Machinery
International Corp.
20 Commerce Dr.
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
john@machyintl.com
BUYING, SELLING, AND APPRAISING USED METALWORKING MACHINERY
THE WORLD’S SOURCE FOR QUALITY TUBE MACHINERY
ULTRA MODERN COPPER TUBE PLANT FOR SALE (12291)
Hundreds
of Machines
in Stock and
at Plants is
around
World.
buy andcopper
sell complete
plants.using
Herestate-of-the-art
are just a few!
Machinery
International
Corporation
proudthe
to offer
forPlus
salewe
thisappraise,
fully automated
tube factory
technology in all aspects of production and material handling. This fully integrated plant from melting/casting to finish product
uses cast and roll technology to produce 1815 metric tons (4,000,000 pounds) per month of the highest quality copper tube for
the water/plumbing industry and inner groove copper tubing for the ACR air conditioning and refrigeration industry.
COPPER TUBE PLANT FOR SALE
All machines were produced in 2001 or newer by the world's best known manufacturers, including SMS, MRB Schumag,
Located in Sydney, Australia
Induga Furnaces, and Asmag material handling systems. The production flow is computer controlled, and all product travels
To be sold
as Individual
exclusively
by Machinery International Corporation
from machine- to-machine in payoff
baskets
thatMachines
are CNC
controlled.
This is an excellent opportunity to purchase the world's most modern technology at a fraction of the cost of new. The sale
Meathook Overhead Coil Conveyor System
Featuring
includes all necessary hardware and software, and all manufacturers are available for technical support and spare parts.
In-Ground Power Driven Basket Conveyor System
Three Level
BasketPLANT
Conveyor/Storage
SystemSOLD AS A
NO3 INDIVIDUAL
MACHINES
SOLDLINE
SEPARATELY.
THIS
IS BEING
SCHUMAG
STATION CASCADE
COMBINEDWILL
TUBE BE
DRAWING
COMPLETE
PLANT ONLY FOR EXPORT OUTSIDE OF NORTH AMERICA.
Tube Drawing
Line
FINISHING EQUIPMENT
- New in 1997
- Draws copper shells from 3.35” (85 mm) to 1 ½” (38 mm) in one operation
- Produces either coils or straight lengths
- Demag Pick and Place loading crane system, fully automated, shell tracking
- Includes all necessary squeeze pointers and saws
- Schumag inverted coiler to make 84” (2134 mm) coils for drawblocks
- Fully automated - State-of-the-Art
3500 TON BLH OIL HYDRAULIC EXTRUSION PRESS
Schumag Model OB Combined Drawing
Machine for ½” - 0.78” (12.5 - 2 mm)
straighten, draw, Eddy Current Test (ECT),
Flying Saw, for straight lengths or coils
(12744)
Vaughn Straighten, Cut & Coil Line for ¼” 1” (6 - 25 mm), Ruesch Inverted Coiler
Schumag OB
- Underwater runout
Schumag Level Winding Line, New 1991, for 1/8” - 1” (3.18 - 25 mm) Tube
- Loma Model T40 fully automated PLC Billet Saw
- Granco Clark Gas-Fired Billet Furnace
CHARACTERISTICS
400 KW
In Line Annealer with Payoff, Straightener, Accumulator, Inductoheat Tube
- Maximum Billet 12” (305 mm) x 24” (610 mm) LengthINDIVIDUAL MACHINE
- Billet SMS
Size asMEER
used 10
¾”
(273
mm)
Diameter
Annealer,
LomaticMODEL
Draw Station,
Flying Shear CUT, COIL, TEST &
HORIZONTAL CONTINUOUS CASTING PLANT
SCHUMAG
RFSand
STRAIGHTEN,
- ChiplessSMS
Rotary
Cutoff
for front Charging
and back ends
Meer
Cathode
System
MARKING FINISHING MACHINE
Twoshell
900storage
kW, 8 rack
Ton system
Induga Channel Melting Furnaces
size:&6mm
- 30mm
(0.236"
- 1.18")
- Automated
Draw,Tube
Straighten
Cut Line,
Pointer,
Schumag
Size 2 Draw Station, Flying Shear,
350 kW, 10 Ton Induga Pressurized holding furnace (and spare furnace)Loma Mann Coiler, for finish straight lengths or coils
SMS Meer Four Strand Withdrawal Train with two separate withdraw
DRAWBENCHES
drives to produce 101mm (4") tube
30 Ton Vaughn
5 Die,Tube
90 Ft.Weight:
(27.4 m) 1080
draw, barrel
rollover,
400 HP D.C. (12738)
Maximum
Kg (2381
Lbs.)
40 Ton Farmer Norton 1 or 3 Die, 52 Ft. (15.8 m) draw, barrel rollover, 100 HP (12737)
40 TonSMS
Hydraulic
1 DieTUBE
for drawing
and expanding,
45 Ft. (13.7 m) draw, 110 KW
MEER
MILLING
MACHINE
(12737)
MEER HRM
REDUCTION
MILL
25 TonSMS
Mannesmann
Meer 3100
Die,HIGH
75 Ft. (23
m) draw, barrel
rollover, 300 HP (12735)
2134mm (84") SMS MEER SPINNER BLOCK
Model No.: 45 TVC 2000
Eddy Maximum
Current Test,shell:
Marking
& Packing
(Bundling)
Line, xfor0.070")
straight Wall
lengths 1” - 8”
35mm
x 1.75mm
(1.378"
(25 - Speed:
206 mm)250
Dia. -w/bundle
unloader,
ECT
station,
Matthews
marker,
weighing,
1500 m/min (820 - 4920 FPM)
bundling and strapping
INDUCTOHEAT IN-LINE COIL TO COIL ANNEALING FURNACE
TubeBlow
diameter:
9.0mm
10mm
0.40")
ACR Tube
& Cap Line,
New -2007,
for(0.35"
½” - 2”- (12.7
- 50 mm) dia. x 16 ½ - 20 Ft.
Main drive: 2 x 428kW (574 HP) DC
Wall:
0.21mm
0.6mm
(0.008"
0.0236")
(5 - 6.1 m) straight lengths, Tube Clean I.D. plug blowing, end capping stations and extra
Superimpose drive: 1 x 428 kW (574 HP) DC
Line speed: 300m/min. (984 FPM)
DRAWBLOCKS
Feed: 1194mm - 1270mm/Min. (47 - 50 ipm) @ (4" O.D. shell x 1" wall) stations for future applications like nitrogen pre-charging, deburring, etc.
84” (2134
mm) MRB
Block,
Model
1991,
0 - 3937
FPM
(1200 m/
Output
tubeSpinner
is: 201m
(660
Ft.)VNCB84,
Long xNew
57mm
(2.25")
O.D.
x 3.175mm
MRB SCHUMAG MODEL VNVG 2000 INNER GROOVING
Min.), 300
KW, for 1.2”
Bundling
and Packing
Line, New 1988, for straight lengths ½” - 1 3/8” (12.7 - 35 mm)
(0.125")
Wall(30 mm) to 0.157” (4 mm) draw, 8 Station Carrousel (12739)
MACHINES
(4 ea)
907 Kg (2,000 Lbs.) shell is processed in 13 - 14 minutes.
Draw force
maximum:counting,
8 kN loading, bundling, strapping and weighing
dia. including
tube separation,
Maximum Speed: 125m/Min. (410 FPM)
84” (2134 mm) Vaughn Rotubloc Spinner Block, 0-2400 FPM (731 m/min.) 350 HP, for
MODEL
IIB/12
AND Carrousel
IIB/8 DOUBLE
Grooving
100m/Min.
FPM)6 Roll, 0 - 50 FPM
2” (50 SCHUMAG
mm) to ¼” (6.35
mm) draw,
8 Station
(12739) COMBINED DRAWING BronxMaximum
6CR7 RotaryInner
Straightener,
for Speed:
¾” - 8” (19
- 203 mm)(325
dia. tube,
MACHINE
Maximum inlet: 16.3 mm O.D. (0.642")
(0 - 15
m/min.),
optional incising
marking station
Tube size: 54mm (2.125") at entry
Range
of tables,
inner groove
tube processing:
12.7mm - 6.35mm (1/2" - 1/4")
84” (2134 mm) Vaughn
Inverted Tube Drop Block, Model 84-24-54, 84” working face,
48mm (1.9") after first draw
O.D.
0 - 2000 FPM (610 m/min.),
HP, Mitchell
Hydraulicdraw
Pointer, for 2” (50 mm) to ¾”
BronxMotor:
6CR2½37
Rotary
forultra-high
¼” - 7/8” (6
- 22 mm)
dia. tube,
6 Roll
38mm 450
(1.525")
after second
kW,Straightener,
45000 RPM
speed
levitation
motor
(19 mm) draw (12741)
Quantity: 4 separate lines
SCHUMAG MODEL IID/5 INTERMEDIATE COMBINED DRAWING
MACHINE
84” (2134
mm) Inverted Tube Drop Block, 110” (2794 mm) working face, 0 - 1980
Entry
O.D.: 43mm
FPM (600Maximum
m/min.), 450
HP, Mitchell
Hydraulic(1.692")
Pointer, for 2” (50 mm) to ¾” (19 mm) draw
(12742) Typical Entry Size: 38.7mm (1.525")
Typical Exit Size: 28.5mm (1.125")
SCHUMAG MODEL KZ-P-IIID COMBINATION DRAWING &
FINISHING MACHINE
Tube Size Range: 22mm - 47.6mm (0.875" - 1.875")
Cut length:
Straight: 3m or 6m (10 Ft. or 20 Ft.)
Coils: 15.25m - 30.5m (50 Ft. - 100 Ft.)
Mackintosh-Hemphill Rotary Straightener, for ½” - 2½” (12.7 - 63 mm) dia. tube, 6 Roll,
EFCO ROLLER HEARTH ANNEALING FURNACE
tables
continued next page 4
SCRAP CHOPPER
PACKAGING LINE
This semi-automated line made by Smurfit-Stone Container Systems
receives coils directly from the annealing furnace via conveyor. It places
the coil on a pre-formed box, folds the box and glues it. It then stacks
boxes and wraps the stack with plastic.
ASMAG COMPUTER CONTROLLED BASKET STORAGE AND
RETRIEVAL SYSTEM
Contact: John Conroy
john@machyintl.com Tel: (+1)-203-484-0400
For a list of other tube, wire and strip factories for sale plus over 700 individual
machines in stock, visit our website at www.machyintl.com
MRB Spinner Block
Bronx 6CR7
MRB Spinner Block
Annealed Coil Packaging Line, New 1993, automatically seals, boxes, stacks, weighs,
marks, and palletizes freshly annealed coils, to be sold with or without annealing furnace
PVC Coating Line ½” - 1” (12.7 - 25 mm) for straight lengths or coils
PVC Coating Line for ½” - 4” (12.7 - 101 mm) for straight lengths only
60” (1524 mm) Hedley Roller Hearth Annealing Furnace, Gas-Fired, 2 Zone for level
wound coils, layer wound coils or straight lengths, 3300 Lb./Hr. (1500 KG/Hr.)
48” (1220 mm) wide Roller Hearth Annealing Furnace, electric for coils or straight
lengths, 1330 Lb./Hr. (600 KG/Hr.)
FOUNDRY
Asarco Shaft Furnace, 10 Tons/Hr., 28 Ft., High Efficiency Melt Furnace with Pre-Heater
and afterburners
Asarco Continuous Caster with 15 Ton Gas-Fired Holding Furnace, single strand vertical
cast for up to 12” (305 mm) copper logs, flying saw with chip extraction, log elevator,
water cooling system and moulds for 9.65” (245 mm) and 10¾” (273 mm) copper logs
Semi-Continuous Caster for twin billets or single strand slab, 20 Ton Gas-Fired Holding
Furnace, for 39 Ft. (12 m) long billets of 11.8” (300 mm) dia. or slabs up to 37.4” (950
mm) wide, in-line billet/slab saw with 40” blade and 100 HP, powered exit conveyor, all
fed by shaft furnace.
PLUS
Complete Die Shop for grinding, polishing and re-sizing with Die Quips, lathes, grinders, etc.
Thousands of Carbide Dies & Plugs
Complete Laboratory with ARL Spectrometer, Tensile Testers, Hardness Testers, etc.
Saws, Scrap Choppers, Conveyors, Swagers, Push Pointers, Squeeze Pointers and MORE
For information, quotations or an inspection visit contact:
John Conroy, Machinery International Corporation - USA Tel: (+1) 203-484-0400 Fax: (+1) 203-484-4499 E-mail: john@machyintl.com Web: www.machyintl.com
A Complete Copper Rod and Tube Plant
using ‘Upcast’ Technology (10734)
Located in Mexico
This complete plant near Mexico City produces 4500 metric tons of copper tube and 5000 metric tons of copper rod annually. It can
be purchased for relocation or with the real-estate for a turnkey start-up on site. The equipment is very modern and has seen only
limited use. The building is modern and has ample spare land for expansion in a safe and clean industrial park.
The plant includes:
c Upward continuous caster for rod and tube up to 8 strands with a 5 Ton Induction Melting Furnace and a 3 Ton Induction
Holding Furnace
c Two Strand Tube Pilger Mill
c 4 x 5 Ton Drawbenches
c 4 x 3 Ton Drawbenches
c “Y” Type Dong Fang 12 Stand Rod Reducing Mill
c Waterbury Farrel Model 1-T 10 Die Wire Drawer
c Cincinnati Cathode Plate Shear
c Wire Drawers, Laboratory, Pointers and a large quantity of spare refractory for the Melt Furnace and Caster
Available only as a complete plant.
A GREAT INEXPENSIVE TURNKEY OPPORTUNITY!
For information, quotations or an inspection visit contact:
John Conroy, Machinery International Corporation - USA Tel: (+1) 203-484-0400 Fax: (+1) 203-484-4499 E-mail: john@machyintl.com Web: www.machyintl.com
COPPER TUBE MACHINERY FOR SALE
Located in Tunis, Tunisia
All Machines to be sold individually (Machines Run on 380/415 Volt, 50 Hz or DC SCR)
Matrasur I.D. Shot Blaster Cleaner for 6 mm - 60 mm (¼”- 2 ¼”) O.D. Tubes, New 1989 (12601)
50 Ton Trayvous Truck Scale, Model TY50, New 2002, Capacity 50 Tons (110,000 Lb.), In-ground
(12598)
Krollman HRA-4/65 Hydraulic Squeeze Pointers, 55 mm (2.16”) Maximum Tube O.D., 4 Die, 11 kW,
THREE AVAILABLE (12616/12617/12618)
1600 Ton Schloemann Oil Hydraulic Extrusion Press with Piercer, Gas-Fired Billet Furnace (New
1995), 3 x 240 kW Rexroth Hydraulic Pumps, Press Rebuilt in 2008, Air/Water Cooling Tables
(12577)
DRAWBENCHES
Stevens & Bullivant Rotary Swager, 65 mm (2 ½”) Max. Tube. O.D., Belt Type Rotary Swager, 15 kW
(12605)
Stevens & Bullivant Rotary Swager, 100 mm (4”) Max. Tube O.D., Belt Type Rotary Swager, 15 kW
(12606)
Carbide Dies and Plugs - Huge Inventory - Over 2500 Carbide Dies from 5mm to 50mm - Over
3800 Carbidge Plugs from 4mm to 44mm (12670)
COMPLETE COPPER FITTINGS DEPARTMENT
For Tees and Elbows (12604)(To Be Sold In One Lot) Including:
Yorkshire Hydraulic Tee End Forming Line, 10 mm - 60 mm (1/2” - 2 ¼”) O.D., New 2000, Suitable
for Copper or Stainless Tubes, Mitsubishi Electrics installed New in 2011 (12599)
100,000 Lb. (50 Ton) Aetna Standard 3 Die Drawbench, 100 Ft. (30 m) Draw, 3” (76 mm) O.D.
Maximum Tube, 1” (24 mm) Minimum Finish Draw, 280 kW, SCR Thyristor Controls, Variable Speed,
Barrel Rollover Feed, Single Chain (12584)
65,000 Lb. (30 Ton) Montbard 3 Die Drawbench, 118 Ft. (36 m) Draw, 1 5/8” (42 mm) Maximum
Incoming O.D., 1” (24 mm) Minimum O.D., 450 kW D.C. Variable Speed with SCR Thyristor Drive,
Single Chain (12585)
DRAWBLOCKS
84” (2134 mm) Marshall Richards Model VNCB 84 Spinner Block, 300 HP D.C. Drive, 0-938 m/Min.
(3077 FPM) Draw Speed, 44 mm - 6 mm (1.75”- 0.236”) Tube Draw, 8 Basket Carrousel, 7.2 Ton
Draw Pull (12586)
84” (2134 mm) Marshall Richards Model VNCB 84 Spinner Block, 350 kW D.C., 0-1100 m/Min. (03600 FPM), 48 mm - 6 mm (1.9”- 0.236”) Tube Draw, Basket Conveyor, 8 Ton Draw Pull (12587)
54” (1370 mm) Marshall Richards Model H4T Horizontal Tube Drawing Blocks, 48mm (1.875”)
Maximum Entry O.D., 6 mm (0.236”) Minimum Finish O.D., 0-405 m/Min. (0-1330 FPM),
10 Ton Pull, 113 kW D.C. Drive w/Telemecanique SCR Thyristor Drive THREE AVAILABLE
(12588/12589/12590)
SCHUMAG COMBINED DRAWING MACHINES (6 AVAILABLE)
Schumag KZ-P-1B, 4 mm - 25 mm (0.157”- 1”), 0-60 m/Min. (0-200 FPM), 75 HP, 3 Ton Pull, 6 m
(20 Ft.) Maximum Cut Length, w/Coiler (12591)
Elbowmatic Copper Tube Elbow Bending Machine, New 1992, Max. O.D. 28 mm (1 Tube) or 18 mm
(2 Tubes) for 45/90/180 Degree Elbow Bends, SCR Controls, Automatic Cycle, w/Tooling (12641)
Cirrus Tee & Elbow Calibrating Machines, New 2000, for 10 mm - 60 mm (3/8”- 2 ¼”) O.D., TWO
AVAILABLE - One used for Tees, One used for Elbows (12642)
Adiga Sala Automatic Tube Cutting Saws for 10 mm - 32 mm (3/8”- 1 ¼”), New 1995, 380 V., 50
Hz, TWO AVAILABLE (12644/12652)
Walther Trowal Model CD 400-PN Table Cleaning Machine, New 1997, 420 Litre (110 Gal.)
Capacity, 10 mm - 60 mm (0.4”- 2.36”) O.D., Copper or Stainless (12646)
Comcount Automatic Copper Fittings Line to Weigh, Package, Label and Seal Tees and Elbows into
Plastic Bags, New 1999, 380 V., 50 Hz (12647)
Cirrus Semi-Automatic Tube End Chamfering Machine for 12 mm - 32 mm (1/2”- 1 ¼”), Siemens
SCR Controls, New 1995 (12645)
Semi-Automatic Tube End Cutting Machine (12643)
Parts/Fittings Drier for Copper or Stainless Tees and Elbows (12648)
ALL MACHINES ARE INSTALLED. DISMANTLING AND LOADING COSTS AVAILABLE. PLANT
LOCATED IN TUNISIA. MACHINES MAY BE SOLD “AS IS, WHERE IS”, OR F.O.B. PORT.
TUBE MACHINES FOR SALE AT OTHER LOCATIONS
Schumag KZ-R-1S, 4 mm - 25 mm (0.157”- 1”), 15-50 m/Min. (0-200 FPM), 50 HP (37 kW), 4
Ton Pull, 3 - 6 m (10 - 20 Ft.) Cut Lengths, w/Coiler (12592)
Schumag KZ-P-1S, 4 mm - 25 mm (0.157”- 1”), 0-60 m/Min. (0-200 FPM), 75 HP (55 kW), 3 Ton
Pull, No Coiler (12593)
Schumag KZ-P-1S, 6 mm - 28 mm (0.236”- 1.1”), 15-60 m/Min. (50-200 FPM), 75 HP (55 kW), 3
m - 6 m (10-20 Ft.) Length, 3 Ton Pull, No Coiler TWO AVAILABLE (12594/12595)
Schumag KZP-1B/5, 6 mm - 28mm (0.236”- 1.1”), 0-60 m/Min. (0-200 FPM), 75 HP (55 kW), 3
Ton Pull w/Coiler (12596)
OTHER MACHINES AT THIS PLANT
Ripoche Roller Hearth Annealing Furnace for Copper Coils, 3 Zone, Gas-Fired, New 1995, 1450
mm (57”) Hearth Width, Radiant Tube, Maximum Temp. 650 Deg. C (1200 Deg. F), Water Cooling
(12597)
Automated Solutions Straight Length Tube Bundling Machine, New 2000, Tube Range 9.5 mm 54 mm (3/8”- 2”) O.D., 3 - 6 m (10-20 Ft.) Lengths, Hopper Load 4535 Kg (10,000 Lb.) Max.,
Descrambler, Vertical Tube Magazine, 5 Taping Heads, 4 Rotating Heads (12603)
4500 Ton Schloemann Oil Hydraulic Indirect Extrusion Press for Tube or Rod, Straight Lengths or
Coils, with Elhaus Gas-Fired Billet Furnace, Dual Ajax Magnathermic 50 m Walking Beam Cooling
Table, Dual Rod Coilers (10785)
T-Drill Model TCC-50-EF20 Tube End Finishing Machine w/Cutoff and End Forming for Copper or
Aluminum Flanges, Collars, Notches, etc. up to 22 mm (7/8”) O.D. (10963)
2” (50 mm) Mitchell Hydraulic Tube Push Pointer (11228)
We Have Hundreds of Machines Worldwide Including:
Extrusion Presses ● Billet Casting Lines ● Drawbenches ● Drawblocks ● Swagers ● Saws ●—–‘ơ•● Straighteners ● End Formers
Do you have surplus machines you want to sell? We want to buy them!
ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER
For Further Information Contact:
John Conroy, Machinery International Corporation - USA Tel: (+1) 203-484-0400 Fax: (+1) 203-484-4499 E-mail: john@machyintl.com Web: www.machyintl.com
Machinery
International
Corp.
Machinery
BUYING,
SELLING, AND APPRAISING
USED METALWORKING MACHINERY
International
Corp.
20 Commerce Dr.
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Dr.
Fax: 20
+1 Commerce
203-484-4499
North Branford,
CT 06471 USA
sales@machyintl.com
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Located
in USA
BUYING,MODERN
SELLING, AND
APPRAISING
USED
METALWORKING
MACHINERY
ULTRA
COPPER
TUBE
PLANT
FOR SALE
(12291)
Machinery International Corporation is proud to offer for sale this fully automated copper tube factory using state-of-the-art
ULTRA
TUBE
SALEto (12291)
technology in all MODERN
aspects of productionCOPPER
and material handling.
This fullyPLANT
integrated plant FOR
from melting/casting
finish product
uses
cast and
roll technology
to produce
1815tometric
tons
(4,000,000
pounds) percopper
monthtube
of the
highest
quality
copper tube for
Machinery
International
Corporation
is proud
offer for
sale
this fully automated
factory
using
state-of-the-art
the
water/plumbing
industry
and inner groove
copperhandling.
tubing forThis
the fully
ACRintegrated
air conditioning
and melting/casting
refrigeration industry.
technology
in all aspects
of production
and material
plant from
to finish product
uses
cast andwere
roll technology
produce
1815 by
metric
tons (4,000,000
pounds)
per monthincluding
of the highest
copper tube for
All
machines
produced into2001
or newer
the world's
best known
manufacturers,
SMS,quality
MRB Schumag,
the
water/plumbing
industry
and
inner groove
copper
tubing
forproduction
the ACR air
conditioning
and
refrigeration
Induga
Furnaces, and
Asmag
material
handling
systems.
The
flow
is computer
controlled,
and industry.
all product travels
from
machine-were
to-machine
in in
payoff
that
controlled.
All machines
produced
2001baskets
or newer
byare
the CNC
world's
best known manufacturers, including SMS, MRB Schumag,
Induga
Furnaces,
Asmag material
handling
systems.
Themodern
production
flow is computer
controlled,
andofallnew.
product
travels
This
is an
excellentand
opportunity
to purchase
the world's
most
technology
at a fraction
of the cost
The sale
from
machineto-machine
in payoff
that
areallCNC
controlled. are available for technical support and spare parts.
includes
all necessary
hardware
andbaskets
software,
and
manufacturers
This
is an excellent MACHINES
opportunity toWILL
purchase
world's
most modern technology
at a IS
fraction
of the
cost of
NO INDIVIDUAL
BE the
SOLD
SEPARATELY.
THIS PLANT
BEING
SOLD
ASnew.
A The sale
includes
all
necessary
hardware
and
software,
and
all
manufacturers
are
available
for
technical
support
and
spare
parts.
COMPLETE PLANT ONLY FOR EXPORT OUTSIDE OF NORTH AMERICA.
NO INDIVIDUAL MACHINES WILL BE SOLD SEPARATELY. THIS PLANT IS BEING SOLD AS A
COMPLETE PLANT ONLY FOR EXPORT OUTSIDE OF NORTH AMERICA.
INDIVIDUAL MACHINE CHARACTERISTICS
SMS MEER HORIZONTAL CONTINUOUS CASTING PLANT
SCHUMAG MODEL RFS STRAIGHTEN, CUT, COIL, TEST &
CHARACTERISTICS
SMS Meer Cathode Charging System INDIVIDUAL MACHINEMARKING
FINISHING MACHINE
Two 900 kW, 8 Ton Induga Channel Melting Furnaces
Tube size: 6mm - 30mm (0.236" - 1.18")
SMS
CONTINUOUS
CASTING
PLANT
350MEER
kW, 10HORIZONTAL
Ton Induga Pressurized
holding
furnace (and
spare furnace) SCHUMAG MODEL RFS STRAIGHTEN, CUT, COIL, TEST &
SMS
Charging
System
MARKING
FINISHING
MACHINE
SMS Meer
Meer Cathode
Four Strand
Withdrawal
Train with two separate withdraw
2134mm (84")
SMS MEER
SPINNER BLOCK
Two
900
8 Ton101mm
Induga(4")
Channel
Tube
- 30mm
drives
to kW,
produce
tube Melting Furnaces
Modelsize:
No.:6mm
45 TVC
2000(0.236" - 1.18")
350
kW,
10
Ton
Induga
Pressurized
holding
furnace
(and
spare
furnace)
Maximum Tube Weight: 1080 Kg (2381 Lbs.)
Maximum shell: 35mm x 1.75mm (1.378" x 0.070") Wall
SMS Meer Four Strand Withdrawal Train with two separate withdraw
2134mm
SPINNER
Speed: (84")
250 - SMS
1500 MEER
m/min (820
- 4920BLOCK
FPM)
drives
to produce
101mm (4")
tube
Model No.: 45 TVC 2000
SMS
MEER
TUBE MILLING
MACHINE
Maximum Tube Weight: 1080 Kg (2381 Lbs.)
Maximum shell:IN-LINE
35mm xCOIL
1.75mm
(1.378"
x 0.070") Wall
INDUCTOHEAT
TO COIL
ANNEALING
FURNACE
Speed:
250 - 1500
m/min
(820 -(0.35"
4920 -FPM)
SMS MEER HRM 100 HIGH REDUCTION MILL
Tube
diameter:
9.0mm
- 10mm
0.40")
SMS
MEER
MILLING
Main
drive:TUBE
2 x 428kW
(574MACHINE
HP) DC
Wall: 0.21mm - 0.6mm (0.008" - 0.0236")
INDUCTOHEAT
IN-LINE (984
COILFPM)
TO COIL ANNEALING FURNACE
Superimpose drive: 1 x 428 kW (574 HP) DC
Line speed: 300m/min.
SMS
MEER
HRM- 100
HIGH REDUCTION
MILL
Tube diameter: 9.0mm - 10mm (0.35" - 0.40")
Feed:
1194mm
1270mm/Min.
(47 - 50 ipm)
@ (4" O.D. shell x 1" wall)
Main
drive:
x 428kW
(574Ft.)
HP)
DC x 57mm (2.25") O.D. x 3.175mm
Wall:SCHUMAG
0.21mm - 0.6mm
0.0236")
Output
tube2is:
201m (660
Long
MRB
MODEL(0.008"
VNVG- 2000
INNER GROOVING
Superimpose
Line speed:(4300m/min.
(984 FPM)
(0.125")
Wall drive: 1 x 428 kW (574 HP) DC
MACHINES
ea)
Feed:
- 1270mm/Min.
(47 - 50inipm)
O.D. shell x 1" wall)
907 Kg1194mm
(2,000 Lbs.)
shell is processed
13 -@14(4"
minutes.
Draw force maximum: 8 kN
Output tube is: 201m (660 Ft.) Long x 57mm (2.25") O.D. x 3.175mm
MRB
SCHUMAG
MODEL
VNVG
2000
INNER GROOVING
Maximum
Speed:
125m/Min.
(410
FPM)
(0.125")
Wall
MACHINES
(4 ea)Grooving Speed: 100m/Min. (325 FPM)
SCHUMAG MODEL IIB/12 AND IIB/8 DOUBLE COMBINED DRAWING
Maximum Inner
907 Kg (2,000 Lbs.) shell is processed in 13 - 14 minutes.
Draw forceinlet:
maximum:
8 kN
MACHINE
Maximum
16.3 mm
O.D. (0.642")
Maximum
Speed:
125m/Min.
(410 FPM) 12.7mm - 6.35mm (1/2" - 1/4")
Tube size: 54mm (2.125") at entry
Range of inner
groove
tube processing:
SCHUMAG MODEL
IIB/12
AND
IIB/8
DOUBLE COMBINED DRAWING
Maximum
Inner Grooving Speed: 100m/Min. (325 FPM)
48mm (1.9")
after
first
draw
O.D.
MACHINE 38mm (1.525") after second draw
Maximum
inlet:45000
16.3 mm
O.D.
(0.642")
Motor: 37 kW,
RPM
ultra-high
speed levitation motor
Tube size: 54mm (2.125") at entry
Range of 4inner
groove
tube processing: 12.7mm - 6.35mm (1/2" - 1/4")
Quantity:
separate
lines
48mm (1.9")
first draw
O.D.
SCHUMAG MODEL
IID/5after
INTERMEDIATE
COMBINED DRAWING
Motor:
37 kW, 45000
RPM
ultra-high speed
levitation motor
MACHINE 38mm (1.525") after second draw
EFCO
ROLLER
HEARTH
ANNEALING
FURNACE
Quantity: 4 separate lines
Maximum Entry O.D.: 43mm (1.692")
SCHUMAG
MODEL
INTERMEDIATE
COMBINED DRAWING
Typical Entry
Size: IID/5
38.7mm
(1.525")
SCRAP CHOPPER
MACHINE
EFCO ROLLER HEARTH ANNEALING FURNACE
Typical Exit Size: 28.5mm (1.125")
Maximum Entry O.D.: 43mm (1.692")
PACKAGING LINE
Typical Entry
Size: KZ-P-IIID
38.7mm (1.525")
SCRAP
CHOPPER line made by Smurfit-Stone Container Systems
SCHUMAG
MODEL
COMBINATION DRAWING &
This semi-automated
Typical Exit
Size: 28.5mm (1.125")
FINISHING
MACHINE
receives coils directly from the annealing furnace via conveyor. It places
PACKAGING
LINE
Tube Size Range: 22mm - 47.6mm (0.875" - 1.875")
the coil on a pre-formed
box, folds the box and glues it. It then stacks
SCHUMAG
This
semi-automated
line made
by Smurfit-Stone Container Systems
Cut length:MODEL KZ-P-IIID COMBINATION DRAWING &
boxes
and wraps the stack
with plastic.
FINISHING
MACHINE
receives
coils
directly
from
the annealing furnace via conveyor. It places
Straight: 3m or 6m (10 Ft. or 20 Ft.)
Tube
Range:
22mm
47.6mm
(0.875" - 1.875")
the coil on
a pre-formed
box, folds the box
and glues
it. It then
stacks
Coils:Size
15.25m
- 30.5m
(50 -Ft.
- 100 Ft.)
ASMAG
COMPUTER
CONTROLLED
BASKET
STORAGE
AND
Cut length:
boxes
and wraps
the stack with plastic.
RETRIEVAL
SYSTEM
Straight: 3m or 6m (10 Ft. or 20 Ft.)
Coils: 15.25m - 30.5m (50 Ft. - 100 Ft.)
ASMAG COMPUTER CONTROLLED BASKET STORAGE AND
Contact: JohnRETRIEVAL
ConroySYSTEM
john@machyintl.com Tel: (+1)-203-484-0400
Contact: John Conroy
john@machyintl.com
Tel: (+1)-203-484-0400
For a list of other tube, wire and strip factories
for sale plus over 700 individual
machines in stock, visit our website at www.machyintl.com
For a list of other tube, wire and strip factories for sale plus over 700 individual
machines in stock, visit our website at www.machyintl.com