Issue Date:
2010-07-21
Page 1 of 17
Report Reference #
E186249-A133-UL
2012-01-09
UL TEST REPORT AND PROCEDURE
Standard:
Certification Type:
CCN:
Product:
Model:
Rating:
UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology
Equipment - Safety - Part 1: General Requirements)
CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information
Technology Equipment - Safety - Part 1: General Requirements)
Component Recognition
QQGQ2, QQGQ8 (Power Supplies for Information Technology
Equipment Including Electrical Business Equipment)
Switching Power Supply
DS1050-3, DS1050-3-001-FF
AC input:
100-240V, 14.5A Max, 50/60Hz
For Model DS1050-3:
DC outputs:
+12.0V, 87.0A Max
+3.3Vsb, 3.0A Max / +5.0Vsb, 2.0 A Max
1050 Watts
For Model DS1050-3-001-FF:
DC outputs:
+12.0V, 82.0A Max
+3.3Vsb, 6.0A Max
1000 Watts
Applicant Name and Address:
ASTEC INTERNATIONAL LIMITED - PHILIPPINE BRANCH
3RD AND 4TH FLOOR TECHNO PLAZA ONE BUILDING,
#18 ORCHARD ROAD, EASTWOOD CITY CYBERPARK
BAGUMBAYAN, QUEZON CITY
1110 PHILIPPINES
This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the
above referenced Standards. The products have been found to comply with the requirements covering the category and the products are
judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on
such products which comply with this Test Report and any other applicable requirements of UL LLC ('UL') in accordance with the FollowUp Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up
Service under the indicated Test Procedure.
The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety.
Copyright © 2012
Issue Date:
2010-07-21
Page 2 of 17
Report Reference #
E186249-A133-UL
2012-01-09
UL authorizes the applicant to reproduce the latest pages of the referenced Test Report consisting of the first page of the Specific
Technical Criteria through to the end of the Conditions of Acceptability.
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL.
Prepared by:
Suki Kwong
Reviewed by: Ernest Cheung
Copyright © 2012
Issue Date:
2010-07-21
Page 3 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Supporting Documentation
The following documents located at the beginning of this Procedure supplement the requirements of this Test
Report:
A. Authorization - The Authorization page may include additional Factory Identification Code markings.
B. Generic Inspection Instructions i. Part AC details important information which may be applicable to products covered by this Procedure.
Products described in this Test Report must comply with any applicable items listed unless otherwise
stated in the body of this Test Report.
ii. Part AE details any requirements which may be applicable to all products covered by this Procedure.
Products described in this Test Report must comply with any applicable items listed unless otherwise
stated in the body of each Test Report.
iii. Part AF details the requirements for the UL Certification Mark which is not controlled by the technical
standard used to investigate these products. Products are permitted to bear only the Certification
Mark(s) corresponding to the countries for which it is certified, as indicated in each Test Report.
Product Description
The equipment is a switching power supply, intended for building in as a component used in information
technology equipment which employs isolating transformers. Reinforced insulation is provided between
primary and secondary. Basic insulation is provided between primary and PE (Protective Earth).
Model Differences
Model DS1050-3-001-FF is identical to Model DS1050-3 except for model designation, output rating, the
airflow with only one direction (handle to output connector with fan filter), the EMI circuitry layout of
Mainboard, additional Surge PWB assembly and output power derating features.
Technical Considerations
Equipment mobility : for building-in
Connection to the mains : pluggable A
Operating condition : continuous
Access location : To be considered in end system
Over voltage category (OVC) : OVC II
Mains supply tolerance (%) or absolute mains supply values : +10%, -10%
Tested for IT power systems : No
IT testing, phase-phase voltage (V) : --
Class of equipment : Class I (earthed)
Issue Date:
2010-07-21
Page 4 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Considered current rating (A) : See cover page
Pollution degree (PD) : PD 2
IP protection class : IP X0
Altitude of operation (m) : < 3963 m
Altitude of test laboratory (m) : < 500 m
Mass of equipment (kg) : <18
The product was submitted and evaluated for use at the maximum ambient temperature (Tma)
permitted by the manufacturer’s specification of: below. For Model DS1050-3, 50 °C at full load and
70 °C at half load conditions for forward fan airflow (Output to handle airflow); 25 °C at full load and
up to 61 °C at derating load conditions for reverse fan airflow (handle to output airflow) conditions.
For Model DS1050-3-001-FF, 25 °C at 1000W (full load) and 55 °C at 700 W; Output power derates
10W per °C from 26°C to 50°C ambient; and Output power derates 15W per °C from 51°C to 70°C
ambient,
The means of connection to the mains supply is: Pluggable A
The product is intended for use on the following power systems: TN
The equipment disconnect device is considered to be: Appliance inlet
The class of laser product is: Class 1 (I) for indication only
The following are available from the Applicant upon request: Installation (Safety) Instructions /
Manual
The creepage and clearance distances have additionally been assessed for suitability up to 3963 m
(13000 ft).
The equipment is a component level power supply intended for use in Class I applications
For Model DS1050-3, the equipment was additionally evaluated at the following conditions: Reverse
Airflow (Handle to Output fan airflow) at 25 degC 1050W(full load), 50 degC 900W, 55degC 825W
and 61 degC 525W (half load); Reverse airflow with fan filter at 25 degC 1000W, 50 degC 750W, 55
degC 700W and 61 deg C 500W load.
For Model DS1050-3-001-FF, the equipment was additionally evaluated at the following conditions:
Reverse Airflow (Handle to Output fan airflow with fan filter) at 25 degC 1000W(full load), 40 degC
850W (85% load), 50degC 750W (75% load), 55 degC 700W (70% load), 60 degC 600W (60% load)
Issue Date:
2010-07-21
Page 5 of 17
Report Reference #
E186249-A133-UL
2012-01-09
and 70 degC 450W (45% load).
Engineering Conditions of Acceptability
For use only in or with complete equipment where the acceptability of the combination is determined by UL
LLC. When installed in an end-product, consideration must be given to the following:
The following Production-Line tests are conducted for this product: Earthing Continuity, Electric
Strength,
The end-product Electric Strength Test is to be based upon a maximum working voltage of: PrimarySELV: 374.7 Vrms, 716 Vpk, Primary-Earthed Dead Metal: 374.2 Vrms, 716 Vpk
The following secondary output circuits are SELV: +12V, +3.3Vsb/+5.0Vsb
The following secondary output circuits are at hazardous energy levels: +12V
The following secondary output circuits are at non-hazardous energy levels: +3.3Vsb / 5.0Vsb
The power supply terminals and/or connectors are: Not investigated for field wiring
The maximum investigated branch circuit rating is: 20 A, ,
The investigated Pollution Degree is: 2
Proper bonding to the end-product main protective earthing termination is: Required
An investigation of the protective bonding terminals has: Been conducted
The following magnetic devices (e.g. transformers or inductor) are provided with an OBJY2 insulation
system with the indicated rating greater than Class A (105°C): T1, T2 (Class F)
The following end-product enclosures are required: Mechanical, Fire, Electrical
The equipment is suitable for direct connection to: AC mains supply
The secondary output connector has not been evaluated for field connections.
The power supply has been evaluated for use in Class 1 equipment as defined in UL 60950-1
Second edition and CAN/CSA C22.2 No. 60950-1-07. An additional evaluation shall be made if the
power supply is intended for use in other than Class 1 equipment.
Issue Date:
2010-07-21
Page 6 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Connection to the supply: Pluggable equipment type A with detachable input cord in end system.
The disconnection from the line should be considered in the end system.
The equipment was not evaluated for system mounting. When installed in the end system, proper
evaluation should be considered.
Additional Information
The label is a draft of an artwork for marking plate pending approval by National Certification Bodies and it
shall not be affixed to products prior to such an approval.
Additional requirements:
1. Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to corrosive
or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
2. Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Project 11CA17723 (UL+CB):
1. Revising output rating from DC +3.3Vsb 6.0A / +5.0Vsb 4.0A to DC +3.3Vsb 3.0A / +5.0Vsb 2.0A
2. Revising the Operating Altitude from 10,000 ft to 13,000 ft
3. Correcting the information of Power Transformer (T2)
4. For CB report please refer to E186249-A165-CB
Revision under Project 11CA42679
1. Employing new Model of DS1050-3-001-FF
Issue Date:
2010-07-21
Page 7 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Markings and instructions
Clause Title
Marking or Instruction Details
Power rating - Ratings
Ratings (voltage, frequency/dc, current)
Power rating Company identification
Listee's or Recognized company's name, Trade Name, Trademark or File
Number
Power rating -
Model Number
Model
Fuses - Rating
Rated current and voltage and type located on or adjacent to fuse or
fuseholder.
Special Instructions to UL Representative
N/A
Production-Line Testing Requirements
Electric Strength Test Special Constructions - Refer to Generic Inspection Instructions, Part AC for
further information.
Model
Component
Removable
Parts
Test probe location
V
rms
V dc
Test Time,
s
-
-
-
-
-
-
-
Earthing Continuity Test Exemptions - This test is not required for the following models:
N/A
Electric Strength Test Exemptions - This test is not required for the following models:
N/A
Electric Strength Test Component Exemptions - The following solid-state components may be
disconnected from the remainder of the circuitry during the performance of this test:
N/A
Sample and Test Specifics for Follow-Up Tests at UL
Model
-
Component
-
Material
-
Test
-
Test
Specifics
Sample(s)
-
-
Issue Date:
2010-07-21
Page 8 of 17
Report Reference #
E186249-A133-UL
2012-01-09
TABLE: List of Critical Components
Object/part or
Description
Manufacturer/
trademark
type/model
technical data
CCN
AC Inlet
Fuses
(F800, F801)
Alternate Fuses
(F800, F801)
Alternate Fuses
(F800, F801)
Alternate Fuses
(F800, F801)
Y-Capacitors
(C800, C801)
Alternate Y-Capacitors
(C800, C801)
Alternate Y-Capacitors
(C800, C801)
Alternate Y-Capacitors
(C800, C801)
Alternate Y-Capacitors
(C800, C801)
Alternate - Y-Capacitors
(C800, C801)
Alternate Y-Capacitors
(C800, C801)
Rong Feng
Littelfuse Inc
SS-120
216 series
Rated 250V, 15A, 85°C
Rated 16.0A, 250Vac
AXUT2 (E102641) UL,CSA
JDYX2 (E10480) UL,CSA
Schurter AG
SP 5x20
Rated 16.0A, 250Vac
JDYX2 (E41599)
UL,CSA
Conquer
UBM-A
Rated 16.0A, 250Vac
JDYX2 (E82636)
UL,CSA
Hollyland
50CF
Rated 16.0A, 250Vac
JDYX2 (E156471) UL,CSA
TDK Corp
CS
FOWX2 (E37861) UL,CSA
TDK Corp
CD
Max 1.5nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
Max 1.5nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
TDK Corp
CY
Max 1.5nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2 (E37861) UL,CSA
Murata Mfg Co., Ltd.
KH
Max 1.5nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2 (E37921) UL,CSA
Murata Mfg Co., Ltd.
KX
Max 1.5nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2 (E37921) UL,CSA
Murata Mfg Co., Ltd.
KY
FOWX2 (E37921) UL,CSA
Walsin Technology
Corp.
AC
Max 1.5nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
Max 1.5nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
Marks of
Conformity
FOWX2 (E37861) UL,CSA
FOWX2
(E146544)
UL,CSA
Issue Date:
2010-07-21
Page 9 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Object/part or
Description
Manufacturer/
trademark
type/model
technical data
CCN
Marks of
Conformity
Alternate Y-Capacitors
(C800, C801)
Alternate Y-Capacitors
(C800, C801)
Alternate Y-Capacitors
(C800, C801)
Alternate Y-Capacitors
(C800, C801)
Y-Capacitors
(C12, C804, C805)
Alternate Y-Capacitors
(C12, C804, C805)
Alternate Y-Capacitors
(C12, C804, C805)
Alternate Y-Capacitors
(C12, C804, C805)
Alternate Y-Capacitors
(C12, C804, C805)
Alternate Y-Capacitors
(C12, C804, C805)
Alternate Y-Capacitors
(C12, C804, C805)
Alternate -
Walsin Technology
Corp.
AH
Max 1.5nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2
(E146544)
UL,CSA
Evox Rifa
PME271Y
Max 1.5nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOKY2
(E100117)
UL,CSA
Evox Rifa
PHE850
Max 1.5nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOKY2
(E100117)
UL,CSA
Iskra
KNB2520
Max 1.5nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2
(E145156)
UL,CSA
TDK Corp
CS
FOWX2 (E37861) UL,CSA
TDK Corp
CD
Max 2.2nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
Max 2.2nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
TDK Corp
CY
Max 2.2nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2 (E37861) UL,CSA
Murata Mfg Co., Ltd.
KH
Max 2.2nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2 (E37921) UL,CSA
Murata Mfg Co., Ltd.
KX
Max 2.2nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2 (E37921) UL,CSA
Murata Mfg Co., Ltd.
KY
Max 2.2nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2 (E37921) UL,CSA
Walsin Technology
Corp.
AC
Max 2.2nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2
(E146544)
UL,CSA
Walsin Technology
AH
Max 2.2nF, Min 250Vac, min. 105 °C, marked with
FOWX2
UL,CSA
FOWX2 (E37861) UL,CSA
Issue Date:
2010-07-21
Page 10 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Object/part or
Description
Manufacturer/
trademark
Y-Capacitors
(C12, C804, C805)
Alternate Y-Capacitors
(C12, C804, C805)
Alternate Y-Capacitors
(C12, C804, C805)
Alternate Y-Capacitors
(C12, C804, C805)
Y-Capacitors
(C70, C80)
Alternate Y-Capacitors
(C70, C80)
Alternate Y-Capacitors
(C70, C80)
Alternate Y-Capacitors
(C70, C80)
Alternate Y-Capacitors
(C70, C80)
Alternate Y-Capacitors
(C70, C80)
Alternate Y-Capacitors
(C70, C80)
Alternate Y-Capacitors
Corp.
type/model
technical data
CCN
Y1 or Y2 per IEC 60384-14-14.
(E146544)
Marks of
Conformity
Evox Rifa
PME271Y
Max 2.2nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOKY2
(E100117)
UL,CSA
Evox Rifa
PHE850
Max 2.2nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOKY2
(E100117)
UL,CSA
Iskra
KNB2520
Max 2.2nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2
(E145156)
UL,CSA
TDK Corp
CS
FOWX2 (E37861) UL,CSA
TDK Corp
CD
Max 4.7nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
Max 4.7nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
TDK Corp
CY
Max 4.7nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2 (E37861) UL,CSA
Murata Mfg Co., Ltd.
KH
Max 4.7nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2 (E37921) UL,CSA
Murata Mfg Co., Ltd.
KX
Max 4.7nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2 (E37921) UL,CSA
Murata Mfg Co., Ltd.
KY
Max 4.7nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2 (E37921) UL,CSA
Walsin Technology
Corp.
AC
Max 4.7nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2
(E146544)
UL,CSA
Walsin Technology
Corp.
AH
Max 4.7nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2
(E146544)
UL,CSA
FOWX2 (E37861) UL,CSA
Issue Date:
2010-07-21
Page 11 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Object/part or
Description
(C70, C80)
Alternate Y-Capacitors
(C70, C80)
Alternate Y-Capacitors
(C70, C80)
Alternate Y-Capacitors
(C70, C80)
X-Capacitors
(C802, C803)
Alternate X-Capacitors
(C802, C803)
Alternate X-Capacitors
(C802, C803)
Alternate X-Capacitors
(C802, C803)
X-Capacitor
(C806)
Alternate X-Capacitor
(C806)
Alternate X-Capacitor
(C806)
Alternate X-Capacitor
(C806)
Varistors for Model
Manufacturer/
trademark
type/model
technical data
CCN
Marks of
Conformity
Evox Rifa
PME271Y
Max 4.7nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOKY2
(E100117)
UL,CSA
Evox Rifa
PHE850
Max 4.7nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOKY2
(E100117)
UL,CSA
Iskra
KNB2520
Max 4.7nF, Min 250Vac, min. 105 °C, marked with
Y1 or Y2 per IEC 60384-14-14.
FOWX2
(E145156)
UL,CSA
Evox Rifa
PHE840M
UL
Hua Jung
Components Co.,
Ltd.
Vishay
MKP
Max 0.68uF, Min 250Vac min. 105 °C, marked with FOKY2
X1 or X2 per IEC 60384-14-14.
(E100117)
Max 0.68uF, Min 250Vac min. 105 °C, marked with FOKY2
X1 or X2 per IEC 60384-14-14.
(E221690)
339
Max 0.68uF, Min 250Vac min. 105 °C, marked with FOKY2
X1 or X2 per IEC 60384-14-14.
(E109565)
UL
Xiamen Faratronic
MKP62
Max 0.68uF, Min 250Vac min. 105 °C, marked with FOKY2
X1 or X2 per IEC 60384-14-14.
(E186662)
UL
Evox Rifa
PHE840M
MKP
FOKY2
(E100117)
FOKY2
(E221690)
UL
Hua Jung
Components Co.,
Ltd.
Vishay
Max 1.0uF, Min 250Vac min. 105 °C, marked with
X1 or X2 per IEC 60384-14-14.
Max 1.0uF, Min 250Vac min. 105 °C, marked with
X1 or X2 per IEC 60384-14-14.
339
Max 1.0uF, Min 250Vac min. 105 °C, marked with
X1 or X2 per IEC 60384-14-14.
FOKY2
(E109565)
UL
Xiamen Faratronic
MKP62
Max 1.0uF, Min 250Vac min. 105 °C, marked with
X1 or X2 per IEC 60384-14-14.
FOKY2
(E186662)
UL
Thinking Electronics
TVR14471
Min. 300Vac
VZCA2 (E314979) UL
UL
UL
Issue Date:
2010-07-21
Page 12 of 17
Report Reference #
E186249-A133-UL
2012-01-09
type/model
technical data
CCN
Thinking Electronics
Industrial Co., Ltd.
TVR14511
Min. 300Vac
VZCA2 (E314979) UL
Walsin Technology
SR511K
Min. 300Vac
VZCA2 (E309297) UL
Epcos
S14K300E2
Min. 300Vac
VZCA2 (E321126) UL
Thinking Electronics
Industrial Co., Ltd.
TVR14471
Min. 300Vac
VZCA2 (E314979) UL
Thinking Electronics
Industrial Co., Ltd.
TVR14511
Min. 300Vac
VZCA2 (E314979) UL
Walsin Technology
SR511K
Min. 300Vac
VZCA2 (E309297) UL
Epcos
S14K300E2
Min. 300Vac
VZCA2 (E321126) UL
Object/part or
Description
Manufacturer/
trademark
DS1050-3 only
(VDR800, VDR801)
Alternate Varistors for Model
DS1050-3 only
(VDR800, VDR801)
Alternate Varistors for Model
DS1050-3 only
(VDR800, VDR801)
Alternate Varistors for Model
DS1050-3 only
(VDR800, VDR801)
Varistors for Model
DS1050-3-001-FF only
(VDR800, VDR802,
VDR803)
Alternate Varistors for Model
DS1050-3-001-FF only
(VDR800, VDR802,
VDR803)
Alternate Varistors for Model
DS1050-3-001-FF only
(VDR800, VDR802,
VDR803)
Alternate Varistors for Model
DS1050-3-001-FF only
(VDR800, VDR802,
VDR803)
Industrial Co., Ltd.
Marks of
Conformity
Issue Date:
2010-07-21
Page 13 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Object/part or
Description
Manufacturer/
trademark
type/model
technical data
CCN
Marks of
Conformity
Common Mode Chokes
(L800, L801)
Astec International
Limited / Emerson
Network Power
Various
85266015200
Constructed with (OBMW2), 130 °C
Tested for
compliance
--
Various
Min. 20A, Min. 600V
--
Various
Various
Min 680uF, Min 400V, 105°C
Astec International
Limited / Emerson
Network Power
Astec International
Limited / Emerson
Network Power
Astec International
Limited / Emerson
Network Power
Various
85266023090
Constructed with (OBMW2), 130 °C.
Tested for
compliance
Tested for
compliance
Tested for
compliance
85266023100
Constructed with (OBMW2), 130 °C.
Tested for
compliance
--
85266020390
Constructed with (OBMW2), 130 °C.
Tested for
compliance
--
Various
Min. 19A, Min. 600V
--
Various
Various
Min. 19A, Min. 600V
Tyco Electronics EC
KK
Tyco Electronics EC
KK
Song Chuan
Precision Co., Ltd.
Ningbo Forward
Relay Corp. Ltd.
Various
OJE SS 112 HM2 Rated 10A, 250Vac
Tested for
compliance
Tested for
compliance
NRNT2 (E82292)
UL
OJ SS 112 LMHF Rated 8A, 250Vac
NRNT2 (E82292)
UL
835
NRNT2 (E74321)
UL
JZC-32F
Rated 12A, 125V ac, or 10A, 277 Vac for General
Use
Rated 10A, 125Vac
Various
Min. 16A, Min. 600V
Tested for
compliance
--
85266020380
Constructed with (OBMW2), 90°C
Tested for
compliance
--
Bridge Rectifier
(D12)
Bulk Capacitor
(C43)
PFC Choke (L2)
PFC Choke (L4)
Buck Choke (L3)
PFC FETs
(Q1, Q3, Q4)
BUCK FET
(Q10)
Relay (RLY800)
Alternate Relay (RLY800)
Alternate Relay (RLY800)
Alternate Relay (RLY800)
Power FETs (Q17, Q18,
Q19, Q20, Q21, Q22,
Q23, Q24)
Gate Drive Transformers Astec International
(T3, T4)
Limited / Emerson
---
--
NLDX2 (E160644) UL
Issue Date:
2010-07-21
Page 14 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Object/part or
Description
type/model
technical data
CCN
Marks of
Conformity
85266021970
Provided with Class F insulation system,
designated 155-10C
OBJY2
UL (E94225)
Consist of T2A
(85266022210)
and T2B
(85266022220)
PS2561
SFH6156-2
(System H or J)
LTV817
Provided with Class F insulation system,
designated 155-10C
OBJY2 (E94225)
UL
Rated Isolation voltage 5000Vac, 110 °C
Rated Isolation voltage 4420Vac, 110 °C
FPQU2 (E72422)
FPQU2 (E52744)
UL, CSA
UL, CSA
Rated Isolation voltage 5000Vac, 110 °C
UL, CSA
Cosmo Electronics
Corp.
Liteon Electronics
K1010
Rated Isolation voltage 5000Vac, 110 °C
LTV827
Rated Isolation voltage 5000Vac, 110 °C
Toray Industries
Lumirror S10
U-shape. VTM-2, 105 °C, 0.125mm thick. See
enclosure ID 7-01 for dimension details.
FPQU2
(E113898)
FPQU2
(E169586)
FPQU2
(E113898)
QMFZ2 (E86511)
Sabic Innovative
Plastics
Valox FR1
U-shape. VTM-0, 130 °C, 0.25mm thick. See
enclosure ID 7-01 for dimension details.
QMFZ2
(E121562)
UL
Toray Industries
Lumirror S10
U-shape. VTM-2, 105 °C, 0.125mm thick. See
enclosure ID 7-02 for dimension details.
QMFZ2 (E86511)
UL
Sabic Innovative
Plastics
Valox FR1
U-shape. VTM-0, 130 °C, 0.25mm thick. See
enclosure ID 7-02 for dimension details.
QMFZ2
(E121562)
UL
Manufacturer/
trademark
Network Power
Astec International
Limited / Emerson
Network Power
Power Transformer (T2) Astec International
Limited / Emerson
Network Power
Auxiliary Transformer
(T1)
Optocoupler (IC406)
Alternate Optocoupler (IC406)
Alternate Optocoupler (IC406)
Alternate Optocoupler (IC406)
Optocoupler (IC403,
IC404)
Base Insulator (located
between the base
enclosure and the PWB)
Alternate Base Insulator (located
between the base
enclosure and the PWB)
Cover Insulator (located
between the Cover
enclosure and
Components)
Alternate Cover Insulator (located
between the Cover
enclosure and
Components)
NEC
Vishay Infrared
Components Inc
Liteon Electronics
UL, CSA
UL, CSA
UL
Issue Date:
2010-07-21
Page 15 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Object/part or
Description
Manufacturer/
trademark
type/model
technical data
CCN
Marks of
Conformity
LED PWB Insulator
Sabic Innovative
Plastics
Toray Industries
Valox FR1
QMFZ2
(E121562)
QMFZ2 (E86511)
UL
Sabic Innovative
Plastics
Valox FR1
VTM-0, 130 °C, 0.25mm thick. See enclosure ID 703 for dimension details.
VTM-2, 105 °C, 0.125mm thick. See enclosure ID
7-03 for dimension details.
VTM-0, 130 °C, 0.25mm thick. See enclosure ID 706 for dimension details.
QMFZ2
(E121562)
UL
Toray Industries
Lumirror S10
VTM-0, 130 °C, 0.25mm thick. See enclosure ID 7- QMFZ2
06 for dimension details.
UL
Sabic Innovative
Plastics
Valox FR1
VTM-0, 130 °C, See enclosure ID 7-04 for
dimension details,
0.50 mm thick
QMFZ2
(E121562)
UL
Sabic Innovative
Plastics
Sanyo Denki
Valox FR1
AVC
DB03628B12S
12Vdc, 0.80A
Various
Various
UL
Various
Various
Constructed with plastic , rated minimum V-2 min
85 deg C
Rated min.12Vdc, min. 8A
QMFZ2
(E121562)
GPWV2
(E46810)
GPWV2
(E158191)
QMFZ2
UL
9GV3612P3J03
VTM-0, 130 °C, 0.50 mm thick. See enclosure ID
7-05 for dimension details,
12Vdc, 0.75A
ECBT2
UL
Various
Various
AVLV2
UL
Secondary
Various
Interconnecting cable
PRI-CTRL PWB (located Various
next with Bulk Capacitor
C43)
Main PWB
Various
Various
Mark with VW-1 or FT-1, rated 300 V, 105 °C, min.
16 AWG, with green and yellow colour
Mark with VW-1 or FT-1, rated 300 V, 105 °C
AVLV2
UL
V-0, 130 °C overall size 41.0 x 29.0 mm, 1.2mm
thick approximate. See enclosure 5-01 for trace
layout.
V-0, 130 °C, overall size 259.3 x 75.9 mm, 2.0mm
ZPMV2
UL
ZPMV2
UL
Alternate LED PWB Insulator
Surge PWB Insulator for
Model DS1050-3-001-FF
only
Alternate Surge PWB Insulator for
Model DS1050-3-001-FF
only
Insulator (located
between Primary parts
and Secondary FFC
wire)
PRI-CTRL PWB
Insulator
Fan
Alternate Fan
Output Connector (SK3)
Alternate Output Connector (SK3)
Earthing Wire
Lumirror S10
Various
Various
UL
UL
UL
Issue Date:
2010-07-21
Page 16 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Object/part or
Description
Manufacturer/
trademark
type/model
technical data
CCN
Marks of
Conformity
thick approximate. See enclosure 5-02 for trace
layout for Model DS1050-3 and 5-03 for trace
layout for Model DS1050-3-001-FF.
V-0, 130 °C.
ZPMV2
UL
V-0, 130 °C. Overall measures approximately 31.5
x 29.0 mm, 2.0mm thick.
L -shape. Aluminum. Overall dimension
approximately 32 mm by 32 mm by 71 mm, 2 mm
thick
Aluminum. Overall dimension approximately 62 mm
by 15 mm by 32 mm
L-shape. Aluminum. Overall dimension
approximately 28 mm by 7 mm by 30 mm, 2 mm
thick
Aluminum. Overall dimension approximately 49 mm
by 12 mm by 30 mm
ZPMV2
UL
--
Tested in
equipment
--
Tested in
equipment
Tested in
equipment
--
Tested in
equipment
Aluminum. Overall dimension approximately 20 mm
by 28 mm by 32 mm
Rated min. V-1, min. 120 °C.
Rated min. 300 V, 105 °C, marked with VW-1 or
FT-1
Aluminum. Overall dimension approximately 278
mm by 80 mm by 40 mm
Suitable for use on each type of surface to which
applied, rated for maximum surface temperature
specified.
--
Tested in
equipment
UL
UL
LED PWB (located next
with C56)
Surge PWB for Model
DS1050-3-001-FF only
Heat Sink (HTSK1,
located at Primary Side)
Various
Various
Various
Various
Various
Various
Heat Sink (HTSK2,
located at Primary Side)
Heat Sink (HTSK4,
located at Secondary
Side)
Heat Sinks (HTSK6,
HTSK16 located at
Primary Side)
Heat Sink (HTSK7,
located at Primary Side)
Insulation Tape
Heat Shrinkable Tube
Various
Various
Various
Various
Various
Various
Various
Various
Various
Various
Various
Various
Enclosure
Various
Various
UL Marking Label (If
provided)
Various
Various
--
OANZ2
YDPU2
-PGDQ2 or PGJI2
Tested in
equipment
UL
Issue Date:
2010-07-21
Page 17 of 17
Report Reference #
E186249-A133-UL
2012-01-09
Enclosures
Type
Supplement Id
Description
Photographs
3-01
Overall front view
Photographs
3-02
Overall rear view
Photographs
3-03
Front view (with forward airflow option)
Photographs
3-04
Front view (with reverse fan option)
Photographs
3-05
Front view (with reverse fan and fan filter option)
Photographs
3-06
Rear view
Photographs
3-07
Top view
Photographs
3-08
Internal overall view
Photographs
3-09
Internal view (without FFC insulator)
Photographs
3-10
Internal view (without FFC insulator)
Photographs
3-11
PWB Solder side
Schematics + PWB
5-01
PWB Layout of Pri Ctrl board
Schematics + PWB
5-02
PWB Layout of Main board for Model DS1050-3
Schematics + PWB
5-03
PWB Layout of Mainboard PWB for DS1050-3-001-FF
Schematics + PWB
5-04
PWB Layout of Surge PWB for Model DS1050-3-001-FF
Miscellaneous
7-01
Base Insulator
Miscellaneous
7-02
Cover Insulator
Miscellaneous
7-03
LED PWB Insulator
Miscellaneous
7-04
Insulator located between Primary parts and Secondary FFC wire
Miscellaneous
7-05
PRI CTRL Insulator
Miscellaneous
7-06
Surge PWB Insulator for Model DS1050-3-3-001-FF
Diagrams
Manuals