BILL OF QUANTITY ‐ SUB STATION & EXTERNAL ELECTRIFICATION WORK
Name of work:‐Construction of Centre for Excellence at King George Medical University, Lucknow.
S No
Description of Item
Unit
Qty
Rate Amount (Rs)
1 SUB HEAD 1‐SUB STATION EQUIPMENT :HT PANAL TRANSFORMER , LT , PANEL & DG SET
Supply and fixing of double pole structure TMPO switch 1 Set
80,000.00
80,000.00
S.I.T.C. Of 11 KV VCA panal totally enclosed fully interlocked meta clad floor mounting horizental draw out type with metering arrengement , protection 2 relays Unit Panel
1 Set
950,000.00
950,000.00
S.I.T.C. Of 800 kVA , 11/0.44 kv copper wound oil cooled tranformer 3 complete in all respects
1 Nos.
1,775,000.00
1,775,000.00
Supply, erection , testing and commissioning of 3 phase 415 volts 50 cycle per second 200 kva 1500 RMP Silent diesel Generator Set with Canopy.The engine shall include flysheel to suit flexible coupling with gaurd , air cleaner , blowern fan , heat exchanger , fuel pump , variable speed electronic governor, fuel fuel filter , lub oil filter and pump battery charger 24 volt batteries of compatible capacity and instrument panel comprising of switch with key , lub oil temprecher gauge , lub oil pressure gauge, water tempreture gause ,battery chargering ametre , safety control for low lub oil and highly cooling water tempsture with tripign etc.the alternator shall be self exited , self regulated , brusless and continiuosly rated for 50 KVA at 0.8 P.F.,3 phase 415 volts 50 cycle 4 wire system and shall be provided with static excitation unit , Altranator insulation shall be class 'F, suitable to withstand tropical condition and shall generally comply with B.S. 5000 and IS 4722. and 4 for Acadamic block and are for hostal block
2 Sets
2,350,000.00
4,700,000.00
1
S/I/T/C of fully automatic AMF panel form 200 KVA DG sets inears , contractors, relays , safety devices etcdoors type with require switching,
A
B
Supplying installetion testing & commissioning of L.T . Control Panel , indoor cubical type , dust and vermine proof , floor /wall mounting dead front contraction made of 16 SWG CRCA sheet steel , duty Poweder Coated having separate instrument , selector switches CTs , indicating lights , toggle switch , protection fuses on incomming & all in outgoing of 100 A & above shall all have amperemetter , selectro switeches CTs suitable rating PVC sleeved aluminium bus bar and complete with the following switchegears L&T or equaivalent Make , 5 including connection & interconnection etc.
GENERAL SUPPLY PANEL
INCOMING:
1250 A , 4 Pole Air Circuit Breaker (MDO) with necessary protection devices‐ 1 Nos.
OUTGOING:
800 A ,Pole Air Circuit Breaker (MDO)‐ 1 Nos.
630 A,Pole MCCB‐2 Nos.
400A ,Pole MCCB‐2 Nos.
250A ,Pole MCCB‐2 Nos.
100A ,Pole MCCB‐2 Nos.
INCOMING:
800 A ,Pole Air Circuit Breaker (MDO)
Necessary Protection Divices:‐ 1 Nos.
BUS‐BARS:
1000A, TPN AluminiumBus Bar with PVC heat shrink sleeving and mounted on non hygroscopic supports such as SMC/DMC on incoming side for proper adoption of cables and solids Aluminium links for jointing rising mains on outgoing side of A.C.B.‐ 1 Set
2 Sets
475,000.00
950,000.00
1 Nos.
2,150,000.00
2,150,000.00
1 Nos.
650,000.00
650,000.00
C
D
OUTGOING:
250a, 4 POLE MCCB ‐ 3 Nos.
160 A POLE MCCB‐ ‐ 3 Nos.
INCOMING:
630A, 4 POLE MCCB‐ 3 Nos.
800A TPN Aluminium Bus Bars with PVC heat shrink sleeving and m ounted on non hygroscopic such as SMC/DMC on incoming side for proper adoption of cables and solid Aluminium links for jointing rising mains on outgoing side of MCCB‐ 1 Set
OUTGOING:
250A,4 Pole MCCB‐ 3 Nos.
125 A, 4Pole MCCB‐ 3Nos.
INCOMING:
400 A , 4 Pole MCCB‐ 1 Nos.
1 Nos.
430,000.00
430,000.00
2 Nos.
350,000.00
700,000.00
500 A , TPN Aluminium Bus Bar with PVC PVC heat shrink sleeving and m ounted on non hygroscopic such as SMC/DMC on incoming side for proper adoption of cables and solid Aluminium links for jointing rising mains on outgoing side of MCCB‐ 1 Set
OUTGOING:
320A, 4 Pole MCCB‐ 1 Nos.
160A, 4 Pole MCCB‐ 2 Nos.
63A, 4 Pole MCCB‐ 2 Nos.
TOTAL(SUB HEAD‐1)
12,385,000.00
BILL OF QUANTITY ‐ CABLES
Name of work:‐Construction of Centre for Excellence at King George Medical University, Lucknow.
SCHEDULE NO.
SR. NO.
II
1
DESCRIPTION ITEM
QTY.
UNIT
RATE AMOUNT
CABLES
501
501(b)
501(i)
501(j)
501(k)
501(m)
501(r)
501(t)
Supply and laying of aluminium conductor PVC insulated armounred served sheathed cables 1100 Volts grade at depth of 750 mm below ground level over a cushion of 75 mm. Thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc.of suitable size or as directed by the engineer‐Incharge ,complete in all respect .The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
10 sq. Mm 2 core
16sq. Mm 4 core
25sq. Mm 3.5 core
35sq. Mm 3.5 core
70sq. Mm 3.5 core
240sq. Mm 3.5 core
400sq. Mm 3.5 core
503(b)
503(i)
Supply and fixing of brass nicle compression gland for PVC inculated & armounred served sheathed , underground cable including rubber ring etc complete in all respact . The armouring of the cable shall properly connected with the earth as 503 per direction of Engineer‐Incharge
10 sq. Mm 2 core
16sq. Mm 4 core
2
800
240
480
400
180
300
300
Mtr.
Mtr.
Mtr.
Mtr.
Mtr.
Mtr.
Mtr.
229.00
314.00
332.00
371.00
664.00
1,672.00
2,500.00
183,200.00
75,360.00
159,360.00
148,400.00
119,520.00
501,600.00
750,000.00
240 each
120 each
65.00
82.00
15,600.00
9,840.00
503(j)
503(k)
503(m)
503(r)
3
504(c)
504(d)
504(e)
504(f)
504(h)
504(cm)
4
a
506(f)
5
a
25sq. Mm 3.5 core
35sq. Mm 3.5 core
70sq. Mm 3.5 core
240sq. Mm 3.5 core
Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connecttion etc. Complete in all respect as per direction of the 504 Engineer‐incharge
10 sq. Mm 2 core
16sq. Mm 4 core
25sq. Mm 3.5 core
35sq. Mm 3.5 core
70sq. Mm 3.5 core
240sq. Mm 3.5 core
Supplying and lying of H.T. Cable at site the following size of cross linked polythen (XLPE) aluminium conductor cable of 11KV grade including the cost of the digging the trench , back 506 filling , necessary sand , bricks etc sa required.
H.T. Cable ‐ 120 sqmmX 3 Core
Supply and Making end terminating with outdoor/indoor type heat shrinkable termination kit for following size of 11 KV grade with pre moulded including the cost of the ferrules etc as required outdoor/indoor type heat shrinkable termination kit
TOTAL
80
60
40
20
each
each
each
each
92.00
126.00
137.00
299.00
7,360.00
7,560.00
5,480.00
5,980.00
1000
480
320
240
160
130
each
each
each
each
each
each
16.00
17.00
24.00
26.00
73.00
310.00
16,000.00
8,160.00
7,680.00
6,240.00
11,680.00
40,300.00
120 Mtr.
1,915.00
229,800.00
6 Set
18,000.00
108,000.00
2,417,120.00
BILL OF QUANTITY‐ LIFT MACHIN
Name of work:‐Construction of Centre for Excellence at King George Medical University, Lucknow.
SR. NO. SCHEDULE NO.
DESCRIPTION ITEM
V
SUB HEAD V LIFT MACHIN
1
S.I.T.C. OF 10 passenger machin roomless Elevater speed 1.00 mps (techanical ) specification as per attach sheet . Otis make
2 no. For acadamic block and 2 no. For hostal block
Hoist beam trapdoor facia plate and eaething divice
Automatic rescue divece
TOTAL (SUB HEAD ‐V)
QTY.
UNIT
4 Nos. 4 job
4 job
RATE AMOUNT
2,650,000.00
10,600,000.00
150,000.00
180,000.00
600,000.00
720,000.00
11,920,000.00
BILL OF QUANTITY :‐ SAFTY EQUIPMENT
Name of work:‐Construction of Centre for Excellence at King George Medical University, Lucknow.
SR. NO. SCHEDULE NO.
VII
1
DESCRIPTION ITEM
SUB HEAD VII SAFETY EQUIPMENT
3
4
5
UNIT
RATE AMOUNT
Provinding &Fixing Danger Plates made of mild steel atleast 2mm thick and vitereous enamelled , white on both side and with inscription in red colour on front side as required.
High Voltage ‐size 250mmX200mm
Low Voltage size 200mmX150mm
2
QTY.
Supply & erection of the first aid box as approved by St. John Ambulance Bridage /Indian Red Cross confirming to IS 2217‐1963
Supply & fixing of scock treat chart duly mounted on al wooden frame with 5mm thick glass as per required (approx from area 1.2 sqm)
Supply and laying 12mm thick checked rubber matting as reqiured Supply and rection of tools box as per specifications. TOTAL (SUB HEAD‐ VII)
8 Each
16 Each
250.00
250.00
2,000.00
4,000.00
1 Each
600.00
600.00
4 Each
1,000.00
4,000.00
10 Sqm
2,000.00
20,000.00
2 Set.
8,500.00
17,000.00
47,600.00
BILL OF QUANTITY‐ AIR CONDIONING WORK
Name of work:‐Construction of Centre for Excellence at King George Medical University, Lucknow.
SR. NO. SCHEDULE NO.
DESCRIPTION ITEM
QTY.
UNIT
RATE AMOUNT
NAME OF WORK : SUPPLY AND INSTALLATION AND FIXING OF SPLIT TYPE AIR CONDITIONER
IV
1
a
b
2
a
b
Supply & installetion of LG/Vediocan /Eqit Make High Wall Spilt Unit complete with Indoor Unit , condensing unit and cordless remote . 3 Star
1.5 TR CAPACITY
2.0 TR "Blue Point " make automatic voletage steblizer wall mounted wider rang with TDR Hi , low cut ISO ‐ 9001 certified 4KVA
5 KVA
3
Istallation charge of split ait conditioners complete with placement of out door and indoor unit of 1.5 TR/2.0 TR capacity
4
Supply & installetion of copper piping with fitting complete with Nitrile Rubber Insulation for connecting Indoor & outdoor Unit
5
6
Supply & installation of Drain Water PVC Pipe from indoor unit to outside drain point
Supply and laying of copper cable of 3 core X 2.5 sqrmm size from outdoor unit to power point.
25 Each
25 Each
32,889.00
39,900.00
822,225.00
997,500.00
25 Each
25 Each
4,549.00
5,005.00
0.00
113,725.00
125,125.00
50 Each
2,500.00
125,000.00
1000 Job
870.00
870,000.00
1000 rmt
105.00
105,000.00
1100 rmt
135.00
148,500.00
7
Supply and installation of MS STAND for outdoor unit
50 Each
1,475.00
73,750.00
8
Charges for making civil opening in walls for running of copper pipe of high wall split units,
50 Job
1,450.00
72,500.00
9
Supply of iron angle cage for outdoor unit of 1.5 TR / 2.0 TR split type air‐conditioner
50 Each
3,249.00
162,450.00
TOTAL
3,615,775.00
BILL OF QUANTITY‐ EXTERNAL LIGHTING
Name of work:‐Construction of Centre for Excellence at King George Medical University, Lucknow.
SR. NO. SCHEDULE NO.
III
DESCRIPTION ITEM
SUB HEAD III EXTERNAL LIGHTING
6
Supply of fixing of 7.0 long GI octogonal pole Supply and fixing of street light fitting 150 W HPSV
Constraction of suitable shallow foundation with M‐20 grade concrete for the above pole
Supply and fixing of 15 watt LED street light fitting complete
supply and fixing of 100 mm dia G.I. Pipe for cable laying fitting complete in all respect as per direction of Engineer‐Incharge
Supply and fixing of 25mmx3mm G.I. Clamps on surface complete in all respect s as approved by Engineer 710 Incharg (As per PS No. 710)
7
Supply of buying of 600 mm x600mmx6.0mm G,I. Plate vertically for earthing with its top at least 3 mtrs Below groun d level complete with 20mm dia GI pipe and funded for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15 mm dia GI pipe up to (switch board from approved to switch board the cost of GI pipe and GI pipe and GI wire will be extra). 30 cm sqr. C.I. frame with hinged cover masonary housing alternate layer of charcoal /coke and salt at least 150 mm thick airround etc. as per direction of Engineer Incharge 710 complete in all as per direction of E/i
1 486 II
2
3
4
5
TOTAL
QTY.
UNIT
RATE
AMOUNT
10 Nos.
10 Nos.
22,907.50
5,521.18
229,075.00
55,211.75
8 Job
10,752.50
86,020.00
8 Nos.
73,865.00
590,920.00
125 Rmt.
856.46
107,057.50
480 Rmt.
121.55
58,344.00
12 Nos.
3,791.43
45,497.10
1,172,125.35
BILL OF QUANTITY‐ EARTHING PROTECTION
Name of work:‐Construction of Centre for Excellence at King George Medical University, Lucknow.
DESCRIPTION ITEM
SR. SCHEDUL
NO. E NO.
SUB HEAD VI‐ EARTHING PROTECTION
VI
QTY.
UNIT
RATE
AMOUNT
EATHING FOR STATION
1
2
3
4
5
6
7
Earthing with Copper earth plate 600mmx600mmx3mm tick includindg accessories and provinding masonary enclosure with C.I. Cover plate having locking arrangement and watering pipe etc. (without chircoal or coke and salt ) complete as per existing code of 708 Practise IS 3043
Extra for using charcoal / coke and salt for G.I> or copper plate earthing electrode as required.
Earthing with GI earth plate 60mmx600mmx6mm thick including accessories and providing masonery enclosure with CI cove plate having locking arrangement and watering pipe etc (without charcole 703 or coke and salt) complete as per existing code of Practice is: 3043
Providing and fixing earth bus of 50mmx5.0mm copper strip on surface for connection etc as required.
Providing and fixing 25mmx5mm G.I. Strip in 40mm dia GI pipe from earth electrode as required
Provivding and fixing 25mmx5mm G.I. Srtip on surface or in recess for connections etc as required.
Riverting sweating & soldering of copper strip with another copper strip or any other metalic object as required.
TOTAL SUB HEAD‐VI
16 Set
7,325.73
117,211.60
16 Set
1,402.50
22,440.00
14 Each
3,791.43
53,079.95
200 Mtr.
1,402.50
280,500.00
250 Mtr.
172.98
43,243.75
300 Mtr.
143.06
42,916.50
150 Nos.
60.78
9,116.25
568,508.05
BILL OF QUANTITY - ELECTRICAL WORK (Internal)
Name of work:-Construction of Centre for Excellence at King George Medical University, Lucknow.
Sl.No.
1
P.S. No.
Description of Item
174 B
Wiring point for light with 1 sq. mm. FR PVC insulated multistrand
single core copper conductor cable in heavy guage rigid steel
conduit pipe partly concealed in the wall & partly laid in slab along
with the reinforcement before concreting, complete with 1.0 sqmm
copper earth continuity wire, modular type switch , GI modular type
box & 3 terminal ceiling rose /angle /batten holder complete in all
respects, as directed including matching colour wash.
Unit
each
Qty.
975
Rate
637.45
Amount
621,513.75
2
3
4
178 B
175 b
179 B
each
each
each
225
60
50
341.05
616.55
915.80
76,736.25
36,993.00
45,790.00
5
177 b
each
450
637.45
286,852.50
6
7
176 b
180 c
Same as above but for 5 A plug point on board
Same as above but for call bell point.
same as above but for exhaust fan with 1.5 sqmm copper wire and
1.5 sqmm copper wire for earth
same as above but for ceiling fan / fresh air fan with 1.0 sqmm
copper wire and 1.5 sqmm copper wire for earth
same as above but for 2 Way light point
same as above but for HPSV light with 1.5 sqmm copper wire and
1.5 sqmm copper wire for earth
Wiring for seperate plug point with 1.5 sq. mm. FR PVC insulated
multistrand single core copper conductor cable in heavy guage rigid
steel conduit pipe partly concealed in the wall & partly laid in slab
along with the reinforcement before concreting, complete with 1.5
sqmm copper earth continuity wire, modular type switch , GI modular
type box & 3 terminal ceiling rose /angle /batten holder complete in
all respects, as directed including matching colour wash.
each
each
20
10
756.20
1,078.25
15,124.00
10,782.50
each
350
637.45
223,107.50
Supply and wiring of submain with 2X 2.5 sq.mm. FR PVC insulated
1100 V grade multistrand single core copper conductor cable and 1
no 1.5 sqmm copper wire for earth in Heavy guage rigid steel conduit
partly laid in slab and partly concealed in wall
rmt
4000*
153.90
612,000.00
Same as above but for 2 X 1.5 sqmm copper wire and 1 No 1.5
sqmm copper earth wire
Same as above but for 2X 4.0 sqmm copper wire and 1 No 2.5
sqmm copper earth wire
rmt
2500.00
133.00
332,500.00
rmt
4000.00
181.45
725,800.00
8
9
289
10
11
289 A
12
289 D
13
289 G
14
289 F
15
289 I
16
1149
Same as above but for 2X 6.0 sqmm copper wire and 1 No 4.0
sqmm copper earth wire
Same as above but for 2X 10.0 sqmm copper wire and 1 No 6.0
sqmm copper earth wire
Same as above but for 4X 6.0 sqmm copper wire and 2 No 4.0
sqmm copper earth wire
Same as above but for 4X 10.0 sqmm copper wire and 2 No 6.0
sqmm copper earth wire
S/fixing of Hexagonal fan box 16 SWG, including phenolic fan sheet.
rmt
4000.00
202.35
809,400.00
rmt
3000.00
321.10
963,300.00
rmt
4000.00
323.95
1,295,800.00
rmt
2000.00
560.50
1,121,000.00
each
400
101.65
40,660.00
17
S/fixing of MS loose wire box 200 X 250 X 75 mm deep made from
16 SWG MS sheet complete with 3 mm thick phenolic sheet cover.
each
50
190.00
9,500.00
18
S/fixing of MS loose wire box 250 x 300 X 75 mm deep made from
16 SWG MS sheet complete with 3 mm thick phenolic sheet cover.
each
50
285.00
14,250.00
19
S/fixing of MS loose wire box 300 X 450 X 75 mm deep made from
16 SWG MS sheet complete with 3 mm thick phenolic sheet cover.
each
50
380.00
19,000.00
20
424
(I)
Supply and fixing of factory wired, recess mounting cat II mirror optic
fittings with electronic ballast Clean Room luminarie front opening
suitable for PLL-36 W X 3 No. with CFL lamps complete in all
respect. CAT AA (cat no FBS650 3X PL-L36 WEB ( with electronic
ballast) PFOPGT Phillips make or equivalent)
each
40
9,130.00
365,200.00
21
425 (II)
Supply and fixing of factory wired, recess/ surface type mounting
mirror optic fittings for 2 x 36 W CFL lamps with electronic ballast &
bright anodized aluminium reflector & P5 paralite louvers with 2 x 36
W CFL lamps complete in all respect. (Cat No FBS 300 2XPL-L36W
P5WEBT Phillips make or equivalent)
each
175
5,070.00
887,250.00
Supply and fixing of factory wired, recess/ surface type mounting
mirror optic fittings for 3 x 36 W CFL lamps with electronic ballast &
bright anodized aluminium reflector & P5 paralite louvers with 3 x 36
W CFL lamps complete in all respect. (Cat No FBS 300 M 2 X PLL36W P5 WEBT Phillips make or equivalent)
each
175
6,025.00
1,054,375.00
22
24
473
(II)
25
453(I)
26
NS
27
448
28
29
405
412
a
30
31
32
33
34
35
36
Supply and fixing of recess mounting CFL down light specially
designed for SATIN FINISH aluminium reflector, Electronic ballast
suitable for & with 2X 18 w CFL complete in all respects.(Cat no
FBH1-45M2 XPL-C/4P18WHF240 V phillips make or equivalent)
each
50
2,575.00
128,750.00
Supply and fixing of factory wired HPF box type fluorescent tube light
fitting with electronic ballast suitable for 1X40 w fluorescent tube
complete including tubes etc. on surface complete in all
respects.CAT AA
(Cat No- TMC 501 1XTL-D-36 WEB Philips make or equivalent)
Supply and fixing of factory wired HPF box type decorative mirror
light fitting suitable fir 1X18 fluorescent tube complete including
tubes etc. on surface complete in all respects.
Supply and fixing of industrial bulk head fitting with polycarbonate
base guard, prismatic reflector silicon gasket suitable for and with
1X18 w CFL complete in all respect. ( CAT - AA)
each
250
1,025.00
256,250.00
each
30
995.00
29,850.00
each
25
675.00
16,875.00
each
150
152.00
22,800.00
each
each
100
10
567.15
5,481.50
56,715.00
54,815.00
each
32
2,498.00
79,936.00
each
6
1,254.00
7,524.00
each
each
each
32
6
500
1,819.00
921.50
190.00
-
58,208.00
5,529.00
95,000.00
S/F of angle Batten holder complete with 15 W direct fit CFL
Supply & fixing of single light, wall bracket on matching M.D.F.E.G.
board base etc. complete in all respects.
Cat A
486 (I) Supply and fixing of factory wired sodium vapour lamp street light
luminaries single piece cast “Aluminium” body suitable for 250 w
S.V. lamp including integral control gear, 150w S.V. lamp on G.I.
pipe bracket complete in all respects on wall with 1.5 mtr long 40 mm
dia GI bracket and clamps.(Cat no SGP 438 1 X SONT250W Phillips
make or equivalent)
1026 C
S/F of surface/flush mounting 4 ways TPN distribution board without
MCB with additional metal door complete in all respect and as
directed at site.
1024 (C ) S /F surface /flush mounting 8 ways SPN distribution board without
MCB double door complete in all respect and directed as directed at
site
1021 a
S/F of 63 AMP. FP MCB ( 10KA)
1011 (A) S/F of 63 AMP. DP MCB ( 10KA)
1002(A)
S/F & 5Amp./6/… 32Amp. MCB 9 K.A. / 10 K.A.
313
S/F of 63 Amp 415 V metal clad T.P. rewireable type switch fuse unit
on angle iron bracket complete in all respects.
Cat. B
S/F of MCB blanking plate for DB
S /F sheet steel enclosure surface /flush mounting fitted with 20
Amp. 2 pin and earth metal clad scraping earth plug and socket
complete in all respect.
Supply and fixing of call bell of approved make on polished MDFEG /
Teak wood board including making connection etc. complete in all
respects.
Supply and fixing of 16 ways bell indicator on PMDFEG / Teak wood
board including making connection etc. complete in all respects.
each
each
each
4
40
50
3,116.00
11.40
600.40
12,464.00
456.00
30,020.00
each
60
99.75
5,985.00
each
10
3,325.00
33,250.00
Supply and burying of 600mmX600mmX6.0mm G.I. plate vertically
for earthing with its top at least 3 meters below ground level
complete with 20mm dia G.I. pipe ("B" class) and funnel for watering
and 30cm square C.I. frame with hinged cover masonary housing
alternate layers of charcoal / coke and salt at least 150mm thick all
round etc. as per direction of Engineer-in-charge complete in all
respects
Same as above but with copper plate of size 600 X 600 X 3mm
Same as above but for lightening conductor with GI plate size 900 X
900 X 6mm
Supply and laying of 32mmX6mm G.I. strip from earth electrode
directly in the ground as required complete in all respects.
same as above but copper strip of size 32mm X 6 mm
Supply and fixng of vertical down conductor 32 X 6mm GI strip on
approved clamps on surface for lightening conductor for upto 4
storeyed building
Supply and fixing of vertical air termination final rod comprising of
300mm long X25mm dia. Copper rod with one pointed prong and
100mm dia X3mm thick base plate etc. complete in all respects.
set
10
3,852.25
38,522.50
set
each
8
4
7,600.00
5,434.00
60,800.00
21,736.00
rmt
1000
114.95
114,950.00
rmt
rmt
350
300
788.50
201.40
275,975.00
60,420.00
each
4
1,045.00
4,180.00
37
38
1034B
1031
39
1101
40
1108
41
703
42
43
705
707
44
717
45
46
704
713 a
47
712
48
719
Making of joints in GI strip i/c fixing with GI nut & bolt and soldering
each
200
41.80
8,360.00
49
720
each
100
145.35
14,535.00
50
NS
each
400
1,500.00
600,000.00
51
NS
Making of joints in copper strip i/c fixing with GI nut & bolt and
soldering
Supply and fixng of 1200 mm sweep Ceiling fan ISI marked
complete with fan down rod of required size
S/F of fan step regulator modular type (2/3 module)
each
400
427.50
171,000.00
52
NS
53
Supply and fixing of 300 mm sweep 900 RPM exhaust fan heavy
duty with the help of MS fasteners, including making connections,
making of hole in wall fixing of MS drum & MS louvers of required
size
Supply and fixing of 450 mm weep 900 RPM exhaust fan heavy duty
with the help of fasteners, including making connections, making of
hole in wall fixing of MS drum & MS louvers of required size.
each
30
3,170.00
95,100.00
each
20
5,090.00
101,800.00
54
1134
S/F of sock treatment chart (Prescribed under IE rules ) duly framed
with glass & supported from back with hard board or soft board with
supply of all material labour T& P for proper completion of work.
each
10
193.80
1,938.00
55
1109
each
10
42.75
427.50
56
1136
each
10
2,098.55
20,985.50
57
505
each
100
275.50
27,550.00
58
59
NS
1109
each
each
200
10
166.25
55.10
33,250.00
551.00
60
1123
Supply and fixing of danger board fabricated from 10 gauge M.S.
sheet as per I.E. rules
Supply and layfing of 1800mmX900mmX12mm thick chequered
rubber matting of tested quality.
Supply and fixing of cable route marker in suitable masonry
enclosure as directed by the Engineer – in charge.
S/fixing of 15 watt C.F.L.
Supply and fixing of danger board fabricated from 10 gauge M.S.
sheet as per I.E. rules
Supply and fixing of fan hook fabricated M.S. rod for ceiling fan each.
each
10
78.85
788.50
61
1129
Supply and fixing of crimping , solder less , copper tin electroplated
lugs of Dowel’s / ismail make suitable for 10 sq.mm cables ,
including tapping with insulating tape , complete in all respects.
each
400
10.45
4,180.00
62
504 C
each
60
15.20
912.00
63
1139A
Supply and fixing of crimping , solder less , copper tin electroplated
lugs of Dowel’s / ismail make suitable for 1.5 sq.mm to 6 sq.mm
cables , including tapping with insulating tape , complete in all
respects.
Supply and fixing of power plug with 15A/240 V flush type modular
switch and 6 pin 20A/10A 250 V flush type universal modular socket
complete with GI box modular tyepe inluding supply of all material,
labour T&P etc. required for proper completion of work
each
350
500.00
175,000.00
64
65
1020A
Supply and fixing of metra plug & Socket 32A TP
S/F of 40 AMP. 4 pole MCB ( 10KA)
each
each
10
4
2,770.00
1,819.25
27,700.00
7,277.00
66
NS
67
NS
68
NS
69
NS
70
71
NS
72
a
b
c
73
a
b
c
74
NS
NS
NS
NS
NS
NS
NS
NS
NS
75
76
77
78
NS
NS
NS
NS
79
NS
80
NS
81
82
83
84
NS
NS
NS
NS
S/making of chamber for cable etc. of size 30x30x75 cm including all
material & labour.
S/making of chamber for cable etc. of size 45x45x75 cm including all
material & labour.
S/making of cable trench for cable etc. including all material &
labour. SizeS/laying of G.I pipe with required socket underground at the depth of
750 mm below complete in all respect.
100 mm dia
S/laying of P.V.C pipe with required socket underground at the depth
of 750 mm below complete in all respect.
100 mm dia
S/Laying of flexible PVC conduit
20 mm dia
25 mm dia
32 mm dia
S/Fixing of P.V.C gland in flexible pipe.
20 mm dia
25 mm dia
32 mm dia
S/F of Slloted angle 40x40x3mm with hanger,fastener GI nut bolt &
saddile.
Supply and fixing of Computer Jack for Cat - 6 Modular type.
Supply and fixing of TV Jack Modular type.
Supply and fixing of Telephone Jack Modular type.
Supply and drawing of 2 pair telephone wire in PVC conduit heavy
guage.
Supply and drawing of computer networking wire CAT - 6 wire in
PVC conduit heavy guage
Supply and drawing of Television wire RG 6 in heavy guage PVC
conduit.
S/fixing modular blanking plate .
S/Laying of fine sand in cable Trench.
S/fixing of trench cover complete.
Supply and fixing of 4 way VTPN Distribution board double door with
125 Amp. 3 Pole MCCB at incomming
each
4
712.50
2,850.00
each
4
807.50
3,230.00
rmt
10
2,945.00
29,450.00
rmt
200
950.00
-
190,000.00
rmt
200
59,000.00
rmt
rmt
rmt
300
600
200
295.00
12.35
16.15
21.38
each
each
each
rmt
12
20
20
120
11.40
13.30
15.68
190.00
136.80
266.00
313.50
22,800.00
each
each
each
rmt
5
5
5
500
1,102.00
94.05
272.65
76.00
5,510.00
470.25
1,363.25
38,000.00
rmt
5
85.50
427.50
rmt
50
85.50
4,275.00
each
cq. Mtr
sqmtr
each
100
10
10
4
24.70
760.00
3,705.00
20,482.00
2,470.00
7,600.00
37,050.00
81,928.00
3,705.00
9,690.00
4,275.00
85
281
86
87
88
282
283
281(A)
89
282(A)
90
283(A)
91
a
b
c
d
e
f
g
92
a
b
c
NS
NS
NS
NS
NS
NS
NS
Supply and laying of 20mm dia heavy 16 SWG (1.5mm thick) rigid
steel conduit ISI marked complete with bends,deep J/B,binding wire
chuck nut and cotton waste In wall/slab before concerting etc.
complete in all respects.
Same as above but 25 mm dia rigid steel conduit
Same as above but 32 mm dia rigid steel conduit
same as above but heavy duty (2mm thick) PVC conduit of 20mm
dia.
same as above but heavy duty (2mm thick) PVC conduit of 25mm
dia.
same as above but heavy duty (2mm thick) PVC conduit of 32mm
dia.
S/fixing modular switch boxes of following sizes complete with
modular plate i/c cutting of wall and making good after fixing of box
with the help of cement coarse sand mix.
2 Module
3 module
4 module
6 module
8 module
12 module
18 module
Supply and laying of XLPE insulated armoured seved sheathed
Aluminiumconductor cables 1100 V grade at a depth of 750 mm
below ground level over a cushion of 75 mm thick sand all around
and protected with burnt bricks on sides and on top. On surface the
cable run shall be fixed on MS clamps & M.S.slotted angle tray etc of
suitable size or as directed by engineer in charge, the armouring of
the cable shall be properly connected with the earth conductor by
clamps. of following sizes
35 sqmm X 3.5 C
70 sqmm X 3.5 C
120 sqmm X 3.5 C
rmt
300
84.55
25,365.00
rmt
rmt
rmt
1000
500
500
96.90
136.80
38.00
96,900.00
68,400.00
19,000.00
rmt
350
45.60
15,960.00
rmt
200
57.95
11,590.00
each
-
each
each
each
each
each
each
each
50
100
100
50
50
100
50
rmt
rmt
rmt
300
250
250
50.00
70.00
85.00
115.00
150.00
180.00
210.00
2,500.00
7,000.00
8,500.00
5,750.00
7,500.00
18,000.00
10,500.00
350.00 105,000.00
790.00 197,500.00
920.00 230,000.00
93
94
Supply Installation testing & commissioning of Floor L.T. Control
Panel, indoor cubical type, dust & vermine proof, floor mounting, free
standing, dead front construction, made of 16 SWG CRCA sheet
steel, duly Powder Coated having separate instrument chamber
comprising of flush type voltmeter, amperemeter, selector switches
CTs, indicating lights, toggle switch, protection fuses on incoming &
all outgoing of 100 A, & above shall have amperemeter, selector
switches & CTs, suitable rating PVC sleeved aluminium bus bars
and complete with the following switchgears, including connections &
interconnections etc.
Incomming : 250 A FP MCCB - 1 No
Bus bar : 300 A TPN AL bus
Out going : 125 A TPN MCCB - 1 no
63 A FP MCB - 4 no
Supply Installation testing & commissioning of Floor Emergency
L.T. Control Panel, indoor cubical type, dust & vermine proof, floor
mounting, free standing, dead front construction, made of 16 SWG
CRCA sheet steel, duly Powder Coated having separate instrument
chamber comprising of flush type voltmeter, amperemeter, selector
switches CTs, indicating lights, toggle switch, protection fuses on
incoming & all outgoing of 100 A, & above shall have amperemeter,
selector switches & CTs, suitable rating PVC sleeved aluminium bus
bars and complete with the following switchgears, including
connections & interconnections etc.
each
6
115,000.00 690,000.00
each
6
85,000.00 510,000.00
Incomming : 125 A FP MCCB - 1 No
Bus bar : 160A TPN AL bus
Out going :
63 A FP MCB - 4 no
Total
14,863,575.00
Bill of Quantity
Name of work:-Construction of Centre for Excellence at King George Medical University, Lucknow.
FIRE EXTINGUISHER
S.N.
Description
Qty
Unit
1
ABC store pressure (Multipurpose) type Fire Extinguisher
Capacity 04 kg fully charged & complete with wall
mounting bracket and discharge hose pipe and pressure
gauge IS: 15683 ISI marked.
10
Nos.
Unit Rate
(In Rs.)
4,873.50
Amount
(In Rs.)
2
CO2 type Fire Extinguisher Capacity 4.5 kg fully charged
complete with wall mounting bracket and discharge Hose
pipe and Horn IS: 15683, ISI Marked.
10
Nos.
8,436.00
84,360.00
3
4
G.I. Fire Bucket capacity 9 liters
Fire bucket stand for hanging Four bucket.
4
1
Nos.
Nos.
171
1710
684.00
1,710.00
Total
135,489.00
48,735.00
Bill of Quantity
Name of work:-Construction of Centre for Excellence at King George Medical University, Lucknow.
FIRE ALARM SYSTEM
Unit Rate
(In Rs.)
Amount
(In Rs.)
S.N.
Description
Qty
Unit
1
Supply installation testing commissioning and handing over of 8 – Zone Main Control
Panel with Public Addressable System (P.A. System) with all facility like Open &
Short circuit fire and fault indication & 120 watt Amplifirer for P.A. System etc.
complete with Battery Charger & All other Accessories strictly as per IS: 2189.
1
No.
72,500.00
72,500.00
2
Supply installation testing commissioning and handing over of 4 –Zone Local Control
Panel with all facility like Open & Short circuit fire and fault condition & All other
Accessories strictly as per IS: 2189.
8
No.
27,500.00
220,000.00
3
Supply installation testing commissioning and handing over of Ionization Smoke
Detector complete with base & all other accessories
280
No.
2,275.00
637,000.00
4
Supply installation testing commissioning and handing over of ROR type Heat
Detector fixed temperature complete with base & all accessories.
25
No.
1,655.00
41,375.00
5
Supply installation testing commissioning and handing over of Response Indicator
(R.I.) as per IS: 2189.
Supply installation testing commissioning and handing over of Manual Call Point
Break Glass in metallic box with Hammer as per IS: 2189
Supply installation testing commissioning and handing over of Electronic Alarm
Sounder as per IS: 2189.
Supply installation testing commissioning and handing over of Maintenance free
battery. (2Nos X 12 Volt X 42AH)
Supply, wiring, connection and testing of sizes 1100 volt grade PVC insulated copper
conductor Wire in conduit concealed in wall, Slab, ceiling/ false ceiling complete with
all accessories as per standard specification.
75
No.
251.00
18,825.00
10
No.
700.00
7,000.00
10
No.
775.00
7,750.00
1
Set
16,500.00
16,500.00
5000
2000
Mtrs
Mtrs
45.00
65.00
225,000.00
130,000.00
6
7
8
9
Make of Wire: Havell/Rallison or equivalent
(2Core X 1.5sq.mm.)
(3Core X 1.5sq.mm.)
Total Amount Rs.
1,375,950.00
Bill of Quantity
Name of work:-Construction of Centre for Excellence at King George Medical University, Lucknow.
FIRE FIGHTING SYSTEM
S.N.
1
2
3
4
Particulars
S.I.T.C. of ISI Marked C-Class (Heavy Duty) M.S. Pipe For UNDER
GROUND Use including transportation, Bend, Flanges, Reducer, Tees, Anti
Corrosive Treatment and Laying down the pipe in trenches and back filling of
trenches compacting etc. hydrostatic testing of the complete pipe work
completing the work in all respect. (Rates of RCC cutting / CC Cutting are not
included in quoted rate
Make: TATA, JINDAL.
·
150 mm
·
100 mm
·
80 mm
S.I.T.C. of ISI Marked C-Class (Heavy Duty) M.S. Pipe For ABOVE
GROUND Use including transportation, Bend, Flanges, Reducer, Tees, Angle,
Fastener, and painting the pipe with Primer and Fire Red Paint complete the work
in all respect.
Make: TATA, JINDAL.
·
150 mm
·
100 mm
·
80 mm
·
65 mm
S.I.T.C. of Cast Iron Butterfly Valves ISI marked including transporting the
material to work site, supply and fixing nuts, bolts, gaskets and washers etc.,
completing the work in all respect.
Make: Kalpana/Kartar/ Advance.
·
150 mm
·
100 mm
·
80 mm
S.I.T.C. of Cast Iron dual plate check Valves as per IS: 210 including
transportation, nuts, bolts, gaskets and washers etc., completing the work in all
respect.
Make: Kalpana/Kartar/ Advance.
QTY
Unit
Rate
Amount
100
40
30
Meter
Meter
Meter
2,150.00
1,475.00
1,000.00
215,000.00
59,000.00
30,000.00
75
75
60
60
Meter
Meter
Meter
Meter
2,000.00
1,400.00
950.00
850.00
150,000.00
105,000.00
57,000.00
51,000.00
8
2
10
No.
No.
No.
9,200.00
8,200.00
4,700.00
73,600.00
16,400.00
47,000.00
5
6
7
8
9
10
·
150 mm
·
100 mm
·
80 mm
Supply, Installation, Testing and Commissioning of single headed 63mm dia
Stainless Steel Landing Valve (Hydrant Valve), flanged inlet with 63 mm female
instantaneous outlet conforming to IS: 5290 on the fire wet riser including
making 80 mm pipe connection with riser and landing valves in proper positions,
including supply of nuts, gaskets, caps, chains etc., testing the hydrant,
completing the work in all respect
Make: Getech/Newage/S.B.
Supply, Installation, Testing and Commissioning of 63mm dia instantaneous
pattern Stainless Steel short branch pipe and 20 mm dia nozzle conforming to IS:
903-1985 ISI Marked.
Make: Getech/Newage/S.B.
Supply, Installation, Testing and Commissioning of 63 mm dia 15 Meters long,
Reinforced Rubber Lined, (RRL) IS: 636, Type – A, ISI marked Hose Pipe
binding with 63 mm dia Stainless Steel male and female coupling conforming to
as per
IS: 903.
Make: New Age/Padmini.
Supply, Installation, Testing and Commissioning of 20 mm bore and 30 meters
long high pressure rubber lined pipe and hose reel for first aid fire fighting
conforming to IS: 884, ISI Marked with full swing drum, fixing brackets, 25 mm
globe valve connection to the landing valve through adopter or directly from the
riser through 25 mm dia GI pipe as required including 25 mm dia pipe length, all
sockets, elbows, nipples etc. including providing operating instructions and
fixing it near hose reel
Make: Getech / New age/ Firejeet / S.B.
S.I.T.C. of Weather Proof Door Hose Cabinet INDOOR TYPE keeping for
Hose Reel Drum, Hydrant, Branch Pipe, Hose Pipe having central opening glass
door (4 mm thick reinforced glass) including necessary locking arrangement
(Size 1300mm X 900mm X 500mm) or As per Fire Duct / Specification.
4
1
2
8
No.
No.
No.
No.
8,200.00
7,200.00
4,400.00
10,950.00
32,800.00
7,200.00
8,800.00
87,600.00
8
No.
2,285.00
18,280.00
8
No.
7,785.00
62,280.00
8
No.
13,100.00
104,800.00
8
No.
16,500.00
132,000.00
S.I.T.C. of Weather Proof Hose Cabinet Out Door TYPE keeping for Hydrant,
Branch Pipe, Hose Pipe having central opening glass door (4 mm thick
reinforced glass) including necessary locking arrangement (Size 1000mm X
750mm X 500mm) or As per Specification provided.
4
No.
16,500.00
66,000.00
11
12
13
14
S.I.T.C. of Cylindrical type air cushion tank 150mm dia 1.0 meter long on the top
of wet riser and with the pump shall be provided with an automatic air release
valve, safety valve, Pressure gauge etc. complete as drawings & direction of the
Engineer –in- in charge complete the work in all respect.
Supply, Installation, Testing and Commissioning of
instantaneous Inlet /
Draw off connection for Fire Brigade connection including provision for
Butterfly Valve and making connection with wet riser pipe or underground water
tank etc. competing the work in all respect. (Rates of Butterfly Valve are not
included, quoted as separate item)
Make: Getech/Newage/S.B.
Fire Brigade Connection (Inlet/Drawoff) - 4 Way.
Supply, Installation, Testing and Commissioning of electric driven Automatic
Pressurization (JOCKEY) Fire Pump set consisting of the following for the
hydrant.
Kirloskar make clear water pump end suction type with CI Body, Brass Impeller
& Steel Shaft capable of discharging 180 Liters Per Minute, single stage with 60
Meter Head at 2900 RPM.
Squirrel cage induction motor suitable for 415 volts, 3 phase 50HZ, AC supply
and 10 HP capacity for the above pump with synchronous speed of 2900 RPM
TEFC type conforming to IP 55 protection and flexible coupling, coupling guard
with the pump as per specification.
Common bedplate, fabricated out of mild steel channel or cast iron type as
required.
Suitable cement concrete pumps foundation with cushy foot mountings etc. as
required.
Make: Kirloskar / Greaves.
Supply, Installation, Testing and Commissioning of electric driven MAIN FIRE
MOTOR & PUMP suitable for automatic operation consisting of the following
for the hydrant.
Kirloskar make clear water pump end suction type with CI Body, Brass Impeller
& Steel Shaft capable of discharging 2280 Liters per Minute, single stage with 60
Meter Head at 2900 RPM.
Squirrel cage induction motor 50 HP capacity for the above pump with
synchronous speed of 2900 RPM TEFC type conforming to IP 55 protection and
flexible coupling, coupling guard with the pump as per specification.
Common bedplate, fabricated out of mild steel channel or cast iron type as
required.
2
No.
11,000.00
22,000.00
1
1
No.
No.
20,900.00
146,000.00
20,900.00
146,000.00
1
No.
425,000.00
425,000.00
15
Suitable cement concrete pumps foundation with cushy foot mountings etc. as
required.
Make: Kirloskar / Cromptom Make motor and pump.
Supply , Installation, Testing and Commissioning of DISEL ENGINE DRIVEN
FIRE PUMP suitable for automatic operation consisting of the following.
1
No.
670,000.00
670,000.00
1
No.
225,000.00
225,000.00
35
50
Meters
Meters
332.00
825.00
11,620.00
41,250.00
Kirloskar/Greaves make clear water pump end suction type with CI Body, Brass
Impeller, Steel Shaft capable of discharging 2280 Liters Per Minute, single stage
with 60 Meter Head so as to ensure a minimum pressure of 3.5kgs/cm2 at highest
and farthest outlet at specified flow complete with necessary strainer on suction
side pressure gauge on the delivery side including by pass arrangement for
periodic testing of the working of pump set etc. as required.
16
17
Water cooled cold starting type diesel engine, developing 60 BHP at suitable
RPM for the above pump set including automatic starting mechanism, Batteries,
Flexible, coupling, coupling guard with the pump, common bed plate for the
mounting of diesel engine and pump fabricated out of M.S. Channel type
including suitable cement concrete pump foundation complete with cushy foot
mounting etc as required
Supply, Installation, Testing and Commissioning of cubical type floor/wall
mounted, dust & vermin proof, fabricated with 16 swg C.R.C.A. sheet steel, TPN
bus bar 415V AC, 50HZ, compartmentalized, powder coated control panel for
automatic /manual operation of 1 No. of Main Motor, O1 No of Jockey Motor
& 01 No. of Diesel Engine with suitable switchgear, relays control and other
components such as Voltmeter, Amp. Meter , starter for electrical motor, single
phasing presenters and power control cable work, battery charger interconnection
within the panel and along with components and motors complete in all respects.
Supply, Installation, Testing and Commissioning of aluminum conductor PVC
insulated Armoured, served sheathed cable 1100 V grade with terminal joints
and brass compression glands on surface, the cable run shall be fixed on M.S.
Clamps etc of suitable size or as directed by engineers In charge complete in all
respects. The armoring of the cable shall be properly connected with the earth
conductor by clamps etc (cable shall be ISI Marked as per IS: 1554)
Make: Rallison, Polycab, Gloster, National.
·
25 sq mm 3.5 core
·
70 sq mm 3.5 core
19
Supply, Installation, Testing and Commissioning of Pressure Switch complete
with all accessories. Washers etc., completing the work in all respect.
3
Nos.
2,950.00
8,850.00
20
Supply, Installation, Testing and Commissioning of Pressure Gauge complete
with Socket & Nipple and all accessories.
Making of Butterfly Valve / Sluice Vavle chamber.
Sizes(1000mm X
750mm X 750mm)
S.I.T.C. of Priming System for Fire Fighting Motor Pumpset System including
supply of 200liters PVC Water Tank, G.I. Pipe, Ball Valve & other Accessories.
4
Nos.
600.00
2,400.00
3
Nos.
11,000.00
33,000.00
1
Job
8,000.00
8,000.00
2
1
2
1
Nos.
No.
No
No
9,000.00
6,500.00
23,500.00
46,500.00
18,000.00
6,500.00
47,000.00
46,500.00
21
22
23
Supply, Installation, Testing and Commissioning of Vibration Isolator for
Outlet of Pump pipe, completing the work in all respect.
·
150 mm dia
·
80 mm dia
200mm dia
Make: HD, Getech
Make: System Sensor HD, Equivalent.
Make: Firejeet, ECD.
Grand Total Rs.
3,055,780.00