Coating your success
Catalogue
Self-adhesive Materials
Versatility in high quality.
HERMA Self-adhesive Material
Label material
A broad range of standard papers and films are
available for all conventional or digital label printing
processes. Suitable for individual requirements and
special applications.
Adhesives
You’ll find the right adhesive for every material: dispersion adhesives, rubber-based hot-melt adhesives or UVcured acrylate hot-melt adhesives. From permanent and
semi-permanent adhesives to residue-free adhesives.
All adhesives are solvent-free. Moreover, almost all of
our standard adhesives are ISEGA-certified for direct
contact with foodstuffs.
Release liner
HERMA Glassine and Kraft Papers offer the ideal
properties for processing on all typical flat bed and
rotary die cutting machines. They can be used for
labelling machines with optical or mechanical scanning.
Guaranteed quality
We can provide ISO certification for the reliability of our
persistent technological development.
There are many possibilities, but finding the right partner is not so easy.
Send us your enquiries. We will send you proof of our capabilities.
This information has been provided in order to inform you about our products. It does not constitute a warranty
of any particular characteristics or of suitability for a specific kind of use. Unless otherwise agreed, our product
liability is strictly limited to that stated in our General Terms and Conditions of Sale. We reserve the right to
make modifications in the interest of technical progress. Last updated: January 2015
www.herma-material.com
Self-adhesive label stock
Contents
Solutions for any Industry
White uncoated papers
White coated papers
4 – 6
7 – 21
22
23 – 24
Coloured papers
25
Thermal papers
26 – 27
Copy / Laser / Inkjet materials 28 – 29
PE, PP, PO and Polyester films Special label materials
Overlaminating film
For over 100 years, you have been able to count on top
“Made in Germany” quality from HERMA. And Germany
is our choice for the future too. We manufacture our
adhesive materials in Filderstadt, near Stuttgart, in one
of the world’s most advanced facilities.
30 – 32
33
34 – 35
HERMAexquisite 36
HERMA LAM (920) 37
HERMAperfect
38 – 39
Application matrix
for permanent adhesives
40 – 43
HERMAsuperPerm (63S) 44 – 45
HERMAperfectCut (65Tpc) 46
Removable adhesives
47
Adhesives
48 – 58
Release liner
59
Pre-slit rolls
Net width 60
Certificates
61 – 63
3
Self-adhesive label stock
Self-adhesive label stock
le at:
availabl.com
s
t
e
e
h
datas rma-materia
www.he
Label material
Adhesives
removable
PEFC FSC®
Acrylic
42R
42N
semiperm.
permanent
Acrylic
42E
42Upp
62D
63Z






UVA
62Xpc 62Gpt 65Tpc
62A
63B



64B
Hotmelt
UVA
92C
52A
Papers
HERMAwhite (601)

741

HERMAextracoat (242)

772

HERMAwhite super (240)
62N

HERMAcoat opaque (244)
HERMAgloss (245)




745



HERMAgloss super (248)

HERMAgloss B (246)

HERMAlux (261)





HERMApharm G (132)


HERMAcoat greaseproof (228)

HERMAcolor yellow (157), blue (158)
red (159), green (160), grey (150)

HERMAfluor orange (250), red (252)
green (253), yellow (254)



Thermal papers
HERMAtherm K (917)

62Dps

HERMAtherm L (924)

62Dps
HERMAtherm top M (912)

HERMAtherm top R (918)
HERMAtherm D (919)

HERMAtherm P (923)



62Dps

62Dps

62Dps

62Dps

Copy / Laser materials
HERMAlaser sheet (135)

731
HERMAlaser sheet 60 (136)
62Dpc
62Dpc
HERMAlaser sheet 50 (133)
62Z
HERMAlaser continuous (601)
HERMAlaser opaque (127)

741
62Dpc
728
62Dpc
HERMAinkprint bright (211)

HERMAinkprint (137)

These label materials and adhesive combinations listed in this chart are only examples from our large product program.
If you do not find your desired self adhesive material in this chart please contact your personal sales representatives or phone +49 (0)711/7702-0.
4

Self-adhesive label stock
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Self-adhesive label stock
www.he
Label material
Adhesives
removable
Acrylic
FSC®
42R
42N
42E
semiperm.
permanent
Acrylic
42Upp
62D
63Z
UVA
62Xpc 62Gpt 65Tpc
62A
63B
64B
Hotmelt
UVA
92C
52A
Copy / Laser materials
HERMA PE Laser (800)

HERMA PO Laser (801)
64Z

Special label materials
HERMAwhite Duplex (601)

HERMAgold matt (418)

HERMAgold bright (420)

HERMAsilver matt (437)

HERMAsilver bright (440)

HERMAsilver met (460)
HERMAprintex (931)



HERMAsilk (941)
63A
HERMAsilver reverse coated (491)

PE- and PP films
HERMAflex transparent (833)

HERMAflex white (843)

HERMA PE white (850)

HERMA PE white tc (851)

HERMA PE transparent (860)

HERMA PE transparent tc (861)

HERMA PE white matt (870)

HERMA PE transparent matt (871)

HERMA PE white PRINT (810)

HERMA PE Paperprint (812)

HERMA PP Paperprint (813)

HERMA PE Laser (800)

HERMA PP white super tc (881)

HERMA PP white extra tc (880)

HERMA PP 50 transparent tc (885) 50 µm

HERMA PP transparent extra tc (890)

HERMA PP white tc (970)

HERMAtherm PP white 65 (828)

42C

These label materials and adhesive combinations listed in this chart are only examples from our large product program.
If you do not find your desired self adhesive material in this chart please contact your personal sales representatives or phone +49 (0)711/7702-0.
5
Self-adhesive label stock
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Self-adhesive label stock
www.he
Label material
Adhesives
removable
Acrylic
42R
42N
semiperm.
permanent
Acrylic
42E 42Upp 62D
62Z
62X
62Xpc 62Gpt
UVA
65Tpc
62A
63B
64B
Hotmelt
UVA
92C
52A
Polyester films
HERMA PETP white bright (895)

HERMA PETP silver matt SR (995)

HERMA PETP white matt (996)

HERMA PETP transparent matt (997)

HERMA PETP white matt Laser (998)

HERMA PETP transparent matt Laser (999)

HERMA self-adhesive materials with UL certification
One of the most important criteria for supplying the motor industry
is approval for the adhesive material from the UL (Underwriters
Laboratories Inc.), an independent American test organisation that
checks that products meet the relevant consumer protection standards. The following HERMA polyester products meet the requirements
as stipulated in UL Standard 969
Label material
Adhesives
Release liner
HERMA PETP white bright (895)
63B
(517)
HERMA PETP silver SR (995)
63B
(517)
HERMA PETP white matt (996)
63B
(517)
HERMA PETP transparent matt (997)
63B
(517)
HERMAprintex (931)
63B
(523)
You find certificates and further information for certificated TT tapes under:
www.herma-material.com
www.herma-material.de/en/service/certifications-certificates/self-adhesive-materialswith-ul-certification.html
These label materials and adhesive combinations listed in this chart are only examples from our large product program.
If you do not find your desired self adhesive material in this chart please contact your personal sales representatives or phone +49 (0)711/7702-0.
6
HERMAperfect
HERMAperfect
Multi-layer coating technology
This technology involves the simultaneous application of different dispersion adhesives in the coating process. Each adhesive has its own
special properties. Working in combination, they give the customer
added value. An important advantage of HERMAperfect is that its
adhesive properties are not dependent on its processing properties.
When there is only one layer of adhesive, one must choose between
good adhesive properties and good processing properties. When
several adhesive coatings are applied at the same time, one can have
both.
This technology gives HERMA the means to develop and manufacture
new and innovative products.
http://www.herma-material.de/en/adhesives/hermaperfect.html
to
ed layers
From add alue
added v
7
Solutions for any Industry
Sticky solutions for any Industry
HERMA Self-adhesive Materials
Food industry
Logistics industry
p. 10-11
8
p. 12-13
Solutions for any Industry
Chemical industry
Cosmetics industry
p. 14-15
Automotive and electrical industry
p. 16-17
p. 18-19
Pharmaceutical industry
p. 20-21
9
Solutions for any Industry
Self-adhesive Materials for the food industry
“You eat with your eyes” – this is true not only for food, but also for packaging and labels. But appearance is only one factor in
labelling. Food labels can be applied under extremely difficult conditions. Labelling is performed at high speeds and in moist or cold
environments. Blow-on labelling is a non-contact method of application. Labels must be able to cope with all these conditions.
Legal requirements must be considered as well. Adhesives now have to be suitable for use with fatty foodstuffs. In particular,
with conventional packaging it must be ensured that the adhesive and label material do not migrate into the food if the film has
insufficient barrier properties.
Technical requirements:
Legal requirements:
• High tack
• BfR and FDA certification
• Insensitive to moist and cold surfaces
• ISEGA certification for contact with
• Suitable for pasteurisation
• Suitable for deep-freeze labels
foodstuffs with fatty surfaces
• REACH conformity
• No-label look
• Non-contact labelling
• Good perforation qualities
• Oil- and grease-repellent
10
Thanks to HERMA’s new multi-layer coating technology, its adhesives fully meet the
requirements in both areas. The middle layer provides much higher tack while helping
to minimise migration.
Papers
PP films
Flex and PE films
HERMAflex white
843
62Xpc
517
x
x
x
HERMAflex transp.
833
62Xpc
517
x
x
x
Pasteurisation
ISEGA
certification*
Resistant
to oil and
moisture
For moist
and cold
surfaces
Sturdy and
adaptable
Flexible
and pliable
Backing
Adhesive
Material
code
Label
material
Solutions for any Industry
HERMA PE white
850
62Xpc
517
x
x
x
62A
HERMA PE transp.
860
62Xpc
517
x
x
x
62A
HERMA PE white tc
851
62Xpc
517
x
x
x
HERMA PE transp. tc
861
62Xpc
517
x
x
x
HERMA PE white matt
870
62Xpc
517
x
x
x
HERMA PE transp. matt
871
62Xpc
517
x
x
x
HERMA PP white 40
892
62Xpc
517
x
x
x
x
HERMA PP white extra tc
880
62Xpc
517
x
x
x
HERMA PP white extra tc
880
62Gpt
517
x
HERMA PP 50 transp. tc
885
62Xpc
517
x
x
x
x
x
x
x
HERMA PP 50 transp. tc
885
62Gpt
565
x
x
x
HERMA PP transp. tc
980
52A
517
reclosure
x
x
HERMA PP silver tc
891
62Xpc
517
x
x
x
HERMA Overlaminating film
210N
Depending on the label material
HERMAsilver met
460
62D / 62Gpt
523
x
x
HERMAsilver bright
440
62A
523
x
x
HERMAsilver matt
437
62A
523
x
x
HERMAgold bright
420
62A
523
x
x
HERMAgold matt
418
62A
523
x
x
HERMAcoat greaseproof
228
62D
523
HERMAwhite
601
62Gpt
523
x
x
x
x
HERMAextracoat
242
62Gpt
523
x
x
HERMAwhite super
240
62Gpt
523
x
x
HERMAcoat opaque
244
62D
523
x
HERMAgloss
245
62D
523
x
HERMAgloss B
246
62D
523
x
HERMAgloss super
248
62D
523
x
HERMAlux
261
62D
523
HERMAlux W
326
62W
525
x
x
x
x
HERMAmatt W
325
62W
525
x
x
x
HERMAmartelé white
320
62W
525
x
x
x
HERMAtherm K
917
62Gpt
515
x
x
HERMAtherm top M
912
62Gpt
515
x
x
HERMAtherm D
919
62Gpt
515
x
x
* Adhesives with ISEGA-approval for direct contact with foodstuffs.
11
Solutions for any Industry
Self-adhesive Materials for the logistics industry
In logistics smooth operations, prompt delivery and an efficient process chain are essential. Labels play a particularly important
role, because they ensure that each package gets to its recipient. And they must satisfy a wide range of requirements. What
counts is the right combination of label material and adhesive.
Requirements:
• Very good barcode readability
• Extremely good initial tack
• Suitability for low-temperature storage
• Weather resistance
• Saltwater resistance
• Resistance to alkalis and washing processes on transport boxes
• Labelling in low-temperature storage rooms
• Extremely easy to remove, no residue (book labelling)
Thanks to our broad range of products, consisting of a wide variety of label materials and special adhesives, we can provide the right solution for
every application in logistics.
Our new multi-layer coating technology ensures superior adhesive properties even under extremely difficult conditions. In addition, minimal
adhesive tolerances ensure reliability throughout the process chain.
12
Papers
Thermal papers
and films
Non-polar
surfaces
such as
plastic
Removable
from books
and
magazines
Rough
surfaces
Saltwater
resistance
Barcode
and thermal
transfer
printing
Cardboard
Backing
Adhesive
HERMAwhite
601
62Gpt
523
x
x
x
x
HERMAwhite PEFC
740
62Gpt
523
x
x
x
x
HERMAfrankier
164
62D
523
HERMAwhite 170
725
62D
523
x
x
HERMAextracoat
242
62Gpt
523
x
x
HERMAextracoat
242
62K
523
x
x
HERMAextracoat
242
42N
523
removable
x
HERMAextracoat
242
42E
523
x
HERMAextracoat
242
42Upp
523
x
x
x
x
x
removable
removable
HERMAextracoat
242
65Tpc
525
extremely
x
extremely
x
HERMAwhite super
240
62Gpt
523
x
x
x
x
HERMAcoat opaque
244
62Gpt
523
x
x
x
x
HERMAcoat greaseproof
228
62D
523
HERMAgloss
245
62D
523
HERMAsuper 60
232
63Z
523
HERMAtransfer
226
62D
523
HERMAgloss B
246
62D
HERMAlux
Films
Material
code
Label
material
Solutions for any Industry
261
62D
x
x
x
x
x
x
Excellent
results
x
523
x
x
523
Excellent
results
x
x
HERMAtherm BPfree
911
62Gpt
515
HERMAtherm BPfree
911
62Dps
515
x
x
HERMAtherm K
917
62Gpt
515
x
x
HERMAtherm L
917
42R
515
removable
x
x
x
x
x
x
x
HERMAtherm F
925
62Gpt
515
x
x
x
x
HERMAtherm top M
912
62Gpt
515
x
x
x
x
HERMAtherm D
919
62Gpt
515
x
x
x
x
HERMAtherm PP white 65
828
62Xpc
517
x
x
HERMA Overlaminating film
210N
x
Depending on the label material
HERMA PE Laser
800
64B
510
x
x
x
x
HERMA PO Laser
801
64Z
510
x
x
x
x
HERMA PO Laser
801
64B
510
x
x
x
x
13
Solutions for any Industry
Self-adhesive Materials for the chemical industry
Most products used in the chemical industry require certification according to
British Standard 5609 Section 2. To comply with this standard, an affixed, unprinted label must
be able to withstand three months of immersion in seawater without separating from the substrate.
Containers with these labels can therefore be transported by sea without difficulty.
Many HERMA adhesive compounds have easily passed this test and can be used for this purpose.
Additional requirements of the chemical industry:
• Scratch-proof and tear-proof
• Resistant to chemicals
• UV stability
• Weather-proof
• Resistant to moisture, oils and greases
• Resistant to solvents
With its many types of adhesive, HERMA is able to offer you the right solution for even the most critical application.
UV-cured acrylate hot-melt adhesives provide especially strong adhesion, even on highly curved, rough, dusty and oily surfaces.
14
Papers
PETP films
PP films
PO and PE films
weatherproof
UL
certification
Resistance
against
oil and
moisture
TT
printability
Saltwater
resistance
as per
BS5609
Section 2
Backing
Adhesive
Material
code
Label
material
Solutions for any Industry
HERMA PO Laser
801
64Z
511
x
Laser
x
x
HERMA PO Laser
801
64B
511
x
Laser
x
x
HERMA PE Laser
800
64B
510
x
Laser
x
x
HERMA PE white
850
62B
517
x
x
x
HERMA PE transp.
860
62B
517
x
x
x
HERMA PE white tc
851
62B
517
x
x
x
HERMA PE transp. tc
861
62B
517
x
x
x
HERMA PE transp. matt
870
62B
517
x
x
x
HERMA PE white PRINT
810
63B
517
x
x
x
HERMA PE Paperprint
812
63B
517
x
x
x
x
HERMA PP white extra tc
880
62Xpc
517
x
x
x
HERMA PP white extra tc
880
65Tpc
525
x
x
x
HERMA PP 50 transparent tc
885
63S
525
x
x
x
x
x
x
HERMA PP white 40
892
62Xpc
517
HERMA PP Paperprint
813
63B
517
HERMA Overlaminating film
210N
HERMA PETP white gloss
895
63B
517
x
x
x
x
x
HERMA PETP silver SR
995
63B
517
x
x
x
x
x
HERMA PETP white matt
996
63B
517
x
x
x
x
x
HERMA PETP transp. matt
997
63B
517
x
x
x
x
HERMA PETP white matt Laser
998
62Z
511
x
Laser
x
x
HERMA PETP transp. matt Laser
999
62Z
511
x
Laser
x
x
HERMAprintex
931
63B
523
x
x
x
HERMAprintex
931
63B
512
x
Laser
x
HERMAwhite
601
63B
523
x
x
x
Depending on the label material
HERMAextracoat
242
63B
523
x
HERMAwhite super
240
65Tpc
525
x
HERMAcoat greaseproof
228
62D
523
x
HERMAlux
261
63B
523
x
x
x
x
x
x
HERMAlux W
326
62W
525
x
x
HERMAmatt W
325
62W
525
x
x
15
Solutions for any Industry
Self-adhesive Materials for the automotive and
electrical industry
The requirements in the automotive and electrical industry are very stringent and diverse. Machinery, equipment and technical
components must be labelled under extreme conditions. Our adhesives are resistant to abrasion, heat and chemicals. The labels
adhere firmly even when exposed to moisture and temperature fluctuations.
HERMA adhesive materials with UL certification
Underwriters Laboratories Inc. (UL) is an independent testing institute in the USA that inspects products for compliance with
consumer protection standards. UL certification is an essential criterion for products supplied to the American automotive
industry. HERMA offers you a wide range of UL-certified adhesives.
Applications:
Requirements:
• Barcode labels
• High scratch and smudge resistance
• Paint mask labels
• UL-certified
• Engine compartment labels
• Conformity with REACH
• Product labels
• Temperature resistance
• Security labels
• Saltwater resistance
• Tamper-evident labels (original closure)
• Rough substrates
• Transport labels
• Very good TT printability
• Rating plates
• Resistant to oil and moisture
• Equipment and machinery labels
• Conformity with RoHs
• VDA labels
With its many types of adhesive, HERMA is able to offer you the right solution for even the most critical application.
UV-cured acrylate hot-melt adhesives provide especially strong adhesion, even on highly curved, rough, dusty and oily surfaces.
16
Papers
PETP films
PP films
Backing
Saltwater
resistance as
per BS5609
Section 2
Adhesive
UL
certification
Resistance
against oil
and moisture
Material
code
TT printability
Label
material
PO and PE films
Solutions for any Industry
HERMA PO Laser
801
64Z
511
Laser
x
x
HERMA PO Laser
801
64B
511
Laser
x
x
HERMA PE Laser
800
64B
510
Laser
x
x
HERMA PE white
850
62B
517
x
x
x
HERMA PE transp.
860
62B
517
x
x
x
HERMA PE white tc
851
62B
517
x
x
x
HERMA PE transp. tc
861
62B
517
x
x
x
HERMA PE transp. matt
870
62B
517
x
x
x
HERMA PE white PRINT
810
63B
517
x
x
HERMA PE Paperprint
812
63B
517
x
x
x
HERMA PP white extra tc
880
62Xpc
517
x
x
x
HERMA PP white extra tc
880
65Tpc
525
x
x
x
HERMA PP 50 transp. tc
885
63S
525
x
x
HERMA PP white 40
892
62Xpc
517
x
x
HERMA PP Paperprint
813
63B
517
x
x
x
HERMA Overlaminating film
210N
HERMA PETP white gloss
895
63B
517
x
Depending on the label material
x
x
x
HERMA PETP silver SR
995
63B
517
x
x
x
x
HERMA PETP white matt
996
63B
517
x
x
x
x
HERMA PETP transp. matt
997
63B
517
x
x
x
x
HERMA PETP white matt Laser
998
62Z
511
Laser
x
HERMA PETP transp. matt Laser
999
62Z
511
Laser
x
HERMAprintex
931
63B
523
x
x
HERMAprintex
931
63B
512
Laser
x
HERMAwhite
601
63B
523
x
HERMAextracoat
242
63B
523
x
HERMAwhite super
240
65Tpc
525
x
HERMAextracoat
242
42E
523
x
HERMAcoat greaseproof
228
62D
523
x
HERMAlux
261
63B
523
x
HERMAlux W
326
62W
525
x
x
HERMAmatt W
325
62W
525
x
x
x
x
x
x
x
x
17
Solutions for any Industry
Self-adhesive Materials for the cosmetics industry
In the cosmetics industry, labels have to do more than just convey information. In no other sector are label appearance and
design so important. Labels are a primary means of advertising: they communicate the brand image, attract attention and
influence buying decisions.
In addition to design, the following physical properties are required:
CInsensitivity to water
CResistance to cleaning agents
COil repellence
CGood adhesion on small radii
CDurability
CMetallic look (high-quality appearance)
CHigh transparency
CFlexibility and pliability
CRuggedness
HERMA adhesive materials help cosmetic labels keep their decorative appearance even in tough day-to-day use.
HERMA’s new multi-layer coating technology guarantees excellent
stamping results, with no bleeding of adhesive. Minimal adhesive
tolerances ensure reliable production.
HERMA adhesives not only ensure reliable adhesion to the product
and easy dispensing, they are friendly to label printers.
18
In addition, most adhesives are certified for direct contact with
foodstuffs with fatty surfaces and are therefore safe to use.
Papers
PP films
Flex and PE films
Suitable for
small radii
ISEGA certification*
Resistance
against oil
and moisture
Metallic
effect
Sturdy and
adaptable
Flexible
and pliable
Backing
Adhesive
Material
code
Label
material
Solutions for any Industry
HERMAflex white
843
62Xpc
517
x
x
x
x
HERMAflex transp.
833
62Xpc
517
x
x
x
x
HERMA PE white
850
62Xpc
517
x
x
x
62Z
HERMA PE transp.
860
62Xpc
517
x
x
x
62Z
HERMA PE white tc
851
62Xpc
517
x
x
x
62Z
HERMA PE transp. tc
861
62Xpc
517
x
x
x
62Z
HERMA PE white matt
870
62Xpc
517
x
x
x
62Z
HERMA PE transp. matt
871
62Xpc
517
x
x
x
62Z
HERMA PP white 40
892
62Xpc
517
x
x
x
x
HERMA PP white extra tc
880
62Xpc
517
x
x
x
HERMA PP white tc
970
62Xpc
517
x
x
x
HERMA PP transp. tc
885
62Gpt
565
x
x
x
HERMA PP transp. tc
980
42C
517
x
x
HERMA PP transp. extra tc
890
62Xpc
517
x
HERMA PP silver tc
891
62Xpc
517
x
x
x
x
x
x
HERMA Overlaminating film
210N
HERMAsilver met
460
62D
523
Depending on the label material
x
x
HERMAsilver gloss
440
62A
523
x
x
HERMAsilver matt
437
62A
523
x
x
HERMAgold gloss
420
62A
523
x
x
HERMAgold matt
418
62A
523
x
HERMAcoat greaseproof
228
62D
523
x
x
x
x
HERMAsuper 60
232
63Z
525
HERMAextracoat
242
62Gpt
523
x
x
HERMAwhite super
240
62Gpt
523
x
HERMAcoat opaque
244
62D
523
x
HERMAgloss
245
62D
523
x
HERMAgloss B
246
62D
523
x
HERMAgloss super
248
62D
523
x
HERMAlux
261
62D
523
x
HERMAlux W
326
62W
523
x
x
x
* Adhesives with ISEGA-approval for direct contact with foodstuffs.
19
Solutions for any Industry
Self-adhesive Materials for the pharmaceutical industry
In no other industry is reliable, accurate product identification of such critical importance. And it’s not just a matter of ensuring
that the product information is correct. The labels must also work flawlessly. This requires conscientious, professional attention
throughout the supply chain.
Thanks to state-of-the-art multi-layer coating technology, HERMA is able to apply adhesives with extreme precision and very
low tolerances (±1.5 g/m²). This technology also makes it possible to determine the tack and processing properties.
Our standard adhesives 62A, 62D, 62Z, 63B and 63Z are ISEGA-certified for direct labelling of blood bags. All of our standard
adhesives are ISEGA-certified for direct contact with foodstuffs, which means they are safe in every way.
Requirements:
Applications:
• Extremely strong adhesion
• Primary packaging
• Labelling of curved surfaces with small radii
• Direct labelling of blood bags
• Labelling around corners
• Sealing labels
• Tamper-proof
• Original closures and security labels
• Resistance to damage
• ISEGA certification for direct labelling of blood bags
(tamper-evident)
• Labels for blood collection tubes, syringes and vials
Our newest adhesive, HERMAsuperPerm 63S, was developed in our laboratory especially for original closures and security labels. Its excellent
adhesion makes it superior to other, more expensive solutions.
20
Backing
ISEGA certification*
TT
printability
62Xpc
517
x
x
x
HERMAflex transparent
833
62Xpc
517
x
x
x
HERMA PE white
850
62Xpc
517
62Z
x
x
HERMA PE transp.
860
62Xpc
517
62Z
x
x
HERMA PE white tc
851
62Xpc
517
62Z
x
x
HERMA PE transp. tc
861
62Xpc
517
62Z
x
x
HERMA PE white matt
870
62Xpc
517
62Z
x
x
HERMA PE transp. matt
871
62Xpc
517
62Z
x
x
HERMA PE white PRINT
810
63B
517
x
x
x
HERMA PE Paperprint
812
63B
517
x
x
x
HERMA PP white extra tc
880
62Xpc
517
x
x
HERMA PP white extra tc
880
65Tpc
525
HERMA PP 50 transparent
885
63S
517
HERMA PP white 40
892
62Xpc
517
HERMA PP Paperprint
813
63B
525
HERMA Overlaminating film
210N
HERMApharm G
132
63Z
525
x
x
x
x
HERMAwhite super
232
63Z
525
x
x
x
x
HERMAwhite super
232
63S
525
x
HERMAwhite
601
62D
523
x
x
x
HERMAextracoat
242
62D
523
x
x
x
HERMAwhite super
240
65Tpc
525
HERMAcoat opaque
244
62Gpt
523
HERMAlux
261
62D
523
x
Direct labelling of blood
bags
Adhesive
843
Tamper evident
labels
Material
code
HERMAflex white
Curved surfaces with
small
Label
material
Papers
PP films
Flex and PE films
Solutions for any Industry
x
x
x
x
x
x
x
x
x
Depending on the label material
x
x
x
x
x
x
x
x
* Adhesives with ISEGA-approval for direct contact with foodstuffs.
21
White uncoated papers
le at:
availabl.com
s
t
e
e
h
datas rma-materia
White uncoated papers
www.he
Mat. no.
Weight
g/qm
HERMAwhite
601
72
White machine-finished label paper
HERMAfrankier
164
80
White label paper, highly absorbent, for printing and rubber-stamp ink
HERMAwhite
725
170
White calendered thin card board with optical brightening agents
Label material
Brief description
PEFC
FSC®

741
HERMAwhite (601)
 75 g/m²
 Good printing quality in all common printing techniques
 Good thermal transfer print quality
 Suitable for laser printing
 Complies with BfR recommendations XXXVI for contact with
dry and/or greasy food
Examples:
 Barcode-labels for logistics
 VIP labels
 Laser endless applications
22
White coated papers
le at:
availabl.com
s
t
e
e
h
datas rma-materia
White coated papers
Label material
HERMAextracoat
Mat. no.
Weight
g/qm
242
80
www.he
Brief description
White label paper, semi-gloss coated on one side
HERMAwhite super
240
80
White label paper, semi-gloss coated on one side
HERMAsuper 60
232
60
White label paper, semi-gloss coated on one side
HERMAcoat opak
244
91
Coated white midgloss label paper with an opaque reverse side coating
HERMAcoat greaseproof
228
80
White label paper, semi-gloss coated on one side with good grease
resistance
HERMAgloss
245
80
White label paper, gloss coated on one side
HERMAgloss B
246
85
White label paper, gloss coated on one side
HERMAgloss super
248
80
White label paper, high-gloss coated on one side
HERMAlux
261
80
White label paper, cast-coated on one side, with extremely high
surface gloss
HERMAlux W
326
80
White, high gloss cast-coated, wet strength label paper
HERMAtransfer
226
80
White special coated paper with extra matt and smooth surface for
high-speed thermal transfer printing
HERMAmatt W
325
90
White, matt coated, wet strength, alkali resistant and anti-mould treated
label paper
HERMApharm G
132
62
White label paper, semi-gloss coated on one side, specially for the pharmaceutical field
PEFC
FSC®

772


745

HERMAextracoat (242)
 Grammage: 80 g/m²
Machine-coated
 Gloss [60°]: approx. 30%
 Can be printed with all conventional processes
 Excellent results with thermal transfer printers
 The paper complies with BfR XXXVI recommendations for
direct contact with dry and non fatty food
Examples:
 High-quality 8-colour printing
 Product labels
23
White coated papers
Print quality in the common printing techniques on
coated surfaces
Quality on Coated Surfaces . . .
. . . regarding printability.
261
248
245
246
When changing from one grade to another changes to the print image
are likely, regardless of using the same printing technique, print parameters,
ink type and ink preparation.
244 / 242 / 240
Quality of thermal transfer imprint
226
Quality of thermal transfer. . .
in ascending order
261
248
Printability
245 / 246
244
240 / 242
601
This order could vary when using different thermal transfer ribbons,
printers or printing parameters.
Quality
Paper finishing: What‘s the reason for coating papers?
 Compact paper surface
 Higher gloss
 Higher smoothness
 Higher whiteness
24
For natural and sharp reproduction of
multi-colour masters
Coloured papers
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Coloured papers
Label material
HERMAcolour grey
www.he
Mat. no.
Weight
g/qm
150
78
Brief description
PEFC
FSC®
Grey penetration dyed, calendered label paper

HERMAcolour yellow
157
78
Yellow penetration dyed, calendered label paper

HERMAcolour blue
158
78
Blue penetration dyed, calendered label paper

HERMAcolour red
159
78
Red penetration dyed, calendered label paper

HERMAcolour green
160
78
Green penetration dyed, calendered label paper

Fluorescent papers
Label material
Mat. no.
Weight
g/qm
Brief description
PEFC
FSC®
HERMAfluor orange
250
80
Label paper with orange fluorescent coat on one side

HERMAfluor red
252
80
Label paper with red fluorescent coat on one side

HERMAfluor green
253
80
Label paper with green fluorescent coat on one side

HERMAfluor yellow
254
80
Label paper with yellow fluorescent coat on one side

25
Thermal papers
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Thermal papers
Label material
Protective
coating
www.he
Mat. no.
Weight
g/qm
Brief description
PEFC
FSC®
HERMAtherm BPfree

911
72
White, bisphenol-free thermal paper without protective surface coat (“economy quality”)
HERMAtherm K

917
70
White thermal paper without protective surface coat
(“economy quality”)
HERMAtherm L

924
71
White thermal paper without protective surface coat
(“economy quality”)
HERMAtherm F
 
925
77
White thermal paper with protective surface coat on one side and increased
thermal sensitivity
(“standard top quality without back side coat”)

HERMAtherm top M
 
912
73
White thermal paper with protective surface coat on one side
(“standard top quality without back side coat”)

HERMAtherm D
  
919
75
White thermal paper with protective top and reverse coat
(“standard top quality” with back side coat”)

HERMAtherm P
  
923
76
White thermal paper with protective top and reverse coat
(“standard top quality” with back side coat”)
 = Without protective coating
  = Top protection coating
   = Top and back side protection coating
26

Thermal papers
Operating Mode of Thermal Papers
colourless
leucodye
colourless
developer
thermal head
temperature sensitive
thermal coating
pre-coating (primer)
base paper
+
+ warmth =
Different Qualities of Thermal Paper
economy-quality
thermal layer approx. 3 – 6 g/m2
pre-coating approx. 10 g/m2
base paper
top-quality
protection layer approx. 5 g/m2
thermal layer
pre-coating
base paper
back barrier
27
Copy / Laser / Inkjet materials
Copy / Laser / Inkjet materials
le at:
availabl.com
s
t
e
e
h
datas rma-materia
www.he
Mat. no.
Weight
g/qm
HERMAlaser sheet
135
68
White label paper with special characteristics for excellent printability on laser
printers and copiers
HERMAlaser sheet 50
133
50
White label paper with special characteristics for excellent printability on laser
printers and copiers
HERMAlaser Continuous
601
72
White, calendered label paper
HERMAlaser opaque
127
83
White, opaque label paper with purple reverse coat for excellent
printability on laser printers and copiers
HERMAlaser Copy/Laser
138
90
White, opaque label paper with excellent printability on laser printers
and copiers
HERMA PE Laser
800
110
White label paper with special characteristics for excellent printability on laser
(178 µm) printers and copiers
HERMA PO Laser
801
110
White label paper with special characteristics for excellent printability on laser
(110 µm) printers and copiers
HERMAlaser Recycling
167
80
White label paper made of 100 % recovered paper with high degree of whiteness
for laser and inkjet printers
HERMAinkprint
137
95
White, with a special matt surface line the provided
Inkjet paper
HERMAinkprint bright
211
86
White, inkjet paper with a special glossy surface coat
Label material
Brief description
PEFC
FSC®

731

728
HERMA PE laser (800) and HERMA PO laser (801)
Printable with laser printers
Offers an excellent quality with all traditional printing
methods; best results in flexo printing water or solvent
based inks
Complies with all requirements of BS 5609/II
(resistance to sea water)
Standard adhesive: 64B/64Z
Standard liner: 510
Applications:
Labelling of drums or pallets and Containers for the chemical industry
28
Copy / Laser / Inkjet materials
Material / Application notes
Grammage
approx. [g/m2]
Laser printing
black
Colour laser
printing
Inkjet
printing
Weathering
resistance
HERMAlaser sheet (135 / 730 PEFC / 62D / 512)
 Xerographic paper
 Wrap-around-labelling; Clinical use
 All round qualification for copiers, laser printers and inkjet printers
135
+
+
+
–
HERMA copy/laser color (138 / 62D / 512)
 Xerographic paper
 All round qualification for copiers, laser printers and inkjet printers
 Outstanding whiteness and higher grammage
 Excellent colour laser printouts
165
+
+++
+
–
HERMAlaser opaque (127 / 727 PEFC / 62D / 512)
 Xerographic paper
 High Opacity e.g. for spine labels
 All-round qualification for copiers, laser printers and inkjet printers
170
+
+
+
–
HERMAlaser Continuous (601 / 62D or 42N / 527)
 Applicable for cut-sheet and continuous-feed laser printers,
especially when a stronger liner is required
 Good printing quality in all common printing techniques
165
+
+
–
–
HERMA piggy back (135 / 62A / 512 / 62A / 527)
 Special construction
 Reserved to selected laser printers because of the
high grammage
Media transport through printer possibly insufficient
230
+/–
+/–
+
–
HERMA inkprint (137 / 62D / 512)
 Paper with matt coating specialized for inkjet printing
 Use for high-resolution inkjet printers
 Photo quality printing
160
–
–
HERMA inkprint gloss (210 / 62D / 512)
 Paper with high gloss coating specialized for inkjet printing
 Use for high-resolution inkjet printers
 Photo quality printing
151
–
–
HERMA PO Laser (801 / 64Z / 511 )
• Special PE film with UV adhesive
• Labelling of drums or pallets
• Soft and extensible
265
+
+
+/–
+
HERMA PE laser (800 / 64B / 510)
 Special PE film with UV adhesive
 Labelling of drums or pallets
 Soft and extensible
 As laser printable as 80 g/m2 white paper
230
+
+
+/–
+
HERMAlaser Recycling (167)
 Identical to uncoated, wood-free paper in whiteness and appearance.
 High Opacity and good sheet form
 Processing like wood-free nature paper
80
+
+
+
–
+++
photorealistic
+++
photorealistic
–
–
29
PE, PP, PO and Polyester films
le at:
availabl.com
s
t
e
e
h
datas rma-materia
PE, PO films
www.he
Label material
Mat. no.
Thickness
µm
HERMA PE white
850
82
White gloss polyethylene film with corona pre-treatement
HERMA PE white tc
851
82
White gloss polyethylene film with special surface treatment for better
printability
HERMA PE transparent
860
82
Transparent glossy polyethylene film with corona pre-treatement
HERMA PE transparent tc
861
82
Transparent glossy polyethylene film with special surface treatment for better
printability
HERMA PE white matt
870
82
White matt, polyethylene film specially for imprint with thermal transfer printer
HERMA PE transparent matt
871
82
Transparent, matt polyethylene film specially for imprint with thermal transfer
printers
HERMA PE white PRINT
810
85
White matt polyethylene film with special surface treatment for better
printability, suitable for later inscription onto the label
HERMA PE Paperprint
812
105
White matt polyethylene film with special surface treatment for better
printability, suitable for later inscription onto the label
HERMA PE Laser
800
178
White matt, polyethylene film highly filled with non abrasive silicates, suitable
for laser printers
HERMA PO Laser
801
110
White, matt, filled, polyolefin film, suitable for laser printing
30
Brief description
PE, PP, PO and Polyester films
le at:
availabl.com
s
t
e
e
h
datas rma-materia
PP films
www.he
Mat. no.
Thickness
µm
HERMAflex transpartent
833
55
Transparent, glossy, biaxially oriented polypropylene film with
special surface treatment for good printability
HERMAflex white
843
55
White, glossy, biaxially oriented polypropylene film with special
surface treatment for good printability
HERMA PP white extra tc
880
60
White glossy polypropylene film, biaxially oriented, with special
surface treatment for better printability
HERMA PP white super tc
881
60
White glossy polypropylene film, biaxially oriented, with special
surface treatment for better printability
HERMA PP white tc
970
60
White glossy opaque polypropylene film, biaxially oriented,
with special surface treatment for better printability
HERMA PP white 40
892
40
White glossy, biaxial oriented, with corona pretreatement
polypropylene film.
HERMA PP 50 transparent tc
885
50
Transparent glossy polypropylene film, biaxially oriented,
with special surface treatment for better printability
HERMA PP transparent extra tc
890
59
Transparent glossy polypropylene film, biaxially oriented,
with special surface treatment for better printability
HERMA PP silver tc
891
50
Silver-coloured glossy polypropylene film, biaxially oriented,
with special surface treatment for better printability
HERMA PP Paperprint
813
80
White, matt, opaque, corona treated polypropylene film
HERMAtherm PP white
828
65
White direct thermal film with protective top coat
Label material
Comparsion of base polymers
PE
Brief description
Service temperature range of films
PP
PET(P)
PE films
-20 up to + 60 °C
max. short time 90°C



PP films
-30 up to + 70 °C
max. short time 100 to 110°C



PET films
-50 up to + 150 °C
max. short time 200°C
Shrinkage



Flexibility






Chemical resistance
Resistance against humidity
Transparency
31
PE, PP and Polyester films
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Polyester films
www.he
Mat. no.
Thickness
µm
HERMA PETP white bright
895
50
White glossy opaque polyester film, weatherproof with special surface treatment
for excellent printability, suitable for laser printers and thermal transfer printers
HERMA PETP silver SR
995
55
Silver-coloured, matt polyester film with extremely resistant surface
HERMA PETP white matt
996
60
White, matt polyester film, with special surface treatment for better printability
HERMA PETP transparent matt
997
60
Matt, transparent polyester film with special surface treatment for better
printability
HERMA PETP white matt Laser
998
60
White, matt polyester film, with special surface treatment for better printability
HERMA PETP transparent matt Laser
999
60
Transparent, matt polyester film, with special surface treatment for better
printability
Label material
Brief description
HERMA self-adhesive materials with UL certification
One of the most important criteria for supplying the motor industry is approval for
the adhesive material from the UL (Underwriters Laboratories Inc.), an independent
American test organisation that checks that products meet the relevant consumer
protection standards. The following HERMA polyester products meet the requirements as stipulated in UL Standard 969
Label material
Adhesives
Release liner
HERMA PETP white bright (895)
63B
(517)
HERMA PETP silver SR (995)
63B
(517)
HERMA PETP white matt (996)
63B
(517)
HERMA PETP transparent matt (997)
63B
(517)
HERMAprintex (931)
63B
(523)
You find certificates and further information for certificated TT tapes under:
www.herma-material.com
32
Special label materials
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Special label materials
www.he
Mat. no.
Weight
g/qm
HERMAgold matt
418
85
Gold-coloured matt aluminium foil with UV-resistant “vinyl” surface varnish,
laminated to white paper
HERMAgold bright
420
85
Gold-coloured glossy aluminium foil with UV-resistant “vinyl” surface varnish,
laminated to white paper
HERMAsilver matt
437
85
Silver-coloured matt aluminium foil with UV-resistant “vinyl” surface varnish,
laminated to white paper
HERMAsilver bright
440
85
Silver-coloured matt aluminium foil with UV-resistant “vinyl” surface varnish,
laminated to white paper
HERMAsilver met
460
83
Silver coloured, metallised label paper with glossy protective varnish
HERMAsilver matt reverse coated
491
85
White label paper with aluminium back barrier layer, extremely opaque
HERMA LAM
920
73
Laser-activatable material
HERMAtyvek
927
75
White, durable nonwoven, 100 % polyethylene fibres, extremely resistant to
tearing
HERMAprintex
931
100
White, impregnated, weatherproof special label paper, glossy coated on one side,
made of natural and synthetic fibres without optical brightener
HERMAsilk
941
125
White, shiny, very flexible acetate silk particularly suitable for labelling of flexible
materials
Label material
Brief description
FSC®

33
Overlaminating film
HERMA Overlaminating film
n
protectio
Optimum
!
ls
be
for your la
The perfect protection for your labels
HERMA overlaminating film has no backing and is self-wound. It is coated
with a permanent acrylate adhesive and was specially developed for in line
overlamination of printed label materials.
Provides optimum protection against:
• Mechanical stress
• Grease and oils
• Moisture
• Friction
Now you can manufacture paper labels that can be widely used even in harsh
and critical environments – HERMA overlaminating film makes it possible.
The film protects labels against mechanical stress (such as friction) as well as
moisture, grease and oils.
The HERMA range of overlaminating films
34
Name of material
Material no.
Thickness
in µm
Overlaminating film
gloss clear
210N
20 µm
Overlaminating film
matt clear
217N
25 µm
Exact widths
at 2,000 l.m./roll
ü
Useful widths of
400 and 500 mm
Overlaminating film
e
us
Easy to
Once loaded on to a spare mandrel,
the film is ready to use.
The film is placed on the unwinder and is ready to use.
HERMA overlaminating film is an commercial alternative
to expensive special materials and less reliable protective coatings.
ths at
Exact wid
./roll
2,000 l.m
The advantages at glance:
• Protection of labels
• No backing material, no waste
• No protective coatings needed
(this frees a coating unit)
• Quick set-up, fast changing
• Suitable for thermal transfer printing*
Glossy clear overlaminating film 210N is available
in 2,000 l.m. rolls with delivery of exact widths
• Matt grade is writable with ballpoint pen
• Improved label strength in dispensing
• Better stiffness for resealable labels
• More vivid colours
d noise
Minimise
The noise compensator
reduces noise to a
minimum.
* testing and qualification recommended
35
HERMAexquisite wine range
le at:
availabl.com
s
t
e
e
h
datas rma-materia
HERMAexquisite wine range
Label material
www.he
Mat. no.
Adhesives
Brief description
HERMAline ivory
300
62W
Ivory-coloured, uncoated, wet strength label paper with “channelled” embossing
(cross direction)
HERMAlinen ivory
305
62W
Ivory-coloured, uncoated, wet strength label paper with linen finish
HERMAlaid ivory
310
62W
vory-coloured, uncoated, laid, wet strength label paper
HERMAfelt cream
315
62W
Cream-coloured, uncoated, textured, wet strength label paper
HERMAfelt white brut
316
62W
White (pure ECF pulp), uncoated, textured, wet strength label paper
HERMAmartelé white
320
62W
White, uncoated, wet strength label paper with “hammered” embossing (handmade appearance and feel)
HERMAmartelé cream
321
62W
Cream-coloured, uncoated, wet strength label paper with “hammered” embossing (handmade appearance and feel)
HERMAmatt W
325
62W
White, matt coated, wet strength, alkali resistant and anti-mould treated label
paper
HERMAlux W 326
326
62W
White, high gloss cast-coated, wet strength label paper
HERMApearly sun
330
62W
Pearlescent coated, wet strength label paper with fine embossing
HERMAexquisite – the very finest for your wines
The new HERMAexquisite wine range changes the whole look of a wine
bottle, lending it exquisite character.
The new HERMAexquisite 62W
adhesive is an exclusive product
that was specially developed
for use on wine bottles.
www.herma-material.de
/en/label-material/
hermaexquisite.html
36
HERMA LAM (920)
Laser activatable Material
HERMA LAM is label paper which has been specially developed for use with CO2
lasers (colour change from white to black). Since the CO2 laser does not come into
contact with the labels, it produces no residual products which might smudge and
does not damage the paper.
HERMA LAM (920)
Laser-activatable Material
HERMA GmbH, Filderstadt
11 : 43 : 10
20.04.2011
Sample label 2,4 Sec
0000000286
www.herma-material.com
Thanks to its protective layer, HERMA LAM can be used for all applications which
require labels in smudge-proof and scratch-proof paper and which are resistant to
solvents and grease. This makes HERMA LAM ideal for difficult, dusty production
conditions.
Greater flexibility,
higher productivity
4 008705 876049
HERMA LAM (920)
customised printing
HERMA GmbH, Filderstadt
11 : 43 : 10
20.04.2011
Sample label 2,4 Sec
Using a CO2 laser allows flexible, customised printing at any point during
processing – on or off the production line, and before or after label distribution.
0000000286
4 008705 876049
CO2 lasers do not come into contact with the label and require little maintenance.
This has been demonstrated to perceptibly reduce idle times. Moreover, printing
can be carried out directly at the dispensing edge, allowing controlled allocation
of labels to products.
Advantages
• Smudge-proof, scratch-proof
• Suitable for difficult production
conditions
See for
yourself!
• Fast, accurate labelling
• Reliable, low-maintenance labelling
technology
• High contrast, sharp, precise edges
www.youtube.com/watch?v=I7y0exK7nrs
• No consumables
• Ideal for text, graphics and barcodes
for all print orientations
• Good ageing resistance
37
HERMAperfect
HERMAperfectCut (62Xpc)
This film adhesive makes wishes come true!
The innovative film adhesive 62Xpc not only improves the processing
properties of self-adhesive films, it also provides better adhesion.
Once applied, the adhesive is resistant to moisture, soap and oil
thanks to the specially developed middle layer. This makes it especially suitable for labelling body care products and cosmetics. The
adhesive is also ISEGA-certified for direct contact with foodstuffs
with fatty surfaces.
g
processin
nhanced
!
n
io
s
e
Greatly e
h
d
s and a
propertie
HERMAperfectTack (62Gpt)
The standard specialist for cool and moist surfaces!
The characteristics of the 62Gpt dispersion adhesive make it suitable as a standard adhesive for critical applications. It combines the
adhesive properties of a hot-melt adhesive (rubber-based) with the
advantages of a dispersion adhesive.
Advantages:
•Secure adhesion to moist surfaces
•Application temperature down to -10°C
•Service temperature from -30°C to 80°C
•Very high initial adhesion (tack), especially at low temperatures
•Excellent for wrap-around labelling
•ISEGA certification for direct contact with foodstuffs with fatty
surfaces
•Excellent converting without adhesive bleeding
•Decreasing diversity of varieties
38
k
initial tac
Excellent res down
tu
ra
at tempe
to -10°C
HERMAperfect
HERMAperfectCut (62Dpc)
Perfect for laser printers!
The 62Dpc adhesive represents another important innovation.
The adhesive will not bleed out at the die-cut edges because of
the use of a new specially developed second adhesive layer.
s
dge make
A clean e
!
ce
n
the differe
Adhesion is unaffected. This makes it perfect for laser printers,
even when using sheets without a protective edge. The adhesive
is also ISEGA-certified for direct contact with foodstuffs with fatty
surfaces.
HERMAperfectStick (62Dps)
Stop Migration!
t
ct contac
ht for dire
s
Green lig
stuff
with food
We are constantly looking for new ways to manufacture adhesives
with no migration properties.
The new 62Dps dispersion adhesive represents a big step towards
this goal. The 62Dps has been tested and approved for direct contact
with foodstuffs by the ISEGA, an independent international testing
institute. The adhesive layer can make direct contact with dry, moist
and fatty foods. In addition, the adhesive properties have been
enhanced by our multi-layer coating technology. The tack (initial adhesion) is much greater, especially on cardboard and plastic surfaces.
39
Application matrix for permanent adhesives
Application matrix for permanent adhesives
HERMAperfect
(Multi-layer
adhesives)
- 62Gpt
- 62Dpc
- 62Xpc
Acrylate
adhesives
- 62D
- 63Z
sive
ght adhe
Find the ri
ti
pplica on
for your a
UVAadhesives
- 62A
- 63B
Application
matrix
Factors to keep in mind:
• Dispensing speed?
• Temperature of application?
• Service temperature?
• Substrate properties (polar / non-polar)
Hot-melt
adhesives
- 92C
• Expected adhesion?
• Substrate form (e.g. small diameter)?
• Stress?
• Condensation? / moisture?
Polarity (static charge)
....
Non-polar
0 mN/m
40
Polar
45 mN/m
400 mN/m
Application matrix for permanent adhesives
Tack
Contact time < 0,1s
< 0,1s
Room temperature
Adhesive
62Gpt
62Dps
62Xpc
62D
62A
63Z
63B
92C
Non-polar
•
•
•
•
•
•
•
•
• • •
• •
• •
• • •
• • •
• •
• •
• • •
Temperature at
Polar
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
0°C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Surface
45°C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
• •
• •
• •
• •
• •
• •
Rough
•
•
•
•
•
•
•
•
• • •
• • •
• •
• • •
• • •
• •
• •
• • •
Condensation
Smooth
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
dry
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
••
• •
• •
• •
• •
• •
Moist
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
• •
• •
• •
•
•
• •
Examples of applications:
• Blow-on labelling
• High-speed labelling
• Labelling of moist surfaces
• Labelling of cold surfaces
• Food labelling
• Logistics
• Deep-freeze applications
41
Application matrix for permanent adhesives
Adhesion
Contact time > 60s
> 60s
Room temperature
Adhesive
62Gpt
62Dps
62Xpc
62D
62A
63Z
63B
92C
Non-polar
•
•
•
•
•
•
•
•
• • •
• • •
• •
• • •
• • •
• • •
• • •
• • •
Examples of applications:
• Original closure (tamper-evident)
• Labels for chemical barrels
• Permanent labels
• Applications requiring high durability
• Applications in the electrical industry
42
Surface
Polar
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rough
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Smooth
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Application matrix for permanent adhesives
Wrap-around labelling
Polar
6 mm
Adhesive
62Gpt
62Dps
62Xpc
62D
62A
63Z
63B
92C
Non-polar
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
30 mm
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6 mm
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• • •
• • •
• ••
• • •
• •
• •
• • •
30 mm
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Examples of applications:
Wrap-around labelling (small radii)
Labelling over corners
Seal labels
For labelling over corners and seal labels, the longer the part that serves as a closure, the greater the
security of the label (see sketch). If this part is less than 6 mm long, security can become an issue.
43
HERMAsuperPerm (63S)
Adhesive HERMAsuperPerm (63S)
Specially developed for applications with extremely
high final adhesion (is achieved after 24 hours).
Applications
• Original seal
• Tamper-evident closure
• Long-term labelling
y
Extremel
• Outgasing plastics (e.g. beer crate)
• Critical nonpolar surfaces
(e.g. Bitumen, EPDM-hoses and packaging films)
Advantages
• Label will destruct upon attempted removal.
• Expensive special materials are not necessary.
• Extreme adhesion to polar and non-polar surfaces.
• Suitable for a wide variety of substrates.
• Versatility in applications.
• Very good processing properties.
• No adhesive bleed.
• Available in combination with papers and films.
• Good wrap-around properties
44
high final
!
adhesion
HERMAsuperPerm (63S)
Applications HERMAsuperPerm (63S)
Substrate
C las s i f icatio n
Folding boxes (e.g. drugs packaging)
+++
Bitumen (smooth)
++
Rubber products (smooth nonpolar – e.g. EPDM-hoses)
+++
Natural fibre (e.g. gunny sacks, carpet backing)
++
Synthetic fabric (e.g. polyester fabric)
+ +(+)
Synthetic fibre (e.g. glas fibre fabric)
+(+)
Polystyrene (e.g. thermo box)
+ +(+)
ABS (e.g. bumper, housing electrical industry)
+++
Cast metal
+++
PET (e.g. bottles, films, moulded parts)
+++
PO smooth (PP shaker, tool-box)
+++
PO structured (PE- / PP-canister)
++
Foam nonpolar (e.g. PP-form parts, bumper)
+ +(+)
Foam polar (e.g. car seats, rubber shoe sole)
+++
Impregnated fabric (e.g. tarpaulin, umbrella)
+ +(+)
Phenolic resin (e.g. boards)
+++
UV varnish “standard”
+ +(+)
Silicone varnish (high gloss, machine parts)
++
Dispersion varnish
+++
EP varnish (e.g. corrosion protection)
+++
Fruits (e.g. Avocado, melon, lemon)
++
Scale: + good adhesion, easy to remove
++ very good adhesion
+++ extremely high adhesion
45
HERMAperfectCut (65Tpc)
Adhesive HERMAperfectCut (65Tpc)
The problem solver for difficult applications.
Applications HERMAperfectCut (65Tpc)
Substrate
Classification
Tyres
+ +(+)
Rubber products smooth (e.g. EPDM-hoses /-seals)
++
Concrete (Cast; even cold)
+
Aluminium - diamond plate
++
Highly compressed cardboard (e.g. cores)
+++
Wood: dry, smooth (panels)
+++
Wood: dry, rough sawn
+(+)
Pallets of wood
+(+)
Pallets of plastic
++
Metal castings
+++
PO smooth (PP beaker, cover for canister)
+++
PO structured (rough PE-container)
++
Foam non-polar, open-cell (e.g. PE dishwashing sponge)
+(+)
Foam non-polar, closed-cell (PP-parts e.g. internal bumper material)
+ +(+)
Foam polar (Polyurethane e.g. car seat, shoe soles, polystyrene)
+++
Carpet backing (not for „small“ diameter)
++
Fruits like Melons
++
Scale:
46
+
++ +++ good adhesion, easy to remove
very good adhesion, label removable with effort
extremely high adhesion
Removable adhesives
Applications removable adhesives
Example
42Upp
42E
4 2N
LD-PE
Application
Packaging films
+++
++
+
HD-PE
Bottles for example cleaning agants
++++
++
++
PP
Cups for foodstuff, Children seats, helmets
++++
++
++
PET
Plastic bottles, films
-/+ +
++
++
Polyester 2
Powder coating
++
++
+
ABS
Bumper, housing electrical industry / housewares
-
++
+
EP
Corrosion protection, composite fibre components
+
+
+
MF (melamine)
Decorative paper, laminate, furniture
+++
++
+
Phenolic resin
Paper based laminate, PC boards
+++
+
+
PS (polystyrene)
Foodstuff packaging, switch
-/+ +
0
-
PMMA (polymethylmethacrylat)
Plastic glass, reflector, light conductor
-
++
++
Hard-PVC
Screen frames, profiles, water tubes
++
0
-
A4-Sheets
copy paper
+++
0/+
-
Newspaper
+++
-
-
Cardboard (slightly rough)
+++
++
++
Coated cardboard
+++
++
+
Packaging cardboard boxes
++++
+++
++
Float glass
+ + + *
++
+
Window glass
+ + + *
+
-/+
Aluminium
+++
+
+
Stainless steel
+++
0
-
Zinc
++
0
-
Copper
++
0
0
Chrome
++
0
0
Polyurethane (soft)
Imitation leather
++
0
0
Soft-PVC
Protective covers
-/+
-/+
-/0
Scale:
++++ very easy to remove – Adhesion can be to low under mechanical load
+++ very easy to remove
++ easy to remove
+ removable without residue
0
removable with residue
you can‘t remove without
destroying the label
* films as face material 42C
47
Permanent adhesives
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Permanent acrylic-based adhesives
Adhesive
reference
Description
Acrylate
Acrylic-based emulsion adhesive
62D
Adhesive 62D can be used universally.
It has a broad spectrum of use from price and computer
labelling to highgrade computer labels.
ISEGA-approval for
direct contact with
blood bags
It is also suitable for rough but not excessively curved surfaces.
This adhesive stands up well to ageing, heat and light.
ISEGA certification
for fatty foodstuffs
Correction factor 4
The adhesive layer can make direct contact with dry, wet and
fatty foods that have a correction factor of at least 4 according
to Annex III, Table 2 of EU Regulation 10/2011.
Tack
high
www.he
Final
adhesion
very high
Min. applicat.
temperature
Temperature
range
0 °C
– 30 °C to
+ 80 °C
(for short
periods up to
200 °C –
hot fusing)
0 °C
– 30 °C to
+ 80 °C
(for short
periods up to
200 °C –
hot fusing)
The adhesive 62Dpc is specially designed for A4 sheets, which
are used in laser printers and in copiers (in xerographic printing
processes).
62Dpc
ISEGA certification
for fatty foodstuffs
Correction factor 3
48
Thanks to the innovative multilayer (double-layer) technology
it was possible to increase the cohesion and thus significantly
reduce the adhesive bleed. An ideal feed through can be achieved as well as the impurities caused by adhesive bleed can be
avoided by the use of the 62Dpc. The 62Dpc has an excellent
resistance to ageing, heat and light.
All ingredients of adhesive 62Dpc comply with recommendations BfR XIV or FDA 21 CFR 175.105 (Adhesives). The adhesive
layer can make direct contact with dry, wet and fatty foods that
have a correction factor of at least 3 according to Annex III,
Table 2 of EU Regulation 10/2011.
high
very high
Permanent adhesives
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Permanent acrylic-based adhesives
Adhesive
reference
Description
Acrylate
Acrylic-based emulsion adhesive
www.he
Tack
Final
adhesion
Min. applicat.
temperature
Temperature
range
very high
very high
0 °C
- 30 °C to
+60 °C
Adhesive 62Dps is specially developed for thermal grades. It
shows good adhesion specially on packaging films, also at low
temperatures. Due to the very high initial tack 62Dps is particularly well suited for high-speed dispensing systems.
62Dps
ISEGA certification
for fatty foodstuffs
Correction factor 2
62Gpt
Because of its multi-layer construction 62Dps shows extremely
low tendency for migration and is suitable for direct contact
also with fatty foodstuff with limitation (correction factor).
62Dps is less suitable for curved surfaces. The adhesive has a
good ageing, heat and light resistance.
All ingredients of adhesive 62Dps comply with recommendations BfR XIV or FDA 21 CFR 175.105 (Adhesives). The adhesive
layer can make direct contact with dry, wet and fatty foods that
have a correction factor of at least 2 according to Annex III,
Table 2 of EU Regulation 10/2011.
In comparison to 62G the adhesive 62Gpt shows a further
improved tack on cold surfaces down to -10 °C. Due to the
high initial tack even on moist surfaces 62Gpt is particularly
suited for labelling polar and nonpolar surfaces such as plastic
containers, film wrappings and other packaging materials.
The 62Gpt suits especially well for fast running dispensers, in
which the initial tack has to be built up extremely quickly as f.ex.
when the labels are blown on the substrate. Once labelled the
adhesive is highly waterproof.
ISEGA certification
for fatty foodstuffs
Correction factor 2
very high
high
-10 °C
– 30 °C to
+ 80 °C
(for short
periods up to
200 °C –
hot fusing)
The adhesive layer can make direct contact with dry, wet and fatty
foods that have a correction factor of at least 2 according to Annex III, Table 2 of EU Regulation 10/2011.
49
Permanent adhesives
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Permanent acrylic-based adhesives
Adhesive
reference
Description
Acrylate
Acrylic-based emulsion adhesive
62K
ISEGA certification
for fatty foodstuffs
without limitation
62W
ISEGA certification
for fatty foodstuffs
Correction factor 2
62Xpc
ISEGA certification
for fatty foodstuffs
Correction factor 3
50
Adhesive 62K has been specially developed for deep-freeze
applications. Its instant adhesion is very good at normal
temperatures as well, even on critical surfaces such as PE and
PP films. 62 K can be re-emulsified in water or in the dishwasher
machine and can thus be removed easily from the surface to
which it is adhering.
Tack
high
www.he
Final
adhesion
medium
Min. applicat.
temperature
Temperature
range
-25 °C
– 60 °C to
+ 60 °C
(for short
periods up to
+ 200 °C)
-10 °C
-30 °C to
+80 °C
(for short
periods up to
+95 °C)
0 °C
-30 °C to
+80 °C
(for short
periods up to
+95 °C)
The adhesive layer may stand in direct contact with dry, moist
and fatty foodstuffs.
The PSA 62W is designed specifically for glass bottle labeling.
Excellent ice-bucket-resistance combined with a very high
adhesion even at low temperatures has also been implemented as the excellent processing for die-cutting-, printing- and
labeling-processes.
Thus with 62W sophisticated label formats can be realized and
can be applied at high speeds even at low temperatures. All
ingredients of adhesive 62W comply with recommendations BfR
XIV or FDA 21 CFR 175.105 (Adhesives).
high
very high
The adhesive layer can make direct contact with dry, wet and
fatty foods that have a correction factor of at least 2 according
to Annex III, Table 2 of EU Regulation 10/2011.
Adhesive 62Xpc has been produced in an innovative production
technique for synthetic face materials. Clearly better converting
properties can be reached through new developed middle layer
and the adhesion properties remain above average.
Once applied the adhesive is resistent to humidity, soaps and oil
and therefore suits specially well for product labelling in hygiene
and cosmetic industry. It features good resistance to light, heat
and aging.
The adhesive layer can make direct contact with dry, wet
and fatty foods that have a correction factor of at least 3 according
to Annex III, Table 2 of EU Regulation 10/2011.
high
high
Permanent adhesives
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Permanent acrylic-based adhesives
Adhesive
reference
Description
Acrylate
Acrylic-based emulsion adhesive
63Gpt
ISEGA certification
for fatty foodstuffs
Correction factor 4
63S
Adhesive 63Gpt shows excellent tack even on cold and moist
surfaces. Due to its high tack the adhesive is particularly suited
for labelling surfaces like milk bottles, plastic containers, film
wrappings and other packaging materials. Once labelled the
adhesive is highly waterproof.
All ingredients of adhesive 63Gpt comply with recommendations
BfR XIV or FDA 21 CFR 175.105 (Adhesives). The adhesive layer
can make direct contact with dry, wet and fatty foods that have a
correction factor of at least 4 according to Annex III, Table 2 of
EU Regulation 10/2011.
Adhesive 63S was specially developed to have extremely high
tack on various substrates. Because of the high final adhesion
63S is very suitable for long-term identification, for labelling of
difficult substrates and non-polar surfaces. This new kind of an
adhesive gives on various substrates like PE, PET, aluminium,
steel etc. similarly extreme high final adhesion values. Therefore
it is suitable with the right face material or security die cutting as
a tamper-evident-solution or as a seal for originality. Depending
on the substrate the final adhesion will be reached in some cases
in 24 hours. The tamper-evident-function is thus influenced by
the surface (in folded boxes from the applied varnish) and by
design of the substrate, by the design of the label and by the
conditions in the end use. 63S has a particularly good resistant
against light, heat and aging.
Tack
www.he
Final
adhesion
Min. applicat.
temperature
Temperature
range
– 30 °C to
+ 80 °C
(for short
periods up to
200 °C –
hot fusing)
very high
very high
-10 °C
very high
extremely
high
0 °C
-30 °C to
+80 °C
Because of the high tack and increased coat weight the matrix
stripping is recommended to do immediately at/ after die cutting.
63Z
ISEGA-approval for
direct contact with
blood bags
ISEGA certification
for fatty foodstuffs
Correction factor 5
Adhesive 63Z has a very broad spectrum of applications.
Because of its aggressive adhesive behaviour it is suitable
for a wide range of surfaces, particularly such critical ones as
cardboard packaging and for labelling ampoules.
It can also be used for chilled products on dry surfaces.
The adhesive layer can make direct contact with dry, wet and
fatty foods that have a correction factor of at least 5 according
to Annex III, Table 2 of EU Regulation 10/2011.
very high
extremely
high
0 °C
- 30 °C to
+70 °C
(for short
periods up to
200 °C –
hot fusing)
51
Permanent adhesives
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Permanent acrylic-based adhesives
Adhesive
reference
Description
Acrylate
Acrylic-based emulsion adhesive
65Tpc
SEGA-certification
for dry and moist,
non-fatty foodstuffs
The adhesive 65Tpc specially is developed for labelling tyres.
Thanks to its extremely high tack adhesive 65Tpc is particularly suitable for labelling rubber products, rough PE-containers,
wood-based materials and very rough cardboard. In spite of its
high coat weight this newly designed adhesive offers excellent
die-cutting characteristics. Adhesive 65Tpc is particularly resistant to light, heat and ageing. Very good die-cutting characteristics on all usual machines.
www.he
Tack
Final
adhesion
Min. applicat.
temperature
Temperature
range
extremely
high
extremely
high
-10 °C
-40 °C to
+60 °C
Final
adhesion
Min. applicat.
temperature
Temperature
range
The adhesive layer may stand in direct contact with dry andmoist, non-fatty food stuffs. (ISEGA Certificate of Clearance).
Permanent UV-cured acrylic adhesive
Adhesive
reference
Description
UVA
UV-cured acrylic adhesive
62A
ISEGA-approval for
direct contact with
blood bags
ISEGA certification
for fatty foodstuffs
Correction factor 3
Tack
Adhesive 62A is a permanent adhesive for general use with
very good adhesive qualities on a very wide variety of surfaces.
Its adhesion to both polarised and unpolarised (PE) surfaces is
very good.
Its distinguishing features are, very good water resistance and
the way it stands up particularly well to light, heat and ageing.
The adhesive layer can make direct contact with dry, wet and
fatty foods that have a correction factor of at least 3 according
to Annex III, Table 2 of EU Regulation 10/2011.
high
very high
5 °C
– 30 °C to
+ 120 °C
(for short
periods up to
200 °C –
hot fusing)
high
high
0 °C
– 30 °C to
+ 90 °C
Adhesive 63A has been developed in conjunction with HERMAsilk
specifically for adhesion to textiles.
63A
52
Its adhesion is very good but it can still be removed from most
textiles after a short time without leaving any residues. 63A
stands up particularly well to ageing, heat and light.
Permanent adhesives
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Permanent UV-cured acrylic adhesive
Adhesive
reference
Description
UVA
UV-cured acrylic adhesive
62B
Adhesive 62B is an adhesive for general use with above
average adhesive qualities. It demonstrates excellent instant
adhesion and very good adherence to both polarised and
unpolarised (PE) surfaces.
ISEGA-approval for
direct contact with
blood bags
It stands up particularly well to light, heat and ageing. In combination with HERMA PE (850, 851, 860, 861, 870, 871), Adhesive
62B meets the requirements of BS 5609 Section II (resistance
to sea water).
ISEGA certification
for fatty foodstuffs
Correction factor 3
63B
ISEGA-approval for
direct contact with
blood bags
ISEGA certification
for fatty foodstuffs
Correction factor 3
Tack
high
www.he
Final
adhesion
very high
Min. applicat.
temperature
Temperature
range
0 °C
– 40 °C to
+ 150 °C
(for short
periods up to
200 °C –
hot fusing)
The adhesive layer can make direct contact with dry, wet and
fatty foods that have a correction factor of at least 3 according to
Annex III, Table 2 of EU Regulation 10/2011.
The adhesion behaviour of adhesive 63B is aggressive, which
makes it particularly suitable for critical surfaces such as raw
cardboard, and for labelling ampoules.
In combination with PETP it is outstandingly suitable for use at
high temperatures. 63B stands up particularly well to light, heat
and ageing and likewise in combination with HERM PETP films
(895, 990, 991, 992), itmeets the requirements of UL approval
and of BS 5609 Section II (resistance to sea water).
very high
extremely
high
0 °C
*depending on
label material
The adhesive layer can make direct contact with dry, wet and
fatty foods that have a correction factor of at least 3 according to
Annex III, Table 2 of EU Regulation 10/2011.
Because of its high level of adhesion, adhesive 64B is
particularly suitable for labelling steeply arched, rough, dusty
and oily surfaces and for labelling rubber products and drums
for chemicals.
64B/65B
In combination with HERMA PE Laser, 64B is suitable for labelling
chemical drums on a hot filling line where the temperature of the
drum can go up to 180°C. 64B stands up particularly well to light,
heat and ageing.
– 40 °C to
+ 150 °C*
(for short
periods up to
200 °C –
hot fusing)
extremely
high
extremely
high
0 °C
– 40 °C to
+ 80 °C*
(for short
periods up to
200 °C –
hot fusing)
In combination with HERMA PE Laser (800), adhesive 64B meets
the requirements of BS 5609 Section II (resistance to sea
water).
53
Permanent adhesives
r
bout ou pt?
know a
G
Do you ernative 62
elt alt e 32)
hot-m
(pag
Rubber based adhesive
Adhesive
reference
Description
Hotmelt
Rubber based adhesive
Tack
Final
adhesion
Min. applicat.
temperature
Temperature
range
92C
Adhesive 92C demonstrates excellent adhesion on many
surfaces. Its aggressive adhesion behaviour ensures that
labels adhere very well to polarised, unpolarised, slightly
rough and arched surfaces. Performs very well on chilled
products and on cold and damp surfaces.
very high
very high
to 0 °C
– 25 °C to
+ 50 °C
92K
Adhesive 92 K is used specifically for applications relating to
deep-frozen products. Its initial adhesion is excellent even on
surfaces covered with moisture. Its initial and final adhesion on
unpolarised surfaces such as PE and PP films is very good.
very high
high
to – 20 °C
– 40 °C to
+ 40 °C
54
Permanent adhesives
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Removable acrylic based adhesive
Adhesive
reference
Description
Acrylate
Acrylic-based adhesive
42N
ISEGA certification
for fatty foodstuffs
without limitation
42E
ISEGA certification
for fatty foodstuffs
Correction factor 3
42Upp
www.he
Tack
Final
adhesion
Min. applicat.
temperature
Temperature
range
– 25 °C
– 40 °C to
+ 60 °C
(for short
periods up to
200 °C –
hot fusing)
–20 °C
– 20 °C to
+ 60 °C
(up to 200 °C
for short
periods - hot
fusing)
0 °C
– 20 °C to
+ 50 °C
(for short
periods up to
200 °C –
hot fusing)
Adhesive 42N is used wherever a label has to have good removability even after good initial tack. It is especially suitable for
cardboard boxes, PE films, and glass.
Its removability may be limited, however, on certain surfacetreated materials. 42N stands up well to light, heat and ageing.
The adhesive layer may stand in direct contact with dry, moist and
fatty foodstuffs.
medium
low
Adhesive 42E shows good tack and adhesion in combination
with soft and clean removability from a wide variety of substrates. Especially on plastic surfaces like PP, PET, ABS 42E can be
removed easily.
42E is also suitable for different cardboards and non-coated
glass. The adhesive allows label application at a wide temperature range and it retains its removable properties even at low
temperatures. 42E features excellent resistance to light, heat
and ageing.
Adhesive 42Upp is a microsphere based adhesive. Suitable for
applications requiring medium tack combined with excellent
removability. It is particularly suited for labelling smooth objects like books, glass or metals. However, adhesion of 42Upp
is suboptimal on rough or extremely curved surfaces. Adhesive
42Upp is unplasticized and features good resistance to light,
temperature and ageing.
Face material, shape of the label, service conditions and contact
time may have an impact on removability profile. Tests of the
printed label under actual application conditions are strongly
recommended.
medium
medium
very low
low
(removable)
55
Semi-permanent adhesives
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Semi-permanent UVA-adhesives
Adhesive
reference
Description
UVA
UV-cured acrylic adhesive
52A
Adhesive 52A can be initially repositioned on most surfaces
but is permanent on others, particularly on cardboard. 52A’s
distinguishing feature is its very good resistance to water,
and it also stands up particularly well to light, heat and ageing.
ISEGA certification
for fatty foodstuffs
without limitation
52N
Tack
medium
Final
adhesion
medium
Min. applicat.
temperature
Temperature
range
0 °C
– 30 °C to
+ 80 °C
(for short
periods up to
200 °C –
hot-fusing)
– 25 °C
– 40 °C to
+ 60 °C
(for short
periods up to
200 °C –
hot-fusing)
The adhesive layer may stand in direct contact with dry, moist and
fatty foodstuffs. (ISEGA Certificate of Clearance).
Adhesive 52N is suitable for applications requiring high tack
combined with good removabil-ity. It is particularly suited for
labelling cardboard, rough surfaces and plastic films.
Removability may be impaired if applied on certain surface
coated materials. Adhesive 52N features excellent resistance to
light, heat and ageing.
Excellent die-cutting characteristics on all customary
machines.
56
www.he
medium
to high
low to
medium
Removable adhesives / Permanent adhesives
Examples:
The Universal One: Adhesive 62D, 62Dpc und 62Dps
The Filmstar: Adhesive 62Xpc
 Computer labels
 Film labels for cosmetics- or personal hygiene industry
 Industrial labels
 Universal applicable on various surfaces
 Rough, slightly curved surfaces
The Unrelenting One: Adhesive 63Z
The Cool One: Adhesive 62Gpt
 Critical surfaces like cardboard or phials
 Packaging materials
 Aggressive adhesion properties
 Humid and cool surfaces up to -10°C
 Cold-storage applications on dry surfaces
 Once labelled it is highly waterproof
 Suitable for blow on labelling
The Removable One: Adhesive 42R and 42N
 Cardboard packaging (logistics)
The Frosty One: Adhesive 62K
 PE film
 Deep frozen products
 Steel
 Excellent tack at room temperature even on
 Curved surfaces
critical surfaces as PE and PP
 Over-edge labelling
• Easily removable at room temperature
 Rough surfaces
57
Removable adhesives / Permanent adhesives
Easily removable and ultra-removable: 42E und 42Upp
The Allrounder: Adhesive 62A
• Glass
 Permanent all-purpose adhesive
• Paper (mail/logistics)
 For reels from 1m-useable-width
• Polymer surfaces (PP, hard PVC)
 Partial gummin
• Metals (painted, galvanized, powder-coated)
• Extremely smooth surfaces (books, coated surfaces)
• Glass (peels off easily)
The Ambitious One: Adhesive 63B
 Type plates
 Chemical sector combined with PET-films
 Particularly suitable for critical surfaces
The Established Cool One: Adhesive 92C
• even for labelling cold and humid ones
 Packaging materials
 Exceptional strength in labelling films
and plastics
 Very good tack on humid surfaces
The Arctic One: Adhesive 92K
 Deep-frozen products
 Excellent initial tack even on damp surfaces
 Extreme demands on tack, e. g. high-speed
labelling of perforated filmic bags for bakery goods
The Drastic One: Adhesive 64B, 65B und 65Tpc
 Tyre labelling
 Chemical sector with HERMA PE laser – filling of
chemical barrels at a maximum temperature of 180°C
 For extremely challenging demands of the surface
 Remaining good die-cuttability
The Superpermanent 63S
• Original seal
• Tamper-evident closure
• Long-term labelling
• Tax label
• Seal label
58
Release liner
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Release liner
www.he
Mat. no.
Weight
g/qm
HERMA PH
515
61
Honey, supercalendered glassine paper
HERMA PW
517
65
White, supercalendered glassine paper
HERMA PW
520
59
White, supercalendered glassine paper
HERMA PH
523
59
Honey, supercalendered glassine paper
HERMA PW
525
72
White, supercalendered glassine paper
HERMA PW
915
50
White, supercalendered glassine paper
HERMA KW
510
97
White, kraft paper, coated on one side
HERMA KW
511
120
White, kraft paper, coated on one side
HERMA KW
512
56
White, kraft paper, coated on one side
HERMA KW
527
75
White, kraft paper, coated on one side
Mat. no.
Thickness
in µm
HERMA PETP C
815
30
Transparent, biaxially stretched polyester film
HERMA PET
565
30
Transparent, biaxially stretched polyester film
HERMA PET
560
23
Transparent, biaxially stretched polyester film
Brief description
Glassine papers
Kraft papers
Brief description
Films
59
Net Width Programme / Pre Slit Range
Net Width Programme / Pre Slit Range
Net Width Programme
Secure the advantages of HERMA Net width programme and order
your self-adhesive materials without any off-cut reel, in any width
you need. Quickly, economically and easily.
Visit our website for the new net width programme
www.herma-material.com
http://www.herma-material.de/en/
service/net-width-service.html
Pre Slit Range
A large selection of Pre-Slit Rolls are available, ready cut to your
specified dimensions and can be supplied to you in shortest time.
Visit our website for the new pre slit range
www.herma-material.com
http://www.herma-material.de/en/
service/pre-slit-range.html
Storage Conditions for HERMA self-adhesive materials
HERMA self-adhesive materials are ideally stored in original packaging
in dark and dry place in a temperature of 20 plus or minus 5 degrees
and in a relative humidity of 45 plus or minus 5 %.
If the storage conditions and the conditions at the place of converting
are different, the material should have enough time for acclimatisation. Otherwise this might lead to converting problems. Generally the
material should unpacked just before converting.
60
Synthetic self-adhesive materials should not be stored under direct
sunlight or heat, as otherwise this might lead to brittleness of the film.
HERMA self-adhesive materials should be converted systematically
based on the principle “first-in-first-out”.
Certificates
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Certificates
www.he
HERMA approvals according to BfR and FDA
In the food and pharmaceutical industry a large number of widely
differing labels are used. The labels are either affixed to the food
packing (indirect food contact) or directly on the food itself, e.g. meat,
cheese, fruit (direct food contact). Likewise there is direct application
on pharmaceutical products (primary label) and sales packing
(secondary label).
To reduce the risk of toxic constituents of the adhesive or of the label
from migrating into the food or pharmaceutical product, the adhesive,
the label material and backing paper are checked for conformity with
the requirements of the BfR (German federal institute for risk assessment) and of the FDA (US Food and Drug Administration).
HERMA has a large number of widely differing self-adhesive materials
for you that meet the requirements of the BfR and the FDA and are
suitable for the labelling of food and for pharmaceutical products.
To check HERMA adhesive, a special label material, a specific foil or a
release liner has the approval according to BfR and FDA please look
for the appropriate data sheet. You will find them on our website
www.herma.com or please contact your personal sales representative
or phone +49(0)711/7702-0.
HERMA self-adhesive materials according to BS-5609 certificate, section 2 (resistance to sea water)
For most of the products used in the chemical industry approval
according to British Standard 5609 Section 2 is required. Compliance with this requirement means that the affixed and unprinted
label can be stored for 3 months in seawater without the risk of
becoming detached. This allows labelled containers to be transported
by sea without any problems. With the UV-acrylic based adhesive
from HERMA in combination with suitable label material, you can
meet this challenge. The following combinations of materials meet
the BS-5609 certificate.
Label material
Adhesive
Label material
Adhesive
HERMA PE Laser (800)
64B
HERMA PETP transparent matt (997)
63B
HERMA PE Paperprint (812)
63B
HERMA PETP white matt Laser (998)
62Z
HERMA PE white (850)
62B
HERMA PP Paperprint (813)
63B
HERMA PE white tc (851)
62B
HERMA PP white extra tc (880)
62Xpc
HERMA PE transparent (860)
62B
HERMA PP white extra tc (880)
65Tpc
HERMA PE transparent tc (861)
62B
HERMA PO Laser (801)
64Z
HERMA PE white matt (870)
62B
HERMA PO Laser (801)
64B
HERMA PETP white gloss (895)
63B
HERMAprintex (931)
63B
HERMA PETP silver SR (995)
63B
HERMA PETP white matt (996)
63B
It is the responsibility of the label printers to ensure that the
printed labels conform to the requirements of the standard BS 5609,
Section 3, on rating the performance of the printed label.
61
Approvals and certificates
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Approvals and certificates
www.he
HERMA self-adhesive materials with UL approval
UL (Underwriters Laboratories Inc.) is an independent American
test institute that checks products for conformity with the applicable
consumer safety standards.
One of the most important criteria for supplying the automotive
industry is approval for the adhesive material by UL. The following
combinations of materials meet the standard UL 969.
Label material
Adhesive
Release liner
HERMA PETP white bright (895)
63B
(517)
HERMA PETP silver SR (995)
63B
(517)
HERMA PETP white matt (996)
63B
(517)
HERMA PETP transparent matt (997)
63B
(517)
HERMAprintex (931)
63B
(523)
You can look for and print out all HERMA UL certificates at
www.ul.com.
62
Please click on Certifications and then enter the name “HERMA” in
Company Name / Location.
Approvals and certificates
le at:
availabl.com
s
t
e
e
h
datas rma-materia
Approvals and certificates
www.he
HERMA adhesives according to ISEGA Certificate of Clearance
ISEGA has been operating successfully for almost 40 years as a
free and independent advisory and inspection institute for commerce
and industry in the fields of chemical and physical analysis, microbiology, ecology, sterilisation, production assessment and product
certification.
It is accredited as a laboratory according to ISO 17025 by the (DACH)
“German accreditation institute for the chemical industry” and by
the (ZLG) “Central office of the German States for health protection in
medical products”).
With all HERMA adhesives listed below the adhesive layer is
allowed to come into direct contact with dry, moist and non-fatty
foodstuff (ISEGA certificate).
ISEGA certification for direct contact with foodstuffs with fatty surfaces*
HERMA adhesive
Properties
Applications
62Gpt
Permanent acrylate-based dispersion adhesive
For cool and moist surfaces
62Dps
Permanent acrylate-based dispersion adhesive
General-purpose adhesive
62Dpc
Permanent acrylate-based dispersion adhesive
For copiers or laser printers
62D
Permanent acrylate-based dispersion adhesive
General-purpose adhesive
62Xpc
Permanent acrylate-based dispersion adhesive
For film labels
42N
Removable acrylate-based dispersion adhesive
Repositionable
62W
Permanent acrylate-based dispersion adhesive
For labelling wines and spirits
63Z
Permanent acrylate-based dispersion adhesive
For pharmaceutical products
62K
Permanent acrylate-based dispersion adhesive
For deep-frozen surfaces
63B / 62A / 62B
Permanent UV-cured acrylate hot-melt adhesive
For the chemical industry, automotive
industry and critical surfaces
52A
Semi-permanent, acrylate-based UV-cured hotmelt adhesive
Repositionable
*Allowing for the specified reduction factors.
Last updated January 2015.
Further information is
available at:
www.bfr.bund.de
www.fda.gov/default.htm
www.isega.de
63
HERMA Self-adhesive Material
Get to know us!
For over 100 years, you have been able to count on top “Made in Germany” quality from HERMA. And Germany
is our choice for the future too. In Filderstadt near Stuttgart, we produce self-adhesive material in one of the
most modern plants in the world.
Worldwide, HERMA ranks among the pioneers in this field. Thanks to a
whole new kind of multi-layer coating technology, today we already have
the capability of simultaneously coating different layers of adhesive. With
this method, we produce a broad spectrum of adhesive paper and film
products from which our customers all over Europe manufacture labels
for all kinds of applications.
Virtually all processes right through to shipment of the finished rolls of
adhesive material are fully automated – one further guarantee for our
customers of top product quality and uninterrupted availability. We inspect, test and develop in our
own laboratory. And our customers appreciate the personal service they get in their daily work.
We are not solely concerned with strategic goals,
but also with the values which guide each and
every one of our employees in their routine
work and at the same time make up
HERMA‘s corporate culture.
HERMA GmbH
Self-adhesive Material Division
Fabrikstrasse 16
D-70794 Filderstadt / Germany
www.herma-material.com