SBS STEEL BELT SYSTEMS S.r.l.
Stab e uffici.: Via E. Mattei, 3 - 21040 Venegono Inf. (VA)
Tel: ++39 0331 864841 Fax ++39 0331 864959
e-mail: info@steelbeltsystems.it
Internet: http://www.steelbeltsystems.it
Sede legale: Via dei Gracchi, 14 - 20146 Milano
C.F. - P. IVA: IT04642110961
Cooling conveyor for powder coatings - toners.
SBS is leader in the production of cooling conveyors for powder coatings and toners.
In the production plant, the cooling conveyor represents one of the most important parts of the productive process.
Evenness of calendering, cooling efficiency and evenness of the produced flakes represent the most important factors in a cooling conveyor for powder coatings.
Cooled nip rolls
Extruder
Rotating breaker
Flakes
Water spraying system
These features must however be supported by a high reliability, easiness of use and of cleaning, together with a well studied positioning of the various safety
devices, which must allow the personnel to carry out all operations in absolute safety.
Thanks to the experience coming from the very high number of installed machines, SBS is able to offer a product having all above mentioned features.
Here below please find the range of “standard” cooling conveyors for powder coating
Powder coatings coolers - data sheet
CC distance
3000
3500
4000
5000
5670
7000
Cooling length
2300
2700
3200
4000
5000
6300
300x3000
120 kg/h
400x3500
200 kg/h
400x5000
600x4000
300 kg/h
400 kg/h
600x5000
550 kg/h
800x5000
700 kg/h
800x5670
900 kg/h
1000x5670
1500 kg/h
1500x7000
COOLER
MODEL
2500 kg/h
2
Powder coatings coolers - available options
Water closed
Plate heat
loop circuit
exchanger
Covering tunnel (stainless
steel) with extractor fan
Laboratory calender
Laboratory cooler conveyor
Independent elect.
control board
Heater for
condensation removal
Stainless steel
frame
Crusher
Minibreak
Industrial unit assembly
3
Industrial unit assemblies
NIP ROLLS DETAILS
1000X∅240 mm Squeezing rolls chromium plated
1500X∅400 mm Squeezing rolls chromium plated
Standard pneumatic system rolls opening-closing
4
BREAKER DETAILS
Previous standard design with removable combs
New “easy clean” standard closed
New “easy clean” standard open
New “easy clean” standard details
5
Standard breaker design
Flaked product
Examples of flake’s dimensions (average)
mm
%
1
3,2
4,05
22,05
25
14,13
4,87
3,35
2,95
> 16
16 – 14
14 – 13,2
13,2 – 12,5
12,5 – 11,2
11,2 -10
10 – 8
8–5
5–4
Minibreak design
Flaked product
Mm
4 -2,8
2,8 - 2
2-1
1-0,5
%
1,46
1,24
1
1,2
14,5
< 0,5
Examples of flake’s dimensions (average)
mm
> 10
10 - 8
8–5
5–4
4 -2,8
2,8 - 2
2-1
1-0,5
< 0,5
%
0
0,27
10,62
22,44
29,55
17,12
0,8
5,4
13,8
6
Examples of installations
7