Ordering number : EN2939B
SB007-03Q
Schottky Barrier Diode
http://onsemi.com
30V, 70mA, Low IR, Single MCP
Applications
•
High frequency rectification (switching regulators, converters, choppers)
Features
•
•
•
•
• Fast reverse recovery time (trr max=10ns)
Low forward voltage (VF max=0.55V)
Low switching noise
Low leakage current and high reliability due to highly reliable planar structure
Small-sized package permitting SB007-03Q applied sets to be compact and slim
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Repetitive Peak Reverse Voltage
Nonrepetitive Peak Reverse Surge Voltage
Average Output Current
Conditions
Ratings
VRRM
VRSM
Surge Forward Current
IO
IFSM
Junction Temperature
Storage Temperature
50Hz sine wave, 1 cycle
Unit
30
V
35
V
70
mA
2
A
Tj
--55 to +125
°C
Tstg
--55 to +125
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Package Dimensions
Product & Package Information
unit : mm (typ)
7023A-005
• Package
: MCP
• JEITA, JEDEC
: SC-70, SOT-323
• Minimum Packing Quantity : 3,000 pcs./reel
SB007-03Q-TL-E
0.2
0.15
3
Packing Type: TL
Marking
0 to 0.08
1.25
2.1
0.425
2.0
LOT No.
2
0.65
0.9
LOT No.
TL
0.3
Electrical Connection
0.3
0.425
G
1
1 : Anode
2 : No Contact
3 : Cathode
3
MCP
1
Semiconductor Components Industries, LLC, 2013
September, 2013
2
71812 TKIM/62098HA(KT)/D1096 GI/D288TA, TS No.2939-1/5
SB007-03Q
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Reverse Voltage
Ratings
Conditions
min
VR
VF
IR=20μA
IF=70mA
Interterminal Capacitance
IR
C
VR=15V
VR=10V, f=1MHz
Reverse Recovery Time
trr
IF=IR=10mA, See specified Test Circuit.
Forward Voltage
Reverse Current
typ
Unit
max
30
V
0.55
V
5
μA
3.0
pF
10
ns
trr Test Circuit
100Ω
10Ω
10mA
50Ω
1mA
10mA
Duty≤10%
10μs
5V
trr
Ordering Information
Device
Package
Shipping
memo
MCP
3,000pcs./reel
Pb Free
SB007-03Q-TL-E
IF -- VF
2
IR -- VR
1000
5
Reverse Current, IR -- μA
7
5
3
5°C
25°C
2
10
Ta=
12
Forward Current, IF -- mA
100
7
5
3
2
5
100°C
2
10
5
75°C
2
1.0
50°C
5
25°C
2
0.1
5
1.0
2
0.01
7
5
0
0.2
0.4
0.6
0.8
1.0
Forward Voltage, VF -- V
1.2
0
5
10
15
Surge Forward Current, IFSM(Peak) -- A
10
7
5
3
2
1.0
7
5
3
25
30
35
ID00245
IFSM -- t
2.8
f=1MHz
20
Reverse Voltage, VR -- V
ID00244
C -- VR
2
Interterminal Capacitance, C -- pF
C
Ta=125°
2
100
Current waveform 50Hz sine wave
2.4
IS
20ms
t
2.0
1.6
1.2
0.8
0.4
0
5
7
1.0
2
3
5
7
10
Reverse Voltage, VR -- V
2
3
5
ID00246
7 0.01
2
3
5
7 0.1
2
Time, t -- s
3
5
7 1.0
2
3
ID00247
No.2939-2/5
SB007-03Q
Embossed Taping Specification
SB007-03Q-TL-E
No.2939-3/5
SB007-03Q
Outline Drawing
SB007-03Q-TL-E
Land Pattern Example
Mass (g) Unit
0.006 mm
* For reference
Unit: mm
2.1
1.0
0.7
0.65 0.65
No.2939-4/5
SB007-03Q
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.2939-5/5