Sto SE & Co. KGaA Ehrenbachstraße 1 DE-79780 Stühlingen, Germany Declaration of Performance 01-0145-2 according to CPR No. 305/2011 1/3 Declaration of performance No. 01-0145-2 for the construction product StoTherm Classic® 1 MW/MW-L 1. Product type External Thermal Insulation Composite System 2. Batch number see the product packaging 3. Intended use thermal insulation of external walls 4. Manufacturer Sto SE & Co. KGaA, Ehrenbachstr. 1, D-79780 Stühlingen 5. Authorised person not relevant 6. System or systems of evaluation and verification of constancy of performance system 1 for the reaction to fire system 2+ for all other essential characteristics 7. Notified body CSTB Paris NB 0679 has performed the initial type test on reaction to fire under system 3 and issued a test- and classification report WIEN-ZERT NB 1139 carried out an initial inspection of the factory and continuous surveillance, evaluation and recognition of the factory production control in accordance with the System 2+ as well as on the basis of ETAG 004 and issued an EC certificate of conformity. 8. European Technical Assessment ETA-07/0156 StoTherm Classic® 1 MW/MW-L Sto SE & Co. KGaA Ehrenbachstraße 1 DE-79780 Stühlingen, Germany Declaration of Performance 01-0145-2 according to CPR No. 305/2011 2/3 9. Declared performance Essential characteristics Performance Harmonised technical specification Reaction to fire A2-s2,d0, B-s2,d0 and F (according to system configuration) EN 13501-1:2010 Water absorption (Base coat with Finishing coat) < 0,5 kg/m² ETAG 004:2000 Impact resistance Category I bis III (according to system configuration) ETAG 004:2000 Water vapour permeability ≤ 1,0 m to ≤ 2,0 m (according to system configuration) ETAG 004:2000 Release of dangerous substances - in accordance to guidance paper „H“ (Aug. 2002) Bond strength between base coat and insulation product ≥ 0,08 MPa ETAG 004: 2000 Bond strength between adhesive and substrate (concrete) ≥ 0,25 MPa ETAG 004: 2000 Bond strength between adhesive and insulation product (MW panel / MW lamella) ≥ 0,08 MPa ETAG 004: 2000 Hygrothermal behaviour passed ETAG 004: 2000 Freeze / thaw behaviour passed ETAG 004: 2000 10. The performance of the product in accordance with nos. 1 and 2 corresponds to the declared performance in accordance with no. 9. The manufacturer is solely responsible for compiling this declaration of performance in accordance with no. 4. Signed for the manufacturer and on behalf of the manufacturer of: 04.06.2014 Sto SE & Co. KGaA D-79780 Stühlingen, Germany By proxy Dr. Hans Klein / Head of Approvals and Testing Procedures Sto SE & Co. KGaA Ehrenbachstraße 1 DE-79780 Stühlingen, Germany Declaration of Performance 01-0145-2 according to CPR No. 305/2011 3/3 Sto SE & Co. KGaA Ehrenbachstrasse 1 D-79780 Stühlingen, Germany 01-0145-2 07 StoTherm Classic® 1 MW/MW-L ETA-07/0156 External Thermal Insulation Composite System thermal insulation of external walls Reaction to fire A2-s2,d0, B-s2,d0 and F (according to system configuration) Water absorption (Base coat with Finishing coat) < 0,5 kg/m² Impact resistance Category I bis III (according to system configuration) Water vapour permeability ≤ 1,0 m to ≤ 2,0 m (according to system configuration) Release of dangerous substances - Bond strength between base coat and insulation product ≥ 0,08 MPa Bond strength between adhesive and substrate (concrete) ≥ 0,25 MPa Bond strength between adhesive and insulation product (MW panel / MW lamella) ≥ 0,08 MPa Hygrothermal behaviour passed Freeze / thaw behaviour passed 0679