B attery Package BS17A-H24/2.0L
3.5-inch Bay Fixed Type Ni-MH Battery
Lead
Ni-Cd
Ni-MH
Other
RoHS
Directive
Battery backup discharge characteristics
Time (minute)
Be aware that it is a reference value at initial use of
the battery package; it is not a guaranteed value.
BS17A-H24/2.0L
Model
20
40
60
80
100
Load (W)
Stock
Standard stock
■Model Name Coding
1. Series name
2. Modification code
3. Ni-MH battery
BS17 A - H 24 / 2.0 L
③ ④
10
0
Description
②
20
Inside view
BP17A-H24/2.0L
①
30
⑤
4. Output voltage (24 VDC)
5. Capacity
6. Long life expectancy battery
⑥
Battery Charge/Discharge Characteristics (used with PCFL-180P-X2S2)
Compatible Power Supply
(Examples of actual measurement)
Be aware that it is a reference value at initial use of the battery package; it is not a guaranteed value.
It can be customized to correspond to TTL signal. Consult with us.
Model: BS17A-H24/2.0L-T
Note: This battery package is for standby use. If it is used for cycle use,
its life span may be shortened. Consult with us if you wish to use it for cycle use.
Batt_low
Charge current
15
8
12
5
9
2
-1 0
3
6
9
12
15 6
-4
3
-7
-10
Charge current (A)
● Ni-MH battery package for fanless power supplies
(PCFL-180P-X2S2 and PCFD-180P-X2S).
● Small-scale size that can be fixed to 3.5-inch bay
● With various input/output signals (RS232C signal),
BATT OPERATE (AC FAIL), BATT LOW, and SHUT DOWN,
it deals with automatic shutdown at blackout.
Discharge current
Discharge current (A)
Features
Discharge voltage
11
0.2
0
0
In order to compensate for the loss of the
battery caused by self-discharge after
full charge, the battery is charged in a
trickle charging mode with pulse current.
0.1
0
3
Discharge time (minute)
Discharge Characteristics (90W)
Discharge voltage
Discharge current
9
12
15
Charge Characteristics (90W)
Batt_low
Charge current
20
15
10
15
5
10
0
6
Charge time (hour)
0
2
4
6
-5
8
5
0
-10
Charge current (A)
p.367
Charge Characteristics (50W)
Discharge current (A)
PCFD-180P-X2S
Discharge Characteristics (50W)
Discharge voltage (V) / Batt_low (V)*
p.359
Discharge voltage (V) / Batt_low (V)*
Battery Package & Options
PCFL-180P-X2S2
0.2
In order to compensate for the loss of the
battery caused by self-discharge after
full charged, the battery is charged in a
trickle charging mode with pulse current.
0.1
0
0
3
Discharge time (minute)
6
9
12
15
Charge time (hour)
* Battery low voltage signal for RS232C(BATT LOW_R)
General Specification Condition: at normal temperature and humidity unless otherwise specified
Items
Specification
Measurement condition, etc.
Battery
12V 1.8Ah × 8 connected in serial
Sealed Ni-MH battery
Nominal Battery Voltage
9.6 VDC
Rated Capacity
1.8Ah
Rated Output Capacity
Charge Specification
97.2W (18V 5.4A)
Embedded Fuse Rating
30A 32V
0.2A typ. (15 hours max. typ.)
Do not replace fuse.
Embedded Boosting Circuit Voltage 18V typ.
Output terminal voltage of the battery package
Discharge Cut-Off Voltage
6.4V to 7.2V
To prevent over-discharge of the battery, battery discharge
is forcibly shut down with battery voltage monitoring circuit.
Operating Temp. / Humidity
0 to 45°C / 10 to 90%
Derate the power to 80% of the rated output at 0°C
(100% of the rated output can be gained at or above 10°C).
Storage Temp. / Humidity
1 year or less: less then -20 to 30°C / 10 to 95%, 3 months or less: -20 to 40°C / 10 to 90%
1 month or less: -20 to 50°C / 10 to 95%
No condensation
Weight
900g typ.
Life Expectancy*
Approx. 3 to 4 yrs. (5 time/day discharge)
Environmental temp. 30°C, 50W 3-minute discharge at a time.
Warranty
1 year after delivery. If any faults belong to us, the defective unit shall be repaired
or replaced at our cost except for malfunction caused by over-discharge.
Except for errors caused by operation not listed in the
specification.
*Life expectancy is a reference value. It is not a guaranteed value.
411
Battery package
Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright
2013 Nipron Co., Ltd.
Signal Input / Output Specification Condition: at normal temperature and humidity unless otherwise specifieds Sold separately
SHUT DOWN_R
Specification
At 'positive input voltage', battery connection is shutdown (60ms min.) (only available at backup operation).
Range of ‘positive input voltage’: +3V to + 25V
BATT OPERATE_R
(AC FAIL)
At battery backup operation, 'negative voltage' signal is delivered. Range of ‘negative output voltage’: -5V to -15V
(detection delay time: 5ms min. after battery backup, only available at battery backup operation).
BATT LOW_R
When the battery terminal voltage decreases to 7.2V to 8.0V, 'negative voltage' signal is delivered (only available at
AC operation or battery backup operation). Range of ‘negative output voltage’: -5V to -15V
Item
Input
Output
Block Diagram
Power supply
CN11, CN12 are not
drawn in the diagram
CN1
Input
L
N
FG
BATT +
Battery package
20-pin main harness
[WH-M2022-500-01]
CN10
+3.3V
+5V
+12V
-12V
GND
+5VSB
PWR_OK
PS_ON#
+3.3V
+5V
+12V
-12V
GND
+5VSB
PWR_OK
PS_ON#
BATT CN13
Charger
CN4-1
Fuse
Thermal
guard
Discharge
cut-off
CN7
Battery connection harness (power harness)
[WH-02VH02VH-250]
BATT + 1
Boost up circuit
BATT - 2
CN5
1
Switching circuit at blackout
Sequence circuit
-12V circuit
Control circuit
2
CN101
+5V 1
-12V 2
Themistor
CN4-2
CN100
BATT LOW 1
GND 4
Outline Drawing
Chassis
Cover
CN7
CN7
Model: B2PS-VH (JST)
CN100
Post: Tinning with brass/copper underlayer
Sealing
sticker
CN101
Pin Input / output Mating connector
Batt -
Housing VHR-2
(JST)
101.5± 0.0
0.3
Batt +
2
LED
94
Material Base: Nylon66 UV94V-0
1
(37.5)
3.5-inch bay fixed type
Battery Package & Options
SHUTDOWN 2
BATT OPERATE (AC FAIL) 3
CN100
Model: S4B-PH-SM4-TB (JST)
Material Base: Nylon66 UL94V-0
Post: Tinning with copper alloy/brass underlayer
1
Batt LOW
2
SHUTDOWN
3
Batt operate
(AC_FAIL)
4
GND
(37.5)
Pin Input / output Mating connector
Housing PHR-4
(JST)
180
15
Mounting hole: 12 - M3
Driving depth: 3.5mm max.
CN101
15
15
45
15
10
25±0.4
Model: S2B-PH-SM4-TB (JST)
Material Base: Nylon66 UL94V-0
5
Post: Tinning with copper alloy/brass underlayer
Pin Input / output Mating connector
1
5V input
2
-12V output
Housing PHR-2
(JST)
Dimensional tolerance shall be ±0.5
unless otherwise specified.
Mounting hole: 4 - M3
Driving depth: 3.5mm max.
70
35
Optional Components Sold separately
Cable
Model
Type
Description
WH-M2022-500-01
Main power cable (20-pin)
Connect the diverging 2-pin connector to the battery package.
WH-02VH02VH-250
Battery connection cable (power cable)
Signal harness to be connected to a power supply.
WH-S1004-500
WH-S1004-500-01
SIG cable
SIG cable
COM port connector type (Refer to p.363, p.371 for details.)
COM port connector type (Refer to p.363, p.371 for details.)
WH-S0604-500
SIG cable
6-pin connector type
WH-CO4PH-500
SIG cable
Semi-stripping
Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright
2013 Nipron Co., Ltd.
Battery package
412