Free tenders for Transformer by Government Of Bihar-3896131500
fcgkj LVsV ikoj ¼gksfYMax½ dEiuh fyfeVsM] iVuk
fufonk lwpuk la[;k
174@ih0vkj0@ch0,l0ih0
¼gks0½ da0 fy0@2012
fuEukafdr dk;ksZa dh eqgjcan fufonk vkeaf=r dh tkrh gSA
dk;ksZa dk fooj.k
izkDdfyr jkf'k
vxz/ku dh jkf'k
ifjek.k foi= dk
ewY; ¼ugha ykSVkus
;ksX;½
:0-10]000-00
dk;Z iwjk djus dh
vof/k
3(nine) months
1- Construction of Transformer repairs
:0 26165394
:0- 523300
workshop Complex at Motihari
fufonk tek djus dk le; 15-00 cts rd fnukad 08-01-2013 ,oa fufonk dk rduhdh Hkkx [kqyus dk le; mlh fnu 15-30 ctsA
fufonknkrk dh ik=rk] fufonk ls lacaf/kr dkxtkr bR;kfn fc0 ,l0 ih0 ¼gks0½ da0 fy0] ds csolkbZV http://bseb.bih.nic.in ls MkmuyksM fd, tk ldrs gSaA MkmuyksM fd, x, fufonk
dkxtkr ds lkFk ik=rk lacaf/kr dkxtkr] vxz/ku dh jkf'k ,oa ifjek.k foi= ds ewY; ds :i esa dS'k@fMekUM MªkQ~V tks ojh; izca/kd] ¼fo0 ,oa ys0½ ¼lfpoky;½] fcgkj LVsV ikoj ¼gksfYMax½ dEiuh
fyfeVsM] iVuk dks Hkqxrs; gks rduhdh ,oa okf.kT;dh Hkkx&1 ds lkFk layXu djuk vfuok;Z gS vU;Fkk fufonk;sa iw.kZr% jn~n le>h tk;sxhA fufonk foi= v/kksgLrk{kjh ds dk;kZy; ls fufonk nsus dh
frfFk ls ,d fnu iwoZ rd vFkkZr fnukad 07-01-2013 rd izkIr fd;k tk ldrk gSA
eq[; vfHk;ark ¼vlSfud½
Hkz"Vkpkj lacaf/kr f'kdk;r gsrq fc0 ,l0 ih0 ¼gks0½ da0 fy0] foftysal eksckbZy gsYi ykbZu% ua0& 9431821485] 0612&2504969miHkksDrk fctyh fcy lgt olq/kk dsUnz vFkok http://bsebbills.org ek/;e ls Hkh tek dj ldrs gSaA
Free tenders for Transformer by Government Of Bihar-3896131500
BIHAR STATE POWER (HOLDING) POWER Co. Ltd.
1. N.I.T. No.
174/PR/BSPHCL/12
2. Name of Work
Construction of Transformer repairing
workshop complex at Motihari.
3. Estimated Cost
Rs. 2,61,65,394.00
4. Cost of B.O.Q.
Rs 10,000.00
5. Earnest Money
Rs. 5,23,300.00
6. Date & time of receiving tender 08.01.2013 up to 03.00 PM.
7. Date & time of opening tender
08.01.2012 at 03.30 PM.
8. Completion time
03 Months.
Issued by
M.R. NO.
Issued to
dated.
Free tenders for Transformer by Government Of Bihar-3896131500
INTROUCTION OF BID
1.1
Invitation to Bid
Bids are invited by Bihar State Power( Holding) Company .Ltd Vidyut
Bhawan, Jawaharlal Nehru Marg, Patna- 800021 for investigation,
planning, design including all civil construction works and supply, erection
and commissioning of required Plant & Machinary and other electrical
allied works for T R W at different locations in Bihar on turnkey basis.
1.2.1. Bihar State Power (Holding) Co. Ltd is expanding the repairing capacity of
defective transformer by establishing T R W at different locations in
Bihar.
1.2.2. Bihar State Power (Holding) Co. Ltd (B.S.P.H.C.L.) called Owner is
intending to appoint Agency/Firm for carrying out the afore-said work.
1.2.3. E.E (Civil) of concerned Area office of South Bihar Distribution Company
Ltd. And North Bihar Distribution Company Ltd. may be consulted for
site visit
1.2.4. The intention of these bid is to select a Agency/Firm for carrying out the
afore-said work in accordance with the specifications as detailed out in the
various sections of this tender document and as per Indian Standard
Specification. It is not intended to specify and outline herein all the minute
details of the services to be rendered by the Agency/Firm. All items which
are required for successful completion and operation of the TRW as
intended in this document are deemed to be included in the scope of the
contract whether specifically mentioned or not.
1.3 Scope of Work. The scope of the present tender for establishing and
construction of TRW consists of two parts viz Part- A &Part- B:Part A: All Civil works including Construction of T R W buildings including
W/S & S/I. and allied other civil works as desired by the Engineer –in-charge.
Part B: planning, design, supply , erection,commissioning and testing of
required Electrical and mechanical plant and machinary industrial wiring, campuc
lighting etc. complete in all respect to make the workshop operative.
Free tenders for Transformer by Government Of Bihar-3896131500
GENERAL CONDITIONS OF CONTRACT
(To be attached with Technical & Commercial Part)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
All relevant ISS & PWD and Irrigation specifications will be followed
during the course of work.
The Contractors will be responsible for providing medical facilities,
accommodation, drinking water and other amenities to the worker
employed by them to the site as per requirement of the labour at their own
cost.
The quantities of work given in the bill of quantities may vary. No claim
will be entertained for increase or decrease in quantities or elimination of
items tendered.
The contractor will have to maintain at site a bound inspection book. Any
extra item ordered by the Engineer in charge and the day to day instruction
regarding the work shall be entered in that book.
No claim for idle labour under any circumstance will be entertained by the
department.
The contractor or his authorised agent shall always be present at site while
the work is in progress and at the time of measurement.
Payment will be made in running account system for continuous works.
The bill will be submitted by the Contractor once in a month for substantial
quantity of work done. The B S P (H) C L is not bound to make monthly
payment for works considerably lower than warranted by the proportionate
time.
All existing labour laws and regulations shall have to be followed by the
contractor. The tenderers have to submit an attested copy of labour license
under contract labour (Regulation & abolition) Act'1970 along with the
tender.
Conditional tender may not be acceptable in the B S P( H) C L.
All prevalent rules including minimum wages act revised from time to time
will be binding upon the contractor and all the relevant labour laws shall
have to be observed by them.
The contractor will have to maintain necessary records regarding payment
of minimum wages of the labourers and exhibit before the officials of
labour department and B S P (H) C L as and when so required by them.
In case of any dispute, the decision of the competent authority
Superintending Engineer (Civil) or the higher authority as the case may be
will be final and binding.
The work will be carried out in protected area. Hence all the rules and
regulations of the department which are enforced from time to time shall
have to be followed.
Before submission of the tender, the tenderers shall acquaint themselves
with the site conditions so that they may get an idea of the working
conditions and incorporate all exigencies and cost effect in the quoted rates.
Free tenders for Transformer by Government Of Bihar-3896131500
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
i)
The contractor will have to co-ordinate their work with other agencies
working in the area and no claim for delay in work due to idle labour on
any account will be entertained.
Tenderer must deposit the required Earnest Money as mentioned in the
tender notice in the shape of Bank Draft. Drawn in the favour of Sr.
Manager, F & A (Sectt.) Bihar State Power (Holding) Co. Ltd., Patna or in
cash with the Sr. Manager, F & A (Sectt.), B.S.P.H.C.L., Patna. No
adjustment of pending dues lying with the department in any shape will be
made towards earnest money. Earnest money is not acceptable by Cheque,
Tender without the requisite Earnest Money will not be considered valid
and hence rejected.
Experience certificates for similar type of works done previously must
accompany the tender.
The agency/ or reject any or all the tender without assigning any reasons
thereof. competent authority reserves the right to distribute the work to one
or more than one
Permanent address for correspondence should be furnished in tender
documents otherwise the tender will not be considered.
Rate may be quoted in percentage above or below, the estimated rates or in
words and figures both.
Excess departmental materials issued by the department shall be returned to
the department by the agency otherwise double cost of materials shall be
recovered from the agency.
The contract shall be eventually drawn on F-2 Form General and special
conditions of contract shall be read with the terms and conditions laid
down in F2 Form, but for anything mentioned to the contrary in F2 Form,
provision laid down in General Conditions of contract /special conditions
of contract shall prevail.
A tenderer shall (on a separate sheet) give a brief description of works
previously executed by him. After the tender has been opened, a tenderer
may be required to submit details of such works along with manner of
their execution and/or any other information that will satisfy the
B.S.P.H.C.L,Patna that the contractor has adequate competency to execute
the work required to be carried on under these specifications. Tenderers not
meeting qualifying criteria of NIT shall be excluded from consideration for
the award of the work.
Tender should satisfy that the statements as required along with the tender
documents are correct and complete in every respect. Any inaccuracy
detected later shall vitiate the contract and make the contractor liable to be
proceeded against.
FORCE MAJUERS.
If during the continuance of the contract either of the parties or both are
prevented from fulfilling the obligation under the contract due to force
measure such as fire, act of nature/ war, rids, political disturbance, military
Free tenders for Transformer by Government Of Bihar-3896131500
operation or such other circumstances beyond the control of the
party/parties, the date of fulfilment of their obligations shall be extended in
proportion to the time during which such circumstances prevail.
ii)
The party affected by the force measures as detailed above shall
immediately notify in writing the other party of the beginning of such
circumstances as also the cessation thereof.
iii) In case of force measures as detailed above the parties shall immediately
meet for consultation and shall work out the measures to be taken.
29.
In Super session of the clause in F-2 contract in respect of arbitration the
civil court of Patna shall alone have exclusive jurisdiction to decide any
differences/ disputes claims for and against B.S.P.H.C.L or the contractor
arising out of this contract.
30. Construction materials which will be used in the work like tarfelt, bricks,
sand stone chips,
Paints, quality and colour of distemper/snowcem and quality of wood will
be approved by the Executive Engineer (Civil) I/C of the work and only
approved quality is to be used in the work by the Contractor.
26.
Monthly progress report of the work will be submitted by the contractor to
the Chief Engineer (Civil) B.S.P.H.C.L,.Patna for the works being
executed directly under control of Chief Engineer (Civil).
Free tenders for Transformer by Government Of Bihar-3896131500
SPECIAL CONDITIONS OF CONTRTACT
(To be attached with Technical & Commercial Part)
1. SECURITY MONEY.
The contractor shall have to deposit 10% of the contract value as security
deposit, 5% being the initial security, which shall have to be furnished in cash
or in shape of Bank Draft at the time of execution of Agreement within
indicated time in letter of intent or work order. In the case of successful
tenderer, the amount of earnest money will be adjusted towards 5% security
deposit. The balance 5% shall be recovered from the running account bill.
2. IDLE CHARGES.
No charges for idle man, machine, plant and equipment will be allowed to the
agency for some reason or the other beyond the control of the department.
3. TAXES
The rates should be quoted including all taxes on all commodities. Sales Tax as
levied by Govt. of Bihar shall be paid by the contractor which will be
reimbursed after assessment by sales Tax Dept and production of proof of Tax
payment..
4.DEFECT LIABILITY PERIOD AND REFUND OF SECURITY:Deffect liability period will be counted from the date of completion of work.
This period will be 6 months; thereafter security will be refunded after getting
a certificate from the Engineer-in-Charge that the work has been done as per
drawing and specification.
5. The Contractor will have to make arrangement for water both for drinking
purpose of the labourer and for construction purpose both at their own cost.
However, if the work site is located at any convenient location where water
supply system of the Board is already operative and if under such precondition water is arranged by the Board at any one point, water charges shall
be recoverable @ 0.80% percent of gross bill value of work done.
6. EXTRA WORK
Any extra work done by the Contractor will be paid as per schedule of rates
prevalent in that area or if no such rates exists in the schedule, the rates to be
mutually agreed upon before taking up the extra works as per analysis by the
E/I. Before taking the work of extra , it must be got approved by the
competent authority to avoid subsequent dispute and delay in decision.
7. DATE OF COMMENCEMENT.
The date of commencement of work will be considered from the date of work
order given to the contractor in writing.
8. VARIATION IN QUANTITIES OF WORK.
Free tenders for Transformer by Government Of Bihar-3896131500
Board does not take guarantee of work under each of schedule. The quantity
indicated in the Bill of quantity for work may increase or decrease by
30%(Thirty Percent) for which no extra rate or claim will be entertained by the
Board.
9. LIQUIDATED DAMAGE.
For any delay in completion of work liquidated damages will be charged as per
relevant clause of F2 Agreement i,e ½ % penalty of contract value per day
limited to Maximum 10% of the contract value.
10. MONTHLY PAYMENT.
The Contractor shall submit monthly bill for work done to the E/I and the
department will make monthly payment to the contractor after, checking of bill
provided the fund is available. No interests will be paid in case of delay in any
payment shall entitle the Contractor for consequential extension of time
without any extra financial burden to the BSP(H) c0.Ltd.
11. AVAILABLITY OF MATERIALS;All materials related to this work i.e. cement, M.S. Rod, M.S. Angle, M.S. Flat
& Barbed wire etc will be supplied by the Contractor of approved quality by
the site In charge. In case of cement, it should be C.C.I. or Raymond or Satna
cement Factory of Birla Jute Mill works or ACC bearing approved quality and
in case of steel materials it should be from SAIL and TISCO or IISCO or
Vishakhapatnam Steel plant.
12.
MINIMUM ACCEPTABLE RATE:The minimum rates offered by the tenderer below 15 %( fifteen percent) of estimated cost
shall not be accepted.
13.
LIST OF INCOMPLETE WORKS;-
The tenderer shall have to furnish list of unfinished pending work of
B.S.P.H.C.L/other department with tender in prescribed Performa. (Enclosed)
Free tenders for Transformer by Government Of Bihar-3896131500
ADDITIONAL INSTRUCTIONS TO THE BIDDERS
(To be attached with Technical & Commercial Part)
(Over & above the existing instruction)
The tender notice and tender document/specifications BOQ shall
remain available at website www.bseb.bih.nic.in during the tender notice period
and the same can be downloaded and used as tender document for submitting the
tenders, However the cost of tender forms mentioned in the tender notice has also
to be paid in the form of DD issued in favour of Sr. Manager of F & A (Sectt.)
B.S.P .(H ).Co. Ltd. payable at Patna to be enclosed with the tender form while
submitting the tender.
In case the tender submitted in downloaded form is not accompanied
with valid D.D towards the cost of tender document/ specifications/ BOQ, the
tender will be summarily rejected.
The tenderers, who will be found indulging in changing/ adding or
deleting the contents of the downloaded tender document/specification/BOQ will
be liable to face necessary action including banning, suspension from business
dealing etc.
2. Tenderers should watch the website for Corrigendum Addendum to the
NIT/ Tender Documents and there will not be any separate correspondence
about the same.
3. Tenderers should submit in original downloaded documents duly signed
and stamped on each page. Any photocopy or typed copy of the
downloaded document will be treated as invalid.
4. Demand draft furnished towards the cost of tender document/
specifications/ BOQ in case of downloaded documents shall be verified
before bid evaluation.
Free tenders for Transformer by Government Of Bihar-3896131500
Eligibility Criteria.
To attract participation of reputed & capable firms with proper
track record, experience etc the following is required:Average Annual financial turn over during the last 3 years, ending 31st
1.
March of the previous financial year should be at least 30% of the estimated
cost.
2.
Experience of having successfully completed similar works during last 7
years ending last day of month previous to the one in which N.I.T's are invited
should be either of the following:(a)
Three similar completed works costing not less than the amount
equal to 40% of the estimated cost,
or
(b)
Two similar completed works costing not less than amount equal
to 50% of the estimated cost,
or
(c)
One similar completed work costing not less than the amount
equal to 80% of the estimated cost.
ELECTRICAL MACHINERIES, TESTING & HOISTING
ARRANGMENT, FABRICATION WIRING AND LIGHTING ETC.
(A) Design, Engineering & Supply of Electrical machineries, testing equipments
hoisting arrangement etc., their installation, testing & commissioning in different
newly constructed TRWs under NORTH/SOUTH BIHAR POWER
DISTRIBUTION COMPANY LTD on turn key basis.
1. PLACE OF TRW WHERE ONLY DEFECTIVE DISTRIBUTION
TRANSFORMERS ARE TO BE REPAIRED
Sl. No.
Place of new TRW
Remarks
1
2
3
4
5
6
Motihari
Harnaut
Supal
Barun
Forbesganj
Buxer
Only Defective Dist.
Transformers to be repaired.
Free tenders for Transformer by Government Of Bihar-3896131500
7
8
9
10
Chapra
Bhabua(Kaimur)
Kalyanpur(Samastipur)
Banka(Bhagalpur)
2. PLACE OF TRW WHERE DEFECTIVE DISTRIBUTION AND
POWER TRANSFORMERS BOTH ARE TO BE REPAIRED
Sl. No.
Place of new TRW
Remarks
1
2
3
Phulwarisharif
Begusarai Zero Mile
Munger
Defective Dist. & Power
both type of transformers to
be repaired.
3. GENERAL REPORT
In order to meet the increasing demand of repaired transformer and
easy transportation for lesser distance and early replacement of burnt
/defectivr Dist. Transformer/Power Transformer setting up additional
transformer repair workshops at different locations as mentioned above is
essential. In the initial stage approximately 100 nos. of distribution
transformers will be repaired every month in each workshop which will
meet the requirement of replacement of burnt/defective transformer to the
local areas. It will reduce the transportation cost and meet the urgent
requirement to the respective areas.
4. SCOPE OF WORK
i.
The works to be governed by this contract shall cover up designing,
engineering, supply, transportation to destination, in safe custody at site,
installation, testing & commissioning of all the equipments.
ii.
Providing design data, engineering drawing, technical data, leaflets,
operational mannual etc. of the equipments supplied. All Drawings,
Operation Manuals etc supplied will be the property of the Bihar State
Power (Holding) Company Limited for internal use.
5. INSPECTION
All the materials to be supplied are subject to inspection of materials
as per relevant IS by authorised representative of Chief Project Manager,
Technical Services, Patna/ RITES Ltd.
Free tenders for Transformer by Government Of Bihar-3896131500
The contractor should provide all facilities for inspection without
any extra cost at manufacturer’s workshop from where materials are to be
supplied.
6. QUALITY ASSURANCE of MATERIALS
All the equipments, materials fittings and components will be
subject to quality control programme of the manufacturer. The materials
shall also be inspected by authorised representative of Chief Project
Manager or RITES Ltd.
7. DESPATCH CLEARANCE
Materials shall be despatched only after approval of Test /Inspection
Report and Despatch Clearance issued by Chief Project Manager,
Technical Services.
1.4
Bidding Schedule....
Issuing Date
1.5
Bid Conditions.
On 08.01.2013 up to 3.00 P.M
Up to 07.01.2013
1.5.1 BSPHCL does not bind itself to accept the lowest or any of the bids.
BSPHCL also reserves the right to reject any or all bids without assigning
any reasons there of any time.
1.5.2. BSPHCL reserves the right to change, modify, add, alter any of the
conditions mentioned in this bidding document at its sole discretion.
1.6
The authority reserves the right to distribute the work amongst the
tenderers.
1.6.1. No tenderer will be awarded more than two Packages of TRW work.
1.6.2 Prebid query:- a. Prebid query may be made to cecivilbseb@gmail.com
or can be sent by post so that it reaches within 10-days of the publication
of N.I.T.
b. Prebid clarification meeting will be held five days prior of opening of
the technical part of the tender.
1.6.1. The basic consideration and the essence of the contract shall be the strict
adherence to the time schedule for performing the work. The Owner’s
Free tenders for Transformer by Government Of Bihar-3896131500
requirements of completion schedule for the works are mentioned in the
corresponding Schedul-1 attached to this bid document.
1.7
Bid Offer Prices.
1.7.1 The Bidder shall indicate on the appropriate price Schedule (Schedule- 2)
attached to these documents, bid prices for the afore-said work separately
for Part & A part B as required in the bid specification.
1.9
Submission of Bids.
1.9.1 The proposal comprising of two parts viz. of technical and price bid shall
be submitted to Chief Engineer (Civil) Bihar State Power (Holding) Co.
Ltd Vidyut Bhawan, Jawaharlal Nehru Marg, Patna 800021 .
1.9.2. The envelope superscribed as “TECHNICAL PROPOSAL”(Cover-1)
should include the description of the firm/ agency, the firm’s general
experience in the field of assignment, the qualification and competency of
the personnel proposed for the assignment and the proposed work plan
methodology, approach, etc. This envelope (Technical Proposal) should
not contain any price/cost information whatsoever.
1.9.3. The second envelope superscribed as “PRICE PART” (Cover-2) should
contain the detailed price offer for Part A & Part B Separately and this
envelope should be sealed and initialled at two places across the seal.
1.9.4. Both the sealed envelope (containing Technical and Price proposals Cover
1 & 2) should be placed in one sealed cover super scribing thereon “ BID FOR
CONSRTUCTION OF T R W” with the name of location.
Free tenders for Transformer by Government Of Bihar-3896131500
BIHAR STATE POWER (Holding) Co. Ltd.
TENDER PROFORMA
(Technical & Comm.-Part)
1.
Name & full address of the tenderer:(a) Correspondence address:(b) Permanent address:-
2.
Name of tenderer:(Signing to tender documents)
3.
4.
5.
6.
Name of the work of which tender submitted:Tender Notice No. with due date:Time of completion:Validity of the Tender
(It should be till finalisation of tender)
7.
Amount of earnest money deposited with
receipt No. & date/ Bank draft No and date of issue:-
8.
Character certificate granted by D.M./S.P.
-
YES/NO
9.
Up to date Income Tax Clearance certificate.
-
YES/NO
-
YES/NO
10.
Labour License certificate
(Up to date renewal validity).
11
Experience certificate & performance report.
-
YES/NO
12.
Evidence of financial soundness.
-
YES/NO
13.
Lists of Tolls & plants, if any such as truck
-
YES/NO
and power of attorney to sign the tender document.-
YES/NO
tractors,sheet foot rollers, vibrator, mixture etc.
to be submitted along with Technical and
Commercial Part-I if required in work.
14.
Photo copy of registration and deed of the firm
N.B.:- i) The tender from new entrants must be accompanied with character certificate of D.M./S.P.,Sales Tax
Clearance, Income Tax Clearance certificate and Labour license Certificate, failing which tender may not be
considered. Tenderer shall give a brief description (on a separate sheet of works properly executed by him.
After the tender has been opened, any tenderer may require to submit details particular of such works along
with manner of their execution and any other information that will satisfy the B.S.P.H.C.L., Patna that the
contractor had adequate competency to execute the work required to be carried on under these specification
and nature of work.
(ii) Tenderer should satisfy that the statements as required along with tender documents are correct & complete
in all respect.
A.E.(C)
E.E.(Civil)
S.E.(Civil)
Chief Engineer(C)
N.B.- This document is computer generated and does not require to be signed.
Signature of Tenderer.
Free tenders for Transformer by Government Of Bihar-3896131500
(Technical & Comm.-Part)
laosnd ds viw.kZ dk;ksZa dh fooj.kh
12-
dk;Z dk uke
laosnd dk uke%&
iwjk iRrk%&
dk;kZns'k la0 ,oa foHkkx
frfFk@,djkjukek uke
la0 ,oa frfFk
dk dk;Z lekfIr vfHk;qfDr
dh frfFk
eSa fu"BkiwoZd ?kks"k.kk djrk gwWa fd mi;qZDr izo`f"V;ka esjh vf/kDdre tkudkjh ds vuqlkj lgh
gh A xyr vFkok Hkzked lwpukvksa ds fy, eSa iw.kZr% mRrjnk;h gksmxkaA
laosnd dk uke ,oa gLrk{kj&
frfFk&
Free tenders for Transformer by Government Of Bihar-3896131500
Sechedule-1
DECLEARATION FOR TIME SCHEDULE
Part-A
Three months
Part-B....Three months................
We confirm that we shall adhere to the above time schedule and complete our
responsibility to suit the above program.
Signature…………………………………………..
Name………………………………………………..
Designation……………………………………….
Date…………………………………………………..
Seal of Agency/ Firm.
Free tenders for Transformer by Government Of Bihar-3896131500
Part II
Sechedule-2
(PRICE-PART)
(To be enclosed with BOQ)
fcgkj LVsV ikoj ¼gksfYMax½ dEiuh fyfeVsM
fufonknkrk bls Hkyh Hkkfr Hkjs
¼;g ifjek.k foi= dk vax gS½
eSaus layXu ifjek.k&foi= 'krZ vkfn dks i<+k le>k gS rFkk eSa fuekZ.k dk;Z vkSj leL;kvksa dh
tkudkjh j[krk gwWaA ifjek.k foi= ds mfYyf[kr en fo'ks"k fooj.k] nj rFkk bdkbZ dks ;Fkkor~ ls
viuh nj dks ifjek.k foi= esa mfYyf[kr lHkh njksa ij lkewfgd rkSj ij laikfnr djus gsrq gekjh
lgefr gSA
1¼d½ de nj ;kfu ?kVkdj ¼vad esa½
¼'kCnksa esa½
izfr'kr ij dke djuk Lohdkj djrk gwWA
¼[k½ c<+kdj ;kfu mij ¼vad esa½
¼'kCnksa esa½
izfr'kr ij dke djuk Lohdkj djrk gwWA c<+kdj fn;k x;k izfr'kr foHkkx }kjk
fuf'pr nj @njksa ij vkiwfrZ lkefxz;ksa ij ns; ugha gksxkA
¼x½ izkDdfyr nj ij ;fn lger gks rks mi;qZDr ¼d ½ ,oa ¼[k½ ij X fpUg vafdr djrs gq,
¼x½ ds lkeus gkWa fy[ksaA
2fufonknkrk dk gLrk{kj &
3-
frfFk%&
4-
fufonknkrk dk iwjk uke%&
5-
vLFkk;h ¼i=kpkj dk½ iwjk iRrk%&
6-
LFkk;h ¼?kj dk½ iwjk iRrk%&
xkWao%&
xzke iapk;r%&
Fkkuk%&
Mkd?kj&
ftyk&
fVIi.kh ¼d½]¼[k½ ,oa ¼x½ esa ls ,d dks gh Hkjsa vU; dkV nsaA rhuksa Hkjuk ;k dkV&dwV dj
lansgizn cukuk fufonk dks iw.kZ vLohd`fr dh vksj ys tk ldrk gSA
d`i;k uhps dh lwpuk,a Hkjsa%&
¼d½ de ls de fdrus le; esa iwjk djsaxs&
¼[k½ fdrus :i;s vxz/ku ds :i esa tek fd;k x;k gSA¼jlhn vo'; layXu djsa½
¼x½ bl rjg ds dk;Z dk vuqHko gSA
¼?k½ fdl rjg vki bl dk;Z ls izHkkfor gSa &
¼M+½ lHkh vk;dj vkius pqdk fn;k gS& gkWa@ ugh
fufonknkrk dk gLrk{kj
mijksDr fufonk dk ifjek.k foi= Jh--------------------------------------------------------------------------------------- ds
gkFk esa fcdzh fd;kA
fcdzsrk dk gLrk{kjA
Free tenders for Transformer by Government Of Bihar-3896131500
PRICE-PART(PART-II)
Bill of quantity of work - construction of Transformer Repair workshop building
including W/S & S/I & allied civil works at Motihari.
2.
Construction of shed (50’0”X30’0”)- 3 units.
Bill of quantity for one unit.
1.
2.
3.
4.
5.
Items of work
Quantity.
Rate (Rs)
Boring, Providing and installing
cast in situ single under reamed
300mm dia plies of specified dia
and length below pile cap in
cement concrete piles with mix
1:1.5:3 (1cement:1.5 coarse sand
:3 graded stone aggregate 20mm
nominal size) to carry a safe
working load not less than
specified excluding the cost of
steel reinforcement but including
the cost of boring with bentonite
solution and the length of the pile
to be embedded in pile cap etc. all
complete as per direction of E/I.
Extra over item 1 for Boring,
providing and installing cast in
situ double under reamed piles,
instead of single under ream of
specified dia and length( only the
quantity of extra bulbs are to be
paid) as per direction of E/I.
Earth
work in excavation
foundation trenches or drains (not
exceeding 1.5 m in width or 10
sqm on plan) including dressing
of sides and ramming of bottoms,
lift up to 1.5 m including getting
out the excavated soil and
disposal of surplus excavated soil
as per direction of E/I. within a
lead of 50 M.
Providing designation 100A one
brick flat soling joints filled with
local sand including
cost of
watering, taxes, royalty all
complete
as
per
building
specification and direction of E/I.
156.09 M
421.80
32
562.50
Five hundred sixty Each.
two & paise fifty
only.
15.36
160.60
One hundred sixty M3
& paise sixty only.
152.20
170.20
One
hundred / M2
seventy & paise
twenty only.
272.20
Two
Providing designation 100A one 50.00
Rate in words (Rs)/ Unit
unit
Four hundred twenty M
one & paise eighty
only.
hundred
M2
Free tenders for Transformer by Government Of Bihar-3896131500
6.
6A
7.
8.
brick on edge soling joints filled
with local sand including cost of
watering, taxes royalty all
complete as per direction of E/I.
Providing and laying in position
specified grade of reinforced
cement concrete excluding the
cost of centring ,shuttering
finishing and reinforcement all
work up to plinth as per direction
of E/I.
(a) Providing cap, cap beam 12.46
&band at plinth up to plinth.
(1:1.5:3)
(b)RCC floor(1:1.5:3)
21.95
seventy two & paise
twenty only.
3689.10
3689.10
Three thousand six M3
hundred eighty nine
& paise ten only
Three thousand six M3
hundred eighty nine
& paise ten only
M3
Providing and laying in position 8.46
specified grade of reinforced
cement concrete M20 in stiffener
excluding the cost of centring
,shuttering
finishing
and
reinforcement all work up to five
level as per direction of E/I.
Reinforced cement concrete work 5.73
in beams , suspended floor, roofs
having slope up to 15, landing,
balconies, shelves, chajjas, lintels,
bands, plain window sills, stair
cases and spiral stair cases,
column up to floor five level
excluding cost of centring,
shuttering, and reinforcement
with M20 grade, stone aggregate
20mm nominal size) as per
direction of E/I.
Centring and shuttering including
strutting propping etc. and
removal of form of as per
direction of E/I.
3737.50
3963.77
Three thousand nine
hundred sixty three
& paise seventy
seven only.
(A) Foundation.
40.32
127.66
(B) R.C.C. cap beam
31.55
173.20
(C) Band of plinth level
7.88
173.20
(D)Stiffener (Column)
80.00
260.60
One hundred twenty M2
seven & paise sixty
six only.
One hundred seventy M2
three & paise twenty
only.
One hundred seventy M2
three & paise twenty
only.
Two hundred sixty & M2
M3
Free tenders for Transformer by Government Of Bihar-3896131500
9.
10.
11.
12.
15.
16.
(E) R.C.C. lintel & band at eave 35.16
level
173.20
(F) Providing R.C.C. chajja
331.20
14.70
paise sixty only.
One hundred seventy M2
three & paise twenty
only.
Three hundred thirty M2
one & paise twenty
only.
Reinforcement for R.C.C. work
including straightening, cutting
bending, placing in position and
binding all complete as per
direction of E/I.
A)Mild steel-6mm dia.
492.00
67.40
(b) TMTC-500-8mm rod
760.00
72.40
(c) TMTC-500-10mm rod
553.00
72.40
d) TMTC-500-12mm rod
2091.00
71.30
e) TMTC-500-16mm Rod
1362.00
71.80
Brick work with bricks of class
designation 100 A in foundation
and plinth in cement mortar (1:6)
as per direction of E/I.
Brick work with bricks of class
designation 100 A in super
structure in cement mortar (1:6)
as per direction of E/I.
Supplying and filling in plinth
local sand and under floor
including, watering ramming
consolidating
and
dressing
complete as per direction of E/I.
Providing 150mm wide brick
drain in cement mortar (1:6) with
av. 150mm clear depth and
125mm apron concrete (1:4:8)
over one brick designation 100A
flat soling in proper grade and
slope at the base, the drain duly
plastered
in CM.(1:3) with
punning over exposed surface all
complete as per direction of E/I.
11.05
3035.40
39.05
3377.10
102.37
180.20
51.82
378.00
Three
hundred M
seventy eight only.
234.10
Two hundred thirty M2
four & paise ten
only.
Providing average 150mm thick 144.05
dry rammed khoa beaten to 112
mm (compacted with) made of
well burnt or jhama brick
Sixty seven & paise
forty only.
Seventy two & paise
forty only.
Seventy two & paise
forty only.
Seventy one & paise
thirty only.
Seventy one & paise
eighty only.
Three thousand thirty
five & paise forty
only.
kg
Kg
Kg
Kg
Kg
M3
Three thousand three M3
hundred
seventy
seven & paise ten
only.
One hundred eighty M3
& paise twenty only.
Free tenders for Transformer by Government Of Bihar-3896131500
17.
18.
19.
20.
21.
22.
23.
including ramming property till
compacted thickness is achieved,
curing and carriage of water with
all leads making, proper slope and
blinding the top with cement
mortar (1:10) all complete as per
direction of E/I.
52 mm thick cement concrete 144.05
flooring with metallic concrete
hardener topping under layer 40
mm thick cement concrete 1:2:4
(1cement :2 coarse sand:4 graded
stone aggregate 20mm nominal
size) and top layer 12mm thick
metallic
concrete
hardener
consisting of mix 1:2 (1cement
hardener mix :2 stone aggregate 6
mm nominal size) by volume @ 2
litre per 50 of cement or as per
manufacture’s specification this
includes cost of cement slurry,
etc. but excluding the cost of
nosing of steps etc. complete as
per direction of E/I.
Plastering 12mm thick (1:6) as 497.00
per direction of E/I.
Providing 12mm C.P. (1:3) with 46.47
punning as per direction of E/I.
Cement plaster 18 mm thick in
skirting (up to 30 cm ht.) with
cement mortar 1:3 finished with a
floating coat of neat cement. as
per direction of E/I.
Steel works with hot finished
seamless type tubes in built up
tubular P E B trusses as per
direction of E/I.
Providing P P G I coloured 0.5
mm thick corrugated sheets
roofing and fixing with G.I. J or L
hooks bolts and nuts 8mm dia G.I.
plain and bitumen washer
complete excluding the cost of
purlin,
rafter
and
trusses
corrugated sheet as per direction
of E/I.
Providing and fixing ridges and
hips in P P G I sheet roofingclose fitting adjustable ridges- as
per direction of E/I.
297.70
Two hundred ninety M2
seven
&
paise
seventy only.
72.10
Seventy two & paise M2
ten only.
One
hundred M2
seventeen & paise
sixty only.
One hundred seventy M2
seven & paise two
only.
117.60
14.86
177.02
1560.00
90.00
Ninety only.
172.87
288.20
Two hundred eighty M2
eight & paise twenty
only.
15.75
315.80
Three
hundred M
fifteen
&
paise
eighty only.
Kg
Free tenders for Transformer by Government Of Bihar-3896131500
24.
25.
26.
27.
28.
29.
Extra for providing and fixing
wind ties of 40X6mm flat iron
section as per direction of E/I.
Providing and fixing steel glazed
doo, windows and ventilator of
standard rolled steel sections,
joints mitred and welded with
15X3mm lugs 10 cm long with
steel lugs embedded in cement
concrete blocks 15X10X10cm of
1:3:6 (1cement:3 coarse sand :6
graded stone aggregate 20mm
nominal size) or with wooden
plugs and screws or rawl plugs
and screws or with fixing clips
and special metal- sash putty of
approved
make
complete
including applying a priming coat
of
approved
steel
primer
excluding the cost of metal
beading and other fitting except
necessary hinges or pivots as
required as per direction of E/I.
Providing and fixing M.S. grill of
requirement pattern in frames of
window etc. with M.S. flats
square or round bar etc. all
complete as per direction of E/I.
Supplying, and fixing rolling
shutter of approved make, made
of required size of 80 x 1.25 mm
M.S. laths with 1.25 mm thick top
inter locked together through their
entire length and jointed together
at the end by end locks mounted
on specially designed pipe shaft
with brackets, side guides and
arrangements for inside and
outside locking with push and pull
operation complete including the
cost of providing and fixing of
required thickness for rolling
shutter as per direction of E/I.
94.51
89.80
Eighty nine & paise M
eighty only.
25.55
2739.80
Two thousand seven M2
hundred thirty nine
& paise eighty only.
687.50
83.40
Eighty three & paise kg
forty only.
9.29
1764.40
One thousand seven M2
hundred sixty four &
paise forty only.
8.20
Eight & paise twenty
only.
47.70
Forty seven & paise M2
seventy only.
White washing with whiting three 239.26
or more coats ( new work ) as per
direction of E/I.
Finishing walls with water 257.08
proofing
cement
paint
of
M2
Free tenders for Transformer by Government Of Bihar-3896131500
30.
31.
32.
3.
approved brand and manufacture
and of required shade to give an
even shade ( new work ) as per
direction of E/I
Painting with ready mixed paint 175.00
of
approved
brand
and
manufacture in all shades to give
an even shade as per direction of
E/I.
Carriage of materials.
(a) Local sand (3 km)
106.25
51.00
Fifty one only.
187.76
(b) Sand (205 K.M.)
48.16
2081.20
(c) Stone chips (280 K.M.)
34.02
2789.20
(d) Bricks. (8 K.M.)
30361.00 No
529.76
One hundred eighty M3
seven
&
paise
seventy six only.
Two thousand eighty M3
one and twenty paise
only
Two thousand seven M3
hundred eighty nine
and twenty paise
only
Five hundred twenty %o
nine & paise seventy
six only.
Extra cost of materials.
(a) Bricks
30361.00
1464.20
(b) Cement.
529 bags.
38.67
One thousand four %o
hundred sixty four
and twenty paise
only
Thirty eight and sixty Bag.
seven paise only
Construction of office building (50’0”X30’0”)
Items of work
1.
M2
Quantity.
Boring, Providing and installing 220.00
cast in situ single under reamed
300mm dia plies of specified dia
and length below pile cap in
cement concrete piles with mix
1:1.5:3 (1cement:1.5 coarse sand
:3 graded stone aggregate 20mm
nominal size) to carry a safe
working load not less than
specified excluding the cost of
steel reinforcement but including
the cost of boring with bentonite
Rate (Rs)
421.80
Rate in words (Rs)/ Unit
unit
Four hundred twenty M
one & paise eighty
only.
Free tenders for Transformer by Government Of Bihar-3896131500
2.
3.
4.
4A
5.
6.
solution and the length of the pile
to be embedded in pile cap etc. all
complete as per direction of E/I.
Extra over item 1 for Boring, 45.00
providing and installing cast in
situ double under reamed piles,
instead of single under ream of
specified dia and length( only the
quantity of extra bulbs are to be
paid) as per direction of E/I
Providing 100A one brick flat 142.00
soling as per direction of E/I.
Providing and laying in position
specified grade of reinforced
cement concrete excluding the
cost of centring ,shuttering
finishing and reinforcement all
work up to plinth as per direction
of E/I.(1:1.5:3)
(a) Pile& cap beams, band at 9.63
plinth level
(1:1.5:3)
562.20
Five hundred sixty Each.
two & paise twenty
only.
170.20
One hundred seventy M2
& paise twenty only.
3689.10
Three thousand six M3
hundred eighty nine
& paise ten only
3737.50
Three thousand thirty M3
seven & paise fifty
only.
Providing and laying in position 7.75
specified grade of reinforced
cement concrete M20 in stiffener
excluding the cost of centring
,shuttering
finishing
and
reinforcement all work up to five
level as per direction of E/I.
Reinforced cement concrete work 22.40
in beams , suspended floor, roofs
having slope up to 15, landing,
balconies, shelves, chajjas, lintels,
bands, plain window sills, stair
cases and spiral stair cases,
column up to floor five level
excluding cost of centring,
shuttering, and reinforcement
with 0 grade, stone aggregate
20mm nominal size) as per
direction of E/I.
Centring and shuttering including
strutting propping etc. and
removal of form of as per
direction of E/I.
(A) R.C.C. cap beam
70.00
3963.77
Three thousand nine
hundred sixty three M3
& paise seventy
seven only.
173.20
(B) Band of plinth level
173.20
One hundred seventy M2
three & paise twenty
only.
One hundred seventy M2
three & paise twenty
15.24
Free tenders for Transformer by Government Of Bihar-3896131500
7.
8.
9.
10.
11
12.
(C) Stiffener (Column)
61.33
260.60
(D) Providing R.C.C. chajja
17.51
331.20
(E) R.C.C. roof
147.88
205.00
Reinforcement for R.C.C. work
including straightening, cutting
bending, placing in position and
binding all complete as per
direction of E/I.
A) TMTC-500-12mm rod
2417.00
71.30
(B TMTC-500- 10mm rod
2942.00
72.40
(E) Mild steel-6mm rod
713.00
67.40
only.
Two hundred sixty & M2
paise sixty only.
Three hundred thirty M2
one & paise twenty
only.
Two hundred five M2
only.
Seventy one & paise
thirty only.
Seventy two & paise
forty only.
Sixty seven & paise
forty only.
Three
thousand
Thirty five & paise
forty only.
Kg
Kg
Kg
M3
Brick work with bricks of class 23.97
designation100A in foundation
and plinth in cement mortar (1:6)
as per direction of E/I.
Brick work with bricks of class 77.00
designation100A
in
super
structure in cement mortar (1:6)
as per direction of E/I.
3035.40
3377.10
Three
thousand M3
three
hundred
seventy seven &
paise ten only.
Supplying and filling in plinth 111.51
local sand and under floor
including, watering ramming
consolidating
and
dressing
complete as per direction of E/I.
Providing 150mm wide brick 52.13
drain in cement mortar (1:6) with
av. 150mm clear depth and
125mm apron concrete (1:4:8)
over one brick designation 100A
flat soling in proper grade and
slope at the base, the drain duly
plastered
in CM.(1:3) with
punning over exposed surface all
complete as per direction of E/I.
Providing average 150mm thick 115.00
dry rammed khoa beaten to 112
mm (compacted with) made of
well burnt or jhama brick
including ramming property till
compacted thickness is achieved,
curing and carriage of water with
180.20
One hundred eighty M3
& paise twenty only.
378.00
Three
hundred M
seventy eight only.
234.10
Two hundred thirty M2
four & paise ten
only.
Free tenders for Transformer by Government Of Bihar-3896131500
13.
14
15.
16.
17.
18.
19.
20.
21.
all leads making, proper slope and
blinding the top with cement
mortar (1:10) all complete as per
direction of E/I.
52 mm thick cement concrete
flooring with metallic concrete
hardener topping under layer 40
mm thick cement concrete 1:2:4
(1cement :2 coarse sand:4 graded
stone aggregate 20mm nominal
size) and top layer 12mm thick
metallic
concrete
hardener
consisting of mix 1:2 (1cement
hardener mix :2 stone aggregate 6
mm nominal size) by volume @ 2
litre per 50 of cement or as per
manufacture’s specification this
includes cost of cement slurry,
etc. but excluding the cost of
nosing of steps etc. complete as
per direction of E/I.
Providing designation 100A one
brick on edge soling joints filled
with local sand including cost of
watering, taxes, royalty all
complete as per direction of E/I.
Plastering 12mm thick (1:6) as
per direction of E/I.
Providing 12mm C.P. (1:3) with
punning as per direction of E/I.
Cement plaster 18 mm thick in
skirting (up to 30 cm ht.) with
cement mortar 1:3 finished with a
floating coat of neat cement. as
per direction of E/I.
Providing 6mm thick cement
plaster (1:4) as per direction of
E/I.
Providing 16 mm dia fan hook in
room as per direction of E/I.
Providing and laying ceramic
glazed floor tiles 400x400 mm of
1st quality conforming to IS :
13755 of NITCO , ORIENT ,
SOMAY , KAJARIA laid on 20
mm thick cement mortar 1:4 as
per direction of E/I.
Providing and fixing 1st quality
ceramic
glazed
wall
tiles
121.00
297.70
Two hundred ninety M2
seven
&
paise
seventy only.
38.56
272.20
Two
hundred M2
seventy two & paise
twenty only.
673.00
72.10
66.00
117.60
seventy two & paise M2
ten only.
One
hundred M2
seventeen & paise
sixty only.
79.00
177.02
One
hundred M2
seventy seven &
paise two only.
139.00
61.80
Sixty one & paise M2
eighty only.
8.00
114.00
15.00
1065.20
One
hundred No.
fourteen only.
One thousand sixty M2
five& twenty only.
60.00
863.60
Eight hundred sixty M2
three & paise sixty
Free tenders for Transformer by Government Of Bihar-3896131500
22.
23.
24.
25.
26.
27.
28.
29.
conforming to IS : 15622 of
approved make in all colours,
shades except burgundy , bottle
green , black of any size as
approved by E/I over 12 mm thick
bed of cement mortar ( 1: 3 )
Supplying, fitting and fixing
chowkhat of sal wood in door
and window as per direction of
E/I.
Providing and fixing panelled or
panelled and glazed shutter35
thick for door, windows and
clerestory windows including
black enamelled M.S. but hinges
with necessary screws excluding
panelling which will be paid for
separately (Second class teak
wood) as per direction of E/I.
Providing and fixing25 to 40 mm
panelling or panelling and glazing
in panelled of panelled and glazed
shutter for doors, windows and
clerestory windows (area of
opening
for
panel
inserts
excluding portion inside grooves
or rebates to be measured)
panelling for panelled or panelled
and glazed shutter 25mm to
40mm thick (Second class teak
wood) as per direction of E/I.
Providing and fixing M.S. grills
of requirement pattern in frames
of windows etc. with M.S. flats
square or round bar etc. all
complete as per direction of E/I.
Painting on steel work (new
work) with ready mixed paint of
approved brand and manufacture
in all shades to give an even shade
as per direction of E/I.
Painting on wood work (new
work) with ready mixed paint of
approved brand and manufacture
in all shades to give an even shade
as per direction of E/I.
Distempering with oil bound
washable distemper of approved
brand and manufacture to give an
even shade as per direction of E/I.
Finishing walls with water
only.
Sixty six thousand M3
five hundred seventy
five & paise ninety
only.
Two thousand two M2
hundred ninety five
& paise seventy
only.
1.29
66,575.90
42.21
2295.70
25.32
1836.30
One thousand eight M2
hundred thirty six &
paise thirty only
748.00
83.40
Eighty three & paise kg
forty only.
27.78
51.00
Fifty one only.
M2
84.57
51.00
Fifty one only.
M2
571.00
48.30
Forty eight & paise M2
thirty only.
673.00
47.70
Forty seven & paise M2
Free tenders for Transformer by Government Of Bihar-3896131500
30.
31.
32.
34.
37.
38.
39.
40.
41.
proofing
cement
paint
of
approved brand and manufacture
and of required shade to give an
even shade as per direction of E/I
Providing and laying in position
cement concrete of (1:2:4)
excluding the cost of centring
and shuttering all work up to
plinth as per direction of E/I
Providing and fixing white
vitreous china wash closed
squatty pan (Indian type W.C.
pan) as per direction of E/I.
Providing and fixing white
vitreous china pedestal type water
closed (European type )W.C. pan
as per direction of E/I.
Providing and fixing white
vitreous china wash basin 550
x400 mm flat wash basin as per
direction of E/I.
Providing 150mm dia R.C.C. as
per direction of E/I.
seventy only.
M3
3.02
3137.90
Three thousand one
hundred thirty seven
& paise ninety only.
3.00
2420.92
1
2251.03
Two thousand four Each
hundred twenty &
paise ninety two
only.
Two thousand two Each.
hundred fifty one &
paise three only.
3
542.72
Five hundred forty Each.
two & paise seventy
two only.
40.04 M
196.40
Providing and fixing on wall face 22.62 M
unplasticised P.V.C. pipe 110mm
P.V.C. as per direction of E/I.
Providing and fixing on wall face
unplasticised P.V.C. mould as
per direction of E/I.
(a) 110mX110mXsingle Tee with 3.00
door
186.40
One hundred
six & paise
only.
One hundred
six & paise
only.
(b) 110mm cowl
3.00
205.70
(c) 110mm bend
9.00
23.44
(d) 110mm Steel Jali
4.00
23.14
276.50
Fancy mirror 600X45mm size 4.00
super glass as per direction of E/I
Carriage of materials.
(a) Bricks. ( 8 K.M.) No.
65402.00
500.06
529.76
(b) Stone chips ( 110 K.M.)
56.00
2789.20
(c) Sand ( 205 K.M.)
87.00
2081.20
ninety M
forty
eighty M
forty
Two
hundred
seventy six &paise
fifty only.
Two hundred five &
paise seventy only
Twenty three & paise
forty four only.
Twenty three & paise
fourteen only.
Five hundred & paise
six only.
Each.
Each.
Each.
Each.
Each.
Five hundred twenty %o
nine & paise seventy
six only
Two thousand seven M3
hundred eighty nine
and twenty paise
only
Two thousand eighty M3
one and twenty paise
Free tenders for Transformer by Government Of Bihar-3896131500
only
One hundred eighty M3
seven & seventy six
only.
One thousand four %o
hundred sixty four
and twenty paise
only
Thirty eight and sixty Bag
seven paise only
(d) Local sand (3 K.M.)
135
187.76
42
Extra cost of Bricks.(No.)
65402.00
1464.20
43
Extra cost of Cement.
830.00
38.67
Items of work
Quantity.
Supply of 125mm dia U. P.V.C.
crossing pipe conforming to ISS
as per direction of E/I.
Supply of 50mm dia U.P.V.C.
crossing pipe conforming to ISS
as per direction of E/I.
Supply of 50mm dia P.V.C.
ribbed strainer of approved
quality as per direction of E/I.
Supplying,
125mmX50mm
P.V.C. reducing socket of
approved quality as per direction
of E/I.
Supply all labour of materials &
TPPVC cap over the sew T/W all
as per direction of E/I.
LABOUR COST.
Boring by Jet or dheki as per
direction of E/I.
(a) for 125mm dia P.V.C. pipe
(b) 0 to 30 M
27.00
Rate
figures
315.00
58.00
140.00
One hundred forty M
only.
3 .00
165.00
One hundred sixty M
five only.
1.00
165.00
One hundred sixty Each.
five only.
1.00
65.00
Sixty five only.
Each.
27.00
383.54
Three
hundred
eighty three & paise
fifty four only.
M
(b) For 50mm dia P.V.C. pipe
0 to 30 M
3.00
221.32
M
30 to 60 M
30.00
254.52
60 to 99 M
39.00
276.65
Two hundred twenty
one & paise thirty
two only.
Two hundred fifty
four & paise fifty
two only.
Two
hundred
seventy six & paise
sixty five only.
Two hundred eighty
& paise fifty only.
Water Supply PART-A
1.
2.
3.
4.
5.
6.
7.
Supplying all equipment tools and 1.00
labours to develop the tube well
280.50
in Rate in words.
Three
hundred
fifteen only.
Unit
M
M
M
Each
Free tenders for Transformer by Government Of Bihar-3896131500
8.
9.
10.
11.
12.
13.
for sand free discharge period etc.
all complete as per direction of
E/I.
Supply all materials & labour for 1.00
arrangement of additional water
required during the drilling work
as per direction of E/I.
Supplying all equipments, tools 1.00
and installation of 1 H.P. single
phase submersible mortar pump
set of WSB/ISI mark 2000 RPM
capable of discharge 5000 LPM at
45M head with all necessary
raiser pipe, strainer, control panel,
1.25” full way valve, 1.25” M.S.
clamp, 1.25” G.I. Elbow, 1.25
check valve, 1.25X9” long G.I.
nipple etc. all complete as per
direction of E/I.
PART-B
Providing & fixing G.I. pipes
complete with G.I. fitting
including trenching and refilling
etc.& internal work as per
direction of E/I.
(i) 15mm dia
30.00
(ii) 25mm dia
181.95
30.00
1500.00
One thousand five Each.
hundred only.
32,500.00
Thirty two thousand Each.
five hundred only.
102.84
One hundred two & M
paise eighty four
only.
One hundred eighty M
one & paise ninety
five only.
Seven
&
paise Lt.
fourteen only.
Providing and placing in terrace 1000.00
polythene water tank of ISI mark
as per direction of E/I.
Providing
fixing
following
fittings. As per direction of E/I.
(i) 15mm dia bib cock
6.00
125.21
(ii) Brass stop cock
4.00
125.11
(iii) Providing & fixing gate valve 2.00
25mm
(iv) C.P. bib cock
4.00
(v) Towel rail
3.00
210.96
(iv) C.P. brass soap dish
3.00
Providing all materials to 1.00
construct platform for P.V.C. tank
7.14
400.00
190.28
95.00
750.00
One hundred twenty
five & paise twenty
one only.
One hundred twenty
five & paise Eleven
only.
Two hundred ten &
paise ninety six only.
Four hundred only.
One hundred ninety
& paise twenty eight
only.
Ninety five only.
Seven hundred fifty
only.
Each.
Each.
Each.
Each.
Each.
Each.
Each.
Free tenders for Transformer by Government Of Bihar-3896131500
all complete work.
4.
1.
2.
3.
Construction of Toilet complex with water supply and sanitation work.
Item
Making 25 Cm (10”) dia bore up
to 4 Depth below ground with
hand auger of approved quality in
ordinary soil (Vide classification
of soil A) true to plumb and
without eccentricity in any stage
of operation and disposal of the
excavated earth up to 50 Lead
including all lifts all complete as
per direction of E/I.
63 CM(25) under ream making
63 cm(25) dia under ream at
required with hand auger of
approved quality in ordinary soil
(vide classification of soil -A)
true to
plumb and without
eccentricity in any stage of
operation and disposal of the
excavated earth up to 50 m Lead
including all lifts all complete as
per approved design and
direction of E/I.
Providing and laying in position
specified
grade
M20
of
reinforced
cement
concrete
excluding the cost of centring
,shuttering
finishing
and
reinforcement all work up to
plinth as per direction of E/I.
Reinforced cement concrete M20
work in beams , suspended floor,
roofs having slope up to 15,
landing,
balconies,
shelves,
chajjas, lintels, bands, plain
window sills, stair cases and
spiral stair cases, column up to
floor five level excluding cost of
centring,
shuttering,
and
reinforcement with grade, stone
aggregate 20mm nominal size) as
per direction of E/I.
Providing and laying in position
specified grade of reinforced
cement concrete M20 in stiffener
Quantity.
24.39
Rate (Rs)
72.70
Rate in words(Rs)
Unit
Seventy two & paise M
seventy only.
8.00
77.50
Seventy seven
paise fifty only.
4.43
3689.10
Three thousand six
hundred eighty nine
& paise ten only.
2.5
3963.77
Three thousand nine M3
hundred sixty three
& seventy seven
only.
2.78
3737.50
Three
thousand
seven hundred thirty
seven & paise fifty
& Each.
M3
M3
Free tenders for Transformer by Government Of Bihar-3896131500
4.
5.
excluding the cost of centring
,shuttering
finishing
and
reinforcement all work up to five
level as per direction of E/I.
Supplying and filling in plinth 9.62
local sand and under floor
including, watering ramming
consolidating
and
dressing
complete as per direction of E/I.
Providing 100A one brick flat 14.28
soling as per direction of E/I.
only.
One hundred eighty
& paise twenty only.
170.20
One
hundred M2
seventy & paise
twenty only.
Three
thousand M3
Thirty five & paise
forty only.
Three thousand three M3
hundred
seventy
seven & paise ten
only.
Two hundred ninety M2
seven
&
paise
seventy only.
7.
Brick work in plinth (1:6) as per 4.18
direction of E/I.
3035.40
8.
Brick work in super structure 10.60
(1:6) as per direction of E/I.
3377.10
9.
52 mm thick cement concrete 16.92
flooring with metallic concrete
hardener topping under layer 40
mm thick cement concrete 1:2:4
(1cement :2 coarse sand:4 graded
stone aggregate 20mm nominal
size) and top layer 12mm thick
metallic
concrete
hardener
consisting of mix 1:2 (1cement
hardener mix :2 stone aggregate
6 mm nominal size) by volume
@ 2 litre per 50 of cement or as
per manufacture’s specification
this includes cost of cement
slurry, etc. but excluding the cost
of nosing of steps etc. complete
as per direction of E/I.
Providing average 150mm thick 9.33
dry rammed khoa beaten to 112
mm (compacted with) made of
well burnt or jhama brick
including ramming property till
compacted thickness is achieved,
curing and carriage of water with
all leads making, proper slope
and blinding the top with cement
mortar (1:10) all complete as per
direction of E/I.
Providing 6mm thick cement 20.36
plaster (1:4) as per direction of
E/I.
297.70
10.
11.
M3
180.20
234.10
Two hundred thirty M2
four & paise ten
only.
61.80
Sixty one & paise
eighty only.
M2
Free tenders for Transformer by Government Of Bihar-3896131500
12.
13.
14.
15.
16.
17.
18.
19.
Seventy two & paise M2
ten only.
One
hundred M2
seventeen & paise
sixty only.
One thousand sixty M2
five only.
Plastering 12mm thick C P (1:6) 86.75
as per direction of E/I.
Providing 12mm C.P. (1:3) with 16.71
punning as per direction of E/I.
72.10
Providing and laying ceramic 9.91
glazed floor tiles 400x400 mm of
1st quality conforming to IS :
13755 of NITCO , ORIENT ,
SOMAY , KAJARIA laid on 20
mm thick cement mortar 1:4 as
per direction of E/I.
Providing and fixing 1st quality 30.20
ceramic glazed wall tiles
conforming to IS : 15622 of
approved make in all colours,
shades except burgundy , bottle
green , black of any size as
approved by E/I over 12 mm
thick bed of cement mortar (1: 3 )
1065.20
863.60
Eight hundred sixty M2
three & paise sixty
only.
Finishing walls with water 108.00
proofing cement paint of
approved brand and manufacture
and of required shade to give an
even shade as per direction of E/I
Supplying, fitting and fixing Sal 0.2
wood chowkhat in door and
window as per direction of E/I.
47.70
Forty seven & paise
seventy only.
66,575.90
Providing and fixing panelled or 5.03
panelled and glazed shutter 35
mm thick for door, windows and
clerestory windows including
black enamelled M.S. but hinges
with necessary screws excluding
panelling which will be paid for
separately (Second class teak
wood) as per direction of E/I.
Providing and fixing panelling 25 1.65
to 40 mm thick or panelling and
glazing in panelled of panelled
and glazed shutter for doo,
windows and clerestory windows
(area of opening for panel inserts
excluding portion inside grooves
or rebates to be measured)
panelling for panelled or panelled
and glazed shutter 25mm to
2295.70
Sixty six thousand M3
five hundred seventy
five & paise ninety
only.
Two thousand two M2
hundred ninety five
& paise seventy
only.
117.60
1836.30
M2
One thousand eight M2
hundred thirty six &
paise thirty only
Free tenders for Transformer by Government Of Bihar-3896131500
20.
21
22
23.
24.
28.
40mm thick (Second class teak
wood) as per direction of E/I.
Providing and fixing M.S. grills
of required pattern in frames of
windows etc. with M.S. flats
square or round bar etc. all
complete as per direction of E/I.
Painting on wooden work(new
work) with ready mixed paint of
approved brand and manufacture
in all shades to give an even
shade as per direction of E/I.
Painting on Steel work (new
work) with ready mixed paint of
approved brand and manufacture
in all shades to give an even
shade as per direction of E/I.
Reinforcement for R.C.C. work
including straightening, cutting
bending, placing in position and
binding all complete as per
direction of E/I.
(B TMTC-500- 8 to 10mm rod
(E) Mild steel-6mm rod
37.50
83.40
Eighty three & paise kg
forty only.
15.68
51.00
Fifty one only.
M2
1.39
51.00
Fifty one only.
M2
600.00
72.40
160.00
67.40
Seventy two & kg
paise forty only.
Sixty seven & paise kg
forty only.
Sanitary work
Providing and fixing white 2.00
vitreous china water closet
squatting pan (Indian type W.C.
pan) as per direction of E/I.
Providing and fixing white 1.00
vitreous china pedestal type
water closet (European type
W.C.) as per direction of E/I.
Providing 150mm dia R.C.C. 12.00
pipe as per direction of E/I.
29.
Providing and fixing on wall face 19.20
unplasticised P.V.C. as per
direction of E/I.
30.
Providing and fixing on wall
faces unplasticised P.V.C. mould
jail as per direction of E/I.
(a)
110MX110mmX110mm 3.00
Single Tee.
(b) 110mm cowl
3.00
2420.92
2251.00
196.40
186.40
276.50
205.70
Two thousand four Each.
hundred twenty &
paise ninety two
only.
Two thousand two Each.
hundred fifty one
only.
One hundred ninety M
six & paise forty
only.
One hundred eighty M
six & paise forty
only.
Two
hundred Each.
seventy six & paise
fifty only.
Two hundred five & Each.
paise seventy only
Free tenders for Transformer by Government Of Bihar-3896131500
31.
32.
33
34.
35.
36.
37.
38.
39.
(c) 110 mm band
9.00
144.00
One hundred forty Each.
four only.
Twenty three & Each.
paise fourteen only.
Five hundred forty Each.
five & seventy two
only.
(d) 110mm Steel Jali
3.00
23.14
Providing and fixing white
vitreous china wash basin
550x400mm as per direction of
E/I.
Fancy mirror 600mmX450mm
size superior glass as per
direction of E/I.
Water Supply
Supply of 125mm dia U. P.V.C.
crossing pipe conforming to ISS
as per direction of E/I.
Supply of 50mm dia U.P.V.C.
crossing pipe conforming to ISS
as per direction of E/I.
3.00
545.72
4.00
500.06
Five hundred
only.
27.00
315.00
Three
hundred
fifteen only.
M
58.00
140.00
One hundred forty
only.
M
9.00
165.00
One hundred sixty M
five only.
1.00
165.00
One hundred sixty Each.
five only.
six Each.
Supply of 50mm dia P.V.C.
ribbed strainer of approved
quality as per direction of E/I.
Supplying,
125mmX50mm
P.V.C. reducing socket of
approved quality as per direction
of E/I.
Supply all labour of materials &
TPPVC cap over the sew T/W all
as per direction of E/I.
LABOUR COST.
Boring by Jet or dheki by
suitable means as per direction of
E/I.
(a) for 125mm dia P.V.C. pipe
(i) 0 to 30 m
1.00
65.00
Sixty five only.
27.00
383.54
Three
hundred M
eighty three & paise
fifty four only.
(b) For 50mm dia P.V.C. pipe
0 to 30 M
3.00
221.32
30 to 60 M
30.00
254.52
60 to 99 M
39.00
276.65
Two hundred twenty
one & paise thirty
two only.
Two hundred fifty
four & paise fifty
two only.
Two
hundred
seventy six & paise
sixty five only.
Two hundred eighty
& paise fifty only.
Supplying all equipment tools 1.00
and labours to develop the tube
well for sand free discharge
280.50
Each.
M
M
M
each
Free tenders for Transformer by Government Of Bihar-3896131500
40.
41.
42.
43.
43.
44.
period etc. all complete as per
direction of E/I.
Supply all materials & labour for 1.00
arrangement of additional water
required during the drilling work
as per direction of E/I.
Supplying all equipments, tools 1.00
and installation of 1 H.P. single
phase submersible mortar pump
set of WSB/ISI mark 2000 RPM
capable of discharge 5000 LPM
at 45M head with all necessary
raiser pipe, strainer, control
panel, 1.25” full way valve, 1.25”
M.S. clamp, 1.25” G.I. Elbow,
1.25 check valve, 1.25X9” long
G.I. nipple etc. all complete as
per direction of E/I.
PART-B
Providing & fixing G.I. pipes
complete with G.I. fitting
including trenching and refilling
etc.& internal work as per
direction of E/I.
(i) 15mm dia
30.00
(ii) 25mm dia
181.95
30.00
1500.00
One thousand five Each.
hundred only.
32,500.00
Thirty two thousand Each.
five hundred only.
102.84
One hundred two & M
paise eighty four
only.
One hundred eighty M
one & paise ninety
five only.
Seven
&
paise Lt.
fourteen only.
Providing and placing in terrace 1000.00
polythene water tank of ISI mark
as per direction of E/I.
Providing
fixing
following
fittings. As per direction of E/I.
(i) 15mm dia bib cock
6.00
7.14
125.21
(ii) Brass stop cock
4.00
125.11
(iii) Providing & fixing gate 2.00
valve 25mm
210.96
(iv) C.P. bib cock
(v) Towel rail
4.00
3.00
400.00
190.28
(iv) C.P. brass soap dish
3.00
Providing all materials to 1.00
construct platform for P.V.C.
95.00
750.00
One hundred twenty
five & paise twenty
one only.
One hundred twenty
five & paise Eleven
only.
Two hundred ten &
paise ninety six
only.
Four hundred only.
One hundred ninety
& paise twenty eight
only.
Ninety five only.
Seven hundred fifty
only.
Each.
Each.
Each.
Each.
Each.
Each.
Each.
Free tenders for Transformer by Government Of Bihar-3896131500
tank all complete work.
45.
46.
Carriage of materials.
(a) Local sand (3 km)
9.62
187.76
(b) Coarse Sand (205 K.M.)
13.16
2081.20
(c) Stone chips ( 110 K.M.)
8.53
2789.20
(d) Bricks. (8 K.M.)
6877 Nos.
529.76
Extra cost of materials.
(a) Bricks
6877 Nos.
1464.20
(b) Cement.
116 bags.
38.67
One hundred eighty M3
seven
&
paise
seventy six only.
Two thousand eighty M3
one and twenty paise
only
Two thousand seven M3
hundred eighty nine
and twenty paise
only
Five hundred twenty %o
nine & paise seventy
six only.
One thousand four %o
hundred sixty four
and twenty paise
only
Thirty eight and bag.
sixty seven paise
only
5 A Construction of Inspection Camber 0.6MX0.45MX0.7 M deep (With R.C.C.)Cover.
1.
2.
3.
4.
Items of work
Quantity.
Earth work in excavation in
foundation trenches or drains (not
exceeding 1.5m in width or 10
sqm on plan) including dressing
of sides and ramming of bottoms,
lift upto 1.5m including getting
out the excavated soil and
disposal of surplus excavated soil
as directed within a lead of 50 m.
as per direction of E/I.
Supplying, & filling in plinth with
local sand under floo including
watering, ramming, consolidation
and dressing complete as per
direction of E/I.
Providing designation 100A a B/F
soling as per direction of E/I.
Providing & laying concrete of
grade 1:2:4 excluding cost of
centring,
shuttering
and
reinforcement-All up to plinth-
1.271
Rate
in Rate in words.(Rs)
Unit
figures (Rs)
160.60
One hundred Sixty & M3
paise sixty only.
0.123
180.20
One hundred eighty M3
& paise twenty only.
1.54
170.20
0.1232
3137.90
One hundred seventy M2
& paise twenty only.
Three
thousand M3
thirty seven & paise
ninety only.
Free tenders for Transformer by Government Of Bihar-3896131500
5.
6.
7.
8.
9.
10.
etc. all complete as per direction
of E/I.
Brick work with brick of class
designation 100A in all complete
1:6 as per direction of E/I.
Providing 12mm C.P. in (1:3)
with clean coarse sand of F.M.
1:5 and all complete as per
direction of E/I.
Providing 12mm C.P. (1:4) with
clean coarse sand of F.M.1:5 &
flooring coat of neat cement
including scressing, curing with
all lead all complete in side as per
direction of E/I.
Providing and laying in position
reinforced cement concrete of
grade M 20 excluding the cost of
centring
shuttering
and
reinforcement as per direction of
E/I.
Three thousand thirty M3
five & paise forty
only.
Ninety four & paise M2
fifty only.
0.581
3035.40
6.17
94.50
1.575
83.30
Eighty three & paise M2
thirty only.
0.084
3234.90
Three thousand two M3
hundred thirty four &
paise ninety only.
Reinforcement with TMTC-500- 5.85
8to 10 MM dia including,
straightening, centring, bending &
placing in position all complete as
per direction of E/I.
Carriage of materials.
(a) Bricks. (8 K.M.)
284.00 Nos.
72.40
Seventy two & paise kg
forty only.
529.76
(b) Coarse Sand ( 205 K.M.)
0.21
2081.20
(c) Stone chips ( 110 K.M.)
0.36
2789.20
Five hundred twenty %o
nine & paise seventy
six only.
Two thousand eighty M3
one and twenty paise
only
Two thousand seven M3
hundred eighty nine
and twenty paise
only
Extra cost
(d) Bricks.
284.00 Nos.
1464.20
Cement
5.00
38.67
5B
Construction of Septic tank 3 MX1.8MX2.4 M
One thousand four %o
hundred sixty four
and twenty paise
only
Thirty eight and sixty bag
seven paise only
Free tenders for Transformer by Government Of Bihar-3896131500
Items of work
Quantity.
1.
Earth work in excavation in 28.25
foundation trenches or drains (not
exceeding 1.5m in width or 10
sqm on plan) including dressing
of sides and ramming of bottoms,
lift upto 1.5m including getting
out the excavated soil and
disposal of surplus excavated soil
as directed within a lead of 50 m.
as per direction of E/I.
2.
Supplying, & filling in plinth with
local sand under floor including
watering, ramming, consolidation
and dressing complete as per
direction of E/I.
Providing designation 100A a B/F
soling as per direction of E/I.
Providing & laying PCC of grade
1:2:4 excluding cost of centring,
shuttering and reinforcement-All
up to plinth- etc. all complete as
per direction of E/I.
Shuttering for foundation as per
direction of E/I.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
1.159
180.20
One hundred eighty M3
& paise twenty only.
11.59
170.20
1.622
3137.90
One hundred seventy M2
& paise twenty only.
Three thousand one M3
hundred thirty seven
& paise ninety only.
1.86
127.66
Brick work in 1:4 cement as per 8.60
direction of E/I.
R.C.C. cover slab (1:2:4) as per 1.383
direction of E/I.
Shuttering for plinth and wall as
per direction of E/I.
12mm C.P.(1:3) with 5% cico &
neat cement punning in internal
face as per direction of E/I.
12mm Cement plaster1:4 as per
direction of E/I.
TMTC 500 10mm dia bar as per
direction of E/I.
R.C.C. cover with M.S. frame (
wt Of frame 25 kg ) as per
direction of E/I.
Providing M.S. foot rest including
fixing
in
manhole
with
20X20X10 mm cement concrete
in blocks 1:3:6 with 20mm dia
Rate
in Rate in words.(Rs)
Unit
figures(Rs)
160.60
one hundred Sixty & M3
paise sixty only.
3230.00
3586.67
8.05
205.00
46.09
117.60
6.36
83.30
110.64
72.40
2.00
1250.00
4.00
117.28
One hundred twenty
seven & paise sixty
only.
Three thousand two
hundred thirty only.
Three thousand five
hundred eighty six &
paise sixty seven
only.
Two hundred five
only.
One
hundred
seventeen & paise
sixty only.
Eighty three & paise
thirty only.
Seventy two & paise
forty only.
One thousand two
hundred fifty only.
M2
M3
M3
M2
M2
M2
kg
Each.
One
hundred Each.
seventeen & paise
twenty eight only.
Free tenders for Transformer by Government Of Bihar-3896131500
14.
15.
16.
17
round bar as per direction of E/I.
Supplying, fitting and fixing `
following SW fitting.
(a) 150mm SW Tee.
2.00
347.85
(b) 75mm HCI cowl
1.00
137.25
(c) 75mm dia HCI vent pipe
1.8 M
220.85
3850.00
Nos.
529.76
(b) Sand (205 K.M.)
4.401
2081.20
(c) Stone chips (110 K.M.)
2.549
2789.20
3850.00
Nos.
1464.20
12.00
38.67
Carriage of materials.
(a) Bricks. (8 K.M.)
Extra cost of Bricks.
Extra cost of cement
Three thousand forty Each.
seven & paise eighty
five only.
One hundred twenty Each.
five only.
Two hundred twenty M
& paise eighty five
only.
Five hundred twenty %o
nine & paise seventy
six only.
Two thousand eighty M3
one and twenty paise
only
Two thousand seven M3
hundred eighty nine
and twenty paise
only
One thousand four %o
hundred sixty four
and twenty paise
only
Thirty eight and sixty bag
seven paise only
PART-C Construction of Soak pit 1.8 MX3.0M deep.
Items of work
1.
2.
3.
Quantity.
Earth work in excavation in 12.46
foundation trenches or drains (not
exceeding 1.5m in width or 10
sqm on plan) including dressing
of sides and ramming of bottoms,
lift upto 1.5m including getting
out the excavated soil and
disposal of surplus excavated soil
as directed within a lead of 50 m.
as per direction of E/I.
Brick work 1 :6 with brick of 4.345
class designation 100A in all
complete 1:6 as per direction of
E/I.
R.C.C.work in beams, floor roof 0.415
having slope up to 15, of grade
Rate
in Rate in words.(Rs)
Unit
figures(Rs)
160.60
One hundred Sixty & M3
paise sixty only.
3035.40
Three thousand thirty / M3
five & paise forty
only.
3689.10
Three thousand five / M3
hundred eighty six &
Free tenders for Transformer by Government Of Bihar-3896131500
4.
5.
6.
7.
8
M20 (with 20mm aggregate)all
complete excluding the cost of
centering, shuttering, finishing as
per direction of E/I.
Reinforcement for R.C.C. with 27.00
TMTC-500-8to10mm
dia
including straightening, cutting,
bending and placing in position
all complete as per direction of
E/I.
paise
only.
sixty
seven
72.40
Seventy two & paise / kg
forty only.
Providing brick bats 22mm to 3.561
40mm for filling soak pits as per
approved as per direction of E/I.
Carriage of materials.
(a) Bricks. (8 K.M.)
1371.00
1143.10
One thousand one / M3
hundred forty three
& paise ten only.
529.76
(b) Sand (Lead 205 K.M.)
0.64
2081.20
(c) Stone chips (lead 110 K.M.)
2.88
2789.20
1371
1464.20
6.00
38.67
Five hundred twenty
nine & paise seventy
six only.
Two thousand eighty
one and twenty paise
only
Two thousand seven
hundred eighty nine
and twenty paise
only
One thousand four
hundred sixty four
and twenty paise
only
Thirty eight and sixty
seven paise only
Quantity.
Rate
in Rate in words.(Rs)
Unit
figures(Rs)
180.20
One hundred eighty / M3
& paise twenty only.
Extra cost of Bricks.
Extra cost of cement
%o
/ M3
/ M3
%o
bag
5.Area Development
Items of work
1.
Supplying, & filling in plinth with 167.10
local sand under floo including
watering, ramming, consolidation
and dressing complete as per
direction of E/I.
2.
Providing designation 100A a B/F 557
soling as per direction of E/I.
Providing & laying concrete of 83.55
grade 1:2:4 excluding cost of
centring,
shuttering
and
reinforcement-All up to plinthetc. all complete as per direction
of E/I.
3.
170.20
3037.30
One hundred seventy / M2
& paise twenty only.
Three thousand thirty / M3
seven & paise thirty
only.
Free tenders for Transformer by Government Of Bihar-3896131500
5.
7.
Carriage of materials.
(a) Local sand (3 K.M. lead)
176
187.76
(b) Bricks. (8 K.M.)
17824
529.76
(c) Stone chips (lead 110 K.M.)
74.32
2789.20
(d) Sand (Lead 205 K.M.)
76.69
2081.20
17824
1464.20
558
38.67
Extra cost of Bricks.
8
Extra cost of cement
6.
One hundred eighty / M3
seven
&
paise
seventy six only.
Five hundred twenty %o
nine & paise seventy
six only.
Two thousand seven
hundred eighty nine
and twenty paise
only
Two
thousand
eighty
one
and
twenty paise only
only
One thousand four
hundred sixty four
and twenty paise
only
Thirty eight and sixty
seven paise only
/ M3
/ M3
%o
bag
Construction of Heating chamber 3 units.
Bill of Quantity for one unit.
Items of work
Quantity.
1.
Brick (1:4) with brick of class 9.18
designation 100 A in super
structure as per direction of E/I.
2.
12 mm Cement plaster in coarse 78.18
sand of mix (1:6) as per direction
of E/I.
R.C.C.M20 work in beam 2.31
suspended floor, roof etc. as per
direction of E/I.
3.
4.
7.
Rate
in Rate in words.(Rs)
Unit
figures(Rs)
3571.70
Three thousand five / M3
hundred seventy one
& paise seventy
only.
72.10
Seventy two & paise / M2
ten only.
3963.77
RCC M20 up to plinth as per 1.04
direction of E/I.
3689.10
Reinforcement with TMTC-500- 347.00
8to10mm dia for R.C.C. including
straightening, cutting, bending
and placing in position all
complete as per direction of E/I.
Providing and fixing 1mm thick 2.27
M.S. sheet door with frame of
72.40
2090.40
Three
thousand / M3
seven hundred thirty
seven & paise fifty
only.
Three
thousand M3
eighty nine & paise
ten only.
Seventy two & paise /kg
forty only.
Two thousand ninety / M2
& paise forty only.
Free tenders for Transformer by Government Of Bihar-3896131500
40X40X6mm angle iron as per
direction of E/I.
Finishing walls with water
proofing
cement
paint
of
approved brand
Painting with ready mixed paint
of approved brand of manufacture
as per direction of E/I.
Providing 52mm thick flooring
Shuttering, centring
Band
8.
9.
10.
11.
7.
2.
3.
47.70
Forty seven & paise / M2
seventy only.
2.27
51.00
Fifty one only.
13.94
297.70
8.47
173.20
roof
Carriage cost of materials.
(a) Sand (205 K.M.)
18.07
205.00
5.90
2081.20
(b) Bricks (8 km )
3727.00
529.76
(c) Stone chips (110 km)
3.49
2789.20
Extra cost of materials.
(a) Bricks
3727.00
1464.20
(b) Cement.
66.00 bags.
38.67
/ M2
M2
M2
M2
Two thousand eighty / M3
one and twenty paise
only
Five hundred twenty %o
nine & paise seventy
six only.
Two thousand seven / M3
hundred eighty nine
and twenty paise
only
One thousand four %o
hundred sixty four
and twenty paise
only
Thirty eight and sixty /bag.
seven paise only
Construction of boundary wall.
Items of work
1.
78.18
Quantity.
Making 25 Cm. dia bore up to 4m 319.74
with hand auger as per direction
of E/I.
63 cm (25) under Ream making 104
63 cm (25) dia under ream at
required with hand auger of
approved quality in ordinary soil
(vide classification of soil -A) true
to plumb and without eccentricity
in my stage of operation and
disposal of the excavated earth up
to 50 Lead including all lifts, all
complete as per direction of E/I.
Supplying, & filling in plinth with 4.16
Rate
in Rate in words.(Rs)
Unit
figures(Rs)
72.70
Seventy two & paise /M
seventy only.
77.50
Seventy seven
paise fifty only.
& Each.
180.20
One hundred eighty / M3
Free tenders for Transformer by Government Of Bihar-3896131500
4
5.
6.
8.
9.
10.
11.
12.
13.
14.
local sand under floor including
watering, ramming, consolidation
and dressing complete as per
direction of E/I.
Providing designation 100A a B/F 54.60
soling as per direction of E/I.
Providing
R.C.C.M20
in 50.75
foundation excluding cost of
reinforcement,
shuttering,
centring, as per direction of E/I.
& paise twenty only.
170.20
3689.10
One hundred seventy / M2
& paise twenty only.
Three thousand six / M3
hundred eighty nine
& paise ten only.
Three
thousand / M3
seven hundred thirty
seven & paise fifty
only.
Three thousand three / M3
hundred
seventy
seven & paise ten
only.
Seventy two & paise / M2
ten only.
Providing R.C.C.M20 in stiffener 15.73
excluding cost of reinforcement,
shuttering, centring,
as per
direction of E/I.
Brick with (1:6) brick of class 84.83
designation 100 A in super
structure as per direction of E/I.
3737.50
12 mm cement plaster in coarse 2197.41
sand of mix (1:6) as per direction
of E/I.
Finishing walls with water 2197.41
proofing
cement
paint
of
approved brand and manufacture
and of required shade to give an
even shade as per direction of E/I.
Providing
reinforcement
for
R.C.C. work including cutting as
per direction of E/I.
(a)Mild steel 6mm dia plain rod
978.80
72.10
47.70
Forty seven & paise / M2
seventy only.
67.40
(b) TMTC-500- 8 to 10mm dia.
4094.65
72.40
(c) TMTC-500- 12MM dia.
652.53
71.30
Sixty seven & paise /kg
forty only.
Seventy two & paise /kg
forty only.
Seventy one & paise /kg
thirty only.
3377.10
Providing shuttering and centring
for cement concrete work as per
direction of E/I.
(a) Band & Beam
241.44
173.20
(b) Stiffner
260.60
179.45
Providing M.S. framing gate as 728
per direction of E/I.
Supply of materials.
(a) M.S. Angle 50X50X6
6.44
55.30
(b) Barbed wire
59.51
972.28
83..40
One hundred seventy / M2
three & paise twenty
only.
Two hundred sixty & / M2
paise sixty only.
Eighty three and /kg
paise forty.
Fifty five & paise /kg
thirty only.
Fifty nine & paise /kg
Free tenders for Transformer by Government Of Bihar-3896131500
fifty one only.
Twelve
&
twenty only.
Twenty two
seventy paise
15.
Cutting M.S. Angle.
822.19
12.20
16 .
Labour for fitting and fixing
barbed wire as per direction of
E/I.
Drilling 6mm dia of holes as per
direction of E/I.
Painting on wooden work with
ready mixed paint of approved
brand and manufacture in all
shades to give an even shade as
per direction of E/I.
Welding charges in M.S. Angle as
per direction of E/I.
Carriage cost of materials.
(a) Sand (45 km)
730.92
22.7
1644.39
3.90
104
51.00
4991.89
1.90
One & paise ninety /cm
only.
133.44
1373.20
(b) Bricks. (8 km)
67152.33
529.76
(c) Stone chips(110 km)
96.74
2789.20
(d) Local sand (3 km)
6.69
187.76
One thousand three
hundred
seventy
three & paise twenty
only.
Five hundred twenty
nine & paise seventy
six only.
Two thousand seven
hundred eighty nine
and twenty paise
only
One hundred eighty
seven
&
paise
seventy six only.
Extra cost of materials.
(a) Bricks
67152
1464.20
(b) Cement.
1400
38.67
17.
18.
19.
20.
21.
8.
and /M
Three & paise ninety Each.
only.
Fifty one only.
/ M2
/ M3
%o
/ M3
/ M3
One thousand four %o
hundred sixty four
and twenty paise
only
Thirty eight and sixty /bag.
seven paise only
Construction of filteration unit for T.R.W. at Motihari.
Items of work
1.
paie Each.
Quantity.
Earth work in excavation in 3.11
foundation trenches or drains (not
exceeding 1.5m in width or 10
sqm on plan) including dressing
of sides and ramming of bottoms,
lift upto 1.5m including getting
out the excavated soil and
disposal of surplus excavated soil
Rate
in Rate in words.(Rs)
Unit
figures(Rs)
160.60
One hundred Sixty & / M3
paise sixty only.
Free tenders for Transformer by Government Of Bihar-3896131500
as directed within a lead of 50 m.
as per direction of E/I.
Filling available excavated earth
(excluding rock) in trenches,
plinth, sides of foundations etc.in
laye not exceeding 20 cm in depth
consolidating each deposited layer
by ramming and watering lead as
per direction of E/I.
Making 25 Cm. dia bore up to 4m
with hand auger as per direction
of E/I.
Supplying, & filling in plinth with
local sand under floo including
watering, ramming, consolidation
and dressing complete as per
direction of E/I.
Providing designation 100A a B/F
soling as per direction of E/I.
Reinforced cement concrete work
excluding the cost of centring,
shuttering,
finishing
and
reinforcement-all complete up to
plinth with 1:2:4 (1cement:2 coae
sand:4 graded stone aggregate
20mm nominal size) as per
direction of E/I.
Providing R.C.C.M20 above
plinth in band as per direction of
E/I.
3.11
51.80
Fifty one & paise / M3
eighty only.
197.51 M
72.70
Seventy two & paise /M
seventy only.
11.58
180.20
One hundred eighty / M3
& paise twenty only.
148.67
170.20
9.08
3689.10
One hundred seventy / M2
& paise twenty only.
Three thousand six / M3
hundred eighty nine
& paise ten only.
6.48
3963.77
8.
Providing R.C.C.M20 in up to 2.59
floor five level as per direction of
E/I.
3737.50
10.
Brick work with brick of class 4.89
designation 100A in all complete
1:6 as per direction of E/I.
Providing 100A brick in (1:6) in 59.93
super structure as per direction of
E/I.
3035.40
2.
3.
4.
5.
6.
7.
11.
12.
3377.10
Providing
reinforcement
for
R.C.C. work including cutting as
per direction of E/I.
(a)Mild steel 6mm dia plain rod
520.00
67.40
(b) TMTC -500 -10 mm dia
580.00
72.40
(C) TMTC-500 12 mm dia
1500.00
71.30
Three
thousand
seven hundred thirty
seven & paise fifty
only.
Three
thousand
seven hundred thirty
seven & paise fifty
only.
Three thousand thirty
five & paise forty
only.
Three thousand three
hundred
seventy
seven & paise ten
only.
/ M3
/ M3
/ M3
/ M3
Sixty seven & paise /kg
forty only.
Seventy two & paise /kg
forty only.
Seventy one & paise kg
thirty only.
Free tenders for Transformer by Government Of Bihar-3896131500
13.
14.
15.
16.
17.
18
19.
20.
21.
22.
Cement plaster in coarse sand of
mix (1:6) as per direction of E/I.
Finishing walls with water
proofing
cement
paint
of
approved brand and manufacture
and of required shade to give an
even shade as per direction of E/I.
Providing M S grill in window of
required pattern as direction of
E/I.
Providing and fixing 1mm thick
M.S. sheet door with frame of
40X40X6mm angle iron as per
direction of E/I.
Supplying, and fixing rolling
shutter of approved make all
complete as per direction of E/I.
Painting on wooden work with
ready mixed paint of approved
brand and manufacture in all
shades to give an even shade as
per direction of E/I.
Supplying and filling in plinth
with local sand as per direction of
E/I.
Providing and laying in position
cement concrete of specified
gradeM20 excluding the cost of
centring and shuttering all work
up to plinth level as per direction
of E/I.
52 mm thick cement concrete
flooring with metallic concrete
hardener topping under layer 40
mm thick cement concrete 1:2:4
(1cement :2 coae sand:4 graded
stone aggregate 20mm nominal
size) and top layer 12mm thick
metallic
concrete
hardener
consisting of mix 1:2 (1cement
hardener mix :2 stone aggregate 6
mm nominal size) by volume @ 2
liter per 50 of cement or as per
manufacture’s specification this
includes cost of cement slurry,
etc. but excluding the cost of
nosing of steps etc. complete as
per direction of E/I.
Providing,
precast
cement
concrete Jali 1:2:4 (1ceement:2
coae sand:4stone aggregate 6mm
Seventy two & paise / M2
ten only.
Forty seven & paise / M2
seventy only.
622.69
72.10
622.69
47.70
396.00
83.40
Eighty three & paise /kg
forty only.
12.56
2090.40
Two thousand ninety / M2
& paise forty only.
16.72
1764.40
70.28
51.00
One thousand seven / M2
hundred sixty four &
paise forty only.
Fifty one only.
/ M2
73.43
180.20
One hundred eighty / M3
& paise twenty only.
20.06
3588.90
Three thousand five / M3
hundred eighty eight
& paise ninety only.
131.64
297.70
Two hundred ninety / M2
seven
&
paise
seventy only.
2.92
471.00
Four
hundred / M2
seventy one only.
Free tenders for Transformer by Government Of Bihar-3896131500
23.
24.
25.
26.
27.
28
nominal size )reinforced with 1.6
mm dia mild steel wire including
roughening cleaning fixing and
finishing in cement mortar 1:3
(1cement :3 fine sand)etc.
complete excluding plastering of
the jambs, sills and soffits. As per
direction of E/I.
(i) Providing steel structures in
built of hot finished seamless P E
B trusses as per direction of E/I.
(ii) Wind tie- in size of 40X6mm
M.S. flat of approved quality as
per direction of E/I.
Providing P P G I coloured 0.5
mm thick corrugated sheets as per
direction of E/I.
Providing and fixing ridge in P P
G I sheet roofing as per direction
of E/I.
Providing shuttering and centring
for cement concrete work as per
direction of E/I.
a) band & beams
1333.30
90.00
Ninety only.
/kg
409.60
89.80
Eighty nine & paise /M
eighty only.
165.89
288.20
16.00
315.80
Two hundred eighty / M2
eight & paise twenty
only.
Three
hundred / M
fifteen
&
paise
eighty only.
122.67
173.20
b) Stiffener
79.00
260.60
Carriage cost of materials.
(a) Local sand (3 km)
(b) Sand (205 K.M.)
12.04
60.37
187.76
2081.20
(c) Stone chips(110 km)
57.11
2789.20
(b) Bricks.(8 km)
30570
529.76
Extra cost of materials.
(a) Bricks
30570
1464.20
(b) Cement.
714 bags.
38.67
One hundred seventy / M2
three & paise twenty
only.
Two hundred sixty & / M2
paise sixty only.
/ M3
Two thousand eighty / M3
one and twenty paise
only
Two thousand seven / M3
hundred eighty nine
and twenty paise
only
Five hundred twenty %o
nine & paise seventy
six only.
One thousand four %o
hundred sixty four
and twenty paise
only
Thirty eight and sixty /bag.
seven paise only
Free tenders for Transformer by Government Of Bihar-3896131500
9.
1.
2.
3.
4.
5.
Construction of P.C.C. Road
Items of work
Quantity.
W.B.M by manual means grade I
90mm to 45mm aggregate using
Screening cashable type such as
momoum or gravel with smooth
3 wheeled steel roller as per
direction of E/I.
W.B.M. by manual means grading
II 63mm to 45mm agg. Using
screening cashable type such as
mormum aggregate with smooth 3
wheeled steel
roller as per
direction of E/I.
WBM by manual means grading
III 53mm to 22.4mm aggregate
using screening cashable type
such as mormum or gravel with
smooth 3 wheeled steel roller as
per direction of E/I.
Compacting original
ground
supporting subgrade (loosening of
the ground up to a level of 500
mm below the subgrade level,
watered, graded and compacted in
laye to meet requirements of table
300-2
for
subgrade
construction.)rolling with smooth
wheeled roller as per direction of
E/I.
Cement
concrete
pavement
(Construction of un-reinforced,
dowel jointed plain cement
concrete payment over a prepared
sub base with 43 grade cement @
400 per cum, coae and fine
aggregate conforming to IS 383,
maximum size of coae aggregate
not exceeding 25mm, mixed in a
batching and mixing plant as per
approved mix design, transported
to site, laid with a fixed from or
slip
from
paver,
spread,
compacted
and
finished
101.13
Rate
in Rate in words.(Rs)
Unit
figures(Rs)
883.00
. Eight hundred / M3
eighty three only.
75.85
924.00
.
Nine
hundred / M3
twenty four only.
75.85
966.00
. Nine hundred sixty / M3
six only.
505.64
53.00
. Fifty three only.
202.26
4706.00
. Four thousand / M2
seven hundred six
only.
/ M3
Free tenders for Transformer by Government Of Bihar-3896131500
6.
7.
continuous operation including
provision
of
contraction,
expansion
construction
and
longitudinal joints, joint filer,
separation membrane sealant
primer, joint sealant, debonding
strip, dowel bar, tie rod,
admixtures as approved curing
compound, finishing to lines and
grade a per drawing) as per
direction of E/I.
Construction of subgrade and 202.26
earthen shoulder( Construction of
subgrade and excavation and
earthen shoulder with approved
material obtained from borrow
pits with all lifts & leads,
transporting to site, spreading,
grading to required slope and
compacted to meet requirement)
Rolling with smooth wheeled
roller as per direction of E/I.
Carriage cost of materials
(a) Stone chips (lead 110 KM.)
487.32
197.00
.One hundred ninety / M3
seven only.
2789.20
(b) Gravel (lead 110 KM.)
95.65
2789.20
(c) Sone Sand (lead 205 K.M.)
90.62
2081.20
(d) Earth ( 5 km)
202.26
206.64
1594
38.67
Two thousand seven
hundred eighty nine
and twenty paise
only
Two thousand seven
hundred eighty nine
and twenty paise
only
Two thousand eighty
one and twenty paise
only
Two hundred six and
sixty four paise only
Thirty eight and sixty
seven paise only
8.
Add. For extra cost of Cement.
10.
/ M3
/ M3
/ M3
/bag.
Construction of Brick drain in T.R.W., at Motihari,
Items of work
1.
/ M3
Quantity.
Earth work in excavation in 45.74
foundation trenches or drains (not
exceeding 1.5m in width or 10
sqm on plan) including dressing
of sides and ramming of bottoms,
lift upto 1.5m including getting
out the excavated soil and
Rate
in Rate in words.(Rs)
Unit
figures(Rs)
160.60
one hundred Sixty & / M3
paise sixty only.
Free tenders for Transformer by Government Of Bihar-3896131500
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
disposal of surplus excavated soil
as directed within a lead of 50 m.
as per direction of E/I.
Supplying, & filling in plinth with
local sand under floor including
watering, ramming, consolidation
and dressing complete as per
direction of E/I.
Providing designation 100A a B/F
soling as per direction of E/I.
Providing and laying in position
cement concrete of specified
gradeM15 excluding the cost of
centring and shuttering all work
up to plinth as per direction of
E/I.
Providing brick work (1:4) as per
direction of E/I.
12 mm cement plaster 1:3 (
1cement :3 coarse sand) finished
with a floating coat of neat
cement as per direction of E/I.
Providing R.C.C. drain cover as
per direction of E/I.
13.26
180.20
One hundred eighty / M3
& paise twenty only.
174.02
170.20
26.51
3137.90
One hundred seventy / M2
& paise twenty only.
.Three thousand one / M3
hundred thirty seven
& paise ninety only.
50.30
3230.00
356.00
117.60
32.08
3737.50
Three
thousand / M3
seven hundred thirty
seven & paise fifty
only.
Seventy two & paise /kg
forty only.
Reinforcement of R.C.C. work 2265.79
including straightening, cutting
,bending placing in position and
binding all complete T.M.T. Fc.
500-10 mm dia as per direction of
E/I.
Centring
and
shuttering 141.31
including strutting propping etc.
and removal of form for as per
direction of E/I.
Carriage cost of materials
(a) Local sand (5 km)
13.26
205.00
Two hundred five /M2
only.
187.76
(b) Sone Sand (lead 205 K.M.)
50.40
2081.20
(c) Stone chips (lead 110 KM.)
51.44
2789.20
(d) Bricks (8 K.M.)
25989.56
529.76
One hundred eighty
seven
&
paise
seventy six only.
Two thousand eighty
one and twenty paise
only
Two thousand seven
hundred eighty nine
and twenty paise
only
.Five hundred twenty
nine & paise seventy
six only.
Extra cost of materials.
72.40
. Three thousand two / M3
hundred thirty only.
.One
hundred / M2
seventeen & paise
sixty only.
/M3
/M3
/M3
%oNo
s
Free tenders for Transformer by Government Of Bihar-3896131500
(a) Bricks
25989.56
1464.20
(b) Cement.
629.75
38.67
One thousand four %o
hundred sixty four
and twenty paise
only
Thirty eight and sixty /bag.
seven paise only
Free tenders for Transformer by Government Of Bihar-3896131500
PART-B
( 1 ) TECHNICAL SPECIFICATION
TRANSFORMER OIL FILTER MACHINE -
Mobile oil filter machine fitted with tyres and wheels suitable for efficient treatment of oil by
combined effect of filteration, dehydration and degasification in medium vacume environment for
transformer and switchgear in power house and substation and switching stations for supply 415V, 3
ph.50 Hzs with standard accessories such as temp.gauge, vacuums gauge and compound gauge, safety
relief valve, centralized control panel, 10 mtr. Long hoses with end compling.
Technical specification
1.
2.
3.
4.
5.
6.
Capacity
Output litre/hour
Heater consumption KW
Avg. consumption of motor KW
Quantity of oil in filter system (Approx)
Net weight in Kg. (Approx)
Quantity indicated above in B.O.Q. is tentative. It may increase or decrease at the time of
placing order.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(2)Name of material:- H.T.Coil winding machine
H.T.coil winding machine made of cast iron having foot pedal for operation and gear
arrangement for change of speed inside the head stack of machine, counter with zero set with tail stock,
reel carrier, V-pulley, safety guard of belt lever for stepless adjustment or wire gauge with undernoted
technical specification
a)
b)
c)
d)
e)
f)
g)
h)
Range of wire
Maximum coil dia
Layer width
Distance with centres
Winding speeds approx
Maximum dia of face plate
Height of centres over floor
Motor output/speed/power
Supply (Motor of standard make
Like Crompton/Kirlosker etc.)
Make should be indicated
Clearly.
i) Starter
10SWG to 30 SWG
45 mm
15 to to 300 mm
480 mm
90,180 and 360 RPM
300 mm
1000 mm
1HP/1440 RPM/50Hz 3 Ph. A.C.
Push bottom starter of L&T make
A five figure retation counter meter with zero reset should be provided with
the machine. The machine should be completed with motor, starter, tail stcok, reel carrier, V-pulley, Vbelt safety guard of belt, levers for stepless adjustment of wire guage and precise setting of layer with
automatic/ manual reverses of wire at end of such layer.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(3)Name of material:- L.T.Coil winding machine
L.T.Coil winding machine for winding copper/Aluminium strips (Paper
covered/enameled/glass covered etc.) for distribution and power transformers. Robust vibration
proof construction all geared electrically operated winding machine with the arrangement to
instantaneously stop the machine. The machine should be completed with reel carrier, tailstock, 5-figure
reset turns counter meter, winding mandrel, motor, magnetic brack, reversing switch etc.
TECHNICAL SPECIFICATION FOR L.T.COIL WINDING MACHINE
a) Maximum coil diameter
1000 mm
b) Maximum distance between centres
1000 mm
c) Winding speed (approx)
16,32,64 RPM
d) Dia of face plate
450 mm
e) Height of centres over floor
975 mm
f) More taper tail stock
MT- 3
g) Load capacity between centre
400 kg.
h) Motor H.P./KW/RPM/AC
2/1.5/1440
i)
3
Phase
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(4)NAME OF MATERIALS: WELDING MACHINE
SPECIFICATION:
1
Supply Voltage
380-440 VAC
2
Phase
3
3
Frequency
50 Hz
4
Current Range
60 – 400
5
Open Circuit Vol
80 VAC
6
Insulation Class
H
7
Switch Recommend
TP 60 Amp
8
Type of Regulation
Stepless
9
Max. Welding Current@60% Duty
Cycle
400 Amp.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(5)Name of materials : Drill Machine
Drilling cap
25 mm
Column diameter
87.5 mm
Spindle centre to back distance
254 mm
Spindle nose to table distance
685 mm
Table travel
310 mm
Taper in spindle
m.T.3
Number of speed
8 speed
Range of speed
73x1980 rpm
Base size
360x370
Overall base size
600x390 mm
Spindle trevel
252 mm
Column length
1460 mm
Overall height with pully guard
1740 mm
V-belt section
B 52
Motor 1440 rpm 3 ph 440 volt
1 H.P.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(6)NAME OF MATERIALS: Shearing Machine(Board Cutting Machine)
TECHNICAL SPECIFICATION
Heavy duty in casted frame hand operated machine for cutting of Press
Board/Pre-compressed Board/Corrugated Board and plain paper. Foot
operated pressure clamp should be provided in the machine.
Machine size
: 52’’
Floor space
: 55’’x80’’
Machine Height
: 36’’
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(7)Name of materials : Spray painting Machine
Technical specification
Type
Medium Pressure
Output per cycle
150 cc
Air motor piston
190 mm
Stroke length
120 mm
Spray volume per minute
6 litr
Air inlet pressure Max
8 bar
Output pressure Max
320 bar
Air consumption ltr/cycle Max
6.6
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(8) TRIPOD FOR LIFTING OF TRANSFORMER
Made of telescopic steel pipe fitted with caster wheel suitable for lifting 5(five)
tone Dist.Transformer.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(9)CHAIN PULLEY BLOCK MORIS MAKE HVAVING CAPACITY
OF 5 MT
Chain pulley block must be tested for 50% overload with test
certificate from Govt./reputed approved test house.
NOTE
i)Chain pulley block will be preferred as per IS: 3832 and latest
relevant IS.
ii)The above specification are indicative in nature. Manufacturer
may offer equipment of superior technical specification.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(10)TECHNICAL SPECIFICATION AND B.O.Q. OF WEIGHING MACHINE
Technical Specification:Robust in construction to ensure a long life and correct weighing under the most rough possible
working conditions. Graduation on the clearly marked index plate without loose weights upto full
capacity Notch protection bar for minimize the wear of the machines. Smooth running poises inclined
for making easy and quick weighing.
Conforming to IS: 1435/60 with latest amendments thereof.
Lever system:- Levers and stool made of special quality cast iron fitted with hardened tested
steel knife edges and bearings enclosed in side the robust box frame.
PLATFORM :- Special quality cast iron boburst platform fitted with solid back rail which protest the
goods on the platform. Its size should be approx one M2.
LOCKING SYSTEM :- A locking device provided to keep the steel yard rigid when the scale is not in
use.
Capacity
- 1000 kg.Platform -1 M2
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(11) TOOLS & PLANTS
SL.NO
ITEMS
QTY.
1
HAMMER(5KG)
4 nos
2
Wrenched set
8 set
3
Pipe wrenched st
8 set
4
SCREW DRIVER
12 nos
5
PLIER
8 nos
7
CHISEL
4 nos
8
CROWBAR
4 nos
9
BLOW LAMP
4 nos
REMARKS
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(12)NAME OF MATERIALS : OIL BDV TESTING SET(MOTORISED)
FEATURES:
•
Oil Test Set is suitable for conducting oil breakdown test as outlined in IS 6792:1992.
•
Continuously variable out put voltages.
•
A Linear scaled A.C. rectifier Voltmeter marked kV to measure output voltage.
•
The out put voltmeter is with memory effect i.e even after HT supply trips off
due to the failure of equipment under test, the voltmeter continues to show the
voltage at which test piece has failed.
•
Test Cup with cover is made of Methyle Methacrylate (ACRYLIC) having oil
between 300 and 500 ml, with adjustable and removable mushroom head and
ground to adjust the Electrode gap distance.
•
Motorized cum Manual operation.
•
Powder coated steel cabinet with heavy duty handles
TECHNICAL SPECIFICATION
Out Put Voltage
0 – 100 KV
Display
A linear scaled a.c. rectifier voltmeter marked kv
to measure output voltage
Operating Temperature
00 C - 500C
Humidity
< 90% RH at 40 ºC
HV indication
Mains “ON” and H.T. “ON” Indication Lamp
Interlocking
Low/high level interlocking for drive motor HT
chamber door interlocking . Earth open
interlocking Reverse interlock
Protection
Quick acting DC Relay to isolate the HT
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(13)NAME OF MATERIALS : Automatic oil testing set
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION OF 100KV AUTOMATIC ELECTRIC STRENGTH
APPARATUS FOR TESTING OF TRANSFORMER OIL SAMPLES (B.D.V. TEST SET)
Sr
No.
Tender Specifications
Scope
1
The equipment offered shall be suitable for determination of electric strength (breakdown
voltage) of insulating oil upto 100kV when measured in accordance with IS: 6792/IEC 156.
2
Power Supply: 220/240 VAC, ±10%, 50/60 Hz (single phase)
3.
Type ; Fully Automatic microprocessor controlled,
4.
Output Range: 0-100KV
5
Accuracy : ± 3% ± 1digit
6.
Resolution : 0.4KV
7.
Output current: 10mA
8.
Transformer : 50-0-50KV with center earth epoxy molded air cooled.
9.
Method: All test conditions are to be preprogrammed as per different standards like IEC 156,
ASTM D877, ASTMD 1816, UNE21etc., and custom tests user programmable.
10.
Features: Operator defined test programme, custom tests, user programmable with stand proof
test , built in printer with timed and dated result.
11.
Display : Dot Matrix Large LCD to give alphanumeric information & KV test voltage. Storage
memory for 100 test results.
12
Open Ground protection shall be provided.
13
Safety Features zero start, double ground , cover interlock shall be provided on HV test chamber.
14
The Kit should have Auto & Manual Mode of operation, In automatic Mode all operations should
be controlled through internal micro-controller & in Manual mode operations such as Increase
/decrease voltage & Manual stirring should be controlled through switches/buttons manually.
These controls should be available on front panel.
15
Calibration: Traceable calibration certificate shall be provided along with the kit.
16.
The test cell shall be as per IS: 6792 suitable for BDV upto 100KV without external flash over.
17.
The unit shall be of composite type having control unit and high voltage transformer in a
common cabinet with necessary partition. HV chamber interlocking and zero start interlocking
Free tenders for Transformer by Government Of Bihar-3896131500
shall be provided.
18
The unit shall have motorized drive to increase voltage linearly as per the rate specified as per
various testing standards namely IEC156, ASTM etc. Provision should also be available for user
settable tests. The unit shall be automatic and complete with test cell, stirrer, and “GO” and “NO
GO” gauge for adjusting the gap. The software should have provision to enter the test
temperature.
19
The test set should give all the test results with standard deviation and a pass/ fail message
wherever necessary on screen and a built in printer.
20
The test cell transparent (vessel) electrodes, magnetic stirrer, electrode spacing guage (2.5mm),
instruction manual and calibration certificate, Foam padded aluminum carrying case to be
supplied with the kit.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(14)NAME OF MATERIAL :AUTOMATIC IR TESTER(MEGGER)
Technical Specifications for Microprocessor based IR Tester .
Sr No.
1
1A
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Tender Specification
The equipment should be portable microprocessor based , rugged and shall be free from
induction effects and suitable for operation in energized switchyard upto 400KV.
The equipment should be suitable for measuring IR, PI & DAR automatically.
Equipment shall be able to operate at
0 – 50 Dec. C ambient temperature
Equipment should be mains cum battery operated.
Insulation Resistance range : 0-500Gega Ohm
Accuracy: ± 5% of the reading
Supply Voltage :230VAC ± 10%, single phase, 50Hz.
Test Voltages: selectable 500V,1KV,2.5KV, 5KV
Accuracy: ± 2% of reading
Leakage Current Measurement Range: upto 2.5mA
Short circuit current: upto 2.5mA
Display: Large LCD panel.
The equipment should have inbuilt printer for printing test results with time & date.
The equipment should have storage memory for 100 test results.
The equipment should have RS232 / usb port to download data to PC.
The equipment shall be suitable for use in EHV environment
Suitably protected from induction voltages in the sub- station.
The equipment generally meant for carrying out testing at site and movement from one location
is unavoidable. Therefore the equipment shall be robust in design with necessary packing
arrangements so as to ensure desired performance in adverse conditions.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(15)NAME OF MATERIALS: HAND DRIVEN GENERATOR TYPE INSULATION
TESTER ( HAND DRIVEN MEGGER)
TECHNICAL SPECIFICATION
APPLLICATION:Insulation Tester should be a compact portable unit
incorporating most modern features used for direct reading of electrical operating
machines,Transformer,Industrial Installation,Cable,Electrical Component, wiring
and other devices capable of carrying the rated voltage.It should be a versatile
instruments in locating intermittent shorts defective electrical connections
insulation and conductor failure and preventing costly repairs & break down
insulation value.
BODY: Should be housed in Anti-magnetic aluminium body and Metalic Flap
over Glass window.
Scale Length
: 90mm(apporox.)
Rotation Speed
: 160 or more r.p.m.
Weight
: 2.5 kg. (approx.)
Dimension(in mm)
: 110x128x195(approx.)
Accuracy
: As per ISS:2992-1987
RANGES:
Volts
: 1000 V
Insulation Resistance Renges : 0- 2000 Megaohms
FEATURES:
Should be Accurate & Quick response,Confirms to ISS:2992/1987,High sensitive
cross coil indicator,Collapsible Driven Handle-fold back flush into casing when
not in use, Guard Terminal & externally accessible infinity adjuster are provided
for instrument having insulation range 2000 megaohms & above,Chuck nut
locking arrangement to prevent anti Clock – Wise Rotation, Centrifugal Clutch
for Constant Output Voltage.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(16)NAME OF MATERIALS : AVO METER(ANALOG MULTIMETER)
FEATURES
• Robust centre-pole meter movement
and a mirror arc enable accurate
readings to be taken, avoiding
parallax errors.
• Self-latching meter movement
reversal switch for making negative
polarity measurements.
• Fuse protection on all functions and
ranges for increased instrument and
user protection.
• User re-settable overload cutout
switch protects the instrument in
the event of operator error.
SPECIFICATIONS
Ranges
Voltage d.c.: 100 mV
(select 50 µA d.c. range)
/3/10/30/100/300/600/1000 V
Voltage a.c.: 3/10/30/100/300/600/1000 V
Current d.c.: 50/300 µA/1/10/
100 mA/1/10 A
Current a.c.: 10/100 mA/1/10 A
Resistance: 0 to 2 kΩ/0 to 200 kΩ/0 to
20 MΩ
Decibels: –10 to +55 dB using a.c.
voltage scale
Insulation Resistance: Up to 200 MΩ
using ohms scale and external
Free tenders for Transformer by Government Of Bihar-3896131500
150 V d.c. supply
Accuracy (at 20 °C)
Voltage and Current Ranges d.c.:
±1% of full-scale deflection
Voltage and Current Ranges a.c.:
±2% of full-scale deflection at 50 Hz
Resistance Ranges: ±5% of reading at
centre scale
Sensitivity
Voltage Ranges d.c.: 20 000 Ω/V all
ranges
Voltage Ranges a.c.
100 Ω/V: 3 V range
1000 Ω/V: 10 V range
2000 Ω/V: 30 V range and upwards
Voltage Drop at Terminals
Current Ranges d.c.: 100 mV at
50 µA, 350 mV at 300 µA, 390 mV at
1 mA, 400 mV at 10 mA, 410 mV at
100 mA, 490 mV at 1 A, 710 mV at 10 A
Current Ranges a.c.: 480 mV at
10 mA, 110 mV at 100 mA, 240 mV at
1 A, 390 mV at 10 A
Frequency Response
For 10V<V<300V:
additional frequency error
< ±3% for 15Hz<f<15kHz
Response Time
Typically 1 second to full scale
Magnetic Field Effect
Free tenders for Transformer by Government Of Bihar-3896131500
Variation due to external magnetic
fields is within the limits of BS 89
(1977) and IEC 51 (1973)
Temperature Range
Operation: –5 to +35°C
Storage: –40 to +50°C
Temperature Effect
Variation due to temperature change,
not greater than 0,15% per °C
Flash Test
7 kV a.c. rms
Overload Protection
High-speed electromechanical cutout
with a fuse on the two lower resistance
ranges and one in series with the
COMMON terminal
Fuses
1 A ceramic HBC, 32 x 6 mm
10 A ceramic HBC, 32 x 6 mm
(Belling Lee L693)
Batteries
One 1,5 V cell, IEC R20 type
One 15 V battery, IEC 10F15 using
Cat. No. 5210-064 adaptor supplied,
or IEC 10F20 without adaptor
Dimensions (excluding handle
and lugs)
192 H x 167 W x 115 D mm
(7,6 H x 6,6 W x 4,5 D in. approx.)
Weight
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(17)NAME OF MATERIALS : WATT METER(AC DIGITAL WATT METER)
1. FEATURES 3. ELECTRICAL SPECIFICATIONS ( 23± 5
)℃
The DIGITAL WATT METER give a direct reading of AC WATT (true power)
WATT value on 3 1/2 digits LCD display, five range Range Accuracy Resolution Overload Circuit
and functions give precision reading to the ACV, ACA, Protection
DCV, DCA and WATT. Then to NEW type of 2000W ± (1% + 1d) 1 W ACV : 600 ACV
performance that make them ideal for many 6000W ± (1% + 1d) 10 W ACA : 10 ACA
applications including industry, labs, service shop and * Input Voltage: 0 to 600 ACV
schools. It can be requiring to accurate current, * Input Current: 0 to 10 ACA
voltage, and true power measurement. * Frequency Characteristic: 45 Hz-65 Hz.
* Digital display, easy and correct read-out. * Accuracy spec. Tested on input voltage >60 ACA (60Hz).
* Reads true power, not apparent power.
* Use with single-phase power source. AC VOLTAGE
* DC 9 Volt batteries operated. Range Accuracy Resolution Overload Circuit
* In build low battery indicator. Protection
* LCD display provides low power consumption. 200 V ± (0.8%+1d) 0.1 V ACV : 600 ACV
* LCD display allow clear read-out even in bright ambient 600 V ± (0.8%+1d) 1 V DCV : ± 600 DCV
light condition. * Frequency Characteristic : 45 Hz - 65 Hz
* Compact, light-weight, and excellent for operation. * Converter Response :
* It is easy for one hand operation by pushing button. Average responding, calibrated to display RMS value
* Color-coded panel assures easy operation. of sine wave
* Input Impedance : 1 Mega ohm.
2. GENERAL SPECIFICATIONS
Display 0.5" LCD ( Liquid Crystal Display ), AC CURRENT
Max. indication 1999. Range Accuracy Resolution Max. Input
Measurement Watt ( true power ), Current
DCV, ACV, DCA, ACA. 10 A ± (1% + 1d) 10mA 10 A
Polarity Bi-polar by automatic Switching , * Voltage drop ( in case of full scale ) : 200 AC mV
" - " indicates reverse polarity. * Frequency Characteristic : 45 Hz -65 Hz
Free tenders for Transformer by Government Of Bihar-3896131500
Zero Adjust Watt : * Converter Response :
External adjustment for zero of the Average responding, calibrated to display RMS value of
display, limited to +30 to -30 digits. sine wave
ACV/DCV, ACA/DCA :
Automatic adjustment. DC VOLTAGE
Over-input Indication of "1" or "-1". Range Accuracy Resolution Overload Circuit
Operating Temp. 0 to 50 ( 32 to 122 ). ℃ ℃ ℉ ℉ Protection
Operating Less than 80% RH. 200 V ± (0.8%+1d) 0.1 V ACV : 600 ACV
Humidity 600 V ± (0.8%+1d) 1 V DCV : ± 600 DCV
Power supply 006P DC 9V battery. (heavy duty or * Input Impedance : 1 Mega ohm.
alkaline battery)
Power Approx. DC 6 mA DC CURRENT
Consumption Range Accuracy Resolution Max. Input
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(18)NAME OF MATERIALS : VOLT METER(AC DIGITAL VOLT METER)
This digital voltmeter measures AC voltage within 40mV-500V range.
Digital AC Voltmeter Features
•
•
AC voltage measurements within 4mV- 500V range
True RMS measurements
Digital AC Voltmeter Technical Specifications
Display
LCD, 157 × 36 mm
AC Voltage
Best accuracy
Range
4mV
40mV/400mV/4V/40V/500V
Power
Dimensions (H × W × D), mm
1KHz
200Hz~500KHz
10Hz~200Hz
500KHz~2MHz
(1%+15)
(1%+0.1)
(2%+0.1)
(0.5%+15)
(3%+20)
(5%+20)
220V ± 10% or 110V ± 10%
(50Hz ± 4%, 7VA)
370 × 222 × 106
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(19)NAME OF MATERIALS : AMETER(AC DIGITAL AM METER)
SPECIFICATION
Digital ammeter Digital Ammeter with LED
Display and Consumption of <3.2VA
Key Specifications/Special Features:
Conform to standard IEC51-1
Display: 3-1/2 digital LED display (red or green)
Accuracy: 0.5% +/- 3 digital
Operating temperature: -10 to +50 degrees
Storage temperature: -20 to +70 degrees
Consumption: <3.2VA
Heat resistance: case of non-combustible plastic material
Testing voltage: 2kV
Isolation resistance: 500V DC and 100M Ohms
Size: 96 x 48
Measurement range: AC current and multi-switchable
Ranges: 60/5A, 100/5A, 150/5A, 200/5A, 250/5A, 300/5A,
400/5A, 500/5A, 600/5A, 750.5A, 800/5A, 1000/5A,
1200/5A, 1500/5A and 1999/5
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
Name of material :Automatic Transformer Ratio Meter
(20)
Features
•
•
•
•
•
•
•
•
•
Fully auto operation, No balancing is required.
Measures and displays transformer ratio, excitation current, Phase Angle polarity( Primary Secondary,
Continuity or any short circuit )
LCD display.
4½ digit LED/LCD display of ratio.
True 4 terminal measurement.
Resolution of 0.001 in the range 10.
Can be used to measure 3,1 phase delta, star connected transformer.
Fully protected against any wrong connections.
Built in printer ( 24 column) for on-site printouts.
Specifications
POWER SUPPLY : 240V
AC, 50Hz, single phase.
TEST VOLTAGE : 48 V
& 4.8 V
AUTORANGING RANGES
Ratio Range
Display Resolution
Accuracy
10
1-9.999
±0.1% of FSd ±3
digit for ratio reading
100
10-99.99
1000
100999.9
10000
100010000
INDICATION
: 4 ½ Digit LED display of ratio. LCD display controlled by processor for interfacing
with keyboard.
ACCURACY
: ±0.1% of FSd ±3 digit for ratio reading at 48V test voltage.
PHASE ANGLE
: ± 90 0C
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(21)NAME MATERIAL:DIGITAL MULTIMETER
1.TRMS 4000 count LCD display with white back light
2.Designed with special purpose AISC which ensure high reliability.
3.Auto ranging
4.15 mins auto power off facility provided to save battery life.
5.highly linear reading.
6.AC/DC current to 20 A range
7. Resistance range 400 -40M
8. Capacitance range upto 4000µF
9. Selectable frequency and duty cycle measurement.
10.SELECT, RANGE, HOLD, REL, LIGHT, MAX/MIN measurement facility
11. Input impedance of 10M
.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(22)NAME OF MATERIALS : DIGITAL CLAMP METER
TECHNICAL SPECIFICATION
1.0
SCOPE
This specification covers the design, engineering, manufacture, testing at manufacturer’s works before
dispatch, packing, supply and delivery of Hand held AC/DC True RMS CLAMP METER
+MULTIMETER
2.0
suitable for load current measurement in 2 range measurement 400A, 1000A.
GENERAL & CONSTRUCTIONAL REQUIREMENTS
CLAMP METER
shall be designed and constructed in such a way so as to easy to operate
compact and rugged design, designed for user safety. However, the following General features should
be ensured
Feature Description
)The meter should have 3 ¾ Digits 4000 counts LCD Display.
)It should be Auto ranging with Auto/Manual range Selection function.
)It should True RMS for ACV & ACA measurement.
)It should have max. jaw size as 60mm.
)It should be able to measure AC as well as DC current through clamp.
)It should have over range indication.
)It should have Data Hold, and Relative Zero Mode.
9 Data Hold: To freeze the display at the push of a button.
9 Relative Zero Mode: To allow the user to offset the meter consecutive
measurements with the displaying reading as a reference value.
)The display will show readings relative to the stored reference value.
)It should have Overload Protection on all ranges.
)It should have water resistance front panel, fireproof heavy duty ABS casing.
)It should have Auto Power Off function.
)It should have battery access door for battery replacement without voiding calibration.
)It should have continuity check & diode test function.
)It should have frequency, capacitance & duty cycle measurement function.
3.0
•
INPUT POWER
Power supplied to this instrument should be through one 9 V battery type 6F 22 or
equivalent.
Free tenders for Transformer by Government Of Bihar-3896131500
Technical specification
Function
Volt DC
Ranges
400.0 mV, 4.000,
Resolution
0.1mV
± (0.5% of rdg +2 counts)
to ± (1.% of rdg +2 counts )
40.00,400.0,1000V
Volt AC
Accuracy
0.001V
± (1.2% of rdg +5 counts)
40.00mA, 400.0mA.
0.1µ A
± (1.2% of rdg +5 counts)
400.0A, 1000A
0.1A
± (2% of rdg +5 counts)
4.000V,40.00,400.0,1000V
400.0µA, 4000µA,
Current DC/AC
(Direct
CurrentInput)
DC/AC
(Through Clamp)
to ± (2% of rdg +8 counts )
400.0 OHM,4.000k OHM ,
0.1 OHM
to ± (3.5% of rdg +5 counts )
40.00k OHM ,400.0k OHM ,
Resistance
4.000M OHM ,40.00M OHM
50.00nF, 500.0nF, 5.000µF,
Capacitance
± (1% of rdg +5 counts)
0.01nF
± (3% of rdg +5 counts)
0.01Hz
± (1% of rdg +5 counts)
50.00µF
50.00Hz, 500.0Hz,
5.000kHz, 50.00kHz,
Frequency
Duty Cycle
1% to 99%
0.1%
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(23)NAME OF MATERIALS : LOW RESISTANCE METER(DIGITAL MICRO OHM
METER)
TECHINICAL SPECIFICATION
1.0
SCOPE
This specification covers the design, engineering, manufacture, testing at manufacturer’s
works before dispatch, packing, supply and delivery of DIGITAL MICRO OHM METER
MODEL LR 2065 suitable for
low resistance measurement of Cables,Components ,Relays,
PC Boards ,Bus Bars
,Contactors ,Weld Joints ,Electrodes etc .
2.0
CLIMATIC CONDITION
The DIGITAL Micro Ohm Meter to be supplied against this specification shall be
suitable for satisfactory operation under the following tropical conditions.
¾ Temperature range:
Operating: 5 o C ‐ 50 o C
Storage: ‐10 to 55 o C
¾ Humidity: Less than 80% at 27°C
3.0
TECHINICAL SPECIFICATION
The DIGITAL Micro Ohm Meter against this specification shall be suitable for satisfactory
operation under the following tropical conditions.
¾ The meter should works True 4 wire resistance measuring technique to
eliminate test lead resistance errors.
¾ The meter should have 4 ^ ½ Digit , 19999 Counts LCD display with annunciations.
¾ Meter should measure Low Resistance values from 2mΩ to 20 KΩ
¾ The meter should have test current of 10A on 2 mΩ range
¾ The meter should have higher resolution of Resolution 0.1 µΩ on 2 mΩ
¾ The meter should have resistance measurement accuracy of ± (0.03% + 4 Dgts)
over all ranges.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(24)NAME OF MATERIALS : HIGH VOLTAGE TEST SET
TECHNICAL SPECIFICATION
AC High Voltage test set capable of giving out put voltage 0 – 30 KV at 100 mA (3 KVA) capacity
for retention test on cable.
The unit shall be in two parts.:
(a)Control panel and regulating Transformer
(b)H.V. Transformer
The various functions of Control panel i.e. measurement, selection and adjustment, switching & protection
should be incorporated.
Input voltage
: 230 volts +/- 10% single phase 50 Hz. AC supply
Output voltage
: Contnuously Variable between o to 30 KV.
Capacity
: 3 KVA
Model
: Motorised
Timer
: 0 – 15 minutes windable timer with Timer by-pass switch.
Control
: (i)Manual Regulating Transformer to control the out put.
(ii)Selector switch to select current at 25/50/75/100 mA
Metering
: Voltmeter:- One moving iron panel type connected on HT side
to indicate the out put voltage.
Class of insulation : A class
Cooling
: Air cooled
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(25)NAME OF MATERIALS : DOUBLE VOLTAGE DOUBLE FREQUENCY TEST SET (DVDF
TEST SET)
TECHNICAL SPECIFICATION
Double Voltage Frequency Test Set input 400/415 Volts , 3 phase, 50Hz AC supply , out put 100Hz c/s for
testing inter turn insulation of transformers up to 500 KVA, 11/0.433 KV. .The equipement will consist of
the following :
10 HP induction Motor coupled with 15 KVA generator designed to deliver out put voltage 300 – 900 V
Input voltage
: 400/415, volts , 3 phase 50 Hz. AC
Output voltage
: 300 – 900 V
Capacity
: 15 KVA
Input Frequency
: 50 Hz
Output Frequency
: 100 Hz
Interlocking to ensure that field will energise when the motor has picked up the
speed .
Zero start interlocking.
MCB for input on/off.
Star Delta Starter with short circuit protection and single phasing protection.
Push button operated contactor for main supply.
Out put volts control from 300 to 900 volts.
The motor and Generator should be directly coupled and mounted on a
common platform made of M.S. Channel.The platform should be mounted on
Vibration pads.
THE TECHNICAL DETAILS OF MOTOR AND GENERATOR
MOTOR
Type
: Induction Motor
Capacity
: 10 HP
Connection
: Delta connected
Free tenders for Transformer by Government Of Bihar-3896131500
GENERATOR
Capacity
: 15 KVA
Output frequency : 100 Hz ± Hz
Output voltage
:
1000 V Phase to Phase
Connection
: Star
Type
: Fixed coupling
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(26)NAME OF MATERIALS : NO LOAD AND FULL LOAD
LOSS BENCH
TECHNICAL SPECIFICATION
No load and Full load loss of Distribution Transformers of capacity up to 500 KVA. The Test Bench will
have sumica top , angle Iron Frame aqnd M.S. sheet side panels. The Bench will be complete with the
following:i)
ii)
iii)
iv)
v)
vi)
vii)
viii)
ix)
x)
xi)
xii)
xiii)
xiv)
xv)
xvi)
Motorised oil cooled 3 phase Variable Transformer 60 A
Booster Transformer 415/900 V 3 phase oil cooled, 30 KVA
Main ON/OFF switch with Fuses.
3 Nos input ‘ON’ indicators
3 Nos C.T. Class 0.5
Range Selector Switch
Cicuit ON Switch
Out put ON Contactor
Out put ON/OFF/ Push Button
Out put MCCB 60 Amp
Circuit on Indicators
Zero Start interlocking
Push Button to increase / Decrease Voltage
Brass INPUT & OUTPUT Terminals
1 No PT, 3Phase , Class 0.5
Power Analyser
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(27)Kelvin Bridge
Specifications
•
•
•
•
•
•
Range - Wheatstone Bridge: 10Ω
to 1MΩ
Range - Kelvin Bridge: 0.0001Ω
to 100Ω
Accuracy: ± 0.1%
Galvanometer: Built in
Galvanometer Sensitivity: 3
µV/mm
Power: Built in Dry cells 6 x 1.5V
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(28) WIRE SLING ROPE
1
WIRE SLING ROPE 7 FT. 4 SETS
LENGTH ½” DIA
2
WIRE SLING ROPE 7 FT. 01 SET
LENGTH 3/4” DIA
3
WIRE SLING ROPE 7 FT. 01 SET
LENGTH 1” DIA
As per relevant IS
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(29)Hanged Fire Fighting Equipment(Temperature driven)
Specification
Max. filling
capacity(kg.)
Dimension(maximum)
11.50
350x500
Storage
Pressure(200C)
Quantity
6
1.6 MPa
23
400x540
3
It should be a specific advantage of reliable starting mode and can be connected with all the fire
alarm controllers, which have the function of signal feedback and finding the fire-alarm signals through the
heat detector and the smoke detector. Then Hanged fire fighting equipment will extinguish fire after
accepting the signals which the fire controller sends out. The equipment should be used in drying rooms,
substations, transformer rooms, all kinds of laboratories, especially oil depots, paint warehouses and
warehouses for small valuables. Besides, it is one of the indoor efficient automatic fire fighting equipment,
but only can be used for the protection zones of lesser space.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(30)Name of materials: Maxpull lifting machine
TECHNICAL SPECIFICATION
1)
Lifting (Maxpull) 5/8 MT Machine:-
Nos.
It should be standard make company of lifting capacity
5 MT and pulling 8 M.T. Dia of wire rope should be 16 mm.
Lifting Machine should conform IS : 5604 or latest.
NOTE:-Quantity indicated above are tentative. It may increase or decrease at the
time of placing order.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(31)Name of material: Double leg movable Gantry
Specifications
Capacities up to 10 tons.
Spans up to 36 feet.
Applications
Gantry cranes should be double leg r configurations. Rail along with bearing
plateshould be anchored to concrete slab or footing depending on capacity.
Motorized or manual push types available.
Full gantry cranes will be used when the addition of columns or runways is
undesirable. Common applications of gantry cranes include indoor and outdoor
storage facilities.
Standard Features
— End stop designed to stop hoist trolley from hitting leg assembly.
— Rigid Moment connection of leg to beam design eliminates the need
for interfering knee bracing.
— Base plate with mounting holes allow for lagging to floor or bolting on castors.
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
(32)
SL.NO
ITEM
TECH.
SPECIFICATION
1
COMPUTER
AS DETAILS BELOW
01
2
PRINTER
AS DETAILS BELOW
01
3
SCANNER
AS DETAILS BELOW
01
4
UPS
AS DETAILS BELOW
01
ITEM
QUANTITY
SPECIFICATION
COMPUTER
Intel Core i5Proccessor 2120, 2 GB DDR3 RAM, 500 GB SATA HDD, Intel
Graphics, DVD-RW, LAN, Optical Keyboard & Mouse, Card Reader, Dos, 18.5”
LED Monitor
PRINTER
Print speed up to 22 ppm, (A4)
Duty cycle up to 8000 pages per month
266 MHz with 8 MB RAM
Up to 600x600x2 dpi
High speed USB 2.0 port
SCANNER
48 bit Flatbed CCD scanner
1200x1200 dpi resolution
Widow /Mac support/Linux Driver support
Scan preview speed ‹ 10 sec
UPS
800 VA of standard make
Chief Project Manager
Free tenders for Transformer by Government Of Bihar-3896131500
PART-B
Bill of quantity of electrical works
ELECTRICAL MACHINERIES, TESTING & HOISTING ARRANGMENT,
FABRICATION WIRING AND LIGHTING ETC.
(A) Design, Engineering & Supply of Electrical machineries, testing equipments
hoisting arrangement etc., their installation, testing & commissioning in different
newly constructed TRWs under NORTH/SOUTH BIHAR POWER
DISTRIBUTION COMPANY LTD on turn key basis. A turnkey or a turnkey
project (also spelled turn-key) is a type of project that is constructed by a
developer and sold or turned over to a buyer in a ready to use condition. An
antonym being bespoke products.
1.
BILL OF MATERIALS FOR ONE DIST. TRANSFORMER REPAIR WORKSHOP
Sl.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Items for Distribution Transformer Repair
Workshop
Quantity
Oil Filter Machine 250 GPH
2
HV coil winding machine
4
LV coil winding machine (LT-200)
4
Welding machine 450 Amp
1
Drill machine 1” size
1
Press Board cutting machine
2
Spray Painting machine
1
Tipod suitable for tanking & dismantling up to
4 Set
5 Ton capacity
Chainpully block (Moris) 5 MT
5
Weighing machine 1 Ton capacity
1
Tools & Plants :5 Sets of each
Hammer, Screw Driver, Spanner, Chisel, Plier,
Crowbar, Pipe wrinch Etc.blow lamp etc.
Oil Testing Machine (Motorised)
2
Oil Testing Machine (Automatic)
1
Megger (Digital) 5 KV
2
Megger (Hand driven)
2
AVO Meter
2
Watt Hour Meter
2
Volt Meter
2
Amp. Meter
2
Ratio Meter (Automatic)
2
Electronic Multimeter
3
Electronic Tongue Tester
3
Electronic Low Resistance Meter
2
High Voltage Testing Machine
1
Free tenders for Transformer by Government Of Bihar-3896131500
25
26
27
28
29
30
31
32
DVDF testing set
No load and full load testing Bench
Kelvin Bridge
Wire Sling Rope 7” length of ½”/¾” & 1”
Fire fighting arrangement with accessories
1
1
1
2 Set each
Complete Set
for workshop
Maxpull (lifting 5 Ton)
2
Double leg mobile type gantry for crane for
3
loading & unloading
Computer with printer & scanner
1 Set
10.
Sl. No.
1
Bill of Quantity
Estimated Cost of
One Workshop
(in Rs)
Distribution Transformer Repair Workshop
73,11,000.00
B.
Detail Breakup of Estimated Cost
(i)
Fabrication, Wiring & Cable Work for Each Distribution Transformer
Repair Workshop
Sl. No.
Items
Qty.
Fabrication & Preparation of heating chamber
Industrial Wiring & Electrical fitting of the
proposed workshops :-
2
(i)
(ii)
Estimated
Amount (in Rs)
3 Nos of repairing sheds
Office and Store Sheds
Campus & Guard lighting etc.
(iii)
LT cable for 3 phase supply suitable for
carrying above electrical load at main board
Furniture and Almirah (Godrej Brand) etc :(i)
(ii)
(iii)
(iv)
Executive Table With Chair (3 sets)
Office Table & Chair (4 Sets)
Extra Chair (12 Nos)
Almirah- 4 Nos
Computer Table with Chair – One Set
(v)
Total Estimated Cost for One No.
A.E.(C)
E.E.(Civil)
S.E.(Civil)
18,90,000.00
Chief Engineer(C)
N.B.- This document is computer generated and does not require to be signed.
Signature of the tenderer.