13008
www.vishay.com
Vishay Sprague
Solid Tantalum Chip Capacitors Tantamount®,
Conformal Coated Case, Ultra Low ESR, DLA Approved
FEATURES
• High reliability
• Surge current testing per MIL-PRF-55365 options
• Ultra low ESR
• Tin/lead (SnPb) termination
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 4 VDC to 63 VDC
Capacitance Range: 10 μF to 1500 μF
ORDERING INFORMATION
13008
-001
K
E
S
A
/HR
DRAWING
NUMBER
DASH
NUMBER
CAPACITANCE
TOLERANCE
TERMINATION
RELIABILITY
LEVEL
SURGE CURRENT
PACKAGING
K = ± 10 %
M = ± 20 %
E = Solder plated
(Sn/Pb solder)
S = Voltage aging
A = 10 cycles
at + 25 °C
B = 10 cycles
at - 55 °C/+ 85 °C
(after voltage aging)
C = 10 cycles
at - 55 °C/ + 85 °C
(before voltage aging)
Z = No surge
Blank = Full 7" reel
/HR = Half 7" reel
DIMENSIONS in inches [millimeters]
J
Tantalum wire nib identifies
anode (+) terminal
W
D L
H
B
A
CASE CODE
V
D
E
R
F
Z
M
H
N
L (MAX.)
0.299
[7.6]
0.299
[7.6]
0.299
[7.6]
0.299
[7.6]
0.299
[7.6]
0.299
[7.6]
0.315
[8.0]
0.315
[8.0]
0.315
[8.0]
W
0.173 ± 0.016
[4.4 ± 0.4]
0.173 ± 0.016
[4.4 ± 0.4]
0.173 ± 0.016
[4.4 ± 0.4]
0.238 ± 0.016
[6.0 ± 0.4]
0.238 ± 0.016
[6.0 ± 0.4]
0.238 ± 0.016
[6.0 ± 0.4]
0.260 + 0.016/- 0.024
[6.6 + 0.4/- 0.6]
0.260 + 0.016/- 0.024
[6.6 + 0.4/- 0.6]
0.260 + 0.016/- 0.024
[6.6 + 0.4/- 0.6]
H
0.079
[2.0 max.]
0.138
[3.5 max.]
0.157 ± 0.016
[4.0 ± 0.4]
0.142 ± 0.016
[3.6 ± 0.4]
0.185 ± 0.016
[4.7 ± 0.4]
0.236 ± 0.016
[6.0 ± 0.4]
0.142 ± 0.016
[3.6 ± 0.4]
0.205 ± 0.016
[5.2 ± 0.4]
0.252 ± 0.016
[6.4 ± 0.4]
A
0.051 ± 0.012
[1.3 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
0.051 ± 0.012
[1.3 ± 0.3]
0.055 ± 0.016
[1.4 ± 0.4]
0.055 ± 0.016
[1.4 ± 0.4]
0.051 ± 0.012
[1.3 ± 0.3]
0.055 ± 0.016
[1.4 ± 0.4]
0.056 ± 0.017
[1.4 ± 0.4]
B
0.181 ± 0.024
[4.6 ± 0.6]
0.181 ± 0.024
[4.6 ± 0.6]
0.181 ± 0.024
[4.6 ± 0.6]
0.181 ± 0.024
[4.6 ± 0.6]
0.181 ± 0.024
[4.6 ± 0.6]
0.181 ± 0.024
[4.6 ± 0.6]
0.197 ± 0.024
[5.0 ± 0.6]
0.197 ± 0.024
[5.0 ± 0.6]
0.196 ± 0.025
[5.0 ± 0.6]
D (REF.)
0.252
[6.4]
0.252
[6.4]
0.252
[6.4]
0.244
[6.2]
0.244
[6.2]
0.244
[6.2]
0.260
[6.6]
0.260
[6.6]
0.259
[6.6]
J (MAX.)
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
Note
• The anode termination (D less B) will be a minimum of 0.012" [0.3 mm]
Revision: 04-Apr-13
Document Number: 40164
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
13008
www.vishay.com
Vishay Sprague
RATINGS AND CASE CODES
μF
10
15
22
33
47
68
100
150
220
330
470
680
1000
1500
4V
6.3 V
V
E
E
R
V
E
E/R
R
10 V
E
E
R
F
16 V
20 V
E
F
H
25 V
35 V
E/R
R
F
Z/N
R
F
F
R
F
F
M
R
F/H
50 V
63 V
D
R
F
STANDARD RATINGS
MAX. DCL (μA) AT
CAPACITANCE
(μF)
CASE CODE
470
680
1000
1000
1500
V
E
E
R
R
330
470
680
1000
V
E
E
R
330
470
680
1000
E
E
R
F
220
330
470
E
F
H
220
330
330
R
F
H
68
100
150
220
R
F
F
M
47
68
100
R
F
F
PART NUMBER
+ 25 °C
+ 85 °C
+ 125 °C
4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C
13008-001(1)ES(2)/(3)
18.8
188.0
225.6
13008-002(1)ES(2)/(3)
27.2
272.0
326.4
13008-003(1)ES(2)/(3)
40.0
400.0
480.0
13008-004(1)ES(2)/(3)
40.0
400.0
480.0
13008-005(1)ES(2)/(3)
60.0
600.0
720.0
6.3 VDC AT + 85 °C; 4 VDC AT + 125 °C
13008-010(1)ES(2)/(3)
20.8
208.0
249.6
13008-011(1)ES(2)/(3)
29.6
296.0
355.2
13008-012(1)ES(2)/(3)
42.8
428.0
513.6
13008-013(1)ES(2)/(3)
63.0
630.0
756.0
10 VDC AT + 85 °C; 7 VDC AT + 125 °C
13008-020(1)ES(2)/(3)
33.0
330.0
396.0
13008-021(1)ES(2)/(3)
47.0
470.0
564.0
13008-022(1)ES(2)/(3)
68.0
680.0
816.0
13008-023(1)ES(2)/(3)
100.0
10 000
12 000
16 VDC AT + 85 °C; 10 VDC AT + 125 °C
13008-030(1)ES(2)/(3)
35.2
352.0
422.4
13008-031(1)ES(2)/(3)
52.8
528.0
633.6
13008-032(1)ES(2)/(3)
75.2
752.0
902.4
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
13008-040(1)ES(2)/(3)
44.0
440.0
528.0
13008-041(1)ES(2)/(3)
66.0
660.0
792.0
13008-042(1)ES(2)/(3)
66.0
660.0
792.0
25 VDC AT + 85 °C; 17 VDC AT + 125 °C
13008-050-(1)ES(2)/(3)
17.0
170.0
204.0
13008-051-(1)ES(2)/(3)
25.0
250.0
300.0
13008-052-(1)ES(2)/(3)
37.5
375.0
450.0
13008-053-(1)ES(2)/(3)
55.0
550.0
660.0
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
13008-060(1)ES(2)/(3)
16.5
165.0
198.0
13008-061(1)ES(2)/(3)
23.8
238.0
285.6
13008-062MES(2)/(3)
35.0
350.0
420.0
MAX. DF (%) AT
MAX. ESR
AT + 25 °C
100 kHz
()
+ 25 °C
+ 85 °C
+ 125 °C
- 55 °C
8
6
8
8
8
10
8
10
10
10
12
10
12
12
12
60
25
20
18
24
8
6
6
8
10
8
8
10
12
10
10
12
56
30
25
31
6
6
6
20
8
8
8
24
10
10
10
30
35
28
28
120
8
10
14
10
12
17
12
15
21
60
100
100
8
10
10
10
12
12
12
15
15
80
100
100
6
8
8
8
8
10
10
10
10
12
12
12
100
100
80
100
6
6
8
8
8
10
10
10
12
100
100
100
Note
• Part number definitions:
(1) Capacitance tolerance: K, M
(2) Surge current: A, B, C, Z
(3) Packaging: Blank, /HR
Revision: 04-Apr-13
Document Number: 40164
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
13008
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL (μA) AT
CAPACITANCE
(μF)
CASE CODE
15
15
22
33
47
47
E
R
R
F
Z
N
10
15
22
D
R
F
PART NUMBER
+ 25 °C
+ 85 °C
MAX. DF (%) AT
+ 125 °C
MAX. ESR
AT + 25 °C
100 kHz
()
+ 25 °C
+ 85 °C
+ 125 °C
- 55 °C
6
6
6
6
6
6
8
8
8
8
8
8
10
10
10
10
10
10
350
250
220
150
240
150
6
6
6
8
8
8
10
10
10
400
400
250
50 VDC AT + 85 °C; 33 VDC AT + 125 °C
13008-070(1)ES(2)/(3)
7.5
75.0
90.0
13008-071(1)ES(2)/(3)
7.5
75.0
90.0
13008-072(1)ES(2)/(3)
11.0
110.0
132.0
13008-073(1)ES(2)/(3)
16.5
165.0
198.0
13008-074(1)ES(2)/(3)
23.5
235.0
282.0
13008-075(1)ES(2)/(3)
23.5
235.0
282.0
63 VDC AT + 85 °C; 42 VDC AT + 125 °C
13008-080(1)ES(2)/(3)
10.0
100.0
120.0
13008-081(1)ES(2)/(3)
9.5
95.0
114.0
13008-082(1)ES(2)/(3)
13.9
139.0
166.8
Note
• Part number definitions:
(1) Capacitance tolerance: K, M
(2) Surge current: A, B, C, Z
(3) Packaging: Blank, /HR
POWER DISSIPATION
CASE CODE
V
D
E
R, F, M
Z
H
N
MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR
0.141
0.215
0.240
0.250
0.265
0.265
0.280
STANDARD PACKAGING QUANTITY
CASE CODE
V
D
E
R
F
Z
M
H
N
PRODUCT INFORMATION
Conformal Coated Guide
Pad Dimensions
Packaging Dimensions
Moisture Sensitivity
SELECTOR GUIDES
Solid Tantalum Selector Guide
FAQ
Frequently Asked Questions
Revision: 04-Apr-13
UNITS PER REEL
7" FULL REEL
1000
400
500
300
250
250
200
200
200
7" HALF REEL
500
200
250
150
125
125
100
100
100
www.vishay.com/doc?40150
www.vishay.com/doc?40135
www.vishay.com/doc?49053
www.vishay.com/doc?40110
Document Number: 40164
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000