SPECIFICATION SHEET
JOB NAME
COMPONENTS
MODEL #
LED Control
CPS 10875
LAMP
Determine the maximum fixture wattage per circuit by adding the wattage of each fixture together and choose an LED power
supply that has an available output wattage greater than the total wattage of the fixtures.
Model Number/Style
Select LED Power Supply
CPS 10875
Not all options are available in all configurations, consult factory for details.
LED
POWER SUPPLY
AVAILABLE
OUTPUT WATTS
INPUT
VOLTAGE
OUTPUT
VOLTAGE
DESCRIPTION
MANUFACTURER
PS15
25.0W
120-277 AC
24V DC
DAMP LOCATION RECOGNIZED, CLASS 2 120-277 DIMMING
AC LED
PS16
60.0W
120-277 AC
24V DC
DAMP LOCATION RECOGNIZED, CLASS 2 120-277 DIMMING
AC LED
PS18
60.0W
120-277 AC
24V DC
DAMP LOCATION RECOGNIZED, CLASS 2 120-277 DIMMING
AC LED
PS17
100.0W
120-277 AC
24V DC
DAMP LOCATION RECOGNIZED, CLASS 2 120-277 DIMMING
AC LED
PS03
84.6W
120-277 AC
24V DC
WET LOCATION RECOGNIZED, CLASS 2 IP66 RATED 120-277
OSRAM SYLVANIA
SHAPE
See CPS11411 for RGB and DMX interface options.
LED Power Supply Specification Notes
• LED power supplies are ordered separately from LED fixtures.
• Multiple fixtures may be connected to one LED power supply to create a circuit.
• Power supplies are not shipped with an enclosure. PSE option will include a Damp Power Supply Enclosure.
• Power supplies are Class 2 rated and carry a 5-year warranty.
Remote Wiring Requirements
• Low voltage circuits are limited by current capacity and voltage drops through conductors.
• Determine the appropriate cable following the Maximum Cable Length table provided (right).
• All fixtures and circuit branches are to be wired in parallel (positive to positive, negative to negative).
• Install and connect LED power supply to fixtures in accordance with NEC and local regulations.
SPI Lighting • 262.242.1420 • contact@spilighting.com • © 2016 Design modification rights reserved.
Maximum Cable Length
WIRE AWG
18
16
24V DC
86.4W
19’
30’
24V DC
100W
22’
35’
24V DC
60W
38’
55’
24V DC
25W
40’
140’
11018
SPECIFICATION SHEET
JOB NAME
Components
JOB NAME
LED Control
COMPONENTS
CPS 10875
LED Control
Components
Components
LED Control
Components
Components
LED Control
CPS 10875
Enclosures for Power
CPS 10875
CPS 10875
CPSCPS
10875
10875
LED Control
LED Control
❶
Enclosures for Power Supplies
❶
❶
❶ ❶
13.20"
13.20"
12.60"
13.20" 13.20"
12.60"
12.60" 12.60"
2.21"
3.19"
2.21"
2.21"
2.21"
11.75"
3.19"
23.70"
23.70"
23.10"
23.70" 23.70"
23.10"
3.19"
23.10" 23.10"
2.21"
2.21"
3.19"
2.21"
2.21"
2.21"
• One Each Side
• Two Total
Use with Supplies:
Knock-Out
for 1/2 Trade •Conduit
Knock-Out for
1/2 Trade Conduit:
PS15
Knock-Out
for
1/2
Trade
Conduit:
• One Each Side
•
PS16
•
One
Each
Side
Knock-Out
Knock-Out
for
1/2
Trade
for
1/2
Conduit:
Trade
Conduit:
•• One
Two Each
Total Side
•
PS17
• One Each
•• One
Side
Each
Side
Two Total • Two Total
• Two Total
• Two Total
• (1) DIM
23.10"
• One Each Side
• Two Total
22.29"
22.29"
22.29" 22.29"
❸
8.50"
Can Accept up to the Following Su
Knock-Out for 1/2 Trade Conduit:
for 1/2 Trade Conduit
Knock-Out
forKnock-Out
1/2 Trade Conduit:
Combination of Them
• One Each
Side
Knock-Out
Knock-Out
1/2 Trade
for 1/2Conduit:
Trade Conduit:
•• for
One
• (2) DIM
Two Each
Total •Side
One Each Side
• One Each
•• One
Side
Each Side
22.29"
Two
Total
• (2) RGB DIM
• Two Total
• Two Total • Two Total
• (2) RGB SEQ
Can Accept up to the Following Supplies, or
• (2) RGB DMX
Can
Accept
up
to
the
Following
Can
Accept
up
to
the
Following
Supplies,
or
Combination of Them
Can Accept
Can
up
Accept
to theupSupplies,
Following
toThem
the Following
Supplies,
Supplies,
or
or of Them:
or
Combination
Combination
of
• (2) DIM
Combination
Combination
of Themof Them
•• (2)
(2)DIM
RGB DIM
• (2) DIM
• (2) DIM
•• (2)
DIM DIM
• (2)
(2)RGB
RGB SEQ
• (2) RGB DIM
• (2) RGB
•• (2)
DIMRGB
DIM
• (2)
(2)RGB
RGBSEQ
DMX
• (2) RGB SEQ
• (2) RGB
•• (2)
SEQ
RGB
(2)
RGB SEQ
DMX
Knock-Out for 1/2 Trade Conduit:
• (2) RGB
• (2)
DMX
RGB DMX
• (2) RGB DMX
• Two on Opposite Side
8.00"
❸
❸
❸ ❸
8.50"
8.00"
• (1) RG
• (1) RG
Use with Supplies:
Use with Supplies:
• (1) RGB DIM
Use
with Supplies:
• (1) RGB SEQ
• PS15
Use withUse
with Supplies:
•
(1)
RGB
SEQ
••Supplies:
PS15
• PS15
• (1)• (1)
RGBRGB
DMXDIM
PS16
• (1) RGB
•• (1)
SEQ
RGB
• PS15 •• PS15
(1)
RGB SEQ
DMX
• PS16
PS17
• PS16
•
(1)
RGB
• (1) RGB
• (1)
DMX
RGB DMX SEQ
• PS16 •• PS16
• PS17
(1) DIM • PS17
• (1) RGB DMX
• PS17 •• PS17
• (1)
(1)DIM
RGB DIM
•
(1)
DIM
• (1) DIM
•• (1)
DIM
(1) RGB DIM
Knock-Out for 1/2 Trade Conduit:
• (1) RGB
• (1)
DIMRGB DIM
23.70"
❷
3.19"
3.19"
3.19"
Knock-Out for 1/2 Trade Conduit:
12.60"
11.75"
11.75"
11.75" 11.75"
❷
❷
❷ ❷
LAMP
JOB NAME
JOB NAME JOB NAME
NO.
SuppliesMODEL LAMP
MODEL NO.
MODEL NO. MODEL NO.
LAMP
13.20"
LAMP
LAMP
LAMP
2.21"
3.19"
3.19"
3.19"
MODEL NO.
SPECIFICATION SHEET
MODELSHEET
#
SPECIFICATION
JOB NAME
SPECIFICATION
SPECIFICATION
SHEET SHEET
Enclosures for Power Supplies
Enclosures for Power Supplies
Enclosures
Enclosures
for Power
for Power
Supplies
Supplies
SPECIFICATION SHEET
• Four Total
Use with Supplies:
Knock-Out for 1/2 Trade Conduit:
Knock-Out
for 1/2 Trade
• PS18
• Two on Opposite
SideConduit:
for 1/2 Trade Conduit
Knock-Out
Knock-Out
forKnock-Out
1/2Conduit:
Trade
• for
Two1/2
on Trade
Opposite
Side Conduit:
8.50"
8.50"
8.00"
8.50"
8.00"
8.00"
• Four Total
• Two on
•• Opposite
Two
Opposite
Side Side
Fouron
Total
• Two on Opposite Side
• Four Total
• Four Total
• Four Total
Use with Supplies:
Use
with
Supplies:
• PS18
Use with Supplies:
Use withUse
with Supplies:
•Supplies:
PS18
• PS18 • PS18
• PS18
7.13"
2.13"
7.13"
7.13"
7.13"
7.13"
2.13"
SPI Lighting • 262.242.1420
• contact@spilighting.com • © 2016 Design modification rights reserved.
2.13"
2.13"
2.13"
Tel (262)242-1420
contact@spilighting.com
11018
©2015 Design modification rights r
Constant Voltage LED Driver
ACELEDS.COM
Model Number
AC-A25VD24H1.04
Input Voltage: 120-277V
Input Frequency: 50/60Hz
Side Mount/Leads
Dimming
ELECTRICAL SPECIFICATIONS:
Output
Power
Input
Current
Minimum
PF
(full load)
Max. THD
(full load)
Output
Voltage
Output
Current
T case
Maximum
Minimum
Starting
Temp.
Efficiency
Up To
Dimming
Protocol
Dimming
Range
IP
Rating
25W
0.26A @ 120V
0.12A @ 277V
>0.95
<10%
24V ±5%
0.104
to 1.04A
90° C
-40° C
82%
0 to 10V
10 to
100%
IP66
WIRING:
PHYSICAL:
Hot Spot
Dimensions
Lead Lengths
Black
White
5.9"
5.9"
Blue
Red
5.9"
5.9"
Purple
Gray
9.8"
9.8"
Length
Width
Height
Mounting Length
Mounting Hole Distance
Mounting Hole Diameter
Weight
Case Qty.
9.5"
1.7"
1.14"
8.9"
1.0"
.20"
1.32 lbs.
30 pcs.
SAFETY:
•UL and cUL Recognized
•UL1310 Class 2
•UL Outdoor Type 1
•Class A sound rating
•Overload Protection
•Open/Short Circuit Protection
•LED driver has a life expectancy of
50,000 hours at Tcase of ≤75°C
•LED driver has a life expectancy of
100,000 hours at Tcase of ≤65°C
•Warranty: 5 yrs based on max case temp of
<75°C; 3 yrs based on max case temp of 90°C*
•Input/Output Isolation
•FCC Title 47 CFR Part 15
•Surge Protection (2 KV)
INSTALLATION:
•LED drivers shall be installed inside electrical enclosures
•18 AWG 600V/105C tinned strand copper lead-wires are required for installation
• Max Remote installation distance is 18 ft
• LED driver cases should be grounded
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of
5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly
installed and under normal conditions of use. See aceleds.com for complete warranty policy.
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.com
Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2015
Revised 06/26/2015
RoHS
COMPLIANT
L E A D - F R E E
TM
y
z
{
|
}
~
|

€

‚

á
â
ã
ä
ä
:
Dimming
ô
ã
ã
ë
æ
õ
"
"
é
#
(
+
,
-
.
-
2
(
3
"
&
'
'
'
'
&
'
'
(
)
*
0
(
1
8
7
:
;
<
=
)
!
8
=
÷
ø
ì
ù
ú
é
ê
ø
î
ï
ð
ð
ñ
>
@
A
8
C
=
D
+
0
E
û
ä
ñ
û
í
ë
õ
ä
â
ö
ÿ
ù
ù
þ
#
)J½GMIRG]
"
1
"
/
"
#
#
#
#
"
1
/
5
-
"
#
#
"
1
'
2
6
(
1
#
6
(
"
1
,
?
<
8
A
8
A
F
G
D
8
F
H
7
@
0
ó
C
B
>
,
ò
í
=
,
<
,
;
#
-
8
:
(
*
0
7
ö
æ
(
8
,
=
ë
9
8
ý
é
ç
'
8
ç
7
"
(
%
%
ê
$
ä
é
/
4
ê
ü
!
!
é
#
è
!
ì
ñ
ç
ç
ä
é
ô
æ
õ
ç
å
=
7
C
8
,
<
8
7
0
,
7
:
<
8
8
C
A
N
O
P
Q
R
S
O
T
R
S
0IRKXL
;MHXL
,IMKLX
1SYRXMRK0IRKXL
J
U
I
X
V
X
V
Q
o
p
Q
R
q
r
s
J
V
V
W
t
W
w
c
]
d
J
W
V
U
d
x
u
]
k
v
c
U
J
U
d
\
]
^
_
`
^
a
b
\
c
d
e
`
[
\
]
^
_
`
^
a
b
\
c
d
e
`
f
_
g
^
h
V
U
d
W
g
j
d
_
d
V
i
k
+VE]
;IMKLX
W
U
W
V
W
V
Z
L
g
f
d
m
_
n
W
V
U
V
Z
l
i
PFW
TGW
ˆ90ERHG906IGSKRM^IH
ˆ90'PEWW
ˆ903YXHSSV8]TI
ˆ'PEWW%WSYRHVEXMRK
ˆ3ZIVPSEH4VSXIGXMSR
Y
S
U
J
X
W
Z
[
V
&PEGO
;LMXI
W
W
X
W
V
ˆ3TIR7LSVX'MVGYMX4VSXIGXMSR
ˆ0)(HVMZIVLEWEPMJII\TIGXERG]SJ
LSYVWEX8GEWISJ)
ˆ0)(HVMZIVLEWEPMJII\TIGXERG]SJ
LSYVWEX8GEWISJ)
I
J
M
K
J
L
K
L
ˆ;EVVERX]]VWFEWIHSRQE\GEWIXIQTSJ
„']VWFEWIHSRQE\GEWIXIQTSJ„'
ˆ-RTYX3YXTYX-WSPEXMSR
ˆ*''8MXPI'*64EVX
ˆ7YVKI4VSXIGXMSR/:
ˆ0)(HVMZIVWWLEPPFIMRWXEPPIHMRWMHIIPIGXVMGEPIRGPSWYVIW
ˆ0)(HVMZIVGEWIWWLSYPHFIKVSYRHIH
ˆ1E\6IQSXI-RWXEPPEXMSR(MWXERGI[LIRYWMRK%;+[MVIMWJX
ˆ1E\6IQSXI-RWXEPPEXMSR(MWXERGI[LIRYWMRK%;+[MVIMWJX
%')[EVVERXWXSXLITYVGLEWIVXLEXIEGL0)((VMZIV[MPPFIJVIIJVSQHIJIGXWMRQEXIVMEPSV[SVOQERWLMTJSVETIVMSHSJ
]IEVW[LIRSTIVEXIHEXQE\GEWIXIQTSJYTXS „']IEVWJVSQHEXISJQERYJEGXYVI[LIRSTIVEXIHEXEQE\GEWIXIQTSJ
YTXS„'[LIRTVSTIVP]MRWXEPPIHERHYRHIVRSVQEPGSRHMXMSRWSJYWI7II[[[EGIPIHWGSQJSVGSQTPIXI[EVVERX]TSPMG]
RoHS
COMPLIANT
L E A D - F R E E
%ZIRYI(%VPMRKXSR8<ˆˆ[[[EGIPIHWGSQ
(EXEMWFEWIHYTSRXIWXWTIVJSVQIHF]%')PIGXVSRMGWMREGSRXVSPPIHIRZMVSRQIRXERHVITVIWIRXEXMZITIVJSVQERGI%GXYEPTIVJSVQERGIGERZEV]
HITIRHMRKSRSTIVEXMRKGSRHMXMSRW7TIGM½GEXMSRWEVIWYFNIGXXSGLERKI[MXLSYXRSXMGI%PPWTIGM½GEXMSRWEVIRSQMREPYRPIWWSXLIV[MWIRSXIH
Œ
6IZMWIH
Constant Voltage LED Driver
Model Number
AC-A100VD24H4.1
ACELEDS.COM
Input Voltage: 120-277V
Input Frequency: 50/60Hz
Side Mount/Leads
New Improved
Dimming
ELECTRICAL SPECIFICATIONS:
Output
Power
Input
Current
Minimum
PF
(full load)
Max.
THD
(full load)
Output
Voltage
Output
Current
Input
Power
T case
Maximum
Minimum
Starting
Temp.
Efficiency
Up To
Dimming
Protocol
Dimming
Range
100W
0.98A @ 120V
0.42A @ 277V
>0.95
<10%
24V ±5%
410mA to
4100mA
110W
96° C
-40° C
90%
0 to 10V
10 to
100%
WIRING:
HOT
SPOT
PHYSICAL:
Dimensions
LLC
DESIGN
Lead Lengths
Black
White
5.9"
5.9"
Blue
Red
5.9"
5.9"
Purple
Gray
9.8"
9.8"
Length
Width
Height
Mounting Length
Mounting Hole Distance
Mounting Hole Diameter
Weight
Case Qty.
9.5"
2.4"
1.46"
8.9"
1.5"
.20"
1.98 lbs.
20 pcs.
SAFETY:
•UL and cUL Recognized
•UL1310 Class 2
•UL Outdoor Type 1
•Class A sound rating
•Overload Protection
•Open/Short Circuit Protection
•LED driver has a life expectancy of
50,000 hours at Tcase of ≤75°C
•LED driver has a life expectancy of
100,000 hours at Tcase of ≤65°C
•Warranty: 5 yrs based on max case temp of
<96°C*
•Input/Output Isolation
•FCC Title 47 CFR Part 15
•Surge Protection (2.5 KV)
INSTALLATION:
•LED drivers shall be installed inside electrical enclosures
•18 AWG 600V/105C tinned strand copper lead-wires are required for installation
• Max Remote installation distance is 25 ft
• LED driver cases should be grounded
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period
of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when
properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.com
Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2015
Revised 06/26/2015
RoHS
COMPLIANT
L E A D - F R E E
www.sylvania.com
OPTOTRONIC®
Electronic 24V DC LED Power Supplies
Key Features & Benefits
•Damp and wet rated designs
available for use in outdoor
applications
•Wide Input voltage range: 100-277V AC (select models)
•Broad ambient temperature range
for use in extreme application
conditions
•Electronically stabilized output
voltage with low line ripple
•Integrated dimming (select models)
•Short circuit, overload and overheat
protection for sustained
performance
•High power factor and efficiency
•Compact enclosures for variety of
applications and fixture designs
•UL Class 2 output for safe
operation
•Exceptional line and load regulation
Product Offering
OPTOTRONIC power supplies are compact and electronically stabilized.
The wide range of input voltage, on select models, from 100 to 277
VAC enables worldwide use on single-phase AC power lines. These
supplies are available with 24VDC outputs. OPTOTRONIC power
supplies are protected against open circuit, short circuit, overload and
overheating conditions. They meet the highest industry standards.
Ordering Abbreviation
Output Wattage
Output Voltage
OT17W/24V/UNV17 24
OT20W/24V/120-240V/SQ20
24
OT30/120/24CORD30 24
OT50W/24V/120V/LP50
24
OT75W/24V/UNV75 24
OT96W/24V/UNV96 24
OT96W/24V/UNV/DIM*96
24
OT96W/24V/UNV/JBX96
24
OT240W/3X24V/120-240V/JBX240
24
LED power supplies compatible with: 24V LED Modules
*Dimmable
Application Information
Specifications and Certifications
Applications
•
•
•
•
•
•
•
Ambience lighting inside furniture
Backlighting
Compact installations
Effect lighting
General lighting
Low & medium power applications
Panel lighting
•
•
•
•
Path and roadway marking
Signs
Step and seat marking
Wall washing
OT17, OT20, OT75, OT96, OT96DIM: UL 1310,
UL48 Recognized for US & Canada Class 2 Unit
OT50: UL1310 Recognized for US & Canada Class 2 Unit
OT96 (NAED 51626) & OT240 (NAED 51627): UL48 Listed
for US & Canada Class 2 Unit
OT30: ETL listed and
conforms to UL1310
OT75 is CSA approved
FCC 47CFR Part 15 compliant
ECS050R16 9-13
Specification Data
Fixture Description:
Type
Project/Job:
SYLVANIA lamp:
SYLVANIA ballast:
Notes:
Ordering Information
Nominal
Nominal
Nominal Output Max.
Input
Input
Input Output
Power
Line
Item
Ordering
Voltage Current
Power
Power Voltage
Range
Ripple
UL/ETL
Location
Number
Abbreviation
(V)
(A)
Factor
(W)
(VDC)*
(W)
(V)
File #
Rating
51622OT17W/24V/UNV*
120
0.19 0.92 21
24.0 0.8-17 ±1.0V E220096Damp
2770.10
51512
OT20W/24V/120-240V/SQ
120
0.38 0.5
23
24.0
0.9-20
±0.2V
E258264
Dry
2400.19
51521OT30/120/24CORD
120
0.63
0.5 38
24.0 1-30
±1.5V 3137489 Dry
51598OT50W/24V/120V/LP
120
0.47 0.99 56
24.0 0.9-50 ±0.2V E248522 Dry
515143 OT75W/24V/UNV
120
0.76
0.99
90
24.0
0.9-75
±0.2V
E258264
Damp
2770.33
515224 OT96W/24V/UNV
120
0.97
0.9
107
24.0
1-96
±1.0V
E320395
Damp
277
0.39
51626OT96W/24V/UNV/JBX
120
0.91 0.99 108
24.0 0.8-96 ±1.0V E320395 Wet2
277
0.39
UL Listed
51627 OT240W/3X24V/120-240V/JBX120
2.39
0.99
285
24.0
0.8-240
±1.0V E320395 Wet2
240
1.19
UL Listed
*7W is the minimum output power required when operating at the 277V input voltage.
Dimmable Power Supply
Nominal Nominal
Nominal Input
Input
Input Item
Ordering
Voltage Current Power Power Number
Abbreviation
(V)
(A)
Factor
(W)
51520
OT96W/24V/UNV/DIM
120
0.97
0.9
107
2770.39
Output
Voltage
Range
(VDC)*
24.0
Output Max.
Power
Line
Range Ripple Dimming
(W)
(V)
Mode
1-96
±1.0V PWM
Dimming
Control
0-10V DC
Dimming
Range
10 –100%
UL
Location
File #
Rating
E320395 Damp
*Output Voltage tolerance ±5%
Notes:
1. All power supplies can be remote mounted up to 32 feet. Although it is possible to exceed the remote mounting distance, the installer and/or end user must take precautions to prevent
and/or test the effects of EMI (electromagnetic interference).
2. Use wiring rated and marked PLTC, CL3R, and “sun resistant”
3. 51514 replaces 51513 (OT75/120/24), which is discontinued
4. 51522 replaces 51510, which is discontinued
Ordering Guide
OT
OPTOTRONIC® 240W
/
Output Wattage 3x24V
/
Output Voltage 120-240
Input Voltage
/
JBX
Junction Box
Minimum and Maximum Ratings
Parameter
Power Supply
Values
Input Voltage Range (Min/Max)
OT20 and OT240
108-254 VAC
OT30 and OT50
108-132 VAC
OT17, OT75 and OT96
108-305 VAC
Input Frequency
50/60Hz
Ambient Temperature Range
OT20 and OT50
-20°C through +50°C
OT30, OT96
-20°C through +40°C
OT75
-25°C through +60°C
OT17, OT96JBX and OT240
-30°C through +70°C (2% de-rating per °C from 50°C)
Max. Case Temperature
OT30
45°C
OT5070°C
OT20, OT96
75°C
OT17, OT75, OT96JBX and OT240
90°C
Assembly and Wiring Diagrams
0.16"
(4mm)
OT17 Case:
7.87"
(200mm)
Packaging:
Quantity: 50 pieces/carton
Weight: 0.36 lbs each (approx.)
18.3 lbs/carton
Wiring: Leads only (no connectors)
Input: 6" (18AWG wire) black & white wires
Output: 6" (18AWG wire) gray+ and black– wires
8.27"
(210mm)
0.87"
(22mm)
8.43"
(214mm)
0.98"
(25mm)
0.08"
(2mm)
2.20"
(56.0mm)
OT20 Case:
Packaging:
Quantity: 30 pieces/carton
Weight: 0.21 lbs each (approx.)
6.30 lbs/carton
Load side: use 30 to 14
AWG wire
Load
2.20"
(56.0mm)
2.36"
(60.0mm)
Wiring: Connectors only (No leads provided)
Use solid or stranded copper wire only
24VDC
+ –
Line side: use 20 to 12 AWG wire
N
L
Line
1.20"
(30.5mm)
2.36"
(60.0mm)
1.5”
(38.1mm)
OT50 Case:
Packaging:
Quantity: 20 pieces/carton
Weight: 0.4 lbs each (approx.)
8.5 lbs/carton
Wiring: Connectors only (No leads provided)
Use 14-22AWG solid or stranded copper wire only
8.95”
(227.4mm)
9.5”
(241.4mm)
0.65”(16.5mm)
0.18”
(4.6mm)
OUTPUT
Pout(max): 30W
Vout: 24 VDC
Iout: 1.25 ADC
.14"
(3.50mm)
5.63"
(143mm)
.75"
(19.1mm)
OT30 Case:
.22"
(5.60mm)
Packaging:
Quantity: 50 pieces/carton
Weight: 0.63 lbs each (approx.)
31.77 lbs/carton
1.44"
(36.50mm)
.14"
(3.50mm)
6 Feet
1.8 Meters
.12"
(3mm)
(2) MOUNTING HOLES
5.91"
(150mm)
SWITCH
1.57"
(40mm)
1.18"
(30mm)
7 Feet
2.1 Meters
LINE
Pin (max): 30W
Vin: 120VAC/50/60HZ
Iin: 0.60A (nom.)
Assembly and Wiring Diagrams (continued)
Warranty
OPTOTRONIC® Products are covered by our
LED Module, OPTOTRONIC Power Supply or
Control Warranty. For additional details, refer
to the latest version of the warranty
available at www.sylvania.com/LED.
OT75 & OT96 Case:
1.17"
(29.7mm)
9.48"
(240.7mm)
Wiring: Leads only (no connectors)
AC Input: 9" (18AWG wire) black & white wires
Output: 9" (18AWG wire) red+ & blue– wires
OT96DIM only:
DIM Input: 9" (18AWG wire) gray & purple
DIM Output: 9" (18AWG wire) yellow
8.94"
(227mm)
1.68"
(42.7mm)
Black (L)
NON-DIMMABLE
White (N)
VOLTAGE
120-277 V AC
50/60Hz
Purple (+)
Input
Gray (-)
Black (L)
Pout (max): 96 W
Vout: 24VDC
Iout: 0.04-4ADC
Purple (+)
Input
24V DC (+)
Pout (max): 96 W
Vout: 24VDC
Iout: 0.04-4ADC
Packaging:
Quantity: 16 pieces/carton
Weight: 2 lbs each (approx.)
33 lbs/carton
Wiring: Leads only (2.76" 18AWG wire)
Input: black (L), white (N), & green/yellow (GRD)
wires with a UL Listed, 1/2" metallic fitting
Output: gray (+) & black (–) with a UL Listed,
1/2" plastic fitting
OT240 Case:
Packaging:
Quantity: 5 pieces/carton
Weight: 11 lbs each (approx.)
53 lbs/carton
Wiring: Leads only (6.9" 18AWG wire)
80W (max)
Line
Load
80W (max)
24VDC
80W (max)
RED
Return (-) BLUE
n.c.
DIM Return (-) YELLOW
0-10 V DC
OT96JBX Case (Wet Rated):
Black (L)
White (N)
Green/Yellow (GRD)
Return (-) BLUE
DIMMABLE
White (N)
RED
DIM Return (-) YELLOW
0-10 V DC
VOLTAGE
120-277 V AC
50/60Hz
Gray (-)
24V DC (+)
Gray (+)
Black (-)
Gray (+)
Black (-)
Gray (+)
Black (-)
n.c.
United States
OSRAM SYLVANIA
100 Endicott Street
Danvers, MA 01923
1-800-LIGHTBULB
Trade
Phone:800-255-5042
Fax:800-255-5043
National Accounts
Phone:800-562-4671
Fax:800-562-4674
OEM/Special Markets
Phone:800-762-7191
Fax:800-762-7192
Retail
Phone:800-842-7010
Fax:800-842-7011
SYLVANIA Lighting Services
Phone:800-323-0572
Fax:800-537-0784
Display/Optic
Phone: 888-677-2627
Fax: 855-543-1043
Canada
OSRAM SYLVANIA LTD.
2001 Drew Road
Mississauga, ON L5S 1S4
1-800-LIGHTBULB
Trade
Phone:800-263-2852
Fax:800-667-6772
OEM/Special Markets/Display/Optic
Phone:800-265-2852
Fax:800-667-6772
Retail
Phone:800-720-2852
Fax:800-667-6772
SYLVANIA Lighting Services
Phone:800-663-4268
Fax:866-239-1278
Mexico
OSRAM MEXICO
Tultitlan/Edo de Mexico
Phone:011-52-55-58-99-18-50
ENCELIUM® Products
United States
Phone:201-508-1570
Fax:201-508-1589
Canada
Phone:905-731-7678
Fax: 905-731-1401
www.sylvania.com
SYLVANIA and The System Solution,
are registered trademarks of OSRAM SYLVANIA Inc.
OSRAM and OPTOTRONIC are registered trademarks of OSRAM GmbH.
Specifications subject to change without notice.
/sylvania
/sylvania
© 2013 OSRAM SYLVANIA 9-13 Packaging:
Quantity: 10 pieces/carton
Weight: 1.35 lbs each (approx.)
14 lbs/carton
eLEDs
Model Number
AC-60VD24H2.5DK
TM
POWER DESIGNS
Type: Constant Voltage LED Driver
Input Voltage: 120-277V
Input Frequency: 50/60Hz
Dimming
ELECTRICAL SPECIFICATIONS:
Output
Power
Input
Current
Minimum
PF
(full load)
Max. THD
(full load)
Output
Voltage
Output
Current
T case
Maximum
Minimum
Starting
Temp.
Efficiency
Up To
Dimming
Protocol
Dimming
Range
IP
Rating
60W
0.6A @ 120V
0.26A @ 277V
>0.95
<10%
24V ±5%
0.25
to 2.5A
90° C
-40° C
86.6%
0 to 10V
10 to
100%
IP66
WIRING:
PHYSICAL:
Lead Lengths
Black 5.9" Purple 5.9"
White 5.9" Gray 5.9" Green
5.9"
Dimensions
Diameter
Height
Mounting Hole Distance
Mounting Hole Diameter
6.36"
1.32"
5.04"
0.141"
Weight
Case Qty.
1.32"
30 pcs.
SAFETY:
•UL and cUL Recognized, Class 2
•UL Outdoor Type 1
•Class A sound rating
•Overload Protection
•No Exterior Case
•Open/Short Circuit Protection
•LED driver has a life expectancy of
75,000 hours at Tcase of ≤70°C
•LED driver has a life expectancy of
100,000 hours at Tcase of ≤65°C
•Warranty: 3 yrs based on max case temp of
<70°C*
•Input/Output Isolation
•FCC Title 47 CFR Part 15
•Surge Protection (2 KV)
INSTALLATION:
•LED drivers shall be installed inside electrical enclosures
•18 AWG 600V/105C tinned strand copper lead-wires are required for installation
• Max Remote installation distance is 38 ft
• LED driver cases should be grounded
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of
3 years when operated at max case temp of up to <70°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty
policy.
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.com
Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2014
Revised 03/07/14
RoHS
COMPLIANT
L E A D - F R E E