R
MULTICONTACT CONNECTORS
Series
616 021
TECHNICAL DATA SHEET
NON ENVIRONMENTAL SIZE 5 CRIMP COAX SOCKET CONTACT
FOR RG142/U, RG223/U, KX23 and RG400 CABLES
DSX
20,30 0,799
20,15 0,793
Issue:
Page
29 DEC 03
1/2
6,45 0,254
5,75 0,226
10,93 0,430
10,49 0,413
RADIALL
616021
4,15 0,163
4,10 0,161
OUTER CONTACT
FERRULE
6,40 0,252
6,30 0,248
CENTER CONTACT
1,04 0,041
0,99 0,039
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
7,01 0,276
6,95 0,274
1,30 0,051
0,80 0,031
16,86 0,664
16,65 0,656
1,17 0,046
1,12 0,044
9,30 0,366
8,70 0,343
MATERIAL :
OUTER CONTACT : BERYLLIUM COPPER PER ASTM-B-196
INSULATOR : PTFE PER ASTM-D-1710 or EQUIVALENT
CENTER CONTACT and FERRULE: BRASS PER ASTM B 453/B453M or EQUIVALENT
CRIMP BARREL: BRASS PER ASTM B 455 or EQUIVALENT
FINISH:
ALL METALIC PARTS: .00005 OF GOLD PER MIL-G-45204, TYPE I or II, GRADE C ou D, CLASS 1 OVER PER QQ-N-290
DESIGN REQUIREMENTS
TEMPERATURE RANGE: -65°C to +125°C
IMPEDANCE : 50 OHMS NOMINALE
DIELECTRIC WITHSTANDING VOLTAGE: 750 V rms AT SEA LEVEL
VSWR: 1.3 from DC to 1500 MHz
EXTRACTION TOOL: 282946 (M81659/28-01) (MUST BE ORDER SEPARATLY)
WIRING INSTRUCTIONS: SEE PAGE 2/2
DIMENSIONS : mm (inch) CREATION
PEN:
4112_9311
5,60 0,220
5,51 0,217
NOM: JP MACARI
DATE: 12 MAY 82
APPR.:
616021EN
29 DEC 03 ADD. RG400 CABLE and see p2/2;supp RP4284 GOMBERT C.LAHOREAU
/
11/09/87 CREATION ENGLISH DRAW
FALETTI
Approved
Name
Issue
Revisions
R
MULTICONTACT CONNECTORS
TECHNICAL DATA SHEET
616 021
Issue:
29 DEC 03
9 0,354
4 0,157
FERRULE
6 0,236
STEP 1
STRIP CABLE TO DIMENSIONS SHOWN
SLIDE FERRULE OVER CABLE
This information is given as an indication.In the continual goal to improve our products,we reserve the right to make any modifications judged necessary.
WARNING
OUTER SHIELD AND
INNER SHIELD
(sometimes)
CENTER
CONTACT
STEP 2
SLIDE CENTER CONTACT BARREL OVER CABLE CONDUCTOR
CONTACT SHOULDER BUTTING AGAINST CABLE DIELECTRIC
CRIMP CENTER CONTACT
CRIMPING TOOL : M22250/2-01 (RADIALL 282281)
SELECTOR ON: 6 for RG400 CABLE
SELECTOR ON: 8 for RG142/U; RG223/U; KX23 CABLES
POSITIONNER : RADIALL 282974
FLARE SHIELDS
CRIMPING TOOL and POSITIONNER MUST BE ORDER SEPARATLY
STEP 3 :
INSERT CENTER CONTACT INTO THE OUTER CONTACT BODY
PLACE SHIELDS OVER KNURLED PART OF OUTER CONTACT BODY
4112_9311
STEP 4 :
SLIDE FERRULE OVER SHIELDS UNTIL TO DIMENSIONS SHOWN
CRIMP FERRULE
CRIMPING TOOL: M22520/5-01 (RADIALL 282293)
DIE : M22520/5-05 (RADIALL 282246)
HEX: A 5,40 (.213) / FLATS
CRIMPING TOOL and DIE MUST BE ORDER SEPARATLY
616021EN
Page
2/2