www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Panel Meters
Automation & Control Gear
Panel Meters - contents
55 Control Gear & Switchgear
61
1269
Digital Voltmeters
1457
1457
1333
Digital Ammeters
1462
57 Fluid Management & Control
1372
DIN-Rail Mounting Panel
Meters
1463
58 Industrial Circuit Protection
1400
Multifunction
1463
Temperature Indicators
1465
Process Meters
1466
Power Meters
1468
Panel Meters
1471
56 Counters, Timers & Hour
Meters
59 Machine Guarding
60 Motors & Motor Controllers
1414
1436
62 PLCs, Industrial Networking
& Data Acquisition
1479
63 Signal Conditioning & Relay
Controllers
1489
64 Sensors & Transducers Factory Automation
1511
65 Sensors & Transducers Process Automation
1553
66 Sounders & Beacons
1580
67 Temperature Control &
Process Heating
1611
See our full range of Panel Meters from top brands online including:
rPower
rMoving Coil & Moving Iron
rDigital Volt & Digital Ammeters
rMultifunction
rTemperature
rProcess
1456
OM = Order Multiple
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Panel Meters
11mm, 3.5 Digit Meters
User-programmable decimal points
Auto zero, auto polarity
Display hold
Input leakage current: 10pA
Resolution: 100μV
Temperature stability: 150ppm/°C
Functions as an ammeter when used with a 200mV digital
current shunt
H36 x W72 x D24.5mm
Panel cut-out: 68 x 33mm
Depth behind panel: 20.5mm
LED 8 to 10mm Digit Height
8mm, 3.5 Digit, Snap-Fit
Low current LED display
Auto zero, auto polarity
Input current; 10pA
One-piece snap-fit
Programmable decimal points
Functions as an ammeter when used with a 200mV digital
current shunt
3 readings per second
Dimensions: H20 x W40 x D15.6mm
Depth behind panel: 13.6mm
Panel cut-out required: 38 x 18mm
Operating Voltage Range (Vdc)
Supply Current
Full Scale Deflection
Manu. Part No.
DPM 340
5
65 mA
200 mVdc
Stock no.
348-1238
Accuracy
LED Colour
Temperature Stability
Price per
unit
OM
S$
1+
89·00
Operating Voltage Range (Vdc)
Supply Current mA
Sample Rate
Full Scale Deflection
LED Colour
Operating Temperature Range
Temperature Stability
±0.1% (±1 Count)
Std Red
150 ppm/°C
S$
S$
Manu. Part No.
DPM 490
Stock no.
332-1912
Accuracy
LED Colour
Temperature Stability
Price per
OM
unit
S$
±0.01% (±1 Count)
Std Red
30 ppm/°C
S$
S$
1+ 225·00
8mm, 3.5 Digit Voltmeter
Auto zero, auto polarity
Resolution: 0.1mVdc
Selectable decimal points
Screw terminal connections
Supplied with mounting nut and rubber seal; IP67
protection
Dimensions: Ø38mm x 23.5mm depth
Panel cut-out: 32.5mm
Depth behind panel: 20.5mm
Operating Voltage Range (Vdc)
Supply Current
Full Scale Deflection
4.75 - 5.25
50 mA
200 mVdc
Manu. Part No.
Stock no.
EM32-1B-LED
455-4494
Price per
unit
Accuracy
LED Colour
Temperature Stability
OM
S$
0.1% (± 1 Count)
Std Red
150 ppm/°C
S$
S$
1+ 102·50
Programmable decimal points
Serial data input
Drives up to 4 external LEDs
Round metal bezel
IP67 protection
Dimensions: Ø38 mm x 32.5mm depth
Panel cut-out: 32.5mm
Depth behind panel: 20.5mm
4–9
20 mA
LED Colour
Price per
OM
Operating Voltage Range (Vdc)
Sample Rate
Manu. Part No.
DMS-30PC-0-GS-C
DMS-30PC-0-RS-C
DMS 30PC-1-RS
DMS-30PC-2-RS-C
EM32-4-LED
Stock no.
533-0508
unit
Std Red
S$
S$
S$
Manu. Part No.
SP300-BLUE
Stock no.
223-183
S$
S$
5 (±5%) V(dc)
2.5 readings/s
Stock no.
Price per
0 to +60 °C
100
Stock no.
163-6199
163-6290
163-6307
163-6313
Operating Temperature Range
Supply Current mA
Full Scale Deflection
+/-200 mV
+/-200 mV
+/-2 V
+/-20 V
OM
S$
DMS-30PC-0GS-C
DMS-30PC-0RS-C
DMS 30PC-1-RS
DMS-30PC-2RS-C
Green
a163-6199
unit
1+ 114·00
Red
a163-6290
unit
1+ 114·00
Red
Red
163-6307
163-6313
unit
unit
1+ 108·50
1+ 108·50
S$
S$
14mm, 3.5 Digit Meter
SP8-100
5 (±5%)
50
2.5 Readings per sec
200 mVdc
Stock no.
533-0514
Price per
unit
LED Colour
Operating Temperature Range
Supply Current
OM
S$
S$
Red
0 to +50 °C
50 mA
S$
1+ 143·00
1+ 119·00
19mm, 4 Digit Meter
Operating Temperature Range 0 to +50°C.
High contrast red LED display
Single rail supply, suitable for single ended, differential and
floating input measurement
Programmable decimal points
Auto zero, auto polarity
Input leakage current 10pA
Dimensions: H39 x W71.5 x D21mm
Panel cut-out: 72 x 40mm
Depth behind panel: 6.5mm
Rated to IP67
Supplied with: IDC ribbon cable connector, plastic bezel and window.
9.4mm (0.37in.) digit height
Blue LED display
200mVdc full scale reading
50mA @ +5Vdc power supply
Auto zero and auto polarity
Programmable decimal points
Simplified connection
Splash proof
Supplied with: Splash Proof Seal and Fixing Clip.
5 V dc
50 mA
±200 mV
S$
1+ 114·00
LED Colour
Operating Voltage Range (Vdc)
Supply Current mA
Sample Rate
Full Scale Deflection
3.5 Digit LED Voltmeter Module
SP300-Blue
Supply Voltage
Supply Current
Full Scale Deflection
OM
Manu. Part No.
Manu. Part No.
Manu. Part No.
Price per
unit
200mVdc full scale deflection
50mA at +5Vdc power supply
Auto zero and auto polarity
Programmable decimal points
Temperature stability: 150ppm/°C
Bright red LED display
Dimensions: 55.1x23.4mm
Depth behind panel: 19mm
Panel cut out: 53.1x21.4mm
8mm, 4 Digit Meter
Operating Voltage Range (Vdc)
Supply Current
257-206
Auto-zero, auto-polarity
Excess voltage protection: ± 250V
maximum
No external components; ideal for
portable instrumentation
Bezel available, see 176-4193
Voltmeter digital modules available
see stock nos. 163-6492 and 1636559
Fitted without screws, panel or PCB
H23.5 x W55 x D20mm
Panel cut-out: 53.8 x 22.3mm
Depth behind panel: 19.6mm
Programmable decimal points
Auto zero, auto polarity
Integral negative supply line for common mode measurements
10-pin, 2.54mm pitch pin header
Dimensions: H36 x W72 x D38mm
Panel cut-out: 68 x 33mm
Depth behind panel: 34mm
5 - 5.5 V
120 mA
2 V dc
Stock no.
DPM 40
14mm, 3.5 Digit Meter
10mm, 4.5 Digit, DIN Case
Operating Voltage Range (Vdc)
Supply Current
Full Scale Deflection
Manu. Part No.
61
4.5 - 5.5 V(dc)
100
3 readings/s
200 mVdc
Red
0 to +50 °C
150 ppm/°C
Accuracy
LED Colour
Temperature Stability
Price per
unit
±0.1% (±1 Count)
Std Blue
150 ppm/°C
OM
S$
1+
74·00
LED 11 to 19mm Digit Height
S$
S$
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Manu. Part No.
DPM 959B
4.5 - 5.5
50 mA
2.5 Readings per sec
200 mVdc
Stock no.
455-4450
Price per
unit
Accuracy
Resolution
Temperature Stability
OM
S$
1+
95·00
0.1% (± 1 Count)
0.1 mV
150 ppm/°C
S$
S$
Accessories
All meters have an accuracy of ±0.1% ( ± 1 count).
Visit our website for additional price information and exciting promotions
1457
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Panel Meters
Description
Description
IP67 protective bezel for DTM995
Stock no.
Price
per
OM
S$
332-1906
unit
1+
46·60
S$
S$
9.4mm 3.5 Digit, Two-wire AC Line
Voltage Monitoring Meter
85 - 264
50 mA
2.5 readings/s
1V
Manu. Part No.
Stock no.
DMS-20PC-1-LM-C
OM
unit
85 → 264
± 2V
-25 → +60
S$
OM
S$
OM
S$
1+ 116·00
Accessories
Description
Stock no.
Bezel
176-4200
Price per
unit
OM
S$
1+
7·65
S$
S$
9.4mm 3.5 Digit, DC Voltage
Monitor
Stock no.
221-2845
a254-9131
254-9119
254-9125
Price per
unit
unit
unit
unit
OM
S$
S$
S$
Stock no.
176-4200
Price per
unit
OM
S$
1+
7·65
Price per
OM
unit
S$
S$
S$
1+ 108·00
Single (5Vdc) supply operation
Front or rear panel mounting
Ultra-low profile
Auto-zero, auto polarity
Programmable decimal points
LED backlight: 40mA
Input leakage current: 10pA
Low battery warning
Re-usable ’ratchet’ fixing clip
Dimensions: 22.4 x 35.1 x 18.91mm; panel cut-out: 34 x
21.3mm
Supplied with: rubber sealing gasket.
3.5 → 5.25
350 μA
3 Readings per sec
200 mVdc
Stock no.
399-0209
Price per
Accuracy
Resolution
Temperature Stability (Zero Drift)
OM
S$
1+
71·00
unit
S$
±0.1 %
0.1 mV
100 ppm/°C
S$
Price per
Single or Dual supply operation
Front or rear panel mounting
Ultra-low profile
Auto-zero, auto-polarity
Programmable decimal points
LED backlight: 40mA
Input leakage current: 10pA
Low battery warning
Re-usable ’ratchet’ fixing clip
Size: 22.4 x 35.1 x 16.8mm; panel cut-out: 34 x 21.3mm
Supplied with: rubber sealing bracket.
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Manu. Part No.
3 to 7.5, 6 to 15
350 μA / 175 μA
3 Readings per sec
±200 mVdc
Stock no.
399-0186
Price per
unit
Accuracy
Resolution
Temperature Stability (Zero Drift)
OM
S$
1+
64·00
Manu. Part No.
SP 5-1200-BL
Stock no.
455-4466
Price per
unit
OM
S$
1+
89·00
3.5 Digit LCD Voltmeter Module,
SP400-Blue
OM
±0.1 %
0.1 mV
100 ppm/°C
S$
S$
S$
S$
Operating Voltage Range (Vdc) 3-50
Full Scale Deflection 4 to 25 V dc
Supply Current
1 mA
Accuracy
+/-0.2 V
Sample Rate
3 Readings per sec Resolution
100 mV
Operating Voltage Range 170 - 264
Full Scale Deflection
47 to 99 Hz
(V ac)
Supply Current
50 mA
Accuracy Specification ±0.1 Hz
Sampling Rate
4 readings/s Operating Temperature -25 to +60 °C
Range
Resolution
0.1 Hz
S$
OM
1+ 113·00
Accessories
1458
455-4488
±0.1 %
0.1 mV
±100 ppm/°C
Reverse polarity protection
No calibration required
LED backlight (separate 5V @ 50mA dc supply)
Screw terminal connections
Dimensions: 48x 36 x 7.5mm; panel cut-out: 47 x 35mm
Supplied with: splash proof seal.
Self-powered; no external supply required
Large easily readable LED display
Reads true line frequency to ±0.1Hz
Screw terminal connection
Epoxy encapsulated for harsh environments
Dimensions: H22.4 x W35.1 x D25.4mm
Panel cut-out: 33.9 x 21.3mm
unit
Stock no.
Accuracy
Resolution
Temperature Stability
18mm, 3 Digit Signal Powered Meter
10.2mm 3-Digit, Two-wire AC Line
Frequency Monitor
307-5445
3.5-6.5; 7.5-14
500; 150 μA
2.5 readings per sec
200 mVdc
9.5mm 3.5 Digit Voltmeter Module –
12 Pin
SP 400
1+ 59·00
1+ 115·00
1+ 103·50
1+ 111·00
Accessories
Stock no.
7·65
S$
9.5mm 3.5 Digit Voltmeter Module – 9
Pin
Height
Length
Depth Behind Panel Overall Depth
Panel Cut Out
(mm)
(mm)
(mm)
(mm)
(mm)
221-2845
22.4
35.1
15.8
16.8
33.93 x 21.29
254-9131, 254-9119, 254- 22.4
35.1
24.4
25.4
33.93 x 21.29
9125
Sample Rate
2.5 readings/s
Operating
Supply Resolution Full Scale
Operating
Manu. Part No.
Stock no.
Voltage Range Current
(V)
Deflection Temperature
(Vdc)
(mA)
(V)
Range (°C)
6.5 - 18.0
3
0.01
6.5 to 18
0 to +60
DMS-20LCD-0-DCM-C 221-2845
2.00 - 6.00
80
0.01
2 to 11
-25 to +60 DMS-20PC-3-DCM-C
254-9131
4.50 - 19.99
13
0.01
4.5 to 19.99
-25 to +60 DMS-20PC-0-DCM-C
254-9119
8.0 - 40.0
13
±0.1
8 to 50
-25 to +60 DMS-20PC-1-DCM-C
254-9125
Bezel
EM 32-1B
SP 200
stock no.
Description
Manu. Part No.
Manu. Part No.
Dimensions (mm)
LCD 6.5 - 18Vdc
LED 2 - 6Vdc
LED 4.5 - 20Vdc
LED 8 - 40Vdc
1+
unit
S$
8mm, 3.5 Digit LCD Voltmeter
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Self-powered; two
connections required
Ideal replacement for
analogue panel meter
Reverse polarity
protected
Rugged ABS case
Low power consumption
Dimensions: 22.4 x 35.1 x
25.4mm, panel cutout 21.3 x
34.0mm
Description
S$
All have an operating temperature range of 0 to 50°C.
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Full Scale Deflection
Accuracy Specification
Operating Temperature Range
Price per
176-4171
176-4200
OM
Auto-zero, auto-polarity
Selectable decimal points
Input leakage current 10pA
Screw terminal connections
Diameter 40mm; panel cut-out dia. 32.5mm
Note: Default supply voltage 3.5-6.5Vdc, configurable for 7.514Vdc operation.
Supplied with: mounting nut and rubber seat to achieve
IP67 protection.
Easy to connect meters for supply monitoring
Ideal replacement for analogue meter
Self-powered with two screw-terminal connections for readings or
supply voltages
The 9.4mm 3.5 digit, two-wire AC line voltage monitoring meter reads
true line measurements
Splash proof case
AC voltage frequency meter display AC voltage frequency between 170
and 264Vac
Dimensions: H22.4 x L35.1 x D18.47mm
Depth behind panel: 17.45mm
Panel cut-out: 33.93 x 21.29mm
Operating Voltage Range (V ac)
Supply Current
Sample Rate
Resolution
Price per
LCD 5.5 to 18mm Digit Height
LED/DIN Case 9.4 to 14.2mm Digit Height
61
Bezel
Stock no.
OM = Order Multiple a New product to range
S$
OM
S$
9.7mm (0.38in.) digit height
Blue LCD backlight
200mVdc full scale reading
3 to 7Vdc or 6 to 15Vdc operation
Auto-zero and auto-polarity
Programmable decimal points
Low battery warning
Splashproof
Supplied with: Splashproof seal and fixing clip
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Operating Voltage Range
Supply Current
Sample Rate
Full Scale Deflection
Manu. Part No.
SP400-BLUE
Panel Meters
3 to 7 (or 6 to 15) Vdc
350μA (or 175 μA)
2.5 per sec.
±200 mV
Stock no.
223-199
Price per
unit
Accuracy
Resolution
Temperature Stability
OM
S$
1+
61·50
±0.1% (±1 Count)
0.1 mV
100 ppm/°C
S$
S$
Integral carrier and window, with separate mounting bezel
Temperature stability zero drift 100 ppm/°C
3.5 - 7 Vdc operating voltage range
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Manu. Part No.
LCD 5.5 to 19mm Digit Height
DPM702S
700 μA
3 Readings per sec
200 mVdc
0.1 %
100 μV
Stock no.
344-1195
Height
Length
Depth Behind Panel
Overall Depth
Panel Cut Out
Price per
OM
unit
S$
30 mm
60 mm
3 mm
5.5 mm
62 x 32 mm
S$
S$
61
1+ 122·00
All have an operating temperature range of 0 to 50°C unless specified otherwise.
5.5mm, 3.5 Digit, Sub-miniature
12.5mm, 3.5 Digit, Low Power
One piece snap-in design
Low power consumption
Auto-zero, auto-polarity
Programmable decimal points
LED backlight
Functions as ammeter when used with a 200mV digital
current shunt
3 to 7.5Vdc power supply to measure an input voltage
referenced to meter supply ground or 6 to 15Vdc to measure an input voltage which is floating with
respect to meter supply
Single-in-line connection
Temperature stability zero drift 250 ppm/°C
Backlighting:
DPM 1AS-BL 15mA @ 5Vdc (typ.)
Low battery power indication
Logic selectable decimal point
Digital hold version (stock no. 260-268)
LED backlit version (stock no. 307-6375)
Backlight voltage; 7.5V to 10V, backlight current; 60mA
max.
Extra large display in a miniature package
Plugs directly into a 12-pin 0.1in pitch single in line socket
Functions as ammeter when used with a 200mV digital
current shunt
Temperature stability zero drift 100 ppm/°C
7.5 - 14 Vdc operating voltage range
Supplied with: snap-in bezel and window.
Operating Voltage Range
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Manu. Part No.
DPM 1AS-BL
3-7.5/6-15
350μA (3-7.5V)
175μA (6-15V)
2.5 Readings per sec
200 mVdc
0.1 %
0.1 mV
Stock no.
419-9328
Price per
unit
Height
Length
14 mm
30 mm
Depth Behind Panel
Overall Depth
Panel Cut Out
13.6 mm
15.6 mm
28.4 x 11.4 mm
OM
S$
1+
75·00
S$
S$
8.25mm, 3.5 Digit, Sub-miniature
One piece snap-in design
Low power consumption
Auto-zero, auto-polarity
Programmable decimal points
LED backlight
Functions as ammeter when used with a 200mV digital
current shunt
3 to 7.5Vdc power supply to measure an input voltage
referenced to meter supply ground or 6 to 15Vdc to measure an input voltage which is floating with
respect to meter supply
Single-in-line connection
Temperature stability zero drift 250 ppm/°C
Backlighting:
DPM 2AS-BL 15mA @ 5Vdc (typ.)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Manu. Part No.
DPM 2AS-BL
350μA (3-7.5V)
175μA (6-15V)
2.5 Readings per sec
200 mVdc
0.1 %
0.1 mV
Stock no.
419-9334
Price per
unit
Height
17 mm
Length
Depth Behind Panel
Overall Depth
Panel Cut Out
35 mm
13.6 mm
15.6 mm
33 x 15 mm
OM
S$
1+
78·00
S$
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Manu. Part No.
DPM 3AS-BL
Stock no.
419-9340
Price per
unit
DPM 116
DPM 125
DPM 125-BL
Height
20 mm
Length
Depth Behind Panel
Overall Depth
Panel Cut Out
40 mm
13.6 mm
15.6 mm
38 x 18 mm
S$
1+
83·00
6.4mm, 3 Digit Dual Channel Meter
Adjustable annunciators
For applications where two readings e.g. current/voltage or
temperature/humidity are required
Auto-zero, auto-polarity
Selectable decimal points
Single rail input
Input leakage current; 1pA (typ.), 10pA (max.)
Plugs directly into a 10-pin single in line socket
260-268
257-212
307-6375
Price per
unit
unit
unit
OM
S$
1+
1+
1+
81·50
76·00
86·50
24 mm
48 mm
8.5 mm
10 mm
45 x 22 mm
S$
S$
12.5mm, 4.5 Digit Meter – Dual Rail
Input
Low battery power indication
Band gap referenced for accuracy
Digital hold facility
Outputs provided for auto-ranging applications
Plugs directly into a 20-way 0.1in. pitch single in line
socket
Functions as ammeter when used with a 200mV digital
current shunt
Temperature stability zero drift 30 ppm/°C
Supplied with: a snap-in bezel and window.
Operating Voltage Range
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Manu. Part No.
DPM 160
6-14 V
1 mA
1.6 Reading per sec
200mVdc, 2 V dc
0.01 %
10/100 μV
Stock no.
106-4875
Digit Height
Height
Length
Depth Behind Panel
Overall Depth
Panel Cut Out
Price per
OM
unit
S$
12.5 mm
30 mm
60 mm
8.2 mm
9.3 mm
57 x 27 mm
S$
S$
1+ 170·00
Twelve optional symbols, V, m, A, °F, °C, μ, M, k, Ω, Hz, ∼,:
Selectable decimal points (may be hard wired)
Outputs available for auto-ranging applications
Integral carrier and window, with separate mounting bezel
Electrical connections via a row of solder pads on the PCB
Backlight voltage; 5V and 9V
Backlight current; 50mA and 20mA
Functions as ammeter when used with a 200mV digital
current shunt
S$
S$
3.5 → 7.5
500 μA
3 readings/s
200 mVdc
0.1 %
100 μV
62 x 32 mm
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Panel Cut Out
Manu. Part No.
OM
Stock no.
Height
Length
Depth Behind Panel
Overall Depth
Panel Cut Out
12.7mm, 3.5 Digit Green Back Lit
Meter - Single Rail Input
One piece snap-in design
Low power consumption
Auto-zero, auto-polarity
Programmable decimal points
LED backlight
Functions as ammeter when used with a 200mV digital current
shunt
3 to 7.5Vdc power supply to measure an input voltage
referenced to meter supply ground or 6 to 15Vdc to measure an input voltage which is floating with
respect to meter supply
Single-in-line connection
Temperature stability zero drift 250 ppm/°C
Backlighting:
DPM 3AS-BL 40mA @ 5Vdc (typ.)
350μA (3-7.5V)
175μA (6-15V)
2.5 Readings per second
200 mVdc
0.1 %
0.1 mV
Manu. Part No.
150 μA
3 Readings per sec
200 mVdc
0.1 %
100 μV
12.5 mm
S$
11mm, 3.5 Digit, Sub-miniature
Supply Current
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Digit Height
DPM 700S
Stock no.
260-246
Price per
unit
Temperature Stability
Digit Height
Height
Length
Depth Behind Panel
Overall Depth
Panel Cut Out
OM
S$
30 ppm/°C
12.7 mm
37.5 mm
60 mm
3 mm
5.5 mm
62 x 32 mm
S$
S$
1+ 121·50
12.7mm, 3.5 Digit Green Back Lit
Meter - Dual Rail Input
Twelve optional symbols, V, m, A, °F, °C, μ, M, k, Ω, Hz, ∼,:
Selectable decimal points (may be hard wired)
Outputs available for auto-ranging applications
Integral carrier and window, with separate mounting bezel
Electrical connections via a row of solder pads on the PCB
Backlight voltage; 5V and 9V
Backlight current; 50mA and 20mA
Functions as ammeter when used with a 200mV digital current
shunt
Operating Voltage Range (Vdc)
New products available online every week
5 → 14
Supply Current
150 μA
1459
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Panel Meters
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Panel Cut Out
Temperature Stability
3 readings/s
200 mVdc
0.1 %
100 μV
62 x 32 mm
30 ppm/°C
Manu. Part No.
Stock no.
DPM 700
255-979
Digit Height
Height
Length
Depth Behind Panel
Overall Depth
Panel Cut Out
Price per
OM
unit
12.7 mm
37.5 mm
60 mm
3 mm
5.5 mm
62 x 32 mm
S$
S$
S$
1+ 115·50
3.0 to 7.5V or 6.0 to 15.0Vdc operation
LED green backlit display (30mA @ 5V typ.)
Auto-zero, auto-polarity
Programmable decimal points
Optional waterproof (IP67 rated), alloy bezel (stock no.
446-2165)
3-7.5, 6-15
500μA (3-7.5V), 350μA (6-15V)
2.5 readings/s
200 mVdc
0.1 %
0.1 mV
62 x 32 mm
Manu. Part No.
Stock no.
DPM 750S-BL
446-2159
Price per
OM
unit
Temperature Stability
Digit Height
Height
Length
Depth Behind Panel
Overall Depth
Panel Cut Out
S$
S$
30 ppm/°C
12.7 mm
34.5 mm
64.5 mm
11.1 mm
17.2 mm
62 x 32 mm
S$
1+ 103·00
19mm, 3.5 Digit Meter- Single Rail Input
Auto-zero, auto-polarity
Low battery power indication
Logic selectable decimal points
LED green backlit display for low light viewing
Backlight current: 50mA
Functions as ammeter when used with a 200mV digital
current shunt
Optional waterproof (IP67 rated) alloy bezel (stock no. 3321906)
Supplied with: IDC ribbon cable connector, mounting bezel and window
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Panel Cut Out
Manu. Part No.
3.5-6.5
500 μA
3 readings/s
200 mVdc
0.1 %
100 μV
72 x 40 mm
Stock no.
DPM 950 S
106-0031
Price per
unit
S$
DPM 950S-FPSI
667-3991
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Panel Cut Out
Manu. Part No.
DPM 970
100 ppm/°C
19 mm
44 mm
76 mm
6.5 mm
8.5 mm
72 x 40 mm
S$
S$
BEZ 900-IP
Stock no.
203-978
Price per
OM
S$
100 ppm/°C
19 mm
44 mm
76 mm
6.5 mm
8.5 mm
72 x 40 mm
S$
S$
1+ 114·00
1460
Accuracy
Dimensions
Sampling Rate
OM = Order Multiple
Stock no.
332-1855
Price per
unit
Temperature Stability
Digit Height
Height
Length
Depth Behind Panel
Overall Depth
Panel Cut Out
OM
S$
200 ppm/°C
19 mm
44 mm
76 mm
6.5 mm
8.5 mm
72 x 40 mm
S$
S$
S$
S$
S$
S$
1+ 162·00
Stock no.
446-2165
Price per
unit
OM
S$
1+
35·70
Stock no.
332-1906
Price per
unit
OM
S$
1+
46·60
12.7mm, 3.5 Digit Back Lit Voltmeter
Auto zero, auto polarity
Electrical connection via a row of connection pads on the PCB
Backlit, making it suitable for 10W ambient light conditions
Backlight; 40mA@5Vdc
Battery power low indication
Outputs available for auto-ranging applications
Use 200mV current shunt to convert the meter to an ammeter
Optional mounting bezel available
Dimensions: HxWxD 30 x 60 x 16 mm
Depth behind panel 5.7mm
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
A standard 3.5 digit voltmeter that can be used as a dual
colour stop/go display. During standard operation the
display is green, however if the reading goes outside a
programmable threshold the display will turn red.
200mV FSD
Linearity ±1 count
Auto-zero, auto-polarity
Dual colour backlight with programmable high and low
levels (backlight current is 35mA at 5V Nom.)
Open collector outputs that mirror the backlight status
6 way DIP switch and 2 push button set up
16 way IDC cable header
Panel cut-out 40 x 72 mm
Note: Dimensions stated include bezel, module dimensions only are 39 x 71.5 x 11.3mm (excluding
pins at 8.4mm).
Supplied with: Mounting bezel / accessories, operating instructions and connector.
3.5
5 V dc
500 μA
7.5-14
1.5 mA
3 readings/s
500 V ac
1.5 %
1V
72 x 40 mm
All have a full scale deflection of 200mVd.c. and user selectable decimal points. All have an operating
temperature range of 0 to +50°C unless specified otherwise.
19mm 3.5 Digit Meter with Bicolour
Alarm Backlight
Number Of Digits
Voltage Rating
Current Rating
1+ 131·00
LCD 5.5 to 12.7mm Digit Height OEM
Applications
Temperature Stability
Digit Height
Height
Length
Depth Behind Panel
Overall Depth
Panel Cut Out
unit
S$
Provides front face sealing to IP67/NEMA 4X
Direct replacement for standard bezels
Screw fixing
Panel cut-out: 72x40mm
Suitable for use with 19mm, 3.5 digit meters
Manu. Part No.
DPM 950
S$
Plated Alloy Bezel
Auto-zero, auto-polarity
Low battery power indication
Logic selectable decimal points
LED green backlit display for low light viewing
Backlight current: 50mA
Functions as ammeter when used with a 200mV digital
current shunt
Optional waterproof (IP67 rated) alloy bezel (stock no. 3321906)
Supplied with: IDC ribbon cable connector, mounting bezel and window
Manu. Part No.
unit
S$
Provides front face sealing to IP67/NEMA 4X
Direct replacement for standard bezels
Screw fixing
Alloy and glass construction
Panel cut-out: 57x27mm
Suitable for use with 12.7mm, 3.5 digit meter
BEZ 700-IP
1+ 128·50
7.5-14
150 μA
3 readings/s
200 mVdc
0.1 %
100 μV
72 x 40 mm
OM
Alloy Bezel
19mm, 3.5 Digit Meter- Dual Rail Input
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Panel Cut Out
Price per
Panel mounted
Backlight function (current 50mA)
Frequency range input voltage: 15kHz
Auto-zero, auto-polarity
Screw terminal connection
Dividing bridge measurement of voltage and current at ac
voltage and current terminals
External scale resistors required for voltage measurement
above 500Vrms
Optional waterproof (IP67 rated) alloy bezel (stock no. 332-1906)
Manu. Part No.
Temperature Stability
Digit Height
Height
Length
Depth Behind Panel
Overall Depth
Panel Cut Out
OM
Stock no.
19mm, 3.5 Digit AC Meter
61 12.7mm, 3.5 Digit Meter
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Panel Cut Out
Manu. Part No.
0.05 %
44 x 76 x 20.9 mm
3 Samples/sec
Manu. Part No.
OEM24LS
9
300 μA
4 per sec
200 mV
Stock no.
220-093
Price per
unit
Accuracy
Resolution
Temperature Stability
OM
S$
±0.15% (±1 Count)
0.1 mV
80 °C
S$
S$
1+ 100·00
8mm, 3.5 Digit Component Style
Very compact design
Black metal housing
Auto zero, auto-polarity
Operating Voltage Range (Vdc)
Supply Current
7.5 - 14
150 μA
Sample Rate
Full Scale Deflection
2.5 per sec
200 mVdc
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Accuracy
Resolution
Temperature Stability
Height
Manu. Part No.
OEM 1B
Panel Meters
±0.1% (±1 Count)
0.1 mV
100 °C
16.4 mm
Stock no.
446-2121
Price per
unit
Width
Depth
Depth Behind Panel
OM
S$
1+
55·50
23.4 mm
10.8 mm
5.5 mm
S$
S$
6.3mm 3.5 Digit Value Series
Voltmeter
10mm, 3.5 Digit, Miniature, Ten
Optional Symbols
Display symbols K, M, Hz, Ω, V, m, A, °C, °F, u, ∼, :
Low battery indicator
Plugs directly into a 28-pin, 0.6in. pitch DIL socket
Supplied with: a snap-in bezel and window
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Auto zero, auto polarity
Suitable for high volume applications
Evaluation Kit contains one of each module and an
evaluation board (stock no. 420-0478)
Supplied with: panel mounting bezel.
Manu. Part No.
DPM 400
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Manu. Part No.
V1
9 (Vdc)
2 mA
3 per sec
200 mVdc
0.25 ±3 counts
Stock no.
420-0557
Resolution
Temperature Stability
Height
Width
Panel Cut Out
Price per
OM
S$
unit
10+
33·90
0.1 mV
300 °C
18 mm
38 mm
31x15 mm
S$
S$
7.5-15
150 μA
3 readings/s
200 mVdc
±0.1% (±1 Count)
0.1 mV
Stock no.
260-274
Auto zero, auto polarity
Suitable for high volume applications
Evaluation Kit contains one of each module and an
evaluation board (stock no. 420-0478)
Supplied with: panel mounting bezel.
OM
S$
1+
87·00
100 ppm/°C
48 mm
24 mm
8.5 mm
10 mm
45 x 22 mm
S$
61
S$
12.5mm, 3.5 Digit, Eleven Optional
Symbols – Dual Rail Input
Display symbols Ω, Hz, V, m, A, °F, °C, μ, M, k, ∼
Low battery indication
Auto-ranging output connections
Plugs directly into a 40-pin DIL socket
Supplied with: a snap-in bezel and window
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
12.7mm 3.5 Digit Value Series
Voltmeter
Price per
unit
Temperature Stability
Width
Height
Depth Behind Panel
Overall Depth
Panel Cut Out
Manu. Part No.
DPM 500
7.5-14
150 μA
3 readings/s
200 mVdc
±0.1% (±1 Count)
0.1 mV
Stock no.
255-985
Price per
unit
Temperature Stability
Width
Height
Depth Behind Panel
Overall Depth
Panel Cut Out
OM
S$
1+
84·00
100 ppm/°C
60 mm
30 mm
8.2 mm
9.3 mm
57 x 27 mm
S$
S$
12.5mm, 3.5 Digit, Eleven Optional
Symbols – Single Rail Input
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Manu. Part No.
V 125
9 (Vdc)
2 mA
3 per sec
200 mVdc
0.25 ±3 counts
Stock no.
419-9384
Resolution
Temperature Stability
Height
Width (mm)
Panel Cut Out
Price per
OM
S$
unit
10+
39·40
0.1 mV
300 °C
24.4 mm
50 mm
41.5x21.4 mm
S$
Display symbols Ω, Hz, V, m, A, °F, °C, μ, M, k, ∼
Low battery indication
Auto-ranging output connections
Plugs directly into a 40-pin DIL socket
Supplied with: a snap-in bezel and window
S$
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
15mm, 3.5 Digit Value Series
Voltmeter
Auto zero, auto polarity
Suitable for high volume applications
Evaluation Kit contains one of each module and an
evaluation board (stock no. 420-0478)
Supplied with: panel mounting bezel.
Manu. Part No.
DPM 500S
3.5-6.5
250 μA
3 readings/s
200 mVdc
±0.1% (±1 Count)
0.1 mV
Stock no.
260-252
Price per
unit
Temperature Stability
Width
Height
Depth Behind Panel
Overall Depth
Panel Cut Out
OM
S$
1+
97·00
100 ppm/°C
60 mm
30 mm
8.2 mm
9.3 mm
57 x 27 mm
S$
S$
12.5mm, 4.5 Digit Fourteen Optional
Symbols, Single Rail Supply, Back Lit
Display
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Manu. Part No.
V 600
9 (Vdc)
2 mA
3 per sec
200 mVdc
0.25 ±3 counts
Stock no.
420-0563
Resolution
Temperature Stability
Height
Width
Panel Cut Out
Price per
OM
S$
unit
10+
42·70
0.1 mV
300 °C
34.5 mm
64.5 mm
62x32 mm
S$
S$
LCD 9.4 to 15mm Digit Height, Optional
Symbols
All these digital voltmeters have an operating temperature of 0 to + 50°C and feature selectable
decimal points, auto polarity and auto zero. They can be converted to ammeters using a 200mV digital
current shunt.
10mm, 3.5 Digit, Ten Optional Symbols
Manu. Part No.
OEM33S
220-071
Price per
unit
Manu. Part No.
3.5-6 (Vdc)
1 mA
1.6 readings/s
200mVdc/2 V dc
±0.01% (±1 Count)
0.01/0.1 mV
Stock no.
260-038
Price per
unit
Temperature Stability
Width
Height
Depth Behind Panel
Overall Depth
Panel Cut Out
OM
S$
S$
30 ppm/°C
72 mm
36 mm
9 mm
10.4 mm
68 x 33 mm
S$
1+ 235·00
15mm, 3.5 Digit 15 Optional Symbols,
Dual Rail Supply
Display symbols pH, μ, %, kg, °F, °C, A, m, Ω, M, k, ∼, V, -, :
Auto-ranging output connections
Plugs directly into two 23-way 0.1in. pitch connectors
Supplied with: a snap-in bezel and window
5; 9 Temperature Stability 100 ppm/°C
300 μAHeight
24 mm
200 mV Panel Cut Out
22.5 x 41 mm
0.1 mV Overall Depth
10.5 mm
Stock no.
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
DPM 300S
Display symbols BAT, ∼, °C, °F, μ, m, A, V, kΩ, MΩ
Miniature module with integral snap-fit bezel
5Vdc supply voltage (9Vdc selectable)
Plugs directly into a 28-pin, 0.6in. pitch DIL socket
Display blanking facility
Operating Voltage Range (Vdc)
Supply Current
Full Scale Deflection
Resolution
Display symbols BAT: μ, m, k, g, a, M, Ω, V, %, °C, °F, ∼, and continuity symbol
Low battery indicator
Band gap referenced for accuracy
Digital hold facility
Outputs provided for auto-ranging applications
Full Scale Deflection of 200mV or 2V (logic selectable)
Plugs directly into two 23-way 0.1in. pitch connectors
Supplied with: a snap-in bezel and window
OM
S$
1+
73·00
S$
S$
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
7.5-14 (Vdc)
150 μA
3 readings/s
200 mVdc
±0.1% (±1 Count)
0.1 mV
Temperature Stability
Width
Height
Depth Behind Panel
Overall Depth
Panel Cut Out
Many more leading brands from over 2,500 suppliers available online
30 ppm/°C
72 mm
36 mm
9 mm
10.4 mm
68 x 33 mm
1461
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Panel Meters
Description
Manu. Part No.
Stock no.
DPM 2000
255-963
Price per
unit
OM
S$
1+
84·00
S$
S$
15mm, 3.5 Digit 15 Optional Symbols,
Single Rail Supply
61
Manu. Part No.
3.5-6.5 (Vdc)
500 μA
3 readings/s
200 mVdc
±0.1% (±1 Count)
0.1 mV
Stock no.
DPM 2000S
260-280
Price per
unit
2A FSD, 85-264Vac
20A FSD, 85-264Vac
50A FSD, 85-264Vac
100A FSD, 85-264Vac
Price per
374-4589
374-4595
374-4602
374-4618
OM
S$
1+
1+
1+
1+
146·50
168·00
182·50
182·50
unit
unit
unit
unit
S$
S$
4-20mA Input LED Ammeters
Display symbols pH, μ, %, kg, °F, °C, A, m, Ω, M, k, ∼, V, -, :
Auto-ranging output connections
Plugs directly into two 23-way 0.1in. pitch connectors
Supplied with: a snap-in bezel and window
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Stock no.
LED Digital Ammeter
Temperature Stability
Width
Height
Depth Behind Panel
Overall Depth
Panel Cut Out
OM
S$
30 ppm/°C
72 mm
36 mm
9 mm
10.4 mm
68 x 33 mm
S$
S$
3 1⁄2 digit, 14.2mm high low power red LED display
Single +5V or optional +7.5-32V supply
DIP-switch selectable range and decimal points
Offset adjustable for 1-5V applications
Full Scale Input Range3.5mA (min.), 22mA (max.)
Input Impedance
100Ω
Voltage Drop
2.0V (max.)
Accuracy
Temperature Drift
Power Supply
Requirements
Overcurrent
Protection
Sampling Rate
±40 mA (max.)
Dimensions
±0.05% FS ±1 Count
±0.15 Counts/°C
DMS30PC-4/20S-5RL: +4.75 to
+5.25Vdc @ 20mA max.
DMS-30PC-4/20S-24RL: +7.5 to
+32Vdc @ 30mA max.
H23mm x W55mm x D27mm
2.5 readings per second
Panel Cut-out
H22.3mm x W53.8mm
1+ 100·00
15mm, 3.5 Digit 15 Optional Symbols,
Dual Rail Supply, Edge Connector
Display symbols pH, μ, %, kg, °F, °C, A, m, Ω, M, k, ∼, V, -, :
Outputs provided for auto-ranging applications
Large display surrounded by integral bezel
Electrical connection via PCB edge connector
Description
LED Ammeter, 7.5V to 32V Supply
Stock no.
Price
per
254-9175
unit
OM
S$
S$
S$
1+ 158·50
9.4mm, 3.5 Digit LED Display
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Full Scale Deflection
Accuracy
Resolution
Manu. Part No.
7.5-14
150 μA
3 readings/s
200 mVdc
±0.1% (±1 Count)
0.1 mV
Stock no.
DPM 200
260-050
Price per
unit
Temperature Stability
Width
Height
Depth Behind Panel
Overall Depth
Panel Cut Out
OM
S$
1+
82·50
30 ppm/°C
72 mm
46.75 mm
13 mm
15 mm
68 x 33 mm
S$
S$
Bargraph Indicator LS40 Series
Dimensions
Vertical and Horizontal Mounting
Bargraphs
Depth Behind Panel (mm)
25
Analogue 40 segment
light display, vertical
or horizontal
mounting
Voltage and direct current measurements
Linear light display for indicating a trend
for the measured quantity
Option of zero shift (420mA) and central
zero
Supply Voltage
24Vdc ±10%
Input Range
150mV to 200Vdc
20mA
Dimensions (mm)
96 x 24 x 68
Panel cut-out (mm)
92 x 22.3
Protection level
IP40 on front panel
Connection
screw terminal
Operating temperature
0 to +60°C
range
Description
Stock no.
LS40V Vertical Mounting
LS40H Horizontal Mounting
a334-1051
a334-1067
A Loop-powered digital panel meter with a large, easy-to-read,
bright red, LED display. All operating power is derived directly
from the loop current itself, no external power supply is
required! The large display exhibit uniform intensity over the
entire 4-20mA operating range. Additionally, the total maximum
loop voltage drop is only 5V. Users no longer have to settle for
difficult-to-read LCD displays in loop-powered applications.
Self-powered, no external supply required
Large, 0.37in./9.4mm digits
Constant 5V max. total loop drop
DIP-switch selectable range and decimal points
Vibration-resistant package
Reliable screw-terminal input connections
Manu. Part No.
DMS-20PC-4/20S-C
Panel Cut-Out (mm)
33.93 x 21.29
Stock no.
Price per
254-9181
O/A Size (mm)
35 x 22.5
OM
unit
S$
Digit Height (mm)
9.4
S$
S$
1+ 160·00
13.2mm, 4.5 Digit LED Meter
DIP switch selectable range, offset and decimal points
Non-interacting span (gain) and zero (offset) 20 turn
potentiometers
Screw terminal connections
Dimensions
Price per
unit
unit
OM
S$
1+
1+
469·00
469·00
S$
S$
LED 0 to 100Amp, AC Measurement
All have a measuring rate of 2.5 readings per second and an operating temperature range of 0 to 60°C.
9.4mm, 3.5 Digit AC Ammeter
Built-in current transformer for direct measurement
Large red LED display
Sub-miniature installation package
2000V isolation; UL/CSA recognised
H22.4 x W35 x D25.4mm
Panel cut-out: 33.9 x 21.3mm
Depth behind panel: 50.08/52.78/63.28mm (depending on
range)
Depth Behind
Digit Height
Panel (mm)
(mm)
26, 34 (307-5568) 13.2
Loop Voltage Drop
Sample Rate
Full Scale Deflection
Accuracy
Operating Temperature Range
Temperature Coefficient
Manu. Part No.
DMS-40PC-4/
20S-5RS-C
DMS-40PC-4/
20S-24RL-C
Manu. Part No.
DMS-40PC-4/20S-5RS-C
DMS-40PC-4/20S-24RL-C
Height (mm)
23
Length (mm)
Overall Depth
(mm)
33
55
2.1 V
2.5 Readings per sec
20 mA
±0.01 (±2 Counts)
0 → 50 °C
75 ppm/°C
Operating Voltage Range (Vdc)
5
Panel Cut Out
53.8 x 22.3 mm
Stock no.
307-5524
7.5 → 28
Stock no.
307-5524
307-5568
Price per
unit
unit
OM
307-5568
S$
S$
1+ 210·00
1+ 220·00
LCD 4 to 20mA Current Loop Powered
Ammeters
Manu. Part No.
ACA-20PC-1-AC1-RL-C
ACA-20PC-2-AC1-RL-C
ACA-20PC-3-AC1-RL-C
ACA-20PC-4-AC1-RL-C
1462
Full Scale Accuracy (%) Supply Voltage Supply Current mA
Deflection (A)
(V ac)
1.999
±0.15
85 - 264
50
19.99
±0.15
85 - 264
50
50
±0.15
85 - 264
50
100
±0.15
85 - 264
50
OM = Order Multiple a New product to range
Stock no.
374-4589
374-4595
374-4602
374-4618
9.4mm, 3.5 Digit Display
Very low loop drop: 1.8V typical (2V max)
Display range and decimal point selected by DIP switches
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Panel Meters
19mm, 3.5 Digit Display
Non-interacting adjustment of gain (span) and offset
(zero) via 20-turn potentiometers
2-wire screw terminal connection
Pin-for-pin compatible with the DMS-20PC-4/20S and has
a bezel available separately which creates front panel seal
to IP65
Meter is calibrated to read ’000’ for 4mA loop current and ’1000’ for
20mA loop current
Programmable decimal point
Zero and span calibrated by potentiometers
Low volt drop
Screw terminal connections
Optional splash proof (IP67 rated) alloy bezel available
Supplied with: mounting bezel and window
Dimensions
Stock No.
Depth Behind
Digit Height
Height
Length Overall Depth Panel Cut-Out
Panel (mm)
(mm)
(mm)
(mm)
(mm)
(mm)
307-5502
21.88
9.4
22
35
23
46.38 x 32.51
Loop Supply
2V
Accuracy
± 0.05% (± 1 Count)
Sample Rate
2.5 Readings per sec
Operating Temperature Range
0 to +60 °C
Full Scale Deflection
20 mA
Temperature Stability (Span Drift)
75 ppm/°C
Manu. Part No.
Stock no.
DMS-20LCD-4/20S-C
Price per
307-5502
OM
unit
S$
OM
S$
OM
S$
1+ 117·00
Digit Height
Height
Length
Overall Depth
(mm)
(mm)
(mm)
(mm)
19
44
76
8.5
4.8 V
Operating Temperature Range
3 readings per sec
Temperature Coefficient
20 mA
Panel Cut Out
0.1% (± 1 Count)
Stock no.
DPM942
Description
Stock no.
Bezel
176-4200
Price per
unit
OM
S$
1+
7·65
S$
OM
S$
Loop Supply
Sample Rate
Full Scale Deflection
Manu. Part No.
Stock no.
DPM 342
332-1849
S$
S$
S$
S$
S$
61
1+ 150·00
Accessories
Stock no.
Price
per
OM
S$
332-1906
unit
1+
46·60
7KT11 Digital Voltmeter
Height Length Overall
(mm) (mm) Depth
(mm)
20
40
19.1
5-6V
3 Readings per sec
20 mA
OM
Panel Cut Out
(mm)
72 x 40
0 to 50 °C
100 ppm/°C
72 x 40 mm
Siemens 7KT series
Dimensions
Digit
Height
(mm)
11
unit
IP67 protective bezel for DTM995
Backlit display
Programmable decimal points
Zero and span calibrated by potentiometers
Offset adjustment: ±950 + (span x 0.25) counts
Screw terminal connections
One-piece, snap-in design
Price per
119-356
Description
11mm, 3.5 Digit Display
17.1
Depth Behind Panel
(mm)
6.5
Loop Voltage Drop
Sample Rate
Full Scale Deflection
Accuracy
Manu. Part No.
Accessories
Depth Behind
Panel (mm)
Dimensions
Supply voltage 230Vac
Measurement range 12-600Vac
Rated frequency: 45 to 65 Hz
Protected to IP20
Panel CutOut (mm)
38 x 18
Accuracy
Operating Temperature Range
Temperature Stability (Span Drift)
Price per
OM
unit
± 0. 1% (± 1 Count)
0 to 50 °C
200 ppm/°C
S$
S$
S$
1+ 127·00
Accuracy
Full Scale Deflection
±0.5 %
600 V ac
Manu.
Part No.
Stock no.
Price
per
7KT1110
521-5128
unit
OM
S$
S$
S$
1+ 252·00
12.7mm, 3.5 Digit Display
Zero offset @ 4mA; -350 to +350 counts
Scale span @ 20mA; 200 to 1999 counts
Zero and span calibrated by potentiometers
Decimal point set externally
Electrical connection via screw terminals
Note: The reading at 4mA must be no greater than 18% of the
desired reading at 20mA
Lascar, Single Hole Fixing
LCD compact digital/virtual analogue indicators with common dimensions requiring a single 5.5mm
diameter mounting hole unless specified otherwise. A rubber seal is included providing splash proof
protection for the units when fitted to the meter during installation. All have an operating temperature
range of 0°C to 50°C unless specified otherwise.
LCD 3.5 Digit Virtual Analogue Meter
Auto-zero
Colour analogue display
No calibration required
Dimensions
Depth Behind
Digit Height
Height (mm)
Length (mm)
Overall Depth
Panel (mm)
(mm)
(mm)
10.3
12.7
38.1
60
16
Loop Voltage Drop
3V
Operating Temperature Range
Accuracy
0.1% (± 1 Count)
Temperature Coefficient
Manu. Part No.
Stock no.
OEM035C
260-151
Price per
OM
unit
S$
Panel Cut Out
(mm)
66 x 29
0 to 50 °C
100 ppm/°C
S$
S$
1+ 182·50
Stock no.
Mounting Bezel
260-173
Price per
unit
OM
S$
1+
7·40
S$
S$
12.7mm, 3.5 Digit Display
LED backlight (30mA @ 5V typical)
Programmable decimal points
Auto-polarity on display
Wide adjustment range
Optional alloy splash-proof (IP67) bezel available
13
Digit
Height
(mm)
12.7
Loop Voltage Drop
Sample Rate
Full Scale Deflection
Accuracy
Manu. Part No.
DPM 742-BL
Height Length Overall
(mm) (mm) Depth
(mm)
30
60
19.1
5.6 V
2.5 Readings per sec
20 mA
0.1% (± 1 Count)
Stock no.
446-2143
Price per
unit
Alloy Bezel, IP67
Stock no.
446-2165
Price per
unit
365-6246
Price per
unit
OM
S$
1+
54·50
S$
S$
Resolution
125mVdc
Height (mm)
Width (mm)
Depth (mm)
36
48
7.5
Ultra Low Profile
17 segment virtual analogue LCD with colour scale
Input 0 to 1V or ±1V selectable via jumper links
No calibration required
Screw terminal connections
Ratchet fixing clip
5-12 (Vdc)
4.5-5.5 (Backlight)
6 mA; 50 mA (Backlight)
0 to 1Vdc, -1 to +1 V dc
4 Readings per/ s
±1 segment
Supply Current
Full Scale Deflection
Sample Rate
Accuracy
Panel Cut
Out (mm)
62 x 32
0 to 50 °C
200 ppm/°C
62 x 32 mm
Operating Temperature Range
Temperature Coefficient
Panel Cut Out
Manu. Part No.
SP5 1710-BL
Stock no.
477-3853
Price per
unit
OM
S$
1+
78·00
S$
S$
12.5mm, 3.5 Digit 3-wire Voltmeter
OM
S$
OM
S$
OM
S$
OM
S$
OM
S$
1+ 151·00
Accessories
Description
EMA 1710
Stock no.
Operating Voltage Range (Vdc)
Dimensions
Depth Behind
Panel (mm)
Manu. Part No.
1Vdc Virtual Analogue Voltmeter,
LED Backlit
Accessories
Description
Operating Voltage Range (Vdc)5-12
Accuracy ±1 segment
Supply Current
6 mA
Resolution125mVdc
Full Scale Deflection
1 V dc
Height 21.4 mm
Sample Rate
10 Reading per/ sLength 43.5 mm
OM
S$
1+
35·70
Auto-zero, auto-polarity
Fixed decimal point
Low battery power warning
Connection wires fed via hollow mounting stud
Visit our website for additional price information and exciting promotions
1463
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Panel Meters
Operating Voltage Range (Vdc)
Supply Current
Full Scale Deflection
Sample Rate
Accuracy
3.5-7.0 (Vdc)
250 μA
200 mVdc
3 Readings per/ s
±0.1% (±2 counts)
Manu. Part No.
Stock no.
EMV 1025S-01
419-9356
Resolution
Temperature Stability (Zero Drift)
Height
Length
Price per
OM
S$
1+
67·00
unit
S$
0.1mVdc
100 ppm/°C
21.4 mm
43.5 mm
S$
61 12.5mm, 3.5 Digit 10-wire Voltmeter
Fixed decimal point
Auto-zero, auto-polarity
Low battery power warning
Connection via 10 wires fed through hollow mounting
stud
13mm, 3.5 Digit, LED Voltage/
Current, Panel Meter
Electrical connection via screw
terminal blocks
Snap-in or screw fix mountable
Configured using plug-in links and presets
Auto-zero, auto-polarity
Zero-shift; auto-zero or (if selected) adjustable up to
25% of range
Adjustable display brightness and decimal point
Adjustable zero and span
Sample rate of 3 readings per second
Resolution: 100μV/1μA range dependent
Temperature stability: 50ppm/°C
Input Voltage
Input Current
0.2 to 300 (10 ranges)
1-300mA (8 ranges)
Accuracy Specification
Width
±0.05% of ± 2 digits
96 mm
Input Resistance
Operating Voltage Range (Vdc)
Supply Current
Full Scale Deflection
Sample Rate
Accuracy
Manu. Part No.
7.5-15
150 μA
200 mVdc
3 Readings per/ s
±0.1% (±1 count)
Stock no.
EMV 1125
351-7567
Resolution
Temperature Stability (Zero Drift)
Height
Width
Price per
unit
OM
S$
1+
64·00
S$
0.1mVdc
100 ppm/°C
21.4 mm
43.5 mm
S$
Current ranges
1-10mA
10-100mA
100-300mA
202Ω
20Ω
2Ω
Manu. Part No. Supply Voltage Height (mm) Overall Depth (mm)
5120000102
5 V dc
24
80
5120000311
230 V ac
48
150
5120000201 24-230Vac; 24-48 V dc
24
150
5120000301 24-230Vac; 24-48 V dc
48
150
Description
12.5mm, 3 Digit 2-wire Voltmeter
No invalid readings
Signal powered
Reverse polarity protected
Note: At voltages below 4Vdc the LCD will display ’LO’ and
go blank. At voltages in excess of 25Vdc the LCD will display
’HI’.
Operating Voltage Range (Vdc)
Supply Current
Full Scale Deflection
Sample Rate
Accuracy
Manu. Part No.
4-25 (Vdc)
3 mA max
4 to 25 V dc
3 Readings per/ s
0.2V(±1 count)
Stock no.
EMV 1200
365-6252
Price per
OM
S$
1+
62·00
S$
100mVdc
100 ppm/°C
21.4 mm
43.5 mm
S$
8.6mm, 5 Digit Elapsed Hour Meter
Hour and 1/10 hour resolution
Trip and total measurement
Ideal for tracking machine hours
Voltage sense input and 100 hour pulse output
No back-up power required
Stock no.
EMC 1500
365-6274
Price per
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
295·00
360·00
639·00
580·00
S$
S$
Electrical connection via screw
terminal blocks
Snap-in or screw-fix mountable
Configured using plug-in links and presets
Auto-zero, auto-polarity
Zero-shift; auto-zero or (if selected) adjustable up to
25% of range
Adjustable display brightness and decimal point
Adjustable zero and span
Sample rate of 3 readings per second
Resolution: 100μV/1μA range dependent
Temperature stability: 50ppm/°C
Input Voltage
Input Current
Accuracy Specification
Description
115 Vac
230 Vac
Universal
Operating Voltage Range (Vdc)5-27 (Vdc)
Resolution0.1hr; 1hr
Supply Current
1.5 mA
Height 21.4 mm
Full Scale Deflection
9999.9hrs; 99999hrs Length 43.5 mm
Manu. Part No.
Price per
269-007
260-189
a260-202
260-218
Stock no.
269-007
260-189
260-202
260-218
20mm, 3.5 Digit, LED Voltage/
Current, Panel Meter
Resolution
Temperature Stability (Zero Drift)
Height
Length
unit
Stock no.
24x96mm 5Vdc
48x96mm 230Vac
24x96mm Universal
48x96mm Universal
Voltage ranges
0.2 - 300V
1.058 MΩ
Power Consumption
1W
6 VA
<4 W
<4 W
OM
S$
1+
71·00
S$
S$
0.2 to 300 (10 ranges)
1-300mA (8 ranges)
±0.05% of ± 2 digits
Power Consumption
6 VA
6 VA
<4 W
Manu. Part No.
Stock no.
5120000414
5120000411
5120000401
269-029
260-195
a260-224
Price per
unit
unit
unit
Height
Width
Overall Depth
OM
S$
1+
1+
1+
410·00
415·00
693·00
48 mm
96 mm
150 mm
Stock no.
269-029
260-195
260-224
S$
S$
12.5mm, 3 Digit Thermometer
12.7mm LCD 4-digit Data Display
Four measurement ranges
Internal thermistor sensor
Facility to connect and use external sensor
Easy connection
Operating temperature range -10 to +50°C
Sensor
Internal
Internal
External
External
Range
-10 to +50°C
+14 to +122°F
-20 to 170°C
-4 to +338°F
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Manu. Part No.
Resolution
0.5°C
1°F
1°C
2°F
Accuracy
±1°C ±2 counts
±2°F ±4 counts
±1°C ±2 counts
±2°F ±4 counts
4-28 (Vdc)
1 mA typ
3 Readings per/ s
Stock no.
EMT 1900
365-6268
Serial data entry and latching via three control lines (data
in, clock and load data)
CMOS and TTL compatible
Can be cascaded in multi-display applications
Easily interfaced with PIC micro-controllers
All LCD segments individually addressable
Supply current: 40μA @ 5Vdc
Backlight current: 50mA at 5Vdc
Max clock rate: 1.5Mhz (50% duty cycle)
Price per
unit
Temperature Stability (Zero Drift)
Height
Length
OM
S$
1+
64·00
S$
100 ppm/°C
21.4 mm
43.5 mm
S$
LED/LCD Digital Voltage & Current Meters
All meters have an operating temperature range of 0 to 50°C.
Dimensions
Stock
Number
269-007
260-189
260-218
269-029
260-195
186-2679
DIN
1⁄2
1
1
1
1
-
Height
(mm)
24
48
48
48
48
34.5
Width
(mm)
96
96
96
96
96
64.5
Depth
(mm)
80
150
150
150
150
5.5
Panel Thickness (mm)
7 max, 4 for snap-in
7 max, 4 for snap-in
7 max, 4 for snap-in
7 max, 4 for snap-in
7 max, 4 for snap-in
3
Depth Behind
Panel (mm)
2
Panel Cut-Out
(mm)
92 x 22.5
92 x 45
92 x 45
92 x 45
92 x 45
38 x 18
Height
Width
34.5 mm
64.5 mm
Manu. Part No.
DDM 4
OM = Order Multiple a New product to range
Stock no.
186-2679
Price per
unit
2 mm
OM
S$
1+
78·00
S$
S$
LED ’SMART’ Status Indicators
The FPSI (Flash Programmable Status Indicator) is a compact LED module that indicates green when
the input voltage is between two easily programmable levels and red when the input voltage is higher
or lower.,The levels are easily set and stored in flash memory. They can be changed as often as
desired. An FPSI can be used in countless applications where a GO/NO GO indicator is required.
Red/Green Status Indicator, Round
IP67 rated metal housing
2 user programmable colour switching thresholds
Logic level (1mA max) alarm control output
Screw terminal connections
Supplied with: rubber seal and mounting nut.
Supply Voltage Range
Supply Current per
Indicator
Full Scale Deflection
Accuracy
1464
Depth Behind Panel
7 to 24 Operating Temperature -30 to
V(ac) Range
+70 °C
15 mA Dimensions
24.8x24
mm
Panel Cut Out
20.5 mm
2%
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Manu. Part No.
Stock no.
EM20-FPSI 1010
477-3904
Panel Meters
Price per
OM
S$
1+
71·00
unit
S$
S$
Operating Voltage
Range (Vdc)
8/15 V
–
Manu. Part No.
3900AKTJCR
3754PCA00R
LED / LCD Temperature Displays
12.7mm, 3.5 Digit LCD ,Type K,
Temperature Indicator
Accuracy
±0.5% ±2°C
±1.5% ±2°C
±2% ±2°C
±2.5% ±2°C
Operating Voltage Range (Vdc)
Supply Current
Sample Rate
Temperature Range
Manu. Part No.
4.75 - 5.25 (Vdc)
5 mA
2.5 readings/sec.
-50°C to 1000 °C
Stock no.
OEM035KCS
Price per
220-065
unit
Stock no.
Price per
Height
Width
Overall Depth
Panel Cut Out
OM
S$
46 mm
71 mm
21 mm
66 x 29 mm
S$
S$
S$
S$
1+ 166·50
Accessories
Description
Mounting Bezel
260-173
unit
OM
S$
1+
7·40
19mm, 3.5 Digit LCD, Type K,
Temperature Indicator with LED
Backlighting
Cold function compensation allows operation in ambient temperatures from 0 to 50°C without
affecting accuracy
Degrees centigrade reading
Two potentiometers for calibration
Connections via screw terminals
Mounting bezel and window supplied
Optional, IP67 rated, alloy bezel available
Accuracy ± 1% (± 1 count)
Operating Voltage Range (Vdc)
Supply Current
Temperature Range
Height
Manu. Part No.
7.5 - 24
3.5 mA
-50 → +600 °C
44 mm
Stock no.
DTM 995B
720-4385
Price per
unit
Width
Depth
Depth Behind Panel
Panel Cut Out
OM
S$
76 mm
8.5 mm
6.5 mm
72 x 40 mm
S$
S$
S$
S$
1+ 114·00
Accessories
Description
IP67 protective bezel for DTM995
Stock no.
Price
per
OM
S$
332-1906
unit
1+
46·60
DPM48/40000MFE2
13.5mm, 3.5 Digit LED Temperature
Indicator
Price per
OM
S$
1+
1+
560·00
688·00
unit
unit
S$
258-186
258-192
S$
61
Stock no.
a313-233
Price per
unit
OM
S$
S$
S$
1+ 1841·00
Accessories
Description
Configuration Software
Electrical connection is via screw
terminals
Automatic cold junction
compensation
Sample rate reading of 2.5 readings per second
Pt100 input has a linear analogue output of 1mV/°C
(2kΩ source)
Stock no.
a312-331
Price per
unit
OM
S$
1+ 220·00
Omron K3MA Series
Selection Guide
258-186
K -50 to +1000°C
T -50 to 325°C
J -25 to 625°C
To BS4937
Type K part 4
Type T part 5
Type J part 3
Operating Temperature
0 to 50°C
Input impedance
30MΩ
Dimensions:H48 x W96 x D152mm; behind panel 140mm
Panel cut-out: 90×42mm; max. panel thickness 6mm
258-186
a258-192
Stock no.
Microprocessor based unit which
can be programmed to measure
voltage, current or temperature
An external shunt can be used to
enable higher input currents to be
measured
Signals can be scaled, combined or
recorded
Sample rate of 4 readings per
second
Functions are configured using front
panel buttons or from a remote PC
Electrical connection via screw
terminals
Software configuration package, interface lead and a 9 to 25-way ’D’ adaptor (stock no. 218-289) are
available
Zero offset
Mathematical combination of signals of similar units with two or more meters
Digital display filter
Minimum/maximum/hold memory and data logging memory with time-base
Isolated analogue recorder output
Wide range universal switch mode PSU
Display hold facility
Dimensions: H48 x W96 x D143mm
Depth behind panel: 151mm
Panel cut-out: 92 x 45.5mm
Panel thickness: 22mm
DPM 48/40000MFE1 - Additional features
Twenty five point user definable scaling/linearisation
True rms ac measurement
Five display and data logging status indicators
Supplied with: Mounting bezel
Supply
24 to 48Vdc ±20%, 24 to 230Vac +15/-20%, 4W max
Operating temp.
0 to 50°C
Signal Processing
Linear scaling
offset y = ax + b
Non linear scaling
square, root, sin, cos, tan, log
Combined signals
+, -, x, /, average, A/B%, B/A%
Data logging
160 readings, max sample interval 18hrs. Continuous or triggered
Set-points
4 set points with adjustable threshold, hysteresis, time delay and reset
time delay and reset
A/D conversion
10/20 readings/sec. ±40k counts
Output Specifications For DPM 48/40000MFE1
Analogue Output
4-20mA or -20 to +20mA
Alarm modes
Four relays, flash display
Relay output
30Vdc/250Vac 1A
Serial interface
RS-485 addressable 9600 baud (8-e-1) 9 pin connector
Operating Voltage Range
24/48
Input Current
20 and 40mA (dc)
(Vdc)
50 and 100mA (ac)
Operating Voltage Range (V 24/230
Accuracy Specification
0.4% ± 4 digit (dc); 0.2% ± 4
ac)
digit (ac)
Thermocouple Type
K/T/J/E/U/L/N/R/S/B Pt100 2, 3 Temperature Stability
75 (dc)
or 4-wire
125 (ac) ppm/°C
Manu. Part No.
LED Pt100/Thermocouple Displays
Stock Number
Thermocouple Temperature Range
Stock no.
Accuracy
Specification
±0.3% ±1 °C
±0.2% ±1 digit
13mm, 5 Digit LED Indicator/
Controller - DPM 48/40000MFE1
Cold function compensation allows operation in ambient
temperatures from 0 to 50°C without affecting accuracy
Temperature stability; 0.05°C
Connections via rear screw terminal block
Optional mounting bezel available
-20 to 350°C
351 to 500°C
501 to 1000°C
-50 to -20°C
Operating Voltage Range (V Thermocouple
ac) (V ac)
Type
8/15; 115/240
K/T/J
110/220
Pt100 2, 3 or 4wire
257-284
N -100 to 1100°C
E -50 to +800°C
K 0 to 1000°C
Type N part 8
Type E part 6
Type K part 4
0 to 50°C
30MΩ
258-192
Pt100 -150 to 800°C
Highly visible LCD display with 2-colours (red and green) which can be used as either green or red
or combined to give status indication
Front-panel key operation for easy setting
96 x 48 mm front housing and the same short depth of 80mm
Front-panel key operation for easy setting
Average processing function suppresses flicker
Easy confirmation of max/min display
Finger protective cover (standard equipment) protects against electric shock
Water- and dust-proof NEMA4X (IP66 equivalent) front panel
Dimensions: 101.2 x 97 x 48 mm. Panel cut-out: 92 x 45 mm
K3MA-J Process Panel Meter
Multi-range DC voltage/current input
Scaling, front-panel forced-zero, zero-limit functions
0 to 45°C
Input Type 0 to 5V, -5V to +5V, -10V to +10V, 4-20mA, 0-20mA
Output Type 2 x SPST-NO relays
New products available online every week
1465
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Panel Meters
K3HB-R Rotary Pulse Input Meter
61
Manu. Part No.
Supply
Voltage
K3MA-J-A2 100/
240VAC
K3MA-J-A2
24VACVDC
100-240 V
ac
24 Vac/dc
Stock no.
Price
per
OM
S$
611-7722
unit
1+
262·00
611-7738
unit
1+
275·00
S$
S$
K3MA-L Temperature Panel Meter
Wide input range - select from two types of platinumresistance thermometers and ten types of
thermocouples
Temperature input shift and temperature unit selection
functions
Input Type
Output Type
Manu. Part No.
Rtd:PT100, JPT100
THC: K, J, T, E, L, U, N, R, S, B
1 x SPDT relay
Supply
Voltage
K3MA-L-C 100/
100-240 V ac
240VAC
K3MA-L-C 24VAC/ 24 Vac/dc
VDC
Supply Voltage
Description
Stock no.
Price
per
OM
S$
611-7750
unit
1+
275·00
611-7744
unit
1+
254·00
S$
S$
Contact, NPN, PNP, or voltage pulse input
Includes scaling, auto-zero time, startup compensation time
functions
Rotary pulse 0.05 to 30.00 Hz
2 x SPST-NO relays
Manu. Part No. Supply Voltage
(V ac)
K3MA-F-A2 100/ 100-240
240VAC
Stock no.
Price
per
OM
S$
611-7766
unit
1+
293·00
Rotary pulse input meter, NPN
Rotary pulse input meter, PNP
S$
S$
Omron K3HB Series
This new range of Process Panel Meters replaces the K3N Series. K3HB series consists of process,
temperature, weighing and linear sensor indicators. These indicators with analogue inputs or pulse
inputs feature a clear and easy-to-use colour-change display and all have IP66 housing. Extra
functionality can be added using option boards (3 maximum).
Dimensions: 101.2 x 112 x 48 mm. Panel cut-out: 92 x 45 mm
1/8DIN (48x96mm) fascia, 100/240Vac supply. Colour change
display to indicate process status and configurable bar graph for
display of magnitude of input. Input ranges are scaleable linear
AC current, DC current or DC voltage to cover all standard linear
scales.
3 models offer standard linear scaleable inputs
K3HB-XAD – DC current, +/-199.99mA / 4-20mA
K3HB-XVD – DC voltage, +/-199.99V / 1 to 5V
K3HB-XAA - AC current, 0 to 10A
Colour change display and output indications give process status
Separate option cards available tailoring meter to the application of your choice (typical stock no.
611-7637)
K3HB-HTA 100/240VAC
100-240 V ac
+/-0.1 %
Manu. Part No.
K3HB-XAD 100/240VAC
K3HB-XVD 100/240VAC
Stock no.
Process meter, DC-I
Process meter, DC-V
611-7520
611-7536
Price per
unit
unit
OM
S$
1+
1+
570·00
472·00
Stock no.
611-7520
611-7536
S$
S$
K3HB-V Weighing Meter
+/-0.1 %
100-240 V ac
Manu. Part No.
Stock no.
K3HB-VLC 100/240VAC
1466
611-7564
Price per
unit
OM
S$
1+
462·00
unit
unit
OM
S$
1+
1+
510·00
550·00
S$
S$
S$
OM = Order Multiple a New product to range
S$
+/-0.1 %
100-240 V ac
Stock no.
611-7558
Price per
unit
OM
S$
1+
535·00
S$
S$
K3HB-C Up/down Pulse Counter Panel
Meter
1/8DIN (48x96mm) fascia, 100/240Vac supply. Colour change
display to indicate process status and configurable bar graph
for display of magnitude of input. With a scaleable input of up
to 50kHz, the K3HB-C is able to accept NPN, PNP open collector
and voltage pulses of non voltage contact pulses, making it
suitable for all pulse input options such as encoders, sensors
and switches.
Two standard models with input speeds for up to 50 kHz
IP66 front fascia make them suitable for harsh and wash
down environments
Dual colour change display for status indication and configurable bar graph
Separate option cards available tailoring meter to the application of your choice (typical stock no.
611-7637)
Supply Voltage
Description
Up/Down pulse count panel meter, PNP
Up/Down pulse count panel meter, NPN
Description
For load cell inputs. Ideal for measuring factors such as load,
torque, pressure and weight. With a simple to use menu structure
for fast setups including pre-scaling which allows the display to
show the required measurements rather than an arbitrary value,
which ensures accuracy and aids productivity.
Easy display of status with dual colour change
High clarity display and programmable bar graph
Very good in low light atmosphere
IP66 fascia ensures suitability in harsh and wash down
environments
Separate option cards available tailoring meter to the application of your choice (typical stock no.
611-7637)
Accuracy
Supply Voltage
Price per
611-7615
611-7621
Accuracy
Supply Voltage
Manu. Part No.
Description
Stock no.
In 1/8 DIN (48x96mm) format, which accepts both
thermocouple and PT100 input options in a single unit.
Additional outputs can be added to enable ON/OFF control or
external alarm signalling. High resolution (0.01c) dual colour
display can be used to show process status and the fascia is
IP66 (NEMA4x) meaning the unit can be used in harsh and
wash down environments.
Simple setup with intuitive menu structure
High resolution display to 0.01°C supported with fast
sampling every 20ms
Two point input shift allows for removing offsets caused by the sensors across the input range
Separate option cards available tailoring meter to the application of your choice (typical stock no.
611-7637)
Dual colour display gives immediate process status with configurable bar graph to display
magnitude, scale or deviation
Accuracy: Thermocouple input: (±0.3% PV or ±1°C, whichever is larger) ± 1 digit max. (see Note);
Platinum resistance thermometer input: (±0.2% PV or ±0.8°C, whichever is larger) ± 1 digit max.
Note: K, T, N (-100°C or less): ±2°C ±1 digit max.
U, L: ±2°C ±1 digit max.
B (400°C max.): Nothing specified.
R, S (200°C max.): ±3°C ±1 digit max.
W: (±0.3% PV or ±3°C whichever is larger) ±1 digit max.
K3HB-X Process Panel Meter
Supply Voltage
Accuracy
Description
Process meter, DC-I
Process meter, DC-V
100-240 V ac
K3HB-H Temperature Panel Meter
K3MA-F Frequency Panel Meter
Input Type
Output Type
For measuring rate, ratios, differences and passing time
applications. An encoder is used to provide a pulsed input,
the meter then calculate based on this to provide the
operation required. A power supply is an option available to
power the encoder (see options and accessories section for
more information).
Two standard models with pulse input speed up to 50 kHz
maximum
Separate option cards available tailoring meter to the
application of your choice (typical stock no. 611-7637)
Colour change display to give process status
Programmable bar graph to show magnitude
PNP, NPN, and open collector input options up to 50 kHz
Accuracy: Functions F1, F6: ±0.006% rdg ±1 digit (for voltage pulse/open collector sensors);
Functions F2 to F5: ±0.02% rdg ±1 digit (for voltage pulse/open collector sensors)
Up/Down pulse count panel
meter, PNP
Up/Down pulse count panel
meter, NPN
100-240 V ac
Manu. Part No.
K3HB-CPB 100/240VAC
K3HB-CNB 100/240VAC
Stock no.
Price
per
OM
S$
611-7570
unit
1+
550·00
611-7592
unit
1+
550·00
S$
Stock no.
611-7570
611-7592
S$
Omron K3N Series
Process Panel Meters
Back lit 7mm high 5 digit LCD display
(-19999 to 99999)
Configurable analogue inputs: 420mA, 0-20mA, 1-5V d.c., -5 to +5V
d.c. and -10 to +10V d.c., all fully
scaleable so can be configured to
represent a wide range of
engineering inputs
Supply voltage: 24V d.c.
Non-voltage and open collector inputs suitable for sensors, encoders and pulse inputs from 0.05 to
30Hz and 0.1 to 5000Hz
All inputs are simple to scale by setting the lower and upper limits and what they are to represent
which are automatically linearised to the required scale
Accuracy ±0.1% Full Scale
Front panel protected to NEMA 4 (IP66)
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Panel Meters
Description
Programmable display changes colour when activation or de-activation of outputs
Panel cut-out: 45 x 22.2mm
Dimensions: H24mm x W48mm x D83mm; depth behind panel: 80mm
CE marked in compliance with all current European noise and emissions regulations
Approvals: UL and CSA
Description
Manu. Part No.
d.c. Voltage/Current/NPN Input, 3 Transistor Output (PNP Open
K3GN-PDT2 24VDC
Collector)
d.c. Voltage/Current/NPN Input, 2 Relay SPST-NO Output, with RS-485
K3GN-NDCCommunications
FLK-24VDC
Manu. Part No.
Stock no.
Price per
a381-0715
381-0721
K3GN-PDT2 24VDC
K3GN-NDC-FLK-24VDC
unit
unit
OM
S$
1+
1+
333·00
400·00
Document Proof Thermal Paper
Price
per
OM
S$
IP66 Watertight Cover
48 x 48mm (1⁄16 DIN)
IP66 Watertight Cover
48 x 96mm (1⁄8 DIN)
IP66 Watertight Cover
96 x 96mm (1⁄4 DIN)
Y92A-48N
188-4635
unit
1+
56·00
Y92A49N
328-1022
unit
1+
66·20
Y92A-96N
188-4663
unit
1+
84·30
S$
unit
10+
16·10
S$
S$
381-0721
S$
61
S$
For applications where extra protection is required
Front cover polycarbonate, seating material chloroprene
rubber
Stock no.
OM
Stock no.
381-0715
IP66 Watertight Covers
Manu.
Part No.
623-013
Price per
Ultra High-speed Printer
Accessories for Omron K3N Series
Description
Stock no.
S$
S$
6+
54·90
12+
53·80
6+
82·70
12+
81·00
32 (default), 24 or 42 columns
Panel cut out 62 x 109 mm
Easy paper loading system
Fixed head thermal printer mechanism
Near silent printing
High resolution, high quality print (8 dots/mm)
Low voltage operation
Out of paper and door open warnings
Operating temperature range 0 to 50°C
Resolution
384 dots per line
Selectable baud rates
1200, 2400, 4800, 9600, 19200, 38400
Character set
224 character IBM set, including d
Reliability
15000000 lines (MCBF)
Paper type
Thermal
Paper width
57mm
Input Type
RS-232
Print Speed
13 Lines, 560 Characters,
50mm/sec
Print Buffer
Yes
Supply Voltage
5 - 8.5 V dc
Manu. Part No.
Stock no.
AP1200
444-2004
Price per
OM
S$
1+
540·00
unit
S$
S$
S$
S$
Accessories
Configurable Process Indicator
Description
Thermal paper
9.4mm, 3.5 Digit LED Process
Indicator
0/5 V and 0/10 V
+5 V → +40 V (depending on model)
100 kΩ
2.5 samples/second
0°C → +60°C
Description Manu. Part No.
Low Power DMS-20PC-0/5-24RL-C
Red LED
Stock no.
Price
per
307-5495
unit
Height
Length
Depth Behind Panel
Panel Cut Out
OM
S$
22.4 mm
35.1 mm
23.08 mm
33.93 x 21.29 mm
S$
S$
S$
S$
1+ 168·00
Accessories
Description Manu. Part No.
Bezel
DMS-BZL3-C
Stock no.
176-4200
Price per
unit
Price per
OM
S$
224-9853
box of 20
1+
104·50
Microprocessor Controlled
Alphanumeric Printers
Accepts 0-5V and 0-10V inputs
Large, easy-to-read LED display
High quality 20 turn span (gain) and zero (offset)
adjustments
DIP switch selectable range and decimal points
Screw terminal input connections
Measuring range:
Supply voltage:
Input impedance:
Sampling rate:
Operating temperature:
Stock no.
OM
S$
1+
7·65
Thermal and Impact Panel Printers
Compact Alphanumeric Data Printer
– IPP144-40G
Low cost, 24 column, panel-mounted,
complete with data cable
Snap-in ink ribbon cartridges, printout
on standard paper rolls
Incorporates highly reliable EPSON
printer mechanisms
Ideal for use in automatic test
equipment, communication terminals,
data logging, weighing equipment,
etc.
Selectable inverted print
Dot addressable graphics (144 dots
per line)
Double width or height; double width/height printout modes
Built in self-test
Operating temperature range 0 to 50°C
Technical Specification
Parallel input TTL parallel interface, positive true; 7 bits, STROBE and BUSY Centronics protocol
Serial input V24/RS-232C protocol TTL interface, positive true; 1 start bit, 7 data bits, 2 or more stop
bits, parity ignored. Pin selectable 110, 300, 1200, 2400 baud
Character set 96 character ASCII lower case and upper case
Character format 7 (high) × 5 (wide) dot matrix. 24 characters per line. Graphics mode, n × 144 dots.
Double height and width character format, as well as text (standard) or data (inverted) mode, can
be selected by sending appropriate control codes before printable codes
Connectors Polarised 16-way wrap posts (0.1 pitch) for data lead (supplied)
Input Type
Print Buffer
Parallel
Yes
Manu. Part No.
AP25-24-RS
Print Speed
Supply Voltage
Stock no.
260-139
Price per
unit
42 or 96 Lines per minute
5 V dc
OM
S$
1+
550·00
S$
S$
S$
S$
Accessories
Description
Ink cassette M16x printers
57mm paper roll
2 paper rolls and 1 ribbon
Stock no.
Price per
OM
S$
251-6844
251-6850
202-981
bag of 10
bag of 20
1 set
1+
1+
1+
78·00
41·00
18·20
DIN standard 72x144mm housing
Long life, fixed head, thermal printing mechanism
Alphanumeric text or graphics
Multi-standard serial data interface
10s to 24h Print Interval Timer
Out-of-paper alarm LED
Uses “document proof” thermal paper with 10 year storage life, see 623-013
Interface
Print Buffer
RS 232; RS 422; RS 485 or TTY
Yes
Manu. Part No.
Supply
Voltage
IPP144-40G 110-230V 110 - 230 V
ac
IPP144-40G 24VDC 24 V dc
Print Speed
Print Interval Timer
Stock no.
Price
per
OM
S$
478-0564
unit
1+
1530·00
a478-0570
unit
1+
1607·00
15 lines/s
Yes
S$
S$
www.rssingapore.com
Accessories
Many more leading brands from over 2,500 suppliers available online
1467
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Panel Meters
Panel Mounting
All have a panel cut-out of 92 x 92mm unless stated otherwise.
Wireless
Countis E50 Energy Meter
Moeller Efergy e2 Wireless
Energy Meter
61
The Efergy e2 combines to
convenience of wireless
connectivity with powerful
data-logging capabilities to
allow you to monitor and
review your electrical energy
usage.,It uses clip-on sensors
and a compact transmitter to
monitor single or three
phase supplies, and sends
power usage information
every 6 seconds to a portable
display.,This battery powered LCD display can provide you with instantaneous usage, historic usage,
average usage and projected CO2 emissions.,However the Efergy e2 not only records this usage
information for review, it can be downloaded via USB to your PC then analysed using the powerful
eLink software included with the energy meter.,The eLink software enables you to gain a greater
understanding of energy consumption. Its graphical approach features estimated future usage and
demand management functions providing a more sophisticated way to analyse energy consumption.
Supplied with: Current sensor, Transmitter, Display unit & USB cable
Wireless transmission (433.52Mhz) with a typical range of 40-70m
Measuring current 50mA – 95A
64K internal memory (sufficient for 12 months+ of data)
USB download connection
Powered by 3xAAA batteries (Not supplied)
Note: Two additional sensors must be purchased for three phase operation
Mounting Type
Frequency
Transmission Distance
Portable Display (plus clip-on sensor)
433.52 MHz
40 → 70m
Stock no.
a690-3863
Price per
OM
unit
Display Type
Sensor range
S$
S$
The Countis E50 is an Active Energy meter
with some basic additional functions for
measuring electrical values in all low voltage
networks. All the parameters can be
configured and displayed on its front panel.
Multi-measurement and metering
(currents, voltages, active, reactive and
apparent power, power factor)
Direct acess keys
Totalising Meter
Resetable Partial Power readings
2 versions
Fitted Pulse Output
Fitted RS485 Communication
Standards: cl.0.5S IEC62053-21; cl. 2 IEC 661268, IEC
615567-12
Mounting Type
Supply Voltage
Panel
86 → 520 V ac
Description
Input Current
Display Type
Stock no.
Energy meter- pulse
Energy meter- RS485
a709-9707
a709-9701
Price per
unit
unit
Pri Ct- 6000A, Sec Ct -5 A
Backlit LCD screen
OM
S$
1+
1+
286·00
416·00
S$
S$
Plug-in Modules for use with DIRIS A40 MultiFunction Energy Meter
LCD
0 → 95A
S$
1+ 130·00
Accessories
Description
Stock no.
Additional Current Sensor
a690-3867
Price per
unit
OM
S$
1+
19·50
Description
Sentron Power Monitoring
Sentron PAC3200
This device can be used wherever
electrical energy is distributed.
SENTRON PAC3200 records more than
50 electrical parameters such as
voltage, current, powers, energy
values, frequency, power factor and
asymmetry. The compact control panel instrument
supplies basic data which will give you an overview of
where electricity is consumed and where energy flows in
the electrical system.
Measurement voltage up to 690 V (UL-L)
High measuring accuracy for energy, class 0.5S in
accordance with IEC62053-22 for active energy
Integrated Ethernet interface.
Multifunctional digital inputs and outputs
Large, illuminated graphics display
Simple operation with intuitive user prompting, multi-language text displays
Comprehensive recording of consumption: 10 energy meters for active energy, reactive energy and
apparent energy, high and low tariffs, import and export
Expandable with optional expansion module PAC PROFIBUS DP Expansion and PAC RS485
Expansion Module
Mounting depth: 51 mm or 73 mm with expansion module
Approvals: CE(Europe), cULus(US/ Canada), C-Tick(Australia), GOST(Russia)
Mounting Type Panel
Depth (mm)
56
Supply Voltage 95 → 240 Vac ±10 % / 50 / 60 Hz or 110 → 340 Vdc ±10 %.
Height (mm)
96
Display Type
LCD
Protection Rating IP65
Pulse Output
No
Width (mm)
96
Description
Manu. Part No.
Stock no.
PAC 3200 Power Monitor
7KM2112-0BA00-3AA0
665-4928
Module PROFIBUS DP
7KM9300-0AB00-0AA0
665-4921
Description
Stock no.
PAC 3200 Power Monitor
Module PROFIBUS DP
a665-4928
a665-4921
Price per
unit
unit
OM
S$
S$
1+ 1012·00
1+ 215·00
S$
Stock no.
Metering - ±kWh, ±kVArh and
kVAh with two programmable
pulse outputs
Communications – two or
three-wire RS485 with JBUS/
MODBUS protocol and
transmission speed up to
38400 baud
Analogue – two configurable
0⁄4-20mA outputs (two modules
per unit maximum)
www.rssingapore.com
1468
OM = Order Multiple a New product to range
S$
a405-6170
unit
1+
232·00
a405-6192
unit
1+
444·00
405-6209
unit
1+
290·00
S$
S$
M850 Multifunction Meter
The new Hobut ¼ DIN 96 x 96mm multifunction
panel meter features a unique blue LED screen
which can be seen in direct sunlight. It is easy to
use and features user-programmable CT and VT
ratios. It can be used on all single or 3 phase systems with any
input voltage without re-programming.
Standard Functions:
Phase Voltage (V)
Phase to Neutral Voltage (V)
Phase Current (I)
Frequency (Hz)
Active Power (W)
Active Energy (kWh)
Reactive Power (VAr)
Apparent Power (VA)
Reactive Energy (VArh)
Power Factor (PF)
Instantaneous Amp Demand, Instantaneous Watt Demand, Instantaneous VA Demand, Maximum
Amp Demand, Maximum Watt Demand, Maximum VA Demand, Neutral Current Measurement
Programmable Functions
Current Transformer Ratio
Voltage Transformer Ratio
Baud Rate, Parity, Stops
AC or DC AUX
1A or 5A CT
Single or 3 phase system
Input voltage range 28-570V
RS485 address, 1-247
Security code access for programming
Note: Both RS 485 output (Modbus protocol) and pulsed output (for Wh or VArh) and are plug-in
options
See RS website for optional output modules 668-4070 & 668-4073
Mounting Type
Supply Voltage
My Account
Price per OM
Panel
100 → 400 V
Input Current
Display Type
Description
Manu. Part
No.
Stock no.
Price
per
M850 Power
Meter
M850-MP1
668-4061
unit
OM
S$
1+ 255·00
5A
LED
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Panel Meters
Current and voltage
accuracy
Power accuracy
Frequency accuracy
Real / Reactive
Energy accuracy
Metering over range
Impedance
Input current CT
rating
Permissable
overload
Impedance
Load
Pulse Output
CUBE Meter
Equally suitable for both 3 wire and 4 wire 3-phase
unbalanced loads (optionally for single phase or balanced 3phase systems), these meters have been designed to
measure accurately irrespective of the type of load – ideal
for a motor or heater, or for a modern electronicallycontrolled load.
DIN 96 x 96 format
Accuracy better than Class 1
Large clear display
Isolated pulse output
Installation aids - easy to install and convenient to use
Protected to IP54
Mounting Type
Supply Voltage
Input Current
Description
kWh & kW Meter
kWh, kW, V, I, PF Meter
DIN 96 x 96
230 V
5A
Stock no.
531-210
531-220
Display Type
Pulse Output
Accuracy Class
Price per
unit
unit
OM
S$
1+
1+
255·00
300·00
LCD
Yes
> Class 1
S$
Supply Voltage (Vac)
S$
Input Current
Power Consumption
PowerLogic PM700 Power Meter
Manu. Part No.
These power meters are designed to ensure
compliance with section 3 of the New Approved
Document L2 of the Building Regulations which is
concerned with the conservation of fuel and power in
buildings other than dwellings
3 phase and neutral viewable simultaneously
Green back-lit display, 6 lines total, 4 concurrent values
Intuitive interface with self-guiding menus
ETL approved: recognised by the Government-led ECA scheme for
Automation Monitoring and Targeting (aM&T)
Energy Class 1 (IEC61036): sufficient accuracy for submetering and
cost allocation
Power, current demand, THD, min/max: expanded metering data for
the cost of analogue metering
IP52 front display; body IP30
Applications include panel instrumentation, submetering and cost
allocation, remote monitoring of an electrical installation, harmonic
monitoring (THD) and contact optimisation and load profiling
Depth behind panel - 50mm
Note: Current transformer must be ordered separately. See stock no.
331-474 typically.
Standards: Safety: CE, as per IEC 61010-1, UL508; Energy Class 1 IEC61036
Model
PM700
Power metering with
THD, min/max
Type of measurement
True rms up to the 15th harmonic On three-phase AC system (3P 3P+N) 32
samples per cycle
Current and voltage
0.5%
accuracy
Power accuracy
1%
Frequency accuracy
±0.01Hz from 45 to 65Hz
Real / Reactive Energy
IEC 61036 Class 1 & 2
accuracy
Metering over range
1.2 Un
Impedance
2MΩ (L-L) / 1MΩ (L-N)
Input current CT rating
Primary: Adj. 5A to 65534 A; Secondary: 5A starting at 10mA
Permissable overload
15A continuous; 50A for 10 sec per hour; 120A for 1 sec per hour
<0.1Ω
Impedance
Load
<0.15VA
Supply Voltage (Vac)
110-415Vac
Update Period
1s
125-250Vdc
Input Voltage
110-415Vac
Height
96 mm
125-250 V dc
Input Current
6A
Width
96 mm
Power Consumption
5VA; 3 W
Depth
88 mm
Manu. Part No.
PM700MG
Stock no.
509-1562
Price per
unit
Input Voltage
OM
S$
1+
900·00
S$
S$
PowerLogic PM700P Power Meter
These power meters are designed to ensure
compliance with section 3 of the New Approved
Document L2 of the Building Regulations which is
concerned with the conservation of fuel and power in
buildings other than dwellings
3 phase and neutral viewable simultaneously
Green back-lit display, 6 lines total, 4 concurrent values
Intuitive interface with self-guiding menus
ETL approved: recognised by the Government-led ECA scheme for
Automation Monitoring and Targeting (aM&T)
Energy Class 1 (IEC61036): sufficient accuracy for submetering and
cost allocation
Power, current demand, THD, min/max: expanded metering data for
the cost of analogue metering
IP52 front display; body IP30
Applications include panel instrumentation, submetering and cost
allocation, remote monitoring of an electrical installation, harmonic
monitoring (THD) and contact optimisation and load profiling
Depth behind panel - 50mm
Note: Current transformer must be ordered separately. See stock no.
331-474 typically.
Standards: Safety: CE, as per IEC 61010-1, UL508; Energy Class 1 IEC61036
Model
PM700P
Power metering with THD, min/max, 2 pulse outputs
Type of
True rms up to the 15th harmonic On three-phase AC system (3P 3P+N) 32 samples
measurement
per cycle
PM700PMG
0.5%
1%
±0.01Hz from 45 to 65Hz
IEC 61036 Class 1 & 2
1.2 Un
2MΩ (L-L) / 1MΩ (L-N)
Primary: Adj. 5A to 65534 A; Secondary: 5A starting at 10mA
15A continuous; 50A for 10 sec per hour; 120A for 1 sec per hour
<0.1Ω
<0.15VA
Static output 240 ± 10% V AC or 300 ± 10% V DC, 100ma max. @ 25°C , (deviate 0.56
mA per °C above 25°C) 2.41 KV rms isolation
110-415Vac
Update Period
1s
125-250Vdc
110-415Vac
Height
96 mm
125-250Vdc V dc
6A
Width
96 mm
5VA; 3 W
Depth
88 mm
Stock no.
509-1578
Price per
unit
OM
S$
1+
1064·00
S$
61
S$
PowerLogic PM710 Power Meter
These power meters are designed to ensure
compliance with section 3 of the New Approved
Document L2 of the Building Regulations which is
concerned with the conservation of fuel and power in
buildings other than dwellings
3 phase and neutral viewable simultaneously
Green back-lit display, 6 lines total, 4 concurrent values
Intuitive interface with self-guiding menus
ETL approved: recognised by the Government-led ECA scheme for
Automation Monitoring and Targeting (aM&T)
Energy Class 1 (IEC61036): sufficient accuracy for submetering and
cost allocation
Power, current demand, THD, min/max: expanded metering data for
the cost of analogue metering
IP52 front display; body IP30
Applications include panel instrumentation, submetering and cost
allocation, remote monitoring of an electrical installation, harmonic
monitoring (THD) and contact optimisation and load profiling
Depth behind panel - 50mm
Note: Current transformer must be ordered separately. See stock no.
331-474 typically.
Standards: Safety: CE, as per IEC 61010-1, UL508; Energy Class 1 IEC61036
Model
PM710
Power metering with
THD, min/max, RS 485 communication
Type of measurement
True rms up to the 15th harmonic On three-phase AC system (3P 3P+N) 32
samples per cycle
Current and voltage
0.5%
accuracy
Power accuracy
1%
Frequency accuracy
±0.01Hz from 45 to 65Hz
Real / Reactive Energy
IEC 61036 Class 1 & 2
accuracy
Metering over range
1.2 Un
Impedance
2MΩ (L-L) / 1MΩ (L-N)
Input current CT rating
Primary: Adj. 5A to 65534 A; Secondary: 5A starting at 10mA
Permissable overload
15A continuous; 50A for 10 sec per hour; 120A for 1 sec per hour
Impedance
<0.1Ω
Load
<0.15VA
Communication
RS 485 port 2-wire, up to 19200 bauds, Modbus RTU
Supply Voltage (Vac)
110-415Vac
Update Period
1s
125-250Vdc
Input Voltage
110-415Vac
Height
96 mm
125-250 V dc
Input Current
6A
Width
96 mm
Power Consumption
5VA; 3 W
Depth
88 mm
Manu. Part No.
PM710MG
Stock no.
509-1584
Price per
unit
OM
S$
1+
1145·00
S$
S$
Diris A20 Multi-Function Energy Meter
The DIRIS A20 is a multi-function meter for
measuring electrical values in all low voltage
networks. All the parameters can be
configured and displayed on its front panel
and measuring and timing functions used.In
addition DIRIS A20 has a function for
correcting connection errors.
Multi-measurement and metering
(currents, voltages, frequency, active,
reactive and apparent power, power
factor)
Direct acess keys
THD voltages and currents up to level 51
Programmable hour meter
Backlit LCD screen.
Optional aditionnal modules
Pulse Output/Alarm management
RJ485 Jbus/Modbus communication
Standards: cl.0.5S IEC62053-22; cl. 2 IEC 62053-22
Visit our website for additional price information and exciting promotions
1469
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Panel Meters
Manu. Part No.
Mounting Type
Supply Voltage
Panel
50 → 500 Vac
Description
Stock no.
Price per
a709-9666
Diris A20
Input Current
unit
OM
S$
1+
529·00
5A
S$
S$
Panel
110-400Vac/120-350Vdc
Description
Stock no.
a709-9675
Diris A40 110-400Vac/120-350Vdc
unit
1+
S$
1/5A
S$
S$
625·00
Countis E40 Energy Meter
The COUNTIS E40 is a totalising meter
allowing direct reading of the power
consumed, using a pulse output. A partial
meter with reset allows the energy to be
metered over a specific period
3-phase meter via current transformer up
to 6000 A
Backlit LCD display
Din Rail
230 → 480Vac
Stock no.
a724-3651
OM
S$
unit
1+
468·00
S$
S$
Designed for low voltage networks
Six digit mechanical display
Suitable for installations where partial energy
consumption and analysis is required
Opto-isolated pulsed output of transistor enable permit remote
monitoring of usage
Front cover protection to IP51
Standards: Standards: IEC1036 Class 1
Supply Voltage (Vac)
Power Consumption
Rated Voltage
Rated Base Current
Max Current
Width
70
230 (1 Phase)
< 0.25 VA
230 V ac
60 A
120 A
Stock no.
420-9380
Price per
Depth
70
Pulsed Output
Pulse Width
Pulse Current
Maximum Voltage Output
OM
S$
1+
350·00
unit
S$
Compact, easy to install unit
DIN rail mounting
Single phase measuring
Active energy; accuracy class B1 (CI.1)
Direct metering up to 65A
Backlit Liquid Crystal Display
Pulse and Infra-red output for Serial Communcation Adapter (SCA)
Internal clock for 1, 2 and 4 tariffs and monthly values
1470
DIN Rail
230 V ac
0.25 → 65 A
LCD
Yes
B (CI. 1)
Supply Voltage
Description
Manu.
Part No.
M-bus serial
communication
adapter
RS-232 serial
communication
adapter
Power line
communication Aband serial
communication
adapter
Power line
communication Bband serial
communication
adapter
EIB/KNX remote
meter reading
adapter
Depth (mm)
Digit Height
Height (mm)
Power Consumption
Protection Rating
Width (mm)
ODIN 4165
ODIN 4110
100 pulses/kWh
500 mA
35 mA
24 V(dc)
ODINsingle Mini Power Meter
Mounting Type
Supply Voltage
Input Current
Display Type
Pulse Output
Accuracy Class
1+ 230·00
Accessories for ODINsingle Mini Power
Meter
Stock no.
Price
per
OM
S$
CTM04000
570-613
unit
1+
295·00
CRM04000
570-596
unit
1+
280·00
CAL06000
570-580
unit
1+
410·00
CCL06000
570-603
unit
1+
410·00
ZS/S1.1
570-584
unit
1+
370·00
Primary Current
Supply Voltage (Vac)
Description
Dimensions (mm)
Height
85
S$
Stock no.
570-613
570-596
570-580
570-603
570-584
S$
S$
The ODIN Meter is a three-phase active and
compact electricity energy meter. The ODIN
Meter is designed to be mounted on a DIN rail in
distribution boards or cabinets. Using a 7digit
LCD display, the meter is available with options such as front
mounting for panel mounting or serial communication adapters.
The meters are compliant to standard IEC61010-1 and EN61326.
Accuracy class 2.
Direct connection or via current transformers
7 digit LCD display with phase and load indicators
2 wire M-BUS or RS232 adapters available (option)
Easy installation
Wiring diagram in front panel
Wall, panel or enclosure mounting
IR port
Can be connected to bus bar
Setting of current transformer with pushbutton
Direct connection
LCD
Single Phase kWh Meter
Stock No.
420-9380
S$
ODIN Meter Range
Input Current
Display Type
Price
per
S$
Power
Consumption
2.5 VA
M-bus serial communication adapter
100 → 240 V ac
RS-232 serial communication adapter
100 → 240 V ac
2.5 VA
2.5 VA
Power line communication A-band serial communication 220 → 240 V ac
adapter
Power line communication B-band serial communication 220 → 240 V ac
2.5 VA
adapter
250 mW
EIB/KNX remote meter reading adapter
21 → 30 V dc
DIN Rail Mounting
Mounting Type
Supply Voltage
unit
Description
Input Current
Price per OM
570-607
OM
Mounting Type DIN Rail Protection Rating IP20
Depth (mm) 58
Width (mm)
36
Height (mm) 90
The DIRIS A40 is a multi-function meter for
measuring electrical values in all LV/HV
voltage networks. All the parameters can be
configured and displayed on its front panel
and measuring and timing functions used.In
addition DIRIS A40 has a function for
correcting connection errors. Additional Plug
in modules can be fitted to give extra
functions to the meter.
Multi-measurement and metering
(currents, voltages, frequency, active, reactive and apparent
power, power factor)
Direct Access keys
THD voltages and currents up to level 63, Individual Harmonics
to Level 25
Programmable hour meter.
Backlit LCD screen.
Optional aditionnal modules
Pulse outputs
Alarm management
RJ485 Jbus/Modbus or Profibus Communication
Ethernet Connection options available
Standards: cl.0.5S IEC62053-22; cl. 2 IEC 62053-22
Mounting Type
Supply Voltage
OD1365
Price per
Communication units suitable for use
with ABB ODINsingle Mini Power Meter
Diris A40 Multi-Function Energy Meter
61
Stock no.
63.4 mm
6 mm
85 mm
1 VA
IP20
35.8
OM = Order Multiple a New product to range
S$
Features
Pulse O/P and direct connection
Pulse O/P and trans. connection
Description
Stock no.
ODIN 4165
ODIN 4110
529-4171
529-4187
Price per
unit
unit
5A
3 x 230/400
Input Current
(A)
65
10
OM
S$
1+
1+
540·00
560·00
Stock no.
529-4171
529-4187
S$
PowerLogic PM9 Series
The PM9 series offers the basic measurement
capabilities required to monitor an electrical
installation in a 4-module case (18 mm modules).
Can be used to monitor 2-, 3- and 4-wire lowvoltage systems and connect to external current transformers
- PM9 for basic measurements
- PM9P for basic measurements with pulse output
- PM9C for basic measurements with Modbus RS-485 output (for
suitable Ethernet Gateway, see Stock no. 538-3271 )
Large backlit display
Demand power
IEC 62053-21 Class 2 for energy
Current and voltage accuracy 0.5%
Energy and power accuracy 2%
IP 52 rating
Note: For current transformers, please see later in section, Current
Transformers Suitable for 5A f.s.d. Meters
Maximum Secondary Current 5 A
Supply Voltage (Vac)
3 x 220 → 450
Input Current
5A Direct, or according to CT
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Panel Meters
Description
Description
PM9
PM9P
Description
Features
Basic measurements only
Pulse O/P
Stock no.
PM9
PM9P
538-3237
538-3243
Price per
unit
unit
Stock no.
538-3237
538-3243
OM
S$
1+
1+
485·00
1344·00
S$
S$
Multifunction Graphics Meters
Panel Pilot Series - Multifunction
Graphics Meters
Size
2.4 inch
2.8 inch
Graphic meter
TFT
Stock no.
704-8138
704-8131
Price per
OM
S$
S$
S$
1+ 154·51
1+ 175·13
Moving Coil DC Meters
Presentor Range DC Meters
Electrical connections via
6mm tag terminals
Accuracy classes BS89;
IEC51 and EN60051
Operating temperature
range –25 to +55°C
Front mounting panel cutout 27mm diameter in
maximum panel thickness
of 4mm
Rear mounting panel cutouts (with bezel) in a
maximum panel thickness
of 6mm
Fixing stud sizes: M2 x 10.0mm (for 43.9 x37.9mm), M2.5 x 10.0mm (for other sizes)
Overall Meter Size (mm)
Fascia Dimensions
Depth
Fixing Centres
Width (mm)
Height (mm)
A
B
C
D
E
F
G
43.9 x 37.9
42.4
20.2
31.2 7.5
32
76.1 x 58.8
73.7
32.2
30.5 10
47.8
38
9.7
94 x 72.4
91.5
40.5
30.2 11
57.2
48.5
8.6
124 x 93
121
55.3
30.2 12.2 92
Type
Full Scale
Scale Accuracy Coil Panel Cut Out Manu.
Stock no.
Deflection Range
(%) Resistance Rear Mount Part No.
±2·5
1000 Ω
47 × 24
1968272
196-8272
44x38mm Ammeter 0-100 μA 0 to 100
47 × 24
IS 10994
196-8294
44x38mm Ammeter
1 mA
0 to 100
±2·5
50 Ω
44x38mm Ammeter 50-0-50 μA 100-0-100 ±2·5
1000 Ω
47 × 24
1968317
196-8317
44x38mm Ammeter
20 mA
0 to 100
±2·5
–
47 × 24
IS 10999
196-8345
±1·5
1000 Ω
80 x 37
1968373
196-8373
76x59mm Ammeter 0-100 μA 0 to 100
80 x 37
1968395
196-8395
76x59mm Ammeter
1 mA
0 to 100
±1·5
50 Ω
1000 Ω
80 x 37
1968418
196-8418
76x59mm Ammeter 50-0-50 μA 100-0-100 ±1·5
76x59mm Ammeter
20 mA
0 to 100
±1·5
–
80 x 37
1968452
196-8452
±1·5
1000 Ω
98 x 46
1968474
196-8474
94x72mm Ammeter 0-100 μA 0 to 100
98 x 46
IS 11012
196-8496
94x72mm Ammeter
1 mA
0 to 100
±1·5
50 Ω
1000 Ω
98 x 46
1968519
196-8519
94x72mm Ammeter 50-0-50 μA 100-0-100 ±1·5
94x72mm Ammeter 4 to 20 mA 0 to 100
±1·5
–
98 x 46
IS 11017
196-8547
±1·5
1000 Ω
128 x 61
1968569
196-8569
124x93mm Ammeter 0-100 μA 0 to 100
1000 Ω
128 x 61
1968610
196-8610
124x93mm Ammeter 50-0-50 μA 100-0-100 ±1·5
44x38mm 100uA 0-100 scale
44x38mm 1mA 0-100 scale
44x38mm 50-0-50uA 100-0-100
44x38mm 4-20mA 0-100 scale
OM
S$
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
107·00
91·00
108·00
112·50
115·50
105·00
115·50
105·50
125·00
128·00
S$
S$
61
Stock no.
Bezel for front mount, 44x38mm
Bezel for front mount, 76x59mm
Bezel for front mount, 94x72mm
Rear mount bezel, 44x38mm
Rear mount bezel, 76x59mm
Rear mount bezel, 94x72mm
196-8676
196-8682
196-8698
196-8727
196-8733
196-8749
Price per
OM
S$
1+
1+
1+
1+
1+
1+
3·26
3·26
3·55
10·10
10·10
10·10
unit
unit
unit
unit
unit
unit
S$
S$
Moving Coil, Crystalview
’Crystalview’ Meters
Surface or flush mounted behind a panel through a
rectangular cut-out
90° deflection, pivot and jewel moving coil movement
Pre-printed, easy-to-fit scales (available separately)
Accuracy; ±2% of Full Scale Reading (Class II)
Depth 44.5mm, depth behind panel 28.5mm
4 → 30 V dc
A range of high specification analogue meters using standard industrial sizes and full-scale deflections
housed in transparent acrylic fronts and white plastic (SAN) rear body mouldings. Operation utilises
taut band core magnet movements assembled within a slim barrel, occupying minimum behind panel
space. With the exception of 4-20mA units they incorporate a rear zero adjustment screw, calibration is
unaffected by ferrous panels. Standard scales can be replaced with customised scales as required and
front and rear panel mounting bezels, finished in black and grey ABS, are available.
Description
196-8373
196-8395
196-8418
196-8452
196-8474
196-8496
196-8519
196-8547
196-8569
a196-8610
Description
Voltage
unit
unit
76x59mm 100uA 0-100 scale
76x59mm 1mA 0-100 scale
76x59mm 50-0-50uA 100-0-100
76x59mm 4-20mA 0-100 scale
94x72mm 100uA 0-100 scale
94x72mm 1mA 0-100 scale
94x72mm 50-0-50uA 100-0-100
94x72mm 4-20mA 0-100 scale
124x93mm 100uA 0-100 scale
124x93mm 50-0-50uA 100-0-100
scale
Price
per
Accessories
The Panel Pilot Series range of colour TFT graphics meters
allow users to program and display meter styles previously
provided by a traditional panel meter. Available in both 2.4in
and 2.8in sizes, both meters are programmable via USB
interface with free configuration software provided with the
unit. Users can select the type of meter style they want from
an initial choice of 6 (choices include 3.5 digit, bargraph, and
analogue style options) then personalise the display by
selecting preferences including colour, text and voltage input
scaling. Once programming is complete, the user can save all
selections to the meter and computer, detach the unit and
mount in their panel as they would any standard display.
320x240 pixel resolution TFT display with touch screen technology
Simple USB interface for set up for configuring and programming the meter
User customisable colours, labels, scaling and power up ’splashscreen’
Simple panel mounting with screw terminal connections
Note: Free Windows-based configuration software downloadable from the web- compatible with
Windows XP, 2000, Vista and Windows 7 (32⁄64 bit)
Type
Display
Stock no.
Stock no.
Price
per
OM
S$
196-8272
196-8294
196-8317
196-8345
unit
unit
unit
unit
1+
1+
1+
1+
116·50
104·00
113·50
133·50
S$
S$
Fascia
Scale Range
Dimensions
(mm)
50 x 23.5
0 to 100μA
50 x 23.5
100-0-100μA
92 x 45
4 to 20mA
Coil Resistance
Scale Length (mm)
Manu. Part No.
Stock no.
1.2 kΩ
720 Ω
3Ω
40
40
78.5
CV15X100UAS
CV15XCZ100UAS
CV20XSZ20MAS
220-655
220-661
220-784
Description
Moving coil meter,0-100uA
57x48mm
Moving coil meter,100-0-100uA
57x48mm
Moving coilmeter,4-20mA
100x83mm
Stock no.
Price
per
OM
S$
220-655
unit
1+
59·70
220-661
unit
1+
56·00
220-784
unit
1+
61·00
S$
S$
Moving Coil, DIN Specification
DC Voltage and Current Meters
90° scale arc
Accuracy class 1.5; BS89 and IEC51
Flame retardant case to UL94V0
Fitted with mounting brackets
Operating temperature range -25 to +40°C
Terminal covers available separately
48x48mm ammeters have integral scales; appropriate
scales must be chosen and ordered separately for the
72x72 & 96x96mm ammeters
Note: All ammeters are shunt operated and an appropriate 75mV shunt (no. 257-307 typically)
must be ordered separately for each meter; the meters cannot be used without them
Description
Scale
Sensitivity Depth Depth Behind Panel Cut Out Stud Size
Stock no.
Range
(mm) Panel (mm)
Dia. (mm)
48x48 Voltmeter 0 → 10V 1 kΩ/V
72
53
45 x 45
M4 x 10mm
313-542
48x48 Voltmeter 0 to 30V
1 kΩ/V
72
53
45 x 45
M4 x 10mm
313-558
48x48 Voltmeter 0 to 100V 1 kΩ/V
72
53
45 x 45
M4 x 10mm
313-564
72x72 Voltmeter 0 to 10V
1 kΩ/V
66
48.5
68 x 68
M4 x 10mm
313-643
66
48.5
68 x 68
M4 x 10mm
313-659
72x72 Voltmeter 0 to 30V
1 kΩ/V
66
48.5
68 x 68
M4 x 10mm
313-665
72x72 Voltmeter 0 to 100V 1 kΩ/V
66
58.5
92 x 92
M4 x 20mm
313-750
96x96 Voltmeter 0 to 30V
1 kΩ/V
96x96 Voltmeter 0 to 100V 1 kΩ/V
66
58.5
92 x 92
M4 x 20mm
313-766
48x48 Ammeter 0 to 1A
75 mV
72
53
45 x 45
M4 x 10mm
313-485
48x48 Ammeter 0 to 3A
75 mV
72
53
45 x 45
M4 x 10mm
313-491
48x48 Ammeter 0 to 10A
75 mV
72
64
45 x 45
M6 x 21mm
313-508
48x48 Ammeter 0 to 30A
75 mV
72
64
45 x 45
M6 x 21mm
313-514
48x48 Ammeter 0 to 100A 75 mV
72
66
45 x 45
M6 x 23mm
313-520
72x72 Ammeter None
75 mV
66
48.5
68 x 68
M4 x 10mm
313-570
96x96 Ammeter None
75 mV
66
58.5
92 x 92
M4 x 20mm
313-671
Description
48x48mm voltmeter, 10V
48x48mm voltmeter, 30V
48x48mm voltmeter, 100V
72x72mm voltmeter, 10V
72x72mm voltmeter, 30V
72x72mm voltmeter, 100V
96x96mm voltmeter, 30V
96x96mm voltmeter, 100V
New products available online every week
Stock no.
Price
per
OM
S$
313-542
313-558
313-564
313-643
313-659
313-665
313-750
313-766
unit
unit
unit
unit
unit
unit
unit
unit
1+
1+
1+
1+
1+
1+
1+
1+
86·00
86·00
81·50
81·50
86·00
81·50
89·50
89·50
S$
S$
1471
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Panel Meters
Description
61
48x48mm ammeter 75mV,
1A scale
48x48mm ammeter 75mV,
3A scale
48x48mm ammeter 75mV,
10A scale
48x48mm ammeter 75mV,
30A scale
48x48mm ammeter 75mV,
100A scale
72x72mm ammeter, 75mV,
no scale
96x96mm ammeter, 75mV,
no scale
S$
S$
Price
per
OM
S$
313-485
unit
1+
78·00
313-491
unit
1+
78·00
Model
Panel Cut Out Rear
Mount (mm)
313-508
unit
1+
82·00
313-514
unit
1+
82·00
AL19W
AL29W
AL39W
20.2 × 42.4
32.3 × 73.7
40.5 × 91.5
313-520
unit
1+
78·00
313-570
unit
1+
79·00
313-671
unit
1+
79·00
Stock no.
Price
per
OM
S$
Dial for 72x72mm meter,0-100A
Dial for 96x96mm meter,0-10A
Terminal cover for 48x48 meter
Terminal cover for 72x72/96x96
meter
313-621
313-700
804-767
804-751
unit
unit
unit
unit
1+
1+
1+
1+
3·57
4·92
2·20
2·20
Description
S$
S$
Fixing Stud Size
M6 x 20 mm
Price
per
OM
S$
Voltmeter
Voltmeter
Voltmeter
Voltmeter
Ammeter
Ammeter
Ammeter
Ammeter
Ammeter For Use
With 75mV Shunt
Ammeter For Use
With 75mV Shunt
0 to 10 V
0 to 30 V
0 to 50 V
0 to 100 V
0 to 1 A
0 to 5 A
0 to 10 A
0 to 50 A
0 to 100 A
315-9442
315-9458
315-9464
315-9470
315-9486
315-9492
315-9509
315-9515
315-9521
unit
unit
unit
unit
unit
unit
unit
unit
unit
1+
1+
1+
1+
1+
1+
1+
1+
1+
107·00
107·00
107·00
101·50
101·50
101·50
104·50
110·00
101·50
0 to 300 A
315-9537
unit
1+ 101·50
S$
S$
S$
S$
S$
S$
S$
S$
S$
S$
S$
S$
1+ 102·00
1+ 105·00
1+ 114·50
Price per
196-8676
196-8682
196-8698
196-8727
196-8733
196-8749
OM
S$
1+
1+
1+
1+
1+
1+
3·26
3·26
3·55
10·10
10·10
10·10
unit
unit
unit
unit
unit
unit
Stock no.
S$
Price per
258-013
OM
S$
1+
22·30
OM
S$
1+
24·90
unit
Rectangular VU Indicator
S$
Robust, back of panel,
indicators
Easily back-lit
Red and black scale
graduations
Dimensions (mm)
Stock No. A B W D H I
220-368 64.5 53.5 35 18 12 13
Description
Stock no.
VU meter 53.5 x 64.5mm
220-368
Price per
unit
Edge & Battery Indicators
All have a calibration accuracy of ±20%.
SIFAM VU Meters
Edge Indicators - Clear Scale
Standard Range AL 19, 29 & 39W Series
Performance based on
BS6840:Part 17:1991 & IEC
268-17:1990, which cover
dynamic characteristics,
frequency response,
harmonic distortion, input
impedance and
temperature range
Calibrated for use with a
3.6kΩ resistor 4VU above
the scale marking so that
reference deflection (0VU)
is produced by a signal
4VU above 1mW in 600Ω
(1.228V)
Transparent acrylic front
and polystyrene (SAN) rear body moulding with various bezels available separately
Taut band core magnet movement housed in a 26mm diameter barrel occupies minimum behind
panel space
Rear zero adjustment screw
Connections via 6mm tag terminals (High Specification - M4 bolt terminals)
Meters do not suffer from calibration interference when mounted on ferrous panels
Black ABS front and behind panel mounting bezels, supplied separately
Dual meter scale indicates -20 to 3dB and 0 to 100%
Rear mounting 12V bulb top-lighting assemblies are available for rear mounted meters
Operating temperature range –25 to +55°C
Panel cut-out for barrel Ø 27mm, fixing stud size M2.5 x 10mm
Full Scale Deflection
Coil Resistance
Centre Zero
0-100 μA
1750 Ω
No
Height
Width
Panel Cut Out
C
31.2mm
30.5mm
30.2mm
D
7.5mm
10mm
11mm
E
32mm
47.8mm
57.2mm
F
38mm
48.5mm
OM = Order Multiple a New product to range
G
9.7mm
8.6mm
14 mm
50 mm
35.4 x 14 mm
Stock no.
Price
per
OM
S$
259-561
unit
1+
22·60
Edge Indicators - Red Pointers
Moulded case indicators with clear scale and red pointer
Will accept T1/1.4 bi-pin 0.36W bulbs for rear illumination
Complete with two mounting brackets
Edge Indicators - Clear Scale have a scale range of 0-10
Full Scale Deflection
Coil Resistance
Centre Zero
100-0-100 μA Height
1750 Ω
Width
Yes
Panel Cut Out Rear Mount
Stock no.
259-549
Mounting Holes
1472
Bezel for front mount, 44x38mm
Bezel for front mount, 76x59mm
Bezel for front mount, 94x72mm
Rear mount bezel, 44x38mm
Rear mount bezel, 76x59mm
Rear mount bezel, 94x72mm
SU6
Stock no.
Model
AL19W
AL29W
AL39W
Stock no.
Manu. Part No.
Full Scale
Deflection
unit
unit
unit
S$
VU meter with a non-linear
characteristic directly scaled
in dB
130 μA input reads 0dB with
250 μA giving a full scale
indication of +6dB
Can be back-lit from the rear
or sides
Normally mounted behind
panel with a cut-out of 37 x
22mm
Accuracy class 1.5, to BS89/IEC51
Ammeters over 50A are for use with 75mV shunt
Integral scales
Flame retardant case to UL94V0
Operating temperature range –25 to +40° C
72mm high x 72mm wide, panel cut-out 56mm diameter
(suitable cutters stock nos. 511-487 and 615-113 )
U-clamp and 4 pin M3 fixing methods supplied including
anti-rotation pin
Description
201-0318
201-0324
201-0330
OM
Miniature VU Meter
Horizontal Scale DC Meters
64 mm
50.5 mm
Price
per
201-0318
201-0324
201-0330
VU Meters
Moving Coil, Round Cutout
Depth
Depth Behind Panel
Stock no.
Stock no.
Accessories
Accessories
Description
Model Scale LengthHeight Width Fascia
Fascia Depth Behind Panel Cut Out
(mm)
(mm) (mm) Height (mm) Width (mm) Panel (mm) Rear Mount (mm)
AL19W
32
37.9 43.9
19.9
42.4
37.2
20.2 × 42.4
AL29W
47.8
58.8 76.1
32.2
73.7
38.7
32.3 × 73.7
AL39W
57.2
72.4 94.0
40
91.5
39.2
40.5 × 91.5
Stock no.
Price per
unit
14 mm
50 mm
35.4 x 14 mm
OM
S$
1+
23·60
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Panel Meters
Round Battery Status Indicators
Moving Iron, DIN Standard
Miniature moving-coil indicators
Monitor voltage and other status levels
Rugged movements in metal housings with plastic fascias
Panel mounting clip provided
Negative (black) lead connected to case
Full Scale Deflection
Coil Resistance
Centre Zero
0.5 mA Dia.
750 Ω Depth Behind Panel
No
Panel Cut Out Rear Mount
Stock no.
258-849
Price per
Standard DIN AC Moving Iron Meters
90° scale arc, accuracy class 1.5
Manufactured to BS89/IEC51
Frequency range 15 to 400Hz
Operating temperature range: –25 to +40°C
Flame retardant case to UL94V0
Panel cut out: 45 x 45mm, 68 x 68mm, 92 x 92mm
Terminal covers supplied separately (see accessories)
12.6 mm
11.8 mm
11.5 mm
OM
S$
1+
27·80
unit
S$
S$
Moving Iron
Polarised Moving Iron Current and Voltage
Meters
Polarised moving-iron meters with robust movements for use on
dc and rectified ac only
Accuracy ±8% for battery charger applications
Operating temperature range –20 to +40°C
Snap-in panel fixing
Connections 25mm, 1/4 inch spade terminals, push-on or soldered
’U’ bolt fixing
Height
Width
Depth
48 mm
48 mm
24 mm
Depth Behind Panel
Panel Cut Out
Description
0-10A Ammeter
0-15A Ammeter
0-20A Ammeter
0-15V Voltmeter
0-30V Voltmeter
Description
0-10A Ammeter
0-15A Ammeter
0-20A Ammeter
0-15V Voltmeter
0-30V Voltmeter
15 mm
15mm dia
Scale Range
0-10 A
0-15 A
0-20 A
0-15 V
0-30 V
Stock no.
244-862
244-878
244-884
244-890
244-907
Full Scale Deflection
10 A
15 A
20 A
15 V
30 V
Price per
OM
S$
1+
1+
1+
1+
1+
10·10
14·70
14·70
26·10
27·70
unit
unit
unit
unit
unit
AC Moving Iron Current and
Voltage Meters
Stock no.
244-862
244-878
244-884
244-890
244-907
S$
S$
Howard Butler
Description
Horizontal 90° scale, accuracy class
1.5 to BS89 IEC51
Integral scales
Manufactured to BS89/IEC51
Flame retardant case to UL94V0
Fixing via single hole using ’U’ clamp (anti-rotation pin
supplied), or 4-point M3
Note: Ammeter overload is twice current rating - shown
within (brackets) in scale range .
Supplied with: mounting brackets
Height
Width
Depth Behind Panel
Description
0-5A Ammeter
0-10A Ammeter
0-25A Ammeter
0-40A Ammeter
5A CT Operated Ammeter 0-60A
5A CT Operated Ammeter 0-80A
5A CT Operated Ammeter 0-120A
5A CT Operated Ammeter 0-150A
5A CT Operated Ammeter 0-200A
5A CT Operated Ammeter 0-300A
Voltmeter, 250 Vac
Voltmeter, 500 Vac
45-65Hz Frequency Meter
Description
0-5A Ammeter
0-10A Ammeter
0-25A Ammeter
0-40A Ammeter
5A CT Operated Ammeter 0-60A
5A CT Operated Ammeter 0-80A
5A CT Operated Ammeter 0-120A
5A CT Operated Ammeter 0-150A
5A CT Operated Ammeter 0-200A
5A CT Operated Ammeter 0-300A
Voltmeter, 250 Vac
Voltmeter, 500 Vac
45-65Hz Frequency Meter
72 mm
Panel Cut Out
56mm dia
72 mm
Depth
64 mm
50.5 mm
Scale Range
Full Scale Deflection
Stock no.
0-5 (10) A
10 A
287-2037
0-10 (20) A
20 A
287-2043
0-25 (50) A
50 A
287-2059
0-40 (80) A
80 A
287-2065
0-60 (120) A
5A
287-2087
0-80 (160) A
5A
287-2093
0-120 (240) A
5A
287-2100
0-150 (300) A
5A
287-2116
0-200 (400) A
5A
287-2122
0-300 (600) A
5A
287-2144
0 - 250 Vac
250V(ac)
287-2172
0 - 500 Vac
500V(ac)
287-2188
45-65 Hz
65 Hz
287-2194
Stock no.
287-2037
287-2043
287-2059
287-2065
287-2087
287-2093
287-2100
287-2116
287-2122
287-2144
287-2172
287-2188
a287-2194
Price
per
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
OM
S$
1+ 60·00
1+ 60·50
1+ 60·50
1+ 60·50
1+ 60·00
1+ 60·00
1+ 60·00
1+ 60·00
1+ 63·50
1+ 63·50
1+ 69·50
1+ 69·50
1+ 161·00
S$
Direct reading voltmeters and ammeters for measuring resistive loads
Note: Ammeter scales illustrated, voltmeter scales are similar
Supplied with: mounting brackets.
Description
Full Scale
Coil
Meter Depth Behind
Deflection Resistance Sensitivity Panel (mm)
–
53
Ammeter 48x48mm 5A
5A
30 mΩ
–
53
Ammeter 48x48mm 5A
5A
30 mΩ
(0-3 & 0-10 scale)
–
64
Ammeter 48x48mm 10A
10 A
8.8 mΩ
–
64
Ammeter 48x48mm 25A
25 A
1.4 mΩ
Ammeter 48x48mm 40A
40 A
0.9 mΩ
–
64
Voltmeter 48x48mm 150V
150 V
–
90 Ω/V
53
Voltmeter 48x48mm 300V
300 V
–
160 Ω/V
53
53
Voltmeter 48x48mm 500V
500 V
–
233 Ω/V
Ammeter 72x72mm 5A
5A
30 mΩ
–
48.5
Ammeter 72x72mm 5A
5A
30 mΩ
–
48.5
(0-3 & 0-10 scale)
–
57.5
Ammeter 72x72mm 10A
10 A
8.8 mΩ
–
57.5
Ammeter 72x72mm 25A
25 A
1.4 mΩ
Ammeter 72x72mm 40A
40 A
0.7 mΩ
–
57.5
Ammeter 72x72mm 60A
60 A
0.5 mΩ
–
60.5
Voltmeter 72x72mm 150V
150 V
–
43 Ω/V
48.5
Voltmeter 72x72mm 300V
300 V
–
57 Ω/V
48.5
48.5
Voltmeter 72x72mm 500V
500 V
–
97 Ω/V
–
58.5
Ammeter 96x96mm 5A
5A
30 mΩ
–
58.5
Ammeter 96x96mm 10A
10 A
8.8 mΩ
Ammeter 96x96mm 25A
25 A
1.4 mΩ
–
58.5
Ammeter 96x96mm 40A
40 A
0.7 mΩ
–
58.5
Ammeter 96x96mm 60A
60 A
0.5 mΩ
–
48.5
Voltmeter 96x96mm 150V
150 V
–
43 Ω/V
58.5
58.5
Voltmeter 96x96mm 300V
300 V
–
57 Ω/V
Voltmeter 96x96mm 500V
500 V
–
97 Ω/V
58.5
S$
Stock no.
Ammeter 5A, 48x48mm
Am. 5A (0-3 & 0-10) 48x48mm
Ammeter 10A, 48x48mm
Ammeter 25A, 48x48mm
Ammeter 40A, 48x48mm
Voltmeter 150V, 48x48mm
Voltmeter 300V, 48x48mm
Voltmeter 500V, 48x48mm
Ammeter 5A, 72x72mm
Am. 5A (0-3 & 0-10) 72x72mm
Ammeter 10A, 72x72mm
Ammeter 25A, 72x72mm
Ammeter 40A, 72x72mm
Ammeter 60A, 72x72mm
Voltmeter 150V, 72x72mm
Voltmeter 300V, 72x72mm
Voltmeter 500V, 72x72mm
Ammeter 5A, 96x96mm
Ammeter 10A, 96x96mm
Ammeter 25A, 96x96mm
Ammeter 40A, 96x96mm
Ammeter 60A, 96x96mm
Voltmeter 150V, 96x96mm
Voltmeter 300V, 96x96mm
Voltmeter 500V, 96x96mm
312-729
312-735
312-741
312-757
313-390
312-763
312-779
312-785
313-407
312-808
313-413
312-814
312-820
312-836
313-429
312-842
312-858
313-435
313-441
312-886
313-457
313-463
312-892
312-909
312-915
Price per
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
43·80
43·80
46·10
46·10
46·10
49·70
55·00
55·00
43·80
43·80
43·80
46·10
46·10
50·00
52·00
52·00
55·00
48·80
48·60
48·80
48·60
52·50
52·50
55·00
55·00
61
Fixing Stud
Size
M4 x 10 mm
M4 x 10 mm
Stock no.
M6 x 21 mm
M6 x 21 mm
M6 x 21 mm
M4 x 10 mm
M4 x 10 mm
M4 x 10 mm
M4 x 10 mm
M4 x 10 mm
312-741
312-757
313-390
312-763
312-779
312-785
313-407
312-808
M6 x 19 mm
M6 x 19 mm
M6 x 19 mm
M8 x 22 mm
M4 x 10 mm
M4 x 10 mm
M4 x 10 mm
M4 x 20 mm
M6 x 20 mm
M6 x 20 mm
M6 x 20 mm
M8 x 22 mm
M4 x 20 mm
M4 x 20 mm
M4 x 20 mm
313-413
312-814
312-820
312-836
313-429
312-842
312-858
313-435
313-441
312-886
313-457
313-463
312-892
312-909
312-915
312-729
312-735
S$
S$
S$
S$
Accessories
Description
Terminal cover for 48x48 meter
Terminal cover for 72x72/96x96
meter
Stock no.
Price
per
OM
S$
804-767
804-751
unit
unit
1+
1+
2·20
2·20
www.rssingapore.com
Many more leading brands from over 2,500 suppliers available online
1473
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Panel Meters
CT Operated DIN Moving Iron Ammeters
Low Current Battery Charge Moving
Magnet Meter
90° scale arc, accuracy class 1.5
Manufactured to BS89/IEC51
Frequency range 15 to 400Hz
Operating temperature range –25 to +40°C
Flame retardant case to UL94V0
Panel cut out: 68 x 68mm, 92 x 92mm
Terminal covers supplied separately (see accessories)
61
Ammeters available to accuracy
±8% for battery charger
applications
Resistance; 1.5mΩ
Snap-in panel fixing
Electrical connection via 25mm x
1/4in spade terminals, push-on
connectors or solder terminals
Ammeters with 5A FSD movements
Compatible with Current Transformers with 5A secondaries (stock No. 313-839)
Overload rating 10x FSD for 5 seconds
Note: Scales for CT operated meters must be purchased separately
Supplied with: Mounting brackets
Full Scale Deflection
Coil Resistance
5A
30 mΩ
Description
Depth Behind Panel
Fixing Stud Size
Stock no.
72x72mm DIN M-I Ammeter 5A
96x96mm DIN M-I Ammeter 5A
Price per
183-010
183-111
unit
unit
OM
1+
1+
Accuracy
60.5 mm
M4 x 10 mm
S$
S$
S$
47·50
49·80
90° scale arc, accuracy class 1.5
Manufactured to BS89/IEC51
Frequency range 15 to 400Hz
Operating temperature range: –25 to +40°C
Flame retardant case to UL94V0
Panel cut out: 68 x 68mm, 92 x 92mm
Terminal covers supplied separately (see accessories)
Ammeters with 5A movements and 6x overlaod capacity
Read 5A nominal with an extended movement up to 30A
Compatible with Current Transformers with 5A secondaries (stock No. 313-839)
Designed to withstand short duration overloading
Note: Scales for CT operated meters must be purchased separately. Eg: 533-0744, 533-7874, 533-0659,
533-7880, 533-0750, 533-0665, 533-0671, 533-0687, 183-234, 381-0850, 183-032, 183-048, 381-0866, 183262, 183-060, 183-076, 183-026
Supplied with: Mounting brackets
5/30A
30 mΩ
Description
Depth Behind Panel
Fixing Stud Size
Stock no.
72x72mm 5/30A with overload
96x96mm 5/30A with overload
Price per
183-212
183-284
unit
unit
S$
1+
1+
46·60
44·80
S$
S$
Signal input 180 to 300V a.c., 45-65Hz Operating temperature -25°C to 40°C
Coil impedance 41kΩ
Frequency Meter 48x48 mm
Frequency Meter 72x72 mm
Frequency Meter 96x96 mm
Price per
312-791
312-864
313-772
unit
unit
unit
OM
S$
S$
S$
Stock no.
Price
per
OM
S$
804-767
804-751
unit
unit
1+
1+
2·20
2·20
S$
Accuracy
30 A
50 A
80 A
100 A
Height
Width
Depth
8%
1474
244-913
244-929
unit
unit
Howard Butler
Price per
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
43·20
43·20
49·10
49·10
S$
S$
Solid-state, compact one-piece unit
10 bar LED display
Single flashing LED signal for low battery energy reserve
alert at 70% discharge
Alternate flashing LED’s alert for battery empty status at
80% discharge
Two reset methods: Open Circuit Reset (OCR) – upon
reconnection to battery when cell voltage ≥2.09V; High
Voltage Reset (HVR) – when unit measures 2.35V/cell for 6
continuous minutes
4.8mm tab terminals
Note: Meter is not intended to measure the charge state of batteries subject to extended periods of
inactivity since it does not account for self-discharge effects.
31.1 mm
53 mm
33.6 mm
27.5 mm
40.6 mm
33.5 mm
Description
12 V
24 V
S$
OM
S$
1+
1+
28·30
30·63
S$
OM = Order Multiple a New product to range
Depth Behind Panel
Panel Cut Out
35 mm
36.8 x 24.1 mm
Stock no.
Price
per
OM
S$
533-4184
unit
1+
85·00
533-4190
unit
1+
85·00
533-4207
unit
1+
85·00
S$
S$
Voltmeter range: 0 to 5Vdc
Supply voltage: 24Vdc
Single flashing bar signals low battery energy reserve
alert at 70% discharge
Double flashing bar alerts for battery empty status at 80%
discharge
10-segment tri-colour (5 green, 3 yellow, 2 red) LED
display (stock no. 533-4229) or 10-segment backlit LCD
(stock no. 533-4235) options
Compact IP65 rated unit (front and rear)
Compatible with Curtis motor speed controllers that feature Curtis Battery Discharge Indicator (BDI)
output
For use with dc and rectified ac
only
Suppressed zero scale
Coloured zones monitor state of
battery charge
Snap-in panel fixing
Electrical connections 25mm x
1/4in spade terminals, push-on
connectors or solder terminals
Price per
S$
enGage I LED/LCD Voltmeter
Moving Iron, Battery Condition Indicator
Stock no.
Stock no.
244-935
244-941
244-957
244-963
24V LED Battery Meter - Gel
Battery
24V LED Battery Meter - Wet
Battery
12V LED Battery Meter - Wet
Battery
All have an operating temperature range of -20 to +40°C
Full Scale Deflection
7·10
7·10
7·90
±5 %
S$
Moving Iron/Moving Magnet, Battery
Charge
Accuracy
S$
1+
1+
1+
For use with DC and
rectified AC only
Suitable for high current
battery charger applications
Case fitted with black and
white bezel
Snap-in panel or U-clip fixing
Stud terminal electrical
connections
Size 82 x 68 mm
Description
Terminal cover for 48x48 meter
Terminal cover for 72x72/96x96
meter
OM
High Current Battery Charge Moving
Magnet Meter
Height
Width
Depth
1+ 129·00
1+ 129·00
1+ 135·00
Accessories
Description
Price per
unit
unit
unit
Model 906 LED Battery Status Meter
45 to 65Hz, 240V, 90° scale arc, accuracy class 1
Meters have integral scales
Manufactured to BS89/IEC51
Flame retardant case to UL94V0
Supplied with: mounting brackets.
Stock no.
244-834
244-840
244-856
Digital Battery Indicators
DIN Standard Frequency Meter
Description
Stock no.
Full Scale Deflection
60.5 mm
M4 x 10 mm
OM
Full Scale Deflection
4A
8A
10 A
CT Operated DIN Moving Iron Ammeters
with Overload
Full Scale Deflection
Coil Resistance
8%
S$
24V enGage I LED Voltmeter
24V enGage I LCD Voltmeter
Depth Behind Panel
Panel Cut Out
Stock no.
533-4229
533-4235
Price per
unit
unit
28.8 mm
23.8 x 36.7 mm
OM
S$
1+
1+
37·60
56·00
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Panel Meters
Model 3000R enGage II LCD Dual
Voltage Monitor & Hour Meter
Current Transformers Suitable for 5A f.s.d.
Meters
Solid-state microprocessor LCD instrument
Dual function: operates as a voltage monitor and an hour
meter
Data back-up provided without the need for battery power
using built-in EEPROM
Maximum current rating: 35mA @ 15Vdc
Mounting bracket and integrated connector included
Note: Hour meter is non-resettable. Mounting panel thickness
must be between 0.8mm and 6.4mm.
Depth
Depth Behind Panel
59.6 mm
53.6 mm
Stock no.
533-4241
Panel Cut Out
Toroidal Current Transformer
Ø 52 mm
Price per
OM
S$
1+
95·00
unit
S$
S$
Power consumption 2.5VA
Accuracy class 1
For use with 5A moving iron meters or cam-operated selector
switches
Full scale deflection depends on number of conductor turns
through toroid as follows: 120A/0 (conductor passed straight
through toroid); 60A/2; 40A/3; 30A/4; 20A/6; 15A/8; 10A/12
Secondary winding epoxy resin insulated
Suitable for 50/60Hz
BS7627/IEC185
Supplied with: integral mounting bracket, 83mm fixing centres
Ratio
Shunts
294-9266
60mV Ammeter Brass-Ended Shunt
Voltage Rating
60 mV Meter Centres
Terminal Centres
10 mm
Current
Resistance Height Depth Width
Rating (A)
(mΩ)
(mm) (mm) (mm)
10
6
22.3
9.5 117.5
60
1
31.8 12.5 120.5
Current Rating (A)
Stock no.
10
60
95.3 mm
Stock no.
313-902
313-930
Price per
313-902
313-930
OM
S$
1+
1+
64·50
82·50
unit
unit
S$
S$
75mV Ammeter Shunt - Plate Type
For use with DIN dc ammeters or any panel meter with a full scale
deflection of 75mV @ 75Ω (1mA)
Class 1.5 accoracy (±1.5%)
Can be mounted directly on the meter
Voltage Rating
Height
Depth
75 mV
31 mm
10 mm
Current Rating
Width
Terminal Centres
Meter Centres
Stock no.
100 mA
1A
3A
10 A
30 A
257-329
257-341
257-357
257-363
257-565
48 mm
6.5 mm
16 → 32 mm
Price per
OM
S$
1+
1+
1+
1+
1+
20·70
20·70
20·90
28·10
29·10
unit
unit
unit
unit
unit
S$
S$
Current
Rating (A)
100
300
Depth
(mm)
12.5
19
Width
(mm)
Stock no.
120.5
146
313-788
313-794
10 mm
95.3 mm
Price
per
unit
unit
S$
S$
Current Rating
20 mA
200 mA
2A
20 A
Stock no.
257-379
257-385
257-391
257-408
Price per
unit
unit
unit
unit
Description
Ratio
1VA 40A class 3
1VA 50A class 1
1.5VA 60A class 1
1.5VA 80A class 1
2.5VA 100A class 1
2.5VA 150A class 1
2.5VA 200A class 0.5
8:1
10:1
12:1
16:1
20:1
30:1
40:1
25:5A 2.5VA 14 mm
40:5A 2.5VA 14 mm
60:5A 2.5VA 14 mm
80:5A 2.5VA 14 mm
1+ 76·00
1+ 132·00
86 mm
80 mm
S$
1+
1+
1+
1+
19·80
19·80
20·90
25·20
331-597
331-474
331-351
331-345
331-339
a331-430
331-452
Price per
unit
unit
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
1+
1+
23·80
23·80
23·80
25·80
25·30
30·20
27·50
S$
S$
Stock no.
287-3125
287-3131
287-3153
287-3169
Price per
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
28·50
28·50
28·40
28·40
S$
S$
Universal Mounting Current Transformer 26mm Aperture
Width
Meter Centres
OM
Stock no.
75 x 54.5 x 58 mm
Description
Converts digital panel meters with 199.9mV full scale deflection
into ammeters
Accuracy class I (±1%)
Mounted on rear pillars of 3.5 digit LED DIN meters
Also suitable for any digital meter with a full scale deflection of
199.9mV and a high input impedance
Current connectors M4 screw terminals; solder pad meter
connectors
200 mV
23 mm
50·00
S$
S$
200mV Digital Ammeter Shunt
Voltage Rating
Height
1+
S$
A range of compact moulded case current
transformers suitable for primary currents from 40A
to 300A with built in sealable terminal covers. For
transforming various primary currents into 5A standard secondary
using up to 20mm diameter cables.
DIN rail mounting clip supplied
Built in sealable terminal covers
Mounting feet supplied
Narrow width: 45mm
Dimensions: H65 x W45 x D30mm
21mm aperture
Conforms to IEC185, BS 7626, BSEN 60044-1and IEC 60044-1
Rated system voltage: 0.72/3kV
Ambient temperature range: -30 to 85°C
Continuous current: 1.2 x rated current
Size
OM
S$
Three built-in fixing methods: Base and DIN rail mounting
Case moulded in impact polyester with built-in hinged terminal cover
Cables up to 14mm outside diameter, or a busbar 14mm wide
Accuracy Class 1 (60 & 80A) or Class 3 (25 & 40A)
Power consumption 2.5VA, 50/60Hz
For use with 5A moving iron meters or cam-operated selector switches
Secondary winding epoxy resin insulated
BS7627/IEC185
Class 1 shunts for use with DIN ammeters or any panel
meter with a full scale deflection of 75mV @ 75Ω (1 mA)
Terminal Centres
Meter Centres
unit
OM
Multi Mounting Current Transformer 14mm Aperture
75mV Ammeter Shunt - Brass Ended
75 mV
31.8 mm
Price per
Compact Busbar/ Base Mounting Current
Transformers - Series 13
For use with DIN dc ammeters or any panel meter with a
full scale deflection of 60mV and an input impedance of
75Ω or more.
Voltage Rating
Height
120/5 A
Stock no.
All have a class 1 accuracy of 1%.
61
S$
S$
Three built-in fixing methods: Base, DIN-rail & Busbar mounting
Case moulded in high-impact polyester with built in hinged terminal cover
Cables up to 26mm outside diameter, bars up to 30mm wide, or a
conducting bush 24mm wide
Accuracy Class 1, Power consumption 2.5VA, 50/60Hz
For use with 5A moving iron meters or cam-operated selector switches
Secondary winding epoxy resin insulated
Enclosed to IP20
Temperature range: -20 to 70°C
Conforms to BS7627/IEC185
Size
Description
120:5A 2.5VA 26 mm
150:5A 2.5VA 26 mm
200:5A 2.5VA 26 mm
300:5A 2.5VA 26 mm
75 x 54.5 x 58 mm
Stock no.
287-3175
287-3181
287-3197
287-3210
Price per
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
29·20
29·60
32·70
36·30
S$
S$
www.rssingapore.com
Visit our website for additional price information and exciting promotions
1475
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Panel Meters
Moulded Case Current Transformer – 24mm
Aperture
Split-core Current Transformer
61
Two multi-ratio split-core
current transformers with
four or five built-in current
ratios in one product
Can be installed into
existing systems without
disconnecting cables or
busbar connections
Suitable for use with
analogue, digital and
energy meters
Accuracy class 1 (±1%)
Ambient temperature range: -30°C to 80°C
Frequency range: 50-60Hz
Insulation rating: 3kV for 1 minute
Continuous current: 1.2 x rated current
418-3604
Ratio
Burden
Ratio
Burden
533-0621
100:5
1.5VA
200:5
2.5VA
200:5
3VA
400:5
5VA
300:5
5VA
600:5
5VA
400:5
5VA
800:5
5VA
Power consumption 2.5VA, 50/60Hz
Accuracy class 1
20 or 30mm busbar mounting
Suitable for circular conductors 24 aperture
Maximum aperture for bar conductors 30x10mm (type 6)
Operating temperature range –30 to +85°C
Secondary terminals M5 studs with lock washers, nuts and
terminal cover
Full scale deflection currents can be selected by passing more
than one conductor turn through the centre of the transformer,
see adjacent table
Protection to IP54
BS7627/IEC185 and IEC60044-1
Conforms to BS 3938-1973 and IEC
CE marked in compliance with relevant European Directives
Manufactured to ISO 9001
Supplied with: base mounting feet and M5 captive nuts.
1000:5
5VA
CT Ratio
Dimensions (mm)
Stock No.
418-3604
533-0621
A
40
65
Description
Stock no.
Split-core CT 100-400:5A
Split-core CT 200-1000:5A
B
127
132
C
40
38
Price per OM
418-3604
533-0621
unit
unit
S$
D
78
95
S$
E
35
30
S$
1+ 148·00
1+ 148·00
Description
Split-core CT 100:5 A
Split-core CT 200:5 A
Split-core CT 300:5 A
Split-core CT 400:5 A
Split-core CT 500:5 A
Split-core CT 600:5 A
Stock no.
533-0637
533-0643
331-581
331-604
331-575
331-480
Price per
unit
unit
unit
unit
unit
unit
OM = Order Multiple
93 mm
70 mm
120:5 A
150:5 A
200:5 A
400:5 A
Stock no.
313-839
257-802
257-818
257-830
3 Turns
40
50
66.7
100
4 Turns
30
37.5
50
75
Depth
Price per
45 mm
OM
S$
1+
1+
1+
1+
36·40
39·20
41·30
39·20
unit
unit
unit
unit
5 Turns
24
30
40
60
S$
S$
Moulded Case Current Transformer - 35mm
Aperture
Ratio
100:5A
200:5A
300:5A
400:5A
500:5A
600:5A
Accuracy Class
3
1
1
1
1
1
OM
S$
1+
1+
1+
1+
1+
1+
86·00
86·00
78·00
78·00
81·00
81·00
Load
2.5VA
2.5VA
2.5VA
5VA
5VA
5VA
S$
www.rssingapore.com
1476
Height
Width
Ratio
Clip-Together Split Core Current
Transformer
Split current transformers
with unique clip-together
feature enabling high speed
permanent installation
Can be installed into existing
networks without
disconnecting cables or
busbars
Ambient temperature range:
-30°C to 80°C
Frequency range: 50-60Hz
Insulation voltagel: 3kV for 1 minute
Continuous current: 1.2 x rated current
Enclosure flame retardancy: UL94VO
Supplied with: Moulded case with 1m flying lead
Description
Split core current transformer 100A:5A
Split core current transformer 200A:5A
Split Core current transformer 300:5A
Split Core current transformer 400:5A
Split Core current transformer 500:5A
Split Core current transformer 600:5A
120:5
150:5
200:5
300:5
Full Scale Deflection (A)
1 Turn
2 Turns
120
60
150
75
200
100
300
150
Stock no.
533-0637
533-0643
331-581
331-604
331-575
331-480
S$
Power consumption 2.5VA, 50/60Hz
Accuracy class1
20, 30 or 40mm busbar mounting
Suitable for circular conductors 35mm aperture
Maximum aperture for bar conductors 40x10mm (type 7)
Operating temperature range –30 to +85°C
Secondary terminals M5 studs with lock washers, nuts and
terminal cover
Full scale deflection currents can be selected by passing more
than one conductor turn through the centre of the transformer,
see adjacent table
Protection to IP54
BS7627/IEC185 and IEC60044-1
Conforms to BS 3938-1973 and IEC
CE marked in compliance with relevant European Directives
Manufactured to ISO 9001
Supplied with: base mounting feet and M5 captive nuts
Height
Width
CT Ratio
500:5
600:5
800:5
Ratio
500:5 A
600:5 A
93 mm
70 mm
Depth
Full Scale Deflection (A)
1 Turn
2 Turns
500
250
600
300
800
400
Stock no.
313-801
313-817
Price per
unit
unit
70 mm
3 Turns
166.7
200.0
266.7
4 Turns
125
150
200
OM
S$
1+
1+
42·50
42·50
5 Turns
100
120
160
S$
S$