178 ............................... 10
N/A
Connectors for RG-316 ............................... 20
N/A
Connectors for RG-316DS .......................... 25
N/A
* or cable breaking strength whichever is less.
ENVIRONMENTAL RATINGS (Meets or exceed the applicable
paragraph of MIL-C-39012)
Durability: 500 cycles minimum
Temperature Range: - 65oC to + 165oC
Thermal Shock: MIL-STD-202, Method 107, Condition F
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition B
Vibration: MIL-STD-202, Method 204, Condition B
Moisture Resistance: MIL-STD-202, Method 106
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626 or zinc per ASTM B86-71, gold plated**
per MIL-G-45204 .00001” min or nickel plated per QQ-N-290
Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204
.00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G45204 .00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204
.00001" min. or nickel plated per QQ-N-290
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min.
or nickel plated per QQ-N-290
MATING ENGAGEMENT FOR MCX REVERSE POLARITY SERIES
PER FCC RULE 15 NON-STANDARD INTERFACE
JACK
PLUG
JACK
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
2
PLUG
NOTES
1. ID of contact to meet VSWR mating characteristics and connector
durability when mated with a dia. .019-.021 (0.48-0.53) male contact.
2. Must meet the force to engage and disengage when mated with
mating part.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MCX Reverse Polarity - 50 Ohm
Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug - Solder or Crimp Contact
Reverse
Polarity
CABLE TYPE
RG 178/U, 196
RG 316/U, 188, 161, 174
GOLD PLATED
133-5402-001
133-5403-001
NICKEL PLATED
133-5402-006
133-5403-006
CAPTIVATED CONTACT
No
Yes
RG 316 DS, 188DS
133-5404-001
133-5404-006
Yes
Right Angle Crimp Type Plug - Captivated Contact
Reverse
Polarity
CABLE TYPE
RG 178/U, 196
RG 316/U, 188, 161, 174
RG 316 DS, 188DS
GOLD PLATED
133-5402-101
133-5403-101
133-5404-101
NICKEL PLATED
133-5402-106
133-5403-106
133-5404-106
Bulkhead Jack Receptacle - Solder or Crimp Contact
Reverse
Polarity
CABLE TYPE
RG 178/U, 196
GOLD PLATED
133-5302-401
RG 316/U, 188, 161, 174
RG 316 DS, 188DS
133-5303-401
133-5304-401
NICKEL PLATED
133-5302-406
133-5303-406
133-5304-406
CAPTIVATED CONTACT
No
Yes
Yes
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
MCX Reverse Polarity- 50 Ohm
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Jack Receptacle
GOLD PLATED
NICKEL PLATED
133-5701-201
133-5701-206
Right Angle Bulkhead Jack Receptacle
GOLD PLATED
NICKEL PLATED
133-5701-501
133-5701-506
End Launch Bulkhead Jack Receptacle - Round Contact
4
GOLD PLATED
NICKEL PLATED
BOARD THICKNESS
133-5701-801
133-5701-806
.062 (1.57)
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MCX - 50 Ohm Connectors
In-Series Adapters and Terminations
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Jack to Jack Adapter
GOLD PLATED
NICKEL PLATED
133-3901-801
133-3901-806
Jack to Bulkhead Jack Adapter
GOLD PLATED
133-3901-401
NICKEL PLATED
133-3901-406
Plug Dummy Load
NEW
FREQ. RANGE
GOLD PLATED
NICKEL PLATED
RESISTANCE
0-1 GHz
133-3801-801
133-3801-806
50 Ohm
0-1 GHz
133-3801-821
133-3801-826
75 Ohm
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
MCX - 75 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
133-8333-001 4
133-8333-401 4
133-8334-001 4
133-8334-401 4
133-8433-001 3
133-8433-101 3
133-8434-001 3
133-8445-001* 3
133-8445-101* 3
133-8701-201 5
133-8701-211 5
133-8701-301 6
133-8701-311 6
133-8701-401 6
133-8701-801
133-8701-831
133-8711-201
133-8711-202
133-8711-207
133-8711-208
133-8801-201
133-8801-211
133-8901-801
133-8901-811
133-8901-821
134-1068-021
134-1068-031
134-1089-001
6
7
5
5
5
5
5
5
7
7
7
8
8
8
Adapters
Type N Jack to 75 Ohm MCX Jack 8
Type N Jack to 75 Ohm MCX Plug 8
Type N Plug to 75 Ohm MCX Jack 8
Type N Plug to 75 Ohm MCX Plug 8
Between-Series Matching Pad 50 Ohm MCX Bulkhead Jack 8
Jack to Jack 7
Jack to Plug 7
Plug to Plug 7
Bulkhead Jack Receptacle 6
End Launch Jack Receptacle 6
Jack Precision Load 7
Right Angle Crimp Type Plug - 3
Right Angle Jack Receptacle 6
Specifications 2
Straight Crimp Type Bulkhead Jack 4
Straight Crimp Type Jack 4
Straight Crimp Type Plug 3
Straight Jack Receptacle 5
Straight Plug Receptacle 5
Surface Mount Jack Receptacle 5
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
MCX - 75 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Power Rating: (Loads and matching pad only) 1.0 watt at +25oC derated
linearly to 0.5 watt at +125oC
ELECTRICAL RATINGS
Impedance: 75 Ohms
Frequency Range: 0-6 GHz
VSWR: (f = GHz)
Straight Cabled
Right Angle
Connectors
Cabled Connectors
RG-179 cable ............................... 1.13 + .04f
1.07 + .04f
In-series adapters ........................ 1.07 + .03f
Between series adapters, loads ... 1.05 + .01f
Matching pad ............................... 1.05 + .05f
Uncabled receptacles ..................................................................... N/A
Working Voltage: (Vrms maximum)✝
Connectors for Cable Type
Sea Level
70K Feet
RG-179 ................................................... 335
85
Uncabled receptacles, adapters ............. 335
85
Loads, matching pad .............................. N/A
Dielectric Withstanding Voltage: (VRMS minimum at sea level)✝
Connectors for RG-179 ............................................................ 1000
Uncabled receptacles, adapters ............................................... 1000
Loads, matching pad .................................................................. N/A
Corona Level: (Volts minimum at 70,000 feet)✝
Connectors for RG-179 .............................................................. 250
Uncabled receptacles, adapters ................................................. 250
Loads, matching pad .................................................................. N/A
Insertion Loss: (dB maximum, tested at 1 GHz)
Straight cable connectors ....................................................... 0.1 dB
Right angle cable connectors ................................................. 0.2 dB
Uncabled receptacles, adapters, matching pad ......................... N/A
Insulation Resistance: 1000 megohms minimum
After
Contact Resistance: (milliohms maximum)
Initial Environmental
Center contact (straight cabled connectors,
uncabled receptacles) ....................................... 5.0
8.0
Center contact (right angle cabled connectors) .... 5.0
15.0
Center contact (loads, matching pads) ................ N/A
Outer contact ........................................................ 1.0
1.5
Braid to body (gold plated connectors) ................. 1.0
N/A
RF Leakage: (dB typical tested at 2.5 GHz)
Cable connectors ....................................................... -55 dB typical
Uncabled receptacles, adapters, loads, matching pads ............. N/A
RF High Potential Withstanding Voltage: (Vrms minimum, tested at
4 and 7 MHz)✝
Connectors for RG-179 .............................................................. 700
Uncabled receptacles, adapters ................................................. 600
Loads, matching pad .................................................................. N/A
MECHANICAL RATINGS
Engagement Design: Compatible with CECC 22220, Series MCX 50
Ohm
Engagement Force: 5.6 pounds maximum axial force
Disengagement Force: 3 pounds typical axial force, 1 pound min.
Contact Retention: 2.3 pounds min. axial force (captivated contacts)
1 inch-ounce min. torque (uncabled receptacles)
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for RG-179 ............................... 20
N/A
Connectors for RG179 DS .......................... 25
N/A
*or cable breaking strength whichever is less
ENVIRONMENTAL RATINGS (Meets or exceed the applicable
paragraph of MIL-C-39012)
Durability: 500 cycles minimum
Temperature Range: All connectors: - 65oC to + 165oC
Loads and matching pads: - 65oC to + 125oC
Thermal Shock: MIL-STD-202, Method 107, Condition F
Temperature Coefficient: Loads and matching pad: +/- 300ppm/oC
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition B
Vibration: MIL-STD-202, Method 204, Condition B
Moisture Resistance: MIL-STD-202, Method 106
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated** per MIL-G-45204 .00001”
min. Interface spring - beryllium copper per QQ-C-530, gold plated
per MIL-G-45204 .00003" min.
Contacts: Male - brass per QQ-B-626 or beryllium copper per QQ-C530, gold plated per MIL-G-45204 .00003" min.
Female - beryllium copper per QQ-C-530, gold plated per MIL-G45204 .00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204
.00001" min.
Crimp Sleeves: Copper per WW-T-799, gold plated per MIL-G-45204
.00001" min.
Mounting Hardware: Brass (nuts) per QQ-B-626 or phosphor bronze
(lockwashers) QQ-B-750, gold plated per MIL-G-45204 .00001" min.
✝Avoid user injury due to misapplication.
** All gold plated parts include a .00005" min. nickel underplate barrier layer.
MATING ENGAGEMENT FOR 75 OHM MCX SERIES (INTERMATABLE WITH CECC 22220 50 OHM MCX)
JACK
JACK
2
PLUG
PLUG
NOTES
1. ID of contact to meet VSWR mating characteristics and connector durability when
mated with a dia. .019-.021 (0.48-0.53) male contact.
2. Must meet the force to engage and disengage when mated with mating part.
3. Interface shall intermate with MCX 50 Ohm interface per CECC 22220.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MCX - 75 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
For Flexible Cable
Straight Crimp Type Plug Solder or Crimp Captivated Contact
CABLE TYPE
GOLD PLATED
RG-179
133-8433-001
RG-179DS
133-8434-001
Belden 735A
133-8445-001*
Assembly instructions page 147.
See page 132 for Cable Assembly Tools.
*Available September 2000.
Right Angle Crimp Type Plug - Captivated Contact
CABLE TYPE
GOLD PLATED
RG-179
133-8433-101
RG-179DS
133-8434-101
Belden 735A
133-8445-101*
Assembly instructions page 149 .
See page 132 for Cable Assembly Tools.
*Available September 2000.
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
MCX - 75 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Jack Solder or Crimp Captivated Contact
CABLE TYPE
GOLD PLATED
RG-179
133-8333-001
RG-179DS
133-8334-001
Straight Crimp Type Bulkhead Jack Solder or Crimp Captivated Contact
4
CABLE TYPE
GOLD PLATED
RG-179
133-8333-401
RG-179DS
133-8334-401
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MCX - 75 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Plug Receptacle
"A"
GOLD PLATED
.155 (3.80)
133-8801-201
.110 (2.70)
133-8801-211
Straight Jack Receptacle
"A"
GOLD PLATED
.155 (3.80)
133-8701-201
.110 (2.70)
133-8701-211
Surface Mount Jack Receptacle
NEW
GOLD PLATED
133-8711-201
133-8711-202
PACKAGING
133-8711-207
Bulk Packs
133-8711-208
Tape and Reel
750 pieces
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
MCX - 75 Ohm Connectors
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Jack Receptacle
"A"
GOLD PLATED
.155 (3.80)
133-8701-301
.110 (2.70)
133-8701-311
End Launch Jack Receptacle
GOLD PLATED
133-8701-801
Bulkhead Jack Receptacle
GOLD PLATED
133-8701-401
6
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MCX - 75 Ohm Connectors
In-Series Matched Adapters and Terminations
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Plug Precision Load
NEW
VSWR & FREQ. RANGE
GOLD PLATED
1.05 + .01f (GHz) 0-6 GHz
133-8801-831
Jack Precision Load
NEW
VSWR & FREQ. RANGE
1.05 + .01f (GHz)
0-6 GHz
GOLD PLATED
133-8701-831
Jack to Jack
NEW
GOLD PLATED
133-8901-801
Plug to Plug
NEW
GOLD PLATED
133-8901-811
Jack to Plug
NEW
GOLD PLATED
133-8901-821
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
7
MCX - 75 Ohm Connectors
In-Series Matched Adapters and Terminations
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Plug Precision Load
NEW
VSWR & FREQ. RANGE
GOLD PLATED
1.05 + .01f (GHz) 0-6 GHz
133-8801-831
Jack Precision Load
NEW
VSWR & FREQ. RANGE
1.05 + .01f (GHz)
0-6 GHz
GOLD PLATED
133-8701-831
Jack to Jack
NEW
GOLD PLATED
133-8901-801
Plug to Plug
NEW
GOLD PLATED
133-8901-811
Jack to Plug
NEW
GOLD PLATED
133-8901-821
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
7
MCX - 75 Ohm Connectors
Between-Series Adapters
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Between-Series Matching Pad
50 Ohm MCX Bulkhead Jack to 75 Ohm MCX Plug
GOLD PLATED
134-1089-001
NEW
Mounting hole layout figure 5 page 174.
75 Ohm Type N Plug to 75 Ohm MCX Plug
NEW
STAINLESS STEEL PASSIVATED
134-1068-001
75 Ohm Type N Plug to 75 Ohm MCX Jack
NEW
STAINLESS STEEL PASSIVATED
134-1068-011
75 Ohm Type N Jack to 75 Ohm MCX Plug
NEW
STAINLESS STEEL PASSIVATED
134-1068-021
75 Ohm Type N Jack to 75 Ohm MCX Jack
NEW
STAINLESS STEEL PASSIVATED
134-1068-031
8
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
TEL: 886-3-397-9900
FAX :886-3-397-9911
MMCX Connectors
The MMCX is becoming the standard connector for
cellular, telecom, wireless and PCS applications. This
market has a 29% estimated annual growth rate over
the next five years. MMCX connectors are ideal for
low profile, low frequency (0-6 GHz) requirements
(e.g.: hand held units) where PC boards are being
stacked in small enclosures. Johnson Components'
MMCX Connectors are among the smallest coaxial
connectors that can terminate to standard size coaxial
cable. Our connectors accommodate the new .047"
diameter flexible cable as well as RG178/U, 316/U,
316DS, 179/U and .086 semi-rigid cables. Center
contacts can be either crimped or soldered. The rugged
snap-on interface maintains constant mating force and
allows rotation without degradation of electrical
performance. The interface is slotless to minimize RF
Leakage. VSWR performance is rated to 6 GHz and
mating durability to 500 cycles. MMCX connectors are
also ideal where a 360 degree rotation is required on
mated parts without an intermittent signal (e.g.: micro
antenna applications).
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
MMCX Connectors
Index
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
135-3302-001 ............................ 4
135-3302-401 ............................. 4
135-3303-001 ............................ 4
135-3304-001 ............................. 4
135-3333-001 ............................. 4
135-3336-001 ............................ 4
135-3336-401 ............................ 4
135-3402-001 ............................. 4
135-3402-101 ............................ 3
135-3403-001 ............................ 4
135-3403-101 ............................ 3
135-3404-001 ............................ 4
135-3404-101 ............................ 3
135-3433-001 ............................. 4
135-3436-001 ............................. 4
135-3436-101 ............................ 3
135-3693-101 ............................. 3
135-3701-201 ............................ 5
135-3701-211 ............................ 5
135-3701-301 ............................ 5
135-3701-311 ............................ 5
135-3711-201 ............................ 5
135-3711-202 ............................ 5
135-3711-801 ............................ 6
135-3711-802 ............................ 6
135-3801-201 ............................ 6
135-3801-811 ............................ 6
End Launch Jack Receptacle - Surface Mount .. 6
For Flexible Cable ............................................... 4
For Semi-Rigid and Flexible Cable ..................... 3
PC Mount ...................................................... 5, 6
Plug Dummy Load ............................................... 6
Right Angle Crimp Type Plug ............................ 3
Right Angle Jack Receptacle ............................. 5
Right Angle Solder Type Plug............................. 3
Specifications ...................................................... 2
Straight Crimp Type Bulkhead Jack ................... 4
Straight Crimp Type Jack ................................... 4
Straight Crimp Type Plug .................................... 4
Straight Mount Jack Receptacle ........................ 5
Straight Plug Receptacle .................................... 6
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
1
MMCX - 50 Ohm Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
ELECTRICAL RATINGS
Impedance: 50 ohms
Frequency Range: Connectors ................................................ 0-6 GHz
Dummy loads ............................................ 0-1 GHz
VSWR: (f = GHz)
Straight
Right Angle
Cabled Connectors Cabled Connectors
.047 dia flexible .................................... 1.20
1.14 + .07f
RG 178, RG 316, RG 316DS ............... 1.20
1.25
.086 semi-rigid ..................................... 1.15
1.15
Uncabled receptacles, dummy loads ................................................ N/A
Working Voltage: Connectors ......................... 170 Vrms at sea level†
Dummy loads ................................................... N/A
Dielectric Withstanding Voltage: Connectors...500 Vrms at sea level†
Dummy loads ............................ N/A
Insulation Resistance: 1000 megohms min
Contact Resistance: (milliohms maximum)
After
Initial
Environmental
Center contact (straight cabled connectors
and uncabled receptacles) ...................... 5.0
8.0
Center contact (right angle cabled
connectors) .............................................. 5.0
15.0
Outer contact (all connectors) ..................... 1.0
1.5
Braid to body ............................................... 1.5
N/A
Corona Level: Connectors ..................... 190 volts min at 70,000 feet†
Dummy loads ......................................................... N/A
Insertion Loss: (dB max tested at 1 GHz)
Straight cabled connectors .............................................................. 0.1
Right angle cabled connectors ........................................................ 0.2
Uncabled receptacles, dummy loads ............................................. N/A
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors .......................................................... -60 dB
.086 semi-rigid ........................................................................... -70 dB
Dummy loads ................................................................................. N/A
RF High Potential Withstanding Voltage: (400 Vrms at 4 and 7 MHz)†
Power Rating (Dummy Load): - 0.5 watt @ +25oC, derated to 0.25
watt @ +125o C
MECHANICAL RATINGS
Engagement Design: Series MMCX
Engagement/Disengagement Force: 8 lbs. max engagement
1.4 lbs. min disengagement
Contact Retention: 2.0 lbs. minimum axial force
Cable Retention:
Axial Force*
Torque
(pounds)
(in-oz)
Connectors for .047 flexible ........................ 3.5
N/A
Connectors for RG 178 ............................... 7.0
N/A
Connectors for RG 316 .............................. 20.0
N/A
Connectors for RG 316DS ......................... 25.0
N/A
Connectors for .086 semi-rigid ................... 30.0
16
*Or cable breaking strength whichever is less.
Durability: .............................................................. 500 cycles minimum
✝Avoid user injury due to misapplication. See safety advisory definitions on page 2.
*All gold plated parts include a .00005” min nickel barrier layer.
ENVIRONMENTAL RATINGS (Meets or exceed the applicable
paragraph of MIL-C-39012)
Operating Temperature: Connectors ......................... - 65oC to + 165oC
Dummy loads .................... - 65oC to + 125oC
Thermal Shock: Connectors: MIL-STD-202, Method 107, Condition C,
except -55oC to + 155oC (N/A dummy loads)
Corrosion: MIL-STD-202, Method 101, Condition B (N/A dummy loads)
Shock: MIL-STD-202, Method 213, Condition B (N/A dummy loads)
Vibration: MIL-STD-202, Method 204, Condition D (N/A dummy loads)
Moisture Resistance: MIL-STD-202, Method 106 (N/A dummy loads)
MATERIAL SPECIFICATIONS
Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001"
min.
Contacts: Beryllium copper per QQ-C-530, gold plated* per MIL-G45204 .00003" min.
Interface Spring: Beryllium copper per QQ-C-530, gold plated* per
MIL-G-45204 .00003" min.
Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457
Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-626, gold
plated per MIL-G-45204 .00001" min.
Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated
per MIL-G-45204 .00001" min.
JACK
PLUG
Mating Engagement for MMCX
Series
1. ID of contact to meet VSWR mating
characteristics and connector durability when mated with a dia .016 +/- .001
male contact.
2. Must meet the force to engage and disengage when mated with mating part.
JACK
2
PLUG
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MMCX - 50 Ohm Connectors
For Semi-Rigid and Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Solder Type Plug - Captivated Contact
CABLE TYPE
PART NUMBER
.086 Semi-rigid
135-3693-101
Right Angle Crimp Type Plug - Captivated Contact
CABLE TYPE
.047” Diameter Flexible
Huber K01152-07
Axon P512479A
Astrolab 32018 DS
RG 178/U, 196
RG 316/U, 188, 187
179, 161, 174
RG 316 DS, RG 188DS
PART NUMBER
“A”
“B”
TERMINATION
135-3436-101
.354 (8.99)
.276 (6.98)
Crimp Insert
135-3402-101
135-3403-101
.354 (8.99)
.412 (10.46)
.276 (6.98)
.334(8.48)
Crimp Insert
Crimp Sleeve
135-3404-101
.412 (10.46)
.334 8.48)
Crimp Sleeve
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
3
MMCX - 50 Ohm Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug
Solder or Crimp Captivated Contact
CABLE TYPE
.047” Diameter Flexible
Huber K01152-07
Axon P512479A
Astrolab 32018 DS
RG 178/U, 196
RG 316/U, 188, 161, 174
RG 316 DS, 188 DS, 187 DS
RG 179/U, 187
PART NUMBER
“A”
“D”
TERMINATION
135-3436-001
.462 (11.73)
.137 (3.48)
Crimp Insert
135-3402-001
135-3403-001
135-3404-001
135-3433-001
.462 (11.73)
.509 (12.93)
.509 (12.93)
.509 (12.93)
.137 (3.48)
.173 (4.39)
.173 (4.39)
.173 (4.39)
Crimp Insert
Crimp Sleeve
Crimp Sleeve
Crimp Sleeve
Straight Crimp Type Jack
Solder or Crimp Captivated Contact
CABLE TYPE
.047” Diameter Flexible
Huber K01152-07
Axon P512479A
Astrolab 32018 DS
RG 178/U, 196
RG 316/U, 188,161, 174
RG 316 DS, 188 DS, 187 DS
RG 179/U, 187
PART NUMBER
135-3336-001
“A”
.462 (11.73)
“D”
.137 (3.48)
TERMINATION
Crimp Insert
135-3302-001
135-3303-001
135-3304-001
135-3333-001
.462 (11.73)
.545 (13.84)
.545 (13.84)
.545 (13.84)
.137 (3.48)
.173 (4.39)
.173 (4.39)
.173 (4.39)
Crimp Insert
Crimp Sleeve
Crimp Sleeve
Crimp Sleeve
Straight Crimp Type Bulkhead Jack
Solder or Crimp Captivated Contact
CABLE TYPE
.047” Diameter Flexible
Huber K01152-07
Axon P512479A
Astrolab 32018 DS
RG 178/U, 196
4
PART NUMBER
TERMINATION
135-3336-401
Crimp Insert
135-3302-401
Crimp Insert
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
MMCX - 50 Ohm Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
PC Mount
Right Angle Jack Receptacle
“L”
.115 (2.92)
.068 (1.73)
PART NUMBER
135-3701-301
135-3701-311
Straight Mount Jack Receptacle
“L”
.115 (2.92)
.068 (1.73)
PART NUMBER
135-3701-201
135-3701-211
Straight Jack Receptacle - Surface Mount
PART NUMBER
135-3711-201
135-3711-202
PACKAGING
Stock
Tape and Reel
1500 pcs/reel
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
5
MMCX - 50 Ohm Connectors
PC Mount and Termination
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Plug Receptacle
PART NUMBER
135-3801-201
End Launch Jack Receptacle - Surface Mount
PART NUMBER
135-3711-801
135-3711-802
PACKAGING
Stock
Tape and Reel
1000pcs/reel
Recommended Land Pattern and Board Notch figure 14 page 175.
Plug Dummy Load
NEW
FREQ. RANGE
0-1 GHZ
6
PART NUMBER
135-3801-811
PLATING
Gold
RESISTANCE
50 Ohms
Johnson Components® • P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-835-6287 • www.johnsoncomp.com
TEL: 886-3-397-9900
FAX :886-3-397-9911
50 Ohm BNC
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
75 Ohm BNC
50 OhmCabled Connectors
75 OhmCabled Connectors
50 OhmBulkhead and Panel Mount
75 OhmBulkhead and Panel Mount
50 Ohm Adapters/Terminations
75 Ohm Adapters/Terminations
TRUE 75 Ohm BNC
TRUE 75 OhmCabled Connectors
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
TRUE 75 Ohm In-Series Adapters
TRUE 75 Ohm Between-Series Adapters
http://www.woken.com.tw/
Commercial
Miniature Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
CP-88-1 4
CP-88-10 4
CP-88-11 4
CP-88-2 4
CP-88-3 4
CP-88-4 4
CP-88-5 4
CP-88-6 4
CP-89-1 8
CP-89-10 8
CP-89-11 8
CP-89-19BM1 7
CP-89-19BM2 7
CP-89-1BM2 7
CP-89-2 8
CP-89-27BM2 7
CP-89-3 8
CP-89-4 8
CP-89-5 8
CP-89-6 8
CP-AD570 7
CP-CL88-1 5
CP-CL88-10 5
CP-CL88-2 5
CP-CL88-3 5
CP-CS88-1 5
CP-CS88-2 5
CP-SW88-1 4
CP-SW88-10 4
CP-SW88-11 4
CP-SW88-2 4
CP-sw88-21 6
CP-sw88-23 6
CPFI-RA-1 6
CPFI-RA-10 6
CPFI-RA-2 6
CPFI-RA-3 6
CPFI-RA-4 6
CPFI-RA-5 6
CPFI-SW88-1 4
CPFI-SW88-10 4
CPFI-SW88-11 4
CPFI-SW88-2 4
CPFI-UG88-1 4
CPFI-UG88-10 4
CPFI-UG88-11 4
CPFI-UG88-2 4
CPFI-UG88-3 4
CPFI-UG88-4 4
CPFI-UG88-5 4
CPFI-UG89-1 8
CPFI-UG89-10 8
CPFI-UG89-11 8
CPFI-UG89-2 8
CPFI-UG89-3 8
CPFI-UG89-4 8
CPFI-UG89-5 8
CPM-88-19 3
CPM-88-19 A/S 3
CPM-88-20 3
CPM-88-20 A/S 3
CPMC-88-1 3
CPMC-88-10 3
CPMC-88-11 3
CPMC-88-12 3
CPMC-88-13 3
CPMC-88-14 3
CPMC-88-16 3
CPMC-88-17 3
CPMC-88-18 3
CPMC-88-19 3
CPMC-88-19T 3
CPMC-88-2 3
CPMC-88-21 5
CPMC-88-22 5
CPMC-88-23 5
CPMC-88-24 3
CPMC-88-25 3
CPMC-88-26 3
CPMC-88-27 3
CPMC-88-3 3
CPMC-88-4 3
CPMC-88-5 3
Right Angle Twist-On Plug 6
Specifications* 2
Straight Clamp Plug 5
Straight Crimp Plug 6
Straight Crimp Type, Front Mount
Bulkhead Jack 7
Straight Crimp Type Jack 8
Straight Crimp Type Plug 3, 4
Straight Crimp Type, Rear Mount
Bulkhead Jack 7
Straight Twist-On Jack 8
Straight Twist-On Plug 4
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
BNC Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
The BNC series connector is a commercial quality product that intermates with all
standard double bayonet stud BNC designs. All contacts are captivated for ruggedness. The 50 ohm and 75 ohm interfaces are intermateable and provide quick,
reliable connections for instrumentation, medical and LAN applications.
Specifications*
50 Ohm BNC
Electrical Characteristics
Impedance: 50 Ohm nominal
Frequency range: 0-4 GHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Corona level: 375 volts minimum at 70,000 feet
Contact resistance: Outer - 0.2 milliohms maximum
Center - 2.1 milliohms maximum
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -55OC to +85OC
Moisture resistance: MIL-STD-202
Mechanical Characteristics
Durability: 500 cycles
Force to engage/disengage: 3 lbs. maximum
Cable retention: 20 lbs., RG-58 C/U cable
Materials
Body: Zinc or brass
Contact: Brass, beryllium copper or phosphor bronze
Spring Washer: Beryllium copper
Crimp sleeve: Brass
Insulator: Delrin® or TPX Polymethylpentene
Plating: Body - Nickel (except where noted)
Crimp sleeve - Nickel
Contact - Gold
* These values are typical and may not apply to all connectors.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 50 Ohm
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug
Solder or Crimp Contact - 3 and 4 Piece
PART NUMBER
CPMC-88-19T*
CPMC-88-19
CPMC-88-27
CPM-88-19
CPM-88-20
CPM-88-19 A/S
CPM-88-20 A/S
CABLE TYPE
RG-174, 188, 316
RG-174, 188, 316
RG-178, 196
RG-174, 188, 316
RG-179, 187
RG-174, 188, 316
RG-179, 187
“A”
1.134 (28.80)
1.142 (29.00)
0.921 (23.40)
0.932 (23.67)
0.932 (23.67)
1.272 (32.31)
1.272 (32.31)
CONTACT I.D.
BODY I.D.
FERRULE I.D.
.0245
.0165
.0245
.0165
.167
.167
.167
.167
.118
.118
.118
.118
TERMINATION
Crimp Sleeve
Crimp Sleeve
Crimp Sleeve
Crimp Insert
Crimp Insert
Extended Crimp Insert
Extended Crimp Insert
PIECES
3
3
3
4
4
4
4
*Denotes tapered crimp sleeve.
Straight Crimp Type Plug
Solder or Crimp Contact - 3 Piece
PART NUMBER
CPMC-88-1
CPMC-88-2
CPMC-88-3
CPMC-88-4
CPMC-88-5
CPMC-88-10
CPMC-88-11
CPMC-88-12
CPMC-88-13
CPMC-88-14
CPMC-88-16
CPMC-88-17
CPMC-88-18
CPMC-88-24
CPMC-88-25
CPMC-88-26
CABLE TYPE
RG-58, 141
RG-59, 62
BELDEN 8281
RG-MATV-59, 62
RG-6
RG-TFE-59, TFE-62
RG-TFE-58; RG-303
RG-122
RG-142, 223, 400, 55
RG-180, 34M, 195
Proflex, RG-450
RG-8X (MINI 8)
BELDEN 8218
BELDEN 89555
BELDEN 89907
RG-58 Thinnet
RG-11
“A”
.520 (13.20)
.520 (13.20)
.600 (15.24)
.520 (13.20)
.500 (12.70)
.520 (13.20)
.541 (13.74)
.520 (13.20)
.520 (13.20)
.520 (13.20)
.520 (13.20)
.520 (13.20)
.520 (13.20)
.520 (13.20)
“B”
.595 (15.11)
.595 (15.11)
.645 (16.38)
.595 (15.11)
.645 (16.38)
.595 (15.11)
.595 (15.11)
.595 (15.11)
.595 (15.11)
.595 (15.11)
.595 (15.11)
.595 (15.11)
.595 (15.11)
.595 (15.11)
CONTACT I.D.
.044
.034
.034
.044
.044
.0325
.044
.034
.044
.0165
.055
.065
.0245
.034
BODY I.D.
.126
.173
.208
.173
.308
.141
.126
.107
.126
.107
.173
.173
.107
.126
FERRULE I.D.
.206
.261
.344
.261
.344
.206
.192
.175
.220
.175
.261
.261
.175
.220
.520 (13.20)
.595 (15.11)
.044
.062
.107
.290
.175
.410
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
BNC Connectors - 50 Ohm
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug
Push-On Body - 2 Piece
PART
NUMBER
CP-88-1
CABLE
TYPE
RG-58
CP-88-2
CP-88-3
CP-88-4
CP-88-5
CP-88-6
CP-88-10
CP-88-11
CP-SW88-1
CP-SW88-2
CP-SW88-10
CP-SW88-11
RG-59, 62
BELDEN 8281
RG-MATV-59
RG-6
TIMES MI 2040
RG-TFE-59, TFE-62
RG-TFE-58
RG-58
RG-59, 62, RG-6TFE
RG-TFE-59AU
RG-TFE-58AU
CABLE CENTER
CONDUCTOR
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
STRANDED
STRANDED
STRANDED
STRANDED
“A”
.684 (17.37)
“B”
.605 (15.37)
.673 (17.09)
.819 (20.80)
.677 (17.20)
.684 (17.37)
.843 (21.41)
.680 (17.27)
.605 (15.37)
.540 (13.72)
.605 (15.37)
.605 (15.37)
.540 (13.72)
.605 (15.37)
WIRE
GAUGE
20
WIRE
DECIMAL
.032
JACKET
O.D.
.195-.210
22
20
20
18
22
22
22
18
18
18
18
.025
.032
.032
.043
.025
.025
.032
.043
.043
.043
.043
.220-.250
.272-.307
.242-.251
.265-.280
.262-.275
.195-.210
.180-.192
.195-210
.220-.250
.195-.210
.195-192
Straight Twist-On Plug
Field Installable - 1 Piece
PART
NUMBER
CPFI-UG88-1
CPFI-UG88-2
CPFI-UG88-3
CPFI-UG88-4
CPFI-UG88-5
CPFI-UG88-10
CPFI-UG88-11
CPFI-SW88-1
CPFI-SW88-2
CPFI-SW88-10
CPFI-SW88-11
4
CABLE
TYPE
RG-58
RG-59, 62
BELDEN 8281
RG-MATV-59
RG-6
RG-TFE-59, TFE-62
RG-TFE-58
RG-58
RG-59
RG-TFE-59
RG-TFE-58
CABLE CENTER
CONDUCTOR
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
STRANDED
STRANDED
STRANDED
STRANDED
WIRE
GAUGE
20
22
20
20
18
22
20
18
18
18
18
WIRE
DECIMAL
.032
.025
.032
.032
.040
.025
.032
.043
.043
.043
.043
JACKET
O.D.
.185-.205
.220-.250
.272-.307
.220-.250
.270-.280
.185-.205
.165-.178
.185-.205
.220-.250
.185-.205
.165-.178
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 50 Ohm
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
For Flexible Cable
Straight Clamp Plug
Solder or Crimp Captivated Contact - 6 Piece
PART NUMBER
CP-CS88-1
CP-CS88-2
CABLE TYPE
RG-58
RG-59, 62
Straight Clamp Plug
Solder or Crimp Captivated Contact - 3 Piece, Cone Shaped Clamp
PART NUMBER
CP-CL88-1
CP-CL88-2
CP-CL88-3
CP-CL88-10
CABLE TYPE
RG-58
RG-59, 62
BELDEN 8281
RG-TFE-59, TFE-62
Straight Crimp Plug
Two Ferrules - 3 Piece
PART NUMBER
CPMC-88-21
CPMC-88-22
CPMC-88-23
CABLE TYPE
RG-58, TFE-59
RG-58, 59
RG-58, 59
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
5
BNC Connectors - 50 Ohm
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Plug
Two Ferrules, Push-On Body - 2 Piece
PART NUMBER
CP-SW88-21
CP-SW88-23
CABLE TYPE
RG-58, 59, TFE-59
RG-58, TFE-58
Right Angle Twist-On Plug
Field Installable - 1 Piece
PART NUMBER
CPFI-RA-1
CPFI-RA-2
CPFI-RA-3
CPFI-RA-4
CPFI-RA-5
CPFI-RA-10
6
CABLE TYPE
RG-58
RG-59, 62
BELDEN 8281
RG-MATV-59
RG-6
RG-TFE-59, TFE-62
WIRE GAUGE
20
22
20
20
18
22
WIRE DECIMAL
.032
.025
.032
.032
.040
.025
JACKET O.D.
.185-.205
.220-.250
.272-.307
.220-.250
.270-.280
.185-.205
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 50 Ohm
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type, Rear Mount Bulkhead Jack
Solder or Crimp Contact - 3 Piece
PART NUMBER
CP-AD570
CP-89-19BM1*
CABLE TYPE
RG-58; BELDEN 9907
RG-174, 188, 316
“A”
1.417 (36.00)
1.409 (35.80)
*Denotes tapered crimp sleeve as shown in photo.
Straight Crimp Type, Front Mount Bulkhead Jack
Lug Terminal, Solder or Crimp Contact - 3 Piece
PART NUMBER
CP-89-1BM2
CP-89-19BM2*
CP-89-27BM2
CABLE TYPE
RG-58; BELDEN 9907
RG-174, 188, 316
RG-178, 196
“A”
1.209 (30.70)
1.200 (30.50)
1.134 (28.80)
*Denotes tapered crimp sleeve as shown in photo.
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
7
BNC Connectors - 50 Ohm
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Twist-On Jack
Field Installable - 1 Piece
PART NUMBER
CPFI-UG89-1
CPFI-UG89-2
CPFI-UG89-3
CPFI-UG89-4
CPFI-UG89-5
CPFI-UG89-10
CPFI-UG89-11
CABLE TYPE
RG-58
RG-59, 62
BELDEN 8281
RG-MATV-59
RG-6
RG-TFE-59, TFE-62
RG-TFE-58
WIRE GAUGE
20
22
20
20
18
22
20
WIRE DECIMAL
.032
.025
.032
.032
.040
.025
.032
JACKET O.D.
.185-.205
.220-.250
.272-.307
.220-.250
.270-.280
.185-.205
.165-.178
Straight Crimp Type Jack
Push-On Body - 2 Piece
PART
NUMBER
CP-89-1
CP-89-2
CP-89-3
CP-89-4
CP-89-5
CP-89-6
CP-89-10
CP-89-11
CABLE
TYPE
RG-58
RG-59, 62
BELDEN 8281
RG-MATV-59
RG-6
TIMES MI 2040
RG-TFE-59, TFE-62
RG-TFE-58
CABLE CENTER
CONDUCTOR
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
“A”
.680 (17.27)
.673 (17.09)
“B”
.668 (16.97)
.675 (17.15)
.677 (17.20)
.684 (17.37)
.673 (17.09)
.661 (16.79)
.684 (17.37)
.668 (16.97)
WIRE
GAUGE
20
22
20
20
18
22
22
22
WIRE
DECIMAL
.032
.025
.032
.032
.043
.025
.025
.032
JACKET
O.D.
.195-.210
.220-.250
.272-.307
.242-.251
.265-.280
.262-.275
.195-.210
.180-.192
* Requires solid center conductor.
8
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Commercial BNC
Miniature Connectors
CP-1094-AST 5
CP-1094-U 5
CP-1094-UL 5
CP-625U 5
CP-AD519 5
CP-BNCPC-001 3
CP-BNCPC-002 3
CP-BNCPC-005 3
CP-BNCPC-007 3
CP-BNCPC-009 3
CP-BNCPC-011 4
CP-BNCPC-013 4
CP-BNCPC-015 4
CP-BNCPC-017 4
Flange Mount Jack Receptacle 5
Front Mount Bulkhead Jack Receptacle 5
Front Mount Bulkhead Jack Receptacle With Solder Tab 5
Right Angle Bulkhead Jack Receptacle Shielded 3
Right Angle Bulkhead Jack Receptacle Isolated 4
Right Angle Bulkhead Jack Receptacle Isolated 4
Right Angle Bulkhead Jack Receptacle Shielded 4
Right Angle Bulkhead Jack Receptacle Shielded 4
Specifications* 2
Straight Bulkhead Jack Receptacle Isolated 3
Straight Bulkhead Jack Receptacle Shielded 3
Straight Jack Receptacle 3
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
BNC Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
The BNC series connector is a commercial quality product that intermates with all
standard double bayonet stud BNC designs. All contacts are captivated for ruggedness. The 50 ohm and 75 ohm interfaces are intermateable and provide quick,
reliable connections for instrumentation, medical and LAN applications.
Specifications*
50 Ohm BNC
Electrical Characteristics
Impedance: 50 Ohm nominal
Frequency range: 0-4 GHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Corona level: 375 volts minimum at 70,000 feet
Contact resistance: Outer - 0.2 milliohms maximum
Center - 2.1 milliohms maximum
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -55OC to +85OC
Moisture resistance: MIL-STD-202
Mechanical Characteristics
Durability: 500 cycles
Force to engage/disengage: 3 lbs. maximum
Cable retention: 20 lbs., RG-58 C/U cable
Materials
Body: Zinc or brass
Contact: Brass, beryllium copper or phosphor bronze
Spring Washer: Beryllium copper
Crimp sleeve: Brass
Insulator: Delrin® or TPX Polymethylpentene
Plating: Body - Nickel (except where noted)
Crimp sleeve - Nickel
Contact - Gold
* These values are typical and may not apply to all connectors.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 50 Ohm
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Jack Receptacle
PART NUMBER
CP-BNCPC-001
CP-BNCPC-002
DESCRIPTION
Silver plated body
Tin plated body
“A”
.718 (18.24)
.914 (23.22)
“B”
.541 (13.74)
.738 (18.75)
Straight Bulkhead Jack Receptacle
Shielded
CP-BNCPC-005
Straight Bulkhead Jack Receptacle
Isolated
CP-BNCPC-007
Right Angle Bulkhead Jack Receptacle
Shielded
CP-BNCPC-009
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
BNC Connectors - 50 Ohm
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Bulkhead Jack Receptacle
Shielded, Low Profile
CP-BNCPC-011
Right Angle Bulkhead Jack Receptacle
Shielded, Extra Low Profile
CP-BNCPC-013
Tin plated body
Mounting hole layout
figures 1 and 7 page 81.
Right Angle Bulkhead Jack Receptacle
Isolated
CP-BNCPC-015
With mounting posts
Right Angle Bulkhead Jack Receptacle
Isolated, Low Profile
CP-BNCPC-017
With mounting posts
4
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 50 Ohm
Bulkhead and Panel Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Front Mount Bulkhead Jack Receptacle
figure 1
figure 2
PART NUMBER
CP-625U
CP-1094-U
CP-1094-UL
“A”
.425 (10.80)
.371 (9.42)
.371 (9.42)
“B”
.183 (4.65)
.155 (3.94)
.155 (3.94)
NOTES
w/o solder lug
w/o solder lug
w/ solder lug
Mounting hole layout for part number CP-625U figure 2.
Mounting hole layout for part number CP-1094-U, CP-1094-UL figure 1.
Front Mount Bulkhead Jack Receptacle
With Solder Tab
CP-1094-AST
Flange Mount Jack Receptacle
CP-AD519
.126 (3.20) dia. mounting holes
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
5
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Commercial BNC
Miniature Connectors
CP-88T-50 6
CP-88TC-50 6
CP-88TV-50 6
CP-AD503 4
CP-AD505 4
CP-AD506 5
CP-AD510 5
CP-AD511 4
CP-AD521 3
CP-AD523 5
CP-AD525 5
CP-AD526 5
CP-AD550 5
CP-AD555 3
CP-AD556M 3
CP-AD558 3
CP-AD580 4
CPN-AD560-10 6
CPN-AD560-20 6
CPN-AD560-3 6
CPN-AD560-6 6
Attenuator Pads 6
Bulkhead Jack to Jack Adapter 3
Bulkhead Jack to Jack Adapter Isolated 4
Dust Cap with Chain 6
Jack to Jack Adapter 3
Jack to Plug Right Angle Adapter 4
Plug to Jack to Jack Goal Post T Adapter 5
Plug to Plug Adapter 4
Specifications* 2
Straight Crimp Plug, Dual Cable Adapter 5
Termination with Chain 6
Terminations 6
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
BNC Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
The BNC series connector is a commercial quality product that intermates with all
standard double bayonet stud BNC designs. All contacts are captivated for ruggedness. The 50 ohm and 75 ohm interfaces are intermateable and provide quick,
reliable connections for instrumentation, medical and LAN applications.
Specifications*
50 Ohm BNC
Electrical Characteristics
Impedance: 50 Ohm nominal
Frequency range: 0-4 GHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Corona level: 375 volts minimum at 70,000 feet
Contact resistance: Outer - 0.2 milliohms maximum
Center - 2.1 milliohms maximum
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -55OC to +85OC
Moisture resistance: MIL-STD-202
Mechanical Characteristics
Durability: 500 cycles
Force to engage/disengage: 3 lbs. maximum
Cable retention: 20 lbs., RG-58 C/U cable
Materials
Body: Zinc or brass
Contact: Brass, beryllium copper or phosphor bronze
Spring Washer: Beryllium copper
Crimp sleeve: Brass
Insulator: Delrin® or TPX Polymethylpentene
Plating: Body - Nickel (except where noted)
Crimp sleeve - Nickel
Contact - Gold
* These values are typical and may not apply to all connectors.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 50 Ohm
Terminations and attenuator pads
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Dust Cap with Chain
CP-BNC-CAP-1
Termination with Chain
CP-88TC-50
Green
50 Ohm 1/2 Watt
Terminations
CP-88T-50
Green
50 Ohm 1/2 Watt
Terminations
CP-88TV-50
Green
50 Ohm 1/4 Watt
Attenuator Pads
CPN-AD560-10
CPN-AD560-20
CPN-AD560-3
CPN-AD560-6
6
10 bd
20 bd
3 bd
6 bd
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 50 Ohm
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
In-series Adapters
Jack to Jack Adapter
CP-AD555
Bulkhead Jack to Jack Adapter
CP-AD556M
w/lock washer
Bulkhead Jack to Jack Adapter
With Isolation Washers
CP-AD558
CP-AD521
w/lock washer
Dual chassis mount
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
BNC Connectors - 50 Ohm
In-series Adapters
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Bulkhead Jack to Jack Adapter
Isolated
CP-AD580
Plug to Plug Adapter
CP-AD511
Jack to Plug Right Angle Adapter
CP-AD503
Jack to Jack to Plug T Adapter
CP-AD505
4
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 50 Ohm
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
In-series Adapters
Jack to Jack to Jack T Adapter
CP-AD506
Plug to Plug to Plug T Adapter
CP-AD510
Plug to Jack to Jack Goal Post T Adapter
CP-AD523
Straight Crimp Plug, Dual Cable Adapter
CP-AD525
CP-AD526
RG-58, 141
RG-59, 62
Plug to Jack to Jack Self Terminating T Adapter
Each Outlet Terminated - 50 Ohms
CP-AD550
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
5
BNC Connectors - 50 Ohm
Terminations and attenuator pads
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Dust Cap with Chain
CP-BNC-CAP-1
Termination with Chain
CP-88TC-50
Green
50 Ohm 1/2 Watt
Terminations
CP-88T-50
Green
50 Ohm 1/2 Watt
Terminations
CP-88TV-50
Green
50 Ohm 1/4 Watt
Attenuator Pads
CPN-AD560-10
CPN-AD560-20
CPN-AD560-3
CPN-AD560-6
6
10 bd
20 bd
3 bd
6 bd
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243.8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
BNC Connectors - 75 Ohm
Cabled Connectors
CP-78-10 3
CP-78-2 3
CP-78-5 3
CP-79-10 5
CP-79-2 5
CP-79-20BM1 4
CP-79-20BM2 5
CP-CS78-10 4
CP-CS78-2 4
CPFI-UG78-10 3
CPFI-UG78-2 3
CPFI-UG78-5 3
CPFI-UG79-10 5
CPFI-UG79-2 5
CPMC-78-10 3
CPMC-78-18 3
CPMC-78-2 3
CPMC-78-20 3
CPMC-78-3 3
CPMC-78-31 3
CPMC-78-40 3
CPMC-78-45 3
CPMC-78-47 3
CPMC-78-48 3
CPMC-78-5 3
CPMC-78-50 3
CPMC-78-55 3
CPMC-78-60 3
Specifications* 2
Straight Clamp Type Plug 4
Straight Crimp Type, Front Mount Bulkhead Jack 5
Straight Crimp Type Jack 5
Straight Crimp Type Plug 3
Straight Crimp Type, Rear Mount Bulkhead Jack 4
Straight Twist-On Jack 5
Straight Twist-On Plug 3
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
BNC Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Specifications
The BNC series connector is a commercial quality product that intermates with all
standard double bayonet stud BNC designs. All contacts are captivated for ruggedness. The 50 ohm and 75 ohm interfaces are intermateable and provide quick,
reliable connections for instrumentation, medical and LAN applications.
Specifications*
75 Ohm BNC
Electrical Characteristics
Impedance: 75 Ohm nominal
Frequency range: 0-2 GHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Corona level: 375 volts minimum at 70,000 feet
Contact resistance: Outer - 0.2 milliohms maximum
Center - 2.1 milliohms maximum
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -55OC to +85OC
Moisture resistance: MIL-STD-202
Mechanical Characteristics
Durability: 500 cycles
Force to engage/disengage: 3 lbs. maximum
Cable retention: 20 lbs., RG-59 C/U cable
Materials
Body: Zinc or brass
Contact: Brass or beryllium copper
Spring Washer: Beryllium copper
Crimp sleeve: Brass
Insulator: TPX
Plating: Body - Nickel (except where noted)
Crimp sleeve - Nickel
Contact - Nickel/Gold
* These values are typical and may not apply to all connectors.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 75 Ohm
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug
Solder or Crimp Contact - 3 Piece
PART NUMBER
CPMC-78-2
CPMC-78-3
CPMC-78-5
CABLE TYPE
RG-59, 62
BELDEN 8281, 9141, 9231
BELDEN RG-6
“A”
.520 (13.20)
.600 (15.24)
“B”
.595 (15.11)
.645 (16.38)
“C”
.563 (14.30)
.563 (14.30)
CPMC-78-10
CPMC-78-18
CPMC-78-20*
CPMC-78-31
CPMC-78-40
CPMC-78-45
CPMC-78-47
CPMC-78-48
CPMC-78-50
CPMC-78-55
CPMC-78-60
RG-TFE-59, TFE-62
BELDEN 8218, 1855A
RG-179, 187
BELDEN 8215
BELDEN 8824
BELDEN 9248, 1694A
BELDEN 8241, 8263, 8279
BELDEN 8221, 9244
BELDEN 82259, 89529
BELDEN 82281
BELDEN 82108, 89108
.520 (13.20)
.595 (15.11)
.563 (14.30)
.495 (12.57)
.633 (16.08)
.571 (14.50)
* Denotes tapered crimp sleeve.
Straight Twist-On Plug
Field Installable - 1 Piece
PART NUMBER
CPFI-UG78-2
CPFI-UG78-5
CPFI-UG78-10
CABLE TYPE
RG-59, 62
RG-6
RG-TFE-59, TFE-62
Straight Crimp Type Plug
Push-On Body - 2 Piece
PART NUMBER
CP-78-2
CP-78-5
CP-78-10
CABLE TYPE
RG-59, 62
RG-6
RG-TFE-59, TFE-62
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
BNC Connectors - 75 Ohm
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Clamp Type Plug
Solder or Crimp Contact - 3 Piece
PART NUMBER
CP-CS78-2
CP-CS78-10
CABLE TYPE
RG-59, 62
RG-TFE-59, TFE-62
Straight Crimp Type, Rear Mount Bulkhead Jack
Solder or Crimp Contact - 3 Piece
PART NUMBER
CP-79-20BM1*
CABLE TYPE
RG-179, 187
“A”
1.409 (35.80)
*Denotes tapered crimp sleeve as shown in photo.
4
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 75 Ohm
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
For Flexible Cable
Straight Crimp Type, Front Mount Bulkhead Jack
Lug Terminal, Solder or Crimp Contact - 3 Piece
PART NUMBER
CP-79-20BM2*
CABLE TYPE
“A”
RG-179, 187
1.200 (30.50)
*Denotes tapered crimp sleeve as shown in photo.
Straight Twist-On Jack
Field Installable - 1 Piece
PART NUMBER
CPFI-UG79-2
CPFI-UG79-10
CABLE TYPE
RG-59, 62
RG-TFE-59, TFE-62
Straight Crimp Type Jack
Push-On Body - 2 Piece
PART NUMBER
CP-79-2
CP-79-10
CABLE TYPE
RG-59, 62
RG-TFE-59, TFE-62
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
5
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
BNC Connectors - 75 Ohm
PC and Bulkhead Mount
CP-AD520 5
CP-BNC-BM-001 5
CP-BNC-BM-002 5
CP-BNCPC-003 3
CP-BNCPC-004 3
CP-BNCPC-006 3
CP-BNCPC-008 3
CP-BNCPC-010 3
CP-BNCPC-012 4
CP-BNCPC-014 4
CP-BNCPC-016 4
CP-BNCPC-018 4
Front Mount Bulkhead Jack Receptacle 5
Right Angle Bulkhead Jack Receptacle 3, 4
Specifications* 2
Straight Bulkhead Jack Receptacle 3
Straight Jack Receptacle 3
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
BNC Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Specifications
The BNC series connector is a commercial quality product that intermates with all
standard double bayonet stud BNC designs. All contacts are captivated for ruggedness. The 50 ohm and 75 ohm interfaces are intermateable and provide quick,
reliable connections for instrumentation, medical and LAN applications.
Specifications*
75 Ohm BNC
Electrical Characteristics
Impedance: 75 Ohm nominal
Frequency range: 0-2 GHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Corona level: 375 volts minimum at 70,000 feet
Contact resistance: Outer - 0.2 milliohms maximum
Center - 2.1 milliohms maximum
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -55OC to +85OC
Moisture resistance: MIL-STD-202
Mechanical Characteristics
Durability: 500 cycles
Force to engage/disengage: 3 lbs. maximum
Cable retention: 20 lbs., RG-59 C/U cable
Materials
Body: Zinc or brass
Contact: Brass or beryllium copper
Spring Washer: Beryllium copper
Crimp sleeve: Brass
Insulator: TPX
Plating: Body - Nickel (except where noted)
Crimp sleeve - Nickel
Contact - Nickel/Gold
* These values are typical and may not apply to all connectors.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 75 Ohm
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Jack Receptacle
PART NUMBER
CP-BNCPC-003
CP-BNCPC-004
DESCRIPTION
Silver plated body
Tin plated body
“A”
.718 (18.24)
.914 (23.22)
“B”
.541 (13.74)
.738 (18.75)
Straight Bulkhead Jack Receptacle
Shielded
CP-BNCPC-006
Straight Bulkhead Jack Receptacle
Isolated
CP-BNCPC-008
Right Angle Bulkhead Jack Receptacle
Shielded
CP-BNCPC-010
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
BNC Connectors - 75 Ohm
PC Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Bulkhead Jack Receptacle
Shielded, Low Profile
CP-BNCPC-012
Right Angle Bulkhead Jack Receptacle
Shielded, Extra Low Profile
CP-BNCPC-014
Tin plated body
Right Angle Bulkhead Jack Receptacle
Isolated
CP-BNCPC-016
With mounting posts
Right Angle Bulkhead Jack Receptacle
Isolated, Low Profile
CP-BNCPC-018
4
With mounting posts
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
BNC Connectors - 75 Ohm
Bulkhead Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Front Mount Bulkhead Jack Receptacle
With Lug Terminal
PART NUMBER
CP-BNC-BM-001
“A”
“B”
“C”
1.071 (27.20) .595 (15.11) .275 (6.99)
“D”
.230 (5.84)
“E”
.268 (6.80)
CP-BNC-BM-002
1.150 (29.21) .677 (17.20) .135 (3.43)
.080 (2.03)
.350 (8.90)
Front Mount Bulkhead Jack Receptacle
Isolated
CP-AD520
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
5
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
BNC Connectors - 75 Ohm
Adapters and Terminations
CP-88T-75 4
CP-88T-93 4
CP-88TC-75 4
CP-88TV-75 4
CP-AD557 3
CP-AD581 3
CP-AD584 3
CP-AD705 4
Bulkhead Jack to Bulkhead Jack Adapter Dual Chassis 3
Bulkhead Jack to Jack Adapter Isolated 3
Jack to Jack to Jack T Adapter 3
Jack to Jack to Plug T Adapter 4
Specifications* 2
Termination with Chain 4
Terminations 4
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
BNC Connectors - 75 Ohm
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
In-series Adapters
Bulkhead Jack to Jack Adapter
Isolated
CP-AD581
Bulkhead Jack to Bulkhead Jack Adapter
Dual Chassis Mount
CP-AD557
Jack to Jack to Jack T Adapter
CP-AD584
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
BNC Connectors - 75 Ohm
In-series Adapters and Terminations
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Jack to Jack to Plug T Adapter
CP-AD705
Termination with Chain
CP-88TC-75
Purple
75 Ohms
1/2 Watt
Terminations
CP-88T-75
CP-88T-93
Purple
White
75 Ohms
93 Ohms
1/2 Watt
1/2 Watt
Terminations
CP-88TV-75
4
75 Ohms
1/4 Watt
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
Emerson Electronic Connector and
Components Company D.B.A.
True 75 Ohm BNC
In-Series Adapters
Inches
Customer drawings available upon request
Jack to Jack Adapter
Part Number
CP-AD587
Plug to Plug Adapter
Part Number
CP-AD585
Jack to Plug Adapter
Part Number
CP-AD586
2
Cambridge Products • www.cambridgeproducts.com • 1.800.243.8814 • Fax: 507.833.6287
Emerson Electronic Connector and
Components Company D.B.A.
True 75 Ohm BNC
Inches
Customer drawings available upon request
Between-Series Adapters
BNC Jack to N Jack Adapter
Part Number
CP-AD822
BNC Plug to N Jack Adapter
Part Number
CP-AD821
Mating Engagement for 75 Ohm N Series Based on MIL-STD-348A
NOTES:
1. ID to meet VSWR and
contact resistance when
mated with .035/.037 dia
pin
2. Clearance for mating
connector coupling nut
3. 75 Ohm N series
connectors are not
compatible with 50 Ohm
N series connectors
Cambridge Products • www.cambridgeproducts.com • 1.800.243.8814 • Fax: 507.833.6287
3
BNC Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Specifications
The BNC series connector is a commercial quality product that intermates with all
standard double bayonet stud BNC designs. All contacts are captivated for ruggedness. The 50 ohm and 75 ohm interfaces are intermateable and provide quick,
reliable connections for instrumentation, medical and LAN applications.
Specifications*
75 Ohm BNC
Electrical Characteristics
Impedance: 75 Ohm nominal
Frequency range: 0-2 GHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Corona level: 375 volts minimum at 70,000 feet
Contact resistance: Outer - 0.2 milliohms maximum
Center - 2.1 milliohms maximum
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -55OC to +85OC
Moisture resistance: MIL-STD-202
Mechanical Characteristics
Durability: 500 cycles
Force to engage/disengage: 3 lbs. maximum
Cable retention: 20 lbs., RG-59 C/U cable
Materials
Body: Zinc or brass
Contact: Brass or beryllium copper
Spring Washer: Beryllium copper
Crimp sleeve: Brass
Insulator: TPX
Plating: Body - Nickel (except where noted)
Crimp sleeve - Nickel
Contact - Nickel/Gold
* These values are typical and may not apply to all connectors.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
True 75 Ohm BNC
Emerson Electronic Connector and
Components Company D.B.A.
Between-Series Adapters .............. 5
Cable Assembly Instructions ......... 6
Competitor Cross Reference ......... 7
Flexible Cabled Connectors .......... 3
In-Series Adapters ......................... 4
Return Loss Data .......................... 8
Specifications ................................ 2
Tooling ........................................... 7
Cambridge Products • www.cambridgeproducts.com • 1.800.243.8814 • Fax: 507.833.6287
True 75 Ohm BNC
Emerson Electronic Connector and
Components Company D.B.A.
Specifications
Electrical Characteristics
Mechanical Characteristics
Impedance: 75 Ohm
Frequency range: 0-3 GHz
VSWR: 1.10 + .03 F (F in GHz) BNC Cabled Plugs
1.03 + .02 F (F in GHz) BNC Adapters
Working voltage: 500 VRMS at sea level
Dielectric withstanding voltage: 1500 VRMS at sea level
Insulation resistance: 5000 megohms minimum
Contact resistance:
Outer - Nickel plated initial 2.5 milliohm max,
after environmental 3.5 milliohm max
Center - Initial 3 milliohm max,
after environmental 4 milliohm max
Braid to Body - 2.5 milliohm max (nickel plated), after
environmental not applicable
Corona level: 375 volts minimum at 70,000 feet
RF High Potential Withstanding Voltage: 700 VRMS at
4 and 7 MHz
Durability: 500 cycles min
Force to engage/disengage: 5 lbs. max, after durability 5
lbs max; 1 lb. min.
Coupling nut retention: 100 lbs. min
Contact retention: 6 lbs. min axial force
Material Specifications
Body: Brass, nickel plated .0001 min over copper plated
.00005 min
Contact: Brass, gold plated .00005 min over nickel plated
.00005 min over copper plated .00005 min
Crimp Sleeve: Copper, nickel plate .0001 min over copper
plated .00005 min
Nut: Zinc, nickel plated over copper plated
Insulator: Teflon
Spring Washer: Beryllium Copper (unplated)
Flat Washer: Steel, nickel plated
Gasket: Silicone rubber
Environmental Characteristics
(meets or exceeds the applicable paragraph of MIL-C-39012)
Thermal shock: MIL-STD-202, Method 107
Operating temperature: -65O C to 165O C
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition B
Vibration: MIL-STD-202, Method 204, Condition B
Moisture resistance: MIL-STD-202, Method 106
True 75 Ohm BNC Plug and Jack Mating Engagement
Cambridge Products • www.cambridgeproducts.com • 1.800.243.8814 • Fax: 507.833.6287
Emerson Electronic Connector and
Components Company D.B.A.
True 75 Ohm BNC
Flexible Cabled Connectors
Inches
Customer drawings available upon request
Straight Cabled Plug - 3 Piece
Solder or Crimp Captivated Contact
Part Number Cable Type
CPMC-68-2
CPMC-68-3
CPMC-68-5
RG-59, 140, 302,
Belden 9209A, 8279, 8241, 8263,
Commscope 5563
Gepco VJ59U
Contact I.D. Body I.D. Ferrule I.D.
.028
.152
.252
Belden 8281, 9231, 9141,
Gepco 7501
VP618PVC
.036
.203
.330
RG-6
Belden 8215
.033
.191
.355
CPMC-68-10 Belden 82108, 89108
Coleman 99969
.036
.149
.234
CPMC-68-18 Belden 8218
.021
.105
.180
CPMC-68-20 RG-179, 187
Belden 1520A
.016
.067
.128
CPMC-68-33 Belden 735A
Commscope 735,
Helex/Hitemp 735
BT3002, TZC75024
.021
.082
.160
CPMC-68-34 Belden 1855A
Commscope 7538,
Gepco 7538
.028
.105
.180
CPMC-68-35 Belden 1505A
Commscope 5565,
Gepco VPM2000
.036
.152
.252
CPMC-68-36 Belden 1695A
Gepco VSD2001TS
.044
.176
.265
CPMC-68-45 Belden 1694A, 9248,
Commscope 5765
Gepco VSD2001
.044
.187
.290
CPMC-68-50 Belden 1506A, 82259, 89259,
Gepco VPM2000TK, VPM2000TS
.036
.138
.234
Cambridge Products • www.cambridgeproducts.com • 1.800.243.8814 • Fax: 507.833.6287
1
Emerson Electronic Connector and
Components Company D.B.A.
True 75 Ohm BNC
Cable Assembly Instructions
Inches (millimeters)
Customer drawings available upon request
Straight Crimp Type Cabled Plug
Part
Number
Crimp
Sleeve Hex
Contact
Crimp Hex
RG-59, 140, 302, Belden 9209A, 8279, 8241, 8263,
Commscope 5563, Gepco VJ59U
.255 (6.48)
.042 (1.07)
CPMC-68-3
Belden 8281, 9231, 9141, Gepco 7501, VP618PVC
.324 (8.23)
.042 (1.07)
CPMC-68-5
RG-6, Belden 8215
.350 (8.89)
.042 (1.07)
CPMC-68-10 Belden 82108, 89108, Coleman 99969
.255 (6.48)
.042 (1.07)
CPMC-68-18 Belden 8218
.178 (4.52)
.042 (1.07)
CPMC-68-2
Cable Type
CPMC-68-20 RG-179, 187, Belden 1520A
.128 (3.25)
.042 (1.07)
CPMC-68-33 Belden 735A, Commscope 735, Helex/Hitemp 735,
BT3002, TZC75024
.178 (4.52)
.042 (1.07)
CPMC-68-34 Belden 1855A, Commscope 7538, Gepco 7538
.178 (4.52)
.042 (1.07)
CPMC-68-35 Belden 1505A, 734A, Commscope 5565,
Gepco VPM2000
.255 (6.48)
.042 (1.07)
CPMC-68-36 Belden 1695A, Gepco VSD2001TS
.264 (6.71)
.042 (1.07)
CPMC-68-45 Belden 1694A, 9248,
Commscope 5765, Gepco VSD2001
.288 (7.32)
.042 (1.07)
CPMC-68-50 Belden 1506A, 82259, 89259,
Gepco VPM2000TK, VPM2000TS
.255 (6.48)
.042 (1.07)
4
1. Identify connector parts.
(3 piece parts)
2. Slide crimp sleeve over the cable as
shown.
3. Strip cable per dimensions given and
loosen braid.
4. Place contact over cable center conductor and position against insulation.
5. Crimp (.042 crimp hex) or solder contact. If crimping the contact, crimp
the contact as close as possible to
the cable insulation as shown.
6. Push the cable with the attached contact into the connector body until contact is captured by internal rib within
connector body. Contact location
shall be per dimension shown. Slide
crimp sleeve over braid until it rests
against top of connector body. Finish assembly by crimping with appropriate crimp hex die as indicated for
each connector by the table.
Cambridge Products • www.cambridgeproducts.com • 1.800.243.8814 • Fax: 507.833.6287
Emerson Electronic Connector and
Components Company D.B.A.
True 75 Ohm BNC
Tooling and Competitor Cross Reference
Inches
Customer drawings available upon request
Precison Hand Crimp Tool with Dieset
Part Number
Hex Size
Hex Width
24-9961P
(Replacement
dieset
99-9961)
Pressmaster K
Hand crimp tool
frame with dieset
Description
.324 (8.22)
.264 (6.71)
.213 (5.41)
.042 (1.07)
.475 (12.06)
.475 (12.06)
.475 (12.06)
.080 (2.03)
24-9962P
(Replacement
dieset
99-9962)
Pressmaster K
Hand crimp tool
frame with dieset
.350 (8.89)
.288 (7.32)
.042 (1.07)
.475 (12.06)
.475 (12.06)
.080 (2.03)
24-9963P
(Replacement
dieset
99-9963)
Pressmaster K
Hand crimp tool
frame with dieset
.255 (6.48)
.178 (4.52)
.128 (3.25)
.042 (1.07)
.475 (12.06)
.475 (12.06)
.475 (12.06)
.080 (2.03)
Competitor Cross Reference
ADC
BNC-1
BNC-2
BNC-3
BNC-4
BNC-6
BNC-6
BNC-7
BNC-8
BNC-10
BNC-13
Cambridge
CPMC-68-35
CPMC-68-2
CPMC-68-33
CPMC-68-3
CPMC-68-10
CPMC-68-50
CPMC-68-18
CPMC-68-45
CPMC-68-36
CPMC-68-34
Amphenol
31-70008
31-70234
31-70235
31-70236
31-70237
31-70238
31-71013
Cambridge
CPMC-68-2
CPMC-68-45
CPMC-68-3
CPMC-68-18
CPMC-68-35
CPMC-68-33
CPMC-68-20
Kings
2025-44-9
2065-1-9
2065-2-9
2065-3-9
2065-5-9
2065-6-9
2065-7-9
2065-10-9
2065-10-9
2065-11-9
Cambridge
CPMC-68-33
CPMC-68-2
CPMC-68-35
CPMC-68-50
CPMC-68-20
CPMC-68-3
CPMC-68-2
CPMC-68-36
CPMC-68-45
CPMC-68-34
Cambridge Products • www.cambridgeproducts.com • 1.800.243.8814 • Fax: 507.833.6287
Trompeter
UPL220-009
UPL220-017
UPL220-023
UPL220-026
UPL2000-D1
UPL2000-D2
UPL2000-D3
UPL2000-D4
UPL2000-D6
UPL2000-D7
UPL2000-D8
UPL2000-D10
Cambridge
CPMC-68-18
CPMC-68-5
CPMC-68-10
CPMC-68-33
CPMC-68-34
CPMC-68-35
CPMC-68-2
CPMC-68-45
CPMC-68-36
CPMC-68-20
CPMC-68-50
CPMC-68-3
5
Cable Assembly Return Loss Data
0
(Data taken on one foot cable terminated at both ends with a
True 75 Ohm(data
Cambridge
BNC
isoftypical
True
75 Ohm connectors)
taken on 1 Products
foot cable sam
les,Plug,
data isdata
ty ical
all Trueof
75all
Ohm
connectors)
-10
-20
dB
-30
-40
-50
-60
-70
-80
0.0 0.2 0.4
0.6 0.8
1.0
1.2 1.4
1.6
1.8
2.0 2.2
2.4 2.6
2.8
3.0 3.2
3.4 3.6 3.8 4.0
Frequency (GHz)
CPMC-68-2
Belden 8263
CPMC-68-3
Belden 8281
CPMC-68-20
RG-179
CPMC-68-35
Belden 1505A
1.800.243.8814
• www.cambridgeproducts.com
Cambridge Products • www.cambridgeproducts.com • 1.800.243.8814 • Fax: 507.833.6287
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
TNC Series
The TNC connector was developed in the late 1950's because of the noise generated by BNC connectors
under extreme vibration. The name TNC stands for Threaded-Neill-Concelman. The TNC is basically a
threaded coupling version of the BNC connector with 50 ohm impedance and operation to 11 GHz. TNC
connectors are used in military and aerospace applications where performance is required under vibration.
Cabled Connectors
PC and Bulkhead Mount Connectors
In-Series Adapters
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
CP-AD309 4
CP-TNC-1 4
CP-TNC-10 4
CP-TNC-11 4
CP-TNC-19T 3
CP-TNC-2 4
CP-TNC-20T 3
CP-TNC-3 4
CP-TNC-4 4
CP-TNC-5 4
CP-TNC-6 4
CP-TNC-89-1 5
CP-TNC-89-1-BM 5
CP-TNC-89-10 5
CP-TNC-89-11 5
CP-TNC-89-13-BM 5
CP-TNC-89-19-BM 5
CP-TNC-89-2 5
CP-TNC-89-3 5
CP-TNC-89-4 5
CP-TNC-89-5 5
CP-TNC-89-6 5
CPFI-T-1 4
CPFI-T-10 4
CPFI-T-11 4
CPFI-T-2 4
CPFI-T-3 4
CPFI-T-4 4
CPFI-T89-1 6
CPFI-T89-10 6
CPFI-T89-11 6
CPFI-T89-2 6
CPFI-T89-3 6
CPFI-T89-4 6
CPFI-T90-1 6
TNC
Cabled Connectors
CPFI-T90-10 6
CPFI-T90-11 6
CPFI-T90-2 6
CPFI-T90-3 6
CPFI-T90-4 6
CPFI-TRA-1 5
CPFI-TRA-10 5
CPFI-TRA-2 5
CPM-TNC-19 3
CPM-TNC-19AS 3
CPM-TNC-20 3
CPM-TNC-20AS 3
CPMC-TNC-1 3
CPMC-TNC-10 3
CPMC-TNC-11 3
CPMC-TNC-12 3
CPMC-TNC-13 3
CPMC-TNC-14 3
CPMC-TNC-16 3
CPMC-TNC-17 3
CPMC-TNC-1B 3
CPMC-TNC-2 3
CPMC-TNC-3 3
RIGHT ANGLE TWIST-ON PLUG 5
SPECIFICATIONS* 2
STRAIGHT CRIMP TYPE JACK 5
STRAIGHT CRIMP TYPE PLUG 3, 4
STRAIGHT CRIMP TYPE PLUG - SLIDE ON INTERFACE
4
STRAIGHT CRIMP TYPE, REAR MOUNT BULKHEAD
JACK 5
STRAIGHT TWIST-ON JACK 6
STRAIGHT TWIST-ON PANEL MOUNT TYPE JACK 6
STRAIGHT TWIST-ON PLUG 4
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
TNC Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
The TNC connector is a threaded version of the BNC mating interface. All contacts
are captivated for ruggedness. The TNC is a commercial quality connector that
provides additional retention for shock and vibration applications. The TNC connector intermates with all standard 50 Ohm TNC connectors.
Specifications*
Electrical Characteristics
Impedance: 50 Ohm nominal (except where noted)
Frequency range: 0-11 GHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Corona level: 375 volts minimum at 70,000 feet
Contact resistance: Outer - 0.2 milliohms maximum
Center - 2.1 milliohms maximum
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -55OC to +85OC
Moisture Resistance: MIL-STD-202
Mechanical Characteristics
Durability: 500 cycles
Cable retention: 20 lbs., RG-58 C/U cable
Materials
Body and coupling nut: Zinc or brass
Contact: Beryllium copper, phosphor bronze or brass
Crimp Sleeve: Brass
Insulator: Teflon®, TPX or Delrin®
Hardware: Brass
Plating: Body - Nickel
Crimp sleeve - Nickel
Hardware - Nickel
Contact - Gold
* These values are typical and may not apply to all connectors.
Delrin® and Teflon® are registered trademarks of Dupont Corporation.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
TNC Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug
Solder or Crimp Contact - 3 Piece
PART NUMBER
CPMC-TNC-1
CPMC-TNC-1B
CPMC-TNC-2
CPMC-TNC-3
CPMC-TNC-10
CPMC-TNC-11
CPMC-TNC-12
CPMC-TNC-13
CPMC-TNC-14
CPMC-TNC-16
CPMC-TNC-17
CABLE TYPE
RG-58, 141
RG-58, 141 (black UV coating)
RG-59, 62
BELDEN 8281
RG-TFE-59, TFE-62
RG-TFE-58; RG-303
RG-122
RG-142, 223, 400, 55
RG-180, 34M, 195
Proflex RG-450
RG-8X (MINI 8)
“A”
.520 (13.20)
.520 (13.20)
.520 (13.20)
.600 (15.24)
.520 (13.20)
.541 (13.74)
.520 (13.20)
.520 (13.20)
.520 (13.20)
.520 (13.20)
.520 (13.20)
“B”
CONTACT I.D.
.595 (15.11)
.044
.595 (15.11)
.044
.595 (15.11)
.034
.645 (16.38)
.034
.595 (15.11)
.0325
.595 (15.11)
.044
.595 (15.11)
.034
.595 (15.11)
.044
.595 (15.11)
.0165
.595 (15.11)
.055
.595 (15.11)
.065
BODY I.D.
.126
.126
.173
.208
.141
.126
.107
.126
.107
.173
.173
FERRULE I.D.
.206
.206
.261
.344
.206
.192
.175
.220
.175
.261
.261
Straight Crimp Type Plug
Solder or Crimp Contact - 4 Piece
PART NUMBER
CPM-TNC-19
CPM-TNC-20
CPM-TNC-19AS
CPM-TNC-20AS
CABLE TYPE
RG-174, 188, 316
RG-179, 187
RG-174, 188, 316
RG-179, 187
CONTACT I.D.
.0245
.0165
.0245
.0165
BODY I.D.
.167
.167
.167
.167
FERRULE I.D.
.118
.118
.118
.118
TERMINATION
Crimp Insert
Crimp Insert
Extended Crimp Insert
Extended Crimp Insert
Straight Crimp Type Plug
Solder or Crimp Contact - 3 Piece
PART NUMBER
CP-TNC-19T
CP-TNC-20T
IMPEDANCE
50 Ohm
75 Ohm
CABLE TYPE
RG-174, 188, 316
RG-179, 187
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
TNC Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug
Push-On Body - 2 Piece
PART
NUMBER
CP-TNC-1
CP-TNC-2
CP-TNC-3
CP-TNC-4
CP-TNC-5
CP-TNC-6
CP-TNC-10
CP-TNC-11
CABLE
TYPE
RG-58
RG-59, 62
BELDEN 8281
RG-MATV-59
RG-6
TIMES MI 2040
RG-TFE-59, TFE-62
RG-TFE-58
“A”
.684 (17.37)
.673 (17.09)
.819 (20.80)
.677 (17.20)
.684 (17.37)
.843 (21.41)
.680 (17.27)
“B”
.605 (15.37)
.605 (15.37)
.540 (13.72)
.605 (15.37)
.605 (15.37)
.540 (13.72)
.605 (15.37)
WIRE
GAUGE
20
22
20
20
18
22
22
WIRE
DECIMAL
.032
.025
.032
.030
.043
.032
.025
JACKET
O.D.
.195-.21
.220-.250
.272-.307
.242-.251
.265-.280
.262-.275
.195-.210
Requires solid center conductor.
Straight Twist-On Plug
For Solid Center Conductor
PART NUMBER
CPFI-T-1
CPFI-T-2
CPFI-T-3
CPFI-T-4
CPFI-T-10
CPFI-T-11
CABLE TYPE
RG-58
RG-59, 62
BELDEN 8281
RG-MATV-59
RG-TFE-59
RG-TFE-58
WIRE GAUGE
20
22
20
20
22
20
WIRE DECIMAL JACKET O.D.
.032
.185-.205
.025
.220-.250
.040
.272-.307
.032
.220-.250
.025
.185-.205
.032
.165-.178
Straight Crimp Type Plug - Slide On Interface
Solder or Crimp Contact - 3 Piece
PART NUMBER
CP-AD309
4
CABLE TYPE
RG-58
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
TNC Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Twist-On Plug
For Solid Center Conductor
PART NUMBER
CPFI-TRA-1
CPFI-TRA-2
CPFI-TRA-10
CABLE TYPE
RG-58
RG-59, 62
RG-TFE-59
WIRE GAUGE
20
22
22
WIRE DECIMAL JACKET O.D.
.032
.185-.205
.025
.220-.250
.025
.185-.205
Straight Crimp Type Jack
Push-On Body - 2 Piece
PART
NUMBER
CP-TNC-89-1
CP-TNC-89-2
CP-TNC-89-3
CP-TNC-89-4
CP-TNC-89-5
CP-TNC-89-6
CP-TNC-89-10
CP-TNC-89-11
CABLE
TYPE
RG-58
RG-59, 62
BELDEN 8281
RG-MATV-59
RG-6
TIMES MI 2040
RG-TFE-59
RG-TFE-58
“A”
.680 (17.27)
.673 (17.09)
.819 (20.80)
.677 (17.20)
.684 (17.37)
.843 (21.41)
.684 (17.37)
“B”
.668 (16.97)
.675 (17.15)
.668 (16.97)
.673 (17.09)
.605 (15.37)
.668 (16.97)
.668 (16.97)
WIRE
GAUGE
20
22
20
20
18
22
WIRE
DECIMAL
.032
.025
.032
.030
.043
.025
JACKET
O.D.
.195-.210
.220-.250
.272-.307
.242-.251
.265-.280
.262-.275
Requires solid center conductor.
Straight Crimp Type, Rear Mount Bulkhead Jack
Solder or Crimp Contact - 3 Piece
PART NUMBER
CP-TNC-89-13-BM
CP-TNC-89-1-BM
CP-TNC-89-19-BM
CABLE TYPE
RG-142, 223, 400
RG-58; BELDEN 9907
RG-174, 188, 316
“A”
1.425 (36.20)
1.425 (36.20)
1.417 (35.99)
“B”
.775 (19.69)
.775 (19.69)
.765 (19.43)
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
5
TNC Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Twist-On Jack
For Solid Center Conductor
PART NUMBER
CPFI-T89-1
CPFI-T89-2
CPFI-T89-3
CPFI-T89-4
CPFI-T89-10
CPFI-T89-11
CABLE TYPE
RG-58
RG-59, 62
BELDEN 8281
RG-MATV-59
RG-TFE-59
RG-TFE-58
WIRE GAUGE
20
22
20
20
22
20
WIRE DECIMAL
.032
.025
.040
.032
.025
.032
JACKET O.D.
.185-.205
.220-.250
.272-.307
.220-.250
.185-.205
.165-.178
Straight Twist-On Panel Mount Type Jack
5/8” D Mounting Hole
PART NUMBER
CPFI-T90-1
CPFI-T90-2
CPFI-T90-3
CPFI-T90-4
CPFI-T90-10
CPFI-T90-11
6
CABLE TYPE
RG-58
RG-59, 62
BELDEN 8281
RG-MATV-59
RG-TFE-59
RG-TFE-58
WIRE GAUGE
20
22
20
20
22
20
WIRE DECIMAL
.032
.025
.040
.032
.025
.032
JACKET O.D.
.185-.205
.220-.250
.272-.307
.220-.250
.185-.205
.165-.178
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
TNC Connectors
PC and Bulkhead Mount
CP-TNC-BM-001 3
CP-TNC-BM-002 3
CP-TNC-PC-001 3
CP-TNC-PC-002 3
CP-TNC-PC-003 3
FRONT MOUNT BULKHEAD JACK RECEPTACLE 3
RIGHT ANGLE BULKHEAD JACK RECEPTACLE 3
SPECIFICATIONS* 2
STRAIGHT BULKHEAD JACK RECEPTACLE 3
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
TNC Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
The TNC connector is a threaded version of the BNC mating interface. All contacts
are captivated for ruggedness. The TNC is a commercial quality connector that
provides additional retention for shock and vibration applications. The TNC connector intermates with all standard 50 Ohm TNC connectors.
Specifications*
Electrical Characteristics
Impedance: 50 Ohm nominal (except where noted)
Frequency range: 0-11 GHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Corona level: 375 volts minimum at 70,000 feet
Contact resistance: Outer - 0.2 milliohms maximum
Center - 2.1 milliohms maximum
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -55OC to +85OC
Moisture Resistance: MIL-STD-202
Mechanical Characteristics
Durability: 500 cycles
Cable retention: 20 lbs., RG-58 C/U cable
Materials
Body and coupling nut: Zinc or brass
Contact: Beryllium copper, phosphor bronze or brass
Crimp Sleeve: Brass
Insulator: Teflon®, TPX or Delrin®
Hardware: Brass
Plating: Body - Nickel
Crimp sleeve - Nickel
Hardware - Nickel
Contact - Gold
* These values are typical and may not apply to all connectors.
Delrin® and Teflon® are registered trademarks of Dupont Corporation.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
TNC Connectors
PC and Bulkhead Mount
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Right Angle Bulkhead Jack Receptacle
Shielded
PART NUMBER
CP-TNC-PC-002
CP-TNC-PC-003
“A”
.622 (15.80)
.512 (13.00)
“B”
.335 (8.50)
.268 (6.80)
Straight Bulkhead Jack Receptacle
Shielded, with Mounting Posts
CP-TNC-PC-001
Front Mount Bulkhead Jack Receptacle
With Lug Terminal
CP-TNC-BM-001
Front Mount Bulkhead Jack Receptacle
Isolated
CP-TNC-BM-002
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
TNC
Adapters and Terminators
CP-AD306 4
CP-AD307 4
CP-AD308 4
CP-AD355 3
CP-AD356 3
CP-AD358 3
CP-TNC-T50 4
CP-TNC-T75 4
Jack to Bulkhead Jack Adapter 3, 4
Jack to Jack Adapter 3
Jack to Push-On Interface Plug Adapter 4
Right Angle Jack to Plug Adapter 4
Specifications 2
Terminator 4
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
TNC Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
The TNC connector is a threaded version of the BNC mating interface. All contacts
are captivated for ruggedness. The TNC is a commercial quality connector that
provides additional retention for shock and vibration applications. The TNC connector intermates with all standard 50 Ohm TNC connectors.
Specifications*
Electrical Characteristics
Impedance: 50 Ohm nominal (except where noted)
Frequency range: 0-11 GHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Corona level: 375 volts minimum at 70,000 feet
Contact resistance: Outer - 0.2 milliohms maximum
Center - 2.1 milliohms maximum
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -55OC to +85OC
Moisture Resistance: MIL-STD-202
Mechanical Characteristics
Durability: 500 cycles
Cable retention: 20 lbs., RG-58 C/U cable
Materials
Body and coupling nut: Zinc or brass
Contact: Beryllium copper, phosphor bronze or brass
Crimp Sleeve: Brass
Insulator: Teflon®, TPX or Delrin®
Hardware: Brass
Plating: Body - Nickel
Crimp sleeve - Nickel
Hardware - Nickel
Contact - Gold
* These values are typical and may not apply to all connectors.
Delrin® and Teflon® are registered trademarks of Dupont Corporation.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
TNC Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
In-series Adapters
Jack to Jack Adapter
CP-AD355
Jack to Bulkhead Jack Adapter
CP-AD356
Jack to Bulkhead Jack Adapter
With Isolation Washers
CP-AD358
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
TNC Connectors
In-Series Adapters and Terminations
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Jack to Bulkhead Jack Adapter
With Isolation Bulkhead Dual Chassis Mount
CP-AD307
Jack to Push-On Interface Plug Adapter
Quick Disconnect
CP-AD308
Right Angle Jack to Plug Adapter
CP-AD306
Terminator
PART NUMBER
CP-TNC-T50
CP-TNC-T75
4
IMPEDANCE
50 Ohm
75 Ohm
COLOR
Green
Purple
POWER
1/2 Watt
1/2 Watt
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
Type N connectors
The N connector was invented by and named for Paul Neill of Bell Labs. It was the first connector
capable of true microwave performance. N connectors have threaded coupling interfaces and are 50 ohms
in impedance. There are also 75 ohm versions available, but they will not mate with the more common
50 ohm version. N connectors operate up to 11 GHz in the common 50 ohm impedance design. Although
less common, there are also precision versions of the N connector available which operate up to 18 GHz.
Applications for the N connector include Local Area Networks (LANs); test equipment; broadcast,
satellite and military communication equipment.
N Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Adapters 6
CP-AD800 6
CP-AD801 5
CP-AD803 6
CP-AD812 6
CP-AD850 6
CP-AD851 6
CP-ETN-TF 6
CP-ETN-TM 6
CPFI-ETN-22 4
CPFI-ETN-23 4
CPFI-N-8 4
CPN-1 4
CPN-142T 4
CPN-16 4
CPN-17 4
CPN-2 4
CPN-68-1 3
CPN-68-13 3
CPN-68-2 3
CPN-68-28 3
CPN-68-8 3
CPN-68-CL-1 3
CPN-68-CL-13 3
CPN-68-CL-28 3
CPN-68-CL-8 3
CPN-68-RA-1 3
CPN-68-RA-13 3
CPN-68-RA-28 3
CPN-68-RA-8 3
CPN-69-BM-1 5
CPN-69-BM-13 5
CPN-69-BM-2 5
CPN-69-FM-1 5
CPN-69-FM-13 5
CPN-8 4
CPN-8/110 4
CPN-CL-16 4
CPN-CL-17 4
CPN-CL-2 4
CPN-ETN-22 4
CPN-ETN-23 4
Flange Mount Jack Receptacle 5
For Flexible Cable 3
Right Angle Crimp Type Plug 3
Specifications 2
Straight Clamp Type Plug 3, 4
Straight Crimp Type Flange Mount Jack 5
Straight Crimp Type Plug 3, 4
Straight Crimp Type, Rear Mount Bulkhead Jack 5
Straight Twist-On Plug 4
Termination 6
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
N Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
The N connector employs a large diameter threaded interface for excellent strength
and reliability. This commercial quality connector handles high power applications
such as antenna feeds for radios and cell sites. Termination options include crimp
and clamp styles for rugged service.
Specifications*
Electrical Characteristics
Impedance: 50 Ohm nominal
Frequency range: 0-11 GHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Corona level: 375 volts minimum at 70,000 feet
Contact resistance: Outer - 0.2 milliohms maximum
Center - 2.1 milliohms maximum
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -65OC to +165OC
Moisture Resistance: MIL-STD-202
Mechanical Characteristics
Durability: 500 cycles
Cable retention: 20 lbs., RG-58 C/U cable
Materials
Body and coupling nut: Brass
Contact: Brass, phosphor bronze or beryllium copper
Crimp sleeve: Brass
Insulator: Teflon® or Delrin®
Hardware: Brass
Plating: Body - Nickel
Crimp sleeve - Nickel
Hardware - Nickel
Contact - Gold
* These are typical and may not apply to all connectors.
Delrin® and Teflon® are registered trademarks of Dupont Corporation.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
N Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug
Solder or Crimp Contact
PART NUMBER
CPN-68-28
CPN-68-8
CPN-68-2
CPN-68-13
CPN-68-1
CABLE TYPE
RG-9, 214
RG-8, 213
RG-59, 62
RG-142, 223, 400
RG-58; BELDEN 9907
“A”
1.453 (36.91)
1.453 (36.91)
1.356 (34.44)
1.356 (34.44)
1.356 (34.44)
Right Angle Crimp Type Plug
Solder Contact
PART NUMBER
CPN-68-RA-28
CPN-68-RA-8
CPN-68-RA-13
CPN-68-RA-1
CABLE TYPE
RG-9, 214
RG-8, 213
RG-142, 223, 400
RG-58; BELDEN 9907
“A”
1.437 (36.50)
1.437 (36.50)
1.260 (32.00)
1.260 (32.00)
Assembly instructions on page 73.
Straight Clamp Type Plug
Solder Contact
PART NUMBER
CPN-68-CL-28
CPN-68-CL-8
CPN-68-CL-13
CPN-68-CL-1
CABLE TYPE
RG-9, 214
RG-8, 213
RG-142, 223, 400
RG-58; BELDEN 9907
“A”
1.465 (37.21)
1.465 (37.21)
1.115 (28.32)
1.200 (30.48)
“B”
.615 (15.62)
.615 (15.62)
none
.435 (11.05)
“C”
.630 (16.00)
.630 (16.00)
.370 (9.40)
.433 (11.00)
Assembly instructions on page 74.
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
N Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Clamp Type Plug
Solder Contact
PART NUMBER
CPN-CL-2
CPN-CL-16
CPN-CL-17
CABLE TYPE
RG-59
PROFLEX RG-450
RG-8X (MINI 8)
WIRE GAUGE
22
18
16
WIRE DECIMAL JACKET O.D.
.0253
.220-.250
.056
.220-.250
.0508
.220-.250
Straight Twist-On Plug
90 Second Termination - 1 Piece
Fig. 2
Fig. 1
PART NUMBER
CPFI-N-8
CPFI-ETN-22
CPFI-ETN-23
CABLE TYPE
RG-8, 213
RG-ETN-TFE-89880
RG-ETN-POLY-9880
WIRE GAUGE
13
13
13
WIRE DECIMAL
.085
.085
.085
JACKET O.D.
.400-.410
.370-.380
.400-.410
FIGURE
1
2
2
Straight Crimp Type Plug
120 Second Termination - 3 Piece
PART
NUMBER
CPN-1
CPN-142T
CPN-2
CPN-8
CPN-8/110
CPN-16
CPN-17
CPN-ETN-22
CPN-ETN-23
4
CABLE
TYPE
RG-58
RG-142 TFE
RG-59, 62
RG-8, 213
RG-8, 213
PROFLEX RG-450
RG-8X (MINI 8)
RG-ETN-TFE-89880
RG-ETN-POLY-9880
WIRE
GAUGE
18
20
22
13
10
18
16
13
13
WIRE
DECIMAL
.043
.034
.0253
.072
.110
.056
.065
.085
.085
JACKET
O.D.
.185-.205
.200-.220
.220-.250
.400-.410
.400-.410
.220-.250
.220-.250
.370-.380
.400-.410
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
N Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type, Rear Mount Bulkhead Jack
Solder or Crimp Contact
PART NUMBER
CPN-69-BM-2
CPN-69-BM-13
CPN-69-BM-1
CABLE TYPE
RG-59, 62
RG-142, 223, 400
RG-58; BELDEN 9907
Straight Crimp Type Flange Mount Jack
Solder or Crimp Contact
PART NUMBER
CPN-69-FM-13
CPN-69-FM-1
CABLE TYPE
RG-142, 223, 400
RG-58; BELDEN 9907
Flange Mount Jack Receptacle
CP-AD801
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
5
N Connectors
Adapters
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Jack to Jack Adapter
CP-AD850
Jack to Bulkhead Jack Adapter
CP-AD851
Mounting hole layout
figure 11 page 82.
Right Angle Jack to Plug Adapter
CP-AD803
Plug to Plug Adapter
CP-AD800
Right Angle Plug to Plug Adapter
CP-AD812
Jack Termination
CP-ETN-TF
6
50 Ohm
1 Watt
Plug Termination
CP-ETN-TM
50 Ohm
1 Watt
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
F Series
One of the most popular of the coaxial connectors, the BNC was developed in the late 1940's. The name
BNC stands for Bayonet-Neill-Concelman. Bayonet describes the interface coupling mechanism, while
Neill and Concelman were the inventors of the N and C connectors. The BNC is essentially a miniature
version of the C connector which is a Bayonet version of the N connector. BNC connectors are available
in both 50 and 75 ohm versions, both versions will mate together. The 50 ohm designs operate up to a
frequency of 4 GHz. BNC connectors are used in many applications, some of which are flexible
networks, instrumentation and computer peripheral interconnections.
F Series Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
CP-AD100 4
CP-AD101 4
CP-AD102 4
CP-AD150 3
CPCR-59-1/2 2
CPCR-59-1/4 2
CPCR-59-1/8 2
CPF-1/5R 3
CPF-11-1/5 3
CPF-11-ALM 3
CPF-56-ALMWP 3
CPF-56-ALMZ 3
CPF-56-ALS 3
CPF-56-ALX 3
CPF-56-CP 3
CPF-56-P 3
CPF-56-WPG 3
CPF-59-1/2 2
CPF-59-1/4 2
CPF-59-1/8 2
CPF-59-A 2
CPF-59-ALM 2
CPF-59-ALX 2
CPF-59-CP 2, 3
CPF-59-D 2
CPF-59-FLM 2
CPF-59-G 2
CPF-59-G-1/8 2
CPF-59-PG 2
CPF-59-QD 2
CPF-59-RA 2
CPF-59-T 4
CPF-59-TE 2
CPF-61LR 4
CPF-61OR 4
CPF-61PC 4
CPF-61PG 4
CPF-61RM 4
CPF-61SE 4
CPF-61SR 4
CPF-61WF 4
CPF-61WP 4
CPF-7-A 3
CPF-71 4
CPF-71CH 4
CPF-71PC 4
CPF-81 4
CPF-81-1G 4
CPF-81-L 4
CPF-81-NW 4
CPF-NW 4
CPFI-56 3
CPFI-59 2
CPFID-59 2
European Style Connectors 3
F In-Series Adapters 4
F Series Connectors For RG-11/RG7 3
F Series Connectors For RG-59 2
F Series Connectors For RG-6 3
PCB 4
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
F Series Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
F Series Connectors
For RG-59
Straight Crimp Plug
Straight Crimp Plug
Straight Crimp Plug
Straight Crimp Plug
w/separate 1/8” crimp ring
w/separate 1/8” crimp ring
Gold Plated
w/separate 1/4” crimp ring
w/separate 1/2” crimp ring
CPF-59-1/8
CPF-59-G-1/8
CPF-59-1/4
CPF-59-1/2
Straight Crimp Plug
Straight Crimp Plug
Straight Crimp Plug
Straight Crimp Plug
Thin cable, RG-59, 62 Teflon
with attached 1/8” ring
for standard RG-58 cable
for Tri-Shield
CPF-59-TE
CPF-59-A
CPF-59-ALM
CPF-59-ALX
Straight Crimp Plug
Straight Plug
Straight Twist-on Plug
Straight Twist-on Plug
Compression Type Weatherproof “F” CATV Connectors
Twist-On (no crimp)
deluxe 1/2” grip area
quick disconnect
CPF-59-CP
CPFI-59
CPFID-59
CPF-59-QD
Straight Crimp Jack
Straight Crimp Plug
Straight Crimp Plug
Straight Crimp Plug
for Teflon/Plenum RG-59
push on “F”
push on “F” w/ center pin
CPF-59-D
CPF-59-G
CPF-59-PG
CPF-59-FLM
Right Angle Crimp Plug
Crimp Ring, 1/8” long
Crimp Ring, 1/4” long
Crimp Ring, 1/2” long
1/8” crimp ring for RG-59
1/4” crimp ring for RG-59
1/2” crimp ring for RG-59
CPCR-59-1/8
CPCR-59-1/4
CPCR-59-1/2
CPF-59-RA
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
F Series Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
F Series Connectors
For RG-6
Straight Crimp Plug
Crimp Ring
Straight Crimp Plug
Straight Crimp Plug
w/separate 1/4” crimp ring
1/4” crimp ring for RG-56
w/attached 1/4” crimp ring
for RG-6
CPF-56-1/4
CPCR-56-1/4
CPF-56-A
CPF-56-ALM
Straight Crimp Plug
Straight Crimp Plug
Straight Crimp Plug
Straight Crimp Plug
zinc plated
for RG-6
.324 dia., chrome plated/
interior gasket for water proofing
for Tri-Shield
for RG-6 Quad Shield
CPF-56-ALMZ
CPF-56-ALMWP
CPF-56-ALX
CPF-56-ALS
Plug Termination
Straight Plug
Straight Crimp Plug
Straight Crimp Plug
for Teflon/Plenum RG-6
twist on (no crimp)
gel filled w/o ring
compression F RG6 single,
Tri/Quad shields for RG-6
CPF-56-P
CPFI-56
CPF-56-WPG
CPF-56-CP CPF-59-CP
European Style Connectors
Straight Crimp Plug
for RG-6
CP-AD150
F Series Connectors
For RG-11/RG7
Straight Crimp Plug
Crimp Ring
Straight Crimp Plug
Straight Plug
w/separate 1/5” crimp ring
1/5” crimp ring for RG-11
for standard RG-11
twist-on (no crimp)
CPF-11-1/5
CPF-1/5R
CPF-11-ALM
CPF-7-A
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
F Series Connectors
Adapters, Terminations, PCB, Vertical and Chassis Mount Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Side Edge Mount
Vertical Mount
Right Angle Mount
Right Angle Mount
PCB Jack
PCB Jack
long Version PCB Jack
PCB Bulkhead Jack
CPF-61SE
CPF-61PC
CPF-61LR
CPF-61SR
Right Angle Mount
Vertical Chassis Mount
Rear Mount
Chassis Mount
open frame D cut
PCB Jack
D cut base, push on Plug
wide flange Jack
weather proof w/”O” ring,
wide flange Jack
CPF-61OR
CPF-71CH
CPF-61WF
CPF-61WP
Vertical Mount
Vertical Mount
Rear Mount
Plug Termination
PCB Jack, Gold
PCB Plug
Jack
75 Ohm “F”,
1/2 watt 5% terminator
CPF-61PG
CPF-71PC
CPF-61RM
CPF-59-T
F In-Series Adapters
Jack to Plug Adapter
push on interface plug
Right Angle Jack to Plug
Adapter
Right Angle Jack to Plug
Adapter
push on interface plug
4
CP-AD100
CP-AD101
CP-AD102
Jack to Jack Adapter
Jack to Jack Adapter
Jack to Jack Adapter
3/4” inline splice
3/4” w/ nut and washer
1” inline splice
CPF-81
CPF-81-NW
CPF-81-L
Jack to Jack Adapter
Nut and Washer
Plug to Plug Adapter
3/4” inline splice (blue insert)
29dB return loss at 1 GHz
For use with all Cambridge mounts/
splices
double male splice
CPF-81-1G
CPF-NW
CPF-71
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
http://www.woken.com.tw/
Twinax Series Connectors
The Twinax Series connector is a medium-size unit with a 3/4-20 threaded coupling mechanism. The
connectors are designed for use in 34, 36 and 38 installations where they find wide applications as the
standard termination for the twinaxial cable used to interconnect the host computer system and peripheral
equipment. A keyway is used to achieve the required polarization. The connector is designed for use with
93 Ohm cable.
Twinax Series
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
CP-AD403 4
CP-TWX-100 4
CP-TWX-150 4
CP-TX-60 3
CP-TX-62 3
CP-TX-67 3
CP-TX-70-2 3
In-Series Adapters 4
Jack to Jack Adapter 4
Jack to Jack to Jack T Adapter 4
Straight Plug 3
Terminator 4
Terminators 4
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
Twinax Series
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
The Twinax Series connector is a medium-size unit with a 3/4-20 threaded coupling mechanism. The connectors are designed for use in IBM 34, 36 and 38 installations where they
find wide applications as the standard termination for the twinaxial cable used to interconnect the host computer system and peripheral equipment. A keyway is used to achieve
the required polarization. The connector is designed for use with 93 Ohm cable.
Specifications*
ELECTRICAL CHARACTERISTICS
Impedance: 95 Ohm nominal
Frequency range: 0-200 MHz usable to 500 MHz
Voltage rating: 500 volts peak
Insulation resistance: >5x109, contact to contact and body to body
ENVIRONMENTAL CHARACTERISTICS
Thermal Limits: -67o to + 185oF (-55o to 85oC)
MECHANICAL CHARACTERICS
Mating: Keyway polarization, 3/4 -20 threaded coupling
Cable affixment (braid or jacket): Screw-thread nut and braid clamp
MATERIALS
Body: Zinc
Contact: Male: brass/nickel, gold plated
Female: beryllium copper, gold plated
Other metal parts: Brass: nickel
Insulator: TPX Polymethylpentene
* These values are typical and may not apply to all connectors.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
Twinax Series
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Plug
Solder or Crimp - Standard PVC Style
PART NUMBER
CABLE TYPE
CP-TX-60
BELDEN 9207 PVC
WIRE GAUGE
WIRE DECIMAL JACKET O.D. POLARIZATION
20
.037
.330
90O
Straight Plug
Solder or Crimp - Teflon Style
PART NUMBER
CP-TX-62
CABLE TYPE
BELDEN 89207 TFE
WIRE GAUGE
20
WIRE DECIMAL JACKET O.D. POLARIZATION
.037
.282
90O
Straight Plug
Solder or Crimp - Reduced Type Style
PART NUMBER
CP-TX-70-2
CABLE TYPE
.250 size
WIRE GAUGE
20
WIRE DECIMAL JACKET O.D. POLARIZATION
.037
.250
90O
WIRE GAUGE
20
WIRE DECIMAL JACKET O.D. POLARIZATION
.037
.330
90O
Straight Plug
Crimp-On Body
PART NUMBER
CP-TX-67
CABLE TYPE
BELDEN 9207 PVC
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
Twinax Series
In-Series Adapters and Terminators
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Jack to Jack to Jack T Adapter
CP-AD403
Jack to Jack Adapter
CP-TX-65
Terminator
PART NUMBER
CP-TWX-100
CP-TWX-150
4
IMPEDANCE
100 Ohm
150 Ohm
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-242-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
TEL: 886-3-397-9900
FAX :886-3-397-9911
E-Mail:service@woken.com.tw
UHF, Mini-UHF Connectors
http://www.woken.com.tw/
UHF Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
CP-AD204 5
CP-AD205 5
CP-AD206 4
CP-AD207 5
CP-AD210 5
CP-AD250 4
CP-AD251 4
CP-AD258 4
CP-AD259 4
CPF-249-1 4
CPF-249-2 4
CPFI-249-1 4
CPFI-249-2 4
CPFI-249-3 4
CPFI-259-1 3
CPFI-259-17 3
CPFI-259-2 3
CPFI-259-3 3
CPL-259-1 3
CPL-259-10 3
CPL-259-16 3
CPL-259-17 3
CPL-259-18 3
CPL-259-2 3
CPL-259-24 3
CPL-259-7 3
CPL-259-8 3
CPL-259-9 3
4-Hole Flange Mount Jack 4
Bulkhead Jack to Bulkhead Jack Adapter 5
Jack to Jack Adapter 5
Jack to Jack to Jack T Adapter 5
Right Angle Jack to Plug Adapter 5
Specifications 2
Straight Crimp Type Jack 4
Straight Crimp Type Plug 3
Straight Solder Type Plug 4
Straight Twist-On Jack 4
Straight Twist-On Plug 3
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
UHF Connectors
Specificaitons
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
The UHF connectors are low cost, general purpose units designed for low frequency system applications. These commercial quality connectors are equipped
with threaded coupling interfaces for secure and reliable connections. The Standard UHF and Mini UHF connectors are not intermateable.
Specifications*
STANDARD UHF
Electrical Characteristics
Impedance: Nonconstant
Frequency range: 0-500 MHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -55OC to +85OC
Mechanical Characteristics
Durability: 500 cycles
Cable retention: 20 lbs., RG-58 C/U cable
Materials
Body and coupling nut: Zinc or brass
Contact: Beryllium copper or brass
Crimp Sleeve: Brass
Insulator: Delrin®
Plating: Body - Nickel
Crimp sleeve - Nickel
Contact - Gold or nickel
* These values are typical and may not apply to all connectors.
Delrin® is a registered trademark of Dupont Corporation.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
UHF Connectors
For Flexile Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug
Crimp Contact
PART
NUMBER
CPL-259-1
CPL-259-2
CPL-259-7
CPL-259-8
CPL-259-9
CPL-259-10*
CPL-259-16
CPL-259-17
CABLE
TYPE
RG-58
RG-59, 62
RG-58 COPHASE
RG-8
RG-59 COPHASE
RG-TFE-59
PROFLEX RG-450
RG-8X (MINI 8)
“A”
.754 (19.15)
.688 (17.48)
“B”
.810 (20.57)
.810 (20.57)
.694 (17.63)
.820 (20.83)
.696 (17.68)
.710 (18.03)
.696 (17.68)
.710 (18.03)
WIRE
GAUGE
20
22
2/20
13
2/22
20
18
16
WIRE
DECIMAL
.0325
.0253
2/.032
.085
2/.025
.0325
.0403
.0504
JACKET
O.D.
.185-.205
.220-.250
2/.185-.205
.400-.410
2/.220
.205-.220
.220-.250
.225-.250
Assembly instructions on
page 77. *1-Piece
Straight Crimp Type Plug
Crimp Contact, Double Nut
PART
NUMBER
CPL-259-18
CPL-259-24
CABLE
TYPE
RG-58
RG-8
WIRE
GAUGE
20
13
WIRE
DECIMAL
.0325
.085
JACKET
O.D.
.185-.205
.400-.410
Assembly instructions on page 77.
Straight Twist-On Plug
1 Piece
PART
NUMBER
CABLE
TYPE
WIRE
GAUGE
WIRE
DECIMAL
JACKET
O.D.
CPFI-259-1
RG-58
20
.0325
.185-.205
CPFI-259-2
RG-59
22
.0253
.220-.250
CPFI-259-3
BELDEN 8281
18
.0403
.272-.307
CPFI-259-17
RG-8X (MINI 8)
16
.0508
.220-.250
Assembly instructions on page 78.
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
UHF Connectors
For Flexible Cables, Bulkhead And Adapters
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Solder Type Plug
PART NUMBER CABLE TYPE
CP-AD250
RG-8, 213
CP-AD251
RG-8, 213
DESCRIPTION
Standard, PL-259
Hi-Temp Insulation
PART NUMBER CABLE TYPE
CP-AD258
RG-58
CP-AD259
RG-59
DESCRIPTION
Cable Reducer
Cable Reducer
Straight Crimp Type Jack
Connector to Center Conductor Twist-On - 2 Piece
PART
NUMBER
CPF-249-1
CPF-249-2
CABLE
TYPE
RG-58
RG-59, 62
WIRE
GAUGE
20
22
WIRE
DECIMAL
.0325
.0253
JACKET
O.D.
.185-.205
.220-.250
CRIMP
HEX
.320
.320
CRIMP
STRAIN
.211
.250
Assembly instructions
on page 78.
* Requires solid center
conductor.
Straight Twist-On Jack
40 Second Termination - 1 Piece
PART
NUMBER
CABLE
TYPE
WIRE
GAUGE
WIRE
DECIMAL
JACKET
O.D.
CPFI-249-1
RG-58
20
.0325
.185-.205
CPFI-249-2
RG-59, 62
22
.0253
.220-.250
CPFI-249-3
BELDEN 8281
18
.0403
.272-.307
Assembly instructions on page 78.
4-Hole Flange Mount Jack
CP-AD206
4
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
UHF Connectors
Adapters
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Jack to Jack Adapter
CP-AD204
Right Angle Jack to Plug Adapter
CP-AD205
Bulkhead Jack to Bulkhead Jack Adapter
CP-AD207
Jack to Jack to Jack T Adapter
CP-AD210
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
5
Mini-UHF Connectors
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
CP-AD239 4
CP-AD240 4
CP-AD241 4
CP-AD242 4
CP-AD243 4
CP-AD247 3
CP-AD248 3
MINI-UHF-1 3
MINI-UHF-16 3
MINI-UHF-17 3
MINI-UHF-19 3
MINI-UHF-19AS 3
MINI-UHF-2 3
MINI-UHF-IB 3CP-FPM4H 4
4-Hole Flange Mount Jack 4
Adapter 4
For Flexible Cable 3
Specifications* 2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
1
Mini-UHF Connectors
Specifications
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Mini UHF connectors are low cost, general purpose units designed for low frequency
system applications. These commercial quality connectors are equipped with threaded
coupling interfaces for secure and reliable connections. The Standard UHF and Mini
UHF connectors are not intermateable.
Specifications*
MINI UHF
Electrical Characteristics
Impedance: Nonconstant
Frequency range: 0-2 GHz
Working voltage: 500 volts RMS at sea level
Dielectric withstanding voltage: 1500 volts RMS at sea level
Insulation resistance: 5000 megohms minimum
Environmental Characteristics
Recommended temperature range: -55OC to +85OC
Mechanical Characteristics
Durability: 500 cycles
Cable retention: 20 lbs., RG-58 C/U cable
Materials
Body and coupling nut: Zinc or brass
Contact: Brass
Crimp Sleeve: Brass
Insulator: TPX Polymethylpetene
Plating: Body - Nickel
Crimp sleeve - Nickel
Contact - Gold
* These values are typical and may not apply to all connectors.
2
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
Mini-UHF Connectors
For Flexible Cable
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Straight Crimp Type Plug
Solder or Crimp Contact
PART NUMBER
MINI-UHF-1
MINI-UHF-IB
MINI-UHF-2
MINI-UHF-16
MINI-UHF-17
CABLE TYPE
RG-58
RG-58 Black UV Coating
RG-59, 62
PROFLEX RG-450
RG-8X (MINI 8)
“A”
.610 (15.49)
.610 (15.49)
.600 (15.24)
CONTACT I.D.
.044
.044
.034
.055
.065
BODY I.D.
.126
.126
.173
.173
.173
FERRULE I.D.
.206
.206
.261
.261
.261
Straight Crimp Type Plug
Solder or Crimp Contact, 4 Piece
PART NUMBER
MINI-UHF-19
MINI-UHF-19AS
CABLE TYPE
RG-174, 188, 316
RG-174, 188, 316
CONTACT I.D. BODY I.D. FERRULE I.D.
.0245
.110
.110
.0245
.110
.110
TERMINATION
Crimp Insert
Extended Crimp Insert
Straight Crimp Type Plug, Push-On Interface
3 Piece
PART NUMBER
CP-AD248
CABLE TYPE
RG58
CONTACT I.D.
.0325
BODY I.D.
.185-.205
FERRULE I.D.
.213
BODY ID
.185-.205
FERRULE ID
.213
Straight Crimp Type Jack
3 Piece
PART NUMBER
CP-AD247
CABLE TYPE
RG58
CONTACT ID
.0325
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com
3
Mini UHF Connectors
Panel Mount and Adapters
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
4-Hole Flange Mount Jack
CP-FPM4H
Jack to Jack Adapter
CP-AD240
Right Angle Jack to Plug Adapter
CP-AD243
Jack to Jack to Jack T Adapter
CP-AD242
Jack to Jack to Plug T Adapter
CP-AD241
Jack to Push-On Interface Plug Adapter
CP-AD239
4
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-835-6287 • www.cambridgeproducts.com