Dimension A
F18
G, FL Mount
19”
22-15/16” 34-15/16” 46-15/16”
F24
NF Mount
18”
21-15/16” 33-15/16” 45-15/16”
FINA
F36
F48
Project Name
Date
Catalog Number
Type
Daylight
Sensor
CONSTRUCTION Extruded alumimum housing
is rolled and welded for seamless finish with 1/4” trim.
LED Direct Architectural Round /
14” Pendant Mount
Aluminum top
cover conceals
components. Highly reflective die-formed white painted steel reflector.
MR16 all electrical
Corners
ELECTRICAL Electronic, 120 to 277 volt input and 36V output. 0-10 volt dimming. Must specify 1D for dimming in the
4-1/2”
circuiting options of the part number.
4-1/2”
(114.3mm)
LED White LED configurations tested in accordance with IES LM-79.
Diodes tested in accordance with IES LM-80.
R9≥20, 2700K = CRI≥90; 3000K, 3500K and 4000K = CRI≥82. Minimum lifetime greater than 60,000 hours.
LENS White virgin acrylic lens with
matte
finish, removable for LED access. Select from satine, concave or convex
Dimension A
14”
(355.6mm)
design. Lens available in 3 positions:
flush, regressed, or dropped. Specify in the shielding section of part number.
Staggered
Staggered
Lamps
Lampsavailable. Fixture mounts directly to a standard junction box. Refer to installation
MOUNTING
Pendant pipe mount
Regress Convex (CR)
Regress Satine (AR)
Regress Concave
(VR)
instructions for appropriate ceiling detail. Canopies and pendants are white unless otherwise specified.
F18
F24
F36
F48
Dimension A
18”
21-15/16” 33-15/16” 45-15/16” FINISH Standard powder-coat textured white, metallic silver, textured black or bronze painted finish, consult factory
for chip of standard paint finishes. Pendants and canopies painted white unless specified differently in the options
Staggered
Convex (C)
Satine (A)
ConcaveStaggered
(V)
section of the part number. Contact
Lamps
Lamps factory for additional custom color and finish options.
WARRANTY Fina offered with a 5-year limited warranty. Covers LED, driver and fixture.
LABELS UL and cUL Listed, approved for dry/damp location unless otherwise noted.
Drop Convex (CL)
Drop Satine (AL)
Drop Concave (VL)
Year LED
Warranty
Year LED
Warranty
Staggered
Lamps
LFL
Regress Convex (CR)
Convertible
LED
Regress Satine (AR)
LED
LFL
Convertible
Convertible
LFL
LED
LED
Convertible
Regress Concave (VR)
LFL
Staggered
Lamps
Convex (C)
Dimension A
Drop Convex (CL)
4-1/2”
Satine (A)
Concave (V)
14” (355.6mm)
Drop Satine (AL)
Drop Concave (VL)
F18
F24
F36
F48
Year LED
Warranty
LDimension
UMINA
E C I F I C33-15/16”
A T I O N45-15/16”
A IRE
18” S P 21-15/16”
Sample Catalog #: F14-A-35-PP18JB-120-1C-W
F14-
__-
____-
HOUSING
SHIELDING
COLOR/LUMENS
__________-Convertible__Convertible
LFL
1
Dimension A
__-
____
FINISH
OPTIONS
LED
LED
MOUNTING
VOLTAGE
F14- Fina 14”
diameter
4-1/2”
4-1/2”
(114.3mm)
LFL
CIRCUITING
120- 120 V
277- 277 V
UNV- UNV
(120-277)
27K Color Temperature Lumen Options3/8”
2727K, 837 lumens (14.6 watts) (9.5mm)
27HO- 27K, 1,341 lumens (26.1 watts)
30K Color Temperature Lumen Options
3030K, 1,017 lumens (14.6 watts)
30HO- 30K, 1,631 lumens (26.1 watts)
4-1/2”
(114.3mm)
W- Matte White
S- Metallic Silver5
BL- Textured Black5
BR- Bronze5
CC- Custom Color5
1C- Single Circuit
14” (355.6mm)
1D- Single Circuit Dimming
1E- Single Circuit Emergency4
35K Color Temperature Lumen Options
F18
F24
F36
F48
3535K, 1,063 lumens (14.6 watts)
A- Satine Lens
Dimension
33-15/16”
45-15/16”
35HO35K, 1,705
lumens (26.1 watts)
ARRegressASatine18”
Lens 21-15/16”
AL- Lowered Satine Lens
40K Color Temperature Lumen Options
V- Concave Lens
4040K, 1,090 lumens (14.6 watts)
VL- Lowered Concave Lens
40HO- 40K, 1,748 lumens (26.1 watts)
C- Convex Lens
RGB LED Options2
CR- Regress Convex Lens
RGBX- RGB LED with DMX Module
CL- Lowered Convex Lens
Custom Output
CL_____- Specify color temp. and lumens (i.e. CL351300)
CW____- Specify color temp. and wattage (i.e. CW4019.5)
Pendant Pipe (One drop all sizes)3
PP__JB- Pendant Pipe to J-Box
(specify O.A.L., 12”, 18” or 24”)
PP__ST- Pendant Pipe to Structure
(specify O.A.L., 12”, 18” or 24”)
GLR- Fusing
AM- Antimicrobial Paint
CC-P- Pendant Custom Color5
CC-C- Canopy Custom Color5
PS__JB- Pendant Swivel to J-Box
(specify O.A.L., 12”, 18” or 24”)
PS__ST- Pendant Swivel to Structure
(specify O.A.L., 12”, 18” or 24”)
(Specify lumens/watts between standard offering listed on back
page. Lumens are specified per color temp.)
1
Lumen numbers reflect delivered lumens. 2Osram/Sylvania Color Changing RGB LED and components are for accent or decorative lighting and does not provide room illumination. See back page for more information. 3Must specify pendant
length, i.e. PP12JB. Consult factory for additional pendant lengths. 4Entire fixture will be on emergency circuit. 5If canopy or pendant are to match fixture housing, must specify in options section with CC-P or CC-C. If not specified, pendants
and canopy will be standard matte white.
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting®
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
Exposed Flanged: Metal Pan or Millwork: Drywall, Flangeless:
Specify FL in part # Specify NF in part #
Specify SF in part #
PHOTOMETRY
387
FINA 14” SUSPENDED PP
619
290
464
194
310
97
155
Test#: ITL82417-RevB
Test#: ITL82418-RevB
Part #: F14A-40
Part #: F14A-40HO
AC3
AH4
Lumens
per watt:
Lumens
pertowatt:
(3 Aircraft
Cables 75
Angled to Fixture) (4 Aircraft Cables
with Hub
Fixture)67
Total Delivered Lumens: 1090
Total Delivered Lumens: 1748
Must specify 48” or 120” adjustable aircraft cable length (i.e, AC348JB)
*Fina photometry reflects efficacy improvements since initial test.
MOUNTING DETAILS
CANOPY INSTALLATION
STANDARD CANOPY
FLUSH CANOPY
The canopy can be installed either
below the ceiling plane or semirecessed into the ceiling for a flush
mount installation. No specification
required. Standard kit can be installed
either way. (Flush canopy installation is not
available for fixtures installed below a grid
rail.)
PP
(Pendant Pipe)
Must specify overall pendant length of 12”,
18” or 24” (i.e, PP18JB)
R G3/8”B
COLOR CHANGING LED
APPLICATION: RGB LED is ideal for accent or decorative lighting and uses a Red, Green and Blue LED multi chip for color mixing.
TECHNICAL: RGB LED flexible linear strips are installed on the perimeter of the fixture housing and wired to a DMX interface
that leaves factory with 3 bare wires for field connection. (DMX+, DMX-, and DMX GND.)
S
ELECTRICAL: 30w max wattage electronic driver. Wattage output is 22.0w.
LABELS: UL and cUL Listed, approved for dry/damp location unless otherwise noted.
ORDERING INFORMATION: Specify RGBX in the color/lumens section of the part number.
Sample Catalog #: F14-A-RGBX-PP18JB-120-1C-W.
RGB with DMX: Provides digital compatibility for integrating RGB color with 3 channel dimming and control with a DMX
system or controller using DMX-512 or DMX-512A protocol.
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568
www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting®
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.