6 Volt 7.0 AH
PS-670
Features
Terminals: (mm)
•
Absorbent
Glass Mat (AGM) technology for superior
performance
•
Valve
regulated, spill proof construction allows safe
operation in any position
•
Power/volume
ratio yielding unrivaled energy density
•
Rugged impact resistant ABS case and cover (UL94-HB)
•
Approved
for transport by air. D.O.T., I.A.T.A., F.A.A.
and C.A.B. certified
•
U.L. recognized under file number MH 20845
Performance Specifications
Nominal Voltage..........................................................6 volts (3 cells)
3.2
• F 1 - Quick disconnect
tabs, 0.187” x 0.032”Mate with AMP. INC.
FASTON “187” series
Nominal Capacity
4.75
20-hr. (350mA to 5.25 volts) ............................................. 7.00 AH
10-hr. (630mA to 5.25 volts) ............................................. 6.30 AH
6.35
0.8
5-hr.
(1.19A to 5.10 volts) .............................................. 5.95 AH
1-hr.
(4.34A to 4.50 volts) .............................................. 4.34 AH
15-min.(13.5A to 4.50 volts)................................................ 3.38 AH
Physical Dimensions: in (mm)
Approximate Weight .......................................... 2.42 lbs. (1.10 kg)
Energy Density (20-hr. rate) ................ 1.42 W-h/in3 (86.88 W-h/l)
Specific Energy (20-hr. rate) ............. 17.36 W-h/lb (38.26 W-h/kg)
W
Internal Resistance (approx.) ...................................... 15 milliohms
Max Discharge Current (7 Min.) ................................ 21.0 amperes
Max Short-Duration Discharge Current (10 Sec.)..... 70.0 amperes
Shelf Life (% of nominal capacity at 68°F (20°C)
MO DE L
P S -670 F 1
H
TTE RY
BA
US T B E R
Pb
YCLE D
MH20845
060070260211
EC
M
Warning:
HT
3 Months................................................................................. 91%
8
6 Volt 7.0 Amp. Hr.
R echargeable S ealed L ead-Acid B attery
DC power, cons tant voltage charge
C ycle us e: 7.20 - 7.50V (20 C )
S tandby us e: 6.75 - 6.90V (20 C )
Initial current: 2.1A MAX
R is k of fire, explos ion, or burns .
Do not dis as s emble, heat above 60 C , or incinerate.
1 Month .................................................................................. 97%
4
13340 01015
S ealed R echargeable
B attery
NONS P IL L A B L E
L
6 Months ................................................................................ 83%
Operating Temperature Range
Charge. ................................................. -4°F (-20°C) to 122°F (50°C)
Discharge............................................. -40°F (-40°C) to 140°F (60°C)
L: 5.95 (151) W: 1.34 (34) H: 3.70 (94) HT: 3.94 (100)
Case................................................................................... ABS Plastic
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for
height dimensions. All data subject to change without notice.
Power-Sonic Chargers..................................PSC-61000A, 61000A-C
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
All data subject to change without notice.
www.power-sonic.com
PS-670 6 Volt 7.0 AH
®
Discharge Characteristics
100
Charging is not
necessary unless
100% of capacity
is required.
80
Charging before
use is necessary
to help recover
full capacity.
5oC
(41oF)
60
o
40oC
(104oF)
40
0
7.0
0
2
4
6
20oC
(68oF)
30 C
o
(86 F)
8
10
Charge may fail
to restore full
capacity. Do not
let batteries reach
this state.
12
14
16
18
o
6.0
5.5
5.0
0.70 0.35
1.4
3.5
4.5
Final
Voltage
20
4.0
Standing Period (Months)
o
Ambient Temperature 20 C (68 F)
6.5
Terminal Voltage (V)
Capacity Retention Ratio (%)
Shelf Life & Storage
7.0
14
1.2
Discharge Time vs. Discharge Current
2.4
6
12
24 36 48 1
2
min
4 6 8 10
20 4 0
h
Discharge Time
20
15
10
Discharge Time
5
Retention Capacity (%)
h
Life Characteristics in Stand-By Use
Final
Voltage
5.25V
2
5.10V
1
4.80V
min
30
Ambient Temperature 20˚C (68˚F)
100
80
60
Float Charging Voltage
2.25 - 2.30 V/Cell
40
20
0
0
4.50V
o
1
2
o
40 C (104 F)
o
o
20 C (68 F)
o
o
0 C (32 F)
10
3
4
Years
4.05V
5
Life Characteristics in Cyclic Use
0.35
0.70 1.4
3.5
7.0
14
120
Discharge Current (A)
Charging
Cycle Applications: Limit initial current to 2.1A. Charge until battery voltage (under
charge) reaches 7.20 to 7.35 volts at 68°F (20°C). Hold at 7.20 to 7.35 volts until
current drops to under 70mA. Battery is fully charged under these conditions, and
charger should be disconnected or switched to “float” voltage.
“Float” or “Stand-By” Service: Hold battery across constant voltage source of 6.75
to 6.90 volts continuously. When held at this voltage, the battery will seek its own
current level and maintain itself in a fully charged condition.
Note: Due to the self-discharge characteristics of this type of battery, it is imperative
that they be charged within 6 months of storage, otherwise permanent loss of
capacity might occur as a result of sulfation.
Chargers
Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH.
Please refer to the Charger Selection Guide in our specification sheets for “C-Series
Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our
Technical department for advice if you have difficulty in locating suitable models.
Retention Capacity (%)
100
80
60
Discharge
Depth 100%
Discharge
Depth 50%
Discharge
Depth 30%
40
1. Discharge Current 0.2C (Final Voltage 1.7V/Cell)
2. Charge Current: 0.1C
3. Ambient Temperature: 20oC to 25oC (68oF to 77oF)
20
0
0
200
400
600
800
1000
1200
Number of Cycles
Further Information
Please refer to our website www.power-sonic.com for a complete range of useful
downloads, such as product catalogs, material safety data sheets (MSDS), ISO
certification, etc..
Para ventas en México:
batterymaster.com
01800-800-1050