Distributed by:
www.Jameco.com ✦ 1-800-831-4242
The content and copyrights of the attached
material are the property of its owner.
Jameco Part Number 468703
Series 1
10-90Amp • 120/240 Vac - AC OUTPUT
Featuring state-of-the-art Surface
Mount Technology, these SPST-NO
relays deliver proven reliability in the
most demanding applications. Output
consists of an SCR AC switch and is
available in zero-cross, random turnon (phase controllable) and normally
closed (Form B) versions with either
AC or DC input (coil) control.
Manufactured in Crydom’s ISO 9001
Certified facility for optimum product
performance and reliability.
• Zero Voltage and Random
Turn-On Switching
• Panel Mount
• 600V Transient Capability
• Internal Snubber
• 110 & 125A Models
Available
• Integrated Overvoltage
Protection by Automatic
Self Turn-On (Suffix P)
A1210
D1210
A1225
D1225
A1240
D1240
A2410
D2410
A2425
D2425
A2450
D2450
A2475
D2475
A2490
D2490
24-140
24-140
24-140
24-280
24-280
24-280
24-280
24-280
10
25
40
10
25
50
75
90
Min. Load Current, [mArms]
40
40
40
40
40
40
40
40
Transient Overvoltage [Vpk]
400
400
400
600
600
600
600
600
Max. Surge Current, (16.6ms) [Apk]
120
250
625
120
250
625
1000
1200
Max. On-State Voltage Drop @ Rated Current [Vpk]
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
Thermal Resistance Junction to Case (R qJC) [°C/W]
1.48
1.02
0.63
1.48
1.02
0.63
0.31
0.28
60
260
1620
60
260
1620
4150
6000
8
8
8
10
10
10
10
10
500
500
500
500
500
500
500
500
0.5
0.5
MODEL NUMBERS
AC CONTROL
DC CONTROL
OUTPUT SPECIFICATIONS 1
Operating Voltage (47-63 Hz) [Vrms]
Max. Load Current
3
[Arms]
Maximum I 2 t for Fusing, (8.3 msec.) [A 2 sec]
Max. Off-State Leakage Current @ Rated Voltage [mArms]
Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec]
Max. Turn-On Time
2
4
1/2 Cycle (DC Control), 10.0 msec (AC Control)
1/2 Cycle (DC Control), 40.0 msec(AC Control)
Max. Turn-Off Time
0.5
Power Factor (Min.) with Max. Load
INPUT SPECIFICATIONS 1
DC CONTROL
0.5
0.5
0.5
AC CONTROL
0.5
0.5
24V AC/DC CONTROL
(E SUFFIX)
Control Voltage Range
3-32 Vdc
Max. Reverse Voltage
-32 Vdc
---
Max. Turn-On Voltage
3.0 Vdc
90 Vrms
18 Vrms/Vdc
Min. Turn-Off Voltage
1.0 Vdc
10 Vrms
4.0 Vrms/Vdc
1500 Ohms
60K Ohms
9.0K Ohms
Nominal Input Impedance
Typical Input Current
90-280 Vrms (60Hz)
3.4mA @ 5 Vdc, 20mA @ 28Vdc
18-36 Vrms/Vdc
---
2mA @ 120 Vrms, 4mA @ 240 Vrms
GENERAL NOTES
1 All parameters at 25° C unless otherwise specified.
2 Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3 Heat sinking required, for derating curves see page 3.
4 Turn-on time for random turn-on versions is 0.02 msec (DC Control Models).
SERIES1
Rev. 031507
PAGE 1 OF 3
3mA @ 24 V
© 2007 CRYDOM CORP, Specifications subject to change without notice.
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Inc., 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: sales@crydom.com WEB SITE: http://www.crydom.com
UK: +44 (0)1202 606030 • FAX +44 (0)1202 606035 Crydom SSR Ltd., Arena Business Centre,
Holyrood Close, Poole, Dorset BH17 7FJ, Email: intsales@crydom.com.
GERMANY: +49 (0)180 3000 506
Series 1
10-90Amp • 120/240 Vac - AC OUTPUT
GENERAL SPECIFICATIONS
Dielectric Strength 50/60Hz Input/Output/Base
4000 Vrms
10 9 Ohm
Insulation Resistance (Min.) @ 500 Vdc
Max. Capacitance Input/Output
8 pF
Ambient Operating Temperature Range
-40 to 80°C
Ambient Storage Temperature Range
-40 to 125°C
MECHANICAL SPECIFICATIONS
Weight: (typical)
Encapsulation:
Terminals:
AVAILABLE OPTIONS
-B
Normally Closed (Form B)
Example: D2450-B, A2450-B
E
24V AC/DC Input
Example: A2450E
F
Faston Terminals (Up to 50A Models)
Example: D1225F
3.0 oz. (86.5g)
Thermally Conductive Epoxy
Screws and Saddle Clamps Furnished, Unmounted
1.10
(27.9)
.45
(11.4)
MOUNTING
HOLE/SLOT
0.17 (4.3) DIA.
OUTPUT
1
--
Input Status LED.
Example: D2450G
Note: Control Voltage Range 4.5-32Vdc
for DC Control Models.
P
-10
H
400 Hz Operation
10-50 Amp Models Only
Zero Cross Switching Only
Example: 4D2450
Random Turn-On (AC & DC Control)
Phase Controllable (DC Control)
Example: D2450-10
Fastons:
Single pair (up to 25A)
Double pair* (up to 50A).
*Caution: User must connect to both pairs
6-32 TERMINAL
(2 PLACES)
1.10
(27.9)
.45
(11.4)
OUTPUT
1
--
4
1.00
(25.4)
1.80
(45.7)
2.30
(58.4)
2
+
INPUT
.78
(19.8)
.90
(22.9)
FASTON TERMINAL
.250 X .032 (2 PLCS.)
.87 REF.
(22.2)
1.87
(47.5)
BASE PLATE
.125 (3.2)
2.30
(58.4)
1.70
(43.2)
3
1.00
(25.4)
1.80
(45.7)
MOUNTING
HOLE/SLOT
0.17 (4.3) DIA.
Screw Torque Requirements:
6-32 Screws - 10 in. lbs.,
8-32 and 10-32 Screws - 20in. lbs.
(Screws dry without grease.)
+
INPUT
BASE PLATE
.125 (3.2)
Internal Overvoltage Protection.
Relay Will Self Trigger Between
450-600 Vpk. Not Suitable For Capacitive Loads.
Not Available with -B Option
Example: D2425P
4D
2
1.87
(47.5)
4
G
8-32 TERMINAL
(2 PLACES )
1.70
(43.2)
3
FASTON
TERMINAL
.187 X .032
(2 PLCS.)
.78
(19.8)
.90
(22.9)
Heat Transfer Pad (Attached)
Example: D2450H
Ordering System: Combination of the
suffixes should be made in the following order:
EFPG-10.
Example: A2450EFPG-10
SERIES1
Rev. 031507
PAGE 2 OF 3
E116949
LR81689
10143 UG
All dimensions are in inches (millimeters)
© 2007 CRYDOM CORP, Specifications subject to change without notice.
APPROVALS
UL
CSA
VDE
Crydom Heat Sinks offer excellent
thermal management and are perfectly matched to the load current ratings of Crydom panel mount relays.
Request Crydom’s Heat Sink specification sheet for all the details.
(Not Applicable: -B and 4D)
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Inc., 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: sales@crydom.com WEB SITE: http://www.crydom.com
UK: +44 (0)1202 606030 • FAX +44 (0)1202 606035 Crydom SSR Ltd., Arena Business Centre,
Holyrood Close, Poole, Dorset BH17 7FJ, Email: intsales@crydom.com.
GERMANY: +49 (0)180 3000 506
Series 1
10-90Amp • 120/240 Vac - AC OUTPUT
CURRENT DERATING CURVES
10A
25A
12
30
1°C/W
25
NO HEATSINK
115
4
120
100
3°C/W
2°C/W
20
15
110
10
NO HEATSINK
5
120
0
0
2
4
6
8
10
Load Current [Arms]
50A
20
40
60
5
80
Max Ambient Temp. [°C]
10
15
.5°C/W
25
20
40
60
80
Max Ambient Temp. [°C]
90A
120
1°C/W
20
Load Current [Arms]
75A
60
Base Plate Temp [°C]
110
5°C/W
8
Power Dissipation
Power Dissipation
9°C/W
95
3°C/W
Base Plate Temp [°C]
7°C/W
90
120
90
.5°C/W
.2°C/W
110
40
0
10
20
30
Load Current [Arms]
40
50
20
40
60
Max Ambient Temp. [°C]
80
100
1°C/W
110
40
120
120
120
NO HEATSINK
0
.4°C/W
80
0
15
30
45
Load Current [Arms]
60
75
20
40
60
Max Ambient Temp. [°C]
80
20
40
60
Load Current [Arms]
80
0
20
40
60
80
Max Ambient Temp. [°C]
© 2007 CRYDOM CORP, Specifications subject to change without notice.
SERIES1
Rev. 031507
PAGE 3 OF 3
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Inc., 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: sales@crydom.com WEB SITE: http://www.crydom.com
UK: +44 (0)1202 606030 • FAX +44 (0)1202 606035 Crydom SSR Ltd., Arena Business Centre,
Holyrood Close, Poole, Dorset BH17 7FJ, Email: intsales@crydom.com.
GERMANY: +49 (0)180 3000 506
Base Plate Temp [°C]
1°C/W
Power Dissipation
110
20
100
80
Base Plate Temp [°C]
100
2°C/W
.3°C/W
.5°C/W
Power Dissipation
Power Dissipation
40
Base Plate Temp [°C]
95
1.5°C/W
ANNEX – ENVIRONMENTAL INFORMATION:
The environmental information disclosed in this annex including the EIP
Pollution logo are in compliance with People’s Republic of China Electronic
Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution
Caused by Electronic Information Products.
Part
Toxic or hazardous Substance and Elements
Name
Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated
(Pb) (Hg)
(Cd)
Chromium
biphenyls
diphenyl ethers
(Cr (VI))
(PBB)
(PBDE)
Semiconductor
X
O
O
O
O
O
die
Solder
X
O
O
O
O
O
䰘ӊ - ⦃ֱֵᙃ:
䚼ӊ
ৡ⿄
ञᇐԧ㢃⠛
⛞᥹⚍
ℸ䰘ӊ᠔ᷛ⼎ⱘࣙᣀ⬉ᄤֵᙃѻક∵ᶧ೒ᷛⱘ⦃ֱֵᙃ
ヺড়ЁढҎ⇥݅੠೑⬉ᄤ㸠Ϯᷛ‫ ޚ‬SJ/T11364 - 2006, ⬉ᄤֵᙃѻક∵ᶧ᥻ࠊᷛ䆚㽕∖
᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴
䪙
∲
䬝
݁Ӌ䫀
໮⒈㘨㣃
໮⒈Ѡ㣃䝮
(Pb) (Hg) (Cd) (Cr (VI))
(PBB)
(PBDE)
X
O
O
O
X
O
O
O
O
O
O
O
© 2007 CRYDOM Inc., Specifications subject to change without notice.