E-GRIPS Pulling Grips TM Strain Relief Grips Support Grips E-GRIPS Wire Mesh Products From Ericson TM 1-800-ERICSON (374-2766) www.ericson.com Index Introduction................................................................................................................................................................................1 SUPPORT GRIPS How To Select A Support Grip..........................................................................................................................................2-4 Standard Duty Support ......................................................................................................................................................5-8 Heavy Duty Support ................................................................................................................................................................9 Light Duty Service Drop Support ....................................................................................................................................10 Conduit Riser Support....................................................................................................................................................11-14 Bus Drop Grips / Safety Springs.........................................................................................................................................15 Notes............................................................................................................................................................................................16 PULLING GRIPS: How to Select A Pulling Grip ............................................................................................................................................17 Light Duty Junior Grips..................................................................................................................................................18-19 Utility Grips ..............................................................................................................................................................................20 Notes............................................................................................................................................................................................21 STRAIN RELIEF GRIPS: How To Select A Strain Relief Grip .............................................................................................................................22-23 Wide Range Strain Relief Grip............................................................................................................................................24 Cord and Deluxe Cord Features.........................................................................................................................................25 Cord Grips ..........................................................................................................................................................................26-28 Deluxe Cord Grips............................................................................................................................................................29-30 “I”-Grips......................................................................................................................................................................................31 Notes............................................................................................................................................................................................32 TECHNICAL REFERENCE: Working Load and Safety Factor Consideration ........................................................................................................ 33 Lace & Rod Closing Instructions ...................................................................................................................................... 34 Selecting Proper Sized Pulling and Support Grips ..............................................................................................35-36 Notes............................................................................................................................................................................................37 Cross Reference ................................................................................................................................................................38-49 Notes............................................................................................................................................................................................50 1-800-ERICSON (374-2766) • www.ericson.com 1-800-ERICSON (374-2766) • www.ericson.com Introduction ERICSON E-GRIPS - WIRE MESH PRODUCTS FOR OVER 90 YEARS... Ericson Manufacturing Company has been an industry leader that provides products for the safe use and management of temporary power and temporary lighting products and systems. Ericson wire mesh grips are used in a wide variety of cable pulling, strain relieving and weight support applications. Wire mesh grips have traditionally been used in the utility, industrial, mining, construction and OEM markets but find new and interesting applications in the communications, information, military, medical, and aerospace industries. QUALITY We are certified to the latest ISO9001 certified Quality Standards and are known throughout the industry for manufacturing the highest quality products available. We constantly test and measure the quality of our products to meet or exceed your expectations. Ericson quality wire mesh and related products are 100% manufactured in the USA MADE IN THE USA 1 1-800-ERICSON (374-2766) • www.ericson.com Support Grips - Standard Support, Heavy Duty Support, Service Drop, Conduit Riser Grips, and Bus Drops Solid eye assemblies provide superior reinforcement designed to hold the weight for electrical cables as it hangs in vertical, sloping, or horizontal positions. EYE STYLE: Four different eye styles are available per your method of utilizing the support grip. Single, Double (shown), Offset, and Universal Bale. Flag label shows catalog number, full description containing diameter range, barcode, mfg date, and MADE IN USA! Ericson E-Grip Support Grips are designed to hold the weight of cable in a vertical, horizontal, or sloping position. Support grips serve an important function as electrical cables must be supported or their dead weight can cause excessive strain or pullout at the connections resulting in a power failure. Ericson E-Grips are used within any application that requires the mechanical support of cable, metal rods, hose, and tubing. Specific applications include buildings, utility poles, excavations, mine shafts, towers, elevators, terminators, or other structures. MESH STYLE: Three different mesh styles of nonmagnetic tinned bronze are available for anything from light to heavy duty supporting requirements. Closed Mesh are for fitting over a cable end when exposed and a Split Mesh (Lace or Rod) is utilized when the cable end is not exposed. An endless mesh weave provides installation ease onto the cable, allows for adjustments, and provides a reusable support grip without the need for special skills or tools. Conforms to shape of cable or object being supported and permits cable to expand and contract without loss of holding action. 1-800-ERICSON (374-2766) • www.ericson.com 2 Support Grips - Standard Support, Heavy Duty Support, Service Drop, Conduit Riser Grips, and Bus Drops Double How to select the correct Support Grip. Step 1 Refer to the chart below to determine the Support Grip style that is best suited for your application. Step 2 Where available, select an Eye style that is best suited for your supporting application. Step 3 Determine your cable outside diameter. Refer to Technical Reference section. Step 4 Find the mesh grip size that encompasses your cable diameter. Step 5 Select a Mesh style from chart below. Whenever possible, use a closed mesh that assembles over the cable end. If the cable end is not available, use a split mesh such as Lace or Rod Closing. Universal Bale Single Step 6 IMPORTANT! Estimate the tension to be put on the grip, establish the working load you require and compare this to the listed approximate breaking strength of the grip to insure that the grip will be strong enough. For Support Grips, use a Safety Factor of 10. Refer to Technical Reference section for safety and working load considerations. Offset Eye Styles Support Grip Styles Standard Support Grips Heavy Duty Grips Service Drop Bus Drop Conduit Riser 3 Support Vertical Runs to 99 ft. Loads to 600lbs. Electrical cables must be supported or their dead weight can cause excessive strain or pullout at the connections resulting in a power failure. (Diameter Range = .5 to 3.99" and Breaking Strength Range = 500 to 4900 lbs.) Support Vertical Runs over 100 ft. Loads Over 600lbs. Electrical cables must be supported or their dead weight can cause excessive strain or pullout at the connections resulting in a power failure. (Diameter Range = .75 to 4.49" and Breaking Strength Range = 2820 to 12070 lbs.) Light Duty to Support Service Entrance Cable in sloping, vertical, or horizontal positions. (Diameter Range = .23 to 1.25" and Breaking Strength Range = 290 to 1790 lbs.) Light Duty Support, Indoors Only, On Bus Drop Cable that relieves tension and absorbs vibration which protects the cable. Safety Springs can be used in conjunction to relieve sudden strain on cord or cable overhead systems. (Diameter Range = .22 to 1.25" and Breaking Strength Range = 350 to 1800 lbs.) Support Cable Runs in Rigid (Sched. 40) Conduit. (Diameter Range = .50 to 3.99" and Breaking Strength Range = 290 to 5380 lbs.) 1-800-ERICSON (374-2766) • www.ericson.com Eye Styles Single For use when cable is vertical and for applications where cable bends or for where a single attachment is more advantageous for positioning. Double For use when cable is vertical and extends through the grip without bending. Eyes may be fastened to open hooks, but should not be more than 15 degrees from the axis of the vertical cable. When the eyes are supported equally, this attachment provides a fully balanced load. Offset Similar to single eye applications, but for use when offset positioning is required. Universal Bale Adjustable and self-locking, this attachment fits around a beam, pipe, or other continuous structural object. The bale wraps around the object and is securely anchored in the bar. Mesh Styles Closed Permanent support when cable end is available for support grip installation. Split Lace Closing Permanent support when cable end is not available for support grip installation. Split Rod Closing Temporary support when cable end is not available for support grip installation Closed Mesh Styles Split Rod Split Lace 1-800-ERICSON (374-2766) • www.ericson.com 4 Support Grips - Standard Duty - Double Eye • Stranded tinned bronze wire. DOUBLE EYE, CLOSED MESH M E DIA. RA. APPROX. BREAKING STRENGTH E M SG-CM-050-DE SG-CM-062-DE SG-CM-075-DE SG-CM-100-DE SG-CM-125-DE SG-CM-150-DE SG-CM-175-DE SG-CM-200-DE SG-CM-250-DE SG-CM-300-DE SG-CM-350-DE .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 530 LBS. 790 LBS. 1020 LBS. 1610 LBS. 1610 LBS. 1610 LBS. 2150 LBS. 3260 LBS. 3260 LBS. 4900 LBS. 4900 LBS. 4 4 4 5 5 5 6 6 6 8 8 10 10 13 14 15 17 19 21 23 25 27 DOUBLE EYE, LACE CLOSING M E PART NUMBER DIA. RA. APPROX. BREAKING STRENGTH SG-LC-050-DE SG-LC-062-DE SG-LC-075-DE SG-LC-100-DE SG-LC-125-DE SG-LC-150-DE SG-LC-175-DE SG-LC-200-DE SG-LC-250-DE SG-LC-300-DE SG-LC-350-DE .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 530 LBS. 790 LBS. 1020 LBS. 1610 LBS. 1610 LBS. 1610 LBS. 2150 LBS. 3260 LBS. 3260 LBS. 4900 LBS. 4900 LBS. PART NUMBER DIA. RA. SG-RC-050-DE SG-RC-062-DE SG-RC-075-DE SG-RC-100-DE SG-RC-125-DE SG-RC-150-DE SG-RC-175-DE SG-RC-200-DE SG-RC-250-DE SG-RC-300-DE SG-RC-350-DE .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 DOUBLE EYE, ROD CLOSING M E LENGTH PART NUMBER APPROX. BREAKING STRENGTH 530LBS. 790LBS. 1020LBS. 1610LBS. 1610LBS. 1610LBS. 2150LBS. 3260LBS. 3260LBS. 4900LBS. 4900LBS. LENGTH E M 4 4 4 5 5 5 6 6 6 8 8 10 10 13 14 15 17 19 21 23 25 27 LENGTH E M 4 4 4 5 5 5 6 6 6 8 8 10 10 13 14 15 17 19 21 23 25 27 E = Eye Length M = Mesh Length at Nominal Diameter (Inches) Support Grip Number Structure Product Type SG = - Support Grips SGHD = Support Grips Heavy Duty (Double Weave) Mesh CM = Closed Mesh LC = Lace Closing RC = Rod Closing - Mesh Diameter Lower Diameter Range of Mesh - Eye Style DE = Double Eye SE = Single Eye OFS = Offset Eye UB = Universal Bale Caution: When selecting a grip, never use to their approximate breaking strength. Refer to Technical Reference section for safety and working load factors. 5 1-800-ERICSON (374-2766) • www.ericson.com Support Grips - Standard Duty - Single Eye • Stranded tinned bronze wire. SINGLE EYE, CLOSED MESH E M SINGLE EYE, LACE CLOSING M E SINGLE EYE, ROD CLOSING M E DIA. RA. APPROX. BREAKING STRENGTH E M SG-CM-050-SE SG-CM-062-SE SG-CM-075-SE SG-CM-100-SE SG-CM-125-SE SG-CM-150-SE SG-CM-175-SE SG-CM-200-SE SG-CM-250-SE SG-CM-300-SE SG-CM-350-SE .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 530LBS. 790LBS. 1020LBS. 1610LBS. 1610LBS. 1610LBS. 2150LBS. 3260LBS. 3260LBS. 4900LBS. 4900LBS. 7 8 8 9 10 12 14 16 18 21 24 10 10 13 14 15 17 19 21 23 25 27 PART NUMBER DIA. RA. SG-LC-050-SE SG-LC-062-SE SG-LC-075-SE SG-LC-100-SE SG-LC-125-SE SG-LC-150-SE SG-LC-175-SE SG-LC-200-SE SG-LC-250-SE SG-LC-300-SE SG-LC-350-SE .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 PART NUMBER DIA. RA. APPROX. BREAKING STRENGTH E M SG-RC-050-SE SG-RC-062-SE SG-RC-075-SE SG-RC-100-SE SG-RC-125-SE SG-RC-150-SE SG-RC-175-SE SG-RC-200-SE SG-RC-250-SE SG-RC-300-SE SG-RC-350-SE .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 530LBS. 790LBS. 1020LBS. 1610LBS. 1610LBS. 1610LBS. 2150LBS. 3260LBS. 3260LBS. 4900LBS. 4900LBS. 7 8 8 9 10 12 14 16 18 21 24 10 10 13 14 15 17 19 21 23 25 27 SG = - Support Grips SGHD = Support Grips Heavy Duty (Double Weave) APPROX. BREAKING STRENGTH 530LBS. 790LBS. 1020LBS. 1610LBS. 1610LBS. 1610LBS. 2150LBS. 3260LBS. 3260LBS. 4900LBS. 4900 LBS. LENGTH E M 7 8 8 9 10 12 14 16 18 21 24 10 10 13 14 15 17 19 21 23 25 27 LENGTH E = Eye Length M = Mesh Length at Nominal Diameter (Inches) Support Grip Number Structure Product Type LENGTH PART NUMBER Mesh CM = Closed Mesh LC = Lace Closing RC = Rod Closing - Mesh Diameter Lower Diameter Range of Mesh - Eye Style DE = Double Eye SE = Single Eye OFS = Offset Eye UB = Universal Bale Caution: When selecting a grip, never use to their approximate breaking strength. Refer to Technical Reference section for safety and working load factors. 1-800-ERICSON (374-2766) • www.ericson.com 6 Support Grips - Standard Duty - Offset Eye • Stranded tinned bronze wire. OFFSET EYE, CLOSED MESH M E OFFSET EYE, LACE CLOSING M E OFFSET EYE, ROD CLOSING M E PART NUMBER DIA. RA. APPROX. BREAKING STRENGTH SG-CM-050-OFS SG-CM-062-OFS SG-CM-075-OFS SG-CM-100-OFS SG-CM-125-OFS SG-CM-150-OFS SG-CM-175-OFS SG-CM-200-OFS SG-CM-250-OFS SG-CM-300-OFS SG-CM-350-OFS .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 500LBS. 750LBS. 950LBS. 1500LBS. 1500LBS. 1500LBS. 2000LBS. 3100LBS. 3100LBS. 3800LBS. 3800LBS. APPROX. BREAKING STRENGTH 500LBS. 750LBS. 950LBS. 1500LBS. 1500LBS. 1500LBS. 2000LBS. 3100LBS. 3100LBS. 3800LBS. 3800LBS. LENGTH E M 4 4 4 5 5 5 6 6 6 9 9 10 10 13 14 15 17 19 21 23 25 27 LENGTH PART NUMBER DIA. RA. SG-LC-050-OFS SG-LC-062-OFS SG-LC-075-OFS SG-LC-100-OFS SG-LC-125-OFS SG-LC-150-OFS SG-LC-175-OFS SG-LC-200-OFS SG-LC-250-OFS SG-LC-300-OFS SG-LC-350-OFS .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 PART NUMBER DIA. RA. APPROX. BREAKING STRENGTH E M SG-RC-050-OFS SG-RC-062-OFS SG-RC-075-OFS SG-RC-100-OFS SG-RC-125-OFS SG-RC-150-OFS SG-RC-175-OFS SG-RC-200-OFS SG-RC-250-OFS SG-RC-300-OFS SG-RC-350-OFS .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 500LBS. 750LBS. 950LBS. 1500LBS. 1500LBS. 1500LBS. 2000LBS. 3100LBS. 3100LBS. 3800LBS. 3800LBS. 4 4 4 5 5 5 6 6 6 9 9 10 10 13 14 15 17 19 21 23 25 27 E M 4 4 4 5 5 5 6 6 6 9 9 10 10 13 14 15 17 19 21 23 25 27 LENGTH E = Eye Length M = Mesh Length at Nominal Diameter (Inches) Support Grip Number Structure Product Type SG = - Support Grips SGHD = Support Grips Heavy Duty (Double Weave) Mesh CM = Closed Mesh LC = Lace Closing RC = Rod Closing - Mesh Diameter Lower Diameter Range of Mesh - Eye Style DE = Double Eye SE = Single Eye OFS = Offset Eye UB = Universal Bale Caution: When selecting a grip, never use to their approximate breaking strength. Refer to Technical Reference section for safety and working load factors. 7 1-800-ERICSON (374-2766) • www.ericson.com Support Grips - Standard Duty - Universal • Stranded tinned bronze wire. UNIVERSAL BALE, CLOSED MESH M E UNIVERSAL BALE, LACE CLOSING M E UNIVERSAL BALE, ROD CLOSING M E E M .50-.62 APPROX. BREAKING STRENGTH 530LBS. 18 10 .63-.74 790LBS. 18 10 SG-CM-075-UB .75-.99 1020LBS. 18 13 SG-CM-100-UB 1.00-1.24 1610LBS. 18 14 SG-CM-125-UB 1.25-1.49 1610LBS. 18 15 SG-CM-150-UB 1.50-1.74 1610LBS. 18 17 SG-CM-175-UB 1.75-1.99 2150LBS. 18 19 SG-CM-200-UB 2.00-2.49 3260LBS. 18 21 SG-CM-250-UB 2.50-2.99 3260LBS. 18 23 SG-CM-300-UB 3.00-3.49 4900LBS. 18 25 SG-CM-350-UB 3.50-3.99 4900LBS. 18 27 PART NUMBER DIA. RA. SG-LC-050-UB SG-LC-062-UB PART NUMBER DIA. RA. SG-CM-050-UB SG-CM-062-UB E M .50-.62 APPROX. BREAKING STRENGTH 530LBS. 18 10 .63-.74 790LBS. 18 10 SG-LC-075-UB .75-.99 1020LBS. 18 13 SG-LC-100-UB 1.00-1.24 1610LBS. 18 14 SG-LC-125-UB 1.25-1.49 1610LBS. 18 15 SG-LC-150-UB 1.50-1.74 1610LBS. 18 17 SG-LC-175-UB 1.75-1.99 2150LBS. 18 19 SG-LC-200-UB 2.00-2.49 3260LBS. 18 21 SG-LC-250-UB 2.50-2.99 3260LBS. 18 23 SG-LC-300-UB 3.00-3.49 4900LBS. 18 25 SG-LC-350-UB 3.50-3.99 4900LBS. 18 27 PART NUMBER DIA. RA. SG-RC-050-UB SG-RC-062-UB SG-RC-075-UB SG-RC-100-UB SG-RC-125-UB SG-RC-150-UB SG-RC-175-UB SG-RC-200-UB SG-RC-250-UB SG-RC-300-UB SG-RC-350-UB .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 Support Grip Number Structure Product Type SG = - Support Grips SGHD = Support Grips Heavy Duty (Double Weave) LENGTH APPROX. BREAKING STRENGTH 530LBS. 790LBS. 1020LBS. 1610LBS. 1610LBS. 1610LBS. 2150LBS. 3260LBS. 3260LBS. 4900LBS. 4900LBS. LENGTH LENGTH E M 18 18 18 18 18 18 18 18 18 18 18 10 10 13 14 15 17 19 21 23 25 27 E = Eye Length M = Mesh Length at Nominal Diameter (Inches) Mesh CM = Closed Mesh LC = Lace Closing RC = Rod Closing - Mesh Diameter Lower Diameter Range of Mesh - Eye Style DE = Double Eye SE = Single Eye OFS = Offset Eye UB = Universal Bale Caution: When selecting a grip, never use to their approximate breaking strength. Refer to Technical Reference section for safety and working load factors. 1-800-ERICSON (374-2766) • www.ericson.com 8 Support Grips - Heavy Duty • Ericson Heavy Duty Support Grips are designed to withstand greater loads and increased stress • Stranded tinned bronze wire. SINGLE EYE, CLOSED MESH, DOUBLE WEAVE M E DOUBLE EYE, CLOSED MESH, DOUBLE WEAVE M E LENGTH DIA. RA. APPROX. BREAKING STRENGTH E M SGHD-CM-075-SE .75-.99 2820LBS. 10 25 SGHD-CM-100-SE 1.00-1.24 4280LBS. 10 28 SGHD-CM-125-SE 1.25-1.49 4280LBS. 10 30 SGHD-CM-150-SE 1.50-1.99 4280LBS. 10 34 PART NUMBER DIA. RA. APPROX. BREAKING STRENGTH E M SGHD-CM-075-DE .75-.99 2820LBS. 10 25 SGHD-CM-100-DE 1.00-1.24 4280LBS. 10 28 SGHD-CM-125-DE 1.25-1.49 4280LBS. 10 30 SGHD-CM-150-DE 1.50-1.99 4280LBS. 10 34 SGHD-CM-200-DE 2.00-2.49 8050LBS. 10 36 SGHD-CM-250-DE 2.50-2.99 8050LBS. 10 38 SGHD-CM-300-DE 3.00-3.49 10060LBS. 10 40 SGHD-CM-350-DE 3.50-3.99 12070LBS. 10 44 SGHD-CM-400-DE 4.00-4.49 12070LBS. 10 46 PART NUMBER LENGTH E = Eye Length M = Mesh Length at Nominal Diameter (Inches) Support Grip Number Structure Product Type SG = - Support Grips SGHD = Support Grips Heavy Duty (Double Weave) Mesh CM = Closed Mesh LC = Lace Closing RC = Rod Closing - Mesh Diameter Lower Diameter Range of Mesh - Eye Style DE = Double Eye SE = Single Eye OFS = Offset Eye UB = Universal Bale Caution: When selecting a grip, never use to their approximate breaking strength. Refer to Technical Reference section for safety and working load factors. 9 1-800-ERICSON (374-2766) • www.ericson.com Support Grips - Light Duty Service Drops • Ericson Service Drop Grips are used in a wide variety of light duty electrical applications such as service entrance, cable tv, telephone, fiber optics, etc., in sloping, vertical, or horizontal positions. • High grade non-magnetic tin coated bronze wire. STANDARD, SINGLE EYE M E E SD-23-SE SD-32-SE SD-43-SE SD-56-SE SD-73-SE SD-85-SE SD-100-SE .23-.31 .32-.43 .43-.56 .56-.73 .73-.85 .85-1.00 1.00-1.25 PART NUMBER DIA. RA. APPROX. BREAKING STRENGTH E M SD-23-UB SD-32-UB SD-43-UB SD-56-UB SD-73-UB SD-85-UB SD-100-UB .23-.31 .32-.43 .43-.56 .56-.73 .73-.85 .85-1.00 1.00-1.25 290LBS. 290LBS. 380LBS. 600LBS. 790LBS. 1020LBS. 1020LBS. 8 10 12 13 14 14 15 3 4 5 6 6 8 9 PART NUMBER DIA. RA. APPROX. BREAKING STRENGTH E M SDHD-23-SE SDHD-32-SE SDHD-43-SE SDHD-56-SE SDHD-73-SE SDHD-85-SE SDHD-100-SE .23-.31 .32-.43 .43-.56 .56-.73 .73-.85 .85-1.00 1.00-1.25 500LBS. 500LBS. 870LBS. 1050LBS. 1390LBS. 1790LBS. 1790LBS. 5 6 6 7 8 8 9 5 6 8 9 10 12 14 HEAVY DUTY, SINGLE EYE M E HEAVY DUTY, UNIVERSAL BALE M E Bus Drops & Service Drops Number Structure Product Type SD = Service Drops SDHD = Service Drops Heavy Duty (Double Weave) - Mesh Diameter Lower Diameter Range of Mesh LENGTH DIA. RA. STANDARD, UNIVERSAL BALE M APPROX. BREAKING STRENGTH 290LBS. 290LBS. 380LBS. 600LBS. 790LBS. 1020LBS. 1020LBS. PART NUMBER PART NUMBER DIA. RA. SDHD-23-UB SDHD-32-UB SDHD-43-UB SDHD-56-UB SDHD-73-UB SDHD-85-UB SDHD-100-UB .23-.31 .32-.43 .43-.56 .56-.73 .73-.85 .85-1.00 1.00-1.25 - APPROX. BREAKING STRENGTH 500LBS. 500LBS. 870LBS. 1050LBS. 1390LBS. 1790LBS. 1790LBS. E M 4 4 6 7 7 8 9 3 4 5 6 6 8 9 LENGTH LENGTH LENGTH E M 9 10 12 13 14 14 15 5 6 8 9 10 12 14 E = Eye Length M = Mesh Length at Nominal Diameter (Inches) Eye Style SE = Single Eye UB = Universal Bale Caution: When selecting a grip, never use to their approximate breaking strength. Refer to Technical Reference section for safety and working load factors. 1-800-ERICSON (374-2766) • www.ericson.com 10 Support Grips - Conduit Riser Grips • Ericson Conduit Riser Support Grips are used to support cable runs in vertical or sloping standard rigid conduit. • They are designed to prevent cable creep in conduit and help prevent cable pullouts. • Ericson Conduit Riser Support Grips install quickly and easily with no damage to electrical cable. • The mesh is attached to a support ring, which sits on the conduit requiring no extra hardware to attach. • Fittings, bushings, or couplings may be threaded on the conduit with the grip in place. • Stranded tinned bronze wire. SINGLE WEAVE, CLOSED MESH For permanent support when cable end is available to be installed through the grip. CABLE SIZE INCHES .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 LENGTH 8” 9” 10” 11” 12” 13” 14” 17” 18” 20” 21” CONDUIT SIZE APX. BRK. STR. LBS. 530 290 790 435 1030 560 1610 890 1610 890 1610 890 2150 1180 3260 1795 3260 1795 4080 2245 4080 2245 3/4” CAT. NO. CRG-C.75-CM-050 1” CAT. NO. CRG-C1-CM-050 CRG-C1-CM-062 1-1/4” CAT. NO. CRG-C1.25-CM-050 CRG-C1.25-CM-062 CRG-C1.25-CM-075 1-1/2” CAT. NO. CRG-C1.50-CM-050 CRG-C1.50-CM-062 CRG-C1.50-CM-075 2” CAT. NO. CRG-C2-CM-050 CRG-C2-CM-062 CRG-C2-CM-075 CRG-C2-CM-100 2-1/2” CAT. NO. CRG-C2.50-CM-050 CRG-C2.50-CM-062 CRG-C2.50-CM-075 CRG-C2.50-CM-100 CRG-C2.50-CM-125 CRG-C2.50-CM-150 CRG-C2.50-CM-175 3” CAT. NO. CRG-C3-CM-050 CRG-C3-CM-062 CRG-C3-CM-075 CRG-C3-CM-100 CRG-C3-CM-150 CRG-C3-CM-175 CRG-C3-CM-200 3-1/2” CAT. NO. CRG-C3.50-CM-062 CRG-C3.50-CM-075 CRG-C3.50-CM-100 CRG-C3.50-CM-125 CRG-C3.50-CM-150 CRG-C3.50-CM-175 CRG-C3.50-CM-200 CRG-C3.50-CM-250 CRG-C2-CM-125 CRG-C4-CM-062 CRG-C3-CM-125 4” CAT. NO. CRG-C4-CM-075 CRG-C4-CM-100 CRG-C4-CM-150 CRG-C4-CM-175 CRG-C4-CM-200 4-1/2”” CAT. NO. CRG-C4.50-CM-075 CRG-C4.50-CM-100 CRG-C4.50-CM-125 CRG-C4.50-CM-150 CRG-C4.50-CM-175 CRG-C4.50-CM-200 CRG-C4.50-CM-250 CRG-C4.50-CM-300 CRG-C4.50-CM-350 5” CAT. NO. CRG-C5-CM-075 CRG-C5-CM-100 CRG-C5-CM-125 CRG-C5-CM-150 CRG-C5-CM-175 CRG-C5-CM-200 CRG-C5-CM-250 CRG-C5-CM-300 CRG-C5-CM-350 6” CAT. NO. CRG-C6-CM-075 CRG-C6-CM-100 CRG-C6-CM-125 CRG-C6-CM-150 CRG-C6-CM-175 CRG-C6-CM-200 CRG-C6-CM-250 CRG-C6-CM-300 CRG-C6-CM-350 Conduit Riser Grips Number Structure Product Type CRG = Conduit Riser Grips 11 CRG-C1.50-CM-100 - Conduit Size 0.75" thru 6" - CRG-C4-CM-125 Mesh Style CM = Closed Mesh LC = Lace Closing RC = Rod Closing - Mesh Diameter Lower Diameter Range of Mesh 1-800-ERICSON (374-2766) • www.ericson.com CRG-C4-CM-250 CRG-C4-CM-300 Support Grips - Conduit Riser Grips • Stranded tinned bronze wire. DOUBLE WEAVE, SPLIT MESH, LACE CLOSING For permanent support when cable end is not available. CABLE SIZE INCHES .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 LENGTH 10” 11” 12” 13” 14” 17” 18” 20” 21” CONDUIT SIZE APX. BRK. STR. LBS. 1580 870 2040 1125 2040 1125 2040 1125 2730 1500 4300 2365 4300 2365 5380 2955 5380 2955 1-1/4” CAT. NO. CRG-C1.25-LC-075 1-1/2” CAT. NO. CRG-C1.5-LC-075 CRG-C1.5-LC-100 2” CAT. NO. CRG-C2-LC-075 2-1/2” CAT. NO. CRG-C2.5-LC-075 CRG-C2.5-LC-100CRG-C2.5-LC-125CRG-C2.5-LC-150CRG-C2.5-LC-175 3” CAT. NO. CRG-C3-LC-075 3-1/2” CAT. NO. CRG-C3.5-LC-075 CRG-C3.5-LC-100CRG-C3.5-LC-125 CRG-C3.5-LC-150CRG-C3.5-LC-175CRG-C3.5-LC-200CRG-C3.5-LC-250 4” CAT. NO. CRG-C4-LC-075 4-1/2” CAT. NO. CRG-C4.5-LC-075 CRG-C4.5-LC-100CRG-C4.5-LC-125CRG-C4.5-LC-150CRG-C4.5-LC-175CRG-C4.5-LC-200CRG-C4.5-LC-250CRG-C4.5-LC-300CRG-C4.5-LC-350 5” CAT. NO. CRG-C5-LC-075 CRG-C5-LC-100 CRG-C5-LC-125 CRG-C5-LC-150 CRG-C5-LC-175 CRG-C5-LC-200 CRG-C5-LC-250 CRG-C5-LC-300 CRG-C5-LC-350 6” CAT. NO. CRG-C6-LC-075 CRG-C6-LC-100 CRG-C6-LC-125 CRG-C6-LC-150 CRG-C6-LC-175 CRG-C6-LC-200 CRG-C6-LC-250 CRG-C6-LC-300 CRG-C6-LC-350 CRG-C2-LC-100 CRG-C2-LC-125 CRG-C3-LC-100 CRG-C3-LC-125 CRG-C3-LC-150 CRG-C3-LC-175 CRG-C3-LC-200 CRG-C4-LC-100 CRG-C4-LC-125 CRG-C4-LC-150 CRG-C4-LC-175 CRG-C4-LC-200 CRG-C4-LC-250 CRG-C4-LC-300 Conduit Riser Grips Number Structure Product Type CRG = Conduit Riser Grips - Conduit Size 0.75" thru 6" - Mesh Style CM = Closed Mesh LC = Lace Closing RC = Rod Closing - Mesh Diameter Lower Diameter Range of Mesh 1-800-ERICSON (374-2766) • www.ericson.com 12 Support Grips - Conduit Riser Grips • Stranded tinned bronze wire. SINGLE WEAVE, SPLIT MESH, ROD CLOSING For temporary support when cable end is not available. CABLE SIZE INCHES .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99 LENGTH 11” 12” 13” 14” 15” 16” 17” 19” 20 CONDUIT SIZE APX. BRK. STR. LBS. 1020 560 1610 890 1610 890 1610 890 2150 1180 3260 1795 3260 1795 4080 2245 4080 2245 1-1/4” CAT. NO. CRG-C1.25-RC-075 1-1/2” CAT. NO. CRG-C1.5-RC-075 CRG-C1.5-RC-100 2” CAT. NO. CRG-C2-RC-075 2-1/2” CAT. NO. CRG-C2.5-RC-075 CRG-C2.5-RC-100 CRG-C2.5-RC-125 CRG-C2.5-RC-150 CRG-C2.5-RC-175 3” CAT. NO. CRG-C3-RC-075 3-1/2” CAT. NO. CRG-C3.5-RC-075 CRG-C3.5-RC-100 CRG-C3.5-RC-125 CRG-C3.5-RC-150 CRG-C3.5-RC-175 CRG-C3.5-RC-200 CRG-C3.5-RC-250 4” CAT. NO. CRG-C4-RC-075 4-1/2” CAT. NO. CRG-C4.5-RC-075 CRG-C4.5-RC-100 CRG-C4.5-RC-125 CRG-C4.5-RC-150 CRG-C4.5-RC-175 CRG-C4.5-RC-200 CRG-C4.5-RC-250 CRG-C4.5-RC-300 CRG-C4.5-RC-350 5” CAT. NO. CRG-C5-RC-075 CRG-C5-RC-100 CRG-C5-RC-125 CRG-C5-RC-150 CRG-C5-RC-175 CRG-C5-RC-200 CRG-C5-RC-250 CRG-C5-RC-300 CRG-C5-RC-350 6” CAT. NO. CRG-C6-RC-075 CRG-C6-RC-100 CRG-C6-RC-125 CRG-C6-RC-150 CRG-C6-RC-175 CRG-C6-RC-200 CRG-C6-RC-250 CRG-C6-RC-300 CRG-C6-RC-350 CRG-C2-RC-100 CRG-C2-RC-125 CRG-C3-RC-100 CRG-C3-RC-125 CRG-C3-RC-150 CRG-C3-RC-175 CRG-C3-RC-200 CRG-C4-RC-100 CRG-C4-RC-125 CRG-C4-RC-150 CRG-C4-RC-175 CRG-C4-RC-200 CRG-C4-RC-250 CRG-C4-RC-300 Conduit Riser Grips Number Structure Product Type CRG = Conduit Riser Grips 13 - Conduit Size 0.75" thru 6" - Mesh Style CM = Closed Mesh LC = Lace Closing RC = Rod Closing - Mesh Diameter Lower Diameter Range of Mesh 1-800-ERICSON (374-2766) • www.ericson.com Conduit Riser Conduit Rings Select Conduit Ring Dimension from chart to the right. Conduit Rings are cast bronze, zinc plated to resist corrosion. Conduit Ring Dimensions CONDUIT SIZE RING NO. O.D. I.D. S T 3/4” 1” 1-1/4” C-3/4” C-1 C-1-1/4 .94 1.31 1.50 .62 .93 1.03 1.31 .19 .19 .16 1-1/2” 2” 2-1/2” C-1-1/2 C-2 C-2-1/2 1.76 2.23 2.67 1.23 1.55 2.05 1.52 1.97 2.40 .16 .16 .16 3” 3-1/2” 4” C-3 C-3-1/2 C-4 3.20 3.80 4.30 2.55 3.05 3.55 2.97 3.47 3.94 .22 .22 .22 4-1/2” 5” 6” C-4-1/2 C-5 C-6 4.80 5.30 6.30 4.03 4.46 5.36 4.45 4.96 5.96 .22 .22 .25 For Ericson Conduit Riser Grips only use to determine grip size when multiple cables are held in a Single Conduit Riser Grip For Cables Of Equal Diameters • Under "Number of cables in one grip," find diameter of your cable in vertical column. • Read grip size and grip diameter range to the right. • If your diameter is the maximum of the range shown, go to the next larger size for split grips, stay with the same size for closed grips. • Example: 3 cables, each with .85 diameter, for a closed grip select the 1.50 - 1.74 range, for a split grip use 1.75 - 1.99. NUMBER OF EQUAL DIAMETER CABLES IN ONE GRIP 2 3 4 5 6 and7 8 9 GRIP DIAM. RANGE .29-.36 .24-.30 .21-.25 .18-.22 .16-.20 .15-.18 .14-.17 .50-.62 .37-.43 .31-.36 .26-.30 .23-.27 .21-.24 .19-.22 .18-.20 .63-.74 .44-.58 .37-.48 .31-.41 .28-.36 .25-.32 .23-.29 .21-.27 .75-.99 .59-.72 .49-.60 .42-.51 .37-.45 .33-.40 .30-.36 .28-.34 1.00-1.24 .73-.87 .61-.72 .52-.61 .46-.54 .41-.48 .37-.43 .35-.40 1.25-1.49 .88-1.01 .73-.85 .62-.71 .55-.63 .49-.56 .44-.51 .41-.47 1.50-1.74 1.02-1.16 .86-.96 .72-.81 .64-.72 .57-.64 .52-.58 .48-.54 1.75-1.99 1.17-1.44 .97-1.20 .82-1.02 .73-.90 .65-.80 .59-.72 .55-.67 2.00-2.49 1.45-1.73 1.21-1.45 1.03-1.22 .91-1.08 .81-.96 .73-.87 .68-.81 2.50-2.99 1.74-2.02 1.46-1.69 1.23-1.43 1.09-1.26 .97-1.11 .83-1.01 .82-.94 3.00-3.49 2.03-2.31 1.70-1.93 1.44-1.63 1.27-1.44 1.12-1.27 1.02-1.15 .95-1.08 3.50-3.9 1-800-ERICSON (374-2766) • www.ericson.com 14 Support Grips - Bus Drop Grips • High strength galvanized steel strand. • Ericson Bus Drop Grips are easily installed and absorb tension, vibration, and pull with no damage. • They support flexible cord or Bus Drop Cable at bus duct or industrial areas. • Single eye can be used with springs by disassembling draw bar from coil, placing through eye and replacing draw bar. • Hook eyes available, please consult factory. SINGLE EYE, WIDE RANGE LENGTH PART NUMBER DIA. RA. APPROX. BREAKING STRENGTH E* M *BD-022-SE *BD-030-SE *BD-041-SE *BD-053-SE *BD-070-SE *BD-082-SE *BD-096-SE BD-125-SE .22-.32 .30-.43 .41-.56 .53-.73 .70-.85 .82-1.00 .96-1.25 1.25-1.50 350LBS. 450LBS. 550LBS. 1000LBS. 1400LBS. 1400LBS. 1500LBS. 1800LBS. 3 4 6 7 7 8 9 10 3-1/2** 4 4-3/4 6 6-3/4 8 9-1/2 12-1/2** DRY LOCATION ONLY *Except Where Noted UNIVERSAL BALE, WIDE RANGE LENGTH PART NUMBER DIA. RA. APPROX. BREAKING STRENGTH E* M BD-022-UB *BD-030-UB *BD-041-UB *BD-053-UB *BD-070-UB *BD-082-UB *BD-096-UB .22-.32 .30-.43 .41-.56 .53-.73 .70-.85 .82-1.00 .96-1.25 350LBS. 450LBS. 550LBS. 1000LBS. 1400LBS. 1400LBS. 1500LBS. 9 10 12 13 13 14 15 3-1/2** 4 4-3/4 6 6-3/4 8 9-1/2 DRY LOCATION ONLY BUS DROP SAFETY SPRINGS PART NUMBER MAXIMUM DEFLECTION APPROX. BREAKING STRENGTH 40LB SPRING 80LB SPRING 2-1/8 @40 LBS. 3-1/8 @80 LBS. SPRING SPRING LENGTH (NO LOAD) L 600 LBS. 850 LBS. D 8-1/4 8-1/4 E = Eye Length M = Mesh Length at Nominal Diameter (Inches) Bus Drops & Service Drops Number Structure Product Type BD = Bus Drops SD = Service Drops SDHD = Service Drops Heavy Duty (Double Weave) - Mesh Diameter Lower Diameter Range of Mesh - Eye Style * Dim with Bale Fully Extended ** Not UL Listed SE = Single Eye UB = Universal Bale Caution: When selecting a grip, never use to their approximate breaking strength. Refer to Technical Reference section for safety and working load factors. 15 1-800-ERICSON (374-2766) • www.ericson.com Notes 1-800-ERICSON (374-2766) • www.ericson.com 16 Pullling Grips - Light Duty and Utility Grips Flag label shows catalog number, full description containing diameter range, barcode, mfg date, and MADE IN USA! Flexible eyes will mate easily with line stringing swivels and links for attachment to pulling lines. They have great strength for trouble free pulling jobs. When using a Pulling Grip, these shoulder protectors contain the cable inside of the grip and allow for a smooth passage of the grip through conduit bends. All Ericson Pulling Grips utilize galvanized steel mesh strand that provides superior pulling grip strength and flexibility to follow the cable path of the installation. Double weave construction is available for added strength with greater mesh contact on the cable to handler longer or heavier pulling requirements. Closed Mesh weave allows for easy installation onto cable and is designed to be a reusable tool. 17 1-800-ERICSON (374-2766) • www.ericson.com Pulling Grips - Light Duty / Low Tension and Utility Grips How To Select The Correct Pulling Grip Choose a pulling grip style that is best suited for your application. Step 1 Junior Pulling Grips cable diameter range = .25 to 1.25" and Breaking Strength = 450 to 3900 lbs. Light Duty Grips cable diameter range = .50 to 3.99" and Breaking Strength = 2800 to 14700 lbs. Utility Pulling Grips cable diameter range = .50 to 6.99" and Breaking Strength range = 4500 to 48000 lbs. Step 2 Determine your cable outside diameter. Refer to Technical Reference section. Step 3 Find the mesh grip size that encompasses your cable diameter. Step 4 IMPORTANT! Estimate the tension to be put on the grip, establish the working load you require and compare this to the listed approximate breaking strength of the grip to insure that the grip will be strong enough. For Pulling Grips, use a Safety Factor of 5. Refer to Refer to Technical Reference section for safety and working load considerations. 1-800-ERICSON (374-2766) • www.ericson.com 18 Pulling Grips - Light Duty/Low Tension • High grade galvanized steel strand. • They are single weave with a flexible eye for easy attachment to a pulling line. • Ericson Light Duty Pulling Grips are used in general underground electrical construction where pulling tensions are low. SHORT M E STANDARD M E JUNIOR PULLING For attaching to a pulling line, fish tape or snake. M DIA. RA. APPROX. BREAKING STRENGTH E M LDPG-050-S LDPG-062-S LDPG-075-S LDPG-100-S LDPG-125-S LDPG-150-S LDPG-175-S LDPG-200-S LDPG-250-S LDPG-300-S .50-.61 .62-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74 1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 2800LBS. 2800LBS. 4000LBS. 5300LBS. 5300LBS. 6800LBS. 8500LBS. 8500LBS. 10600LBS. 14700LBS. 5 5 6 7 7 8 8 9 9 10 11 11 12 13 14 15 17 18 18 20 PART NUMBER DIA. RA. LDPG-050 LDPG-062 LDPG-075 LDPG-100 LDPG-125 LDPG-150 LDPG-200 LDPG-250 LDPG-300 LDPG-350 .50-.61 .62-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.99 2.00-2.49 2.50-2.99 3.00-3.50 3.50-3.99 PART NUMBER DIA. RA. JPG-25 JPG-37 JPG-50 JPG-62 JPG-75 JPG-100 JPG-KIT INCLUDES: E LENGTH PART NUMBER .25-.36 .37-.49 .50-.61 .62-.74 .75-.99 1.00-1.25 .25-1.25 JPG-25, JPG-37 JPG-50, JPG-62 JPG-75, JPG-100 APPROX. BREAKING STRENGTH 2800LBS. 2800LBS. 4000LBS. 6800LBS. 6800LBS. 6800LBS. 8500LBS. 10600LBS. 14700LBS. 14700LBS. LENGTH E M 5 5 6 7 7 8 9 9 10 10 16 16 20 20 21 23 25 27 30 32 LENGTH APPROX. BREAKING STRENGTH E M 450 LBS. 900 LBS. 1300 LBS. 1950 LBS. 2800 LBS. 3900 LBS. 3-1/4 3-1/4 4-1/4 5 5-3/4 6-1/2 4-1/4 7 8-1/2 10 10 11-1/2 E = Eye Length M = Mesh Length at Nominal Diameter (Inches) Pulling Grips Number Structure Product Type LDPG = Light Duty Pulling Grips JPG = Junior Pulling Grips UPG = Utility Pulling Grips - Mesh Diameter Lower Diameter Range of Mesh - Eye Style FE = Flexible Eye S = Short Caution: When selecting a grip, never use to their approximate breaking strength. Refer to Technical Reference section for safety and working load factors. 19 1-800-ERICSON (374-2766) • www.ericson.com Pulling Grips - Utility Pulling Grips • High strength galvanized steel strand. • Pulling Grips are double weave for added strength with greater mesh contact on the cable to handle longer or heavier pulling jobs. Standard, Flexible Eye LENGTH DIA. RA. APPROX. BREAKING STRENGTH E M UPG-50-FE .50-.61 4500LBS. 5 16 UPG-62-FE .62-.74 5600LBS. 5 16 UPG-75-FE .75-.99 6800LBS. 6 32 UPG-100-FE 1.00-1.49 9600LBS. 7 33 UPG-150-FE 1.50-1.99 16400LBS. 7 34 UPG-200-FE 2.00-2.49 18500LBS. 9 36 UPG-250-FE 2.50-2.99 24500LBS. 10 38 UPG-300-FE 3.00-3.49 24500LBS. 10 39 UPG-350-FE 3.50-3.99 31000LBS. 10 41 PART NUMBER For shorter or longer mesh please consult factory. Pulling Grips Number Structure Product Type LDPG = Light Duty Pulling Grips JPG = Junior Pulling Grips UPG = Utility Pulling Grips - Mesh Diameter Lower Diameter Range of Mesh - Eye Style FE = Flexible Eye S = Short Caution: When selecting a grip, never use to their approximate breaking strength. Refer to Technical Reference section for safety and working load factors. 1-800-ERICSON (374-2766) • www.ericson.com 20 Notes 21 1-800-ERICSON (374-2766) • www.ericson.com Strain Relief Grips - Wide Range Grips, Cord Grips, Deluxe Cord Grips, I-Grips Wide Range Grips Cord Grips Deluxe Cord Grips I - Grips Ericson's Strain Relief Grip and Mesh eliminates cable pullout to reduce a loss of service resulting in costly downtime. The endless mesh weave provides easy cable installation that is woven with stainless steel providing corrosion resistance for all applications. A NPT and PG threaded body allows for easy attachment to either a threaded hub or knock-out in box. 1-800-ERICSON (374-2766) • www.ericson.com 22 How to select a Strain Relief Grip Step 1 Refer to chart below to determine which Strain Relief Grip style is best suited for your application. Step 2 Determine outside diameter of cable. Step 3 Is the application environment indoors or outdoors? Step 4 Select N.P.T. size and fitting style. Strain Relief Grip Style Wide Range Grip Deluxe Cord Grip Cord Grips I - Grips 23 Application Features Indoor use only for wiring of electrical enclosures, portable power tools, bus drop cable systems, etc Aluminum Body Stainless Steel Mesh Grip Range = .25 to 2.45" Outdoors or indoors rated where item are subjected to moisture or splash. Examples are hand tools, pendant drops for cranes and hoists, or pumps and processing equipment. Aluminum Nut Aluminum Body Neoprene Bushing Stainless Steel Mesh with Aluminum Collars Grip Range = .18 to 3.25" Outdoors or indoors rated where items are subjected to moisture or splash Aluminum Nut Aluminum Body Neoprene Bushing Provides additional strain relief for Plugs and Connectors while controlling the cable arc of bend. For indoor use only. High Strength Galvanized Strand Grip Range = .30 to 1.25" 1-800-ERICSON (374-2766) • www.ericson.com Strain Relief Grips - Wide Range • Ericson Strain Relief Grips are wide range mesh construction with single weave, galvanized steel mesh. • The one piece design is easy to install. • Ericson Strain Relief Grips are used to connect flexible cord or bus drop cable to electrical enclosures, also prevents cord or cable pullout. • Insulating bushing available for non-insulated aluminum fittings. • Available with locknut and pvc gasket for a dirt and dust free seal. • Dry locations only. SR SERIES Non-Insulated Wide Range Strain Relief PART NUMBER DIA. RA. THREAD SIZE NPT (INCHES) LENGTH @ NOM DIA. (IN.) SR-022 .24-.32 1/2 3-1/4 SR-030 .32-.43 1/2 3-3/4 SR-040 .43-.54 1/2 4-3/4 SR-052 .54-.73 3/4 6-1/2 SR-070 .73-.97 1 7 SR-094 .97-1.25 1-1/4 9 DRY LOCATION ONLY SRP SERIES Insulated Wide Range Strain Relief with Insulating Bushing Strain Relief Number Structure Product Type SR = Strain Relief SRI = Strain Relief Insulated - PART NUMBER DIA. RA. THREAD SIZE NPT (INCHES) LENGTH @ NOM DIA. (IN.) DIM. A (INCHES) SRI-022 .24-.32 1/2 N.P.S. 3-1/4 1 SRI-030 .32-.43 1/2 N.P.S. 3-3/4 1 SRI-040 .43-.54 1/2 N.P.S. 4-3/4 1 SRI-052 .54-.73 3/4 N.P.S. 6-1/2 1 SRI-070 .73-.97 1 N.P.S. 7 1-3/16 SRI-094 .97-1.25 1-1/4 N.P.S. 9 1-3/16 SRI-120 1.25-1.50 1-1/2 N.P.T. 11-3/4 1-3/16 SRI-140 1.50-1.70 2 N.P.T. 13-1/4 1-3/8 SRI-162 1.70-2.00 2-1/2 N.P.T. 13-1/2 1-1/2 SRI-200 2.00-2.45 2-1/2 N.P.T. 13-3/4 1-1/2 DRY LOCATION ONLY Mesh Diameter Lower Diameter Range of Mesh 1-800-ERICSON (374-2766) • www.ericson.com 24 Strain Relief Grips - Cord and Deluxe Cord Grips Features Cord Grip DeluxeCord Grip Features • Indoor and outdoor use • Prevents cord pull-out • For use where cable is exposed to moisture or submersion • Eliminates fatigue points • Control cable arc-of-bend Cord Grip Materials • Aluminum Nut • Aluminum Body • Neoprene Bushing Deluxe Cord Grip Materials • Aluminum Nut • Aluminum Body • Neoprene Bushing • SST Mesh with aluminum collars 25 Applications • Wiring Enclosures • Pumps • Compressors • Construction • Hand Tools • Processing Equipment • Material Handling Equipment • Motors & Machine Tools COMPLIANCES: National Electrical Code Articles 400-10 and 400-14 NEMA standars FB1-1983 Fed. Spec. W-C-586c Mil Spec 100 and 130 1-800-ERICSON (374-2766) • www.ericson.com Available upon request • Metal Clad Sealing “O” Ring • Locknut Suitable for use in hazardous locations under NEC Sec 501-4(b), 502-4(a)(2), and 503-2(a). For Class 1, Div 2; Class II, Div 1 and 2; and Class III, Div 1 and 2. Strain Relief Grips - Cord Grips MACHINED ALUMINUM NPT HUB SIZE STRAIGHT CORD CONNECTORS Machined Aluminum 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” DIAMETER RANGE INCHES .062-.125 .125-.187 .187-.250 .250-.312 FORM SIZE CATALOG NUMBER CG-12-F1-3/8 CG-18-F1-3/8 F1 CG-25-F1-3/8 CG-3I-F1-3/8 .312 · .375 CG-37-F1-3/8 .375-.437 CG-43-F1-3 8 062-.125 CG-12-F2 .125-.187 CG-18-F2 .187-.250 .250-.375 F2 CG-25-F2 CG-37-F2 .312-.437 CG-43-F2 .375-.500 CG-5C-F2 .375-.500 CG-50-F3 .500-.625 .625-150 F3 CG-62-F3 CG-75-F3 150-.875 CG-87-F3 .375-.500 CG-50-F4 .500-.625 CG-62-F4 .625-.750 .750-.875 F4 CG-75-F4 CG-87-F4 .875-1.00 CG-100-F4 1.00- 1.12 CG-112-F4 .750-.875 CG-87-F5 .875-1.00 CG-100-F5 1.00-1.125 F5 1.125-1.250 F5 CG-112-F5 CG-125-F5 1.250-1.375 CG-137-F5 1.375-1.437 CG-143-F5 .750-.875 CG-87-F6 .875-1.00 CG-100-F6 1.00-1.125 1.125-1.25 F6 CG-112-F6 CG-125-F6 1.25-1.375 CG-137-F6 1.375-1.437 CG -143-F6 1-800-ERICSON (374-2766) • www.ericson.com 26 Strain Relief Grips - Cord Grips STRAIGHT CORD CONNECTORS CASTINGS Cast Aluminum ALUMINUM 2” -3” NPT NPT HUB SIZE 2” 2 1/2” 3” 27 DIAMETER RANGE INCHES .250-1.375 1.375-1.500 1.500-1.625 1.625-1750 1.750-1.875 1.875-1.937 1.937-2.000 1.688-1.812 1.812-1.937 1.937-2.062 2062-2188 2.188-2.312 2.312-2.437 2.437-2.625 2.625-2.812 2.812-3.000 3.000-3.250 FORM SIZE F7 F8 F9 1-800-ERICSON (374-2766) • www.ericson.com CATALOG NUMBER CG-137-F7 CG-150-F7 CG-162-F7 CG-175-F7 CG-187-F7 CG-197-F7 CG-200-F7 CG-181-F8 CG-193-F8 CG-206-F8 CG-218-F8 CG-231-F8 CG-243-F8 CG-262-F9 CG-281-F9 CG-300-F9 CG3-325-F9 Strain Relief Grips - Cord Grips 90Ëš MALE CORD CONNECTORS MACHINED ALUMINUM NPT HUB SIZE DIAMETER RANGE INCHES NCG-12-F1 .125-.187 NCG-18-F1 .250-.312 F1 NCG-37-F1 NCG-43-F1 .062-.125 NCG-12-F2 .125-.187 NCG-18-F2 NCG-25-F2 F2 NCG-43F-2 .375-.500 NCG-50-F2* .500-.625 NCG-62-F2* .375-.500 NCG-50-F3 .625-.750 F3 .750-.875 .375-.500 .500-.625 .625-.750 .750-.875 1 1/4” 1 1/2” NCG-62-F3 NCG-75-F3* NCG-87-F3* NCG-50-F4 NCG-62-F4 F4 NCG-75-F4 NCG-87-F4 .875-1.000 NCG-100-F4* 1.00-1.125 NCG-112-F4* .750-.875 NCG-87-F5 .875-1.000 NCG-100-F5 1000-1.125 1.125-1.250 F5 NCG-112-F5 NCG-125-F5* 1.250-1.375 NCG-137-F5* 1.375-1.437 NCG-143-F5* .750-.875 NCG-87-F6 .875-1.000 NCG-100-F6 1.000-1.125 1.125-1.250 F6 NCG-112-F6 NCG-125-F6 1.250-1.375 NCG-137-F6 1.375-1.437 NCG-143-F6 1.250-1.375 NCG-137-F7 1.375-1.500 NCG-150-F7 1.500-1.625 2” NCG-37-F2 .312-.437 .500-.625 1” NCG-31-F1 .375-.437 .250-.375 3/4” NCG-25-F1 .312-.375 .187-.250 1/2” CATALOG NUMBER .062-.125 .187-.250 3/8” FORM SIZE 1.625-1150 NCG-162-F7 F7 1.750-1.875 NCG-175-F7 NCG-187-F7 1.875-1937 NCG-193-F7 1.937-2.000 NCG-200-F7* *Cable jacket may have to be stripped to pass through connector. 1-800-ERICSON (374-2766) • www.ericson.com 28 Strain Relief Grips - Deluxe Cord Grips • Ericson Deluxe Cord Grips are used whenever cable or cord must withstand extreme applications and environmental conditions. • Widely used with switch boxes, power duct cut-outs, drop stations, power hand tools, moving parts of machinery, pumps, compressors, and bus drop installations. • Endless weave provides smooth cable-hugging ends for construction free installation. THREAD SIZE N.P.T. 3/8” 1/2” 3/4” 1” 1-1/4” 29 GRIP DIAM. RANGE INCHES MALE THREAD DESCRIPTION 90Ëš MALE THREAD DESCRIPTION 45Ëš MALE THREAD DESCRIPTION FEMALE THREAD DESCRIPTION .18-.25 DCG-25-F1 DCG-25-F1-90 DCG-25-F1-45 DCG-25-F1-F .25-.37 DCG-37-F1 DCG-37-F1-90 DCG-37-F1-45 DCG-37-F1-F .37-.43 DCG-43-F1 DCG-43-F1-90 DCG-43-F1-45 DCG-43-F1-F .18-.25 DCG-25-F2 DCG-25-F2-90 DCG-25-F2-45 DCG-25-F2-F .25-.37 DCG-37-F2 DCG-37-F2-90 DCG-37-F2-45 DCG-37-F2-F .31-.43 DCG-43-F2 DCG-43-F2-90 DCG-43-F2-45 DCG-43-F2-F .37-.50 DCG-50-F2 DCG-50-F2-90 DCG-50-F2-45 DCG-50-F2-F .50-.62 DCG-62-F2 DCG-62-F2-90 DCG-62-F2-45 DCG-62-F2-F .18-.25 DCG-25-F3 DCG-25-F3-90 DCG-25-F2-45 DCG-25-F3-F .25-.37 DCG-37-F3 DCG-37-F3-90 DCG-37-F2-45 DCG-37-F3-F .37-.50 DCG-50-F3 DCG-50-F3-90 DCG-50-F2-45 DCG-50-F3-F .50-.62 DCG-62-F3 DCG-62-F3-90 DCG-62-F2-45 DCG-62-F3-F .62-.75 DCG-75-F3 DCG-75-F3-90 DCG-75-F2-45 DCG-75-F3-F .37-.50 DCG-50-F4 DCG-50-F4-90 DCG-50-F2-45 DCG-50-F4-F .50-.62 DCG-62-F4 DCG-62-F4-90 DCG-62-F2-45 DCG-62-F4-F .62-.75 DCG-75-F4 DCG-75-F4-90 DCG-75-F2-45 DCG-75-F4-F .75-.87 DCG-87-F4 DCG-87-F4-90 DCG-87-F4-45 DCG-87-F4-F .87-1.00 DCG-100-F4 DCG-100-F4-90 DCG-100-F4-45 DCG-100-F4-F .75-.87 DCG-87-F5 DCG-87-F5-90 DCG-87-F5-45 DCG-87-F5-F .87-1.00 DCG-100-F5 DCG-100-F5-90 DCG-100-F5-45 DCG-100-F5-F 1.00-1.125 DCG-112-F5 DCG-112-F5-90 DCG-112-F5-45 DCG-112-F5-F 1.12-1.25 DCG-125-F5 DCG-125-F5-90 DCG-125-F5-45 DCG-125-F5-F 1.25-1.37 DCG-137-F5 DCG-137-F5-90 DCG-137-F5-90 DCG-137-F5-F 1-800-ERICSON (374-2766) • www.ericson.com Strain Relief Grips - Deluxe Cord Grips THREAD SIZE N.P.T. 1 1/2” 2” 2 1/2” 3” GRIP DIAM. RANGE INCHES MALE THREAD DESCRIPTION 90Ëš MALE THREAD DESCRIPTION 45Ëš MALE THREAD DESCRIPTION FEMALE THREAD DESCRIPTION .75-.87 DCG-87-F6 DCG-87-F6-90 DCG-87-F6-45 DCG-87-F6-F .87-1.00 DCG-100-F6 DCG-100-F6-90 DCG-100-F6-45 DCG-100-F6-F 1.00-1.125 DCG-112-F6 DCG-112-F6-90 DCG-112-F6-45 DCG-112-F6-F 1.125-1.25 DCG-125-F6 DCG-125-F6-90 DCG-125-F6-45 DCG-125-F6-F 1.20-1.375 DCG-137-F7 DCG-137-F7-90 1.375-1.500 DCG-150-F7 DCG-150-F7-90 1.500-1.625 DCG-162-F7 DCG-162-F7-90 1.625-1.750 DCG-175-F7 DCG-175-F7-90 1.750-1.875 DCG-187-F7 DCG-187-F7-90 1.875-1.937 DCG-193-F7 DCG-193-F7-90 1.937-2.000 DCG-200-F7 DCG-200-F7-90 1.687-1.812 DCG-181-F8 1.812-1.937 DCG-193-F8 1.937-2.062 DCG-206-F8 2.062-2.187 DCG-218-F8 2.187-2.312 DCG-231-F8 2.312-2.437 DCG-243-F8 2.437-2.625 DCG-262-F9 2.625-2.812 DCG-281-F9 2.812-3.000 DCG-300-F9 3.000-3.250 DCG-325-F9 1-800-ERICSON (374-2766) • www.ericson.com 30 Strain Relief Grips - I-Grips • Ericson - Grips are easy to attach, will control cable-arc-of bend, and provide heavy duty strain relief for plugs and connectors used on portable equipment where abnormal high strain abuse occurs. • Ericson- Grips are made of high strength galvanized steel strand and are recommended for indoor use only. I - GRIPS GALVANIZED M E PART NUMBER CABLE DIAMETER RANGE INCHES E M I-030 I-040 I-052 I-070 I-082 I-094 .30-.43 .40-.56 .52-.73 .70-.85 .82-1.00 .94-1.25 1.25 1.25 1.50 1.50 1.50 1.50 4 4-3/4 6 6-1/2 8 10 PART NUMBER CABLE DIAMETER RANGE INCHES E M I-030-NC I-040-NC I-052-NC I-070-NC I-082-NC I-094-NC .30-.43 .40-.56 .52-.73 .70-.85 .82-1.00 .94-1.25 1.25 1.25 1.50 1.50 1.50 1.50 4 4-3/4 6 6-1/2 8 10 I - GRIPS NYLON COATED M E E = Eye Length M = Mesh Length at Nominal Diameter (Inches) 31 1-800-ERICSON (374-2766) • www.ericson.com Notes 1-800-ERICSON (374-2766) • www.ericson.com 32 Technical Reference - Working Load and Safety Factor Considerations The Grips in the catalog have listed approximate Breaking Strength. The approximate breaking strength of an Ericson grip represents an average calculation based on test factors, which have been determined from data established from actual testing performed in our engineering laboratories. The actual testing is performed with new Grips on metal rods, subject to straight longitudinal tensile loads applied at a uniform rate. Normal manufacturing and test factors can produce a variation + or - 20% in the approximate breaking strength values listed. The broad application of Ericson Grips on a wide variety of objects require that adequate safety factors be used to establish a safe working load. The ratio of the listed approximate breaking strength to the normal working load is the safety factor. As an example, a safety factor of ten (10) would then mean the working load is established by dividing the catalog listed approximate breaking strength by ten (10), or it can be stated that the working load is 1/10 of the catalog listed approximate breaking strength. To determine the recommended working load safety factor for cable grips, divide the approximate breaking strength by 5 for Pulling Grips and 10 for Support Grips. Example: For Pulling Grips, 30,000 / 5 Safety Factor = 6000 lbs which is the workload factor. Example: For Support Grips, 11,000 / 10 Safety Factor = 1100 lbs which is the workload factor. It is impossible to set a safety factor suitable for all cases as operating conditions are never the same. The load, the speed, the acceleration, the diameter, number of objects gripped, surface of object being gripped, and the attachments used - all of these should be considered, together with the effects of abrasion, corrosion, prior use, or abuse, etc. The user-engineer must consider all the variables of his/her specific application, as well as possible accident consequences, before selecting the safety factor to be applied. Where the conditions of the application are not well defined or where risk of personnel or property damage is high, a greater safety factor should be utilized. Any warranty as to quality, performance or fitness for use of Grips is always premised on the condition that the published approximate breaking strengths apply only to new, unused grips and that such products are properly stored, handled, used, maintained, and properly inspected from time to time during the period of use. The factory should be consulted for specific application recommendations where approximate breaking strength and holding power are critical. 33 1-800-ERICSON (374-2766) • www.ericson.com Technical Reference - Lace & Rod Closing Instructions • Single weave Grips should be laced with single strand lacing; double weave with double strand. • Lacing strands should be the same material as the Grip. 1 2 Start the lacing at the lead or anchoring end of all the Grip. Thread the lacings through the first loops of the split and pull through until the lacings are centered at this point. Lace as you would your shoe, crossing the lacings before lacing the next two loops. Don’t pull lacing too tight. leave a space between adjoining loops approximately equal to the width of one diamond of the mesh. 3 4 Twist the lacing strands Wrap the ends of the lacings tightly together at the tail end once or twice tightly around of the Grip. the tail of the Grip, twisting the ends together securely. Excess lace can be cut off. Split Grips, closed with a rod, eliminate the time and guesswork of on-the-job lacing. The stainless steel rod is a precise built-in feature which makes threading easy and fast. The strands of the mesh pass around the rod and match up with the strands from the opposite direction. The rod does not touch the cable at any point and therefore cannot cut the cable. Rod Closing Grips are salvageable; may be removed and reused as many times as desired. FAST TO INSTALL Wrap the Grip around the cable and thread the rod through the preformed loops with a corkscrew motion, us-ing the curved end of the rod to engage the loops. The action required is a steady push and twist simultaneously. The fingers of the left hand are used to bring the loops together just ahead of the hook on the end of the rod. To remove, simply pull the rod out. 1 2 1-800-ERICSON (374-2766) • www.ericson.com 3 34 Technical Reference - Selecting a Grip Size Selecting Proper Sized Pulling and Support Grips How To Select Proper Grip Size For One Or More Cables Of EQUAL Diameter D o Example: For four cables bundled together, each with a diameter of 0.30”: Step 1 Locate “4 Cables” column Step 2 Read down column to range (0.28" - .031") Step 3 Read across line to Grip Diameter Range (.062” - .075”) Grip size is based on the outside diameter or circumference of the cable(s). Use Selection Table 1 to determine the Grip Diameter Range for one or more cables of equal diameter. Grip Selection Table for One or More Cables of Equal Diameter 1) Read across top line for number of cables in one grip 2) Read down for diameter of each cable 3) Read across line to Grip Diameter Range column 1 Cable 0.25–0.37 1/4–3/8 0.37–0.50 3/8–1/2 0.50–0.62 1/2–5/8 0.62–0.75 5/8–3/4 0.75–1.00 3/4–1 1.00–1.25 1–1 1/4 1.25–1.50 1 1/4–1 1/2 1.50–1.75 1 1/2–1 3/4 1.75–2.00 1 3/4–2 2.00–2.50 2–2 1/2 2.50–3.00 2 1/2–3 3.00–3.50 3–3 1/2 3.50–4.00 3 1/2–4 35 Table 1: Decimal and Fractional Inch Cable Diameters — for One or More Cables of Equal Diameter 2 Cables 0.16–0.25 1/64–1/4 0.25–0.36 1/4–23/64 0.27–0.36 17/64–23/64 0.36–0.45 23/64–29/64 0.45–0.60 29/64–39/64 0.60–0.76 39/64–49/64 0.76–0.91 49/64–29/32 0.91–1.08 29/32–1 5/64 1.08–1.23 1 5/64–1 5/64 1.23–1.54 1 5/64–1 35/64 1.54–1.84 1 35/64–1 27/32 1.84–2.15 1 27/32–2 5/32 2.15–2.45 2 5/32–2 29/64 3 Cables 0.15–0.22 0.22–0.33 0.26–0.33 0.33–0.36 0.36–0.49 0.49–0.63 0.63–0.76 0.76–0.89 0.89–1.02 1.02–1.28 1.28–1.53 1.53–1.79 1.79–2.05 5/32–7/32 7/32–21/64 17/64–21/64 21/64–23/64 23/64–31/64 31/64–5/8 5/8–49/64 49/64–57/64 57/64–1 1/64 1 1/64–1 9/32 1 9/32–1 17/32 1 17/32–1 51/64 1 51/64–2 3/64 4 Cables 3 0.12–0.20 1/8–13/64 0.20–0.28 13/64–9/32 0.24–0.28 15/64–9/32 0.28–0.31 9/32–5/16 0.31–0.42 5/16–27/64 0.42–0.54 27/64–35/64 0.54–0.65 35/64–21/32 0.65–0.77 21/32–49/64 0.77–0.88 49/64–7/8 0.88–1.00 7/8–1 1.10–1.32 1 3/32–1 21/64 1.32–1.54 1 21/64–1 35/64 1.54–1.76 1 35/64–1 49/64 1-800-ERICSON (374-2766) • www.ericson.com Grip Diameter Range .250–.375 .375–0.50 0.50–0.75 3 0.62–0.75 4 0.75–1.00 1.00–1.25 1.25–1.50 1.50–1.75 1.75–2.00 2.00–2.50 2.50–3.00 – 3.00–3.50 3.50–4.00 2 Multiple Cable Selection Charts for Cables of Unequal Diameters Technical Reference - Selecting a Grip Size How to choose the correct grip size: 3 1 Selecting Proper Sized Pulling and Support Grips 4 1 ) Find the Grip Circumference Range by measuring the circumference of the bundle of different diameter cables to be gripped (see illustration). 2 ) Divide the bundle circumference by 3.14 to determine the diameter. 3 ) Choose a grip offering a range of cable diameters the same as the cable diameter. How To Select Proper Grip Size For Cables Of UNEQUAL Diameters Step 1 Find the Grip Circumference Range by measuring the circumference of the bundle of different diameter cables to be gripped (see Illustration). Step 2 Divide the bundle of circumference by 3.14 to determine the diameter. Step 3 Choose a grip offering a range of cable diameters the same as the cable diameter. Table 1: Decimal and Fractional Inch Cable Diameters — for One or More Cables of Equal Diameter 5 Cables 0.11–0.14 0.14–0.25 0.21–0.25 7/64–9/64 0.10–0.11 7/32–1/4 0.19–0.22 19/64–3/8 0.26–0.34 17/64–11/32 0.43–0.52 7/16–33/64 9/64–1/4 0.25–0.29 1/4–19/64 0.38–0.48 3/8–31/64 0.29–0.38 0.48–0.58 31/64–37/64 0.67–0.77 43/64–49/64 0.58–0.67 0.77–0.96 0.96–1.16 1.16–1.35 6 & 7 Cables 37/64–43/64 49/64–31/32 31/32–1 5/32 0.11–0.25 0.22–0.26 0.34–0.43 3/32–7/64 0.09–0.10 3/16–7/32 0.17–0.20 7/64–1/4 7/32–17/64 11/32–7/16 0.52–0.60 33/64–39/64 0.69–0.86 11/16–55/64 0.60–0.69 0.86–1.03 1 5/32–1 23/64 1.03–1.20 1.35–1.54 1 23/64–1 35/64 1.20–1.37 8 Cables 39/64–11/16 55/64–1 1/32 1 1/32–1 13/64 1 13/64–1 3/8 0.10–0.20 3/32–7/64 0.06–0.09 1/16–3/32 11/64–13/64 0.15–0.19 5/32–3/16 7/64–13/64 0.20–0.23 13/64–15/64 0.31–0.39 5/16–25/64 0.23–0.31 15/64–5/16 0.39–0.46 25/64–15/32 0.54–0.62 35/64–5/8 0.46–0.54 0.62–0.77 0.77–0.93 0.93–1.08 1.08–1.24 9 Cables 15/32–35/64 5/8–49/64 49/64–15/16 15/16–1 5/64 1 5/64–1 15/64 0.09–0.19 3/32–3/16 0.19–0.22 0.22–0.31 0.29–0.36 0.36–0.43 0.43–0.49 3/16–7/32 7/32–5/16 19/64–23/64 23/64–7/16 7/16–31/64 0.49–0.57 31/64–37/64 0.72–0.86 23/32–55/64 0.57–0.72 0.86–1.00 37/64–23/32 1.00–1.14 1-800-ERICSON (374-2766) • www.ericson.com 55/64–1 1–1 9/64 Grip Diameter Range .250–.375 .375–0.50 0.50–0.75 0.62–0.75 0.75–1.00 1.00–1.25 1.25–1.50 1.50–1.75 1.75–2.00 2.00–2.50 2.50–3.00 3.00–3.50 3.50–4.00 36 Notes 37 1-800-ERICSON (374-2766) • www.ericson.com Cross Reference Cable Range Ericson Part # SUPPORT GRIP - DOUBLE EYE, CLOSED MESH .50 - .62 SG-CM-050-DE .63 - .74 SG-CM-062-DE .75 - .99 SG-CM-075-DE 1.00 - 1.24 SG-CM-100-DE 1.25 - 1.49 SG-CM-125-DE 1.50 - 1.74 SG-CM-150-DE 1.75 - 1.99 SG-CM-175-DE 2.00 - 2.49 SG-CM-200-DE 2.50 - 2.99 SG-CM-250-DE 3.00 - 3.49 SG-CM-300-DE 3.50 - 3.99 SG-CM-350-DE Woodhead Cooper Wiring Hubbell/Kellems P&S 35001 35002 35003 35004 35005 35006 35007 35008 35009 35010 35011 SGD50 SGD63 SGD75 SGD100 SGD125 SGD150 SGD175 SGD-200 SGD-250 SGD300 SGD350 022-01-001 022-01-002 022-01-003 022-01-005 022-01-006 022-01-007 022-01-008 022-01-009 022-01-010 022-01-011 022-01-012 FC050-UU FC062-UU FC075-UU FC100-UU FC125-UU FC150-UU FC175-UU FC200-UU FC250-UU FC300-UU FC350-UU .50 - .62 .63 - .74 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 3.50 - 3.99 SG-CM-050-SE SG-CM-062-SE SG-CM-075-SE SG-CM-100-SE SG-CM-125-SE SG-CM-150-SE SG-CM-175-SE SG-CM-200-SE SG-CM-250-SE SG-CM-300-SE SG-CM-350-SE 35030 35031 35032 35033 35034 35035 35036 35037 35038 35039 35040 SGS50 SGS63 SGS75 SGS100 SGS125 SGS150 SGS175 SGS200 SGS250 SGS300 SGS350 022-01-013 022-01-014 022-01-015 022-01-017 022-01-018 022-01-019 022-01-020 022-01-021 022-01-022 022-01-023 022-01-024 FC050-U FC062-U FC075-U FC100-U FC125-U FC150-U FC175-U FC200-U FC250-U FC300-U FC350-U .50 - .62 .63 - .74 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 3.50 - 3.99 SG-CM-050-OFS SG-CM-062-OFS SG-CM-075-OFS SG-CM-100-OFS SG-CM-125-OFS SG-CM-150-OFS SG-CM-175-OFS SG-CM-200-OFS SG-CM-250-OFS SG-CM-300-OFS SG-CM-350-OFS 35060 35061 35062 35063 35064 35065 35066 35067 35068 35069 35070 SG050 SGO63 SGO75 SGO100 SGO125 SGO150 SGO175 SGO200 SGO250 SGO300 SGO350 022-01-037 022-01-038 022-01-039 022-01-041 022-01-042 022-01-043 022-01-044 022-01-045 022-01-046 022-01-047 022-01-048 FC050-OF FC062-OF FC075-OF FC100-OF FC125-OF FC150-OF FC175-OF FC200-OF FC250-OF FC300-OF FC350-OF 35090 35091 35092 35093 35094 35095 35096 35097 35098 35099 35100 SGU50 SGU63 SGU75 SGU100 SGU125 SGU150 SGU175 SGU200 SGU250 SGU300 SGU350 022-01-051 022-01-052 022-01-053 022-01-050 022-01-054 022-01-055 022-01-056 022-01-057 022-01-058 022-01-059 022-01-060 FC050-LB FC062-LB FC075-LB FC100-LB FC125-LB FC150-LB FC175-LB FC200-LB FC250-LB FC300-LB FC350-LB 35135 35136 35137 35138 35139 35140 35141 35142 35143 35144 35145 SGDL50 SGDL63 SGDL75 SGDL100 SGDL125 SGDL150 SGDL175 SGDL200 SGDL250 SGDL300 SGDL350 022-02-001 022-02-002 022-02-003 022-02-005 022-02-006 022-02-007 022-02-008 022-02-009 022-02-010 022-02-011 022-02-012 FS050-UU FS062-UU FS075-UU FS100-UU FS125-UU FS150-UU FS175-UU FS200-UU FS250-UU FS300-UU FS350-UU 35165 35166 35167 35168 35169 35170 35171 35172 35173 35174 35175 SGSL50 SGSL63 SGSL75 SGSL100 SGSL125 SGSL150 SGSL175 SGSL200 SGSL250 SGSL300 SGSL350 022-02-013 022-02-014 022-02-015 022-02-017 022-02-018 022-02-019 022-02-020 022-02-021 022-02-022 022-02-023 022-02-024 FS050-U FS062-U FS075-U FS100-U FS125-U FS150-U FS175-U FS200-U FS250-U FS300-U FS350-U .50 - .62 SG-CM-050-UB .63 - .74 SG-CM-062-UB .75 - .99 SG-CM-075-UB 1.00 - 1.24 SG-CM-100-UB 1.25 - 1.49 SG-CM-125-UB 1.50 - 1.74 SG-CM-150-UB 1.75 - 1.99 SG-CM-175-UB 2.00 - 2.49 SG-CM-200-UB 2.50 - 2.99 SG-CM-250-UB 3.00 - 3.49 SG-CM-300-UB 3.50 - 3.99 SG-CM-350-UB SUPPORT GRIP - DOUBLE EYE, LACE CLOSING .50 - .62 SG-LC-050-DE .63 - .74 SG-LC-062-DE .75 - .99 SG-LC-075-DE 1.00 - 1.24 SG-LC-100-DE 1.25 - 1.49 SG-LC-125-DE 1.50 - 1.74 SG-LC-150-DE 1.75 - 1.99 SG-LC-175-DE 2.00 - 2.49 SG-LC-200-DE 2.50 - 2.99 SG-LC-250-DE 3.00 - 3.49 SG-LC-300-DE 3.50 - 3.99 SG-LC-350-DE .50 - .62 .63 - .74 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 3.50 - 3.99 SG-LC-050-SE SG-LC-062-SE SG-LC-075-SE SG-LC-100-SE SG-LC-125-SE SG-LC-150-SE SG-LC-175-SE SG-LC-200-SE SG-LC-250-SE SG-LC-300-SE SG-LC-350-SE 1-800-ERICSON (374-2766) • www.ericson.com Leviton 38 Cross Reference Cable Range Ericson Part # SUPPORT GRIP - DOUBLE EYE, LACE CLOSING .50 - .62 SG-LC-050-OFS .63 - .74 SG-LC-062-OFS .75 - .99 SG-LC-075-OFS 1.00 - 1.24 SG-LC-100-OFS 1.25 - 1.49 SG-LC-125-OFS 1.50 - 1.74 SG-LC-150-OFS 1.75 - 1.99 SG-LC-175-OFS 2.00 - 2.49 SG-LC-200-OFS 2.50 - 2.99 SG-LC-250-OFS 3.00 - 3.49 SG-LC-300-OFS 3.50 - 3.99 SG-LC-350-OFS .50 - .62 SG-LC-050-UB .63 - .74 SG-LC-062-UB .75 - .99 SG-LC-075-UB 1.00 - 1.24 SG-LC-100-UB 1.25 - 1.49 SG-LC-125-UB 1.50 - 1.74 SG-LC-150-UB 1.75 - 1.99 SG-LC-175-UB 2.00 - 2.49 SG-LC-200-UB 2.50 - 2.99 SG-LC-250-UB 3.00 - 3.49 SG-LC-300-UB 3.50 - 3.99 SG-LC-350-UB SUPPORT GRIP - DOUBLE EYE, ROD CLOSING .50 - .62 SG-RC-050-DE .63 - .74 SG-RC-062-DE .75 - .99 SG-RC-075-DE 1.00 - 1.24 SG-RC-100-DE 1.25 - 1.49 SG-RC-125-DE 1.50 - 1.74 SG-RC-150-DE 1.75 - 1.99 SG-RC-175-DE 2.00 - 2.49 SG-RC-200-DE 2.50 - 2.99 SG-RC-250-DE 3.00 - 3.49 SG-RC-300-DE 3.50 - 3.99 SG-RC-350-DE 39 Woodhead Cooper Wiring Hubbell/Kellems P&S 35195 35196 35197 35198 35199 35200 35201 35202 35203 35204 35205 SGOL50 SGOL63 SGOL75 SGOL100 SGOL125 SGOL150 SGOL175 SGOL200 SGOL250 SGOL300 SGOL350 022-02-037 022-02-038 022-02-039 022-02-041 022-02-042 022-02-043 022-02-044 022-02-045 022-02-046 022-02-047 022-02-048 FS050-OF FS062-OF FS075-OF FS100-OF FS125-OF FS150-OF FS175-OF FS200-OF FS250-OF FS300-OF FS350-OF 35225 35226 35227 35228 35229 35230 35231 35232 35233 35234 35235 SGUL50 SGUL63 SGUL75 SGUL100 SGUL125 SGUL150 SGUL175 SGUL200 SGUL250 SGUL300 SGUL350 022-02-050 022-02-051 022-02-052 022-02-054 022-02-055 022-02-056 022-02-057 022-02-058 022-02-059 022-02-060 022-02-061 FS050-LB FS062-LB FS075-LB FS100-LB FS125-LB FS150-LB FS175-LB FS200-LB FS250-LB FS300-LB FS350-LB 35270 35271 35272 35273 35274 35275 35276 35277 35278 35279 35280 SGDR50 SGDR63 SGDR75 SGDR100 SGDR125 SGDR150 SGDR175 SGDR200 SGDR250 SGDR300 SGDR350 022-03-001 022-03-002 022-03-003 022-03-005 022-03-006 022-03-007 022-03-008 022-03-009 022-03-010 022-03-011 022-03-012 FR050-UU FR062-UU FR075-UU FR100-UU FR125-UU FR150-UU FR175-UU FR200-UU FR250-UU FR300-UU FR350-UU .50 - .62 .63 - .74 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 3.50 - 3.99 SG-RC-050-SE SG-RC-062-SE SG-RC-075-SE SG-RC-100-SE SG-RC-125-SE SG-RC-150-SE SG-RC-175-SE SG-RC-200-SE SG-RC-250-SE SG-RC-300-SE SG-RC-350-SE 35285 35286 35287 35288 35289 35290 35291 35292 35293 35294 35295 SGSR50 SGSR63 SGSR75 SGSR100 SGSR125 SGSR150 SGSR175 SGSR200 SGSR250 SGSR300 SGSR350 022-03-013 022-03-014 022-03-015 022-03-017 022-03-018 022-03-019 022-03-020 022-03-021 022-03-022 022-03-023 022-03-024 FR050-U FR062-U FR075-U FR100-U FR125-U FR150-U FR175-U FR200-U FR250-U FR300-U FR350-U .50 - .62 .63 - .74 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 3.50 - 3.99 SG-RC-050-OFS SG-RC-062-OFS SG-RC-075-OFS SG-RC-100-OFS SG-RC-125-OFS SG-RC-150-OFS SG-RC-175-OFS SG-RC-200-OFS SG-RC-250-OFS SG-RC-300-OFS SG-RC-350-OFS 35300 35301 35302 35303 35304 35305 35306 35307 35308 35309 35310 SGOR50 SGOR63 SGOR75 SGOR100 SGOR125 SGOR150 SGOR175 SGOR200 SGOR250 SGOR300 SGOR350 022-03-037 022-03-038 022-03-039 022-03-041 022-03-042 022-03-043 022-03-044 022-03-045 022-03-046 022-03-047 022-03-048 FR050-OF FR062-OF FR075-OF FR100-OF FR125-OF FR150-OF FR175-OF FR200-OF FR250-OF FR300-OF FR350-OF .50 - .62 .63 - .74 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 3.50 - 3.99 SG-RC-050-UB SG-RC-062-UB SG-RC-075-UB SG-RC-100-UB SG-RC-125-UB SG-RC-150-UB SG-RC-175-UB SG-RC-200-UB SG-RC-250-UB SG-RC-300-UB SG-RC-350-UB 35330 35331 35332 35333 35334 35335 35336 35337 35338 35339 35340 SGUR50 SGUR63 SGUR75 SGUR100 SGUR125 SGUR150 SGUR175 SGUR200 SGUR250 SGUR300 SGUR350 022-03-064 022-03-065 022-03-066 022-03-068 022-03-069 022-03-070 022-03-071 022-03-072 022-03-073 022-03-074 022-03-075 FR050-LB FR062-LB FR075-LB FR100-LB FR125-LB FR150-LB FR175-LB FR200-LB FR250-LB FR300-LB FR350-LB 1-800-ERICSON (374-2766) • www.ericson.com Leviton Cross Reference Cable Range Ericson Part # Woodhead Cooper Wiring HEAVY DUTY SUPPORT GRIP - SINGLE EYE, CLOSED MESH, DOUBLE WEAVE .75 - .99 SGHD-CM-075-SE 35435 SGTS75X 1.00 - 1.24 SGHD-CM-100-SE 35436 SGTS100X 1.25 - 1.49 SGHD-CM-125-SE 35437 SGTS125X 1.50 - 1.99 SGHD-CM-150-SE 35438 SGTS150X HEAVY DUTY SUPPORT GRIP - DOUBLE EYE, CLOSED MESH, DOUBLE WEAVE .75 - .99 SGHD-CM-075-DE 35425 SGTD75X 1.00 - 1.24 SGHD-CM-100-DE 35426 SGTD100X 1.25 - 1.49 SGHD-CM-125-DE 35427 SGTD125X 1.50 - 1.99 SGHD-CM-150-DE 35428 SGTD150X 2.00 - 2.49 SGHD-CM-200-DE 35429 SGTD200X 2.50 - 2.99 SGHD-CM-250-DE 35430 SGTD250X 3.00 - 3.49 SGHD-CM-300-DE 35431 SGTD300X 3.50 - 3.99 SGHD-CM-350-DE 35432 SGTD350X 4.00 - 4.49 SGHD-CM-400-DE 35433 SGTD400X CONDUIT RISER GRIP - SINGLE WEAVE CLOSED MESH .50 - .62 CRG-C.75-CM-050 R250X .50 - .62 CRG-C1-CM-050 R350X .63 - .74 CRG-C1-CM-062 R363X .50 - .62 CRG-C1.25-CM-050 R450X .63 - .74 CRG-C1.25-CM-062 R463X .75 - .99 CRG-C1.25-CM-075 R475X .50 - .62 CRG-C1.50-CM-050 R550X .63 - .74 CRG-C1.50-CM-062 R563X .75 - .99 CRG-C1.50-CM-075 R575X 1.00 - 1.24 CRG-C1.50-CM-100 R5100X .50 - .62 CRG-C2-CM-050 R650X .63 - .74 CRG-C2-CM-062 R663X .75 - .99 CRG-C2-CM-075 R675X 1.00 - 1.24 CRG-C2-CM-100 R6100X 1.25 - 1.49 CRG-C2-CM-125 R6125X .50 - .62 CRG-C2.50-CM-050 R750X .63 - .74 CRG-C2.50-CM-062 R763X .75 - .99 CRG-C2.50-CM-075 R775X 1.00 - 1.24 CRG-C2.50-CM-100 R7100X 1.25 - 1.49 CRG-C2.50-CM-125 R7125X 1.50 - 1.74 CRG-C2.50-CM-150 R7150X 1.75 - 1.99 CRG-C2.50-CM-175 R7175X Hubbell/Kellems P&S 022-06-010 022- 06-011 022-06-012 022-06-013 FCHL075-U FCHL100-U FCHL125-U FCHL150-U 022-06-001 022-06-002 022-06-003 022-06-004 022-06-005 022-06-006 022-06-007 022-06-008 022-06-009 FCHL075-UU FCHL100-UU FCHL125-UU FCHL150-UU FCHL200-UU FCHL250-UU FCHL300-UU FCHL350-UU FCHL400-UU Leviton 022-11-106 022-11-100 022-11-101 022-11-001 022-11-002 022-11-003 022-11-005 022-11-006 022-11-007 022-11-009 022-11-102 022-11-107 022-11-010 022-11-012 022-11-013 022-11-108 022-11-109 022-11-014 022-11-016 022-11-017 022-11-018 022-11-019 .50 - .62 .63 - .74 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 CRG-C3-CM-050 CRG-C3-CM-062 CRG-C3-CM-075 CRG-C3-CM-100 CRG-C3-CM-125 CRG-C3-CM-150 CRG-C3-CM-175 CRG-C3-CM-200 R850X R863X R875X R8100X R8125X R8150X R8175X R8200X 022-11-110 N/A 022-11-020 022-11-022 022-11-023 022-11-024 022-11-025 022-11-026 .63 - .74 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 CRG-C3.50-CM-062 CRG-C3.50-CM-075 CRG-C3.50-CM-100 CRG-C3.50-CM-125 CRG-C3.50-CM-150 CRG-C3.50-CM-175 CRG-C3.50-CM-200 CRG-C3.50-CM-250 R963X R975X R9100X R9125X R9150X R9175X R9200X R9250X N/A N/A N/A 022-11-030 022-11-031 022-11-032 022-11-033 022-11-034 .63 - .74 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 -1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 CRG-C4-CM-062 CRG-C4-CM-075 CRG-C4-CM-100 CRG-C4-CM-125 CRG-C4-CM-150 CRG-C4-CM-175 CRG-C4-CM-200 CRG-C4-CM-250 CRG-C4-CM-300 R1063X R1075X R10100X R10125X R10150X R10175X R10200X R10250X R10300X 022-11-113 022-11-035 022-11-037 022-11-038 022-11-039 022-11-040 022-11-041 022-11-042 022-11-043 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 CRG-C4.50-CM-075 CRG-C4.50-CM-100 CRG-C4.50-CM-125 CRG-C4.50-CM-150 CRG-C4.50-CM-175 R1175X R11100X R11125X R11150X R11175X N/A N/A N/A N/A N/A 1-800-ERICSON (374-2766) • www.ericson.com 40 Cross Reference Cable Range Ericson Part # Woodhead Cooper Wiring Hubbell/Kellems R11200X R11250X R11300X R11350X N/A 022-11-051 022-11-052 022-11-053 R1275X R12100X R12125X R12150X R12175X R12200X R12250X R12300X R12350X N/A N/A N/A N/A 022-11-059 022-11-060 022-11-061 022-11-062 022-11-063 R1475X R14100X R14125X R14150X R14175X R14200X R14250X R14300X R14350X N/A N/A N/A N/A N/A N/A 022-11-071 022-11-072 022-11-073 RTL475X 022-12-003 CONDUIT RISER GRIP - SINGLE WEAVE CLOSED MESH 2.00 - 2.49 CRG-C4.50-CM-200 2.50 - 2.99 CRG-C4.50-CM-250 3.00 - 3.49 CRG-C4.50-CM-300 3.50 - 3.99 CRG-C4.50-CM-350 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 3.50 - 3.99 CRG-C5-CM-075 CRG-C5-CM-100 CRG-C5-CM-125 CRG-C5-CM-150 CRG-C5-CM-175 CRG-C5-CM-200 CRG-C5-CM-250 CRG-C5-CM-300 CRG-C5-CM-350 .75 - .99 CRG-C6-CM-075 1.00 - 1.24 CRG-C6-CM-100 1.25 - 1.49 CRG-C6-CM-125 1.50 - 1.74 CRG-C6-CM-150 1.75 - 1.99 CRG-C6-CM-175 2.00 - 2.49 CRG-C6-CM-200 2.50 - 2.99 CRG-C6-CM-250 3.00 - 3.49 CRG-C6-CM-300 3.50 - 3.99 CRG-C6-CM-350 CONDUIT RISER GRIP - DOUBLE WEAVE, SPLIT MESH, LACE CLOSING .75 - .99 CRG-C1.25-LC-075 41 .75 - .99 1.00 - 1.24 CRG-C1.5-LC-075 CRG-C1.5-LC-100 RTL575X RTL5100X 022-12-007 022-12-009 .75 - .99 1.00 - 1.24 1.25 - 1.49 CRG-C2-LC-075 CRG-C2-LC-100 CRG-C2-LC-125 RTL675X RTL6100X RTL6125X 022-12-010 022-12-012 022-12-013 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 CRG-C2.5-LC-075 CRG-C2.5-LC-100 CRG-C2.5-LC-125 CRG-C2.5-LC-150 CRG-C2.5-LC-175 RTL775X RTL7100X RTL7125X RTL7150X RTL7175X 022-12-014 022-12-016 022-12-017 022-12-018 022-12-019 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 CRG-C3-LC-075 CRG-C3-LC-100 CRG-C3-LC-125 CRG-C3-LC-150 CRG-C3-LC-175 CRG-C3-LC-200 RTL875X RTL8100X RTL8125X RTL8150X RTL8175X RTL8200X 022-12-020 022-12-022 022-12-023 022-12-024 022-12-025 022-12-026 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 CRG-C3.5-LC-075 CRG-C3.5-LC-100 CRG-C3.5-LC-125 CRG-C3.5-LC-150 CRG-C3.5-LC-175 CRG-C3.5-LC-200 CRG-C3.5-LC-250 RTL975X RTL9100X RTL9125X RTL9150X RTL9175X RTL9200X RTL9250X N/A N/A N/A N/A N/A 022-12-033 022-12-034 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 CRG-C4-LC-075 CRG-C4-LC-100 CRG-C4-LC-125 CRG-C4-LC-150 CRG-C4-LC-175 CRG-C4-LC-200 CRG-C4-LC-250 CRG-C4-LC-300 RTL1075X RTL10100X RTL10125X RTL10150X RTL10175X RTL10200X RTL10250X RTL10300X 022-12-035 022-12-037 022-12-038 022-12-039 022-12-040 022-12-041 022-12-042 022-12-043 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 CRG-C4.5-LC-075 CRG-C4.5-LC-100 CRG-C4.5-LC-125 CRG-C4.5-LC-150 CRG-C4.5-LC-175 CRG-C4.5-LC-200 CRG-C4.5-LC-250 RTL1175X RTL11100X RTL11125X RTL11150X RTL11175X RTL11200X RTL11250X N/A N/A N/A N/A N/A N/A N/A P&S 1-800-ERICSON (374-2766) • www.ericson.com Leviton Cross Reference Cable Range Ericson Part # Woodhead Cooper Wiring CONDUIT RISER GRIP - DOUBLE WEAVE, SPLIT MESH, LACE CLOSING 3.00 - 3.49 CRG-C4.5-LC-300 RTL11300X 3.50 -3.99 CRG-C4.5-LC-350 RTL11350X .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 3.50 - 3.99 CRG-C5-LC-075 CRG-C5-LC-100 CRG-C5-LC-125 CRG-C5-LC-150 CRG-C5-LC-175 CRG-C5-LC-200 CRG-C5-LC-250 CRG-C5-LC-300 CRG-C5-LC-350 .75 - .99 CRG-C6-LC-075 1.00 - 1.24 CRG-C6-LC-100 1.25 - 1.49 CRG-C6-LC-125 1.50 - 1.74 CRG-C6-LC-150 1.75 - 1.99 CRG-C6-LC-175 2.00 - 2.49 CRG-C6-LC-200 2.50 - 2.99 CRG-C6-LC-250 3.00 - 3.49 CRG-C6-LC-300 3.50 - 3.99 CRG-C6-LC-350 CONDUIT RISER GRIP - SINGLE WEAVE, SPLIT MESH, ROD CLOSING .75 - .99 CRG-C1.5-RC-075 1.00 - 1.24 CRG-C1.5-RC-100 Hubbell/Kellems P&S Leviton N/A N/A RTL1275X RTL12100X RTL12125X RTL12150X RTL12175X RTL12200X RTL12250X RTL12300X RTL12350X N/A N/A N/A N/A N/A N/A 022-12-061 022-12-062 022-12-063 RTL1475X RTL14100X RTL14125X RTL14150X RTL14175X RTL14200X RTL14250X RTL14300X RTL14350X N/A N/A N/A N/A N/A N/A 022-12-071 022-12-072 022-12-073 022-13-007 022-13-009 .75 - .99 1.00 - 1.24 1.25 - 1.49 CRG-C2-RC-075 CRG-C2-RC-100 CRG-C2-RC-125 RR675X RR6100X RR6125X 022-13-010 022-13-012 022-13-013 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 CRG-C2.5-RC-075 CRG-C2.5-RC-100 CRG-C2.5-RC-125 CRG-C2.5-RC-150 CRG-C2.5-RC-175 RR775X RR7100X RR7125X RR7150X RR7175X 022-13-014 022-13-016 022-13-017 022-13-018 022-13-019 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 CRG-C3-RC-075 CRG-C3-RC-100 CRG-C3-RC-125 CRG-C3-RC-150 CRG-C3-RC-175 CRG-C3-RC-200 RR875X RR8100X RR8125X RR8150X RR8175X RR8200X 022-13-020 022-13-022 022-13-023 022-13-024 022-13-025 022-13-026 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 CRG-C3.5-RC-075 CRG-C3.5-RC-100 CRG-C3.5-RC-125 CRG-C3.5-RC-150 CRG-C3.5-RC-175 CRG-C3.5-RC-200 CRG-C3.5-RC-250 RR975X RR9100X RR9125X RR9150X RR9175X RR9200X RR9250X N/A N/A N/A N/A N/A 022-13-033 022-13-034 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 CRG-C4-RC-075 CRG-C4-RC-100 CRG-C4-RC-125 CRG-C4-RC-150 CRG-C4-RC-175 CRG-C4-RC-200 CRG-C4-RC-250 CRG-C4-RC-300 RR1075X RR10100X RR10125X RR10150X RR10175X RR10200X RR10250X RR10300X 022-13-035 022-13-037 022-13-038 022-13-039 022-13-040 022-13-041 022-13-042 022-13-043 .75 - .99 1.00 - 1.24 1.25 - 1.49 1.50 - 1.74 1.75 - 1.99 2.00 - 2.49 2.50 - 2.99 3.00 - 3.49 3.50 - 3.99 CRG-C4.5-RC-075 CRG-C4.5-RC-100 CRG-C4.5-RC-125 CRG-C4.5-RC-150 CRG-C4.5-RC-175 CRG-C4.5-RC-200 CRG-C4.5-RC-250 CRG-C4.5-RC-300 CRG-C4.5-RC-350 RR1175X RR11100X RR11125X RR11150X RR11175X RR11200X RR11250X RR11300X RR11350X N/A N/A N/A N/A N/A N/A N/A N/A N/A 1-800-ERICSON (374-2766) • www.ericson.com 42 Cross Reference Cable Range Ericson Part # Woodhead Cooper Wiring CONDUIT RISER GRIP - SINGLE WEAVE, SPLIT MESH, ROD CLOSING .75 - .99 CRG-C5-RC-075 RR1275X 1.00 - 1.24 CRG-C5-RC-100 RR12100X 1.25 - 1.49 CRG-C5-RC-125 RR12125X 1.50 - 1.74 CRG-C5-RC-150 1.75 - 1.99 CRG-C5-RC-175 2.00 - 2.49 CRG-C5-RC-200 2.50 - 2.99 CRG-C5-RC-250 RR12250X 3.00 - 3.49 CRG-C5-RC-300 RR12300X 3.50 - 3.99 CRG-C5-RC-350 RR12350X .75 - .99 CRG-C6-RC-075 1.00 - 1.24 CRG-C6-RC-100 1.25 -1.49 CRG-C6-RC-125 1.50 -1.74 CRG-C6-RC-150 1.75 - 1.99 CRG-C6-RC-175 2.00 - 2.49 CRG-C6-RC-200 2.50 - 2.99 CRG-C6-RC-250 3.00 - 3.49 CRG-C6-RC-300 3.50 - 3.99 CRG-C6-RC-350 SERVICE DROPS - SINGLE EYE .23 - .31 SD-23-SE .32 - .43 SD-32-SE .43 - .56 SD-43-SE .56 - .73 SD-56-SE .73 - .85 SD-73-SE .85 - 1.00 SD-85-SE 1.00 - 1.25 SD-100-SE SERVICE DROPS - UNIVERSAL BALE (STANDARD) .23 - .31 SD-23-UB .32 - .43 SD-32-UB .43 - .56 SD-43-UB .56 - .73 SD-56-UB .73 - .85 SD-73-UB .85 - 1.00 SD-85-UB 1.00 - 1.25 SD-100-UB SERVICE DROPS - SINGLE EYE (HEAVY DUTY) .23 - .31 SDHD-23-SE .32 - .43 SDHD-32-SE .43 - .56 SDHD-43-SE .56 - .73 SDHD-56-SE .73 - .85 SDHD-73-SE .85 - 1.00 SDHD-85-SE 1.00 - 1.25 SDHD-100-SE SERVICE DROPS - UNIVERSAL BALE (HEAVY DUTY) .23 - .31 SDHD-23-UB .32 - .43 SDHD-32-UB .43 - .56 SDHD-43-UB .56 - .73 SDHD-56-UB .73 - .85 SDHD-73-UB .85 - 1.00 SDHD-85-UB 1.00 - 1.25 SDHD-100-UB LIGHT DUTY PULLING GRIPS - SHORT .50 - .61 LDPG-050-S 35901 .62 - .74 LDPG-062-S 35902 .75 - .99 LDPG-075-S 35903 1.00 - 1.24 LDPG-100-S 35904 1.25 - 1.49 LDPG-125-S 35905 1.50 - 1.74 LDPG-150-S 35906 1.75 - 1.99 LDPG-175-S 35907 2.00 - 2.49 LDPG-200-S 35908 2.50 - 2.99 LDPG-250-S 35909 3.00 - 3.49 LDPG-300-S N/A LIGHT DUTY PULLING GRIPS - STANDARD .50 - .61 LDPG-050 35910 .62 - .74 LDPG-062 35911 .75 - .99 LDPG-075 35912 1.00 - 1.24 LDPG-100 35913 1.25 - 1.49 LDPG-125 35914 1.50 - 1.99 LDPG-150 35915 2.00 - 2.49 LDPG-200 35916 2.50 - 2.99 LDPG-250 35917 Hubbell/Kellems P&S N/A N/A N/A N/A N/A N/A 022-13-061 022-13-062 022-13-063 RR1475X RR14100X RR14125X RR14150X RR14175X RR14200X RR14250X RR14300X RR14350X N/A N/A N/A N/A N/A N/A 022-13-071 022-13-072 022-13-073 SDS23X SDS32X SDS43X SDS56X SDS73X SDS85X SDS100X 022-16-001 *022-16-002 / 022-16-003 *022-16-004 / 022-16-005 *022-16-006 / 022-16-007 / *022-16-008 *022-16-009 / 022-16-010 *022-16-011 / 022-16-012 / *022-16-013 022-16-014 / 022-16-015 FCSD4 FCSD5 / FCSD6 FCSD7 / FCSD8 FCSD9 / FCSD10 / FCSD11 FCSD12 / FCSD13 FCSD14 / FCSD15 FCSD16 / FCSD17 / FCSD18 SDU23X SDU32X SDU43X SDU56X SDU73X SDU85X SDU100X 022-16-016 FCSD4-LB *022-16-017 / 022-16-018 FCSD5-LB /FCSD6-LB *022-16-019 / 022-16-020 FCSD7-LB / FCSD8-LB *022-016-021 / 022-16-022 / *022-16-023 FCSD9-LB / FCSD10-LB / FCSD11-LB / FCSD10-LB *022-16-024 / 022-16-025 FCSD12-LB / FCSD13-LB *022-16-026 / 022-16-027 / *022-16-028 FCSD14-LB / FCSD15-LB 022-16-029 / 022-16-030 FCSD16-LB / FCSD17-LB / FCSD18-LB SDTS23X SDTS32X SDTS43X SDTS56X SDTS73X SDTS85X SDTS100X 022-17-001 *022-17-002 / 022-17-003 *022-17-004 / 022-17-005 *022-17-006 / 022-17-007 / *022-17-008 *022-17-009 / 022-17-010 *022-17-011 / 022-17-012 / *022-17-013 022-17-014 / 022-17-015 SDTU23X SDTU32X SDTU43X SDTU56X SDTU73X SDTU85X SDTU100X 022-17-016 *022-17-017 / 022-17-018 *022-17-019 / 022-17-020 *022-17-021 / 022-17-022 / *022-17-023 *022-17-024 / 022-17-025 *022-17-026 / 022-17-027 / *022-17-028 022-17-029 / 022-17-030 LP5011X LP6211X LP7512X LP10013X LP12514X LP15015X LP17517X LP20018X LP25018X LP30020X 033-03-001 033-03-002 033-03-003 033-03-004 033-03-005 033-03-006 033-03-007 033-03-008 033-03-009 N/A LP5016X LP6216X LP7520X LP10020X LP12521X LP15023X LP20025X LP25027X 033-03-010 033-03-011 033-03-012 033-03-013 033-03-015 033-03-016 033-03-017 033-03-018 *CORD DIAMETER RANGE IS SLIGHTLY DIFFERENT 43 1-800-ERICSON (374-2766) • www.ericson.com Leviton Cross Reference Cable Range Ericson Part # Woodhead LIGHT DUTY PULLING GRIPS - STANDARD 3.00 - 3.49 LDPG-300 35918 3.50 - 3.99 LDPG-350 N/A UTILITY PULLING GRIPS - STANDARD FLEXIBLE EYE - T TYPE .50 - .61 UPG-50-FE .62 - .74 UPG-62-FE .75 - .99 UPG-75-FE 1.00 - 1.49 UPG-100-FE 1.50 - 1.99 UPG-150-FE 2.00 - 2.49 UPG-200-FE 2.50 - 2.99 UPG-250-FE 3.00 - 3.49 UPG-300-FE 3.50 - 3.99 UPG-350-FE LIGHT DUTY PULLING GRIPS - JUNIOR .25 - .36 JPG-25 35970 .37 - .49 JPG-37 35971 .50 - .61 JPG-50 35972 .62 - .74 JPG-62 35973 .75 - .99 JPG-75 35974 1.00 - 1.25 JPG-100 33975 .25 - 1.25(6PC KIT) JPG-KIT 35976 STRAIN RELIEF - NON INSULATED WIDE RANGE .24 - .32 SR-022 .32 - .43 SR-030 36503 .43 - .54 SR-040 36505 .54 - .73 SR-052 36508 .73 - .97 SR-070 36512 .97 - 1.25 SR-094 36515 Cooper Wiring Hubbell/Kellems LP30030X LP35032X 033-03-019 033-03-029 UPF5020X UPF6224X UPF7536X UPF10036X UPF15036X UPF20036X UPF25038X UPF30040X UPF35040X N/A N/A 033-04-1091 033-04-1092 033-04-1093 033-04-1094 033-04-1095 033-04-1096 033-04-1097 LPJ25X LPJ37X LPJ50X LPJ62X LPJ75X LPJ100X LPJ KITX 033-05-001 033-05-002 033-05-003 033-05-004 033-05-005 033-05-006 033-05-1114 TC124X TC132X TC143X TC254X TC373X TC497X 073-03-1200 073-03-1201 073-03-1202 073-03-1203 073-03-1204 073-03-1205 P&S Leviton BOX22 BOX30 BOX40 BOX52 BOX70 BOX94 L7502 L7503 L7504 L7505 1-800-ERICSON (374-2766) • www.ericson.com 44 Cross Reference Cable Range Ericson Part # Woodhead STRAIN RELIEF - INSULATED WIDE RANGE .24 - .32 SRI-022 .32 - .43 SRI-030 .43 - .54 SRI-040 .54 - .73 SRI-052 .73 - .97 SRI-070 .97 - 1.25 SRI-094 1.25 - 1.50 SRI-120 1.50 - 1.70 SRI-140 1.70 - 2.00 SRI-162 2.00 - 2.45 SRI-200 BUS DROP GRIPS - SINGLE EYE, WIDE RANGE .22 - .32 BD-022-SE .30 - .43 BD-030-SE .41 - .56 BD-041-SE .53 - .73 BD-053-SE .70 - .85 BD-070-SE .82 -1.00 BD-082-SE .96 - 1.25 BD-096-SE 1.25 - 1.50 BD-125-SE BUS DROP GRIPS - UNVERSAL EYE, WIDE RANGE .22 - .32 BD-022-UB .30 - .43 BD-030-UB .41 - .56 BD-041-UB .53 - .73 BD-053-UB .70 - .85 BD-070-UB .82 - 1.00 BD-082-UB .96 - 1.25 BD-096-UB BUS DROP GRIPS - SAFETY SPRINGS 40LB SPRING 80LB SPRING DELUXE CORD GRIP .18 - .25 DCG-25-F1 .25 - .37 DCG-37-F1 .37 - .43 DCG-43-F1 .18 - .25 .25 - .37 .37 - .43 .43 - .50 .50 - .62 DCG-25-F2 DCG-37-F2 DCG-43-F2 DCG-50-F2 DCG-62-F2 .18 - .25 .25 - .37 .37 - .50 .50 - .62 .62 - .75 DCG-25-F3 DCG-37-F3 DCG-50-F3 DCG-62-F3 DCG-75-F3 .37 - .50 .50 - .62 .62 - .75 .75 - .87 .87 - 1.00 DCG-50-F4 DCG-62-F4 DCG-75-F4 DCG-87-F4 DCG-100-F4 .75 - .87 .87 - 1.00 1.00 - 1.125 1.12 - 1.25 1.25 - 1.37 DCG-87-F5 DCG-100-F5 DCG-112-F5 DCG-125-F5 DCG-137-F5 .75 - .87 .87 - 1.00 1.00 - 1.125 1.125 - 1.25 1.25 - 1.37 1.37 - 1.43 DCG-87-F6 DCG-100-F6 DCG-112-F6 DCG-125-F6 DCG-137-F6 DCG-143-F6 1.200 - 1.375 1.375 - 1.500 1.500 - 1.625 1.625 - 1.750 1.750 - 1.875 DCG-137-F7 DCG-150-F7 DCG-162-F7 DCG-175-F7 DCG-187-F7 Cooper Wiring Hubbell/Kellems P&S 36501 36503 36505 36508 36512 36515 36516 36517 36518 36519 TCI124X TCI132X TCI143X TCI254X TCI373X TCI497X TCI5125X TCI6150X TCI7170X TCI7200X 073-03-1206 073-03-1207 073-03-1208 073-03-1209 073-03-1210 073-03-1211 073-03-1212 073-03-1213 073-03-1214 073-03-1215 BOX22 BOX30 BOX40 BOX52 BOX70 BOX94 BOX120 BOX140 N/A N/A 36560 36562 36564 36567 36569 36571 36574 BDS22X BDS30X BDS41X BDS53X BDS70X BDS82X BDS96X 073-04-1276 073-04-1277 073-04-1278 073-04-1279 073-04-1280 073-04-1281 073-04-1282 FC22 FC30 FC40 FC52 FC70 FC70 FC94 36580 36582 36584 36587 36589 36591 36594 BDU22X BDU30X BDU41X BDU53X BDU70X BDU82X BDU96X 073-04-1283 073-04-1284 073-04-1285 073-04-1286 073-04-1287 073-04-1288 073-04-1289 FC22-LB FC30-LB FC40-LB FC52-LB FC70-LB N/A FC95-LB 36237 36238 B2001X B2002X 203-02-001 203-02-002 203-02-001 203-02-002 DC000375X N/A 074-01-001/ 074-01-002 074-01-003 DC100375X DC100500X 074-01-004 074-01-006 074-01-008 074-01-008 074-01-010 DC200375X DC200500X DC200625X 074-01-011 074-01-013 074-01-015 074-01-017 074-01-018 DC300375X DC300500X DC300625X DC300750X DC300875X 074-01-1195 074-01-019 074-01-021 074-01-023 074-01-025 DC400875X DC4001000X DC4001188X 074-01-1251 074-01-026 074-01-027 074-01-028 074-01-1178 DC500875X DC5001000X DC5001188X 074-01-1252 074-01-029 074-01-030 074-01-031 074-01-032 *074-01-1253 1300970163 1300970167 1300970168 1300970170 1300970171 1300970175 DC5001375X DC6001375X DC6001625X N/A N/A N/A N/A 074-01-1260 *CORD DIAMETER RANGE IS SLIGHTLY DIFFERENT 45 1-800-ERICSON (374-2766) • www.ericson.com Leviton L7982 L7983 L7984 L7985 Cross Reference Cable Range DELUXE CORD GRIP 1.875 - 1.937 1.937 - 2.000 Ericson Part # 1.687 - 1.812 1.812 - 1.937 1.937 - 2.062 2.062 - 2.187 2.187 - 2.312 2.312 - 2.437 DCG-181-F8 DCG-193-F8 DCG-206-F8 DCG-218-F8 DCG-231-F8 DCG-243-F8 DC7002188X 074-01-1030 074-01-1031 074-01-1032 074-01-1033 074-01-1034 074-01-1266 2.437 - 2.625 2.625 - 2.812 2.812 - 3.00 DCG-262-F9 DCG-281-F9 DCG-300-F9 DC8002188X - 074-01-1186 074-01-1187 074-01-1188 .18 - .25 .25 - .37 .37 - .43 DCG-25-F1-90 DCG-37-F1-90 DCG-43-F1-90 - N/A 074-01-071 / 074-01-072 074-01-073 .18 - .25 .25 - .37 .37 - .43 .43 - .50 .50 - .62 DCG-25-F2-90 DCG-37-F2-90 DCG-43-F2-90 DCG-50-F2-90 DCG-62-F2-90 DC190375X DC190500X 074-01-074 074-01-076 074-01-078 074-01-078 074-01-080 .18 - .25 .25 - .37 .37 - .50 .50 - .62 .62 - .75 DCG-25-F3-90 DCG-37-F3-90 DCG-50-F3-90 DCG-62-F3-90 DCG-75-F3-90 DC290375X DC290500X DC290625X N/A N/A 074-01-081 074-01-083 074-01-084 .37 -.50 .50 -.62 .62 - .75 .75 -.87 .87 - 1.00 DCG-50-F4-90 DCG-62-F4-90 DCG-75-F4-90 DCG-87-F4-90 DCG-100-F4-90 DC390500X DC390625X DC390750X DC390875X 074-01-1197 074-01-085 074-01-087 074-01-089 074-01-091 .75 - .87 .87 - 1.00 1.00 - 1.125 1.12 - 1.25 1.25 - 1.37 DCG-87-F5-90 DCG-100-F5-90 DCG-112-F5-90 DCG-125-F5-90 DCG-137-F5-90 DC490875X DC4901000X DC4901188X 074-01-1230 074-01-137 074-01-108 074-01-1042 N/A .75 - .87 .87 - 1.00 1.00 - 1.125 1.125 - 1.25 1.25 - 1.37 1.37 - 1.43 DCG-87-F6-90 DCG-100-F6-90 DCG-112-F6-90 DCG-125-F6-90 DCG-137-F6-90 DCG-143-F6-90 DC5901375X N/A 074-01-1044 074-01-1045 074-01-1046 074-01-1047 N/A 1.200 - 1.375 1.375 - 1.500 1.500 - 1.625 1.625 - 1.750 1.750 - 1.875 1.875 - 1.937 1.937 - 2.000 DCG-137-F7-90 DCG-150-F7-90 DCG-162-F7-90 DCG-175-F7-90 DCG-187-F7-90 DCG-197-F7-90 DCG-200-F7-90 DC6901875X N/A N/A N/A N/A 074-01-1234 N/A N/A .18 - .25 .25 - .37 .37 - .43 DCG-25-F1-45 DCG-37-F1-45 DCG-43-F1-45 - N/A N/A N/A .18 - .25 .25 - .37 .37 - .43 .43 - .50 .50 - .62 DCG-25-F2-45 DCG-37-F2-45 DCG-43-F2-45 DCG-50-F2-45 DCG-62-F2-45 DC145375X DC145500X N/A 074-01-1236 074-01-1021 074-01-1021 074-01-1237 .18 - .25 .25 - .37 .37 - .50 .50 - .62 DCG-25-F3-45 DCG-37-F3-45 DCG-50-F3-45 DCG-62-F3-45 DC245375X DC245500X N/A N/A 074-01-1238 074-01-1049 DCG-193-F7 DCG-200-F7 Woodhead Cooper Wiring Hubbell/Kellems DC6001875X N/A N/A DC7001625X DC7001625X DC7001875X DC7001875X P&S 1-800-ERICSON (374-2766) • www.ericson.com Leviton 46 Cross Reference Cable Range Ericson Part # DELUXE CORD GRIP .62 - .75 Woodhead Cooper Wiring Hubbell/Kellems DCG-75-F3-45 DC245625X 074-01-1051 .37 - .50 .50 - .62 .62 - .75 .75 - .87 .87 - 1.00 DCG-50-F4-45 DCG-62-F4-45 DCG-75-F4-45 DCG-87-F4-45 DCG-100-F4-45 DC345500X DC345625X DC345750X DC345875X N/A 074-01-1053 074-01-1055 074-01-1057 074-01-1199 .75 - .87 .87 - 1.00 1.00 - 1.125 1.12 - 1.25 1.25 - 1.37 DCG-87-F5-45 DCG-100-F5-45 DCG-112-F5-45 DCG-125-F5-45 DCG-137-F5-45 DC445875X DC4451000X 074-01-1241 074-01-1022 074-01-1059 074-01-1060 074-01-1061 .75 - .87 .87 - 1.00 1.00 - 1.125 1.125 - 1.25 1.25 - 1.37 1.37 - 1.43 DCG-87-F6-45 DCG-100-F6-45 DCG-112-F6-45 DCG-125-F6-45 DCG-137-F6-45 DCG-143-F6-45 DC5451375X DC5451625X N/A N/A 074-01-1063 074-01-1064 074-01-1065 N/A .18 - .25 .25 - .37 .37 - .43 DCG-25-F1-F DCG-37-F1-F DCG-43-F1-F - N/A 074-01-036 / 074-01-037 074-01-038 .18 - .25 .25 - .37 .37 - .43 .43 - .50 .50 - .62 DCG-25-F2-F DCG-37-F2-F DCG-43-F2-F DCG-50-F2-F DCG-62-F2-F - - 074-01-039 074-01-041 074-01-043 074-01-043 074-01-045 .18 - .25 .25 - .37 .37 - .50 .50 - .62 .62 - .75 DCG-25-F3-F DCG-37-F3-F DCG-50-F3-F DCG-62-F3-F DCG-75-F3-F DCF200500X DCF200625X N/A 074-01-048 074-01-050 074-01-052 074-01-053 .37 - .50 .50 - .62 .62 - .75 .75 - .87 .87 - 1.00 DCG-50-F4-F DCG-62-F4-F DCG-75-F4-F DCG-87-F4-F DCG-100-F4-F DCF300500X DCF300625X DCF300750X DCF300875X N/A 074-01-054 074-01-056 074-01-058 074-01-060 .75 - .87 .87 - 1.00 1.00 - 1.125 1.12 - 1.25 1.25 - 1.37 DCG-87-F5-F DCG-100-F5-F DCG-112-F5-F DCG-125-F5-F DCG-137-F5-F DCF400875X DCF4001000X DCF4001188X N/A N/A N/A N/A N/A .75 - .87 .87 - 1.00 1.00 - 1.125 1.125 - 1.25 1.25 - 1.37 1.37 - 1.43 CORD GRIP .18 - .25 .25 - .37 .37 - .43 DCG-87-F6-F DCG-100-F6-F DCG-112-F6-F DCG-125-F6-F DCG-137-F6-F DCG-143-F6-F DCF5001375X N/A N/A N/A N/A N/A N/A DC4451188X DCF100375X CG-25-F1 CG-37-F1 CG-43-F1 SHC-1009 SHC-1010 / SHC-1011 SHC-1012 .18 - .25 .25 - .37 .37 - .43 .43 - .50 .50 - .62 CG-25-F2 CG-37-F2 CG-43-F2 CG-50-F2 CG-62-F2 SHC-1015 / SHC-1021 SHC-1016 / 1017 / 1022 SHC-1018 *SHC-1023 / *SHC-1025 SHC-1024 / SHC-1026 .18 - .25 .25 - .37 .37 - .50 .50 - .62 .62 - .75 CG-25-F3 CG-37-F3 CG-50-F3 CG-62-F3 CG-75-F3 SHC-1031 SHC-1032 SHC-1033 SHC-1034 / SHC-1036 SHC-1037 P&S *CORD DIAMETER RANGE IS SLIGHTLY DIFFERENT 47 1-800-ERICSON (374-2766) • www.ericson.com Leviton Cross Reference Cable Range CORD GRIP .37 - .50 .50 - .62 .62 - .75 .75 - .87 .87 - 1.00 Ericson Part # Woodhead Cooper Wiring Hubbell/Kellems CG-50-F4 CG-62-F4 CG-75-F4 CG-87-F4 CG-100-F4 SHC-1039 SHC-1040 SHC-1041 SHC-1042 SHC-1043 .75 - .87 .87 - 1.00 1.00 - 1.125 1.12 - 1.25 1.25 - 1.37 CG-87-F5 CG-100-F5 CG-112-F5 CG-125-F5 CG-137-F5 SHC-1050 SHC-1051 SHC-1052 SHC-1053 SHC-1054 .75 - .87 .87 - 1.00 1.00 - 1.125 1.125 - 1.25 1.25 - 1.37 1.37 - 1.43 CG-87-F6 CG-100-F6 CG-112-F6 CG-125-F6 CG-137-F6 CG-143-F6 SHC-1055 SHC-1056 SHC-1057 SHC-1058 SHC-1059 *SHC-1061 1.200 - 1.375 1.375 - 1.500 1.500 - 1.625 1.625 - 1.750 1.750 - 1.875 1.875 - 1.937 1.937 - 2.000 CG-137-F7 CG-150-F7 CG-162-F7 CG-175-F7 CG-187-F7 CG-193-F7 CG-200-F7 SHC-1065 SHC-1066 SHC-1067 SHC-1068 SHC-1069 SHC-1071 SHC-1072 1.687 - 1.812 1.812 - 1.937 1.937 - 2.062 2.062 - 2.187 2.187 - 2.312 2.312 - 2.437 CG-181-F8 CG-193-F8 CG-206-F8 CG-218-F8 CG-231-F8 CG-243-F8 SHC-1076 SHC-1077 SHC-1078 SHC-1079 SHC-1080 SHC-1081 2.437 - 2.625 2.625 - 2.812 2.812 - 3.00 3.000 - 3.250 CG-262-F9 CG-281-F9 CG-300-F9 CG-325-F9 SHC-1092 SHC-1093 SHC-1094 N/A .18 - .25 .25 - .37 .37 - .43 CG-25-F1-90 CG-37-F1-90 CG-43-F1-90 NHC-1009 NHC-1010 / NHC-1011 NHC-1012 .18 - .25 .25 - .37 .37 - .43 .43 - .50 .50 - .62 CG-25-F2-90 CG-37-F2-90 CG-43-F2-90 CG-50-F2-90 CG-62-F2-90 NHC-1021 NHC-1022 NHC-1023 NHC-1023 NHC-1024 .18 - .25 .25 - .37 .37 - .50 .50 - .62 .62 - .75 CG-25-F3-90 CG-37-F3-90 CG-50-F3-90 CG-62-F3-90 CG-75-F3-90 N/A N/A NHC-1035 NHC-1036 NHC-1037 .37 - .50 .50 - .62 .62 - .75 .75 - .87 .87 - 1.00 CG-50-F4-90 CG-62-F4-90 CG-75-F4-90 CG-87-F4-90 CG-100-F4-90 N/A NHC-1040 NHC-1041 NHC-1042 NHC-1043 .75 - .87 .87 - 1.00 1.00 - 1.125 1.12 - 1.25 1.25 - 1.37 CG-87-F5-90 CG-100-F5-90 CG-112-F5-90 CG-125-F5-90 CG-137-F5-90 NHC-1050 NHC-1051 NHC-1052 NHC-1053 NHC-1054 .75 - .87 .87 - 1.00 1.00 - 1.125 1.125 - 1.25 CG-87-F6-90 CG-100-F6-90 CG-112-F6-90 CG-125-F6-90 N/A N/A NHC-1057 NHC-1058 P&S Leviton *CORD DIAMETER RANGE IS SLIGHTLY DIFFERENT 1-800-ERICSON (374-2766) • www.ericson.com 48 Cross Reference Cable Range CORD GRIP 1.25 - 1.37 1.37 - 1.43 49 Ericson Part # Woodhead Cooper Wiring Hubbell/Kellems CG-137-F6-90 CG-143-F6-90 NHC-1059 N/A 1.200 - 1.375 1.375 - 1.500 1.500 - 1.625 1.625 - 1.750 1.750 - 1.875 1.875 - 1.937 1.937 - 2.000 CG-137-F7-90 CG-150-F7-90 CG-162-F7-90 CG-175-F7-90 CG-187-F7-90 CG-193-F7-90 CG-200-F7-90 N/A N/A N/A N/A N/A N/A N/A .18 - .25 .25 - .37 .37 - .43 CG-25-F1-45 CG-37-F1-45 CG-43-F1-45 N/A N/A N/A .18 - .25 .25 - .37 .37 - .43 .43 - .50 .50 -.62 CG-25-F2-45 CG-37-F2-45 CG-43-F2-45 CG-50F-2-45 CG-62-F2-45 VHC-1021 VHC-1022 VHC-1023 VHC-1023 VHC-1024 .18 - .25 .25 - .37 .37 - .50 .50 - .62 .62 - .75 CG-25-F3-45 CG-37-F3-45 CG-50-F3-45 CG-62-F3-45 CG-75-F3-45 N/A N/A VHC-1035 VHC-1036 VHC-1037 .37 - .50 .50 - .62 .62 - .75 .75 - .87 .87 - 1.00 CG-50-F4-45 CG-62-F4-45 CG-75-F4-45 CG-87-F4-45 CG-100-F4-45 N/A N/A VHC-1041 VHC-1042 VHC-1043 .75 - .87 .87 - 1.00 1.00 - 1.125 1.12 - 1.25 1.25 - 1.37 CG-87-F5-45 CG-100-F5-45 CG-112-F5-45 CG-125-F5-45 CG-137-F5-45 N/A N/A VHC-1052 VHC-1053 N/A .75 - .87 .87 - 1.00 1.00 - 1.125 1.125 - 1.25 1.25 - 1.37 1.37 - 1.43 CG-87-F6-45 CG-100-F6-45 CG-112-F6-45 CG-125-F6-45 CG-137-F6-45 CG-143-F6-45 N/A N/A N/A N/A N/A N/A .18 - .25 .25 - .37 .37 - .43 CG-25-F1-F CG-37-F1-F CG-43-F1-F FHC-1009 FHC-1010 N/A .18 - .25 .25 - .37 .37 - .43 .43 - .50 .50 - .62 CG-25-F2-F CG-37-F2-F CG-43-F2-F CG-50-F2-F CG-62-F2-F FHC-1021 FHC-1022 FHC-1023 FHC-1023 FHC-1024 .18 - .25 .25 - .37 .37 - .50 .50 - .62 .62 - .75 CG-25-F3-F CG-37-F3-F CG-50-F3-F CG-62-F3-F CG-75-F3-F N/A N/A FHC-1033 FHC-1034 N/A .37 - .50 .50 - .62 .62 - .75 .75 - .87 .87 - 1.00 CG-50-F4-F CG-62-F4-F CG-75-F4-F CG-87-F4-F CG-100-F4-F N/A N/A N/A FHC-1042 FHC-1043 .75 - .87 .87 - 1.00 1.00 - 1.125 CG-87-F5-F CG-100-F5-F CG-112-F5-F N/A N/A N/A P&S 1-800-ERICSON (374-2766) • www.ericson.com Leviton Notes 1-800-ERICSON (374-2766) • www.ericson.com 50 1-800-ERICSON (374-2766) • www.ericson.com 1-800-ERICSON (374-2766) • www.ericson.com 1-800-ERICSON (374-2766) • www.ericson.com