Leaburg Hatchery Fish Liberation Truck

advertisement
Project #:
15-051
R & E Grant Application
15-17 Biennium
Leaburg Hatchery Fish Liberation Truck
Project Information
R&E Project
Request:
Total Project:
Start Date:
End Date:
Organization:
$113,000
$248,000
12/7/2015
6/30/2017
Oregon Department of Fish and Wildlife
Applicant Information
Name:
Address:
Telephone:
Email:
Erik Withalm
90700 Fish Hatchery Rd.
Leaburg, OR 97489
541-896-3294 x221
erik.j.withalm@state.or.us
Past Recommended or Completed Projects
Number
09-165
11-046
Name
Leaburg Hatchery Aquatic Education Park
Leaburg Hatchery Salmon Viewing Access
Status
Completed
Completed
Last Modified/Revised: 2/26/2016 7:21:13 AM
Project #: 15-051
Leaburg Hatchery Fish Liberation Truck
Page 1 of 8
Location Information
Where is it?
The project will not occur on any property
Project Summary
Project Summary
Please provide a couple sentence summary of the proposal.
The purpose of the project is to replace a 24 year old, standard transmission fish liberation truck
at Leaburg Hatchery with a new automatic transmission truck equipped with an upgraded life
support system to maximize fish hauling efficiency, decrease operating and maintenance costs,
and increase employee safety.
Overall Project Goals
Describe the primary goals or outcomes of the entire project, including elements not requesting
funding from R&E.
Decrease operating and maintenance costs and improve employee safety by replacing one of
the old fish liberation trucks stationed at Leaburg Hatchery.
Maximize fish hauling efficiency by installing an upgraded life support system on the new
liberation truck and adding a back up pump.
Primary objectives of R&E funding
Please describe the measurable objectives for the R&E portion of the funding request.
Replace the liberation truck at Leaburg Hatchery while reusing the existing stainless steel tank.
Upgrade the life support system from the old truck and install a back up recirculation pump on
the replacement truck.
Current Situation/Justification
Please describe the current situation and explain why this funding is needed.
The truck slated for replacement is a 1992 International with 177,000 total miles and has been
averaging $4,000 a year in maintenance and repair costs. Annual mileage is 5,500 miles with
an average operating cost of $1.40 per mile which is over twice what a new truck costs. Despite
the extensive annual repair work, it still leaks oil, the heater and A/C operate at extremes, and it
continues to billow blue exhaust which has health and safety concerns for employees working
around the truck and is also not a good example coming from a natural resource agency. It's a
standard transmission which is difficult to operate in traffic or train new employees to operate.
The truck is shared by 5 employees, yet there are few to no adjustment capabilities for the seat,
steering wheel, and mirrors. The life support system is old, needs an engine overhaul, and has
no back up available. The stainless steel water tank is in good shape and will be reused. The
funding will be used to buy a replacement truck and upgrade the life support system to include a
back up pump.
Recreation and Commercial Benefit
This project will provide benefits to:
Last Modified/Revised: 2/26/2016 7:21:13 AM
Project #: 15-051
Leaburg Hatchery Fish Liberation Truck
Page 2 of 8
Recreational fisheries
Commercial fisheries
Explain how this project will contribute to current (and/or potential) fishing opportunities, access, or
fisheries management.
Leaburg Hatchery produces 465,000 (165,000 lbs.) rainbow trout for Willamette basin
waterbodies and 108,000 (24,000 lbs.) summer steelhead for the McKenzie River. With the
exception of 28,000 steelhead that are direct released into the McKenzie River, all the fish are
trucked out of the facility. Leaburg Hatchery has five Commercial Driver's License holding
employees and operates two liberation trucks. The rainbow trout program is Leaburg's largest
and primary focus, stocking fish into 25 waterbodies from Eugene to Portland. Trout stocking is
a year-round activity occurring 43 weeks a year with a total of about 190 individual waterbody
stockings. The trucks are also used to transport and stock fish for youth fishing events, fishing
clinics, and Free Fishing Day in Eugene. Approximately 1,200 returning adult summer
steelhead are recycled back into the McKenzie River for recreational anglers which require
another 15 truck trips. Leaburg's trucks make an additional 6-8 trips a year to transfer or
distribute 22,000 summer steelhead and 70,000 Chinook from other facilities for recreational
and commercial programs. This project will provide a more reliable and economical means of
transport to support Leaburg's extensive recreational fish stocking programs throughout the
Willamette Valley.
Is this project part of an approved Salmon-Trout Enhancement Program (STEP) activity?
No
This project has been identified as a priority for:
Local/watershed
Basin/regional
Identify any plan or other document that identifies this priority.
Trout stocking in the Willamette Basin for recreational fisheries to fulfill USACE Mitigation
Agreements and the McKenzie River Subbasin Plan.
Summer steelhead smolts and adults are transported and released to support recreational
fisheries as part of the McKenzie River Subbasin Plan.
This project is intended to benefit the following species:
Spring Chinook Salmon
Summer Steelhead
Rainbow Trout
This project will benefit anglers or fishery by providing:
Angling Opportunity
Education/Outreach
Hatcheries/Propagation/Liberation
Angling Opportunity
This project will:
Improve the opportunity for anglers to catch fish (better stocked fish, trapping)
Education/Outreach
This project will:
Support established education and outreach programs by providing fish for youth angling
Last Modified/Revised: 2/26/2016 7:21:13 AM
Project #: 15-051
Leaburg Hatchery Fish Liberation Truck
Page 3 of 8
events, fishing clinics, and Free Fishing Day events. Many of the waterbodies stocked by
Leaburg are featured in Lane County's "50 Places to Fish in Lane County" brochure, as well as
ODFW's Trout 365 campaign and "Easy Angling Oregon" guide. Additional outreach
opportunities are provided for volunteers to ride-along and assist on fish liberation trips.
The main focus of this project is to:
Support established education program
Is this education/outreach associated with ODFW efforts?
Yes
Angler education
Outdoor skills
ODFW facility
This education/outreach effort will target:
Youth (< 18 years old)
Adults (18 years old or more)
Families (Youth and Adult family members/mentors)
New anglers
Current anglers
Returning anglers (those who used to fish but don't currently)
Underserved populations
School groups
Number of people targeted by this proposal:
Estimate the average amount of time that each attendee will participate in the proposed effort.
Explain the duration/frequency of the proposed outreach effort.
Education and outreach support will be provided for the life of the truck.
Will the developed materials be available for use by other organizations or the public(i.e curriculum,
teaching techniques, educational strategies, materials)?
No
Hatcheries/Propagation/Liberation
Hatchery Name:
Leaburg Hatchery
This is a:
State hatchery
As a result of this request hatchery production will:
Maintain
This project will:
Address a need identified on the ODFW Hatchery Maintenance Priority list
Reduce the impacts of hatchery operations (i.e. reduce disease, stray rates or interbreeding)
Restore, rehabilitate, modify, or replace existing liberation equipment
Add new or upgrade liberation equipment
Improve safety of hatchery operations
Improve staff efficiency of hatchery operations
Improve energy efficiency of hatchery operations
Improve effectiveness of hatchery operations (i.e. improve survival or return to angler)
Last Modified/Revised: 2/26/2016 7:21:13 AM
Project #: 15-051
Leaburg Hatchery Fish Liberation Truck
Page 4 of 8
Fish produced at this facility are for:
Sport harvest
Commercial harvest
Mitigation
Project Description
Schedule
Activity
Invitation to bid sent to truck dealers.
New truck purchased.
Tank taken off old truck and installed on new truck.
Life support system upgraded/installed on new truck.
Date
Dec, 2016
Jan, 2017
Mar, 2017
June, 2017
RE Funding
Yes
Yes
Yes
Yes
Permits
Permit
Secured?
Date Expected
No
Project Design and Description
Please describe in detail the methods or approach that will be used to achieve the project objectives.
The new truck will be an automatic transmission, single axle diesel truck with at least 330 HP
and a gross vehicle weight rating of 33,000 lbs. The configuration of the new truck will be
modeled after the old truck whereby the stainless steel tank will be directly bolted to the frame.
The life support system will be designed to include two recirculation pumps and will be installed
by ODFW staff.
Engineering
Does the project involve capital improvement, engineering, site grading or other construction?
No
Project Management and Maintenance
What is the life expectancy of R&E funded construction, structures, equipment, supplies, data or
fishery?
The new trucks are expected to have a life expectancy of around 25 years.
Who is responsible for long term management, maintenance, and oversight of the project beyond
what is funded by R&E.
The new truck will be incorporated into the facility's written "Equipment Maintenance Plan".
Maintenance will be conducted by hatchery staff and professional truck repair shops.
Maintenance and repair costs will be paid by the Leaburg Hatchery Operations and
Maintenance Budget and the West Region Fish Liberation Budget. Maintenance will occur as
recommended by the manufacturer in addition to the mandatory annual ODOT safety inspection.
Will the project require ongoing maintenance?
Yes
Expected ongoing maintenance includes regularly scheduled oil changes, tire replacement when
needed, and annual ODOT safety inspections.
Is there a plan to collect baseline data and to conduct monitoring efforts to measure the effectiveness
Last Modified/Revised: 2/26/2016 7:21:13 AM
Project #: 15-051
Leaburg Hatchery Fish Liberation Truck
Page 5 of 8
of the project?
Not necessary
Project Funding
Funding
Have you applied for OWEB funding for this project?
No
Other Funding Source
Type
Secured
Dollar Value
ODFW
Other
Secured
125000
ODFW
In-Kind
Pending
5000
Truck Dealer
Cash
Pending
Total
5000
135000
Comments
Savings realized by utilizing existing stainless steel
tank.
ODFW staff time swapping over tanks and upgrading
life support systems.
Trade-in value for old truck.
Last Modified/Revised: 2/26/2016 7:21:13 AM
Project #: 15-051
Leaburg Hatchery Fish Liberation Truck
Page 6 of 8
Budget
Item
Unit Number
Unit Cost
In-kind or noncash
contributions
Funding from
other sources
R&E Funds
Total Costs
PROJECT MANAGEMENT
0
0
SUBTOTAL(1)
0
0
0
0
0
0
0
0
200
25
SUBTOTAL(2)
5000
5000
0
0
0
0
5000
5000
0
0
SUBTOTAL(3)
0
0
0
0
0
0
0
0
0
0
SUBTOTAL(4)
0
0
0
0
0
0
0
0
0
0
SUBTOTAL(5)
0
0
0
0
0
0
0
0
0
0
SUBTOTAL(6)
0
0
0
0
0
0
0
0
1
2
110000
4000
0
0
5000
0
105000
8000
110000
8000
1
125000
125000
0
0
125000
SUBTOTAL(7)
125000
5000
113000
243000
0
SUBTOTAL(8)
0
0
0
0
0
0
0
0
130000
5000
113000
248000
IN-HOUSE PERSONNEL
ODFW staff time to swap over tank.
CONTRACTED SERVICES
TRAVEL
SUPPLIES/MATERIALS
EDUCATION/OUTREACH
EQUIPMENT
Truck
Recirculation Pump
Stainless Steel Tank - reused from old
truck
FISCAL ADMINISTRATION
0
BUDGET
TOTAL
Last Modified/Revised: 2/26/2016 7:21:13 AM
Project #: 15-051
Leaburg Hatchery Fish Liberation Truck
Page 7 of 8
Additional Files
Click a link to view that particular file.
Old Liberation Truck
Old Liberation Truck Cab
Recirculation Pump
Signature Page
Truck Bid
Last Modified/Revised: 2/26/2016 7:21:13 AM
Project #: 15-051
Leaburg Hatchery Fish Liberation Truck
Page 8 of 8
February 15, 2016
Prepared For:
STATE OF OREGON FISH & WILDLIFE
SETH MORGAN
17330 SE Evelyn St.
Clackamas, OR 97015-9514
(503)657 - 2000
Reference ID: 4x2 tanker2
Presented By:
Brattain International Trucks, Inc.
Barney Newman
61 NE Columbia Blvd.
Portland OR 97211 (503)285-9300
Model Profile
2017 7600 SBA 4X2 2010 (SA667)
APPLICATION:
MISSION:
Water Tank
Requested GVWR: 33000. Calc. GVWR: 37780
Calc. Start / Grade Ability: 39.68% / 4.63% @ 55 MPH
DIMENSION:
Wheelbase: 209.00, CA: 141.90, Usable CA: 138.90, Axle to Frame: 75.00
ENGINE, DIESEL:
{Navistar N13} EPA 2010, SCR, 370 HP @ 1700 RPM, 1350 lb-ft Torque @ 1000 RPM, 2100
RPM Governed Speed, 370 Peak HP (Max)
TRANSMISSION, AUTOMATIC:
{Allison 4000_RDS_P} 5th Generation Controls; Close Ratio, 6-Speed, With Double Overdrive;
On/Off Hwy; Includes Oil Level Sensor, With PTO Provision, Less Retarder
CLUTCH:
Omit Item (Clutch & Control)
AXLE, FRONT NON-DRIVING:
{Meritor MFS-16-143A} Wide Track, I-Beam Type, 16,000-lb Capacity
AXLE, REAR, SINGLE:
{Meritor RS-23-160} Single Reduction, 23,000-lb Capacity, With 200 Wheel Ends Gear Ratio: 4.89
CAB:
Conventional
TIRE, FRONT:
(2) 12R22.5 HSC1 (CONTINENTAL) 482 rev/mile, load range H, 16 ply
TIRE, REAR:
(4) 11R22.5 HDR2 (CONTINENTAL) 491 rev/mile, load range H, 16 ply
SUSPENSION, REAR, AIR, SINGLE: {Hendrickson PRIMAAX EX} 23,000-lb Capacity, 9.0" Ride Height, With Shock Absorbers
PAINT:
Cab schematic 100GS
Location 1: 9219, Winter White (Std)
Chassis schematic N/A
1
Proposal: 14591-01
Vehicle Specifications
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
Code
SA66700
Description
Base Chassis, Model 7600 SBA 4X2 2010 with 209.00 Wheelbase, 141.90 CA, 138.90 Usable CA, and 75.00
Axle to Frame.
1CAJ
FRAME RAILS Heat Treated Alloy Steel (120,000 PSI Yield); 10.866" x 3.622" x 0.433" (276.0mm x 92.0mm
x 11.1mm); 456.0" (11582mm) Maximum OAL
1LEH
LICENSE PLATE HOLDER Single Plate, Swing Type, Mounted Below Front Bumper
1LMY
BUMPER, FRONT Full Width, Aerodynamic, Chrome Plated Steel; 0.189" Material Thickness
1VAX
TOW PIN, FRONT (2)
1WHL
WHEELBASE RANGE 195" (495cm) Through and Including 264" (670cm)
2ARU
AXLE, FRONT NON-DRIVING {Meritor MFS-16-143A} Wide Track, I-Beam Type, 16,000-lb Capacity
Notes
: The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension;
Brake System; Brakes, Front Air Cam; Wheels; Tires.
3ADE
SUSPENSION, FRONT, SPRING Parabolic, Taper Leaf; 16,000-lb Capacity; With Shock Absorbers
Includes
: SPRING PINS Rubber Bushings, Maintenance-Free
Notes
: The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension;
Brake System; Brakes, Front Air Cam; Wheels; Tires.
4091
BRAKE SYSTEM, AIR Dual System for Straight Truck Applications
Includes
: BRAKE LINES Color and Size Coded Nylon
: DRAIN VALVE Twist-Type
: GAUGE, AIR PRESSURE (2) Air 1 and Air 2 Gauges; Located in Instrument Cluster
: PARKING BRAKE CONTROL Yellow Knob, Located on Instrument Panel
: PARKING BRAKE VALVE For Truck
: QUICK RELEASE VALVE Bendix On Rear Axle for Spring Brake Release: 1 for 4x2, 2 for 6x4
: SLACK ADJUSTERS, FRONT Automatic
: SLACK ADJUSTERS, REAR Automatic
: SPRING BRAKE MODULATOR VALVE R-7 for 4x2, SR-7 with relay valve for 6x4
Notes
: Rear Axle is Limited to 23,000-lb GAWR with Code 04091 BRAKE SYSTEM, AIR and Standard Rear Air Cam
Brakes Regardless of Axle/Suspension Ordered.
4193
BRAKES, FRONT, AIR CAM 16.5" x 6", Includes 24 SqIn Long Stroke Brake Chambers
Notes
: The following features should be considered when calculating Front GAWR: Front Axles; Front Suspension;
Brake System; Brakes, Front Air Cam; Wheels; Tires.
4732
DRAIN VALVE {Berg} Manual; With Pull Chain, for Air Tank
4AZJ
AIR BRAKE ABS {Bendix AntiLock Brake System} Full Vehicle Wheel Control System (4-Channel) With
Automatic Traction Control
4EBD
AIR DRYER {Meritor Wabco System Saver 1200} with Heater
Includes
: AIR DRYER LOCATION Inside Left Rail, Back of Cab
4EXU
BRAKE CHAMBERS, REAR AXLE {Bendix EverSure} 30/30 Spring Brake
4EXV
BRAKE CHAMBERS, FRONT AXLE {Bendix} 24 SqIn
2
Proposal: 14591-01
Vehicle Specifications
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
Code
4LAA
Description
SLACK ADJUSTERS, FRONT {Haldex} Automatic
4LGA
SLACK ADJUSTERS, REAR {Haldex} Automatic
4NDB
BRAKES, REAR, AIR CAM S-Cam; 16.5" x 7.0"; Includes 30/30 Sq.In. Long Stroke Brake Chamber and Spring
Actuated Parking Brake
Notes
: The following features should be considered when calculating Rear GAWR: Rear Axles; Rear Suspension;
Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR; Wheels; Tires.
4SPM
AIR COMPRESSOR {Bendix BA-921 Head Unload} 15.9 CFM Capacity, Single Cylinder
4WRJ
AIR COMPRESSOR DISCHARGE LINE 1/2" ID to 5/8" ID Teflon Hose, With Stainless Steel Braid; to Air Dryer
5710
STEERING COLUMN Tilting and Telescoping
5CAL
STEERING WHEEL 2-Spoke, 18" Diam., Black
5PTB
STEERING GEAR (2) {Sheppard M-100/M-80} Dual Power
7BEP
EXHAUST SYSTEM Switchback Horizontal Aftertreatment Device, Frame Mounted Right Side Under Cab;
Includes Single Vertical Tail Pipe, Frame Mounted Right Side Back of Cab
Includes
: EXHAUST HEIGHT 10' Exhaust Height - Based on Empty Chassis with Standard Components (+ or - 1"
Height)
7SDK
ENGINE COMPRESSION BRAKE by Jacobs; for N13 Engines, With Selector Switch and On/Off Switch
7WBA
TAIL PIPE (1) Turnback Type, Bright, for Single Exhaust
7WCR
EXHAUST HEIGHT 10' 11"
8000
ELECTRICAL SYSTEM 12-Volt, Standard Equipment
Includes
: DATA LINK CONNECTOR For Vehicle Programming and Diagnostics In Cab
: FUSES, ELECTRICAL SAE Blade-Type
: HAZARD SWITCH Push On/Push Off, Located on Top of Steering Column Cover
: HEADLIGHT DIMMER SWITCH Integral with Turn Signal Lever
: HEADLIGHTS (2) Sealed Beam, Round, with Chrome Plated Bezels
: JUMP START STUD Located on Positive Terminal of Outermost Battery
: PARKING LIGHT Integral with Front Turn Signal and Rear Tail Light
: RUNNING LIGHT (2) Daytime, Included With Headlights
: STARTER SWITCH Electric, Key Operated
: STOP, TURN, TAIL & B/U LIGHTS Dual, Rear, Combination with Reflector
: TURN SIGNAL SWITCH Self-Cancelling for Trucks, Manual Cancelling for Tractors, with Lane Change
Feature
: WINDSHIELD WIPER SWITCH 2-Speed with Wash and Intermittent Feature (5 Pre-Set Delays), Integral with
Turn Signal Lever
: WINDSHIELD WIPERS Single Motor, Electric, Cowl Mounted
: WIRING, CHASSIS Color Coded and Continuously Numbered
8518
CIGAR LIGHTER Includes Ash Cup
8718
POWER SOURCE Cigar Type Receptacle without Plug and Cord
8GGN
ALTERNATOR {Bosch LH160} Brush Type, 12 Volt 160 Amp. Capacity, Pad Mount
8HAE
BODY BUILDER WIRING Rear of Frame; Includes Sealed Connectors for Tail/Amber Turn/Marker/ Backup/
Accessory Power/Ground and Sealed Connector for Stop/Turn
8MUE
BATTERY SYSTEM {International} Maintenance-Free (4) 12-Volt 2600CCA Total
3
Proposal: 14591-01
Vehicle Specifications
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
Code
8RBK
Description
CB ANTENNA (2) {Pana-Pacific} Full Wave; 4.0' Length Includes "International" Name on Top
8RCB
CB RADIO Accommodation Package; Header Mounted; Feeds From Accessory Side of Ignition Switch;
Includes Power Source and Two Antenna Bases With Wiring
Notes
: NOT INCLUDED: Antenna
8RMB
RADIO AM/FM/CD/WB/Clock/Bluetooth/USB Input/3MM Auxiliary Input, MP3, Apple Device Play & Control,
Bluetooth for Phone & Music, with Multiple Speakers
8VAY
HORN, ELECTRIC Disc Style
8VUH
BATTERY BOX COVER Polished Aluminum
8VUL
BATTERY BOX Steel With Plastic Cover, 18" Wide, 2, 3, or 4 Battery Capacity, Mounted Left Side Back of
Cab
8WBW
JUMP START STUD Remote Mounted
Includes
: JUMP START STUD Mounted to Battery Box
8WCK
POWER SOURCE, TERMINAL TYPE 2-Post
8WCL
HORN, AIR Black, Single Trumpet, Air Solenoid Operated
8WDG
BACK-UP ALARM {Preco 1059} Electronic; Solid State, Dual Function, 112 dBA
8WGL
WINDSHIELD WIPER SPD CONTROL Force Wipers to Slowest Intermittent Speed When Park Brake Set and
Wipers Left on for a Predetermined Time
8WJV
BATTERY DISCONNECT SWITCH {Joseph Pollak} for Cab Power Disconnect Switch; Lever Operated,
Disconnects Power to PDC, Does Not Disconnect Charging Circuits, Cab Mounted
8WLN
FOG LIGHTS (2) {Peterson} Clear, Halogen, Rectangular
Notes
: Fog Lights are Not Driving Lights
8WMA
SWITCH, TOGGLE, FOR WORK LIGHT Lighted; on Instrument Panel and Wiring Effects for Customer
Furnished Back of Cab Light
8WPH
CLEARANCE/MARKER LIGHTS (5) {Truck Lite} Amber LED Lights, Flush Mounted on Cab or Sunshade
8WXG
STARTING MOTOR {Mitsubishi Electric Automotive America 105P} 12-Volt, with Soft-Start
Notes
: This starter is designed to work reliably without the need for thermal overcrank protection and provides the
same warranty coverage as starters with thermal overcrank protection.
8XAH
CIRCUIT BREAKERS Manual-Reset (Main Panel) SAE Type III With Trip Indicators, Replaces All Fuses
Except For 5-Amp Fuses
8XGT
TURN SIGNALS, FRONT LED, Includes LED Side Marker Lights, Mounted on Fender
9585
FENDER EXTENSIONS Rubber
9HAD
GRILLE Chrome
9HAN
INSULATION, UNDER HOOD for Sound Abatement
9HBN
INSULATION, SPLASH PANELS for Sound Abatement
9WAC
BUG SCREEN Front End; Mounted Behind Grille
9WBR
FRONT END Tilting, Fiberglass, With Three Piece Construction Includes Long Hood, Sloped Front
4
Proposal: 14591-01
Vehicle Specifications
2017 7600 SBA 4X2 2010 (SA667)
Code
10060
February 15, 2016
Description
PAINT SCHEMATIC, PT-1 Single Color, Design 100
Includes
: PAINT SCHEMATIC ID LETTERS "GS"
10761
PAINT TYPE Base Coat/Clear Coat, 1-2 Tone
10UAD
VEHICLE REGISTRATION IDENTITY ID for 49 States, Excluding California
11001
CLUTCH Omit Item (Clutch & Control)
12772
ANTI-FREEZE Red, Extended Life Coolant; To -40 Degrees F/ -40 Degrees C, Freeze Protection, for N13
Engines
12864
BLOCK HEATER, ENGINE {Phillips} 120 Volt/1500 Watt
Includes
: BLOCK HEATER SOCKET Receptacle Type; Mounted below Drivers Door
12BCN
ENGINE, DIESEL {Navistar N13} EPA 2010, SCR, 370 HP @ 1700 RPM, 1350 lb-ft Torque @ 1000 RPM,
2100 RPM Governed Speed, 370 Peak HP (Max)
12THT
FAN DRIVE {Horton Drivemaster} Direct Drive Type, Two Speed With Residual Torque Device for Disengaged
Fan Speed
Includes
: FAN Nylon
12UNX
FEDERAL EMISSIONS {Navistar N13} EPA, OBD and GHG Certified for Calendar Year 2016
12VBC
AIR CLEANER Single Element
Includes
: AIR CLEANER with Vacuator
: GAUGE, AIR CLEANER RESTRICTION Air Cleaner Mounted
12WEG
COLD STARTING EQUIPMENT Automatic; With Engine ECM Control
12WTA
FAN DRIVE SPECIAL EFFECTS Fan Cooling Ring with Fan Shroud Effects, Engine Mounted
12WZE
EMISSION COMPLIANCE Federal, Does Not Comply With California Clean Air Idle Regulations
12XAV
RADIATOR Aluminum; Welded, Front to Back Down Flow System, 1429 SqIn, 740 SqIn CAC, 1099 SqIn 3
Core LTR
13ATR
TRANSMISSION, AUTOMATIC {Allison 4000_RDS_P} 5th Generation Controls; Close Ratio, 6-Speed, With
Double Overdrive; On/Off Hwy; Includes Oil Level Sensor, With PTO Provision, Less Retarder
13WAW
OIL COOLER, AUTO TRANSMISSION {Modine} Water to Oil, for Automatic Transmissions
13WBL
TRANSMISSION SHIFT CONTROL {Allison} Push-Button Type; for Allison 3000 & 4000 Series Transmission
13WLM
TRANSMISSION OIL Synthetic; 63 thru 76 Pints
13WUC
ALLISON SPARE INPUT/OUTPUT for Rugged Duty Series (RDS); General Purpose Trucks, Construction
13WYU
SHIFT CONTROL PARAMETERS Allison 3000 or 4000 Series Transmissions, 5th Generation Controls,
Performance Programming
14051
AXLE, REAR, SINGLE {Meritor RS-23-160} Single Reduction, 23,000-lb Capacity, With 200 Wheel Ends . Gear
Ratio: 4.89
Includes
: REAR AXLE DRAIN PLUG (1) Magnetic, For Single Rear Axle
Notes
: When Specifying Axle Ratio, Check Performance Guidelines and TCAPE for Startability and Performance
5
Proposal: 14591-01
Vehicle Specifications
2017 7600 SBA 4X2 2010 (SA667)
Code
14TBZ
February 15, 2016
Description
SUSPENSION, REAR, AIR, SINGLE {Hendrickson PRIMAAX EX} 23,000-lb Capacity, 9.0" Ride Height, With
Shock Absorbers
Notes
: The following features should be considered when calculating Rear GAWR: Rear Axles; Rear Suspension;
Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR; Wheels; Tires.
: When Specifying Axle Ratio, Check Performance Guidelines and TCAPE for Startability and Performance
14WMG
AXLE, REAR, LUBE {EmGard FE-75W-90} Synthetic Oil; 30 thru 39.99 Pints
15DYP
DEF TANK 9.5 U.S. Gal. 36.0L Capacity, Frame Mounted Outside Left Rail, Under Cab
15LKW
FUEL/WATER SEPARATOR {Davco Fuel Pro 382} with Fuel Heated Fuel Heater, Thermostatic Fuel
Temperature Control, Mounted In Standard Position, Includes Water-In-Fuel Light
15SJZ
FUEL TANK Top Draw; Non-Polished Aluminum, 26" Diam., 80 U.S. Gal., 302 L Capacity Mounted Left Side,
Under Cab
15WCS
FUEL COOLER Less Thermostat; Mounted in Front of Cooling Module
16030
CAB Conventional
Includes
: ARM REST (2) Molded Plastic; One Each Door
: COAT HOOK, CAB Located on Rear Wall, Centered Above Rear Window
: CUP HOLDERS Two Cup Holders, Located in Lower Center of Instrument Panel
: DOME LIGHT, CAB Rectangular, Door Activated and Push On-Off at Light Lens, Timed Theater Dimming,
Integral to Console, Center Mounted
: GLASS, ALL WINDOWS Tinted
: GRAB HANDLE, CAB INTERIOR (1) "A" Pillar Mounted, Passenger Side
: GRAB HANDLE, CAB INTERIOR (2) Front of "B" Pillar Mounted, One Each Side
: INTERIOR SHEET METAL Upper Door (Above Window Ledge) Painted Exterior Color
: STEP (4) Two Steps Per Door
16HBA
GAUGE CLUSTER English With English Electronic Speedometer
Includes
: GAUGE CLUSTER (6) Engine Oil Pressure (Electronic), Water Temperature (Electronic), Fuel (Electronic),
Tachometer (Electronic), Voltmeter, Washer Fluid Level
: ODOMETER DISPLAY, Miles, Trip Miles, Engine Hours, Trip Hours, Fault Code Readout
: WARNING SYSTEM Low Fuel, Low Oil Pressure, High Engine Coolant Temp, and Low Battery Voltage
(Visual and Audible)
16HGH
GAUGE, OIL TEMP, AUTO TRANS , for Allison Transmission
16HGN
GAUGE, AIR APPLICATION
16HHE
GAUGE, AIR CLEANER RESTRICTION {Filter-Minder} With Black Bezel Mounted in Instrument Panel
16HKT
IP CLUSTER DISPLAY On Board Diagnostics Display of Fault Codes in Gauge Cluster
16HLJ
GAUGE, DEF FLUID LEVEL
16JNV
SEAT, DRIVER {National 2000} Air Suspension, High Back With Integral Headrest, Cloth, Isolator, 1 Chamber
Lumbar, 2 Position Front Cushion Adjust, -3 to +14 Degree Back Angle Adjust
Includes
: SEAT BELT 3-Point, Lap and Shoulder Belt Type
16RPX
SEAT, PASSENGER {National} Air-Suspension, High Back With Integral Headrest, Cloth, Isolated, 1 Chamber
Lumbar, 2 Position Front Cushion Adjustment, -3 to +14 Degree Seat Back Adjustment
16SEE
GRAB HANDLE Chrome; Towel Bar Type With Anti-Slip Rubber Inserts; for Cab Entry Mounted Left Side Only
at "B" Pillar
6
Proposal: 14591-01
Vehicle Specifications
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
Code
16SND
Description
MIRRORS (2) {Lang Mekra} Rectangular, Power Both Sides, Thermostatically Controlled Heated Heads, Black
Heads, Brackets and Arms, Breakaway Type, 7.55" x 14.1" Integral Convex Both Sides, 102" Inside Spacing
16VCC
SEAT BELT All Orange; 1 to 3
16WBY
ARM REST, RIGHT, DRIVER SEAT
16WBZ
ARM REST, LEFT, PASSENGER SEAT
16WCT
AIR CONDITIONER {Blend-Air} With Integral Heater & Defroster
Includes
: HEATER HOSES Premium
: HOSE CLAMPS, HEATER HOSE Mubea Constant Tension Clamps
: REFRIGERANT Hydrofluorocarbon HFC-134A
16WHJ
HOSE CLAMPS, HEATER HOSE {Breeze} Belleville Washer Type
16WJS
INSTRUMENT PANEL Center Section, Flat Panel
16WJU
WINDOW, POWER (2) and Power Door Locks, Left and Right Doors, Includes Express Down Feature
16WKY
HVAC FRESH AIR FILTER
16WLS
FRESH AIR FILTER Attached to Air Intake Cover on Cowl Tray in Front of Windshield Under Hood
16WRZ
CAB INTERIOR TRIM Premium
Includes
: "A" PILLAR COVER Molded Plastic
: CAB INTERIOR TRIM PANELS Cloth Covered Molded Plastic, Full Height; All Exposed Interior Sheet Metal
is Covered Except for the Following: with a Two-Man Passenger Seat or with a Full Bench Seat the Back Panel
is Completely Void of Covering
: CAB SOUND INSULATION Includes Dash Insulator and Engine Cover Insulator, Premium Floormat, and
Sound Dampening Patches
: CAB, INTERIOR TRIM, CLOSEOUT Lower Dash Closeout Panel; Molded Plastic; Under Instrument Panel
Driver Side
: CONSOLE, OVERHEAD Molded Plastic; With Dual Storage Pockets with Retainer Nets, CB Radio Pocket,
Speakers, and Reading Lights
: COURTESY LIGHT (2) Mounted In Front Map Pocket Left and Right Side
: DOOR TRIM PANELS with Cloth Insert on Bolster Driver and Passenger Doors
: FLOOR COVERING Rubber, Black
: GAUGE, TEMPERATURE, AMBIENT Includes Wiring and Sensor With Display Unit Mounted in Cluster
: HEADLINER Soft Padded Cloth
: INSTRUMENT PANEL TRIM Molded Plastic with Black Center Section
: STORAGE POCKET, DOOR (2) Molded Plastic (Carpet Texture), Full-Length; Driver and Passenger Doors
: SUN VISOR (3) Padded Vinyl: 2 Moveable (Front-to-Side) Primary Visors, Driver Side with Vanity Mirror and
Toll Ticket Strap, plus 1 Auxiliary Visor (Front Only), Driver Side
16WSK
CAB REAR SUSPENSION Air Bag Type
16XWD
SUNSHADE, EXTERIOR Aerodynamic, Painted Roof Color; Includes Integral Clearance/Marker Lights
27DMB
WHEELS, FRONT DISC; 22.5" Non-Polished Aluminum, 10-Stud (285.75MM BC) Hub Piloted, Flanged Nut,
Metric Mount, 8.25 DC Rims; With Steel Hubs
Notes
: Compatible Tire Sizes: 11R22.5, 12R22.5, 255/70R22.5, 255/80R22.5, 265/75R22.5, 275/70R22.5,
275/80R22.5, 295/75R22.5, 295/80R22,5
28DMB
WHEELS, REAR DUAL DISC; 22.5" Non-Polished Aluminum, 10-Stud (285.75MM BC) Hub Piloted, Flanged
Nut, Metric Mount, 8.25 DC Rims; With Steel Hubs
Notes
7
Proposal: 14591-01
Vehicle Specifications
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
Code
Description
: Compatible Tire Sizes: 11R22.5, 12R22.5, 255/70R22.5, 255/80R22.5, 265/75R22.5, 275/70R22.5,
275/80R22.5, 295/75R22.5, 295/80R22,5
29WLK
WHEEL BEARING, FRONT, LUBE {EmGard FE-75W-90} Synthetic Oil
7382135423
(4) TIRE, REAR 11R22.5 HDR2 (CONTINENTAL) 491 rev/mile, load range H, 16 ply
7382155419
(2) TIRE, FRONT 12R22.5 HSC1 (CONTINENTAL) 482 rev/mile, load range H, 16 ply
Cab schematic 100GS
Location 1: 9219, Winter White (Std)
Chassis schematic N/A
Services Section:
40118
WARRANTY Standard for Paystar 5000, and Workstar 7500/7600, Effective with Vehicles Built January 2,
2015 or Later, CTS-2003Z
2.5# FIRE EXTINGUISHER
TRIANGLE FLARE KIT
8
Proposal: 14591-01
Financial Summary
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
(US DOLLAR)
Description
Price
Net Sales Price:
Memo Item(s):
Total Federal Excise Tax
Note: Memo item(s) shown here are
included in the above Net Sales Price.
$108,771.00
$0.00
Please feel free to contact me regarding these specifications should your interests or needs change. I am confident you will be
pleased with the quality and service of an International vehicle.
Approved by Seller:
Accepted by Purchaser:
Official Title and Date
Firm or Business Name
Authorized Signature
Authorized Signature and Date
This proposal is not binding upon the seller without
Seller's Authorized Signature
Official Title and Date
The TOPS FET calculation is an estimate for reference purposes only. The seller or retailer is responsible for calculating
and reporting/paying appropriate FET to the IRS.
9
Proposal: 14591-01
Weight Summary
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
Graphics are provided as visual aids only and are not intended to represent the actual scale, shape, or color of the truck or its components.
All weights are represented in lbs.
Truck
Bumper to Axle
Wheelbase
Axle to Frame
Axle to Back Cab
Cab to Axle
Usable CA
CA Reduction Adjustment
Fuel-Diesel(Gals)
DEF(Gals)
Before the Cab
# Weight
CG
Body/Trailer
(BA) 45.9 Body Length
(WB) 209.00
(AF) 75.00
(ABC) 67.1
(CA) 141.9
138.9
3.00
0
0
#
Cab
Weight
CG
Payloads
Chassis
# Weight
1
0
Loads
Payload Weight:
Driver:
Fuel-Diesel(Lbs):
DEF(Lbs):
Chassis/Empty Weights
N/A Tractor Front Axle:
Tractor Rear Axle:
(BL)
CG
1
#
Body
Weight
CG
9,102
4,363
After the Body
# Weight
CG
Weight Distribution
Total Front Axle:
9,102
Total Rear Axle:
4,363
Total Weight:
13,465
0
0
0
0
Weights and clearances in this proposal are estimates only. Navistar, Inc. is not liable for any consequences resulting
from any differences between the estimated weights and clearances and the actual manufactured weights and clearances.
10
Proposal: 14591-01
Weight Summary
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
Weight Distribution
All weights are represented in lbs.
Truck
Front
Rear
Total
Chassis Weight
Chassis Weight:
Fuel:
DEF:
9,102
0
0
4,363 13,465
0
0
0
0
(Curb Weight): 9,102
4,363 13,465
Loads
Payloads:
Driver:
0
0
Axle Totals (Gross Weight): 9,102
0
0
0
0
4,363 13,465
Weight Ratings
Truck
Front
Rear
Axle(axle capacity)
Tire(tire capacity)
Suspension(suspension capacity)
Spring:
16,000 23,000
14,780 26,440
16,000 23,000
0
Fed Bridge Law (axle spread):
20,000 20,000
Wheel Combination
1-2
Load
Limit
13,465 47,000
Federal Total Vehicle Weight Limit: 80,000
Maximum Gross Vehicle Weight Rating (GVWR) 37,780 - Gross Vehicle Weight(GVW) 13,465 = 24,315 Reserves
Weight Summary
* Distributed weights are within capacity limits
11
Proposal: 14591-01
Electronic Parameters Summary
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
ENGINE, DIESEL (0012BCN)
ATTACHMENTS: 0007SDK (ENGINE COMPRESSION BRAKE) 0016030 (CAB) 0016HBA (GAUGE CLUSTER) 0012WEG (COLD
STARTING EQUIPMENT) 0012THT (FAN DRIVE)
Parameter
Value
UOM
Max Accelerator Vehicle Speed:7902
Vehicle Speed Limiter Override:7911
VSLO Speed Increment:7912
VSLO Maximum Activation Time:7914
VSLO Time Interval to Reset:7915
VSLO Time Duration Source:7934
Progressive Shift Enable:7744
Low Gear Ratio Break Point:7742
High Gear Ratio Break Point:7743
Low Gear Engine Speed Limit:7738
High Gear Engine Speed Limit:7739
Low Gear Engine Speed Range:7740
High Gear Engine Speed Range:7741
Min Gear Ratio for ProShift:7755
Gear Down Protection Enable:7714
Top Gr Minus 2 Light Ld VS Lim:7715
Top Gr Minus 1 Light Ld VS Lim:7716
Top Gr Minus 2 Heavy Ld VS Lim:7735
Top Gr Minus 1 Heavy Ld VS Lim:7736
Driver Reward Enable:7918
Driver Reward Mode:7930
74
0, DISABLE FEATURE OR FUNCTION
10
30
8.0
1, INTERVAL BASED ON REAL TIME CLOCK
0, DISABLE FEATURE OR FUNCTION
1.215000
0.000000000
1550.0
1600.0
200.0
200.0
0.50
0, DISABLE FEATURE OR FUNCTION
44
48
42
49
0, DISABLE FEATURE OR FUNCTION
2, BOTH ACCELERATOR AND CRUISE VEHICLE SPEED LIMIT
INCREASE
0, FUEL ECONOMY BASED REWARD SYSEM
6.00
6.25
6.40
25
18
10
150.0
-40.0
0
2
4
-2
600.0
1, ENABLE FEATURE OR FUNCTION
0.0
5.0
25
2100.0
0, DISABLE FEATURE OR FUNCTION
15.0
5.0
0, DISABLE FEATURE OR FUNCTION
0, DISABLE FEATURE OR FUNCTION
0, DISABLE FEATURE OR FUNCTION
20.0
15.0
5.0
150.0
16.0
80
0, DISABLE FEATURE OR FUNCTION
MPH
N/A
MPH
MIN
HOURS
N/A
N/A
N/A
N/A
RPM
RPM
RPM
RPM
N/A
N/A
MPH
MPH
MPH
MPH
N/A
N/A
Driver Reward Performance Crit:7925
Fuel Economy - Expected Level:7921
Fuel Economy - Good Level:7920
Fuel Economy - Excellent Level:7919
% Idle Time - Expected Level:7924
% Idle Time - Good Level:7923
% Idle Time - Excellent Level:7922
Driver Reward Ambient Temp H:7938
Driver Reward Ambient Temp L:7939
VS Lim Increase - Expected Lvl:7926
VS Lim Increase - Good Lvl:7927
VS Lim Increase - Excel Lvl:7928
VS Lim Decrease - Penalty Lvl:7929
Idle Engine Speed:8202
Idle Speed Adjustment Enable:8215
Idle Spd Adjust - Max Eng Spd:8212
Idle Spd Adjust - Bump Step:8216
Idle Spd Adjust Ramp Rate:8211
Maximum Standstill Eng Speed:7753
Idle Shutdown Mode:7400
ISD Time w/Park Brk Released:7401
ISD Time w/Park Brake Set:7404
ISD Latched Driver Override En:7407
ISD Ambient Temp Override En:7408
ISD Int Amb Temp Enable:7405
ISD Max Ambient Temp Override:7402
ISD Int Amb Temp Override:7406
ISD Min Ambient Temp Override:7403
ISD Max Engine Coolant Temp:7412
ISD Min Engine Coolant Temp:7413
ISD Idle Shutdown Max Eng Trq:7409
Upshift Indicator:8217
12
N/A
MPG
MPG
MPG
%
%
%
C
C
MPH
MPH
MPH
MPH
RPM
N/A
RPM
RPM
RPM/SEC
RPM
N/A
MIN
MIN
N/A
N/A
N/A
C
C
C
C
C
%
N/A
Proposal: 14591-01
Electronic Parameters Summary
2017 7600 SBA 4X2 2010 (SA667)
Cruise Control Enable:7600
CC Max Vehicle Speed:7604
CC Min Vehicle Speed:7603
Retarder Control Mode:7000
Retarder - Brake Pedal Delay:7001
Retarder - Accel Pedal Delay:7008
Retarder - Min Vehicle Speed:7002
CC Ovrspd Retard Activation En:7006
CC Overspeed for Min Retarder:7003
CC Ovrspd Retard Activation %:7005
CC Overspeed for Max Retarder:7004
Road Speed Limit Retarder Acti:7011
Retarder Ovride CC/RSL Acti:7012
AESC Control:7500
AESC In-cab Mode:7502
AESC Min Engine Speed:7522
AESC Max Engine Speed:7508
AESC Preset Engine Speed 1:7505
AESC Preset Engine Speed 2:7506
AESC Preset Engine Speed 3:7514
AESC Preset Engine Speed 4:7515
AESC Preset Engine Speed 5:7516
AESC Preset Engine Speed 6:7517
AESC Activate at Preset Speed:7528
AESC Ramp Up Rate:7507
AESC Ramp Down Rate:7524
AESC Bump Up/Down Step:7525
AESC In-cab Operator Interface:7503
AESC Disable w/ Clutch Pedal:7510
AESC Disable w/ Brake Pedal:7511
AESC Accel Pedal Mode:7513
AESC Max Engine Load:7519
AESC Control to Engine Load:7530
AESC Max Engine Load Time:7527
AESC Vehicle Speed Limit:7521
AESC Max Mobile Veh Spd:7501
AESC Eng Spd Limit w/VSS Fault:7518
AESC Force Fan On:9007
AESC Park Brake Override:7534
AESC Transfer Case Signal Mode:8910
AESC Splitshaft Veh SPD Dsply:9307
AESC Remote Accel Pedal Enable:7504
AESC Remote Accel Pedal Switch:8914
AESC Accel Max Eng Spd Ovrd:7520
Rem Accelerator Switch Input:9929
Preset Remote AESC Input Type:9932
Variable Remote AESC Input:9933
Rem Accelerator Position Input:9935
Engine Protection Mode:7700
Powertrain Protection Enable:7722
Max Torque w/o Vehicle Speed:7712
Highest Gear of Low Range:7718
Highest Gear Rat of Low Range:7745
Highest Gear of Int. Range:7748
Highest Gear Rat of Int. Range:7746
Highest Gear of High Range:7749
Highest Gear Rat of High Range:7747
Max Torque in Low Gear Range:7713
Max Torque in Int. Gear Range:7750
1, ENABLE FEATURE OR FUNCTION
74
25.0000
1, COMPRESSION BRAKE LATCHED WITH SERVICE BRAKE
0.50
0.80
2
1, ENABLE FEATURE OR FUNCTION
5
35
8
2, ENABLED, APS WILL NOT DISABLE BRAKE
1, SWITCH OFF WILL ONLY DISABLE CC BRAKE ACTIVATION
0, DISABLE FEATURE OR FUNCTION
2, VARIABLE ENGINE SPEED CONTROL SELECTED
600.0
1500.0
800.0
900.0
1000.0
1100.0
1200.0
1300.0
0, NO PRESET PRESELECTION
100.00
100.00
25.0
0, NO (OFF) OR DISABLE
1, ENABLE FEATURE OR FUNCTION
1, ENABLE FEATURE OR FUNCTION
1, AESC OVERRIDDEN BY ACCELERATOR PEDAL
100.0000
0, KICK OUT OF AESC ABOVE PROGRAMMED LIMIT
8
5.0000
5
1500
0, DISABLE FEATURE OR FUNCTION
1, ENABLE FEATURE OR FUNCTION
0, DRIVELINE
0, SPEED SENSOR LOCATED IN WHEEL RIM
0, DISABLE FEATURE OR FUNCTION
0, DISABLE FEATURE OR FUNCTION
1900.0
1, SAE J1939 MULTIPLEXED
0, DISCRETE (HARDWIRED) INPUT
0, DISCRETE (HARDWIRED) INPUT
1, SAE J1939 MULTIPLEXED
2, TWO WAY SHUTDOWN (OIL PRES, WATER TEMP)
0, DISABLE FEATURE OR FUNCTION
1350.0000
2
6.00
4
4.00
6
2.00
1350.0000
1350.0000
13
February 15, 2016
N/A
MPH
MPH
N/A
SEC
SEC
MPH
N/A
MPH
%
MPH
N/A
N/A
N/A
N/A
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
N/A
RPM/SEC
RPM/SEC
RPM
N/A
N/A
N/A
N/A
%
N/A
SEC
MPH
MPH
RPM
N/A
N/A
N/A
N/A
N/A
N/A
RPM
N/A
N/A
N/A
N/A
N/A
N/A
LB-FT
N/A
N/A
N/A
N/A
N/A
N/A
LB-FT
LB-FT
Proposal: 14591-01
Electronic Parameters Summary
2017 7600 SBA 4X2 2010 (SA667)
Max Torque in High Gear Range:7751
VSS Anti-Tamper Max Eng Speed:7901
Auxilllary Shutdown Input Type:9931
Veh Speed Sensor Antitampering:7905
Veh Overspd Threshold Level 1:7723
Veh Overspd Threshold Level 2:7724
Service Interval Enable
Fuel Used Service Interval:9501
Engine Hour Service Interval:9502
Veh Distance Service Interval:9503
Service Soon Percent to Notify:9507
Customer Unit Number:6605
Hard Braking Incident Counter:8904
Hard Braking Decel Threshold:8905
Vehicle Over-speed Indicator:7754
Customer Password:8700
1350.0000
1200.0
0, DISCRETE (HARDWIRED) INPUT
0, DISABLE FEATURE OR FUNCTION
60.000000
62.000000
0, DISABLE FEATURE OR FUNCTION
0
0
0
90
0
1, ENABLE FEATURE OR FUNCTION
7.40
0, FEATURE OR FUNCTION IS DISABLED
00000000
February 15, 2016
LB-FT
RPM
N/A
N/A
MPH
MPH
N/A
GALLONS
HOURS
MILES
%
N/A
N/A
MPH/SEC
N/A
N/A
These Electronic Parameters have been successfully finalized
14
Proposal: 14591-01
Performance TCAPE Summary
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
ENGINE/TRANSMISSION MATCHING
Sawtooth Details
Gear
Trans
Ratio
1C
2C
2L
3L
4L
5L
6L
3.51
1.91
1.91
1.43
1.00
0.74
0.64
Upshift Power Avail
Veh Spd
Eng Spd
(MPH)
(RPM)
0.0
1863
9.9
1888
17.6
1343
24.6
1407
33.2
1330
48.1
1425
66.1
1693
Govern Power Avail
Peak Power Comparison
Warn Msg
Veh Spd Eng Spd Gear Step 85% Range 90% Range
(MPH)
(RPM)
(%)
(%)
(%)
9.9
1978
N/A
110
95
17.6
1968
N/A
110
95
24.6
1879
N/A
110
95
33.2
1902
N/A
110
95
48.1
1925
N/A
110
95
66.1
1958
N/A
110
95
82.0
2100
N/A
110
95
@ - WHEELSLIP CAN OCCUR AT THE GRADE SHOWN. THE VEHICLE IS CAPABLE OF INCREASED GRADEABILITY IF MORE
WEIGHT IS PLACED ON THE DRIVE AXLES.
15
Proposal: 14591-01
Performance TCAPE Summary
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
STEADY STATE PERFORMANCE
Performance Results
LEVEL ROAD MAXIMUM SPEED
HI GEAR SPEED @ RATED RPM
55.0 MPH STEADY-STATE
Gear
Veh Spd
(mph)
Eng Spd
(rpm)
Fuel Econ
(mpg)
Grade
(%)
6L
6L
6L
82.5
82.0
55.0
2114
2100
1409
4.98
5.11
9.68
0.00
0.57
4.63
Notes
- Calculated Grade
Ability/Fuel Economy
VEHICLE ORDER CODING ERRORS MAY RESULT IF THE "LEVEL ROAD MAX SPEED" VALUE EXCEEDS THE "HI GEAR SPEED
@ RATED RPM" AND IS USED AS THE ENGINE PROGRAMMABLE VEHICLE SPEED LIMIT.
IF THE RESULTS CONTAIN " -----" , VEHICLE CANNOT ATTAIN THAT SPEED.
IF THE RESULTS CONTAIN "*****", THE ENGINE USED DOES NOT HAVE A FUEL MAP. FUEL ECONOMY CANNOT BE PREDICTED.
Recommendations / General Information
IDLE FUEL RATE : 0.76 GALS/HR @ 600.0 RPM
TORQUE CONVERTER : TC-521 STALL RATIO: 2.42
Fuel Economy Route: Normal Route - City, Suburban, and Highway
Key Fuel Economy Information
MILES PER GALLON
AVERAGE MPH
MISSION MINUTES
City
Suburban
Highway
6.72
19.2
29.47
9.54
40.1
51.65
9.13
54.6
173.26
Notes
IF THE RESULTS CONTAIN "*****", THE ENGINE USED DOES NOT HAVE A FUEL MAP. FUEL ECONOMY CANNOT BE PREDICTED.
16
Proposal: 14591-01
Performance TCAPE Summary
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
GRADEABILITY PERFORMANCE
Enroute - Full Throttle Upshift Performance
Gear
1C
Trans
Ratio
3.51
2C
1.91
2L
1.91
3L
1.43
4L
1.00
5L
0.74
6L
0.64
Veh Spd
(mph)
0.0
5.7
7.8
9.9
9.9
17.6
17.6
24.6
24.6
33.2
33.2
48.1
48.1
66.1
66.1
80.0
82.0
82.1
82.5
Eng Spd
(rpm)
1863
1888
1925
1978
1888
1968
1343
1879
1407
1902
1330
1925
1425
1958
1693
2050
2100
2102
2114
Whl Pwr
(hp)
0.00
223.38
258.45
260.57
224.59
262.41
306.73
329.41
314.05
326.13
305.52
318.90
311.17
303.91
326.00
272.65
255.68
251.52
218.48
Grade Warn Notes
(%)
Msg
48.79
@ STALL
48.79
@ 70% EFF
39.68
80% EFF
30.44
25.82
16.39
19.40
14.47
13.74
10.13
9.42
6.06
5.88
3.05
3.43
1.00
0.57
RATED RPM
0.50
0.00
LEVEL ROAD
STARTING / TOP GEAR PERFORMANCE
Gear
1C
Trans
Ratio
3.51
Veh Spd
(mph)
0.0
7.8
Eng Spd
(rpm)
Whl Pwr
(hp)
0.00
258.45
Grade Warn Notes
(%)
Msg
48.79
@ STALL
39.68
80% EFF - Calculated Start Ability
@ - WHEELSLIP CAN OCCUR AT THE GRADE SHOWN. THE VEHICLE IS CAPABLE OF INCREASED GRADEABILITY IF MORE
WEIGHT IS PLACED ON THE DRIVE AXLES.
THE TRANSMISSION WAS SIMULATED IN PERFORMANCE OPERATING MODE.
17
Proposal: 14591-01
Performance TCAPE Summary
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
ACCELERATION PERFORMANCE RESULTS
Acceleration Performance Grid
Acceleration Performance: TIME TO ACCELERATE ON A GRADE TO 55.0 (MPH) IS 23.81 (SECS)
Acceleration Performance Details
Gear
1C
2C
2L
3L
Time
(secs)
0.13
0.25
0.37
0.49
0.60
0.72
0.85
0.98
1.12
1.28
1.48
1.70
1.91
2.14
2.38
2.64
2.92
3.11
3.38
3.65
3.94
4.24
4.55
4.87
5.21
5.22
5.58
5.95
6.34
6.73
7.14
7.55
Distance
(feet)
0.1
0.4
0.8
1.4
2.2
3.1
4.3
5.7
7.6
9.7
12.9
16.4
20.4
24.9
30.0
35.9
42.5
47.2
54.4
62.2
70.7
79.9
89.9
100.7
112.7
113.0
126.4
140.7
155.9
172.1
189.4
207.8
Speed
(mph)
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
9.9
10.9
11.9
12.9
13.9
14.9
15.9
16.9
17.6
18.6
19.6
20.6
21.6
22.6
23.6
24.6
24.6
25.6
26.6
27.6
28.6
29.6
30.6
18
Notes
Proposal: 14591-01
Performance TCAPE Summary
2017 7600 SBA 4X2 2010 (SA667)
Gear
4L
5L
Time
(secs)
7.98
8.43
8.74
9.26
9.78
10.32
10.86
11.42
11.99
12.58
13.18
13.79
14.41
15.06
15.72
16.41
17.14
17.81
18.62
19.45
20.30
21.17
22.06
22.97
23.81
Distance
(feet)
227.4
248.6
263.5
288.9
315.7
343.7
373.2
404.1
436.6
470.6
506.3
543.8
583.1
624.4
667.9
714.3
764.2
810.9
868.9
929.4
992.5
1058.3
1126.9
1198.4
1265.1
Speed
(mph)
31.6
32.6
33.2
34.2
35.2
36.2
37.2
38.2
39.2
40.2
41.2
42.2
43.2
44.2
45.2
46.2
47.2
48.1
49.1
50.1
51.1
52.1
53.1
54.1
55.0
19
February 15, 2016
Notes
Proposal: 14591-01
Performance TCAPE Summary
2017 7600 SBA 4X2 2010 (SA667)
February 15, 2016
REQUIRED TCAPE INFORMATION
TCAPE Factors For Vehicle
Selected Rear Axle Gear Ratio(s):
Vehicle Vocation:
Road Surface Type:
Enroute PTO:
Fuel Economy Route:
ID Wheel Slip Conditions:
Engine Fan Type:
Parked PTO:
Road Governor/Cruise Ctrl:
Acceleration Grade (%):
Alternator (A):
Frontal Area (FT2):
Air Compressor (HP):
Vehicle Height (IN):
Steering Gear (HP):
Air Conditioner (HP):
Weight on Drive Axle (LBF):
Acceleration Vehicle Spd (MPH):
Speed Limit on Route (MPH):
Vehicle Width (IN):
Relative Drag Coefficient:
TIRE, FRONT
TIRE, REAR
4.89
MODERATE ON/OFF HIGHWAY
TYPICAL
NO
Normal Route - City, Suburban, and Highway
Yes
VISCOUS
NO
No
0.0
40
76
2.20
114
2.60
3.20
23000
55.0
61.0
96
85
2 - RADIAL NORMAL
4 - RADIAL NORMAL
Components
0002ARU
0004SPM
0005PTB
0008GGN
0012BCN
0012THT
0013ATR
0014051
0016030
0016WCT
0016XWD
07382135423
07382155419
AXLE, FRONT NON-DRIVING {Meritor MFS-16-143A} Wide Track, I-Beam Type, 16,000-lb Capacity
AIR COMPRESSOR {Bendix BA-921 Head Unload} 15.9 CFM Capacity, Single Cylinder
STEERING GEAR (2) {Sheppard M-100/M-80} Dual Power
ALTERNATOR {Bosch LH160} Brush Type, 12 Volt 160 Amp. Capacity, Pad Mount
ENGINE, DIESEL {Navistar N13} EPA 2010, SCR, 370 HP @ 1700 RPM, 1350 lb-ft Torque @ 1000 RPM, 2100 RPM
Governed Speed, 370 Peak HP (Max)
FAN DRIVE {Horton Drivemaster} Direct Drive Type, Two Speed With Residual Torque Device for Disengaged Fan
Speed
TRANSMISSION, AUTOMATIC {Allison 4000_RDS_P} 5th Generation Controls; Close Ratio, 6-Speed, With Double
Overdrive; On/Off Hwy; Includes Oil Level Sensor, With PTO Provision, Less Retarder
AXLE, REAR, SINGLE {Meritor RS-23-160} Single Reduction, 23,000-lb Capacity, With 200 Wheel Ends
CAB Conventional
AIR CONDITIONER {Blend-Air} With Integral Heater & Defroster
SUNSHADE, EXTERIOR Aerodynamic, Painted Roof Color; Includes Integral Clearance/Marker Lights
TIRE, REAR 11R22.5 HDR2 (CONTINENTAL) 491 rev/mile, load range H, 16 ply 11R22.5 HDR2 (CONTINENTAL) 491
rev/mile, load range H, 16 ply
TIRE, FRONT 12R22.5 HSC1 (CONTINENTAL) 482 rev/mile, load range H, 16 ply 12R22.5 HSC1 (CONTINENTAL)
482 rev/mile, load range H, 16 ply
TCAPE HAS BEEN DESIGNED TO GIVE ECONOMY AND PERFORMANCE PREDICTIONS WHICH HAVE BEEN SHOWN TO BE
TYPICAL FOR MOST OPERATIONS. HOWEVER, DUE TO OPERATING CONDITIONS, DRIVER INFLUENCES, AND OTHER
FACTORS, YOUR RESULTS MAY VARY FROM THOSE PREDICTED. ALSO, BECAUSE OF FUEL MAPPING PROCEDURES USED
BY VARIOUS ENGINE MANUFACTURERS, COMPARISONS OF FUEL ECONOMY RESULTS FOR DIFFERENT BRANDS OF
ENGINES MAY VARY FROM THOSE SHOWN.
NAVISTAR, INC. SHALL NOT BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS OR
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND THAT ARE INCURRED BY DEALER OR BY
DEALER'S CUSTOMERS AS A RESULT OF RELIANCE ON TCAPE, WHETHER THE CLAIM IS IN CONTRACT,TORT (INCLUDING
NEGLIGENCE), STRICT LIABILITY OR OTHERWISE.
20
Proposal: 14591-01
Turning Radius Summary
2017 7600 SBA 4X2 2010 (SA667)
Series:
Model:
Description:
Model Year:
February 15, 2016
7000
SA667
7600 SBA 4X2 2010
2017
Calculation Factors
Wheelbase:
209
Front Axle:
Description:
0002ARU
AXLE, FRONT NON-DRIVING, {Meritor MFS-16-143A}
Wide Track, I-Beam Type, 16,000-lb Capacity
Front Wheel:
Description:
0027DMB
WHEELS, FRONT, DISC; 22.5" Non-Polished Aluminum,
10-Stud (285.75MM BC) Hub Piloted, Flanged Nut, Metric
Mount, 8.25 DC Rims; With Steel Hubs
Front Tire:
Description:
07382155419
TIRES, 12R22.5 HSC1 (CONTINENTAL) 482 rev/mile, load
range H, 16 ply
Steering Gear:
Description:
0005PTB
STEERING GEAR, (2) {Sheppard M-100/M-80} Dual Power
Turning Radius Statistics
General Information
Inside Turn Angle:
Radial Overhang:
43 Degrees
30
Axle Information
KingPin Inclination:
KingPin Center:
6.25 Degrees
71.5
Turning Radius - Curb View
C
CI
CR
CH
TR
TW
- Curb Contact Length:
- Curb Clearance Increment:
- Curb Clearance Radius:
- Curb Height:
- Turning Radius:
- Tire Width:
16.14
6.04
32'1''
6''
31'7"
11.40
* All Measurements are in inches, unless otherwise specified.
This information is based on engineering information available at this time. Actual figures may vary. Navistar, Inc. cannot accept
liability for consequences due to this variance.
21
Proposal: 14591-01
Download