1-800-KEYLESS
keyless.com
PRODUCT OVERVIEW
FALL 2007
Over the past 25 years, Essex Electronics has researched, developed and manufactured a unique Keypad utilizing a
proprietary piezoelectric switch technology. The result is a virtually indestructible Keypad unsurpassed in its' ability to
tolerate any environment (heat, rain, snow or ice - up to 3/8"). Tested over 1 Billion cycles, Essex Keypads consistently work
more than 100 times longer than traditional membrane, conductive rubber and mechanical keypads.
Essex Keypads have become the choice of security professionals worldwide. Rugged stainless steel construction and circuit
assembly encapsulation ensure performance in even the most extreme environment. From residential to commercial to
industrial applications, Essex offers a complete line of single and dual technology Access Control Readers, Keyless Entry®
Systems and Accessories. Professional Grade Access Control proudly designed and assembled in the USA and backed by a
Limited Lifetime Warranty.
Piezoelectric Switches
Essex Piezoelectric Switches are heavy duty, timed electronic switches. They feature Essex
solid-state Piezoelectric Switch technology and field selectable illumination status. Brilliant red,
vibrant green or no illumination can be selected to show relay ON or relay OFF status.
• Power Requirements: 12-24VDC*
• Two Outputs: 1 N/O, 1 N/C (2A 30VDC Resistive, ½A 125 VAC)
• Adjustable Output Time: 1 to 40 seconds
• Dimensions: Single gang 4 ½” x 2 ¾” x 1 ¼” Narrow 4 ½” x 1 ¾” x 1 ¼”
• Current Draw: 120mA max
Item #
1JYX4
1JYX5
2HNK3
2HNK1
Description
U.S. Single Gang Switch
U.S. Single Gang Switch
U.S. Single Gang Switch
Narrow Switch
Faceplate Graphics
No Graphics
“PUSH TO EXIT”
“EMERGENCY EXIT”
“EXIT”
1JYX5
2HNK1
*Important Note: Due to the electrical design of Essex
Piezoelectric Switches, they will not operate with
<11VDC. Backup power (i.e. UPS) is required for
operation during a power interruption. Consult with
local officials prior to installing electronic buttons for
egress applications.
Keypad + Card Access Control Readers
PiezoProx® & iSMART™ are professional grade, dual technology access control readers. Compatible with
most OEM access control panels, PiezoProx combines an Essex Keypad with HID 125kHz Proximity.
iSMART offers an enhanced level of security by integrating HID iCLASS® 13.56MHz smart card technology.
• Power Requirements: 5 or 12VDC
Card Reader Options
• Read Range: Up to 5” (PiezoProx), up to 3” (iSMART)
• Operating Environment: -40º C to +70 º C, 100% Relative Humidity
• Mounting: Single gang switchbox or surface mount
• Dimensions: 7 ¼” x 3 ⅝” x 1 ½”
1JYX7
• Current Draw: 80mA max
Description
Item #
PiezoProx® – HID Proximity w/26 Bit Wiegand Keypad, Stainless Bezel
1JYX6
iSMART™ – HID iCLASS w/26 Bit Wiegand Keypad, Stainless Bezel
1JYX7
LGPOV.1007.R2
®
PiezoProx is a registered trademark of Essex Electronics, Inc.
iSMART™ is a trademark of Essex Electronics, Inc.
iCLASS® is a registered trademark of HID Corporation
Keypad Access Control
Keypad Programmable • Request to Exit • Latching • Anti-Tailgating • Tamper Alarm • Programmable Output Time • Non Volatile Memory
SKE-6
Self Contained, Access Control Keypad
• 6 Codes
• 12 – 24VAC/DC In/Out
• 1 SPDT Relay (2 amp at 24V max)
• 2 Auxiliary O.C. Outputs (¼A Grounding)
Item #
Description
1JYV6
SKE-6, Black Illuminated Overlay
1JYV5
SKE-6, Stainless Overlay
SKE-34 / SKE-26
•
•
•
•
Multiple User, Self Contained, Access Control Keypad
Item #
Description
500 Codes
2HNE8
SKE-34S, 12 Pad 3x4 Stainless Bezel
12 – 24VDC In/Out
2HNF2
SKE-34K, 12 Pad 3x4 Black Bezel
1 SPDT Relay (2 amp at 24V max)
2 Auxiliary O.C. Outputs (¼A Grounding)
2HNF5
SKE-26S, Thinline 2x6 Stainless Overlay
2HNF8
KE-265
SKE-26I, Thinline 2x6 Black Illuminated Overlay
Secure, Stand Alone, Keypad Access Control System
• 6 Codes
• 12 – 24VAC/DC In/Out
• 2 SPDT Relays (6 amp, 120VAC)
• 5 Pad Stainless Keypad
K1
Item #
1JYV7
2HNH6
2HNH9
2HNJ3
Description
KE-265 System w/ 5 Pad Stainless
KP-5S, 5 Pad Stainless Keypad for 1JYV7
WC-15, 15’ Wiring Cable for 1JYV7
CM-265, Control Module for 1JYV7
All in One, Keypad Access Control or OEM Compatible Reader (26 Bit Wiegand, Serial ASCII,… )
Configure Keypad as OEM Compatible Reader Item #
Description
or Keyless Entry System
1JYX2
K1, 12 Pad 3x4 Stainless Bezel
• 500 Codes
1JYX3
K1, Thinline 2x6 Stainless Overlay
• 3 Programmable Outputs
1JYV8
K1, 12 Pad 3x4 Stainless + ERM-3
• Optional Encoded Relay Module (ERM-3)
with 3 SPDT Relays (6 amp, 120 VAC) and 1JYV9
K1, Thinline 2x6 Stainless + ERM-3
PC Programming Software
Keypad + Card Access Control
K – PROX
Secure Keypad + HID Proximity Access Control System
•
•
•
•
•
500 Codes (Pin and/or Card)
Item #
Description
3 Programmable Outputs
1JYX1
K-Prox,12 Pad 3x4 Stainless w/Prox + ERM-3
Keypad + HID 125 kHz Proximity
Keypad and/or PC Programmable
Encoded Relay Module (ERM-3) with 3 SPDT Relays (6 amp, 120VAC) and PC Programming Software
Stainless Spy Proof Housing
For areas with low ambient lighting, the
Illuminated Spy Proof Housing provides
Keypad illumination and serves to limit the
view of an unwelcome onlooker.
• Dimensions: 5⅝ ” x 3⅝ “ x 1” to 2¼”
• Stainless Steel Construction
• Long Lasting LED’s
Stainless Back Box
The Stainless Back Box is designed for any Essex 12 Pad
3x4 Keypad or single gang Piezoelectric Switch. It simplifies
mounting to uneven surfaces and tilts the keypad
or piezoelectric switch15º for wheelchair height
installation.
• Dimensions: 5 ⅜” x 3 ⅝“ x ½” to 1¾”
• Conduit knockout
Item #
Description
Item #
Description
2HNJ8
Illuminated Spy Proof Housing – 12 Volt
2HNJ6
Single Gang Stainless Back Box
© 2007 Essex Electronics, Inc. All rights reserved
®
Keyless Entry is a registered trademark of Essex Electronics, Inc.