Modular RPP, 415V, 277kVA, Higher AIC Ratings August 2013 Schneider Electric – May 2011 Table of Contents ● Overview ● Skus ● Configuring and Ordering Schneider Electric – May 2011 Modular RPP . ● Higher Short Circuit Current Ratings for the, 415V, 277kVA Modular RPP. ● 400A Input Breaker. ● 300mm in width, width color: Raven Black. Black ● Modular Power Distribution, 72 pole ● Option for One 400A subfeed breaker Schneider Electric – May 2011 Orderable Skus ● Modular RPP Sku’s MODEL # SCCR (30KAIC) AMPS (A) VOLTAGE (V) RATING (%) AC MAINS CB 400 Amp SUBFEED CB COMMUNICATION CONVERTER (Slide 9) INFRA-RED WINDOWS (Slide 7) MAIN CURRENT TRANSFORMERS (Slide 8) PLUGIN CB QMLE10653 YES* 320 415 80 X X X X X X QCBA50136 YES* 400 415 100 X X X X X X QCBA51256 YES* 400 415 100 X X X X X QCBA51815 YES* 400 415 100 X X X X QCBA52224 YES* 400 415 100 X X X X X *Short Circuit Current Rating of the unit will depend upon the lowest SCCR of the modular breakers used. The above listed models carry a series interrupt and short-circuit withstand rating of 30,000 RMS symmetrical amperes at 415Y/240V, but are limited to the short-circuit rating of the lowest rated installed power distribution module. The power distribution modules are rated as follows when used with the above listed models: •Model PDM3520IEC309-xxxx, rated 30,000 AIC symmetrical amperes at 240V •Model PDM1320IEC-3P-1-x, rated 30,000 AIC symmetrical amperes at 240V •Model PDM3540IEC309-xxx, rated 10,000 AIC symmetrical amperes at 240V •Model PDM3540IEC309-xxx HC, rated 30,000 AIC symmetrical amperes at 240V (Must be ordered through QSKU process) Schneider Electric – May 2011 FIXED MOUNT CB Skus Continued ● Whips: PDM3540IEC309-xxx HC, rated 30,000 RMS symmetrical amperes att 240V Q skus: k Schneider Electric – May 2011 Model # Custom Whip QCMO55411-xx QCMO57587-xx QCMO24783-xx QCMO26701-xx QCMO27911-xx QCMO28261-xx QCMO82145-xx QCMO58258-xx QCMO28634-xx QCMO29054-xx QCMO29341-xx QCMO58682-xx QC O5868 QCMO82466-xx QCMO82730-xx QCMO83327-xx QCMO83563-xx PDM3540IEC309-200 HC PDM3540IEC309-260 HC PDM3540IEC309-320 HC PDM3540IEC309-380 HC PDM3540IEC309-440 HC PDM3540IEC309-500 HC PDM3540IEC309-560 HC PDM3540IEC309-620 HC PDM3540IEC309-680 HC PDM3540IEC309-740 HC PDM3540IEC309-800 HC PDM3540IEC309-860 35 0 C309 860 HC C PDM3540IEC309-920 HC PDM3540IEC309-980 HC PDM3540IEC309-1040 HC PDM3540IEC309-1680 HC Product design benefits and notes • • Customers are now able to deploy p y modular data center distribution products in environments exceeding 10kA of available fault current Robust protection for mission critical applications. Schneider Electric – May 2011 Review of Components ● Infrared Windows •These are located around the unit to view the heat signatures g of the bussing g of the input and outputs. -Arc-Resistant up to 50kA, -Outdoor certified -Infrared windows allow thermal, ultraviolet, visual and fusion technologies to be used without exposing personnel to live equipment equipment. -Has Quadraband™ multispectral optics, allowing inspection with any camera for total flexibility. Schneider Electric – May 2011 Components ● Current Transformers •Enables input p current monitoring g of each p phase. -0.5% Linearity -Split-core S lit t type -AC Outputs 0.1A,1A, 5A, 0.333V, 1V, 5V Schneider Electric – May 2011 Components ● Communication Converter • RS-232 to RS-422/485 converter increases networking capability. -RS-232 to 2-wire or 4-wire RS-485 conversion -Automatic Send Data Control -2 KV optical isolation -DIN-Rail mounting -Terminal block for easy RS-422/485 wiring -LED indicators for power, TD, RD -Wide temperature range (-40 to 80°C) 80 C) Schneider Electric – May 2011 Configuring CONFIGURE A STANDARD SOLUTION IN ISX DESIGNER USING: PDPM288G6H Modular Power Distribution Unit, 266kVA, 400A, 480V:415V Auto-transformer AP8888 Rack PDU 2G, Metered, ZeroU, 23.0kW, 240V, (30) C13 & (12) C19 or Equivalent RPDU PDM3540IEC309-260 Module whip 3 Pole 5 Wire 40A IEC 309 260cm or Equivalent Modular whip Schneider Electric – May 2011 Configure racks with AP8888 RMPDU Schneider Electric – May 2011 Configure g the Power Zone with PDPM288G6H Modular Power Distribution Unit Schneider Electric – May 2011 ISX Designer will automatically provide PDM3540IEC309-xxx whips Schneider Electric – May 2011 Submit the solution for review with a Special Request: Schneider Electric – May 2011 Approver will make the necessary changes and approve the solution. Questions? Schneider Electric – May 2011