Slip-on, Wire-Wrap ® , TERMI-POINT ®
Special connection terminal blocks
General information
In measurement and regulation
systems, the conductor cross
sections range mainly up to 1 .5 mm 2 .
In addition to the "linear connection
arrangements " , i .e . the common
terminal strips with compact and
narrow modular terminal blocks, for
example with a screw connection,
"two-dimensional arrangements "
have become increasingly popular,
i .e . connection fields with
appropriate front connection
techniques . These connection
systems are : Slip-on, solder, springcage termination, wire-wrap and clip
connection.
Phoenix Contact offers a
manifold selection of various
terminal block models and special
constructions for the interface area
between electrics and electronics as
338
Phoenix Contact
well as for marshalling distributors.
This means that the required wiring
techniques can be optimally adapted
to the circumstances of installation.
The marshalling plugs provide a
high packing density with different
connection methods . The simple
mounting and convenient operation
allow practical wiring and ensure
reliable contacting of the
conductors.
We are always willing to advise
you on individual developments to
help solve any special problems.
MIN
Slip-on connection
This connection method, which
has been introduced worldwide and
standardized in accordance with
EN 61 210/VDE 0613-6, involves
crimping a slip-on connection sleeve
with a corresponding cross section on
the stripped conductor end . Contact
is made by pushing the slip-on
connection sleeve onto the slip-on
blade . In order to provide a good
connection, attention must be paid to
the size of the connection sleeve, the
conductor cross section and the die of
the fabrication tool.
To support the conductor
insulation, it is crimped together with
the conductor to ensure strain relief
between conductor and connection .
Solder connection
The solder connection has its
origin in communication engineering
and is nowadays still used in
measurement and control plants . In
the case of the manually soldered
Phoenix Contact solder terminal
blocks or solder connectors, the
material, the shape and the
preliminary tin-plating of the soldering
tags fulfill the prerequisites for a good
solder connection.
The hole in the soldering tag or
soldering basin not only facilitates
work with the soldering iron and tinlead soldering, but also provides the
essential mechanical strain relief of the
conductor or the soldering point .
TERMI-POINT ® clip connection
In the case of clip connection in
accordance with DIN 41 611-4, single
or multi-core conductors up to
0 .5 mm 2 (AWG 20) are stripped in
one operation by means of a
pneumatically-operated special tool
and are shot with a clip onto the
rectangular pin so that they are gastight.
The clip and the connection pin
have to meet high standards with
respect to mechanical stability, low
dimensional tolerances and exact
surface treatment .
Spring-cage connection
As in the case of the modular
terminal blocks with spring-cage
connection, a friction-locked contact
between the conductor and the
current carrying metal part is also
guaranteed for the marshalling plugs
with spring-cage connection.
While solid conductors larger than
0 .75 mm 2 can be connected by simply
pushing them in, thin or stranded
conductors are inserted after pushing
down the orange opening lever. The
conductors are always disconnected
by actuating the opening lever.
Coil connection Wire-Wrap ®
This kind of connection requires
that solid strand conductors are
coiled round a sharp-edged, angular
or rectangular pin by means of a
motor-driven pistol . The high
pressure at the pin corners ensures
gas-tight contact points.
The coil connection is standardized
in accordance with IEC 352-1/
DIN EN 352-1 . 4 to 8 coils with a
conductor diameter of between
0.2 and 0 .8 mm (AWG 30-20) are
necessary for a perfect connection.
Wire-Wrap' - registered trademark of
the Gardner-Denver company
TERMI-POINT' - trademark of AMP Incorporated
Phoenix Contact
339
Slip-on connection terminal
blocks, UKB and UVKB
UVKB 4-FS (6-2,8-0,8)
UKB 4-FS/FS (4-2,8-0,8)
Terminal width 6.2
(IEC)
[mmz]
rigid
solid
flexible
stranded
I
AWG [A]
Connection data
Slip-on connection 6 .3/2 .8 x 0 .8 mm
20
U
[V]
Terminal width 6.2
(IEC)
[mm2 ]
800
')
0.2-4
0 .2-4
Connection data
Slip-on connection 6 .3/2 .8 x 0 .8 mm
9
Test socket, for test connection with MPS test plug or
RPS reducing plug
50
D-UVKB 4
19 20 02 4
50
02 03 25 0
10
FBI 10-6
I mo, : 24 A
02 03 25 0
10
EB 2-6
EB 3-6
EB 10-6
ISSBI 10-6
I mo, .: 24 A
24 A
24 A
Ime, ,: 24 A
02 01 15 5
02 01 14 2
02 01 13 9
03 01 50 5
100
100
10 I
10
13
02 33 8
100
IS-K 4
13
02 33 8
100
TS-K
13
02 21 5
100
TS-K
13 02 21 5
100
06 01 29 2
100
PSB 3/10/4
06 01 29 2
100 '
02 01 30 4
100
PSBJ 3/13/4
02 01 30 4
100
SZS 0,6 x 3,5
1205053
10
PSBJ 3/13/4
03 01
Screwdriver
Zack marker strip, 10-section, white
Dimensions
Width length / cover width
[mm]
Height (NS 35,7 .5 / NS 35/151 NS 32)
[mm]
Technical data in accordance with IEC / DIN VDE
Max. load current / cross section
[A]/[mm']
[mm2]
Max . cross section with insertion bridge (solid/stranded)
Rated surge voltage / contamination class
[kV[ /Surge voltage category / insulating material group
-/Connection capacity
Stranded with ferrule without / with plastic sleeve
[mm , ]
Multi-conductor connection (2 cond. with same cross section)
[mm']
Solid / stranded
Stranded with ferrules without plastic sleeve
[mm-]
[mm , ]
Stranded with TWIN ferrule with plastic sleeve
Stripping length
[mm]
Internal cylindrical gauge (IEC 60 947-1)
Thread
Torque
[Nm]
Insulation material
Inflammability class in acc . with UL 94
Approval data (UL/CUL and CSA)
UL/CUL : [V] / [A] / AWG
Nominal voltage current r conductor sizes
CSA : [V] / [A] / AWG
ZB 6 (for order data, see page 397)
Phoenix Contact
ZB 6 (for order data, see page 397)
6 .2/48/1 .5
44/51 .5/49
6 .2/68/2 .2
44/51 .5/49
20/1
8/3
III / I
32/4
4/4
6/3
III / I
0.25 - 4 / 0.25 - 2 .5
PA
V2
0 .2 - 1 .5 / 0 .2 - 1 .5
0 .25 - 1 .5
0 .5 - 2 .5
8
A3
M3
0 .6 - 0 .8
PA
V2
300 / 25 / 28 -12
') Current and voltage data for slip-on connections in acc . with
EN 61 210 are also dependent on nom . size, material, and
insulation of the receptacle and conductor cross section.
340
10 i
50 5
IS-K 4
€T PSB 3/1014
Test socket, insulated, only used above FBI, ISSBI.
for test connections with lest plug MPS or RPS
NV
19 60 10 7
D-UKB 4
: 20 A
500
50
Cover
ISSBI 10-6
32
19 54 01 6
19 60 01 3
I , .,, : 20 A
24-12
UVKB 4-FS (6-2 .8-0 .8)
UKB 4-FS/FS (4-2,8-0,8)
FBI 10-6
U
[V[
50
Terminal block, with universal foot for mounting on C, or
u, with slotted 6 .3/2.8 mm flat connectors
Fixed bridge, for cross connections in the
terminal center, screw heads with insulating
collar . 10-position, divisible, with 10 screws
Insertion bridg , fully insu .,
2-po . .
r~ , p°, 1 n n, n
fully insulated,
3-pos.
d
ib e, ns
d s ne
10- o .
Isolator bridge bar, 10-position . divisible, with 10Wrd~t~rr
screws, for switchable branches with
Bridge bar IS-K 4 as distance piece
Separating plate, for electrical separation
of neighboring bridges, later
[ _J
slide-in mounting, no loss of pitch
Partition plate, for visual and electrical
separation of terminal groups, 2 .3 mm thick
I
[A]
Pict '
Pkg.
Gray
AWG
Order No.
Order No.
Color
flexible
stranded
Type
Type
Description
rigid
solid
2 ) Dependent on the slip-on connection sleeve.
UVKB 4-FS/FS (8-2,8-0,8)
Terminal width 6 .2
(EC)
f]
rigid
solid
flexible
stranded
UHK 4-FS/FS (12-2,8-0,8)
AWG [A]
U
[V]
Terminal width 6 .2
(IEC)
[mm']
32
)
800
')
Connection data
Slip-on connection 6.3/2 .8 x 0.8 mm
Connection data
Sip-on connection 6-3/2 .8 x 0 .8 mm
3B
NV
TIPP
Order No.
Pcs.
Pkt .
UVKB 4-FS/FS (8-2,8-0,8)
1953017
041VKB 4
FBI 10-6
.24A
rigid
solid
flexible
stranded
AWG [A]
40
')
UHK 4-FS (8-2,8-0,8)
U
[V]
800
"a RV'LR/PRS
Terminal width 6 .2
(IEC)
[mm l]
tBI 10-6
I,,24A
SP
4
TS4(
EV'LR/PRS
UHK 4-FS (8-2,8-0,8)
20 17 23 7
50
50
D-HK 4
20 02 02 2
50
02 01 15 5
02 01 14 2
0201139
100
100
10
D-UVK 4
1922022
50
SZS 0,6 x 3,5
1205053
10
UHK 4-FS/FS (12-2,8-0,8)
20 17 22 4
1920024
50
D-HK 4
20 02 02 2
02 03 25 0
10
13 02 21 5
100
D-UVK 4
PSB 311014
06 01 29 2
100
PSBJ 3113/4
02 01 30 4
100
IB 6 (for order data, see page 397)
19 22 02 2
ZB 6 (for order data, see page 397)
800
')
50
50
100
24-12 40
')
Pcs.
Pkt.
Pkt
13 02 33 8
U
[V]
Order No.
Order No .
10
I
AWG [A]
Type
Type
0301505
flexible
stranded
Screw connection
0 .2-4
0 .2-4
Slip-on connection 6 .3/2 .8 x 0 .8 mm
EB 2-6
EB 3-6
EB 10-6
N
rigid
solid
50
I mo, ;
30 A
30 A
30A
ZB 6 (for order data, see page 397)
6 .2 / 68 / 2 .2
44 / 51 .5 / 49
6.2/54/2 .3
51 .5/59/56 .5
6 .2/54/2 .3
51 .5/59156.5
32/1
40/11
8/3
Ill/I
8/3
III / I
40/4
4/4
8/3
III / I
0 .25 - 4 / 0 .25 - 2 .5
PA
V2
300/25/
PA
V2
0 .2 - 1 .5 / 0.2 - 1 .5
0 .25 - 1 .5
0 .5 - 2 .5
9
A3
M3
0 .6 - 0 .8
PA
V2
250/25/–
600/20/22-14
250/25/28-12
600/20/28-14
Phoenix Contact
341
VBST 4 slip-on connection
terminal blocks and
equipotential bonders for
module plugs
VBST 4-FS (6-2,8-0,8)
with contact pin fur module plug
Terminal width 6 .2
(IEC)
[mm 2 ]
rigid
solid
flexible
stranded
I
AWG [Al
U
[V]
Connection data
0 .2-4
0 .2-2 .5
24-12 32
Slip-on connection 6 .3/2.8 x 0 .8 mm
')
Nominal current of the module connector per position : 13
800
')
(IEC)
[mm2]
rigid
solid
flexible
stranded
I
AWG [A]
U
[V]
30
'I
800
'1
Connection data
Slip-on connection 6 .3/2 .8 x 0 .8 mm
NV
Description
Color
Type
Order No .
Pcs.
Pkt .
VBST 4-FS (6-2,8-0.8)
08 52 01 2
50
Type
Order No.
PVB 2
0870023
10
PVB 3
0870036
10
Equipotential bonder, for mounting on soar, with slotted
6.3/2.8 mm flat plugs, 20 slots, terminal width : 35.6 mm
PVB 5
0870052
10
Equipotential bonder, for mounting on lo-r . with slotted
6.3/2 .8 mm flat plugs . 40 slots, terminal width : 66 .6 mm
PVB 10
0870120
Terminal block, for mounting on u . with slotted 6.3/2 .8 mm flat
plugs, for equipotential bonding over 2 terminal blocks (8 slots),
terminal width : 17 mm
Equipotential plugs, for mounting on Lr, with slotted 6 .3/2 .8 mm
flat connectors.. 8 slots,
terminal width : 17 mm
Equipotential bonder, for mounting on u. with slotted
6 .3/2 .8 mm flat plugs . 12 slots, terminal width : 23.2 mm
t
End cover and partition plate
Gray
Insertion bridge, fully insul . .
fully insulated,
divisible . insulated spine
Screwdriver
2-pos.
3-pos.
10-pos.
Zack marker strip, 10-section . white
Dimensions
Width it length cover width
[mm]
Height (NS 35/7,51 NS 3515)
[mm]
Technical data in accordance with IEC / DIN VDE
Max . load current / cross section
[A)/[mm2]
Max- cross section with insertion bridge (solid/stranded)
[mm 2]
Rated surge voltage / contamination class
[kV] / Surge voltage category i insulating material group
-/Connection capacity
Stranded with ferrule without l with plastic sleeve
[mm%]
Multi-conductor connection (2 cond . with same cross section)
Solid / stranded
[mm 2 ]
Stranded with ferrules without plastic sleeve
[mm']
Stranded with TWIN ferrule with plastic sleeve
[mm u ]
Stripping length
[mm]
Internal cylindrical gauge (IEC 60 947-1)
Thread
Torque
[Nm]
Insulation material
Inflammability class in acc . with UL 94
The special feature of the VBST 4-FS
(6-2,8-0,8) is the gold-plated contact pin
for the central insertion of a 10-position
module plug . This gives the terminal
block the additional function of a plug-in
coupler, making it possible to connect
single control subassemblies to the
terminal strip in a flash . The module plug
is supplied by AMP Deutschland,
www .amp .com . The AMP type
342
Phoenix Contact
D/TP-VBS
EB2-6
EB 3-6
EB 10-6
SZS 0,6 x 3,5
24A
24 A
24 A
08 51 02 6
50
0201155
02 01 14 2
02 01 13 9
12 05 05 3
100
100
10
10
ZB 6 (for order data, see page 397)
ZB 6 (for order data. see page 397)
6 .2/72/2 .2
39 .5 / 47
see legend / 80 /43 .5 / 51
32/4
2 .5 / 2 .5
8/3
III / I
30/1
8/3
III/I
0 .25 - 4 / 0.25 - 2 .5
0.2 - 1 .5 / 0 .2 1 .5
0.25 - 1
0.5 - 1 .5
8
A3
M3
0.6 - 0 .8
PA
V2
designations and order numbers are e .g.:
10-position socket housing made of
glass-fiber reinforced polyamide, black
No . 925313-1
Contact sockets, taped
No . 163083-7
Contact sockets, individual pins
No . 163084-2 .
PA
V2
') Current and voltage data for slip-on connections in acc. with
EN 61 210 are also dependent on nom . size, material, insulation
of the connection sleeve and conductor cross section.
1
Slip-on connection terminal
blocks, USK
USK 4-FS/FS (8-2,8-0,8)
USK 4-FSR (4-2,8-0,8)
Terminal width 6 .2
(IEC)
[mm,]
Terminal width 6 .2
rigid
solid
flexible
stranded
0 .2-4
Connection data
0 .2-4
Slip-on connection 6 .3/2 .8 x 0.8 mm
I
AWG [A]
U
[V]
24-12 32
.)
800
[A ]
32
')
Connection data
Slip-on connection 6 .3/2 .8 x 0 .8 mm
U
[ V]
800
')
c eus Sp PRS
Description
Color
Type
Order No.
Pkt .
Type
Order No.
P kt.
Terminal block, with universal
foot for mounting on
or u
Gray
USK 4-FSR (4-2,8-0 .8)
02 70 01 8
50
USK 4-FS/FS (8-2,8-0,8)
02 71 01 7
50
Dover
Gray
D-USK 4/10
02 60 02 8
50
D-USK 4/10
02 60 02 8
50
,, 24 A 02 01 15 5
24 A 02 01 14 2
24 A
02 01 13 9
100
100
10
12 05 05 3
10
v
Insertion bridge, fully insul. .
My insulated.
divisible, insulated spine
Screwdriver
2-pos
3-pos
10-pos
H
EB 2-6
EB 3-6
EB 10-6
SZS 0,6 x 3,5
It! marker strip, 10-section
White
Dimensions
Width( length / cover width
[mm]
[mm]
Haight (NS 35/7.5 / NS 35/15/ NS 32)
Technical data in accordance with IEC / DIN VDE
]A)/[mmH]
Wm load current / cross section
Max. cross section with insertion bridge (solid/stranded)
[mmH]
[kV] / lilted surge voltage / contamination class
-/Sege voltage category / insulating material group
Connection capacity
Stranded with ferrule without / with plastic sleeve
[mm-]
loth-conductor connection (2 cond . with same cross section)
Solid . stranded
[mm l
[mmH]
Stranded with ferrules without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
[mm-]
Slipping length
[mm]
Internal cylindrical gauge (IEC 60 947-1)
Thread
Torque
[Nm]
emulation material
Inflammability class in acc . with UL 94
Approval data (UUCUL and CSA)
UUCUL : [V] / [Al / AWG
Nominal voltage / current / conductor sizes
CSA : [V] / [A] / AWG
ZB 6 (for order data, see page 397)
ZB 6 (for order data, see page 397)
6 .2 / 42 .5 / 1 .3
45 .5 / 53 / 50 .5
6 .2 / 42 .5 / 1 .3
45 .5/53/50 .5
32/4
2 .5 / 2 .5
8/3
III / I
32 /')
8/3
III / I
0 .25 - 41 0 .25 - 2 .5
0 .2 - 1 / 0 .2 - 1 .5
0 .25 - 1 .5
0 .5 - 2 .5
9
A3
M3
0 .6 - 0 .8
PA
V2
PA
V2
600 / 20 / 28 - 12
600 / 20 / 28 - 12
600/20/600/20/-
Phoenix Contact
343
Double-level terminal block
with screw/slip-on connection
Operating current depending on ambient temperature
(conductor cross section 1 mm r or 2.5 mm3)
20
16
VKK 4-FS
12
Terminal width 7 .62
(IEC)
[mm]
This terminal block is designed for
multiple connections in a restricted space.
On the one hand, it has screw
connections for 4 mm 2 stranded
conductors, and on the other hand, it
permits the connection of one 6 .3 mm
slip-on sleeve or two 2 .8 mm slip-on
sleeves . In addition, it is possible to connect
polarized STG . . .-VKK multi-position
module plugs on both levels and on both
connection sides (instead of the 2 .8 mm
connection sleeves).
Due to the closed insulation housing, an
end cover is no longer required as an
accessory. The terminal block is 7 .62 mm
wide in accordance with the pitch
dimension of the multiposition module
plugs . There is a slight level offset within the
housing between the upper and the lower
levels to improve accessibility to the lower
level . The housing shows no level offset
externally. Also to improve handling, the
offset on the screw side is greater than on
the slip-on connection side.
The terminal blocks are supplied
interlocked, i .e . as quick-mounting blocks of
10 which snap onto the NS 35/7,5 DIN rail.
The outgoing conductors can be
arranged on the slip-on connection side in
guide lugs . In addition, the housing has
angled slots in this area for mounting flat
plug potential busbars.
The modules are labeled using the
10-section Zack marker strip ZB 7,62 with
vertical printing. Group labels and/or
section formation is possible by means of
the 1 .5 mm thick group marker plate,
SAD-VKK 4 .
344
flexible
stranded
Connection data
0.2-4
0 .2-4
STG-MTN 0,5-1,0
0 .5-1
STG-MTN 1 .5-2,5
1 .5-2 .5
Slip-on connection 6 .3/2.8 x 0 .8 mm
0
AWG [Al
'4
24-12 30 400
20-18 10 3 )
16-14 20 3 )
20
40
60
80
100 120
Ambient temperature [`C]
NV
Description
Color
No. of
pos.
Type
Order No.
Double-level terminal block, for
mounting on u
VKK 4-FS
08 91 01 5
Group marker plate, for group marking with
2 labels type ... 6, 1 .5 mm thick
SAD-VKK 4
1002049
STG 1-VKK 4
STG 2-VKK 4
STG 3-VKK 4
STG 4-VKK 4
STG 5-VKK 4
STG 6-VKK 4
STG 7-VKK 4
STG 8-VKK 4
31 90 31 5
31 90 32 8
31 90 33 1
31 90 34 4
31 90 35 7
31 90 36 0
31 90 37 3
31 90 38 6
10
10
10
10 t
Module socket contact, is inserted into plug
housing STG after the conductor has been
crimped,
for conductors from 0.5 to 1 .0 mm 2
for conductors from 1 .5 to 2 .5 mm %
STG-MTN 0,5-1,0
STG-MTN 1 .5-2,5
31 90 43 8
31 90 50 6
100'
100
Contact removal tool, for removing the
module socket contacts
STG-EW
31 90 44 1
1
STGZ BK
31 93 13 4
10
CRIMPFOX MT 2,5
12 04 03 8
S-FS(2 .8-0,8)
31 91 69 9
SZS 0,6 x 3,5
12 05 05 3
Module plug housing,
for fitting the module socket
Black
1
contacts STG-MTN 2
3
4
5
6
7
Strain relief, for 8-pos. plug
housings STG, divisible for plug
Black
housings with a lower no . of pos.
Crimping pliers, for crimping conductors to the
module socket contacts STG-MTN
Potential busbar, with slotted 6 .3/2.8 mm flat
plugs . max . 40 A,
brass . tin-plated, length : 1 m
Screwdriver
Zack marker strip,
10-section
~MMff.~ -,
While
Dimensions
Width i length
[mm]
Height (NS 35/7,5 / NS 35,15)
[mm]
Technical data in accordance with IEC / DIN VDE
Max . load current i cross section
[A]/[mm'[
Rated surge voltage / contamination class
[kV] / Surge voltage category / insulating material group
-, Connection capacity
Stranded with ferrule without! with plastic sleeve
[mmi]
Multi-conductor connection (2 cond . with same cross section)
Solid / stranded
[mm/)
Stranded with ferrules without plastic sleeve
[mm7 ]
Stranded with TWIN ferrule with plastic sleeve
[mm'']
Stripping length
[mm]
Internal cylindrical gauge (IEC 60 947-1)
Thread
Torque
[Nm[
Insulation material
Inflammability class in acc . with UL 94
') Current and voltage data for slip-on connections in acc . with
EN 61 210 are also dependent on nom . size, material, insulation
of the connection sleeve and conductor cross section .
Phoenix Contact
rigid
solid
1O
1
1
10
ZB 7,62 (for order data, see page 398)
7.6 / 101
55 .5 / 63
30/4
6/3
III / I
0 .25-2 .5/0 .25-2 .5
0 .2-1/0 .2-1 .5
0 .25 - 1 .5
0 .5 - 1 .5
7
A3
M3
0 .6 - 0 .8
PA
V2
-) The nominal voltage amounts to 250 V when using the potential
busbar S-FS(2,8-0,8).
') See load diagram above.
Double-level terminal blocks
with screw/slip-on connection
UKK 4-FS
Terminal width 6 .2
(IEC)
[mm =]
Terminal width 6 .2
rigid
solid
flexible
stranded
Connection data
0 .2-4
0 .2-4
Slip-on connection 6 .3/2 .8 x 0 .8 mm
Description
Color
Double-level terminal block. with universal fool for
mounling on
or i-_r, with screw connection and slotted
6.32 .8 mm flat plugs
Double-level terminal block, as above, however,
~
with slotted 6 .3/2 .8 mm flat'
plugs on both sides
v
Cover
Fixed bridge, for cross connections in the
terminal center, screw heads with insulating
liar, 10-position, divisible, with 10 screws
rtion bridge, fully insul .,
2-pos .
insulated .
3-pos .
uvisible . insulated spine
10-pos .
Isolator bridge bar, 10-position, divisible, with 10
taws. for switchable branches with
Bridge bar IS-K 4 as distance piece
Test socket, for test connection with MPS test
plug or RPS reducing plug
. '.l u U U
1TT~~
AWG
24-12
I
[A]
U
[V]
20
')
400
')
Type
Order No .
Pcs.
Pkt.
UKK 4-FS
27 70 56 1
50
I
U
[A]
[V]
20
) 400
Connection data
Slip-on connection 6 .3/2 .8 x 0 .8 mm
Type
UKK 4-FS/FS
D-UKK 4
Gray
UKK 4-FS/FS
I)
Order No .
Pcs.
. 2771133
50
2770558
50
10
27 70 55 8
50
D-UKK 4
FBI 10-6
1,,,, .: 20 A
02 03 25 0
I,,,, : 20 A
Pkt.
FBI 10-6
I mp, : 20 A
02 03 25 0
10
EB 2-6
EB 3-6
EB 10-6
ISSBI 10-6
I,,,, :20A 0201155
20 A 02 01 14 2
20A
0201139
I,, .,, : 20 A I 03 01 50 5
100
100
10
10
ISSBI 10-6
03 01 50 5
10
IS-K 4
1302338
100
IS-K 4
13 02 33 8
100
PSB 3/10/4
06 01 29 2
100
PSB 3/10/4
06 01 29 2
100
PSBJ 3113/4
02 01 30 4
100
PSBJ 3/13/4
0201304
100
SZS 0,6 x 3,5
1205053
10
UUpUp
Teat socket, insulated, only used above FBI, KB,
ISSBI, for test connections with test plug NIPS or
RPS
Screwdriver
Zack marker strip, 10-section
White
Dimensions
Width ! length I cover width
[mm[
Height NO 3527,5 / NS 35/15 / NS 32)
[mm]
Technical data in accordance with IEC /DIN VDE
Max . load current / cross section
[A]/[mm-]
Max . cross section with insertion bridge (solid/stranded)
[mm,]
Rated surge voltage / contamination class
[kV] / –
-, Surge voltage category / insulating material group
konnection capacity
Stranded with ferrule without / with plastic sleeve
Yiltl-conductor connection (2 cond . with same cross section)
Solid / stranded
[mm°]
Stranded with ferrules without plastic sleeve
[mm ,l
Stranded with TWIN ferrule with plastic sleeve
[mm,]
Stopping length
[mm]
Internal cylindrical gauge (IEC 60 947-1)
Thread
Torque
[Nm]
Insulation material
nflammaoility class in acc. with UL 94
proval data (UUCUL and CSA)
final voltage/current ., conductor sizes
UUCUL : [V[ / [A] / AWG
Important note :
In order to bridge the terminal blocks, remove the prescored
separating plate
ZB 6 (for order data, see page 397)
6 .2/72/1 .5
59 / 66 .5 / 64
ZB 6 (for order data, see page 397)
6 .2 / 72 / 1 .5
59 / 66 .5 / 64
20/4
4/2 .5
6/3
II/I
0 .25-4/0 .25-2 .5
0 .2-1/0 .2-1 .5
025-1 .5
0 .5-1 .5
8
A4
M3
0 .6 - 0 .8
PA
V2
PA
v0
300/20/30-10
300/20/-
') Current and voltage data for slip-on connections in acc . with
EN 61 210 are also dependent on nom . size, material, and
insulation of the receptacle and conductor cross section.
,) Dependent on the slip-on connection sleeve.
Phoenix Contact
345
Universal terminal blocks for
screw and solder connection
UK 2,5 types
The soldering tags are in a zigzag
arrangement in order to increase the
mutual insulation spacing and to improve
accessibility with the soldering iron . The
soldering tag dimensions are 2 .8 x 0 .8 mm,
which means that a common connection
sleeve in accordance with DIN 46 247 can
also be pushed on.
The soldering tags have a 1 .2 mm 0
external hole in which solid connecting
conductors up to 1 .5 mm 2 can be
positioned and soldered to provide strain
relief. Behind the hole there is a notch . This
makes it easier to wrap thin connecting
conductors or establish bridging
connections to neighboring terminal blocks.
An important prerequisite for correct
solder points is for the heat provided by the
soldering iron not to be "absorbed " by the
subordinate metal parts . This is particularly
important for thin connecting conductors
with sensitive insulation . For this reason the
soldering tag has an internal heat bottleneck
with low thermal capacity at the end . At this
point, it also has a 2 .3 mm 0 socket hole,
enabling a test plug to be inserted from
above for voltage connection (through the
screw shafts).
UK 4 types
These terminal blocks are designed for
large connection cross sections and a
variety of circuitry options.
The robust soldering flags allow
connecting conductors of up to 2 .5 mm 2 to
be soldered on with strain relief.
Terminal width 6 .2
(IEC)
rigid
flexible
solid
stranded
[ mm2 ]
Connection data
0.2-2 .5
0.2-1 .5
Solder connection
0 .2-1 .5
0 .2-0 .75
Slip-on connection 6 .3/2 .8 x 0 .8 mm
Description
Terminal block, with universal foot for
mounting on L..) or v _r, screw cone . on
left, solder connection on right
Terminal block, as above, but with
solder connection on both sides
Cover
Fixed bridge, for cross connections in the
terminal center, screw heads with insulating
collar, 10-position, divisible . with 10 screws.
Insertion bridge, fully insul .,
2-pos . .
fully insulated,
3-pos.
divisible, insulated spine
10-pos.
Isolator bridge bar, 10-position, divisible, with 10
screws, for switchable branches with
Bridge bar IS-K 4 as distance piece
Switch bar for 2 terminal blocks, complete, to
increase insulation an end cover must be
interposed
Separating disk, for electrical separation of
neighboring bridges, can be fitted later, no loss of
pitch
Partition plate, for visual and electrical
separation of terminal groups, 1 .5 mm thick
Order No.
Pkt.
Gray
UK 2,5-LOER
30 13 01 0
50
Gray
UK 2,5-LOE/LOE
3011012
50
Gray
D-UK 2,5
30 01 02 2
50
0201155
0201142
0201139
100
10
10
30 03 22 4
50
1205037
10
not bridgeable in terminal center
it
EB 2-6
EB3-6
EB 10-6
F
1 . , 17 .5 A
17 .5 A
17 .5 A
Al
ATP-UK
not necessary
D)
f
SZS 0,4 x 2,5
Zack marker strip, 10-section
White
'! :
q
')
35
36
37
38
38
;~ at
Current and voltage data for slip-on connections in acc . with
EN 61 210 are also dependent on nom . size, material, and
insulation of the receptacle and conductor cross section.
346
Phoenix Contact
17.5
17.5
I)
Type
Test socket, insulated, only used with FBI, ISSBI,
for test connections with test plug MPS or RPS
24-14
24-16
U
[V]
500`
500
Color
Test socket, for test connection with MPS test
plug or RPS reducing plug
Screwdriver
I
[A]
AWG
Dimensions
Width i length / cover width
[mm)
Height (NS 35/7,5/ NS 35/15 / NS 32)
[mm]
Technical data in accordance with IEC / DIN VDE
Max . load current / cross section
[A]/[mm 2]
Max . cross section with insertion bridge (solidistranded)
[mm"]
Rated surge voltage / contamination class
[kV] / Surge voltage category / insulating material group
-/Connection capacity
Stranded with ferrule without / with plastic sleeve
[mm'[
Multi-conductor connection (2 cond . with same cross section)
Solid / stranded
[mm ]
Stranded with ferrule without plastic sleeve
[mm')
Stranded with TWIN ferrule with plastic sleeve
[mm2 ]
Stripping length [mm]
Internal cylindrical gauge (IEC 60 947-1)
Thread
Torque
[Nm]
Insulation material
Inflammability class in acc . with UL 94
Approval data (ULICUL and CSA)
Nominal voltage + current conductor sizes
UUCUL : [V] / [A] i AWG
ZB 6 (for order data, see page 397)
6 .2 / 42 .5 / 1 .5
42 / 49 .5 / 47
17.5 / 2.5
1 .5 /1
6/3
III/I
0 .25-1 .5/0 .25-1 .5
0 .2-1/0.2-1
025-1
0 .5-1 .5
6
Al
M2 .6
0 .5 - 0 .6
PA
V2
Double-level terminal blocks
with screw/solder connection
UKK 3-LOER
UK 4-LOER
r
Terminal width 6 .2
IEC)
(Ien1z ]
rigid
solid
flexible
stranded
Connection data
Solder connection
0.2-4
0 .2-2 .5
0.2-4
0 .2-1 .5
AWG
I
[A]
U
[V]
Terminal width 5 .2
(IEC)
[mm2]
rigid
solid
flexible
stranded
AWG
I
[A]
U
[V]
24-12
24-14
24
24
500
500
Connection data
Solder connection
0 .2-4
0 .2-1 .5
0 .2-2 .5
0 .2-1 .5
24-12
24-16
15
15
400
400
B
Order No .
Pcs.
Pkt.
UK 4-LOER
30 14 01 9
50
Terminal block, with universal foot for
mounting on
or u
UK 4-LOE/LOE
3012011
50
Cover
0-UK 4/10
30 03 02 0
50
02 03 25 0
10
02 01 15 5
02 01 14 2
0201139
03 01 50 5
100
100
10
10
1302338
100
23 03 23 9
1
TS-K
13 02 21 5
100
ATP-UK
30 03 22 4
50
PSB 3/10/4
06 01 29 2
100
PSBJ 3/13/4
02 01 30 4
100
SZS0 .6x3,5
1205053
10
RBI 10-6
,2-6
3-6
.d 10-6
ISSBI 10-6
l,- a , : 24 A
I,
24 A
24 A
24A
: 24 Al
B-K 4
USBR 2-7
:23A
Type
Order No.
P03.
Pkt.
Gray
Blue
UKK 3-LOER
UKK 3-LOER BU
27 78 01 3
27 78 09 7
50
50
Gray
Blue
D-UKK 3/5
D-UKK 3/5 BU
27 70 02 4
27 70 10 5
50
50
DG-UKK 3/5
DG-UKK 3/5 BU
27 70 81 7
2770260
50
50
DP-UKK 3/5
2770794
50
23 03 13 2
10
Color
Description
v
Spacer cover. compensates for level
offset if standard terminal blocks are to
Gray
be fitted adjacently. 2 .5 mm thick
Blue
Spacer plate, compensates
for level offset if standard terminal blocks are aligned
in rows. 2 .5 mm thick
Insertion bridge. divisible,
insulated spine
10-pos.
E B L 10-5
13 .5 A
Separating disk, for electrical separation of
neighboring bridges, can be fitted later . no loss of pitch
TS-KK 3
27 70 21 5
100
Partition plate, for visual and electrical
separation of terminal groups . 1 .5 mm thick
ATP-UKK 3/5
27 78 52 1
50
SZS 0.6 x 3,5
1205053
10
Screwdriver
Zack marker strip, 10-section
Z86 (for order data, see page 397)
6.2 / 56 / 1 .5
47 / 54 .5 / 52
24/4
2 .5 / 2 .5
6/3
III / I
White
Dimensions
Width I length I cover width
[mm]
[mm]
Height (NS 35/7 .5 / NS 35./15 / NS 32)
Technical data in accordance with IEC / DIN VDE
[A]/[mm2]
Max . load current ! cross section
Max . cross section with insertion bridge (solid/stranded)
[mm2]
[kV]IRated surge voltage ! contamination class
Surge voltage category / insulating material group
-1Connection capacity
Stranded with ferrule without / with plastic sleeve
:mm-]
Multi-conductor connection (2 cond . with same cross section)
[mm-]
Solid / stranded
[mm2]
Stranded with ferrules without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
[mm2]
Stripping length
[mm]
Internal cylindrical gauge (IEC 60 947-1)
Thread
[Nm]
Torque
Insulation material
Inflammability class in acc . with UL 94
ZB 5 (for order data, see page 397)
5 .2 / 70 .512 .5
62 / 69.5 / 67
15/4
2 .5 / 2 .5
6/3
III !I
0 .25-2 .5/0 .25 - 1 .5
0.2 - 1 / 0 .2 - 1 .5
0 .25 - 1
0 .5 - 1 .5
8
A3
M3
0 .6 - 0.8
PA
V2
0 .25 - 4 / 0 .25 - 2 .5
0.2-1/0 .2-1 .5
0.25-1 .5
0 .5-1 .5
13
A3
M3
0 .6-0 .8
PA
V2
250 ! 25 .28 - 12
Phoenix Contact
347
Terminal blocks for WireWrap ® and TERMI-POINT ®
connections
UK 4-TP
Terminal width 6.2
(IEC)
[mm2]
With the Wire-Wrap"' connection
principle, it is possible to connect up to 3
conductors per plug . Two pin dimensions
are common : 1 x 1 mm and 0 .6 x 0 .6 mm.
The length of the pin is usually measured for
three coils. The connection must be broken
to release it and in this case it is destroyed
for ever.
German suppliers of wrapping tools are:
Cooper Tools GmbH,
74354 Besigheim, Germany
Phone :++49/71 43/58 00
Fax :++49/71 43/58 01 08
The TERMI-POINT® versions are
differentiated according to the position of
the plug, which is either longitudinal or
transverse to the terminal block . In order to
ensure easy handling of the tool, the
longitudinally arranged pins should be used
for vertically mounted terminal strips and
the transverse pins for the horizontally
mounted terminal strips.
The length of the pins is usually
dimensioned for shooting on 3 connections.
The pins are available in the following
dimensions:
0.6 x 0 .6 mm . . . Mini TERMI-POINT®
0.8 x 1 .6 mm . . . Standard TERMI-POINT®
0.8 x 2 .4 mm . . . Maxi TERMI-POINT®
The supplier in Germany is:
AMP Deutschland,
63225 Langen, Germany
Phone : ++49/61 03/70 90
348
Phoenix Contact
rigid
solid
flexible
stranded
Connection data
0 .2-4
per WW conn . [mm] 1 x 1
per TP conn . [mm] 1 .6 x 0.8
per TP conn . [mm] 2 .4 x 0.8
Description
Color
Universal terminal block, with universal foot
for mounting on C or.r,c with
1 x 1 WW pin
Universal terminal block, with TP pin 1,6 x 0 .8,
longitudinal pin for vertical mounting
transverse pin for horizontal mounting
Universal terminal block, with TP pin 2 .4 x 0 .8,
longitudinal pin for vertical mounting
transverse pin for horizontal mounting
Cover
Spacer cover, compensates for level offset if
standard terminal blocks are to be fitted
adjacently, 2 .5 mm thick
Spacer plate, compensates for level offset if
standard terminal blocks are to be fitted
adjacently, 2 .5 mm thick
Fixed bridge, for cross connections in the
terminal center, screw heads with insulating
collar, 10-position, divisible, with 10 screws
Insertion bridge, fully insul .,
2-pos.
fully insulated,
3-pos.
divisible, fully insulated
10-pos. ..
Partition plate, for visual and electrical
separation of terminal groups, 2 .5 mm thick
-i
ttNY~7r
II :I! li II II :I 1. .II.
1 ['. ] [ - ".
i h{ i 'l
1
0 .2-4
AWG
I
[A]
U
[V]
24-12
26-20
28-22
24-20
10
10
4
5
250
250
250
250
Type
Order No.
Pcs.
Pkt I
UK 4-WW (1 x 1)
3086076
50
UK 4-TP (1,6 x 0,8) L
UK 4-TP (1,6 x 0,8) Q
30 86 00 5
3086018
50
50
UK 4-TP (2,4 x 0,8) L
UK 4-TP (2,4 x 0,8) 0
30 86 02 1
30 86 03 4
50
50
D-UK 4/10
30 03 02 0
50
10 A
0203250
10
:10A
10 A'i
10A
0201155
0201142
0201139
100
100
10
1205053
10
FBI 10-6
EB 2-6
EB3-6
EB10-6
l,,
Screwdriver
SZS 0,6 x 3,5
Zack marker strip, 10-section
White
Dimensions
Width / length / cover width
[mm]
Height (NS 35/7,51 NS 35/15 / NS 32)
[mm]
Technical data in accordance with IEC 1 DIN VDE
Max . load current i cross section
[A]/[mm ui
Max . cross section with insertion bridge (solid/stranded)
[mm 2]
Rated surge voltage / contamination class
[kV] / Surge voltage category / insulating material group
-!Connection capacity
Stranded with ferrule without / with plastic sleeve
[mm2]
Multi-conductor connection (2 cond . with same cross section)
Solidi stranded
[mm ,]
Stranded with ferrules without plastic sleeve
[mm-]
Stranded with TWIN ferrule with plastic sleeve
[mm 2]
Stripping length
[mm]
Internal cylindrical gauge (IEC 60 947-1)
Thread
Torque
[Na]
Insulation material
Inflammability class In acc. with UL 94
Approval data (UUCUL and CSA)
Nominal voltage current conductor sizes
UL/CUL : [V] / [A] / AWG
ZB 6 (for order data, see page 397)
6.2 / 42 .5 / 1 .8
68 / 75 .5 / 73
10/4
4/3
III/I
0 .25 - 4 / 0.2 - 1 .5
0 .2-1/0 .2-1 .5
025-1 .5
0 .5-2 .5
9
A3
M3
0 .6-0.8
PA
V2
UK 4-TP/TP
Terminal width 6 .2
[IEC)
[nm2]
rigid
solid
flexible
stranded
Connection data
per TP cond . [mm] 2 .4 x 0 .8
UKKB 3-TP
AWG
I
[A]
U
[V]
Terminal width 5 .2
(IEC)
[mmz [
24-20
10
5
250
250
Connection data
0 .2-4
per TP cond . [mm] 2 .4 x 0 .8
rigid
solid
flexible
stranded
0 .2-2 .5
AWG
I
[A]
U
[V]
24-12
24-20
10
5
250
125
Nan
Type
Order No .
Pcs.
Pkt
50
50
UKKB 3-TP (2,4 x 0,8) L
UKKB 3-TP (2,4 x 0,8) Q
27 73 25 4
27 73 26 7
50
50
50
D-UKKB 3/5
27 71 02 3
50
DG-UKKB 3
27 70 85 9
50
DP-UKKB 3
2770804
50
23 03 13 2
10
ATP-UKKB 3
2771065
50
SZS 0,6 x 3,5
12 05 05 3
10
Type
Order No .
Pcs.
Pkt .
UK 4-TP/TP (2,4 x 0,8) L
UK 4-TP/TP (2,4 x 0,8) Q
30 86 04 7
30 86 06 3
041K 4/10
30 03 02 0
EBL 10-5
Zl:l 6 (for order data, see page 397)
I .. : 10 A
ZB 5 (for order data, see page 397)
6 .2/42 .5/1 .8
68/75.5/73
5 .2/67/2 .5
85/92.5/90
10/0 .5
10/4
4/2 .5
4/3
III / I
0 .25 - 2 .5 / 0 .25 - 1 .5
PA
V2
0 .2 - 1 / 0 .2 - 1 .5
0 .25-1 .5
0 .5 - 1 .5
8
A3
M3
0.6 - 0 .8
PA
V2
300/5/28-12
Phoenix Contact
349
Marshalling plugs
Dimensional drawing
!®® e, !!INIIN®B9
146
38
90
~~®®a®®®®® gm ygyl ~
11PE118MIFIBEMIME01@ Maoism
poispiRto
MIMIItI Il
lYil 1
M1' !PI IMIii
MS MIDB §180111181W
O
W 80/80
etimem ptommom
General information
High packing density, a practical
connection principle and easy mounting are
the main features of these marshalling plugs.
In accordance with the 8-bit pattern, 10
rows of 8 chambers are arranged
horizontally in the marshalling plug housing.
The marshalling plugs are available with
the following connection techniques and
combinations of these:
6 .3/2 .8 mm plug-in connection
Solder connection
Wire-Wrap' (WW) connection
TERMI-POINT (TP) connection and
Spring-cage connection.
Each marshalling plug element can be
marked with the standard labels, while the
individual chamber coordinates are marked
with marker pins.
The potential busbar is subsequently
inserted in grooves in the fitted marshalling
plug blocks . This allows the reference
voltage levels such as supply voltage, control
ground or shielding to be comfortably
supplied at any point .
Assembly
The antitorsion polyamide housing is
provided with 4 mounting flanges which
overlap neighboring marshalling plugs and
simplify fitting. This means : dimensionally
correct mounting with one screw for two
flanges.
Using the W 80-T/AL-NS 35 holder for
the marshalling plug, any number of blocks
can be aligned next to each other on the
DIN rails, NS 35/7,5, NS 35/15 or
NS 35/15-2,3 . The holder is made of
aluminum and is fixed on the DIN rail in a
pitch matching the dimensions of the
marshalling plug.
If marshalling plugs are to be mounted
adjacently and on the top of each other, a
supporting frame of 10 x 10 mm profiles is
necessary.
350
Phoenix Contact
80-position with 6.32 .8 mm flat plugs
I
[A)
16
')
Connection data
Slip-on connection 6 .3/2 .8 x 0 .8 mm
Description
Marshalling plug, 80-position, per chamber:
one metal part with three 6 .3/2 .8 mm flat
plugs on both sides
Marshalling plug, 160-position, per chamber:
two metal parts with two 2 .8 mm flat plugs on both
sides
Marshalling plug, 80-position, per chamber: one metal part
with three 6 .3_/2 .8 mm flat plugs on one side and two 6 .3/2 .8
mm flat plugs and a solder connection on the other side
Marshalling plug, 80-position, per chamber: one metal
part with two 1 .5 mm2 spring-cage connections on one
side and three 6 .3/2 .8-mm flat plugs on the other side
Holder, for mounting on u, U, i f . for fixing
marshalling plugs, aluminum . dimensions see drawing
above
Potential busbar with slotted 6 .3/2.8 mm flat plugs,
~,a~":AMR
brass, tin-plated . length : 1 m
OOO
Plastic sheath'), as touch protection,
for 6 .3 slip-on sleeves
for 2 .8 slip-on sleeves
Guide ring plastic, for looming conductors : is screwed
on the supporting frame, bore hole : 6 mm 0
Equipotential busbar, with 2 .4 x 0-8 TP pins, pin
spacing 7 .62 mm, bronze . tin-plated,
length : 0 .76 rn
Zack marker strip, 10-section,
White
Marker pin, plastic,
unprinted : for individual labeling with M-PEN,
printed : with 1, 2 or 3-figure characters, white
Dimensions
Technical data in accordance with IEC / DIN VDE
Total current per metal part
Rated surge voltage / contamination class
Surge voltage category! insulating material group
Connection capacity
Stranded with 2 .6 mm slip-on sleeve
Stranded with 6 .3 mm slip-on sleeve
Insulation material
Inflammability class in acc . with UL 94
')
U
M
1000
')
Type
Order No .
Pcs.
Pkt.
W 80/80-FS/FS (12-2,8-0,8)
06 11 01 7
5
W 80-T/AL-NS 35
06 14 19 5
S-FS (2,8 x 0,8)
In,p , : 40 A
31 91 69 9
PT/FS 6,3
PT/FS 2,8
06 04 70 7
14 06 70 0
500
500
W 80-FR
06 14 00 1
10
14 01 40 4
14 01 41 7
see dimensional drawing
100
100
ZB 6 (for order data, see page 397)
-
BN W H
BNB WH : . . .')
[Al
[kV] / -
16
8/3
III/I
[mrm`I
[mm2)
Current and voltage data for slip-on connections in acc . with
EN 61 210 are also dependent on nom . size, material, and
insulation of the receptacle and conductor cross section.
PA-F
HB
-) Dependent on the slip-on connection sleeve.
W 80/160
W 80/80-FS/LOE
160-position with 2 .8 mm flat plugs
80-position with 6 .3/2.8 mm flat plugs
and a solder connection on one side
flexible
rigid
AWG
solid
stranded
U
[V]
Comedian data
Sip-on connection 2 .8 x 0 .8 mm
W801160-FSI/FSI (4-2,8-0,8)
80-T/AL-NS 35
400
)
Order No .
Pcs.
Pkt .
0612016
5
0614195
5-FS (2,8 x 0,8)
2
06 04 70 7
1406700
500
500
W80-FR
0614001
10
[A]
24-16
16
16
Connection data
0 .5-2 .5
0 .5-2 .5
Slip-on connection 6 .3/2 .8 x 0 .8 mm
Type
Order No .
Pcs.
Pkt .
W 80/80-FS/LOE 1
06 11 02 0
5
100
100
Type
Order No .
Pcs.
Pkt.
W 80/80-FK 1,5/FS (6-2,8-0,8)
06 13 01 5
4
0614195
2
40 A 31 91 69 9
1
2
W 80-T/AL-NS 35
31 91 69 9
1
S-FS (2,8 x 0,8)
PT/FS 6,3
PT/FS 2,8
0604707
1406700
500
500
PT/FS 6.3
PT/FS 2,8
0604707
1406700
500
500
W 60-FR
0614001
10
W 80-FR
0614001
10
S-TP (2,4 x 0,8)
31 91 70 9
Im„ : 40 A
BN WH
BNB WH : . . .`)
1401404
1401417
see dimensional drawing
Imo
ZB 6 (for order data, see page 397)
100
100
BN WH
BNB WH : . . ."-)
1401404
1401417
see dimensional drawing
16
6/3
III /I
16
6/3
III/I
10
4/3
III/I
PA-F
HB
PA-F
HB
PA-F
HB
Required marking is to be specified, see page 404 .
24-14 10
U
[V]
250
0614195
W 80-T/AL-NS 35
ZB 6 (for order data, see page 397)
ZB 6 (for order data, see page 397)
1401404
1401417
see dimensional drawing
Connection data
Connection data
0.2-1 .5
0 .2-1 .5
Slip-on connection 6 .3/2.8 x 0 .8 mm
S-FS (2,8 x 0,8)
40 A 31 91 69 9
PTUFS 6,3
PT/FS 2,8
BN WH
BNB WH : . . .')
(IEC)
[mm']
W 80/80-FK 1,5/FS
80-pos . with spring-cage connection and one-side
6 .3/2 .8 mm slip-on connection
rigid
flexible
I
[mm')
solid
stranded
AWG [A]
100
100
i, ) For conductors up to 1 .5 mm' .
Phoenix Contact
351
Marshalling distributor RV 4
Load diagram for RV 4, RV 8, and
RVS 10 in acc . with
IEC 60 512-3/DIN IEC 60 512-3
Operating current depending on ambient temperature and
number of connections per pin if all pins are under load
(conductor cross section 0 .5 mm2)
0
RV 4 (2,4 x 0,8)
Terminal width 7 .62
(IEC)
[mm]
10 20 30 40 50 60 70 80 90 100
Ambient temperature ['CI
The RV 4 elements can be used to form
frontal pin field connections for 2 .4 x 0 .8
TERMI-POINT C'(TP) connections . The
4-position incoming and outgoing lines are
mirror images of each other due to the
U-shaped design of the metal pin, thus
providing clear wiring of multiconductor
cables twisted in groups of 8 . The pin length
is sufficient for three clip connections one
above the other.
Yellow and gray housings are alternated
in pairs in order to visually emphasize the
groups of twists of 8 . Eyelets on the side of
the housing facilitate tidy cabling.
Plug connections are realized with the
aid of module socket contacts and module
plug housings, whereby a maximum of 8
positions can be combined in function
groups . These are protected against
mechanical stress by the strain relief, STGZ
or STGZ 1.
Plug connections for RV 4, RV 8 and
RVS 10 marshalling distributors
Plug-in connections are effectively made
using the socket contacts and module plug
housings allowing 16 positions max . to be
combined in function groups . These are
protected against mechanical stress by
means of the strain relief, STGZ, STGZ 1
and STGZ 10-RVS and STGZ 20-RVS or the
cable housing, KGS-RV 10 or KGS-RVS 10 .
Q Wire-Wrap, or 1 TERMI-POINT"ii : connection
Q Wire-Wrap° or 2 TERMI-POINTEii i connections
o Wire-Wrap.i i or 3 TERMI-POINT` connections
2 .4 x 0 .8
AWG
24-20
Type
Order No .
Pcs.
Pkt.
RV 4 (2 .4 x 0,8) L
RV 4 (2,4 x 0,8) Q
31 90 01 4
31 90 21 8
50
50
Module plug housing, for
longitudinal pins. color: gray, for
fitting the module socket contacts
STG-MTN
Gray
Yellow
1-pos.
2-pos.
8-pos.
10-pos.
D-RV 4 GY
D-RV 4 YE
STG 1-RV/L
STG 2-RV/L
STG 8-RV/L
STG 10-RV/L
31 90 02
31 90 22
31 90 12
31 90 13
31 90 19
31 90 20
7
1
4
7
5
5
20
20
10
10
10
1
Module plug housing, for
transverse pins, color : black, for
fitting the module socket contacts
STG-MTN
2-pos.
8-pos.
STG 2-RV/Q
STG 8-RV/Q
31 90 24 7
31 90 30 2
10
10
Module socket contact, is inserted into plug
housing STG alter the conductor has been
crimped.
for conductors from 0.5 to 1 mm-
STG-MTN 0,5-1,0
31 90 43 8
100
Contact removal tool, for removing the
module socket contacts
STG-E W
31 90 44 1
STGZ BK
STGZ 1 BK
31 93 13 4
31 93 14 7
10
10
CRIMPFOX MT 2,5
1204038
1
Description
Color
Marshalling distributor, 4-pos ., with universal foot for
mounting on v or u . Alternate pairs in gray and yellow
with 2 .4 x 0 .8 TP pins
pins longitudinal for vertical mounting
transverse pins for horizontal mounting
End element, 7 .62 mm wide, also
for forming sections
Strain relief, for STG 8-position plug housings.
with coupling spring on one side
with double-sided coupling spring
Crimping pliers, for crimping conductors to the
module socket contacts STG-MTN
Zack marker strip . 10-section
White
Dimensions
Width / length
Height (NS 35/7 .5 / NS 32)
Technical data in accordance with IEC / DIN VDE
Rated surge voltage / contamination class
Surge voltage category / insulating material group
Insulation material
Inflammability class in acc . with UL 94
1 ' il
E
1 i[
ZB 6 (for order data. see page 397)
[mm)
[mm]
[kV] / —
— /—
Plug housing . longitudinal, for
RV 4 (2 .4 x 0,8) ...
Plug housing, transverse, for
RV 4(2 .4x0,8) . ..
Phoenix Contact
flexible
stranded
TERMI-POINT'i = trademark of AMP Incorporated
I
I I
11
III
352
TP connection
' see load diagram
rigid
solid
RV 4 (2,4 x 0,8) L RV 4 (2 .4 x 0 .8) 0
7 .62 / 103
61/66
4/3
III / I
PA
V2
I
Marshalling distributors
RV8 and RVS 10
The marshalling distributors have
ht and ten 2 .4 x 0 .8 mm TERMIINT'N (TP) pins respectively for incoming
,d outgoing conductors on either side of
the raised labeling rib . Between the
connection panel and the labeling rib, the
RV8element has two housing grooves into
which potential busbars can be inserted.
The external cross bars function as a
cable duct side wall . The red/white marking
masks with alternate negative/positive
labeling with 1-8 and 1-10 or a-h and a-k
clearly separate the rows of pins.
I
RVS 10-TP (2,4 x 0,8)L
RV 8-TP (2 .4 x 0 .8)
Element width 7 .62
(IEC)
[mm]
rigid
flexible
stranded
solid
2 .4 x 0 .8
TP connection
' See load diagram page 352.
AWG
I
[A]
U
[V]
24-20
5'
250
Element width 6 .2
(IEC)
[mm]
rigid
solid
flexible
stranded
AWG
I
[A]
24-20
TP connection 2 .4 x 0 .8
' See load diagram page 352.
U
[V]
250
'i witcross connection for NLS-CU 6/6 (04 02 16 1)
TERMI-POINT-" = trademark of AMP Incorporated
Description
Type
Order No
a) RV 8-TP (2,4 x 0,8) L
b) RV 8-TP (2 .4 x 0,8) O
31 91 01 3
31 91 21 7
RV 8-PV-TP (2,4 x 0,8) L
31 91 03 9
Pcs.
Pkt.
Type
Order No .
Pcs.
Pkt.
RVS 10-TP (2,4 x 0,8)L
31 92 03 8
5
D-RVS 10
3191437
5
RV 8-SPSA
3193011
Marshalling distributor, 8-position, with
siding loot for mounting on Lr, with
2.4x 0 .8 TP pins
a)ongitudinal pins for vertical mounting
"transverse pins for horizontal mounting
Marshalling distributor'), as above, but
esequipotential bonder with bridged pins,
phs longitudinal for vertical mounting
Marshalling distributor, 10-position, with
siding foot for mounting on u, with
0 .8 TP pins
element, 7.62 or 6 .2 mm wide, also for
ng sections, color : Gray
Ni
5
D-RV 8
31 91 02 6
Equipotential busbar , with slotted 6 .3/2 .8 mm
bat plugs . max. 40 A, brass, tin-plated, length : 1 m
S-FS(2,8-0,8)
31 91 69 9
Equipotential busbar, with 2.4 x 0 .8 TP pins, pin
spacing 7 .62 mm, bronze, tin-plated, length : 0 .76 m
S-TP (2,4 x 0,8)
31 91 70 9
1
damp set, for holding together RV .. . blocks, sufficient
kr80 (RV 8) or 90 (RVS 10) marshalling distributors
RV 8-SPSA
31 93 01 1
1
KZMP-RV 8 : 1-8
KZMP-RV 8 : A-H
3191330
31 91 32 7
10
10
KZMP-RVS 8 : 1-10
KZMP-RVS 8 : A-K
3191408
31 91 37 2
10
10
KGS-RV 10
31 92 10 6
10
KGS-RVS 10
31 90 45 4
10
1-pos.
2-pos.
8-pos.
10-pos.
STG 1-RV/L
STG 2-RV/L
STG 8-RV/L
STG 10-RV/L
31
31
31
31
90 12 4
90 13 7
90 19 5
90 20 5
10
10
10
10
STG 1-RV/L
STG 2-RV/L
STG 8-RV/L
STG 10-RV/L
31 90 12 4
31 90 13 7
31 90 19 5
31 90 20 5
10
10
10
10
2-pos.
8-pos.
STG 2-RV/O
STG 8-RV/CI
31 90 24 7
31 90 30 2
10
10
STGZ BK
STGZ 1 BK
3193134
3193147
10
10
a) STGZ 10-RVS
31 92 06 7
bj STGZ 20-RVS
31 92 05 4
Prot marking masks, in positive/negative,
We/red print for marking the individual pins,
silo horizontal printing,
bent 1-8, back 8-1
bunt a-h, back h-a
MMNNMMMM
Cable housing, 40-position complete with
crimp contacts
Module plug housing, for
knghadinal pins, color : gray, for
tang the module socket
contacts STG-MTN (page 352)
Module plug housing, for
bansverse pins, color : black, for
ttlng the module socket
contacts STG-MTN (page 352)
5
Stain relief, for STG 8-position plug housings,
nth coupling spring on one side
talk double-sided coupling spring
Strain relief,
"with single-sided coupling spring, for one
10-position plug housing
"with double-sided coupling spring for two
0-position plug housings
sions
/ length
Height (NS 357.5)
khnical data in accordance with IEC / DIN VDE
Rated surge voltage / contamination class
Surge voltage category / insulating material group
Insulation material
Inflammability class in ace . with UL 94
[mm]
[mm]
[kV] / —
–/
7 .62 / 202
81 .5
6 .2 / 202
81 .5
4/3
III/I
PC
VD
4/3
III/I
PC
Vo
Phoenix Contact
25
353
Miniature circuit-breakers
Circuit-breakers with electronic
triggering
The electronic triggering of the ECP is
specially designed for the selective
safeguarding of all load circuits that are
supplied by a DC 24 V power supply unit.
Switched-mode power supplies switch
off their output and all connected loads for
their own protection as soon as an overload
or short circuit occurs in a load branch due
to a fault.
In this context, selectivity means that
the ECP reacts more quickly to the
overload or short circuit conditions in a
load circuit than the switched-mode power
supply does and therefore only switches off
the faulty circuit.
Miniature circuit-breakers with
thermomagnetic triggering
The combination of thermal and
magnetic triggering effectively protects
against overload as well as short circuits.
Short circuit currents cause the magnetic
part of the characteristic curve to operate
almost without delay. Typical applications
are in the area of information and
communication technology, process
controls, and with devices and systems that
require a high degree of protection against
overload and short circuits . All
thermomagnetic circuit-breakers have
integrated auxiliary contacts for individual
monitoring of the switching status .
Miniature circuit-breakers with
thermal triggering
The thermal triggering of equipment
circuit-breakers depends on the level of the
overload current . This makes them ideally
suited as device protection for AC and DC
consumers, e .g . to protect motors,
transformers and actuators against
overloads . The equipment circuit-breaker
TCP can be inserted in basic terminal blocks
and thus mounted on rails . An integrated
switching function (press/press actuation)
ensures high availability and high flexibility of
the system.
Power distribution through socket
assembly
The thermomagnetic circuit-breaker
TMCP and the electronic circuit-breaker
ECP are characterized by their user-friendly
modular design . The TMCP-SOCKET-M
socket element is used to mount the circuitbreakers on rails, allowing flexible
installation with any number of positions . In
addition, a free combination of the two
circuit-breaker types on one module allows
individual protection, regardless of which
load is to be protected . The termination
elements TMCP-CONNECT-LR are
attached at the beginning and end of the
module structure.
354
Phoenix Contact
Signaling contacts
Socket base TMCP-SOCKET-M allows
individual signaling via the connections 11
and 12 . The signal can be called up
separately for each circuit-breaker. A signal
loop over all circuit-breakers can be realized
quickly and without additional wiring via
connections 13 and 14 in the termination
elements ; all electrical connections of the
main contacts and signal contacts are
located in the socket element . (see TMCP
wiring diagram)
Backup fuse
A backup fuse together with a circuitbreaker must always be used if there is the
risk of the maximum switching current
being exceeded in the event of a fault . The
maximum switching current, the internal
resistance and the resulting backup fuse are
shown in the table below.
TMPC circuit diagram
Device 1
1
0
Device 2
ti
1
0
11 0
011
7
130- 0 0
2
12
\-\l
0 0
2
12
014
Diagram and definitions when switched off and without current.
TMCP and TMC nominal currents, internal resistances and backup fuses
Nominal
current
Max . backup
fuse
[A]
0 .2
0 .3
0 .4
0 .5
0 .6
0 .8
1
1 .5
2
2 .5
3
4
5
6
8
10
12
16
[A]
Any
Any
Any
Any
Any
Any
Any
25
25
25
25
25
25
50
50
50
50
50
Internal resistance [52]
F1 (fast blow)
for DC
39 .3
17 .5
9 .2
6 .8
4 .2
2 .8
1 .6
0 .78
0 .42
0 .26
0 .18
0 .12
0 .092
0 .054
0 .025
0 .022
<_ 0 .02
<_ 0 .02
Ml (normal
for DC/AC
26 .1
11 .6
6 .6
4 .1
3
1 .65
1 .10
0 .47
0 .28
0 .183
0 .124
0 .077
0 .063
0 .045
<_ 0 .02
<_ 0 .02
<_ 0 .02
<_ 0 .02
Switching capacity
in acc . with
EN 60 934
[A]
400
400
400
400
400
400
400
400
400
400
400
400
400
800
800
800
800
800
Selective circuit-breaker, ECP
The new electronic circuit-breaker ECP
3-6 with a width of only 12.5 mm selectively
protects all 24 V DC load circuits — with a
mbination of active electronic current
citation and proven circuit-breaker
technology including electrical isolation.
The ECP 3-6 can be plugged onto the
proven TMCP-SOCKET-M socket element
which guarantees fast and easy mounting as
well as a reduction in logistics costs.
The area of application for the ECP 3-6
extends to all aspects connected with the
power supply unit, since in the case of an
overload, power supply units reduce the
output voltage . As a consequence, the
connected loads would no longer be
sufficiently supplied . This means that if a
fault occurs in one consumer of a system,
the voltage will break down in all load
circuits.
The ECP 3-6 solves this problem by
always limiting the maximum possible
current to 1 .8 times the value of the set
nominal current . Capacitive loads can thus
be switched on, loads, however, are only
switched off in the case of an overload or
short circuit.
An LED and integrated signal contacts
indicate the operating and error states.
N
Width 12 .5
Connection data
` Selectable with a switch
Description
LINE
U
[V DC]
3/6 '
18-32
Type
Order No.
Selective circuit-breaker, can be plugged into TMCP socket.
signaling by two-color LED, floating signal contact . on/off
pushbutton
Modular socket, 2-position, for holding two circuit-breakers, each
with a single position
ECP 3-6
09 16 53 6
TMCP-SOCKET-M
09 16 58 9
Socket termination elements, pluggable both left and right.
contain the connections for querying the module
TMCP-CONNECT-LR
09 16 59 2
Zack marker strip, 10-section.
for labeling in the terminal center
ZB 6 (for order data, see page 397)
White
Dimensions
Width length
Height (NS 35/7,51 NS 35/15)
Technical data in accordance with IEC / DIN VDE
Main contact: Max . load current / cross section
Signal contact : Max . load current / cross section
Switching capacity
Load output
Overload disconnection
Switch-off time .
Electrical isolation
Electron . disconnect
Short circuit current I,
Switch-on delay
Insulation material
Inflammability class in acc . with UL 94
Circuit diagram ECP 3-6
I
[A]
[mm]
[mm]
[A]/[mml ]
[A]l[mm r]
[s]
[s]
[ms]
Pcs.
Pkt.
12 .5 / 60
144/151 .5
50/6//25/4
1/1 .5
Power MOSFET output
typ . 1 .1 x I h
typ . 5at I,>1 .1 x1 .,
typ. 5 . ..0 .1 at I L >1 .8x
Active current limitation . max. 1 .8 x I N
typ. 300
PA-F
Vo
LOAD
Characteristic curve ECP 3-6
Interruption point
typ. 1 .1 x I,
1' l -
it
!l
Short-circuit
disconnection
typ. 100 ms
0
1
2
3
4 IK 5
Min . 1 .05 x I r, Max . 1 .25 x I `
Multiples of the nominal current
Phoenix Contact
355
Thermomagnetic circuitbreaker, TMC
The TMC circuit-breaker is available for
18 different nominal current values, with a
fast or normal blow characteristic curve and
a one, two or three-position main current
path . The auxiliary contacts are available in
the following variants:
1-pos . main current path with 1 N/O
contact or 1 N/C contact
2-pos . main current path with 1 N/O
contact and 1 N/C contact
3-pos . main current path with 1 NIO
contact and 2 N/C contacts .
Note:
When mounted in rows with simultaneous load, mutual thermal
interference occurs . This is equivalent to a rise in the ambient
temperature . It depends on the nominal current, the ambient
temperature, the number of devices and the distance between
devices . The nominal current of the devices can either be
transmitted overdimensioned (see multiplication factor for
temperature behavior) or at only v 80%. Please inquire about the
max . permissible current for the planned serial assembly.
Ambient temperature 'C Multiplication factor
-10
TMC . ..
0 .84
0 0 .92
+ 10
1 .00
+ 20
1 .00
+30
1 .00
Housing width 12 .5
DEC)
[mmz ]
flexible
stranded
Main current path
Connection data
0 .2-6
0.2-4
Auxiliary contacts
Connection data
0.2-2.5
0 .2-1 .5
* For current, see configuration example
+ 40 1 .08
+50
rigid
solid
1 .16
I
U
AWG [A] [V AC/Dq
24-10
24-14
250'65
I)
250.65
+ 60 1 .24
SP ~
Description
Type
Thermomagnetic circuit-breaker, with universal foot
for mounting on E
or Lr
Order No.
Pcs.
Pkt.
TMC. . ..
(see type key below)
Insertion bridge, insulated, 80-pos .
EB 80-12
Current, see article configuration, max . 16 A.
'') With center infeed I N : 80 A .
') Only version for TMCP, not possible for TMC .
1)
TMC and TMCP type key
The type key shows the clear structure
of the article .
Screwdriver
SZS O,6 x 3,5
Zack marker strip, 10-section, white
Dimensions
Width / length
[mm]
Height (NS 35/7 .5 / NS 35/15 / NS 32)
[mm]
Technical data in accordance with IEC / DIN VDE
Main contact : Max . load current ! cross section 'mm2 ] [A] / [mm']
Aux. contact : Max . load current / cross section
[A] / [mm2]
Max. cross section with insertion bridge (solid/stranded)
[mm2)
Rated surge voltage / contamination class
[kV] I Surge voltage category / insulating material group
-/Switching capacity
Cycles with 1 x I N (low-induction)
Cycles with 1 x I N (inductive)
Cycles with 2 x I N (inductive)
Connection capacity of main contact
Stranded with ferrule without . with plastic sleeve
[
Connection capacity of auxiliary contact
Stranded with ferrule without . with plastic sleeve
[mm']
Main contact : Two conductors with same cross section
Solid / stranded
[mm2]
Stranded with ferrule without plastic sleeve
[mm~]
Stranded with TWIN ferrule with plastic collar
[mm']
Aux. contact : Two conductors with same cross section
Solid / stranded
[mm']
Stranded with ferrule without plastic sleeve
[mm[']
Stranded with TWIN ferrule with plastic collar
[mm']
Stripping length of main/ auxiliary contact
[mm]
Cylindrical gauge (IEC 60 947-1) main / aux . contact
Main contact : Thread / torque
- / [Nm]
Aux. contact : Thread / torque
- / [Nm]
Insulation material
Inflammability class in ace . with UL 94
Approval data (UL/CUL and CSA)
Nominal voltage / current ' conductor sizes
UUCUL: [V] / [A] / AWG
CSA: [V] / [A] r AWG
ZB 6 (for order data, see page 397)
Type
Main current paths
Characteristic curve
Auxiliary contact versions
Nominal current
TMC
or
TMCP
1 = single position
2 = 2-position
3 = 3-position
F1 = therm . 1 .05-1 .4 IN,
magn . 2-4 I N DC (fast blow),
only for DC applications
M1= therm . 1 .05-1 .4 0.
magn . 6-12 I N AC,
7 .8-15.6 I, DC
(normal blow)
100 0 single position : 1 N/O
contact
200 = single position : 1 N/C
contact
120 0 2-position : 1 N/O contact,
1 N/C contact
122 = 3-position : 1 N/O contact,
2 N/C contacts
300') =1 N/O1 N/C cont. per pos .
0 .2 A
0 .3 A
0 .4 A
0 .5 A
0 .6 A
0 .8 A
1 A
1 .5 A
2A
Example :
TMC
356
2 .5 A
3A
4A
5A
6A
8A
10 A
12 A
16 A
One TMC with 1-pos . main current path, one N/O contact, normal blow characteristic
and a nominal current of 2 A.
1
Phoenix Contact
Ml
50 P)
100
2A
3009338
12 05 05 3
12 .5 / 83.5
96 / 103.5 / 100 .5
1/6
1/2.5
1 .5/1 .5
4/3
M /l
6000
3000
500
0 .25-4/025-2 .5
0 .25 - 2 .5 / 0 .25 - 1 .5
0 .2-1/0 .2-1
025-1
0 .5-2 .5
0 .2 - 0 .75 / 0.2 - 0 .75
0 .25 - 0 .5
0 .5 - 0 .75
12 / 12
A3 /Al
M3 / 0.6 - D .8
M3 10.6 - 0 .8
PA-F
VO
250 (65) / 0.2-16 / 24 - 10 (14)
250 (65) / 0 .2-16 / 28 - 10 (14)
83 5
10
Thermomagnetic
circuit-breaker, TMCP
The TMCP thermomagnetic equipment
circuit-breaker with toggle operation and a
-free mechanism is available in the
.flowing versions:
As a one or multi-position circuitbreaker
For mounting on socket element or
front plate
As fast or normal blow version for
direct current and
As normal blow version for alternating
current.
Each version has integrated signal
contacts .
Drilling diagram for front plate mounting
3-pos.
N
32
2-pos.
1-pos .
;
4I
4
O
I
Or,
0
11,5
L
TMCP. ..
.
Width 12 .5
I
U
[A] [V AC/DC]
11 .5
r
e
Connection data
Main contact
Auxiliary contact
Slip-on connection 6 .3 x 0 .8 mm
250/65
250/65
90°
S 1,5 mm
Thermomagnetic circuit-breaker,
pluggable, one, two or three-position
50
43
Order No .
Type
Description
6
TMCP.. ..
(see type key on the left)
Spring locking, for mechanical locking in the case of overhead
mounting, 1-position
Py.
Pkt.
SPRING-LOCK
0713009
10
1
eI
6x6,8=40,8
TMC and TMCP tripping
characteristics
Normal blow (Ml) : Nominal value 0 .2-6 A
lower tripping limit : 1 .05 I N
upper tripping limit : 1 .4 I,
Dimensions
Width i length
[ mml
[mm]
Height
Technical data in accordance with IEC / DIN VDE
Main contact: Max . load current I cross section [mm-'] [A] / [mm-]
[A] / [mm']
Aux . contact: Max . load current / cross section
Rated surge voltage / contamination class
[kV] /Switching capacity
Up to 5 A nominal current
[AI
[A]
5 A nominal current and higher
Insulation material
Inflammability class in acc. with UL 94
Approval data (UUCUL and CSA)
Nominal voltage 1 current (conductor sizes
UUCUL: [V] / [A] / AWG
GSA : [V] / [A] / AWG
12 .5 / 50
Max . 90
I ) / Slip-on connection DIN 46 244
1 / Slip-on connection DIN 46 244
2.5/2
400
800
PA-F
Vo
250(65)/0.2-16/250(65)/0.2-16/-
I ) Dependent on nominal current.
Normal blow (Ml) : Nominal value 8-16 A
Fast blow (Fl) : Nominal value 0 .2-16 A,
only for DC applications
lower tripping limit : 1 .05 1 .,
upper tripping limit: 1 .4 I .;
lower tripping limit : 1 .051 .,
upper tripping limit : 1 .4 I .,
M
INIM
WIN
0 .001 . . . .
0,8 1
Multiples of I,
Multiples of I N
. ..
2 3 4 6 8 10 20 30 50
70 100
Multiples of I v
Phoenix Contact
357
Socket element for ECP and
TMCP
The TMCP-SOCKET-M socket element
holds the circuit-breaker and can be
snapped onto DIN rails . The
TMCP-CONNECT-LR termination
elements each form the end of a strip of
sockets put together in a row.
The spring-cage connection and the
bridge shaft for potential distribution
facilitate wiring . Generous labeling options
facilitate the allocation of circuit breakers to
the modules.
The circuit-breakers can also be used
without a socket element for mounting
directly on the front plate.
TMCP-SOCKET-M
Width per position 12 .5
(IEC)
rigid
[mm,]
solid
TMCP-CONNECT-LR
flexible
I
U
stranded AWG [A] [V AC/DC]
Main contact
Input
0 .5-6
0 .5-6
20-8 50
250/65
Output
0 .5-4
0 .25-4
20-10
250/65
Aux. contact 12
0 .25-1 .5
0 .25-1 .5
1
26-16
250/65
The nominal current depends on the circuit-breaker used.
Description
Color
Modular socket,
2-position . for holding two circuit-breakers. each with a single
position
Socket termination elements,
pluggable both left and right, contains the connections for querying
a module
Signal bridge,
pluggable, for bridging group signaling when there is a free slot on
the TMCP-SOCKET-M socket
Fixed bridge
pluggable, 500 mm long, can be cut to length, for distribution of the
input potential in the socket
Fixed bridge
pluggable, 500 mm long, can be cut to length, blue insulation, for
distribution of the input potential in the socket
Fixed bridge
pluggable, 500 mm long, can be cut to length, red insulation, for
distribution of the input potential in the socket
Zack marker strip, 10-section
<~Y
White
Dimensions
Width / length
Height (NS 35/7 .5 / NS 35/15)
Technical data in accordance with IEC / DIN VDE
Rated surge voltage contamination class
Main contact
Input: Max . load current / cross section
Output : Max . load current / cross section
Auxiliary contact
Power input (11):
Max_ load current / cross section
Single output (12):
Max . load current cross section
Group outputs (13/14):
Max . load current ! cross section
Stripping length
Main contact
Auxiliary contact 12
Auxiliary contact 11 : 13 : 14
Insulation material
Inflammability class in acc . with UL 94
[mm]
[mm]
Type
Order No .
Pcs.
Pkt.
TMCP-SOCKET-M
09 16 58 9
10
TMCP SB
1A
0916602
6
I,,,, : 50 A
09 16 61 5
20
FBST 500-PLC BU
32 A
29 66 69 2
20
FBST 500-PLC RD
t,, , : 32 A
29 66 78 6
20
FBST 500 TMCP
ZB 6 (for order data, see page 397)
Width 6
(IEC)
[mm2]
Auxiliary contacts
11
13/14
rigid
solid
0 .25-2 .5
0.25-2 .5
flexible
I
U
stranded AWG [A] [V AC/Dq.
0 .25-2.5
0 .25-2.5
10
1
250165
25065
Type
Order No .
Pcs.
Pkt.
TMCP-CONNECT-LR
0916592
3
ZB 6 (for order data, see page 397)
25 (2-position) / 115
110 .5 / 118
6 / 115
[kV]!–
2 .5/2
2.5 / 2
[A] / [mm-]
[A] / [mm 2 [
50/6
25/4
[A] / [mm'-]
[A]![mm-]
10/2 .5
1/1 .5
[A) / [mm]
[mm]
[mm]
[mm)
1 /2 .5
12
9
10
PA-F
VC
PA-F
Vo
Dimensional drawings
115
63
358
Phoenix Contact
24-12
24-12
TCP thermal miniature
circuit-breaker
Nominal currents and internal resistances
The thermal miniature circuit-breaker
can be switched back on again, has a
compact design, and is available in 9 finely
graded steps for nominal currents from 0 .25
to 10 A.
The integrated switching function makes
it possible to switch the circuit-breaker
back on immediately, thus guaranteeing the
availability of the system . The miniature
circuit-breaker can also be used for
switching purposes.
Potential distribution can be
snveniently implemented using bridges.
Time/current characteristic curve
(Total switch-off period for nominal current)
Ambient temperature 23°C
Nominal current [A]
Internal resistance (Y.)
0 .25
0 .5
1 .0
2 .0
3 .0
4 .0
6 .0
8 .0
10.0
14
3 .4
0 .9
0 .25
0 .11
0 .07
0 .05
<- 0 .05
0 .05
c'us
Type
Order No.
Pcs.
Pkt.
TCP 0 .25
TCP 0 .5
TCP 1
TCP 2
TCP 3
TCP 4
TCP 6
TCP 8
TCP 10
0712123
0712152
0712194
07 12 21 7
07 12 23 3
07 12 25 9
07 12 27 5
0712291
07 12 31 4
20
20
20
20
20
20
20
20
20
Black
UK 6-FSI/C
31 18 20 3
50
Black
ST 4-FSI/C
30 36 37 2
50
White
ZBF 5 (for order data, see page 401)
color
Description
Thermal miniature circuit-breaker, can
be plugged into UK 6-FSLIC use terminal
block or ST 4-FSI/C
6
8
10
Fuse terminal block, with screw
connection, for mounting on V or u .
see page 82
Fuse terminal block, with spring-cage
connection . for mounting on u, see
page 191
Zack marker strip, flat, for labeling the
upper marker grooves
Technical data in accordance with IEC / DIN VDE
Nominal voltage
Nominal current
Ambient temperature
Rated surge voltage / contamination class
Surge voltage category / insulating material group
Switching capacity
Cycles with 1 x I 1 (low-induction)
Cycles with 1 x I,, (inductive)
Cycles with 2 x I ., (inductive)
Switching capacity Ic,y
for nominal currents of 0 .25 - 4 A /I 6 - 10 A
Switching capacity (UL 1077)
AC 250 V rr DC 65 V
Insulation material
Inflammability class in acc . with UL 94
5-4A
Nominal
current
[A]
0 .25
0 .5
1
2
3
4
[V AC/DC]
[A]
[" Cl
[kV] / -/-
250 / 65
0 .25 - 10
-20 .. .+60
2 .5/2
III/I
6000
3000
500
[A]
6xle//8xle
[A]
2000//200
PA
VO
ST 4-FSI/C with TCP
UK 6-FSI/C with TCP
64
86 .5
4
4
C
a
0,1 0,8 1
2
3 4 5 6 8 10
20 30 40
Multiples of I„
te:
When mounted in rows, the nominal current of the devices can only
be transmitted at 80% or must be correspondingly
overdimensioned .
Ambient temperature 1C
Temperature factor
-20
0 .76
1
Ambient temperature 'C
Temperature factor
23
1
40
1 .08
-10
0 .84
50
1 .16
a
0
0.92
60
1 .24
When switched off . the maximum constructional height increases
by 3.5 mm .
When switched off . the maximum constructional height increases
by 3.5 mm .
Phoenix Contact
359