STR-T3-WALL Clear T3 Strobe for EWIS Systems

advertisement
DATA SHEET
STR-T3-WALL
Clear T3 Strobe for EWIS Systems
Features:






Flashes to T3 pattern
Meets Australian Standards
Brightness settings via jumper
Fast response xenon tube
Low current consumption
Fire retardant plastic
Description:
The above multi-candela strobe has a high output xenon strobe capable of visually signaling evacuation using the
ISO 8201 “T3” temporal pattern, as required by AS1670.4-2004 and AS 1670.1-2004. These strobes produce white
light with an intensity that is link-selectable. Refer Table for Candela Output.
The unit is a wall mount type with a housing constructed from flame retardant thermoplastic with the word “FIRE”
written in red letters.
The strobes contain an internal diode, allowing reverse polarity supervision without the need for additional
components. They also feature a circuit design that ensures a consistent flash output and controlled inrush current.
I2000 – Connection
The strobes can be driven by an I-2000 Evacuation System using a STRM9502 module (PA0697) with software
version 1.70 or later. Connect the positive strobe terminal to the B terminal of the STRM9502 and the negative to
the A terminal of the STRM9502. DIP Switch 5 on the STRM9502 must be switch off, 6, 7 and 8 must be switched
on.
** Note Any DIP switch changes will only take effect once the system is powered down then powered back
up**
Specifications:
Operating Voltage:
Light Output:
Typical RMS Current1 (mA) for:
Connections :
Overall Dimensions:
Base Dimensions:
Wording Dimensions:
Ambient Temperature:
Relative Humidity :
*Nominal setting
16V to 33Vdc
15cd
30cd
75cd
41
63 *
123
0.85 to 3.31mm²
103mm H x 127mm W x 74mm D
32mm H x 127 mm W x 74mm D
12.5mm H x 53mm W
0ºC to +50ºC
10% to 93% (non-condensing)
110cd
164
Approvals:
AS1670.4-2004
AS 1670.1-2004
G:\Documents\Datasheets\Word Datasheets\STR-T3-WALL.Doc
RevDate: 17 September 2015
NSW (Head Office)
18-20 Brookhollow Ave
Baulkham Hills NSW 2153
Tel 02 8850 2888
Fax 02 8850 2999
www.firesense.com.au
VIC (Branch Office)
4/297 Ingles St
Port Melbourne VIC 3207
Tel 03 9646 4557
Fax 03 9646 4558
QLD (Branch Office)
2/225 Queensport Rd Nth
Murarrie QLD 4172
Tel 07 3890 8842
Fax 07 3890 8894
Download