glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Personal guide for:
EMail: Product category: glasstec.01 - Glass production/Production Technology
Search Criteria:
•
•
•
•
•
•
•
•
Company Figures
Company Profile
Contact Persons
Exhibitors with address and hall location
Hall map for each exhibitor
News / Product News
Product groups with descriptions and illustrations
main_prod_no
Messe Düsseldorf GmbH
Postfach 101006
40001 Düsseldorf
Germany
Tel. +49 (0)221 / 45 60-01
Fax +49 (0)221 / 45 60-668
www.messe-duesseldorf.de
© 2010 Messe Düsseldorf GmbH
1
© 2010 Messe Düsseldorf GmbH
2
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Contents
1 Exhibitors . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1
A & L Rondot S.A.S . . . . . . . . . . . . . . . . . .
1.2
Aachener Chemische Werke GmbH . . . . . . . . .
1.3
Advantech S.p.A. . . . . . . . . . . . . . . . . . . .
1.4
AEG Power Solutions GmbH . . . . . . . . . . . . .
1.5
AEROGAS GmbH . . . . . . . . . . . . . . . . . . .
1.6
AGC Ceramics Co., Ltd. . . . . . . . . . . . . . . .
1.7
AGK Hochleistungswerkstoffe GmbH . . . . . . . .
1.8
Air Products . . . . . . . . . . . . . . . . . . . . . .
1.9
ALBAT+WIRSAM Software AG . . . . . . . . . . .
1.10 Alfaref GmbH . . . . . . . . . . . . . . . . . . . . .
1.11 All Glass S.r.l. . . . . . . . . . . . . . . . . . . . . .
1.12 AMBEG Dr. J. Dichter GmbH . . . . . . . . . . . .
1.13 Antonini S.r.l. . . . . . . . . . . . . . . . . . . . . .
1.14 apb antonio piazza brevetti s.r.l. . . . . . . . . . . .
1.15 ARC Glass Melting Solutions . . . . . . . . . . . . .
1.16 Area Impianti S.p.A. . . . . . . . . . . . . . . . . . .
1.17 ASCO Numatics GmbH . . . . . . . . . . . . . . . .
1.18 Athena Engineering & Construction . . . . . . . . .
1.19 Avaluxe International GmbH . . . . . . . . . . . . .
1.20 AYROX SCRL . . . . . . . . . . . . . . . . . . . . .
1.21 Barbaric GmbH . . . . . . . . . . . . . . . . . . . .
1.22 BDF INDUSTRIES S.p.A. . . . . . . . . . . . . . .
1.23 Becker Lehr Loader GmbH . . . . . . . . . . . . . .
1.24 Bekintex N.V. . . . . . . . . . . . . . . . . . . . . .
1.25 Benteler Maschinenbau GmbH . . . . . . . . . . .
1.26 BERNARD & BONNEFOND . . . . . . . . . . . . .
1.27 Bock Energietechnik . . . . . . . . . . . . . . . . .
1.28 Bohemia Machine s.r.o. . . . . . . . . . . . . . . . .
1.29 Bosch Rexroth AG Antriebstechnik Zahnkette . . .
1.30 Bottero S.p.A., Hollow Glass . . . . . . . . . . . . .
1.31 Brookshaw Reed (Singapore) Pte. Ltd. . . . . . . .
1.32 BROTHER GLASS MOULD Co., Ltd. . . . . . . . .
1.33 BURAKCAN KALIP SANAYI VE TICARET LTD. STI
1.34 Bystronic Armatec GmbH . . . . . . . . . . . . . . .
1.35 Bystronic Maschinen AG . . . . . . . . . . . . . . .
1.36 C.RE.F.IN. S.r.l. . . . . . . . . . . . . . . . . . . . .
1.37 CAR-MET S.p.A. . . . . . . . . . . . . . . . . . . .
1.38 Carborundum Universal Limited . . . . . . . . . . .
© 2010 Messe Düsseldorf GmbH
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
9
9
12
13
16
17
18
19
22
25
33
34
38
40
45
48
52
53
55
58
60
62
63
66
67
69
71
72
74
78
82
85
86
87
88
101
113
114
117
3
1.39
1.40
1.41
1.42
1.43
1.44
1.45
1.46
1.47
1.48
1.49
1.50
1.51
1.52
1.53
1.54
1.55
1.56
1.57
1.58
1.59
1.60
1.61
1.62
1.63
1.64
1.65
1.66
1.67
1.68
1.69
1.70
1.71
1.72
1.73
1.74
1.75
1.76
1.77
1.78
1.79
1.80
Cestaro srl . . . . . . . . . . . . . . . . . . . . . . . .
Changshu Jianhua Die Sets Co., Ltd. . . . . . . . . .
Changshu Jinggong Mould Mfg. Co., Ltd. . . . . . . .
Changshu Shinan Mould Co., Ltd . . . . . . . . . . .
Changshu Weiheng Mould Manufacture Co., Ltd. . .
Cimec Oy . . . . . . . . . . . . . . . . . . . . . . . .
CNUD-EFCO INTERNATIONAL SA/NV . . . . . . . .
CO.MI.T S.r.l. . . . . . . . . . . . . . . . . . . . . . .
Commersald Impianti S.r.l. . . . . . . . . . . . . . . .
Condat . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTEX GmbH, HM-Verschleißtechnik . . . . . . .
Control & Heating Systems, Dipl.-Ing. Rainer Pilz . .
Cugher Glass S.r.l. . . . . . . . . . . . . . . . . . . .
De Raedt Industrial Fans . . . . . . . . . . . . . . . .
DMA Maschinen- und Anlagenbau GmbH & Co. KG .
Dornbusch Gravuren GmbH . . . . . . . . . . . . . .
DSF Refractories & Minerals Ltd. . . . . . . . . . . .
DuPont de Nemours International S.A. . . . . . . . .
Dura Temp Corporation . . . . . . . . . . . . . . . . .
E.ITEC S.A.S. . . . . . . . . . . . . . . . . . . . . . .
E.W. Bowman, Inc. . . . . . . . . . . . . . . . . . . .
Eclipse, Inc. . . . . . . . . . . . . . . . . . . . . . . .
Eirich GmbH & Co. KG, Gustav, Maschinenfabrik . .
Eirich GmbH & Co. KG, Gustav, Maschinenfabrik . .
Electroglass Ltd. . . . . . . . . . . . . . . . . . . . . .
ELIAR ELEKTRONIK A.S. . . . . . . . . . . . . . . .
Elmag S.p.A. . . . . . . . . . . . . . . . . . . . . . . .
EME Maschinenfabrik Clasen GmbH . . . . . . . . .
Emhart Glass S.A. . . . . . . . . . . . . . . . . . . .
EMMETI . . . . . . . . . . . . . . . . . . . . . . . . .
EMP GmbH . . . . . . . . . . . . . . . . . . . . . . .
Ernst Pennekamp GmbH & Co. oHG . . . . . . . . .
Essemce AB . . . . . . . . . . . . . . . . . . . . . . .
EUROMATIC S.r.l. . . . . . . . . . . . . . . . . . . . .
Eurostar Concrete Technology S.p.A. . . . . . . . . .
euroTECH GmbH . . . . . . . . . . . . . . . . . . . .
EWK Umwelttechnik GmbH . . . . . . . . . . . . . .
Excelsius Global Services GmbH . . . . . . . . . . .
F.O.R.T.E. Srl . . . . . . . . . . . . . . . . . . . . . .
Falorni Gianfranco srl . . . . . . . . . . . . . . . . . .
Fejmert Mixer AB . . . . . . . . . . . . . . . . . . . .
Ferro Corporation, Glass Systems Division . . . . . .
© 2010 Messe Düsseldorf GmbH
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
118
119
121
122
123
124
128
129
130
131
133
134
137
138
140
142
143
145
148
150
151
152
154
156
158
160
160
163
165
167
169
171
172
174
176
178
181
183
184
187
189
191
4
1.81
1.82
1.83
1.84
1.85
1.86
1.87
1.88
1.89
1.90
1.91
1.92
1.93
1.94
1.95
1.96
1.97
1.98
1.99
1.100
1.101
1.102
1.103
1.104
1.105
1.106
1.107
1.108
1.109
1.110
1.111
1.112
1.113
1.114
1.115
1.116
1.117
1.118
1.119
1.120
1.121
1.122
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
FIB Belgium s.a. . . . . . . . . . . . . . . . . . . . . . .
Fickert & Winterling, Maschinenbau GmbH . . . . . . .
Fima - Olimpia Fonderie S.p.A. . . . . . . . . . . . . .
Fives Stein Ltd. . . . . . . . . . . . . . . . . . . . . . .
Fonderie Bartalesi S.r.l. . . . . . . . . . . . . . . . . . .
FONDERIE VALDELSANE S.p.A. . . . . . . . . . . . .
FOR G, s.r.o. . . . . . . . . . . . . . . . . . . . . . . .
Forma Glas GmbH . . . . . . . . . . . . . . . . . . . .
Franke Industrieofen-Service GmbH . . . . . . . . . .
FTW Werner Würth GmbH . . . . . . . . . . . . . . . .
G-LEHRS . . . . . . . . . . . . . . . . . . . . . . . . .
Gedevelop AB . . . . . . . . . . . . . . . . . . . . . . .
George Lane & Sons Ltd . . . . . . . . . . . . . . . . .
Giancarlo Perego S.p.A. . . . . . . . . . . . . . . . . .
GLAMACO Maschinenbau GmbH . . . . . . . . . . . .
Glashüttentechnik-Glasofenbau . . . . . . . . . . . . .
GLASMA AB . . . . . . . . . . . . . . . . . . . . . . . .
Glass Service Inc. . . . . . . . . . . . . . . . . . . . . .
Glass Technologies S.r.l. . . . . . . . . . . . . . . . . .
Glass Technology International GmbH . . . . . . . . .
GLASSWORKS HOUNSELL LIMITED . . . . . . . . .
Global Bottling . . . . . . . . . . . . . . . . . . . . . . .
Go To s.a. . . . . . . . . . . . . . . . . . . . . . . . . .
GPM-Glass Project Management and Used Equipment
GPS Glasproduktions-Service GmbH . . . . . . . . . .
GRAFIX GmbH . . . . . . . . . . . . . . . . . . . . . .
Grafotec Spray Systems GmbH . . . . . . . . . . . . .
Graphoidal Developments Ltd . . . . . . . . . . . . . .
Grenzebach Maschinenbau GmbH . . . . . . . . . . .
Grenzebach Maschinenbau GmbH . . . . . . . . . . .
Hager Sondermaschinenbau GmbH . . . . . . . . . . .
Heavydrive, Günter Übelacker Inh. . . . . . . . . . . .
HEGLA GmbH & Co. KG . . . . . . . . . . . . . . . . .
Henan Chief Way Industry Co., LTD. . . . . . . . . . .
Heye International GmbH . . . . . . . . . . . . . . . . .
HORN Glass Industries AG . . . . . . . . . . . . . . .
Hotwork International AG . . . . . . . . . . . . . . . . .
Huanghua Rongtai Mould Co., Ltd. . . . . . . . . . . .
Hubtex Maschinenbau GmbH & Co. KG . . . . . . . .
Hydrogenics Europe NV . . . . . . . . . . . . . . . . .
HyGear BV . . . . . . . . . . . . . . . . . . . . . . . . .
IfG - Ingenieurbüro für Glastechnik GmbH . . . . . . .
© 2010 Messe Düsseldorf GmbH
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
194
195
197
198
200
202
203
205
207
209
211
215
217
218
219
226
228
229
232
235
236
238
240
241
242
245
246
253
255
264
269
270
271
275
276
279
282
283
284
285
287
288
5
1.123
1.124
1.125
1.126
1.127
1.128
1.129
1.130
1.131
1.132
1.133
1.134
1.135
1.136
1.137
1.138
1.139
1.140
1.141
1.142
1.143
1.144
1.145
1.146
1.147
1.148
1.149
1.150
1.151
1.152
1.153
1.154
1.155
1.156
1.157
1.158
1.159
1.160
1.161
1.162
1.163
ilis gmbh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inspection Systems . . . . . . . . . . . . . . . . . . . . . . . .
INTCO GmbH . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTERGLASS . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interprojekt GmbH . . . . . . . . . . . . . . . . . . . . . . . . .
ITALCARRELLI . . . . . . . . . . . . . . . . . . . . . . . . . .
IWG Ingenieurbüro Wagenbauer Glasofenbau GmbH . . . . .
JCL Engineering Pte Ltd . . . . . . . . . . . . . . . . . . . . .
JUTEC® Hitzeschutz GmbH . . . . . . . . . . . . . . . . . . .
Kaltun Mining Co. . . . . . . . . . . . . . . . . . . . . . . . . .
KANTHAL, Sandvik Heating Technology AB . . . . . . . . . .
Kararmaz Kalip San. ve Tic. Ltd. Sti. . . . . . . . . . . . . . .
Keraglass Engineering S.r.l. . . . . . . . . . . . . . . . . . . .
King’s Metal Fiber Technologies Co., Ltd. . . . . . . . . . . . .
KREISEL GmbH & Co. KG . . . . . . . . . . . . . . . . . . . .
KTG Engineering Ltd. . . . . . . . . . . . . . . . . . . . . . . .
Kurt Merker GmbH . . . . . . . . . . . . . . . . . . . . . . . .
Körting Hannover AG, Bereich W, Industrie- u. Prozesswärme,
Feuerungstechnik . . . . . . . . . . . . . . . . . . . . . . . . .
Lahti Precision Oy . . . . . . . . . . . . . . . . . . . . . . . . .
Langendorf GmbH . . . . . . . . . . . . . . . . . . . . . . . .
Langendorf GmbH . . . . . . . . . . . . . . . . . . . . . . . .
Lansing Unitra GmbH . . . . . . . . . . . . . . . . . . . . . . .
LAT Maschinen + Antriebstechnik GmbH & Co. KG . . . . . .
Lattimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lincoln GmbH, Zentralschmiersysteme . . . . . . . . . . . . .
Linn High Therm GmbH . . . . . . . . . . . . . . . . . . . . .
Logistic System Pichler GmbH . . . . . . . . . . . . . . . . . .
LT GASETECHNIK GmbH & Co. KG . . . . . . . . . . . . . .
Luoyang Dayang Refractory Co., Ltd. . . . . . . . . . . . . . .
LWN Lufttechnik GmbH . . . . . . . . . . . . . . . . . . . . . .
Löwinger GmbH, Glasbearbeitungsmaschinenbau . . . . . . .
M.T. Forni Industriali S.r.l. . . . . . . . . . . . . . . . . . . . . .
Maquinas Argentinas del Vidrio S.A. (MAVSA) . . . . . . . . .
Maschinenbau GEROLD GmbH & Co. KG . . . . . . . . . . .
McGill AirClean . . . . . . . . . . . . . . . . . . . . . . . . . .
Merkad Makina Kalip San. Ve Tic. Ltd. Sti. . . . . . . . . . . .
Merkle International, Inc. . . . . . . . . . . . . . . . . . . . . .
MERSEN France Gennevilliers S.A.S. . . . . . . . . . . . . .
Messersi’ Packaging S.r.l. . . . . . . . . . . . . . . . . . . . .
METAL INDUSTRIEL de CHAUNY . . . . . . . . . . . . . . .
Metavil - Empresa Transformadora Metalo Vidreira, Lta. . . .
© 2010 Messe Düsseldorf GmbH
291
293
294
295
297
300
301
304
306
308
309
311
311
313
315
318
320
322
325
328
333
334
335
337
339
342
344
345
347
347
348
350
351
352
353
354
357
359
361
362
363
6
1.164
1.165
1.166
1.167
1.168
1.169
1.170
1.171
1.172
1.173
1.174
1.175
1.176
1.177
1.178
1.179
1.180
1.181
1.182
1.183
1.184
1.185
1.186
1.187
1.188
1.189
1.190
1.191
1.192
1.193
1.194
1.195
1.196
1.197
1.198
1.199
1.200
1.201
1.202
1.203
1.204
1.205
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
METRA . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Modell- und Formenbau Ekkehart Krahl . . . . . . . . . .
Mopavid, S.L. . . . . . . . . . . . . . . . . . . . . . . . .
MOTIM Fused Cast Refractories Ltd. . . . . . . . . . . .
MSC & SGCC . . . . . . . . . . . . . . . . . . . . . . . .
MSK Verpackungs-Systeme GmbH . . . . . . . . . . . .
Nabertherm GmbH . . . . . . . . . . . . . . . . . . . . .
Nanjing Xinshu Machinery Co., Ltd. . . . . . . . . . . . .
New Hudson Corporation . . . . . . . . . . . . . . . . . .
Nikolaus Sorg GmbH + Co. KG . . . . . . . . . . . . . .
Nirvana Technologies (P) Ltd. . . . . . . . . . . . . . . .
Norddeutsche Seekabelwerke GmbH . . . . . . . . . . .
North American Refractories Company . . . . . . . . . .
NovoCOS GmbH . . . . . . . . . . . . . . . . . . . . . .
OCL India Limited . . . . . . . . . . . . . . . . . . . . . .
OCMI-OTG S.p.A. . . . . . . . . . . . . . . . . . . . . . .
OFFICINA MECCANICA SESTESE S.p.A. . . . . . . . .
Olivotto Glass Technologies S.p.A. . . . . . . . . . . . .
Omco International N.V. . . . . . . . . . . . . . . . . . .
Optima S.r.l. . . . . . . . . . . . . . . . . . . . . . . . . .
Ori-Mould Technology Co., Ltd., Su Zhou . . . . . . . . .
P-D Refractories GmbH . . . . . . . . . . . . . . . . . .
Pannkoke Flachglastechnik GmbH . . . . . . . . . . . .
Parkinson-Spencer Refractories Ltd. . . . . . . . . . . .
Pemat Mischtechnik GmbH . . . . . . . . . . . . . . . .
PEMCO International, c/o PEMCO Emails S.r.l. . . . . .
Plansee Metall GmbH . . . . . . . . . . . . . . . . . . . .
Pneumofore S.p.A. . . . . . . . . . . . . . . . . . . . . .
PT. Dyson Zedmark Indonesia . . . . . . . . . . . . . . .
Putsch Meniconi S.p.A. . . . . . . . . . . . . . . . . . . .
Pyrotek Engineering Materials Ltd. . . . . . . . . . . . .
Rath AG . . . . . . . . . . . . . . . . . . . . . . . . . . .
REDWAVE - a trademark of BT-Wolfgang Binder GmbH
Refmon Zrt. . . . . . . . . . . . . . . . . . . . . . . . . .
RHI Glas GmbH . . . . . . . . . . . . . . . . . . . . . . .
ROHDE GmbH . . . . . . . . . . . . . . . . . . . . . . .
RoMan Manufacturing, Inc. . . . . . . . . . . . . . . . . .
Romeca . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ruitai Materials Technology Co., Ltd. . . . . . . . . . . .
RUREX-STAHL, Dr. Otto Kukla GmbH . . . . . . . . . .
S.I.G.M.A. S.r.l. . . . . . . . . . . . . . . . . . . . . . . .
Saint-Gobain SEFPRO . . . . . . . . . . . . . . . . . . .
© 2010 Messe Düsseldorf GmbH
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
364
365
366
367
369
371
374
377
377
379
380
382
384
386
387
389
389
391
410
411
412
413
415
424
427
431
432
436
438
439
443
443
445
448
449
450
452
455
457
458
459
460
7
1.206
1.207
1.208
1.209
1.210
1.211
1.212
1.213
1.214
1.215
1.216
1.217
1.218
1.219
1.220
1.221
1.222
1.223
1.224
1.225
1.226
1.227
SCHRADER Glasformenbau GmbH & Co. KG . . . . . . . . .
SCHUPP Industriekeramik GmbH & Co. KG . . . . . . . . . .
Sheppee International Ltd . . . . . . . . . . . . . . . . . . . .
Sklostroj Turnov CZ, s.r.o. . . . . . . . . . . . . . . . . . . . .
SMT Lager- und Transportsysteme GmbH . . . . . . . . . . .
SOFTSOLUTION GmbH . . . . . . . . . . . . . . . . . . . . .
Sogelub S.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPECIAL CERAMICS Pvt. Ltd. . . . . . . . . . . . . . . . . .
Stewart Engineers . . . . . . . . . . . . . . . . . . . . . . . . .
STG - Software & Technologie Glas GmbH . . . . . . . . . . .
Talamoni s.n.c. . . . . . . . . . . . . . . . . . . . . . . . . . .
Tekimex International A.p.s. . . . . . . . . . . . . . . . . . . .
TIBTECH innovations . . . . . . . . . . . . . . . . . . . . . . .
TNO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tokai Carbon Italia S.r.l. . . . . . . . . . . . . . . . . . . . . .
Total Glass Lubricants Europe GmbH . . . . . . . . . . . . . .
UAS Messtechnik GmbH . . . . . . . . . . . . . . . . . . . . .
Vesuvius France SA . . . . . . . . . . . . . . . . . . . . . . .
Vidromecanica . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viprotron GmbH . . . . . . . . . . . . . . . . . . . . . . . . . .
Vision Electric GmbH . . . . . . . . . . . . . . . . . . . . . . .
VMA Gesellschaft für visuelle Meßtechnik und Automatisierung mbH . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.228 W. Haldenwanger Technische Keramik GmbH & Co. KG . . .
1.229 WITT-GASETECHNIK GmbH & Co KG . . . . . . . . . . . . .
1.230 Zecchetti S.r.l. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.231 ZIPPE Industrieanlagen GmbH . . . . . . . . . . . . . . . . .
2 Fairground Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Hall Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1
Hall 09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2
Hall 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3
Hall 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4
Hall 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5
Hall 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6
Hall 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7
Hall 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8
Hall 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
© 2010 Messe Düsseldorf GmbH
462
463
471
472
475
476
480
482
484
487
488
490
491
494
495
498
499
503
506
510
513
514
516
517
519
523
530
532
532
534
536
538
540
548
552
556
8
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Exhibitors
glasstec.01.12.02
Cold end coating
glasstec.01.13.02
Transport and handling systems
glasstec.06
Contracting, consulting, engineering, services
glasstec.21.03
Special offers for architects
A & L Rondot S.A.S
Address
9, rue Jean-Elysée Dupuy
69410 Champagne au Mont d’Or
France
Phone
+33 4 72520860
Fax
+33 4 78474866
Product Details
glasstec.01.06.01
A & L Rondot S.A.S
Gob feeder
STAINLESS STEEL SCOOPS/TROUGHS
Internet address
www.groupe-rondot.com
RONDOT STAINLESS STEEL SCOOPS
E-Mail
sales@rondot-sa.com
Available in air-ride or water-cooled styles. Scoops require no coating or treatment, improves sliding effect and lasts much longer than conventional scoops.
Stand
Hall 13, D24 (Page 540)
SPECIALTY RONDOT STAINLESS STEEL TROUGHS
Air-cooled eliminates the need for coatings. Offers corrosion and oxidation resistance as well as long term life while being almost maintenance-free.
RONDOT CAST IRON TROUGHS
Product Overview
A & L Rondot S.A.S
High precision machined equipment, special dimensions for perfume and pharmaceutical containers.
glasstec.01.02.01
Refractory materials
glasstec.01.06.01
Gob feeder
glasstec.01.06.05
Shear blades
Available in air-ride or water-cooled styles. Scoops require no coating or treatment, improves sliding effect and lasts much longer than conventional scoops.
glasstec.01.06.12
Bottle and glass container machines
SPECIALTY RONDOT STAINLESS STEEL TROUGHS
glasstec.01.06.13
Moulds for glass production
Air-cooled eliminates the need for coatings. Offers corrosion and oxidation resistance as well as long term life while being almost maintenance-free.
glasstec.01.06.16
Spray Systems for gob forming
glasstec.01.12.01
Hot end coating
glasstec.01.06.12
Bottle and glass container machines
STAINLESS STEEL SCOOPS/TROUGHS
RONDOT STAINLESS STEEL SCOOPS
RONDOT CAST IRON TROUGHS
© 2010 Messe Düsseldorf GmbH
High precision machined equipment, special dimensions for perfume and pharmaceutical containers.
9
© 2010 Messe Düsseldorf GmbH
10
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.06.16
carbons, graphites and even other tapes. Less expensive and easier to work
with than the other tape products.
Spray Systems for gob forming
GRAPHOIDAL SHEAR SPRAY BARS
Provides maximum blade cooling and lubrication, while using the minimum amount
of emulsion. Available for all types of shear mechanisms and center distances.
GRAPHOIDAL SHEAR SPRAY SYSTEMS
Individual modules control emulsion ratios, bacteria, acidity, pressure and temperature. Eliminates oil waste and customizes shearing operation. Available for
both central and single shop systems. The systems offer reliability and consistency.
glasstec.01.12.02
Cold end coating
RONDOT LASER ADJUSTMENT SYSTEM
This equipment is fixed on the machine conveyor to detect and eject all down or
stuck containers before they go through the hot end hood.
Aachener Chemische Werke GmbH
Address
Adenauerstr. 20 - Europark C3
52146 Würselen
Germany
Phone
+49 2405 4497-0
Fax
+49 2405 4497-30
Internet address
www.acw-info.de
E-Mail
acw@chemetall.com
Stand
Hall 15, F48 (Page 552)
Cold End Equipment
GRAPHOIDAL COLD SPRAY EQUIPMENT
Twin axis spray bridge that monitors the lehr belt speed and also the distance
between the bottles, preventing the need for the operator to make adjustments
to the system either during a run or even on job changes. This type of fully automatic system control keeps the spray nozzle in the center of the row, ensuring
even and consistent coating application with the ability to position the tip of the
spray nozzle below the neck of the bottles ensuring no coating is applied to the
finish. The controller offers the operator the ability to customize the job set-up
and then store in job history.
GRAPHOIDAL COLD END DOSING
Can be combined with equipment mentioned above or purchased separately for
use with existing equipment and can operate on single or multiple lines. Provides precise ratio control for the coating emulsion strength, with fully automatic
adjustments to compensate for changes in water usage and, as the system injects the coating online, there is no mixture storage tank removing the bacterial
growth and build-up problems. The system also has an electronic back up pump
that activates automatically for trouble-free operation. The system displays digitally the flow rate from the nozzles, enabling the input of low and high flow alarms
that will instantly warn the operator if the spray nozzle is becoming blocked or if
there is a leak.
glasstec.01.13.02
Transport and handling systems
Product Overview
Aachener Chemische Werke GmbH
glasstec.01.02.03
Lubricators and coolants
glasstec.01.10.01
Optimization of glass cutting and glass production yield
glasstec.02.01.01.01
Cutting technology for float glass
glasstec.02.03.01.01
Grinding techniques for straight edges
Hot Glass Handling Equipment
ARMIL TAPE
For the customer who needs a softer more flexible ware handling material than
© 2010 Messe Düsseldorf GmbH
11
© 2010 Messe Düsseldorf GmbH
12
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.02.11.08.02
Chemical grinding and polishing materials
glasstec.02.11.08.03
Chemical coolants
glasstec.04.02
Cutting, grinding and drilling tools
Advantech S.p.A.
Product Details
glasstec.01.02.03
Aachener Chemische Werke GmbH
Lubricators and coolants
Address
Viale Tunisia, 43
20124 Milano
Italy
Phone
+39 02 63470611
Fax
+39 02 63470612
Internet address
www.advan-tech.net
E-Mail
info@advan-tech.net
Stand
Hall 13, B81 (Page 540)
ACECOOL – Kühlschmierstoffe
Kühlmittelkonzentrat
ACECOOL – Kühlschmierstoffe
Bei der Bearbeitung von Glas mit Diamantwerkzeugen reicht erfahrungsgemäß
Wasser oder ein Kühlmittel der Metallindustrie als Schleiflösung alleine nicht
aus, um den heutigen Produktivitäts- und Qualitätsanforderungen gerecht zu
werden.
Vollsynthetische Kühlschmierstoffe die heutzutage in der Glasbearbeitung eingesetzt werden erzielen folgende Vorteile:
Erhöhung der ProduktivitätBessere KantenqualitätHöhere Lebensdauer der DiamantwerkzeugeDer Energieverbrauch kann gesenkt werdenKorrosionsschutz
an den MaschinenSenkung der Instandhaltungskosten
Product Overview
Advantech S.p.A.
glasstec.01.08.01
Glass wool technology
glasstec.01.08.02
Rock wool technology
ACECUT 5250
glasstec.01.08.03
Textile glass fibre technology
ACECUT 5250 ist ein vollständig verdunstendes Schneidöl zum Zuschneiden
von Glas. Bevorzugte Anwendungsgebiete sind:
Product Details
Zuschnitt von beschichtetem GlasOn-line Zuschnitt von FloatglasZuschnitt von
SpiegelnZuschnitt von Verbundglas (Schneiden der Folie mit Messer)
glasstec.01.08.01
glasstec.01.10.01
Optimization of glass cutting and glass production yield
Des weiteren wird es auch zum allgemeinen Zuschnitt von Glas bis ca. 10 mm
verwendet.
Advantech S.p.A.
Glass wool technology
Glasswool
Advantech manufactures complete production lines and single machines and
equipment, using his own developed technology. Machines are based on revised off-center technology, and incorporate many developments and improvements.
• Product specifications
• Fiberizing
• Forming
© 2010 Messe Düsseldorf GmbH
13
© 2010 Messe Düsseldorf GmbH
14
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
• Curing
All machines can be supplied in standard dimensions, or specially build as per
customers‘ needs and specifications.
• Facing
• Cutting
• Packing
AEG Power Solutions GmbH
• Binder plants
• Water treatments
Address
Emil-Siepmann-Str. 32
59581 Warstein-Belecke
Germany
Advantech supplies complete new production lines and single machines for modernization of existing plants.
Phone
+49 2902 763216
All machines can be supplied in standard dimensions, or specially build as per
customers‘ needs and specifications.
Fax
+49 2902 7631201
glasstec.01.08.02
Internet address
www.aeg.com
• Emission treatments
• Control systems
Rock wool technology
Rockwoll
Advantech manufactures complete production lines and single machines and
equipment, using his own developed technology. Machines are based on revised fiberizing technology, and incorporate many developments and improvements.
• Product specifications
E-Mail
Stand
Hall 11, E40 (Page 536)
Product Overview
AEG Power Solutions GmbH
• Fiberizing
• Forming
• Curing
• Facing
• Cutting
glasstec.01.04.08
Electrically heated systems
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.02.07.01
Machines and equipment for the production of display
glass
glasstec.02.08.01
Complete plant for insulating glass production
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
• Packing
• Binder plants
• Water treatments
• Emission treatments
• Control systems
Advantech supplies complete new production lines and single machines for modernization of existing plants.
© 2010 Messe Düsseldorf GmbH
15
© 2010 Messe Düsseldorf GmbH
16
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.04.08
AEG Power Solutions GmbH
Electrically heated systems
Product Details
glasstec.01.02.02
AEROGAS GmbH
Industrial gases
Thyristor Power Controller - Thyro-Family
Krypton
Our Experience for your Quality - worldwide
Krypton ist farbloses und ungiftiges chemisch sehr träges Edelgas. Krypton
wird bei Isoliergläsern anstelle von Argon im Scheibenzwischenraum eingesetzt,
weil es ein schlechter Wärmeleiter ist. In der Technik wird es überwiegend zum
Füllen von Glühlampen, Halogenlampen, Niederdruck-Quecksilberdampflampen
und Fotoblitzbirnen genutzt.
Industrial heating with Power Controller of the AEG Thyro-Family stands for quality, reliability, reproducibility, accuracy and comminication capability as essential
features of the future orientated Thyro-Family.
AEROGAS GmbH
AGC Ceramics Co., Ltd.
Address
Reichspräsidentenstr. 21-25
45470 Mülheim a.d. Ruhr
Germany
Phone
+49 208 997739
Fax
+49 208 997741
Internet address
www.aerogas.de
E-Mail
info@aerogas.de
Stand
Hall 13, A33 (Page 540)
Product Overview
Industrial gases
glasstec.02.11.04
Sealants
Mita NN Building Floor 6, 4-1-23,
108-0014 Tokyo
Japan
Phone
+81 3 5442-9180
Fax
+81 3 5442-9192
Internet address
E-Mail
Stand
AEROGAS GmbH
glasstec.01.02.02
Address
Hall 13, A94 (Page 540)
Product Overview
glasstec.01.02.01
AGC Ceramics Co., Ltd.
Refractory materials
Product Details
glasstec.02.11.08.01
Chemical drying equipment
glasstec.01.02.01
AGC Ceramics Co., Ltd.
Refractory materials
Bonded Refactories
Asahi Glass Ceramics Co. Ltd. produces a variety of bonded refractories including basic burned/unburned bricks, High-alumina burned/unburned bricks, fire-
© 2010 Messe Düsseldorf GmbH
17
© 2010 Messe Düsseldorf GmbH
18
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
clay burned/unburned bricks, graphite containing burned/unburned bricks and
special bricks for steel refining and glass melting furnaces. We produce a variety of mortar according to the bricks used.
AGK Hochleistungswerkstoffe GmbH
Address
Fallgatter 8
44369 Dortmund
Germany
Applications for glass melting furnace Magnesia bricks PB-98G, PB-98S, G-MG95, UB-M Magnesia-zircon bricks MZ-HG, MZ-SG Magnesia-spinel bricks PSBA3
Phone
+49 231 936964-0
Applications for cement kilns Chrome-free bricks BNC-55, BNC-44 Magnesiaspinel bricks PSB-A10, HAS-50
Fax
+49 231 936964-50
Applications for nonferrous metal melting furnaces Magnesia-chromea bricks
NSX-750, CKL-750, MAC-BDS-70, MAC-BD-70
Internet address
www.agk.eu
High-alumina bricks High-alumina bricks consist mainly of an electro-fused material of corundum or corundum-mullite.
E-Mail
info@agk.eu
Applications for glass melting furnace High-alumina bricks CWK-3, CWR-6
Stand
Hall 13, F07 (Page 540)
Basic bricks There are three types of basic bricks: those mainly of spinel, highly
pure magnesia clinker, and dolomite.
Applications for cement kilns High-alumina bricks CWK-36
Bonded Refactories
Product Overview
Asahi Glass Ceramics Co. Ltd. produces a variety of bonded refractories including basic burned/unburned bricks, High-alumina burned/unburned bricks, fireclay burned/unburned bricks, graphite containing burned/unburned bricks and
special bricks for steel refining and glass melting furnaces. We produce a variety of mortar according to the bricks used.
AGK Hochleistungswerkstoffe GmbH
glasstec.01.02.01
Refractory materials
glasstec.01.09.01
Transport systems
Basic bricks There are three types of basic bricks: those mainly of spinel, highly
pure magnesia clinker, and dolomite.
glasstec.01.09.02
Stacker systems
Applications for glass melting furnace Magnesia bricks PB-98G, PB-98S, G-MG95, UB-M Magnesia-zircon bricks MZ-HG, MZ-SG Magnesia-spinel bricks PSBA3
glasstec.02.11.02
Replacement and spare parts
glasstec.02.11.03
Insulating C203materials
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
High-alumina bricks High-alumina bricks consist mainly of an electro-fused material of corundum or corundum-mullite.
glasstec.03.06.02
Braided wire hoses and straps made of fibreglass
Applications for glass melting furnace High-alumina bricks CWK-3, CWR-6
glasstec.04.04
Replacement part, wearing parts
Applications for cement kilns Chrome-free bricks BNC-55, BNC-44 Magnesiaspinel bricks PSB-A10, HAS-50
Applications for nonferrous metal melting furnaces Magnesia-chromea bricks
NSX-750, CKL-750, MAC-BDS-70, MAC-BD-70
Applications for cement kilns High-alumina bricks CWK-36
© 2010 Messe Düsseldorf GmbH
19
© 2010 Messe Düsseldorf GmbH
20
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.02.01
AGK Hochleistungswerkstoffe GmbH
GleitTherm®
GleitTherm® bieten wir sowohl für den Heißglaskontakt
an, als auch als Einschiebedreiecke für den Kühlofen.
Refractory materials
K-Therm®
K-Therm®
K-Therm® Werkstoffe Typ AS, AS M und CS
Asbestfreie Isolierstoffe mit hoher Festigkeit, bis
1500°C, auf Basis Faserzement, Glimmer, Kalziumsilikat, Keramik z.B. K-Therm® AS 500, AS 700, AS 710;
K-Therm® AS 710, AS 600M, AS 800M, K-Therm® CS
950, CS 1000, CS 1100, CS 1150, CS 1500.
Air Products
Address
Hüttenstr. 50
45527 Hattingen
Germany
GleitTherm® - Gleitschiene
Phone
+49 2324 689-0
Überall wo unter hohen Temperaturen transportiert und
gefördert werden muss, kommen Gleitschienen und
Kettengleitschienen aus GleitTherm® zum Einsatz
Fax
+49 2324 689-100
Internet address
www.airproducts.de/glas
GleitTherm® - Gleitschiene
E-Mail
bulkinfo@airproducts.com
Überall wo unter hohen Temperaturen transportiert und
gefördert werden muss, kommen Gleitschienen und
Kettengleitschienen aus GleitTherm® zum Einsatz
Stand
Hall 13, A85 (Page 540)
glasstec.01.09.01
Transport systems
Product Overview
glasstec.01.09.02
Stacker systems
GleitTherm®
GleitTherm® bieten wir sowohl für den Heißglaskontakt
an, als auch als Einschiebedreiecke für den Kühlofen.
© 2010 Messe Düsseldorf GmbH
21
Air Products
glasstec.01.02.02
Industrial gases
glasstec.01.04.05
Gas equipment and supply systems
glasstec.01.04.09.02
Combustion technology for oxygen heating systems
glasstec.05.01.02.02
Measurement, control and inspection of gas
compounds
© 2010 Messe Düsseldorf GmbH
22
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.02.02
Air Products
Industrial gases
Was immer Sie brauchen, ob Gasversorgung, Verbrennungssysteme, technische Unterstützung, Sicherheitsschulungen oder Beratung, Air Products hat die
Mitarbeiter, Produkte und Dienstleistungen, die Ihnen helfen Ihre Prozesse zur
Glaserzeugung zu optimieren.
Gase
Air Products stellt eine große Bandbreite an Gasen
für die moderne Glasindustrie her. Innovative Anwendungen dieser Gase werden eingesetzt, um Effizienz, Qualität, Sicherheit und die allgemeine Wirtschaftlichkeit
der Arbeitsverfahren zu verbessern.
Air Products bietet eine umfassende Palette von Produkten und Dienstleistungen für Kunden aus allen Industriezweigen. In welcher Branche Sie auch tätig
sind - wir erfüllen Ihre Anforderungen.
Wir verfügen weltweit über Systeme, mit deren Hilfe Sauerstoff an unsere Kunden in der Glasindustrie geliefert wird. Dazu verwenden wir Pipelines, cryogene Luftzerlegung, Vakuumdruckwechsel-Adsorption und Flüssiglieferung. Air
Products stimmt mit dem Kunden die Verfahrensanforderungen, den Einsatz
der Gasprodukte, die Vor-Ort-Bedingungen für die Gasanwendungen und die
Energiekosten ab, um so eine passende Lösung zu entwickeln.
Zu den in der Glasindustrie eingesetzten Gasen gehören Sauerstoff, Stickstoff,
Argon, Helium und Wasserstoff.
Glas
Im wettbewerbsorientierten Umfeld von heute sollte Ihr
Glasofen mit der besten Technologie ausgerüstet sein.
Hierzu brauchen Sie einen erfahrenen Lieferanten, der für einen sicheren und
effektiven Einsatz dieser Technologie sorgt. Air Products liefert seit mehr als 20
Jahren innovative Lösungen für seine Kunden in der Glasindustrie.
Air Products verfügt über die Technologie und die fachliche Kompetenz, die
Glashersteller zur Verbesserung ihrer Schmelzprozesse benötigen. Der Cleanfire®Brenner mit einer strahlungsintensiven, impulsarmen Flamme setzt mit weltweit
mehr als 1000 installierten Brennern Maßstäbe in der Glasindustrie. Kunden auf
der ganzen Welt verlassen sich auf Air Products und verwenden unsere Technologie in mehr als 150 Öfen mit einer Glasproduktion von über 7000 Tonnen
pro Tag.
Air Products ist im Bereich der Oxyboost-Anwendungen an Float-Glaswannen
unangefochten der führende Anbieter und liefert über 80 % aller Installationen
weltweit.Die beiden weltweit einzigen Floatglasöfen, die zu 100 % mit Oxyfuel betrieben werden, sind mit Cleanfire® HR-Brennern von Air Products ausgerüstet. Unser Cleanfire®-HR-Brenner hat beim direkten Vergleich mit anderen Flachflammenbrennern mehrfach als Test-Sieger abgeschnitten und erbringt zusätzlich bis zu 10 % höhere Brennstoffeinsparungen. In Verbindung mit
unseren optimierten Anlagen zur Vor-Ort-Sauerstofferzeugung kann ein System
© 2010 Messe Düsseldorf GmbH
von Air Products im Vergleich zur Befeuerung mit Luft bei einem großen Glasschmelzofen bis zu 4 Millionen US-Dollar pro Jahr an Betriebskosten einsparen.
23
Übersicht Argon
Argon ist ein einatomiges Gas und bildet mit 0,9 % einen Bestandteil der Luft.
Argon ist farb-, geruch- und geschmacklos, nicht brennbar sowie ungiftig und
wird technisch mithilfe der Luftzerlegung gewonnen.
Air Products liefert Argon für eine Vielzahl von Industrien und Anwendungen.
Sein Einsatz reicht von Anwendungen in der Metallverarbeitung bis hin zur Herstellung von Leuchtmitteln.
Wir stellen Ihnen Argon in jeder Form kostengünstig zur Verfügung. Wir liefern
Argon gasförmig und flüssig und in der Reinheit, die Sie für Ihre Anwendung
benötigen. Von der Einzelgasflasche bis zur Tankwagenlieferung haben wir alles
im Programm und bieten die für Ihre Anforderungen entsprechende Lösung.
Erfahren Sie unter Equipment & Lieferformen mehr über unser Angebot.
Air Products genießt einen hervorragenden internationalen Ruf in Sicherheitsfragen und ist bereits mit zahlreichen Preisen ausgezeichnet worden. Mit Service Plus geben wir unser Know-how direkt an Sie weiter. Möchten Sie Näheres
über unsere Schulungen und Dienstleistungen erfahren? Dann klicken Sie einfach auf die Schaltfläche Sicherheit.
glasstec.01.04.05
Gas equipment and supply systems
Electronics Equipment Solutions (EES) Gas and Chemical Deliv
The Air Products Electronic Equipment Solutions (EES) business unit is backed
by more than 60 years of experience in the safe and reliable delivery of gases
and chemicals to the semiconductor, TFT-LCD and photovoltaics industries. Our
GASGUARD® and ChemGuard® Delivery Systems are the industry benchmark
for cost-effective fabwide gas and chemical supply. Our cost-competitive solutions will help your process run more efficiently and effectively.
Our EES Comprehensive Product Offering includes:
ChemGuard Chemical Delivery Systems GASGUARD Gas Delivery Systems gas cabinets and gas panels GASGUARD Bulk Specialty Gas Systems (BSGS)
© 2010 Messe Düsseldorf GmbH
24
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
– High-Flow System and Very High Flow System GASGUARD Distribution Systems - Valve Manifold Boxes (VMB) and Distribution Valve Box (DVB) GASGUARD Direct Blender (onsite dynamic gas blender) VaporGuard® Temperature Control Systems QMAC® Quality Monitoring and Control Anaytical Systems Remote command and monitoring life-safety systems available Multiple
controller platform options Contract manufacturing Service offerings – Turnkey
solutions, project & construction management, startup-commissioning
glasstec.01.04.09.02
Combustion technology for oxygen heating systems
Air Products
Air Products was established in 1940 in Detroit, Michigan, on the strength of a simple but then revolutionary
idea: the “on-site” concept of producing and selling industrial gases, primarily oxygen. At the time, most oxygen was sold as a highly compressed gas product in
cylinders that weighed five times more than the gas itself. Air Products proposed building oxygen gas generating facilities adjacent to large-volume users, thereby
reducing distribution costs. The concept of piping the gas directly from the generator to the point of use proved sound and technically solvable. Air Products
Today · 18,900 employees around the world · Operations in more than 40 countries · Fiscal 2009 revenues of $8.3 billion · Ranked 248th in sales among Fortune magazine’s May 2009 list of the 500 largest U.S. corporations Serving a
Diversity of Markets Merchant Gases Through our Merchant Gases business,
we supply oxygen, nitrogen, argon, helium and hydrogen as well as certain medical and specialty gases to a wide variety of industrial and medical customers.
We deliver most gases via bulk supply, by tanker or tube trailer, in liquid or
gaseous form. For customers requiring small volumes, we supply product in
cylinders and dewars, or “packaged gases.” We also produce gases for some
customers via small cryogenic or noncryogenic on-site generators through sale
of gas contracts and some sale of equipment.
PRISM Oxygen VSA Generators
Providing state-of-the art oxygen production technology, Air Products’ PRISM
Oxygen Vacuum Swing Adsorption (VSA) generators are a flexible and highly
reliable oxygen supply source with low capital and operating costs. Utilizing proprietary technology and an easy-to-install modular design, the PRISM Oxygen
VSA generators are ideal for lower purity, on-site oxygen gas applications where
they are an economical alternative to cryogenically produced or truck-delivered
liquid oxygen.
© 2010 Messe Düsseldorf GmbH
25
ALBAT+WIRSAM Software AG
Address
Konrad-Adenauer-Str. 15
35440 Linden
Germany
Phone
+49 6403 9700
Fax
+49 6403 64390
Internet address
www.a-w.de
E-Mail
aw.germany@glaston.net
Stand
Hall 14, B40 (Page 548)
Company News
08/17/2010
ALBAT+WIRSAM Software AG
Minimum waste within an optimum production
sequence:
DynOpt Software from ALBAT+WIRSAM Optimizes
Continuous-Flow Production
Fully-automatically, in any desired sequence, A+W’s
DynOpt achieves highest material yield in the modern
production environment. Steering state-of-the-art sorting and dynamic buffer systems like HEGLA SortJet
and BYSTRONIC first’sort, DynOpt’s flexible configuration can be implemented according to the requirements of any production operation, as a fully-automated, closed-circuit system on-line, or in combination
with an intermediate buffer. Simple in concept, revolutionary in results: DynOpt
reduces raw material input across the board, even eliminating residue plates
completely with the most frequent glass types. Labor, too, is reduced to a minimum: only one operator is needed to oversee and support an entire optimization
scheme. Within this constant stream of glass, the just-in-time handling of breakage and the integration of rush jobs are significantly improved. ALBAT+WIRSAM
has finally tamed the high-waste factor in just-in-time production, and as a bonus,
eased the accompanying job organization pressures which plague every modern glass facility today.
© 2010 Messe Düsseldorf GmbH
26
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
you at the Glaston stand in hall 14, stand 14/B40
Photo below: A DynOpt/SortJet ensemble as seen from the break-out table:
right, the DynOpt instruction monitor; left, the swivel conveyor; far left, the dynamic buffer; front left, a sheet being up-righted at the positioning guide
software@glaston.net www.a-w.de www.glaston.net
08/17/2010
08/17/2010
ALBAT+WIRSAM: Automation in the Glass Industry
The speed at which glass processing machinery replaces manual processes by automatic ones, is truly
breathtaking.
The useful these individual functions are: They are not
enough to achieve the full saving poten¬tial. To use the
new possibilities to the best effect, the entire process
chain has to be adjusted to produce a constant flow of
material, permitting quick reactions in case of emergency.
ALBAT+WIRSAM links the individual technologies in one interactive network.
The elements in the cutting area for instance exchange information real-time
with the components of the IG line. The material flow is adjusted real-time. This
helps to achieve the original, actual aim of automa¬tion: A constant stream of
glass. Even for medium-sized companies, ALBAT+WIRSAM and their machinery partners achieve the feat to run IG productions with just 3-4 persons per
shift – including float and laminated glass cutting. All machinery required for
producing triple IG like sheet turning devices, are of course integrated in the
networked control of the production environment. The staff of these companies do not carry sheets or stacks of papers – they control and monitor the production. ALBAT+WIRSAM realises similar automation processes in the field of
toughened glass, laminated glass, and processing.
With this state-of-the-art production software, ALBAT+WIRSAM links the machinery of all the leading manufacturers. With ALBAT+WIRSAM as their partner,
customers just choose the tech¬nologies best suited to him – we will take care
of the networking!
ERP and order entry: Ready for new market requirements
ALFAK is a proven ERP system which has been improved and adapted all the
time to our cus¬tomer’s needs. Its current version can handle triple IG – even
multiple IG – the structure, layers etc. of which can of course be displayed. By
popular request, the input of laminated glass has been improved: As for IG input,
the structure is visualised by pictograms; changes of the product structure like
the addition, removal, or amendment of glass or film layers are easily made in
the bill of material; the same applies to the prices of the individual elements.
These are just a few of our highlights 2010 – we should be pleased to welcome
© 2010 Messe Düsseldorf GmbH
27
Five Questions Glass Processors should ask BEFORE
investing in Integrated Software Technology
Manufacturers are always looking for ways to improve
efficiency & profits. Increased competition in the marketplace causes added stress amongst top managers
to increase revenues in the most organized, cost effective way. How are top flat glass, window and door companies managing to increase production and overcome
costly production deficits in their operations? They are
turning towards new technology and investing in Integrated ERP /PPS Software
Solutions and creating one central platform to control, organize, and maintain all
aspects of their production flow from start to finish. Selecting the right software
company for such a project is critical. It all boils down to doing your homework/research. First you must identify needs and the unique challenges your
company faces. Then you need to evaluate the software solutions on the market
specifically for Glass Processing and Window +Door Manufacturing. Whichever
company you select, they will become a life-long partner working directly with
your business, assisting in automating your production processes; positioning
your organization for future growth. The last thing you want is to spend thousands on a software system, only to find out later on that it does not meet your
expectations or the comprehensive needs of your business. We encourage you
to ask these 5 important questions when considering a software proposal: 1.
Is the software you’re evaluating a truly Integrated ERP /PPS Solution? This is
the #1 question you should ask before investing time with a software company.
Why? Because there are only a handful of companies on the market specialized
in software solutions exclusively for Glass, Window + Door Manufacturing. You
want a system that has your industry know-how behind it and is adaptable to the
growing need of the industry.
Why is this important? You want to invest in a system that is flexible and can integrate with any other systems you are operating, avoiding having to reconfigure
or spend hours on expensive staff training. The new system should be able to tie
into any current system, support one-time entry of data (at order entry) for all subsequent applications, and circulate it continuously throughout all cells. Departments should be able to access information electronically at anytime, eliminating
paper trails. Finally, you want the certainty of working on a single, Microsoft SQL
based platform. 2. Who are the software developers? How financially sound is
the company, and will they be around to take care of things if they go wrong?
© 2010 Messe Düsseldorf GmbH
28
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
You’re about to make a major investment in a complete ERP solution to maintain your company’s flow of information and streamline your entire production
operations. Shouldn’t you know the company’s history and be sure they have a
sound knowledge of your industry? Ask about their track record, case studies
and testimonials from satisfied clients. Schedule a live demonstration onsite. 3.
What kind of technical support is offered? All software companies should have
a highly qualified technical team to support clients through every step of the implementation process, and assist afterwards when needed. Technicians who
know the software and communicate well with your team can quickly resolve
problems and make sure all systems are properly functioning. 4. How long will
the implementation process take? A successful ERP Solution installation is not
completed in a matter of days. Be cautious if a company promises to do so! To
implement a truly Integrated ERP system, it will take a few months at minimum,
depending on the unique challenges you’re facing. 5. How much does it cost?
This question is very important when you’re looking at a budget and ROI. Ask it!
It’s important that the vendor has a clear picture of your goals, needs and current
operations. This will assist him in providing you with an accurate cost/ROI assessment. The more detailed the offer, the better you’ll know that the software
will fulfill your expectations. Beware of a vendor who offers you a system based
solely on price, and not on the tasks the system is expected to do to secure your
company’s future growth:
Choosing the right software system is like buying a car. Any one will get you
from point A to point B. But, if you do a little homework in preparation, the system you ultimately choose will be reliable, save you money and grow with your
enterprise. Everyone in the Glass Processing industry faces similar challenges.
Do these still apply to you? A. Inefficient “paperwork” data flow B. High error
rate at order entry and from dealers C. High waste, scrap and inventory costs
D. Hit a plateau with new customers and dealer s E. A combination of any of the
above If any of these problems are typical of your organization, you may want
to consider evaluating some Integrated ERP and PPS Software vendors on the
market, and develop a strategic plan for overcoming them. Many vendors offer
free workshops and live demonstrations, so you can see their software capabilities first hand. Whether you’re looking to upgrade your current software system
or introduce your company to its first Integrated Software Solution, you are now
5 steps closer to streamlining your production processes and operation!
Link to our websites: /www.a-w.de www.glaston.net
08/18/2010
High Tech Lego on the Magical Board: Composing and
Visualising Production Environments Within Seconds
No scrawled sketches on paper for visualising production environments, vari-
© 2010 Messe Düsseldorf GmbH
29
ants, and networked solutions: On the Glaston stand, ALBAT+WIRSAM is going
to present a virtual construction kit con-taining modules such as machinery, elements, and IT tools for composing, rearranging, and re-inventing the desired
solutions. With just a couple of movements and the right instinct we will ‚build’
a model of your production line, a layout for a production hall, or a complete
project to work on together: moving elements, adding a transport belt, a label
printer, a rotating device. Of course you can try it out yourself because it is not
only useful but also a lot of fun – after a short training session you will feel just
like Harry Potter. We are not going to tell you how exactly this works because it
shall be a surprise after all. Just this: Visualisation has the size of a slide show,
with high resolution, and true to scale. You want to bring your own Lego bricks?
No problem. Just bring your technical drawings in JPEG or PDF format – we
will adjust the scale and integrate your material. We shall be pleased to discuss
the scenarios created as well as their possible realisation in a follow-up meeting
at your premises. Be prepared for a completely new planning and visualisation
experience – on the Glaston / AL-BAT+WIRSAM stand in hall 14, stand B 40.
www.a-w.de www.glaston.net software@a-w.de
08/17/2010
In record time: Production control with ALCIM at
SEMCOGLAS Glastechnik Nordhorn
In record time: Production control with ALCIM at SEMCOGLAS Glastechnik Nordhorn May 2009: In Nordhorn, Semcoglas Glastechnik are producing toughened and laminated glass of the utmost production
depth. The new, ultra modern processing machinery
is meant for the produc¬tion of safety glass units of up
to 2,80 x 6 metres in size. Optimum quality combined with highest de¬livery
capacity – the machinery is meant for the job, the staff is highly qualified. Still,
the processes of this sophisticated production have to be controlled with utmost
precision to ensure that the production machinery work in tune, down times are
avoided, and all processes of this multi-step production are perfectly synchronised. Branch manager Stefan Herrmann says: „The workers are not supposed
to run all over the place looking for information but shall be able to get the information they need for the present step right at their workplace.“ In the spring of
2009 it became clear that the software Semcoglas were using at that time could
not cope with these requirements. The Semcoglas management team decided
to make a radical cut: Semcoglas Glastechnik will introduce a software system
for production planning and control that permits to establish a slim yet quick information network. In the fully networked environment, not only the production
machinery shall be controlled online: According to the information philosophy
defined by Stefan Herrmann, all necessary product and processing information
© 2010 Messe Düsseldorf GmbH
30
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
shall be available online, displayed on monitors at all pre-processing machines,
silk screening and coating lines, toughening furnaces, and laminated glass production.
After a thorough check of all available options, the decision was made for ALBAT + WIRSAM’s pro-duction planning and control system ALCIM. Parallel with
the production software, the ERP system ALFAK shall be implemented for administration and order processing, thus ensuring a smooth and reliable flow of
information between administration and the shop floor.
processes are actually being implemented and realised.“
Photo below: With just a few exceptions, this is the only production paper at
Semcoglas Glastechnik: the label. It contains all information for identifying the
sheet and track its way on the shop floor.
Product Overview
ALBAT+WIRSAM Software AG
Time is running out because the high-tech production shall run as soon as possible at full throttle. Together with the A+W partners, Semcoglas decided to embark on a demanding ‚lightning project‘: Within just three months, the complete
ALCIM system including the information system ToolTV on all terminals and an
overall capture of production data shall be implemented. In October, Semcoglas
Glastechnik shall be working with only one type of production papers, with just
a few exceptions: the label. Based on barcode registration, the sheet shape,
layers, necessary processing steps – simply all necessary information will be
clearly displayed at the terminal monitors.
glasstec.01.10.01
Optimization of glass cutting and glass production yield
glasstec.02.13.02
Software
glasstec.05.02.02
CNC control for handling machines
glasstec.05.03.01
MRP/CAD/CIM systems
Overall barcoding: This means also that by means of barcode-based sheet
tracking, a sheet’s proc-essing state and whereabouts will be known at all times.
The flow of goods and material is highly complex: It may take two to fifteen
days (in extreme cases) for a sheet to pass all processing steps at Semcoglas
Glastechnik. Customers asking ‚Where is my sheet?‘ have to get precise answers, every time they ask – customers can expect this service. Since Semcoglas Glastechnik registers every single proc¬essing step, this information is
available all the time, even to the order entry staff.
glasstec.05.03.03
Optimization systems for cutting and yield
glasstec.05.03.04
Process control systems
glasstec.05.03.05
Other control systems
October 2009: With a joint effort, Semcoglas and ALBAT+WIRSAM have made
a precision landing. „On 1 October“, Stefan Herrmann states, „ the system went
online, and we have cut the first sheets with the help of the new software. It
has been hard work up to that point, but from day one on we have been able to
work. We have been able to cut glass and control all machines so that we could
go on supplying our customers with sheets. In the months after that, we have
fine-tuned the system and trained the users.“
Today, more than half a year into live operation, the branch manager of SEMCO
Glastechnik reca-pitulates: „Except for minor details, 95% of the t project have
been implemented. The interaction and the ambitious implementation have paid
off, and was even quite enjoyable.“
IT manager Stefan Bruns, close to the action at all times and in constant dialogue
with software part¬ner A+W: „We are close to the optimum! The cooperation is
excellent. We have had no trouble at all. The communication is perfect. We are
intensive and constant contact with Albat+Wirsam to make sure that the defined
© 2010 Messe Düsseldorf GmbH
31
Product Details
glasstec.01.10.01
ALBAT+WIRSAM Software AG
Optimization of glass cutting and glass production yield
DynOpt
is a sequence-creating, dynamic optimisation and cutting control system for cutting, breakout, and sorting,
with the option of additional despatch control via RackOpt (transport rack optimisation).
DynOpt controls automatic sorting systems like HEGLA’s
SortJet or BYSTRONIC’s first’sort. As an ALCIM module, DynOpt creates everydesired production sequence with top yield, thanks to the restriction-free cutting
followed by dynamic sorting.
© 2010 Messe Düsseldorf GmbH
32
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
XOPT
Product Overview
Software for Cutting Optimization
glasstec.01.02.01
Refractory materials
glasstec.06
Contracting, consulting, engineering, services
XOPT is an intuitively operable, practice-oriented instrument to optimise your cutting process. Also, it is
the most modern and economic way of profiting from
ALBAT+WIRSAM’s cutting algorithms, leading on the
world market. Maximum yield, fully graphic WINDOWS
surface, intuitive operation - XOPT is the perfect solution for you. And - above
all - you can afford it!
Alfaref GmbH
Product Details
glasstec.01.02.01
Alfaref GmbH
Refractory materials
Sekundärrohstoffe in verschiedenen Körnungsgrößen
XOPT-ON Dynamic
is a real-time cutting control system for creating highly
flexible optimisation jobs while keeping residue plates to
a minimum. Due to the constant use of residue plates and
the possibilityto cut stockplates of different glass types
alternately, the overallyield may be improved by several
percent. Ideal for the real-timeaddition of remakes and
rush orders.
All Glass S.r.l.
Address
Via Cesare Sarti, 20
43029 Traversetolo / PR
Italy
Phone
+39 0521 340810
Fax
+39 0521 340805
Internet address
www.allglass.it
E-Mail
info@allglass.it
Stand
Hall 13, F79 (Page 540)
Alfaref GmbH
Address
Fritz-Thiedemann-Ring 20
25746 Heide
Germany
Phone
+49 481 78760830
Fax
+49 481 78760839
Internet address
www.alfaref.de
E-Mail
regina.ebberg@alfaref.de
Stand
Hall 13, E31 (Page 540)
© 2010 Messe Düsseldorf GmbH
33
© 2010 Messe Düsseldorf GmbH
34
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
ACCESSORIES
Product Overview
All Glass S.r.l.
glasstec.01.06.13
Moulds for glass production
glasstec.01.10.06
Stacking machines
Vibrating platesCold treatment hoodsBottles accumuation tablesOmega systems
for operator’s passageBottle elevators and loweratorsBottle over-turning and
blowing systemsBottle orientersBottles flow dividers
glasstec.01.13.02
Transport and handling systems
Chain Conveyor
glasstec.01.12.01
Hot end coating
glasstec.01.12.02
Cold end coating
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.03
Conveying, sorting and storage facilities
glasstec.01.13.04
Packing lines - boxes, shrinking, hoop-casing
machinery
Product Details
glasstec.01.12.02
Chain Conveyor
full Pallets Labeller
All Glass S.r.l.
Cold end coating
Glass bottles cold-end lines
TECHNICAL DESCRIPTION AND MAIN FEATURES
Modular structure complete of rectilinear sections, bends, side transfers, alignersQuick adjustment lateral guideAutomation for conveying line’s control
full Pallets Labeller
INNOVATIVE ELEMENTS
Modular high technology to satisfy every specific requirementEasy integration
and retrofit into existing conveying linesMaximum lay-out flexibilityLong-term reliable performances by using hard-wearing materialsPossibility of installation of
every kind of commercial chain or belt
OPTIONS
Stainless steel or aluminium frameChain sliding tracks in polished steel, hardwearing plastic material or phenolic resin soaked wood (lignostone)Ejecting devices for broken or laid down bottlesCullet bulk conveyors for rejected bottlesSupervision system for the automatic control og the whole conveying system
© 2010 Messe Düsseldorf GmbH
35
© 2010 Messe Düsseldorf GmbH
36
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
palletizzer for cases packs
tray/hood Former
palletizzer for cases packs
tray/hood Former
pallettizing robot
AMBEG Dr. J. Dichter GmbH
pallettizing robot
Roller conveyor
Address
Tempelhofer Weg 65-68
10829 Berlin
Germany
Phone
+49 30 7800950
Fax
+49 30 7881214
Internet address
www.ambeg.de
E-Mail
info@ambeg.de
Stand
Hall 14, B22 (Page 548)
Roller conveyor
© 2010 Messe Düsseldorf GmbH
37
© 2010 Messe Düsseldorf GmbH
38
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Overview
AMBEG Dr. J. Dichter GmbH
glasstec.01.06.11
Ampoule and laboratory glass machines
glasstec.01.06.12
Bottle and glass container machines
glasstec.01.09.01
Antonini S.r.l.
Address
Via Medaglie d´Oro della Resistenza, 2
50053 Empoli / Florence
Italy
Transport systems
Phone
+39 0571 93221
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
Fax
+39 0571 931828
glasstec.01.13.02
Transport and handling systems
Internet address
www.antoninisrl.com
glasstec.02.05.01
Laser-isolating technology
E-Mail
antoninisrl@leonet.it
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
Stand
Hall 13, D20 (Page 540)
Product Details
AMBEG Dr. J. Dichter GmbH
Product Overview
Antonini S.r.l.
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
Syringe forming machine FS 16
glasstec.01.09.04
Decorating lehrs
Vertical 16/12-heads indexing motion machine for the production of syringe barrels from glass tube
glasstec.01.09.05
Pre-heating furnaces
glasstec.01.12.02
Cold end coating
glasstec.02.11.01
Tools
glasstec.01.06.11
glasstec.01.06.12
Ampoule and laboratory glass machines
Bottle and glass container machines
Vial forming machine RP 16
Vertical 16/8-heads indexing motion machine for the production of tubular glass vials
© 2010 Messe Düsseldorf GmbH
39
© 2010 Messe Düsseldorf GmbH
40
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.09.03
Antonini S.r.l.
Annealing lehrs, continuous/intermittent operation
Annealing lehrs
Input sectionThis section is created according to the
loading system: by hand or automatic.For the manual
system we install insulating doors lifted pneumatically
or electrically; these doors guarantee low-room temperatures for people working around this area. For the automatic loading system we install an insulating covering complete with door containing the input-roller, the transfer plates, the crossconveyor and the shovel of the pusher. Generally this covering is fitted to the
dimensions and the kind of the pusher.Temperature controlled section This section is divided into areas where the air temperature is controlled through special
systems. In each area there is a special air-recycling loop maintained by one or
more stainless steel turbines. By this process you obtain: stability of the temperature guaranteed by the forced-air circulation, uniformity of the temperature
guaranteed by an efficient air distribution, maximum performance of the thermal
exchange “air-object”, maximum use of the energy produced by the heatingsystems. The elements into which this section is divided are completely independent both for the air-circulation and fir the heating and cooling systems. The
elements that make up this section are equipped either with heating systems, or
with heating and cooling systems or with cooling systems only. Each element is
made up of three parts: internal walls are in stainless steel or carbonioium steel,
between the internal walls and the external ones an insulation is created by rock
wool packed at a density of about 120 kg/m3; the external frame is in steel and
heating and cooling are located in the various areas according to the system and
the kind of lehr you need to arrange. Harvesting table Uncovered section and
Belt-traction-groupWe would like to highlight the simplicity of the arrangement
and the easy accessibility to the installed devices. The structure is prepared according to the needs of the customer and to the kind of the unloading (by hand
or automatically), the presence of cold-treatments (either from above or from
underneath), the presence of belt-cleaning-systems and the kind of room where
the gathering is carried out.Heating systems:Direct heating-system Section of
lehr with direct-heating system with gas-fed Antonini-built burners. This system
is used in almost all the annealing and decorating lehrs because we obtain the
best ratio ”performance/consumption”.Depending on the gas pressure available
in the plant, you can use burners for low pressure, the classic type (with fan)
or burners for medium pressure, extremely simplebecause of the absence of
the fan.Indirect heating-system The heating means, radiant-tubes, placed into
the zones of the lehr are employed as thermal-exchangers. They are made by
© 2010 Messe Düsseldorf GmbH
41
a U-shaped tube of refractory steel and have the burner at one end, to feed
them, and the chimneys for the exhausting of the combustion-smokes at the
other. For this type of heating we can use any kind of gas and diesel oil.Electric
heating-system The picture shows an electric triphase resistance-panel at high
efficiency and a section of the lehr where these panels are installed.The resistive heating elements are with an exposed winding hare-thread for optimal
maximum thermal exchange.Mixed heating-systemThe picture shows a mixed
heating system. The section on the right can operate ina combined environment of gas-electricityCooling meansThe cooling, in the controlled temperature
area, is created by valves with electric control and with hot-air extractors. In the
uncovered part fan groups with variable or fixed speed have been used.
Tempering lehrs
Tempering lehrs
glasstec.01.09.04
Decorating lehrs
Annealing lehrs
Input section
This section is created according to the loading system:
by hand or automatic.
For the manual system we install insulating doors lifted
pneumatically or electrically; these doors guarantee
low-room temperatures for people working around this area. For the automatic
loading system we install an insulating covering complete with door containing
the input-roller, the transfer plates, the cross-conveyor and the shovel of the
pusher. Generally this covering is fitted to the dimensions and the kind of the
pusher.
Temperature controlled section
© 2010 Messe Düsseldorf GmbH
42
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
This section is divided into areas where the air temperature is controlled through
special systems. In each area there is a special air-recycling loop maintained
by one or more stainless steel turbines. By this process you obtain: stability of
the temperature guaranteed by the forced-air circulation, uniformity of the temperature guaranteed by an efficient air distribution, maximum performance of
the thermal exchange “air-object”, maximum use of the energy produced by the
heating-systems. The elements into which this section is divided are completely
independent both for the air-circulation and fir the heating and cooling systems.
The elements that make up this section are equipped either with heating systems, or with heating and cooling systems or with cooling systems only. Each
element is made up of three parts: internal walls are in stainless steel or carbonioium steel, between the internal walls and the external ones an insulation is
created by rock wool packed at a density of about 120 kg/m3; the external frame
is in steel and heating and cooling are located in the various areas according to
the system and the kind of lehr you need to arrange.
exhausting of the combustion-smokes at the other. For this type of heating we
can use any kind of gas and diesel oil.
Electric heating-system
The picture shows an electric triphase resistance-panel at high efficiency and a
section of the lehr where these panels are installed.
The resistive heating elements are with an exposed winding hare-thread for optimal maximum thermal exchange.
Mixed heating-system
The picture shows a mixed heating system. The section on the right can operate
ina combined environment of gas-electricity
Cooling means
The cooling, in the controlled temperature area, is created by valves with electric
control and with hot-air extractors. In the uncovered part fan groups with variable
or fixed speed have been used.
Harvesting table
Uncovered section and Belt-traction-group
We would like to highlight the simplicity of the arrangement and the easy accessibility to the installed devices. The structure is prepared according to the
needs of the customer and to the kind of the unloading (by hand or automatically), the presence of cold-treatments (either from above or from underneath),
the presence of belt-cleaning-systems and the kind of room where the gathering
is carried out.
Heating systems: Direct heating-system
Decorating lehrs
Decorating lehrs
Section of lehr with direct-heating system with gas-fed Antonini-built burners.
This system is used in almost all the annealing and decorating lehrs because
we obtain the best ratio ”performance/consumption”.
Depending on the gas pressure available in the plant, you can use burners for
low pressure, the classic type (with fan) or burners for medium pressure, extremely simple
because of the absence of the fan.
glasstec.01.09.05
Pre-heating furnaces
Mould-preheating oven
Indirect heating-system
The heating means, radiant-tubes, placed into the zones of the lehr are employed as thermal-exchangers. They are made by a U-shaped tube of refractory
steel and have the burner at one end, to feed them, and the chimneys for the
© 2010 Messe Düsseldorf GmbH
43
© 2010 Messe Düsseldorf GmbH
44
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Mould-preheating oven
Product Overview
glasstec.01.13.02
apb antonio piazza brevetti s.r.l.
Transport and handling systems
Product Details
glasstec.01.12.02
Cold end coating
glasstec.01.13.02
Cold processes
apb antonio piazza brevetti s.r.l.
Transport and handling systems
MTO
Storage unit with orthogonal traversing, available in various versions and storage
capacities between 1.000 and 35.000 Kg. for half and large sheets.
This range includes the following models:MTOH,MTOC ed MTO MAP:
MTOH
MTOH 2000, 2000 Kg.,with manual and semi automatic traversing for half sheets;
Cold processes
MTOH 3000, portata 3000 Kg.,with manual and semi automatic traversing for
half sheets;
MTOH 4000, portata 4000 Kg.,with manual and semi automatic traversing for
half sheets;
MTOH 6000, 6000 kg. with manual and semi automatic traversing for half sheets;
MTOH 6606, 6000 Kg., capacity, for large sheets, manual, semi automatic and
automatic traversing;
apb antonio piazza brevetti s.r.l.
MTOH 9000, 9000 Kg., semiautomatic and automatic traversing
Address
Via Liguria, 19
36015 Schio / VI
Italy
MTOH 12000, 12000 Kg., semiautomatic and automatic traversing
MTOH 15000, 15000 Kg., semiautomatic and automatic traversing
MTOH 20000, 20000 Kg., semiautomatic and automatic traversing
Phone
+39 0445 576397
Fax
+39 0445 579336
Internet address
www.apbsrl.it
-MTOC
E-Mail
business@apbsrl.it
MTOC : Storage uni with orthogonal traversing, available in various versions and
storage capacities for half sheets
Stand
Hall 16, A57 (Page 556)
MTOH 25000, 25000 Kg., semiautomatic and automatic traversing
MTOH 30000, 30000 Kg., semiautomatic and automatic traversing
MTOH 35000, 35000 Kg., semiautomatic and automatic traversing
MTOC 1000, 1000 Kg., manual and semiautomatic traversing for half sheets;
MTOC 2000, 2000 Kg., manual and semiautomatic traversing for half sheets;
MTOC 3000, 3000 Kg., manual and semiautomatic traversing for half sheets;
© 2010 Messe Düsseldorf GmbH
45
© 2010 Messe Düsseldorf GmbH
46
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
MTOC 4000, 4000 Kg., manual and semiautomatic traversing for half sheets;
-MTO MAP
MTO MAP: storage unit with orthogonal traversing, automatic traversing, only,
PLC controlled, for large sheets, 10.000 to 50.000 Kg. capacity.
MTO MAP: storage unit with orthogonal traversing, automatic traversing, only,
PLC controlled, for large sheets, 10.000 to 50.000 Kg. capacity.
ORTAN 240/220
MTO
Ortan 240 was designed, projected and realised in order to stock in it both sheet
product and packed and/or loose products.
Storage unit with orthogonal traversing, available in various versions and storage
capacities between 1.000 and 35.000 Kg. for half and large sheets.
Ortan 240 is a patented machine.
This range includes the following models:MTOH,MTOC ed MTO MAP:
Sheet products can be stocked in it are the following: sheets of glass, aluminium,
copper, special alloies, plexiglass, polycarbonate, PTFE and so on.
MTOH
Packed and/or loose products can be stocked by ORTAN 240 , model MEC.
MTOH 2000, 2000 Kg.,with manual and semi automatic traversing for half sheets;
The main model, ORTAN 240, for the sheet product has the frame-structure suitable to contain some product with the following dimensions: lenght mm. 3.600 –
height mm. 2.400 – thickness 150-190-220-270 mm, with a capacity until 2.000
Kg.
MTOH 3000, portata 3000 Kg.,with manual and semi automatic traversing for
half sheets;
MTOH 4000, portata 4000 Kg.,with manual and semi automatic traversing for
half sheets;
The overall lenght of the main model is mm. 4.000.
ORTAN 240, can be supplied, on request, with particular dimensions.
MTOH 6000, 6000 kg. with manual and semi automatic traversing for half sheets;
MTOH 6606, 6000 Kg., capacity, for large sheets, manual, semi automatic and
automatic traversing;
ARC Glass Melting Solutions
MTOH 9000, 9000 Kg., semiautomatic and automatic traversing
MTOH 12000, 12000 Kg., semiautomatic and automatic traversing
Address
Rue du Petit Houck
59173 Blaringhem
France
Phone
+33 (0) 3 21954641
MTOH 15000, 15000 Kg., semiautomatic and automatic traversing
MTOH 20000, 20000 Kg., semiautomatic and automatic traversing
MTOH 25000, 25000 Kg., semiautomatic and automatic traversing
MTOH 30000, 30000 Kg., semiautomatic and automatic traversing
Fax
MTOH 35000, 35000 Kg., semiautomatic and automatic traversing
-MTOC
Internet address
www.agms-intl.com
MTOC : Storage uni with orthogonal traversing, available in various versions and
storage capacities for half sheets
E-Mail
contact@agms-intl.com
Stand
Hall 13, D81 (Page 540)
MTOC 1000, 1000 Kg., manual and semiautomatic traversing for half sheets;
MTOC 2000, 2000 Kg., manual and semiautomatic traversing for half sheets;
MTOC 3000, 3000 Kg., manual and semiautomatic traversing for half sheets;
MTOC 4000, 4000 Kg., manual and semiautomatic traversing for half sheets;
-MTO MAP
© 2010 Messe Düsseldorf GmbH
47
© 2010 Messe Düsseldorf GmbH
48
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.04.02
Product Overview
ARC Glass Melting Solutions
Forehearth technology
AGMS
glasstec.01.04.01
Batch charging technology
glasstec.01.04.02
Forehearth technology
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.05
Gas equipment and supply systems
Melting Specialists
glasstec.01.04.06
Regenerative systems
The expertise of the world leader in tableware is the best possible guarantee
for the solutions AGMS will provide. We use the glass melting solutions that we
offer so they have been tried and tested.
glasstec.01.04.07
Recuperative systems
We have also the means of experimenting new R&D opportunities.
glasstec.01.04.08
Electrically heated systems
The quality of our glass, visible through the glassware of Arc International’s
brands is the best proof of our skills.
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
The expertise of the world leader in tableware is the best possible guarantee for
the solutions AGMS will provide. We use the glass melting solutions that we offer
so they have been tried and tested. We have also the means of experimenting
new R&D opportunities. The quality of our glass, visible through the glassware
of Arc International’s brands is the best proof of our skills
glasstec.01.04.03
glasstec.01.04.09.02
Combustion technology for oxygen heating systems
glasstec.01.04.10
NOx control technology
glasstec.01.04.11
Filter technologies (smoke and electrostatic)
glasstec.01.04.13
Feeder colouring
Product Details
glasstec.01.04.01
glasstec.01.04.05
Smelting technology for tank furnaces
Gas equipment and supply systems
AGMS
The expertise of the world leader in tableware is the best possible guarantee for
the solutions AGMS will provide. We use the glass melting solutions that we offer
so they have been tried and tested. We have also the means of experimenting
new R&D opportunities. The quality of our glass, visible through the glassware
of Arc International’s brands is the best proof of our skills
glasstec.01.04.06
Regenerative systems
AGMS
ARC Glass Melting Solutions
Batch charging technology
The expertise of the world leader in tableware is the best possible guarantee for
the solutions AGMS will provide. We use the glass melting solutions that we offer
so they have been tried and tested. We have also the means of experimenting
new R&D opportunities. The quality of our glass, visible through the glassware
of Arc International’s brands is the best proof of our skills
batch plant integration
The expertise of the world leader in tableware is the best possible guarantee for
the solutions AGMS will provide. We use the glass melting solutions that we offer
so they have been tried and tested. We have also the means of experimenting
new R&D opportunities. The quality of our glass, visible through the glassware
of Arc International’s brands is the best proof of our skills
© 2010 Messe Düsseldorf GmbH
49
glasstec.01.04.07
Recuperative systems
AGMS
The expertise of the world leader in tableware is the best possible guarantee for
the solutions AGMS will provide. We use the glass melting solutions that we offer
so they have been tried and tested. We have also the means of experimenting
© 2010 Messe Düsseldorf GmbH
50
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
new R&D opportunities. The quality of our glass, visible through the glassware
of Arc International’s brands is the best proof of our skills
glasstec.01.04.08
so they have been tried and tested. We have also the means of experimenting
new R&D opportunities. The quality of our glass, visible through the glassware
of Arc International’s brands is the best proof of our skills
Electrically heated systems
AGMS
glasstec.01.04.13
The expertise of the world leader in tableware is the best possible guarantee for
the solutions AGMS will provide. We use the glass melting solutions that we offer
so they have been tried and tested. We have also the means of experimenting
new R&D opportunities. The quality of our glass, visible through the glassware
of Arc International’s brands is the best proof of our skills
AGMS
glasstec.01.04.09.01
Feeder colouring
The expertise of the world leader in tableware is the best possible guarantee for
the solutions AGMS will provide. We use the glass melting solutions that we offer
so they have been tried and tested. We have also the means of experimenting
new R&D opportunities. The quality of our glass, visible through the glassware
of Arc International’s brands is the best proof of our skills
Combustion technology for oil and gas fired smelting
furnaces
AGMS
The expertise of the world leader in tableware is the best possible guarantee for
the solutions AGMS will provide. We use the glass melting solutions that we offer
so they have been tried and tested. We have also the means of experimenting
new R&D opportunities. The quality of our glass, visible through the glassware
of Arc International’s brands is the best proof of our skills
glasstec.01.04.09.02
Combustion technology for oxygen heating systems
Area Impianti S.p.A.
Address
Via Leonino da Zara, 3/A
35020 Albignasego / PD
Italy
Phone
+39 049 8626426
Fax
+39 049 8626422
Internet address
www.areaimpianti.it
E-Mail
commerciale@areaimpianti.it
Stand
Hall 13, A87 (Page 540)
AGMS
The expertise of the world leader in tableware is the best possible guarantee for
the solutions AGMS will provide. We use the glass melting solutions that we offer
so they have been tried and tested. We have also the means of experimenting
new R&D opportunities. The quality of our glass, visible through the glassware
of Arc International’s brands is the best proof of our skills
glasstec.01.04.10
NOx control technology
AGMS
The expertise of the world leader in tableware is the best possible guarantee for
the solutions AGMS will provide. We use the glass melting solutions that we offer
so they have been tried and tested. We have also the means of experimenting
new R&D opportunities. The quality of our glass, visible through the glassware
of Arc International’s brands is the best proof of our skills
glasstec.01.04.11
Filter technologies (smoke and electrostatic)
Product Overview
Area Impianti S.p.A.
glasstec.01.04.10
NOx control technology
glasstec.01.04.11
Filter technologies (smoke and electrostatic)
glasstec.02.12.04
Purification of exhaust gases
AGMS
The expertise of the world leader in tableware is the best possible guarantee for
the solutions AGMS will provide. We use the glass melting solutions that we offer
© 2010 Messe Düsseldorf GmbH
51
© 2010 Messe Düsseldorf GmbH
52
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Area Impianti S.p.A.
ASCO Numatics GmbH
Address
Otto-Hahn-Str. 5
75248 Ölbronn-Dürrn
Germany
De-NOX SNCR treatment of nitrogen oxides obtained through
the reaction with ammonia, activated by high emperature
(850-1050°C). Generally, these temperatures are reached
immediately downstream of an incineration or calcination furnace. Ammonia can be injected in water solution (about
25%) or through decomposition of a diluted urea solution.
The use of urea generally involves less safety limits during
transport and storage.
Phone
+49 7237 996-0
Fax
+49 7237 996-1
Internet address
www.asconumatics.de
E-Mail
asconumatics-de@emerson.com
In the SCR systems (Selective Catalytic Reduction), special catalyzers allow
the reaction of nitrogen oxides reduction at lower temperatures compared to
SNCR systems. The reducing agent typically used is ammonia in water solution
(<25%). The catalyzers normally are subdivided in modules and the systems
are projected in order to work even with small dust quantities and starting from
165°C. This is possible thanks to some patents of Area Impianti
Stand
Hall 13, B19B (Page 540)
glasstec.01.04.11
Proportionalregler optimieren den Einsatz von Druckluft in der Glasindustrie
glasstec.01.04.10
NOx control technology
De-NOX SNCR and SCR
Filter technologies (smoke and electrostatic)
Electrofilters
Company News
23.09.2010
ASCO Numatics GmbH
Neuer Servotronic Digital-Druckregler für die
Hohlglasherstellung
Ölbronn-Dürrn, den 14. September 2010 - Die Anforderungen an Pneumatikventile in der Hohlglasherstellung sind enorm. Speziell für Proportionalventile mit integrierter Elektronik stellen die hohen Umgebungstemperaturen und die Verschmutzung große Herausforderungen dar. Hinzu kommen die präzisen Drücke, mit denen z.B. Glasflaschen geblasen werden müssen.
The electrostatic precipitator is projected for the removal, within the required limits, of the dusts carried
from the gases originated by melting or combustion processes. It consists of collecting plates and emitting
electrodes. Area Impianti developed its own know-how
for this technology in a optimized way for the different
specific applications
Das neue Proportionalventil SERVOTRONIC Digital von ASCO Numatics erfüllt
diese extremen Anforderungen in allen Belangen. Im Ventil findet die patentierte Stahlschieber-Gleitmantel-Technologie Verwendung, die mit 1 μm Toleranz eingepasst ist. Diese Technologie kommt ohne bewegliche Dichtelemente
aus und ist deshalb gerade für den hohen Temperaturbereich prädestiniert und
auf eine hohe Lebensdauer ausgelegt.
Die im Ventil integrierte digitale Regelelektronik bietet weitere Vorteile. Sie regelt
zum einen sehr präzise den per Sollwert vorgegebenen Ausgangsdruck inner-
© 2010 Messe Düsseldorf GmbH
53
© 2010 Messe Düsseldorf GmbH
54
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
halb geringster Toleranzen über einen geschlossenen Regelkreis. D.h. dass
auch der Drucksensor, der den Istwert erfasst, im Ventil integriert ist. Zum
anderen lassen sich über eine PC-Schnittstelle die verschiedenen Parameter
wie Druckverlauf und Reglerverlauf visualisieren. Es können damit auch Drucksprünge, Rampenverläufe und Einschwingverhalten simuliert, beobachtet und
aufgezeichnet werden. Die Funktion ist ähnlich einem Oszilloskop. Alle Parameter lassen sich einfach über einen Mausklick ändern.
Das Proportionalventil SERVOTRONIC Digital ist somit ein idealer Baustein u.a.
für die Hohlglasherstellung und ergänzt die umfangreiche Palette der Regelventile von ASCO Numatics um ein weiteres Highlight.
ASCO NUMATICS liefert eine Produktpalette von mehr als 60.000 Artikeln aus
dem Bereich ”Fluidtechnik”. Philosophie des Unternehmens ist, optimale Lösungen für den jeweiligen Kunden und Einsatzzweck zu schaffen. ASCO NUMATICS ist Mitglied der international tätigen Emerson-Gruppe. Weitere Informationen unter www.asconumatics.de
Die Emerson-Gruppe mit Zentrale in St. Louis, Missouri (USA), ist ein weltweit
führendes Unternehmen bei der Zusammenführung von ”Technologie” und ”Engineering” mit dem Ziel, innovative Lösungen für Kunden in Industrie und Handel sowie für Endverbraucher zu schaffen. Dabei stützt sich Emerson auf einen
Verbund leistungsfähiger Unternehmen, die in den Bereichen Prozessmanagement, Industrielle Automation, Klimatechnologie und Entwicklung von Geschäftsanwendungen tätig sind. Im Geschäftsjahr 2009 betrug der Umsatz 20,9 Mrd.
US-Dollar. Weitere Informationen unter www.emerson.com
Mehr Informationen zum Produkt unter www.asconumatics.de/wbs/w3b.exe/_de/411/3544/3565
Product Overview
glasstec.01.06.17
ASCO Numatics GmbH
Aids for the forming of hollow glass
Athena Engineering & Construction
Address
41, avenue du Général de Gaulle
62510 Arques
France
Phone
+33 321 954647
Fax
+33 127471
Internet address
www.athena-intl.com
E-Mail
contact@athena-intl.com
Stand
Hall 13, D81 (Page 540)
Company News
06/30/2010
Athena Engineering & Construction
Large gift ware items for European market
Athena Engineering & Construction (a division of ARC International) is selected
to build a press-blow machine for large items. This machine ST 6 produces up to
11 pieces per minute with max. 260 mm diameter and max. 300 mm net height.
Complete control about the process and all involved mould elements including
the automatic control of the parison elongation are the guarantee for the good
and constant quality of the manufactured articles. This machine will be supplied
in September.
The revised model is able to realize articles of up to 300 mm diameter and 500
mm height.
For questions or more information, please contact the agent for the glass industry, Mr. Klaus Pöting (poeting@poeting.de) or see www.athena-intl.com.
© 2010 Messe Düsseldorf GmbH
55
© 2010 Messe Düsseldorf GmbH
56
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.06.07
Product Overview
Athena Engineering & Construction
Press machines
Press machines
glasstec.01.06.01
Gob feeder
rotary type presses
glasstec.01.06.07
Press machines
- hydraulic pressing - electric pressing - direct table drive
(torque motor)
glasstec.01.06.08
Press-blow-machines
single gob operation double gob machines tandem
lines
glasstec.01.06.13
Moulds for glass production
glasstec.01.06.08
Press-blow-machines
Press machines
glasstec.01.06.14
Flash welding and fire polishing machines
4 different types
glasstec.02.03.02.01
Decorative grinding technology for hollow glass
from 5 - 110 articles / minute from 40 - 300 mm diameter
from 50 - 500 mm height
glasstec.02.03.05
Polishing technology
rotating blowing fix blowing fix blowing in block moulds
glasstec.01.06.13
glasstec.02.03.08.01.01Screen printing techniques
Moulds for glass production
moulds with mathematic modeling
glasstec.02.09.01.01
Furnaces for thermal pre-tempering of glass
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
Product Details
glasstec.01.06.01
Athena Engineering & Construction
Gob feeder
mathematic modeling
glasstec.01.06.14
Flash welding and fire polishing machines
burn off and fire polishing
Feeder
adapted to the related press- blow machine, from 40
- 300 mm glassdiameter to more than 110 articles /
minute
mechanic gob feeder electronic gob feeder
angular shears parallel shears servo driven shears
© 2010 Messe Düsseldorf GmbH
press moulds blank mould and plungers for press-blowmachines blowmoulds for rotating blowing blowmoulds
for fix blowing blowmoulds made of graphite
firepolisher adapted to the related line, tracking burner
system
57
© 2010 Messe Düsseldorf GmbH
58
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.04.10
Adhesive technology
glasstec.06
Contracting, consulting, engineering, services
Avaluxe International GmbH
Address
Phone
Waldstromer Str. 59
90453 Nürnberg
Germany
Product Details
glasstec.01.09.01
+49 911 641551-100
Avaluxe International GmbH
Transport systems
Advanced Ceramic Rolls
Fax
+49 911 641551-199
Internet address
www.avaluxe.com
E-Mail
service@avaluxe.com
Stand
Hall 12, D31 (Page 538)
Product Overview
Characteristics:
* High chemical Purity * Smooth Surface * Excellent dimensional tolerances *
High electrical insulation * Low thermal conductivity * Low thermal expansion
coefficient * Good high temperature shock resistance * High rigidity to melting
point * High mechanical strength * High precision manufacturing * Big dimensional products are available * Taylor made Solutions * Rapid Services * Very
competitive Prices * Excellent Quality – external implemented Quality Inspection
Avaluxe International GmbH
glasstec.01.09.01
Transport systems
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
glasstec.02.06.08
Sputtering targets for glass coatings
glasstec.02.09.02.01
Laminated glass technology with foil for architectural
glass
glasstec.02.09.02.02
Laminated glass technology with foil for automotive
glass
glasstec.02.09.02.03
Laminated glass technology with adhesives, casting
resin and laminate
© 2010 Messe Düsseldorf GmbH
59
AYROX SCRL
Address
Av. de Fré 98 bte 7
1180 Brussels
Belgium
Phone
+32 2 3756198
Fax
+32 2 3720351
Internet address
www.ayrox.com
E-Mail
deals@ayrox.com
Stand
Hall 12, C65 (Page 538)
© 2010 Messe Düsseldorf GmbH
60
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Overview
glasstec.01.02.04
AYROX SCRL
Solar
Laboratory equipment
As there are no European norms governing solar panels, many manufacturers
have their internal norms to follow. This is also true for other special application
glazing. We can provide the necessary quality control solutions for production
control of these applications.
glasstec.02.03.08.01.01Screen printing techniques
glasstec.02.05.02
Laser-marking technology
glasstec.02.09.01.01
Furnaces for thermal pre-tempering of glass
glasstec.02.09.02.02
Laminated glass technology with foil for automotive
glass
glasstec.03.03
Automotive glass
glasstec.05.01.01.04
glasstec.05.01.01.07
glasstec.05.01.02.02
Barbaric GmbH
Address
Pummererstr. 12
4020 Linz
Austria
Phone
+43 732 779800
Fax
+43 732 77980010
Internet address
www.barbaric.at
E-Mail
sales@barbaric.at
Stand
Hall 12, A48 (Page 538)
Measurement and control of glass thickness
Measurement and control of glass tension
Measurement, control and inspection of gas
compounds
Product Details
glasstec.01.02.04
For the specific properties, where a notified body is necessary, we can provide
equipment for the factory production control to maintain quality level required.
AYROX SCRL
Laboratory equipment
Quality control devices
Product Overview
Automotive
glasstec.01.13.02
Transport and handling systems
glasstec.21.02
Special offers for glass trade / crafts
When aiming for a certification, weather it is international or a product specific requirement requested by the customer, we have the solution. We have
equipement for obligatory daily testing, as well as for testing according to standards of automotive industry.
Barbaric GmbH
Architectural
The CE mark being mandatory in all glasses fixed on to a building, it is necessary to make sure everything is in order to avoid problems. With the correct
equipment most of the testing can be done in house.
© 2010 Messe Düsseldorf GmbH
61
© 2010 Messe Düsseldorf GmbH
62
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.13.02
Barbaric GmbH
BDF INDUSTRIES S.p.A.
Transport and handling systems
Address
Via dell’Industria, 40
36100 Vicenza
Italy
Phone
+39 0444 286100
Fax
+39 0444 286299
SSY
LIGHT CRANE SYSTEM SUITABLE FOR OUR LIFTERS
C-profile made of steel, zinc coated. Crane is equipped with rolls and lateral
guide rolls. The rolls are equipped with ball bearings.
Internet address
Movement across and along manually by pull and push at the load.
E-Mail
Installation at the ceiling or gantry supports.
Stand
Hall 13, D15 (Page 540)
Design made of aluminium is possible.
Product Overview
If required crane bridge and crane trolly electrically.
BDF INDUSTRIES S.p.A.
glasstec.01.06.01
Gob feeder
glasstec.01.06.12
Bottle and glass container machines
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.01.09.02
Stacker systems
glasstec.02.11.02
Replacement and spare parts
glasstec.06
Contracting, consulting, engineering, services
Product Details
glasstec.01.06.12
BDF INDUSTRIES S.p.A.
Bottle and glass container machines
BDF Feeder
© 2010 Messe Düsseldorf GmbH
63
© 2010 Messe Düsseldorf GmbH
64
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
1. Mechanisms designed for speed up to 170 cuts/min. 2.
Possible applications from 0° to 30° RH and 0° to 90° LH.
3. 360° differential gear on the plunger cam. 4. Shears
mechanism with air-spring to improve the cutting motion
at high speed. 5. Shears arm in lightweight aluminium
alloy against corrosion. 6. Shears cooling spray system
from bottom or from top. 7. Plunger assist with air-spring
to improve plunger up and down motion at high speed. 8.
Roller linear guide on the shears linkage for a better motion control at high speed. 9. Lincoln lubrication on all guide and control systems.
10. Lubrication in oil for the shears mechanism and plunger cam differential. 11.
Shears cams with reduced stroke for high cutting speed. 12. Bevel gear pair
type revolving tube mechanism for a better control of tube revolving speed. 13.
Fan air cooling in the revolving tube ball bearing. 14. Manual or motor-driven
revolving tube height adjustment system ( 130 mm ). 15. Revolving tube speed
adjustment with brushless motor controlled by the machine computer.
BDF Feeder
1. Mechanisms designed for speed up to 170 cuts/min. 2.
Possible applications from 0° to 30° RH and 0° to 90° LH.
3. 360° differential gear on the plunger cam. 4. Shears
mechanism with air-spring to improve the cutting motion
at high speed. 5. Shears arm in lightweight aluminium
alloy against corrosion. 6. Shears cooling spray system
from bottom or from top. 7. Plunger assist with air-spring
to improve plunger up and down motion at high speed. 8.
Roller linear guide on the shears linkage for a better motion control at high speed. 9. Lincoln lubrication on all guide and control systems.
10. Lubrication in oil for the shears mechanism and plunger cam differential. 11.
Shears cams with reduced stroke for high cutting speed. 12. Bevel gear pair
type revolving tube mechanism for a better control of tube revolving speed. 13.
Fan air cooling in the revolving tube ball bearing. 14. Manual or motor-driven
revolving tube height adjustment system ( 130 mm ). 15. Revolving tube speed
adjustment with brushless motor controlled by the machine computer.
High Tech 2000 I.S. Maschine BDF - D.G. 6 1/4”
BDF, a leading company in the glass industry, now
presents its latest I.S. machine model D.G. 6 1/4” to
open new prospects in the production of hollow glass.
Innovation, technology, and versatility make this machine the ideal solution for high productivity, improved
© 2010 Messe Düsseldorf GmbH
65
work surroundings, and considerable energy savings.
The long experience acquired in the design and construction of I.S. machines
permits BDF to create the D.G. 6 1/4” in different section number: versions with
6, 8, 10, and 12 sections and 6+6, 8+8 sections (tandem). Blow moulds of a
maximum 6 5/8” diameter can be mounted on the I.S. D.G. 6 1/4” machine.
The machine can also be converted into a triple gob model 4 1/4”.
High Tech 2000 I.S. Maschine BDF - D.G. 6 1/4”
BDF, a leading company in the glass industry, now
presents its latest I.S. machine model D.G. 6 1/4” to
open new prospects in the production of hollow glass.
Innovation, technology, and versatility make this machine the ideal solution for high productivity, improved
work surroundings, and considerable energy savings.
The long experience acquired in the design and construction of I.S. machines
permits BDF to create the D.G. 6 1/4” in different section number: versions with
6, 8, 10, and 12 sections and 6+6, 8+8 sections (tandem). Blow moulds of a
maximum 6 5/8” diameter can be mounted on the I.S. D.G. 6 1/4” machine.
The machine can also be converted into a triple gob model 4 1/4”.
Becker Lehr Loader GmbH
Address
Lutherstr. 11
32049 Herford
Germany
Phone
Fax
+49 522 182-313
Internet address
www.beckerlehrloader.com
E-Mail
mail@beckerlehrloader.com
Stand
Hall 14, E01 (Page 548)
© 2010 Messe Düsseldorf GmbH
66
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Overview
glasstec.01.09.02
Becker Lehr Loader GmbH
Stacker systems
Product Details
glasstec.01.09.02
Becker Lehr Loader GmbH
Stacker systems
4-Gelenk-Einschieber
Mit der patentierten Neukonstruktion des 4-GelenkEinschiebers Becker.two4three dokumentiert sich eine
jahrzehntelange Erfahrung in der industriellen Hohlglasproduktion. Die robuste und unkomplizierte Maschine überzeugt durch eine auffallend ausgeglichene Dynamik im Betrieb.
Der 4-Gelenk-Einschieber ist einfach zu bedienen und arbeitet konstruktionsbedingt äußerst wartungsarm und wirtschaftlich.
Product Overview
Bekintex N.V.
glasstec.01.02.01
Refractory materials
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.02.04
Forming and bending technology
glasstec.02.11.02
Replacement and spare parts
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
glasstec.03.03
Automotive glass
glasstec.04.01.01
Mechanical tools
glasstec.04.04
Replacement part, wearing parts
Product Details
Bekintex N.V.
Address
glasstec.01.06.17
Bekintex N.V.
Aids for the forming of hollow glass
Heat-resistant separation material
Neerhonderd 16, IP Kwatrecht
9230 Wetteren
Belgium
BEKITHERM ® knitted, woven, braided and needle-punched products are used
in various applications :
glass bending covering material for glass handling tools as replacement for asbestos and man-made mineral fibres roller coverings for the glass and aluminium
industry high-temperature seals
Phone
+32 9 3657111
Fax
+32 9 3657117
BEKITHERM ® products are used in production processes where resistance to
both high temperatures and mechanical loads is required.
Internet address
www.bekaert.com/bekintex
E-Mail
bekintexinfo@bekaert.com
In the production of complex glass forms and stainless steel cooking pans, BEKITHERM
® fabrics are used as separation cloth between the glass or metal and the mould.
It provides a cushion and prevents optic defects.
Stand
Hall 12, B29 (Page 538)
Advantages : it is a combination of :
© 2010 Messe Düsseldorf GmbH
heat-resistance (700 °C and more) softness flexibility durability environmental
friendlyness easy to affix (can be welded, sewed,...) easy to shape
67
© 2010 Messe Düsseldorf GmbH
68
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Heat-resistant separation material
BEKITHERM ® knitted, woven, braided and needle-punched products are used
in various applications :
glass bending covering material for glass handling tools as replacement for asbestos and man-made mineral fibres roller coverings for the glass and aluminium
industry high-temperature seals
BEKITHERM ® products are used in production processes where resistance to
both high temperatures and mechanical loads is required.
In the production of complex glass forms and stainless steel cooking pans, BEKITHERM
® fabrics are used as separation cloth between the glass or metal and the mould.
It provides a cushion and prevents optic defects.
Advantages : it is a combination of :
heat-resistance (700 °C and more) softness flexibility durability environmental
friendlyness easy to affix (can be welded, sewed,...) easy to shape
Benteler Maschinenbau GmbH
Address
Frachtstr. 10-16
33602 Bielefeld
Germany
Product Overview
Benteler Maschinenbau GmbH
glasstec.01.10.04
Paper applying machines
glasstec.01.10.06
Stacking machines
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.02.01.01.03
Cutting technology for technical glass
glasstec.02.01.03
Devices for coating removal
glasstec.02.02
Drilling technology
glasstec.02.03.01.01
Grinding techniques for straight edges
glasstec.02.03.01.02
Grinding techniques for patterned glass
glasstec.02.03.01.03
Grinding techniques for formed glass
glasstec.02.09.02.01
Laminated glass technology with foil for architectural
glass
glasstec.02.09.02.02
Laminated glass technology with foil for automotive
glass
Phone
+49 521 542-0
Fax
+49 521 542-229
Internet address
www.benteler-glass.com
E-Mail
glass-processing@benteler.com
glasstec.02.10.01
Washing machines and equipment
Stand
Hall 15, G14 (Page 552)
glasstec.02.10.02
Brushing, high-pressure and ultrasonic systems
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
© 2010 Messe Düsseldorf GmbH
69
© 2010 Messe Düsseldorf GmbH
70
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.10.04
Benteler Maschinenbau GmbH
Paper applying machines
Secondary equipment - 2 connection boxes network and neutral - box of auxiliary
connection - 6 temperature sensors - Air cooling natural or 4 fans or 2 hydro - 1
speed sensor
Maschinenbaustahlrohre
Version - Horizontal or vertical - Kaplan, Francis, Pelton
AD x ID 32 x 25-250 x 150 mm
Varivolt
On load stepless variable voltage transformer.
Technical performances:
BERNARD & BONNEFOND
Address
7, allée Mathieu Murgue
42100 Saint Etienne
France
Phone
+33 4 77953000
Fax
+33 4 77957806
LV or HV primary voltage. Galvanic insulation between primary and secondary
windings. Linear, on load voltage variation. No DC component. Friendly simplified interface with supervisory systems. 100 % custom made equipment.
Bock Energietechnik
Address
Gösen 15
92685 Floß
Germany
Phone
+49 9603 1295
Fax
+49 9603 2995
Internet address
www.bock-energietec.de
Internet address
E-Mail
Stand
Hall 13, B86 (Page 540)
Product Overview
BERNARD & BONNEFOND
glasstec.01.04.03
Smelting technology for tank furnaces
E-Mail
info@bock-energietec.de
glasstec.01.04.08
Electrically heated systems
Stand
Hall 13, E85 (Page 540)
glasstec.06
Contracting, consulting, engineering, services
Product Details
glasstec.01.04.08
BERNARD & BONNEFOND
Electrically heated systems
SYNCHRONOUS GENERATOR
Equipment generator - Frame, housing, bearings, - excitation brushless or static
/AVR, - coupling flange, shaft.
© 2010 Messe Düsseldorf GmbH
71
© 2010 Messe Düsseldorf GmbH
72
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Product Overview
Bock Energietechnik
Bock Energietechnik
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.02
Forehearth technology
glasstec.01.04.03
Smelting technology for tank furnaces
Leistungsbereich 30 – 300 kg pro Tag
glasstec.01.04.08
Electrically heated systems
Erfahrung und Technologie aus den Großanlagenbereich, übersetzt auf kleinere
Anlagen, ist das Konzept für eine Vielzahl von elektrischen Glasschmelzöfen.
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.01.09.04
Decorating lehrs
glasstec.01.09.05
Pre-heating furnaces
glasstec.02.09.01.01
Furnaces for thermal pre-tempering of glass
glasstec.05.01.01.01
Measurement and control of glass position detection
Glasschmelzöfen für spezielle Glasherstellung
Diese Öfen zeichnen sich aus durch:
Gute Glasqualität
Flexible Produktionsmöglichkeiten
Geringer Energieverbrauch
Hohe Betriebssicherheit
Angenehme Arbeitsbedingungen (keine Lärmbelästigung)
Einfache Bedienung
Umweltfreundliche Betriebsweise (kein Kamin)
glasstec.01.04.08
Electrically heated systems
glasstec.05.01.01.03
Measurement and control of radiation in the melt
glasstec.05.01.01.05
Measurement and control of glass temperature
We design the forehearth boosting system specific for
the application.
glasstec.05.01.05
Control and automation technology
In the past years, we habe installed systems that have
successfully met all the required demands.
glasstec.05.02.01
MRP machine and transport adjustment
glasstec.05.03.01
MRP/CAD/CIM systems
A variety of electrode arrangements have been installed
such as bottom and side electrodes and air- or watercooled electrodes. Likewise, the electrical switching of the electrodes is designed for a particular application.
glasstec.05.03.04
Process control systems
glasstec.06
Contracting, consulting, engineering, services
© 2010 Messe Düsseldorf GmbH
Forehearth Boosting System
73
© 2010 Messe Düsseldorf GmbH
74
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Bohemia Machine s.r.o.
glasstec.01.03.02
Address
Phone
Zámecká 1177
582 91 Svetlá nad Sázavou
Czech Republic
This fixture is designed for handling a traditional glassmaker’s mould in the manual production of blown glass.
Its main task is to close and open the mould according to glassmaker’s wishes, and rinse and cool it after
the glass article has been blown. Using this fixture in
manual production of blown glass results in substantial
reduction of labour. Last but not least, there is a substantial reduction in consumption of water because the BM BOY is equipped
with a closed cooling circuit. The main difference of this fixture, compared to
other similar products, consists in a profound simplification of the mould mounting. This also results in much shorter time necessary for the mould exchange.
Fax
www.bohemia-machine.cz
E-Mail
info@bohemia-machine.cz
Stand
Hall 12, B21 (Page 538)
Product Overview
Drying technology
GLASSMAKER’S FIXTURE BM BOY 05 - ”tramping
device”
+420 569 453149
Internet address
Bohemia Machine s.r.o.
Bohemia Machine s.r.o.
glasstec.01.03.02
Drying technology
glasstec.01.03.04
Mixing technology
glasstec.01.03.06
Cullet preparation
glasstec.01.04.04
Smelting technology for pot furnaces
glasstec.01.06.14
Flash welding and fire polishing machines
glasstec.02.03.02.01
Decorative grinding technology for hollow glass
glasstec.21.02
Special offers for glass trade / crafts
GLASSMAKER’S FIXTURE BM BOY 05 - ”tramping
device”
This fixture is designed for handling a traditional glassmaker’s mould in the manual production of blown glass.
Its main task is to close and open the mould according to glassmaker’s wishes, and rinse and cool it after
the glass article has been blown. Using this fixture in
manual production of blown glass results in substantial
reduction of labour. Last but not least, there is a substantial reduction in consumption of water because the BM BOY is equipped
with a closed cooling circuit. The main difference of this fixture, compared to
other similar products, consists in a profound simplification of the mould mounting. This also results in much shorter time necessary for the mould exchange.
glasstec.01.03.04
Mixing technology
MIXER 150l
glasstec.21.03
Special offers for architects
© 2010 Messe Düsseldorf GmbH
75
© 2010 Messe Düsseldorf GmbH
76
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
The batch mixer BM-S-150 is designed for dry mixing of
glass batch. Maximum quantity of each batch is 150kg.
The mixing process consists in blending the batch inside the cylindrical drum that steadily rotates along its
main axis. Lower part of the drum can be separated and
moved on a simple truck to transport the batch from the
mixing machine to the glass furnace. The mixing process runs automatically and the degree of blending can
be adjusted by the mixing time. This mixing machine is convenient in combination with pot furnaces.
MIXER 150l
The batch mixer BM-S-150 is designed for dry mixing of
glass batch. Maximum quantity of each batch is 150kg.
The mixing process consists in blending the batch inside the cylindrical drum that steadily rotates along its
main axis. Lower part of the drum can be separated and
moved on a simple truck to transport the batch from the
mixing machine to the glass furnace. The mixing process runs automatically and the degree of blending can
be adjusted by the mixing time. This mixing machine is convenient in combination with pot furnaces.
glasstec.01.03.06
Cullet preparation
CRACKING OFF MACHINE P-22
CRACKING OFF MACHINE P-22
The two - station column cracking-off machine is suitable for cracking off glass articles up to 500 mm (20”)
high with a diameter of up to 250 mm (10”). The
structure of the vertical guide with two horizontal arms
equipped with burners is highly rigid and enables an
easy and accurate adjustment of the burners. The shaft
is equipped with a spring clutch that makes it easier to fix the glass article on the
rotating table. Thanks to this clutch, the rotation of the table can be stopped by
hand.
glasstec.01.06.14
Flash welding and fire polishing machines
chemical glass polishing plants
A drum-type polishing plant LZP is designed for polishing of all kinds of glass,
especially lead crystal. It is the most common glass polishing system used in
the Czech glassworks. The polishing process takes place in the drum that is
equipped with removable cases filled with products. The drum rotates, so that
the products are alternately soaked in the polishing baths (H2SO4 and HF)and
the washing bath. An exhaust system for chemical gasses, equipped with an
absorber, and a waste water neutralisation plant make inseparable parts of the
polishing plant. All the polishing process is controlled by the central PC-control
and the service control board. The programmes can be created according to
customer’s wishes. The parts coming to contact with corrosive environment are
mostly made of suitable resistant plastics.
The two - station column cracking-off machine is suitable for cracking off glass articles up to 500 mm (20”)
high with a diameter of up to 250 mm (10”). The
structure of the vertical guide with two horizontal arms
equipped with burners is highly rigid and enables an
easy and accurate adjustment of the burners. The shaft
is equipped with a spring clutch that makes it easier to fix the glass article on the
rotating table. Thanks to this clutch, the rotation of the table can be stopped by
hand.
© 2010 Messe Düsseldorf GmbH
77
© 2010 Messe Düsseldorf GmbH
78
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Bosch Rexroth AG Antriebstechnik Zahnkette
Address
Antriebstechnik Zahnkette
31028 Gronau (Leine)
Germany
Phone
+49 5182 587-0
Fax
+49 5182 587-30
Internet address
www.boschrexroth.com
E-Mail
toothchain@boschrexroth.de
Stand
Hall 14, A20 (Page 548)
glasstec.02.06.01
Vacuum coating equipment
glasstec.02.06.05
Dryers and decorating technology
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
Product Details
glasstec.01.06.06
Product Overview
glasstec.01.06.06
Edles Kristallglas braucht Antriebszahnketten von
Bosch Rexroth für hochgenaue, gleichmäßige und synchrone Antriebe. Wärmeresistent, langlebig, zuverlässig und effizient für eine Produktion ohne Ausschuß.
glasstec.01.06.12
Bottle and glass container machines
glasstec.01.09.01
Transport systems
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.02.04
Forming and bending technology
glasstec.01.06.11
Ampoule and laboratory glass machines
Antriebszahnketten
Blowing machines
Ampoule and laboratory glass machines
Blowing machines
Antriebszahnketten
Bosch Rexroth AG Antriebstechnik Zahnkette
glasstec.01.06.11
Bosch Rexroth AG Antriebstechnik Zahnkette
Biflex-Zahnketten, eine Innovation von Bosch Rexroth
für Antriebe in Ampullenmaschinen. Wärmeresistent,
langlebig, zuverlässig und effizient für eine Produktion
ohne Ausschuß.
glasstec.01.06.12
Bottle and glass container machines
Transport- und Antriebszahnketten
Effizienter produzieren mit Transportzahnketten von
Bosch Rexroth für das Maschinenband an IS-Maschinen.
Normale oder lange Teilung, immer mit zwei Bolzensystem und laserverschweißt. Langlebig, Teilungsgenau,
Wärmersistent, Verschleißfest - der optimale Transport
für Hohlglas jeder Größe, Art und Gewicht.
HPC-Zahnketten im TakeOut-Getriebe. Langlebig, verschleißarm und wärmersistent für punktgenaue, dauerhafte Bewegungen.
© 2010 Messe Düsseldorf GmbH
79
© 2010 Messe Düsseldorf GmbH
80
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.09.01
spezielle 2-teilige Wiegegelenk stellt die Rexroth-Transportzahnkette eines der
verschleißärmsten Transportsysteme überhaupt dar. Die optimierte Laschenform ermöglicht zusätzlich eine vergrößerte Gleitfläche. Bei Transportzahnketten von Rexroth werden die Lagerzapfen in den Außenlaschen laserverschweißt. Die Transportzahnketten können direkt an den Führungsleisten
geführt werden, weil der Überstand der Nietköpfe entfällt. Attribute - Laufruhe
und Geräuscharmut - gleitreibungsarmes Wiegegelenk - Antriebszahnketten mit
Geschwindigkeiten über 50 m/s - kleine Abmessungen, hoher Wirkungsgrad hohe Verschleißfestigkeit ermöglicht hohe Lebensdauer - Funktionssicherheit
und Zuverlässigkeit - Temperaturbeständigkeit bis 450°C - Zahnketten aus Edelstahl (1.4301) - Sonderlaschen zur Realisierung komplexer Transportprobleme
Transport systems
Transportzahnketten
Hohlglas, gleich welcher Größe auf dem Querband,
transportiert man zuverlässig mit Transportzahnketten
von Bosch Rexroth. Normale oder lange Teilung, immer mit 2 Bolzensystem und laserverschweißt. Langlebig, Teilungsgenau, Wärmeresistent, Verschleißfest
- für eine effiziente Produktion.
glasstec.01.13.01
Feeding and stacking systems
Sonderzahnketten
Speichersysteme für Flachglas erfordern sehr genaue
Antriebe mit hoher Wiederholgenauigkeit für einen hohen Automationsgrad. Sonderzahnketten von Bosch
Rexroth erfüllen alle Anforderungen, damit der Roboter
nicht ins Leere greift.
glasstec.01.13.02
Bottero S.p.A., Hollow Glass
Transport and handling systems
Address
Via Genova, 82
12100 Cuneo
Italy
Phone
+39-0171-310611
Fax
+39-0171-310757
Internet address
www.bottero.com
E-Mail
hollowglass@bottero.com
Stand
Hall 13, C05 (Page 540)
Transportzahnketten
Die technische Vielfalt von Transportzahnketten ermöglicht ein großes Einsatzgebiet. Ob für schweren
oder robusten Betrieb, für klein- und großflächiges
Transportgut, bearbeitete oder unbearbeitete Werkstücke,
heisse oder kalte Artikel, selbst für empfindliche Teile ist
die Zahnkette die wirtschaftliche Lösung.
Zahnketten für Antrieb und Transport
Zahnketten zeichnen sich im Vergleich zu anderen
Antriebslösungen durch ihren harmonischen, sanften
und präzisen Lauf aus. Grund dafür ist der geringe
Einlaufstoß und der gleichmäßige Verschleiß. Durch
die formschlüssige Kraftübertragung ist Schlupffreiheit
gegeben und keine Vorspannung notwendig. Der Einsatz der Zahnkette, ist auch bei sehr hohen Temperaturen möglich. Durch das
© 2010 Messe Düsseldorf GmbH
81
© 2010 Messe Düsseldorf GmbH
82
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Product Overview
Bottero S.p.A., Hollow Glass
Bottero S.p.A., Hollow Glass
glasstec.01.06.01
glasstec.01.04.02
Forehearth technology
glasstec.01.04.05
Gas equipment and supply systems
glasstec.01.04.08
Electrically heated systems
glasstec.01.06.01
Gob feeder
glasstec.01.06.12
Bottle and glass container machines
glasstec.01.06.16
Spray Systems for gob forming
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.01.12.01
Hot end coating
glasstec.01.12.02
Cold end coating
glasstec.01.13.02
Transport and handling systems
Gob feeder
HIGH SPEED FEEDER
The Feeders are designed to deliver a continuous series
of uniformly sized and shaped gobs of molten glass to
forming machine for production of containers and other
types of glassware.
glasstec.01.06.16
Spray Systems for gob forming
EGD400/450 Electronic Gob Distributor
DESCRIPTION
EGD400/450 is a high performance electronic gob distributor system for I.S.
forming machines. The EGD400/450 system is available in “stand-alone” or
COMBI version with the FMC400/450 Drive system or EPS 120 Pusher System.
In the COMBI version two systems will be housed in the same cabinet. The use
of a high-power brushlessmotor together with a sophisticated electronic control system makes it particularly suitable for this application which requires high
speed, precision and flexibility.
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.02.11.02
Replacement and spare parts
Container forming
glasstec.06
Contracting, consulting, engineering, services
Section after section the IS machine receives the gobs in the blank moulds from
the delivery system and shapes them into parisons. The parisons are then transferred to the blow side where they become bottles.
glasstec.21.03
Special offers for architects
© 2010 Messe Düsseldorf GmbH
The IS machine can be configured in many different ways according to production requirement as well as users’ preference. Therefore pneumatic mechanisms can be flexibly mixed with servo mechanisms and proportional valves can
be used to fine control the most delicate steps of the forming process.
83
© 2010 Messe Düsseldorf GmbH
84
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Electronic Forming Control
Product Details
The EFC is the electronic system that controls mechanism movements of the I.S. forming machine.
glasstec.01.06.13
Brookshaw Reed (Singapore) Pte. Ltd.
Moulds for glass production
Formen für die Glasproduktion
The operator can communicate with the system in two different
ways:
by means of a graphic interface (supervisor program) or by
means of a local hand-held terminal (Hand Held Terminal - HHT).
Brookshaw Reed (Singapore) Pte. Ltd.
Address
Phone
+65 6248 4708
Fax
+65 6249 4531
Internet address
www.brookshaw-reed.com
E-Mail
info@brookshaw-read.com
Stand
Hall 13, B13 (Page 540)
Product Overview
glasstec.01.06.13
BROTHER GLASS MOULD Co., Ltd.
Level 36, UOB Plaza 1, 80 Raffles Place
048624 Singapore
Singapore
Address
No. 11, District E, Industrial Area
215559 Jiangsu
China (Rep.)
Phone
+86 512 52508333
Fax
+86 512 52507690
Internet address
www.brother-mould.com
E-Mail
master@brother-mould.com
Stand
Hall 11, D76 (Page 536)
Brookshaw Reed (Singapore) Pte. Ltd.
Product Overview
Moulds for glass production
glasstec.01.06.13
© 2010 Messe Düsseldorf GmbH
85
BROTHER GLASS MOULD Co., Ltd.
Moulds for glass production
© 2010 Messe Düsseldorf GmbH
86
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.06.13
BROTHER GLASS MOULD Co., Ltd.
Moulds for glass production
for any type of production line over sample products, photographs, technical
drawing and sample moulds, in line with the demand of the customer.
Technical drawings and 3D models of our moulds are prepared using cam, Power
Shape, Think Desing, Power Mill ve Master Cam software and programs.
MOULD FOR GLASS INDUSTRIES
Our company use materials with ESR and certificate specially produced for glass
moulds in the products it manufactures for the production of glass table ware,
and provides products with the highest quality and standards.
MOULD FOR GLASS INDUSTRIES
Our company performs COLMONOY and STELLITE weld coating applications
in mould, plunger, ring and bottom production processes for its customers, and
provides long life products with high surface quality.
Our company, which has the highest level of process technology, uses the state
of the art, high speed 3 and 4-axle CNC milling, CNC lathe, electro-erosion machines in its production line.
BURAKCAN KALIP SANAYI VE TICARET LTD. STI
Address
Dogu Sanayi Sitesi 14 /7 Yenibosna
34197 Istanbul
Turkey
Phone
+90 212 6537500
Fax
+90 212 6539790
Internet address
www.burakcanglassmold.com.tr
E-Mail
info@burakcanglassmold.com.tr
Stand
Hall 13, F37 (Page 540)
Product Overview
glasstec.01.06.13
Bystronic Armatec GmbH
BURAKCAN KALIP SANAYI VE TICARET LTD. STI
Moulds for glass production
Product Details
glasstec.01.06.13
Our company, which works with the principle of cover the expectations of our
customers at the highest level with its high quality workmanship and timely delivery program, makes modifications on used moulds and those which require
modification and thus provides services in this field.
BURAKCAN KALIP SANAYI VE TICARET LTD. STI
Moulds for glass production
Address
Richard-Stücklen Straße 19
91710 Gunzenhausen
Germany
Phone
+49-9831-5002-0
Fax
+49-9831-5002-20
Internet address
www.bystronic-glass.com
E-Mail
armatec@bystronic-glass.com
Stand
Hall 14, E24 (Page 548)
glassmould
Mould designs are made by our experienced engineers with the continuously
innovated CAD / CAM technology. Our company performs mould design suitable
© 2010 Messe Düsseldorf GmbH
87
© 2010 Messe Düsseldorf GmbH
88
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Company News
05/06/2010
Bystronic Armatec GmbH
Innovative techniques for module production
A large part of manufacturing for photovoltaic modules
incorporates handling and processing glass. Bystronic
glass makes a significant contribution in all areas to
ensure that the systems run smoothly and effectively.
The German-Swiss company is entirely at home processing glass: For more than 40 years it has been recognized for providing innovative machines, systems and services in glass processing. From basic components to automated, customer-specific complete solutions, Bystronic glass offers extraordinary concepts with unsurpassed quality
– and the same applies to the Solar Industry.
Edge grinding of glass substrates Cleanly ground edges of substrates are absolutely essential to ensure a smooth production process for solar modules. High
edge quality free from cracks and shell defects is the only way to prevent glass
breakage during the process. This is an important pre-condition for efficient and
economical production since glass breakage is a relevant cost factor and always
means a stoppage of the system. Whenever glass breakage occurs, the production systems must be run empty and cleaned. Then production has to be
resumed again. ”Grinding machines from Bystronic glass stand for the highest
quality in ground glass edges. For many years the company has established a
strong reputation and successful track record with machines of similar design
for the automotive industry,” explains Markus Lipp Sales Manager and Project
Engineer in the Swiss Bystronic glass Technology Center. champ’speedgrind
makes it possible to grind edges from a minimum finished dimension of 200 mm
x 200 mm to a maximum finished dimension of 2200 mm x 2600 mm with C grind
or K grind. The yield is 99.5 percent.
Thanks to a mineral cast machine bed, champ’speed-series machines are completely vibration-free and can therefore provide the greatest precision. Substrates can be ground with extremely fine tolerances of +/- 0.1 mm on absolutely perpendicular sides, even if the starting substrate has large deviations in
the angles. As the machines are designed as polar grinding machines with a
play-free table, both edges and corners are polished in one pass, with radius or
facet. All axes are equipped with maintenance-free and highly dynamic CNC direct drives. The new spindle design works in seconds with two grinding wheels
arranged one over the other. ”Additional time advantages are derived first from
an automatic correction of the grinding wheel diameter, with changeover to another module series or substrate size taking less than five minutes, for example,
as well as from the use of an automatic changing system for grinding wheels,“
© 2010 Messe Düsseldorf GmbH
89
comments Markus Lipp in Machine Technology. Thanks to the modular layout of
the series, champ’speed machines can be expanded to create large manufacturing cells with an integrated handling device and additional drilling machine.
Applying backrails automatically Backrails are used to fasten thin layer modules
in place and to provide stability for modules with especially large surfaces. Tape
or liquid adhesive is applied to modules of all sizes for this purpose. Bystronic
glass Technology Center Bystronic Armatec provides semi or fully automatic
systems for processing and applying backrails. They are available as a stand
alone solution or can be integrated into existing lines. ”Depending on the module
size, up to four rails can be placed on one module at the same time, or four rails
can be placed on two modules in twin mode. This process facilitates the shortest
cycle times,“ explains Thomas Ommerle Sales Engineering Solar at Bystronic
Armatec. Depending on the rail being processed, positioning accuracy is +/- 0.5
mm.
Bystronic glass provides customers with a system that positions backrails extremely efficiently. First the modules are automatically positioned in pairs on
the system. Preparation of the backrails runs in parallel to this process with removal of the rails from a cassette, cleaning, application of primer and adhesive
and finally transfer to the assembly line. The rails are automatically positioned
and placed on the back of the module. Then the backrails are pressed into
place according to the type of adhesive used. In the sorting system, modules
are temporarily separated and stored vertically according to performance class.
”As soon as the appropriate number for a packaging unit is reached, the system automatically moves the modules on to the next station.” Thomas Ommerle
describes the range of options: ”Professional packaging is available both horizontally with an automatic spacer insert and vertically in cardboard packaging
with corresponding separating combs.”
05/06/2010
Efficient buffering, storing and sorting of photovoltaic
modules
The market leader in the field of sorting systems for
glass now also offers customer-specific solutions for
the solar industry. Therefore, Bystronic glass’s decades
of experience in such systems, for example in insulating glass production now also applies to the handling
of substrates or ready-made modules.
Bystronic glass offers sorting systems for buffer operation or the direct connection to a production line for thin-film solar modules. Customers obtain modular configurable solutions designed to meet their individual production requirements. ”The sorting systems can be used in the front end for de-coupling the
© 2010 Messe Düsseldorf GmbH
90
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
different production processes from each other as well as at the back end for
sorting the ready-made modules prior to packaging,” explains Pieder Berther,
project engineer in the sales department of the Bystronic glass Technology Center Bystronic Maschinen AG.
The buffer and storage system Depending on size and composition, the substrates are stored either vertically, at an angle of 6°, or horizontally. Loading
and unloading is carried out by means of conveyors, sorting carriages or robots.
Depending on customer requirements, this can be done either according to the
storing sequence (first-in, first-out principle), against the storing sequence (firstin, last-out principle) or individually in any order. The fixed storage systems or
cartridges have more than 120 positions, which can be managed in a high-bay
warehouse. ”Our buffer and storage system is suitable for the storage of both
substrates as well as ready-made modules with back rails and junction box – for
all conventional glass sizes up to 2.20 x 2.60 metres,” explains Pieder Berther.
The system’s cycle times can be adjusted according to the performance of the
production line.
The sorting system In order to sort ready-made photovoltaic modules according
to quality, performance classes, physical sizes or other features a sorting operation is required: After leaving production in the sequence of manufacture, the
modules are temporarily stored and then removed at the appropriate time according to the sorting criteria. It is possible to integrate a number of inspection
processes in advance – i.e. at the end of the production process and prior to
storage and / or sorting. The sorted modules subsequently arrive at the automatic packing station.
”The buffer and storage system as well as the sorting system are characterised
by solid design, high positioning accuracy and gentle handling of substrates and
/ or modules,” Pieder Berther comments to highlight the features of the proven
Bystronic glass quality. Apart from these mechanical advantages, the systems
are also equipped with their own control system for seamless object tracking,
including interfaces to the different processes and the MES (manufacturing execution system).
05/06/2010
Ergonomic glass handling: Lightweight top crane
systems – for easy handling
”Handling equipment is only popular if it is easy to use,” states
Stefan Herrmann, Branch Manager at Semcoglas in Nordhorn,
commenting directly about a reason to provide the entire production hall with handling systems from the Bystronic glass group.
The entire hall at Nordhorn in Lower Saxony, which was commissioned in spring 2008, has a framework of lightweight top
crane systems and lifts from the Bystronic glass Technology
Center Bystronic Armatec. ”At that time, the company asked
for a fast and secure glass handling system, which could even be used by inexperienced operators,” explains Dietmar Weichsel, who is selling Bystronic glass
handling equipment in northern Germany. For this reason, he suggested a combination of equipment for moving light and heavy glass plates at a single work
station. With this system, he met exactly the needs of the customer, for whom
the safety of his employees is of paramount importance.
User-friendly equipment ”We want colleagues to move even the lightest of loads
with handling equipment and this can be achieved only if the equipment is easy
to use”, reports Stefan Herrmann from his experience. The Branch Manger especially appreciates the Easy-Lift from Bystronic glass: ”Its thick hoisting tube,
which compresses the air, allows extremely accurate operation,” he explains and
demonstrates this fact on the glass loader of the production line for laminated
safety glass. In general, the handling equipment of the Easy-Lift type is characterised by its rigid connection between the suction frame and the crane track,
facilitating exact positioning of the glass lites. At the same time, the aluminium
construction keeps the weight of the equipment itself to a minimum.
An overview of the product range However, Semcoglas is not only working with
the Easy-Lift from Bystronic glass. During the planning of the approximately
15,000 m2 production facility in Nordhorn, the Swiss-German supplier of system solutions for the manufacture of architectural and automotive glass was involved from the very beginning. This provides visitors to the Nordhorn-based
Semcoglas factory with a good overview of Bystronic glass’ handling systems
product range: Single and two-column lifts, manipulators and suction frames,
each running on lightweight top crane systems – almost all variants are available. ”Thanks to the excellent advisory service, the selection of products and
equipment for the entire hall this installation was extremely simple,” Stefan Herrmann reports during the guided tour through the hall.
The excellent business relationship goes back more than ten years: At that
time, Semcoglas purchased a number of companies in which handling equipment from the Technology Center Bystronic Armatec was already in use. Today,
© 2010 Messe Düsseldorf GmbH
91
© 2010 Messe Düsseldorf GmbH
92
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
the company is active in 24 locations at home and abroad – from glass cutting
via screen printing to the production of insulating and laminated safety glass,
the group is serving the entire value chain of glass. In doing so, machines of
the Bystronic glass group are being used in almost every location. ”In Nordhorn alone, we installed around 40 handling systems and suitable lightweight
top crane systems,” Dietmar Weichsel reports. In addition, there are lines for
insulating and laminated safety glass production.
Advantageous handling The reasons for the continuation of the business relationship are obvious: “The products are convincing and save space especially
the handling systems and can be used according to individual requirements because of their modular design,” explains Stefan Herrmann. And last but not
least, this also includes the excellent service, as he points out. ”A relationship of
trust is important to us. We greatly appreciate that a brief phone call will suffice
for a member of the service staff to address the issue shortly afterwards. It is
important to have a contact partner who has the technical expertise and is 100
% reliable at the same time.”
05/06/2010
Customer Service 2.0 at Bystronic Lenhardt
In line with all new plants, the Bystronic Lenhardt
GmbH which is part of Bystronic glass Group, has
now launched an optimised, spare-parts catalogue tailored specifically for customer machines. “In CD-ROM
format this enables customers to easily identify the
required parts and order them directly online. This
speeds up the entire delivery process while helping to prevent any wrong orders”,
Harry Auer, Head of Customer Service summed up regarding the improvement.
The manufacturer of machines and plants for insulating glass production has
provided a spare parts catalogue on CD-ROM for eight years now. “The parts
catalogue is recognised by customers as an extremely useful tool having become firmly established with our customers,” Harry Auer was pleased to report.
However, there were various reasons for a modernisation: thanks to an improved search feature, which not only sorts keywords and machine structure,
but which can also search various categories. The user can now find the appropriate machine part far more easily. Now, for example, wear parts such as
seals or rollers can be collected into a group, while durable machine parts such
as motors or bearings are located in their own specific category.
Intuitive Operation Each individual spare part is accompanied by a photo which
immediately appears to the customer in the overview. “This not only makes it
easier to identify the correct part, it is also in line with the current standards familiar to users in online shops”, explained the Head of Bystronic Lenhardt Service.
© 2010 Messe Düsseldorf GmbH
93
In view of this the visual display and navigation also underwent a complete redesign. Customers can place the required parts into the shopping cart at the
click of a mouse and then confirm the order straight away online. The customer
is then immediately sent an order confirmation email. Alternatively, customers
can also request an offer to match their requirements before actually making an
order.
To ensure that the new spare parts catalogue is practice-oriented and userfriendly, Bystronic Lenhardt GmbH actively involved several customers in the
development process: this enabled them to test the improved service throughout autumn 2009 for the first time, after which they offered their opinion. At the
same time consideration was given to the fact that over the past few years users’
habits have also changed in relation to internet browsers used: the new catalogue display and the online ordering process function fully independently of the
actual internet browser used.
07/21/2010
New Investment into Bystronic glass Machines
Neuhausen-Hamberg (Germany), July 19, 2010. The
glass processor Hansen Glass, based in the UK town
of Kirkby, modernised its insulating glass production
with the acquisition of a spacerbender COMBI from
Bystronic glass. Alongside the frame-bending robot
made of stainless steel, ideally suited for stainlesssteel and plastic-stainless composite spacer bar profiles, the British glass processor also invested in a matching desiccant filling station and a butyl applicator.
After enjoying some excellent experience with cutting solutions made by the
German-Swiss specialists in glass-processing machines, Hansen Glass once
again decided to go for Bystronic glass quality products. “We are fully satisfied
with every Bystronic glass machine, from the quotation phase through delivery
and on to commissioning”, explains Keith Hibbert of Hansen Glass in Kirkby near
Liverpool. The company has been in contact with Bystronic glass since 2000:
back then Hansen Glass purchased a solution for loading and glass customization that is still being used today. Keith says: “Right from the very start up to the
present day, this system has more than fulfilled all our expectations. We use it
five days a week, with three daily shifts and we are particularly impressed by the
reliability of the machines.”
Investment in the Future For Hansen Glass this current investment is of major
significance: for many reasons, including legal regulations, the company decided at the end of 2009 to convert from manual preparation of spacer frames in
insulating glass production to state-of-the-art machine technology. The new machines were commissioned at the start of January this year. This means that the
© 2010 Messe Düsseldorf GmbH
94
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
company is now able to continuously manufacture top-quality insulating glass
units – and to do so without any fluctuations in production. However, it wasn’t
just the machine technology that clinched the decision for the investment: “As
far as we were concerned, the experience we had in terms of the excellent aftersales service and the intensive level of cooperation with Bystronic glass during
the quotation phase, were vital criteria”, recalls Keith who is perfectly glad to
back up the outstanding reputation that Bystronic glass enjoys in the branch.
05/06/2010
Bystronic glass Wins Large Order in Saudi Arabia
The Bystronic glass Group has received a large multimillion Swiss francs order from Saudi Arabia. As 2009
drew to a close, Richard Jakob and Fahad Al-Harbi,
Chairman of the Wajhat Glass & Aluminium Factory
as well as Vice Chairman and CEO of the Al Harbi
Holding, finalized the deal with the system’s installation scheduled to begin in April 2010.
“Bystronic glass will be supplying all the equipment for a new production hall
to be built in the Arabian desert”, Richard Jakob, CEO of the Bystronic glass
Group, commented. He went on to explain: “The hall will be handed over to the
customer for immediate occupancy - a project of this magnitude is both exceptional and fascinating.” The order also incorporates a cutting and sorting system, a fully-automated insulating glass line, handling systems along with lines
for production of laminated safety glass and tempered glass. This will be the
first installation of its kind where the system is directly connected to the furnace and insulating-glass line with an expansion option for the sorting system
to include other processes. Until now, the Wajhat Glass & Aluminium Factory,
which is a company of the Saudi Marble & Granite Factory Co., has concentrated
on processing marble and granite – the acquisition of the Bystronic glass systems marks their entrance into the glass industry. The decision to commission
Bystronic glass to fully equip the hall was made by the Saudi Arabian company
on the basis of the quality on offer: Machines from the Bystronic glass Technology Center Bystronic Lenhardt GmbH had already left a very positive impression
in the past on Fahad Al-Harbi’s advisors.
06/14/2010
Relaunch: 2nd generation Bystronic glass
compact’sealer
KÖWA Isolierglas GmbH in Wackersdorf, Germany, has been
working with the first Bystronic glass second generation compact’sealer since the beginning of 2010. “We were won over by
both the machine’s capabilities as well as the fast, expert service provided by Bystronic glass,” explained KÖWA’s Managing
Director, Klaus Köhler.
The compact’sealer was originally designed as a start-up solution for automatic sealing of insulating glass units. As it has
been in the industry for almost 40 years “start-up” is hardly the word to use to
describe KÖWA, a member of the Uniglas group, and manufacturer of insulating glass. When they made contact with Bystronic glass they had already been
producing the product on two insulating glass lines for many years; the larger
of these lines was modernised only last year and equipped with the latest machines from Bystronic glass. The smaller of the two lines then needed a new
sealing robot, which had to fit exactly into the available space. So the company,
based in Eastern Bavaria, decided on the compact version of the sealing robot,
among other things, because of the machine depth. “Bystronic glass was able
to produce good references and ultimately convinced us not only about the machine’s technology, but also in respect of the personal advice given to us by their
expert sales team,” recalled Klaus Köhler.
compact’sealer with new technical details Besides the compact’sealer’s proven
functions including a volume-controlled and easily accessible dosing system, nocontact conveyor through an air cushion rear wall, and a quick-release closure
system for rapid nozzle changing, the latest version of the machine has a few
extra technical details. By using a metal spatula which was already in use on
its “big brother” – the “sealer” sealing robot, which locks the corners during the
injection process, it is possible to achieve a much better quality at the corners.
Furthermore, an additional feeler ensures even more accurate calculation of the
required quantity of sealing material - even when the space between lites is
uneven it is impossible to dispense too much, with resultant spillage. A special
coating on the mixer prevents the sealing material from sticking and extends the
intervals between cleaning. By implementing high-performance materials with
outstanding surface qualities, the dosing unit’s service life is also extended.
Compact and simply fast The staff at KÖWA are extremely pleased with the way
the new compact’sealer operates. “It’s a completely new generation of machine,
that has made our work much easier,” reported Peter Tauber, who, with Cornelia
Krempl, is joint Production Manager at KÖWA. He added: “The machine is controlled on a 3D interface with sliders, so it’s easy to operate and very accurate
© 2010 Messe Düsseldorf GmbH
95
© 2010 Messe Düsseldorf GmbH
96
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
even while wearing gloves. Just one person can quickly change the material
drums, and the nozzles are flushed by simply actuating the operator knob while
in automatic mode.” The dosing pistons on the two materials components are
synchronised during the mixing process. This means that in automatic operation it is possible to utilise the maximum amount of material available, therefore
avoiding machine stoppages.
“On our smaller line we seal insulating glass units in very many standard sizes,”
continued Klaus Köhler, who last year saw a distinct increase in demand for triple
insulating glass units – from a 10 percent share in 2008 to 2 percent in 2009. To
meet this demand the sealing robot needed to be able to provide a high quality
seal quickly and evenly, even on triple units. “With the compact’sealer we have
acquired a machine that perfectly meets all our requirements,” explained Production Manager Peter Tauber. In addition to the compact sealing robot, KÖWA
has also been operating on the Bystronic glass insulating glass line mentioned
at the beginning of this article since last year, with the company producing units
up to 4.00 metres in length.
07/05/2010
Top Secret Innovations at the Bystronic glass Stand:
Innovative and flying high at glasstec 2010
The Bystronic glass Group will be presenting numerous innovations at the glasstec trade fair that is taking place in Düsseldorf from 28 September to 1 October 2010. Richard Jakob, CEO of the Bystronic glass
Group revealed: “In addition to numerous new and
more sophisticated machines, we will also be presenting our customers with some exclusive innovations in our TOP SECRET area“.
This closed area will only be accessible to invited or registered guests when
accompanied by the Bystronic glass sales staff.
On its stand which covers an area of 1,200 square metres, Bystronic glass will
be presenting system solutions for glass processing in the areas of building and
automotive glass, not forgetting the solar industry. Moderated live machine presentations will enable visitors to gain an insight into the fascinating technologies.
A small oasis of tranquillity will be situated in the centre of the stand in the ecolounge; here interested visitors can learn about the Bystronic glass commitment
motto “Living for the Future“ and also relax a little.
“We want to fly high this year – and this is never more true than for glasstec“,
explained Richard Jakob. Thanks to the two-storey construction, the visitors in
the upper catering area will have a good view of the entire stand as well as the
areas of Bystronic glass expertise: 1. Glass cutting The focus will be on the
efficient sorting concept, first’sort and speed’lamicut, the newly developed cut-
© 2010 Messe Düsseldorf GmbH
97
ting plant for laminated glass which includes numerous remarkable functions. 2.
Laminated glass manufacturing Bystronic glass will be presenting the horizontal
washer, a new horizontal glass washing machine which has been especially designed for laminated glass but has the flexibility to be used in other production
areas. 3. Insulating glass manufacturing Decades of experience and numerous
pioneering developments make Bystronic glass a highly qualified warm edge
expert. As the only provider, the corporate group can offer its customers automated solutions for all of the standard warm edge spacers. Visitors will for example be able to see applications of the trendsetting TPS® technology as well as
the Super Spacer® on stand. 4. Handling equipment Bystronic glass traditionally offers a large range of efficient handling equipment for flat glass and plate
processing. Visitors can try out numerous lifts and suction frames on the stand
themselves. 5. Solar technology No matter whether pre-processing, front-end
or back-end: Bystronic glass has the right solar technology solution! With the
photovoltaic TPA it is possible to effectively protect PV thin film modules from
moisture prior to the laminating process. Furthermore, the film trimmer enables
an automatic trimming of projections to be carried out prior to lamination. 6.
Automotive glass pre-processing Bystronic launched a completely new generation of machines for the pre-processing of automotive glass, the champ’speed
line, in spring 2010. A video presentation provides an insight into the machine
technology from various views. 7. Window manufacturing With a multimedia
presentation, Bystronic glass will be presenting the latest developments and efficient solutions in its latest core competence window manufacturing. 8. Service
& Support For Bystronic glass, customer proximity and a worldwide after-sales
support are inseparably connected to each other. At glasstec 2010, Bystronic
glass will be devoting itself to this important subject with its own competence
corner. Here, those who are interested can find out more about the subjects
hotline, spare parts catalogue, service agreements and training courses.
05/06/2010
Faster and More Precise Automotive Glass
Preprocessing
With its champ’speed line, Bystronic glass is launching onto the market a brand-new generation of machines for preprocessing automotive glass. The line
enables cutting, breaking, grinding and drilling of automotive glass with the utmost precision and flexibility.
“The champ’speed line is currently the fastest machine
of its quality on the market”, says Jean-Philippe Chételat, Sales Manager for the
Automotive Glass Sector at the Technology Center Bystronic Maschinen AG in
Switzerland.
“We have listened to our customers’ demands and now – with the champ’speed
© 2010 Messe Düsseldorf GmbH
98
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
line – we have adapted our system solution for preprocessing automotive glass
for the latest market requirements”, explaines Jean-Philippe Chételat. All the
modules in the machine are individually matched to each other, the movements
can be separately configured and, for example, optimized with regard to cycle
time. The extremely stable, vibration-free process means that customers can
work for many years with a consistently high quality level. “With a repeat accuracy of up to 99 percent, the champ’speed line outshines every other machine
available on the market”, the Sales Manager is pleased to report. As all the machine parts are within easy reach, working with the new system is an extremely
ergonomic process.
Customized, Intelligent State-of-the-art Technology The heart of the system is
the cutting and breaking unit. The cutting module contains a maintenance-free
AC servo direct drive. Thanks to faster acceleration, it operates extremely dynamically with simultaneous maximum cutting accuracy. While doing so the
machine automatically optimizes its speed to match the shape to be cut. Precutting of the glass lite along with shape cutting and breaking is conducted in two
process steps and therefore enables parallel processing. This in turn results in
a definitive cycle time advantage along with high productivity. In addition to this,
the use of a special, maintenance-free breaking tool guarantees perfect quality
of the edge breaks.
Maximum Grinding Standard The grinding module can simultaneously use two
grinding wheels enabling a fast bit change. “This means that, for example, automotive glass can be ground in different edge radii, without any need to change
the tool in between”, explains Jean-Philippe Chételat. As with the cutting module, the grinder module’s rotating table is equipped with a maintenance-free
CNC direct drive that operates with extreme precision without any play. Additional technical advantages are the automated system for height adjustment
of the grinding wheel and a new, efficient cooling system, which ensures that
the glass remains dry during processing.
saving, while also systematically committing to the “Living for the Future” ecological concept as introduced at the glasstec 2008.
Product Overview
Bystronic Armatec GmbH
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.02.01.01.02
Cutting technology for laminated safety glass
glasstec.02.09.02.01
Laminated glass technology with foil for architectural
glass
glasstec.03.04.01.02
PV system components
Product Details
glasstec.01.13.01
Bystronic Armatec GmbH
Feeding and stacking systems
Automatic loading systems
glasstec.01.13.02
Transport and handling systems
Handling equipment
Rational handling equipment for all sectors of sheet and
flat glass processing
With its champ’speed line, Bystronic glass provides not only a machine for preprocessing automotive glass but also one for processing glass in solar technology as well as for domestic appliances. “As market leader we guarantee
the highest production and quality standards providing maximum productivity,
outstanding performance, stringent tolerances in grinding precision and perfect
edge-processing technology”, says the Sales Manager.
Bystronic glass’ handling equipment characteristic features: - careful handling of load - ergonomics and safety
- minimized effort for the operator - time saving and cost reduction in manufacturing process
Living for the Future Alongside the technical advantages the champ’speed line
has an additional benefit: 20 percent of the energy used is recycled back into
the production process. While the system’s drives are braking, Bystronic glass
converts kinetic energy into electrical energy and feeds it back into the network.
This way, Bystronic glass upholds its “Preprocessing of Automotive Glass” core
competence in respect of sustainability, conservation of resources and energy
- Two-column lifts Equipment for large, heavy glass plates, rigid guidance of the
load by hoisting telescope, up to 1.000 kg
© 2010 Messe Düsseldorf GmbH
99
- One-column lifts Low own weight, rigid guidance of the load by hoisting telescope, up to 500 kg
- Manipulators Flexible use in different hoisting gears, up to 5.000 kg
- Suction frames Basic equipment for vertical transport, up to 2.500 kg
- Accumulator-driven suction Autarkical equipment for mobile use, up to 600 kg
© 2010 Messe Düsseldorf GmbH
100
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
- Crane systems X-Y- craneways and slewing cranes in lightweight construction
- Special applications for curved glass lites, extremely large glass formats, loading from CNC centers or screen printing machines
Bystronic Maschinen AG
Address
Industriestraße 5
CH-4922 Bützberg
Switzerland
Phone
+41-62-958-7777
Fax
+41-62-958-7676
Internet address
www.bystronic-glass.com
E-Mail
bystronic@bystronic-glass.com
Stand
Hall 14, E24 (Page 548)
with every Bystronic glass machine, from the quotation phase through delivery
and on to commissioning”, explains Keith Hibbert of Hansen Glass in Kirkby near
Liverpool. The company has been in contact with Bystronic glass since 2000:
back then Hansen Glass purchased a solution for loading and glass customization that is still being used today. Keith says: “Right from the very start up to the
present day, this system has more than fulfilled all our expectations. We use it
five days a week, with three daily shifts and we are particularly impressed by the
reliability of the machines.”
Investment in the Future For Hansen Glass this current investment is of major
significance: for many reasons, including legal regulations, the company decided at the end of 2009 to convert from manual preparation of spacer frames in
insulating glass production to state-of-the-art machine technology. The new machines were commissioned at the start of January this year. This means that the
company is now able to continuously manufacture top-quality insulating glass
units – and to do so without any fluctuations in production. However, it wasn’t
just the machine technology that clinched the decision for the investment: “As
far as we were concerned, the experience we had in terms of the excellent aftersales service and the intensive level of cooperation with Bystronic glass during
the quotation phase, were vital criteria”, recalls Keith who is perfectly glad to
back up the outstanding reputation that Bystronic glass enjoys in the branch.
05/06/2010
Company News
07/21/2010
Bystronic Maschinen AG
New Investment into Bystronic glass Machines
Neuhausen-Hamberg (Germany), July 19, 2010. The
glass processor Hansen Glass, based in the UK town
of Kirkby, modernised its insulating glass production
with the acquisition of a spacerbender COMBI from
Bystronic glass. Alongside the frame-bending robot
made of stainless steel, ideally suited for stainlesssteel and plastic-stainless composite spacer bar profiles, the British glass processor also invested in a matching desiccant filling station and a butyl applicator.
After enjoying some excellent experience with cutting solutions made by the
German-Swiss specialists in glass-processing machines, Hansen Glass once
again decided to go for Bystronic glass quality products. “We are fully satisfied
© 2010 Messe Düsseldorf GmbH
101
Faster and More Precise Automotive Glass
Preprocessing
With its champ’speed line, Bystronic glass is launching onto the market a brand-new generation of machines for preprocessing automotive glass. The line
enables cutting, breaking, grinding and drilling of automotive glass with the utmost precision and flexibility.
“The champ’speed line is currently the fastest machine
of its quality on the market”, says Jean-Philippe Chételat, Sales Manager for the
Automotive Glass Sector at the Technology Center Bystronic Maschinen AG in
Switzerland.
“We have listened to our customers’ demands and now – with the champ’speed
line – we have adapted our system solution for preprocessing automotive glass
for the latest market requirements”, explaines Jean-Philippe Chételat. All the
modules in the machine are individually matched to each other, the movements
can be separately configured and, for example, optimized with regard to cycle
time. The extremely stable, vibration-free process means that customers can
work for many years with a consistently high quality level. “With a repeat accuracy of up to 99 percent, the champ’speed line outshines every other machine
© 2010 Messe Düsseldorf GmbH
102
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
available on the market”, the Sales Manager is pleased to report. As all the machine parts are within easy reach, working with the new system is an extremely
ergonomic process.
Customized, Intelligent State-of-the-art Technology The heart of the system is
the cutting and breaking unit. The cutting module contains a maintenance-free
AC servo direct drive. Thanks to faster acceleration, it operates extremely dynamically with simultaneous maximum cutting accuracy. While doing so the
machine automatically optimizes its speed to match the shape to be cut. Precutting of the glass lite along with shape cutting and breaking is conducted in two
process steps and therefore enables parallel processing. This in turn results in
a definitive cycle time advantage along with high productivity. In addition to this,
the use of a special, maintenance-free breaking tool guarantees perfect quality
of the edge breaks.
Maximum Grinding Standard The grinding module can simultaneously use two
grinding wheels enabling a fast bit change. “This means that, for example, automotive glass can be ground in different edge radii, without any need to change
the tool in between”, explains Jean-Philippe Chételat. As with the cutting module, the grinder module’s rotating table is equipped with a maintenance-free
CNC direct drive that operates with extreme precision without any play. Additional technical advantages are the automated system for height adjustment
of the grinding wheel and a new, efficient cooling system, which ensures that
the glass remains dry during processing.
With its champ’speed line, Bystronic glass provides not only a machine for preprocessing automotive glass but also one for processing glass in solar technology as well as for domestic appliances. “As market leader we guarantee
the highest production and quality standards providing maximum productivity,
outstanding performance, stringent tolerances in grinding precision and perfect
edge-processing technology”, says the Sales Manager.
Living for the Future Alongside the technical advantages the champ’speed line
has an additional benefit: 20 percent of the energy used is recycled back into
the production process. While the system’s drives are braking, Bystronic glass
converts kinetic energy into electrical energy and feeds it back into the network.
This way, Bystronic glass upholds its “Preprocessing of Automotive Glass” core
competence in respect of sustainability, conservation of resources and energy
saving, while also systematically committing to the “Living for the Future” ecological concept as introduced at the glasstec 2008.
© 2010 Messe Düsseldorf GmbH
103
05/06/2010
Innovative techniques for module production
A large part of manufacturing for photovoltaic modules
incorporates handling and processing glass. Bystronic
glass makes a significant contribution in all areas to
ensure that the systems run smoothly and effectively.
The German-Swiss company is entirely at home processing glass: For more than 40 years it has been recognized for providing innovative machines, systems and services in glass processing. From basic components to automated, customer-specific complete solutions, Bystronic glass offers extraordinary concepts with unsurpassed quality
– and the same applies to the Solar Industry.
Edge grinding of glass substrates Cleanly ground edges of substrates are absolutely essential to ensure a smooth production process for solar modules. High
edge quality free from cracks and shell defects is the only way to prevent glass
breakage during the process. This is an important pre-condition for efficient and
economical production since glass breakage is a relevant cost factor and always
means a stoppage of the system. Whenever glass breakage occurs, the production systems must be run empty and cleaned. Then production has to be
resumed again. ”Grinding machines from Bystronic glass stand for the highest
quality in ground glass edges. For many years the company has established a
strong reputation and successful track record with machines of similar design
for the automotive industry,” explains Markus Lipp Sales Manager and Project
Engineer in the Swiss Bystronic glass Technology Center. champ’speedgrind
makes it possible to grind edges from a minimum finished dimension of 200 mm
x 200 mm to a maximum finished dimension of 2200 mm x 2600 mm with C grind
or K grind. The yield is 99.5 percent.
Thanks to a mineral cast machine bed, champ’speed-series machines are completely vibration-free and can therefore provide the greatest precision. Substrates can be ground with extremely fine tolerances of +/- 0.1 mm on absolutely perpendicular sides, even if the starting substrate has large deviations in
the angles. As the machines are designed as polar grinding machines with a
play-free table, both edges and corners are polished in one pass, with radius or
facet. All axes are equipped with maintenance-free and highly dynamic CNC direct drives. The new spindle design works in seconds with two grinding wheels
arranged one over the other. ”Additional time advantages are derived first from
an automatic correction of the grinding wheel diameter, with changeover to another module series or substrate size taking less than five minutes, for example,
as well as from the use of an automatic changing system for grinding wheels,“
comments Markus Lipp in Machine Technology. Thanks to the modular layout of
the series, champ’speed machines can be expanded to create large manufac-
© 2010 Messe Düsseldorf GmbH
104
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
turing cells with an integrated handling device and additional drilling machine.
Applying backrails automatically Backrails are used to fasten thin layer modules
in place and to provide stability for modules with especially large surfaces. Tape
or liquid adhesive is applied to modules of all sizes for this purpose. Bystronic
glass Technology Center Bystronic Armatec provides semi or fully automatic
systems for processing and applying backrails. They are available as a stand
alone solution or can be integrated into existing lines. ”Depending on the module
size, up to four rails can be placed on one module at the same time, or four rails
can be placed on two modules in twin mode. This process facilitates the shortest
cycle times,“ explains Thomas Ommerle Sales Engineering Solar at Bystronic
Armatec. Depending on the rail being processed, positioning accuracy is +/- 0.5
mm.
Bystronic glass provides customers with a system that positions backrails extremely efficiently. First the modules are automatically positioned in pairs on
the system. Preparation of the backrails runs in parallel to this process with removal of the rails from a cassette, cleaning, application of primer and adhesive
and finally transfer to the assembly line. The rails are automatically positioned
and placed on the back of the module. Then the backrails are pressed into
place according to the type of adhesive used. In the sorting system, modules
are temporarily separated and stored vertically according to performance class.
”As soon as the appropriate number for a packaging unit is reached, the system automatically moves the modules on to the next station.” Thomas Ommerle
describes the range of options: ”Professional packaging is available both horizontally with an automatic spacer insert and vertically in cardboard packaging
with corresponding separating combs.”
05/06/2010
Efficient buffering, storing and sorting of photovoltaic
modules
The market leader in the field of sorting systems for
glass now also offers customer-specific solutions for
the solar industry. Therefore, Bystronic glass’s decades
of experience in such systems, for example in insulating glass production now also applies to the handling
of substrates or ready-made modules.
The buffer and storage system Depending on size and composition, the substrates are stored either vertically, at an angle of 6°, or horizontally. Loading
and unloading is carried out by means of conveyors, sorting carriages or robots.
Depending on customer requirements, this can be done either according to the
storing sequence (first-in, first-out principle), against the storing sequence (firstin, last-out principle) or individually in any order. The fixed storage systems or
cartridges have more than 120 positions, which can be managed in a high-bay
warehouse. ”Our buffer and storage system is suitable for the storage of both
substrates as well as ready-made modules with back rails and junction box – for
all conventional glass sizes up to 2.20 x 2.60 metres,” explains Pieder Berther.
The system’s cycle times can be adjusted according to the performance of the
production line.
The sorting system In order to sort ready-made photovoltaic modules according
to quality, performance classes, physical sizes or other features a sorting operation is required: After leaving production in the sequence of manufacture, the
modules are temporarily stored and then removed at the appropriate time according to the sorting criteria. It is possible to integrate a number of inspection
processes in advance – i.e. at the end of the production process and prior to
storage and / or sorting. The sorted modules subsequently arrive at the automatic packing station.
”The buffer and storage system as well as the sorting system are characterised
by solid design, high positioning accuracy and gentle handling of substrates and
/ or modules,” Pieder Berther comments to highlight the features of the proven
Bystronic glass quality. Apart from these mechanical advantages, the systems
are also equipped with their own control system for seamless object tracking,
including interfaces to the different processes and the MES (manufacturing execution system).
05/06/2010
Bystronic glass offers sorting systems for buffer operation or the direct connection to a production line for thin-film solar modules. Customers obtain modular configurable solutions designed to meet their individual production requirements. ”The sorting systems can be used in the front end for de-coupling the
different production processes from each other as well as at the back end for
sorting the ready-made modules prior to packaging,” explains Pieder Berther,
© 2010 Messe Düsseldorf GmbH
project engineer in the sales department of the Bystronic glass Technology Center Bystronic Maschinen AG.
105
Bystronic glass Wins Large Order in Saudi Arabia
The Bystronic glass Group has received a large multimillion Swiss francs order from Saudi Arabia. As 2009
drew to a close, Richard Jakob and Fahad Al-Harbi,
Chairman of the Wajhat Glass & Aluminium Factory
as well as Vice Chairman and CEO of the Al Harbi
Holding, finalized the deal with the system’s installation scheduled to begin in April 2010.
“Bystronic glass will be supplying all the equipment for a new production hall
to be built in the Arabian desert”, Richard Jakob, CEO of the Bystronic glass
© 2010 Messe Düsseldorf GmbH
106
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Group, commented. He went on to explain: “The hall will be handed over to the
customer for immediate occupancy - a project of this magnitude is both exceptional and fascinating.” The order also incorporates a cutting and sorting system, a fully-automated insulating glass line, handling systems along with lines
for production of laminated safety glass and tempered glass. This will be the
first installation of its kind where the system is directly connected to the furnace and insulating-glass line with an expansion option for the sorting system
to include other processes. Until now, the Wajhat Glass & Aluminium Factory,
which is a company of the Saudi Marble & Granite Factory Co., has concentrated
on processing marble and granite – the acquisition of the Bystronic glass systems marks their entrance into the glass industry. The decision to commission
Bystronic glass to fully equip the hall was made by the Saudi Arabian company
on the basis of the quality on offer: Machines from the Bystronic glass Technology Center Bystronic Lenhardt GmbH had already left a very positive impression
in the past on Fahad Al-Harbi’s advisors.
07/05/2010
Top Secret Innovations at the Bystronic glass Stand:
Innovative and flying high at glasstec 2010
The Bystronic glass Group will be presenting numerous innovations at the glasstec trade fair that is taking place in Düsseldorf from 28 September to 1 October 2010. Richard Jakob, CEO of the Bystronic glass
Group revealed: “In addition to numerous new and
more sophisticated machines, we will also be presenting our customers with some exclusive innovations in our TOP SECRET area“.
This closed area will only be accessible to invited or registered guests when
accompanied by the Bystronic glass sales staff.
On its stand which covers an area of 1,200 square metres, Bystronic glass will
be presenting system solutions for glass processing in the areas of building and
automotive glass, not forgetting the solar industry. Moderated live machine presentations will enable visitors to gain an insight into the fascinating technologies.
A small oasis of tranquillity will be situated in the centre of the stand in the ecolounge; here interested visitors can learn about the Bystronic glass commitment
motto “Living for the Future“ and also relax a little.
“We want to fly high this year – and this is never more true than for glasstec“,
explained Richard Jakob. Thanks to the two-storey construction, the visitors in
the upper catering area will have a good view of the entire stand as well as the
areas of Bystronic glass expertise: 1. Glass cutting The focus will be on the
efficient sorting concept, first’sort and speed’lamicut, the newly developed cutting plant for laminated glass which includes numerous remarkable functions. 2.
© 2010 Messe Düsseldorf GmbH
107
Laminated glass manufacturing Bystronic glass will be presenting the horizontal
washer, a new horizontal glass washing machine which has been especially designed for laminated glass but has the flexibility to be used in other production
areas. 3. Insulating glass manufacturing Decades of experience and numerous
pioneering developments make Bystronic glass a highly qualified warm edge
expert. As the only provider, the corporate group can offer its customers automated solutions for all of the standard warm edge spacers. Visitors will for example be able to see applications of the trendsetting TPS® technology as well as
the Super Spacer® on stand. 4. Handling equipment Bystronic glass traditionally offers a large range of efficient handling equipment for flat glass and plate
processing. Visitors can try out numerous lifts and suction frames on the stand
themselves. 5. Solar technology No matter whether pre-processing, front-end
or back-end: Bystronic glass has the right solar technology solution! With the
photovoltaic TPA it is possible to effectively protect PV thin film modules from
moisture prior to the laminating process. Furthermore, the film trimmer enables
an automatic trimming of projections to be carried out prior to lamination. 6.
Automotive glass pre-processing Bystronic launched a completely new generation of machines for the pre-processing of automotive glass, the champ’speed
line, in spring 2010. A video presentation provides an insight into the machine
technology from various views. 7. Window manufacturing With a multimedia
presentation, Bystronic glass will be presenting the latest developments and efficient solutions in its latest core competence window manufacturing. 8. Service
& Support For Bystronic glass, customer proximity and a worldwide after-sales
support are inseparably connected to each other. At glasstec 2010, Bystronic
glass will be devoting itself to this important subject with its own competence
corner. Here, those who are interested can find out more about the subjects
hotline, spare parts catalogue, service agreements and training courses.
06/14/2010
Relaunch: 2nd generation Bystronic glass
compact’sealer
KÖWA Isolierglas GmbH in Wackersdorf, Germany, has been
working with the first Bystronic glass second generation compact’sealer since the beginning of 2010. “We were won over by
both the machine’s capabilities as well as the fast, expert service provided by Bystronic glass,” explained KÖWA’s Managing
Director, Klaus Köhler.
The compact’sealer was originally designed as a start-up solution for automatic sealing of insulating glass units. As it has
been in the industry for almost 40 years “start-up” is hardly the word to use to
describe KÖWA, a member of the Uniglas group, and manufacturer of insulating glass. When they made contact with Bystronic glass they had already been
© 2010 Messe Düsseldorf GmbH
108
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
producing the product on two insulating glass lines for many years; the larger
of these lines was modernised only last year and equipped with the latest machines from Bystronic glass. The smaller of the two lines then needed a new
sealing robot, which had to fit exactly into the available space. So the company,
based in Eastern Bavaria, decided on the compact version of the sealing robot,
among other things, because of the machine depth. “Bystronic glass was able
to produce good references and ultimately convinced us not only about the machine’s technology, but also in respect of the personal advice given to us by their
expert sales team,” recalled Klaus Köhler.
compact’sealer with new technical details Besides the compact’sealer’s proven
functions including a volume-controlled and easily accessible dosing system, nocontact conveyor through an air cushion rear wall, and a quick-release closure
system for rapid nozzle changing, the latest version of the machine has a few
extra technical details. By using a metal spatula which was already in use on
its “big brother” – the “sealer” sealing robot, which locks the corners during the
injection process, it is possible to achieve a much better quality at the corners.
Furthermore, an additional feeler ensures even more accurate calculation of the
required quantity of sealing material - even when the space between lites is
uneven it is impossible to dispense too much, with resultant spillage. A special
coating on the mixer prevents the sealing material from sticking and extends the
intervals between cleaning. By implementing high-performance materials with
outstanding surface qualities, the dosing unit’s service life is also extended.
Compact and simply fast The staff at KÖWA are extremely pleased with the way
the new compact’sealer operates. “It’s a completely new generation of machine,
that has made our work much easier,” reported Peter Tauber, who, with Cornelia
Krempl, is joint Production Manager at KÖWA. He added: “The machine is controlled on a 3D interface with sliders, so it’s easy to operate and very accurate
even while wearing gloves. Just one person can quickly change the material
drums, and the nozzles are flushed by simply actuating the operator knob while
in automatic mode.” The dosing pistons on the two materials components are
synchronised during the mixing process. This means that in automatic operation it is possible to utilise the maximum amount of material available, therefore
avoiding machine stoppages.
“On our smaller line we seal insulating glass units in very many standard sizes,”
continued Klaus Köhler, who last year saw a distinct increase in demand for triple
insulating glass units – from a 10 percent share in 2008 to 2 percent in 2009. To
meet this demand the sealing robot needed to be able to provide a high quality
seal quickly and evenly, even on triple units. “With the compact’sealer we have
acquired a machine that perfectly meets all our requirements,” explained Production Manager Peter Tauber. In addition to the compact sealing robot, KÖWA
has also been operating on the Bystronic glass insulating glass line mentioned
© 2010 Messe Düsseldorf GmbH
109
at the beginning of this article since last year, with the company producing units
up to 4.00 metres in length.
05/06/2010
Ergonomic glass handling: Lightweight top crane
systems – for easy handling
”Handling equipment is only popular if it is easy to use,” states
Stefan Herrmann, Branch Manager at Semcoglas in Nordhorn,
commenting directly about a reason to provide the entire production hall with handling systems from the Bystronic glass group.
The entire hall at Nordhorn in Lower Saxony, which was commissioned in spring 2008, has a framework of lightweight top
crane systems and lifts from the Bystronic glass Technology
Center Bystronic Armatec. ”At that time, the company asked
for a fast and secure glass handling system, which could even be used by inexperienced operators,” explains Dietmar Weichsel, who is selling Bystronic glass
handling equipment in northern Germany. For this reason, he suggested a combination of equipment for moving light and heavy glass plates at a single work
station. With this system, he met exactly the needs of the customer, for whom
the safety of his employees is of paramount importance.
User-friendly equipment ”We want colleagues to move even the lightest of loads
with handling equipment and this can be achieved only if the equipment is easy
to use”, reports Stefan Herrmann from his experience. The Branch Manger especially appreciates the Easy-Lift from Bystronic glass: ”Its thick hoisting tube,
which compresses the air, allows extremely accurate operation,” he explains and
demonstrates this fact on the glass loader of the production line for laminated
safety glass. In general, the handling equipment of the Easy-Lift type is characterised by its rigid connection between the suction frame and the crane track,
facilitating exact positioning of the glass lites. At the same time, the aluminium
construction keeps the weight of the equipment itself to a minimum.
An overview of the product range However, Semcoglas is not only working with
the Easy-Lift from Bystronic glass. During the planning of the approximately
15,000 m2 production facility in Nordhorn, the Swiss-German supplier of system solutions for the manufacture of architectural and automotive glass was involved from the very beginning. This provides visitors to the Nordhorn-based
Semcoglas factory with a good overview of Bystronic glass’ handling systems
product range: Single and two-column lifts, manipulators and suction frames,
each running on lightweight top crane systems – almost all variants are available. ”Thanks to the excellent advisory service, the selection of products and
equipment for the entire hall this installation was extremely simple,” Stefan Herrmann reports during the guided tour through the hall.
© 2010 Messe Düsseldorf GmbH
110
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
The excellent business relationship goes back more than ten years: At that
time, Semcoglas purchased a number of companies in which handling equipment from the Technology Center Bystronic Armatec was already in use. Today,
the company is active in 24 locations at home and abroad – from glass cutting
via screen printing to the production of insulating and laminated safety glass,
the group is serving the entire value chain of glass. In doing so, machines of
the Bystronic glass group are being used in almost every location. ”In Nordhorn alone, we installed around 40 handling systems and suitable lightweight
top crane systems,” Dietmar Weichsel reports. In addition, there are lines for
insulating and laminated safety glass production.
Advantageous handling The reasons for the continuation of the business relationship are obvious: “The products are convincing and save space especially
the handling systems and can be used according to individual requirements because of their modular design,” explains Stefan Herrmann. And last but not
least, this also includes the excellent service, as he points out. ”A relationship of
trust is important to us. We greatly appreciate that a brief phone call will suffice
for a member of the service staff to address the issue shortly afterwards. It is
important to have a contact partner who has the technical expertise and is 100
% reliable at the same time.”
05/06/2010
To ensure that the new spare parts catalogue is practice-oriented and userfriendly, Bystronic Lenhardt GmbH actively involved several customers in the
development process: this enabled them to test the improved service throughout autumn 2009 for the first time, after which they offered their opinion. At the
same time consideration was given to the fact that over the past few years users’
habits have also changed in relation to internet browsers used: the new catalogue display and the online ordering process function fully independently of the
actual internet browser used.
Product Overview
Customer Service 2.0 at Bystronic Lenhardt
In line with all new plants, the Bystronic Lenhardt
GmbH which is part of Bystronic glass Group, has
now launched an optimised, spare-parts catalogue tailored specifically for customer machines. “In CD-ROM
format this enables customers to easily identify the
required parts and order them directly online. This
speeds up the entire delivery process while helping to prevent any wrong orders”,
Harry Auer, Head of Customer Service summed up regarding the improvement.
The manufacturer of machines and plants for insulating glass production has
provided a spare parts catalogue on CD-ROM for eight years now. “The parts
catalogue is recognised by customers as an extremely useful tool having become firmly established with our customers,” Harry Auer was pleased to report.
However, there were various reasons for a modernisation: thanks to an improved search feature, which not only sorts keywords and machine structure,
but which can also search various categories. The user can now find the appropriate machine part far more easily. Now, for example, wear parts such as
seals or rollers can be collected into a group, while durable machine parts such
as motors or bearings are located in their own specific category.
© 2010 Messe Düsseldorf GmbH
Intuitive Operation Each individual spare part is accompanied by a photo which
immediately appears to the customer in the overview. “This not only makes it
easier to identify the correct part, it is also in line with the current standards familiar to users in online shops”, explained the Head of Bystronic Lenhardt Service.
In view of this the visual display and navigation also underwent a complete redesign. Customers can place the required parts into the shopping cart at the
click of a mouse and then confirm the order straight away online. The customer
is then immediately sent an order confirmation email. Alternatively, customers
can also request an offer to match their requirements before actually making an
order.
111
Bystronic Maschinen AG
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.03
Conveying, sorting and storage facilities
glasstec.01.13.05
Warehouse technology
glasstec.02.01.01.01
Cutting technology for float glass
glasstec.02.01.01.02
Cutting technology for laminated safety glass
glasstec.02.01.03
Devices for coating removal
© 2010 Messe Düsseldorf GmbH
112
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.02.01.04.01
Mechanical snapping devices
glasstec.02.01.04.02
Thermal snapping devices
glasstec.02.02
Drilling technology
glasstec.02.03.01.01
Grinding techniques for straight edges
glasstec.02.03.01.02
Grinding techniques for patterned glass
glasstec.02.03.01.03
Grinding techniques for formed glass
glasstec.02.05.01
Laser-isolating technology
glasstec.02.05.03
Laser-removing technology
glasstec.03.03
Automotive glass
Product Overview
glasstec.03.04.01.02
PV system components
glasstec.01.09.06
Product Details
glasstec.01.13.05
C.RE.F.IN. S.r.l.
Bystronic Maschinen AG
Address
Via E. De Filippo, 29
30038 Spinea (Venezia)
Italy
Phone
+39 041 991246
Fax
+39 041 5410716
Internet address
www.crefin.it
E-Mail
info@crefin.it
Stand
Hall 13, A69 (Page 540)
Fusing Kiln
Product Details
glasstec.01.09.06
Warehouse technology
C.RE.F.IN. S.r.l.
C.RE.F.IN. S.r.l.
Fusing Kiln
Worldwide unique feeding systems
Heating services
storer - Automatic left-over sheet storage for horizontal
cutting lines - Increased left-over sheet capacity - Less
personnel deployment - Integration into existing cutting
lines
MAINTENANCE and DRYING SERVICES
Either on its own or in co-operation with partners of proven experience, C.RE.F.IN
S.r.l. is in a position to deliver a full range of refractory retrofit services (overcoating, lining etc.).
In addition, working with our skilled staff and with our equipment, we carry out
different refractory drying and/or pre-heating services.
© 2010 Messe Düsseldorf GmbH
113
© 2010 Messe Düsseldorf GmbH
114
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
CAR-MET S.p.A.
glasstec.01.09.01
Address
Via Cavour, 9
31010 Cimetta / TV
Italy
CAR-MET S.p.A.
Transport systems
SCRAPERS
with WEAR-PROOF STEEL BOTTOM
(WITHOUT THE USE OF BASALT)
Phone
+39 0438 794784
Fax
+39 0438 795320
Internet address
www.carmetspa.it
Provided with special blades, activated by a high resistance concrete chain, built
exclusively from our own design.
Complete of rotation control device, torque limiting device and emergency stop.
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
Annealing lehrs
E-Mail
info@carmetspa.it
Stand
Hall 13, E05 (Page 540)
Product Overview
Annealing lehrs fed by gas, electricity or liquid fuels, where the exchange may
be direct, indirect or mixed.
Our plants are suited for work with the most precious of crystals and with the
most exaggerated bottles, spanning through all types of table glassware.
CAR-MET S.p.A.
glasstec.01.09.01
Transport systems
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
We satisfy the needs of modern glass companies putting our experience and
technology at their service.
With a belt ranging in width from 60 cm to over 5 m, we can satisfy all kinds of
production needs.
glasstec.01.09.04
Decorating lehrs
glasstec.01.09.04
Decorating lehrs
Decoration requires
glasstec.01.09.05
Pre-heating furnaces
The delicate world of decoration requires particular care of each detail, nothing
is left to chance, everything is carefully planned and researched to reach the
best results.
glasstec.01.10.06
Stacking machines
glasstec.01.12.01
Hot end coating
glasstec.01.12.02
Cold end coating
We have been offering our service for the decoration of hollow glass since the
dawn of this market, we have grown with our decorating clients and we continue
to develop both together as well as individually, new tactics to face the modern
needs of new applications.
UNIFORM TEMPERATURE
EXCELLENT DECORATION
REDUCED EXPENDITURES.
© 2010 Messe Düsseldorf GmbH
115
© 2010 Messe Düsseldorf GmbH
116
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.09.05
Pre-heating furnaces
Carborundum Universal Limited
BELT LENGTH: 3800 mm.
Address
No: 105, Sreeza Terrace, Gandhi Nagar,
600020 Adyar, Chennai
India
Heating recovery in differentiated counter-current
Phone
+91 44 42187813
Internal dimensions: cm 110x130xh 50.
Fax
+91 44 42187816
Special heating lehrs for the glass operating-machines
blow-moulds.
Internet address
www.cumiceramics.com
- Heating gas.
E-Mail
thandeswaran@cumi.murugappa.com
- The trolley just store and retreat the moulds, so they
can’t be heated by the lehr.
Stand
Hall 13, D85 (Page 540)
Heating recovery in differentiated counter-current
BELT LENGTH: 3800 mm.
- Electronic temperature control.
Internal dimensions: cm 110x130xh 50.
Special heating lehrs for the glass operating-machines
blow-moulds.
Product Overview
- Electronic temperature control.
glasstec.01.02.01
- Heating gas.
Refractory materials
Product Details
- The trolley just store and retreat the moulds, so they
can’t be heated by the lehr.
glasstec.01.10.06
Carborundum Universal Limited
glasstec.01.02.01
Carborundum Universal Limited
Refractory materials
Ceramic Industry
Stacking machines
_ 3 AXES SERVO DRIVEN
CUMI Provides total refractory solutions to Ceramic industries, namely Insulators, Sanitaryware, Tableware, Ceramic Tiles, and Abrasives. Our refractories
are used in Kiln Lining, Klin Car and as Kiln Furniture – posts, tiles, beams,
setters etc. Our products are being used in kilns designed by leading OEMs.
with water or air cooled bar, and on request,
CUMI offers high purity Super Refractories for non glass con
with counter-bar.
Regenerator
STACKERS
2 AXES MECHANINCAL DRIVEN
Melter
Distributor and Forehearth
Feeder Expendable
© 2010 Messe Düsseldorf GmbH
117
© 2010 Messe Düsseldorf GmbH
118
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Cestaro srl
Changshu Jianhua Die Sets Co., Ltd.
Address
Via Carlo Leone
10098 Rivoli
Italy
Address
Shajiabang Town
215559 Changshu City
China (Rep.)
Phone
+39 011 9058816
Phone
+86 512 52501847
Fax
+39 011 9070333
Fax
+86 512 52500838
Internet address
www.cestaro.ce.it
Internet address
www.jhmould.com
E-Mail
info@cestaro.ce.it
E-Mail
mjhmg@163.net
Stand
Hall 15, F51 (Page 552)
Stand
Hall 10, B04-2 (Page 534)
Product Overview
glasstec.01.06.15
Cestaro srl
Metering machine
Product Details
glasstec.01.06.15
Product Overview
glasstec.01.06.13
Cestaro srl
Metering machine
Changshu Jianhua Die Sets Co., Ltd.
Moulds for glass production
Product Details
glasstec.01.06.13
Changshu Jianhua Die Sets Co., Ltd.
Moulds for glass production
Blank mould of drink bottle
POLIMAT/MC
name: M—1230 material: JH—4
Features and performances
POLIMAT/MC is an innovative proportional dosing system, completely operated through computer, able to make solutions-emulsions
at a rigorously constant concentration. The computer controls each
operation and signals every possible anomaly.
Blank mould of drink bottle
POLIMAT/MC is, at present, the most interesting proposal to
feed spraying systems for superficial treatment of glass containers
(cold-end).
name: M—1230 material: JH—4
Thanks to its features, POLIMAT/MC is also suitable to dose and feed products
used in shears lubrification (cutting-gob).
© 2010 Messe Düsseldorf GmbH
119
© 2010 Messe Düsseldorf GmbH
120
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Mould for cup
Product Details
name: CP-312 material: SUS431
glasstec.01.06.13
Changshu Jinggong Mould Mfg. Co., Ltd.
Moulds for glass production
Series of mould bererage bottle
Mould for cup
name: CP-312 material: SUS431
Series of mould bererage bottle
Changshu Jinggong Mould Mfg. Co., Ltd.
Address
East of Shajiabang
215559 Changshu, Jiangsu
China (Rep.)
Phone
+86 512 52506563
Fax
+86 512 52507121
Three-part glass bowl mould
Three-part glass bowl mould
Internet address
E-Mail
honest_zhao@163.net
Stand
Hall 13, E86 (Page 540)
Product Overview
glasstec.01.06.13
Changshu Jinggong Mould Mfg. Co., Ltd.
Moulds for glass production
© 2010 Messe Düsseldorf GmbH
121
© 2010 Messe Düsseldorf GmbH
122
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Changshu Shinan Mould Co., Ltd
Changshu Weiheng Mould Manufacture Co., Ltd.
Address
Shuinan Village, Shajiabang Town
215559 Changshu City, Jiangsu Prov.
China (Rep.)
Address
Kuncheng Village Yushan Town
215558 Changshu, Jiangsu
China (Rep.)
Phone
+86 512 52501197
Phone
+86 512 52838115
Fax
+86 512 52503232
Fax
+86 512 52838168
Internet address
www.snmould.com
Internet address
www.weiheng.cn
E-Mail
export@snmould.com
E-Mail
huangkaty@163.com
Stand
Hall 10, C20-4 (Page 534)
Stand
Hall 10, B80-19 (Page 534)
Product Overview
glasstec.01.06.13
Changshu Shinan Mould Co., Ltd
Moulds for glass production
Product Details
glasstec.01.06.13
Product Overview
glasstec.01.06.13
Changshu Shinan Mould Co., Ltd
Moulds for glass production
Changshu Weiheng Mould Manufacture Co., Ltd.
Moulds for glass production
Product Details
glasstec.01.06.13
Moulds
Mould
Foodstuff bottles
Mold for Food Jar
Changshu Weiheng Mould Manufacture Co., Ltd.
Moulds for glass production
Drink bottles
Wine bottles
Cosmetic bottles
Medicine
Lamp, Vessel
Mould
Glass
© 2010 Messe Düsseldorf GmbH
Mold for Beverage Bottle
123
© 2010 Messe Düsseldorf GmbH
124
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
ErgoLevel Glass Lifter
Cimec Oy
Address
NTe Glass Lifter - pneumatically powered glass lifter
equipped with two-speed lifting and tilting
Lastikankatu 3
33730 Tampere
Finland
Phone
+358-3-213-1575
Fax
+358-3-213-1577
Internet address
www.cimec.fi
E-Mail
sales@cimec.fi
Stand
Hall 13, A13 (Page 540)
Equipped with ErgoLevel Control arm ==> permanent
height of the control panel and handles Extremely suitable for continuous work.
Ergonomic Glass Lifters
Product Overview
glasstec.01.13.01
NT Glass Lifter - pneumatically powered glass lifter
equipped with two-speed lifting and tilting - endless rotation around suspension - endless rotation of the gripper
Cimec Oy
NTT Glass Lifter - pneumatically powered telescopic
glass lifter equipped with two-speed lifting and tilting endless rotation of the gripper - endless rotation around
suspension - extremely suitable for lifting jobs in low room that cannot be performed by traditional lifters
Feeding and stacking systems
Product Details
Cimec Oy
NV Glass Lifter - pneumatically powered glass lifter equipped with two-speed
lifting - endless rotation around suspension - endless rotation of the gripper
Lifting capacities 150 - 400 kg
glasstec.01.13.01
Feeding and stacking systems
The Cimec ergonomic Glass Lifter allows you to work with one man only without
risking the user’s health even when lifting very big glass sheets.
ErgoLevel Glass Lifter
NTe Glass Lifter - pneumatically powered glass lifter
equipped with two-speed lifting and tilting
By means of Cimec multi-function Control Arm you can utilize the entire loading
area from one side only thus avoiding the additional turnings of the glass.
Equipped with ErgoLevel Control arm ==> permanent
height of the control panel and handles Extremely suitable for continuous work.
Ergonomic Glass Lifters
NT Glass Lifter - pneumatically powered glass lifter
equipped with two-speed lifting and tilting - endless rotation around suspension - endless rotation of the gripper
NTT Glass Lifter - pneumatically powered telescopic
glass lifter equipped with two-speed lifting and tilting endless rotation of the gripper - endless rotation around
© 2010 Messe Düsseldorf GmbH
125
© 2010 Messe Düsseldorf GmbH
126
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
suspension - extremely suitable for lifting jobs in low room that cannot be performed by traditional lifters
oped together with our customers to fulfill their requirements.
NV Glass Lifter - pneumatically powered glass lifter equipped with two-speed
lifting - endless rotation around suspension - endless rotation of the gripper
CNUD-EFCO INTERNATIONAL SA/NV
Lifting capacities 150 - 400 kg
Address
Boulevard de l Humanite, 116 / 3
1070 Brussels
Belgium
Phone
+32 2 5290200
Fax
+32 2 5234336
NVer Glass Lifter - pneumatically powered glass lifter
equipped with two-speed lifting. - pneumatically operating Edge Support - NO SLIDING - up to 400 kg - one
person operation
Internet address
www.cnud.com
E-Mail
info@cnud.com
The new lifter is equipped with pneumatically operating
supports which will prevent sliding of the glass sheets
while lifting IG-units from a production line. Handling
of the “fresh” IG-unit has always been difficult and dangerous operation and due to growing glass sizes and thicknesses it has become
even more difficult. This problem can be solved now by this New IG-lifter which
suites for different types of production lines. The lifting device has been developed together with our customers to fulfill their requirements.
Stand
Hall 13, A48 (Page 540)
The Cimec ergonomic Glass Lifter allows you to work with one man only without
risking the user’s health even when lifting very big glass sheets.
By means of Cimec multi-function Control Arm you can utilize the entire loading
area from one side only thus avoiding the additional turnings of the glass.
Glass Lifter for Heavy IG-units
Glass Lifter for Heavy IG-units
NVer Glass Lifter - pneumatically powered glass lifter
equipped with two-speed lifting. - pneumatically operating Edge Support - NO SLIDING - up to 400 kg - one
person operation
The new lifter is equipped with pneumatically operating
supports which will prevent sliding of the glass sheets
while lifting IG-units from a production line. Handling
of the “fresh” IG-unit has always been difficult and dangerous operation and due to growing glass sizes and thicknesses it has become
even more difficult. This problem can be solved now by this New IG-lifter which
suites for different types of production lines. The lifting device has been devel-
© 2010 Messe Düsseldorf GmbH
127
Product Overview
CNUD-EFCO INTERNATIONAL SA/NV
glasstec.01.04.08
Electrically heated systems
glasstec.01.04.10
NOx control technology
glasstec.01.05.01
Float glass technique
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
glasstec.06
Contracting, consulting, engineering, services
© 2010 Messe Düsseldorf GmbH
128
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
CNUD-EFCO INTERNATIONAL SA/NV
Product Overview
glasstec.01.05.01
CO.MI.T S.r.l.
Float glass technique
glasstec.01.06.13
Moulds for glass production
Float glass annealing lehr
Know-How 43 years expertise in flat glass annealing
Own scientific computer and CAD network Process optimizing Lehr personalizing (adapted to each customer’s specifications)
Product Details
Main Characteristics Production capacity - float glass: from 25 to 900 metric
tons a day - figured and wired glass: from 30 to 200 metric tons a day Width
range: - float glass: from 2600 to 5700 mm (ribbon width) - figured and wired
glass: from 1700 to 3200 mm (ribbon width) Thickness range: - float glass: from
0.55 to 24 mm All-metal modular design Low power consumption Fully automatic
process control - digital controllers, microprocessors or computer to control the
temperature - proportional control of heating and cooling Great flexibility of operation Electrical heaters Cooling - indirect heat exchangers, with possibility to
recover heat - direct convection on glass with temperature-controlled hot air direct convection on glass with air at ambient temperature
Moulds for hollow glass industry
glasstec.01.06.13
- Blanks, bottom plates and baffles for Verti Flow and Vacuum processes.
Commersald Impianti S.r.l.
Address
Via Labriola, 39
41100 Modena
Italy
Phone
+39 059 822374
Fax
+39 059 333099
Via Consortile Z.I.
81032 Carinaro
Italy
Internet address
www.commersald.com
E-Mail
impianti@commersald.com
+39 081 5047224
Stand
Hall 13, A05 (Page 540)
CO.MI.T S.r.l.
Phone
Moulds for glass production
- Cast iron and Bronze welded blow moulds;
Options NEW ! : CNUD driving mechanism for lehr and lift-out rollers Drive speed
control Power board for heating and cooling Temperature control board Rollers
Address
CO.MI.T S.r.l.
Fax
Product Overview
Internet address
www.comit-srl.it
E-Mail
info@comit-srl.it
Stand
Hall 13, D33 (Page 540)
© 2010 Messe Düsseldorf GmbH
glasstec.01.06.13
129
Commersald Impianti S.r.l.
Moulds for glass production
© 2010 Messe Düsseldorf GmbH
130
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Commersald Impianti S.r.l.
Product Overview
glasstec.01.06.13
Condat
Moulds for glass production
Glass Moulds
glasstec.01.02.03
Lubricators and coolants
glasstec.02.11.08.02
Chemical grinding and polishing materials
glasstec.02.11.08.03
Chemical coolants
glasstec.02.12.05
Waste water treatment
Product Details
glasstec.01.02.03
Condat
Condat
Lubricators and coolants
Lubricants : Glass industry
Address
104, Avenue Frederic Mistral
38670 Chasse-sur-Rhone
France
Phone
+33 4 78073838
CONDAT’s know-how in the formulation of technical lubricants and its experience in the field of high temperatures has enabled it to develop product ranges
for the hollow and flat glass industries, with innovative products that satisfy the
most recent manufacturing and environmental requirements (stability, biodegradability, recycling...).
HOLLOW GLASS INDUSTRY LUBRICANTS :
Fax
+33 4 78073800
Internet address
www.condat-lubricants.com
E-Mail
info@condat.fr
- Shear Spray lubricants and oils
- Oils and lubricants for Delivery
- Dry Coating for delivery system
- Graphited lac for mould lubrication
- Swabbing mould compound
Stand
Hall 13, F38 (Page 540)
- Conveyor oil
- Chains lubricant
- High temperature grease
- Assembly and maintenance lubricants
- High temperature greases
FLAT GLASS INDUSTRY LUBRICANTS:
- Oil for cutting in float process, float lubricant
- Vanishing lubricant for automatic table
© 2010 Messe Düsseldorf GmbH
131
© 2010 Messe Düsseldorf GmbH
132
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
- Edge grinding coolant
CONTEX GmbH, HM-Verschleißtechnik
- Floculant for water treatment
Address
Krefelder Str. 676
41066 Mönchengladbach
Germany
Phone
+49 2161 92790-0
Fax
+49 2161 92790-98
- Coolants for optic industry
Internet address
www.contex-gmbh.de
Special lubricants for flat glass and hollow glass industry
E-Mail
vertrieb@contex-gmbh.de
CONDAT is designer, developer and manufacturer of
technical lubricants for more than 150 years with worldwide presence. We offer a complete range of products
and equipment meeting requirements of the hollow and
flat glass processes.
Stand
Hall 15, B14 (Page 552)
For the hollow glass: Shear spray lubricants, neat oils for delivery systems, dualcomponent product for the dry “delivery” coating, graphited varnish for mould
lubrication, lubricants for SWABBING, oils for conveyor belt chains
glasstec.01.03.04
Mixing technology
glasstec.02.11.02
Replacement and spare parts
- Ink Marking
- Edge lubricant
- Coagulant
- Liquid wast treatment
- A range of maintenance products
Others : - Optic lubricants
Product Overview
For the flat glass: Neat oils for cutting, a complete range for edge grinding,
solutions for water treatment problems.
CONDAT also offers a complete range of maintenance products: oils and
greases.
Beyond furnishing lubricants, CONDAT makes a commitment to develop a partnership with its customers and offers them a complete service (analysis of products and water, environmental advice, assistance concerning regulatory information,…) and suitable equipments (dosing units, oil separator,…).
CONTEX GmbH, HM-Verschleißtechnik
Product Details
glasstec.01.03.04
CONTEX GmbH, HM-Verschleißtechnik
Mixing technology
Spare parts and individual plant design for the mineral proc
1.Tungsten Carbide tipped mixing tools -mixing shovels, whirbler tools, wall- and
bottom scrapers for all kinds of mixers 2.Mixing tools from chilled cast iron and
mixing arms -mixing arms for all kinds of mixing plants
CONDAT main goal is to develop products that respect the environment and that
follow the latest European regulations (REACH, Biocides).
© 2010 Messe Düsseldorf GmbH
133
© 2010 Messe Düsseldorf GmbH
134
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Control & Heating Systems, Dipl.-Ing. Rainer Pilz
Product Overview
Control & Heating Systems, Dipl.-Ing. Rainer...
Dipl.-Ing. Rainer Pilz
34587 Felsberg
Germany
glasstec.01.04.02
Forehearth technology
glasstec.01.04.03
Smelting technology for tank furnaces
Phone
+49 5662 9472 0
glasstec.01.04.04
Smelting technology for pot furnaces
Fax
+49 5662 9472 22
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
Internet address
www.ch-systems.de
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
E-Mail
info@ch-systems.de
Stand
Hall 14, B05 (Page 548)
Address
Product Details
glasstec.01.04.04
Control & Heating Systems, Dipl.-Ing. Rainer...
Smelting technology for pot furnaces
Feuerungsautomaten
Company News
08/09/2010
Control & Heating Systems, Dipl.-Ing. Rainer...
Specific solutions
In order to meet the needs of our customers, we have developed various specific solutions in the field of installation engineering and fuel technology.
- components with IP (International Protection Rating) code 65 - accessories for
various compenents - prefabricated mounting panels and gas mixture systems
- complete switch cabinet units - failure analysis and recording of system data
Die Feuerungsautomaten (Hersteller: Siemens Building Technologies GmbH vormals Landis & Gyr bzw.
Landis & Staefa) prüfen bei jedem Brennerstart die Funktionstüchtigkeit des
Flammenüberwachungssystems. Ferner prüft der Feuerungsautomat während
der Vorlüftzeit und teilweise auch während der Brennerstillstandszeit, ob so
genanntes Fremdlicht vorhanden ist oder ob irgendwelche sonstigen Defekte
eine Flamme vortäuschen, obwohl gar keine vorhanden ist. Fremdlicht oder
Flammenvortäuschung muss also aus Sicherheitsgründen zu Störabschaltungen oder zu Startverhinderung führen. Der Fremdlichttest wird von den Sicherheitsbestimmungen gefordert.
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
burner
Control & Heating Systems has develop a modulating burner which has proved
to use up to 40% less energy in existing installations of renowned glass factories
and glass manufacturers (hollow glass and tableware). The modulating burner
has a wide performance range ranging from approx. 4 kW to 150 kW and can
be used for a wide range of temperatures (approx. 100°C - 1200°C).
Einstufige Brenner
Einstufige Brenner
© 2010 Messe Düsseldorf GmbH
135
© 2010 Messe Düsseldorf GmbH
136
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Die zur Verfügung stehenden Brenner der Dreizler GmbH wurden
Cugher Glass S.r.l.
speziell für den Einsatz im Bereich Glas und Keramik abgestimmt und mit hochwertigen Werkstoffen ausgerüstet, so dass sie den schwierigen und teilweise
widrigen Einsatzbedingungen an Kühlbahnen, Kühlöfen, Auftreibtrommeln und
Studioöfen gerecht werden.
Unsere Brenner sind leicht zu installieren, zu bedienen und extrem
wartungsarm. Der spezielle Düsenaufbau gewährleistet einen stabilen und superleisen Betrieb, weshalb sie auch für den Einsatz in Schauhütten geeignet
sind.
Eigenschaften
Address
Via Fano,1
20161 Milano
Italy
Phone
+39 02 6620-7762
Fax
+39 02 6620-2917
Internet address
www.cugherglass.com
E-Mail
info@cugherglass.com
Stand
Hall 12, E32 (Page 538)
- unterschiedliche Leistungen
- umweltfreundlich
- kompakt
- wartungsarm
- geräuscharm
- servicefreundlich
Product Overview
- vielfältiges Zubehör
Cugher Glass S.r.l.
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.02.06.02
Enamel glass machines, screen printers, thermal
pressure equipment
glasstec.02.06.05
Dryers and decorating technology
- Standard- oder Spezialflammrohr
- mit Standardstecker, Klemmleiste
oder Industriestecker
Product Details
glasstec.01.13.02
Cugher Glass S.r.l.
Transport and handling systems
Handling
Systems for in line handling, inspection, load and unload
Handling
Systems for in line handling, inspection, load and unload
© 2010 Messe Düsseldorf GmbH
137
© 2010 Messe Düsseldorf GmbH
138
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
De Raedt Industrial Fans
Address
Parc Industriel du Monceau
4130 Tilff
Belgium
Phone
+32 4 2288585
Fax
+32 4 2288584
If you need Industrial fans in your installation, we can
then help you thanks to our large range of fans. Indeed,
all our Fans are high quality equipment, which were developed following new methodology and stringent standards to offer a high quality equipment with large performances. This new approach guarantees you a very
high quality product at a attractive price within a short délivery time.
Our fans are composed of many ranges with different aeraulical characteristics.
Together these ranges have total pressures going to 5000 daPa and 100 m³/s
flow for a maximal temperature of fluid of 800°C.
Internet address
E-Mail
sales@deraedt.be
Stand
Hall 13, D65 (Page 540)
Product Overview
Moreover these fans can be delivered with a whole range of options.
Industrial Fans
De Raedt Industrial Fans
If you need Industrial fans in your installation, we can
then help you thanks to our large range of fans. Indeed,
all our Fans are high quality equipment, which were developed following new methodology and stringent standards to offer a high quality equipment with large performances. This new approach guarantees you a very
high quality product at a attractive price within a short délivery time.
glasstec.01.03.02
Drying technology
glasstec.01.03.10
Ventilation systems
glasstec.02.08.03
Production equipment for insulating glass frames
glasstec.02.11.02
Replacement and spare parts
Our fans are composed of many ranges with different aeraulical characteristics.
Together these ranges have total pressures going to 5000 daPa and 100 m³/s
flow for a maximal temperature of fluid of 800°C.
glasstec.02.11.07
Vacuum pumps
Moreover these fans can be delivered with a whole range of options.
Product Details
glasstec.01.03.10
De Raedt Industrial Fans
Ventilation systems
Industrial Fans
© 2010 Messe Düsseldorf GmbH
139
© 2010 Messe Düsseldorf GmbH
140
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Glass and Beverage
DMA Maschinen- und Anlagenbau GmbH & Co. KG
Address
DMA Maschinen- und Anlagenbau GmbH & Co. KG supplies complete lines for the ”Cold-End-Area” including PLCcontrol for the glass industry.
Eugen-Diesel-Str. 8
37671 Höxter
Germany
Phone
+49 5271 9706-0
Fax
+49 5271 9706-99
Internet address
www.dma.de
E-Mail
dma@dma.de
Stand
Hall 13, A43 (Page 540)
Product Overview
The product range includes:
- Rinser for PET and glass bottles - Bottle and jar inverter Conveyors for bottles - No-pressure separations - Conveyors for crates and cases - Vertical side grip conveyors - Slat
band chain conveyors - Complete line control systems
Dornbusch Gravuren GmbH
DMA Maschinen- und Anlagenbau GmbH & Co. KG
Address
Am Selder 31
47906 Kempen
Germany
Phone
+49 2152 9165-0
Fax
+49 2152 518394
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
E-Mail
glasstec.21.03
Special offers for architects
Stand
Product Details
glasstec.01.13.02
Internet address
DMA Maschinen- und Anlagenbau GmbH & Co. KG
Transport and handling systems
Hall 10, D34 (Page 534)
Product Overview
Dornbusch Gravuren GmbH
glasstec.01.05.03
Casting and rolling technology
glasstec.03.01.04
Cast glass, ornamental glass
glasstec.03.01.07
Wired glass
Conveying Systems
© 2010 Messe Düsseldorf GmbH
141
© 2010 Messe Düsseldorf GmbH
142
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.05.03
Dornbusch Gravuren GmbH
Casting and rolling technology
Walzanfertigung
Die Herstellung und Gravur von Präge- und Druckwalzen verschiedener Dimensionen und Einsatzbereiche erfordern ein hohes Maß an Erfahrung.
Walzanfertigung
Die Herstellung und Gravur von Präge- und Druckwalzen verschiedener Dimensionen und Einsatzbereiche erfordern ein hohes Maß an Erfahrung.
DSF Refractories & Minerals Ltd.
Address
+44 1629 636271
Fax
+44 1629 636892
Internet address
www.dsf.co.uk
E-Mail
info@dsf.co.uk
DSF will also be showcasing its Frimax spinel material which is being utilised on
oxy-fuel furnace crowns and melter superstructures. DSF Frimax 7 has a melting
point of 2135.C and has very low reactivity with soda. This unique material is
rapidly becoming a key consideration for glassmakers and furnace designers
worldwide.
Tin bath material will again be featured; our calcuim-aluminate block, DSF Calex,
is generating lots of interest from our float glass customers and we are now
manufacturing sillimanite roof tiles in our China facilty.
More information will be available about what we are offering from our factory
in Tianjin, China. We have recently supplied orders for RMT CF40 subhearth
blocks, RMT Chemcast Fused Mullite forehearth roof blocks and RMT Frimax
CHI spinel burners blocks.
Information on new developments such as DSF AZ15 and DSF AZ26 which
complete our AZS range of products, will be available at the event along with
product data on the complete range of refractory materials we supply into the
glass industry.
Friden, Newhaven
SK17 0DX Buxton, Derbyshire
United Kingdom
Phone
furnace life due to its resistance to batch carry-over.
New product brochures will be available and of course our sales and technical
teams will be on hand to offer friendly advise and recommendations. We hope
to welcome you to our stand 13B80 during Glasstec week and if you would like
to contact us for more product information or arrange a meeting please e-mail
Sarah Wells, Exhibition & Sales Co-ordinator at swells@dsf.co.uk
Product Overview
glasstec.01.02.01
Stand
DSF Refractories & Minerals Ltd.
Refractory materials
Hall 13, B80 (Page 540)
Product Details
Company News
DSF Refractories & Minerals Ltd.
glasstec.01.02.01
DSF Refractories & Minerals Ltd.
Refractory materials
DSF 59
09/23/2010
Glasstec 2010 Preview
DSF CF40
Glasstec 2010 will see DSF highlight the trend towards the use of its mullite
refractories for regenerator construction. DSF have been supplying high fired
andalusite and a range of mullite materials into the glass industry for more than
30 years with hundreds of installations worldwide. Our team at Glasstec will be
describing how the use of DSF high fired mullite can save a significant amount
of energy when compared to traditional magnesite and how mullite can extend
© 2010 Messe Düsseldorf GmbH
143
DSF Chemcast Frisil H
DSF Chemcast Fused Mullite
DSF CTB
DSF Frimax 7
© 2010 Messe Düsseldorf GmbH
144
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
DSF Frisil A1
Company News
DSF Frisil G
09/10/2010
DSF Frisil H
DSF Fused Mullite HF17
DuPont de Nemours International S.A.
Stand 13E56 — DuPont™ Vespel® Glass Handling
Technology helps improve bottle production efficiency
and sustainability efforts
Geneva, September, 2010. DuPont chose Glasstec
2010 to present its latest and innovative Vespel® Glass
Handling Technology offering glass container producers important advances in hot-glass handling components: improved glass contact part life, reduced glass
defect and lower production costs through greatly increased wear resistance, low thermal conductivity, reduced oil absorption and higher impact resistance.
Customers were shown how to reduce annual costs by replacing traditional production line components of graphite with DuPont™ Vespel® SCP-5050 parts.
In addition, Vespel® Glass Handling Technology can help the sustainability efforts of the food, beverage and glass container industry by reducing the number
of scrap bottles, thereby lowering the amount of energy and subsequently the
CO2 emissions per container. This technology can also enable manufacturers
to drive for new container designs with lower weight.
DSF Mullite ML31
DSF Porolite 135
DuPont de Nemours International S.A.
Address
Chemin du Pavillon, 2
1218 Le Grand Saconnex - Geneva
Switzerland
Phone
+41 22 717 51 11
Fax
+41 22 717 40 00
Internet address
http://www2.dupont.com/Vespel/en_US/uses_apps/e_and_mh/glass.html
E-Mail
Vanessa.Hakim@dupont.com
Stand
Hall 13, E56 (Page 540)
Step-change in cost and performance advantages “Vespel® SCP-5050 components deliver a step change in cost and performance advantages over traditional
carbon graphite components, including 50 to 100 times lower heat transfer coefficient, up to 100 percent higher impact resistance, and over three times less wear,
leading to minimal checks and micro-cracks. They can increase process reliability and lower operation costs. The proprietary materials science of DuPont
coupled with expert technical support and service represents a comprehensive
solution for hot glass handling applications,” said René Garza, Vespel® global
marketing manager, Energy and Materials Handling.
Production efficiency and cost savings calculated Vespel® Glass Handling Technology offers reliable, cost-effective solutions in hot glass resistant take-out inserts, sweep-out fingers, guides, stacker bar inserts, dead plates and other glass
bottle production components. During Glasstec, customers experienced the
cost saving possibilities of switching from take-out inserts of graphite to Vespel®
SCP-5050. One calculation for a glass container manufacturer in Germany
showed that while significantly reducing its frequency of glass defects, using
DuPont™ Vespel® parts and shapes could result in CO2 emissions reduction
of over 33 000 Kg per annum, in addition to significant savings from greater
take-out insert life (data on file).
Sustainability is key Sustainability was a key theme at Glasstec 2010, with top
© 2010 Messe Düsseldorf GmbH
145
© 2010 Messe Düsseldorf GmbH
146
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
priority being given to energy and CO2 reduction technologies. In response,
Vespel® Glass Handling Technology showed how it can help support the sustainability efforts of the food, beverage and glass container industry by reducing
the number of scrap bottles thereby reducing the amount of energy, and subsequently the CO2 emissions per container,.
***
The DuPont Performance Polymers business manufactures and sells Crastin®
PBT and Rynite® PET thermoplastic polyester resins, Delrin® acetal resins,
Hytrel® thermoplastic polyester elastomers, DuPont™ ETPV Performance thermoplastic vulcanizates, Minlon® mineral reinforced nylon resins, Neoprene polychloroprene, Tynex® filaments, Vespel® parts and shapes, Kalrez® perfluoroelastomer parts, Vamac® ethylene acrylic elastomers (AEM), Viton® fluoroelastomers, Viton® FreeFlow™ processing aids, Zytel® nylon resins and Zytel®
HTN high-performance polyamides. These products serve global markets in the
aerospace, appliance, automotive, consumer, electrical, electronic, healthcare,
industrial, sporting goods and many other diversified industries.
DuPont is a science-based products and services company. Founded in 1802,
DuPont puts science to work by creating sustainable solutions essential to a
better, safer, healthier life for people everywhere. Operating in more than 70
countries, DuPont offers a wide range of innovative products and services for
markets including agriculture and food; building and construction; communications; and transportation.
Product Overview
DuPont de Nemours International S.A.
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
glasstec.03.01.03
Blown glass
glasstec.03.04.02.03
Other solar thermal system components
glasstec.04.03
Handling tools, hand-guided
Dura Temp Corporation
Address
949 S. McCord Rd.
43528 Holland, OH
USA
Phone
+1-419-866-4648
The DuPont Oval, DuPont™, The miracles of science™ and Vespel ® are registered trademarks or trademarks of E.I. du Pont de Nemours and Company or
its affiliates.
Fax
+1-419-866-4656
PP-KV-EU-2010-19
Internet address
www.duratemp.com
Editorial contact Nicole Savioz Telephone: ++41 (0)22 717 40 42 E-mail:
nicole.savioz@dupont.com www.vespel.com
E-Mail
sales@duratemp.com
Stand
Hall 13, A24 (Page 540)
© 2010 Messe Düsseldorf GmbH
147
© 2010 Messe Düsseldorf GmbH
148
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Company News
06/09/2010
Dura Temp Corporation
Dura Temp appointed as global distributor for
Protatherm®
Product Details
glasstec.01.06.17
Dura Temp Corporation
Aids for the forming of hollow glass
Hot Glass Handling Materials
Dura Temp products include takeout inserts, mold top plates, deadplates, sweepout (pusher) assemblies and pockets, ware guides, transfer paddles, lehr bars,
lehr pockets and contact material, items for tableware handling, flat stock material as well as cut and molded parts.
Dura Temp, a leading supplier in hot ware handling solutions, is pleased to announce that it has
been appointed as the global distributor for Protatherm®
hot ware handling products in many
markets around the world. Complimenting Dura Temp’s
line of hot ware handling solutions,
Protatherm® will add gob funnels, gob deflector plates, mold top plates, takeout
inserts,
deadplates, transfer plates, and other items to the company’s current line of
products. The
At Glasstec Dura Temp will be featuring it’s line of HW series parts which were
developed to handle hot glass in exceptionally harsh environments. Please visit
our booth for a presentation of the HW series or information on any other Dura
Temp hot ware handling products.
Rollers
Float, Bending, Tempering
Protatherm® range of products and materials have been specifically designed
to aid in the forming
and handling of hot glass containers in production.
This new partnership between Dura Temp and Protatherm® offers customers
one point of contact
for all of their hot ware handling needs from gob deflectors through the lehr
loader.
E.ITEC S.A.S.
Address
ZAC du Bec, Rue Lavoisier
42500 Le Chambon-Feugerolles
France
handling materials and quick-change parts and assemblies, providing a variety
of ware handling
Phone
+33 477 3033-33
solutions for container glass, tableware, and bending and tempering.
Fax
+33 477 3033-30
Dura Temp’s range of high temperature materials and products virtually eliminate
damage to glass
Internet address
www.eitec.fr
on account of thermal stress, oil absorption, and abrasion. With a combination
of leading-edge
E-Mail
info@eitec.fr
Stand
Hall 13, D69 (Page 540)
Since 1983, Dura Temp Corporation has provided the glass industry with superior hot glass
materials technology and a systems approach that
Product Overview
glasstec.01.06.17
Dura Temp Corporation
Aids for the forming of hollow glass
© 2010 Messe Düsseldorf GmbH
149
© 2010 Messe Düsseldorf GmbH
150
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Overview
E.ITEC S.A.S.
Product Overview
E.W. Bowman, Inc.
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.01.04.08
Electrically heated systems
glasstec.01.09.04
Decorating lehrs
glasstec.06
Contracting, consulting, engineering, services
glasstec.01.09.05
Pre-heating furnaces
Product Details
glasstec.01.04.08
E.ITEC S.A.S.
Electrically heated systems
Product Details
glasstec.01.09.03
E.W. Bowman, Inc.
Annealing lehrs, continuous/intermittent operation
Itec.bar - Arc.itec
Lehr Interior
Itec.bar : Low and high voltage high current power busbar for glass industries.
Heated zones are completely lined with stainless steel, cooling zones with high
quality carbon steel. Belt frames, fans and ducts included in all heated modules
Arc.itec : Water-cooled cables
E.W. Bowman, Inc.
Eclipse, Inc.
Address
3 Richmond Street
15401 Uniontown, Pennsylvania
USA
Phone
+1 724 438-0503
Fax
+1 724 439-5880
Internet address
www.ewbowman.com
E-Mail
sales@ewbouwman.com
Stand
Hall 13, B61-1 (Page 540)
© 2010 Messe Düsseldorf GmbH
151
Address
1665 Elmwood Road
61103 Rockford, IL
USA
Phone
+1 815 877-3031
Fax
+1 815 877-3336
Internet address
www.eclipsenet.com
E-Mail
pokeefe@eclipsenet.com
Stand
Hall 13, A81 (Page 540)
© 2010 Messe Düsseldorf GmbH
152
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Overview
Eclipse, Inc.
glasstec.01.04.02
Forehearth technology
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
glasstec.01.04.09.02
Combustion technology for oxygen heating systems
glasstec.01.04.10
NOx control technology
glasstec.05.01.01.01
Measurement and control of glass position detection
port constraints and provide years of trouble-free service. The burner’s low NOx
emissions and superior flame control are accomplished through a combination of
coaxial annular and central core flow streams. Eclipse has successfully installed
the Brightfire in over 400 glass furnaces around the world as burner retrofits and
in new furnace installations.
Eirich GmbH & Co. KG, Gustav, Maschinenfabrik
Product Details
glasstec.01.04.09.01
Eclipse, Inc.
Combustion technology for oil and gas fired smelting
furnaces
Eclipse Brightfire Burner
Eclipse will showcase the Brightfire burner, an adjustable low NO air-fuel burner. Brightfire is the perfect choice for burner conversions from oil to gas firing.
It provides up to 35 percent lower NOx emissions and
superior flame control compared to other burners. In addition, the Brightfire
provides a wide turndown ratio. Its sleek design will accommodate the tightest
port constraints and provide years of trouble-free service. The burner’s low NOx
emissions and superior flame control are accomplished through a combination of
coaxial annular and central core flow streams. Eclipse has successfully installed
the Brightfire in over 400 glass furnaces around the world as burner retrofits and
in new furnace installations.
Eclipse Brightfire Burner
Eclipse will showcase the Brightfire burner, an adjustable low NO air-fuel burner. Brightfire is the perfect choice for burner conversions from oil to gas firing.
It provides up to 35 percent lower NOx emissions and
superior flame control compared to other burners. In addition, the Brightfire
provides a wide turndown ratio. Its sleek design will accommodate the tightest
© 2010 Messe Düsseldorf GmbH
153
Address
Walldürner Str. 50
74736 Hardheim
Germany
Phone
+49 6283 51-0
Fax
+49 6283 51-325
Internet address
www.eirich.com
E-Mail
eirich@eirich.de
Stand
Hall 11, B26 (Page 536)
Product Overview
Eirich GmbH & Co. KG, Gustav, Maschinenfabrik
glasstec.01.03.04
Mixing technology
glasstec.01.03.01
Crashing and grading
glasstec.01.03.05
Pelletising technology
glasstec.21.01
glass technology live
© 2010 Messe Düsseldorf GmbH
154
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.03.04
Eirich GmbH & Co. KG, Gustav, Maschinenfabrik
Mixing technology
Umweltschutz
Filterstäube, Flugaschen, Schlämme, Stäube, etc.
Ihr Produkt ist nie besser als die Mischung
Eirich ist seit mehr als 100 Jahren in der Entwicklung
der industriellen Mischtechnik tätig. Viele Patente, die
generell gute Zusammenarbeit mit den Anwendern und
die Partnerschaft mit Forschung und Lehre begründen
den guten Ruf des Eirich-Intensivmischers - weltweit.
glasstec.01.03.05
Eirich GmbH & Co. KG, Gustav, Maschinenfabrik
Address
Walldürner Str. 50
74736 Hardheim
Germany
Phone
+49 6283 51-0
Fax
+49 6283 51-325
Internet address
www.eirich.com
E-Mail
eirich@eirich.de
Stand
Hall 15, C22 (Page 552)
Pelletising technology
Eirich verfügt über ein umfassendes Know-how in
der Granulie
Keramik
Pressmassen, Molekularsiebe, Proppants, Varistorenmasse, Dentalmassen, Schneidkeramik, Schleifmittel,
Oxidkeramik, Mahlkugeln, Ferrite, etc.
Baustoffe
Porosierungsmittel für Ziegel, Blähton, Perlit, etc.
Product Overview
Glas
Glasmehl, Kohlenstoff, Bleiglasgemenge, etc.
Metallurgie
Eirich GmbH & Co. KG, Gustav, Maschinenfabrik
glasstec.01.03.01
Crashing and grading
glasstec.01.03.04
Mixing technology
glasstec.01.03.05
Pelletising technology
glasstec.21.01
glass technology live
Eisen-, Zink- und Bleierze, Aluminiumoxid, Siliciumcarbid, etc.
Agrochemie
Kalkhydrat, Dolomit, Phosphatdünger, Torfdünger, Mineralstoffe, Zuckerrübensamen, etc.
© 2010 Messe Düsseldorf GmbH
155
© 2010 Messe Düsseldorf GmbH
156
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.03.04
Eirich GmbH & Co. KG, Gustav, Maschinenfabrik
Mixing technology
Umweltschutz
Filterstäube, Flugaschen, Schlämme, Stäube, etc.
Ihr Produkt ist nie besser als die Mischung
Eirich ist seit mehr als 100 Jahren in der Entwicklung
der industriellen Mischtechnik tätig. Viele Patente, die
generell gute Zusammenarbeit mit den Anwendern und
die Partnerschaft mit Forschung und Lehre begründen
den guten Ruf des Eirich-Intensivmischers - weltweit.
Electroglass Ltd.
Address
4 Brunel Road
SS7 4PS Benfleet, Essex
United Kingdom
Phone
+44 1268 565577
Eirich verfügt über ein umfassendes Know-how in
der Granulie
Fax
+44 1268 565594
Keramik
Internet address
www.electroglass.co.uk
Pressmassen, Molekularsiebe, Proppants, Varistorenmasse, Dentalmassen, Schneidkeramik, Schleifmittel,
Oxidkeramik, Mahlkugeln, Ferrite, etc.
E-Mail
info@electroglass.co.uk
Stand
Hall 13, A83 (Page 540)
glasstec.01.03.05
Pelletising technology
Baustoffe
Product Overview
Porosierungsmittel für Ziegel, Blähton, Perlit, etc.
Electroglass Ltd.
glasstec.01.04.01
Batch charging technology
glasstec.01.04.02
Forehearth technology
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.08
Electrically heated systems
glasstec.05.01.01.01
Measurement and control of glass position detection
Glas
Glasmehl, Kohlenstoff, Bleiglasgemenge, etc.
Metallurgie
Eisen-, Zink- und Bleierze, Aluminiumoxid, Siliciumcarbid, etc.
Agrochemie
Kalkhydrat, Dolomit, Phosphatdünger, Torfdünger, Mineralstoffe, Zuckerrübensamen, etc.
© 2010 Messe Düsseldorf GmbH
157
© 2010 Messe Düsseldorf GmbH
158
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.04.02
Electroglass Ltd.
glasstec.01.04.08
Forehearth technology
Glass Level Sensors
Electroglass’ high quality electrode holders are the result of very
many years of continous research,development and experience.
The Electroglass Glass Level Sensor employs a static refractory probe block installed in the side of the furnace
working end or forehearth,equipped with fixed platinum alloy
probes,connected to the level sensing/control unit.The system
requires no water or air cooling or other special services.It has
no moving parts and is effectively maintenance free.
glasstec.01.04.03
Electrically heated systems
Super ”Molycool”Electrode Holders
Manufactured from the highest quality temperature resistant
steels,the Electroglass Super Molycool electrode holder is of advanced insulated design for energy saving and refractory block
protection,primarily designed for vertical
Smelting technology for tank furnaces
ELIAR ELEKTRONIK A.S.
All-Electric Furnaces
Electroglass designs and supplies continous cold-top
all electric glass furnaces with outputs ranging from
200kg per day,to 200 tonnes per day.
Address
Levazim Mah. Korukent Sit. A Blok
34340 Istanbul
Turkey
Electroglass electric furnaces are available for almost
every glass type,including soda lime glasses for
Phone
+90 212 2743031
containers or tableware,glass wool and continous fibre
glasses,hard and soft borosilicate glasses,
Fax
+90 212 2742030
Internet address
www.eliar.com.tr
E-Mail
eo@eliar.com.tr
Stand
Hall 14, C20 (Page 548)
flouride opal and borosilicate opal glasses,lead glassesfor tubing and tableware,TV panel/funnel glasses,and a range of special purpose and technical
glasses.
Convection Current Control Boosting Systems
Electroglass Convection Current Control(CCC)boosting technology was first introduced in the early 1980’s.
Continous development since then,and the experience of over
75 CCC syste,s in operation,he resulted in ever greater boost
energy effiency and glass quality improvement.
Product Overview
Convection Current Control Boosting releases heat directly
into the main body of the glass.By optimising electrode locations,spacing,immersions and electrical connection arrangements in relation to
each individual application,furnace and glass type,CCC boosting creates controlled positive convection currents in the furnace,improving heat transfer from
the top firing,increasing minimum residence times,homogenising the melt to produce fully refined glasswith a consistent thermal history.
© 2010 Messe Düsseldorf GmbH
159
glasstec.01.03.03
ELIAR ELEKTRONIK A.S.
Metering and weighing technology
Product Details
glasstec.01.03.03
ELIAR ELEKTRONIK A.S.
Metering and weighing technology
BATCH PLANT
© 2010 Messe Düsseldorf GmbH
160
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Elmag S.p.A.
Address
Product Details
Viale Elvezia, 35
22040 Monza / MI
Italy
glasstec.01.03.02
Elmag S.p.A.
Drying technology
SLIMCURE
Space saving UV curing system
Phone
+39 039 23611
Fax
+39 039 328202
Internet address
www.elmag.it
E-Mail
info@elmag.it
Stand
Hall 16, A19 (Page 556)
Product Overview
Elmag’s “SLIMCURE” system is suitable to be placed
on almost every kind of printing machine. It consists of an aluminium box with 3
fluid-cooled UV lamps.
One of the main problems in placing a UV system on a printing machine is due
to different mechanical features often hindering a correct placement of the UV
source.
Elmag S.p.A.
glasstec.01.03.02
Drying technology
glasstec.02.03.08.04
Other printing technology
glasstec.02.06.05
When space is lacking to cure photosensitive varnishes
and inks, it is necessary to use UV units to be installed
on the printing machine.
Elmag’s SLIMCURE has a very small multi-elliptical reflector with a very good
focusing at different distances, to fit every type of mechanical construction.
A closed circuit through the box and the reflectors with the aid of a refrigerating
unit ensures a cold fluid circulation that keeps the temperature in the SLIMCURE
SYSTEM UNDER 50° C during operation. The circuit is equipped with quick
couplings enabling fast disassembly and maintenance.
A cooled plate is also placed next to the sheet to be cured to keep it at an adequate temperature. In case of substrates especially sensitive to heat, it is possible to use Coldcure system.
Dryers and decorating technology
The lamps are air-cooled. The cooling system is equipped with automatic adjustment, which allows keeping the light bulb at a correct working temperature
for all required levels of power.
glasstec.03.10.03.01.06.02
Coating of automotive glass
glasstec.03.10.03.01.06.03
Coating of flat glas
glasstec.03.10.03.01.06.04
Coating of sand-blasted glass
The lamps that Elmag uses in its units are the result of a severe research and a
20 years long selection. These lamps can operate from 60 to 160 W/cm and, if
required, have a 3-steps or stepless adjustment from 60 W/cm to max. power.
glasstec.03.10.03.02.12Spray tools, equipment and spray paints
Each UV unit can be equipped with a swivelling device to prevent overheating
and conveyor belts wear in case of line stop or emergency.
The electrical equipment is installed inside a control cabinet built according to
I.E.C. standards. It has a fan ventilation system and a PLC . The lamps’ power
supply units are easily reachable and follow existing standards.
Optionally it is possible to install an in-line display equipped equipped with troubleshooting system. It can perform standard and special control operations: -
© 2010 Messe Düsseldorf GmbH
161
© 2010 Messe Düsseldorf GmbH
162
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
separated visual indication of failures - machine production per hour - daily production - advancement of production order - conveyor speed - electrical control
of each lamp.
glasstec.01.03.08
Raw material technology and prewarming cullet
technology
glasstec.01.03.09
Colour sorting (cullet)
glasstec.01.04.01
Batch charging technology
glasstec.01.04.12
Processing of water cooling for cullet treatment
glasstec.01.10.02
Cullet transportation
glasstec.05.03.04
Process control systems
glasstec.06
Contracting, consulting, engineering, services
EME Maschinenfabrik Clasen GmbH
Address
Wockerather Weg 45
41812 Erkelenz
Germany
Phone
+49 2431 96180
Fax
+49 2431 74687
Internet address
www.eme.de
E-Mail
contact@eme.de
Stand
Hall 15, B37 (Page 552)
Product Details
glasstec.01.03.03
EME Maschinenfabrik Clasen GmbH
Metering and weighing technology
CULLET TREATMENT
Product Overview
EME Maschinenfabrik Clasen GmbH
As a result of the continued rise in the cost of raw materials and energy, and increased environmental awareness in the population a higher proportion of recycled
glass is now added to the melt.
glasstec.01.03.01
Crashing and grading
glasstec.01.03.03
Metering and weighing technology
glasstec.01.03.04
Mixing technology
The most common contaminants are adherent dirt, ceramics, metal closures,
paper and plastic. Cullet treatment plant is used to remove these contaminants
so that good glass quality is retained even when a high
glasstec.01.03.06
Cullet preparation
proportion of cullet is added to the melt.
Recycled foreign cullet always contains contaminants
that can lead to gas or stone formation, or other faults
in the final product.
EME have developed treatment concepts and equipment for all glass sectors
and applications, including:
• Holloware
• Glass wool
© 2010 Messe Düsseldorf GmbH
163
© 2010 Messe Düsseldorf GmbH
164
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
• TV tubes and
Product Overview
• Laminated glass.
Many factors govern the decision about the type of treatment method to be used.
We should be pleased to discuss which installation concept would be most suitable for your application.
FACTORY CULLET TREATMENT
During glass production cullet is created on the processing machines. Experience has shown that it is important to treat the cullet in the factory itself and return
it to the melting process. This not only largely reduces
the risk of contamination by foreign objects,
but also avoids unnecessary and, above all, uneconomic transport and intermediate storage. A cullet recycling system should be
installed on each melter, so that different glass types do not become mixed.
Emhart Glass S.A.
Address
Hinterbergstr. 22
6330 Cham 2
Switzerland
Phone
+41 41 7494200
Fax
+41 41 7494271
Internet address
www.emhartglass.com
E-Mail
webmaster@emhartglass.com
Stand
Hall 13, C43 (Page 540)
© 2010 Messe Düsseldorf GmbH
165
Emhart Glass S.A.
glasstec.01.06.01
Gob feeder
glasstec.01.06.05
Shear blades
glasstec.01.06.06
Blowing machines
glasstec.01.06.07
Press machines
glasstec.01.06.08
Press-blow-machines
glasstec.01.06.12
Bottle and glass container machines
glasstec.01.06.16
Spray Systems for gob forming
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.05.01.01.01
Measurement and control of glass position detection
glasstec.05.01.01.04
Measurement and control of glass thickness
glasstec.05.01.01.05
Measurement and control of glass temperature
glasstec.05.01.01.06
Measurement and control of speed
glasstec.05.01.01.07
Measurement and control of glass tension
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
glasstec.05.01.05
Control and automation technology
glasstec.06
Contracting, consulting, engineering, services
© 2010 Messe Düsseldorf GmbH
166
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.06.01
Emhart Glass S.A.
555 Servo Feeder
Improves gob forming and loading at rates from 1 to 250
cuts / minute Allows user to change feeder plunger parameters while feeder is running Speeds job changes
and allows quick save / recall of all critical job information
555 Servo Feeder
Improves gob forming and loading at rates from 1 to 250
cuts / minute Allows user to change feeder plunger parameters while feeder is running Speeds job changes
and allows quick save / recall of all critical job information
glasstec.01.06.05
EMMETI
Gob feeder
Address
Via Galilei, 29
42027 Montecchio Emilia / RE
Italy
Phone
+39 0522 861911
Fax
+39 0522 861912
Internet address
Shear blades
E-Mail
zambrelli@emmeti-spa.it
Stand
Hall 13, A65 (Page 540)
565 Servo Shear
Product Overview
Parallel Shears - Quick reliable cutting at rates of 1 to
250 cuts / minute Synchronized cutting forms consistent gob shapes and weights with reduced shear marks
Improves gob loading
EMMETI
glasstec.01.03.05
Pelletising technology
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.04
Packing lines - boxes, shrinking, hoop-casing
machinery
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
565 Servo Shear
Parallel Shears - Quick reliable cutting at rates of 1 to
250 cuts / minute Synchronized cutting forms consistent gob shapes and weights with reduced shear marks
Improves gob loading
Product Details
glasstec.01.03.05
EMMETI
Pelletising technology
Pallet Formation Area
The formation area can be equipped with a range
of options to condition the layer before being palletized. These operations involve strapping and horizontal banding.
© 2010 Messe Düsseldorf GmbH
167
© 2010 Messe Düsseldorf GmbH
168
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
EMP GmbH
Row preparation and Transfer Area
Address
The essential component configures the layer of round
containers according to the preset palletization pattern.
It can be push-type. with liftable guides, or grip-type,
operating with pneumatic grippers. The push-operating
version can treat up to 7 rows at a time, at a speed of 8
cycles per minute.
Ludwig-Jahn-Str. 6b
98693 Ilmenau
Germany
Phone
+49 3677 20-1989
Fax
+49 3677 20-5136
Internet address
www.emp-glass.com
E-Mail
info@emp-glass.com
Stand
Hall 14, B06 (Page 548)
The stacker can also be equipped with devices to allow layer formation to cope
with horizontal strapping. Special equipment is also available for the treatment
of non cylindrical containers (square, rectangular, oval, triangular).Row preparation and Transfer Area
The essential component configures the layer of round
containers according to the preset palletization pattern.
It can be push-type. with liftable guides, or grip-type,
operating with pneumatic grippers. The push-operating
version can treat up to 7 rows at a time, at a speed of 8
cycles per minute.
Product Overview
The stacker can also be equipped with devices to allow layer formation to cope
with horizontal strapping. Special equipment is also available for the treatment
of non cylindrical containers (square, rectangular, oval, triangular).-
© 2010 Messe Düsseldorf GmbH
169
EMP GmbH
glasstec.01.04.02
Forehearth technology
glasstec.01.04.08
Electrically heated systems
glasstec.01.05.02
Glass drawing technique
glasstec.01.05.03
Casting and rolling technology
glasstec.01.06.01
Gob feeder
glasstec.01.06.03
Suck feeder
glasstec.01.06.04
Bar feeder
glasstec.01.07
Equipment for glass tube production
glasstec.06
Contracting, consulting, engineering, services
© 2010 Messe Düsseldorf GmbH
170
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
EMP GmbH
Product Overview
glasstec.01.06.04
Ernst Pennekamp GmbH & Co. oHG
Bar feeder
Direct Heated Platinum System - DHPS®
The D irect H eated P latinum S ystems - DHPS ® designed by EMP are used
for high tech glass feeding. The DHPS ® is made by precious metal alloy.
This guaranties that even at high temperatures no impurities by corrosion of
the feeder material contaminate the glass melt. The DHPS ® contains of one or
more separated electrical heated modules. Current heats up the tubes of precious metal alloy. The temperature is transmitted to the glass melt. In this way
the glass melt can be cooled down or heated up regularly. In different modules
of the DHPS ® the chemical homogeneity of the glass melt can be improved (for
example by stirring) up to optical quality. In the DHPS ® - Refiner bubbles up to
0.1 mm can be eliminated and the gas content in the glass melt can be reduced.
All DHPS ® of the company EMP are tailor-made designed and manufactured
according to the customer’s demands (glass type, pull rate etc.).
Ernst Pennekamp GmbH & Co. oHG
Address
Königsfelder Str. 38-42
58256 Ennepetal
Germany
Phone
+49 2333 605-0
Fax
+49 2333 605-200
Internet address
www.pennekamp.de
E-Mail
pjastremski@pennekamp.de
Stand
Hall 14, D20 (Page 548)
glasstec.01.09.02
Stacker systems
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.01.09.04
Decorating lehrs
Product Details
glasstec.01.09.04
Ernst Pennekamp GmbH & Co. oHG
Decorating lehrs
PENNEKAMP DECORATING LEHR
The Decorating Lehr design follows the standard Pennekamp modular sections
at a length of 2,25m. However Pennekamp has introduced some well proven
details in order to make the lehr more efficient and productivity as well as to
reduce energy consumptions. In addition a special attention has been drawn to
the O2 content inside the lehr during the process to ensure a perfect quality.
• lehr belt width of up to 4,5 m • all heated sections with heat-resistant stainless
steel inner hoods, circulation fans, lehr belt crates • stainless steel front plates to
avoid any corrosion particles getting into the production • fully insulated lehr up
to the cold end (insulation 300 mm plus 25 mm ceramic fiber mat) • maximum
outside wall temperature of 20°C above ambient temperature • direct shaft circulating fans, no V-belt ( maintenance free) • process controlled air inlets at the
fast cooling sections • reacts to production stops to hold the temperature curve
• electronical control system to automatically optimize air movements inside the
lehr to recover energy and cut down the consumption (Draft Control) • automatic
oxygen level control • special fan blades at cold end to mix together the cold air
with internal air before it gets contact with the glass • system ensures optimal
temperature distribution across the lehr belt width • easy to adjust belt tracking
device at the lehr belt drive • internal belt return with self-cleaning device • controlled exit temperatures • compact burner system covering all safety devices
as: • central air extraction fan to reuse heat energy • electrical heating system
based on thyristor units for control
Option: • PLC to control with operator panel
© 2010 Messe Düsseldorf GmbH
171
© 2010 Messe Düsseldorf GmbH
172
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Handle Shears type GS.
Essemce AB
Address
Blade length Handle length
Maskinvägen 2
361 42 Lindas
Sweden
GS-1N 75 mm 155 mm
Phone
+46 471 18680
GS-2N 85 mm 170 mm
Fax
+46 471 18699
Internet address
www.essemce.se
E-Mail
jan.melin@essemce.se
Stand
Hall 14, B23 (Page 548)
GS-1S 85 mm 135 mm
GS-2S 85 mm 140 mm
GS-3N 105 mm 170 mm
GS-3S 105 mm 155 mm
EUROMATIC S.r.l.
Product Overview
Essemce AB
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.02.03.02.02
Surface grinding for moulded glass
glasstec.02.11.01
Tools
glasstec.04.01.03
Tools and smelting equipment for glass makers
Product Details
glasstec.01.06.17
Essemce AB
Address
Via La Malfa, 4
24047 Treviglio
Italy
Phone
+39 0363 303200
Fax
+39 0363 301720
Internet address
www.euromatic.it
E-Mail
info@euromatic.it
Stand
Hall 13, C12 (Page 540)
Aids for the forming of hollow glass
SHEARS
All shears, except GS-4, can be supplied with normal
(N) or small (S) handles.
Size ”N” with yellow coating and ”S” with red.
© 2010 Messe Düsseldorf GmbH
173
© 2010 Messe Düsseldorf GmbH
174
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
ZETA 103
Product Overview
EUROMATIC S.r.l.
glasstec.01.06.11
Ampoule and laboratory glass machines
glasstec.01.06.12
Bottle and glass container machines
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.01.09.04
Decorating lehrs
glasstec.01.12.01
Hot end coating
glasstec.01.13.02
Transport and handling systems
is the fastet high precision system for the production of pharmaceutical cartridges from glass tubes, mainly used for dental anaesthetics and insulin for diabetics‘pen systems. Making
use of our know- how and the state- of- the- art technology.
Euromatic offers innovative equipment with hihg performances
both in terms of precision and production speed.
Eurostar Concrete Technology S.p.A.
Address
Via delle Industrie, 49
33050 Pavia di Udine / Udine
Italy
Phone
+39 0432 655687
Fax
+39 0432 655166
Internet address
www.ectmix.com
E-Mail
ectmix@ectmix.com
Stand
Hall 15, A54 (Page 552)
glasstec.02.03.08.01.01Screen printing techniques
Product Details
glasstec.01.06.11
EUROMATIC S.r.l.
Ampoule and laboratory glass machines
ZETA 103
is the fastet high precision system for the production of pharmaceutical cartridges from glass tubes, mainly used for dental anaesthetics and insulin for diabetics‘pen systems. Making
use of our know- how and the state- of- the- art technology.
Euromatic offers innovative equipment with hihg performances
both in terms of precision and production speed.
Product Overview
ZETA 103
glasstec.01.03.04
is the fastet high precision system for the production of pharmaceutical cartridges from glass tubes, mainly used for dental anaesthetics and insulin for diabetics‘pen systems. Making
use of our know- how and the state- of- the- art technology.
Euromatic offers innovative equipment with hihg performances
both in terms of precision and production speed.
© 2010 Messe Düsseldorf GmbH
175
Eurostar Concrete Technology S.p.A.
Mixing technology
© 2010 Messe Düsseldorf GmbH
176
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.03.04
Eurostar Concrete Technology S.p.A.
Eurostar Specials
All of the EPM and GTM mixers are engineered, designed and fabricated in our work facilities, special requirements can be implemented as all of our staff have
been in the mixing industry over 20 years.
Mixing technology
Combining applications.
Our GTM series combined with Customers equipments
Specials
Special applications and requirements implemented in
various fields.
Detail rendering
On all our mixers meticulous attentions to details is a
constant.
Tower Twins
In the Eurostar GTM series we have placed years of experience onto this superb range of planetary mixers
Eurostar Mixing System
The unique rhomboid shape of the mixing blades together with the synchronized action achieves a high degree of homogeniety in the mix in a comparatively short
time.
Tower twins with Eurostar planetary mixers
Built to withstand high production requirements, enhanced to meet the latest and high demanding needs
of modern mixing.
Eurostar Mixing System
The mixing system with its reversible mixing blades,
synchronized and coordinated movements produce material of homogeneous consistency.
Eurostar Planetary Mixers
On every Eurostar Planetary Mixer or Low Profile Skip
Hoist we fabricate, from the planetary gearbox we have
engineered and built, to the onboard Engineering, embodies high quality materials and our know-how.
© 2010 Messe Düsseldorf GmbH
177
© 2010 Messe Düsseldorf GmbH
178
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
from the outset. These challenges together create a high demand for quickly
available verifiable measurement and test values.
euroTECH GmbH
Address
Dammstr. 1
72351 Geislingen
Germany
Phone
+49 7433 90468-0
Fax
+49 7433 90468-13
Internet address
www.euro-tech-vacuum.de
E-Mail
info@euro-tech-vacuum.de
Stand
Hall 15, A03 (Page 552)
For experimental and solar technology load tests of collectors and mounting
systems, the euroTECH test control unit has different movable suction units. It
is possible to measure compressive and tensile forces of 300 kg or more per
lifting cylinder. The heart of the test control unit is the electronic control center
with an easy to operate, multifunctional display. It adjusts for the extremes of
compressive and tensile forces in combination with variable measuring times
– far beyond the required standards. The measuring data and performance
diagrams are directly transferred to the PC via interfaces. Users get a flawless
documentation for evaluating their products. Defects of material or workmanship
are recognized early and can be corrected immediately.
euroTECH offers the test control unit with different additional components as
a modular system. Depending on module sizes and testing requirements the
control unit can be configured individually.
Product Overview
Company News
euroTECH GmbH
euroTECH GmbH
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
On the glasstec 2010 in Düsseldorf euroTECH Vacuum
Technologies shows a patented test control unit for
measuring resistance to pressure and tensile strength,
of solar collectors and large-scale glass elements.
With this unit and its versatile options for simulations,
manufacturers can measure, test and evaluate on their
own, without depending on testing institutes. The unit
was designed and built by euroTECH being in close
contact with leading German testing institutes. The project was promoted by
the Federal Ministry for Economy and Technology according to a decision of the
German Bundestag.
glasstec.01.13.08
Construction and glazing equipment
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
glasstec.02.11.07
Vacuum pumps
With this test control unit euroTECH is responding to the growing requirements of
the solar industry: higher speed in research and development, improved quality
assurance within the production processes and minimizing the risk of damage to
collectors caused by extreme weather conditions. In particular the system generates complete quality control documentation over the manufacturing process,
providing an indisputable basis for avoiding complex claims for compensation
Abstapelanlagen
09/16/2010
Fast, safe, independent: euroTECH builds test control
units for internal collector tests in the solar industry
© 2010 Messe Düsseldorf GmbH
179
Product Details
glasstec.01.13.01
euroTECH GmbH
Feeding and stacking systems
Komplettausrüstungen für Ab- stapelanlagen unter Einhaltung höchster Qualitäts- und Sicherheitsrichtlinien
© 2010 Messe Düsseldorf GmbH
180
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.13.02
EWK Umwelttechnik GmbH
Transport and handling systems
Transportsysteme
Address
Barbarossastr. 30
67655 Kaiserslautern
Germany
Phone
+49 631 3577-0
Fax
+49 631 3577-111
Internet address
www.ewk.de
E-Mail
umwelt@ewk.de
Stand
Hall 14, E49 (Page 548)
Transportsysteme in zahlreichen Ausführungen und unter Berücksichtigung der
individuellen Wünsche und Anforderungen
glasstec.01.13.08
Construction and glazing equipment
Hebegeräte für die Glasindustrie
Beispiel eines Verglasungsgerätes
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
Einzelkomponenten
ob Serie oder Sonderanfertigung, Sie erhalten unsere
Komponenten und Saugplatten in fast allen Größen und
Materialien passend für Ihre Anwendung
Product Overview
EWK Umwelttechnik GmbH
glasstec.01.04.10
NOx control technology
glasstec.01.04.11
Filter technologies (smoke and electrostatic)
glasstec.02.12.04
Purification of exhaust gases
Product Details
glasstec.01.04.11
EWK Umwelttechnik GmbH
Filter technologies (smoke and electrostatic)
Filternde Abscheider FAB
Entstaubungsprobleme individuell und optimal lösen
Gewebefilter stellen eine Alternative zum Elektrofilter dar und eignen sich vornehmlich zur Abscheidung trockener Stäube.
Individuell auf die Betriebsverhältnisse eingehen:
Je nach Anwendungsfall werden Rund-, Kammer- oder Reihenfilter eingesetzt.
Die Bestückung erfolgt mit
© 2010 Messe Düsseldorf GmbH
181
© 2010 Messe Düsseldorf GmbH
182
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Flachschläuchen
Excelsius Global Services GmbH
Rundschläuchen
Filterpatronen
Address
Bgm.-Dr.-Nebel-Str. 14
97816 Lohr
Germany
Phone
+49 9352 604400
Fax
+49 9352 604419
Internet address
www.excelsius-global.com
E-Mail
info@excelsius-global.com
Stand
Hall 15, A46 (Page 552)
Stützgewebe und Nadelfilz- Qualität werden je nach Schadgaskomponenten
und Betriebstemperaturen festgelegt.
Die möglichen Abreinigungsverfahren sind:
Druckluft Jet-Pulse on-/off-line
Verfahrende Mitteldruck off-line
Verfahrende Druckluft off-line
Trockensorption
Trockensorption mittels KUV (Kugelrotor-Umlauf-Verfahren)
Viele Verbrennungs- und Produktionsprozesse entwickeln überdies umweltgefährdende Schadgaskomponenten wie z.B.
SOx, HCl, Hg, HF oder
PCDD/PCDF, die einzeln oder
in Kombinationen oft auch
Product Overview
zusammen mit Flugstaub
glasstec.01.04.09.01
Excelsius Global Services GmbH
auftreten können.
Combustion technology for oil and gas fired smelting
furnaces
Diese können durch Zugabe von Additiven wie Calciumhydroxid
Product Details
Excelsius Global Services GmbH
Ca(OH)2 und/oder Aktivkohle bzw. Herdofenkoks in den
glasstec.01.04.09.01
Rohgasstrom adsorptiv gebunden und im nachfolgenden
Combustion technology for oil and gas fired smelting
furnaces
Gewebefilter abgeschieden
Service
werden. Mit dem LÜHR-Kugelrotor werden hohe Sorptionsraten und Abgasabscheidegrade erreicht.
*Heat-ups and Commissioning
*Controlled Cool-Downs
*Expansion & Contraction Measurement and Control
*Hot-Hold with Production Continuation Capability
*Cullet-Fill
*Furnace Tap & Drain
*Regenerator Melt-Out
*Furnace Drilling/Electrode Installation
© 2010 Messe Düsseldorf GmbH
183
© 2010 Messe Düsseldorf GmbH
184
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.03
Conveying, sorting and storage facilities
glasstec.01.13.04
Packing lines - boxes, shrinking, hoop-casing
machinery
F.O.R.T.E. Srl
Address
Via Melchiorre Gioia, 19
29017 Fiorenzuola d’Arda / PC
Italy
Phone
+39 0523 981535
Fax
+39 0523 242344
Product Details
Internet address
E-Mail
Stand
www.fortesrl.net
glasstec.01.04.02
F.O.R.T.E. Srl
Forehearth technology
AUTOMATION
info@fortesrl.net
F.O.R.T.E. Srl are specialized in automation and control systems for the glass
industry, with special care of:
Hall 13, D63 (Page 540)
> Furnace control
> Distributors and forehearth control
Product Overview
F.O.R.T.E. Srl
glasstec.01.04.01
Batch charging technology
glasstec.01.04.02
Forehearth technology
glasstec.01.04.03
Smelting technology for tank furnaces
> Auxiliary control
> Boosting system control
F.O.R.T.E. Srl are skilled in the following sectors:
> Industrial electrical systems
> Water treatment systems
> Industrial automation and instrumentation
> Process control
glasstec.01.04.06
Regenerative systems
glasstec.01.04.07
Recuperative systems
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
glasstec.01.12.02
Cold end coating
> Loop-Diagram, P&I and Flow-Chart development
> Signal transfer and handling with traditional technology
> Signal transfer and handling with field bus
> Software for PLC and PC (SCADA/HMI) for plant supervision
> Remote stations for monitoring, control and assistance of software application
packages (supervision, management, etc.) via Local Area Network (LAN) or
Wide Area Network (WAN)
F.O.R.T.E. Srl provide technical consultancy, maintenance, design, production
and installation of automation systems, by integrating instrumentation and software programs and supplying auxiliary as well as ‘turn-key’ systems.
© 2010 Messe Düsseldorf GmbH
185
© 2010 Messe Düsseldorf GmbH
186
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
By previous severe tests, F.O.R.T.E. Srl provide their Customers with the best
instrumentation for industrial and laboratory process control, thus guaranteeing
working life and reliability.
Falorni Gianfranco srl
Address
Viale IV Novembre, 15
50053 Empoli (FI)
Italy
Phone
+39 0571 92-2333
F.O.R.T.E. Srl are specialized in automation and control systems for the glass
industry, with special care of:
Fax
+39 0571 92-0816
> Furnace control
Internet address
www.falorniglass.com
E-Mail
info@falorniglass.com
Stand
Hall 14, D06 (Page 548)
The experience of F.O.R.T.E. Srl engineers together with a flexible and dynamic
organization, guarantees the Customer with immediate assistance for the systems and instrumentation installed.
AUTOMATION
> Distributors and forehearth control
> Auxiliary control
> Boosting system control
F.O.R.T.E. Srl are skilled in the following sectors:
> Industrial electrical systems
> Water treatment systems
Product Overview
> Industrial automation and instrumentation
glasstec.01.04.03
Falorni Gianfranco srl
Smelting technology for tank furnaces
> Process control
> Loop-Diagram, P&I and Flow-Chart development
Product Details
> Signal transfer and handling with traditional technology
glasstec.01.04.03
> Signal transfer and handling with field bus
Falorni Gianfranco srl
Smelting technology for tank furnaces
MINIGLASS
> Software for PLC and PC (SCADA/HMI) for plant supervision
> Remote stations for monitoring, control and assistance of software application
packages (supervision, management, etc.) via Local Area Network (LAN) or
Wide Area Network (WAN)
OPERATION
F.O.R.T.E. Srl provide technical consultancy, maintenance, design, production
and installation of automation systems, by integrating instrumentation and software programs and supplying auxiliary as well as ‘turn-key’ systems.
Start : pressing start button, the fan starts rotating. After that the spark plug is energised and finally the gas
valve is switched on.
By previous severe tests, F.O.R.T.E. Srl provide their Customers with the best
instrumentation for industrial and laboratory process control, thus guaranteeing
working life and reliability.
Heating up : it’s programmable. It’s recommended to
increase the temperature less than 20°C/hour.
The experience of F.O.R.T.E. Srl engineers together with a flexible and dynamic
organization, guarantees the Customer with immediate assistance for the systems and instrumentation installed.
To speed up the melting of the batch we recommend to fill the furnace in 3 - 4
steps.
© 2010 Messe Düsseldorf GmbH
187
Batch charging : it’s starts when the temperature is about 1350 °C.
Melting and working : it’s enough to set the proper temperature and the furnace
© 2010 Messe Düsseldorf GmbH
188
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
will follows your instructions.
Product Details
glasstec.01.03.04
SAFETY
Fejmert Mixer AB
Mixing technology
Glass and Ash Mixers
Flame control: a photo cell monitors the flame and in case stops the gas to the
burner.
Gas pressure reducer : equipped with max pressure shut off valve.
Audible alarm : it’s energised when the gas shut off valve is off and when the
temperature is out of the limits.
Mixers for the above industries are our speciality - contact
us!
All Fejmert Mixers can be equipped with a material hoisting
skip of a remarkably sturdy design, which in addition can be
fitted with an electronic weighing system.
The speed of the skip and the length and inclination of track is custom-adapted
to suit each specific installation.
Fejmert Mixer AB
Address
Nyköpingsvägen 19
611 50 Nyköping
Sweden
Phone
+46 155 58200
Fax
+46 155 58179
Internet address
www.fejmert.se
E-Mail
fejmert@fejmert.se
Stand
Hall 15, D03 (Page 552)
Product Overview
Glass and Ash Mixers
Mixers for the above industries are our speciality - contact
us!
All Fejmert Mixers can be equipped with a material hoisting
skip of a remarkably sturdy design, which in addition can be
fitted with an electronic weighing system.
The speed of the skip and the length and inclination of track is custom-adapted
to suit each specific installation.
Fejmert Mixer AB
”FP-RM” Range of Mixers
glasstec.01.03.04
Mixing technology
This mixer type is focused mainly on the Ready-Mix Sector, available in five
different models, from 2250 to 6000 litres input capacity.
”FP-RM” Range of Mixers
This mixer type is focused mainly on the Ready-Mix Sector, available in five
different models, from 2250 to 6000 litres input capacity.
© 2010 Messe Düsseldorf GmbH
189
© 2010 Messe Düsseldorf GmbH
190
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
”S” Range of Mixers
Product Overview
The ”S” Range of mixers is commonly used in the Concrete
Products and Precast Industry and is available in twelve different models, from 150 to 6000 litres input capacity.
Ferro Corporation, Glass Systems Division
glasstec.01.04.13
Feeder colouring
glasstec.02.05.02
Laser-marking technology
glasstec.02.06.02
Enamel glass machines, screen printers, thermal
pressure equipment
glasstec.03.01.01
Float and mirror glass
glasstec.03.02.01
Tempered glass
glasstec.03.02.02.01
Laminated safety glass
glasstec.03.02.10
Printed glass
glasstec.03.02.12
Self-cleaning glass
1000 Lakeside Avenue
44114-7000 Cleveland, OH
USA
glasstec.03.03
Automotive glass
glasstec.03.05.07
Glass bricks
Phone
+49 69 27116-0
glasstec.03.07.04.01
Photovoltaic systems
Fax
+49 69 27116-368
glasstec.03.07.12
Worked flat glass (general)
Internet address
www.ferro.com
glasstec.03.10.01.04.04Nano coating technology
E-Mail
glass.systems@eu.ferro.com
glasstec.03.10.03.01.06.03
Coating of flat glas
Stand
Hall 11, D69 (Page 536)
Product Details
”S” Range of Mixers
The ”S” Range of mixers is commonly used in the Concrete
Products and Precast Industry and is available in twelve different models, from 150 to 6000 litres input capacity.
Ferro Corporation, Glass Systems Division
Address
glasstec.01.04.13
Ferro Corporation, Glass Systems Division
Feeder colouring
Color and Glass Performance Materials
Performance Pigments and Colors Ferro Performance Pigments and Colors
© 2010 Messe Düsseldorf GmbH
191
© 2010 Messe Düsseldorf GmbH
192
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
(PPC) develops, produces, and markets color stains, special glasses, glazes,
decoration colors, and special coating materials for the ceramic industry, as well
as pigments for the paint and plastic industries.
Glass Systems Ferro Glass Systems supplies innovative glass colors and coatings that add value to automotive, flat and container glass in the global market.
The Ferro Glass Systems brand is built around innovation, quality, technical service and global reach.
Forehearth coloration was pioneered by Ferro as a cost-effective alternative to
coloration in the glass tank (particularly for special colors or short campaigns)
for glass bottles, tableware, giftware and architectural glass.
For more information, the following Product Information Sheets are available:
* Instant Color Plus Brochure * Inclusion Pigments Brochure * Intense Inclusion
Pigments Brochure * New Inclusion Pigments Brochure * Color Stains for the
U.S. Market * Color Variations 2009 Brochure * Color Variations 2010 Brochure
FIB Belgium s.a.
Address
Avenue Landas 4, Zoning de Saintes
1480 Tubize
Belgium
Phone
+32 2 3321717
Fax
+32 2 3763711
Internet address
www.fib.be
E-Mail
info@fib.be
Stand
Hall 14, D05 (Page 548)
Color Stains
Today, Ferro is one of the largest supplier of ceramic
pigments (stains) in the world. We have color plants
and laboratory facilities that are located in all of the major ceramic manufacturing countries, in order to provide
customers with any needed local technical service. Our
pigments are man-made materials, which closely duplicate the properties of their natural parents and have withstood the corrosive
action of the sun, wind, and rain for centuries. So it follows that the “artificial
mineral” will exhibit comparable properties, such as high stability and chemical
inertness.
In addition to developments in firing technology to facilitate energy savings,
the preparation of colored/raw/glaze slip is also changing to a faster and lessexpensive process. There is a trend to eliminate ball milling, in favor of rapid
dispersion techniques. For this reason, we have paid special attention to the
dispersability of the pigments in the glaze slip, resulting in a new range of readily dispersible stains for ceramic glazes, appropriately named InstantColor and
InstantColor Plus.
A comprehensive palette of vivid and attractive pigments, formulated for a wide
spectrum of glaze types and processing conditions, is offered to our customers
world wide. Our Inclusion Pigments (based on stable Zr-Cd-Se and Zr-Cd complexes) offer users the ability to produce vivid, eye catching Red, Orange and
Yellow glazes at high temperatures.
For customers who require stains for colored bodies and engobes, we have a
wide spectrum of stable, consistent pigments, which are manufactured under
strict processing conditions to meet the technological and application needs of
the market and the evolving types of body now being offered.
To request full technical brochures on all Ferro body and glaze stains, please
complete the Web Inquiry Form.
© 2010 Messe Düsseldorf GmbH
193
Product Overview
glasstec.01.04.09.01
FIB Belgium s.a.
Combustion technology for oil and gas fired smelting
furnaces
Product Details
glasstec.01.04.09.01
FIB Belgium s.a.
Combustion technology for oil and gas fired smelting
furnaces
OIL TEMPERED WIRE
Oil tempering process is the term commonly used in the wire industry to designate a type of wire which receives a hardening and tempering treatment after it
has been drawn to the desired size.
The term is in fact incorrect as the process consists of a heating above the critical
temperature, one oil quenching and one reheating or tempering (usually in lead)
© 2010 Messe Düsseldorf GmbH
194
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
to relieve the quench hardness obtained. Nowhere in the sequence is oil to be
found as the tempering medium.
This type of wire is recognized by the springmakers because of its combination
of excellent elastic properties and good toughness.
In that field, FIB has developed a concept of line where both the stability of the
temperature of the equipments is taken into account as the cooling efficiency of
the oil quenching bath. Our design of lines has successfully treated wire size
from 0,3 mm up to 25 mm.
In a world where the use of lead is more and more avoided, the fluidised bed
has probably a place to be considered in that process.
Fickert & Winterling, Maschinenbau GmbH
Address
Product Overview
Fickert & Winterling, Maschinenbau GmbH
glasstec.01.05.02
Glass drawing technique
glasstec.01.05.03
Casting and rolling technology
glasstec.01.13.03
Conveying, sorting and storage facilities
glasstec.02.01.01.03
Cutting technology for technical glass
glasstec.02.01.02
Glass saws
Product Details
Fickert & Winterling, Maschinenbau GmbH
Wölsauer Str. 20
95615 Marktredwitz
Germany
Flachglasziehmaschine
Phone
+49 9231 502-0
Flachglasziehmaschine im DOWNDRAW-Verfahren,
OVERFLOW als auch in Düsentechnik.
Fax
+49 9231 502-52
Internet address
www.fickertwinterling.de
E-Mail
info@fickertwinterling.de
Stand
Hall 13, A88 (Page 540)
© 2010 Messe Düsseldorf GmbH
glasstec.01.05.02
Glass drawing technique
in
Sheet glass drawing machines - ”Fourcault” & ”Pittsburgh”
Sheet glass drawing machines, FOURCAULT system and
PITTSBURGH system for drawing flat glass in all required
glass band widths.
195
© 2010 Messe Düsseldorf GmbH
196
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.05.03
Fima - Olimpia Fonderie S.p.A.
Casting and rolling technology
Cast glass cutting line Type GCL
Address
Strada di Poneta, 17
50021 Barberino Val d’Elsa / FI
Italy
Phone
+39 055 8073048
Fax
+39 055 8073171
Internet address
www.fimaolimpia.it
E-Mail
info@fimaolimpia.it
Stand
Hall 13, A11 (Page 540)
The cast glass cutting line GCL is used to format the
endless glass band into single sheets.
The cast glass cutting line GCL is available in working
widths up to 2.750 mm.
KWM
The cast glass rolling machine KWM is used for continuous rolling of raw, figured and wired glass. With special coated transport rollers the machine is the perfect
option for solar glass production. High efficiency of the
machine is guaranteed by the sturdy construction and
the smooth, precise operation.
Product Overview
The cast glass rolling machine KWM is available in
working widths up to 2,750 mm and a maximum roller diameter of 300 mm.
A wide range of adjustments enable the adaptation of the cast glass rolling machine to the various melting furnace conditions.
glasstec.01.06.13
Fima - Olimpia Fonderie S.p.A.
Moulds for glass production
Product Details
glasstec.01.06.13
Fima - Olimpia Fonderie S.p.A.
Moulds for glass production
Moulds
Hanving the most modern equipments for controls and
quality, FIMA OLIMPIA Fonderie has been specialising
for many years in the production of special cast irons
for the glass industry moulds, alloyed to Fe-Vn, Fe-Mo,
Fe-Cr, Fe-Ti and Nickel. The very flexible and dynamic
organisation structure, allows us to give right answers
the needs of this market. We have an internal mould model department whit
a specialised staff for the building of models and three furnaces for heat treatments.
© 2010 Messe Düsseldorf GmbH
197
© 2010 Messe Düsseldorf GmbH
198
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Fives Stein Ltd.
glasstec.01.04.09.02
Address
4A Churchward, Southmead Park
OX11 7HB Didcot, Oxon
United Kingdom
Phone
+44 1235 81-1111
Fax
+44 1235 81-7676
Internet address
www.fivesgroup.com/fivesstein/uk
E-Mail
fivesstein-uk@fivesgroup.com
Stand
Hall 13, C73 (Page 540)
Product Overview
Batch charging technology
glasstec.01.04.02
Forehearth technology
Combustion technology for oxygen heating systems
Fives Stein experience in float glass plant
A float glass plant consists of the following main sections: 1. The storage area for
the treated raw materials, 2. The batch processing plant, 3. The melting furnace
section 4. The air pollution control 5. the tin bath section 6. the annealing
lehr section 7. the protective atmosphere generation plant, 8. the glass panes
storage building.
Fives Stein has developed all its strategy over the years around its core business
which is to design and supply thermal equipment dedicated to the glass industry.
Fives Stein has the capability to provide for your float glass project the complete
hot end package based on independent and renowned technology.
Fives Stein is mostly renowned as being the reference partner of many new
float glassmakers in the world, and of all the successful independent European
projects, i.e. EUROGLAS, MANFREDONIA VETRO (Gruppo Sangalli) or GES
Scaieni.
Fives Stein Ltd.
glasstec.01.04.01
Fives Stein Ltd.
Fives Stein is also a supplier of key process equipment for the major Chinese
glassmakers willing to improve their production and export quality glass products.
The quality and performance of our equipment are also acknowledged by recurrent orders from the float glass industry leaders:
NSG/Pilkington,
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.05
Gas equipment and supply systems
glasstec.01.04.06
Regenerative systems
Guardian Industries,
Saint Gobain,
Asahi Glaverbel
A Complete range of services
glasstec.01.04.08
Electrically heated systems
glasstec.01.04.09.02
Combustion technology for oxygen heating systems
glasstec.01.04.13
Feeder colouring
glasstec.01.06.01
Gob feeder
© 2010 Messe Düsseldorf GmbH
199
Fives Stein is also in position to adapt its scope of supply and services to best
suit the needs of your float glass plant project, from the supply of separate equipment to a plant-wide design and complete supply, including services such as the
training of your production personnel in existing float plants and plant operation
assistance.
© 2010 Messe Düsseldorf GmbH
200
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Alloys for glass industry castings
Fonderie Bartalesi S.r.l.
Address
Via Tevere, 1
53036 Poggibonsi / Siena
Italy
Phone
+39 0577 936669
Fax
+39 0577 982221
Internet address
www.fonderiebartalesi.com
E-Mail
info@fonderiebartalesi.com
Stand
Hall 13, A11 (Page 540)
Product Overview
FONDERIE VALDELSANE S.p.A.
Fonderie Bartalesi S.r.l.
glasstec.01.06.13
Moulds for glass production
glasstec.01.12.01
Hot end coating
Product Details
glasstec.01.06.13
Bronze semifinished and finished neck rings
Fonderie Bartalesi S.r.l.
Address
Strada di Gabbricce, 6
53035 Monteriggioni / SI
Italy
Phone
+39 0577 304730
Fax
+39 0577 304755
Internet address
www.fonderievaldelsane.com
E-Mail
com@fonderievaldelsane.com
Stand
Hall 13, B05 (Page 540)
Moulds for glass production
Alloys for glass industry castings
Product Overview
Bronze semifinished and finished neck rings
© 2010 Messe Düsseldorf GmbH
glasstec.01.06.13
201
FONDERIE VALDELSANE S.p.A.
Moulds for glass production
© 2010 Messe Düsseldorf GmbH
202
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.06.13
FONDERIE VALDELSANE S.p.A.
FOR G, s.r.o.
Moulds for glass production
Address
Teplická 129
419 01 Duchcov
Czech Republic
Phone
+420 417 835372
k250 LAMINAR GRAPHITE
Estabilished as a reference in the costruction of mould
and accessorys. The laminar microstructure of it has
been conceived for having the ability of the qickest thermic dispose,supported also from a vast choice in terms
of chemicol composition.
Fax
+420 417 835373
The peculiarity of it is very aimed for needs of hight
speed in production.
Internet address
www.forg.eu
k250 LAMINAR GRAPHITE
E-Mail
info@forg.eu
Stand
Hall 13, E21 (Page 540)
Estabilished as a reference in the costruction of mould
and accessorys. The laminar microstructure of it has
been conceived for having the ability of the qickest thermic dispose,supported also from a vast choice in terms
of chemicol composition.
Product Overview
The peculiarity of it is very aimed for needs of hight
speed in production.
© 2010 Messe Düsseldorf GmbH
203
FOR G, s.r.o.
glasstec.01.04.01
Batch charging technology
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.08
Electrically heated systems
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.05
Warehouse technology
glasstec.01.13.06
Glass racks for transport and warehouse
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
© 2010 Messe Düsseldorf GmbH
204
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.02.04
Forming and bending technology
glasstec.02.11.01
Tools
glasstec.02.11.02
Replacement and spare parts
Forma Glas GmbH
Address
Salzburger Str. 1
5145 Neukirchen
Austria
Phone
+43 7729 20299
Fax
+43 7729 20290
Internet address
www.formaglass.com
E-Mail
r.bernroitner@formaglass.com
- Standardized Inloader platform (for Inloader truck trailers)
Stand
Hall 13, B33 (Page 540)
- Carrying capacity of 28 500 kg
Product Overview
- Minimization of glass losses during transport and manipulation
glasstec.01.06.01
Gob feeder
- Modification of the stand in accordance with the customer’s requirements
glasstec.01.06.02
Ball feeder
Stands, Platforms and Pallet Systems for Transport and Stora
glasstec.01.06.04
Bar feeder
glasstec.01.06.06
Blowing machines
glasstec.01.06.07
Press machines
glasstec.01.06.13
Moulds for glass production
glasstec.01.06.14
Flash welding and fire polishing machines
Product Details
glasstec.01.13.02
FOR G, s.r.o.
Transport and handling systems
Inloader Stands
- A / L stands for transport and storage of flat glass of
the PLF size
We produce and deliver equipment for transport and storage of glass. Primarily,
we focus on steel stands (stillages), platforms and pallet systems for storage and
truck transport of large-size flat glass (with the possibility of additional usage for
railway transport or for shipping). We are a certified supplier of the Glaverbel
Group.
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
Glass Conveyors and Positioning
Forma Glas GmbH
The solution of transfer, manipulation and positioning of the glass is usually a
part of our projects, especially in connection with the automation of the automotive glass production. We also possess experience of completion of flat glass
conveyors (float, patterned glass, etc.), or of individual solutions of the automotive glass manipulation and positioning.
© 2010 Messe Düsseldorf GmbH
205
© 2010 Messe Düsseldorf GmbH
206
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.01.13.02
Transport and handling systems
glasstec.05.02.01
MRP machine and transport adjustment
glasstec.06
Contracting, consulting, engineering, services
Product Details
glasstec.01.06.06
Franke Industrieofen-Service GmbH
Forma Glas GmbH
Blowing machines
Blasmaschine IBS
Der im Bild gezeigte Maschinen-Typ kann in verschiedenen
Modifikationen mit 10 bis 24 Stationen zur Herstellung von
Kelchgläsern, Bechern, Glühlampenkolben, Laborartikeln,
Thermoskannen und anderen im Blasverfahren herzustellenden Glasartikeln gebaut werden. Die im RotationsBlasverfahren arbeitenden Maschinen können auch mit einer
Festblasvorrichtung ausgestattet werden.
Address
Friedewald, Goethestr. 2
01468 Moritzburg
Germany
Phone
+49 351 7956559-0
Fax
+49 351 7956559-99
Internet address
www.franke-ios.de
E-Mail
office@franke-ios.de
Stand
Hall 13, B88 (Page 540)
Product Overview
glasstec.01.04.03
Mit einem Spezialequipment ist auch eine Produktion von
Kelchgläsern mit gezogenem Stiel (in Zusammenarbeit mit einer Ausziehmaschine) möglich.
Smelting technology for tank furnaces
Product Details
glasstec.01.04.03
Blasmaschine IBS
Franke Industrieofen-Service GmbH
Franke Industrieofen-Service GmbH
Smelting technology for tank furnaces
Commissioning, inspections, FEM, bottom corrosion sensor
Der im Bild gezeigte Maschinen-Typ kann in verschiedenen
Modifikationen mit 10 bis 24 Stationen zur Herstellung von
Kelchgläsern, Bechern, Glühlampenkolben, Laborartikeln,
Thermoskannen und anderen im Blasverfahren herzustellenden Glasartikeln gebaut werden. Die im RotationsBlasverfahren arbeitenden Maschinen können auch mit einer
Festblasvorrichtung ausgestattet werden.
Mit einem Spezialequipment ist auch eine Produktion von
Kelchgläsern mit gezogenem Stiel (in Zusammenarbeit mit einer Ausziehmaschine) möglich.
Bottom corrosion sensor FIOSens® for glas melting furnaces Permanent grid monitoring of the furnace bottom with ceramic sensor plates within the base layer
Alert for glass contact at the sensor plates in the isolation layer before glass break through and with position
specification in the control unit Installation while general repair
Commissioning: Visualization of the temperature distribution within the furnace
and regulation of the start-up burners depending on the temperature field Reduction of CO or NOx emissions to a minimum by modified start-up burners
Inspektions: Endoscopy in the furnace interior Infrared-thermography-inspection
© 2010 Messe Düsseldorf GmbH
207
© 2010 Messe Düsseldorf GmbH
208
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
for bassin and top High-temperature-thermography in the furnace interior to visualize temperature distribution while operation Diagnostics/analytics for refractory
concrete, glas and emissions Inspections of glas processing units
FTW Werner Würth GmbH
Address
Am Rottland 2
58540 Meinerzhagen
Germany
Phone
+49 2354 701115
Commissioning, inspections, FEM, bottom corrosion sensor
Fax
+49 2354 701110
Bottom corrosion sensor FIOSens® for glas melting furnaces Permanent grid monitoring of the furnace bottom with ceramic sensor plates within the base layer
Alert for glass contact at the sensor plates in the isolation layer before glass break through and with position
specification in the control unit Installation while general repair
Internet address
www.wuerth-meinerzhagen.de
E-Mail
info@wuerth-meinerzhagen.de
Stand
Hall 14, A27 (Page 548)
FEM-Modelling for furnace components: Predictions for temperature and stress
distribution as well as for thermical strain in the refractory material Calculation
of heat losses for varied lining
Commissioning: Visualization of the temperature distribution within the furnace
and regulation of the start-up burners depending on the temperature field Reduction of CO or NOx emissions to a minimum by modified start-up burners
Inspektions: Endoscopy in the furnace interior Infrared-thermography-inspection
for bassin and top High-temperature-thermography in the furnace interior to visualize temperature distribution while operation Diagnostics/analytics for refractory
concrete, glas and emissions Inspections of glas processing units
FEM-Modelling for furnace components: Predictions for temperature and stress
distribution as well as for thermical strain in the refractory material Calculation
of heat losses for varied lining
© 2010 Messe Düsseldorf GmbH
209
Product Overview
FTW Werner Würth GmbH
glasstec.01.06.07
Press machines
glasstec.01.09.01
Transport systems
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.01.09.05
Pre-heating furnaces
glasstec.01.10.02
Cullet transportation
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.03
Conveying, sorting and storage facilities
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
© 2010 Messe Düsseldorf GmbH
210
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
FTW Werner Würth GmbH
Product Overview
glasstec.01.09.01
Transport systems
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.01.09.04
Decorating lehrs
glasstec.01.09.05
Pre-heating furnaces
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
Fördergurte und Transportbänder
Wir liefern Fördergurte und Transportbänder für alle Förderbänder sämtlicher
Herrsteller.
Aufgrund der Vielfalt haben wir einige Beispiele in unserem Katalog aufgeführt.
Weitere Ausführungen, wie andere Farben, andere Qualitäten, andere Oberflächen, sind ohne weiteres möglich.
Alle Abmessungen und Qualitäten können individuell nach Ihren Angaben gefertigt werden.
G-LEHRS
Address
G-LEHRS
Product Details
Molenstraat 37 b1
2220 Heist op den Berg
Belgium
Phone
+32 475 832875
Fax
+32 1576 2326
Internet address
www.lehrs.be
E-Mail
lehrs@skynet.be
Stand
Hall 14, D03 (Page 548)
glasstec.01.09.03
G-LEHRS
Annealing lehrs, continuous/intermittent operation
Annealing and Decorating Lehrs
Standard Features : Controlled by temperature-controllers
with an accuracy of 1º Celsius. Modular construction
facilitates installation and simplifies future expansion or
alteration. Each section has two major components :
the outside case and the inside tunnel, mounted totally
independent, isolated from each other with ceramic fibre insulation. A long lifetime thanks to the thickness and quality of the steel
and the rigid construction with U profiles. Inside tunnel in stainless steel, especially shaped to provide optimum air circulation. Extremely thick asbestos-free
ceramic fibre between the inside tunnel and the outside case makes the G-lehr
the best isolated lehr in the market. The hot air circulating fans (stainless steel)
are direct driven (no belt). Deflecting baffles for perfect hot air distribution. Fish
bone belt support in solid stainless steel. Inside return belt (Outside return on
demand). Belt min 5% chrome. Alarms for fans and burners gives high security. We guarantee perfectly welded and mounted lehrs, exact dimensions and a
flawless finish. Only the best materials are chosen, ABB motors, Siemens servomotors, SKF bearings. Simple construction - Low price - Low maintenance
Natural Gas and LPG heating :
Independent burners, each controlled by its own safety box and temperature
controller. Proportional or high-low-off control. Nozzle mix adaptable to all gas
© 2010 Messe Düsseldorf GmbH
211
© 2010 Messe Düsseldorf GmbH
212
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
pressures. 100 % safe, electronically controlled. Incoloy heat distributors. Peep
eye for flame control
vomotors, SKF bearings. Simple construction - Low price - Low maintenance
Electric heating :
Independent burners, each controlled by its own safety box and temperature
controller. Proportional or high-low-off control. Nozzle mix adaptable to all gas
pressures. 100 % safe, electronically controlled. Incoloy heat distributors. Peep
eye for flame control
Nichrome 80/20 Heating elements. Controlled : On/Off or proportional with
thyristors. Newest high temperature resistant ceramic supports for heating elements. High temperature resistant connections between the heating elements
and the power supply. Long lifetime.
Process Control :
Supervises all G-LEHRS equipment by computer. Possibility to control non-GLEHRS equipment. Extremely easy to use. Runs under Windows NT, 2000 and
XP. Possibility to change the production settings on the controllers in the lehr
panel or via the computer. Security : Changing settings on the controllers in the
lehr panel, can be disabled via the computer.
Belt Traction : A powerful motor with electronic speed control, fully protected,
gives a wide range of belt velocity, in the safest conditions. The simple mechanical construction makes belt tension and belt tracking adjustment very easy, as
well in mounting as in process. Belt is driven over a very large contact surface.
The drive roller is rubberised, has a diameter of 500 mm and the belt makes
contact over more than 270 degrees.
Annealing and Decorating Lehrs
Standard Features : Controlled by temperature-controllers
with an accuracy of 1º Celsius. Modular construction
facilitates installation and simplifies future expansion or
alteration. Each section has two major components :
the outside case and the inside tunnel, mounted totally
independent, isolated from each other with ceramic fibre insulation. A long lifetime thanks to the thickness and quality of the steel
and the rigid construction with U profiles. Inside tunnel in stainless steel, especially shaped to provide optimum air circulation. Extremely thick asbestos-free
ceramic fibre between the inside tunnel and the outside case makes the G-lehr
the best isolated lehr in the market. The hot air circulating fans (stainless steel)
are direct driven (no belt). Deflecting baffles for perfect hot air distribution. Fish
bone belt support in solid stainless steel. Inside return belt (Outside return on
demand). Belt min 5% chrome. Alarms for fans and burners gives high security. We guarantee perfectly welded and mounted lehrs, exact dimensions and a
flawless finish. Only the best materials are chosen, ABB motors, Siemens ser-
© 2010 Messe Düsseldorf GmbH
213
Natural Gas and LPG heating :
Electric heating :
Nichrome 80/20 Heating elements. Controlled : On/Off or proportional with
thyristors. Newest high temperature resistant ceramic supports for heating elements. High temperature resistant connections between the heating elements
and the power supply. Long lifetime.
Process Control :
Supervises all G-LEHRS equipment by computer. Possibility to control non-GLEHRS equipment. Extremely easy to use. Runs under Windows NT, 2000 and
XP. Possibility to change the production settings on the controllers in the lehr
panel or via the computer. Security : Changing settings on the controllers in the
lehr panel, can be disabled via the computer.
Belt Traction : A powerful motor with electronic speed control, fully protected,
gives a wide range of belt velocity, in the safest conditions. The simple mechanical construction makes belt tension and belt tracking adjustment very easy, as
well in mounting as in process. Belt is driven over a very large contact surface.
The drive roller is rubberised, has a diameter of 500 mm and the belt makes
contact over more than 270 degrees.
glasstec.01.09.04
Decorating lehrs
Standard Features
# Controlled by temperature-controllers with an accuracy of 1º Celsius. # Modular construction facilitates installation and simplifies future expansion or alteration. # Each section has two major components : the outside case and the inside tunnel, mounted totally independent, isolated from each other with ceramic
fibre insulation. # A long lifetime thanks to the thickness and quality of the steel
and the rigid construction with U profiles. # Inside tunnel in stainless steel, especially shaped to provide optimum air circulation. # Extremely thick asbestos-free
ceramic fibre between the inside tunnel and the outside case makes the G-lehr
the best isolated lehr in the market. # The hot air circulating fans (stainless steel)
are direct driven (no belt). # Deflecting baffles for perfect hot air distribution. #
© 2010 Messe Düsseldorf GmbH
214
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Fish bone belt support in solid stainless steel. # Inside return belt (Outside return
on demand). # Belt min 5% chrome. # Alarms for fans and burners gives high
security. # We guarantee perfectly welded and mounted lehrs, exact dimensions and a flawless finish. # Only the best materials are chosen, ABB motors,
Siemens servomotors, SKF bearings. # Simple construction - Low price - Low
maintenance
glasstec.01.09.05
Product Overview
Gedevelop AB
glasstec.01.06.01
Gob feeder
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.01.08.01
Glass wool technology
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
glasstec.02.13.02
Software
glasstec.03.06.01
Glass and mineral fibres (general)
glasstec.05.01.01.01
Measurement and control of glass position detection
glasstec.05.01.01.04
Measurement and control of glass thickness
glasstec.05.01.01.05
Measurement and control of glass temperature
glasstec.05.01.01.06
Measurement and control of speed
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
glasstec.05.01.05
Control and automation technology
Pre-heating furnaces
Mould Pre-heating Kiln
Gas direct or indirect firing. Electric heating. Oil heating. Air convection. Automatic temperature control. Complete stainless steel construction. Standard
sizes 1-2-3-4 m² / all other sizes available. Doors 1-2 or 3. These ovens can be
used for annealing and decorating. Easy programmable for an equivalent of a
16 section lehr. Simple construction - Low price - Low maintenance
Mould Pre-heating Kiln
Gas direct or indirect firing. Electric heating. Oil heating. Air convection. Automatic temperature control. Complete stainless steel construction. Standard
sizes 1-2-3-4 m² / all other sizes available. Doors 1-2 or 3. These ovens can be
used for annealing and decorating. Easy programmable for an equivalent of a
16 section lehr. Simple construction - Low price - Low maintenance
Gedevelop AB
Address
Florettgatan 27A
254 67 Helsingborg
Sweden
Phone
+46 42 386670
Fax
+46 42 201686
Internet address
www.gedevelop.com
E-Mail
info@gedevelop.com
Stand
Hall 12, C48 (Page 538)
© 2010 Messe Düsseldorf GmbH
215
© 2010 Messe Düsseldorf GmbH
216
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.08.01
Gedevelop AB
Glass wool technology
glasstec.01.13.09
Glass Fiberizing and Wool Industry
George Lane & Sons Ltd
Bannerley Road, Garretts Green
B33 0SL Birmingham
United Kingdom
Phone
+44 121 7845525
Fax
+44 121 7836988
Internet address
www.georgelane.co.uk
E-Mail
info@georgelane.co.uk
Stand
Hall 14, C02 (Page 548)
George Lane & Sons Ltd
Parts for conveying, transport, packing and warehouse
technology
Furnace Belts
All over the world manufacturers in the glass fiberizing
and wool industry are interested to increase the quality of their products. The GFM system works without
contact with the glass and data can be collected in real
time and used immediately for optimum control of the
manufacturing process. This gives lower costs for raw material and shortens
downtime in production, which in turn gives higher productivity and increased
profitability.
Address
Product Details
Heat Treatment Furnace Manufacturers
Giancarlo Perego S.p.A.
Address
Via Marchesina, 58
20090 Trezzano Sul Naviglio / Milano
Italy
Phone
+39 02 48400060
Fax
+39 02 4453300
Internet address
www.gperego.it
E-Mail
gperego@gperego.it
Stand
Hall 13, D61 (Page 540)
Product Overview
glasstec.01.06.13
Giancarlo Perego S.p.A.
Moulds for glass production
Product Details
Product Overview
glasstec.01.13.09
George Lane & Sons Ltd
Parts for conveying, transport, packing and warehouse
technology
© 2010 Messe Düsseldorf GmbH
217
glasstec.01.06.13
Giancarlo Perego S.p.A.
Moulds for glass production
Moulds for direct press
Through a unique and personal process of cold deformation, the G.Perego S.p.A.
construct moulds for direct pres production technology for every shape and design.
© 2010 Messe Düsseldorf GmbH
218
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
By using cold deformation technology we obtain moulds at competitive costs with
a superficial hardness increased of 20-30% of the one of the original material.
glasstec.01.06.07
Press machines
It is possible to use any type of steel obtaining therefore moulds with advanced
life compared to the standard, minor maintenance, constant thermal dissipation,
and conferring to the final product a considerable brightness.. It is advised to
give attention to the three enclosed diagrams stating the increase of the hardness to the glass contact area and the compactness of the metallurgical structure
due to the pressure.
glasstec.01.06.08
Press-blow-machines
glasstec.01.06.14
Flash welding and fire polishing machines
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.01.09.02
Stacker systems
glasstec.01.13.02
Transport and handling systems
glasstec.02.05.01
Laser-isolating technology
glasstec.03.05.05
Foam glass
glasstec.05.03.04
Process control systems
GLAMACO Maschinenbau GmbH
Address
Phone
Prasseweg 1
01640 Coswig
Germany
+49 3523 646-0
Fax
+49 3523 646-28
Internet address
www.glamaco.com
Product Details
E-Mail
info@glamaco.com
Stand
Hall 14, E10 (Page 548)
glasstec.01.06.04
GLAMACO Maschinenbau GmbH
Bar feeder
NC-feeder
NC-feeder for rotation blowing machine with electronic control,
Product Overview
glasstec.01.06.01
consist of:
GLAMACO Maschinenbau GmbH
Gob feeder
glasstec.01.06.04
Bar feeder
glasstec.01.06.05
Shear blades
glasstec.01.06.06
Blowing machines
* Plunger mechanism with computer controlled servo drive * Shears with computer controlled servo drive * Stroke device for plunger change * Feeder bowl
including orifice ring taking up and flap * Complete control cabinet incl. PCcontrol
The NC-feeder are designed special for use on rotating blow machines and run
successful in this production range. Plunger and shears are moved by servo
motor drives with up to date control electronics. Both units, plunger mechanism
and shears are assembled on the supplied feeder bowl. Interface to the furnace
supplier is the flange of the feeder bowl.
glasstec.01.06.05
Shear blades
Feeder
NC-feeder for rotation blowing machine with electronic control,
© 2010 Messe Düsseldorf GmbH
219
© 2010 Messe Düsseldorf GmbH
220
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
consist of:
* Plunger mechanism with computer controlled servo drive * Shears with computer controlled servo drive * Stroke device for plunger change * Feeder bowl
including orifice ring taking up and flap * Complete control cabinet incl. PCcontrol
The NC-feeder are designed special for use on rotating blow machines and run
successful in this production range. Plunger and shears are moved by servo
motor drives with up to date control electronics. Both units, plunger mechanism
and shears are assembled on the supplied feeder bowl. Interface to the furnace
supplier is the flange of the feeder bowl.
Technical data
* Drop weight 150 – 1.200 g (depend on glass and temp.) * Number of cuts 5
– 50 cycles/min (mechanical guarantee) * Plunger stroke 0 – 200 mm * Plunger
stroke position 0 – 350 mm * Bowl radius 335 mm * Central lubrification exist
rotating tube are made by a hand wheel. (The deliveries encloses a stroke unit
for change of revolving tube and plunger.)
NC-Feeder Control
The feeder control are made by an industrial PC system. This control ensures
a reliable, operator friendly and accurate repeating operation of the feeder. The
control are made menudriven on the computer display: Plunger stroke and
plunger stroke position are feed digital into computer display into the operator table of the machine. The required plunger curve (plunger movement run,
way-time-curve) can be requested from the memory on the computer display
(monitor) or can be changed direct with the mouse on the display according the
technological requirements. Also the movement curve of the shears arms could
be requested from the memory on the monitor or could be changed with the
mouse.
glasstec.01.06.06
Blowing machines
Plunger mechanism
blowing machine RBM 16/180
The plunger stroke drive were guide vertical by a recirculating ball – slide system
and moved with a ball thread drive. A servo motor without gear carried out the
drive of the ball thread movement. A computer controlled the stroke movement
according the known plunger curves, at the same time the plunger curve could
be graphic varied.
Glass blowing machine RBM 16/180, developed by GLAMACO Maschinenbau
GmbH, based company’s 48-year experience in glass technology and machine
construction. GLAMACO blowing machines are appreciated for their reliability,
performance, high productivity and cost-effective operation.
Shears drive
Capable of producing a wide range of quality products (tumblers, coffee pots,
bowls, vases, hard glass lamp bulbs, lab ware)
The angular shears are opened and closed about two coupler bars which are
mount on a recirculating ball slide. The drive of the recirculating ball slide are
made by a crank drive, which operates from the servo motor with planetary gear
train. The computer controlled the shears crank drive by a servo motor, so that
any knife speeds could be reached, which can be graphic varied too over a
monitor.
The recirculating ball slides consist of two parts, which were divide from each
other by a pneumatic cylinder. In case of stone inclusions within the drops etc.
both slide parts were pressed into each other and prevent so the shears and
drive mechanic destruction. Further the control of the pneumatic cylinder are
changed by power failure and the shears are opened by each crank position of
the drive.
The shears is vertical adjustable, further are adjustable the knife over cut and
the knife initial tension. The shears knifes of the shears are sprayed from top
within the opened position. The spray pulse is adjustable by the computer.
Characteristics of the blowing machine RBM 16/180
Extremely precise and uniform dimensions
High production efficiency and continuous trouble-free operation
Simple and quick job change
Easy operation and maintenance – economical operating costs
The machine consist of
Gob loading system
Machine turret with 16 blow stations
Blow station with divided working tables
Single motor drive system for working table rotation
Unloader KWA-4 for taking out the articles with moil
Control with synchronization to other equipment
Rotating tube mechanism
The rotating tube has a frequency controlled motor. The high adjustment of the
© 2010 Messe Düsseldorf GmbH
221
© 2010 Messe Düsseldorf GmbH
222
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
blowing machine RBM 16/180
The machine consist of
Glass blowing machine RBM 16/180, developed by GLAMACO Maschinenbau
GmbH, based company’s 48-year experience in glass technology and machine
construction. GLAMACO blowing machines are appreciated for their reliability,
performance, high productivity and cost-effective operation.
* Gob loading system * Machine turret with 16 blow stations * Blow station with
divided working tables * Single motor drive system for working table rotation *
Unloader KWA-4 for taking out the articles with moil * Control with synchronization to other equipment
Characteristics of the blowing machine RBM 16/180
Capable of producing a wide range of quality products (tumblers, coffee pots,
bowls, vases, hard glass lamp bulbs, lab ware)
Extremely precise and uniform dimensions
glasstec.01.06.14
Flash welding and fire polishing machines
Fire Polishing Machines
The fire polishing machine and the rim melting machine
are two types of machine with similar in the basic structure. Due to the technological function there are differences particularly in the choice and layout of the burners and their control. Special handling systems provide
the feeding and take off.
High production efficiency and continuous trouble-free operation
Simple and quick job change
Easy operation and maintenance – economical operating costs
The machine consist of
The fire polishing machine has been intended for fire polishing as an additional
surface refinement for moulded glass ware and high value crystal glass.
Gob loading system
Machine turret with 16 blow stations
The rim melting machine is used for melting the fin at the product edge resulting
from glass pressing.
Blow station with divided working tables
Single motor drive system for working table rotation
Unloader KWA-4 for taking out the articles with moil
glasstec.01.09.02
Control with synchronization to other equipment
Screw Charger
glasstec.01.06.08
For special glass processes GLAMACO deliver also screw chargers for batch
and cullet, called batch chargers. In various forms, these systems are in successful and reliable use in some glassworks in the whole world still today. Our
systems distinguish by a long lifetime, reliability, simple method of construction
and a well controllable function for glass depth level precision up to 0.2 mm. The
range of capacity of our machines reaches from 1 to 100 ton per day.
Press-blow-machines
Blowing Machines
Glass blowing machine RBM 16/180, developed by
GLAMACO Maschinenbau GmbH, based company’s
48-year experience in glass technology and machine
construction. GLAMACO blowing machines are appreciated for their reliability, performance, high productivity
and cost-effective operation.
Preferred application fields are production of water glass, TV glass and different types of fiber glass, glass wool and something similar. Our screw chargers
distinguished by the fact that they are absolutely closed against furnace atmosphere.
Characteristics of the blowing machine RBM 16/180
Screw Charger
* Capable of producing a wide range of quality products (tumblers, coffee pots,
bowls, vases, hard glass lamp bulbs, lab ware) * Extremely precise and uniform
dimensions * High production efficiency and continuous trouble-free operation *
Simple and quick job change * Easy operation and maintenance – economical
operating costs
© 2010 Messe Düsseldorf GmbH
Stacker systems
223
For special glass processes GLAMACO deliver also screw chargers for batch
and cullet, called batch chargers. In various forms, these systems are in successful and reliable use in some glassworks in the whole world still today. Our
systems distinguish by a long lifetime, reliability, simple method of construction
and a well controllable function for glass depth level precision up to 0.2 mm. The
range of capacity of our machines reaches from 1 to 100 ton per day.
© 2010 Messe Düsseldorf GmbH
224
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Preferred application fields are production of water glass, TV glass and different types of fiber glass, glass wool and something similar. Our screw chargers
distinguished by the fact that they are absolutely closed against furnace atmosphere.
glasstec.01.13.02
Portal charger
Electrical lehr loader
Pneumatic lehr loader
Transport and handling systems
Transport and Handling Systems
For our production lines for technical hollow ware we deliver all necessary equipment to handle the hot glass and to connect all glass machines:
Glashüttentechnik-Glasofenbau
Address
Hofweg 20
97737 Gemünden
Germany
Phone
+49 9351 9720-0
Fax
+49 9351 9720-88
Internet address
www.grob-glass.de
E-Mail
info@grob-glass.de
Stand
Hall 13, B78 (Page 540)
Take out for blowing machines
Taking out and turning over device KWA 4
Conveying systems
Transport conveyor belts
Inclined conveyors
Conveying systems with cooling boxes
Corner transfer systems
Transfer systems between conveyors
Push bar stackers
Portal charger
Electrical lehr loader
Pneumatic lehr loader
Product Overview
Transport and Handling Systems
For our production lines for technical hollow ware we deliver all necessary equipment to handle the hot glass and to connect all glass machines:
Take out for blowing machines
Taking out and turning over device KWA 4
Glashüttentechnik-Glasofenbau
glasstec.01.04.02
Forehearth technology
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.05
Gas equipment and supply systems
glasstec.01.04.06
Regenerative systems
Conveying systems
Transport conveyor belts
Inclined conveyors
Conveying systems with cooling boxes
Corner transfer systems
Transfer systems between conveyors
Push bar stackers
© 2010 Messe Düsseldorf GmbH
225
© 2010 Messe Düsseldorf GmbH
226
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.04.07
Recuperative systems
Grob-Vorherdsysteme
glasstec.01.04.08
Electrically heated systems
Grob-Vorherdsysteme, nach neuestem technischen
Stand, für homogenen Glastransport bei maximaler
Wirtschaftlichkeit.
glasstec.01.04.10
NOx control technology
glasstec.01.04.13
Feeder colouring
glasstec.06
Contracting, consulting, engineering, services
Product Details
glasstec.01.04.02
GLASMA AB
Glashüttentechnik-Glasofenbau
Grob-Vorherdsysteme, nach neuestem technischen Stand, für homogenen Glastransport bei maximaler Wirtschaftlichkeit.
GROB- U-Flammenwannen für höchste Glasqualität und Energieeffizienz
+46 471 48150
Fax
+46 471 33391
Internet address
www.glasma.se
E-Mail
info@glasma.se
Stand
Hall 14, B23 (Page 548)
Gas equipment and supply systems
Gas-Brennluft-Aufbereitungsstation für Feeder
glasstec.01.04.13
Phone
Smelting technology for tank furnaces
GROB- U-Flammenwannen
glasstec.01.04.05
Langgatan 22
361 31 Emmaboda
Sweden
Forehearth technology
Grob-Vorherdsysteme
glasstec.01.04.03
Address
Feeder colouring
Grob-Färbefeedersysteme
Product Overview
Grob-Färbefeedersysteme für hohe Farbqualität auch
bei hohen Durchsätzen.
glasstec.01.01
GLASMA AB
Raw material for glass production
Product Details
glasstec.01.01
Grob-Versorgungsstationen
Grob-Versorgungsstationen für homogene
Luftgemische für optimale Beheizung.
© 2010 Messe Düsseldorf GmbH
GLASMA AB
Raw material for glass production
GLASMA standard products
Gas-
Since the start of the Company in 1979 a significant number of high quality
GLASMA standard products have been developed. Today we supply a wide
range of pelletized lead free crystal, lead crystal and other glass making products to glassworks and studios all over the world.
227
© 2010 Messe Düsseldorf GmbH
228
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
GLASMA standard products
Since the start of the Company in 1979 a significant number of high quality
GLASMA standard products have been developed. Today we supply a wide
range of pelletized lead free crystal, lead crystal and other glass making products to glassworks and studios all over the world.
Glass Service Inc.
Address
Phone
Rokytnice 60
755 01 Vsetin
Czech Republic
glasstec.01.04.05
Gas equipment and supply systems
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
glasstec.01.04.09.02
Combustion technology for oxygen heating systems
glasstec.05.03.02
Inspection, protocolling and diagnostic systems
glasstec.05.03.04
Process control systems
glasstec.06
Contracting, consulting, engineering, services
+420 571 498511
Product Details
Fax
+420 571 498599
Internet address
www.gsl.cz
E-Mail
info@gsl.cz
Stand
Hall 15, C03 (Page 552)
glasstec.01.02.04
Glass Service Inc.
Laboratory equipment
Laboratory Redox Measurement by GS Rapidox II
Using GS RAPIDOX II TM
Reduces wasteIncreases the use of recycled culletFilters dustLowers environmental contaminationOptimizes fining processesMinimizes changeover timesDecreases energy consumption
By means of
Rapid measurement of oxygen activity (Redox)
Product Overview
Glass Service Inc.
glasstec.01.01
Raw material for glass production
glasstec.01.02.04
Laboratory equipment
glasstec.01.04.03
Smelting technology for tank furnaces
With
Fast response times (less than 10 minutes)
Wide dynamic range (1-10-9 bar)
glasstec.01.04.04
High reproducibility (typical standard deviation 5mV at 1300°C)
Optimizing the production process
Glass melting in industrial furnaces is a complex process involving fusion of raw
materials, degassing of primary melts, homogenization, and conditioning.
Smelting technology for pot furnaces
Controlling combustion processes, optimizing energy consumption, and minimizing harmful emissions are essential, as today’s glass makers face everincreasing pressure from commercial and environmental standpoints.
Measuring oxygen activity, or redox state of batch raw materials and melts, pro-
© 2010 Messe Düsseldorf GmbH
229
© 2010 Messe Düsseldorf GmbH
230
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
vides valuable information regarding foaming and fining characteristics as well
as final product properties, particularly color.
Flexibility and reliability in operation
Using experience gained in over 30 years of design and supply of temperature
and gas sensors for the control of metal melts, Heraeus Electro-Nite has developed the Rapidox - a fast, accurate system for determining oxygen activity in
glass melts. The traditional Rapidox furnace has been recently upgraded to the
GS Rapidox II™. The integrated design of this newer system is well adapted
to the glass making research environment, as well as in the factory where it
provides information for optimum control of production processes.
A disposable oxygen sensor, combined with a Ni/NiO reference and an iridium
wire sealed in vitreous silica, results in a fast response and an interference-free
operation up to 1400°C.
TYPES OF ELECTRIC POT FURNACES
GS can deliver following types of electric pot furnaces: Singlepot furnaces ATEL (pot diameters 65 - 100 cm) Doublepot furnaces - ATEL (pot diameters
65 - 100 cm) Crucible singlepot furnaces - ART STUDIO (pot diameter 40 - 60
cm) Crucible doublepot furnaces - ART STUDIO (crucible diameter 40 - 50 cm)
Singlepot furnace with a feeder for the production of costume jewelry and rods
- CHATON Furnace for melting of glass cullets - HOBBY
Glass Technologies S.r.l.
Address
Via J. Massarenti, 9
29122 Piacenza
Italy
Samples are introduced in thermally shock resistant ceramic crucibles which are
rotated during the measuring procedure.
Phone
+39 0523 623058
This, together with rapid heating to a homogenization temperature (normally
1300°C) provides a close simulation of real furnace conditions.
Fax
+39 0523 609785
Typical measuring cycles including heating, homogenization and oxygen activity
are performed in less than two hours.
Internet address
www.glasstechnologies.it
E-Mail
info@glasstechnologies.it
Electric Pot Frunaces
Stand
Hall 13, A73 (Page 540)
The Engineering Department of GLASS SERVICE, INC. was established to develop and produce new small capacity electric pot furnaces to support environmentally friendly glass melting. Since 1992, when this division was started, GS
Engineering has made over 40 installations of these pots furnaces as a turn-key
deliveries.
Product Overview
A sensor combined with a Mo/MoO2 reference and an iridium wire sealed in
alumina ceramics can be used in temperatures up to 1650°C.
glasstec.01.04.04
Smelting technology for pot furnaces
Electric pot furnaces supplied by GS provide an economic and environmentally
friendly alternative to oil or gas fired small furnaces for many different types of
glass. Electric melting processes are especially suitable for high value production such as crystalline and lead crystal or in geographic regions where the use
of electric energy is favorable. GLASS SERVICE would be pleased to provide
you with its technology that gives you the following benefits:
TYPE OF GLASS
Glass Technologies S.r.l.
glasstec.01.04.01
Batch charging technology
glasstec.01.04.02
Forehearth technology
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.05
Gas equipment and supply systems
Soda lime glass Lead crystal Color glasses Others (the only exclusion is a glass
with a content of fluor such as opal)
© 2010 Messe Düsseldorf GmbH
231
© 2010 Messe Düsseldorf GmbH
232
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.04.06
Regenerative systems
glasstec.01.04.02
Forehearth technology
Schmelzofen
glasstec.01.04.07
Recuperative systems
glasstec.01.04.08
Electrically heated systems
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
glasstec.01.04.10
NOx control technology
glasstec.01.04.12
Processing of water cooling for cullet treatment
glasstec.01.04.13
Feeder colouring
High efficiency design suitable to guarantee the necessary draught for regenerative furnaces
glasstec.05.01.01.05
Measurement and control of glass temperature
Ejector nozzle made of high resistance stainless steel
glasstec.05.01.02.02
Measurement, control and inspection of gas
compounds
Self supporting metallic chimney
glasstec.01.04.05
Gas equipment and supply systems
Waste gases ejectors
Fan speed controlled by inverter
Venturi basement with protective refractory lining inside
glasstec.05.01.02.03
Measurement, control and inspection of gas-filling
levels
glasstec.05.03.04
Process control systems
glasstec.06
Contracting, consulting, engineering, services
glasstec.01.04.08
Electrically heated systems
Furnace heating up and tie rod adjustment
Very updated equipments to heat the furnace up to 1150° C
High hot air volume to heat uniformely all refractories in a short time
Product Details
glasstec.01.04.01
Computer controlled temperature rising as well as refractory expansion for an
accurate tie rod adjustment.
Glass Technologies S.r.l.
glasstec.01.04.10
Batch charging technology
batch plant GT ICS
Nox reduction by means of a new type of burner and furnace geometry and a
reduction in the quantity of dust present in the waste gases thanks to suitable
filtering systems
The control system is necessary in order to achieve the
best performances for what efficiency and reliability are
concerned
© 2010 Messe Düsseldorf GmbH
NOx control technology
Nox reduction
233
© 2010 Messe Düsseldorf GmbH
234
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.04.12
Processing of water cooling for cullet treatment
Product Details
Low water consumption
glasstec.01.02.03
A high efficency water recirculation system can be applied where factory water is not available. Drain over 12
t/h of molten glass is possible with low water consumption.
Von der Schmelzwanne bis zum Verladeterminal liefern wir Ihnen alle Schmiermittel, die Sie für die Behälterglasproduktion benötigen. GTI (zertifiziert nach
ISO 9001) ist schon lange bekannt als Pionier in der Forschung, Herstellung
und Weiterentwicklung von HiTech-Schmiermitteln unter spezieller Beachtung
von:
- Scheren- und Rinnenschmiermitteln - synth. Schmiermitteln für Heißendeqipment - Schwabbelmassen - Vorformbeschichtung - IS Maschinen-Oele - Hochtemperaturschmiermitteln
Mühlenkamp 31
22303 Hamburg
Germany
Trichter- und Rinnenschmiermitteln Glasol D
Trichter- und Rinnenschmiermitteln Glasol D ist ein durch Wärme härtendes 2Komponentenmaterial, das wie ein aufgeklebtes Trockenschmiermittel in verschiedenen Temperaturbereichen bei vielen Heißendanwendungen wirkt. Glasol
NESSAL WHITE Das sprühbare Rinnenschmiermittel GTI Nessal White ist eine
klare, nichttoxische Schmierflüssigkeit mit nur geringem Graphitanteil für alle
Anwendungen im Rinnenbereich
Phone
+49 40 7343567-0
Fax
+49 40 7343567-10
Internet address
www.glassgti.com
E-Mail
germany@glassgti.com
Stand
Hall 13, B21 (Page 540)
Product Overview
Lubricators and coolants
Schmiermittel für Behälterglasproduktion
Glass Technology International GmbH
Address
Glass Technology International GmbH
GLASSWORKS HOUNSELL LIMITED
Address
PARK LANE, HALESOWEN, WEST MIDLANDS
B16 9HX birmingham
United Kingdom
Phone
+44 1384 56-0666
Fax
+44 1384 56-1363
Internet address
www.glassworkshounsell.co.uk
E-Mail
sales@glassworkshounsell.co.uk
Stand
Hall 13, E47 (Page 540)
Glass Technology International GmbH
glasstec.01.01
Raw material for glass production
glasstec.01.02.03
Lubricators and coolants
glasstec.01.06.13
Moulds for glass production
glasstec.02.11.02
Replacement and spare parts
© 2010 Messe Düsseldorf GmbH
235
© 2010 Messe Düsseldorf GmbH
236
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Segmented screws (180°)
Product Overview
glasstec.01.04.01
GLASSWORKS HOUNSELL LIMITED
glasstec.01.04.01
Adaptable Specification to Customer Requirements
Batch charging technology
Product Details
Water Cooling for tube tip.
GLASSWORKS HOUNSELL LIMITED
STATIC CHARGER
Batch charging technology
STATIC CHARGER
MARK 3
The MARK III Oscillating Batch Charger is the most developed batch charger available. It is suitable for all
sizes and types of furnace. It’s design allows increased
flexibility as the OBC can be split leaving the Stationary
Water Box to seal the dog-house increasing efficiency
and reducing the risks of thermal shock.
The STATIC Charger is ruggedly built, simple to install
and cheap to maintain. Suitable for sealing a doghouse
on furnaces up to 200 TPD
Oscillating Batch Charger
-3 Water Cooled Sections
OSCILLATING BATCH CHARGER
-Water thermometers
The CONVENTIONAL Oscillating Batch Charger fits all
sizes and types of furnace. It is used to seal the furnace
and to obtain better batch distribution.
-AC or DC Motor
STANDARD FEATURES
SCREW CHARGER
X-Y CHARGER
SCREW CHARGER
X-Y CHARGER
Suitable for all sizes of furnaces, it is used mainly with
Oxy Fuel and when sealing the furnace is a top priority.
An X-Y/Boom Charger is suitable for all sizes and
shapes of electric furnaces it is capable of charging
between 1.5 tpd and 80 tpd and adaptable to the customer’s exact requirements
STANDARD FEATURES
Continuous hardened screw section.
(Constant or variable pitch)
Static Hopper.
Geared Motor with Torque Limiter.
Inverter.
Polyurethane Wheels
OPTIONS AVAILABLE
© 2010 Messe Düsseldorf GmbH
237
© 2010 Messe Düsseldorf GmbH
238
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Global Bottling
glasstec.01.13.09
Address
419 West Fork Dr.
76012 Arlington, TX
USA
Phone
+1 817 570-5353
Fax
+1 817 275-0834
Internet address
www.gbottling.com
E-Mail
info@gbottling.com
Stand
Hall 13, E55 (Page 540)
Company News
08/15/2010
Parts for conveying, transport, packing and warehouse
technology
Multifunctional Holders and Inserts
Global Bottling recognized the growing demand for the RYCONgb inserts and
multifunctional holding system with little or no maintenance. In designing this
holding system, we have a (patented) multifunctional wedge shape design with
stainless steel 17-4 material and integrated holding clips. Quick removal and
replacement of inserts is extremely easy and safe with our new loading device.
RYCONgb inserts do not thermally check the glass and is non-oxidizing.
Global Bottling VERIXgb for the glass handling industry is a new revolutionary high temperature polymer composite capable of sustaining temperatures up
to 1000F (530C.) Lower thermal conductivity with no thermal shock avoiding
checks and cracks in the hot glass plus low oil absorption improving component reliability are just a few of the benefits. Also, VERIXgb has increased wear
resistance for exteneded component life and lower manufacturing cost.
Global Bottling
As a result of being innovators in the marketplace, we’ve become an organization where innovation is paramount to our success.
Innovator In The Marketplace
Global Bottling continues to expand its technology in multifunctional holders
and inserts assemblies in order to meet our customers evolving needs and preferences. We currently offer more than ideas than an other company.
Go To s.a.
Address
Rue Champeau, 1
6061 Montignies-sur-Sambre
Belgium
Phone
+32 71 201770
Fax
+32 71 201779
Internet address
www.goto.be
E-Mail
info@goto.be
Stand
Hall 13, C14 (Page 540)
Global Bottling supports our customers by providing superior products and services of exceptional values which in turns help them gain competitive advantages in the glass industry.
We provide the highest quality product due to our highly skilled and dedicated
employees plus our state of the art and patented products and manufacturing
process.
Product Overview
glasstec.01.13.09
Global Bottling
Global Bottling
Parts for conveying, transport, packing and warehouse
technology
© 2010 Messe Düsseldorf GmbH
239
© 2010 Messe Düsseldorf GmbH
240
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
GPM-Glass Project Management and Used Equipment
Product Overview
Go To s.a.
Address
Rue des Journaliers, 3
7822 Ghislenghien
Belgium
Phone
+32 68 284620
R 7 Roirant Machines
Fax
+32 68 284615
We can re-condition your R7 Roirant machine, equipped in Single or Double
Gob, or supply completely re-manufactured Roirant machines according to your
requirements.
Internet address
www.gpmglass.com
We can also recondition the WW7 machine (a Russian copy of the R7 machine)
and bring it up to R7 standards and performances.
E-Mail
info@gpmglass.com
The R7 Roirant machine can be equipped with :
Stand
Hall 13, D77 (Page 540)
glasstec.01.06.12
Bottle and glass container machines
Product Details
glasstec.01.06.12
Go To s.a.
Bottle and glass container machines
Internal cooling and compressed air blowing.
Floating neck ring holders.
Product Overview
GPM-Glass Project Management and Used Equipment
L15 Electronic link equipment.
Installation of Roirant machines mostly demands very few modifications of surrounding equipment.
We offer technical assistance at the installation of the equipment, as well as
training for the local personnel.
glasstec.01.06.12
Bottle and glass container machines
glasstec.06
Contracting, consulting, engineering, services
Product Details
glasstec.01.06.12
GPM-Glass Project Management and Used Equipment
Bottle and glass container machines
Forming machines
Used machines and equipments for production of container and tableware glass
© 2010 Messe Düsseldorf GmbH
241
© 2010 Messe Düsseldorf GmbH
242
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Typen: 81 - 115 - 503 - 515 in den Ausführungen Standard, Hochgeschwindigkeit
und
GPS Glasproduktions-Service GmbH
Address
servo-elektrisch
Ruhrglasstr. 50
45329 Essen
Germany
Ausgleichszonen: 81 - 510 - Sonderausführungen
Feederköpfe: 81 Standard - 81 Tief - 503 - 515
Drehrohr: 503 - 515 für 7” - 8” - 10” - 12”
Phone
+49 201 3600771
Fax
+49 201 3600737
Internet address
www.gps-essen.de
E-Mail
info@gps-essen.de
Stand
Hall 13, A12 (Page 540)
Elektrische Tonrohrhöhenverstellung
Feederscheren der Typen 81 - 503 und
Parallelscheren
Product Overview
IS-Maschinen :
Neufertigung und Generalüberholung
Verfügbar in den Mittenabständen : 4¼” - 5” - 5½” - 6” - 6¼” (Doppeltropfen), 3”
- 4” - 4¼” (Dreifachtropfen)
Maschinengrössen: 4 bis 12 Stationen (auf einem Maschinenbett) 2x6 Stationen
Tandem, 2x8 Stationen Tandem
GPS Glasproduktions-Service GmbH
Zubehör / Optionen:
Servo-Tropfenverteiler in allen Mittenabständen
glasstec.01.06.01
Gob feeder
glasstec.01.06.05
Shear blades
glasstec.01.06.06
Blowing machines
glasstec.01.06.08
Press-blow-machines
glasstec.01.06.12
Bottle and glass container machines
glasstec.06
Contracting, consulting, engineering, services
Rinnenaufnahmesystem
Pressdruckregelanlagen
Zweikreispegelkühlungssysteme
CCH-Transportbänder
Servo-Abstreifersysteme
AMC Maschinenantriebssysteme
Elektronische Steuerung TS2000
Austauschmechanismen
Ersatzteile
Ausrüstungsteile
Product Details
glasstec.01.06.01
GPS Glasproduktions-Service GmbH
Rinnenausrüstungen,
Hülsenzylindereinsätze,
Gob feeder
Plunger
Vorform- und Fertigformhalter,
Feeder:
Blaskopf-,
© 2010 Messe Düsseldorf GmbH
243
© 2010 Messe Düsseldorf GmbH
244
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Vorformboden-,
Product Details
Trichter- und Greiferarme, etc.
glasstec.01.10.05
Wirtschaftsglas-Maschinen:
GRAFIX GmbH
Separator applying machines
Glasbestäubungsanlagen
Pressblasmaschinen, Aggregate und Sonder-
Laufgeschwindigkeit: 1-2 m/s Mittlere Höhe über Fußboden: 900
mm Breite: 1300 mm (Autoglas) bis 4600 mm Es können verschiedene Pudersorten verwendet werden
maschinen zur Herstellung von Trinkgläsern.
GRAFIX GmbH
Address
Kupferstr. 40-46
70565 Stuttgart
Germany
Phone
+49 711 7869-0
Fax
+49 711 7869-252
Internet address
www.grafix-online.de
E-Mail
info@grafix-online.de
Stand
Hall 15, E22 (Page 552)
Product Overview
glasstec.01.10.05
Grafotec Spray Systems GmbH
Address
Keimstr. 7 A
86420 Diedorf
Germany
Phone
+49 821 90699-0
Fax
+49 821 90699-10
Internet address
www.grafotec.com
E-Mail
info@grafotec.com
Stand
Hall 15, D41 (Page 552)
GRAFIX GmbH
Separator applying machines
© 2010 Messe Düsseldorf GmbH
245
© 2010 Messe Düsseldorf GmbH
246
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Company News
05/26/2010
Grafotec Spray Systems GmbH
For more than 25 years, Grafotec Spray Systems GmbH has been a worldleading manufacturer of separator application systems for the protection of flat,
float and auto glass. Its flexible machine constructions and the process safety
of its equipment boosted the Bavarian company to become a global first point
of contact. At the end of 2007 the company extended its portfolio by a special
car glass applicator, which allows for the coating of windscreens prior to gravity
bending. With its special powder application system AP 510 SOLAR the company has placed an additional focus on the solar sector since the end 2009.
Liquid corrosion protection for the glass industry
The Liquid Application System LA 1000 from Grafotec Spray
Systems GmbH provides for a uniform corrosion protection
of float glass. The Bavarian company is the only vendor
worldwide to offer such a nozzleless process.
The protection against glass corrosion is an important quality
aspect in the glass industry. The addition of aluminum oxide
or zirconium oxide during the production efficiently reduces
the glasses’ proneness to corrosion. This process, however,
is very expensive. An alternative is the application of liquid
corrosion protection prior to the further processing of glass.
05/26/2010
Nozzleless application of corrosion protection To this end the Grafotec has conceived its Liquid Application System LA 1000, which allows for a nozzleless application of liquid corrosion protection. With approx. 6000 turns per minute, its
special rotor principle with integrated high-speed roller produces a spray mist,
which is applied to the glass surface through an adjustable opening. This creates a highly uniform film of corrosion protection.
Managing director Reinhold Senft explains: “Nozzle systems are prone to deposits; if individual nozzles get blocked or fail, this changes the complete spray
result – up to the formation of lines without corrosion protection. With our nozzleless process this won’t happen“. Another benefit of the LA 1000 is its application
width. Here again, the Grafotec Spray Systems GmbH demonstrates its flexibility: “Our Liquid Application system offers an application width of up to 5700
mm. Also tailored solutions from 6 meters on are possible thanks to its modular
construction“, explains Reinhold Senft.
The control system integrated into Grafotec’s LA 1000 allows for a fine adjustment of the application solution and thickness up to a few percents and/or micrometers, and thus provides for a constant high quality standard. But the system does not only control the repeatability of the application volume – through
the automatic adjustment to the glass width and track speed it also saves corrosion protection solution. A special reverse osmosis device guarantees the required quality of the process water. Its standard enclosure ensures a clean and
trouble-free workplace and simultaneously complies with all applicable safety
regulations.
Not only for corrosion protection The LA 1000 is not only restricted to the application of liquid corrosion protection. Reinhold Senft explains: “Our internal test
procedures demonstrated that also other current liquids or suspensions can be
© 2010 Messe Düsseldorf GmbH
applied to different flat materials“.
247
AP 550 – the introductory model among separating
agent application systems
In the shape of the introductory model AP 550 from its wellknown AP series, the Bavarian company Grafotec Spray Systems GmbH is once again demonstrating flexibility and innovative potential in the field of separating agent application in
the glass industry.
Highly specialised production lines in the float glass and flat
glass sector usually require neither special functions nor special productions for protection of their glass. These devices
are however rare and usually result in an impasse in the development of an existing production line. Grafotec Spray Systems GmbH is showing an innovative
way out in the form of its new AP system.
Simple construction with tried and trusted quality The powder application device
of the new AP system is optimised in its delivery condition for basic protection
of float glass and flat glass and can be readily integrated in existing production
lines – also owing to the space-saving design. Its interior workings consist of
the customary user-friendly control electronics. Its metering unit is identical to
that of the AP series. The patented nozzle system is also structurally identical to
the tried and trusted series and allows application of all common commercially
available separating agents in powder form for the float glass and flat glass field.
Unlike its big brothers, the AP 550 is limited to a nozzle beam with a maximum
of 24 nozzles and a maximum width of 4200 millimetres and is supplied with only
one metering unit module with a 15-litre powder reservoir.
Flexibly adaptable owing to modular construction As with all AP systems from
Grafotec Spray Systems GmbH, the introductory model AP 550 can be adapted
to the specific requirements of the production line. Extension of the control electronics, housing or an aspiration unit is also possible with the AP 550. “Our introductory model is not limited to one functionality”, the managing director Reinhold
© 2010 Messe Düsseldorf GmbH
248
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Senft emphasises. “It can be adapted to customers’ wishes – also without exchanging the entire unit – in the same manner as in a modular system. The AP
550 is therefore by no means an impasse. Instead, it offers our customers a financially acceptable and high quality introduction to the protection of float glass
and flat glass”.
nozzles of the AP 510 SOLAR system can be customized to every production
line. Areas off the glass sheets are consequently left open. Thus AP 510 SOLAR provides for consistent powder application as well as savings of separator.
In addition its Low Pressure System arranges for a clean working environment
avoiding the “rebounce effect”.
At an introductory price of approx. 19,500 EUR, the AP 550 has been delivered
internationally since the beginning of January. Further information about the AP
550 and all other systems from Grafotec Spray Systems GmbH can be found at:
www.grafotec.com
Groundbreaking, modular, and cost-effective On delivery AP 510 SOLAR is tailored to the particular needs of solar glass production and is available at a basic
price of approx. EUR 15,000,–. As every Grafotec AP system AP 510 SOLAR
is structured modularly and easily and cost-effectively is matched to changing
production preconditions. Application module enclosure or DustExtraction are
only two of numerous extensions, which Grafotec provides for the AP 510 SOLAR. To find the appropriate extension system contact the professional Grafotec
Spray Systems consulting team.
05/26/2010
AP 510 SOLAR – the new generation of application
systems “made in Bavaria”
Production lines for the manufacture of solar glass are not liable to permanent ongoing changes of requirements. Width
of glass, separator and separator dosing do not change frequently – as it is usual for common production lines. Separator
application systems for the production of solar glass often are
equipped with technical features, which rarely are necessary
for conventional glass productions. The changeover costs or
the costs for an individual adaption often are in the same manner as the machine’s original purchase price.
08/11/2010
Reduce investment costs and preserve resources With its new AP 510 SOLAR
Grafotec Spray Systems GmbH is introducing a trendsetting solution. For more
than 25 years the Bavarian company is known for the high quality and reliability
of its separator application systems. All Grafotec systems blend perfectly into
every existing flat, float or car glass production lines and are qualified for the
application of a wide spectrum of separators. The long lasting know-how and the
appreciation for customer requests prompted Grafotec Spray Systems GmbH to
do an up-to-date new product design with the focus on reduction of investment
costs and savings of resources.
Optimized for solar glass coating AP 510 SOLAR is the consistent further development of Grafotec’s AP systems. Robust, reliable and process-stable: the AP
510 SOLAR system stands for an almost maintenance-free uninterrupted permanent operation in every solar glass production line. With an application width
up to 2,500 millimeters and up to eight patent-registered spray nozzles the application of all conventional, powdery separators for solar glass production is
permitted. The especially designed microprocessor control in combination with
the well-known injection and distributor modules of the AP 900 series enable
high repetition accuracy and ultimate precise separator dosing. Due to the established easy to handle control system glass widths and the number of spray
© 2010 Messe Düsseldorf GmbH
249
Grafotec Spray Systems GmbH is presenting itself at
the glasstec 2010 in Düsseldorf
Diedorf, August 2010 – between 28th September and 1st
October 2010, the glass sector’s most important leading
trade fair will be taking place in the form of the glasstec.
Grafotec Spray Systems GmbH, the foremost manufacturer
of separating agent application systems, will also be appearing this year with pioneering products.
Just as in Cairo and Singapore already, Grafotec will be
providing information in Düsseldorf about the latest developments in separating agent application. Topics such as
low investment costs, a clean working environment and dealing responsibility
with resources will occupy a forefront position. The glasstec 2010 is therefore
an important trade fair for the new generation of separating agent application
systems “Made in Bavaria”.
Grafotec will therefore be exhibiting a modular system with the new series AP
550 and 510 which has been tailored to the requirements of specialised production lines in the float glass and flat glass area – such as in solar glass production
for example. The new generation of application systems possesses the basic
functions for uniform powder application and consequently makes it possible to
reduce investment costs. The reduction in the running costs is brought about by
the special application process that saves up to 30% in separating agents.
With the LA 1000, the Bavarian manufacturer displays that it also has the right
answer to questions about the topic of “Corrosion Protection for Glass”. Grafotec
has developed a roller system specifically for liquid corrosion protection that
applies an even film to the glass surface by atomised spray. The company is
© 2010 Messe Düsseldorf GmbH
250
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
the only supplier in the world to rely on a jetless application process.
The Managing Director, Reinhold Senft, awaits interesting trade fair days. “With
the glasstec, a successful trade fair year is coming to an end in Düsseldorf. I am
looking forward to the international professional public and discussion of specific
problem solutions – and very especially to new contacts”.
From Sept 28– Oct 1, 2010 we present our product line at the 20th glasstec in
Düsseldorf. You will find us in Hall 15, Stand D41. Further information about the
company and its products can be found at www.grafotec.com
its technical department in January 2010. “We wish to be able to react even
more specifically and rapidly to such requests in the future”.
The innovative interaction between tried and trusted units and new configurations will also continue to be the main focus of Grafotec Spray Systems GmbH.
This wealth of experience not only offers Grafotec’s customers maximum product safety, but also advantages in terms of finance and time.
Product Overview
05/26/2010
Redundant separating agent application system from
Grafotec
Grafotec Spray Systems GmbH, the leading manufacturer of
separating agent application systems for protection of float
glass and flat glass, is ensuring additional product safety.
Hence, a production line stoppage is avoided by simultaneous use of two AP 550 systems.
The equipment of the AP 550 entry-level model from Grafotec
Spray Systems GmbH is specifically tailored to the float and
flat glass industry. Owing to its modular construction, it allows simple and economically priced extensions at any time.
Grafotec has now provided proof of this major flexibility in Egypt.
Grafotec Spray Systems GmbH
glasstec.01.10.05
Separator applying machines
glasstec.02.11.08.05
Chemical protection material for glass
glasstec.02.11.08.07
Other chemicals
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
Product Details
The Bavarian manufacturer developed at the customer’s request a redundant
unit that prevents overall failure of the production line. Two AP 550 systems are
employed independently from one another in this case, which take over the duties of the other in case of malfunction or maintenance. “What is special about
the entire unit is the completely uninterrupted switchover between the individual devices”, the managing director, Reinhold Senft, explains. A programmable
logic controller (PLC) takes charge of this special task. It sends messages to
the central control point and was specifically developed for this unit.
glasstec.01.10.05
Grafotec Spray Systems GmbH
Separator applying machines
AGA 1000 Auto Glass Applicator for perfect windshields
AP 900 Advanced Powdersprayer for Autoglas
The redundant unit also offers further advantages. Whether 60/40 per cent or
50/50 per cent run duration is involved: the running times of both devices can
also be controlled manually and their maintenance intervals can be adapted to
process sequences within the company.
Proof of innovative thinking “With the redundant system, we have once again
been able to prove the flexibility of our systems”, according to Reinhold Senft,
who emphasises: “our entire units are modularly constructed and can be assembled to form new units, like a construction kit”. It is precisely the individual
adaptation to specific requirements on a production line that is of major importance for the Bavarian company. Consequently, Grafotec expanded the staff of
© 2010 Messe Düsseldorf GmbH
251
© 2010 Messe Düsseldorf GmbH
252
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
AP 950 Advanced Powdersprayer for flatglass
Graphoidal Developments Ltd
AP 960 Advanced Powdersprayer for flatglass
DE 1000 Dust Extractor System for clean and safe
environment
Address
Broombank Road
S41 9QJ Chesterfield, Derbyshire
United Kingdom
Phone
+44 1246 266000
Fax
+44 1246 269269
Internet address
www.graphoidal.com
E-Mail
sales@graphoidal.com
Stand
Hall 13, D22 (Page 540)
Product Overview
LA 1000 Liquid Appliator System for liquid stain
protection
Graphoidal Developments Ltd
glasstec.01.02.03
Lubricators and coolants
glasstec.01.06.16
Spray Systems for gob forming
glasstec.01.12.02
Cold end coating
Product Details
glasstec.01.02.03
Mobile Applicator for flexible and manual application
Graphoidal Developments Ltd
Lubricators and coolants
Shear Spray Bars provide the most efficient method
of bla
Shear spray application is a small but critical part of the
glass forming process . By controlling the pressure and
flow of the air and the lubricating emulsion, Graphoidal
Shear Spraybars create a fine atomized mist , which
wets the shear blades very effectively and provides the
most efficient method of blade cooling.
A wide range of Spraybars is available to suit all types
of applications, including custom made configurations.
© 2010 Messe Düsseldorf GmbH
253
© 2010 Messe Düsseldorf GmbH
254
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Mounting assemblies are also available for arcuate and parallel shear mechanisms.
Grenzebach Maschinenbau GmbH
Address
Albanusstr. 1-3
86663 Asbach-Bäumenheim
Germany
Shear Spray Bars provide the most efficient method of blade cooling, latent heat
extraction through evaporation
Phone
+49 906 982-2000
Shear spray application is a small but critical part of the glass forming process
. By controlling the pressure and flow of the air and the lubricating emulsion,
Graphoidal Shear Spraybars create a fine atomized mist , which wets the shear
blades very effectively and provides the most efficient method of blade cooling.
Fax
+49 906 982-2108
Internet address
www.grenzebach.com
A wide range of Spraybars is available to suit all types of applications, including
custom made configurations.
E-Mail
info@grenzebach.com
Mounting assemblies are also available for arcuate and parallel shear mechanisms.
Stand
Hall 15, B42 (Page 552)
glasstec.01.06.16
Spray Systems for gob forming
Shear Spray Bars
glasstec.01.12.02
Cold end coating
Cold End Coating – Single-Axis System
Company News
A system which combines the benefits of microprocessor control with the convenience of quick job set-up and data retrieval.
08/16/2010
Adjustable spray cycle/return cycle speed
VIG - a window with wall insulation properties !
Optional Gun lift assembly for below finish spraying if required
Insulating glass windows by double-glazing, bonding
two glass panes with a gas-filled spacing, has been a
success story for the last 50 years. However, in 2012
the new European Energy Saving Regulation EnEV
2012 will come into force, demanding thermal insulation values which traditional double glazing will be unable to achieve. Not only our own regional authorities, but also the US Government, have approved regulations which will herald the end of double glazing
units, as we know them, by 2013.
Spray head is positioned precisely for between row spraying
Job set-up storage and retrieval for quick and easy job changes
Sprays in one direction, then returns to start position 32-bit process controller
and precision Stepper Motor Drive
Precision drive stepper motor
Between row spraying in one direction – below finish
Independent spray/return speed control
Grenzebach Maschinenbau GmbH
VIG - a window with wall insulation properties !
Upgradeable to twin-axis operation
As a solution, window makers already offer the familiar triple pane window which
can reduce energy loss below the new limit values. However, such heavy-weight
insulating glass panes with a thickness exceeding 3 cm over-complicate window installation and place high demands on window frames and window fittings.
Moreover, they add considerable weight to glass facades and are often a determining factor as to the viability of retrofitting existing buildings, for example.
Interconnecting cabling included
The use of krypton gas filling offers some improvement in triple pane design .
Touch-screen operator interface
Job set-up and save feature
Programmable in various languages
© 2010 Messe Düsseldorf GmbH
255
© 2010 Messe Düsseldorf GmbH
256
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
However, cost and environmental considerations make this impracticable on a
large scale. The metal coating on the inner glass side, limiting thermal radiation
to the outside or solar irradiation to the inside„ are only justified for cost optimization purposes. At best, this window pane can produce a U-value (formerly
K-value) of about 0.6, i.e. each square meter window surface just loses 0.6 watt
per degree K of inside/outside temperature difference. This is a good result but
still represents twice the value of an insulated exterior wall.
There is a better, visionary solution - VIG! This vacuum-insulated glass does not
require an insulating gas between the inner and outer pane, but relies on a void
– in reality - a vacuum. To prevent the atmospheric pressure from squeezing the
2 panes together, barely visible tiny spacers are placed in between. These new
window pane structures can theoretically achieve U-values of 0.2 and as such
match the efficiency of an excellently insulated exterior wall !
Considering that the vacuum requires just a few tenths of a millimeter spacing
between the panes, the slim VIG window is not half as thick and is overall lighter
and more stable than current double or triple pane glazing. The two panes,
squeezed under atmospheric pressure, and the spacers constitute a composite
structure making a glass pane thickness of just 2 mm possible, whilst achieving
the stability and sound insulation values of 4 mm glass.
The use of the thermos flask principle for windows is not a new idea, the first
VIG patent in Germany being granted in 1906. Since then, numerous attempts
have been made, world-wide to bond both panes in a way that, on the one hand,
allows a high 10-4 mbar inner vacuum to be maintained over a span of 20 years
or more, and, on the other hand, ensuring that the strain generated between
the inner and outer pane does not result in glass breakage. A few successful
solutions have merely satisfied a niche market as a substitute for single-glazed
small windows in Asian housings. The demanding requirements of Western
world markets however, have not been met - until now.
In 2004 Grenzebach, an engineering company with headquarters in AsbachBäumenheim (Hamlar), in the Donau-Ries region of Bavaria, sponsored by the
Department of Trade and Industry (BMWi) and assisted by the Project Management Organisation Jülich (PTJ), initiiated a new approach to this market demand
and launched the ProVIG research project (#0327419). Grenzebach, already
an established manufacturer of glass processing equipment, gathered around
some suppliers, an insulating glass manufacturer and a window maker, and
completed the project team with several Fraunhofer Institute affiliates and the
ZAE Bayern (Bavarian Center for Applied Energy Research).
and accurately positioned between the two panes. Next, a vacuum needed to
be generated in the inner spacing. This vacuum had to remain free of any contamination or moisture even after 20 years, requiring a vacuum with a maximum
of one millionth molecules in the air.
Grenzebach now have a demonstration line in operation.for panes measuring
about 1 m x 1 m. The experience gained is already projected into full scale industrial production with an annual capacity of 400,000 VIG. The aim is to offer
a VIG production line manufacturing panes of any desired size and able to withstand demanding inspection cycles and tests. It must also be marketable at a
fair market price.
The first 8.5 mm slim panes have an initial U-value of 0.5 and excellent noise
absorbing properties. The spacers are so inconspicuous that at 1 m distance
they are only visible in a freshly cleaned window when they are pointed out. .
The next generation with a mere overall thickness of 6.5 mm and still better R
values is already in process ...
‘Glass-technology-live’ is a special show during glasstec 2010, in Düsseldorf, It
is an excellent stage on which to showcase the first VIG results in September
2010. Product and process details will be presented in a gtl series of presentations on 29 September in the afternoon. Throughout the period of the trade fair
the special ’Glass-technology-live’ show will serve as platform for our VIG exhibits and demonstrate how our windows will look in a few years from now. VIG
window panes made of float glass and of tempered single-layer safety glass,
measuring 1 m x 1 m, and even 1800 mm high VIG will be exhibited along with
the new VIG ISO window pane. This combined dual-pane glazing consists of a
VIG and of a coated float glass pane. Achieving a U-value of 0.3 it is a worldbeater in solar protection for such composite structures. Its R values already
match those of an insulated exterior wall !
More and more window makers and architects world wide are asking the question: When can we buy this VIG ? This demand redoubles the determination of
the project team. Whereas inventors prefer step by step functionality optimization in a small scale line, Grenzebach insulation glass customers are impatient
for short-term annual production capacities producing millions of VIG sheets.
This incentive has encouraged further co-operation between Grenzebach and
its partners with the aim of starting up, in a joint effort, such VIG production lines
by 2012.
It will be interesting to see if an equally visionary innovation will be introduced
during ‘glasstec 2012’!
Bonding two glass sheets vacuum tight, not too rigidly while allowing durable
flexibility, was a real challenge. New materials had to be developed and new processing methods invented. Several thousands of tiny spacers had to be placed
© 2010 Messe Düsseldorf GmbH
257
© 2010 Messe Düsseldorf GmbH
258
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
07/27/2010
50 years Grenzebach Maschinenbau GmbH
08/18/2010
50 years Grenzebach Maschinenbau GmbH Staff representatives from all over the world hosted in Hamlar
Cutting Process Optimization in Float Glass Lines
Grenzebach Maschinenbau GmbH, the founding company of the Grenzebach Group, celebrated their 50year jubilee on July 9 when all members of staff were
invited to join the festivities in Hamlar.
In his address under the theme „Grenzebach: yesterday – today – tomorrow“ CEO Bernd Minning depicted the impressive development history of the former craftsman business that started off with just 7 employees in 1960. Today the Grenzebach group is a global player with a workforce
of 1500 spread over manufacturing locations in the three key currency regions
(dollar and euro as well as the Asian market) and with a worldwide network of
sales and service agencies.
Grenzebach’s product portfolio is clearly structured ,starting with the core business ”glass“ with equipment for basic glass, TFT glass and solar panel manufacturers., The group’s second major field of activity is the “building materials“
business supplying manufacturing lines for makers of gypsum plaster board and
insulation materials.. The “General Industry“sector focuses on intralogistics, on
airport baggage handling and on the automotive industry. Grenzebach provide
equipment for all of the these businesses, including a wraparound service package: from a basic screw to a spare parts kit as well as full-scale maintenance
services with up-to-the-minute software updates.
World wide service agencies are an essential part of the „Service“ strategy. They
ensure Grenzebach stays close to their customers and facilitate a quick and
proficient response to customer requests and needs.
There are four mainstays which reflect the Grenzebach philosophy: Grenzebach
serve strongly growing markets with a strong emphasis on automation and innovation. In all this Grenzebach excel in: • innovative technology and process
know how, • short implementation times, • top quality and high reliability, • and
– most importantly – highly skilled and extremely motivated staff.
This emphasis on internationality and professionalism does not deflect the Grenzebach family or the group companies from a strong commitment to social activities – especially in fostering schools and development of young people.
Hamlar, July 2010
© 2010 Messe Düsseldorf GmbH
Grenzebach - Cutting Process Optimization in Float
Glass Lines
259
Grenzebach is a longstanding supplier and development partner to glass manufacturers in need of process equipment, automation technology, specialized
cutting and handling systems as well as entire manufacturing lines and cold end equipment. Grenzebach
also engineers process technology and manufacturing
equipment for the photovoltaic and solar thermal industries.
For flat glass makers job-specific optimization and cutting plays a key role in
managing the cold end of a glass processing line. In fact, this high art of optimization directly affects the achievable peak glass yield.
A novel technical achievement (patent pending) strikes a new path to a significant yield increase in the float glass production business.
The assessment and qualification of non-conformities in the glass ribbon inevitably forces glass makers to score strips of faulty glass for elimination as
cullet. So far the shortest possible “cullet sheet” measured some 600 mm as
determined by the roller spacing of the downstream conveyors directing this cullet sheet to the next available drop and elimination section.
This minimum sheet length, seen over the full ribbon width, frequently embodied an avoidable glass loss especially when the particular glass defect situation
would allow a shorter cullet sheet.
The Grenzebach innovation now allows to reduce this 600 mm sheet to a mere
cullet strip of up to 170 mm and, subject to the detected defects, to minimize the
glass loss by up to 70 %.
Traditionally, the snapping station snaps the scored sheets with the main snapping roller. The snapping station raises this pneumatically actuated or motordriven roller pinpointed on the score passing the roller crest. In interaction with
the press roll assembly over the conveyor the glass snaps in a controlled way
due to flexure, sectioning the endless ribbon into individual sheets.
Depending on the job requirements, these sheets then directly go to the stackers
as jumbo sheets or are further cut up to smaller sized sheets. Faulty glass is traditionally snapped and conveyed to the next available cullet elimination point in
the very same way. However, the conventional float line roller spacing requires
a minimum 600 mm sheet for this. The now developed new snapping station
provides a moveable roller section that can open and close within a very short
time to create a discharge opening. This elimination sequence is initiated by the
© 2010 Messe Düsseldorf GmbH
260
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Grenzebach PPC optimization system and is then materialized by the conveyor
line control system. The new snapping station can now snap and directly eliminate a scheduled short cullet sheet through the roller segment opening. After
cullet strip elimination the conveyor rollers return to their original position and
resume their function as standard conveyor rollers for subsequent production.
The newly developed snapping station design also reflects numerous customer
demands. The top pressure roll assembly is now, for example, driven by servomotors and allows manifold roller position settings (leading or trailing offset or
accurate positioning over the glass ribbon). A novelty is the likewise integrated
upper snap roll. If necessary, this extra snap roll can snap the cullet strip with
a linear down-movement in a specific and adjustable angle of attack. This new
feature is to further improve the snapping results in particular situations such as
for thicker glass.
200 mm long reject sheets to cullet instead of the traditional 600 mm long reject
sheets. Ultrasonic welding of junction boxes and holders to solar modules as
well as welding holders for facade copings and fittings. What seemed to be out
of reach so far can now be done. Grenzebach developed a process for permanently bonding glass and metal without any adhesive. Edge decoating laser
for thin-film solar modules. Grenzebach proudly present a novel, vertical edge
decoating laser. This laser system allows to decoat all usual thin-film modules
and to effectively extract the removed particles. Non-contact flat glass and solar module gripper system: A novel gripper system for picking the glass from its
coated face without touching or damaging the coating. An air stream, generated
with ultrasound, sucks the glass and simultaneously builds up an air cushion that
prevents the gripper from touching the glass. Handling and accumulator technology for flat glass and thin-film solar lines with optional clean room capability.
An on-site operating terminal provides a variety of parameters for fine tuning
the machine performance. The Grenzebach PC-Panel visualization software
allows for the display and editing of all machine parameters from any operating
terminal.
Please visit us at Glasstec, Hall 15 Booth B42.
The newly developed snapping station is already employed on running projects
and will soon prove its yield increasing capacities.
Product Overview
Grenzebach Maschinenbau GmbH
glasstec.01.10.01
Optimization of glass cutting and glass production yield
glasstec.01.10.03
Inspection systems
Picture captions:
glasstec.01.10.04
Paper applying machines
Picture 2 shows the new reduced-length cullet strip snapping and on the spot
elimination through the snapping station discharge opening.
glasstec.01.10.06
Stacking machines
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
Grenzebach – the family owned company welcomes you at glasstec in Hall 15
B42 with the following exhibition focuses.
glasstec.02.01.01.01
Cutting technology for float glass
Discovering. Developing. Driving. Grenzebach goes 3D. Grenzebach is proud
to present a 3D film in their own cinema. Defect detection system for the endless
glass ribbon of float glass processing lines. This allows Grenzebach to undertake the entire quality assurance in a float glass processing plant. System for
eliminating ultra short reject sheets from a float glass processing line. This option particularly satisfies the needs of float glass plants mainly producing jumbo
and medium sizes. They can now rigorously minimize glass loss by eliminating
glasstec.02.01.04.01
Mechanical snapping devices
glasstec.02.05.01
Laser-isolating technology
glasstec.02.06.01
Vacuum coating equipment
Grenzebach is a global corporation with many years of experience in Flat Glass
Technology.
Please visit us at Glasstec, Hall 15 Booth B42.
08/22/2010
Grenzebach – the family owned company welcomes
you at glasstec in Hall 15 B42 with the following
exhibition focuses.
© 2010 Messe Düsseldorf GmbH
261
© 2010 Messe Düsseldorf GmbH
262
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.02.09.03
Foil treating technology (storing, climate, uncoiling)
glasstec.02.10.01
Washing machines and equipment
glasstec.05.01.01.04
Measurement and control of glass thickness
glasstec.05.01.01.06
Measurement and control of speed
glasstec.05.01.01.07
Measurement and control of glass tension
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
glasstec.05.02.01
MRP machine and transport adjustment
glasstec.05.02.02
CNC control for handling machines
glasstec.21.01
glass technology live
Product Details
glasstec.01.13.02
deletion of thin-film solar modules. Contact-free gripper system for flat glass and
solar modules. Handling and accumulator technology for flat glass and thin-film
solar lines with optimum clean room conditions.
Grenzebach Maschinenbau GmbH
Grenzebach Maschinenbau GmbH
Address
Albanusstr. 1-3
86663 Asbach-Bäumenheim
Germany
Phone
+49 906 982-2000
Fax
+49 906 982-2108
Internet address
www.grenzebach.com
E-Mail
info@grenzebach.com
Stand
Hall 11, B26 (Page 536)
Transport and handling systems
The prime tasks of an automation and transport line
Company News
From Cold End to warehouse - Grenzebach is the trendsetter for the flat glass industry. Measuring, classification, cutting, snapping, conveying and stacking: the
prime tasks of an automation and transport line. Grenzebach also takes over planning and entire automation
of any thin film plant. Our front and back end technology includes transport,
washing, cutting and stacking equipment, accumulators, robot handling, inspection systems, laser processing and various other equipment for the smooth treatment of the sensitive substrates. Grenzebach equipment meets the high requirements of production technology for LCD and TFT displays under clean room
standards.
08/22/2010
Exhibition focuses: defect detection system for the endless glass ribbon of float
glass equipment. Evacuation system for ultra-short defect panels on float glass
equipment, ultra-sonic welding of junction boxes and holders at solar modules
such as welding of holders for facade copings and fittings. System for laser edge
© 2010 Messe Düsseldorf GmbH
263
Grenzebach Maschinenbau GmbH
Grenzebach – the family owned company welcomes
you at glasstec in Hall 15 B42 with the following
exhibition focuses
Grenzebach – the family owned company welcomes you at glasstec in Hall 15
B42 with the following exhibition focuses.
Discovering. Developing. Driving. Grenzebach goes 3D. Grenzebach is proud
to present a 3D film in their own cinema. Defect detection system for the endless
glass ribbon of float glass processing lines. This allows Grenzebach to undertake the entire quality assurance in a float glass processing plant. System for
eliminating ultra short reject sheets from a float glass processing line. This option particularly satisfies the needs of float glass plants mainly producing jumbo
and medium sizes. They can now rigorously minimize glass loss by eliminating
200 mm long reject sheets to cullet instead of the traditional 600 mm long reject
sheets. Ultrasonic welding of junction boxes and holders to solar modules as
© 2010 Messe Düsseldorf GmbH
264
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
well as welding holders for facade copings and fittings. What seemed to be out
of reach so far can now be done. Grenzebach developed a process for permanently bonding glass and metal without any adhesive. Edge decoating laser
for thin-film solar modules. Grenzebach proudly present a novel, vertical edge
decoating laser. This laser system allows to decoat all usual thin-film modules
and to effectively extract the removed particles. Non-contact flat glass and solar module gripper system: A novel gripper system for picking the glass from its
coated face without touching or damaging the coating. An air stream, generated
with ultrasound, sucks the glass and simultaneously builds up an air cushion that
prevents the gripper from touching the glass. Handling and accumulator technology for flat glass and thin-film solar lines with optional clean room capability.
Please visit us at Glasstec, Hall 15 Booth B42.
07/27/2010
This emphasis on internationality and professionalism does not deflect the Grenzebach family or the group companies from a strong commitment to social activities – especially in fostering schools and development of young people.
Hamlar, July 2010
08/18/2010
Grenzebach - Cutting Process Optimization in Float
Glass Lines
Cutting Process Optimization in Float Glass Lines
50 years Grenzebach Maschinenbau GmbH
Grenzebach is a longstanding supplier and development partner to glass manufacturers in need of process equipment, automation technology, specialized
cutting and handling systems as well as entire manufacturing lines and cold end equipment. Grenzebach
also engineers process technology and manufacturing
equipment for the photovoltaic and solar thermal industries.
Staff representatives from all over the world hosted in
Hamlar
Grenzebach Maschinenbau GmbH, the founding company of the Grenzebach Group, celebrated their 50year jubilee on July 9 when all members of staff were
invited to join the festivities in Hamlar.
In his address under the theme „Grenzebach: yesterday – today – tomorrow“
CEO Bernd Minning depicted the impressive development history of the former
craftsman business that started off with just 7 employees in 1960. Today the
Grenzebach group is a global player with a workforce of 1500 spread over manufacturing locations in the three key currency regions (dollar and euro as well as
the Asian market) and with a worldwide network of sales and service agencies.
Grenzebach’s product portfolio is clearly structured ,starting with the core business ”glass“ with equipment for basic glass, TFT glass and solar panel manufacturers., The group’s second major field of activity is the “building materials“
business supplying manufacturing lines for makers of gypsum plaster board and
insulation materials.. The “General Industry“sector focuses on intralogistics, on
airport baggage handling and on the automotive industry. Grenzebach provide
equipment for all of the these businesses, including a wraparound service package: from a basic screw to a spare parts kit as well as full-scale maintenance
services with up-to-the-minute software updates.
World wide service agencies are an essential part of the „Service“ strategy. They
ensure Grenzebach stays close to their customers and facilitate a quick and
proficient response to customer requests and needs.
There are four mainstays which reflect the Grenzebach philosophy: Grenzebach
© 2010 Messe Düsseldorf GmbH
serve strongly growing markets with a strong emphasis on automation and innovation. In all this Grenzebach excel in: • innovative technology and process
know how, • short implementation times, • top quality and high reliability, • and
– most importantly – highly skilled and extremely motivated staff.
265
For flat glass makers job-specific optimization and cutting plays a key role in
managing the cold end of a glass processing line. In fact, this high art of optimization directly affects the achievable peak glass yield.
A novel technical achievement (patent pending) strikes a new path to a significant yield increase in the float glass production business.
The assessment and qualification of non-conformities in the glass ribbon inevitably forces glass makers to score strips of faulty glass for elimination as
cullet. So far the shortest possible “cullet sheet” measured some 600 mm as
determined by the roller spacing of the downstream conveyors directing this cullet sheet to the next available drop and elimination section.
This minimum sheet length, seen over the full ribbon width, frequently embodied an avoidable glass loss especially when the particular glass defect situation
would allow a shorter cullet sheet.
The Grenzebach innovation now allows to reduce this 600 mm sheet to a mere
cullet strip of up to 170 mm and, subject to the detected defects, to minimize the
glass loss by up to 70 %.
Traditionally, the snapping station snaps the scored sheets with the main snapping roller. The snapping station raises this pneumatically actuated or motordriven roller pinpointed on the score passing the roller crest. In interaction with
© 2010 Messe Düsseldorf GmbH
266
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
the press roll assembly over the conveyor the glass snaps in a controlled way
due to flexure, sectioning the endless ribbon into individual sheets.
Depending on the job requirements, these sheets then directly go to the stackers
as jumbo sheets or are further cut up to smaller sized sheets. Faulty glass is traditionally snapped and conveyed to the next available cullet elimination point in
the very same way. However, the conventional float line roller spacing requires
a minimum 600 mm sheet for this. The now developed new snapping station
provides a moveable roller section that can open and close within a very short
time to create a discharge opening. This elimination sequence is initiated by the
Grenzebach PPC optimization system and is then materialized by the conveyor
line control system. The new snapping station can now snap and directly eliminate a scheduled short cullet sheet through the roller segment opening. After
cullet strip elimination the conveyor rollers return to their original position and
resume their function as standard conveyor rollers for subsequent production.
The newly developed snapping station design also reflects numerous customer
demands. The top pressure roll assembly is now, for example, driven by servomotors and allows manifold roller position settings (leading or trailing offset or
accurate positioning over the glass ribbon). A novelty is the likewise integrated
upper snap roll. If necessary, this extra snap roll can snap the cullet strip with
a linear down-movement in a specific and adjustable angle of attack. This new
feature is to further improve the snapping results in particular situations such as
for thicker glass.
Product Overview
Grenzebach Maschinenbau GmbH
glasstec.01.10.01
Optimization of glass cutting and glass production yield
glasstec.01.10.03
Inspection systems
glasstec.01.10.04
Paper applying machines
glasstec.01.10.06
Stacking machines
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.02.01.01.01
Cutting technology for float glass
glasstec.02.01.04.01
Mechanical snapping devices
glasstec.02.05.01
Laser-isolating technology
glasstec.02.06.01
Vacuum coating equipment
glasstec.02.09.03
Foil treating technology (storing, climate, uncoiling)
glasstec.02.10.01
Washing machines and equipment
glasstec.05.01.01.04
Measurement and control of glass thickness
Picture captions:
glasstec.05.01.01.06
Measurement and control of speed
The Picture shows the new reduced-length cullet strip snapping and on the spot
elimination through the snapping station discharge opening.
glasstec.05.01.01.07
Measurement and control of glass tension
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
An on-site operating terminal provides a variety of parameters for fine tuning
the machine performance. The Grenzebach PC-Panel visualization software
allows for the display and editing of all machine parameters from any operating
terminal.
The newly developed snapping station is already employed on running projects
and will soon prove its yield increasing capacities.
Grenzebach is a global corporation with many years of experience in Flat Glass
Technology.
Please visit us at Glasstec, Hall 15 Booth B42.
© 2010 Messe Düsseldorf GmbH
267
© 2010 Messe Düsseldorf GmbH
268
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.05.02.01
MRP machine and transport adjustment
Product Details
glasstec.05.02.02
CNC control for handling machines
glasstec.01.13.01
glasstec.21.01
glass technology live
Hager Sondermaschinenbau GmbH
Feeding and stacking systems
Portalstapler am kalten Ende
Hager Sondermaschinenbau GmbH
Address
Weilerweg 5
86753 Möttingen
Germany
Phone
+49 9083 9696-0
Fax
+49 9083 9696-30
Internet address
www.hager-gmbh.de
E-Mail
sales@hager-gmbh.de
Stand
Hall 15, C51 (Page 552)
Product Overview
Heavydrive, Günter Übelacker Inh.
Hager Sondermaschinenbau GmbH
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
© 2010 Messe Düsseldorf GmbH
Address
Goethestr. 8 A
86609 Donauwörth
Germany
Phone
+49 906 1267008-0
Fax
+49 906 1267008-9
Internet address
www.heavydrive.com
E-Mail
sales@heavydrive.com
Stand
Hall 14, A23 (Page 548)
Product Overview
269
Heavydrive, Günter Übelacker Inh.
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.06
Glass racks for transport and warehouse
glasstec.01.13.07
Vehicles for glass transport
glasstec.01.13.08
Construction and glazing equipment
© 2010 Messe Düsseldorf GmbH
270
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.03.01.01
Float and mirror glass
glasstec.03.02.02.01
Laminated safety glass
glasstec.03.02.09
Curved glass
glasstec.03.08.01
Structural use of glass
glasstec.04.03
Handling tools, hand-guided
glasstec.06
Contracting, consulting, engineering, services
Product Overview
Product Details
glasstec.01.13.07
Heavydrive, Günter Übelacker Inh.
glasstec.01.10.06
Stacking machines
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.03
Conveying, sorting and storage facilities
glasstec.01.13.05
Warehouse technology
glasstec.01.13.06
Glass racks for transport and warehouse
glasstec.01.13.07
Vehicles for glass transport
glasstec.01.13.08
Construction and glazing equipment
glasstec.02.01.01.01
Cutting technology for float glass
glasstec.02.01.01.02
Cutting technology for laminated safety glass
glasstec.02.01.01.03
Cutting technology for technical glass
glasstec.02.01.03
Devices for coating removal
glasstec.02.01.04.01
Mechanical snapping devices
glasstec.02.01.04.02
Thermal snapping devices
glasstec.02.05.02
Laser-marking technology
Vehicles for glass transport
HDL 800
Glastransportwagen
HEGLA GmbH & Co. KG
Address
HEGLA GmbH & Co. KG
Industriestr. 21
37688 Beverungen
Germany
Phone
+49 5273 905-0
Fax
+49 5273 905-255
Internet address
www.hegla.de
E-Mail
info@hegla.de
Stand
Hall 15, D25 (Page 552)
© 2010 Messe Düsseldorf GmbH
271
© 2010 Messe Düsseldorf GmbH
272
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.10.06
HEGLA GmbH & Co. KG
glasstec.01.13.03
Conveying, sorting and storage facilities
SortJet
Stacking machines
Stacking Technology
glasstec.01.13.05
glasstec.01.13.01
Warehouse technology
KPL-F
Feeding and stacking systems
Loaders and Unloaders
glasstec.01.13.06
IFP 22 + TL 100
Tilting Table ART
glasstec.01.13.02
Glass racks for transport and warehouse
glasstec.01.13.07
Transport and handling systems
Glass Transporter
Harp rack
© 2010 Messe Düsseldorf GmbH
Vehicles for glass transport
273
© 2010 Messe Düsseldorf GmbH
274
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.13.08
Construction and glazing equipment
Product Details
Vacuum Lifting Devices
Henan Chief Way Industry Co., LTD.
glasstec.01.02.01
Refractory materials
Temperature hole brick
Used in the flame space for temperature measurement.
Henan Chief Way Industry Co., LTD.
Address
Shengdimiao, Chaohua Town
452385 Xinmi City, Henan
China (Rep.)
Phone
+86 371 63189856
Fax
+86 371 69237175
Internet address
Heye International GmbH
Address
Lohplatz 1
31683 Obernkirchen
Germany
www.chiefway.com.cn
Phone
+49 5724 26452
E-Mail
chiefway@chiefway.com.cn
Fax
+49 5724 26229
Stand
Hall 13, E72-5 (Page 540)
Internet address
www.heye-international.com
E-Mail
management@heye-international.com
Stand
Hall 14, C19 (Page 548)
Product Overview
glasstec.01.02.01
Henan Chief Way Industry Co., LTD.
Refractory materials
Company News
09/09/2010
Heye International GmbH
We listen!
How do you find out what your customers really want? You ask them.
Using a web based survey, Heye International has succeeded in evaluating
trends and challenges in the market and, at the same time, took the opportunity to get customer and partner opinions on their products and solutions.
© 2010 Messe Düsseldorf GmbH
275
© 2010 Messe Düsseldorf GmbH
276
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
More than 100 specifically invited participants – from various different areas of
expertise, including plant management, purchasing department, maintenance
department and production management – submitted their qualified feedback on
topics such as trends, threats and opportunities in the container glass industry.
As motivation, HI has donated for every filled-in questionnaire a certain amount
of money to UNICEF, in parallel to a prize draw for a hotel family week-end for
one of the participants.
The summary of the survey clearly suggests that energy costs and energy
awareness, as well as cost reduction and a higher demand on quality and product safety are the top trends to impact the business. Of course, these trends
bring major challenges with them straight away: reducing costs while improving
the product quality as well as the plant and energy efficiency will be the goals
for the future.
For Heye International, these results are a welcome endorsement of our long
term philosophy of striving to reduce costs through innovation and technological
advancement without in any way compromising quality or safety. We continue
to advance the container glass industry by introducing more advanced and more
flexible production facilities whose potential will enable significant cost savings
whilst maintaining the high standards on which we have built the Heye reputation.
09/09/2010
Start of a new NNPB production line in Australia
Amcor Glass is a successful and innovative manufacturer of container glass.
Servicing the wine industry of Australia and New Zealand, Amcor Glass currently
produces more than 1 million wine bottles a day. Located near the Barossa Valley north of Adelaide, the Amcor Glass Packaging plant commenced production
2002. The plant incorporates three of the largest dedicated Glass manufacturing
furnaces in the world.
In May 2002, Amcor’s G1 shop is producing 450 tons per day. G2 followed in
2004, adding 420 tons per day. Now G3 with another 450 tons per day sets the
standard again. The new NNPB production line combines 2 IS machines with 20
stations each. Heye International’s latest technology, such as Servo Invert, High
Speed Pusher or Simotion Servo Technology, is used at the Hot End. Together
with the high performance equipment at the Cold End, up to 800 bottles per
minute can be produced.
Amcor is determined to set a new standard in the production of lightweight bottles, with the help of Heye International as technology partner.
© 2010 Messe Düsseldorf GmbH
277
Product Overview
Heye International GmbH
glasstec.01.04.01
Batch charging technology
glasstec.01.04.02
Forehearth technology
glasstec.01.04.08
Electrically heated systems
glasstec.01.06.01
Gob feeder
glasstec.01.06.06
Blowing machines
glasstec.01.06.08
Press-blow-machines
glasstec.01.06.12
Bottle and glass container machines
glasstec.01.06.13
Moulds for glass production
glasstec.01.09.02
Stacker systems
glasstec.01.12.01
Hot end coating
glasstec.01.12.02
Cold end coating
glasstec.01.13.02
Transport and handling systems
glasstec.05.01.01.01
Measurement and control of glass position detection
glasstec.05.01.01.04
Measurement and control of glass thickness
glasstec.05.01.01.05
Measurement and control of glass temperature
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
© 2010 Messe Düsseldorf GmbH
278
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.05.01.05
Control and automation technology
glasstec.01.04.06
Regenerative systems
glasstec.05.02.01
MRP machine and transport adjustment
glasstec.01.04.07
Recuperative systems
glasstec.05.03.04
Process control systems
glasstec.01.04.08
Electrically heated systems
glasstec.06
Contracting, consulting, engineering, services
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
glasstec.01.04.09.02
Combustion technology for oxygen heating systems
glasstec.01.04.13
Feeder colouring
glasstec.01.09.05
Pre-heating furnaces
HORN Glass Industries AG
Address
Bergstr. 2
95703 Plößberg
Germany
Phone
+49 9636 9204-0
glasstec.01.12.01
Hot end coating
Fax
+49 9636 9204-10
glasstec.01.12.02
Cold end coating
Internet address
www.hornglas.de
glasstec.05.01.01.01
Measurement and control of glass position detection
E-Mail
info@hornglas.de
glasstec.05.01.01.05
Measurement and control of glass temperature
Stand
Hall 13, D23 (Page 540)
glasstec.05.03.04
Process control systems
glasstec.06
Contracting, consulting, engineering, services
Product Overview
HORN Glass Industries AG
glasstec.01.04.01
Batch charging technology
glasstec.01.04.02
Forehearth technology
Product Details
glasstec.01.04.01
HORN Glass Industries AG
Batch charging technology
to/d 16 - 20 l/min HVR 500 240 - 420 to/d 20 - 26 l/min
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.05
Gas equipment and supply systems
© 2010 Messe Düsseldorf GmbH
279
© 2010 Messe Düsseldorf GmbH
280
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Vibratory Charging Machine - HVR
glasstec.01.12.02
Application: for furnaces with a lateral doghouse for
demixed-free charging
Cold End Coating Unit
Construction: - water cooled adjustable paddle - vibration chute - charging belt - oscillating frame
Typ Einlegekapazität Kühlwasser ——————————————————–
HVR 300 30 - 120 to/d 12 - 16 l/min HVR 400 120 - 240
glasstec.01.04.02
HORN offers further ideal units for the even coating of the glass products at the
cold end with the possibility of individual adaption in terms of belt width due to
the unique construction method. However, after the unit is up and running our
service does not stop. We price ourselves on having a top after-sale service
even though our unit are all but maintenance-fee due to their linear design.
Cold end coating improves the mechanical as well as the handling properties
of the product, especially products with high surface gloss. In addtion to this, it
offers excellent surface protection.
Forehearth technology
Vorherde
Die Konditionierung des Glases und eine gute thermische Homogenität sind die
Voraussetzungen, die der Glashersteller an einen Vorherd stellt. HORN hat verschiedene Konzepte, die je nach Kundensituation zur Anwendung kommen.
glasstec.01.04.03
Cold end coating
Extras / Features:
- PLC control
- Non-electric dosing unit
- For use with any coating agent
Smelting technology for tank furnaces
Glass melting furnaces
HORN is your specialized partner for the production of container glass, crystal
glass, lead crystal glass, float glass and special glass. Depending from customer
requirements HORN presents different furnace consepts.
glasstec.01.12.01
Hotwork International AG
Address
Fabrikstr. 1g
8586 Erlen
Switzerland
Phone
+41 71 64920-90
Fax
+41 71 64920-99
Internet address
www.hotwork.ag
E-Mail
contact@hotwork.ag
Stand
Hall 13, A80 (Page 540)
Hot end coating
Hot End Coating Unit
Hot End Coating Unit
During production, transportation and filling of the glass container, micro-scratches
are generated on the surface which can lead to substantial weakening of the
overall glass structure. To minimise this problem a coating is applied. Smooth
coating and minimal use of coating agent are special features of this unit. To
underpin these features, prime-quality material such as stainless and carbon
steels, cold finished steel bars and seamless tubing ensure reliable operation
and a long lifespan.
Extras / Features:
- equal distribution of the coating agent
- stainless steel of all plates which are in contact with the coating agent
- constructed to any desired size
Product Overview
- for use with any coating agent
glasstec.01.04.09.01
© 2010 Messe Düsseldorf GmbH
281
Hotwork International AG
Combustion technology for oil and gas fired smelting
furnaces
© 2010 Messe Düsseldorf GmbH
282
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Hotwork International AG
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
Drink Bottles
Wine Bottles
Cosmetic Bottles
Medicine Bottles
Kammerazusschmelze
Lamp�vessel
Glass
Hubtex Maschinenbau GmbH & Co. KG
Address
Huanghua Economic Development Zone
061100 Hebei
China (Rep.)
Werner-von-Siemens-Str. 8
36041 Fulda
Germany
Phone
+49 661 8382-0
Phone
+86 317 5339917
Fax
+49 661 8382-120
Fax
+86 317 5230166
Internet address
www.hubtex.com
Internet address
www.rtmold.com
E-Mail
info@hubtex.com
E-Mail
sales@rtmold.com
Stand
Hall 15, E41 (Page 552)
Stand
Hall 13, D67 (Page 540)
Huanghua Rongtai Mould Co., Ltd.
Address
Product Overview
Product Overview
glasstec.01.06.13
Huanghua Rongtai Mould Co., Ltd.
Moulds for glass production
Product Details
glasstec.01.06.13
Huanghua Rongtai Mould Co., Ltd.
Moulds for glass production
Moulds
Hubtex Maschinenbau GmbH & Co. KG
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.05
Warehouse technology
glasstec.01.13.07
Vehicles for glass transport
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
Foodstuff Bottles
© 2010 Messe Düsseldorf GmbH
283
© 2010 Messe Düsseldorf GmbH
284
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.13.02
Hubtex Maschinenbau GmbH & Co. KG
Hydrogenics Europe NV
Transport and handling systems
Address
Nijverheidsstraat 48C
2260 Oevel
Belgium
Phone
+32 14 462110
Fax
+32 14 462111
Internet address
www.hydrogenics.com
E-Mail
hydrogensales@hydrogenics.com
Stand
Hall 12, D30 (Page 538)
Modell M 150 (1-Mann-Version)
HUBTEX Mehrwege-Seitenstapler können Glaspakete bis
zu 20 Tonnen transportieren. Die HUBTEX M-Serie benötigt
nur 1 Fahrer. Hier steht der Bediener auf einer Plattform
über dem Glas. Diese Bedienperson ist Fahrer und Einweiser zugleich. Vorteile bei dieser Ausführung sind optimal
freie Sicht nach allen Seiten beim Fahren und Manövrieren,
eine sichere Aufnahme der Glaspakete und geringere Personalkosten.
glasstec.01.13.07
Vehicles for glass transport
Elektro-Mehrwege-Seitenstapler,Modell MQ 60
Modell MQ 60 mit Klammervorrichtung zum Handling von 3 verpackten Glaspaketen, auf Wunsch
auch lieferbar für unverpacktes Glas und/oder mit 90°Drehvorrichtung.
Product Overview
glasstec.01.02.02
Hydrogenics Europe NV
Industrial gases
Product Details
GLASGESTELL-TRANSPORTER VON 8,0 BIS 33 TONNEN
glasstec.01.02.02
HUBTEX Glasgestell-Transporter werden in der Flachglasindustrie zum Transport von A- und L- Gestellen bis
33,0 to eingesetzt. Diese Transporter sind mit Elektro, Diesel- oder Gasantrieb erhältlich und können mit
Vulkollanrädern (PU) für den Innenbereich und/oder mit
Gummibereifung für den kombinierten Einsatz im Innen- und Außenbereich ausgerüstet werden. Die Aufnahme des Glasgestells erfolgt über synchrones Anheben des Chassis mit Hubschiene. Durch den speziellen Vertikalhub erfolgt
das Anheben des Gestells sicher und präzise, ohne Versatz. Die Glasscheiben
werden beim Transport durch vier hydraulische Sicherungen gehalten.
Hydrogenics Europe NV
Industrial gases
Hydrogen production using water electrolysis
With 60 years of hydrogen expertise and more than
1’000 references around the world, the Hydrogenics
Corporation is a leading global developer of clean hydrogen energy solutions ( www.hydrogenics.com ).
Our HySTAT™ hydrogen generator is available in 4 models, producing 10, 15,
30 or 60 Nm3/h of very pure hydrogen. Thanks to our proprietary IMET® pressurized water electrolysis technology and advanced automation, the hydrogen
© 2010 Messe Düsseldorf GmbH
285
© 2010 Messe Düsseldorf GmbH
286
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
is produced on demand in a safe and reliable way. With our modular technology we are able to deliver larger systems reaching capacities in excess of
500Nm3/hour.
HyGear BV
Address
Westervoortsedijk 73
6827 AV Arnhem
Netherlands
Phone
+31 26 3664019
Fax
+31 26 3629323
Internet address
www.hygear.nl
E-Mail
info@hygear.nl
Stand
Hall 14, E12 (Page 548)
Product Overview
glasstec.01.02.02
glasstec.01.02.02
Brunnweinbergstr. 19
71334 Waiblingen
Germany
Phone
+49 7151 4879770
Fax
+49 7151 275207
Internet address
www.ifg-glass.com
E-Mail
info@ifg-glass.com
Stand
Hall 15, E22 (Page 552)
09/08/2010
Industrial gases
HyGear BV
Industrial gases
HGS 5 -250 Nm3/h of hydrogen
HyGear offers standard products as well as specials, usually elaborated through
contract based development projects. The range of standard products for onsite hydrogen generation covering a range from 5 to 250 Nm 3 /h. Standard
systems use natural gas as fuel and deliver hydrogen with a purity of 99.999%
at a pressure of maximum 8 bar.
Hydrogen generators can be applied for supply of high purity hydrogen to industrial end-users for instance in the glass industry, metal industry, electronics
industry and food production
© 2010 Messe Düsseldorf GmbH
Address
Company News
HyGear BV
Product Details
IfG - Ingenieurbüro für Glastechnik GmbH
287
IfG - Ingenieurbüro für Glastechnik GmbH
Online Measuring Systems for powder quantity/glass
thickness and opacity
Ingenieurbüro für Glastechnik or IfG in short will be on
hand together with its cooperation partners to participate as exhibitors at the Glasstec for the 15th time
now. As specialist for solutions involving the application of separating agents, IfG has made a name for
itself worldwide and further established its global network of local partners and service technicians over the past few years.
This year’s exhibit at Glasstec focuses primarily on systems for identifying separating agents on glass. Together with its business partners Grafix GmbH
(Stuttgart) und ksl staubtechnik (Lauingen / Donau), IfG will unveil three new
products that were developed to monitor the application of separating agents.
In addition, the corporate alliance presents special sensors for opacity and color.
Overview of New Products for 2010:
- EPS Vision System If necessary, one to two cameras are used to check the application of separating agents and provide the user with feedback as to whether
the relevant prerequisites are fulfilled. “EPS vision system” is used, for instance,
© 2010 Messe Düsseldorf GmbH
288
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
in the production of windshields and can easily be integrated in all glass production and processing lines.
- EPS Powder Detection System The system is based on sensors that facilitate
the online monitoring of separating agents on glass. Depending on the application, 1 to 20 sensors can be used at the same time.
- IfG Opacity and Color Analyzer By combining a capable electronic measuring
system with an external light source, we have made it possible to measure both
the opacity and color value of products.
08/05/2010
IfG news on glasstec
At IfG the service life and reliability of our systems are
always at the forefront of our development and ensure
production reliability for our customers. Both the continual new development as
well as the modification and optimization of existing products are an integral part
of IfG’s philosophy. The technology implemented in powder spraying systems is
constantly being improved, and IfG always has new ideas for further optimizing
the customers’ standards and the quality of their products. The following technical changes and new developments of the past few years have proven their
worth in practical application:
EPS Economic Powdering System - EPS Eco Series – Introduction of a robust
and yet cost-effective line, which allows for the use of standard components of
tried and tested systems. - EPS-LP System (Low pressure) – the introduction
of this system was a resounding success: Since its unveiling at Glasstec 2006,
more than 160 systems of this type have been installed. - EPS Basic – this
system is especially suited for use in smaller formats as is common in the solar
energy segment, for instance. - Double EPS – for greater production reliability:
The systems have a redundant design of up to 95%, which means that there
are two of all essential components available should one fail. IfG customers
especially appreciate this in the float and coating lines with high production volumes or sensitive products. The highlight of the Double-EPS system is its ability
to handle two types of powders, which can be applied variably alternating from
glass to glass. - Ethernet interface as standard feature for all Single and Double EPS systems. - Automatic adjustment of width of powder spray – every
nozzle can be activated and deactivated individually. That saves on separating
agents when it comes to varying glass widths and decreases the soiling of the
roller bed. - Fluidization was revised completely – to ensure optimal metering
of critical powder types such as powders based on coconut shells or powders
with high acidity, and to assure reliability in production. - Low-maintenance Premium Pump – for safeguarding the supply of air to the EPS system, we utilize
optimized pumps that have a maintenance interval extended by 700%.
© 2010 Messe Düsseldorf GmbH
289
Powder Removal System - Contactless powder removal, e.g. in an offline cutting line upstream of the cutting process. Several systems have already been
installed in Germany, Czech Republic and Poland.
Take the opportunity to find out everything you need to know during your visit
to Glasstech: the entire IfG team is looking forward to meeting you at our stand
E22 in Hall 15.
IfG Ingenieurbüro für Glastechnik Gmbh Brunnweinbergstr. 19 71334 Waiblingen Tel 07151-4879770 Fax 07151-275207 Email info@ifg-glass.com www
www.ifg-glass.com
Product Overview
IfG - Ingenieurbüro für Glastechnik GmbH
glasstec.01.10.04
Paper applying machines
glasstec.01.10.05
Separator applying machines
glasstec.02.01.03
Devices for coating removal
glasstec.02.06.02
Enamel glass machines, screen printers, thermal
pressure equipment
glasstec.02.10.02
Brushing, high-pressure and ultrasonic systems
glasstec.02.11.08.05
Chemical protection material for glass
glasstec.02.11.08.07
Other chemicals
glasstec.02.14
Nanotechnology
glasstec.03.10.01.04.04Nano coating technology
glasstec.03.10.03.01.06.02
Coating of automotive glass
© 2010 Messe Düsseldorf GmbH
290
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.03.10.03.01.06.03
Coating of flat glas
ilis gmbh
glasstec.05.01.01.04
Measurement and control of glass thickness
glasstec.05.01.01.08
Measurement and control of glass colour
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
Product Details
glasstec.01.10.05
IfG - Ingenieurbüro für Glastechnik GmbH
Separator applying machines
EPS Economic Powdering System
EPS Economic Powdering System, world wide 600 installations in 37 countries, excellent powder homogeneity and adhesion of separating powder on the glass.
Address
Konrad-Zuse-Str. 12
91052 Erlangen
Germany
Phone
+49 9131 974779-0
Fax
+49 9131 974779-9
Internet address
www.ilis.de
E-Mail
info@ilis.de
Stand
Hall 13, C31 (Page 540)
Product Overview
ilis gmbh
EPS Powdering System for windscreens / windshiels
glasstec.01.03.11
Batch calculation and glass property prediction
EPS powder application system for powdering windscreens / windshields before the bending process.
glasstec.05.01.01.07
Measurement and control of glass tension
glasstec.05.01.01.08
Measurement and control of glass colour
Product Details
glasstec.01.03.11
ilis gmbh
Batch calculation and glass property prediction
BatchMaker: Quality is calculable
In view of rising raw material and energy costs, batch calculation has great economic importance in glass manufacture. This applies especially for the production of mass-produced products such as bottles or float glass.
Apart from the economic efficiency of the manufacturing process, the reliable
prediction of important glass properties and processing characteristics from the
composition of the glass is an important task of batch calculation.
BatchMaker Suite and BatchMaker Express provide the glass industry with stan-
© 2010 Messe Düsseldorf GmbH
291
© 2010 Messe Düsseldorf GmbH
292
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
dard solutions for simple and reliable calculation of batch recipes and glass properties.
Product Details
glasstec.01.10.03
Inspection systems
Eagle-i
Inspection Systems
Address
Inspection Systems
Dimension verification and defect detection system for
Unit 10, Rugby Park, Bletchley Road
SK4 3EJ Heaton Mersey
United Kingdom
flat glass.
Full conveyor coverage.
Main line, side legs, off line applications.
Phone
+44 161 94799113
Fax
Internet address
www.inspection-systems.co.uk
E-Mail
stephen@inspection-systems.co.uk
Stand
Hall 12, F25 (Page 538)
Product Overview
INTCO GmbH
Inspection Systems
glasstec.01.10.03
Inspection systems
glasstec.03.01.01
Float and mirror glass
glasstec.05.01.03
Measuring devices to be used on site
© 2010 Messe Düsseldorf GmbH
293
Address
Zur Drehscheibe 5
92637 Weiden
Germany
Phone
+49 9636 9249907
Fax
+49 9636 9249904
Internet address
www.intco.de
E-Mail
zentrale@intco.de
Stand
Hall 13, C94 (Page 540)
© 2010 Messe Düsseldorf GmbH
294
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Overview
INTCO GmbH
glasstec.01.02.01
Refractory materials
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.06
Regenerative systems
glasstec.01.04.07
Recuperative systems
glasstec.01.04.08
Electrically heated systems
Product Details
glasstec.01.02.01
INTERGLASS
Address
Lateral Sur Periferico Nte. 559, Parque
45150 Zapopan, Jalisco
Mexico
Phone
+52 33 37938800
Fax
+52 33 37938811
Internet address
www.interglass.com.mx
E-Mail
gperalta@interlub.com
Stand
Hall 13, A24 (Page 540)
INTCO GmbH
Refractory materials
Feuerfeste Erzeugnisse
Lieferspektrum sind vorwiegend standardisierte FF-Produkte,
die von ausgewählten Lieferanten bezogen werden.
Für diese Produkte gelten unsere Intco- Eigenschaftsvorgaben, welche einerseits auf unsere langjährige Erfahrung basieren, sowie die etablierten internationalen
Standards wie „ISO“ und „PRE-Recommendations“ berücksichtigen.
Product Overview
Alle Materialien werden vor Versand einer sorgfältigen Qualitätsprüfung unterzogen.
Product Details
INTERGLASS
glasstec.01.02.03
Lubricators and coolants
glasstec.01.06.16
Spray Systems for gob forming
glasstec.01.02.03
INTERGLASS
Lubricators and coolants
Interglassoil Biogreen
Interglassoil Biogreen is a new and improved shear water coolant lubricant that
has been designed to mix instantly with water creating a very stable emulsion
while providing a clean shear cut. Interglassoil Biogreen is compounded with
the highest quality of base stock material in addition to wetting and dispersing
agents, Interglassoil Biogreen should virtually eliminate buildup and blockages
throughout the system.
Interglassoil Biogreen has a green color and is formulated with totally biodegradable components and should not present any problems to water effluents.
© 2010 Messe Düsseldorf GmbH
295
© 2010 Messe Düsseldorf GmbH
296
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.06.16
Spray Systems for gob forming
Interprojekt GmbH
Interglassoil Biogreen
Address
Katernberger Str. 135
45327 Essen
Germany
Phone
+49 201 8302635
Interglassoil Biogreen has a green color and is formulated with totally biodegradable components and should not present any problems to water effluents.
Fax
+49 201 8302650
RECOMMENDATION FOR ITS USE
Internet address
www.interprojekt.org
Before diluting Interglassoil Biogreen, the container has to be warmer before its
use to attain room temperatures between 21º to 27º C, the Interglassoil Biogreen
will be completely liquid, cleaner aspect and light green color.
E-Mail
frank.peschke@interprojekt.org
Stand
Hall 15, D47 (Page 552)
Interglassoil Biogreen is a new and improved shear water coolant lubricant that
has been designed to mix instantly with water creating a very stable emulsion
while providing a clean shear cut.
Interglassoil Biogreen is compounded with the highest quality of base stock material in addition to wetting and dispersing agents, Interglassoil Biogreen should
virtually eliminate buildup and blockages throughout the system.
A dilution ratio of one part of Interglassoil Biogreen by volume to 600-800 parts
of water by volume is initially recommended. The dilution can be increase if
the operating conditions permit it. The dilution water should be between 16º to
38º C recommending treating the water, especially where the hardness of the
water is higher. Interglassoil Biogreen contained on the holding tank should be
maintained at warm temperatures ranging from 27º to 38º C, recommending a
soft and constant shake in order to maintained auniform mixture. Adjust the
proportioned pump to provide a mixture of one part of Interglassoil Biogreen
between600-800 parts of water.
Product Overview
Interprojekt GmbH
glasstec.01.03.08
Raw material technology and prewarming cullet
technology
glasstec.01.04.10
NOx control technology
glasstec.01.04.11
Filter technologies (smoke and electrostatic)
glasstec.02.12.04
Purification of exhaust gases
Product Details
glasstec.01.03.08
Interprojekt GmbH
Raw material technology and prewarming cullet technology
Waste Heat Recovery
Batch and Cullet Preheating
INTERPROJEKT’s preheating system was first developed at Nienburger Glas,
Germany. The hot flue gas from the glass furnace is directed through the preheater in counter flow to the glass raw materials. The flue gas and the batch
© 2010 Messe Düsseldorf GmbH
297
© 2010 Messe Düsseldorf GmbH
298
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
and cullet are in direct contact. The results are the evaporation of the containing
moisture and the removal of some of the acidic impurities, such as SOx, HCl
and HF.
The main features of this system are: up to 20% energy savings environmental
benefits thanks to reductions in CO2 and NOX emissions and the removal of
SOX, HCl and HF operating experience since 1987 (the second furnace campaign is currently in progress) reference installations for both cross-fired and
end-fired tanks as well as for oxy-fuel furnaces
Secondary Heat Recovery
Installation of boiler / heat exchanger for the generation of: steam for power generation and heating processes, interesting for big installations like float furnaces
hot water for plant use and district heating
Preferably, the heat exchanger is located down stream the high temperature
ESP. At higher gas temperatures often a two-stage arrangement is used, then
the ESP is located between the raw gas and the clean gas boiler.
the gas temperature, acid components in the gas and the bag cleaning process,
the filter medium often have a short life and must be replaced. Pressure drop
across a baghouse is at least five times greater than across a precipitator. For
special applications – like online coating processes – we install baghouses as
part of the complete waste gas treatment system.
Reactors
We supply dry reactors to neutralise SOX, HCl or HF, mainly using lime as the
neutralising agent. Sometimes, sodium carbonate or bicarbonate is also used.
For removing boron, special applications or achieving high efficiencies we also
supply semi-dry processes.
ITALCARRELLI
Address
Via Monte Rosa, 9
36072 Chiampo / VI
Italy
Phone
+39 0444 623393
Electrostatic Precipitator (ESP) / Wet Electrostatic Precipitator (WESP)
Fax
+39 0444 420195
Modular designed ESPs are mainly used for cleaning hot flue gases containing
dry and not sticky particulates, such as the waste gas from glass furnaces.
Internet address
www.italcarrelli.eu
E-Mail
info@italcarrelli.eu
Stand
Hall 15, C24 (Page 552)
glasstec.01.04.11
Filter technologies (smoke and electrostatic)
Waste Gas Cleaning
Waste Gas Cleaning
INTERPROJEKT supplies complete waste gas cleaning systems.
In certain industrial processes, such as in the forming and curing of insulation
fibre or in the dryers used in wood-chipboard production etc., the particulates
produced are sticky. In such cases, WESPs are a cost-efficient way of cleaning
the waste gas.
McGill-type horizontal-flow units with multiple fields are very efficient systems
for dealing with stringent air-pollution control requirements and offer a number
of unique features: a strictly modular design with five basic units the discharge
electrodes are rigid steel plates with riveted needle strips a low energy requirement
Product Overview
glasstec.01.13.02
ITALCARRELLI
Transport and handling systems
For these special applications, we can rely on the experience gained from more
than 170 reference installations.
Baghouse
Baghouses (in theory) can offer very high particulate collection efficiency. They
depend on a filter blockage in the gas stream. Due to the nature of the dust,
© 2010 Messe Düsseldorf GmbH
299
© 2010 Messe Düsseldorf GmbH
300
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
ITALCARRELLI
Product Overview
glasstec.01.13.02
IWG Ingenieurbüro Wagenbauer Glasofenbau GmbH
Transport and handling systems
glasstec.01.04.02
Forehearth technology
The PTN is designed for handling glass loaded on inloader stillages (Jumbo
Size). The lifting system is an evolution of ”Sicur - Lift” (patent pending) that
guarantees, also in breakcase, the maximun stability of the machine even if it
is loaded. The PTN is available as battery or Diesel powered truck and with
special tyres to work on tarmac floor. A wide range of optionals like secondary
drive panel control, seated operator place with electronic turning, removable bad
weather protection for the charging zone, etc are also available.
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.04
Smelting technology for pot furnaces
glasstec.01.04.06
Regenerative systems
Serie - Series: PTN
glasstec.01.04.07
Recuperative systems
glasstec.01.04.08
Electrically heated systems
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
glasstec.01.04.09.02
Combustion technology for oxygen heating systems
glasstec.01.04.10
NOx control technology
glasstec.01.04.13
Feeder colouring
glasstec.01.06.04
Bar feeder
glasstec.01.08.03
Textile glass fibre technology
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.06
Contracting, consulting, engineering, services
PTN
TPEN
The TPEN is designed to transport glass on stillages with load capacity up to
33.000 Kg. The lifting system is an ITALCARRELLI® is patent pending called
”Sicur - Lift”, that guarantees, also in breakcase, the maximun stability of the
vehicle even if it is loaded. Special lock glass system by arms for ”A” or ”L”
stillages are available on request. Platform dimensions and load capacity of the
vehicle are on request
IWG Ingenieurbüro Wagenbauer Glasofenbau
GmbH
Address
Fürhaupten 35
94227 Zwiesel
Germany
Phone
+49 9922 8448-0
Fax
+49 9922 8448-21
Internet address
www.iwg-online.com
Product Details
E-Mail
info@iwg-online.com
Stand
Hall 13, B33 (Page 540)
© 2010 Messe Düsseldorf GmbH
glasstec.01.04.02
IWG Ingenieurbüro Wagenbauer Glasofenbau GmbH
Forehearth technology
vorherde
IWG - gasbeheiztes Vorherd-System
301
© 2010 Messe Düsseldorf GmbH
302
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
für die folgenden Produktionslinien:
• Bessere Regulierbarkeit auf Grund stufenloser Leistungszufuhr
• Behälter
IWG-Vollelektrisch beheizte Vorherde für Bleikristall-Glas
• Glasbausteine
IWG-Vollelektrisch beheiztes Vorherd-System
• Beleuchtungskörper
Einsatz von horizontalen, durch die Kanalseitenwand installierten Zinnoxid-Elektroden.
• Flakons
Die Glasoberfläche wird durch eine eintauchende AZS-Platte abgedeckt. Zur
Beheizung des Vorherd-Oberbaus wird der Vorherd mit Molybdän-Disilizid-Heizelementen
ausgestattet.
• Tafel- / Kelchgläser
Vorteile unseres Systemes:
Wir passen den Vorherd der jeweiligen Situation an Ihrer Produktionslinie an.
Folgende Optionen sind verfügbar:
Die Leistungszufuhr jeder Vorherdzone wird über Einphasen-Thyristorsteller /
Transformatoren geregelt.
• Vorherd-Färbung, elektrisches Boosting
Jeder Vorherd ist mit einer IWG-Rührereinheit und falls erforderlich optional mit
einem IWG-Drainage-System ausgestattet.
• Aktivisolierung (elektrisch beheizt) des Kanals
Vorteile:
• IWG-Rührereinheiten zur Glashomogenisierung
• Bessere thermische Homogenität
• IWG-Drainage-Systeme für Vorherde zur Minimierung von Zirkonschlieren
• Keine Bleiabdampfungen
IWG-Vollelektrisch beheizte Vorherde
• Weniger Schlieren
für die folgenden Produktionslinien:
• Leistungszufuhr
• Neutral-Glas
glasstec.01.04.04
• Borosilikat-Glas
Smelting technology for pot furnaces
Pot furnaces
• Bleikristallglas mit 24% PbO
IWG supplies various types of pot furnaces. The pot
furnaces can be electrical, oil or gas heated.
Vollelektrisch beheizter Vorherd für Neutral-Glas und Borosilikat-Glas
IWG direkt elektrisch beheiztes Vorherd-System
für Neutral-Glas und Borosilikat-Glas mit Molybdän-Top-Elektroden, die durch
die Vorherd-Abdeckplatte ins Glasbad eintauchen.
Die Leistungszufuhr an den Elektroden wird geregelt durch Einphasen- Thyristorsteller / Transformatoren.
We deliver single pot furnaces as well as pot furnaces
up to 12 pots for soda lime glass, crystal glass, colored
glass. Our pot furnaces are designed to the latest Kow
How in furnace design.
Für die Inbetriebnahme und Temperphase werden diese Vorherde mit einem
speziellen Brennersystem geliefert, das im Normalbetrieb nicht mehr im Einsatz
ist. Um Glasschlieren zu verhindern, ist jeder dieser Vorherde mit einem IWGDrainage-System und einer IWG-Rührereinheit ausgestattet.
Vorteile
• Niedriger Energieverbrauch
• Bessere thermische Homogenität
• Keine Abdampfung von Bor
© 2010 Messe Düsseldorf GmbH
303
© 2010 Messe Düsseldorf GmbH
304
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
blenders etc. Customer can choose the most suitable press machine models
based on their own specifications and requirements. We have a team of highly
skilled glass production professionals and machinery experts ready to provide
any technical assistance and to build the most suitable press machine for the
glass plants.
JCL Engineering Pte Ltd
Address
10, Anson Road, #23-04, International
079903 Singapore
Singapore
Phone
+65 62254867
glasstec.01.06.13
Moulds for glass production
Glass Container Molds
Fax
+65 62238298
Features
Internet address
www.jochenlee.com
We have more than 50 years of experience in producing high quality molds for
containers such as bottles, jars, mugs etc.
E-Mail
jclsin@jochenlee.com
These container molds can be in the form of single, double or triple gob cavity
for use on IS-Blow & Blow and IS Press & Blow machine.
Stand
Hall 13, B13 (Page 540)
Casting is done in house and the container moulds are manufactured to a high
precision conforming to customers’ requirement.
Quality is ensured through inspection at every stage of the manufacturing process.
Product Overview
JCL Engineering Pte Ltd
glasstec.01.06.01
Gob feeder
glasstec.01.06.07
Press machines
glasstec.01.06.12
Bottle and glass container machines
We have successfully developed material of international standard such as JC5
cast iron, Minox etc. that ensure a longer lifespan for the glass container molds.
glasstec.01.07
Moulds for glass production
glasstec.01.07
Equipment for glass tube production
glasstec.01.06.07
Features
Molds for Glass tableware such as plates, cups, tumbler etc. usually have artistic
sculptured cavity. We have EXPERT capablity in producing these molds no
matter how complex the design is.
glasstec.01.06.13
Product Details
Equipment for glass tube production
Glass Container Molds
The molds can be in the form of block molds, split molds with double or triple
parts for us in MDP, H-28 or 0-90 machines.
JCL Engineering Pte Ltd
Press machines
JCL Press Machine
Jochenlee (JCL) develops and manufactures various models of press machines
according to customer’s need.Since the founding of our company in 1952, we
have produced more than 100 press machines for the glass industry, including
JP-12, JP-16, JPK-12, JPKD-12 and JPDG-24. These machines can be used for
producing glass tumblers, bowls, plates, tea cups, beer mugs, water jugs, juice
© 2010 Messe Düsseldorf GmbH
305
© 2010 Messe Düsseldorf GmbH
306
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
• schützt das Material vor Verbrennungen,
JUTEC® Hitzeschutz GmbH
Address
Phone
Fax
(z.B. durch Schweißperlen, Funkenflug etc.)
Mellumstr. 23-25
26125 Oldenburg
Germany
• asbestfrei
Flammschutzpasten ”N” und ”J”
+49 441 30099-0
• Hitzeschutz bis ca. 3000 ºC, asbestfrei
• Weiterfluß der Hitze im Material wird unterbunden
+49 441 30099-99
• kostspielige und zeitaufwendige Demontagen entfallen
Internet address
www.jutec.com
E-Mail
info@jutec.com
Stand
Hall 10, F42 (Page 534)
• die zugeführte Energie wird auf den Einsatzbereich konzentriert
• toxikologisch unbedenklich
Product Overview
Paste ”N”
JUTEC® Hitzeschutz GmbH
wird mit dem Spachtel aufgetragen und ist ideal für lange Schweißnähte. Die
Paste ist weich und flexibel.
glasstec.01.02.01
Refractory materials
Paste ”J”
glasstec.02.11.03
Insulating C203materials
wird mit der Hand aufgetragen und klebt nicht an den Fingern bzw. am Material.
Die Paste ist fest und modellierbar.
glasstec.02.11.04
Sealants
glasstec.03.06.02
Braided wire hoses and straps made of fibreglass
glasstec.04.05
Protection devices
glasstec.04.06
Working clothing
Product Details
glasstec.01.02.01
JUTEC® Hitzeschutz GmbH
Refractory materials
Flammschutzmatten ”trocken und feucht” von 700 ºC bis 3000 º
• direkte Löt- bzw. Schweißunterlage
• Materialstärken von 5 - 50 mm
© 2010 Messe Düsseldorf GmbH
307
© 2010 Messe Düsseldorf GmbH
308
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Kaltun Mining Co.
KANTHAL, Sandvik Heating Technology AB
Address
Aydin Mugla Karayolu 35. Km
09500 Cine-Aydin
Turkey
Phone
+90 256 7291600
Fax
+90 256 7291615
Internet address
www.kaltun.com.tr
E-Mail
kaltun@kaltun.com.tr
Stand
Hall 14, D02 (Page 548)
Address
723 27 Hallstahammar
Sweden
Phone
+49 6105 4001-0
Fax
+49 6105 4001-88
Internet address
www.smt.sandvik.com
E-Mail
info.kanthalde@sandvik.com
Stand
Hall 13, A61 (Page 540)
Product Overview
Product Overview
glasstec.01.01
KANTHAL, Sandvik Heating Technology AB
Kaltun Mining Co.
glasstec.01.04.08
Electrically heated systems
Raw material for glass production
Product Details
Product Details
glasstec.01.01
KANTHAL, Sandvik Heating Technology AB
Kaltun Mining Co.
glasstec.01.04.08
Raw material for glass production
Electrically heated systems
Kanthal Super
GlassTun
All glasstun products are suitable for use in the glass industry.With their low
titanium and iron oxide content, our products offer many advantages for use as
raw materials.All glasstun products are produced in mines located in the ÇineMilas region and owned by KALTUN MADENCİLİK SAN.TİC. AŞ. All glasstun
products are manufactured, prepared and transported in accordance with the
KALTUN quality management system and checked periodically.
Kanthal Super is the standard heating element in melting pot furnaces. Kanthal
Super, Superthal flat panels or silicon carbide heats feeder forehearths, and
Kanthal Super/Superthal is used for extra downdraw heating.
Kanthal is the worlds leading supplier of silicon carbide elements to the float
glass industry.
Continuous furnaces for glass bending, toughening etc. are heated by metallic
wire elements or flexible Fibrothal heating modules
Kanthal Super Heating Elements
High power and long life electric heating elements for use up to very high temperatures. Manufactured as ready-made elements, straight or bent in a broad range
of standard and special dimensions and shapes. Used mainly in laboratory furnaces and production furnaces in the glass-, electronics-, steel-, ceramics and
heat treatment industry.
© 2010 Messe Düsseldorf GmbH
309
© 2010 Messe Düsseldorf GmbH
310
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Six grades with specific features for use in new demanding applications and
atmospheres. Kanthal Super can now be used directly in nitrogen, hydrogen,
vacuum and mixtures of endogas and reducing atmospheres.
Keraglass Engineering S.r.l.
Address
Via Sassogattone, 7/B
42031 Baiso / RE
Italy
Phone
+39 0522 993027
Fax
+39 0522 993030
Internet address
www.keraglass.com
E-Mail
info@keraglass.com
Stand
Hall 16, D60 (Page 556)
Kararmaz Kalip San. ve Tic. Ltd. Sti.
Address
Yenimahalle Cebec Caddesi No. 76, Kükü
34250 Istanbul
Turkey
Phone
+90 212 535-6616
Fax
+90 212 535-6791
Internet address
www.kararmaz.com
E-Mail
kararmaz@kararmaz.com
Product Overview
Stand
Hall 14, B13 (Page 548)
glasstec.01.03.02
Drying technology
glasstec.01.09.05
Pre-heating furnaces
Product Overview
glasstec.01.06.13
Kararmaz Kalip San. ve Tic. Ltd. Sti.
glasstec.02.03.08.01.01Screen printing techniques
Moulds for glass production
Product Details
glasstec.01.06.13
Keraglass Engineering S.r.l.
Kararmaz Kalip San. ve Tic. Ltd. Sti.
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
Moulds for glass production
Product Details
Mould for glass industry
Supplier of Moulds for glass industry, Press , Blow & Blow and Blow process;
top glassware, bottles and glass containers
glasstec.01.03.02
Keraglass Engineering S.r.l.
Drying technology
Dryer Power Dry
Roller electrical drier.
This is a unique machine in its kind on the market. Its
main features are: small dimensions, high production
capacity and reliability.
© 2010 Messe Düsseldorf GmbH
311
© 2010 Messe Düsseldorf GmbH
312
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
The standard configuration (just 7 metres of length) can fully dry silk-screen
printed or glazed glasses so that they can be stored immediately in a vertical
position to save a lot of space inside the company.
The speed of the ceramic rollers as well as the temperatures of the different
modules can be adjusted from 2 to 8 metres/minute directly from the operator
panel.
Thanks to its fully stainless steel construction and to the technical solutions used,
no maintenance operation is required, and the machine is highly reliable even
under the heaviest working conditions.
glasstec.01.09.05
Pre-heating furnaces
King’s Metal Fiber Technologies Co., Ltd.
Address
8F., 426, Linsen N. Rd.
10451 Taipei
Taiwan
Phone
+886 2 25210298
Fax
+886 2 25811922
Internet address
www.kingsfiber.com
E-Mail
kingtex@texray.com
Stand
Hall 13, F24 (Page 540)
Oscillating electrical tempering systems
Oscillating electrical tempering systems with a module for glass curvature and tempering. This innovative patented continuous ring system offers an offset quenching and allows clients to meet any market demand. Cylindrical, complex cylindrical, spherical
glasses and glasses with special shapes (V, J, S, and
ct) can be tempered by using the same system while maintaining an excellent
optical quality because during the curvature and tempering process, no part (e.g.
rollers, spheres, etc.) is in contact with the glass. Moreover the system ensures
an extremely high repeatability level of the pieces because the system moulds
each piece with the same shape. The tempering and cooling section has been
developed as a module which can be added to an oscillating (KFO) or continuous (KCF) tempering system at a later time too.
Product Overview
glasstec.01.02.01
King’s Metal Fiber Technologies Co., Ltd.
Refractory materials
Product Details
glasstec.01.02.01
King’s Metal Fiber Technologies Co., Ltd.
Refractory materials
Knitted Fabric / XHK Series
100% stainless steel yarn to be knitted into the shape
of fabric can be used as the mold separator and formed
cushioning material for the automotive glass manufacturing process.
Knitted Sleeve / XHKS Series
100% stainless steel yarn to be knitted into the shape of
tubes can be used as the packing material or roller covers within the automotive or hollow glass manufacturing
process.
© 2010 Messe Düsseldorf GmbH
313
© 2010 Messe Düsseldorf GmbH
314
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Woven Fabric / XHW Series
glasstec.01.04.07
Recuperative systems
100% stainless steel yarn to be woven into the shape
of fabric can be used as the mold separator or vacuum
pad within the glass manufacturing process.
glasstec.01.13.03
Conveying, sorting and storage facilities
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
glasstec.02.12.04
Purification of exhaust gases
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
KREISEL GmbH & Co. KG
Address
Mühlenstr. 38
02957 Krauschwitz
Germany
Phone
+49 35771 98-0
Fax
+49 35771 60798
Product Details
glasstec.01.03.03
KREISEL GmbH & Co. KG
Metering and weighing technology
Self-Cleaning Rotary Valves
Internet address
www.kreisel.eu
E-Mail
info@kreisel.eu
Stand
Use:
Extraction with constant volume throughput or for volumetric metering of flow-resistant, damp, pasty and
sticky bulk materials.
Hall 13, C06 (Page 540)
Product Overview
KREISEL GmbH & Co. KG
glasstec.01.03.03
Metering and weighing technology
glasstec.01.03.04
Mixing technology
Transport capacity: up to 400 m³/h
Temperatur range: up to 300°C
Typs:
glasstec.01.03.10
Ventilation systems
glasstec.01.04.06
Regenerative systems
from Ø 70 to Ø 500 from 200 x 200 to 2000 x 2100
Materials:
All sizes as welded constructions from 1.0038, 1.5415 All sizes in a special
steels: 1.4301, 1.4541, 1.4571, 1.4828
Star feeder:
© 2010 Messe Düsseldorf GmbH
315
© 2010 Messe Düsseldorf GmbH
316
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.03.10
With side plates and 8 or 5 chambers as standard Special versions on request:
Steel/elastoblast etc. wear strips Star feeder without side plates Star feeder with
rounded chambers Star feeder with angled ridges Relief ground ridges Heated
and cooled versions
Shaft seal:
Gland packing or shaft sealing rings
Can be lubricated With connection for pressure air
Ventilation systems
Jet Bag Filter
Bag filter with filter bag length from 1200 up to 5400
mm Jet-pressure puls cleaning Selection of filter material subject to rawgas contentand temperature Cleangas content according TA Luft Modular system with different size Jet areas from 1,1 up to 2296 m² can be realized Design as double filter and with Penthouse also to
dry sorption of harmful gas used in all industries special
design realizable
Layout / Design:
Bearing: Externel roller bearing
dust decharge with hopper or dust collector tray with screw conveyor silo top
filter modular filter pressure shock resistant with burstdisc up to 0,4 bar (over
pressure) round filter pressure shock resistant up to 10 bar (over pressure) round
filter as silo top and with hopper exhaust vapours filter as pressure vessel up to
10 bar (absolute) all design optional in mild steel or stainless steel
Drive:
Elastic coupling and flange gear motor Chain and foot gear motor
Options:
Schlauchfilter
Rotation monitoring Speed control Adjusting gear motor
Gewebeascheider für diverse Stäube, auch Zyklonabscheider und Naßabscheider
Special versions:
Self-cleaning rotary valves Blowing-through valves rapid-dismantle valves tangential valves blade valves Pressure surge resistant to 10 bar and flameproof
with ATEX certificate Heated or cooled versions Hot gas versionHigh-pressure
valves Wear resistant version Bearing in housing / easy version
Zellenradschleusen
Austrag & Dosierung von Gemenge u.a.
durch
kontinuierliches Ausschleusen bei gleichzeitigem
Luftabschluss weiterhin: Doppelpendelklappen, Absperrschieber
© 2010 Messe Düsseldorf GmbH
317
© 2010 Messe Düsseldorf GmbH
318
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
These initiative developments give the client the following benefits
KTG Engineering Ltd.
Address
60 Savile Street East
S4 7UQ Sheffield
United Kingdom
Phone
+44 114 2759955
Fax
+44 114 2700875
Internet address
www.ktgengineering.com
E-Mail
sales@ktgengineering.com
Stand
Hall 13, A55 (Page 540)
Product Overview
glasstec.01.04.08
Flexibility of tonnage range
Faster response at a job change
Improved homogeneity
Reduced maintenance
TECO also provides electric forehearths through KTGSI where submerged/muffled
technology is used when there is a need to eliminate surface losses.
Kurt Merker GmbH
KTG Engineering Ltd.
Electrically heated systems
Product Details
glasstec.01.04.08
The ability to raise glass temperature or cool the glass in the distributor, reducing
the thermal requirement on the forehearth
KTG Engineering Ltd.
Address
Elsterstr. 6
93309 Kelheim
Germany
Phone
+49 9441 3355
Fax
+49 9441 12815
Internet address
www.merker-kmk.com
E-Mail
info@merker-kmk.com
Stand
Hall 09, E30 (Page 532)
Electrically heated systems
ZEDTEC distributor/forehearth systems
TECO provides ZEDTEC distributor/forehearth systems that delivers glass at
the orifice with precise temperature, homogeneity and control. Each distributor
and forehearth system is individually designed to meet the clients’ glass requirements.
Benefits of ZEDTEC Systems
Roof mounted Hot Spot burners designed for heating and cooling
Forehearth rapid cool technology
Air damper units for pressure control (no mechanical parts)
Low forward velocity burners for conditioning sections
Zed-Cel calculated energy loss substructure design
Frame computer design to optimize performance
© 2010 Messe Düsseldorf GmbH
319
© 2010 Messe Düsseldorf GmbH
320
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Overview
glasstec.07.02
Specialised Publishers
glasstec.21.02
Special offers for glass trade / crafts
Kurt Merker GmbH
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.02.01.02
Glass saws
glasstec.02.01.05
Sawing machines and rim polishing machines
glasstec.02.02
Drilling technology
glasstec.02.03.02.01
Decorative grinding technology for hollow glass
glasstec.02.03.02.02
Surface grinding for moulded glass
glasstec.02.03.03
Matting/Supercalendering/etching/sand blasting
technologies
Product Details
glasstec.01.06.17
Kurt Merker GmbH
Aids for the forming of hollow glass
Tools for glass
glasstec.02.03.05
blowing irons, punty irons, yokes, blow iron roller,
wooden blocks, mechanical boy, blowing moulds, optical moulds, mould dope, straight shears, handle shears,
jacks, pincers, ladles, heat mitten, gathering irons,
calipers, strain viewers
Körting Hannover AG, Bereich W, Industrie- u.
Prozesswärme, Feuerungstechnik
Polishing technology
glasstec.02.11.01
Tools
glasstec.02.11.08.02
Chemical grinding and polishing materials
glasstec.03.10.03.01.01Grinding technology
glasstec.03.10.03.01.02Grinding and polishing materials
glasstec.03.10.03.01.03Blasting technology
glasstec.03.10.03.02.13Creative glass products (glass art)
glasstec.04.01.03
Tools and smelting equipment for glass makers
glasstec.04.02
Cutting, grinding and drilling tools
© 2010 Messe Düsseldorf GmbH
321
Address
Badenstedter Str. 56
30453 Hannover
Germany
Phone
+49 511 2129-0
Fax
+49 511 2129-223
Internet address
www.koerting.de
E-Mail
w@koerting.de
Stand
Hall 13, B90 (Page 540)
© 2010 Messe Düsseldorf GmbH
322
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
requirements (low pollution – NOx)
Product Overview
Körting Hannover AG, Bereich W, Industrie- u....
glasstec.01.04.05
Gas equipment and supply systems
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
glasstec.01.04.10
NOx control technology
Product Details
glasstec.01.04.09.01
· solid fuel combustion equipments (petrol coke) for regenerative melting tanks
· oil- and gas burners with high heat transfer effectivity and low pollution(NOx)
for recuperative melting tank applications for combustion air temperatures up to
800°C
· oil- and gas-Duoblock burners for working ends, sand driers, tempering furnaces and other auxiliary furnaces of the glass industry
· oil- and gas-Monoblock burners for sand driers, tempering furnaces and other
auxiliary furnaces of the glass industry
Körting Hannover AG, Bereich W, Industrie- u....
Combustion technology for oil and gas fired smelting
furnaces
Firing systems for the glass industry
For decades now Körting, as providers of complete firing systems, fulfils all equipment demands for the manufacturing of flat-, hollow- or technical glass. Körting
offers a port know-how based on over 80 years of experience and accordingly the right firing system for every
furnace.
Körting’s service package includes project-based advice, calculations and construction so that an object-related optimum flame position and maximum economic heat transfer to the smelt is assured whilst still observing the environmental aspect of the whole. Consulting and engineering include the project-related
designing of firing systems according to the: - Körting Underport System - Körting Sideport System - Körting Throughport System
Following intensive consultations with the customer, Körting plots the best suited
burner arrangment for the individual plant in question. With due observance
being paid to furnace type, dimensions, fuel and technical conditions, Körting
then prepares a proposed equipment layout - port cross-section - crown- and
floor angles - number of lances and - lance arrangement under the aspect of a
best possible combustion, energy conversion between the flame and the melt
and pollutant emission.
· premix burners for feeders
· gas-Monoblock burners for the heating of annealing and decorating lehrs
Oil firing plants for melting tanks
· Station units for light- and heavy oil acc. to DIN 51603 or equivalent, with:
- reversal tracks for the change over of the fuel gas acc. to the regenerativereversal sequence - reversal tracks for the change over of the atomising medium
(compressed air or steam) acc. to the regenerative- reversal sequence - fuel
flow control tracks with oil flowmeter and flow control valves (pneumatic/ electric
actuated) for the oil flow control - pressure control tracks for the oil pressure
control - online-oil heaters for heavy oil-elektric-, steam- or thermo oil- heated
- oil viskosity measurement/ - control - oil operation pumps - insert oil heaters
for oil storage tanks - oil discharge tracks for trucks or railway wagons · electric/
electronic control equipment for the oil firing plant · design, supply, assembly,
commissioning, service
Gas firing plants for melting tanks
·station units for fuel gases (natural gas, LPG, town gas, coke oven gas), with
- reversal tracks for the change over of the fuel gas acc. to the regenerativereversal sequence - fuel flow control tracks with gas flowmeter and flow control valves (pneumatic/ electric actuated) for the gas flow control - gas pressure
control tracks with safety shut-off valve - main gas safety track gas- emergency
cut-off - gas filtering track - gas-/ air- mixture plants - LPG vaporizing plants ·
electric/ electronic control equipment for the gas firing plant · design, supply,
assembly, commissioning, service
Burner equipments
· oil- and gas burner lances with high heat transfer effectivity and low pollution(NOx) for regenerative melting tank applications for - Underportinstallation Sideportinstallation - Throughportinstallation (water cooled) burner port design
for an effective heat release in the melting tank under consideration of ecological
© 2010 Messe Düsseldorf GmbH
323
glasstec.01.04.10
NOx control technology
Thermische Abgasreinigung
Die thermische Nachverbrennung ist ein wirkungsvolles und allgemein anerkan-
© 2010 Messe Düsseldorf GmbH
324
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
ntes Verfahren zur Behandlung und Reinigung von Abgasen. Mittels speziell
von der Körting Hannover AG entwickelten Verfahrenskonzepten und Produkten
werden organische Schadstoffe mit einem angemessenen technischen Aufwand
thermisch z.B. auf TA-Luft-Grenzwerte umgesetzt.
Neben der Anlagenbilanzierung und -optimierung mittels Simulationssoftware
werden die Verbrennungsprozesse und Flammenführung sowie die Rauchgaswäsche
sowohl separat als auch als Gesamtsystem im Umwelttechnikum an die individuelle Aufgabenstellung des Kunden angepasst und optimiert. Eine Auflistung der
Körting-Engineering- und Serviceleistungen ist unter schlüsselfertiger Großanlagenbau aufgeführt.
Die Körting CK-Brenner wurden speziell für den Einsatz an Brennkammern,
Heißgaserzeugern und Dampfkesseln entwickelt, und zeichnen sich u.a. durch
eine gestufte Verbrennungsluftführung aus. Der thermische Energieinhalt des
Rauchgases wird in einem Dampfkessel zur Dampferzeugung genutzt. Technische Daten: Abgasverbrennung: 100 - 700 Nm³/h Thermische Leistung: 3 MW
Ausbrandtemperatur: 1000°C
Lahti Precision Oy
Address
Ahjokatu 4A
15800 Lahti
Finland
Phone
+358 3 82921
Fax
+358 3 82941-00
Internet address
www.lahtiprecision.com
E-Mail
glass@lahtiprecision.com
Stand
Hall 15, A42 (Page 552)
Product Overview
Lahti Precision Oy
glasstec.01.03.01
Crashing and grading
glasstec.01.03.02
Drying technology
glasstec.01.03.03
Metering and weighing technology
glasstec.01.03.04
Mixing technology
glasstec.01.03.06
Cullet preparation
glasstec.01.03.07
Refuse collection and glass recycling
glasstec.01.10.02
Cullet transportation
glasstec.02.12.01
Treatment of used glass
glasstec.05.01.05
Control and automation technology
glasstec.05.03.04
Process control systems
Product Details
glasstec.01.03.01
Lahti Precision Oy
Crashing and grading
Cullet return systems
Cullet is a raw material as any other in the glass making
process and its collection, handling, storage and dosing needs to be integrated into the concept of the batch
plant in as automated a way as possible.
Float glass cullet handling systems mainly for internal
cullet crushing and conveying to outside storage or to batch house silos. Lahti
Precision has supplied many systems and has a long experience in using so
called hopper bottom cullet breakers, which simplify cullet handling.
Hollow glass cullet return systems for handling hot cullet and glass gobs, as well
as cold cullet. Hot cullet is water quenched on a scraper conveyor equipped with
© 2010 Messe Düsseldorf GmbH
325
© 2010 Messe Düsseldorf GmbH
326
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
gob mangles if necessary to keep the pieces of reasonable size for automated
handling.
glasstec.01.03.03
glasstec.01.03.07
Refuse collection and glass recycling
Cullet return systems
Recycled glass process systems
Metering and weighing technology
Batch Plants and Weighing Systems
Lahti Precision’s two goals in the conception and realisation of a batch plant are
to achieve the highest consistent quality of the mixed batch going into the furnace
and to ensure the long-term day-to-day operational reliability of the plant.
High quality glass is dependent on the accuracy of dosing of each raw material
and the adequate mixing of the materials including any colorants or additives
which may be required. By using high quality load cells, weighing indicators,
hopper scales and dosing devices, controlled and linked up by a sophisticated
rapid response control system, - all of own manufacture, - Lahti Precision can
guarantee that a consistently homogeneous mix will be available in the furnace
charger.
Lahti Precision’s plant engineering philosophy is to achieve simple material flow,
using gravity and as few changes of direction as feasible, with a minimum number of pieces of equipment. The objectives are high reliability and low maintenance costs. Lahti Precision applies the same principles whether the batch
plant or weighing system is for the production of float, hollow and fibre glass
although the tolerances and hence the overall cost may be different according
to the application.
Lahti Precision has always been particularly attentive to the conditions within
the batch plant so as to provide a safe low-dust working environment for the
operating and maintenance staff and for the greater reliability of the plant.
Dosing and weighing systems
for removing harmful contaminants such as soil, stones, plastics, metal, ceramics and paper from external (environmental) cullet. Cleaning processes including washing, separation of ferrous, non-ferrous and ceramic particles and colour
sorting can be all done with automatic machines. Such equipment guarantees
a cullet purity which is not possible using manual methods.
Langendorf GmbH
Address
Bahnhofstr. 115
45731 Waltrop
Germany
Phone
+49 2309 938-0
Fax
+49 2309 938-190
Internet address
www.langendorf.de
E-Mail
export@langendorf.de
Stand
Hall 13, A93 (Page 540)
High quality glass is dependent on the accuracy of dosing of each raw material and the adequate mixing of
the materials including any colorants or additives which
may be required.
Lahti Precision has nearly 100 years’ experience in
delivering high-precision weighing and dosing systems
and components. By using high quality load cells,
weighing indicators, hopper scales and dosing devices,
controlled and linked up by a sophisticated rapid response control system - all
of own manufacture - Lahti Precision can guarantee that a consistently homogeneous mix will be available in the furnace charger.
© 2010 Messe Düsseldorf GmbH
327
© 2010 Messe Düsseldorf GmbH
328
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Company News
07/23/2010
Langendorf GmbH
World premiere: ”Railliner” First glass-Innenlader for
combined street/rail-transportation
Economic, money-saving and eco-friendly float glass
transport
world premiere in hall 13, booth 93Langendorf
Glas-Innenlader „Floatliner“ for the combined traffic
Langendorf on Glasstec 2010
Flat glass transportation 2010 – world premiere in hall
13, booth 93
Langendorf Glas-Innenlader „Floatliner“ for the combined traffic
loat glass up to approx. 6,000-mm length can loaded
and transported from now on also on rail. Now, after
an almost three-year-field test by more than 100 vehicles with a leading European glass logistician, Langendorf releases the series manufactoring for the glassInnenlader ”Railliner”. In hall 13, booth 93, a vehicle of
this class is introduced for the first time to the public.
Furthermore a Langendorf-Floatliner in the proven standard design but with
longer axle base is shown in the open area of the fairground. This vehicle is
designed especially for traffic to Great Britain and the transport of longer glass.
Due to the enlarged axle base a total weight of these vehicles up to 44 to is possible in Great Britain. Nevertheless, the rear axle load may not exceed 24,000
kg. In addition this Floatliner is equipped with a cut-resistant tarpaulin.
Railliner With the Railliner, presented at the glasstec, now vehicles are available
to glass logisticians which has proved itself in more than 100,000 float glass
transports on street and rail. With the official market launch of the ”Railliner”
Langendorf underlines once more his position as the European market leader in
Innenlader vehicle technology.
Central advantages The unique advantages of the glass-Innenlader for rail transportation:
unaccompanied transport, consequently cost reduction (truck and driver) higher
profitability of the truck and trailer fleet higher pay load due to 44,000 kg gross
vehicle weight allowed in the combined traffic street/rail Diminished costs by
cancelled highway toll Reduction of the traffic density on highways by switching
load on rail cleaner CO2-footprint of the glass logistician.
For further information please contact Langendorf GmbH Bahnhofstraße 115 D
45731 Waltrop
Tel.: + 49 2309 938 0 Fax: + 49 2309 93 81 90 Mr. Bernhard Hoelscher Mr.
Carsten Duwe Mr. Albert Balke
© 2010 Messe Düsseldorf GmbH
07/24/2010
329
In the glass logistics the cost pressure is even higher than in all other transport
segments – although or for the reason that flat glass transportation is a special
transportation and the material loaded is sold economically priced by way of
comparison. Therefore it is intensively thought about how to reduce significantly
the costs when transporting flat glass without influencing the quality and flexibility
of the transport unfavourably.
Since many years Langendorf treats the questions and problems of the combined traffic. As in earlier years due to comparably low fuel costs for the road
traffic as well as toll-free motorways there was really few demand for glass Innenladers for the combined traffic, there is nowadays a brisk demand because
of the existing cost pressure. There will be even more cost pressure due to a
further planned increasing of toll fees or introduction of toll fees in the foreign
countries of Europe so that a combined traffic in the glass transportation will
surely have high response in the future.
Another reason for the quite late use of glass Innenladers in combined traffic is
that only for short time suitable wagons for taking up the Innenlader are available
in large quantity. Due to the fact that 3.21 high glass sheets are transported, the
Innenladers for their conception are quite low with only little ground clearance.
So the many existing standard wagons for platform semitrailers cannot be used
because there are construction parts in the lower chassis area of the glass Innenlader.
However, since a while so-called Twin wagons are available designed for low
constructed semitrailers and on which, with some adaptations on the Innenlader,
also glass Innenladers can be loaded.
Some time ago there had already been studies which had foreseen the actual
increase of costs for road transportation. Also some few transporters have been
seriously busy with the subject of the combined traffic for glass transportation
already for a longer period of time. Langendorf, too, looked into the technical
requirements of loading Floatliners on railways wagons at an early stage. Langendorf started production of a first prototype in autumn 2005. Already at the
beginning of 2006 this vehicle fully passed the technical approval of the Belgian
TRW.
© 2010 Messe Düsseldorf GmbH
330
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
ports to Great Britain.
The technical challenge The Floatliner is put on the wagon by a portal frame or
terminal lift. This generally is called “vertical handling”. Therefore there are lateral grip pockets on the bimodal Floatliner for taking up the vehicle. The newly
calculated and correspondingly reinforced chassis can be loaded up to a maximum total weight of 39,000 kg.
However, it could be achieved by clever measures that the surplus weight in
comparison to normal glass Innenlader is only approx. 300 kg. But this minus
is compensated several time over by the loading on wagons. Vehicles in the
combined traffic may have a total train weight of 44,000 kg. Therefore there is
a payload gain for the Floatliner in combined traffic of 3,700 kg.
A further difference to the normal glass Innenladers is that there is a second
security device for the axle assembly to avoid contact between glass rack and
the wagon during transportation. The Innenlader is put on this security device
during rail transportation to exclude swinging movements caused by the air suspension.
In total the vehicle is constructed in a narrower way as the pure road version so
that the small space conditions on the twin wagon are taken into consideration
and so that there is no contact between wagon and Innenlader when loading
although there is only few millimetres’ space. Also the modified lateral cover
takes the narrow space conditions into consideration. Should there be after all a
contact between lateral cover and twin wagon, the corresponding construction
parts on the Innenlader can be exchanged fast and at low costs.
A main difference to the pure road vehicles lies in the technical execution of the
Hydro-Push system. During rail transportation there is no voltage supply on the
wagon. Therefore the Hydro-Push system had to be equipped with a control
which makes it impossible that the system released itself from the glass load at
a pressure drop and leads to problems with the load securing.
The advantages of the glass Innenlader for the combined traffic summed up In
the following please find again all advantages of the Innenlader for the combined
traffic summed up briefly: Reduction of the traffic on volume on the motorways
by shifting to the railway Unaccompanied transportation, therefore cost reduction and higher profitability Higher payload by 44,000 kg total train weight in
combined traffic Reduced costs due to omitted toll fees and road pricing
The typical advantages of the Langendorf Innenladers in the glass logistics remain the same: Safety Rapidness Minimised glass break during transportation
In Great Britain the perm. total train weight is 44,000 kg when using a three-axle
tractor. However, it has to be paid attention that the axle load of the Innenlader
is maximum 24,000 kg.
Due to the prolonged wheelbase (8,050 mm instead of 7,650 mm) an optimum
load distribution for such transports to Great Britain is assured.
As in Great Britain vehicles with tarpaulin often are damaged by thieves or vandals (cutting of the tarpaulin), the exhibit disposes of a special tarpaulin in an
execution not to be cut.
Due to the prolonged wheelbase the shown vehicle is also especially suitable
for transporting glass length exceeding the usual 6 m glass length. It is also
possible to transport with such a vehicle two so-called DLF (length each 3,210
mm) on a glass rack one behind the other. For such use the optimum wheelbase
ensures a regular load distribution.
Should it be necessary to transport even longer glass dimensions up to a glass
length of 10,800 mm, Langendorf offers the suitable Innenlader solution for this,
too. The so-called long glass Innenlader for glass length of maximum approx.
9,000 mm have meanwhile been taken into the standard production programme.
This vehicle has also been calculated and tested in numerous ways regarding
load distribution and driving performance and therefore approved its worth several times.
Langendorf Langendorf had been founded in 1890 as forge and ironware specialised shop. Nowadays the company is the leading European manufacturer of
vehicles for the safe transport of large glass. Langendorf Floatliners are used in
all European countries and in many countries of Asia, America and Australia. In
addition the company belongs to the leading German manufacturers of tipping
vehicles, low-bed trailers and special vehicles for the construction field. Langendorf is known for the high quality of their products as well as for thought-out
special constructions. Many patents which had been applied for until today are
showing the inventive talent in the field of vehicle construction.
Product Overview
glasstec.01.13.07
Langendorf GmbH
Vehicles for glass transport
Glass Innenlader in prolonged execution especially for traffic to Great Britain or
for particularly long glass loads (exhibit in the open-air ground) The approved
Langendorf Floatliner is available in two lengths. The exhibit shown in the openair ground has a wheelbase of 8,050 mm and is especially designed for trans-
© 2010 Messe Düsseldorf GmbH
331
© 2010 Messe Düsseldorf GmbH
332
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.13.07
Langendorf GmbH
Vehicles for glass transport
Product Details
glasstec.01.13.07
Langendorf GmbH
Vehicles for glass transport
Semitrailer with half pipe aluminium tipping box,
type SKA-H
Semitrailer with half pipe aluminium tipping box,
type SKA-H
Absolute lightweights are Langendorf tipping semitrailers SKA-HS with aluminium half-pipe tipping box. In
connection with the well-tried chassis frame made of
fine corn steel Langendorf proves impressively that a
low dead weight does not need to be based on an aluminium chassis frame. Vehicles of this type have proved their excellent features
already in a lot of countries.
Absolute lightweights are Langendorf tipping semitrailers SKA-HS with aluminium half-pipe tipping box. In
connection with the well-tried chassis frame made of
fine corn steel Langendorf proves impressively that a
low dead weight does not need to be based on an aluminium chassis frame. Vehicles of this type have proved their excellent features
already in a lot of countries.
Langendorf GmbH
Lansing Unitra GmbH
Address
Bahnhofstr. 115
45731 Waltrop
Germany
Address
Winterswyker Str. 120
48691 Vreden
Germany
Phone
+49 2309 938-0
Phone
+49 2564 930530
Fax
+49 2309 938-190
Fax
+49 2564 930550
Internet address
www.langendorf.de
Internet address
www.lansing.de
E-Mail
export@langendorf.de
E-Mail
fahrzeugbau@lansing.de
Stand
Hall FG.13, 13-01
Stand
Hall 10, H30 (Page 534)
Product Overview
glasstec.01.13.07
Langendorf GmbH
Vehicles for glass transport
© 2010 Messe Düsseldorf GmbH
333
Product Overview
Lansing Unitra GmbH
glasstec.01.13.06
Glass racks for transport and warehouse
glasstec.01.13.07
Vehicles for glass transport
© 2010 Messe Düsseldorf GmbH
334
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.13.06
Lansing Unitra GmbH
Glass racks for transport and warehouse
ULG-LKW Anhänger
LAT Maschinen + Antriebstechnik GmbH & Co.
KG
Address
Venneweg 28
48712 Gescher
Germany
Phone
+49 2542 910-0
Fax
+49 2542 910-290
Internet address
www.lat-antriebstechnik.com
E-Mail
info@lat-antriebstechnik.com
Stand
Hall 14, E20 (Page 548)
Produktvorteile:=> Fahrgestell komplett feuerverzinkt
=> eingelassene C-Schienen im Fahrzeugboden
=> 27mm-Siebdruckboden in Finnischer Qualität
=> höhenverstellbare Zugvorrichtung
=> abnehmbare Rungen
glasstec.01.13.07
Vehicles for glass transport
UGA-F Flachtransporter
Ausführung:=> Fahrgestell komplett feuerverzinkt
=> A-Gestell in Alu-Schweißkonstruktion
=> Ladungssicherung durch Spannleisten mit Schiebemechanismus
=> lieferbare Längen: von 2.690 mm bis 6.240 mm
Product Overview
=> wahlweise mit seitl. Transportbank, Bordwänden oder A-Bock
=> eingelassene C-Schienen auf Wunsch
glasstec.01.09.02
LAT Maschinen + Antriebstechnik GmbH & Co. KG
Stacker systems
=> 100 km/h Abnahme möglich
Product Details
UNITRA Anhänger
LAT Maschinen + Antriebstechnik GmbH & Co. KG
Der Unitra-Anhänger:maßgeschneidert für den Fenstertransport
glasstec.01.09.02
=> Ladefläche geknickt mit 90 Grad Neigung zum A-Gestell
Flachmotoren
=> Fahrgestell komplett feuerverzinkt
Drehstrom und Einphasenwechsel-
=> A-Gestell in Alu-Schweißkonstruktion
Strommotoren in Flachbauweise.
=> automatisch hochklappendes Stützrad
• Produktbeschreibung
=> lieferbare Längen: von 2.690 mm bis 6.260 mm
Durch ihre kompakte und Platz sparende Bauweise sind Flachmotoren ideal
zum fräsen, kappen, ritzen, bohren, sägen, zerspanen oder schleifen – sowohl
in komplexen Maschinensystemen, in denen hohe Ansprüche, besonders an
die Laufgenauigkeit und Leistungsstärke der Antriebseinheit gestellt werden, als
auch in einfachen Maschinensystemen wo es um eine günstige und zuverlässige Antriebslösung geht. Unsere Flachmotoren laufen auch unter schwierigsten Bedingungen störungsfrei.
=> 100 km/h Abnahme möglich
Stacker systems
In der Serienausführung werden die Motoren für 50/100/150 oder 200Hz ausgelegt. Hierbei decken sie einen Leistungsbereich von 0,5 kW bis 50 kW ab.
© 2010 Messe Düsseldorf GmbH
335
© 2010 Messe Düsseldorf GmbH
336
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Die Flachmotoren werden in drei Hauptgruppen unterteilt:
Lattimer
K62, K75 und K112. Innerhalb dieser Hauptgruppen gibt es weitere Untergruppen, welche eine sehr individuelle Auslegung der Motoren zulässt.
Address
Shakespeare Street
PR8 5AP Southport
United Kingdom
IP 54, IP 55 oder IP 65 ausgelegt werden.
Phone
+44 1704 535040
Durch die Lebensdauerschmierung der Lager sind Flachmotoren nahezu wartungsfrei und bedienungsfreundlich.
Fax
+44 1704 541046
Internet address
www.lattimer.com
E-Mail
sales@lattimer.com
Stand
Hall 13, D45 (Page 540)
Diese sind vollkommen geschlossen, und oberflächengekühlt. Sie können je
nach Bedarf für die Schutzart:
Reibradgetriebemotoren
Mechanisch stufenlos verstellbarer Antrieb mit reibschlüssiger Kraftübertragung
für horizontale und vertikale Anordnung, lieferbar in neun Baugrößen.
• Produktbeschreibung
Nimmt die Drehzahl im Abtrieb ab, steigt das Drehmoment – dies ist das Grundprinzip der Reibradgetriebe. Anders als beim FU-Betrieb bleibt die Motorleistung bei abfallender Drehzahl konstant, und das Drehmoment steigt. Durch
die stufenlose Verstellbarkeit des Reibradgetriebes sind sowohl Untersetzungen, als auch Übersetzungen möglich.
Reibradgetriebe finden ihren Hauptanwendungsbereich in der Textil-
Product Overview
Lattimer
glasstec.01.06.12
Bottle and glass container machines
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
und Lebensmittelindustrie.
Die Kraftübertragung erfolgt durch ein bzw. zwei hintereinander angeordnete
Reibradpaare.
Die zur Leistungsübertragung notwendige Anpresskraft wird belastungsabhängig
von einer Nockenkurve erzeugt. Den für den Anlauf notwendigen Anpressdruck
leitet eine Druckfeder ein. Durch Betätigung der Stelleinrichtung ändern sich
die wirksamen Durchmesser von An- und Abtriebskegel. Hierdurch wird eine
Drehzahländerung erreicht.
Durch das Motox® - Baukastensystem ist es möglich, das Reibradgetriebe mit
weiteren Komponenten zu kombinieren
Product Details
glasstec.01.06.12
Lattimer
Bottle and glass container machines
Quick Change Blowhead Arms
A robust, lightweight Blowhead assembly manufactured from high quality aluminium billet for strength and
accuracy. It is equipped with a steel Quick Change
adaptor to provide secure clamping and eliminate problematic casting failure.
Benefits
Improved service life Blow & finish cooling Reduced drag & inertia Positive
© 2010 Messe Düsseldorf GmbH
337
© 2010 Messe Düsseldorf GmbH
338
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
clamping method Elimainate casting failure & torn threads Available as SG, DG
& TG
Product Overview
Lincoln GmbH, Zentralschmiersysteme
Address
Phone
lubricant quantities are matched to the requirements of each lubrication point,
and the amount is kept to a minimum
Heinrich-Hertz-Str. 2-8
69190 Walldorf
Germany
Lincoln GmbH, Zentralschmiersysteme
glasstec.01.02.03
Lubricators and coolants
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
+49 6227 33-0
Product Details
Lincoln GmbH, Zentralschmiersysteme
Fax
+49 6227 33-259
glasstec.01.02.03
Internet address
www.lincolnindustrial.de
Multi-zone Lubrication System
E-Mail
lincoln@lincolnindustrial.de
Stand
Hall 13, D92 (Page 540)
For the demand based individual lubricant requirements
of each zone on a glass machine. Lincoln Multi-zone
systems offer an economical, resource conserving and
environmental conscious solution. Lincoln centralized
lubrication systems supply all areas of machines and
systems with an exactly matched quantity of lubricant.
As a result, your valuable equipment is optimally protected with a minimal
amount of lubricant – and all negative impacts associated with under lubrication are eliminated.
Company News
09/17/2010
Lincoln GmbH, Zentralschmiersysteme
Fully Automated Lubrication Systems for Glass
Production Machines
Lincoln is the world leading manufacturer of automated lubrication systems,
lubrication tools and equipment. The comprehensive program includes automated lubrication systems for grease and oil, lubrication tools and service bay
equipment for fluid handling – covering all demands for professional industrial
lubrication.
Lincoln presents for the first time on Glasstec a new Single-line Lubrication System: Pumps 603S or 653S and QSL or SL lubricant injectors, suitable for highpressure. The single-line system’s design and layout is uncomplicated, making
it easy to install, program and operate.
Lincoln’s Multi-zone lubrication system offers an economical, resource conserving and environmental conscious solution for the glass industry. The Lincoln
Multi-zone system differentiates between the low and high demand zones of the
glass machine and supplies the amount of lubricant accordingly. As a result, the
© 2010 Messe Düsseldorf GmbH
339
Lubricators and coolants
The demands of individual zones of machines in glass production and processing vary in the type of lubricant used and the amount required. With conventional
systems, these conditional requirements are only partially taken into consideration. A differentiating lubricant supply, dependent on the demand of each zone
is not foreseen. The zones are, on the other hand, lubricated with adjustable
injectors set at the required quantity. However, since all zones are connected
to one mainline, all injectors, and the connected lubrication points, are supplied
with lubricant with every pump cycle. And the result is an increased lubricant
usage.
Conversely, the Lincoln Multi-zone system differentiates between the low and
high demand zones of the glass machine and supplies the amount of lubricant
accordingly. As a result, the lubricant quantities are matched to the requirements
© 2010 Messe Düsseldorf GmbH
340
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
of each lubrication point, and the amount is kept to a minimum.
to 3 pump elements. The output performance is 12 cm³/min for the 603S and
up to 24 cm³/min for the 653S.
A further advantage is provided by the control logic that is based on the Lincoln Multi Controller model LMC-1 that is integrated in the multi-zone system.
An integrated Field-bus module enables a connection to all common Bus type
systems. As a result, all prerequisites are met for the ideal lubricant supply to
the lubrication points in accordance with the production process. A production
change between two different glass containers that results in different lubrication
requirements on the machine can now be automatically performed with ease.
The Lincoln Multi-zone system also offers the operator the possibility of running
synthetic or mineral based oils in parallel. Consequently, the operator can use a
high-grade synthetic oil for areas that are highly strained, and a less expensive,
low-grade mineral oil for less strained zones.
Single-line Lubrication system P603S or P653S
The single-line 603S and 653S pumps automatically supply the lubrication points with exact metered quantities in
programmed interval while the equipment is in operation.
Easy to Service
It is quick and easy to exchange out an injector. The mainline or neighboring
injectors do not have to be removed. The exchange can be performed between
lubrication cycles so that there is no wastage of lubricant or excessive costly
downtime.
QSL and SL Injectors
QSL metering devices are designed for high pressure up to 300 bar, as they have
a metal-to-metal fit only. SL-1, SL-32 and SL-33 injectors work at up to 240 bar.
As a result, NLGI 2 greases can be pumped at temperatures below zero without
problems. All injectors operate independently of each other. This means that in
the event of a blockage or fault of one injector, all other injectors will continue to
supply lubricant. Each QSL injector has an individual output quantity of 0.05 to
0.4 cm³/stroke.
Visual Monitoring – To Ensure all is Well
As a result, the robust system is ideally suited for off-road
mobile equipment such as construction and mining machines and heavy-duty commercial vehicles. The system
also lubricates small to mid-sized stationary machines or machine groups.
Each injector has an indicator pin that moves with the pressure buildup and venting. This facilitates easy trouble-shooting when required by simply observing the
indicator pins.
Pump and Accessories – All-in-one
Additional Pressure Switch
The 603S/653S pump with integrated controller is easy to install. The allin-one design of the pump includes the programmable controller, a pressure
switch/transducer and a vent valve.
An additional pressure switch at the end of larger systems can be used for added
pressure control to ensure correct lubrication.
Simple System Design - Easy to Expand
The single-line system’s design and layout is uncomplicated, making it easy to
install, program and operate. A single mainline reduces material and installation
costs. The 603S/653S pumps can internally combine the lubricant output of up
© 2010 Messe Düsseldorf GmbH
341
© 2010 Messe Düsseldorf GmbH
342
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Linn High Therm GmbH
Address
Product Details
Heinrich-Hertz-Platz 1
92275 Eschenfelden
Germany
Phone
+49 9665 9140-0
Fax
+49 9665 1720
Internet address
www.linn.de
E-Mail
info@linn.de
Stand
Hall 14, A25 (Page 548)
Product Overview
glasstec.01.09.05
Linn High Therm GmbH
Pre-heating furnaces
High temperature laboratory furnaces, VMK
Advantages Fiber insulated high temperature furnace in stainless steel housing
with thyristor adjustment and safety controller, short heating and cooling cycles,
low energy consumption and space requirement, low weight, standard controller
dTron. Option: program controller SE 40. Application Laboratory furnaces for
laboratory, research and industry. Simple operation in single operation, with
short heating and cooling cycles for universal applications up to 1800 °C.
Logistic System Pichler GmbH
Address
Heinrichsbrunn 2
4310 Mauthausen
Austria
Phone
+43 7238 4215
Fax
+43 7238 29249
Internet address
www.logistic-system.at
E-Mail
info@logistic-system.at
Stand
Hall 13, C93 (Page 540)
Linn High Therm GmbH
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.01.09.05
Pre-heating furnaces
glasstec.02.04
Forming and bending technology
glasstec.03.02.07
Other coated types of glass
glasstec.03.02.09
Curved glass
glasstec.03.02.10
Printed glass
glasstec.21.03
Special offers for architects
© 2010 Messe Düsseldorf GmbH
343
© 2010 Messe Düsseldorf GmbH
344
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
LT GASETECHNIK GmbH & Co. KG
Product Overview
Logistic System Pichler GmbH
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.05
Warehouse technology
glasstec.01.13.06
Glass racks for transport and warehouse
glasstec.21.02
Special offers for glass trade / crafts
glasstec.21.03
Special offers for architects
Product Details
glasstec.01.13.06
Address
Martener Str. 535
44379 Dortmund
Germany
Phone
+49-231-961070-0
Fax
+49-231-613844
Internet address
www.lt-gasetechnik.de
E-Mail
mail@lt-gasetechnik.de
Stand
Hall 11, C03 (Page 536)
Logistic System Pichler GmbH
Glass racks for transport and warehouse
Slot Car
Used for storing and loading different sizes of single panes as easy as possible.
Optionally with 50 compartments (or 60 for Type FW60) which are separated by
plastics coated split rods. A plastic plate with end-to-end milled slots (width 12
mm) provides save transport and stocking. Type VHK is due to it’s construction
well suited for curved, oval or round glass or mirrors. High load capacities and
ball bearing rolls allow easily movement. Surface of frame is coated in RAL3020.
Product Overview
glasstec.01.04.05
LT GASETECHNIK GmbH & Co. KG
Gas equipment and supply systems
Product Details
glasstec.01.04.05
LT GASETECHNIK GmbH & Co. KG
Gas equipment and supply systems
Glass Transport Rack
Glass transport frames are used for internal and external transport of flat glass.
They are exactly tailored to customer’s needs and can save a lot of time and
money.
A rugged steel tube construction, special glass locking and rubber profiles assure save and secure glass transportation.
BULL -Series:
To secure glass panes we’re using belt strips which can be attached in a readymade grid (bottom). The belt is placed upside and clamped by a belt clip.
All rolling glass racks are equipped with roller bearing. For securing glass panes
all RUNNER types can be supplied with a height-adjustable GLAS FIX
Providing a huge variety of standard types we are able to cover a multitude of
application areas.
© 2010 Messe Düsseldorf GmbH
345
HIGH-DUTY GAS MIXING STATIONS
LT GASETECHNIK supplies:
Gas mixing units Inerting systems Gas control and metering devices Gas process engineering technology Gas analytical technolgy Development, design and production of gaseous technical
systems and equipment.
LT GASETECHNIK find solutions for nearly all gas control applications and
gases. Also complicated computer controlled gas mixing, metering and control
units - tailor made for the user - can be realized, e.g.
Complete package - transportable gas mixing units assembled in a 20-feet container Computer controlled gas mixing and analysing unit for production of form-
© 2010 Messe Düsseldorf GmbH
346
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
ing, shielding and reaction gas Central gas supply of a testing area Gas mixing
and metering units for production of different test gases at a manufacturer of
gasboilers Standard gas mixing unit for high quantity gas flow 2-components
standard gas mixing units.
LWN Lufttechnik GmbH
Address
Hühndorfer Höhe 7
01723 Wilsdruff
Germany
Phone
+49 35204 2708-0
Fax
+49 35204 2708-10
Internet address
www.lufttechnik-lwn.de
E-Mail
info@lwn-lufttechnik.de
Stand
Hall 13, F93 (Page 540)
Ask for brochures or allow us to offer you advice in your company.
Luoyang Dayang Refractory Co., Ltd.
Address
Songzhuang Development Zone, Mengjin
471121 Luoyang, Henan
China (Rep.)
Phone
+86 379 67071191
Fax
+86 379 67071166
Internet address
www.dyrefractory.com
glasstec.01.03.10
E-Mail
dynh002@l26.com
Product Details
Stand
Hall 10, A82-32 (Page 534)
glasstec.01.03.10
Product Overview
LWN Lufttechnik GmbH
Ventilation systems
LWN Lufttechnik GmbH
Ventilation systems
Complete ventilation systems
Product Overview
glasstec.01.02.01
Luoyang Dayang Refractory Co., Ltd.
Refractory materials
Product Details
glasstec.01.02.01
for glass industry dust exhausting equipment for other sectors of industry general
exhausting systems technological steel construction consultation and planning
with our specialists
Luoyang Dayang Refractory Co., Ltd.
Refractory materials
DY-A(α)
INTROUCTION:DY-A(α) is an ideal product for the lower temperature zones of
the glass melting furnaces due to its high density,surperior corrosion resistance
and low blister potential.It is also an ideal material for Matallurgical Titanium
Furnace because its superior thermal stability.
© 2010 Messe Düsseldorf GmbH
347
© 2010 Messe Düsseldorf GmbH
348
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Löwinger GmbH,
Glasbearbeitungsmaschinenbau
glasstec.01.06.12
Address
Reichenbacher Str. 16
97702 Münnerstadt
Germany
Phone
+49 9733 8140-0
Fax
+49 9733 8140-20
Internet address
www.loewinger.de
E-Mail
maschinenbau@loewinger.de
Stand
Bottle and glass container machines
Double capillary blowing machine with turning facility
Type T4 B7 A-420/ S.D.W.
M.T. Forni Industriali S.r.l.
Address
Via Pialoi, 104
30020 Marcon / Venezia
Italy
Phone
+39 041 4569356
Fax
+39 041 4567002
Internet address
www.mtforni.com
E-Mail
info@mtforni.com
Stand
Hall 13, E11 (Page 540)
Hall 14, D47 (Page 548)
Product Overview
Löwinger GmbH, Glasbearbeitungsmaschinenbau
glasstec.01.06.11
Ampoule and laboratory glass machines
glasstec.01.06.12
Bottle and glass container machines
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.02.01.01.03
Cutting technology for technical glass
Product Overview
glasstec.03.05.06
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.04
Smelting technology for pot furnaces
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.01.09.04
Decorating lehrs
Laboratory glass
Product Details
glasstec.01.06.11
M.T. Forni Industriali S.r.l.
Löwinger GmbH, Glasbearbeitungsmaschinenbau
Ampoule and laboratory glass machines
Disposable syringe machine
Type P3/K/200-SPZ-R/S1
© 2010 Messe Düsseldorf GmbH
349
© 2010 Messe Düsseldorf GmbH
350
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.04.03
M.T. Forni Industriali S.r.l.
Smelting technology for tank furnaces
Product Details
glasstec.01.06.07
TANK FURNACES
Maquinas Argentinas del Vidrio S.A. (MAVSA)
Press machines
MAVSA Press Machines
U-Melter, gas fired, 12sqm, for clear
MAVSA Press Machines offers a complete production
range to the Worldwide Glass Tableware Manufacturers.
We also offer:
Free Press Technology Production. Ring Press Technology Production. Complete Press Line Manufacturing from the Forehearth till the Stacker Conveyor &
Press Mould Equipment. Turn Key Installation and Manteinance.
Maquinas Argentinas del Vidrio S.A. (MAVSA)
Address
San Antonio 1119
C1276ADQ Capital Federal
Argentina
Phone
+54 11 4302-9900
Fax
+54 11 4302-6002
Internet address
Maschinenbau GEROLD GmbH & Co. KG
Address
Herrenpfad-Süd 44
41334 Nettetal
Germany
www.mavsa.com.ar
Phone
+49 2157 817-0
E-Mail
info@mavsa.com.ar
Fax
+49 2157 817-100
Stand
Hall 13, C14 (Page 540)
Internet address
www.gerold-mb.de
E-Mail
info@gerold-mb.de
Stand
Hall 14, E40 (Page 548)
Product Overview
glasstec.01.06.07
Maquinas Argentinas del Vidrio S.A. (MAVSA)
Press machines
© 2010 Messe Düsseldorf GmbH
351
© 2010 Messe Düsseldorf GmbH
352
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
McGill AirClean
Product Overview
Maschinenbau GEROLD GmbH & Co. KG
Address
1777 Refugee Road
43207 Columbus, Ohio
USA
Phone
+1 614 829-1356
Fax
+1 614 445-8759
Enamel glass machines, screen printers, thermal
pressure equipment
Internet address
www.mcgillairclean.com
Laminated glass technology with foil for automotive
glass
E-Mail
tshay@mcgillairclean.com
Stand
Hall 15, D47 (Page 552)
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.02.03.08.01.01Screen printing techniques
glasstec.02.06.02
glasstec.02.09.02.02
Product Details
glasstec.01.13.02
Maschinenbau GEROLD GmbH & Co. KG
Transport and handling systems
Product Overview
McGill AirClean
Glass Machinery - Material Handling Equipment
glasstec.01.04.10
NOx control technology
In the area of conveying and handling equipment we design both
single units as well as complete line systems.
glasstec.01.04.11
Filter technologies (smoke and electrostatic)
glasstec.02.12.04
Purification of exhaust gases
Adding these units to our screen printing machines to realize
complex production lines or simply handling, stacking, aligning
flat glass are part of our daily business. Once more, automotive
glazing is the key product we are dealing with, i.e. flat glass in
preprocess lines and/or bent glass in postprocess lines.
Product Details
The following list shall serve as an overview: – Belt- and roller conveyors – Angular transfers and turn stations – Loading / unloading tables – Stacking equipment
– Shuttle transfers – Alignment stations – Inspection tables for quality assurance
Furthermore, GEROLD designs and realizes installations for automation solutions such as automatic assembly of windshields and PVB or sidelites and PVB.
Linking and handling installations for robot applications (e.g. mirror button application, soldering) are also part of this product line.
© 2010 Messe Düsseldorf GmbH
353
glasstec.01.04.10
McGill AirClean
NOx control technology
Acid Gas Control Systems
Our acid gas control systems use a variety of chemical reactions to convert acid
gas to particulate. We have patented acid gas treatment and experience controlling acid gases, sulfur oxides, hydrogen chloride, hydrogen flouride, and boric
acid. They are designed to distribute reagent effectively throughout the scrubbing chamber and maximize the reaction time for high levels of acid gas removal.
We offer both spray-dry scrubbers and dry reagent injection systems. Typical
applications include glass furnaces, boilers, and incinerators that burn municipal, hazardous, and medical waste.
© 2010 Messe Düsseldorf GmbH
354
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Merkad Makina Kalip San. Ve Tic. Ltd. Sti.
glasstec.01.06.13
Address
Gumussuyu Cad. Karacabey Sok. No:10
34020 Istanbul
Turkey
Phone
+90 212 4830710
Fax
+90 212 4830727
Internet address
www.merkad.com
E-Mail
merkad@merkad.com
Stand
Hall 14, A03 (Page 548)
Company News
08/17/2010
Merkad Makina Kalip San. Ve Tic. Ltd. Sti.
Moulds for glass production
Basket H28
Engraved
Merkad Makina Kalip San. Ve Tic. Ltd. Sti.
H-28 5inch Standart Blow Mould Holder
TOTAL QUALITY ASSURANCE FROM DESIGN TO
PRODUCTION
Glass Moulds for World Tableware Glass Industry
Product Overview
glasstec.01.06.13
Merkad Makina Kalip San. Ve Tic. Ltd. Sti.
Moulds for glass production
© 2010 Messe Düsseldorf GmbH
New type 5inch H-28 Blow Mold Holder
355
© 2010 Messe Düsseldorf GmbH
356
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
O-90 AND H28 Type Neck Ring Holder
Merkle International, Inc.
Press & Blow Moulds
Address
100 Perry Street
61036 Galena, IL
USA
Phone
+1 815 777-2100
Fax
+1 815 777-2106
Internet address
www.merkleintl.com
E-Mail
sales@merkleintl.com
Stand
Hall 13, A77 (Page 540)
Press Group
Product Overview
Merkle International, Inc.
glasstec.01.04.01
Batch charging technology
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.05.01
Float glass technique
glasstec.02.07.01
Machines and equipment for the production of display
glass
Stem Group
Stemware
Product Details
glasstec.01.04.01
Merkle International, Inc.
Batch charging technology
THE MERKLE MODULAR CHARGER
The newest in our line of state-of-the-art blanket batch
chargers offers impressive solutions to many of your
charging challenges. A small version of our Single Pan
machine, the modular charger can be made in widths
from 1-2 meters, to be used for very small furnace openings, or in sets to ac-
© 2010 Messe Düsseldorf GmbH
357
© 2010 Messe Düsseldorf GmbH
358
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
commodate any doghouse application.
MERSEN France Gennevilliers S.A.S.
Easier Handling
Address
41, rue Jean Jaurès
92231 Gennevilliers Cedex
France
Programming of Batch Distribution
Phone
+33 1 41854565
With an electronic synchronizer, multiple units can be configured to produce feed
profiles unavailable with wider units. Pan separations of 25mm give the modular
unit the ability to retain batch log formation that is otherwise available only on
larger machines.
Fax
+33 1 41854511
Internet address
www.mersen.com
E-Mail
cerberite@mersen.com
Stand
Hall 13, D62 (Page 540)
Manageable modules move into and out of position more easily than with the
larger machines.
Lower Impact of Inactive Machine
Each unit is small so that removal of one module from service has temporary
minor impact on profile and negligible effect on batch feed rate.
CONSIDER OUR OPTIONS
Product Overview
As part of our continued commitment to customizing our product for your needs,
Merkle is pleased to offer a variety of equipment options, including AC or DC
motors, controllers, air or water cooling on pan and pusher bar, center-cooler
mounting provisions, stairs, ladders, a variety of clutches or couplings, and tractive devices for positioning the unit.
© 2010 Messe Düsseldorf GmbH
359
MERSEN France Gennevilliers S.A.S.
glasstec.01.06.01
Gob feeder
glasstec.01.06.04
Bar feeder
glasstec.01.06.12
Bottle and glass container machines
glasstec.01.06.13
Moulds for glass production
glasstec.01.09.01
Transport systems
glasstec.01.09.02
Stacker systems
glasstec.01.13.01
Feeding and stacking systems
© 2010 Messe Düsseldorf GmbH
360
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
glasstec.03.04.01.02
PV system components
Product Overview
Product Details
glasstec.01.09.02
glasstec.01.13.09
Messersi’ Packaging S.r.l.
Parts for conveying, transport, packing and warehouse
technology
Product Details
MERSEN France Gennevilliers S.A.S.
Stacker systems
glasstec.01.13.09
Messersi’ Packaging S.r.l.
Parts for conveying, transport, packing and warehouse
technology
http://cgi.ebay.de/TV-Standfus-Stander-Halterung-Aluminium-U
Packaging technology and systems with PP an PET strap.
CARBON/CARBON COMPOSITES
For the strapping of palletized products with any nature and dimension
Carbon/carbon composite materials are especially used
in aircraft braking systems .
Rotating Arm Wrapping Machine
Their light weight allows them to save fuel. Maintenance costs are reduced, thanks to their resistance .
They are secure , whereas they absorb the energy released during an emergency braking sequence (an Airbus moving at a speed of 320 km/h has to stop
over a distance of 1200 m), while operating perfectly at over 1600° C.
Automatic wrapping machine for pallets with stretch polyethylene with rotating
arm RA version complete of clamping and cutting system oRotating Arm Wrapping Machinef the polyethylene.The machine is fitted with netting to protect its
perimeter, an access door and emergency limit switch. The rotation of the arm
is inverter-controlled. The upward and downward speed of the reel bearer also
occurs through the inverter. With this concept the RA wrapping machine by
MESSERSI PACKAGING reaches total flexibility.
TECHNICAL SPECIFICATIONS
Height of standard conveyance line: 500 mm
Messersi’ Packaging S.r.l.
Maximum speed of arm rotation: 28 rpm
Address
Via 1 Maggio, 3
60010 Barbara / AN
Italy
Total power installedì: 4 Kw
Standard voltageì: V400+N+T -50Hz
Protection of electrical system and motors: IP 54
Phone
+39 071 963861
Fax
+39 071 96386219
Operating pressure: 6 bar
PRODUCT DIMENSIONS
Max pallet dimension: width 1100 x length 1300 mm
Internet address
http://www.messersi.com/en/
E-Mail
exportdept@messersi.com
Stand
Hall 13, E93 (Page 540)
Min pallet dimension: width 600 x length 800 mm
Standard height: 2100 mm
© 2010 Messe Düsseldorf GmbH
361
© 2010 Messe Düsseldorf GmbH
362
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
METAL INDUSTRIEL de CHAUNY
Metavil - Empresa Transformadora Metalo Vidreira, Lta.
Address
136 avenue Jean Jaurés
02300 Chauny
France
Address
Estrada da Maceira, n°60 - Picassinos
2431-902 Marinha-Grande
Portugal
Phone
+33 3 2339-1551
Phone
+351 244 572960
Fax
+33 3 2339-1515
Fax
+351 244 572969
Internet address
www.metavil.pt
Internet address
E-Mail
ggressier@metalindustriel.com
E-Mail
metavil@metavil.pt
Stand
Hall 13, F03 (Page 540)
Stand
Hall 14, B12 (Page 548)
Product Overview
glasstec.01.06.13
METAL INDUSTRIEL de CHAUNY
Moulds for glass production
Product Details
glasstec.01.06.13
Product Overview
glasstec.01.06.13
METAL INDUSTRIEL de CHAUNY
Moulds for glass production
Metavil - Empresa Transformadora Metalo Vidreira,...
Moulds for glass production
Product Details
glasstec.01.06.13
Metavil - Empresa Transformadora Metalo Vidreira,...
Moulds for glass production
Round bars
moulds and acessories
Round bars in aluminium from Dia 20 mm to 450 mm
The products we make are essencially moulds and acessories for every kind of packing glass.
Round bars in cast iron FT25 and GS from Dia. 20 mm
Sophisticated perfumery packing moulds are included in our
products gamut.
to 400 mm
Round bars in red copper Cua1, Cub1, Cuc1
Round bars in Copper lead CuPb10,CuPb15, from Dia.30 mm to 150 mm
© 2010 Messe Düsseldorf GmbH
363
© 2010 Messe Düsseldorf GmbH
364
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
METRA
Modell- und Formenbau Ekkehart Krahl
Address
Route d´Eu
76340 Blangy-sur-Bresle
France
Address
Mühlenstr. 40
02957 Krauschwitz
Germany
Phone
+33 2 329744-00
Phone
+49 35771 69314
Fax
+33 2 329744-49
Fax
+49 35771 69315
Internet address
www.metra.fr
Internet address
www.krahl.de
E-Mail
commercial@metra.fr
E-Mail
krahl@krahl.de
Stand
Hall 13, F16 (Page 540)
Stand
Hall 13, C06 (Page 540)
Product Overview
glasstec.01.06.13
METRA
Moulds for glass production
Product Details
glasstec.01.06.13
METRA
Moulds for glass production
Product Overview
Modell- und Formenbau Ekkehart Krahl
glasstec.01.06.13
Moulds for glass production
glasstec.21.02
Special offers for glass trade / crafts
glasstec.21.03
Special offers for architects
Formen
Accessoires
Product Details
glasstec.01.06.13
Modell- und Formenbau Ekkehart Krahl
Moulds for glass production
Fertigungsprogramm
Zu unserem vielseitigen Fertigungsprogramm gehören:
Formen für die manuelle und maschinelle Glasfertigung, Werkzeuge und Vorrichtungen für die Automatisierungstechnik und Gummiformgebung. Dabei können diese aus den unterschiedlichsten Materialien bestehen, wie Gusseisen,
Aluminium, Edelstahl, Kohlenstoff, Kunststoff oder Holz. Umfangreiche Möglichkeiten
der Bearbeitung – CNC und konventionell – garantieren eine flexible und vielseitige Formenherstellung.
© 2010 Messe Düsseldorf GmbH
365
© 2010 Messe Düsseldorf GmbH
366
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Mopavid, S.L.
MOTIM Fused Cast Refractories Ltd.
Address
c/ Ramón Martí Alsina, 56
08911 Badalona
Spain
Address
Timföld u. 1
9200 Mosonmagyarovar
Hungary
Phone
+34 93 3847180
Phone
+36 96 574100
Fax
+34 93 3846850
Fax
+36 96 574235
Internet address
www-mopavid.com
Internet address
www.motim.hu/kadko/docs/start.htm
E-Mail
mopavid@mopavid.e.telefonica.net
E-Mail
fusedcast@motim.hu
Stand
Hall 13, F64 (Page 540)
Stand
Hall 10, A21 (Page 534)
Product Overview
glasstec.01.06.13
Mopavid, S.L.
Moulds for glass production
Product Details
glasstec.01.06.13
Mopavid, S.L.
Moulds for glass production
Product Overview
MOTIM Fused Cast Refractories Ltd.
glasstec.01.02.01
Refractory materials
glasstec.01.04.06
Regenerative systems
glasstec.01.04.07
Recuperative systems
Moulds for the automatic glass industry
Moulds for the automatic glas industry in Cast-iron, steel and bronze. As well as
for packaging as for flaconnage. Accessories. Own foundry.
Product Details
glasstec.01.04.07
MOTIM Fused Cast Refractories Ltd.
Recuperative systems
Heat exchangers
The waste gases produced during combustion in conventionally fired glass melting furnaces contain large amounts of thermal energy and their recovery is very
important in respect of efficiency of glass production. Various forms of heat exchangers are applied in the glass industry with good results to utilise the energy
of waste gases. Our company has been supplying AZS type heat exchangers
since 1965. They are mechanically strong and their thermal conductivity and
resistance to chemical erosion are superior to conventional refractory materials.
Heat exchanger elements are designed to give the minimum number of different
© 2010 Messe Düsseldorf GmbH
367
© 2010 Messe Düsseldorf GmbH
368
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
shapes to achieve the required construction. This provides help for the users in
designing, storing and erection.
glasstec.05.01.01.07
Measurement and control of glass tension
The shapes ensure perfect fixing of the elements and mechanical stability of the
packing.
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
glasstec.05.02.04
Controls for glass inspection machines
glasstec.05.03.02
Inspection, protocolling and diagnostic systems
glasstec.05.03.04
Process control systems
MSC & SGCC
Address
ZA des Plattes, 1 Chemin des Plattes
69390 Vourles
France
Phone
+33 4 37201500
Product Details
glasstec.01.02.04
Fax
+33 4 78079450
Internet address
www.msc-sgcc.com
E-Mail
customer.service@msc.fr
Stand
Hall 12, F18 (Page 538)
Product Overview
MSC & SGCC
Laboratory equipment
A QUICK, SIMPLE AND PRECISE DEVICE FOR GLASS
THICKNESS MEAS
Quick The AMEV (Portable Glass Thickness Measurement Device) allows instantaneous measurements of
the sidewall thickness for bottles and jars. It can be
used with stiffened bottles at the hot end, allowing the
operator to know the glass thickness, even before the
annealing lehr.
MSC & SGCC
Simple The device consists of a plate holding two rollers
as a cradle for the bottle to be measured, and a pivoting bracket holding the
probe.
glasstec.01.02.04
Laboratory equipment
glasstec.02.05.02
Laser-marking technology
glasstec.05.01.01.01
Measurement and control of glass position detection
Features: Max. room temperature: 80° C. Voltage: 220 V A.C. 50 or 60 Hz
Other voltages on request. Minimum diameter : 10 mm / Maximum diameter :
170 mm Glass thickness: Up to 5 mm
glasstec.05.01.01.04
Measurement and control of glass thickness
PROFILER: INTERNAL BORE PROFILE ANALYSER
Precise A 19’’ electronic rack displays on its front panel a gauge graduated in
millimetres and the device can be reseted by a push button.
Wine and champagne bottles The PROFILER is designed to register the internal corkage profile of wine and champagne bottles, and of all bottles having a
long neck. The PC displays the internal profile curve and stores the data on
exportable formats (ex. Microsoft Excel).
PC compatible The PROFILER is composed of: A mechanical frame to take
© 2010 Messe Düsseldorf GmbH
369
© 2010 Messe Düsseldorf GmbH
370
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
measurements A measuring head (2nd head optional) A set of connecting cables
A PC with 17” screen (optional)
High repeatability All measurements are stored on the PC which allows the visualization of the bottle internal neck profile through quick and easy settings.
MSK Verpackungs-Systeme GmbH
Address
Benzstr.
47533 Kleve
Germany
Phone
+49 2821 506-0
Fax
+49 2821 17866
Internet address
www.mskcovertech.com
E-Mail
info@msk.de
Stand
Hall 13, B31 (Page 540)
Wide range of containers Measuring heads: The device is delivered with 2 standard heads: 16 to 20 mm 17,5 to 21,5 mm
LABORATORY EQUIPMENT
AMEV: A QUICK, SIMPLE AND PRECISE DEVICE FOR GLASS THICKNESS
MEASURMENT
Quick The AMEV (Portable Glass Thickness Measurement Device) allows instantaneous measurements of the sidewall thickness for bottles and jars. It can
be used with stiffened bottles at the hot end, allowing the operator to know the
glass thickness, even before the annealing lehr.
Simple The device consists of a plate holding two rollers as a cradle for the bottle
to be measured, and a pivoting bracket holding the probe.
Precise A 19’’ electronic rack displays on its front panel a gauge graduated in
millimetres and the device can be reseted by a push button.
Product Overview
MSK Verpackungs-Systeme GmbH
Features: Max. room temperature: 80° C. Voltage: 220 V A.C. 50 or 60 Hz
Other voltages on request. Minimum diameter : 10 mm / Maximum diameter :
170 mm Glass thickness: Up to 5 mm
glasstec.01.13.01
Feeding and stacking systems
PROFILER: INTERNAL BORE PROFILE ANALYSER
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.03
Conveying, sorting and storage facilities
Wine and champagne bottles The PROFILER is designed to register the internal corkage profile of wine and champagne bottles, and of all bottles having a
long neck. The PC displays the internal profile curve and stores the data on
exportable formats (ex. Microsoft Excel).
glasstec.01.13.04
PC compatible The PROFILER is composed of: A mechanical frame to take
measurements A measuring head (2nd head optional) A set of connecting cables
A PC with 17” screen (optional)
Packing lines - boxes, shrinking, hoop-casing
machinery
glasstec.01.13.05
Warehouse technology
High repeatability All measurements are stored on the PC which allows the visualization of the bottle internal neck profile through quick and easy settings.
glasstec.01.13.07
Vehicles for glass transport
Wide range of containers Measuring heads: The device is delivered with 2 standard heads: 16 to 20 mm 17,5 to 21,5 mm
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
glasstec.05.02.01
MRP machine and transport adjustment
© 2010 Messe Düsseldorf GmbH
371
© 2010 Messe Düsseldorf GmbH
372
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.13.03
MSK Verpackungs-Systeme GmbH
Conveying, sorting and storage facilities
bringen Ruhe in den Produktionsfluss und ersparen den Staplerverkehr zwischen Palettier- und Verpackungslinien.
glasstec.01.13.04
Fördersysteme für Paletten und Ladungseinheiten
Alles aus einer Hand - Im Zusammenspiel mit vollautomatischen Palettier- und
Verpackungsanlagen arbeiten MSK Fördersysteme sicher und zuverlässig als
integriertes Transport- und Materialflusssystem, gesteuert durch die MSK Software EMSY. Erfahrene Projektingenieure erarbeiten hierzu maßgeschneiderte
Konzepte - die aufwendige Koordinierung mehrerer Projektteams bleibt unseren
Kunden damit erspart.
Branchenspezifische Kompetenz
Jedes Produkt braucht seine spezielle Fördertechnik. MSK Fördersysteme sind
seit Jahren in Bereichen tätig, in denen Durchschnittsförderer kaum eine Chance
haben. Tonnenschwere Paletten in einer Vielzahl unterschiedlicher Formate
oder instabile Ladungen sind bei uns keine Besonderheit sondern Tagesgeschäft.
Abrasive Umgebung in der Baustoffindustrie oder Höchstbelastung im 24 Stunden Dauerbetrieb in der Glashütte sind Maßstäbe, nach denen wir arbeiten und
uns über Jahre mit großem Erfolg etabliert haben.
Spezialförderer für höchste Anforderungen
Gerade die Entwicklung kundenspezifischer Sonderlösungen wie Plattenbandförderer, Vertikalförderer, Accumulierförderer, Drehteller, Eckumsetzer etc. gehört
zu unserem Engineering Know-how.
Packing lines - boxes, shrinking, hoop-casing machinery
MSK Schrumpfverpackungen-Einzigartige Lösungen
Außergewöhnliche Anforderungen an die Palettenladungssicherung
prägten in den vergangenen drei Jahrzehnten die Technik der MSK Schrumpfverpackungsanlagen. Auf der
Grundlage mehrer MSK Patente sowie in enger Zusammenarbeit mit führenden Unternehmen verschiedener
Branchen entstanden wegweisende Lösungen für branchenspezifische Anforderungen.
glasstec.01.13.05
Warehouse technology
Optimum Pallet Packaging machines for Excellent Load Stabili
The technology of packaging products for transport in the building materials industry has been characterised by numerous MSK innovations. Trail-blazing pallet packaging machines have been developed on the basis of a whole series of
MSK patents and in close co-operation with leading enterprises in the industry.
Verpackung erfordert Präzision
Bei der Förderung zu Schrumpfverpackungsanlagen wirkt sich die präzise Positionierung des Fördergutes kostensparend aus, da der Folienumfang minimiert
werden kann.
Harmonie im Detail
MSK fördert Paletten von der Produktion bis zur LKW-Verladung ohne Gabelstaplerverkehr. Die Übergabe von Paletten nach einem Förderrichtungswechsel ist eine Anforderung, der bei MSK Beachtung geschenkt wird. Das Produkt
bemerkt diesen Übergang nicht, da Trägerelemente die Palette im Übergangsbereich übernehmen. Auch hohe, unverpackte Ware oder rutschige Ladungen
kommen so sicher ans Ziel.
MSK Aufzüge und Verfahrwagen
Mittels Online-Fernübertragung von Informationsdaten an MSK Verfahrwagen
und Aufzüge können Paletten durch verschiedene Hallen und über verschiedene
Etagen transportiert werden und erreichen sicher ihr Ziel. MSK Verfahrwagen
© 2010 Messe Düsseldorf GmbH
373
© 2010 Messe Düsseldorf GmbH
374
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Nabertherm GmbH
Address
glasstec.01.09.04
Bahnhofstr. 20
28865 Lilienthal
Germany
Phone
+49 4298 922-0
Fax
+49 4298 922-129
Internet address
www.nabertherm.com
E-Mail
contact@nabertherm.de
Stand
For many years these high-quality chamber furnaces
have proven their excellent suitability for the glass industry. These models can ideally be used for cooling, bending/slumping and glass decoration.
glasstec.01.09.05
Nabertherm GmbH
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.01.09.04
Decorating lehrs
glasstec.01.09.05
Pre-heating furnaces
glasstec.01.09.06
Fusing Kiln
Product Details
glasstec.01.09.03
Pre-heating furnaces
N 4010/45 HA
Hall 09, D37 (Page 532)
Product Overview
Decorating lehrs
N 100/G - N 2200
Nabertherm GmbH
These chamber ovens are available for maximum working temperatures of 60 °C or 450 °C. They are suitable for numerous processes such as pre-heating of moulds, ageing or drying. The version suitable for temperatures up to 450 °C is recommended for Heat Soak testing of Toughened Safety Glass
(TSG). During a Heat Soak Test in accordance with EN 141791 the panes are exposed to a temperature of 290 °C for at least
four hours in order to transform nickel sulfide inclusions and
hence to prevent the pane from breaking spontaneously later. The documentation of the heat treatment process is strongly recommended. Program entry,
visualization and the documentation of the process are achieved by means of
the PLC-control in combination with the powerful Nabertherm Control Center
(NCC), which registers and archives the temperatures at different measuring
points on the pane. The 260 °C ovens can also be used for production of Laminated Safety Glass (LSG). During this process two panes are bonded using a
laminating foil and entered into the oven inside a vacuum bag. From outside
the furnace a vacuum is generated via hose connection in order to avoid air
inclusions between the panes during the heat treatment.
Annealing lehrs, continuous/intermittent operation
N 15/65HA, N 30/45HA - N 500/85HA
glasstec.01.09.06
These chamber furnaces with air circulation are characterized
by their extremely high temperature uniformity. Hence, they
are especially suitable for processes such as cooling, crystalizing, pre-heating, curing, but also for numerous processes in
tool making. Due to the modular concept, the furnaces can be
adjusted to the process requirements by adding suitable equipment.
GFM 420 - GFM 1050
© 2010 Messe Düsseldorf GmbH
Fusing Kiln
The GFM series was developed to meet the special
requirements of production. For different applications
different table depths can be supplied. Standard tables have a depth of 65 mm for fusing. Various tables
and tubs with different heights and numerous additional
equipments are available as system add-ons. Especially economical is the al-
375
© 2010 Messe Düsseldorf GmbH
376
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
ternating table system, in which one table is loaded while the other one is in the
furnace.
New Hudson Corporation
Address
57077 Pontiac Trail
48165 New Hudson, MI
USA
Phone
+1 248 437-1701
Fax
+1 248 437-0420
Nanjing Xinshu Machinery Co., Ltd.
Address
No. 205, Mufu East Road Nanjing
210028 Nanjing
China (Rep.)
Phone
+86 25 85516714
Internet address
www.newhudson.com
Fax
+86 25 85516714
E-Mail
jduprey@newhudson.com
Internet address
www.sgglass.com
Stand
Hall 13, A44 (Page 540)
E-Mail
xinshujixie@sina.com
Stand
Hall 13, E72-1 (Page 540)
Product Overview
glasstec.01.06.08
Nanjing Xinshu Machinery Co., Ltd.
Press-blow-machines
Product Details
glasstec.01.06.08
Product Overview
Nanjing Xinshu Machinery Co., Ltd.
Press-blow-machines
New Hudson Corporation
glasstec.01.05.01
Float glass technique
glasstec.01.05.03
Casting and rolling technology
glasstec.01.09.01
Transport systems
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
Product Details
New Hudson Corporation
BHB30 BURNOFF
glasstec.01.05.03
The BHB30 Burnoff is used for forming machining
of tableware line.The BHB30 is used with the BH12
Press&Blow and it also can fit other machine well. The
BHB30 use synchronous drive system to keep synchronization with product line.
Casting and rolling technology
FF800 (MB 800)
New Hudson Corporation has manufactured covered rollers for the float glass
industry since 1964. New Hudson was a pioneer in the development of Non Asbestos covered lehr rollers beginning in 1979. Since that time, New Hudson Corporation has manufactured several thousand non-asbestos covered lehr rollers
for over (84) float glass plants worldwide.
FF800 (MB 800)
Covered lehr rollers are very common in the flat glass industry-typically used in
© 2010 Messe Düsseldorf GmbH
377
© 2010 Messe Düsseldorf GmbH
378
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
the B, C, D and RET zones of the annealing lehr. The most frequently used covering material is Tenmat’s FireFly 800 (MB 800). Introduced in 1981, a mineral
fiber millboard product, FireFly 800 has a long history of successful performance
in the float glass industry.
Covered rollers are non-marking, have less affinity for sodium sulfate and dross
deposits and provide excellent dimensional stability in the lehr. The primary
disadvantage of covered rollers is the occurrence of embedded cullet and vulnerability to cullet damage. The primary types of covering materials are mineral
fiber and alumina silicate fiber.
Nikolaus Sorg GmbH + Co. KG
Address
Stoltestr. 23
97816 Lohr am Main
Germany
Phone
+49 9352 507-0
Fax
+49 9352 507-196
glasstec.01.04.08
Electrically heated systems
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
glasstec.01.04.10
NOx control technology
glasstec.01.04.13
Feeder colouring
glasstec.05.01.01.01
Measurement and control of glass position detection
glasstec.05.01.01.05
Measurement and control of glass temperature
glasstec.05.03.04
Process control systems
glasstec.06
Contracting, consulting, engineering, services
Product Details
Internet address
www.sorg.de
E-Mail
nsorg@sorg.de
Stand
Hall 15, B37 (Page 552)
glasstec.01.04.03
Although many of our installations are similar (for instance, large regenerative
end-fired furnaces for containers) there is always something interesting being
built somewhere (we have over 250 furnaces operating and customers in more
than 65 countries). You will always find the latest interesting installations mentioned here.
Nikolaus Sorg GmbH + Co. KG
glasstec.01.04.02
Forehearth technology
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.06
Regenerative systems
glasstec.01.04.07
Recuperative systems
© 2010 Messe Düsseldorf GmbH
Smelting technology for tank furnaces
Latest installations
glasstec.01.04.07
Product Overview
Nikolaus Sorg GmbH + Co. KG
Recuperative systems
Neue Technologie
Einer der bemerkenswertesten Aspekte in der jüngeren Geschichte der Firma
SORG ist die Entwicklung neuer Technologien (z.B. der LoNOx® Melter, der
FlexMelter®, das Vorherd CONTI-DRAIN®-System) – was nicht auf viele Lieferanten der Glasindustrie zutrifft. Obwohl es solche Entwicklungen nicht regelmäßig
gibt, sind wir stets um Innovationen bemüht. Schauen Sie deshalb auf diese
Seite, wenn Sie mehr über die neuesten Entwicklungen wissen möchten.
379
© 2010 Messe Düsseldorf GmbH
380
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
PLUS Label Maker : Bar Code Labeling & Tracking solution
Nirvana Technologies (P) Ltd.
Address
A3/492, Sahakar Nagar, Part 2, Chembur
400 071 Mumbai
India
Phone
+91 22 21661600
Fax
+91 22 39167297
Internet address
www.nirvanatec.com
E-Mail
info@nirvanatec.com
Stand
Hall 15, A13 (Page 552)
Product Overview
Nirvana Technologies (P) Ltd.
glasstec.01.10.01
Optimization of glass cutting and glass production yield
glasstec.02.13.02
Software
glasstec.05.03.01
MRP/CAD/CIM systems
glasstec.05.03.03
Optimization systems for cutting and yield
glasstec.21.03
Special offers for architects
Product Details
Company News
09/17/2010
Nirvana Technologies (P) Ltd.
Special Exhibition Offer for Glasstec 2010
glasstec.01.10.01
Nirvana Technologies (P) Ltd.
Optimization of glass cutting and glass production yield
PLUS 2D - Glass Optimization Software
PLUS 2D - Glass is efficient glass cutting optimization
software, ideal for producers, processors and fabricators. It has an intutive well designed modern user interface which is simple yet powerful. Whether you are
cutting manually or using a CNC cutting table, PLUS
2D generates optimum cutting patterns at the click of
the button.
Nirvana Technologies is pleased to announce a Special Exhibition offer during Glasstec 2010, Düsseldorf,
Germany.
All visitors who participate in a demo session will be
eligible for discount coupons that they can collect at
the Booth (Hall 15, A-13). In addition our engineers
will be pleased to take you through a test drive of our
software, and answer any queries you may have.
Please visit the following URL for more details on our products… www.nirvanatec.com/products.html
Nirvana Technologies provides complete suite of optimization solutions for glass
industry. Of these the following producuts will be on demonstration during the
exhibition.
PLUS 2D Glass : Optimization Software
PLUS 1D : Bar nesting software for profiles and extrusions
PLUS Glass Manager : Order Processing and Inventory Management Software
PLUS Replicam : Digitizing software to replicate templates
© 2010 Messe Düsseldorf GmbH
381
© 2010 Messe Düsseldorf GmbH
382
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
machine parts - Resistant to oil, grease and most chemicals; unaffected by dust,
dirt or moisture
Norddeutsche Seekabelwerke GmbH
Address
Kabelstr. 9-11
26954 Nordenham
Germany
Phone
+49 4731 821294
Fax
+49 4731 822294
Internet address
www.secaflex.com
E-Mail
belts@nsw.com
Stand
Main features: - Made of polyurethane elastomer Shore hardness: 92°A - Longitudinal tension members
provided by various versions of steel or aramid cords
SECAflex® timing belts, as a refinement of the SECA line, have the same basic
properties but are specially designed for high-performance power transmission
and special conveying applications.
Norddeutsche Seekabelwerke GmbH
Parts for conveying, transport, packing and warehouse
technology
Product Details
glasstec.01.13.09
SECA® timing belts are available as long length version
and as welded endless belts. They are used in synchronous conveyor systems, to provide timing for linear motion or in power transmission systems. They are
suited to welding cleat sections and for various types of
back covering.
Hall 14, E17 (Page 548)
Product Overview
glasstec.01.13.09
SECA® and SECAflex®
Norddeutsche Seekabelwerke GmbH
Parts for conveying, transport, packing and warehouse
technology
Main features: - Made of polyurethane elastomer - Shore hardness: 92°A - Longitudinal tension members provided by various versions of steel cords - Manufactured as truly endless belts without a weldet joint and consequently: - Maximum performance – maximum power transmission
North American Refractories Company
Address
400 Techne Center Dr., Suite 208
45105 Milford, OH
USA
Phone
+1 412 375-6609
Fax
+1 412 375-6846
Internet address
www.hwr.com
E-Mail
jbeglinger@anhrefactories.com
Stand
Hall 13, C49-2 (Page 540)
Profile Belts
NSW profile belts stand out because of their high tensile strength abrasion resistance. Their comprehensive range of standard products covers a broad spectrum of applications in industry - from woodworking machines, glass and tile
transport systems all the way to packing machines. We keep you moving with
three basic types of profile belts: round belts, V belts and wedge V belts. We
offer all three profile belts in a variety of sizes, with and without reinforcements.
Additional product versions, individual special profiles and sizes complete the
range of products.
Main features: - Made of polyurethane or polyester elastomer - Available in four
different Shore hardness values (85°A, 87°A, 92°A and 100°A) - They can be
connected quickly and easily, even directly into systems without disassembling
© 2010 Messe Düsseldorf GmbH
383
© 2010 Messe Düsseldorf GmbH
384
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Overview
glasstec.01.02.01
North American Refractories Company
Refractory materials
Product Details
glasstec.01.02.01
North American Refractories Company
Refractory materials
North American Refactories Co.
Application of EMISSHIELD® in Heat Treating Furnaces Unlike the use of insulating materials that have predictable performance characteristics under steady
state conditions, the benefits of using EMISSHIELD® depend greatly upon furnace design and operating parameters. Uncoated refractories have emissivities, Ew, in the range of 0.3-0.5 at heat treating temperatures. The application
of EMISSHIELD® to the refractory increases the emissivity of the refractory to
about 0.9. This means that about 90% of the energy absorbed by the coating is
re-radiated to the cooler furnace load. The emissivity of the load dictates how
much radiant heat will be absorbed. Referring to the equation in the previous
column, it is easy to see that by increasing the Ew of the refractory, the heat
absorbed by the furnace load, Q, will increase significantly. This is not desirable
where carefully-controlled heat treatments must be maintained, so something
else in the equation must be reduced to compensate for the increase of Ew,
while maintaining a constant Q. The factor that must be reduced to maintain a
constant Q is the temperature, and this is accomplished by turning down the
burners. Of course, when the burners are turned down, fuel savings are gained.
In practice, the best way to adjust the burners to compensate for the increase
in heat absorption by the parts being treated is to locate the furnace control
thermocouple adjacent to the parts. Figure 4 shows the ideal thermocouple
location for a casting being annealed. This thermocouple placement will automatically maintain the desired temperature of the furnace load by adjusting the
burners to achieve the set point temperature. If the control thermocouple were
located much further from the load, it may read a lower temperature from the
coated refractories and call for more heat, potentially overheating the parts being heat treated. It is possible to use a remotely-located control thermocouple
in an EMISSHIELD®-coated heat treating furnace when necessary; however,
a means must be devised to correlate the load temperature before the EMISSHIELD® was applied to the temperature of the load after the installation of the
coating. An optical pyrometer or other remote temperature measurement instrument could be used to insure that the temperature of the materials being treated
remain at the desired temperature while new, lower burner settings are being
established. The greatest energy savings will be realized in furnaces that are
© 2010 Messe Düsseldorf GmbH
385
heavily loaded. Ideally, the surface area of the EMISSHIELD®-coated refractory should approximate the surface area of the furnace load. Large furnaces
containing small loads are not good candidates for coating with EMISSHIELD®.
Small furnaces do not realize significant benefits when coated, regardless of
the load. Furnaces that remain empty for long periods of time between loads
should not be coated with EMISSHIELD®. If an empty coated furnace is held
at temperature long enough, an increase in fuel usage may result. The EMISSHIELD® will still absorb more energy, but without a load to re-radiate to, this
additional energy will be lost by increased conductance through the refractory.
Generally speaking, the greater the thermal work being done in a heat treating
furnace, the greater the potential fuel savings. This result is assured by applying
EMISSHIELD® to large, fully-loaded furnaces.
NovoCOS GmbH
Address
Veynaustr. 2a
53894 Mechernich
Germany
Phone
+49 2256 95749-0
Fax
+49 2256 95749-99
Internet address
www.novocos.de
E-Mail
info@novocos.de
Stand
Hall 13, F54 (Page 540)
Product Overview
glasstec.01.02.01
NovoCOS GmbH
Refractory materials
© 2010 Messe Düsseldorf GmbH
386
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.02.01
NovoCOS GmbH
Refractory materials
OCL India Limited
Address
Rajgangpur
770 017 Orissa
India
Phone
+91 6624 221212
Fax
+91 6624 220133
Glass Furnace Repairs
Extend the lifetime of your glass-furnace by using NovoCOS technologies and
services.
Our services: supply of premium quality by using NovoCOS
ceramic-welding-processnewly developed cleaning technologyinspection-service
(endoscope/video)refractory cutting by water cooled chainsawadditional technologies tap and drain
Internet address
www.ocl.in
NovoCOS offers CERAMIC-WELDING as the main repairing technology for the
superstructure of glass furnaces and is principally used for areas, such as:
E-Mail
sunilkumar@ocl.in
dog-house supports and archesport-necksbackwall-crownstuckstonesmelter-crown,
skew lines and breast-wallsmelter and regenerator arches
Stand
Hall 13, F43 (Page 540)
NovoCOS uses ceramic-welding-materials, similar to the refractory material of
the area to be repaired.
Other repairing areas: beside the superstructure of the glass furnace, the servicepackage of NovoCOS includes also technologies foreseen for services at other
areas, e.g. for the bottom.
Customer benefit: The services will be executed through highly qualified, skilled
and experienced technicians. Our customers benefit from our offer because of
the following characteristics :
long-term solutionsmaximum economic advantagesemergency supportabsolute
professional job-executionminimum of downtime and production losses
Product Overview
glasstec.01.02.01
OCL India Limited
Refractory materials
Product Details
glasstec.01.02.01
OCL India Limited
Refractory materials
Glass Melting Tank
Glass melting furnaces, particularly of high pulling rate,
are lined with various high quality refractories.Most
glass manufacturers have been preferring super duty
Silica Bricks for the crown because crown constructed
with Super Duty Silica Bricks can be insulated, resulting
in saving of 10-12% input energy.The advantage of Super Duty Silica bricks over conventional quality is due to its low Alumina, Titania
& Alkali content, its high P.C.E. value, high resistance to penetration of Alkali
vapour encountered during furnace operation & volume stability at furnace operating temperature.
OCL India has experience of over four decades for the manufacture of High Duty
Silica bricks having very low flux factor & residual quartz.These bricks are having
very high refractoriness under load & shows excellent volume stability at service
© 2010 Messe Düsseldorf GmbH
387
© 2010 Messe Düsseldorf GmbH
388
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
temperature.
OFFICINA MECCANICA SESTESE S.p.A.
Address
Via Borgomanero, 44
28040 Paruzzaro (No)
Italy
Phone
+39 0322 541411-1411
Via Venezia Giulia 7
20157 Milano
Italy
Fax
+39 0322 230046-1440
Internet address
www.omsspa.it
Phone
+39 02 3909-181
E-Mail
oms@omsspa.com
Fax
+39 02 3570-944
Stand
Hall 13, E81 (Page 540)
Internet address
www.ocmigroup.com
E-Mail
info@ocmigroup.com
Stand
Hall 13, E13 (Page 540)
OCL’s Silica insulating bricks have very low thermal conductivity which results
in excellent thermal insulation.
OCMI-OTG S.p.A.
Address
Product Overview
glasstec.01.13.04
OFFICINA MECCANICA SESTESE S.p.A.
Packing lines - boxes, shrinking, hoop-casing
machinery
Product Details
Product Overview
glasstec.01.06.11
OCMI-OTG S.p.A.
Ampoule and laboratory glass machines
Product Details
glasstec.01.06.11
glasstec.01.13.04
OFFICINA MECCANICA SESTESE S.p.A.
Packing lines - boxes, shrinking, hoop-casing machinery
Strapping MODEL 031 M
OCMI-OTG S.p.A.
Fully automatic strapping machine with belt driven top table
Ampoule and laboratory glass machines
F.A.36 Ampoule Forming Machine
Continuous-action rotary machine with 36 vertical spindles
for forming ampoules from glass tube.
© 2010 Messe Düsseldorf GmbH
389
© 2010 Messe Düsseldorf GmbH
390
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Thermoshrinking MODEL DUO AT53
Product Overview
Automatic combined machine for hooding and thermoshrinking
Olivotto Glass Technologies S.p.A.
glasstec.01.06.01
Gob feeder
glasstec.01.06.06
Blowing machines
glasstec.01.06.07
Press machines
glasstec.01.06.08
Press-blow-machines
glasstec.01.06.09
Spinning machines
glasstec.01.06.10
Injector machines
glasstec.01.06.11
Ampoule and laboratory glass machines
glasstec.01.06.14
Flash welding and fire polishing machines
glasstec.01.07
Equipment for glass tube production
glasstec.01.13.02
Transport and handling systems
glasstec.02.01.01.03
Cutting technology for technical glass
glasstec.02.01.05
Sawing machines and rim polishing machines
glasstec.05.01.01.04
Measurement and control of glass thickness
glasstec.05.03.04
Process control systems
glasstec.06
Contracting, consulting, engineering, services
Wrapping MODEL AV750
Automatic stretch Wrapping Machine
Olivotto Glass Technologies S.p.A.
Address
V.le Gandhi, 22
10051 Avigliana TO
Italy
Phone
+39-011-9343511
Fax
+39-011-9343592
Internet address
www.olivotto.it
E-Mail
info@olivotto.it
Stand
Hall 13, D05 (Page 540)
© 2010 Messe Düsseldorf GmbH
391
© 2010 Messe Düsseldorf GmbH
392
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.06.01
Olivotto Glass Technologies S.p.A.
Gob feeder
• Plunger:
- motor drive
- cam drive
F & NEF gob feeders
• Refractories: suitable to fit with standard refractories and combustion equipment
Olivotto is now proposing the latest generation of Electronic Feeder family (NEF type) designed to feed all the
range of forming machines from presses to spinning to
press and blow and blow-blow machines.
Options
The NEF models are electronically operated. They
have a modular construction: either the plunger, the shears and the rotating
tube can be supplied as stand alone mechanisms or integrated in a complete
package.
The electronic equipment is based on the latest PLC technology allows a very
high precision control loop providing excellent performances and an elevate degree of accuracy even at very high speed. Both plunger and shears are controlled by means of electronic cams. The operator can modify the shape of the
plunger cam simply watching at it displayed on the monitor and pressing the
error keys on the keyboard.
The F models are mechanically operated: a synchronous motor, through a gear
box, drives shears and plunger cams while a second motor drives the rotating
tube.
Main Features
• Speed range: 3 to 200 cuts/min
• Gob Weight range: 20 grs. To 12 Kg.
• Suitable for Single, Double, Triple gob run
• Stirrers
• Automatic electric adjustment of tube height
• Plunger Rotation for low speed production
• Serial interface with host computer
• GWC (Gob Weight Control)
OLIMERK
OLIMERK’ s present production scope includes the
following machines, developed in collaboration with
Olivotto Glass Technologies and complementary to its
range of products:
Semi-automatic press machines Automatic turntable
press machines for low speed production loaded by
ball gatherer Rotary fire polishing machines combustion
equipment suitable for gas / oxygen burners for low speed production Handling
& conveying system (conveyors, transfer, stacker, etc) Semi-automatic spinning machines Automatic turntable spinning machines for low speed production
loaded by ball gatherer
Technologies, product and service coming from the best know-how of LINDNER
with large experience for High quality production in all types of glass ( lead crystal, soda-lime, borosilicate ).
• Shears:
- parallel type motor drive
- polar type with motor drive
Miscellaneous :
- cam drive
- pneumatic drive
© 2010 Messe Düsseldorf GmbH
393
© 2010 Messe Düsseldorf GmbH
394
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Stirrer Mechanism for Forehearths. Graphite Bearings for Revolving tube
Feeder mechanism Delivery Chutes ( Scoop, Trough and Deflector) Shears
Blades Ovens for Moulds Preheating and for Blow Moulds Paste Treatment
Maintenance service for any kind of Feeder mechanisms, Press machines and
Spinning machines.
glasstec.01.06.06
Blowing machines
The LC, large container blowing machine, has been designed to produce automatically huge containers (up to
64 lt) performing a patented high efficient three steps
process.
Production
E & L series blowing machine
Olivotto Glass Technologies is the leader Company in
the production of blow-blow machine. The E series,
which features the complete electronic process control,
has been in production for more than 15 years and it
has been the natural evolution of the T series, mechanical blowing machine, previously produced in over 200
units. The already complete range has been recently integrated with the well
known series of LINDNER blowing machines.
Productions
Lighting bulbs High pressures lamps Tumblers High quality stemware Laboratory wares Borosilicate pots
Main features
Complete electronic process control (no mechanical cams) Electronic control of
the movement of each single head Possibility of setting the parameters either
differently on each single head or globally Possibility of using only one section to
test new production parameters Possibility of saving the production parameters
in dedicated menus with quick loading functions Easy and quick job changes
Minimization of down-time for machine maintenance User friendly machineoperator interface Thermally conditioned cooling circuit of sucker Possibility of
choosing among rotary turrets of different sizes for different article sizes Possibility of choosing among different blowing head models for different article sizes
Possibility of installing openable working tables Up to 4 blowing pressures available Vacuum available on the machine, if required Synchronous sub-stations for
stem sealing, if required
© 2010 Messe Düsseldorf GmbH
LC large container blowing machine
395
containers for alimentary industry (water, wine, olive oil,
vegetables, alimentary preserves) containers for chemical products (acids, solvents, reagents)
Main features
accurate and precise control of the forming process high quality of the products:
the automatic process eliminates all the limits coming from the manual or even
semi-automatic production heavy reduction of production costs: the accurate
process control gives the chance of blowing containers with thiner walls, that
means lighter gobs high process repeatibility: as the LC machine is fed with
ANTAS F20 gob feeder, the gob weight is steadily kept under control easiness
of installation: LC is designed to be introduced downstream furnaces feeding
I.S. lines easiness of maintenance and run for operators experienced with I.S.
machines
The patented process consists of three steps: blank, intermediate and blow
mould. Such arrangement allows a precise control of the glass expansion along
the whole cycle. Furthermore, as the final expansion is the longest operation of
the cycle, the third mould has been duplicated, so as to have a higher efficiency
of the complete line.
Technical parameters
Production rate: 2 to 8 articles/min Typical daily pull: 15 to 25 tons Available as
single section (LC/1) Fed by gob feeder, maximum gob weight 12 kG Electronic
integrated control system ANTAS model ASYS3000 providing motor synchronisation and timing of all mechanisms Maximum article sizes: body diameter 460
mm, mouth diameter 150 mm, height 750 mm (higher heights as option)
© 2010 Messe Düsseldorf GmbH
396
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
T36E bulb blowing machine
Olivotto Glass Technologies is the leader Company in
the production of blow-blow machines. The T36E electronic blowing machine, featuring complete electronic
process control, is the natural evolution of the mechanical T series and it has been developed mainly for the
production of lighting bulbs in sodalime glass. In addition, the machine can be
used for the production of bulbs in borosilicate glass for special applications.
The T36E is equipped with 36 blowing heads and can operate either with 36 or
18 working heads. (to produce bulbs with large diameter)
With the merging of technical experience of ANTAS,
LYNCH and LINDNER the Olivotto Glass Technologies
Group is today the largest producer of presses in the
world.
Olivotto Glass Technologies can supply any type of automatic presses for any type of glass and application,
with dedicated devices and state-of-the-art driving systems, pressing and handling mechanisms.
Application range and speeds
Productions
Lighting bulbs in sodalime glass Special Lighting bulbs in borosilicate glass
- Very High Speed fully automatic presses in single, double, triple and quadruple
gob (production speed from 10 to 200 pcs/min)
Main features
Complete electronic process control (no mechanical cams) Electronic control of
the movement of each single head Possibility of setting the parameters either
differently on each single head or globally Possibility of using only one section to
test new production parameters Possibility of saving the production parameters
in dedicated menus with quick loading functions Easy and quick job changes
Minimization of down-time for machine maintenance User friendly HMI Water
cooling circuit for sucker Electronic synchronization between rotary gob distributor and machine turret
- Fully automatic presses for medium and low speed (production speed from 10
to 80 pcs/min)
- Semi automatic presses for small production lots (production speed from 1 to
20 pcs/min)
Range of Products
Tumblers Mugs Stems Plates General Tableware Giftware Vases Glass Blocks
Glass Insulators Lenses Reflectors Washing Machine Windows CRT
Machine configurations
glass: sodalime - borosilicate gob loading: servo-controlled rotary gob distributor
gob weight: max 250 g working with 36 heads - max 450 g working with 18 heads
working tables: solid (fixes) take-out: by moil breaking article diameter: max 95
mm working with 36 heads - max 125 mm working with 18 heads
Range of Glasses
Soda-Lime Borosilicate Lead Crystal Barium Crystal Opal
Driving Systems
glasstec.01.06.07
Press machines
Geneva Wheel (type PV-ANTAS) Servo Drive Gear System (Type LP-LYNCH)
Torque Motor (Type GDS-ANTAS) Mechanical Cam (Type 200-LINDNER)
Automatic Press Machines
Forming, Handling and conrol equipment
© 2010 Messe Düsseldorf GmbH
397
© 2010 Messe Düsseldorf GmbH
398
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
STR/BO and STM
take-Out: linear and rotating, pneumatic and servo motor driven Pressing Ram:
pneumatic and electric Split Mould Equipment: for single and double gobs, cam
and pneumatic driven (ISME) Electronic control: latest generation PLC electronic control system with dedicated user-friendly operator interface Moulds and
Glasses Temperature Control System: cooling and heating devices dedicated to
all specific applications, automatically timed and controlled to keep stable thermal conditions
The stretcing process allows the production of finished
”one-piece” stemware at high speed and efficiency, just
using forming machine, so only one forehearth. This
is an high speed line, that allows the production of
medium quality stemware (compared to the other process), mainly in sodalime glass with a simple stretching
process.
Press Machine Retrofitting
One of the important services that olivotto Glass Technologies Group can actually offer, is the retrofitting and the conversion to the latest technology of any
type of old LYNCH, ANTAS and LINDNER presses. All this conversions have a
minimum impact and a very fast return of investment, since they are immediately
improving speed and efficiency of the production line avoiding also the risk of
failure of components no more available on the spare market.
The traditional line configuration for this process features:
Driving System Converted to Ring Gear Servo Drive (LYNCH development)
Olivotto Glass Technologies has developped an innovative machine for this process in substitution of the last two above, with the main goal of improving the
final quality of the stretched wares and increasing the total line efficiency (reducing the number of ware transfers from three to two machines and problems
coming from the thermal conditioning).
Retrofitting of driving system of MDP, PGT and Barrel cam LYNCH Presses with
serco motor ring gear drive has been already performed on tenth of presses with
very important speed and efficiency improvement. By modifying the Geneva
and installing our Ring Gear Servo Drive System, the machine allows for useddefined number of stations moved per index versus Geneva systems that require
stopping at every station on the table and an higher speed. Ring Gear Servo
Drive System has proven reliability and lower operating costs than Geneva Cam
designs. This machine was also tested at 75 cuts per minute (12 mould positions) and maintained a stable profile during the entire index period. All table
load tests were completed at 40% of the servo motor’s capacity to simulate a
table load of 1.3 metric tons of mould weights.
In case of ANTAS presses, being the presses already equipped with the high
speed Quick Index System, the retrofitting with innovative Torque Motor Technology: GDS (Gearless Driving System) is suggested when flexibility in the selection of the number of stations is required (i.e 6 or 12).
A O’90 press and blow machine 6, 12 or 18 sections, for the production of footedware A STM machine 18 or 36, for the stretching of operation A BO machine
18, 30 or 36 heads, for the moil cutting operation
In this case the line configuration will be:
A O’90 press and blow machine 6, 12 or 18 sections, for the production of footedware A STR/BO machine 18, 36 or 44 heads (fully electronic type or mechanical
type) for the stretching of the footedwares and the following burn off cutting of
the moils
The choice of the line configuration depends mailny on the percentage of
stretched stemwares each customer intends to produce with the line: the
STR/BO should be chosen in case of high ratio of stemwares production (more
than 60%), while the two machines configuration should be used for lower ratio.
This line has a production speed that can very from 30 to 70 finished stemware
per minute (gross production rate); however, these values depend on the configuration of the forming machine and on the shape of the produced wares.
glasstec.01.06.08
Press-blow-machines
H28
© 2010 Messe Düsseldorf GmbH
399
© 2010 Messe Düsseldorf GmbH
400
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
O.90 press and blow machines
The H28 Press & Blow machine is the largest worldwide
used mechanical press and blow tableware forming machine. Customers globally have relied on the H-28 for
their reliability, ruggedness and simplicity to use. Olivotto Glass Technologies Group is still offering this historically PATENTED machine, in its standard mechanical configuration, to all the customers that still prefer,
for tradition and operators experience, continue on this
well know track.
thanks to their complete electronic process control,
semplicity of operation and easy maintenance, the olivotto Glass Technologies O.90 machines have gaigned a
leading position in the press and blow market and more
than 30 lines have been installed starting from 1990. Its
reliability and its high quality performances established
the O.90 machine as a successful primary tool for the
production of pressed and blown tableware, both in sodalime glass and lead crystal.
For customer looking for more advanced and latest technology configuration as:
electronic cams substations larger and tall items production
Production
Olivotto Glass Technologies is proposing the O’90 machine.
Tumblers Bowls for stemware Vases
Main Features
Olivotto Glass Technologies Group can provide a complete technical package,
including after-sales support. This service covers process control, replacement
parts, updating modifictations, overhaul and refirbishment.
Sample Products
Paste Mould hot Mould Footed Ware Seamless Ware Lead Crystal Ware
Current Features 6, 12 or 18 section Cam setting changes during operation from
computer console Quick job changes Continuous rotary motion machine Electronic Driver Control Synchronization with brushless motor for speed regulation
Automated ware reject system
complete electronic process control (no mechanical cams) electronic control of
the movement of each single head possibility of setting the parameters either
differently on each single parameters possibility of using only one section to test
new production paramenters possibility of saving the production parameters in
dedicated menus with quick loading functions easy and quick job changes minimization of down-time for machine maintenance user frinedly machine-operator
interface possibility od installing synchronous sub-stations (block mold, special
bottom, 3 or 4-parts molds, footed-ware)
PBB RP press blow blow machine - rotating parison
Additional Feature
Stretching machine capability Hot Mould Cooling System Tall & Footed Ware
System
The PBB machine combines the experience acquired by
Olivotto Glass Technologies in different fields such as
blowing process and press and blow process.
The PBB RP machine combines the advantages of the
Press and Blow process (high production speed, use of
substation) and the Blowing process (thin wall thickness,
higher ware quality). The Pressing Unit, where the glass
gob coming from the feeder is falling inside the Blank Mould and it is pressed by
© 2010 Messe Düsseldorf GmbH
401
© 2010 Messe Düsseldorf GmbH
402
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
the Plunger. The Parison is formed and hold by the Rotating Neck Ring to be
transferred to the Blowing machine.
machine can be also used, just re-programming and re-arranging the machine
set-up, as a normal press with 9 stations, in case the pitcher production is not
required. Production speed and article size are as per TT machine.
Production
The machine can be equipped with
Tumblers Stemware (sealing and stretching) Vases
Servo index Gear Driving System Geneva Wheel Gearless Driving System (GDS)
Pneumatic/Electric or Hydraulic Ram Pneumatic or Servo Take-out Lip Former
Main Features
complete electronic process control (no mechanical cams) maximum flexibility
in terms of range and size of the articles possibility of installing a dedicated
gob loading system for production of narrow-neck bottles possibility to produce
stemwares with the sealing and stretching process directly on the PBB RP machine, obtaining a smooth junction among bowls and stems electronic control
of the movement of each single head possibility of setting the parameters either differently on each single head or globally possibility of saving the production parameters in dedicated menus with quick loading functions easy and quick
job changes minimization of down-time for machine maintenance user friendly
machine-operator interface
TT pitchers press & blow machine (TT or 2 IN 1)
Self-diagnositc feedback Sample testing Separate servo drive for each table
The customer is provided with greater flexibility in processing and greater indexing speed leading to increase production to meer market demands.
Press Only Operation
The Twin Table machine can be operated as a press only. The blank mould table
will have (8) mould stations to accomodate pressed only articles. The 10 station
blow table will not be required for this process. motion for all blow required
equipment would be disabled during the press only operation.
glasstec.01.06.09
Pitchers production with TT
The Twin Table is a press and blow machine with 8 blank mould and 10 blow
moulds on separate tables. Glass is fed into a blank mould on the first table and
a pareson is formes. The pareson is then transferred to a blow mould on the
second table, and the article is blown into the finished shape. A high precision
servo transfer is used to transfer the pareson between the two table. TYhe Twin
Table machine is already suited for producing complex articles. Mould capacity
on the blank table, when producing blown articles, is 8 Blank moulds with 26”
(660mm) mould radius on the press table, and 10 Blow moulds with 34” (660mm)
mould radius on the Blow table. Each table has a separate drive system.
Pitchers production with 2-in-1 machine
This machine allows to rpoduce jugs with press and blow process on one-table
machine. The same number of press and blow moulds are alternatively arranged
on an indexing table. The machine is available with 2 x 9 = 18 stations (moulds).
The glass gob is fed into one of the press moulds, and after the indexing table has
switched on, is pressed as a parison in the next station. The upper part of the jug
and the handle are finished, and the lower part is pre-shaped. Across several
stations the upper area is cooled down to such a degree that a take-out can
remove this glass part from the parison mould into a blow mould located on the
same table but on the adjacent section. The indexing table continues to run, and
blowing of the lower part of the glass part is finished in the next stations, and the
jug as a whole is cooled down so that it can be removed from the machine. The
© 2010 Messe Düsseldorf GmbH
All the three available driving systems provides the following capabilities on both
tables.
403
Spinning machines
CM spinning machine
Olivotto Glass Technologies has developed a new generation of versatile spinning machines, available in different sizes so as to respond to any market requirement.
Two parameters are the most important in the spinning
process.
They are: 1) Speed profile of the chuck (that is of the mould) 2) Mould temperature management.
Thanks to our powerful electronic control, Olivotto Glass Technologies CM spinning machines achieve excelent results because of the accurate control of these
two parameters. The speed profile of each mould is independently adjusted
by the operator by means of a keyboard, and then the computer automatically
checks the actual value with the programmed one, providing automatic adjustments, whenever necessary.
© 2010 Messe Düsseldorf GmbH
404
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Production (in opal and soda-lime glass)
Complete electronic process control Possibility of saving the production parameters in dedicated menus with quick loading functions Minimization of down-time
for machine maintenance User friendly HMI In-line gauging systems for tube
diameter and wall thickness (for sorting or blowing regulation) Off-line gauging
equipment to mesure tube diameter, wall thickness, bow, siding and ovality Cold
end equipment for Vello lines
Dishes Bowls Lightingware
Standard configuration
Main Features
Gas-heated muffle (either with lip-block or spout technology) Danner machine
Air blowing unit Forming chamber Cooling runway Diameter gauging device for
sorting and control Tube drawing machine Preliminary cutting device Selecting
unit Crushing machine Final cutting and glazing machine Synchronization and
control system
The electronic system provides also the automatic control of the temperature of
each mould, by means of a sophisticated software routine which adjusts the flow
rate of all (4) cooling fluids.
Line speed: up to 70 cycles/min Maximum items sizes: 400 mm diameter, 150
mm height Feeding system: direct drop from gob feeder Number of moulds: 9 or
18 (other sizes available upon request) Automatic temperature control of each
mould One brushless servo-motor for each mould, providing individual control of
the speed profile - Lincoln automatic lubrication system Complete with unloader
glasstec.01.06.11
Options
mandrel pre-heating muffle Optical device to detect tubes physical defects
(stones, cord,...) Diameters and wall thickness gauging device for sorting Active
data aquisition system Off-line gauging system for statistical check of diameter,
wall thickness, ovality, bow and siding
Ampoule and laboratory glass machines
Danner Tubing Lines
Starting from the early 80’s, Olivotto Glass Technologies has developed and produced Glass Tubing Lines,
using the Danner technology, gaining a leading position
in this field with a great number of lines installed all over
the world.
glasstec.01.06.14
Flash welding and fire polishing machines
Fire polisher machines
Its reliability and its high quality performances make the
Danner-type tubing line a successful primary tool for the production of glass
tubes in sodalime, borosilicate, lead, neutral glass and quartz.
The following families of Fire-Polisher machines are
presently available to glaze a very wide range of articles and glass types.
MODEL RO
Production
Glass tubes for lightingwares (FTL and CFL) Glass tubes for pharmaceutical
packaging ( ampoules, vials, cartridges production) Glass tubes for laboratory
wares (chemical industry) Glass rods
Main Features
© 2010 Messe Düsseldorf GmbH
405
The family of horizontal fire polisher machines model RO can be divided in three
groups:
RO-C for traditional tableware (tumblers, bowls, dishes, cups): this type of machine is operated with continuous chain rotation as well as adjustable spindle
rotation. It is normally used for high speed production (up to 220 pcs/min). It
can work with single, double or triple step according to the article size.
© 2010 Messe Düsseldorf GmbH
406
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
MODEL RRC
RO-I for traditional tableware as well as not-round articles and large ovaldishes/trays : this type of machine could be operated with both continuous chain
rotation or slow / total indexed motion. By means of the control system it is possible to program a constant, indexed or modulated speed. In case of production
of large items, by means of the electronic control it is possible to run the machine
with double or triple step and index mode in order to slow-down or completely
stop the article under the dedicated burners. The rotation speed of the wareholders in the glazing area is electronically controlled and programmable from
the control cabinet. Whenever necessary it is possible to stop the rotation of the
items in a specific area of the fire polishing.
RO-S for stemware or articles with handle : this type of machine is normally
operated with continuous chain rotation but with two glazing zones one where
the spindles are rotating and one where the spindles are fixed and oriented.
With this machine is then possible to glaze the article edge with normal spindle
rotation and then to orient the article in order to glaze the moulds seams (on the
stems or on the handle) It is also possible to equip the fire-polisher with movable
burner holders that follow the article during its movement.
The RRC machine is a specific rotary fire-polisher machine (Geneva wheel
driven) to specifically glaze stems before they will be sealed (with different process) to the bowl. 18 or 24 stations machines are available with gas/oxygen
burners and continuous spindle rotation. Loading is performed directly from the
press and unloading with overturning device is provided to a conveyor.
MODEL RS
The RS machine is a static fire-polisher machine to glaze stems or large shaped
articles at slow speed. The article is loaded on a supporting plate that could be
rotated or kept fixed, as needed, and it is glazed by means of fixed burners located in the most critical area. After glazing the article is automatically unloaded
with a pusher system to an unloading conveyor. Two or more sections machines
are available with different sizes according to the article dimension.
WS welding & stretching machine
Technical features and Options for RO type fire-polishers
All the fire-polishing machines model RO can be completed by rotary or linear
type loading and/or unloading transfers. Such transfers can be either pneumatically or electrically operated and can be equipped with overturning devices.
Different machines lengths (from 4000 to 8000 mm), chain link pitch (from 110 to
200 mm) and burner holder sizes (from 200 to 1000 mm) are available, Combustion systems and relevant burners for both gas/air and gas/oxygen are available.
MODEL RLP
The vertical chain rotation fire polisher model RLP is a specific machine for glazing large articles with not round-shape at medium-slow speed. It work on index
mode, typically without spindle rotation (spindle rotation is available as option)
and allow the use of dedicated burners to glaze external and internal parts of the
articles (i.e. ovenware and large trays), a special device to rotate the article of 90
degrees is available as option. Gas/oxygen burners are normally recommended
for this application. Different machine length are available, upon request.
© 2010 Messe Düsseldorf GmbH
407
This is one of the last machines developed by Olivotto Glass
Technologies, and it is dedicated to the production of high
quality stemwares in Lead Crystal, Barium and even Sodalime glass.
The Olivotto Glass Technologies Welding and Stretching machine can be supplied in two different versions, mechanical
(traditional) or fully electronic (innovative version), and in two main configurations, with 60 or 48 working sections (WS60 or WS48), according the type of
bowl forming machine installed upstream.
The stemwares produced by this process are typically in Barium or in Lead Crystal glass and, because of the wares high final quality and their special shapes,
are intended for high-end markets.
Other important feature of this machine is the high productivity (without influencing the final quality): infact its typical production speed is of 40 finished
stemwares per minute (gross production rate) with the WS48 and of 60 finished
© 2010 Messe Düsseldorf GmbH
408
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
stemwares per minute with the WS60.
Accuracy of detections :
defect size: down to 0.025 mm defect length: down to 0.5 mm
Article Dimensions
No. 1 off-line measuring device
Off-line measuring equipment for sample tubes produced by the olivotto danner
line, including operator interface with manual introduction of tube production data
(lot, type, data, etc..) and visualization (with the possibility of connecting to a
printing device) of tube:
Min – Max disk diameter: 40 -100 mm
Max bowl diameter: 130 mm
Min – Max Bowl Moil diameter:
minimum outer diameter average outer diameter maximum outer diameter minimum wall thickness average wall thickness maximum wall thickness siding ovality and bow
for press & blow process: 40 – 100 mm
for blow & blow process: 50 – 120 mm
Min – Max bowl height (with moil): 100– 277 mm
Min – Max stem height (stretched): 15 – 160 mm
Omco International N.V.
Min – Max complete stemware height (including moil): 100 – 377 mm
glasstec.01.07
Address
Industriepark ’Lakeland’, Venecolaan 10
9880 Aalter
Belgium
Phone
+32 9 3742005
Fax
+32 9 3743469
Internet address
www.omcomould.com
E-Mail
sales@omcomould.com
Stand
Hall 13, A16 (Page 540)
Equipment for glass tube production
Diameter and tickness gauging device
It is designed for continouos monitoring and gauging the tube diameter and wall
thickness, through a dedicated detecting instrument. This instrument, developed in cooperation with Fraunhofer Insistute, is a telecentric laser scanner measuring tube external diameter through the evaluation of the object’s sahdow and
tube wall thickness by detecting and evaluating special beam paths through the
object. The signal is sent to the sorting unit for the selection of the good/bad
tubes. The diameter and Thickness gauging device is placed on a steel framework that can be moved down and out of the tubing line by a pneumatic cylinder.
Accuracy of the measurements :
external diamenter: better than ± 0.010 mm wall thickness: better than ± 0.005
mm
Optical device for physical defects detection
Product Overview
It is designed for continuous and monitoring the glass tube, through a dedicated
digital camera, to detect physical defects on the glass surface (i.e. stones, cords,
air lines). The signal is sent to the sorting unit for the selection of the good/bad
tubes. The dual axis optical inspection instrument is capable of monitoring moving material such as wire, tubes, fibers, or any object where flaw detection is of
importance.
glasstec.01.06.13
Omco International N.V.
Moulds for glass production
It consists of a sensitive electronics unit and a fiber optic detector head available
in a dual axis configuration.
© 2010 Messe Düsseldorf GmbH
409
© 2010 Messe Düsseldorf GmbH
410
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Omco International N.V.
Product Overview
glasstec.01.06.13
Optima S.r.l.
Moulds for glass production
glasstec.01.10.01
Optimization of glass cutting and glass production yield
glasstec.02.13.02
Software
glasstec.05.03.01
MRP/CAD/CIM systems
glasstec.05.03.03
Optimization systems for cutting and yield
glasstec.05.03.04
Process control systems
glasstec.05.03.05
Other control systems
We mould it for glass
OMCO offers a wide range of products and services
to the hollow glassindustry: 1) Foundry Especially developed casting materials for glass moulds in grey
and nodular iron and aluminium bronze 2) Moulds
and mould accessoires for the production of packaging
glass, in particular for : a) Food b) Beverage c) Cosmetics d) Spirits e) Pharmaceuticals 3) Moulds and mould
accessoires for table ware and pressed glass articles 4) Hot glass handling products
Product Details
Optima S.r.l.
glasstec.01.10.01
Address
Via Amerigo Vespucci, 4
40017 San Giovanni in Persiceto / BO
Italy
Phone
+39 051 826336
Fax
+39 051 825182
Internet address
www.optima.it
E-Mail
info@optima.it
Stand
Hall 16, C39 (Page 556)
© 2010 Messe Düsseldorf GmbH
Optima S.r.l.
Optimization of glass cutting and glass production yield
OPTY-WAY
The OPTY-WAY® program is a useful reference for entering, optimizing and
managing work orders for materials to be cut. This package is the end result
of years of specific design research, co-operation and in-the-field experience by
skilled engineers who are experts on solving company problems. Because all
procedures are fully automated and self-guided, even the most inexperienced
users will quickly and easily learn the program’s various functions. OPTY-WAY®
has been fully developed with a 32-bit platform on the Windows XP operating
system. It has therefore all technical features of this operating system, thus being totally compatible with it. Any peripheral or pointing system, such as printers
and mice, supported by Windows 98/ME/XP and 2000/2003 are automatically
compatible with Opty-Way®.
411
© 2010 Messe Düsseldorf GmbH
412
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Ori-Mould Technology Co., Ltd., Su Zhou
Address
Phone
Fax
Internet address
E-Mail
Stand
P-D Refractories GmbH
No. 9 Yinhe Road, High-Tech Industrial
215533 Changshu, Jiangsu
China (Rep.)
Address
Wetro-Siedlung 13-22
02699 Puschwitz
Germany
Phone
+49 35933-70
Fax
+49 35933-7476
Internet address
www.pd-group.com
E-Mail
info.wetro@pd-group.com
Stand
Hall 13, C66 (Page 540)
+86 512 52300099
+86 512 52302555
www.ori-mould.com
wmb@ori-mould.com
Hall 13, B19A (Page 540)
Product Overview
Ori-Mould Technology Co., Ltd., Su Zhou
Product Overview
glasstec.01.06.13
Product Details
glasstec.01.06.13
P-D Refractories GmbH
Moulds for glass production
Ori-Mould Technology Co., Ltd., Su Zhou
glasstec.01.02.01
Refractory materials
glasstec.01.04.02
Forehearth technology
glasstec.01.04.06
Regenerative systems
glasstec.01.04.07
Recuperative systems
glasstec.01.06.01
Gob feeder
glasstec.01.06.02
Ball feeder
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.04.04
Replacement part, wearing parts
Moulds for glass production
Bottle Mould
© 2010 Messe Düsseldorf GmbH
413
© 2010 Messe Düsseldorf GmbH
414
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
P-D Refractories GmbH
of suction cups. The EU safety standard EN13155 requires that in the event of
failure of a vacuum circuit, the remaining vacuum circuits must hold the nominal load with 2-fold safety. The number of failing suction cups can be reduced
through division into four vacuum circuits, so that less suction cups are required
than in traditional 2-circuit vacuum lifting devices.
Tonerdereiche Steine (50-99% Al 2 O 3 ) Bauxitsteine,
keramisch und chemisch gebunden (60-85% Al 2 O
3 ) Sillimanitsteine, keramisch und chemisch gebunden (55-80% Al 2 O 3 ) Korundsteine (60-99% Al
2 O 3 ) Spezialsteine (chromhaltig, zirkonhaltig) Schamottsteine
(25-50% Al 2 O 3 ) Spezialschamottsteine eisenarm CO-Beständigkeit A hohe
Abriebfestigkeit Siliciumkarbidsteine (40-85% SiC) Zirkonsteine (60-65% ZrO 2
Feuerleicht- und Isoliersteine
Furthermore, we will present the KOMBI 7441-DS from our wide range of equipment, with which is possible to turn up to 1800 kg heavy panes by motor and
swivel hydraulically. The large number of possible suction cup configurations
makes this unit extremely versatile.
Product Details
glasstec.01.02.01
Refractory materials
Geformte Erzeugnisse
And we will also display a four-circuit vacuum lifting device, the KOMBI 7411DSG5. This new technology can make a difference, especially with curved glass
panes.
Pannkoke Flachglastechnik GmbH
Address
Händelweg 5
23556 Lübeck
Germany
Phone
+49 451 47008-0
Fax
+49 451 47008-37
Internet address
www.pannkoke.de
E-Mail
info@pannkoke.de
Stand
Hall 15, B21 (Page 552)
Company News
09/08/2010
We will present the proven 2-circuit vacuum lifting device KOMBI 7211-DS3, with
its unique latching mechanism for easy tilting of heavy loads, as a modern fourcycle vacuum lifting device, with which you can now move up to 1200 kg with a
reduced number of suction cups.
New items in the Pannkoke program are our lifting trolleys, that can lift your loads
to heights of more than 4 m, yet are easy to hold and can even be transported
in a van. Additionally to the lifting trolleys we can offer the suitable Pannkoke-2circuit vacuum lifting devices for your work, with all their benefits.
The two-circuit technology is now also available for in-house vacuum lifting devices for insulated glass and window production, providing many new features.
Together with light cranes or swivelling cranes, these vacuum lifting devices
boost your production and improve safety.
Our 7225-MDS4/E is of particular interest, since safety in production should also
be a key topic in your establishment. Many safety features have been integrated
into this device to avoid accidents at work. The device design is based on accident evaluations of a large glass processor, with which an answer was found
for nearly every accident risk. The special features when moving three-fold insulation glass were also taken into account.
Pannkoke Flachglastechnik GmbH
What you can see at the glasstec 2010
At this year’s glasstec we will present our new generation of devices, the 4circuit vacuum systems for glazing work on construction sites within the EU.
These new vacuum lifters achieve higher device security with a lower number
© 2010 Messe Düsseldorf GmbH
415
© 2010 Messe Düsseldorf GmbH
416
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Manipulation unit 7025-MDmS4-2/E
Product Overview
Pannkoke Flachglastechnik GmbH
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.08
Construction and glazing equipment
glasstec.02.01.01.01
Cutting technology for float glass
glasstec.02.01.01.02
Cutting technology for laminated safety glass
glasstec.02.01.01.03
Cutting technology for technical glass
glasstec.02.11.01
Tools
Lift, support and move using the Manipulation unit 7025MDmS4-2/E, e.g. for glass, insulating glass panes,
metal plates, plastic plates, etc.
Manipulation unit 7025-MDS4/E
Product Details
glasstec.01.13.02
Lift, support and move using the Manipulation unit 7025MDS4/E, e.g. for glass, insulating glass panes, metal
plates, plastic plates, etc.
Manipulation unit 7025-MS4/E
Lift, support and move using the Manipulation unit 7025MS4/E, e.g. for glass, insulating glass panes, metal plates,
plastic plates, etc.
Pannkoke Flachglastechnik GmbH
Transport and handling systems
496 Plate Glass Carriage
The Plate Glass Carriage 496 was constructed for the
transport of large insulating glass panes or shop windows up to a weight of 700 kg and a glass length of
2500 to 6000 mm.
Vacuum lifting device Kombi 7001-AB
The Kombi 7001-AB can be used to transport plate material with a weight of up to 1500 kg and dimensions up
to 6000 x 3000 mm.
Manipulation unit 7025-MD2/E
Vacuum lifting device Kombi 7031-CS
Lift, support and move using the Manipulation unit 7025MD2/E, e.g. for glass, insulating glass panes, metal plates,
plastic plates, etc.
Lift, support and move using the Manipulation unit 7031-CS,
e.g. for glass, metal plates, plastic plates, etc.
Manipulation unit 7025-MD4/E
Lift, support and move using the Manipulation unit 7025MD4/E, e.g. for glass, insulating glass panes, metal
plates, plastic plates, etc.
© 2010 Messe Düsseldorf GmbH
417
© 2010 Messe Düsseldorf GmbH
418
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Vakuum lifting device Kombi 7231-CS
mechanical holding device in accordance with the safety standard EN 13155.
Lift, support and move using the Manipulation unit
7231-CS, e.g. for glass, metal plates, plastic plates,
etc.
If required, the battery-powered Kombi 7011-DS5 is also available with 2-circuit
technology as the 7211-DS5. The battery-powered Kombi 7211-DS5 has two
independent vacuum circuits. Each vacuum circuit is designed so that it can
support twice the nominal load on its own, if one of the systems fails, or if there
is a loss of power, you receive a warning.
Particularly geared to your requirements, this series can vertically and horizontally transport loads with a weight of up to 2000 kg and a size of up to 12000 x
3000 mm.
The outer suction cups are slidably mounted. To transport large surface area
objects in a vertical direction, extensions can be fitted.
Venturi-Device 7005-AB/E
Simple swapping of the lower part means that the battery-powered Kombi 7011DS5 can be converted at any time to a battery-powered Kombi 7011-ADS or
battery-powered Kombi 7011-DSG5.
The Venturi Device 7005-AB/E can be used to transport
plate material with a weight of up to 1500 kg and dimensions up to 6000 x 3000 mm. The outer suction cups are
extendable. All you need otherwise is a crane and a 6
bar compressed air supply.
glasstec.01.13.08
The battery-powered vacuum pump does not require a power supply, so that the
battery-powered Kombi 7011-DS5 can be used anywhere.
Construction and glazing equipment
Battery-powered vacuum lifting device Kombi 7011DS3
The vacuum/release function can also be initiated by a wireless remote control, which is particularly recommendable when transporting larger dimensions
or using a forklift.
The battery-powered Kombi 7011-DS3 allows you to
move loads of up to 1000 kg. The load can be turned
through +/- 360 and or pivoted through 90 degrees.
Turning and tilting are carried out manually. There are
locking points every 5 degrees throughout the tilting
range.
Simple swapping of the suspension frame means that the battery-powered
Kombi 7011-DS5 can be converted at any time to a compressed air-driven Venturi Device 7005-DS5 or a mains - operated Kombi 7001-DS5.
Battery-powered vacuum lifting device Kombi 7011-DSG
Battery-powered vacuum lifting device Kombi 7011-DS5
Lift, support and move convex or concave curved material using the battery-powered Kombi 7011-DSG5, e.g. for glass,
metal plates, plastic plates, etc.
The battery-powered Kombi 7011-DS5 allows you to move
loads of up to 600 kg. The load can be turned through +/- 90
and or pivoted through 90 degrees. Turning and tilting are carried out manually. There are locking points every 15 degrees
throughout the tilting range.
Particularly geared to your requirements, this series can transport loads with a weight of up to 400 kg vertically.
The battery-powered Kombi 7011-DS5 has a 1-circuit vacuum
system. For construction site operation within the EU, you require an additional
© 2010 Messe Düsseldorf GmbH
419
The load can be turned through +/- 90 and or pivoted through 90 degrees. Turning and tilting are carried out manually. There are locking points every 15 de-
© 2010 Messe Düsseldorf GmbH
420
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
grees throughout the tilting range.
Turning and tilting are carried out manually. There are
locking points every 3 degrees throughout the tilting range.
The battery-powered Kombi 7011-DSG5 has a 1-circuit vacuum system. For
construction site operation within the EU, you require an additional mechanical
holding device in accordance with the safety standard EN 13155.
If required, the battery-powered Kombi 7011-DSG5 is also available with 2-circuit
technology as the 7211-DSG5. The battery-powered Kombi 7211-DSG5 has two
independent vacuum circuits. Each vacuum circuit is designed so that it can
support twice the nominal load on its own,if one of the systems fails, or if there
is a loss of power, you receive a warning.
The suction cup rows are mounted in a translational and rotatable manner, so
that simple matching to the radius is possible. The minimum radius of the transported load is 800 mm for this device.
Simple swapping of the lower part means that the battery-powered Kombi 7011DSG5 can be converted at any time to a battery-powered Kombi 7011-ADS5 or
battery-powered Kombi 7011-DS5.
The battery-powered vacuum pump does not require a power supply, so that the
battery-powered Kombi 7011-DSG5 can be used anywhere.
The vacuum/release function can also be initiated by a wireless remote control, which is particularly recommendable when transporting larger dimensions
or using a forklift.
Simple swapping of the suspension frame means that the battery-powered
Kombi 7011-DSG5 can be converted at any time to a compressed air-driven
Venturi Device 7005-DSG5 or a mains - operated Kombi 7001-DSG5.
Battery-powered vacuum lifting device Kombi 7211DS4
The battery-powered vacuum lifting device (vacumm
lifter) Kombi 7211-DS4 allows you to move loads of up
to 600 kg. The load can be turned through +/- 360 and
or pivoted through 90 degrees. Turning and tilting are
carried out manually. Two engaging positions (vertical and horizontal)are available for the swivel range.
Battery-powered vacuum lifting device Kombi 7211-DS5
The battery-powered Kombi 7211-DS5 allows you to move
loads of up to 600 kg. The load can be turned through +/- 90
and or pivoted through 90 degrees. Turning and tilting are carried out manually. There are locking points every 15 degrees
throughout the tilting range.
The battery-powered Kombi 7211-DS5 has a 2-circuit vacuum
system and was developed for construction site use in accordance with the
safety standard EN 13155. Use of 2-circuit technology means that the batterypowered Kombi 7211-DS5 has two independent vacuum circuits. Each vacuum
circuit is designed so that it can support twice the nominal load on its own, if one
of the systems fails, or if there is a loss of power, you receive a warning.
The suction cup separation cannot be changed for 500 kg units (2 x 5 suction
cup 388) or 600 kg units (2 x 6 suction cup 388). However, each suction cup
can be individually locked.
Battery-powered vacuum lifting device Kombi 7211DS3
Simple swapping of the lower part means that the battery-powered Kombi 7211DS5 can be converted at any time to a battery-powered Kombi 7211-DSG5.
The battery-powered Kombi 7211-DS3 allows you to
move loads of up to 1000 kg. The load can be turned
through +/- 360 and or pivoted through 90 degrees.
The battery-powered vacuum pump does not require a power supply, so that the
battery-powered Kombi 7211-DS5 can be used anywhere.
© 2010 Messe Düsseldorf GmbH
421
© 2010 Messe Düsseldorf GmbH
422
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
The vacuum/release function can also be initiated by a wireless remote control, which is particularly recommendable when transporting larger dimensions
or using a forklift.
The vacuum/release function can also be initiated by a wireless remote control, which is particularly recommendable when transporting larger dimensions
or using a forklift.
Battery-powered vacuum lifting device Kombi 7211-DSG5
Battery-powered vacuum lifting device Kombi 7411DS SO01
Lift, support and move convex or concave curved material using the battery-powered vacuum lifting device (vacuum lifter)
Kombi 7211-DSG5, e.g. for glass, metal plates, plastic plates,
etc.
You have a problem transporting small heavy glass
panes/panels to the EU construction site?
You must be able to rotate and swivel the pane?
Particularly geared to your requirements, this series can transport loads with a weight of up to 400 kg vertically.
The vacuum lifting device (vacuum lifter) should be independent of the mains
supply and extremely adaptable to the glass panes?
The load can be turned through +/- 90 and or pivoted through 90 degrees. Turning and tilting are carried out manually. There are locking points every 15 degrees throughout the tilting range.
The battery-powered vacuum lifting device (vacuum lifter) Kombi 7211-DSG5
has a 2-circuit vacuum system and was developed for construction site use in accordance with the safety standard EN 13155. Use of 2-circuit technology means
that the battery-powered vacuum lifting device (vacuum lifter) Kombi 7211-DSG5
has two independent vacuum circuits. Each vacuum circuit is designed so that
it can support twice the nominal load on its own, if one of the systems fails, or if
there is a loss of power, you receive a warning.
The suction cup rows are mounted in a translational and rotatable manner, so
that simple matching to the radius is possible. The minimum radius of the transported load is 750 mm for this device.
Also suitable for curved glass panes/panels, if it should be necessary?
If necessary, the vacuum lifting device (vacuum lifter) should also be extendable
with a counterweight unit, allowing you to carry out glazing under eaves up to a
depth of 1.5 m or under projecting roofs but also outwards inclined glazing up to
an angle of 10°?
Battery-powered vacuum lifting device Kombi 7441-DSG
With the battery-powered vacuum lifting device (vacuum lifter)
Kombi 7441-DSG you can move convex and concave shaped
materials up to 800 kg, such as e.g. glass, sheet metals, plastic
boards. The load can be turned through +/- 360 and or pivoted
through 90 degrees.
Simple exchange of the lower part allows the battery-powered vacuum lifting
device (vacuum lifter) Kombi 7211-DSG5 to be retrofitted to a battery-powered
vacuum lifting device (vacuum lifter) Kombi 7211-DS5 at any time.
The battery-powered vacuum pump does not require a power supply, so that the
battery-powered vacuum lifting device (vacuum lifter) Kombi 7211-DSG5 can be
used anywhere.
© 2010 Messe Düsseldorf GmbH
423
© 2010 Messe Düsseldorf GmbH
424
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
combustion gases to exhaust from the forehearth without
Parkinson-Spencer Refractories Ltd.
Address
entering the central cooling section. These exhausts are also
Holmfield
HX3 6SX Halifax
United Kingdom
fitted with automatically controlled damper blocks. When
the system is operating in heating mode, the cooling air
control valve and side dampers are closed
Phone
+44 1422 254472
Fax
+44 1422 254473
automatically. This forces the combustion gases
into the centre of the forehearth resulting in a
rapid increase in glass temperature. In this mode
Internet address
www.parkinson-spencer.co.uk
E-Mail
admin@parkinson-spencer.co.uk
Stand
Hall 13, F15 (Page 540)
the central flue is used to exhaust the combustion
gases. By automatically controlling the rate of
cooling air, combustion gas and the position of the
side and central dampers the influence of the cooling
and combustion within the forehearth can be varied and the
degree of thermal conditioning controlled.
Product Overview
Parkinson-Spencer Refractories Ltd.
glasstec.01.04.02
glasstec.01.02.01
Refractory materials
glasstec.01.04.02
Forehearth technology
Forehearth technology
The MF-16-MC Forehearth
The design limitations associated with a forehearth width of 16” and
the trend towards larger scale production has seen advances in
Product Details
Parkinson-Spencer Refractories Ltd.
forehearth design and innovation concentrated on large tonnage
forehearths. Consequently the needs of the small-scale producer have
glasstec.01.02.01
Refractory materials
largely been ignored. To address this problem PSR has developed a
System 500 Forehearth - Heating and Cooling
unique conditioning system for 16” wide forehearths. This system,
The roof block geometry used in the System 500 technology
called the MF-16-MC Forehearth, utilises an automatically controlled
effectively divides the forehearth into three lateral chambers. The
central cooling system and has been successfully applied to
central chamber is used as a conduit for a longitudinal, forced
forehearths with pullrates below 20 tonnes per day.
convection cooling system in which cooling air is injected into the
The System 500 Forehearth
forehearth chamber at the start of each cooling zone and
The result of an intensive research and development
exhausted through a central flue at the end of the zone. The
program utilising both physical and mathematical
cooling air flow rate and the position of the exhaust damper are
modelling techniques, the System 500 technology has
automatically controlled. In addition the forehearth is configured
been specifically designed to optimise the thermal
with side flues which, when operating in cooling mode, allow the
© 2010 Messe Düsseldorf GmbH
425
© 2010 Messe Düsseldorf GmbH
426
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
conditioning process in the forehearth. Launched in the
Mischtechnologie, für Homogenisierungsgrade und
early 1990’s the System 500 forehearth is currently
Mischungen mit hoher Wiederholgenauigkeit. Er ist
operated by glass producers in almost 40 countries world
einfacher und damit problemloser, gründlicher und
wide. These installations range from large 150 tonnes per
damit besser, robuster und damit langlebiger.
day production lines to smaller 20 tonnes per day producers.
Der Pemat PMPR Planetenmischer mit Wirbler
Irrespective of the scale of production the System 500 provides the
(patentrechtlich geschützt) erreicht unvergleichbare
degree of thermal conditioning demanded by glass producers in the 21st century.
Mischergebnisse.
Der Wirbler macht den Unterschied
Einsatzgebiete PMP, PMPR
Pemat Mischtechnik GmbH
Address
Transportbeton
Hauptstr. 29
67361 Freisbach
Germany
Werksbeton
Mörtelproduktion
Dachziegelindustrie
Phone
+49 6344 9449-0
Fax
+49 6344 9449-500
Internet address
www.pemat.de
Kalksandsteinindustrie
Glasgemenge
Kraftwerke
Chemie
Umwelttechnik
E-Mail
info@pemat.de
Stand
Hall 13, E23 (Page 540)
Feuerfeste Massen
Und beim Einsatz in vielen anderen Bereichen
Product Overview
glasstec.01.03.04
Pemat Mischtechnik GmbH
Seine kompakte Bauweise, die wartungsfreundliche Anordnung aller Komponenten und die qualitativ
hochwertige Ausstattung machen ihn zum zuverlässigen Mischer für den rauen
Alltagsbetrieb. Der Antrieb
Mixing technology
Product Details
glasstec.01.03.04
Technische Beschreibung
Pemat Mischtechnik GmbH
des Planetenmischers erfolgt über ein robustes Präzisionsgetriebe. Ein elektronischer Sanftanlauf
erleichtert das Anlaufen bei vollem Mischtrog und schont die Antriebselemente.
Der Antriebsmotor ist mit 3
Mixing technology
Planetenmischer PMP Planetenmischer PMPR mit Wirbler
Der Pemat PMP Planetenmischer
Thermofühlern versehen, die in Verbindung mit einem dementsprechenden Auslösegerät eine Überlastung
wurde konzipiert für höchste Ansprüche an die
verhindern.
© 2010 Messe Düsseldorf GmbH
427
© 2010 Messe Düsseldorf GmbH
428
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Unsere Antriebseinheit bietet
Schneller und sauberer Entleervorgang
Lange Lebensdauer
Links/Rechts Öffnung möglich
Hohe Betriebssicherheit
Betriebssichere und kompakte Bauweise
Kurze Mischzeiten
Bis zu 4 Auslauföffnungen pro Mischer
Optimalen Mischeffekt
Teilöffnungen möglich
Besondere Laufruhe
Im Notfall auch manuelles Öffnen
Drehzahlregelung
Berührungslose Endschalter regeln die Öffnung
Geringen Verschmutzungsgrad
Entleerschutz nach UVV
Niedrigen Wartungsaufwand
Zur Betätigung der Entleerung des Mischers ist ein Hydraulikaggregat angebaut, das den erforderlichen Betriebsdruck liefert. Auch bei dieser Kompakteinheit konnten wir unseren hohen Qualitätsanspruch verwirklichen. Das auf
Führungsschienen gelagerte Hydraulikaggregat kann zur Wartung unter dem
Mischer hervorgezogen werden.
Der Boden und die Außenwand des Mischers können sowohl mit Stahlblech verschiedener Qualitäten als auch mit Verbundmaterial, Spezial-Hartgusskacheln
oder Keramik ausgekleidet werden.
Seitliche Türen am Mischtrog erleichtern die Reinigung und Wartung im Innenraum.
Die gesamten Mischarmaufhängungen und Verstellelemente sind im Inneren
des Getriebegehäuses und
somit schmutzgeschützt untergebracht.
In der Hydraulikanlage ist serienmäßig eine zusätzliche Handpumpe eingebaut,
mit der bei Stromausfall die Entleerung des Mischers geöffnet werden kann. Bei
den kleineren Mischertypen ist dies manuell möglich.
Der Auslauftrichter kann individuell an den Anlagentyp angepasst werden.
Blechkonstruktion mit auswechselbarem Schleißblech
Die Misch-und Abstreifarme sind elastisch gelagert und können horizontal und
vertikal verstellt werden.
Die Mischarme an den Rührsternen sind aus Federstahl hergestellt; alle Arme
sind mit Schleiß- Manschetten versehen. Die Misch-, Entleer-, Abstreif- und
Wirblerwerkzeuge in unterschiedlichen Ausführungen und Qualitäten verfügen
über hohe Standzeiten und sorgen für das ideale Mischergebnis.
Der Wirbler macht den Unterschied, auch das Nachrüsten des Wirblers ist möglich.
Mischwerkzeuge:
Blechkonstruktion mit Gummi- oder Kunststoffbelag
Rohrgerüst-Konstruktion mit Gummi-Einhang
Schwenktrichter oder Teleskoptrichter
Die Schutzhaube ist mit 4 großflächigen Segmenten ausgeführt. Sie kann den
Erfordernissen der einzelnen Komponenten (Bindemittel, Zuschlagstoffe) angepasst
werden. Eine Gummi-Spezialabdichtung verhindert das Austreten von Staub.
Durch eine Schauklappe lässt sich der Mischvorgang beobachten. SicherheitsEndschalter verhindern zuverlässig ein versehentliches Einschalten des Mischers bei geöffnetem Klappsegment.
Hartguss
Gummi
Kunststoff PU
Die einzelnen Klappsegmente können manuell oder durch verschiedene Hebezeuge
leicht geöffnet werden.Handwinde
Widia-Kanten und Spitzen
Elektro-Kettenzug
hartgelötete Widia-Panzerung
Elektrowinde
Eine technisch ausgereifte, hydraulische
Gasdruckfeder
Entleerung gewährleistet einen reibungslosen
Verschiedene, auf die jeweiligen Anforderungen zugeschnittene Entlüftungskonzepte
lösen das Problem der Verdrängungsluft zuverlässig und sicher.
Ablauf im Mischprozess.
© 2010 Messe Düsseldorf GmbH
429
© 2010 Messe Düsseldorf GmbH
430
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Filtersack
Luftausgleichssack (Airbag)
Product Overview
Filter-Vollautomat mit Überströmrohr (Unterdruckprinzip)
glasstec.01.04.13
Feeder colouring
Eine Wasserwaage, eine Wasseruhr, ein Impulszähler oder ein elektronisches
Wasserdosiergerät regeln die Zugabe des Mischwassers je nach Anforderung
über Fallwasser mit Prallteller oder über Spritzdüsen.
glasstec.02.11.09
Highly opaque special colours and conductive silver
pastes for automotive glass
Sämtliche elektrische Leitungen sind auf einen Klemmenkasten zusammengeführt und entsprechen den Vorschriften und Bestimmungen der VDE/CE.
glasstec.03.04.01.02
PV system components
PEMCO International, c/o PEMCO Emails S.r.l.
PMP, PMPR Zusatzausstattung:
glasstec.03.10.03.02.06Glass paints
Beschickungsaufzüge
Dampfzuführung
glasstec.03.10.03.02.09Screenprinting, framing, painting and texturing tools
Reinigungsanlage
Hygrometer
Product Details
Kamera-Aufbau
glasstec.01.04.13
Kühlung/Trocknung
PEMCO International, c/o PEMCO Emails S.r.l.
Feeder colouring
Glass Frits for Feeder Colouration
Based on its almost 90 years of experience in enamel and ceramic frit smelting,
PEMCO now also offers a special line of glass frits for forehearth colouring.
PEMCO International, c/o PEMCO Emails S.r.l.
Address
These high performance frits are used by the glass industry for the production of
coloured bottles, flaconnages, tableware, glass building blocks and other products.
Via delle Industrie, 9
24040 Filago / BG
Italy
Phone
+39 035 9002011
Fax
+39 035 9002693
Internet address
www.pemco-intl.com
E-Mail
info.fil@pemco-intl.com
Stand
Hall 12, F60 (Page 538)
© 2010 Messe Düsseldorf GmbH
PEMCO International is providing glassmakers with a wide range of standard
colours like blue, green, black and brown as well as special colours such as
pink, purple and violet.
These colourants have found quick acceptance throughout the glass industry
due to their outstanding processing properties and excellent colour consistency.
Through a continued focus on research and a close co-operation with the glass
producers, PEMCO can quickly develop and supply special colouring frits which
are adapted to the glass composition and the forehearth processing parameters
of the customers.
431
© 2010 Messe Düsseldorf GmbH
432
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Plansee Metall GmbH
glasstec.01.08.01
Address
6600 Reutte
Austria
Phone
+43 5672 600-0
Fax
+43 5672 600-500
Internet address
www.plansee.com
E-Mail
info@plansee.com
Stand
Hall 13, C69 (Page 540)
Product Overview
Plansee Metall GmbH
Glass wool technology
Tungsten and its alloys
Tungsten has the highest melting point (3420 °C) and
the lowest vapour pressure of all metals . Tungsten is
an excellent material for high-vacuum technology up to
the highest temperatures. Low thermal expansion combined with its high melting point and its perfect form stability make tungsten an excellent material for glass seals. The electric resistance
of tungsten is important for its use as heater material for high-temperature furnaces. Thanks to its high density tungsten has a good absorption ability for
ionising radiation. At ambient temperature, ordinary tungsten is rather brittle
and therefore difficult to process. At higher temperatures (between 200 and 500
°C), however, it changes to a ductile condition. Tungsten’s high temperature
strength and strain depends on deformation and annealing pre-treatment may
vary significantly at certain temperatures.
Plansee Metall GmbH
glasstec.01.02.01
Refractory materials
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.04
Smelting technology for pot furnaces
glasstec.01.04.08
Electrically heated systems
glasstec.01.05.01
Float glass technique
glasstec.01.07
Equipment for glass tube production
glasstec.01.08.01
Glass wool technology
glasstec.01.08.02
Rock wool technology
glasstec.01.08.03
Textile glass fibre technology
Since the beginning of the 20th century, PLANSEE is one of the most important
producers of tungsten. Thanks to many years of experience in the production
and processing PLANSEE today offers a wide range of mill and final products
made of tungsten and tungsten-alloys.
Tungsten: The advantages at a glance
© 2010 Messe Düsseldorf GmbH
* high melting temperature * low vapour pressure * sufficiently high electrical
resistance * low thermal expansion combined with good thermal conductivity *
high E-modulus
Mechanical properties of tungsten The mechanical properties of tungsten can be
influenced by the purity of the material, the type and amount of alloying elements,
heat treatment (annealing condition) and microstructure. Tungsten has a bodycentred cubic lattice structure and exhibits very low ductility at room temperature.
The ductile to-brittle transition temperature can be reduced by mechanical working and alloying. Strength increases with increasing degree of deformation.
Different than most other metals, working also increases the ductility. Roomtemperature ductility can be improved by alloying with rhenium. The mechanical
properties, especially creep strength, can be improved significantly by the addition of small quantities of oxides of cerium or lanthanum. Various tungsten alloys
are used depending on specific customer requirements and areas of application.
433
© 2010 Messe Düsseldorf GmbH
434
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Chemical properties of tungsten Tungsten and its alloys have a similar corrosion
behaviour (with the exception of tungsten-copper and the high-density alloys).
Below 60 % humidity tungsten is resistant to corrosion. In damper air surface
staining occurs (coloured oxides), although to a lesser extent than with molybdenum. Rough surfaces are more susceptible than smoother ones. In certain
water-based media above 100 °C (373K), a lack of resistance to attack from alkaline and oxidizing substances is to be expected. Reactions can occur in the
presence of oxidizing gases and elements in other states of matter at temperatures above 250 °C (523K). Molten glass, nitrogen, inert gases, molten metals
and ceramic oxides attack tungsten only very slightly, even at very high temperatures, provided they do not contain additional oxidizing agents.
Typical fields of application Since the early 20th century PLANSEE has developed various grades of tungsten for different applications
Tungsten and its alloys are used in the lighting industry and electronics, for medical applications and thin-film technology as well as for welding electrodes and in
the construction of high-temperature furnaces. Additionally tungsten is the main
component of tungsten-rhenium alloys, composite materials (tungsten-copper)
and for high-density heavy-metal alloys (Densimet® and Inermet®).
Pure tungsten is used only in a few application fields such as the coating industry
with crucibles and sputter targets and high-temperature furnace construction
with heating elements and heat shields. For special applications, tungsten with
a defined residual porosity of up to 35 volume percent is also produced.
glasstec.01.08.02
Rock wool technology
tion of small quantities of oxides of cerium or lanthanum. Various tungsten alloys
are used depending on specific customer requirements and areas of application.
Chemical properties of tungsten Tungsten and its alloys have a similar corrosion
behaviour (with the exception of tungsten-copper and the high-density alloys).
Below 60 % humidity tungsten is resistant to corrosion. In damper air surface
staining occurs (coloured oxides), although to a lesser extent than with molybdenum. Rough surfaces are more susceptible than smoother ones. In certain
water-based media above 100 °C (373K), a lack of resistance to attack from alkaline and oxidizing substances is to be expected. Reactions can occur in the
presence of oxidizing gases and elements in other states of matter at temperatures above 250 °C (523K). Molten glass, nitrogen, inert gases, molten metals
and ceramic oxides attack tungsten only very slightly, even at very high temperatures, provided they do not contain additional oxidizing agents.
Typical fields of application Since the early 20th century PLANSEE has developed various grades of tungsten for different applications
Tungsten and its alloys are used in the lighting industry and electronics, for medical applications and thin-film technology as well as for welding electrodes and in
the construction of high-temperature furnaces. Additionally tungsten is the main
component of tungsten-rhenium alloys, composite materials (tungsten-copper)
and for high-density heavy-metal alloys (Densimet® and Inermet®).
Pure tungsten is used only in a few application fields such as the coating industry
with crucibles and sputter targets and high-temperature furnace construction
with heating elements and heat shields. For special applications, tungsten with
a defined residual porosity of up to 35 volume percent is also produced.
Rock wool technology
Tungsten: The advantages at a glance
* high melting temperature * low vapour pressure * sufficiently high electrical
resistance * low thermal expansion combined with good thermal conductivity *
high E-modulus
Mechanical properties of tungsten The mechanical properties of tungsten can be
influenced by the purity of the material, the type and amount of alloying elements,
heat treatment (annealing condition) and microstructure. Tungsten has a bodycentred cubic lattice structure and exhibits very low ductility at room temperature.
The ductile to-brittle transition temperature can be reduced by mechanical working and alloying. Strength increases with increasing degree of deformation.
Different than most other metals, working also increases the ductility. Roomtemperature ductility can be improved by alloying with rhenium. The mechanical
properties, especially creep strength, can be improved significantly by the addi-
© 2010 Messe Düsseldorf GmbH
435
© 2010 Messe Düsseldorf GmbH
436
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Gallo, Gerresheimer, HNGI, O-I, Saint Gobain, Sisecam, Wiegand.
Pneumofore S.p.A.
Address
Via N. Bruno, 34
10098 Rivoli / TO
Italy
Phone
+39 011 9504030
Pneumofore presents its technology and tailored vacuum solutions for glassworks at Glasstec 2010, Hall 12 / Booth C35.
Product Overview
Fax
+39 011 9504040
Internet address
www.pneumofore.com
E-Mail
Stand
Pneumofore S.p.A.
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.02.06.01
Vacuum coating equipment
glasstec.02.11.06
Compressor
glasstec.02.11.07
Vacuum pumps
info@pneumofore.com
Hall 12, C35 (Page 538)
Product Details
Company News
08/02/2010
Pneumofore S.p.A.
glasstec.01.06.17
Pneumofore S.p.A.
Aids for the forming of hollow glass
Rotary Vane Vacuum Pumps for IS Machines
MODERN, AIR COOLED VACUUM SYSTEMS AT
GLASSTEC 2010
Models: UV series with Variable Speed Drive Option (VS)
The variable speed (VS) drive option allows a constant vacuum level at the IS machine and reduce maintenance expenses as well as electrical power bills .
Pneumofore confirms its presence at Glasstec, the world no.
1 glass industry tradeshow, as experienced manufacturer of
centralized vacuum systems for IS machines in worldwide
glassworks.
Vacuum improves the forming process and the quality of glass
containers by reducing settle blow marks. It is also used on
blank side to increase the speed of production.
The ready-to-use Pneumofore rotary vane vacuum pumps offer constant performance over 24/7 operation, specially designed for the tough working conditions in glassworks. The unique air cooling
system avoids troubles with cooling water circuits.
Furthermore, Pneumofore solutions reduce maintenance expenses and electrical power bills, thanks to the variable speed (VS) drive option, which allows a
constant vacuum level at the IS machine.
Pneumofore units are the first choice for users seeking the shortest Return of
Investment and the lowest Life Cycle Cost. To mention some: Ardagh, Consol,
© 2010 Messe Düsseldorf GmbH
437
© 2010 Messe Düsseldorf GmbH
438
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
PT. Dyson Zedmark Indonesia
Putsch Meniconi S.p.A.
Address
MM2100 Industrial Town JL Sulawesi,
17520 Cikarang Barat - Bekasi
Indonesia
Address
Via Irlanda, 1 - Loc. Bellavista
53036 Poggibonsi
Italy
Phone
+62 21 8981270
Phone
+39 0577 90311
Fax
+62 21 8981271
Fax
+39 0577 979335
Internet address
www.putschmeniconi.com
Internet address
E-Mail
dzindo@cbn.net.id
E-Mail
info@putschmeniconi.com
Stand
Hall 13, B82 (Page 540)
Stand
Hall 11, F09 (Page 536)
Product Overview
glasstec.01.02.01
PT. Dyson Zedmark Indonesia
Refractory materials
Product Details
glasstec.01.02.01
PT. Dyson Zedmark Indonesia
Refractory materials
Product Overview
Putsch Meniconi S.p.A.
glasstec.01.06.05
Shear blades
glasstec.01.06.07
Press machines
glasstec.01.06.09
Spinning machines
glasstec.02.01.01.01
Cutting technology for float glass
glasstec.02.01.01.02
Cutting technology for laminated safety glass
glasstec.02.01.02
Glass saws
Domestic Fire Ceramics
Gas Fire Ceramics
Firebacks
Gas Fire Coals
Gas Fire Driftwood
Gas Fire Logs
Gas Fire Pebbles
Gas Fire Radiants
© 2010 Messe Düsseldorf GmbH
439
© 2010 Messe Düsseldorf GmbH
440
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.06.07
Putsch Meniconi S.p.A.
Take out vertical run power motor: 0,4 Kw.
Press machines
glasstec.01.06.09
Spinning machines
ELECTRIC PRESS EPM 350
AUTOMATIC SPINNING MACHINE CRA 2000
EPM 350/6 is a multi-station press with rotary table.
The machine is equipped of a pressing system with
electronic start that permits to define the exact pressing features for each mould present on the table . The
pressing is made by a special manufactured ball screw.
The stations on the table are equipped with adjustable
cooling systems, tree are temporised by solenoid valves.
The CRA 2000 is a spinning machine with rotary table, with electric/electronic drive of the latest generation. The main characteristic that distinguishes this machine from the existing ones available on the market is
the possibility of simultaneously manufacturing 2 items
with different shapes and dimension, up to a max. diameter and height of 100 mm.
The male has its own temporised cooling system.
Obviously all the accessories of the machine, shears unit, take out and ring
supporting arms to cover the mould, are designed to carry out this function:
they are automatically positioned according to the mould and the items being
produced.
TECHNICAL DETAILS:
Articles dimensions: mm 350 x 350 for enclosed mould, mm 200 x 350 for extendable mould. Moulds weight: 80 Kg. Positions on the table: 6 o 4. It can
work with: 2, 4, 3, 6 moulds. Table diameter: 1380 mm. Rotary table motor power: 5,5 Kw controlled by an inverter Speed table rotation: adjustable.
Pressing features: 10 t. Pressing motor power: 4,4 Kw. Pressing run: 500 mm.
Advancement speed: 160 mm/s. Cooling Fun: 3 Kw. Pneumatic system: 6
BAR. Electric power requirement: 15 Kw.
The machine can be equipped with a shear group for glass cutting and with a
take out to extract the article by the mould and for the following positioning on a
conveyor belt.
The shear group has 3 mechanic positions adjustment. The advancement of the
cutting group and the cut are started by two pneumatic cylinders.
Advancement cutting group: 400 mm.
TECHNICAL DETAILS:
Electric power requirement: 25 Kw. Centrifugation motor: 13,2 Kw. Automatic cooling unit for moulds and items by means of cooling fan: 3 Kw. Nr.2
ring supporting arms to cover the mould with automatic insertion with controlled
preloading. Nr.1 take out (pliers or vacuum pump) with variable stroke and grip.
Nr.1 pneumatic motor-driven shears unit with automatic positioning. Pneumatic
system: 6 BAR. Vacuum pump: pneumatic. Self centring spindles: diameter
250mm.
MACHINE DIMENSIONS:
Length: 3400 mm. Width: 2530 mm. Height: 3100 mm. Net weight: 3500 Kg.
MACHINE CONTROL
Electric/electronic control cabinet, disjointed from the machine, equipped with:
Modular PLC. Centrifugation digital frequency converter: 11 Kw. Digital frequency converter for table displacement: 5,5 Kw. Supervision software for machine programming, by means of PC with Touch Screen technology.
The take-out has two movements horizontal and vertical.
The horizontal one is realized by a no stem cylinder and a ball slide way.
The vertical one is realized by a ball screw started by an electric motor with
programmable position control.
CONTROL CABINET DIMENSIONS:
Length: 1000 mm.
No stem cylinder horizontal run: 750 mm.
Width: 600 mm.
Ball screw vertical run: adjustable.
Height: 1800 mm.
© 2010 Messe Düsseldorf GmbH
441
© 2010 Messe Düsseldorf GmbH
442
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Net weight: 300 Kg.
Rath AG
Pyrotek Engineering Materials Ltd.
Address
Am Schellberg 20 A
41516 Grevenbroich
Germany
Address
Walfischgasse 14
1015 Wien
Austria
Phone
+43 1 5134427-0
Fax
+43 1 5134427-87
Internet address
www.rath-group.com
E-Mail
info@rath-group.com
Stand
Hall 13, C24 (Page 540)
Phone
+49 2182 81020
Fax
+49 2182 825220
Internet address
www.pyrotek.info
E-Mail
grevenbroich@pyrotek-inc.com
Product Overview
Stand
Hall 13, E46 (Page 540)
glasstec.01.02.01
Rath AG
Refractory materials
Product Details
Product Overview
Rath AG
Pyrotek Engineering Materials Ltd.
glasstec.01.02.01
glasstec.01.02.01
Refractory materials
glasstec.01.06.05
Shear blades
glasstec.02.11.02
Replacement and spare parts
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
Refractory materials
Porrath/Alporit
Product Details
glasstec.01.02.01
Unsere Feuerleichtsteine Porrath und Alporit umfassen
das komplette Sortiment für Anwendungen bis 1840°C.
Pyrotek Engineering Materials Ltd.
Refractory materials
Die Abstufung der chemischen Zusammensetzung sowie
der Klassifikationstemperatur erlaubt für jeden Anwendungstemperaturbereich die Auswahl des optimalen
Produkts.
Die Rohdichte ist so eingestellt, dass im Anwendungsbereich die minimale
Wärmeleitfähigkeit erzielt wird.
Feuerfestformen und Gießmassen
© 2010 Messe Düsseldorf GmbH
Die chemischen und physikalischen Eigenschaften unserer Steine repräsentieren das internationale Spitzenniveau.
443
© 2010 Messe Düsseldorf GmbH
444
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
REDWAVE - a trademark of BT-Wolfgang Binder
GmbH
Einsatzgebiete:
Address
Mühlwaldstr. 21
8200 Gleisdorf
Austria
Hinterisolierung von Glasschmelzwannen
Phone
+43 3112 8377-0
Isolierung im Bereich des Zinnbades bei Flachglasproduktion Kraftwerksanlagen Stahlindustrie
Fax
+43 3112 8377-2204
Internet address
www.redwave.at
E-Mail
office@redwave.at
Stand
Hall 15, A13-A (Page 552)
Ofenanlagen für die keramische Industrie
Tunnel-, Herdwagen- und Haubenöfen Porzellanindustrie chemische und petrochemische Industrie Glasindustrie
Hochöfen
Winderhitzer
Koksofenbatterien NE-Metallindustrie
Isolierung von Anodentieföfen und Kammerdeckeln Zement- und Kalkindustrie
Die Vorteile sind:
hohe Festigkeiten hervorragende Heißeigenschaften wie Druckerweichen geringes
Druckfliessen, gute Temperaturwechselbeständigkeit
Product Overview
REDWAVE - a trademark of BT-Wolfgang Binder GmbH
glasstec.01.03.09
Colour sorting (cullet)
glasstec.01.03.06
Cullet preparation
glasstec.02.12.01
Treatment of used glass
glasstec.01.03.07
Refuse collection and glass recycling
Refractory Systems
SPIRATH (Spinell bricks)
ESCORATH (Chromecontent bricks)
KORRATH (Corundum bricks)
ALURATH (Mullite bricks)
ZIRRATH (Zirconsilicate bricks)
CARATH (Castables, Moratars, Mixers)
Product Details
ALSITRA (Alumosilicate fibre materials)
glasstec.01.03.09
ALTRA (Fibre materials based on Alumina)
REDWAVE - a trademark of BT-Wolfgang Binder GmbH
Colour sorting (cullet)
REDWAVE C
PORRATH / ALPORIT (Insulating bricks)
The REDWAVE C is an optical sorting machine, which is used either for colour
improvement of presorted flint, green or amber glass or for full colour sorting of
mixed broken glass. This sorting machine is fed over the entire sorting width
with a constant material flow by means of a vibrating feeder.
Sensor systems:
© 2010 Messe Düsseldorf GmbH
445
© 2010 Messe Düsseldorf GmbH
446
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
high-resolution RGB camera
Sensorsysteme :
Machine datas:
Infrarot Technik – zur Aussortierung von Keramik, Steinen, Porzellan und Metallen (IR)Zeilenkamera Technik – zur Farbverbesserung oder zur farblichen Trennung von Mischglas (C)Röntgen-Fluoreszenz-Technik – zur Ausscheidung von
bleihaltigen und hitzebeständigen Gläsern (XRF)
Sorting width fro 1.000 to 1.300mm Cullet size from 3 to 60mm Design: 2-way
or 3-way machine Capacity: up to 12 tph (depending on the cullet size)
glasstec.01.03.06
Cullet preparation
Zerkleinerungstechnik Sieben, Sichten und Trocknen Sensorgestützte Sortiertechnik Fördern
REDWAVE XRF-G
Die REDWAVE XRF-G ist eine Sortiermaschine, welche in erster Linie zur Ausscheidung von Bleiglas und Glaskeramik verwendet wird. Mittels Röntgen-FluoreszenzSpektroskopie wird Glas anhand seiner chemischen Zusammensetzung analysiert
und bewertet. Dabei wird nach bestimmten Elementen, wie zum Beispiel Titan, Zink, Zirkonium oder Blei gesucht, welche eine eindeutige Zuordnung der
Glassorte ermöglichen. Unerwünschte Teile werden sicher erkannt und ausgeschieden. Entwickelt wurde diese Sortiermaschine in Zusammenarbeit mit
dem amerikanischem Unternehmen Innov-X-Systeme, das auf die RöntgenFluoreszenz Technologien spezialisiert ist.
Refmon Zrt.
Address
Bereki út 1.
9200 Újudvar
Hungary
Phone
+36 96 578578
Fax
+36 96 578577
Internet address
www.refmon.hu
E-Mail
refmon@refmon.hu
Ausscheidung von Glaskeramik und bleihaltigem Glas mit nur einer einzigen
Sortiermaschine in einem Verfahrenschritt auch bei stark verschmutztem Glas
und anderen Beeinträchtigungen ist eine sehr gute Abscheidung von Störstoffen
gewährleistet
Stand
Hall 10, A28 (Page 534)
glasstec.01.03.07
glasstec.01.02.01
Refractory materials
Ausscheiden von Störstoffen:
glasstec.01.04.03
Smelting technology for tank furnaces
Keramik, Steine, Porzellan Metalle Glaskeramik (hitzebeständige Gläser) Bleihaltige Gläser Organische Störstoffe Kunststoffe Korken Papier
glasstec.01.04.04
Smelting technology for pot furnaces
glasstec.01.04.13
Feeder colouring
Sensorsystem:
EDXRF Energiedispersives Röntgen-Fluoreszenz-Spektrometer
Maschinendaten:
Sortierbreite von 760 mm bis 1370 mm Durchsatzleistung: bis 28 t/Std. (abhängig von Aufgabenstellung und Korngröße)
Vorteile:
Refuse collection and glass recycling
Product Overview
Refmon Zrt.
Innovative Sortierverfahren
Sortieren und Gewinnen von:
Hochwertigem Weißglas Hochwertigem Grünglas Hochwertigem Braunglas
Als Ihr Partner in der Aufbereitung von Altglas bieten wir die innovativsten Sortierverfahren, um eine noch nie da gewesene Reinheit des sortierten Materials zu
gewährleisten.
© 2010 Messe Düsseldorf GmbH
447
© 2010 Messe Düsseldorf GmbH
448
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.06.02
Ball feeder
Product Details
glasstec.01.06.16
Spray Systems for gob forming
glasstec.01.02.01
RHI Glas GmbH
Refractory materials
Schmelzgegossene Produkte
Product Details
glasstec.01.02.01
Refmon Zrt.
Refractory materials
Heute ist REFEL ein integrierter Bestandteil der Gruppe RHI Refractories, in
der jetzt alle Aktivitäten für die Glasindustrie in der weltweit operierenden RHI
Gruppe konzentriert sind. REFEL wurde 1986 gegründet und 1993 in die Didier
Gruppe eingegliedert. Im Jahre 1995 übernahm die RHI Gruppe die DidierWerke AG.
Feeder parts
Tubes, plungers, rotors, stirrers, orifice rings, burner
blocks, cover blocks, spouts
REFEL mit Sitz in San Vito al Tagliamento, Italien, produziert ausschließlich
schmelzgegossene AZS-Produkte für die Glasindustrie mit Fokussierung auf
technisch hochwertige Materialien, die die Erfordernisse des Marktes erfüllen.
Diese sind insbesondere das Erzielen längerer Ofenreisen, verbesserter Ofenleistung bzw. -auslastung bei erhöhter Glasqualität. REFEL ist sehr erfolgreich
bei der Fertigung von Feuerfest -Materialien mit komplexer Geometrie, die für
die Herstellung von Sonderglas oft benötigt werden.
RHI Glas GmbH
Address
Hagenauer Str. 53-55a
65203 Wiesbaden
Germany
Phone
+49 611 2365297
Fax
+49 611 2365535
Internet address
www.rhi-ag.com
E-Mail
glass@rhi-ag.com
Stand
Hall 13, B91 (Page 540)
Product Overview
glasstec.01.02.01
Die REFEL-Sortennamen stehen für hochwertige, erstklassige Feuerfest Produkte und für eine kundenorientierte Dienstleistung seit Bestehen der Gesellschaft.
RHI Refractories und damit REFEL S.p.A. werden sich weiterhin sorgfältig der
Fertigung von spezieller und kundenorientierter Feuerfest -Produkte für Schmelzöfen
und Nebenanlagen in der Glasindustrie widmen.
Die anerkannte Qualität der Produkte und Dienstleistungen von RHI Refractories stützt sich auf sorgfältig ausgesuchte und geprüfte Rohmaterialien. Die
Fertigungsanlagen arbeiten mit Stand der Technik. Dazu kommen die praxisorientierte Forschung und Entwicklung in den eigenen Laboratorien in San Vito
al Tagliamento, Italien, und Leoben, Österreich. Der Erfolg beruht auch auf die
langjährige Erfahrung der Mitarbeiter im Verkauf, Marketing und Forschungsabteilungen. Folglich sieht sich RHI Refractories nicht nur als zuverlässiger Lieferant von
hochwertigen Feuerfest-Materialien sondern auch als Partner der Glasindustrie.
RHI Glas GmbH
Refractory materials
© 2010 Messe Düsseldorf GmbH
449
© 2010 Messe Düsseldorf GmbH
450
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
ROHDE GmbH
glasstec.01.09.06
Address
Ried 9
83134 Prutting
Germany
Phone
+49 8036 674976-0
Fax
+49 8036 674976-19
Internet address
www.rohde-online.net
E-Mail
info@rohde-online.net
Stand
Hall 09, D25 (Page 532)
Product Overview
Die ROHDE-Fusingofenserie stellt den neuesten Stand der
Ofentechnik dar und ermöglicht Ihnen eine sichere und effektive Bearbeitung von Glas. In der Konzeption unserer
Fusingöfen haben wir darauf geachtet, moderne Konstruktionsprinzipien sowie die neuesten Materialien anzuwenden. So ist der gesamte Stahlbau verwindungssteif konstruiert. Bauteile, die regelmäßig mit Wärme beaufschlagt
werden, sind in Edelstahl ausgeführt. Solide Lenkrollen am
Ofengestell sorgen für eine größtmögliche Flexibilität bei der Organisation Ihrer
Werkstatt
glasstec.01.04.08
Electrically heated systems
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.01.09.04
Decorating lehrs
Pre-heating furnaces
glasstec.01.09.06
Fusing Kiln
© 2010 Messe Düsseldorf GmbH
Fusing Kiln
ROHDE Elektro-Fusingöfen
ROHDE GmbH
glasstec.01.09.05
ROHDE GmbH
Die Hauben der Ofengrößen 75 bis 1000 sind gasdruckfederunterstützt und ermöglichen so ein äußerstLeichtes und sicheres Öffnen des Deckels. Optional
ist für alle ROHDE-Fusingöfen eine elektrisch betätigte Deckelöffnung wählbar.
Der Isolierausbau unserer Fusingöfen ist eine Kombination aus einer soliden
Arbeitsfläche aus Isolierstein (wahlweise mit Fasermatten-Belag) und einem
hochwertig verarbeiteten Faserdeckel. Dabei achten wir vor allem bei der Verarbeitung der Faser auf eine saubere und abriebfeste Oberfläche, um unnötigen
Befall oder Verschmutzung des Produktes zu vermeiden. Die Schaulöcher sind
seitlich angebracht – einerseits um wiederholten Befall bei geöffnetem Deckel zu
verhindern, andererseits erhalten Sie dadurch einen größtmöglichen Überblick
über den gesamten Brennraum.
In allen Fusingöfen kommen hochwertige Infrarot-Quarzstrahler zum Einsatz,
die Leistungsreglung erfolgt über Halbleiterschalter. Diese Schütze schalten absolut geräuschlos und unterliegen einem äußerst geringen Verschleiß. Die Kombination aus Faserisolierung, Beheizung durch Quarzstrahler sowie die Leistungsreglung über Halbleiterschalter lassen eine sehr exakte und sichere Brennführung zu.
451
© 2010 Messe Düsseldorf GmbH
452
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
are required to get the electrical energy to the work. The cost of these copper bus
bars including installation, isolation, maintenance, etc. can be a substantial. The
volatility in copper prices can also cause trouble for estimation and installation
costs.
RoMan Manufacturing, Inc.
Address
861 - 47th Street S.W.
49509 Grand Rapids
USA
Phone
+1 616 530-8641
The requirement for the long copper bus being added to the system causes
voltage drops due to resistance and reactance losses. These losses (voltage
drops) drive primary power demand up for the entire system.
Fax
+1 616 530-8953
In many cases an alternative system utilizing, compact, fully encapsulated,
water-cooled transformers, can replace an air/oil-cooled system. (See Fig.2)
Internet address
www.romanmfg.com
E-Mail
sales@romanmfg.com
Stand
Hall 13, C49-5 (Page 540)
Company News
06/21/2010
The water cooled transformers are only 1/3 to 1/4 the size of the equivalent
air/oil-cooled models. This means water-cooled transformers can be located
(closely coupled) to where the work is being done, in many cases as close as
1-20 meters.
RoMan Manufacturing, Inc.
The reduction in secondary bus length depending on secondary voltage and
current requirements can offer substantial equipment and electrical savings of
5-40%.
Saving Money and Energy with “Close Coupled”
Transformers
The smaller size of the water-cooled units can also offer installation benefits
such as saving space, easier to move, less structure required to mount them
due to much lower weight, etc.
This article further expands on the excellent, recent articles
by Mr. Stuart Hakes of FIC and Mr. Richard Stormont of
Electroglass regarding the use of electrical heating/boosting
to augment and in many cases improve the overall energy
efficiency of various glass production processes.
This article will expand on additional concepts/ideas to improve the electrical efficiency of the electrical melting/heating
systems and also reduce installation costs.
Through much investigation into various glass electrical, heating, melting, and
boost systems it can be seen that the majority of these systems utilize air-cooled
and in some instances oil-cooled transformers.
For many reasons such as, high ambient temperatures, limited space, dirty environments, safety, etc. the air/oil-cooled transformers are generally installed
long distances from the furnace or heating elements they are connected to. The
distances can vary from 20 meters to 250 meters away. (See Fig.1)
Due to the application voltages and high currents required for most electrical
melting, heating, and boost applications, large, long, copper bus bars and cables
© 2010 Messe Düsseldorf GmbH
Due to complete encapsulation and water cooling, the water-cooled transformers can withstand a very dirty and high ambient temperature environment. The
close proximity to the work also means the use of smaller and much shorter copper bus and cables to connect to the electrodes, or other heating elements such
as platinum, silicon carbide, etc.
453
It is important to point out that water-cooled transformers are not totally new
to the glass industry however most water-cooled transformer designs originally
“spawned” from air-cooled models and were not very efficient at heat transfer
and were quite large and used high volumes of water. The newest water-cooled
transformer designs are much smaller, high heat transfer type, utilizing special
insulation and manufacturing techniques that allow these new cost saving application possibilities. Typical water consumption for a 60-300 KVA high efficiency
boost/melting transformer is (4-7.5 LPM) with a delta pressure drop of under
(.8-Bar) Input water temperature of 30-35 degrees centigrade.
The close coupled water-cooled solution is not for all applications, investigations
and applications over the last few years have shown savings possibilities in over
75% of the glass applications accessed.
With increasing energy costs and new corporate commitments by many large
glass manufacturers to reduce their “global energy footprint” this concept can
offer substantial savings and make heroes out the energy “czar.” Most systems
© 2010 Messe Düsseldorf GmbH
454
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
also have an ROI of 12-24 months.
Romeca
About the author: Don DeCorte is a Certified Electronic Technician with 30 years
of experience in SCR, IGBT control and high current transformer applications.
He is currently a principal and V.P. of Sales and Marketing for RoMan Manufacturing, Inc. in Grand Rapids Michigan-USA. You are welcome to contact Don at:
ddecorte@romanmfg.com or 1-616-530-8641.
Product Overview
glasstec.01.04.08
RoMan Manufacturing, Inc.
Electrically heated systems
Product Details
glasstec.01.04.08
RoMan Manufacturing, Inc.
Electrically heated systems
Address
Herderstraat 4
8700 Tielt
Belgium
Phone
+32 51 403806
Fax
+32 51 401567
Internet address
www.romeca.be
E-Mail
info@romeca.be
Stand
Hall 13, C08 (Page 540)
Resistance Heating
RoMan manufactures a many custom AC and DC Power Sources specifically
designed for resistance heating. These power sources can be found, but are
not limited to the following processes:Heat Heat
Treating / Hardening
Resistance Heating
Product Overview
Romeca
glasstec.01.09.01
Transport systems
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.03
Conveying, sorting and storage facilities
glasstec.01.13.06
Glass racks for transport and warehouse
glasstec.01.13.07
Vehicles for glass transport
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
glasstec.02.10.03
Waste water treatment equipment
glasstec.02.11.02
Replacement and spare parts
glasstec.04.04
Replacement part, wearing parts
Annealing
Upsetting
© 2010 Messe Düsseldorf GmbH
455
© 2010 Messe Düsseldorf GmbH
456
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.13.07
Romeca
Vehicles for glass transport
Product Details
glasstec.01.02.01
Vehicles for glass
Ruitai Materials Technology Co., Ltd.
Refractory materials
AZS Ramming Materials
Product Name AZS ramming materials
Ruitai Brand RT-ZR
Main Application Paver Substrate
RUREX-STAHL, Dr. Otto Kukla GmbH
Ruitai Materials Technology Co., Ltd.
Address
Main Bldg, China Building Materials,
100024 Beijing
China (Rep.)
Phone
+86 10 65715470
Fax
+86 10 65713724
Internet address
www.bjruitai.com
E-Mail
riutai@bjriutai.com
Stand
Hall 13, D66 (Page 540)
Address
Steinhof 37
40699 Erkrath
Germany
Phone
+49-211-2430-14
Fax
+49-211-2434-00
Internet address
www.rurex.de
E-Mail
info@rurex.de
Stand
Hall 13, B34 (Page 540)
Product Overview
Product Overview
glasstec.01.02.01
RUREX-STAHL, Dr. Otto Kukla GmbH
Ruitai Materials Technology Co., Ltd.
glasstec.01.05.03
Casting and rolling technology
glasstec.01.06.05
Shear blades
Refractory materials
© 2010 Messe Düsseldorf GmbH
457
© 2010 Messe Düsseldorf GmbH
458
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.05.03
RUREX-STAHL, Dr. Otto Kukla GmbH
Casting and rolling technology
Product Details
glasstec.01.02.01
SOLAR GLASS FORMING MACHINES
S.I.G.M.A. S.r.l.
Refractory materials
Furnace Refractories
Forming machines for pattern, wired and profile glass.
Special forming machines for low iron glass for the PVmodules for the Solarindustry
(SOLARGLASS)
glasstec.01.06.05
Shear blades
High Quality Shear Blades in different alloys
Beside the standard steel ”HS/80” we are supplying
shear blades in a new powder metallurgical steel ”HS/K”
and in high temperature material ”Stellite”. Latest development is a full Ceramic Shear blade with longlife
performance.
Saint-Gobain SEFPRO
S.I.G.M.A. S.r.l.
Address
Phone
Via Delle Grigne, 12/A
22070 Locate Varesino / CO
Italy
Address
Route de Lyon - Bat. L
84131 Le Pontet Cedex
France
Phone
+33 4 90327249
Fax
+33 4 90327113
Internet address
www.sefpro.com
E-Mail
communication.sefpro@saint-gobain.com
Stand
Hall 13, A72 (Page 540)
+39 0331 823195
Fax
+39 0331 823198
Internet address
www.sigmaref.it
E-Mail
sigmaref@tin.it
Stand
Hall 13, D55 (Page 540)
Product Overview
glasstec.01.02.01
Product Overview
glasstec.01.02.01
Saint-Gobain SEFPRO
Refractory materials
S.I.G.M.A. S.r.l.
Refractory materials
© 2010 Messe Düsseldorf GmbH
459
© 2010 Messe Düsseldorf GmbH
460
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.02.01
Saint-Gobain SEFPRO
Sintered Mullite
In the range of Sillimanite and Mullite basis products,
Refractory materials
Saint-Gobain SEFPRO present a complete line dedicated to the Glass Industry, with leading products such
as ARKAL 65V and forehearths monolithic roof blocks,
or BP Mullite for high temperature and high spans (up
ab Alumina JARGAL M
The typical glass contact materials for the end zones
of furnaces (working-end, feeder channels) when glass
quality is the priority : TV Glass, high quality container
glass, float glass.
b Alumina JARGAL H IMP
SCHRADER Glasformenbau GmbH & Co. KG
Its neutrality against soda vapors makes it the best choice
for the downstream part of superstructures in demanding
applications.
Address
Rehwinkel 2-6
32457 Porta Westfalica
Germany
Phone
+49 5731 7606-0
Fax
+49 5731 7606-30
Internet address
www.schrader-gfb.de
E-Mail
info@schrader-gfb.de
Stand
Hall 13, B21 (Page 540)
Lip stones
Lip stones are not standard items available from inventory. They are tailor-made to glassmakers’ specific
drawings. However Saint-Gobain SEFPRO does provide its clients with the possibility of maintaining minimum stock, as per the agreed-upon sales conditions. Each Saint-Gobain SEFPRO lip stone has an identification number and is individually inspected for compliance with specifications: dimensions, flatness, aspect, straightness of the lip
and the pouring table, and others.
Product Overview
Monolithics
Saint-Gobain SEFPRO offers the Worldwide glass industry a full range of Unshaped Products. These materials have been specifically designed to complete SEFPRO global offers (Bricks and blocks), both for Electrofused and Sintered products. All the potential application areas are covered (Paving Sub-Layers, hot and
cold repairs, jointing).
SCHRADER Glasformenbau GmbH & Co. KG
glasstec.01.06.13
Moulds for glass production
glasstec.02.03.05
Polishing technology
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
Product Details
SCHRADER Glasformenbau GmbH & Co. KG
to 9 meters) reinforcement glass fiber furnace crowns.
glasstec.01.06.13
Moulds for glass production
Tibotherm
© 2010 Messe Düsseldorf GmbH
461
© 2010 Messe Düsseldorf GmbH
462
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Pegel für PB, PBW, NNPB
-Borierte Oberfläche und Materialbeschaffenheit als Gebrauchsmuster
national undinternational geschützt (nat.Nr.639883/inter.Nr.2091276)
- Oberflächenhärte 1900 Vickers - Grundhärte 60 HRC - Maßgenauigkeit innerhalb 0,02mm - Universell einsetzbar bei Enghalsund Weithalsgefäßen und EPB-Verfahren - Hohe Wirtschaftlichkeit
- Preiswerter als jeder andere Pegel
glasstec.01.04.08
Electrically heated systems
glasstec.02.11.03
Insulating C203materials
Product Details
glasstec.01.02.01
SCHUPP Industriekeramik GmbH & Co. KG
Refractory materials
M.E.SCHUPP®MolyCom®-Ultra
MADE IN GERMANY: Molybdenum Disilicide Electric
Heating Elements up to 1,800°C
SCHUPP Industriekeramik GmbH & Co. KG
Address
In-house productions in Aachen at M.E.SCHUPP owned
plant.
Neuhausstr. 4-10
52078 Aachen
Germany
High purity grade available: MolyCom®-Hyper
Very high surface load (25 W/cm2) at 1,600°C
Complex heating element geometrics on customer´s demand
Phone
+49 241 93677-0
Fax
+49 241 93677-15
Internet address
www.schupp-ceramics.com
E-Mail
info@schupp-ceramics.com
Stand
Hall 13, E40 (Page 540)
Maximum surface temperature: 1,800°C
Standard dimensions: 3/6 mm, 4/9 mm, 6/12 mm, 9/18 mm, 12/24 mm
U-/L- and W-shapes
Lengths from 100 to > 2,000 mm
Individual production according to customer requirements
All accessories such as holders and contact straps.
M.E.SCHUPP®-MolyTec
Product Overview
SCHUPP Industriekeramik GmbH & Co. KG
glasstec.01.02.01
Refractory materials
glasstec.01.04.02
Forehearth technology
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.04
Smelting technology for pot furnaces
ENGINEERED AND MADE IN GERMANY Electric Heating Panels and Cylinders (MoSi2 + Al2O3) for fast heating and cooling by using MolyCom, UltraBoard & UltraVac
High purity grades available
Very high load (25 W/cm2) at 1,600°C
Maximum surface temperature of the heating elements up to 1,800°C
© 2010 Messe Düsseldorf GmbH
463
© 2010 Messe Düsseldorf GmbH
464
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.04.02
Panel dimensions: up to 900 x 600 x 125 mm
Forehearth technology
M.E.SCHUPP® MolyCom®-Ultra
MADE IN GERMANY: Molybdenum Disilicide Electric
Heating Elements up to 1,800°C
Cylinder dimensions: up to H 1800 x 1500 mm Ø
M.E.SCHUPP MolyTec is used for the electric heating of your feeder systems.
No emissions, no contamination at your glass melt.
In-house productions in Aachen at M.E.SCHUPP owned
plant.
High purity grade available: MolyCom®-Hyper
Very high surface load (25 W/cm2) at 1,600°C
M.E.SCHUPP® UltraBoard & UltraVac
Complex heating element geometrics on customer´s
demand
Insulation boards, shapes & cylinder from polycristalline
Al2O3 Wool with an application temperature from 1,250°C
to 1,850°C.
Maximum surface temperature: 1,800°C
Standard dimensions: 3/6 mm, 4/9 mm, 6/12 mm, 9/18 mm, 12/24 mm
U-/L- and W-shapes
Lengths from 100 to > 2,000 mm
Individual production according to customer requirements
UltraBoard is a real alternative to common amorphous ceramic fibers.
All accessories such as holders and contact straps.
Available as boards, needled mats, bulk wool, modules and paper.
M.E.SCHUPP® MolyTec
Provides a long life cycle due to very low shrinkage.
ENGINEERED AND MADE IN GERMANY. Electric
Heating Panels and Cylinders (MoSi2 + Al2O3) for fast
heating and cooling by using MolyCom, UltraBoard &
UltraVac.
High bending strength and form stability.
Thicknesses from 20 mm to 100 mm.
High purity grades available
Standard dimensions: 900 x 600 mm boards.
Very high electric surface load (25 W/cm2) at 1,600°C
Maximum surface temperature of the heating elements up to 1,800°C
Panel dimensions: up to 900 x 600 x 125 mm
© 2010 Messe Düsseldorf GmbH
465
© 2010 Messe Düsseldorf GmbH
466
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.04.03
Cylinder dimensions: up to H 1800 x 1500 mm Ø
Smelting technology for tank furnaces
M.E.SCHUPP® MolyTec
M.E.SCHUPP Molytec is used for the electric heating of your feeder systems.
No emissions, no contamination at your glass melt.
M.E.SCHUPP® UltraBoard & UltraVac
ENGINEERED AND MADE IN GERMANY Electric Heating Panels and Cylinders (MoSi2 + Al2O3) for fast heating and cooling by using MolyCom, UltraBoard & UltraVac
Insulation boards, shapes & cylinder from polycristalline
Al2O3 Wool with an application temperature form 1,250°C
to 1,850°C.
High purity grades available
UltraBoard is the real alternative to common amorphous ceramic fibers,
Very high electric surface load (25 W/cm2) at 1,600°C
available as boards, needled mats, bulk wool, modules and paper.
Maximum surface temperature of the heating elements up to 1,800°C
Provides a long life cycle due to very low shrinkage.
Panel dimensions: up to 900 x 600 x 125 mm
High bending strength and form stability.
Cylinder dimensions: up to H 1800 x 1500 mm Ø
Thicknesses from 20 mm to 100 mm
M.E.SCHUPP Molytec is used for the electric heating of your feeder systems.
No emissions, no contamination at your glass melt.
glasstec.01.04.04
Standard dimensions: 900 x 600 mm boards
Smelting technology for pot furnaces
M.E.SCHUPP®MolyCom®-Ultra
MADE IN GERMANY: Molybdenum Disilicide Electric
Heating Elements up to 1,800°C
In-house productions in Aachen at M.E.SCHUPP owned
plant
High purity grade available: MolyCom®-Hyper
Very high surface load (25 W/cm2) at 1,600°
Complex heating element geometrics on customer´s
demand
© 2010 Messe Düsseldorf GmbH
467
© 2010 Messe Düsseldorf GmbH
468
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
M.E.SCHUPP® UltraBoard & UltraVac
Maximum surface temperature: 1,800°C
Standard dimensions: 3/6 mm, 4/9 mm, 6/12 mm, 9/18 mm, 12/24 mm
Insulation boards, shapes & cylinder from polycristalline
Al2O3 Wool with an application temperature form 1,250°C
to 1,850°C.
U-/L- and W-shapes
Lengths from 100 to > 2,000 mm
Individual production according to customer requirements
All accessories such as holders and contact straps.
UltraBoard is the real alternative to common amorphous ceramic fibers,
M.E.SCHUPP® MolyTec
available as boards, needled mats, bulk wool, modules and paper.
ENGINEERED AND MADE IN GERMANY Electric Heating Panels and Cylinders (MoSi2 + Al2O3) for fast heating and cooling by using MolyCom, UltraBoard & UltraVac
Provides a long life cycle due to very low shrinkage.
High bending strength and form stability.
High purity grades available
Thicknesses from 20 mm to 100 mm.
Very high electric surface load (25 W/cm2) at 1,600°C
Standard dimensions: 900 x 600 mm boards.
Maximum surface temperature of the heating elements up to 1,800°C
glasstec.01.04.08
Electrically heated systems
M.E.SCHUPP®MolyCom®-Ultra
Panel dimensions: up to 900 x 600 x 125 mm
MADE IN GERMANY: Molybdenum Disilicide Electric
Heating Elements up to 1,800°C
Cylinder dimensions: up to H 1800 x 1500 mm Ø
In-house productions in Aachen at M.E.SCHUPP owned
plant
M.E.SCHUPP Molytec is used for the electric heating of your feeder systems.
No emissions, no contamination at your glass melt.
High purity grade available: MolyCom®-Hyper
Very high surface load (25 W/cm2) at 1,600°
Complex heating element geometrics on customer´s
demand
Maximum surface temperature: 1,800°C
Standard dimensions: 3/6 mm, 4/9 mm, 6/12 mm, 9/18 mm, 12/24 mm
U-/L- and W-shapes
© 2010 Messe Düsseldorf GmbH
469
© 2010 Messe Düsseldorf GmbH
470
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Lengths from 100 to > 2,000 mm
Sheppee International Ltd
Individual production according to customer requirements
All accessories such as holders and contact straps.
Address
Halifax Way, Airfield Business Park,
YO41 4AU Elvington, York
United Kingdom
Phone
+44 1904 608999
Fax
+44 1904 608777
Internet address
www.sheppee.com
E-Mail
sales@sheppee.com
Stand
Hall 13, E41 (Page 540)
M.E.SCHUPP® MolyTec
ENGINEERED AND MADE IN GERMANY Electric Heating Panels and Cylinders (MoSi2 + Al2O3) for fast heating and cooling by using MolyCom, UltraBoard & UltraVac
High purity grades available
Very high electric surface load (25 W/cm2) at 1,600°C
Product Overview
Maximum surface temperature of the heating elements up to 1,800°C
glasstec.01.06.12
Panel dimensions: up to 900 x 600 x 125 mm
Product Details
Cylinder dimensions: up to H 1800 x 1500 mm Ø
glasstec.01.06.12
Sheppee International Ltd
Bottle and glass container machines
Sheppee International Ltd
Bottle and glass container machines
AWT-1000
M.E.SCHUPP Molytec is used for the electric heating of your feeder systems.
No emissions, no contamination at your glass melt.
© 2010 Messe Düsseldorf GmbH
471
AWT-1000 For High Speed and Unstable Containers
© 2010 Messe Düsseldorf GmbH
472
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.01.09.05
Pre-heating furnaces
Sklostroj Turnov CZ, s.r.o.
Address
Preperska 210
511 01 Turnov
Czech Republic
Phone
Product Details
glasstec.01.06.01
+420 481 350200
Sklostroj Turnov CZ, s.r.o.
Gob feeder
Feeders
Fax
+420 481 350222
Internet address
www.sklostroj.cz
E-Mail
sklostroj@sklostroj.cz
Stand
Hall 13, B77 (Page 540)
Company News
07/15/2010
Please, visit our website www.sklostroj.cz for more details.
LPBB Technology
Sklostroj Turnov CZ, s.r.o.
Technology for production of the glass bottles on IS machines developed in the cooperation with the company
GTI.
Party
Sklostroj organizes party to celebrate 60 years of company.
It is BB (Blow & Blow) technology with assistance of vacuum in the blank moulds.
This vacuum is generated from the compressed air by patented vacuum generator with high efficiency and with self-cleaning effect.
Place: booth B77, Hall 13
Date: September 30th
Time: from 18:30
Product Overview
Sklostroj Turnov CZ, s.r.o.
glasstec.01.06.01
Gob feeder
glasstec.01.06.12
Bottle and glass container machines
glasstec.01.06.13
Moulds for glass production
glasstec.01.09.02
Stacker systems
© 2010 Messe Düsseldorf GmbH
Main benefits:
- quality improvements, as there is better glass distribution in the walls of bottles
and significant reduction of settle wave when compared to ordinary BB production.
- Opportunity for light-weighting – approximately 10% lighter bottles in the comparison to ordinary BB production.
473
© 2010 Messe Düsseldorf GmbH
474
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
SMT Lager- und Transportsysteme GmbH
- Opportunity to increase the production speed by about 3.3% thanks quicker
forming of neck and eventual less weight of bottles.
LPBB technology je applicable on any IS machines with electronic timing system.
glasstec.01.06.12
Address
Syker Str. 205-213
27321 Thedinghausen
Germany
Phone
+49 4204 174795
Fax
+49 4204 174797
Internet address
www.smtlog.de
E-Mail
smt-log@gmx.de
Stand
Hall 13, C16 (Page 540)
Bottle and glass container machines
IS machines
Please, visit our web sites www.sklostroj.cz fro more details.
Product Overview
ISS
Please, visit our web sites www.sklostroj.cz for further
information.
SMT Lager- und Transportsysteme GmbH
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.05
Warehouse technology
glasstec.01.13.06
Glass racks for transport and warehouse
glasstec.21.02
Special offers for glass trade / crafts
Pusher
Please, visit our web site www.sklostroj.cz for more details.
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
Annealing lehrs
Please, visit our web site www.sklostroj.cz for more details.
© 2010 Messe Düsseldorf GmbH
475
© 2010 Messe Düsseldorf GmbH
476
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
The LineScanner system combines at least all functions in one hardware system
– surface quality control, precision control, glass thickness, coating, bar code
reader and in the near future a data matrix code interpreter.
SOFTSOLUTION GmbH
Address
Kapuzinergasse 6
3340 Waidhofen an der Ybbs
Austria
Phone
+43 7442 53988
Fax
+43 7442 5398890
Internet address
www.softsolution.at
E-Mail
office@softsolution.at
Stand
Hall 15, F42 (Page 552)
Company News
07/06/2010
Product Overview
SOFTSOLUTION GmbH
NOW inside the SOFTSOLUTION LineScanner: Glass
Thickness and Coating Sensor
A great and brand new feature for the Line Scanner is the
glass thickness and coating sensor , which works fully integrated within the Line Scanner software. This new option is
now offered and sold to customers since the Vitrum Show
2009. It is the latest master piece of engineering from Softsolution and can detect glass thickness as well as coating
and coating side comfortably without touching the glass. If
there is no connection to customers’ production software,
the default coating side can be configured within the Line
Scanner master files. The Line Scanner software then finds the coating side
and compares the result with the master file settings. If the coating is on the
wrong side, the monitor software alerts the operators immediately by displaying
an error message. If there is a full integration between customers’ production
software and the Line Scanner software via transfer file, all production data like
glass thickness, coating and coating side are compared to real production data.
In case of any differences, the monitor software alerts the operators immediately
by displaying an error message as well.
© 2010 Messe Düsseldorf GmbH
477
SOFTSOLUTION GmbH
glasstec.01.10.03
Inspection systems
glasstec.02.01.01.01
Cutting technology for float glass
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
glasstec.02.13.02
Software
glasstec.03.04.04
Other accessories and services
glasstec.05.01.01.01
Measurement and control of glass position detection
glasstec.05.01.01.04
Measurement and control of glass thickness
glasstec.05.01.01.06
Measurement and control of speed
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
glasstec.05.01.03
Measuring devices to be used on site
glasstec.05.01.04
Detectors for laminated glass
glasstec.05.03.01
MRP/CAD/CIM systems
glasstec.05.03.02
Inspection, protocolling and diagnostic systems
© 2010 Messe Düsseldorf GmbH
478
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.05.03.03
Optimization systems for cutting and yield
glasstec.05.03.04
Process control systems
glasstec.05.03.05
Other control systems
little space required
vertically and horizontally mountable
data evaluation within the usual cycle times
Product Details
glasstec.01.10.03
SOFTSOLUTION GmbH
user-friendly and easy to read monitor display software
Inspection systems
SOFTSOLUTION LineScanner
scanning resolution up to 400 dpi
customer specific tolerance and display settings
For an efficient quality control the Austrian based company SOFTSOLUTION has developed scan systems
based on digital image processing which achieve excellent results for quality assurance.
comparison of customer order and actual size
full documentation and archiving of all sheets
The LINESCANNER is able to measure and identify glass with a resolution of
400 dpi (0. 0635mm) including the possibility to check drill hole or cut-out it
exists as a horizontal or vertical unit. Current applications include installations
at tempering furnaces (measure and identify glass and display the result at the
furnace exist including the possibility to print labels online (label-less production).
Other applications include measuring and quality control at an IG line (vertical
scanner).
statistics of defect quantities and production utilization just in time
fully integrated glass thickness and coating sensor
Highlights
high precision and cost efficient quality assurance system
accuracy 0.25 mm
all defects larger than 0.1 mm detectable
simple integration in existing lines
© 2010 Messe Düsseldorf GmbH
479
© 2010 Messe Düsseldorf GmbH
480
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
ronment. They provide an excellent shear cut, reduce the wear on the shear
blades, and control the development of bacteria and fungi.
Sogelub S.A.
Address
13, Rue de la Terre a Briques
7522 Marquain
Belgium
Phone
+32 69 590949
Fax
+32 69 214474
Internet address
www.sogelubglass.com
E-Mail
contact@sogelub.com
Stand
SPECIAL CERAMICS Pvt. Ltd.
Address
C-13/12, Sector-3, Rohini
110 085 Delhi
India
Phone
+91 11 27521174
Fax
+91 11 27525580
Internet address
www.specialceramics.in
E-Mail
contact@specialceramics.org
Stand
Hall 13, B38 (Page 540)
Hall 14, A02 (Page 548)
Product Overview
Sogelub S.A.
glasstec.01.02.03
Lubricators and coolants
glasstec.02.11.08.02
Chemical grinding and polishing materials
glasstec.02.11.08.03
Chemical coolants
glasstec.02.11.08.04
Chemical rust prevention agents
Product Overview
glasstec.01.02.01
SPECIAL CERAMICS Pvt. Ltd.
Refractory materials
Product Details
glasstec.02.11.08.05
Chemical protection material for glass
glasstec.02.11.08.06
Chemical cleaning agents
Product Details
glasstec.01.02.03
glasstec.01.02.01
Refractory materials
SCL REFRACTORIES
Sogelub S.A.
Lubricators and coolants
Shearspray lubricants
Our range of water-soluble fluids, SOGEVER® GREEN HV, combine lubricating efficiency with adaptability to working conditions and respect for the envi-
© 2010 Messe Düsseldorf GmbH
SPECIAL CERAMICS Pvt. Ltd.
481
SPECIAL CERAMICS (P) LTD. has been continually striving to provide better
and superior refractories to the Glass Industry by incorporating state-of-the-art
technology and implementing stringent quality control measures. This is well
illustrated by our ever-expanding range of distributor & forehearth refractories
and feeder expendables in addition to furnace and regenerator refractories. High
performance forehearth and long life feeder expendables are the recent developments.
SPECIAL CERAMICS (P) LTD., offers Mullite quality bricks and blocks under
its brand SCL-MUL which contains minimum 92% Mullite phase in the matrix.
© 2010 Messe Düsseldorf GmbH
482
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
These bricks give excellent service when used in walls and crowns of port and
regenerator.
Direct-bonded dense zircon refractories from SCL have very low levels of alkalies and alumina. These bricks give excellent results in the neutral layer of the
melter walls.
The bottom blocks for melter and distributor in Sillimanite and fireclay qualities
can be six-face ground, pre-assembled and marked as per the drawings at our
end before despatch. This ensures perfectly-matched joints and trouble-free furnace campaign. Rider arches and dog house flat arches are also pre-assembled
to close tolerances.
SCL provides complete solution for distributor and forehearth refractories. These
refractories are mainly selected on the basis of quality of glass to be produced
and expected life. As these refractories comes in contact with the molten glass
just before the exit, they leave their ’imprint’ on the quality of glass. Higher resistance to ’seeding’ and corrosion provide better production efficiency of quality
glass and longer life of the refractories. SCL has designed a unique bonding
system to attain these unique characteristics in accordance with international
quality standards.
Stewart Engineers
Address
11640 NorthPark Drive, Suite 100
27587 Wake Forest, NC
USA
Phone
+1 919 435-9100
Fax
+1 919 435-9101
Internet address
www.stewartengineers.com
E-Mail
info@stewartengineers.com
Stand
Hall 13, C48-2 (Page 540)
Some of our quality products and their special features in this area are :
Company News
• Now Feeder Channels are also supplied in SCL-99 quality containing 99.5 %
alumina, in addition to our standard qualities SCL-33 and SCL-90. This quality
consists of entirely alpha alumina phase with excellent corrosion resistance.
09/09/2010
• Channels and cover blocks are ground , matched and pre-assembled with close
tolerances
• Dense blocks in 94% Alumina and 99% Alumina qualities are supplied for distributor side walls and bottom paving. These blocks have excellent corrosion
resistance to glass and provide zirconia-cord free glass.
Stewart Engineers
AcuraCoat® Coating System Commissioning at Kibing
Stewart Engineers is pleased to announce the third successful installation of the AcuraCoat® on-line CVD system at Zhangzhou Kibing Class Company, Ltd. in the Fujian Provence, Peoples Republic of China. Commissioning of the pyrolytic system will start early September.
• Cover blocks for forehearth and distributor are supplied in one, two or three
pieces for easy installation and operation.
• Fused silica bricks are provided in different sizes for special application and
hot repair of silica crown. Fused Silica patching mass is also provided to repair smaller areas. • SCL has a unique capability to manufacture large pre-cast
single shapes each weighing more than 600 kgs.
• SCL offers Alumina-chrome tiles for hot repair of the melter at the glass level.
• SCL has Innovated a unique technique to fix inconel liner in the orifice ring for
high temperature boro-silicate glasses to improve the performance considerably.
• SCL has developed an exclusive computer-aided model for particle size distribution to ensure consistency in various properties of the refractories.
© 2010 Messe Düsseldorf GmbH
483
© 2010 Messe Düsseldorf GmbH
484
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.10.03
Product Overview
Inspection systems
Stewart Engineers
glasstec.01.05.01
Float glass technique
glasstec.01.10.03
Inspection systems
glasstec.01.11.01
UV-Absorption-Coating (pyrolytic)
glasstec.01.11.02
IR-Reflective Coating (pyrolytic)
glasstec.02.06.06
UV-Absorption - Coating (pyrolytic)
glasstec.02.06.07
IR-Reflective Coating (pyrolytic)
glasstec.03.01.01
Float and mirror glass
AIS100/AIS200-On-Line Glass and Glass Coating
Inspection Sys
The AIS 100/AIS 200 on-line Glass and Glass Coating
inspection systems have been designed to provide the
quality data needed to on-line monitor and open-loop
control CVD coatings on float glass. These systems are
of modular construction and utilizes optical technology,
allowing a scalable selection of instruments, calibrations and software that are
determined by the user’s needs. The AIS 100 is utilized at the cold end after the
annealing lehr on the open section of the inspection conveyor while the AIS 200
is employed at the earliest possible position in the process (between the float
bath and the annealing lehr or lehr A0 section).
FEATURES
glasstec.03.10.03.01.06.03
Coating of flat glas
Full Automatic or Manual Timed Cycle Scan Traverse Scan Multiple Spot Scan
Operator Adjustable Quality Alarm Levels Data Logging and Printing Local Remote Rugged and Robust Build System Capabilities Reflective Color Uniformity
Repeatability Emissivity Reflectance Coating Thickness
glasstec.06
glasstec.01.11.01
Contracting, consulting, engineering, services
UV-Absorption-Coating (pyrolytic)
AcuraCoat®
Product Details
glasstec.01.05.01
Stewart Engineers
Float glass technique
StewartFloat®
StewartFloat® furnace is engineered to produce Automotive, Architectural, Ultra-thin, Ultra-thick, Ultra-clear,
and/or Borosilicate glass products. This customized design package includes tonnage, thickness, ribbon width,
automation level, and sourcing selection.
AcuraCoat® high performance pyrolytic on-line glass
coating system consists of single flow, dual flow, and/or
lehr gap coaters capable of producing Reflective, Low E,
Solar Control, PV-TCO, Anti-Reflective, and Self Clean
hard coatings.
glasstec.01.11.02
IR-Reflective Coating (pyrolytic)
Other Products & Services
Our products and services are provided with a commitment to proven engineering practices combined with
professional integrity. Stewart Engineers specializes in
the supply of its proprietary float bath furnaces and OnLine Pyrolytic CVD Systems. In addition, Stewart Engineers has been extensively involved in, and assisted
others in the realization of their float glass plant components.
© 2010 Messe Düsseldorf GmbH
485
© 2010 Messe Düsseldorf GmbH
486
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.04.09.01
STG - Software & Technologie Glas GmbH
Address
+49 355 590200
Fax
+49 355 541124
Internet address
www.stg-cottbus.de
Combustion technology for oil and gas fired smelting
furnaces
STG´s energy saving and NOx decreasing Natural
Gas and Heavy
Kiekebuscher Weg 14
03050 Cottbus
Germany
Phone
STG - Software & Technologie Glas GmbH
As a part of the complex STG Energy Saving DeNOx
Technology developed a new generation of LowNOx
burners for heavy oil as well as for natural gas. They
are available both for crossfired and endfired furnaces
with regenerative preheated combustion air.
Talamoni s.n.c.
E-Mail
stg@stg-cottbus.de
Stand
Hall 15, C11 (Page 552)
Product Overview
Address
Via Menconi, 3
28877 Ornavasso / VB
Italy
Phone
+39 0323 836198
Fax
+39 0323 836900
Internet address
www.talamoni.com
E-Mail
info@talamoni.com
Stand
Hall 09, F37 (Page 532)
STG - Software & Technologie Glas GmbH
glasstec.01.04.09.01
Combustion technology for oil and gas fired smelting
furnaces
glasstec.01.04.10
NOx control technology
glasstec.05.01.02.02
Measurement, control and inspection of gas
compounds
glasstec.05.01.05
Control and automation technology
glasstec.05.03.04
Process control systems
© 2010 Messe Düsseldorf GmbH
487
© 2010 Messe Düsseldorf GmbH
488
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Company News
08/26/2010
Talamoni s.n.c.
type of glass working process. At Glasstec will be presenting the new synthethic
fluid T-OIL 9000 for e low glass cutting operation-
NEW TRIANGLE HOLDER WHEEL FOR BEIBUICK
MACHINES
IMPROVEDTOOL HOLDERS
TalamoniTR24BY tool holders.According to the company, based in northern Italy, TR24BY these tool holders, which are used onBiebuick machines, are now
made up of only three parts,and no longer of seven mechanical details.These three parts – two matching triangles and a single screw thus enable to save considerabletime in tool changeover since the triangular support can be easily opened
and closed in a singleoperation, also eliminating the loss of wheels and interchangeable.n
Tekimex International A.p.s.
Address
Baldersbuen 21
2640 Hedehusene
Denmark
Phone
+45 4656 0343
Fax
+45 4656 0523
Internet address
www.tekimex.com
ews
Product Overview
Talamoni s.n.c.
glasstec.01.02.03
Lubricators and coolants
E-Mail
info@tekimex.dk
glasstec.04.02
Cutting, grinding and drilling tools
Stand
Hall 10, D37 (Page 534)
glasstec.21.02
Special offers for glass trade / crafts
glasstec.21.03
Special offers for architects
Company News
Product Details
glasstec.01.02.03
08/30/2010
Talamoni s.n.c.
Lubricators and coolants
Lubrificants for automanic and manual cut
New One Man Lifter Saves Backs
Handling glass plates and windows can be a back
breaker due to the weight and dimension of the plates
and the uneven grounds of construction sites. The
methods to deliver plates haven’t changed in decades
even with windows now getting heavier and larger.
Quattrolifts has released the Express, an innovative
small portable lifter that allows one man to move plates
weighing up 80kg or two men up to 150kg. The Express is loaded onto a truck
in two 25kg parts and easily assembled in under a minute.
Talamoni will be presenting an oil formulated from our
technicians that permit to control the number of microfractures that occur in the different cutting phase. The
range of talamoni’s lubrificants includes 4 types of oil
with different characteristics: low, medium, normal,
high and super vaporability to choose in relation of the
© 2010 Messe Düsseldorf GmbH
Tekimex International A.p.s.
Once assembled the Express can unload plates off the truck and then transport the plates and windows on site. The large 330mm pneumatic wheels allow
489
© 2010 Messe Düsseldorf GmbH
490
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
for travelling over rough grounds on construction sites. The wheelbase can be
adjusted from 54 cm to 80cm allowing for narrow walkways on-site.
Company News
Two terrific features of the Express allow the lite or window to be rotated 360
degrees and secondly the operator can also index the lite allowing him to move
through standard 90cm wide doorways.
07/17/2010
Product Overview
It is well known that, during the forming process of multilayers glass, a cold air quenching process is used to
optimize the mechanical properties of the automotive
glass. A first important issue is to have a contact material that supports the high pressure forming process as
well as the weight of the glass itself without marking the still soft hot glass during the bending process. The second and most important issue is to allow an
even quenching process, even on the side of the glass that are supported by the
frame. The TIBTREMP family use a new concept of soft but resiliant stainless
steel braids of different thickness that are kept in position by a hybrid technology between woven and knitted process. These TIBTREMP quench tapes are
stretchable and can be adapted to several types of specific tooling.
Tekimex International A.p.s.
TIBTECH innovations
TIBTREMP:New Patented QUENCH Tape
TIBTECH has developped the ”TIBTREMP” Family, a
new concept of patented stainless steel tapes for automotive glass quenching process .
glasstec.01.09.01
Transport systems
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.06
Glass racks for transport and warehouse
glasstec.01.13.07
Vehicles for glass transport
glasstec.04.01.04
Turning aids and lifting tools for glass makers
glasstec.21.02
Special offers for glass trade / crafts
TIBTECH is a relatively new start up specialized in engineering and supply of
technical contact materials or gripping devices to the glass industry. We remain
at the service of your research or tooling centers or of your line process managers to studdy the best ways to optimize your process capability at the most
competitive global unit price.
196 rue du Pont Rompu
59200 Tourcoing
France
Product Overview
TIBTECH innovations
Address
Phone
TIBTECH innovations
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.02.04
Forming and bending technology
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
glasstec.03.03
Automotive glass
+33 320851073
Fax
Internet address
www.tibtech.com
E-Mail
contact@tibtech.com
Stand
Hall 13, E61 (Page 540)
© 2010 Messe Düsseldorf GmbH
491
© 2010 Messe Düsseldorf GmbH
492
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.06.17
covering
TIBTECH innovations
Aids for the forming of hollow glass
TNO
HEAT RESISTANT MOLDING MATERIAL
Heat resistant fabrics for glass transformation
The New MOLDTECH family : Stainless steel separation cloth for car glass industry: - High temperature
withstanding : can resist up to 700°C in furnace environment - exists in different structures and weight per m², to optimize technical
issues as run size or to optimize glass optical quality, even in case of small
radius.
MOLDTECH 5 : more than 1000Gr/m² stainless steel cloth for heavy lites with
the exclusive yarn structure for less marking risks.
MOLDTECH 4 around 900gr/m² for high quality work at very competitive price.
MOLDTECH 2 very soft and ligt cloth for high porosity need.
Address
De Rondom 1
5612 AP Eindhoven
Netherlands
Phone
+31 40 2650340
Fax
+31 40 2650850
Internet address
www.tno.nl/glass
E-Mail
roeland.brugman@tno.nl
Stand
Hall 15, E18 (Page 552)
”TIBTREMP” patended QUENCH TAPE please come and discover it !
Product Overview
SLEEVES For conveyor rollers protection
facilitate maintenance work with easy removing and change of roller covering.
spring effect on a thicker structure allowing better shock absorbtion in case of
glass dropping. adjustable to variable diameters
TIBSLEEVE : Technical Sleeves - available in pure stainless steel or blends with
PBO or Aramid,
ELASTISLEEVE: Very high permanent radial elasticity Sleeves: Their main interest is:
TIBTAPE: Narrow fabrics for ring frame protection : available in different
TIBFELT: Stainless steel felts for dampening devices or succion pads by exampe
TECHNICAL BRAIDS and NARROW FABRICS, high temperature seals gripping devices, specially in hollow glass applications spacers or conveyor rollers
© 2010 Messe Düsseldorf GmbH
493
glasstec.01.03.11
TNO
Batch calculation and glass property prediction
Product Details
glasstec.01.03.11
TNO
Batch calculation and glass property prediction
Glass
TNO’s Glass Group is the leading service provider worldwide to the international
glass industry. A combination of research, products and services has enabled
us to support the glass industry and its suppliers to innovate and improve glass
processes and products for more than 20 years.
Within the Glass Group, more than 40 scientific and industrial experts are working in projects for leading glass producing companies. Our experience and expertise range from raw materials to product certification. Specific areas of interest are optimisation and control of glass melting tanks, glass forming simulation,
chemical vapour deposition processes for coatings on glass and the evaluation,
testing and certification of products.
© 2010 Messe Düsseldorf GmbH
494
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Melting technology
Tokai Carbon Italia S.r.l.
For understanding high temperature glass processes and for developing new
glass applications, combined knowledge in the areas of physics, chemistry and
materials science is required. TNO’s Glass Group offers all this knowledge. Our
research is organized in bilateral projects and in consortium projects, sometimes
within the framework of European R&D programs.
Typical issues that are being dealt with by the Glass Group are:
Raw materials chemistry and melting kinetics Redox chemistry and fining for the
removal of bubbles from the glass melt Improvement of the mixing of glass to increase homogeneity Control of glass melt interaction with contacting materials,
such as refractories in the furnace and forming tools Evaporation processes, depletion of the glass melt, superstructure corrosion and particle emissions Combustion technology and burners
Specialized equipment is used to monitor e.g. batch melting, fining processes
or the interaction between glass and refractory, under different atmospheres,
different temperatures, different heating rates, and different compositions of the
glass, batch or materials involved. Sensors are used to characterize these experiments in detail, and analysis of all results gives important information on
options for optimization of different process steps, by adaptation of operating
conditions, batch composition and/or refractories.
Thermo-chemical modeling is used to support interpretation of the experimental
results obtained.
© 2010 Messe Düsseldorf GmbH
495
Address
Via Cagliari, 40
20060 Trezzano Rosa (Mi)
Italy
Phone
+39 02 90969190
Fax
+39 02 90968851
Internet address
www.tokaicarbon.co.jp
E-Mail
info@tokaicarbonitalia.it
Stand
Hall 11, D04 (Page 536)
Product Overview
Tokai Carbon Italia S.r.l.
glasstec.01.04.08
Electrically heated systems
glasstec.01.02.01
Refractory materials
glasstec.02.11.02
Replacement and spare parts
glasstec.01.06.13
Moulds for glass production
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
glasstec.01.06.17
Aids for the forming of hollow glass
© 2010 Messe Düsseldorf GmbH
496
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.04.08
Tokai Carbon Italia S.r.l.
glasstec.01.06.13
Moulds for glass production
Tokai Carbon Graphite
Electrically heated systems
Isotropic & Extruded Graphite for industrial application
TKK EREMA Heating Elements
glasstec.01.06.17
High-Grade SiC Heating Elements with a Wide Range
of Applications EREMA heating elements, composed
of high-purity silicon carbide, have earned a reputation as being the world’s leading heating elements.We
marketed the first prototype in Japan in 1927. EREMA
products are widely used as high-temperature heat sources for electric furnaces
for the firing of ceramic capacitors, ferrites and other electronic components
which are incorporated in televisions, radios and computers - performing essential functions - and for the dissolution and holding of optical glass and glass
plates. We are expanding the overseas sales of these heating elements through
the network of group companies.
Aids for the forming of hollow glass
TKK EREMA Heating Elements
SiC EREMA Heating Elements for high temperature application
Total Glass Lubricants Europe GmbH
Address
Zeithstr. 136
53819 Neunkirchen-Seelscheid
Germany
Phone
+49 2247 6608
Fax
+49 2247 74350
Internet address
www.kleenmold.com
INFRARED HEATERS : with outstanding durability and performance;
E-Mail
info@total-glass-lube.de
Winner : MoSi2 heating elements with a wide range of applications.
Stand
Hall 13, D32 (Page 540)
RECRYTE RS : SiC ceramic high-temperature material;
RECRYTE TN : SiN3 ceramic high temperature material;
Product Overview
glasstec.01.02.01
Total Glass Lubricants Europe GmbH
glasstec.01.02.03
Lubricators and coolants
glasstec.01.06.17
Aids for the forming of hollow glass
glasstec.01.12.02
Cold end coating
Refractory materials
TKK Refractory Materials
RECRYTE RS : SiC ceramic high-temperature material;
RECRYTE TN : SiN3 ceramic high temperature material;
© 2010 Messe Düsseldorf GmbH
497
© 2010 Messe Düsseldorf GmbH
498
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Total Glass Lubricants Europe GmbH
Product Overview
glasstec.01.02.03
Shear Spray Lubricants
TOTAL’s shear spray lubricants provide excellent lubrication, cooling, and corrosion protection. These features translate into reduced shear marks, prolonged
shear blade life and easy maintenance of the shear spray system.
Different operating and water quality parameters primarily dictate what type of
product will offer optimal lubrication. The primary components of a shear lubricant consist of a lubricating base oil and emulsifiers. Varying combinations of
these ingredients result in different characteristics.
TOTAL offers several types of shear oils. Each of these products was developed over the years with the same objectives, provide optimal lubrication while
reducing maintenance. Through cooperation with the worldwide glass industry
we have been able to test and refine these products to meet the demands of the
evolving industry.
UAS Messtechnik GmbH
Address
UAS Messtechnik GmbH
Lubricators and coolants
Prof.-Hermann-Staudinger-Str. 4
94234 Viechtach
Germany
glasstec.01.04.08
Electrically heated systems
glasstec.01.04.09.02
Combustion technology for oxygen heating systems
glasstec.01.08.01
Glass wool technology
glasstec.01.08.03
Textile glass fibre technology
glasstec.02.12.05
Waste water treatment
glasstec.05.01.01.01
Measurement and control of glass position detection
glasstec.05.01.01.05
Measurement and control of glass temperature
glasstec.05.01.01.08
Measurement and control of glass colour
glasstec.05.01.05
Control and automation technology
glasstec.05.02.01
MRP machine and transport adjustment
glasstec.05.03.04
Process control systems
Phone
+49 9942 9486-0
Fax
+49 9942 9486-10
Internet address
www.uas.de
Fiber glass
E-Mail
info@uas.de
The process has been modified and further developed in cooperation with leading fibre glass manufacturers to be able to increase production capacities continuously.
Stand
Hall 15, D14 (Page 552)
Product Details
glasstec.01.04.08
UAS Messtechnik GmbH
Electrically heated systems
UAS Messtechnik GmbH offers complete systems for the fibre glass industry that
cover the entire production field ranging from high-level process control technology to the MSR and control technology. The offer comprises technology and
equipment for:
* Batch house * Glass melting furnace * Pre-channel, intermediate channel and
© 2010 Messe Düsseldorf GmbH
499
© 2010 Messe Düsseldorf GmbH
500
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
feeder * Spinning units * Bushings * Winders * Cut glass systems * Recycling
systems * Final product processing plants * Two-stage melting systems * Sizer
preparation plants
Balancing the O2 content in the combustion air over the entire
production phase
Tested for TA air compatibility.
Fiber glass
The process has been modified and further developed in cooperation with leading fibre glass manufacturers to be able to increase production capacities continuously.
UAS Messtechnik GmbH offers complete systems for the fibre glass industry that
cover the entire production field ranging from high-level process control technology to the MSR and control technology. The offer comprises technology and
equipment for:
* Batch house * Glass melting furnace * Pre-channel, intermediate channel and
feeder * Spinning units * Bushings * Winders * Cut glass systems * Recycling
systems * Final product processing plants * Two-stage melting systems * Sizer
preparation plants
The excess air factor was reduced considerably by using the new UAS technology, which in turn resulted in remarkable energy saving. Daily manual corrections, which are required even with the latest MSR technology, in the ratio
control for optimising the operation are omitted.
NOx pollutant values are stabilised in the lower range; exhaust gas values are
stabilised and smoothened collectively.
Since there are no large temperature fluctuations in the top furnace, a uniform
controlling method is achieved.
Overheating of chambers has not been detected after installing this system.
This system is suitable for U-flame furnaces as well as cross-frame furnaces.
Fiber glass
Remote diagnosis (modem) provides an option of optimising the burner and localising the error while analysing the exhaust gas from outside.
The process has been modified and further developed
in cooperation with leading fibre glass manufacturers to
be able to increase production capacities continuously.
UAS Messtechnik GmbH offers complete systems for
the fibre glass industry that cover the entire production field ranging from highlevel process control technology to the MSR and control technology. The offer
comprises technology and equipment for:
* Batch house * Glass melting furnace * Pre-channel, intermediate channel and
feeder * Spinning units * Bushings * Winders * Cut glass systems * Recycling
systems * Final product processing plants * Two-stage melting systems * Sizer
preparation plants
glasstec.01.04.09.02
By taking the CO content into account, UAS Messtechnik GmbH has successfully developed and used a system for primary NOx reduction.
Combustion technology for oxygen heating systems
Low Nox Technology
The first NOx regulation by taking the CO value into account
With this system, UAS has achieved significant reduction in interference effects in the field of fed combustion energy. It can also be used for reducing
the flammability and flame combustion in the glass melting furnace.
glasstec.01.08.01
Glass wool technology
Fiber glass
The process has been modified and further developed
in cooperation with leading fibre glass manufacturers to
be able to increase production capacities continuously.
UAS Messtechnik GmbH offers complete systems for
the fibre glass industry that cover the entire production
field ranging from high-level process control technology to the MSR and control
technology. The offer comprises technology and equipment for:
* Batch house * Glass melting furnace * Pre-channel, intermediate channel and
feeder * Spinning units * Bushings * Winders * Cut glass systems * Recycling
systems * Final product processing plants * Two-stage melting systems * Sizer
preparation plants
NOx reduction by 10 to 18 %
Stable controlling method of the glass furnace
Smoothening of CO peaks
No overheating of chambers
Energy saving
© 2010 Messe Düsseldorf GmbH
501
© 2010 Messe Düsseldorf GmbH
502
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.08.03
Textile glass fibre technology
Company News
Fiber glass
06/10/2010
The process has been modified and further developed in cooperation with leading fibre glass manufacturers to be able to increase production capacities continuously.
UAS Messtechnik GmbH offers complete systems for the fibre glass industry that
cover the entire production field ranging from high-level process control technology to the MSR and control technology. The offer comprises technology and
equipment for:
* Batch house * Glass melting furnace * Pre-channel, intermediate channel and
feeder * Spinning units * Bushings * Winders * Cut glass systems * Recycling
systems * Final product processing plants * Two-stage melting systems * Sizer
preparation plants
Vesuvius France SA
VESUVIUS SMARTLY DRIVEN® Tempering Rollers
Vesuvius reinforced its position as the world’s leading innovative supplier of Fused Silica Glass Tempering Rolls with the launch of the patented SMARTLY
DRIVEN® all mechanical end cap attachment system.
This unique end cap attachment development uniquely
applies an environmentally and ergonomically friendly end cap system eliminating the need for a resin bond requiring chemicals such as formaldehyde.
The SMARTLY DRIVEN® End Cap is a superior product capable of withstanding
arduous temperatures and torque operating condition. The maximum operating
temperature has increased to 350° C compared to 150° C with the resin bonded
design.
Vesuvius manufacturers and designs advanced Fused Silica products for the
Solar, Glass Fabricating, Glass Forming and Foundry Industries
Vesuvius France SA
For more information about Vesuvius go to www.vesuvius.com
Address
68 Rue Paul Deudon
59750 Feignies
France
Phone
+33-327-6910-10
Fax
+33-327-6914-11
Internet address
www.vesuvius.com
E-Mail
info@vesuvius.com
Stand
Hall 13, C81 (Page 540)
© 2010 Messe Düsseldorf GmbH
Product Overview
503
Vesuvius France SA
glasstec.01.02.01
Refractory materials
glasstec.01.04.02
Forehearth technology
glasstec.01.05.01
Float glass technique
glasstec.01.05.03
Casting and rolling technology
glasstec.01.06.01
Gob feeder
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
glasstec.02.04
Forming and bending technology
© 2010 Messe Düsseldorf GmbH
504
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.02.07.02
Components and accessories for display glass
technology
glasstec.01.05.01
glasstec.02.11.02
Replacement and spare parts
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
glasstec.03.01.01
Float and mirror glass
glasstec.03.02.01
Tempered glass
glasstec.03.02.13
solar glass
Float glass technique
Zyarock® Tweel and Flat Arch
glasstec.01.05.03
Casting and rolling technology
SMARTLY DRIVEN® Tempering Rollers
glasstec.01.06.01
glasstec.03.04.01.01.02Thin film PV panels
Gob feeder
Zyarock® Feeder Accessories
glasstec.03.04.02.02
Solar mirrors
Product Details
glasstec.01.02.01
Vesuvius France SA
Refractory materials
Zyafoam®
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
Zyarock® Lehr and Lift-out Rollers
glasstec.01.04.02
Forehearth technology
Zyarock® Shadow Walls
© 2010 Messe Düsseldorf GmbH
505
© 2010 Messe Düsseldorf GmbH
506
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
Vidromecanica
glasstec.01.09.02
Address
Rua Central, 22 - Garcia
2431-905 Marinha Grande
Portugal
Phone
+351 244 555060
Fax
+351 244 552410
Internet address
www.vidromecanica.com
E-Mail
vidromecanica@vidromecanica.com
Stand
Hall 14, D13 (Page 548)
Vidromecanica
Stacker systems
STACKER WITH 3 AXLES, (X,Y,Z), MODEL VSTC 04
Mechanical working, backed up by electronic servo
drives, that allow smooth motions with speed variation.
Smooth forward, side and upward displacement motions, independent upon 3 axles (X,Y,Z), made by servo
motors.
Displacement is made through a sphere shaft with sliding upon guides with
skate-type bearings.
Forward displacement: up to 500mm.
Product Overview
Vidromecanica
Side displacement: up to 550mm.
glasstec.01.03.06
Cullet preparation
Upward displacement: up to 500mm.
glasstec.01.03.07
Refuse collection and glass recycling
Push-bar width: up to 5500mm.
glasstec.01.09.02
Stacker systems
Installed power: 9.5 kW, 380 V ... 500 VAC, 50-60 Hz.
glasstec.01.09.03
Annealing lehrs, continuous/intermittent operation
Electric panel with programming operator panel and PLC to define the cam adjustment
glasstec.01.09.04
Decorating lehrs
glasstec.01.09.05
Pre-heating furnaces
glasstec.01.12.01
Hot end coating
glasstec.01.12.01
Hot end coating
HOT- END COATING SYSTEM, VERSION 2001
MODELS NO. VTSQ 12/13/14
glasstec.01.12.02
Cold end coating
© 2010 Messe Düsseldorf GmbH
It provides the glass container hot-end coating treatment, leaving a thin coating of tin oxide, on the surface
of the containers, thus increasing the surface strength
and abrasion resistance.
507
© 2010 Messe Düsseldorf GmbH
508
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.01.12.02
Features:
· 2 Side chambers with 2 recirculation motors each, which create inside 2 loops
for the product flow around the glass containers.
· 1 Recovering fan placed at the tunnel exit, allows to profit the exceeding product.
· 1 Adjustable height mid-section with purge air to give finish protection.
Cold end coating
UNDER BELT GLASS CONTAINER COLD END COATING
This equipment provides cold end spray coating of
glass containers with dilute polyethylene wax emulsions, from under the lehr belt, to provide a surface layer to allow easy handling of the glass articles.This method of spraying may be used with overhead
spraying to provide additional continuous coating for bottles or when used alone
avoids entry of the spray mixture into the jar or bottle.
Features:
· 1 Product vaporizer.
· Bridge under the lehr conveyor belt equipped with sliding guides for spray gun
trolley.
· 1 Product dosing system.
· Spray gun trolley with vertically set up spray guns.
· 1 Fume extraction.
· Pneumatic set up for spray guns.
· Forced cooling for high production rates.
· Control panel with traverse speed adjustment by frequency converter.
· Internal heating for low production rates and production start.
· Installed power: 0.25 kW at 380-415/440-480 V, 50/60 Hz.
Installed power:
- Motors 3.0 kW, 220/380/480V, 50/60Hz
- Heating elements: 9.6kW
Dimensions of mid-section:
- Width (W) - 160/180/200/220 mm.
- Height (H) - 360 mm.
- Length (L) - 1250/1750/2250 mm
© 2010 Messe Düsseldorf GmbH
509
© 2010 Messe Düsseldorf GmbH
510
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
glasstec.05.01.02.01
Surface, contour and imperfection measurement and
control
glasstec.05.01.04
Detectors for laminated glass
glasstec.05.03.02
Inspection, protocolling and diagnostic systems
Viprotron GmbH
Address
Lise-Meitner-Str. 10
64293 Darmstadt
Germany
Phone
+49 6151 80021-30
Fax
+49 6151 80021-31
Internet address
www.viprotron.de
E-Mail
info@viprotron.de
Stand
Hall 14, C40 (Page 548)
Product Details
glasstec.01.10.03
Viprotron GmbH
Inspection systems
Quality Scanner
Quality Scanner
Quality Inspector
Quality Checker IGU
Company News
Viprotron GmbH
Quality-Scanner-IG
09/07/2010
New Products during the Glasstec
Quality Checker IGU
Reliable Quality Control on assembled IG Units
Product Overview
Viprotron GmbH
glasstec.01.10.03
Inspection systems
glasstec.02.08.01
Complete plant for insulating glass production
glasstec.02.09.01.01
Furnaces for thermal pre-tempering of glass
glasstec.02.09.02.01
Laminated glass technology with foil for architectural
glass
© 2010 Messe Düsseldorf GmbH
511
In modern production process of insulated glass a reliable visual inspection is indispensable to avoid cost intensive customer
complaints. Present-day it is standard to trust nearly exclusive
in manual inspection. But such human controls are not only extremely expensive, but also only restrictively consistent. At the
same time the expectations increases to rely 100% on the quality. State of the art vision systems are today able to automate
such tasks with convincing results and also displace human inspectors for other assignments.
With the Quality-Scanner-IG is now a low cost quality control system available
equipped with this innovative technology. Together with the newest generation
of intelligent CCD-cameras and an intuitive Windows based user interface, the
Quality-Scanner-IG takes charge of a reliable In-Line quality control. Directly
integrated into the production process of insulated glass, this high performance
system allows to guarantee your customer a consistent and reproducible quality of the glass independent of human motivation and abilities. Simultaneously a
detailed documentation and archiving of the quality is achieved which allows you
to prove the exact inspection details of a specific glass unit after even several
months. Furthermore the Quality-Scanner-IG offers enough potential to optimise your productivity which automatically conducts to a preventive avoidance
© 2010 Messe Düsseldorf GmbH
512
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
of glass defects.
All visual defects like e.g. bubbles, scratches, stones, coating defects, tin, dirt,
finger prints, foil defects, etc. larger than 0,5 mm² will be easily detected by the
Quality-Scanner-IG. The user friendly Windows interface allows you to define
and illustrate the exact quality settings according to the specific requirements of
your customer.
The Quality-Scanner-IG which is completely integrated in the production line after the washing machine, stops rejectable glass or gives a warning signal before
the glass will be further assembled. On the screen the rejected glass will be visualized in details by displaying the precise calculated defect positions within
the defined quality zones. With such a detailed visualisation your employee will
easily be able to immediately locate the defects on the glass. By integrating
the Quality-Scanner-IG in your production line you not only gain a high performance tool for improved quality and productivity but also customer satisfaction
and confidence.
Business Park Schwanenmühle
66851 Schwanenmühle
Germany
Phone
+49 6307 91255-0
Fax
+49 6307 91255-27
Internet address
www.vision-electric.de
E-Mail
info@vision-electric.de
Stand
Hall 13, C65 (Page 540)
© 2010 Messe Düsseldorf GmbH
Vision Electric GmbH
glasstec.01.04.03
Smelting technology for tank furnaces
glasstec.01.04.08
Electrically heated systems
glasstec.03.04.01.02
PV system components
Product Details
glasstec.01.04.08
Vision Electric GmbH
Electrically heated systems
Vision®Bar
Vision®Bar is the type-tested standard busbar system fulfilling the requirements
of IEC 439 - EN 60439 - DIN/VDE 0660 - EN NF 60439.
Advantage of Vision®Bar: The combination of rigid and flexible parts is a technical advantage, which reduces the total installation time of a busbar connection.
Our customers value other product features as important advantages like enclosure made of aluminum instead of steel, the mounting rail along the four edges
and the possibility to change the protection degree within one busduct run.
Vision Electric GmbH
Address
Product Overview
Vision®Bar combines good technical values along with excellent cost effectiveness. Vision®Bar is available with copper or aluminum conductors in ranges
from 1200 A up to 9000 A nominal current. IP31, IP42, IP54 and IP55 are the
standard protection degrees of the aluminum enclosure. Vision®Bar is designed
for a nominal voltage of 1 kV.
513
© 2010 Messe Düsseldorf GmbH
514
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
VMA Gesellschaft für visuelle Meßtechnik und
Automatisierung mbH
Product Details
glasstec.01.02.04
VMA Gesellschaft für visuelle Meßtechnik und...
Laboratory equipment
Address
Gewerbegebiet (OT Wümbach)
98704 Wolfsberg
Germany
Phone
+49 36785 587-0
Fax
+49 36785 51225
Using a spacer, which can be mounted on the sensor
head in a simple manner, the items to measured can be
placed easily in front of the sensor head.
Internet address
www.vma-online.de
That way, the wall thickness can be measured manually. It is indicated digitally
on the display of the electronic unit.
E-Mail
vma-gmbh@t-online.de
The spacer is made of plastics material and does not damage the items to be
measured.
Stand
Hall 12, D17 (Page 538)
glasstec.01.10.01
TM(C) System for measurement and valuation of
glass distribu
Laboratory instrument
Optimization of glass cutting and glass production yield
TC - Tube Control
Product Overview
VMA Gesellschaft für visuelle Meßtechnik und...
glasstec.01.02.04
Laboratory equipment
glasstec.01.05.01
Float glass technique
glasstec.01.05.03
Casting and rolling technology
glasstec.01.10.01
Optimization of glass cutting and glass production yield
glasstec.05.01.01.04
Measurement and control of glass thickness
glasstec.05.01.01.05
Measurement and control of glass temperature
glasstec.05.01.01.07
Measurement and control of glass tension
glasstec.05.01.05
Control and automation technology
glasstec.05.03.04
Process control systems
© 2010 Messe Düsseldorf GmbH
515
TC - Tube Control is a modular sytem which is used for numerous applications
in tube production and tube processing. Choice and connections of the modules
are done in accordance with the different needs of the customers.
© 2010 Messe Düsseldorf GmbH
516
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
W. Haldenwanger Technische Keramik GmbH &
Co. KG
Address
Teplitzer Str. 27
84478 Waldkraiburg
Germany
Phone
+49 8638 6004-0
Fax
+49 8638 6004-317
Internet address
www.haldenwanger.de
E-Mail
info@haldenwanger.de
Stand
Hall 12, A05 (Page 538)
Product Overview
W. Haldenwanger Technische Keramik GmbH & Co. KG
glasstec.01.02.04
Laboratory equipment
glasstec.01.09.01
Transport systems
glasstec.05.01.01.05
Measurement and control of glass temperature
Product Details
glasstec.01.02.04
WITT-GASETECHNIK GmbH & Co KG
W. Haldenwanger Technische Keramik GmbH & Co. KG
Laboratory equipment
Address
Salinger Feld 4-8
58454 Witten
Germany
Phone
+49 2302 8901-0
Fax
+49 2302 89013
Internet address
www.wittgas.com
E-Mail
witt@wittgas.com
Stand
Hall 12, B27 (Page 538)
Product Overview
glasstec.01.02.02
Industrial gases
glasstec.01.04.05
Gas equipment and supply systems
glasstec.01.04.09.02
Combustion technology for oxygen heating systems
glasstec.02.08.05
Gas filling machines and gas devices
glasstec.02.13.01
Components and accessories (suppliers to the glass
machinery industry)
glasstec.05.01.02.02
Measurement, control and inspection of gas
compounds
glasstec.05.01.05
Control and automation technology
Pestles
A wide range of standard pestles are available for purchase online. Select head size from 24mm to 85mm diameter and specify glazed or unglazed.
© 2010 Messe Düsseldorf GmbH
517
WITT-GASETECHNIK GmbH & Co KG
© 2010 Messe Düsseldorf GmbH
518
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Details
glasstec.01.04.05
WITT-GASETECHNIK GmbH & Co KG
Zecchetti S.r.l.
Gas equipment and supply systems
Address
Via Galileo Galilei, 1/1a
42027 Montecchio Emilia (Re)
Italy
Technical and optical glass products are high-precision
products, which can only be produced using high performance technology.
Phone
+39 0522 867411
Fax
+39 0522 866034
State of the art gas regulation systems by WITT for an
accurate fuel gas/oxygen mixture provide the necessary
precision and a constant burner supply.
Internet address
www.zecchetti.it
E-Mail
info@zecchetti.it
Whether you are using premixed gases or a gas mixer – you can choose between various gases for the burner supply: Propane, natural gas, hydrogen and
acetylene can be mixed with oxygen or ambient air. The production of three or multi gas mixtures is also possible. Using the MFC technology (MFC = Mass
Flow Controller) an accurate gas mixture and an exact metering is ensured. Together with this features the system provides digital measurement data for the
permanent quality control using an integrated analysing system.
Stand
Hall 13, E77 (Page 540)
Gas mixers (Gas blenders) and gas metering systems
Glass and thermal processing using WITT gas mixers
The fully electronic control optimises the mass flow of the fuel gases, balances
out interferences such as pressure fluctuations or temperature influence and
provides constant values for the entire production process, thus avoiding a high
reject rate.
The storage and easy reproducibility of product-related flow-rates provide a minimal start-up time when changing the product line. The accurate logging of the
flow rates of the gases provide an effective quality and cost control.
Company News
06/18/2010
Zecchetti S.r.l.
PRECISION AND RELIABILITY
Precision and Reliablity are vital to handle particularly
delicate products needing to be gently moved and conveyed by avoiding accumulation situations.
Zecchetti range of equipment includes Stacker units
operating in several modes : - Pick-and-place - High
precision pick-and-place wth: - Step by step ndexing
of the table - Distancing of bottles before depositing them on the table
The best solutions when having to move valuable or decorated bottles or even
unstable bottles.
The MFC-systems by WITT combine all components which are necessary for
quality control such as non-return valves, gas filter and solenoid valves which
are already integrated. Also equipped with flashback arrestors, this solution
represents the highest levels of safety.
© 2010 Messe Düsseldorf GmbH
519
© 2010 Messe Düsseldorf GmbH
520
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
06/18/2010
PAL 300 MPH - MULTI PURPOSE PALLETIZER
Product Overview
Tradition & Innovation means for Zecchetti: Reliability
& Flexibility
The Zecchetti traditional Rotary Column PAL 300 equips
itself to become multi-function. - A unique Palletizer
to match with all the palletizing needs - No need to
choose between a pickup system and a sweep-off one
- The Zecchetti traditional PAL 300 guarantees future
flexibility and productivity - The PAL 300 MPH keeps all the features which determined the success of the Zecchetti Rotary Column Palletizer.
06/18/2010
FLEXIBILITY IN HANDLING MULTIPLE TYPES OF
CONTAINERS AT THE SAME TIME
- FLEXIBILITY Extremely Flexible Cold End lines for the handling of
innumerable containers with different and very special
shapes. The handled containers are even produced at
the same time (mix of products, up to 6 different containers).
glasstec.01.13.01
Feeding and stacking systems
glasstec.01.13.02
Transport and handling systems
glasstec.01.13.03
Conveying, sorting and storage facilities
glasstec.01.13.04
Packing lines - boxes, shrinking, hoop-casing
machinery
glasstec.01.13.05
Warehouse technology
glasstec.01.13.09
Parts for conveying, transport, packing and warehouse
technology
Product Details
glasstec.01.13.01
The lines are provided with all the technical solutions
that allow to safely and precisely convey even the most
particular and difficult bottle.
Zecchetti S.r.l.
Feeding and stacking systems
Stacker Units & Palletizers
Some of those technical solutions can be seen in operation at the Zecchetti
Booth # 13 E 77 during the Glasstec Exhibition.
06/18/2010
Zecchetti S.r.l.
HIGH SPEED COLD END LINES MATCHING WITH THE
BIG REQUIREMENTS OF HIGH PRODUCTION GLASS
FACTORIES
Zecchetti range of equipment includes Stacker Units
operating in several modes:
- Pick-and-place
- High precision pick-and-place with step-by-step indexing of the table and distancing of bottles before depositing them on the table
- HIGH SPEED –
Zecchetti Cold End Lines and Palletisers are state-ofthe-art equipment incorporating all the “high-tech” solutions allowing to run at considerably high speeds, guaranteeing however the product safety.
- Sweep-off mode.
Six-lane infeed Stacker Units and Palletizers provided
with axis control on all the main movements, together with redundant components, assure comfortable operations and peak performances.
At the same way, Zecchetti can propose various degrees of automation in the
Palletizing , from the semi-automatic one to the fully automatic, full optional version.
In particular, our MULTI PURPOSE PALLETIZER ”MPH” equipped with the NEW
© 2010 Messe Düsseldorf GmbH
521
© 2010 Messe Düsseldorf GmbH
522
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
PATENTED MULTI PURPOSE HEAD is able to palletize any kind of container.
ZIPPE Industrieanlagen GmbH
Address
Alfred-Zippe-Str.
97877 Wertheim
Germany
One unique type of side frame
Phone
+49 9342 804-0
particularly strong, enables the construction of both single and multiple lane linear sections of conveyors as
well as single and/or multiple lane bends, side-to-side
connections, single filers, free flow tables and so on.
Fax
+49 9342 804-138
Internet address
www.zippe.de
E-Mail
zippe@zippe.de
Stand
Hall 13, A31 (Page 540)
glasstec.01.13.02
Transport and handling systems
Cold end conveyors
All components such as the side guide supports are mounted by using the side
frame grooves thus avoiding, for instance, drilling operations during the installation phase with an evident time saving. The same applies to the possible
accessories such as photo-eyes, detectors and so on. In this last case the big
advantage comes from the fact that the fitting of all the accessories can take
place once the line has been completely installed.
Company News
The frame can house all types of chains and belts that are available in the market
.
Wear strips for carrying way can be in any type of material such as polished
steel, nylon, and oil-impregnated wood.
The same applies to the wear strips for return way that can be made with plastic
rollers or plastic straight sections or plastic serpentine.
The core of the side and central guides is in extruded aluminium too with grooves
in order to easily fit the supporting legs. The legs are also modular so that these
two features allow cullet conveyors to be installed wherever is better. The same
structure of the supporting legs can be used for the installation of the cable trunking.
© 2010 Messe Düsseldorf GmbH
523
08/30/2010
ZIPPE Industrieanlagen GmbH
Further development of Batch Preheating Technology
by Zippe
The company Zippe installed the first batch preheater for the glass industry
already in 1984. After other installations followed, Zippe became a pioneer in
that technology. Due to increasing energy prices, the demand for this technology, that provides significant energy savings, increased strongly in recent years.
Already in 2006, Zippe initiated a research and development project (partially
supported by the German government) to improve the existing technology. The
aims were the application also with lower cullet content, maximum safety in operation, and high potential energy savings. After an intensive and long-term
pilot project, the 2nd generation of batch preheaters, the ABP (Advanced Batch
Preheater) was created and its applicability proven. By such, Zippe addresses
future demands of the industry and contributes to a sustainable energy-efficient
glass production.
© 2010 Messe Düsseldorf GmbH
524
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Product Overview
glasstec.05.01.01.01
Measurement and control of glass position detection
glasstec.05.01.05
Control and automation technology
glasstec.05.02.01
MRP machine and transport adjustment
glasstec.05.03.04
Process control systems
glasstec.06
Contracting, consulting, engineering, services
glasstec.07.02
Specialised Publishers
glasstec.07.03
Trade associations/Organisations
ZIPPE Industrieanlagen GmbH
glasstec.01.03.01
Crashing and grading
glasstec.01.03.02
Drying technology
glasstec.01.03.03
Metering and weighing technology
glasstec.01.03.04
Mixing technology
glasstec.01.03.06
Cullet preparation
glasstec.01.03.07
Refuse collection and glass recycling
glasstec.01.03.08
Raw material technology and prewarming cullet
technology
glasstec.01.03.09
Colour sorting (cullet)
glasstec.01.03.11
Batch calculation and glass property prediction
glasstec.01.04.01
Batch charging technology
glasstec.01.04.12
Processing of water cooling for cullet treatment
glasstec.01.10.02
Cullet transportation
glasstec.01.13.02
Transport and handling systems
glasstec.02.01.04.01
Mechanical snapping devices
glasstec.02.12.01
Treatment of used glass
glasstec.02.12.05
Waste water treatment
© 2010 Messe Düsseldorf GmbH
Product Details
glasstec.01.03.01
ZIPPE Industrieanlagen GmbH
Crashing and grading
Glass Crushers
The ZIPPE crushers are individually designed for the
crushing of all kinds of glass. Their performance has
been proven in the glass industry for decades. The
crushing granulometry of the BRV type crusher is adjustable. The exchange of hammers as well as the impact wall is uncomplicated, the energy requirements are low and due to the small
vibrating power this crusher does not need any foundation.
For special types of glass different executions in design, e. g. different impact
bars and the installation of gratings, were developed. Therefore, the final crushing of laminated and wired as well as textile glass and glass wool is also possible.
ZIPPE float glass crushers are designed as inline crushers provided to crush
the occurring waste glass. This waste can be in the form of faulty plates as well
as cut off glass trimmings (edges) and must be handled and disposed without
disturbing the continuous glass flow. The pre-broken float glass passes a final
crusher (for example ZIPPE hammer crusher type BRV 101) due to further treatment to required final grain size . The plate and edge breaker will be designed
in correspondence to the occurring waste glass dimensions. They stand for low
wear and maintenance operation.
525
© 2010 Messe Düsseldorf GmbH
526
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
www.glasstec.de / www.solarpeq.de
Batch Chargers
tional leading roll as well. Checked within the scope of internal test runs and
developed in co-operation with you, our customers, they fulfil the demands of all
furnace types.
On the special field of batch chargers ZIPPE plays
an international leading roll as well. Checked within
the scope of internal test runs and developed in cooperation with you, our customers, they fulfil the demands of all furnace types.
E Standard Batch Charger Type E The standard batch charger type E excels
by its particularly rugged, matured design and simple maintenance. Melting furnaces having a great doghouse width, e.g. flat glass tanks, can be equipped
with several batch chargers are arranged in parallel. Owing to a specific electric
control system these machines can be individually operated.
glasstec.01.03.03
Metering and weighing technology
Batch Charger Type ECD Using the ECD batch charger enables the transport
of batch into the doghouse without material filling height. So, unwanted dust
development can be avoided. The swivelling of the pusher enables a specific
direction control of the material flow and consequently an optimal covering of
the melting surface is possible. Due to a special design the sealed doghouse
guarantees no energy losses which results in an increase of the furnace capacity.
glasstec.01.03.06
Cullet preparation
Modular Fibre Glass Recycling
A modular ZIPPE developed plant technique ensures
that fiber glass waste occurring during production process is grinded to the required final grain size and
extracted from organic binding materials respectively
binders.
Consequently, this cleaned glass waste can be used for
remelting.
glasstec.01.03.11
Batch calculation and glass property prediction
Batch Charger Type ECD
Using the ECD batch charger enables the transport of
batch into the doghouse without material filling height.
So, unwanted dust development can be avoided. The
swivelling of the pusher enables a specific direction
control of the material flow and consequently an optimal covering of the melting
surface is possible. Due to a special design the sealed doghouse guarantees
no energy losses which results in an increase of the furnace capacity.
glasstec.01.04.01
Batch charging technology
E Standard Batch Charger Type E
Batch Chargers On the special field of batch chargers ZIPPE plays an interna-
© 2010 Messe Düsseldorf GmbH
527
© 2010 Messe Düsseldorf GmbH
528
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
glasstec
Autoglass Arena
FassadenCenter
Hallen/Halls
9–17
Hallen/Halls
9–11
Glasprodukte und Glasanwendungen
Glass products and applications
Hallen/Halls 11–12, 14–17
Glasbearbeitung und-veredelung
Glass processing and snapping technology
Halle/Hall
12
Messtechnik, Steuertechnik,
Regeltechnik, Software
Measurement, testing,
control technology and software
Hallen/Halls
13–16
Glasherstellung, Produktionstechnik
Glass production, production technology
Halle/Hall
14
s larpeq
››
Zusätzliche Aussteller
mit solarpeq Angeboten
in den glasstec-Hallen
In these halls exhibitors
of glasstec with additional
solarpeq products are located
Stand: März 2010 / As of: March 2010
Änderungen vorbehalten / Subject to change.
© 2010 Messe Düsseldorf GmbH
530
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
2.1 Hall 09
D25
ROHDE GmbH
D37
Nabertherm GmbH
E30
Kurt Merker GmbH
F37
Talamoni s.n.c.
© 2010 Messe Düsseldorf GmbH
532
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
2.2 Hall 10
A21
MOTIM Fused Cast Refractories
Ltd.
A28
Refmon Zrt.
A82-32
Luoyang Dayang Refractory Co.,
Ltd.
B04-2
Changshu Jianhua Die Sets Co.,
Ltd.
B80-19
Changshu Weiheng Mould
Manufacture Co., Ltd.
C20-4
Changshu Shinan Mould Co., Ltd
D34
Dornbusch Gravuren GmbH
D37
Tekimex International A.p.s.
F42
JUTEC® Hitzeschutz GmbH
H30
Lansing Unitra GmbH
© 2010 Messe Düsseldorf GmbH
534
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
2.3 Hall 11
B26
Grenzebach Maschinenbau GmbH
C03
LT GASETECHNIK GmbH & Co.
KG
D04
Tokai Carbon Italia S.r.l.
D69
Ferro Corporation, Glass Systems
Division
D76
BROTHER GLASS MOULD Co.,
Ltd.
E40
AEG Power Solutions GmbH
F09
Putsch Meniconi S.p.A.
© 2010 Messe Düsseldorf GmbH
536
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
2.4 Hall 12
A05
W. Haldenwanger Technische
Keramik GmbH & Co. KG
A48
Barbaric GmbH
B21
Bohemia Machine s.r.o.
B27
WITT-GASETECHNIK GmbH & Co
KG
B29
Bekintex N.V.
C35
Pneumofore S.p.A.
C48
Gedevelop AB
C65
AYROX SCRL
D17
VMA Gesellschaft für visuelle
Meßtechnik und Automatisierung
mbH
D30
Hydrogenics Europe NV
D31
Avaluxe International GmbH
E32
Cugher Glass S.r.l.
F18
MSC & SGCC
F25
Inspection Systems
F60
PEMCO International, c/o PEMCO
Emails S.r.l.
© 2010 Messe Düsseldorf GmbH
538
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
2.5 Hall 13
A05
Commersald Impianti S.r.l.
A11
Fonderie Bartalesi S.r.l.
A12
GPS Glasproduktions-Service
GmbH
A13
Cimec Oy
A16
Omco International N.V.
A24
INTERGLASS
A31
ZIPPE Industrieanlagen GmbH
A33
AEROGAS GmbH
A43
DMA Maschinen- und Anlagenbau
GmbH & Co. KG
A44
New Hudson Corporation
A48
CNUD-EFCO INTERNATIONAL
SA/NV
A55
KTG Engineering Ltd.
A61
KANTHAL, Sandvik Heating
Technology AB
A65
EMMETI
A69
C.RE.F.IN. S.r.l.
© 2010 Messe Düsseldorf GmbH
540
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
Hall 13, Continuation 1
A72
Saint-Gobain SEFPRO
A73
Glass Technologies S.r.l.
A77
Merkle International, Inc.
A80
Hotwork International AG
A81
Eclipse, Inc.
A83
Electroglass Ltd.
A85
Air Products
A87
Area Impianti S.p.A.
A88
Fickert & Winterling, Maschinenbau
GmbH
B21
SCHRADER Glasformenbau
GmbH & Co. KG
C05
Bottero S.p.A., Hollow Glass
B31
MSK Verpackungs-Systeme GmbH
C06
Modell- und Formenbau Ekkehart
Krahl
B33
IWG Ingenieurbüro Wagenbauer
Glasofenbau GmbH
C08
Romeca
B34
RUREX-STAHL, Dr. Otto Kukla
GmbH
C12
EUROMATIC S.r.l.
C14
Maquinas Argentinas del Vidrio
S.A. (MAVSA)
B38
SPECIAL CERAMICS Pvt. Ltd.
B61-1
E.W. Bowman, Inc.
C16
SMT Lager- und Transportsysteme
GmbH
B77
Sklostroj Turnov CZ, s.r.o.
C24
Rath AG
B78
Glashüttentechnik-Glasofenbau
C31
ilis gmbh
A93
Langendorf GmbH
B80
DSF Refractories & Minerals Ltd.
C43
Emhart Glass S.A.
A94
AGC Ceramics Co., Ltd.
B81
Advantech S.p.A.
C48-2
Stewart Engineers
B05
FONDERIE VALDELSANE S.p.A.
B82
PT. Dyson Zedmark Indonesia
C49-2
B13
JCL Engineering Pte Ltd
B86
BERNARD & BONNEFOND
North American Refractories
Company
B19A
Ori-Mould Technology Co., Ltd., Su
Zhou
B88
Franke Industrieofen-Service
GmbH
C49-5
RoMan Manufacturing, Inc.
C65
Vision Electric GmbH
B19B
ASCO Numatics GmbH
B90
Körting Hannover AG, Bereich W,
Industrie- u. Prozesswärme,
Feuerungstechnik
C66
P-D Refractories GmbH
C69
Plansee Metall GmbH
B91
RHI Glas GmbH
© 2010 Messe Düsseldorf GmbH
542
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
Hall 13, Continuation 2
C73
Fives Stein Ltd.
C81
Vesuvius France SA
D62
MERSEN France Gennevilliers
S.A.S.
E31
Alfaref GmbH
D63
F.O.R.T.E. Srl
E40
SCHUPP Industriekeramik GmbH
& Co. KG
D65
De Raedt Industrial Fans
E41
Sheppee International Ltd
D66
Ruitai Materials Technology Co.,
Ltd.
E46
Pyrotek Engineering Materials Ltd.
E47
GLASSWORKS HOUNSELL
LIMITED
C93
Logistic System Pichler GmbH
C94
INTCO GmbH
D05
Olivotto Glass Technologies S.p.A.
D15
BDF INDUSTRIES S.p.A.
D67
Huanghua Rongtai Mould Co., Ltd.
D20
Antonini S.r.l.
D69
E.ITEC S.A.S.
E55
Global Bottling
D22
Graphoidal Developments Ltd
D77
E56
D23
HORN Glass Industries AG
GPM-Glass Project Management
and Used Equipment
DuPont de Nemours International
S.A.
D24
A & L Rondot S.A.S
D81
Athena Engineering & Construction
E61
TIBTECH innovations
D32
Total Glass Lubricants Europe
GmbH
D85
Carborundum Universal Limited
E72-1
Nanjing Xinshu Machinery Co., Ltd.
D92
Lincoln GmbH,
Zentralschmiersysteme
E72-5
Henan Chief Way Industry Co.,
LTD.
D33
CO.MI.T S.r.l.
D45
Lattimer
E05
CAR-MET S.p.A.
E77
Zecchetti S.r.l.
D55
S.I.G.M.A. S.r.l.
E11
M.T. Forni Industriali S.r.l.
E81
OFFICINA MECCANICA
SESTESE S.p.A.
D61
Giancarlo Perego S.p.A.
E13
OCMI-OTG S.p.A.
E85
Bock Energietechnik
E21
FOR G, s.r.o.
E86
E23
Pemat Mischtechnik GmbH
Changshu Jinggong Mould Mfg.
Co., Ltd.
E93
Messersi’ Packaging S.r.l.
© 2010 Messe Düsseldorf GmbH
544
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
Hall 13, Continuation 3
F03
METAL INDUSTRIEL de CHAUNY
F07
AGK Hochleistungswerkstoffe
GmbH
F15
Parkinson-Spencer Refractories
Ltd.
F16
METRA
F24
King’s Metal Fiber Technologies
Co., Ltd.
F37
BURAKCAN KALIP SANAYI VE
TICARET LTD. STI
F38
Condat
F43
OCL India Limited
F54
NovoCOS GmbH
F64
Mopavid, S.L.
F79
All Glass S.r.l.
F93
LWN Lufttechnik GmbH
© 2010 Messe Düsseldorf GmbH
546
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
2.6 Hall 14
A02
Sogelub S.A.
A03
Merkad Makina Kalip San. Ve Tic.
Ltd. Sti.
A20
Bosch Rexroth AG Antriebstechnik
Zahnkette
A23
Heavydrive, Günter Übelacker Inh.
A25
Linn High Therm GmbH
A27
FTW Werner Würth GmbH
B05
Control & Heating Systems,
Dipl.-Ing. Rainer Pilz
B06
EMP GmbH
B12
Metavil - Empresa Transformadora
Metalo Vidreira, Lta.
B13
Kararmaz Kalip San. ve Tic. Ltd.
Sti.
B22
AMBEG Dr. J. Dichter GmbH
B23
GLASMA AB
B40
ALBAT+WIRSAM Software AG
C02
George Lane & Sons Ltd
C19
Heye International GmbH
© 2010 Messe Düsseldorf GmbH
548
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
Hall 14, Continuation 1
C20
ELIAR ELEKTRONIK A.S.
C40
Viprotron GmbH
D02
Kaltun Mining Co.
D03
G-LEHRS
D05
FIB Belgium s.a.
D06
Falorni Gianfranco srl
D13
Vidromecanica
D20
Ernst Pennekamp GmbH & Co.
oHG
D47
Löwinger GmbH,
Glasbearbeitungsmaschinenbau
E01
Becker Lehr Loader GmbH
E10
GLAMACO Maschinenbau GmbH
E12
HyGear BV
E17
Norddeutsche Seekabelwerke
GmbH
E20
LAT Maschinen + Antriebstechnik
GmbH & Co. KG
E24
Bystronic Maschinen AG
© 2010 Messe Düsseldorf GmbH
E40
Maschinenbau GEROLD GmbH &
Co. KG
E49
EWK Umwelttechnik GmbH
550
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
2.7 Hall 15
A03
euroTECH GmbH
A13
Nirvana Technologies (P) Ltd.
A13-A
REDWAVE - a trademark of
BT-Wolfgang Binder GmbH
A42
Lahti Precision Oy
A46
Excelsius Global Services GmbH
A54
Eurostar Concrete Technology
S.p.A.
B14
CONTEX GmbH,
HM-Verschleißtechnik
B21
Pannkoke Flachglastechnik GmbH
B37
Nikolaus Sorg GmbH + Co. KG
B42
Grenzebach Maschinenbau GmbH
C03
Glass Service Inc.
C11
STG - Software & Technologie Glas
GmbH
C22
Eirich GmbH & Co. KG, Gustav,
Maschinenfabrik
C24
ITALCARRELLI
C51
Hager Sondermaschinenbau
GmbH
© 2010 Messe Düsseldorf GmbH
552
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
Hall 15, Continuation 1
D03
Fejmert Mixer AB
D14
UAS Messtechnik GmbH
D25
HEGLA GmbH & Co. KG
D41
Grafotec Spray Systems GmbH
D47
McGill AirClean
E18
TNO
E22
IfG - Ingenieurbüro für Glastechnik
GmbH
E41
Hubtex Maschinenbau GmbH &
Co. KG
F42
SOFTSOLUTION GmbH
F48
Aachener Chemische Werke GmbH
F51
Cestaro srl
G14
Benteler Maschinenbau GmbH
© 2010 Messe Düsseldorf GmbH
554
glasstec – - DISCOVER THE WORLD OF GLASS /
DISCOVER THE WORLD OF SOLAR PRODUCTION
www.glasstec.de / www.solarpeq.de
2.8 Hall 16
A19
Elmag S.p.A.
A57
apb antonio piazza brevetti s.r.l.
C39
Optima S.r.l.
D60
Keraglass Engineering S.r.l.
© 2010 Messe Düsseldorf GmbH
556