LED Luminaires
Wallpacks
Floods
Roadway
Retrofits
High/Low Bay
Canopy/Garage
Vaportight
Bollards
our brands...
Exitronix has been at the forefront of the LED lighting revolution since 1984,
featuring a full line of innovative exit and emergency life safety products.
specialtyLED creates vibrant color and drama with energy efficient
solutions for indoor and outdoor architectural and decorative applications.
Trace*Lite focuses on performance and versatility, providing ground-up
LED solutions for indoor and outdoor commercial and industrial lighting
applications.
Indoor Grow Science is the leader in specialized lighting solutions for the
indoor horticulture industry using patented technology to closely replicate
the natural growing cycles of plants.
our vision...
To incorporate our cornerstones of integrity, innovation, quality and
flexibility into every team member and product. We’ll constantly improve
upon our reputation of delivering world-class service and leading edge
lighting solutions that our customers want - when they need it.
our mission...
To exceed customer expectations. We’ll do this by maintaining consistent
profitable growth and delivering exceptional product design, quality and
value leading to an unparalleled customer experience.
terms & symbols
getting to know your icons
UL (Underwriters Laboratories) The UL Mark means that
UL has tested and evaluated representative samples
of that product and determined that they meet UL
requirements.
ETL (Intertek) The ETL Mark is proof of product compliance
to North American safety standards. Code officials across
the US and Canada accept the ETL Listed Mark as proof
of product compliance to published industry standards.
CE (European Conformity) Indicates the compliance
with EU legislation of a product, wherever in the world
manufactured, and enables its free movement within the
European market.
IP66
IP (Ingress Protection) Classifies and rates the degree of
protection provided against intrusion such as body parts
(hands and fingers), dust, accidental contact, and water
by mechanical casings and electrical enclosures.
Title 24 (California) Energy efficiency standards for
residential and non-residential buildings established by
legislation in 1978 in order to reduce California’s energy
consumption.
DLC (Designlights Consortium™) The Qualified Products
List is a list of LED/SSL products that have been tested
at a DLC approved laboratory that comply with the
specified performance and energy efficiency criteria.
ARRA (American Recovery & Reinvestment Act)
Products marked with this logo are compliant or can be
manufactured to be compliant with the ARRA and Buy
American provisions.
RoHS (Restriction of Hazardous Substances) The RoHS
directive aims to restrict certain dangerous substances,
such as mercury and lead, commonly used in electronic
and electronic equipment.
COMPLIANT
DARKSKY Compliant Full cutoff fixtures eliminate light
escaping above the horizontal plane, reducing light
pollution and saving energy by only directing the light
towards it’s intended target.
TRACE*LITE Warranty Products with this logo have a full
manufacturer’s warranty for mechanical or electrical
defects for the term specified. Does not cover physical
abuse or installation error.
table of contents
explore the led advantage
Wallpacks
TLED-NFS Nyte Forms Small.............................................5
TLED-NFM Nyte Forms Medium......................................6
TLED-NFL Nyte Forms Large............................................7
TLED110P Architectural Wallpack.................................8
TLED110EXP Large Architectural Wallpack..................9
TLED111P Architectural Wallpack...............................10
TLED112P Architectural Wallpack...............................11
TLED106P Wallpack.......................................................12
TLED106EXP Large Wallpack........................................13
TLED101 Mini Polycarbonate Wallpack......................14
Canopy/Garage
TLED-C-G Canopy Garage Optics..............................16
TLED-C-P Canopy Performance Optics......................17
TLED-SC-G Garage Optics w/Motion Sensor.............18
TLED-SC-P Performance Optics w/Motion Sensor......19
TLED-C-LG Canopy Low Glare Optics........................20
Floods
TLED-XPF Extreme Performance Flood........................22
TLED-FHB Flood..............................................................23
TLED220 Landscape Bullet Flood ................................24
TLED221 Compact Flood..............................................25
TLED223 Low Profile Flood.............................................26
High/Low Bays
TLED-FHB High Bay.........................................................23
TLED528A Linear Highbay.............................................28
Vaportights
TLED-LVT Linear Vaportight...........................................30
TLED804 Vaportight.......................................................31
Retrofit
TLED-RK Linear LED Retro Fit Kit ...................................33
Roadway
TLED612 Dusk to Dawn..................................................34
Bollards
TLED-B-HA High Abuse Bollard.....................................36
TLED-B Bollard................................................................37
Photometrics
Photometrics at a Glance...........................................38
NYTE FORMS
convertible multi-purpose luminaire family
led outdoor lighting... transformed
Transforming LED sconce-style wall packs to meet demanding outdoor lighting requirements, the Nyte
Forms series delivers energy efficient cutting-edge technology for superior performance with a simple yet
sophisticated style that accents traditional and modern buildings.
Nyte Forms creates a new standard in application versatility and design consistency, adapting for use as a
wet location UL listed wall pack, wall washer, flood light or area light with a simple bracket change.
Offered in three sizes, this convertible multi-purpose luminaire family integrates excellence in LED illumination
with a durable, consistent architectural package.
A 4 in 1 product...
TLED-NFS
Nyte Forms Small LED Wallpack
WALLPACKS
FEATURES
•14 watt LED light engine provides 1322 initial delivered lumens
•Precision designed aluminum housing with stainless steel
hardware, tempered glass lens and a UV resistant, thermoset
polyester powder coat finish.
•Includes back plate with built in level that can be easily
mounted to any vertical surface and is readily wired to a
recessed J-box
•Durable heavy duty housing, unit is designed for ambient
temperatures up to 122°F (50°C)
•1/2” knuckle mount is included as standard for floodlighting
applications
Includes 1/2"
adjustable knuckle
•50,000 hour rated lamp life with 70% lumen maintenance
•3000K, 4000K or 5000K (std.)
•Constant current, high efficiency Class 2 LED driver with active
power factor correction (0.90 typical)
•0-10V dimming included standard
•120~277VAC voltage sensing input
•Available with BB option that provides emergency powered
illumination at full lumen output
•Internal battery heater option also available to extend to
operating range of the emergency battery backup option (BB)
down to temperatures as low as -4°F (-20°C)
•LED light engine emits extremely low UV and minimal heat
•Fixture series may be built to comply with the American
Recovery and Reinvestment Act of 2009 (ARRA) requirements
and Buy American provisions - call factory for details
•DesignLights Consortium™ Qualified Product
•UL Listed for Wet Locations
•10 year warranty, see TRACE*LITE terms and conditions for
details
.47”
5.90”
6.30”
.67”
2.95”
5.79”
6.73”
3.53”
3.53”
Approximate Weight: 4 lbs.
ORDERING INFORMATION
Example: TLED-NFS-14-VS-4K
Series
Nominal Wattage
Input Voltage
CCT Temperature
Finish
Options (Factory Installed)
TLED-NFS1
14 = 14 Watts
VS = 120~277VAC Voltage Sensing
3K = 3000K
BLANK = Bronze (Std.)
BB = Battery Backup
4K = 4000K
WH = White
IH12 = 120VAC Internal Heater
5K = 5000K (Std.)
USA = Meets Buy America Requirements
Notes
1
Includes 1/2" knuckle mount standard
2
Available with BB option only
Accessories4 (Field Installed)
3
Not available on units with BB option. Remote or external photocells are compatible. Consult factory for details.
PC13 = 120VAC Photocontrol
4
Order as separate line item
PC23 = 277VAC Photocontrol
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
5
TLED-NFM
WALLPACKS
Nyte Forms Medium LED Wallpack
FEATURES
•42 watt LED light engine provides 4080 initial delivered lumens
•Precision designed aluminum housing with stainless steel
hardware, tempered glass lens, and a UV resistant, thermoset
polyester powder coat finish
•Includes back plate with built-in level that can be easily
mounted to any vertical surface and is readily wired to a
recessed J-box
•Durable and heavy duty housing, unit is designed for ambient
temperatures up to 122°F (50°C)
Optional yoke mount (SWE)
•One tapped hole (1/2” NPS) on each side and top for conduit
or photo-control. Complete with closure plugs
•50,000 hour rated lamp life with 70% lumen maintenance
•3000K, 4000K or 5000K (std.)
•Constant current, high efficiency Class 2 LED driver with active
power factor correction (0.90 typical)
•0-10V dimming included standard
•120~277VAC voltage sensing input standard with optional
347VAC and 480VAC input available
•Available with BB option that provides emergency powered
illumination at full lumen output
•Internal battery heater option also available to extend to
operating range of the emergency battery backup option (BB)
down to temperatures as low as -4°F (-20°C)
•LED light engine emits extremely low UV and minimal heat
•Optional yoke mount, 2” slipfitter mount or a 6” pole mount
arm are also available for floodlighting and area lighting
applications
•Fixture series may be built to comply with the American
Recovery and Reinvestment Act of 2009 (ARRA) requirements
and Buy American provisions - call factory for details
•DesignLights Consortium™ Qualified Product
8.07”
8.65”
•UL Listed for Wet Locations
•10 year warranty, see TRACE*LITE terms and conditions for
details
10.61”
1.48”
5.24”
11.80”
Approximate Weight: 10 lbs.
ORDERING INFORMATION
Example: TLED-NFM-42-VS-4K
Series
Nominal Wattage
Input Voltage
CCT Temperature
Finish
Options (Factory Installed)
TLED-NFM
42 = 42 Watts
VS = 120~277VAC Voltage Sensing
3K = 3000K
BLANK = Bronze (Std.)
BB = Battery Backup
347 = 347VAC
4K = 4000K
IH12 = 120VAC Internal Heater
480 = 480VAC
5K = 5000K (Std.)
USA = Meets Buy America Requirements
Accessories4 (Field Installed)
Notes
6
PC13 = 120VAC Photocontrol
1
Not available with 347VAC or 480VAC
PC23 = 277VAC Photocontrol
2
Available with BB option only
SFE = 2” Slipfitter Mount
3
Not available on units with BB option. Remote or external photocells are compatible. Consult factory for details.
EXM6-E = 6” Pole Mount Arm
4
Order as separate line item
SWE = Yoke Mount
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED-NFL
Nyte Forms Large LED Wallpack
WALLPACKS
FEATURES
•79 watt LED light engine provides 7669 initial delivered lumens
•Precision designed aluminum housing with stainless steel
hardware, tempered glass lens, and a UV resistant, thermoset
polyester powder coat finish
•Includes back plate with built-in level that can be easily
mounted to any vertical surface and is readily wired to a
recessed J-box
•Durable and heavy duty housing, unit is designed for ambient
temperatures up to 122°F (50°C)
•One tapped hole (1/2” NPS) on each side and top for conduit
or photo-control. Complete with closure plugs
•50,000 hour rated lamp life with 70% lumen maintenance
Optional slipfitter mount (SFE)
•3000K, 4000K or 5000K (std.)
•Constant current, high efficiency Class 2 LED driver with active
power factor correction (0.98 typical)
•0-10V dimming included standard
•120~277VAC voltage sensing input standard with optional
347VAC and 480VAC input available
•Available with BB option that provides emergency powered
illumination at full lumen output
•Internal battery heater option also available to extend to
operating range of the emergency battery backup option (BB)
down to temperatures as low as -4°F (-20°C)
•LED light engine emits extremely low UV and minimal heat
•Optional yoke mount, 2” slipfitter mount or a 6” pole mount
arm are also available for floodlighting and area lighting
applications
•Fixture series may be built to comply with the American
Recovery and Reinvestment Act of 2009 (ARRA) requirements
and Buy American provisions - call factory for details
•DesignLights Consortium™ Qualified Product
•UL Listed for Wet Locations
8.07”
8.65”
•10 year warranty, see TRACE*LITE terms and conditions for
details
10.61”
11.80”
1.48”
7.78”
Approximate Weight: 15 lbs.
ORDERING INFORMATION
Example: TLED-NFL-79-VS-4K-BB
Series
Nominal Wattage
Input Voltage
CCT Temperature
Finish
Options (Factory Installed)
TLED-NFL
79 = 79 Watts
VS = 120~277VAC Voltage Sensing
3K = 3000K
BLANK = Bronze (Std.)
BB = Battery Backup
347 = 347VAC
4K = 4000K
IH12 = 120VAC Internal Heater
480 = 480VAC
5K = 5000K (Std.)
USA = Meets Buy America Requirements
Accessories4 (Field Installed)
Notes
PC13 = 120VAC Photocontrol
1
Not available with 347VAC or 480VAC
PC23 = 277VAC Photocontrol
2
Available with BB option only
SFE = 2” Slipfitter Mount
3
Not available on units with BB option. Remote or external photocells are compatible. Consult factory for details.
EXM6-E = 6” Pole Mount Arm
4
Order as separate line item
SWE = Yoke Mount
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
7
TLED110P
3rd Generation Architectural LED Wallpack
WALLPACKS
FEATURES
•27 to 40 watt LED light engines provide 1866 to 3050 initial
delivered lumens
•Efficient design produces up to 76 lumens per watt
•50,000 hour rated lamp life with 70% lumen maintenance
•3000K, 4000K or 5000K color temperature and a CRI of ≥85
•High power LED light engine with a constant current control
driver
•LED light engine emits extremely low UV and minimal heat
•Battery back-up option (BB) provides approximately 1400
lumens for 90 minutes in the event of a primary power failure
•Durable, corrosion-resistant, die-cast aluminum enclosure with
a UV resistant powder coat finish, LEDs are protected by an
impact resistant tempered glass lens
•Can be mounted to any vertical surface and is easily wired to
either a recessed J-box or by using surface mount conduit
COMPLIANT
•Optional 10kV, 3-leaded transient surge device protects LineGround, Line-Neutral, and Neutral-Ground in accordance with
IEEE/ANSI C62.41.2 guidelines
•UL Listed for Wet Locations
•DesignLights Consortium™ Qualified Product
•5 year warranty on all components
Approximate Weight: 16.5 lbs.
ORDERING INFORMATION
Example: TLED110P-42-VS-5K-TRH
Series
Number of LEDs
Input Voltage
CCT
TLED110P
42 = 42 LEDs (27 Watts)
VS = 120~277VAC Voltage Sensing
3K = 3000K
Options (Factory Installed)
BB = Battery Backup
54 = 54 LEDs (34 Watts)
4K = 4000K
SZXXX1 = Single Line Side Fuse (120V or 277V)
66 = 66 LEDs (40 Watts)
5K = 5000K
TP = Transient Protection System
TRH = Tamper Resistant Hardware
CC2 = Custom Color
Accessories3 (Field Installed)
PC1 = 120VAC Photocontrol
Notes
8
PC2 = 277VAC Photocontrol
1
Specify voltage
WG110P = Wire Guard
2
Consult factory for specific part number and details
PG110P = Polycarbonate Lens Guard
3
Order as separate line item
RFL110 = Replacement Frosted Glass Lens
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED110EXP
3rd Generation Architectural Large LED Wallpack
WALLPACKS
FEATURES
•27 to 54 watt LED light engines provide 2037 to 4714 initial
delivered lumens
•Efficient design produces up to 88 lumens per watt
•50,000 hour rated lamp life with 70% lumen maintenance
•3000K, 4000K or 5000K color temperature and a CRI of ≥83
•High power LED light engine with a constant current control
driver
•LED light engine emits extremely low UV and minimal heat
•Battery back-up option (BB) provides approximately 1400
lumens for 90 minutes in the event of a primary power failure
•Durable, corrosion-resistant, die-cast aluminum enclosure with
a UV resistant powder coat finish, LEDs are protected by an
impact resistant tempered glass lens
•Can be mounted to any vertical surface and is easily wired to
either a recessed J-box or by using surface mounted conduit
•Optional 10kV, 3-leaded transient surge device protects LineGround, Line-Neutral, and Neutral-Ground in accordance with
IEEE/ANSI C62.41.2 guidelines
COMPLIANT
•UL Listed for Wet Locations
•DesignLights Consortium™ Qualified Product
•5 year warranty on all components
Approximate Weight: 25 lbs.
ORDERING INFORMATION
Example: TLED110EXP-42-VS-5K-TRH
Series
Number of LEDs
Input Voltage
CCT
Options (Factory Installed)
TLED110EXP
42 = 42 LEDs (27 Watts)
VS = 120~277VAC Voltage Sensing
3K = 3000K
BB = Battery Backup
54 = 54 LEDs (34 Watts)
4K = 4000K
SZXXX1 = Single Line Side Fuse (120V or 277V)
66 = 66 LEDs (43 Watts)
5K = 5000K
TP = Transient Protection System
72 = 72 LEDs (46 Watts)
TRH = Tamper Resistant Hardware
90 = 90 LEDs (54 Watts)
CC2 = Custom Color
Accessories3 (Field Installed)
PC1 = 120VAC Photocontrol
Notes
PC2 = 277VAC Photocontrol
1
Specify voltage
WG110EX = Wire Guard
2
Consult factory for specific part number and details
PG110EX = Polycarbonate Lens Guard
3
Order as separate line item
RLF110EX = Replacement Frosted Glass Lens
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
9
TLED111P
3rd Generation Architectural LED Wallpack
WALLPACKS
FEATURES
•27 to 56 watt LED light engines provide 2155 to 4873 initial
delivered lumens
•Efficient design produces up to 87 lumens per watt
•50,000 hour rated lamp life with 70% lumen maintenance
•3000K, 4000K or 5000K color temperature and a CRI of ≥85
•High power LED light engine with a constant current control
driver
•LED light engine emits extremely low UV and minimal heat
•Battery back-up option (BB) provides approximately 1400
lumens for 90 minutes in the event of a primary power failure
•Durable, corrosion-resistant, die-cast aluminum enclosure with
a UV resistant powder coat finish, LEDs are protected by an
impact resistant tempered glass lens
•Can be mounted to any vertical surface and is easily wired to
either a recessed J-box or by using surface mounted conduit
COMPLIANT
•Optional 10kV, 3-leaded transient surge device protects LineGround, Line-Neutral, and Neutral-Ground in accordance with
IEEE/ANSI C62.41.2 guidelines
•UL Listed for Wet Locations
•DesignLights Consortium™ Qualified Product
•5 year warranty on all components
7.00”
18.125”
8.66”
Approximate Weight: 22 lbs.
ORDERING INFORMATION
Example: TLED111P-42-VS-5K-TRH
Series
Number of LEDs
Input Voltage
CCT
Options (Factory Installed)
TLED111P
42 = 42 LEDs (27 Watts)
VS = 120~277VAC Voltage Sensing
3K = 3000K
BB = Battery Backup
54 = 54 LEDs (34 Watts)
4K = 4000K
SZXXX1 = Single Line Side Fuse (120V or 277V)
66 = 66 LEDs (43 Watts)
5K = 5000K
TP = Transient Protection System
72 = 72 LEDs (46 Watts)
TRH = Tamper Resistant Hardware
90 = 90 LEDs (56 Watts)
CC2 = Custom Color
Notes
10
Accessories3 (Field Installed)
1
Specify voltage
PC1 = 120VAC Photocontrol
2
Consult factory for specific part number and details
PC2 = 277VAC Photocontrol
3
Order as separate line item
RLF111 = Replacement Frosted Glass Lens
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED112P
3rd Generation Architectural LED Wallpack
WALLPACKS
FEATURES
•27 to 45 watt LED light engines provide 2152 to 3805 initial
delivered lumens
•Efficient design produces up to 86 lumens per watt
•50,000 hour rated lamp life with 70% lumen maintenance
•3000K, 4000K or 5000K color temperature and a CRI of ≥85
•High power LED light engine with a constant current control
driver
•LED light engine emits extremely low UV and minimal heat
•Battery back-up option (BB) provides approximately 1400
lumens for 90 minutes in the event of a primary power failure
•Durable, corrosion-resistant, die-cast aluminum enclosure with
a UV resistant powder coat finish, LEDs are protected by an
impact resistant tempered glass lens
•Can be mounted to any vertical surface and is easily wired to
either a recessed J-box or by using surface mounted conduit
•Optional 10kV, 3-leaded transient surge device protects LineGround, Line-Neutral, and Neutral-Ground in accordance with
IEEE/ANSI C62.41.2 guidelines
COMPLIANT
•UL Listed for Wet Locations
•DesignLights Consortium™ Qualified Product
•5 year warranty on all components
9.05”
18.1”
9.05”
Approximate Weight: 13 lbs.
ORDERING INFORMATION
Example: TLED112P-42-VS-5K-TRH
Series
Number of LEDs
Input Voltage
CCT
Options (Factory Installed)
TLED112P
42 = 42 LEDs (27 Watts)
VS = 120~277VAC Voltage Sensing
3K = 3000K
BB = Battery Backup
54 = 54 LEDs (34 Watts)
4K = 4000K
SZXXX1 = Single Line Side Fuse (120V or 277V)
66 = 66 LEDs (43 Watts)
5K = 5000K
TP = Transient Protection System
72 = 72 LEDs (45 Watts)
TRH = Tamper Resistant Hardware
CC2 = Custom Color
Notes
Accessories3 (Field Installed)
1
Specify voltage
PC1 = 120VAC Photocontrol
2
Consult factory for specific part number and details
PC2 = 277VAC Photocontrol
3
Order as separate line item
RLF112 = Replacement Frosted Glass Lens
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
11
TLED106P
3rd Generation LED Wallpack
WALLPACKS
FEATURES
•27 to 41 watt LED light engines provide 2223 to 3569 initial
delivered lumens
•Efficient design produces up to 87 lumens per watt
•50,000 hour rated lamp life with 70% lumen maintenance
•3000K, 4000K or 5000K color temperature and a CRI of ≥85
•High power LED light engine with a constant current control
driver
•LED light engine emits extremely low UV and minimal heat
•Battery back-up option (BB) provides approximately 1400
lumens for 90 minutes in the event of a primary power failure
•Durable, corrosion-resistant, die-cast aluminum enclosure with
a UV resistant powder coat finish, LEDs are protected by an
impact resistant borosilicate prismatic glass lens
•Can be mounted to any vertical surface and is easily wired to
either a recessed J-box or by using surface mounted conduit
•Optional 10kV, 3-leaded transient surge device protects LineGround, Line-Neutral, and Neutral-Ground in accordance with
IEEE/ANSI C62.41.2 guidelines
•UL Listed for Wet Locations
•5 year warranty on all components
Approximate Weight: 13 lbs.
ORDERING INFORMATION
Example: TLED106P-42-VS-5K-TRH
Series
Number of LEDs
Input Voltage
CCT
TLED106P
42 = 42 LEDs (27 Watts)
VS = 120~277VAC Voltage Sensing
3K = 3000K
Options (Factory Installed)
BB = Battery Backup
54 = 54 LEDs (34 Watts)
4K = 4000K
SZXXX1 = Single Line Side Fuse (120V or 277V)
66 = 66 LEDs (41 Watts)
5K = 5000K
TP = Transient Protection System
TRH = Tamper Resistant Hardware
CC2 = Custom Color
Accessories3 (Field Installed)
PC1 = 120VAC Photocontrol
PC2 = 277VAC Photocontrol
Notes
12
WG106 = Wire Guard
1
Specify voltage
PG106 = Polycarbonate Lens Guard
2
Consult factory for specific part number and details
FC106 = Full Cutoff Shield
3
Order as separate line item
FRM/GL106 = Frame & Glass Assembly
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533-3948 • barronltg.com
TLED106EXP
3rd Generation Large LED Wallpack
WALLPACKS
FEATURES
•27 to 55 watt LED light engines provide 2211 to 4755 initial
delivered lumens
•Efficient design produces up to 85 lumens per watt
•50,000 hour rated lamp life with 70% lumen maintenance
•3000K, 4000K or 5000K color temperature and a CRI of ≥85
•High power LED light engine with a constant current control
driver
•LED light engine emits extremely low UV and minimal heat
•Battery back-up option (BB) provides approximately 1400
lumens for 90 minutes in the event of a primary power failure
•Durable, corrosion-resistant, die-cast aluminum enclosure with
a UV resistant powder coat finish, LEDs are protected by an
impact resistant borosilicate prismatic glass lens
•Can be mounted to any vertical surface and is easily wired to
either a recessed J-box or by using surface mounted conduit
•Optional 10kV, 3-leaded transient surge device protects LineGround, Line-Neutral, and Neutral-Ground in accordance with
IEEE/ANSI C62.41.2 guidelines
•UL Listed for Wet Locations
•5 year warranty on all components
9.5”
18.125”
9”
Approximate Weight: 25 lbs.
ORDERING INFORMATION
Example: TLED106EXP-42-VS-5K-TRH
Series
Number of LEDs
Input Voltage
CCT
Options (Factory Installed)
TLED106EXP
42 = 42 LEDs (27 Watts)
VS = 120~277VAC Voltage Sensing
3K = 3000K
BB = Battery Backup
54 = 54 LEDs (33 Watts)
4K = 4000K
SZXXX1 = Single Line Side Fuse (120V or 277V)
66 = 66 LEDs (42 Watts)
5K = 5000K
TP = Transient Protection System
72 = 72 LEDs (45 Watts)
TRH = Tamper Resistant Hardware
90 = 90 LEDs (55 Watts)
CC2 = Custom Color
Accessories3 (Field Installed)
PC1 = 120VAC Photocontrol
PC2 = 277VAC Photocontrol
Notes
WG106EX = Wire Guard
1
Specify voltage
PG106EX = Polycarbonate Lens Guard
2
Consult factory for specific part number and details
FC106EX = Full Cutoff Shield
3
Order as separate line item
FRM/GL106EX = Frame & Glass Assembly
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533-3948 • barronltg.com
13
TLED101
Mini Polycarbonate LED Wallpack
WALLPACKS
FEATURES
•13 watt COB LED light engine provides 770 initial delivered
lumens
•5000K color temperature and a CRI of ≥70
•LED light engine emits extremely low UV and minimal heat
•Precision molded polycarbonate housing is mounted to a
die-cast aluminum base plate that provides superior heat
dissipation while still maintaining an economical luminaire with
durable performance
•Mounts to any vertical surface and easily attaches to a 3” or 4”
J-box or can be surface mounted using the ½” conduit entry
point at the bottom of the housing
•Optional 10kV, 3-leaded transient surge device protects LineGround, Line-Neutral, and Neutral-Ground in accordance with
IEEE/ANSI C62.41.2 guidelines
•Suitable for wet locations
•5 year warranty on all components
11”
6.89”
5.24”
Approximate Weight: 4 lbs.
ORDERING INFORMATION
Example: TLED101-13-DT-5K-TP
Series
Total Watts (Nominal)
Input Voltage
CCT
Options (Factory Installed)
Accessories1 (Field Installed)
TLED101
13 = 13 Watts
DT = 120/277VAC
5K = 5000K
TP = Transient Protection System
PC2 = 277VAC Photocontrol
Notes
1
14
Order as separate line item
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED-C
canopy • garage luminaire
TRACE*LITE Enhanced, DLC Listed Optics
The DesignLight Consortium™ (DLC) which supports only high-quality, high performing commercial LED
products, includes the TLED-C enhanced fixtures on its Qualified Products List. TLED-C units featuring Garage
and Performance optics are listed by the DLC and qualify for utility rebates across the country.
Energy Savings
The TLED-C Canopy/Garage Luminaire has been designed with a high performing SSL light engine and
multiple lumen packages. Thermal temperatures are controlled with a special LEDLITElogic heat sinking
technology to maximize LED longevity making the TLED-C a perfect energy saving solution.
Low Maintenance
Consuming less than half the energy used by traditional lamp sources, the TLED-C Canopy/Garage Luminaire
maximizes performance while dramatically increasing energy savings. With maintenance relamping intervals
of up to fifty times less than traditional lamp technologies, LED not only provides substantial savings in energy
consumption but also reduces landfill pollution by minimizing a fixture’s impact on the environment.
TLED-C-G
Surface & Recessed Mount LED Garage Lighting
FEATURES
•Available with either 18, 24, 36, 48 or 64 LEDs, consuming only
21, 28, 41, 55 or 72 total watts and providing 1907, 2817, 4119,
5712 or 7249 initial delivered lumens, respectively
•Garage optics offer more distribution in the 60° to 80° zones,
ideal for the ≤15’ mounting heights needed in garage
applications
•190,000 hour rated lamp life with 70% lumen maintenance
•4700K color temperature and a CRI of ≥72
Trapezoid Canopy (TC)
•High power LED light engine with a 0-10V dimmable, constant
current control driver
CANOPY / GARAGE
•Durable, die-formed aluminum enclosure with a UV resistant,
powder coat finish; LEDs are protected by heat and impact
resistant, UV stabilized, polycarbonate lens
Standard Canopy (C)
Recessed Canopy (RC)
•Easily wired to either a recessed J-box, pendant mounted using
a standard 1/2” threaded downrod (supplied by others) or
recessed mounted (TLED-RC only)
•LED light engine emits extremely low UV and minimal heat; it is
RoHS compliant and is mercury and lead free
•ETL Listed for Wet Locations
•DesignLights Consortium™ Qualified Product
•5 year warranty on all components
SURFACE STANDARD
SURFACE TRAPEZOID
12.00”
13.46”
2.71”
RECESSED
2.71”
3.45”
16.00”
10.5”
1.2”
2.25”
Approximate Weight: 14 lbs.
ORDERING INFORMATION
Example: TLED-TC-24-VS-G-WW
Series
# of LEDs
Input Voltage
Optics
Finish (Housing/Trim)
Options (Factory Installed)
TLED-C = Standard Canopy
18 = 18 LEDs
VS = 120~277VAC Voltage Sensing
G = Garage Optics
WW = White/White
TP = Transient Protection System
TLED-TC = Trapezoid Canopy
24 = 24 LEDs
TLED-RC = Recessed Canopy
36 = 36 LEDs
CC1 = Custom Color
48 = 48 LEDs
64 = 64 LEDs
Notes
16
Accessories2 (Field Installed)
1
Consult factory for specific part number and details
PC1 = 120VAC Photocontrol
2
Order as separate line item
PC2 = 277VAC Photocontrol
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED-C-P
Surface & Recessed Mount LED Performance Lighting
FEATURES
•Available with either 18, 24, 36, 48 or 64 LEDs, consuming only
21, 28, 41, 55 or 72 total watts and providing 2004, 2936, 4210,
5391 or 7309 initial delivered lumens, respectively
•Performance optic offers more distribution in the 30° to 60°
zones, ideal for higher mounting heights over 12 feet
•190,000 hour rated lamp life with 70% lumen maintenance
•4700K color temperature and a CRI of ≥72
•High power LED light engine with a 0-10V dimmable, constant
current control driver
Trapezoid Canopy (TC)
•Easily wired to either a recessed J-box, pendant mounted using
a standard 1/2” threaded downrod (supplied by others) or
recessed mounted (TLED-RC only)
•LED light engine emits extremely low UV and minimal heat; it is
RoHS compliant and is mercury and lead free
Standard Canopy (C)
Recessed Canopy (RC)
•ETL Listed for Wet Locations
•DesignLights Consortium™ Qualified Product
•5 year warranty on all components
SURFACE STANDARD
CANOPY / GARAGE
•Durable, die-formed aluminum enclosure with a UV resistant,
powder coat finish; LEDs are protected by heat and impact
resistant, UV stabilized, polycarbonate lens
SURFACE TRAPEZOID
12.00”
13.46”
2.71”
RECESSED
2.71”
3.45”
16.00”
10.5”
1.2”
2.25”
Approximate Weight: 14 lbs.
ORDERING INFORMATION
Example: TLED-TC-24-VS-P-WW
Series
# of LEDs
Input Voltage
Optics
Finish (Housing/Trim) Options (Factory Installed)
TLED-C = Standard Canopy
18 = 18 LEDs
VS = 120~277VAC Voltage Sensing
P = Performance Optics
WW = White/White
TLED-TC = Trapezoid Canopy
24 = 24 LEDs
TLED-RC = Recessed Canopy
36 = 36 LEDs
TP = Transient Protection System
CC1 = Custom Color
48 = 48 LEDs
Notes
64 = 64 LEDs
Accessories2 (Field Installed)
1
Consult factory for specific part number and details
PC1 = 120VAC Photocontrol
2
Order as separate line item
PC2 = 208-277VAC Photocontrol
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
17
TLED-SC-G
Surface Mount LED Garage Lighting - Integrated Occupancy & Daylight Sensor
FEATURES
•Available with either 18, 24, 36, 48 or 64 LEDs, consuming only
21, 28, 41, 55 or 75 total watts and providing 1907, 2817, 4119,
5712 or 7250 initial delivered lumens, respectively
•Included factory installed Wattstopper occupancy and
daylight sensor allows for fully adjustable, motion controlled
high and low dimmed light levels via the 0-10V dimming driver
in the fixture and features an adjustable time delay and cut
off delay
CANOPY / GARAGE
•Garage optics offer more distribution in the 60° to 80° zones,
ideal for the ≤15’ mounting heights needed in garage
applications
•190,000 hour rated lamp life with 70% lumen maintenance
•4700K color temperature and a CRI of ≥72
•High power LED light engine with a 0-10V dimmable, constant
current control driver
•Durable, die-formed aluminum enclosure with a UV resistant,
powder coat finish; LEDs are protected by heat and impact
resistant, UV stabilized, polycarbonate lens
•Easily wired to either a recessed J-box
•Conforms to Title 24 requirements with regards to dimming and
control of light fixtures
•LED light engine emits extremely low UV and minimal heat; it is
RoHS compliant and is mercury and lead free
•ETL Listed for Wet Locations
•DesignLights Consortium™ Qualified Product
14.30”
•5 year warranty on all components
2.49”
3.09”
12.30”
Approximate Weight: 14 lbs.
ORDERING INFORMATION
Example: TLED-SC-24-VS-G-WW
Series
# of LEDs
Input Voltage
Optics
Finish (Housing/Trim)
Options (Factory Installed)
TLED-SC = Standard Canopy
18 = 18 LEDs
VS = 120~277VAC Voltage Sensing
G = Garage Optics
WW = White/White
TP = Transient Protection System
24 = 24 LEDs
36 = 36 LEDs
48 = 48 LEDs
64 = 64 LEDs
18
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED-SC-P
Surface Mount LED Performance Lighting - Integrated Occupancy & Daylight Sensor
FEATURES
•Available with either 18, 24, 36, 48 or 64 LEDs, consuming only
21, 28, 41, 55 or 72 total watts and providing 1964, 2870, 4115,
5593 or 7309 initial delivered lumens, respectively
•Included factory installed Wattstopper occupancy and
daylight sensor allows for fully adjustable, motion controlled
high and low dimmed light levels via the 0-10V dimming driver
in the fixture and features an adjustable time delay and cut
off delay
•Performance optic offers more distribution in the 30° to 60°
zones, ideal for higher mounting heights over 12 feet
CANOPY / GARAGE
•190,000 hour rated lamp life with 70% lumen maintenance
•4700K color temperature and a CRI of ≥72
•High power LED light engine with a 0-10V dimmable, constant
current control driver
•Durable, die-formed aluminum enclosure with a UV resistant,
powder coat finish; LEDs are protected by heat and impact
resistant, UV stabilized, polycarbonate lens
•Easily wired to either a recessed J-box
•Conforms to Title 24 requirements with regards to dimming and
control of light fixtures
•LED light engine emits extremely low UV and minimal heat; it is
RoHS compliant and is mercury and lead free
•ETL Listed for Wet Locations
•DesignLights Consortium™ Qualified Product
•5 year warranty on all components
14.30”
2.49”
3.09”
12.30”
Approximate Weight: 14 lbs.
ORDERING INFORMATION
Example: TLED-SC-24-VS-P-WW
Series
# of LEDs
Input Voltage
Optics
Finish (Housing/Trim)
Options (Factory Installed)
TLED-SC = Standard Canopy
18 = 18 LEDs
VS = 120~277VAC Voltage Sensing
P = Performance Optics
WW = White/White
TP = Transient Protection System
24 = 24 LEDs
36 = 36 LEDs
48 = 48 LEDs
64 = 64 LEDs
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
19
TLED-C-LG
Surface & Recessed Mount LED Low Glare Lighting
FEATURES
•Available with either 20, 36, 48 or 64 LEDs, consuming only 23,
41, 54 or 72 total watts and providing 2320, 4208, 5564 or 7297
initial delivered lumens, respectively
•Low glare optic design not only provides excellent Type VS
distribution, it leads the industry in canopy glare control
•190,000 hour rated lamp life with 70% lumen maintenance
•4700K color temperature and a CRI of ≥71
•High power LED light engine with a 0-10V dimmable, constant
current control driver
CANOPY / GARAGE
•LED light engine emits extremely low UV and minimal heat; it is
RoHS compliant and is mercury and lead free
•Durable, die-formed aluminum enclosure with a UV resistant,
powder coat finish; LEDs are protected by heat and impact
resistant, UV stabilized, polycarbonate lens
•Easily wired to either a recessed J-box, pendant mounted using
a standard 1/2” threaded downrod (supplied by others) or
recessed mounted (TLED-RC only)
Recessed Canopy (RC)
•ETL Listed for Wet Locations
•5 year warranty on all components
SURFACE STANDARD
SURFACE TRAPEZOID
12.00”
13.46”
2.71”
RECESSED
2.71”
3.45”
16.00”
10.5”
1.2”
2.25”
Approximate Weight: 14 lbs.
ORDERING INFORMATION
Example: TLED-C-36-VS-LG-WW
Series
# of LEDs
Input Voltage
Optics
Finish (Housing/Trim)
TLED-C = Standard Canopy
20 = 20 LEDs
VS = 120~277VAC Voltage Sensing
LG = Low Glare
WW = White/White
TLED-RC = Recessed Canopy
36 = 36 LEDs
Options (Factory Installed)
TP = Transient Protection System
CC1 = Custom Color
48 = 48 LEDs
64 = 64 LEDs
Notes
20
Accessories2 (Field Installed)
1
Consult factory for specific part number and details
PC1 = 120VAC Photocontrol
2
Order as separate line item
PC2 = 208-277VAC Photocontrol
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED-XPF
extreme performance floodlight
Elegant and Rugged
The TLED-XPF’s low-profile housing offers solid construction for a long product life and requires minimal
maintenance. The aerodynamic design features an integrated pass-through heat sink design that reduces
wind resistance and the safety risks of pole mounted lighting.
Customized High Performance
The TLED-XPF combines performance with exceptional light quality, more lumens per watt, and five
distribution choices. Choose your lumen package with wattages from 220W to 600W delivering up to 53,887
lumens and beam angles from 15° to 135°. The precision beam spread eliminates the need for glare visors
and spill control reflectors. Drivers with 0-10V dimming capability offer even more control and energy savings.
Wide Range of Applications
Instant-on lighting that requires no re-strike after a power interruption makes this a safe, energy efficient
solution for indoor and outdoor applications such as: sports arenas, swimming pools, convention centers, port
and harbor yards, colleges and universities, industrial sites and car dealerships.
TLED-XPF
Extreme Performance LED Flood Light
FEATURES
•220, 440 or 600 watt LED light engines provide 20217, 39205, or
53887 initial delivered lumens, respectively
•50,000 hour rated lamp life with 70% lumen maintenance
•5700K color temperature and a CRI of ≥70
•Precision designed aluminum housing with integrated thermal
management, integrally mounted drivers and stainless steel
hardware
Shown with optional
Heavy Duty Slipfitter (SF)
•High power LED light engine with a constant current control
driver
•Equipped with 0-10V dimming drivers for optimized control and
savings
•Features a heavy duty mounting yoke with angle indicators for
easy installation and aiming
•Optional heavy duty slip fitter also available for tenon/pole
mounting – replaces the heavy duty yoke mount
•DesignLights Consortium™ Qualified Product
IP65
•LED light engine emits extremely low UV and minimal heat; it is
RoHS compliant and is mercury and lead free
•Suitable for wet locations
•5 year warranty on all components
FLOODS
220 Watt
440 - 600 Watt
Wattage
A
B
C
D
Weight
220W
14.41"
20.00"
9.6"
3.58"
19.38 lbs
EPA
0.5
440W
23.86"
22.50"
14.53"
4.61"
44 lbs
0.9
600W
23.86"
31.93"
14.53"
4.61"
62.63 lbs
1.2
ORDERING INFORMATION
Example: TLED-XPF-600-57K-15D-VS
Series
Nomial Wattage
CCT
Optical
Input Voltage
TLED-XPF
220 = 220 Watts
50K1 = 5000K
15D = 15° Beam Angle
VS = 90~305VAC Voltage Sensing
BLANK = Heavy Duty Yoke
440 = 440 Watts
57K2 = 5700K
30D = 30° Beam Angle
3473 = 347VAC
SF4 = Heavy Duty Slipfitter
60D = 60° Beam Angle
4803 = 480VAC
600 = 600 Watts
Mounting Options
90D = 90° Beam Angle
135DS = 135° x 60° Symmetric
Notes
22
135DA = 135° x 85° Asymmetric
1
220 and 440 watt units only
2
600 watt units only
3
Mounted in weatherproof box on the back of the unit. No 0-10V dimming available with this input voltage
4
Replaces heavy duty yoke, factory installed
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED-FHB
LED Flood Light / High Bay
FEATURES
•120, 200 or 500 watt LED light engines provide 10290, 16080, or
44300 initial delivered lumens, repsectively
•50,000 hour rated lamp life with 70% lumen maintenance
•5700K standard color temperature and a CRI of ≥75, optional
3000K, 4000K and 5000K CCT available upon request
•High power LED light engine with a constant current control
driver
•LED light engine emits extremely low UV and minimal heat
•The mounting bracketry is contructed of high strength steel, the
heat dissipation fins are constructed of lightweight aluminum,
and the LED board itself is mounted directly to an array of
hollow copper tubes that lead to the aluminum heat sink
assembly for maximum heat dissipation
•The floodlight bracket has 13 positive stops every 10° so it stays
exactly where it is aimed. The high bay loop allows the TLED-FHB
to be mounted like a standard high bay
•Suitable for wet locations
IP65
•5 year warranty on all components
Approximate Weight:
18 to 29 lbs.
FLOODS
F
D
C
E
A
B
Model
A
B
C
D
E
F
TLED-FHB-120
16.125"
14.5"
10.25"
10.5"
18.375"
6.875"
TLED-FHB-200
16.125"
14.5"
10.25"
10.5"
18.375"
6.875"
TLED-FHB-500
17.625"
14.5"
12.625"
15"
19"
8"
ORDERING INFORMATION
Example: TLED-FHB-200-VS-57K-90
Series
Nominal Wattage
Input Voltage
CCT Temperature
TLED-FHB
1201 = 120 Watt
VS = 120~277VAC Voltage Sensing
57K = 5700K (std.)
Options (Factory Installed)
DIM010V = 0 - 10V Dimming
2001 = 200 Watt
30K1 = 3000K
25 = 25° Beam Angle
500 = 500 Watt
40K1 = 4000K
60 = 60° Beam Angle
50K1 = 5000K
90 = 90° Beam Angle
Notes
1
Consult factory for more details
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
23
TLED220
LED Bullet Flood Lights
FEATURES
•11 or 15 watt LED light engines provide 778 or 1140 initial
delivered lumens, respectively
•50,000 hour rated lamp life with 70% lumen maintenance
•4700K color temperature and a CRI of ≥75
•High power LED light engine with a constant current control
•LED light engine emits extremely low UV and minimal heat
•Durable, die-cast aluminum enclosure with a polyester powder
coat finish; LEDs are protected by heat and impact resistant
tempered glass lens
TLED220-15
•Rugged, adjustable 1/2” mounting arm
•Suitable for wet locations
•5 year warranty on all components
TLED220-11
8.78”
FLOODS
5.43”
3.5”
6.69”
4.02”
3.0”
Approximate Weight: 1.5 to 2 lbs.
ORDERING INFORMATION
Example: TLED220-11-VS-VG-47K
Series
Total Watts (Nominal)
Input Voltage
Finish
Color Temperature
TLED220
11 = 11 Watts
VS = 120~277VAC Voltage Sensing
BL = Black
47K = 4700K CCT Lamp Color
15 = 15 Watts
BR = Bronze
VG = Verde Green
24
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED221
Compact LED Flood Light
FEATURES
•20 watt LED light engine provides 1357 initial delivered lumens
•50,000 hour rated lamp life with 70% lumen maintenance
•4700K color temperature and a CRI of ≥67
•High power LED light engine with a constant current control
•LED light engine emits extremely low UV and minimal heat
•Durable, die-cast aluminum enclosure with a polyester powder
coat finish; LEDs are protected by heat and impact resistant
tempered glass lens
•Features a ½” threaded knuckle that can be installed on any
J-box or box cover with a ½” threaded hub
•Optional transient protection system and tamper resistant
hardware available
•Suitable for wet locations
•5 year warranty on all components
4.65”
9.125”
FLOODS
6.25”
6.125”
Approximate Weight: 5 lbs.
ORDERING INFORMATION
Example: TLED221-16-VS-TP
Series
Total LED
Input Voltage
Options (Factory Installed)
Accessories3 (Field Installed)
TLED221
16 = 16 LEDs
VS = 120~277VAC Voltage Sensing
SZXXX1 = Single Line Side Fuse (120V or 277V)
PC1 = 120VAC Photocontrol
TP = Transient Protection System
PC2 = 277VAC Photocontrol
TRH = Tamper Resistant Hardware
GRS200 = Ground Stake
CC2 = Custom Color
RL221 = Replacement Lens
Notes
1
Specify voltage
2
Consult factory for specific part number and details
3
Order as separate line item
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
25
TLED223
Low Profile LED Flood Light
FEATURES
•48 LED light engine provides 3898 initial delivered lumens
•50,000 hour rated lamp life with 70% lumen maintenance
•4700K color temperature and a CRI of ≥67
•High power LED light engine with a constant current control
driver
•LED light engine emits extremely low UV and minimal heat
Optional slipfitter mount
(SF)
•Durable, corrosion-resistant, die-cast aluminum enclosure with
a UV resistant powder coat finish, LEDs are protected by a heat
and impact resistant tempered glass lens
•Swivel bracket mount included, optional slip fitter mount or
large mounting yoke are available
•Optional 10kV, 3-leaded transient surge device protects LineGround, Line-Neutral, and Neutral-Ground in accordance with
IEEE/ANSI C62.41.2 guidelines
Optional yoke mount
(LMY223)
•Optional 0-10V dimming, transient protection system and
tamper resistant hardware available
•Suitable for wet locations
FLOODS
•5 year warranty on all components
Approximate Weight: 17.1 lbs.
ORDERING INFORMATION
Example: TLED223-48-DT-TP
Series
Number of LEDs
Input Voltage
Options (Factory Installed)
Accessories3 (Field Installed)
TLED223
48 = 48 LEDs
DT = 120/277VAC
SZXXX = Single Line Side Fuse (120V or 277V)
PC1 = 120VAC Photocontrol
TP = Transient Protection System
PC2 = 277VAC Photocontrol
DIM = 0-10V Dimming Driver
WG223 = Wire Guard
Notes
26
1
TRH = Tamper Resistant Hardware
PG223 = Polycarbonate Lens Guard
CC2 = Custom Color
GS223 = Glare Shield
RL223 = Replacement Lens
1
Specify voltage
FRM/GL223 = Frame & Glass Assembly
2
Consult factory for specific part number and details
SF = 2” Slipfitter Mount
3
Order as separate line item
LMY223 = Large Mounting Yoke
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED528A
linear led highbay lighting
THE
TLED528A
e
g
a
t
n
a
v
Ad
It’s Time For A Lighting Upgrade
This high efficiency linear LED fixture is engineered for premium performance in low bay and high bay
applications. The TLED528A 100W, 200W or 300W fixtures can replace 250W, 400W or 600W HID high bays,
while using less than half of the wattage.
Energy Efficient Advantage
Standard 0-10V dimming allows for control in various applications, while an optional Wattstopper passive
infrared occupancy sensor allows for fully adjustable high and low dimmed light levels based on motion,
adjustable time delay and cut off delay. It is controlled via the 0-10V dimming driver in the fixture and
includes a photocell to measure ambient light levels. The TLED528A Series with the TLED528-SC accessory
conforms to Title24 requirements with regards to dimming and control of light fixtures. The TLED528A Series is
DesignLights Consortium™ (DLC) qualified and meets or exceeds the efficacy requirements for various rebate
programs across the country.
TLED528A
Linear LED High Bay Lighting
FEATURES
•98, 199 or 324 watt LED light engines provide 9172, 17507, or
30790 initial delivered lumens, respectively
•Up to 50,000 hour rated lamp life with 70% lumen maintenance
•5000K color temperature with a typical CRI of ≥80
•High power LED light engine with a constant current control
•LED light engine emits extremely low UV and minimal heat
•Optical design delivers exceptional light quality, efficiency and
distribution
•Standard 0-10V dimming allows for control in various
applications
•Optional Title 24 compliant digital high/low passive infrared
sensor accessory
•Optional occupancy sensor enables simple and efficient bilevel output control
Digital High/Low Infrared Sensor
(Accessory: TLED528A-SC)
•DesignLights Consortium™ Qualified Product
•Durable, die-formed aluminum enclosure with a UV resistant,
powder coat finish; LEDs are protected by a heat and impact
resistant polycarbonate diffuser
•Mounted using the two (2) 48” lengths of chain and two (2)
fixture hooks (included standard)
•5 year warranty on all components
100 or 200 Watt:
300 Watt:
A
B CWEIGHT
12.000”
3.625”
46.000”
10 lb.
17.250"
3.625"
46.000"
18.3 lb.
ORDERING INFORMATION
Example: TLED528A-100-VS-5K
Nominal Wattage
Input Voltage
CCT
Options (Factory Installed)
TLED528A
100 = 100 Watt
VS = 120~277VAC Voltage Sensing
5K = 5000K
LCX1 = Line Cord 18AWG Blunt Cut (X = Length in Feet)
HIGH BAY
Series
200 = 200 Watt
LCX11 = Line Cord 18AWG 120VAC Straight Blade Plug (X = 3', 6' or 10' Length)
300 = 300 Watt
LCX21 = Line Cord 18AWG 120VAC Twist-Lock Plug (X = 3', 6' or 10' Length)
LCX31 = Line Cord 18AWG 277VAC Twist-Lock Plug (X = 3', 6' or 10' Length)
FW1 = 3/8” x 6’ Fixture Whip
Accessories3 (Field Installed)
TLED528A-OSS = Occupancy Sensor
TLED528A-SC = Digital High/Low Infrared Sensor
TL-FSIR-1002 = Wattstopper Digital High/Low Infrared Sensor Controller
LCX = Line Cord 18AWG Blunt Cut (X = Length in Feet)
LCX120 = Line Cord 18AWG 120VAC Straight Blade Plug (X = 3', 6' or 10' Length)
LCX120L = Line Cord 18AWG 120VAC Twist-Lock Plug (X = 3', 6' or 10' Length)
LCX277L = Line Cord 18AWG 277VAC Twist-Lock Plug (X = 3', 6' or 10' Length)
Notes
28
CTY10 = 10’ Cable Mount with Integral Y-Toggles
1
Option is not UL Listed
WG528A-4 = Field Installed Wire Guard for 100 or 200 Watt Units
2
Allows custom programming of the TLED528A-SC accessory -
WG528A-6 = Field Installed Wire Guard for 300 Watt Unit
3
contact Wattstopper for support with programming and sensor control
CL528A-4 = Field Installed Full Frame Clip-in Clear Lens for 100 or 200 Watt Units
3
Order as separate line item
CL528A-6 = Field Installed Full Frame Clip-in Clear Lens for 300 Watt Unit
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED-LVT
linear led vaportight
No Fear of Failure
Featuring a precision designed extruded aluminum housing with stainless steel hardware, impact resistant
polycarbonate lens, large silicone gaskets and a durable anodized finish, the TLED-LVT is built to take abuse.
This robust luminaire has an IP66 rating, making it totally protected against the entry of dust and jets of
water from any directions. The impact resistant design makes it the perfect fixture for the toughest locations,
whether it’s a vandal prone public stairway or a greasy industrial shop
As Smart As It Is Rugged
With efficacies as high as 97 lumens per watt, inclusion on the Designlights Consortium™ Qualified Product
List and available Title 24 compliant motion sensing and 0-10V dimming, the TLED-LVT has the brains to back
up all that brawn. Linkable up to 12 fixtures, each unit is universal and can be used in the beginning, middle
or end of the run. The TLED-LVT can be quickly and easily mounted to any horizontal or vertical surface using
the included metal mounting clips, or suspended using steel cable or pendants. The rugged yet light housing
construction even allows it to be slipped under automobiles and equipment for troubleshooting.
TLED-LVT
Linear LED Vaportight Lighting
FEATURES
•Available in a 4ft configuration with a 40 watt LED light
engine providing up to 3600 initial delivered lumens or in a 2ft
configuration with 20 watt LED light engine providing up to 1960
initial delivered lumens
•Available with 3000K, 4000K or 5000K color temperature and a
CRI of ≥80
•50,000 hour rated lamp life with 70% lumen maintenance
•High power LED light engine with a constant current control
•LED light engine emits extremely low UV and minimal heat
•Durable, extruded aluminum enclosure with stainless steel
hardware; LEDs are protected by an impact resistant
polycarbonate lens
•Can be quickly mounted to any vertical or horizontal surface
using the metal clips provided. Clips easily snap onto the
back of the luminaire and can accommodate either surface
mounted or suspended using steel cables
•Optional configurations for the TLED-LVT include a linkable
version (-L) that allows linking of up to 6 units at 120V, a motion
sensing version(-M) that has an integrated microvave sensor
and a 0-10V dimmable version (-D).
IP66
•The linkable configuration can be ordered with a closure plate
to provide a seamless look for continuous runs (TLED-LVT-CP)
•cULus Listed (standard unit), CE approved, RoHS Compliant and
IP66 rated
•DesignLights Consortium™ Qualified Product
•5 year warranty on all components
47.24”
1.74”
3.27”
2.12”
3.29”
1.00”
.79”
.13” THRU
M4X0.7 - 6H THRU
.82”
.15”
1.74”
Mounting Clip Detail
Approximate Weight: 5 lbs.
ORDERING INFORMATION
Example: TLED-LVT-4-VS-5K
Series
Nominal Length
Input Voltage
Color Temperature
TLED-LVT
2 = 2' (20 Watt)
VS = 120~277VAC Voltage Sensing
3K = 3000K CCT
L1 = Linkable
4K = 4000K CCT
M1 = Motion Sensing
5K = 5000K CCT
D1 = Dimmable 0-10VAC
4 = 4' (40 Watt)
VAPORTIGHT
Notes
30
1
Options not currently UL Listed
2
Consult factory
3
For use with linkable units
Accessories (Field Installed)
4
Order as separate line item
TLED-LVT-CP3 = Closure Plate for Continuous Run
Option
LCW(XX) = White Line Cord (XX = Length in Feet)
EX072 = 7 Year Extended Warranty
4
EX102 = 10 Year Extended Warranty
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED804
LED Vaportight Security Lighting
FEATURES
•19.4 watt LED light engine provides 670 initial delivered lumens
•50,000 hour rated lamp life with 70% lumen maintenance
•5000K color temperature and a CRI of ≥75
•High power LED light engine with a constant current control
•LED light engine emits extremely low UV and minimal heat
•Durable, die-cast aluminum enclosure with powder coat finish
•An opal glass globe reduces glare and is protected by a cast
aluminum guard
•Available in wall mount or ceiling/pendant mount styles; a
weatherproof J-box with 1/2” NPT hubs is integral to both
configurations
•Suitable for wet locations
•5 year warranty on all components
TLED804-20-VS-1B
TLED804-20-VS-1W
8.34"
6.00"
12.3"
Approximate Weight:
11.3"
Ceiling/Pendant 4lbs
Wall 5lbs
ORDERING INFORMATION
Example: TLED804-20-VS-1W
Series
Total Watts (Nominal)
Input Voltage
Mounting
TLED804
20 = 20 Watts
VS = 120~277VAC Voltage Sensing
1B = Ceiling or Pendant Mount J-box with 1/2” Hubs
1W = Wall Mount J-box with 1/2” Hubs
VAPORTIGHT
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
31
TLED-RK
linear led retro fit kit
Easily Convert Fluorescent to LED
The TLED-RK Series is a high efficiency linear LED Retrofit Kit engineered for premium performance to convert
fluorescent strip applications to LED. The easy to install kit is uniquely efficient for any fluorescent strip or vapor
tight retrofit applications. Powered by high efficiency constant current drivers and high end LED modules
that provide a remarkable uniformity, the TLED-RK Series is available in three different kits that include a
polycarbonate lens, (2’, 4’ and 8’) to facilitate ease of retrofit design. Additionally, two control options, Triac,
typically used in fluorescent applications, or 0-10V dimming, are offered to provide the ideal solution for an
application’s requirements.
TLED-RK
Linear LED Retro Fit Kit
RETRO FIT KIT
FEATURES
•Available in 2’, 4’ and 8’ strips, in 15 watts to 120 watts providing
up to 10592 lumens
•4000K color temperature and a CRI of ≥ 85
•Available with 0-10V dimming or Triac dimming driver
•Available in a strip mounting or supplied with a cover to cover
existing surface
•Polycarbonate lens specifically designed for uniform light
diffusion
•UL Listed
•DesignLights Consortium™ Qualified Product
•5 year warranty on all components
46.750
45.710
21.654
.608
.500
21.654
4.500
3.500
1.309
1.750
6X Ø.375
6X R.143
6X R.079
44.606
.313
.520
2X Ø.136
ORDERING INFORMATION
Example: TLED-RK-C-4-30-TRA-VS-4K-BL
Series
Mouting Style
Wattage/Length
Driver Type
Input Voltage
CCT Temperature
Color
TLED-RK
C = Cover
2-15 = 15 Watts, 2' Long, 1250 Lumen
TRA = Triac
VS = 120~277VAC Voltage Sensing
4K = 4000K
BL = Black
S = Strip
2-30 = 30 Watts, 2' Long, 2500 Lumen
DIM = 0-10V Dimmable
SLV = Silver
4-30 = 30 Watts, 4' Long, 3000 Lumen
4-60 = 60 Watts, 4' Long, 5296 Lumen
8-60 = 60 Watts, 8' Long, 6000 Lumen
8-120 = 120 Watts, 8' Long, 10592 Lumen
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
33
TLED612
LED Dusk to Dawn Lighting
FEATURES
•41 watt LED light engine provides 3194 lumens
•50,000 hour rated lamp life with 70% lumen maintenance
•5000K CCT color temperature and a CRI of ≥75
•High power LED light engine with a constant current control
•120~277VAC voltage sensing input
•LED light engine emits extremely low UV and minimal heat
•Includes universal mounting hardware
•Durable, corrosion-resistant, die-cast aluminum enclosure with
a UV resistant powder coat finish; LEDs are protected by a
prismatic acrylic refractor
DUSK TO DAWN
•Mounts to 1 1/2” or 1 5/8” pipe or can be lagged directly to a
surface
•Complete with photocontrol for automatic dusk to dawn
operation
•Suitable wet locations
•DesignLights Consortium™ Qualified Product
•5 year warranty on all components
6.9”
10”
13.9”
Approximate Weight: 8 lbs.
ORDERING INFORMATION
Example: TLED612-41-VS-PC1TL
Series
Input Voltage
Options (Factory Installed)
TLED612-41
VS = 120~277VAC Voltage Sensing
PC1TL = 120VAC Twist-lock Photocontrol (Standard)
Accessories1 (Field Installed)
PC2TL = 208-277VAC Single Phase Twist-lock Photocontrol
Notes
1
34
Order as separate line item
TLED612-RL = Replacement Lens
ARM602-21 = Mounting Arm
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED-B-HA
high abuse led bollard
Tough Enough For High Abuse Environments
The TLED-B-HA Series LED bollard is truly a durable, energy-efficient work horse
with a unique architectural aesthetic. Its heavy-duty design not only handles
daily abuse from things like runaway shopping carts, but it’s also built to
withstand high trafficked and high vandalism areas like commercial parking
lots, schools, retail areas, sports complexes and parks. The backbone of this
brute is a full length, 4” square galvanised steel internal support beam, providing
exceptional rigidity and strength. A solid steel compression plate securing the
support beam to the extruded aluminum body and a heavy duty mounting
base with 4 anchors completes the package.
TLED-B-HA
High Abuse LED Bollard
FEATURES
•27.5 watt, 24 LED light engine provides 1012 initial delivered
lumens
•100,000 hour rated lamp life with 70% lumen maintenance
•4700K color temperature and a CRI of ≥75
•High power LED light engine with a constant current control
•LED light engine emits extremely low UV and minimal heat; it is
RoHS compliant and is mercury and lead free
•Durable, extruded aluminum enclosure with powder coat
finish; LEDs are protected by a heat and impact resistant
polycarbonate lens
•Extruded aluminum enclosure with full length internal steel
support beam
•Light engine and textured silver internal reflector combination
is specifically designed to diffuse and distribute light where it is
needed
•Sturdy base plate is anchored with four J-bolts; bollard body is
anchored to base using tamper resistant hardware
•Suitable for wet locations
BOLLARDS
•5 year warranty on all components
44.5”
8.0”
ORDERING INFORMATION
Example: TLED-B-24-DT-SLV-HA
Series
# of LEDs
Input Voltage
Finish
Options (Factory Installed)
TLED-B
24 = 24 LEDs
DT = 120/277VAC
BL = Black
HA= High Abuse
SLV = Silver
SZXXX1 = Single Line Side Fuse (120V or 277V)
Notes
36
TP = Transient Protection System
1
Specify voltage
2
CC2 = Custom Color
Consult factory for specific part number and details
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
TLED-B
LED Bollard
FEATURES
•27.5 watt, 24 LED light engine provides 1012 initial delivered
lumens
•100,000 hour rated lamp life with 70% lumen maintenance
•4700K color temperature and a CRI of ≥75
•High power LED light engine with a constant current control
•LED light engine emits extremely low UV and minimal heat; it is
RoHS compliant and is mercury and lead free
•Durable, extruded aluminum enclosure with powder coat
finish; LEDs are protected by a heat and impact resistant
polycarbonate lens
•Light engine and textured silver internal reflector combination
is specifically designed to diffuse and distribute light where it is
needed
•Sturdy base plate is anchored with three J-bolts; bollard body is
anchored to base using tamper resistant hardware
•Suitable for wet locations
•5 year warranty on all components
BOLLARDS
39.5”
6.9”
ORDERING INFORMATION
Example: TLED-B-24-DT-SLV-TP
Series
# of LEDs
Input Voltage
Finish
Options (Factory Installed)
TLED-B
24 = 24 LEDs
DT = 120/277VAC
BL = Black
SZXXX1 = Single Line Side Fuse (120V or 277V)
SLV = Silver
TP = Transient Protection System
Notes
1
Specify voltage
2
Consult factory for specific part number and details
CC2 = Custom Color
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
37
photometrics
TLED-NFS-14-VS-5K
TLED-NFM-42-VS-5K
IES: TYPE II VERY SHORT FULL CUTOFF
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.38
40’
.1fc
.5fc
1fc
5fc
40’
30’
20’
10’
0
30’
.1fc
20’
.5fc
1fc
10’
20’
30’
40’
PHOTOMETRICS
30’
20’
10’
10’
20’
20’
20’
30’
30’
30’
40’
20’
3fc
5fc
10’
30’
40’
40’
30’
20’
10’
0
10’
38
10’
0
40’
40’
10’
0
10’
20’
30’
40’
40’
40’
.1fc
IES: TYPE II VERY SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.28
.1fc
30’
.5fc
1fc
30’
.5fc
1fc
20’
3fc
5fc
10fc
40’
20’
3fc
5fc
10fc
10’
10’
10’
10’
10’
20’
20’
20’
30’
30’
30’
40’
30’
.5fc
1fc
20’
3fc
5fc
10fc
10’
40’
20’
0
40’
30’
30’
TLED111P-90-VS-5K
40’
30’
20’
10’
0
10’
20’
30’
40’
40’
TLED106P-66-VS-5K
20’
40’
0
.1fc
10’
30’
IES: TYPE II VERY SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.28
40’
30’
20’
10’
0
10’
20’
30’
40’
40’
TLED106EXP-90-VS-5K
IES: TYPE IV VERY SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.82
.1fc
50’
IES: TYPE IV VERY SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 2.34
60’
.1fc
40’
50’
30’
.5fc
1fc
40’
20’
3fc
5fc
0
20’
20’
0
TLED112P-72-VS-5K
30’
10’
10’
.5fc
1fc
20’
5fc
10’
5fc
20’
3fc
10’
40’
IES: TYPE II VERY SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.26
40’
20’
0
30’
10’
30’
1fc
0
.1fc
0
40’
.5fc
30’
TLED110EXP-90-VS-5K
10fc
IES: TYPE II VERY SHORT FULL CUTOFF
MOUNTING HEIGHT: 20 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.36
.1fc
0
TLED110P-66-VS-5K
IES: TYPE II VERY SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.28
40’
40’
3fc
10’
3fc
TLED-NFL-79-VS-5K
IES: TYPE II VERY SHORT FULL CUTOFF
MOUNTING HEIGHT: 15 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.38
30’
.5fc
1fc
10’
20’
3fc
5fc
10’
0
20’
10’
0
30’
20’
10’
40’
10’
30’
40’
30’
20’
10’
0
10’
20’
30’
40’
20’
40’
30’
20’
10’
0
10’
20’
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
30’
40’
TLED101-13
TLED-C-64-VS-G
IES: TYPE IV SHORT NON CUTOFF
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 3.42
40’
30’
30’
20’
10’
0
5fc
10’
20’
30’
40’
30’
.5fc
1fc
20’
3fc
5fc
10’
10’
0
0
0
10’
10’
10’
20’
20’
20’
30’
30’
30’
40’
TLED-C-64-VS-P
40’
30’
20’
10’
0
10’
20’
30’
40’
40’
TLED-SC-64-VS-P
IES: TYPE V SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.80
40’
.1fc
20’
3fc
10’
IES: TYPE V SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 2.86
30’
.5fc
1fc
20’
40’
40’
.1fc
.1fc
.5fc
TLED-SC-64-VS-G
IES: TYPE V SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 2.86
40’
40’
30’
20’
10’
0
10’
20’
30’
40’
40’
TLED-C-64-VS-LG
IES: TYPE V SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.80
40’
IES: TYPE VS SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.24
40’
.1fc
30’
.1fc
.5fc
1fc
3fc
5fc
10fc
40’
30’
20’
10’
0
.5fc
1fc
3fc
5fc
10fc
20’
10’
10’
20’
30’
40’
10’
10’
20’
20’
20’
30’
30’
30’
40’
40’
30’
20’
10’
10’
20’
30’
40’
40’
0
40’
60’
80’
30’
20’
10’
0
10’
20’
30’
40’
40’
TLED220-11
IES: TYPE 3H x 3V
MOUNTING HEIGHT: 8 FEET
TILT: 45°
.1fc
40’
40’
60’
.5fc
1fc
30’
30’
5fc
10fc
20fc
20’
40fc
20’
20’
40’
20’
.1fc
.5fc
1fc
3fc
10’
10’
0
0
0
20’
10’
10’
40’
20’
20’
60’
30’
30’
80’
40’
30’
20’
10’
0
10’
20’
30’
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
40’
40’
40’
30’
20’
10’
0
PHOTOMETRICS
20’
0
80’
40’
40’
10’
10’
MOUNTING HEIGHT: 20 FEET
TILT: ZERO
40fc
3fc
5fc
10fc
10’
TLED-FHB-500-VS-57-90
5fc
10fc
20fc
20’
1fc
0
1fc
60’
20’
0
MOUNTING HEIGHT: 50 FEET
TILT: ZERO
.5fc
30’
.5fc
0
TLED-XPF-600-60D-57K
80’
30’
.1fc
10’
20’
30’
40’
40’
39
TLED220-15
TLED223-48
IES: TYPE 4H x 4V
MOUNTING HEIGHT: 8 FEET
TILT: 45°
40’
TLED528A-300
IES: 6H x 5V TYPE I VERY SHORT
MOUNTING HEIGHT: 10 FEET
TILT: 45°
HORIZONTAL SPACING CRITERIA: 1.40
40’
IES: TYPE 7H x 7V
MOUNTING HEIGHT: 20 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.24
80’
.1fc
.1fc
30’
.1fc
30’
60’
.5fc
20’
.5fc
1fc
3fc
.5fc
10’
5fc
1fc
0
40’
30’
20’
10’
0
10’
20’
30’
40’
1fc
40’
10’
5fc
10fc
20’
0
10’
20’
20’
20’
40’
30’
30’
60’
40’
TLED612-41
5fc
40’
30’
20’
10’
0
10’
20’
30’
40’
40’
TLED-LVT-4-VS-5K
IES: TYPE V VERY SHORT
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 2.22
20fc
0
3fc
10’
20’
40’
80’
60’
40’
20’
0
20’
40’
60’
80’
80’
TLED804-20
IES: TYPE 7H x 7V
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.26
40’
IES: TYPE VS VERY SHORT SEMI CUTOFF
MOUNTING HEIGHT: 8 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.72
40’
.1fc
.5fc
30’
.1fc
30’
20’
.5fc
1fc
20’
.1fc
20’
10’
3fc
5fc
10’
.5fc
10’
1fc
3fc
PHOTOMETRICS
40’
30’
20’
10’
0
10’
20’
30’
40’
0
10’
10’
10’
20’
20’
20’
30’
30’
30’
40’
40’
30’
20’
10’
0
40’
40
0
40’
40’
30’
20’
10’
0
20’
30’
40’
10’
20’
30’
40’
40’
IES: TYPE V SHORT
MOUNTING HEIGHT: 3.5 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 0.02
40’
40’
30’
30’
20’
10’
10’
0
TLED-B-HA-24
IES: TYPE V SHORT
MOUNTING HEIGHT: 3.5 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 0.02
20’
.1fc
10’
.5fc
1fc
5fc
0
10’
40’
.1fc
3fc
5fc
10fc
20’
30’
20’
1fc
30’
20’
30’
.5fc
40’
10’
TLED-B-24
.1fc
1fc
0
TLED-RK-4-60-TRA-VS-4K
IES: TYPE 7H x 7V
MOUNTING HEIGHT: 10 FEET
TILT: ZERO
HORIZONTAL SPACING CRITERIA: 1.26
30’
10’
.5fc
1fc
5fc
0
0
10’
10’
10’
20’
20’
20’
30’
30’
30’
40’
40’
30’
20’
10’
0
10’
20’
30’
40’
40’
40’
30’
20’
10’
0
10’
20’
7885 N Glen Harbor Blvd • Glendale, AZ 85307 • 800.533.3948 • barronltg.com
30’
40’
40’
we’ve been busy
see what all our brands can do for you
Honda Rider Education Center
Colton, CA
Dunkin’ Donuts Center
Providence, RI
Albuquerque International Sunport
Albuquerque, NM
Bank of America
Nationwide Locations
6th Avenue Light Rail Bridge
Denver, CO
USS Midway Museum
San Diego, CA
7885 N Glen Harbor Blvd
Glendale, Arizona 85307
800.533.3948 • Fax: 623.580.8948
barronltg.com
@barronlighting
/barronltg
MKT-CAT-TL-LED25
10840138 10/15