Providence® Large with HID Optic – PROL TYPE • Horizontal reflector Type 2, 3, 4, & 5 • IP65 rating • Powder coat finish in 13 standard colors with a polymer primer sealer PROL (HID) 1. LUMINAIRE 2. REFLECTOR 3. LAMP/BALLAST 4. COLOR 5. OPTIONS 6. MOUNTING PROL 4. COLOR 1. LUMINAIRE PROL Providence large housing scale WH Arctic White BL Black BLT Matte Black DGN Dark Green DB Dark Bronze WDB Weathered Bronze MDB Bronze Metallic 2. REFLECTOR HID (Flat tempered clear glass lens) Horizontal Reflector H2 (Type2) H3 (Type3 H4 (Type4) H5 (Type5) PULSE START METAL HALIDE (120/208/240/277 volt ballast) Mogul base, ED-17 lamp 150PSMH Mogul base, ED-28 lamp 320PSMH 250PSMH 400PSMH 350PSMH HIGH PRESSURE SODIUM (120/208/240/277 volt ballast) Mogul base, ED-23 1/2 lamp 150HPS Mogul base, ED-18 lamp 200HPS250HPS 400HPS All ballasts are factory wired for 277 volts, unless specified. Lamps not included, VBU Verde Blue CRT Corten MAL Matte Aluminum MG Medium Grey AGN Antique Green LG Light Grey RAL Premium Color CUSTOM * * Contact Factory 5.OPTIONS 3. LAMP/BALLAST SPECIFICATIONS SPK (Decorative spike) PFN (Finial painted brass) BPS (Struts painted brass) PCA-T (Rotatable photocell) HSS (House side shield, not available for Type 5. Factory installed) LDL (Lightly diffused lens. Frosted, flat tempered glass lens has a lightly diffused finish to minimize the lamp and reflector brightness.) QRS (Restrike controller and T-4 mini-can socket will light following power outage until HID reaches full brightness. (Lamp wattage not to exceed ballast wattage). QL (Socket for T-4 mini-can lamp, field wired to a separate circuit. (Lamp wattage not to exceed ballast wattage). Must be field wired to a separate 120 volt circuit.) PT4 (Post top fitter for a 4"/100mm O.D. pole) 6. MOUNTING – Must choose one WALL MOUNT WMA55 WMA56 POLE MOUNT SLA1 TRA55 SLA1-2 TRA56 PM2 PIER MOUNT PM1 REFLECTOR MODELS – REFLECTOR/LAMP The upper lamp housing shall be die cast aluminum. The internal reflector module is sealed from the outer housing with a one piece, memory retentive, molded silicone gasket. The tempered glass lens shall be sealed to the housing with a silicone gasket. One stainless steel latch shall release the door to allow access to the lamp. The reflector module shall be composed of faceted, specular and semi specular anodized aluminum panels rigidly attached in a die cast aluminum housing. The reflector shall be removed without tools by releasing a pair of steel latches. The reflector tray shall be rotatable on 90° centers for orienting the light distribution. All HID sockets are pulse rated porcelain. REFLECTOR MODELS – BALLAST The lower ballast housing shall be cast aluminum. The tool-less ballast access for servicing is accomplished by a quarter turn motion of the top cover. The ballast shall be mounted on a prewired tray with a quick disconnect plug attached to the underside of the cover. HID ballasts are high power factor, rated for -30°C starting. Ballasts are wired at the factory for 277 volts, unless specified. INSTALLATION & MOUNTING The large (PROL) Providence shall be factory supplied as a complete, prewired assembly. The PROL fitter shall slip over a 5"/127 mm open top pole and be secured and leveled with stainless steel set screws. PM3 See next page Visit www.aal.net for Arms, Poles & Accessories Specification Guide JOB TYPE ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 2.15 NOTES | 1 | Photometric Report Wednesday, July 11, 2012 CATALOG NUMBER: PROL-H5-400MH-LDL Providence Large with HID Optic – PROL ® FILENAME: PROL-H5-400MH-LDL.IES TYPE Photometric Report IESNA:LM-63-2002 [TEST] 22679 CATALOG NUMBER: PROL-H5-400MH-LDL [ISSUEDATE] 8-21-07 FILENAME: PROL-H5-400MH-LDL.IES FINISH [MANUFAC] ARCHITECTURAL AREA DIMENSIONS LIGHTING [LUMCAT] PROL-H5-400MH-LDL IESNA:LM-63-2002 Fixture finish consists of a five stage pretreatment regimen [LUMINAIRE] PROVIDENCE WITH SPECULAR Weight: 29lbs. EPA: 1.30 [TEST] 22679 POST TOP LUMINAIRE with a polymer primer sealer, oven [MORE] dry off, FACETED and top coated REFLECTOR WITH FROSTED FLAT GLASS LENS [ISSUEDATE] 8-21-07 [LAMPCAT] MH400/U/ED28 [MANUFAC] ARCHITECTURAL AREA LIGHTING 18.7 in / 475 mm 23.6"/599mm with a thermoset super TGIC polyester powder coat [LUMCAT]400 PROL-H5-400MH-LDL [LAMP] ONE VENTURE WATT MH LAMP ED28 LAMP finish. The finish shall meet the AAMA 605.2 performance [LUMINAIRE] PROVIDENCE POST TOP LUMINAIRE WITH SPECULAR [MORE] LUMENS=36000 [MORE] specification which includes passing a 3000 400 hour salt FACETED REFLECTOR WITH FROSTED FLAT GLASS LENS [BALLAST] MH spray test for corrosion resistance. Wednesday, July 11, 2012 [LAMPCAT] MH400/U/ED28 [LAMP] ONE VENTURE 400 WATT MH LAMP ED28 LAMP SUMMARY DATA [MORE] LUMENS=36000 [BALLAST] 400 MH EFFICIENCY (Total): 50.3 % CERTIFICATION EFFICIENCY (Down / Up): DATA 50.3 % / 0.0 % SUMMARY The fixture shall be listed with ETL for outdoor, (Street wet location EFFICIENCY / House): 25.9 % / 24.4 % EStd. FFICIENCY (Total): 50.3 SHORT % ROADWAYCSA CLASSIFICATION: TYPE III, VERY use. Conforms to the UL1598 and Canadian EFFICIENCY (Down / Up): CUTOFF CLASSIFICATION: CUTOFF 50.3 % / 0.0 % C22.2 no.250 standard. IP65. 25.9 % / 24.4 % LUMENS/LAMP:EFFICIENCY (Street / House): 36000 Weight: 47 LBS ROADWAY CLASSIFICATION: TYPE III, VERY SHORT NO. OF LAMPS:CUTOFF CLASSIFICATION: 1 CUTOFF 31.5 in / 800 mm 38.95"/989mm LUMINOUS OPENING: CIRCULAR WARRANTY / TERMS AND CONDITIONS OF SALE LUMENS/LAMP: 36000 Diameter: 2.00 (Feet) 1 NO. OF LAMPS: Download: INPUT WATTS: LUMINOUS OPENING: 465 CIRCULAR http://www.hubbelllighting.com/resources/warranty/ Diameter: 2.00 (Feet) INPUT WATTS: 465 EPA: 1.33 AAL reserves the right to change product specifications without notice. PROL H5 400MH LDL WATTAGE: 465 LUMEN OUTPUT: 18098 ISO-ILLUMINANCE DIAGRAM (fc) (fc) ISO-ILLUMINANCE DIAGRAM B4 U0 G2 0.01 0.01 0.02 FORWARD LIGHT LUMEN 0.02 0.05 o 0.05 3.8% 1352 FL30 o 0.2 14.9%5371 FM60 0.2 0.5 6.7% 2398 FH80 o 1. 0.5 2. 1. 0.6%199 FVH90 o 5. 2. BACK LIGHT BL30 o BM60 o BH80 o BVH90 o 4.0% 14.3% 5.7% 0.3% 1456 5159 2046 115 UPLIGHT UL100 o UH180 o 0% 0% 0 0 5. 0.1 0.1 EFFICACY: 77.4 Mounting Mounting Height Height --------------------10 10 15 15 20 20 25 25 30 35 30 40 35 45 40 50 45 50 Multiplier Multiplier --------------------------4.000 4.000 1.778 1.778 1.000 1.000 0.640 0.640 0.444 0.327 0.444 0.250 0.327 0.198 0.250 0.160 0.198 0.160 UPLIGHT 0% DOWNLIGHT 100% + = Point of max candela Mounting Height =HEIGHT 20 Feet. Each box represents one mounting height. 20' MOUNTING + = Point of max candela Mounting Height = 20 Feet. Each box represents one mounting height. Reported data calculated from manufacturer's data file, based on IESNA recommended methods. Photometric Viewer v3.4 Reported data calculated from manufacturer's data file, based on IESNA recommended methods. Photometric Viewer v3.4 IES files can be found at www.aal.net ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 2.15 | 2 |