1 Safety light curtain SLCS90 Series

advertisement
Safety light curtain
SLCS90 Series
20
Dimensions
29.4
Height of the protected area
119.5
Housing length
10
Height of the protected area ≤ 1200 mm
5.5
Height of the protected area
119.5
Housing length
10
Height of the protected area > 1200 mm
Model Number
Electrical connection
SLCS90 Series
Transmitter unit:
Safety light curtain
Receiver unit:
1
with 2 separate fail-safe semiconductor
outputs
8 1
4
2
• Resolution 90 mm
Transmitter unit
24 V DC
Mode A/B
0 V DC
Test
Pin
1
2
3
4
5
6
7
8
• Protection field height up to 2400 mm
• Self-monitoring (type 4 according to
IEC/EN 61496-1)
• SIL3 (IEC 61508)
5
4
3
Features
6
3
Pin
1
2
3
4
7
2
Receiver unit
Restart Interlock (RI)
24 V DC
Relay Monitor (RM)
Status / Select RI-RM
OSSD1
OSSD2
0 V DC
Mode A/B
Indicators/operating means
• Temperature range -30 ... 60°C (-22
... 140 °F)
Transmitter unit
Receiver unit
• Slim design, mounting on three sides
Release date: 2015-06-01 16:33 Date of issue: 2015-06-01 202094_eng.xml
Description
The Safety light curtain SLCT consists of a
transmitter and a receiver unit. The protected
area is formed by infrared light beams transmitted from the transmitter unit to the receiver unit. The spacing between the individual
light beams determines the minimum obstruction size (90 mm) that can be reliably
detected within the entire protected area
range.
1
1 Power
green
2 Mode A/B, Status yellow
1
3
4
2
5
6
3 OSSD OFF
red
4 OSSD ON
green
5 Restart/Status
yellow
6 Mode A/B
yellow
Accessories
OMH-SLCT-06
Swivel Bracket
OMH-SLCT-01
Quick clamp and adjustment system
OMH-SLCT-02
Attachment aid for OMH-SLCT-01
OMH-SLCT-03
Mounting bracket including adjustment
OMH-SLCT-04
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Pepperl+Fuchs Group
USA: +1 330 486 0001
Germany: +49 621 776 4411
fa-info@de.pepperl-fuchs.com
www.pepperl-fuchs.com
fa-info@us.pepperl-fuchs.com
Singapore: +65 6779 9091
fa-info@sg.pepperl-fuchs.com
1
Safety light curtain
SLCS90 Series
Technical data
General specifications
Effective detection range
Light source
Light type
Protection field height
Operating mode
Optical resolution
Angle of divergence
Ambient light limit
UL File Number
0.4 ... 8 m
IRED
modulated infrared light , 850 nm
see Table 1, max. 2400 mm
Startup/restart disable, deactivateable
90 mm
5°
Not sensitive to ambient light in accordance with EN 61496-2
E215245
Functional safety related parameters
Safety Integrity Level (SIL)
Performance level (PL)
Category
Mission Time (TM)
PFHd
Type
SIL 3
PL e
Cat. 4
20 a
Depending on the protection field height; see Manual
4
Indicators/operating means
Operation indicator
Function indicator
Status indicator
Protection class
Power consumption
Input 1
Input type
Input format
Switching voltage
Input current
Input 2
Input type
Function
UB
I0
P0
24 V DC (-20%, +30%) ; Power supply with safe isolation: 24 V DC
Emitter unit:≤ 150 mA
Receiver: ≤ 150 mA (without outputs)
III , IEC 61140
Emitter unit: 5 W
Receiver: 15 W
Emitter unit test
Break contact
24 V DC
5 mA
Emitter unit, mode A/B
Beam Code A: open or 0 V
Beam Code B: 24 V DC, 5 mA
Input 3
Input type
Input format
Switching voltage
Input current
Receiver unit relay monitor
Break contact
24 V DC
5 mA
Input 4
Input type
Input format
Input current
Receiver unit, start release
Break contact
5 mA
Input 5
Input type
Receiver unit, mode A/B (see emitter unit, mode A/B)
Output
Response time
see Table 1, max. 17 ms
Output 1
Output type
Signal output
Switching voltage
Switching current
Receiver unit OSSD
PNP semiconductor , monitored for short and cross circuits
ON: UB - 2 V; OFF: < 1 V
ON: max. 0.1 A; OFF: < 5 µA
Output 2
Output type
Signal output
Receiver signal output start readiness
PNP-semiconductor, short-circuit protected, 0.1A
Ambient conditions
Ambient temperature
Storage temperature
Relative humidity
-30 ... 60 °C (-22 ... 140 °F)
-30 ... 70 °C (-22 ... 158 °F)
max. 95 %, not condensing
Mechanical specifications
Housing length L
Degree of protection
Connection
Material
Housing
Optical face
Mass
2
see table 2
IP65 , For indoor use only
Emitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m
extruded aluminum section , gold anodized
Plastic pane , Transparent polycarbonate
see table 2
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Pepperl+Fuchs Group
USA: +1 330 486 0001
Germany: +49 621 776 4411
fa-info@de.pepperl-fuchs.com
www.pepperl-fuchs.com
fa-info@us.pepperl-fuchs.com
Singapore: +65 6779 9091
fa-info@sg.pepperl-fuchs.com
Release date: 2015-06-01 16:33 Date of issue: 2015-06-01 202094_eng.xml
Electrical specifications
Operating voltage
No-load supply current
green: Power on
Green: OSSD ON , Red: OSSD OFF
Emitter unit: LED yellow: Mode, test or error
Receiver: LED yellow: Start readiness, function reserve or error
Safety light curtain
SLCS90 Series
Compliance with standards and directives
Directive conformity
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
Standard conformity
Functional safety
Standards
Approvals and certificates
CE conformity
UL approval
CCC approval
TÜV approval
EN ISO 13849-1:2008 ; EN 61496-1:2013
EN 61000-6-3:2007+A1:2010 ; EN 61000-6-4:2007+A1:2011
IEC 61508:2010 part 1-4
IEC 61496-2:2013
CE
cULus Listed
CCC approval / marking not required for products rated ≤36 V
TÜV
Additional information
Table 1 - Response time:
Height of the protected area
[mm]
Response time
[ms]
300
8
600
10
900
11
1200
12
1500
14
1800
15
2100
16
2400
17
Table 2 - Total length and weight:
Height of the protected area
[mm]
Total length of
transmitter/receiver unit
[mm]
Weight of
transmitter/receiver unit
[g]
300
419
250
600
719
430
900
1019
600
1200
1319
760
1500
1625
940
1800
1925
1100
2100
2225
1270
2400
2525
1440
System accessories
Release date: 2015-06-01 16:33 Date of issue: 2015-06-01 202094_eng.xml
Mounting aid
OMH-SLCT-01
OMH-SLCT-02
OMH-SLCT-03
OMH-SLCT-04
Press & Release quick clamp and adjustment system
Attachment aid for Press &Release quick clamp and adjustment system
Mounting aid with fixed bearing (long) for mounting or used to connect 2 light gids
Mounting aid with loose bearing (narrow)
Other accessories
TR 14/30/50/60
AA SLCT-01
Test rod for 14 mm, 30 mm, 50 mm or 60 mm resolution
Alignment aid (box level to snapped into the lateral grooves), Angle error: < 1°
Connecting cable
V1-G-BK2M-PUR-U:
V1-G-BK5M-PUR-U:
V1-G-BK10M-PUR-U:
V19-G-BK2M-PUR-U:
V19-G-BK5M-PUR-U:
V19-G-BK10M-PUR-U:
Cable, M12, 4-pin, 2 m, UL-connector
Cable, M12, 4-pin, 5 m, UL-connector
Cable, M12, 4-pin, 10 m, UL-connector
Cable, M12, 8-pin, 2 m, UL-connector
Cable, M12, 8-pin, 5 m, UL-connector
Cable, M12, 8-pin, 10 m, UL-connector
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Pepperl+Fuchs Group
USA: +1 330 486 0001
Germany: +49 621 776 4411
fa-info@de.pepperl-fuchs.com
www.pepperl-fuchs.com
fa-info@us.pepperl-fuchs.com
Singapore: +65 6779 9091
fa-info@sg.pepperl-fuchs.com
3
Download