Standard Crystal Corporation
9940 E. Baldwin Place, El Monte, CA 91731
Phone (800) 423-4578, (626) 443-2121 Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
About Standard Crystal Corporation
The company has been in business since 1957. It occupies a modern
12,400 sq. ft. Plant (build in 1977) designed expressly for the
manufacture of crystal and oscillator products.
It is located in the city of El Monte which is located in Los Angeles
County. The is located adjacent to Interstate 10, also known as the
San Bernadino Freeway.
In 1993 we added the capability of manufacturing products in China.
This gives us the advantage of both large and small volume production
to support all our customer needs.
The most modern and sophisticated equipment is used to efficiently
and accurately test and manufacture each crystal and hybrid oscillator.
All crystal and oscillator designs have been computerized to minimize
error. Our company also has application assistance and research and
development capabilities available for in-house and customer use.
We are continually improving quality and expanding our product lines
to meet the needs of our customers. Information furnished by Standard
Crystal Corporation is believed to be accurate and reliable. However,
no responsibility is assumed by Standard Crystal Corporation for it
use, nor for any infringements of patents or other rights of third parties
which may result from its use.
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacblell.net
TABLE OF CONTENTS
OSCILLATORS
PAGE
OSCILLATOR QUICK SELECTOR GUIDE.................................. A-1 ~ A-3
HCMOS/TTL 5X7 CERAMIC SMD............................................... O-1
HCMOS/TTL FULL SIZE ............................................................ O-2
HCMOS/TTL HALF SIZE ........................................................... O-3
TTL FULL SIZE ......................................................................... O-4
TTL HALF SIZE ........................................................................ O-5
FAST TTL FULL SIZE ............................................................... O-6
VCXO 5X7 CERAMIC SMD 6 PAD ............................................ O-7
VCXO FULL SIZE ..................................................................... O-8
VCXO HALF SIZE .................................................................... O-9
ECL FULL SIZE ........................................................................ O-10
ECL HALF SIZE ....................................................................... O-11
DTCXO FULL SIZE ................................................................... O-12
TCXO FULL SIZE ..................................................................... O-13
TCXO 7X9 CERAMIC SMD 4 PAD ............................................. O-14
TC & VCXO FULL SIZE SMD .................................................... O-15
VTCXO 9X11 CERAMIC SMD 4 PAD ......................................... O-16
VTCXO 9X11 CERAMIC SMD 6 PAD ......................................... O-17
VTCXO 3X5 CERAMIC SMD 4 PAD .......................................... O-18
VTCXO 7X9 CERAMIC SMD 4 PAD .......................................... O-19
VTCXO 3X6 CERAMIC SMD 4 PAD .......................................... O-20
CRYSTALS
PAGE
CRYSTAL QUICK SELECTOR GUIDE ....................................... A-4 & A-5
HC49U ..................................................................................... C-1
HC49US & HC49USS (LOW PROFILE) ......................................C-2
HC49UP & HC49UPS (LOW PROFILE SMD) ............................. C-3
5X7 CERAMIC SMD 2 PAD & 4 PAD ......................................... C-4
6X3 CERAMIC SMD 2 PAD & 4 PAD ......................................... C-5
5X3 CERAMIC SMD 2 PAD & 4 PAD ......................................... C-6
UM-1 ....................................................................................... C-7
UM-5 ....................................................................................... C-8
UM-4 ....................................................................................... C-9
TO-5 ........................................................................................ C-10
HC51U & HC6U ........................................................................ C-11
3X9 CYLINDRICAL ................................................................... C-12
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
STANDARD CRYSTAL CORP.
HCMOS
OSCILLATOR QUICK SELECTOR GUIDE
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Pin #1 & Symmetry
Frequency
5 x 7.5 x 1.6 Max.
HCMOS
/TTL
5x7mm
SMD
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
A=Pin #1 Enable Hi
D=45/55%
Symmetry
(MHz)
Part Number
CH
5
1
A
0D
AD
40M00000
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Options
Frequency
20.8 x 13.2 x 5.1
HCMOS
/TTL
Full Size
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
A=Pin #1 Enable Hi
D=45/55%
Symmetry
(MHz)
0.197 x 0.29 x 0.07
page O-1
HCMOS
0.82 x 0.52 x 0.20
page O-2
Part Number
CH
1
1
A
0D
AD
40M00000
HCMOS
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Options
Frequency
20.8 x 13.2 x 5.1
HCMOS
/TTL
Full Size
GullWing
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
A=Pin #1 Enable Hi
D=45/55%
Symmetry
(MHz)
0.82 x 0.52 x 0.20
page O-2
Part Number
CH
3
1
A
0D
AD
40M00000
HCMOS
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Options
Frequency
13.2 x 13.4 x 5.08
HCMOS
/TTL
Half Size
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
A=Pin #1 Enable Hi
D=45/55%
Symmetry
(MHz)
0.52 x 0.52 x 0.20
page O-3
Part Number
CH
2
1
A
0D
AD
40M00000
HCMOS
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Options
Frequency
13.2 x 13.4 x 5.08
HCMOS
/TTL
Half Size
GullWing
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
A=Pin #1 Enable Hi
D=45/55%
Symmetry
(MHz)
0.52 x 0.52 x 0.20
page O-3
Part Number
CH
4
1
A
0D
AD
40M00000
TTL
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Options
Frequency
20.8 x 13.2 x 5.1
TTL
Full Size
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
A=Pin #1 Enable Hi
D=45/55%
Symmetry
(MHz)
0.82 x 0.52 x 0.20
page O-4
Part Number
T
1
1
A
0D
AD
40M00000
TTL
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Options
Frequency
20.8 x 13.2 x 5.1
TTL
Full Size
GullWing
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
A=Pin #1 Enable Hi
D=45/55%
Symmetry
(MHz)
0.82 x 0.52 x 0.20
page O-4
Part Number
T
3
1
A
0D
AD
40M00000
TTL
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Options
Frequency
13.2 x 13.4 x 5.08
TTL
Half Size
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
A=Pin #1 Enable Hi
D=45/55%
Symmetry
(MHz)
Part Number
T
2
1
A
0D
AD
40M00000
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Options
Frequency
13.2 x 13.4 x 5.08
TTL
Half Size
GullWing
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
A=Pin #1 Enable Hi
D=45/55%
Symmetry
(MHz)
T
4
1
A
0D
AD
40M00000
0.52 x 0.52 x 0.20
page O-5
TTL
0.52 x 0.52 x 0.20
page O-5
Part Number
A-1
STANDARD CRYSTAL CORP.
FAST TTL
OSCILLATOR QUICK SELECTOR GUIDE
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Options
Frequency
20.8 x 13.2 x 5.1
FAST
TTL
Full Size
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
A=Pin #1 Enable Hi
D=45/55%
Symmetry
(MHz)
0.82 x 0.52 x 0.20
page O-6
Part Number
TF
1
1
A
0D
AD
40M00000
FAST TTL
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Options
Frequency
20.8 x 13.2 x 5.1
FAST
TTL
Full Size
GullWing
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
A=Pin #1 Enable Hi
D=45/55%
Symmetry
(MHz)
3
1
A
0D
AD
40M00000
0.82 x 0.52 x 0.20
page O-6
Part Number
TF
VCXO
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Frequency
Max. Pullability
5.2 x 7.5 x 1.8 Max.
VCXO
5x7
SMD
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
(MHz)
A=±100ppm Max.
B=±50ppm Max.
0.29 x 0.20 x 0.07
page O-7
Part Number
V
5
1
A
0D
40M00000
A
VCXO
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Frequency
Max. Pullability
20.8 x 13.2 x 5.1
VCXO
Full Size
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
(MHz)
A=±100ppm Max.
B=±50ppm Max.
0.82 x 0.52 x 0.20
page O-8
Part Number
V
1
1
A
0D
40M00000
A
VCXO
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Frequency
Max. Pullability
20.8 x 13.2 x 5.1
VCXO
Full Size
GullWing
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
(MHz)
A=±100ppm Max.
B=±50ppm Max.
0.82 x 0.52 x 0.20
page O-8
Part Number
V
3
1
A
0D
40M00000
A
VCXO
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Frequency
Max. Pullability
20.8 x 13.2 x 5.1
VCXO
Half Size
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
(MHz)
A=±100ppm Max.
B=±50ppm Max.
0.82 x 0.52 x 0.20
page O-9
Part Number
V
2
1
A
0D
40M00000
A
VCXO
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Frequency
Max. Pullability
13.2 x 13.4 x 5.08
VCXO
Half Size
GullWing
1= 5V
3= 3.3V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
(MHz)
A=±100ppm Max.
B=±50ppm Max.
0.52 x 0.52 x 0.20
page O-9
Part Number
V
4
1
A
0D
40M00000
A
ECL
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Frequency
Pin Configurations
20.8 x 13.2 x 5.1
ECL
Full Size
1= 5V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
(MHz)
please see page 10
0.82 x 0.52 x 0.20
page O-10
Part Number
E
1
1
A
0D
40M00000
AC
ECL
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Tolerance
Frequency
Pin Configurations
20.8 x 13.2 x 5.1
ECL
Full Size
GullWing
1= 5V
A= 0E to 70EC
B= -40E to 85EC
0D= ±100ppm
1D= ±50ppm
(MHz)
please see page 10
E
3
1
A
0D
40M00000
AC
0.82 x 0.52 x 0.20
page O-10
Part Number
A-2
STANDARD CRYSTAL CORP.
DTCXO
OSCILLATOR QUICK ELECTOR GUIDE
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Output Wave
Frequency
Freq. Stability
15 x 25 x 14
DTCXO
Thru-Hole
5V
A= 0E to 70EC
B= -20E to 70EC
H=CMOS & TTL
S=Sine Wave
(MHz)
±1.0~±0.3ppm
A
H
12M288000
-1.0
0.59 x 0.98 x 0.55
page O-12
Part Number
DTC
1525T
DTCXO
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Output Wave
Frequency
Freq. Stability
12.6 x 18.6 x 10
TCXO
Thru-Hole
5V
A= 0E to 60EC
B= -20E to 70EC
H=CMOS & TTL
S=Sine Wave
(MHz)
±10.0~±0.3ppm
A
H
12M288000
-10.0
0.49 x 0.73 x 0.40
page O-13
Part Number
TC
1218T
TCXO SMD
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Output Load
Frequency
Freq. Stability
7.0 x 9.0 x 2.0
TCXO
7x9 SMD
4 pad
3V
-20E to 75EC
[10k Ohms/10pF]±10%
(MHz)
see Page O-14
79-4-
0.28 x 0.36 x 0.08
page O-14
Part Number
TC
12M288000
TC & VCXO
Dimensions mm/inch
Family/ Package
Freq. Stability
Temp. Range
Output Load
Freq. Deviation
Frequency
7.62 x 18.3 x 4.5
See Table
Page O-15
(2 digit code)
See Table
Page O-15
(1 letter code)
C= CMOS/ TTL
Compatible
S= Clipped Sinewave
Blank= TCXO
5 = ±5ppm
10= ±10ppm
(Mhz)
0.3 x 0.72 x 0.18
TC & VCXO
14 Pin SMD
5Vdc
page O-15
Part Number
TVCFS
25
C
S
10
12M28800
VTCXO SMD
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Output Load
Frequency
Freq. Stability
9.6 x 11.4 x 2.3
VTCXO
9x11 SMD
4 pad
3V
-30E to 75EC
10k Ohms/10pF
(MHz)
see Page O-16
Part Number
VTC
911-4-
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Output Load
Frequency
Freq. Stability
9.6 x 11.4 x 2.3
VTCXO
9x11 SMD
6 pad
3V
-30E to 75EC
10k Ohms/10pF
(MHz)
see Page O-17
0.38 x 0.45 x 0.09
page O-16
VTCXO SMD
12M288000
0.38 x 0.45 x 0.09
page O-17
Part Number
VTC
911-6-
12M288000
VTCXO SMD
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Output Load
Frequency
Freq. Stability
3.2 x 5.0 x 1.5
VTCXO
3x5 SMD
4 pad
3V
- 20E to 75EC
[10k Ohms/10pF]±10%
(MHz)
see Page O-18
0.13 x 0.20 x 0.06
page O-18
Part Number
VTC
35-4-
12M288000
VTCXO SMD
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Freq. Stability
Output Load
Frequency
7.0 x 9.0 x 2.0
VTCXO
7x9 SMD
4 pad
3V
- 20E to 75EC
2.5= ±2.5ppm
5 = ±5ppm
[10k Ohms/10pF]±10%
(MHz)
Part Number
VTC
79-
Dimensions mm/inch
Family
Package
Voltage
Temp. Range
Output Load
Frequency
Freq. Stability
3.5 x 6.0 x 1.7
VTCXO
3x6 SMD
4 pad
3V
- 30E to 80EC
10pF/ 10k Ohms
(MHz)
±2.5ppm
see Page O-20
VTC
36-4-
0.28 x 0.35 x 0.08
page O-19
VTCXO SMD
5-
12M288000
0.14 x 0.24 x 0.07
page O-20
Part Number
12M288000
A-3
OSCILLATORS
ENVIRONMENTAL SPECIFICATIONS
TEMPERATURE CYCLE:
±50PPM Max. 0 to 120EC, 3 Cycles, 2 Hrx. Max. each, 25 ±2EC ref.
SHOCK:
100G’S 0.10 millisec, ½ sinewave; 3 shocks each plane.
VIBRATION:
10Hz to 55Hz, 0.060" D.A., 55Hz to 2000Hz
35G’S Duration time @12 Hours.
HUMIDITY:
95% Relative humidity @ +85EC, 250 Hours.
MECHANICAL:
Hermetically sealed package.
BEND TEST:
Pins will withstand maximum bend of 90E reference to base for 2 bends.
MARKING INK:
Epoxy, heat cured.
SOLVENT RESISTANCE: Isopropyl alcohol, Trichloromethane, Freon, TMC.
No marking or seal destruction. Dipped 1 minute @ +25EC ±5EC in Solvent.
SOLDERABILITY:
Each wire lead terminal shall be solderable when tested as specified in Method
208 of MIL-STD-202.
NOTE: (1) Unit can be cleaned by only type of the solvents listed.
NOTE: (2) Ultrasonic degreaser no to be used.
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
OSCILLATOR REQUEST FOR QUOTE SHEET
Your Company Name: _________________________________________________
Your Name: _________________________, Phone :_________________________
Fax: _______________________________, E-Mail: __________________________
Address: ____________________________________________________________
Quantity: ___________________________, Delivery: _________________________
Part Number: ______________________ Example: CH11A0DA20M000000
Family: ___________________________ (TTL, HCMOS, VCXO, Etc.)
Frequency: ________________________ MHz or KHz
Supply Voltage (Vdd): _______________ (5V, 3.3V)
Frequency Tolerance: ±______________ PPM @25EC
Frequency Stability: ±______________ PPM @ Operating Temperature Range
Operating Temperature Range: from_________EC to _________EC
Package Type: _____________________ (Full Size, Half Size, 5x7 SMD, Etc.)
Tri State/ Enable Hi: _________________
Symmetry: _________________________ (40/60%, 45/55% Duty Cycle)
Pin Connections (ECL Only): ___________ (AA, AC, ACE, Etc.)
Frequency Pullability (VCXO Only): ______ PPM Min.
Special Instructions: __________________________________________________
____________________________________________________________________
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
HCMOS/TTL
MINIATURE SMD
OSCILLATOR 5x7mm SURFACE MOUNT
SPECIFICATION
Frequency Range
1.544 MHz to 125.0 MHz
Storage Temperature Range
-55EC to 125EC
Operating Temperature Range
0EC to 70EC or -40EC to 85EC
Input Voltage
5Vdc ± 0.5V
Max. Input Current
5 - 80 mA
Logic “1" / “0"
90% Vdd Min. / 10% Vdd Max.
Output Symmetry
45 / 55% @ ½ Vp-p
Output Rise / Fall Time
100Sec. Max.
Output Load
10TTL Gates/ 50pF HCMOS
Max.
Options on Pin 1
“1" = Enable, “0" = Disable
3.3Vdc ± 0.3V
10LS TTL/ 15pF
N/C = No Connection
Dimensions in mm
Pin Connections
#1 Enable Hi
#3 Output
Note: External 0.01F
FF capacitor
required between pins 4 and 2
#2 Ground
#4 VDD
HCMOS 5x7 SMD Part Number Break Down
CH 5 1 A 0 D A 20M000000 (Frequency)
Supply Voltage
1= 5Vdc
3= 3.3Vdc
Temp. Range
A= 0 to 70EC
B= -40 to 85EC
Tolerance/ Stability
0= ±100 PPM
1= ±50 PPM
4= ±25 PPM
Tri State Enable Hi
(Standard)
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-1
HCMOS/ TTL
FULL SIZE
OSCILLATOR THRU HOLE AND GULL WING SMD
FEATURES
!
CMOS and TTL compatible
!
Tri-State option available
!
Selection of thru-hole or gull wing
!
14 pin dip
SPECIFICATIONS
Frequency Range
1MHz to 150MHz
Storage Temperature Range
-55EC to 125EC
Operating Temperature Range
0EC to 70EC or -40EC to 85EC
Input Voltage
5V±0.5V or 3.3V 0.3V
Max. Input Current
5 - 80 mA
Logic “1" / “0"
90% Vdd Min. / 10% Vdd Max.
Output Symmetry
60 / 40% @ ½ Vp-p
Output Rise / Fall Time
100Sec. Max.
Output Load
CMOS C = 15pF or 10TTL Gates
Options on Pin 1
“1" = Enable, “0" = Disable
N/C = No Connection
Dimensions in inches
FULL SIZE
FULL SIZE GULL WING
HCMOS Full Size Thur Hole Part Number Break Down
CH 1 1 A 0 D A - Frequency
Package
1= Full Size
3= Full Size
Gull Wing
Supply Voltage
1= 5Vdc
3= 3.3Vdc
Temp. Range
A= 0 to 70EC
B= -40 to 85EC
Tolerance/ Stability
0= ±100 PPM
1= ±50 PPM
4= ±25 PPM
Options
Blank= Standard
A= TS Enable Hi
D= Tight Symmetry
45/55%
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-2
HCMOS/ TTL
HALF SIZE
OSCILLATOR THRU HOLE AND GULL WING SMD
FEATURES
!
CMOS and TTL compatible
!
Tri-State option available
!
Selection of thru-hole or gull wing
!
8 pin dip
SPECIFICATIONS
Frequency Range
1MHz to 150MHz
Storage Temperature Range
-55EC to 125EC
Operating Temperature Range
0EC to 70EC or -40EC to 85EC
Input Voltage
5V±0.5V or 3.3V±0.3V
Max. Input Current
5 - 80 mA
Logic “1" / “0"
90% Vdd Min. / 10% Vdd Max.
Output Symmetry
60 / 40% @ ½ Vp-p
Output Rise / Fall Time
100Sec. Max.
Output Load
CMOS C = 15pF or 10TTL Gates
Options on Pin 1
“1" = Enable, “0" = Disable
N/C = No Connection
Dimensions in inches
HALF SIZE
HALF SIZE GULL WING
HCMOS Half Size Thur Hole Part Number Break Down
CH 2 1 A 0 D A - Frequency
Package
2= Halfl Size
4= Half Size
Gull Wing
Supply Voltage
1= 5Vdc
3= 3.3Vdc
Temp. Range
A= 0 to 70EC
B= -40 to 85EC
Tolerance/ Stability
0= ±100 PPM
1= ±50 PPM
4= ±25 PPM
Options
Blank= Standard
A= TS Enable Hi
D= Tight Symmetry
45/55%
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-3
TTL
FULL SIZE
OSCILLATOR THRU HOLE AND GULL WING SMD
FEATURES
!
Drive 1 to 10 TTL loads.
!
Tri-State option available
!
Selection of thru-hole or gull wing
!
14 pin dip
SPECIFICATIONS
Frequency Range
25MHz to 65MHz
Storage Temperature Range
-55EC to 125EC
Operating Temperature Range
0EC to 70EC or -40EC to 85EC
Input Voltage
5V±0.5V or 3.3V±0.3V
Max. Input Current
90 mA
“1" / “0" Level
0.4V Max. / 2.4V Min.
Output Symmetry
60 / 40% @ ½ Vp-p
Output Rise / Fall Time
150Sec. Max.
Output Load
1 to 10 TTL Loads
Options on Pin 1
“1" = Enable, “0" = Disable
N/C = No Connection
Dimensions in inches
FULL SIZE
FULL SIZE GULL WING
TTL Full Size Thur Hole Part Number Break Down
T 1 1 A 0 D A - Frequency
Package
1= Fulll Size
3= Full Size
Gull Wing
Supply Voltage
1= 5Vdc
3= 3.3Vdc
Temp. Range
A= 0 to 70EC
B= -40 to 85EC
Tolerance/ Stability
0= ±100 PPM
1= ±50 PPM
4= ±25 PPM
Options
Blank= Standard
A= TS Enable Hi
D= Tight Symmetry
45/55%
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-4
TTL
HALF SIZE
OSCILLATOR THRU HOLE AND GULL WING SMD
FEATURES
!
Drive 1 to 10 TTL loads
!
Tri-State option available
!
Selection of thru-hole or gull wing
!
8 pin dip
SPECIFICATIONS
Frequency Range
25MHz to 65MHz
Storage Temperature Range
-55EC to 125EC
Operating Temperature Range
0EC to 70EC or -40EC to 85EC
Input Voltage
5V±0.5V or 3.3V±0.3V
Max. Input Current
90 mA
“1" / “0" Level
0.4V Max. / 2.4V Min.
Output Symmetry
60 / 40% @ ½ Vp-p
Output Rise / Fall Time
150Sec. Max.
Output Load
1 to 10 TTL Loads
Options on Pin 1
“1" = Enable, “0" = Disable
N/C = No Connection
Dimensions in inches
HALF SIZE
HALF SIZE GULL
WING
TTL Half Size Thur Hole Part Number Break Down
T 2 1 A 0 D A - Frequency
Package
2= Halfl Size
4= Half Size
Gull Wing
Supply Voltage
1= 5Vdc
3= 3.3Vdc
Temp. Range
A= 0 to 70EC
B= -40 to 85EC
Tolerance/ Stability
0= ±100 PPM
1= ±50 PPM
4= ±25 PPM
Options
Blank= Standard
A= TS Enable Hi
D= Tight Symmetry
45/55%
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-5
FAST TTL
FULL SIZE
OSCILLATOR THRU HOLE AND GULL WING SMD
FEATURES
!
Drive 1 to 10 LS TTL loads.
!
Selection of thru-hole or gull wing
!
14 pin dip
SPECIFICATIONS
Frequency Range
60MHz to 110MHz
Storage Temperature Range
-55EC to 125EC
Operating Temperature Range
0EC to 70EC or -40EC to 85EC
Input Voltage
5V±0.5V
Max. Input Current
80 mA
“1" / “0" Level
0.5V Max. / 2.4V Min.
Output Symmetry
60 / 40% @ ½ Vp-p
Output Rise / Fall Time
70Sec. Max.
Output Load
1 to 10 LS TTL Loads
Options on Pin 1
“1" = Enable, “0" = Disable
N/C = No Connection
Dimensions in inches
FULL SIZE
FULL SIZE GULL WING
FAST TTL Full Size Thur Hole Part Number Break Down
TF 1 1 A 0 D A - Frequency
Package
1= Fulll Size
3= Full Size
Gull Wing
Supply Voltage
1= 5Vdc
Temp. Range
A= 0 to 70EC
B= -40 to 85EC
Tolerance/ Stability
0= ±100 PPM
1= ±50 PPM
4= ±25 PPM
Options
Blank= Standard
D= Tight Symmetry
45/55 %
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-6
VCXO 5x7 Surface Mount
VOLTAGE CONTROLLED CRYSTAL OSCILLATORS
SPECIFICATION
Frequency Range
8MHz to 36MHz
Storage Temperature Range
-50EC to 125EC
Operating Temperature Range
0EC to 70EC or -40EC to 85EC
Input Voltage
+5V ± 0.5V
+3.3V ± 0.3V
Frequency Control
+0.5V to +4.5V
+0.3V to +3.0V
Frequency Deviation
± 80ppm Min.
± 100ppm Min.
Control Voltage
2.5 ± 2.0V
1.65 ± 1.5V
Input Current
30mA Max.
20mA Max.
Output Rise / Fall Time, Output Symmetry
80 Sec. Max., 40 / 60%
Output Load
15pF
Dimensions in mm
Recommended Pad Layout
VCXO 5x7 SMD Part Number Break Down
V 5 1 A 0D - 20M000000 - A
Holder Size
Supply Voltage
Temp. Range
Tolerence/ Stability
Pullability
5= 5x7 SMD
1= 5Vdc
3= 3.3Vdc
A= 0 to 70EC
B= -40 to 85EC
0D= ±100 PPM
1D= ±50 PPM
A= 200 PPM Max.
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-7
VCXO FULL SIZE
VOLTAGE CONTROLLED CRYSTAL OSCILLATORS
SPECIFICATION
Frequency Range
1MHz to 80MHz
Storage Temperature Range
-55EC to 125EC
Operating Temperature Range
0EC to 70EC or -40EC to 85EC
Input Voltage
+5V ± 0.5V or +3.3V ± 0.3V
Frequency Control
+0.5V to +4.5V
Frequency Deviation Sensitivity
60 PPM / Volt at V control = +2V to +3V
Frequency Nominal Sensitivity
V control = +2.5V ± 0.05V
Output Symmetry
40 / 60% @ 1.4V Level
Output Rise / Fall Time
150Sec. (0.4 to 2.4 Levels)
Output Load
10 TTL, CMOS Compatible
Dimensions in inches
FULL SIZE
FULL SIZE GULL WING
VCXO Full Size Part Number Break Down
V 1 1 A 0D - 20M000000 - A
Holder Size
Supply Voltage
Temp. Range
Tolerence/ Stability
Pullability
1= Full Size
3= Full Size
Gull Wing
1= 5Vdc
3= 3.3Vdc
A= 0 to 70EC
B= -40 to 85EC
0D= ±100 PPM
1D= ±50 PPM
A= 200 PPM Max.
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-8
VCXO HALF SIZE
VOLTAGE CONTROLLED CRYSTAL OSCILLATORS
SPECIFICATION
Frequency Range
1MHz to 80MHz
Storage Temperature Range
-55EC to 125EC
Operating Temperature Range
0EC to 70EC or -40EC to 85EC
Input Voltage
+5V ± 0.5V or +3.3V ± 0.3V
Frequency Control
+0.5V to +4.5V
Frequency Deviation Sensitivity
60 PPM / Volt at V control = +2V to +3V
Frequency Nominal Sensitivity
V control = +2.5V ± 0.05V
Output Symmetry
40 / 60% @ 1.4V Level
Output Rise / Fall Time
150Sec. (0.4 to 2.4 Levels)
Output Load
10 TTL, CMOS Compatible
Dimensions in inches
HALF SIZE
HALF SIZE GULL WING
VCXO Half Size Part Number Break Down
V 2 1 A 0D - 20M000000 - A
Holder Size
Supply Voltage
Temp. Range
Tolerence/ Stability
Pullability
2= Half Size
4= Half Size
Gull Wing
1= 5Vdc
3= 3.3Vdc
A= 0 to 70EC
B= -40 to 85EC
0D= ±100 PPM
1D= ±50 PPM
A= 200 PPM Max.
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-9
ECL Series FULL SIZE
DESCRIPTION
ECL (Emitter Coupled Logic) clock oscillators provide MECL 10K and 10HH compatible signals for applications such
as high speed computing, graphic workstations, digital communications and A/D conversion.
FEATURES
!
10K or 10Kh output compatible, +5.2V or -5.2V supply voltage
!
Low output impedance
!
Excellent noise margins
!
Full size metal package
SPECIFICATIONS
ECL Full Size Pin Configurations
Frequency Range
20MHz to 140MHz
PIN
AA
AM
AE
Frequency Stability
±100PPM, ±50PPM, ±25PPM
1
Case GND
NC
Enable /Disable
Operating Temperature
Range
0EC to 70EC or -40EC to 85EC
7
-5.2V
Case GND
-5.2V
8
Output
Output
Output
Storage Temperature Range
-55EC to 125EC
14
GND
-5.2V
Case GND
Input Voltage
+ or -5.2V ± 0.5V
PIN
AB
AC
AAC
Input Current
140mA Max.
1
NC
NC
Comp Output
Output Symmetry
40 / 60% @ 1.4V Level
7
-5.2V
Case GND
-5.2V
Output Rise / Fall Time
<40Sec measured between 20 to 80%
voltage level
8
Output
Output
Output
“0" / “1" Levels
-1.6V Max. / -1.0V Min.
14
Case GND
+5.2V
Case GND
Output Load
Typical 50 Ohms to -2.0V DC
PIN
ACE
AMC
ACC
1
Enable/ Disable
Comp Output
Comp Output
7
Case GND
Case GND
Case GND
8
Output
Output
Output
14
+5.2V
-5.2V
+5.2V
Dimensions
(Inches)
ECL Part Number Break Down
E 1 1 A 0 D - 20M000000 - AC
Holder
1= Full Size
3= Full Size
Gull Wing
Supply Voltage
1= + or -5.2V ± 0.5V
Temp. Range
A= 0 to 70EC
B= -40 to 85EC
Tolerence/ Stability
0= ±100 PPM
1= ±50 PPM
Pin Configuration
(See Table )
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-10
ECL Series HALF SIZE
DESCRIPTION
ECL (Emitter Coupled Logic) clock oscillators provide MECL 10K and 10HH compatible signals for applications such
as high speed computing, graphic workstations, digital communications and A/D conversion.
FEATURES
!
10K or 10Kh output compatible, +5.2V or -5.2V supply voltage
!
Low output impedance
!
Excellent noise margins
!
Half size metal package
SPECIFICATIONS
ECL Half Size Pin Configurations
Frequency Range
20MHz to 140MHz
PIN
AA
AM
AE
Frequency Stability
±100PPM, ±50PPM, ±25PPM
1
Case GND
NC
Enable /Disable
Operating Temperature
Range
0EC to 70EC or -40EC to 85EC
4
-5.2V
Case GND
-5.2V
5
Output
Output
Output
Storage Temperature Range
-55EC to 125EC
8
GND
-5.2V
Case GND
Input Voltage
+ or -5.2V ± 0.5V
PIN
AB
AC
AAC
Input Current
140mA Max.
1
NC
NC
Comp Output
Output Symmetry
40 / 60% @ 1.4V Level
4
-5.2V
Case GND
-5.2V
Output Rise / Fall Time
<40Sec measured between 20 to 80%
voltage level
5
Output
Output
Output
“0" / “1" Levels
-1.6V Max. / -1.0V Min.
8
Case GND
+5.2V
Case GND
Output Load
Typical 50 Ohms to -2.0V DC
PIN
ACE
AMC
ACC
1
Enable/ Disable
Comp Output
Comp Output
4
Case GND
Case GND
Case GND
5
Output
Output
Output
8
+5.2V
-5.2V
+5.2V
Dimensions
(Inches)
ECL Part Number Break Down
E 2 1 A 0 D - 20M000000 - AC
Holder
1= Half Size
3= Half Size
Gull Wing
Supply Voltage
1= + or -5.2V ± 0.5V
Temp. Range
A= 0 to 70EC
B= -40 to 85EC
Tolerence/ Stability
0= ±100 PPM
1= ±50 PPM
Pin Configuration
(See Table)
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-11
DTCXO THRU-HOLE
Digital Temperature Compensated Crystal Oscillators
SPECIFICATION
Frequency Range
3.5MHz to 25MHz
Input Voltage
5.0±10%Vdc
Output Voltage
>500Mv(rms) CMOS/ 5 TTL
Frequency Stability
±0.3ppm ~ ±1ppm
Temperature Range
0~+70EC
Output Load
270 Ohms / 100pF
1K Ohms or 5TTL +15pF
Output Wave
Sine
CMOS & TTL
Harmonics & Subharmonics
<-30 db
Input Current
<15mA
Calibration Range
>±5ppm
-20~+75EC
-40~+75EC
Dimensions in mm
DTCXO Thru-Hole Part Number
DTC1525T- A H- 12M800000 (Frequency)
A= 0 to 70EC
B= -20 to 70EC
C= -40 to 75EC
D= -55 to 90EC
H= CMOS & TTL
S= Sine Wave
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-12
-55~+90EC
TCXO THRU-HOLE
Temperature Compensated Crystal Oscillators
SPECIFICATION
Frequency Range
1MHz to 35MHz
Input Voltage
5.0±10%Vdc
Output Voltage
>500Mv(rms) CMOS 5 TTL
Frequency Stability
±1ppm ~ ±10ppm
Temperature Range
0~+60EC
Output Load
270 Ohms/ 100pF
1K Ohms or 5TTL +15pF
Output Wave
Sine
CMOS & TTL
Harmonics & Subharmonics
<-30 db
Input Current
<10mA
Calibration Range
>±5ppm
-20~+70EC
-40~+75EC
Dimensions in mm
TCXO Thru-Hole Part Number
TC1218T-A H- 12M800000 (Frequency)
A= 0 to 60EC
B= -20 to 70EC
C= -40 to 75EC
H= CMOS & TTL
S= Sine Wave
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-13
TCXO 7x9 SMD 4 PAD
Temperature Compensated Crystal Oscillators
SPECIFICATION
Frequency Range (MHz)
12.6, 12.8, 13.0, 14.4, 14.85, 15.36, 16.8, 19.2,
19.44, 19.68, 19.8
Input Voltage
3.0±5%Vdc
Max. Input Current
2mA @ 3Vdc, 25EC
Storage Temperature Range
-40 ~ 85EC
Output Load
[10k Ohms/10pF]±10%
Frequency Shift
vs. Temperature
±2.5ppm (-20~+75EC)
vs. Supply Voltage
±0.3ppm (3V±5%)
vs. Load
±0.2ppm ([10k Ohms/10pF]±10%)
At Shipping
±2.5ppm @ 25±2EC)
vs. Aging
±1ppm per year
Voltage Controlled Range
+9~+15ppm (1.5V±1V)
Dimensions in mm
TCXO 7x9 SMD 4 PAD Part Number
TC79-4- 12M800000 (Frequency)
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-14
TCXO & VTCXO
14 Pin Surface Mount
Temperature Compensated Crystal Oscillators Or With Voltage Control
SPECIFICATION
Output
TTL/HCMOS
Clipped Sinewave
Frequency Range
1.0 MHz to 35 MHz
9.6 MHz to 35 MHz
Frequency Stability
Temperature
See Table
Aging
±1.0ppm/year (25EC)
Supply Volt Change
±0.5ppm/(+5.0V ±5%)
Load
±0.3ppm
Input Voltage
+5.0V ±5%
Max. Input Current
20mA
Storage Temperature Range
-40 ~ 85EC
Output
3mA
Max.. Load
10TTL or 15pF HCMOS
20K Ohms/ 5pF
Level High Min.
TTL: 2.4Vdc, CMOS: Vdd-0.5 Vdc
1.0 Vp-p Min.
Level Low Max.
TTL: 0.4Vdc, CMOS: 0.5Vdc
Frequency Tuning
±3.0ppm Min.
Control Voltage
2.5Vdc ± 2.0Vdc Positive Transfer Characteristic
Rise / Fall Time Max.
10n Sec.
-
Duty Cycle Max.
50 ± 10%
-
Operation
Temperature
Frequency Stibility (±PPM) *Denotes Availablity
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Range
Code
15
20
25
30
35
40
45
50
0~50EC
A
**
**
**
**
**
**
**
**
-10~60EC
B
**
**
**
**
**
**
**
**
-10~70EC
C
**
**
**
**
**
**
**
**
-20~70EC
D
**
**
**
**
**
**
**
**
-30~60EC
E
**
**
**
**
**
**
**
-30~70EC
F
**
**
**
**
**
**
**
-30~70EC
G
**
**
**
**
**
**
-40~80EC
H
**
**
**
**
**
TCXO & VTCXO Full Size Surface Mount Part
TVCFS- 15 A T 5 -12M28800 (Frequency)
Frequency Stability
Two Digit Code
(See Table)
Operating Temperature
1 Letter Code
(See Table)
Output
T= TTL
M= CMOS
C= CMOS/ TTL Compatible
S= Clipped Sinewave
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-15
Frequency Deviation
Blank= Pin #1 Open (TCXO)
5
= ±5ppm Min.
10 = ±10ppm Min.
VTCXO CLIPPED SINE WAVE SMD 4 PAD
Temperature Compensated Crystal Oscillators With Voltage Control
SPECIFICATION
Frequency Range
Frequency Stability
12.00 MHz to 19.200 MHz
Temperature
±2.5ppm/-30EC to 75EC
Aging
±1.0ppm/year (25EC)
Supply Volt Change
±2.5ppm/(+3.0V ±5%)
Input Voltage
3.0Vdc
Max. Current Consumption
2mA
Storage Temperature Range
-40 ~ 85EC
Output
Load
10k Ohms/10pF
Voltage
1.0V p-p Min.
Waveform
Clipped Sine Wave
Frequency Tuning
Voltage Control
Function
±3.0ppm Min.
Frequency Tuning Range
±4.0ppm Min.
Control Voltage
+1.5V±1.0Vdc
Dimensions in mm
VTCXO 9x11 SMD 4 PAD Part Number
VTC911-4- 12M800000 (Frequency)
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-16
VTCXO CLIPPED SINE WAVE SMD 6 PAD
Temperature Compensated Crystal Oscillators With Voltage Control
SPECIFICATION
Frequency Range
Frequency Stability
12.00 MHz to 19.200 MHz
Temperature
±2.5ppm/-30EC to 75EC
Aging
±1.0ppm/year (25EC)
Supply Volt Change
±2.5ppm/(+3.0V ±5%)
Input Voltage
3.0Vdc
Max. Current Consumption
2mA
Storage Temperature Range
-40 ~ 85EC
Output
Load
10k Ohms/10pF
Voltage
1.0V p-p Min.
Waveform
Clipped Sine Wave
Frequency Tuning
Voltage Control
Function
±3.0ppm Min.
Frequency Tuning Range
±4.0ppm Min.
Control Voltage
+1.5V±1.0Vdc
Dimensions in mm
VTCXO 9x11 SMD 6 PAD Part Number
VTC911-6- 12M800000 (Frequency)
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-17
VTCXO 3.2x5 SMD 4 PAD
Temperature Compensated Crystal Oscillators With Voltage Control
SPECIFICATION
Frequency Range (MHz)
12.6, 12.8, 13.0, 14.4, 14.85, 16.8, 19.2, 19.44,
19.68, 19.8
Input Voltage
3.0±5%Vdc
Max. Input Current
2mA @ 3Vdc, 25EC
Storage Temperature Range
-40 ~ 85EC
Load
[10k Ohms/10pF]±10%
Frequency Shift
vs. Temperature
±2.5ppm (-20~+75EC)
vs. Supply Voltage
±0.2ppm (3V±5%)
vs. Load
±0.2ppm ([10k Ohms/10pF]±10%)
At Shipping
±0.5ppm @ 25±2EC)
vs. Aging
±1ppm per year
Output Level
0.8 Min.
Voltage Controlled Range
+5~+15ppm (1.5V±1V)
Dimensions in mm
VTCXO 3.2x5 SMD 4 PAD Part Number
VTC35-4- 12M800000 (Frequency)
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-18
VTCXO 7x9 SMD 4 PAD
Temperature Compensated Crystal Oscillators With Voltage Control
SPECIFICATION
Frequency Range (MHz)
12.6, 12.8, 13.0, 14.4, 16.8, 19.2, 19.68
Input Voltage
3.0±5%Vdc
Output Voltage
+1Vpp Min.
Frequency Stability/ Temperature
±2.5ppm/ -30~+80EC
Power Source Variation
±0.3ppm Max./ +3V±5%
Output Load
10pF/ 10k Ohms
Power Consumption
1.5mA Max. (12.6 ~ 13.0MHz)
±5ppm/ -30~+80EC
2.0mA Max. (14.4 ~ 19.68MHz)
AFC Control Voltage
+1.5V±1.0V
Frequency Range Controlled by AFC
±5ppm~±12ppm Max.
Aging
±1ppm per year
Higher Harmonic
-5dBm Max.
Dimensions in mm
VTCXO 7x9 SMD 4 PAD Part Number
2.5ppm Max.
VTC79-2.5- 12M800000 (Frequency)
5.0ppm Max.
VTC79-5- 12M800000 (Frequency)
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-19
VTCXO 3.5x6 SMD 4 PAD
Temperature Compensated Crystal Oscillators With Voltage Control
SPECIFICATION
Frequency Range (MHz)
12.6, 12.8, 13.0, 14.4, 16.8, 19.2, 19.68
Input Voltage
3.0±0.3Vdc
Output Voltage
+0.9Vpp Min.
Frequency Stability/ Temperature
±2.5ppm/ -30~+80EC
Power Source Variation
±0.3ppm Max./ +3V±10%
Output Load
10pF/ 10k Ohms
Power Consumption
1.5mA Max. (12.6 ~ 13.0MHz)
2.0mA Max. (14.4 ~ 19.68MHz)
AFC Control Voltage
+1.5V±1.0V
Frequency Range Controlled by AFC
±5ppm~±12ppm Max.
Aging
±1ppm per year
Higher Harmonic
-10dBm Max.
Dimensions in mm
VTCXO 3.5x6 SMD 4 PAD Part Number
VTC36-4- 12M800000 (Frequency)
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, (626) 443-2121, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
O-20
CRYSTAL PART NUMBER REFERENCE SHEET
X
A
A
K
16M077600
F
L
E
Internal use
Frequency
M
K
Mode
A
B
C
D
E
= Fund.
= 3RD OT
= 5TH OT
= 7TH OT
= 9TH OT
Tolerance @ 25EC
A
B
C
D
E
F
G
H
X
Cut
A
B
= MHz
= KHz
= AT CUT
= BT CUT
= ± 5PPM
= ± 10PPM
= ± 15PPM
= ± 20PPM
= ± 25PPM
= ± 30PPM
= ± 50PPM
= ±100PPM
= Other
Package
Stability
A
B
C
D
E
F
G
H
I
J
K
L
M
N
P
Q
S
T
U
V
W
Y
Z
X
= HC6
= HC12
= HC50
= UM-4
= HC18
= HC33
= HC49USS
= UM-1/HC80
= HC49UPS
= HC48
= HC49
= HC49US
= HC51
= TO-5
= HC49UP
= UM-5/HC52
= SMD 5X7 4 PAD
= SMD 5X7 2 PAD
= SMD 6X3 4 PAD
= SMD 6X3 2 PAD
= SMD 5X3 4 PAD
= SMD 5X3 2 PAD
= CYLINDRICAL
= Other
D
F
G
H
I
J
L
N
X
= ± 5PPM
= ± 10PPM
= ± 15PPM
= ± 20PPM
= ± 25PPM
= ± 30PPM
= ± 50PPM
= ±100PPM
= Other
Temperature Range
D
E
F
G
H
I
J
K
L
X
= 0 to 50EC
= 0 to 70EC
= -5 to 55EC
= -10 to 60EC
= -20 to 70EC
= -25 to 85EC
= -40 to 85EC
= -55 to 105EC
= -55 to 125EC
= Other
Load Capacitance (CL)
00
XX
= Series
= pF (Parallel)
Options
A
B
C
D
E
F
G
H
X
= Standard
= Top Wire
= Gull Wing
= Sleeve
= Top Wire, Sleeve
= Gull Wing, Sleeve
= Mylar Spacers
= Tape & Reel
= Other
Marking:
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
18
A
STANDARD CRYSTAL CORP.
HC49U
CRYSTALS QUICK SELECTOR GUIDE
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
11.0 x 4.8 x 13.5
HC49U
1.8 to 125
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
0.43 x 0.19 x 0.53
AA=Fund.
BA=3rd OT
CA=5th OT
A=Standard
B=Top Wire
C=Gullwing
page C-1
Part Number
AA
K
20M00000
F
L
E
00
A
HC49US
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
11.4 x 5.0 x 4.0
AA=Fund.
BA=3rd OT
HC49
US
3.5 to 75
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
0.45 x 0.20 x 0.14
page C-2
Part Number
AA
L
20M00000
F
L
E
00
A
HC49USS
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
11.4 x 5.0 x 2.5
AA=Fund.
BA=3rd OT
HC49
USS
3.5 to 75
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
0.45 x 0.20 x 0.10
page C-2
Part Number
AA
G
20M00000
F
L
E
00
A
HC49UP
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
12.5 x 4.6 x 5.0
AA=Fund.
BA=3rd OT
HC49
UP
3.5 to 75
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
H=Tape/ R.
0.49 x 0.18 x 0.19
page C-3
Part Number
AA
P
20M00000
F
L
E
00
H
HC49UPS
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
12.5 x 4.6 x 3.5
AA=Fund.
BA=3rd OT
HC49
UPS
3.5 to 75
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
H=Tape/ R.
0.49 x 0.18 x 0.14
page C-3
Part Number
AA
I
20M00000
F
L
E
00
A
5 x 7 SMD
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
7.2 x 5.2 x 1.13
AA=Fund.
BA=3rd OT
5x7
4 pad
10 to 85
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
H=Tape/ R.
0.28 x 0.21 x 0.05
page C-4
Part Number
AA
S
20M00000
F
L
E
00
H
5 x 7 SMD
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
7.2 x 5.2 x 1.13
AA=Fund.
BA=3rd OT
5x7
2 pad
10 to 85
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
H=Tape/ R.
0.28 x 0.21 x 0.05
page C-4
Part Number
AA
T
20M00000
F
L
E
00
H
6 x 3.5 SMD
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
6.0 x 3.5 x 1.12
AA=Fund.
BA=3rd OT
6 x 3.5
4 pad
16 to 85
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
H=Tape/ R.
0.24 x 0.14 x 0.05
page C-5
Part Number
AA
U
20M00000
F
L
E
00
H
6 x 3.5 SMD
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
6.0 x 0.35 x 1.12
AA=Fund.
BA=3rd OT
6 x 3.5
2 pad
16 to 85
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
H=Tape/ R.
AA
V
20M00000
F
L
E
00
H
0.24 x 0.14 x 0.05
page C-5
Part Number
A-4
STANDARD CRYSTAL CORP.
5 x 3.2 SMD
CRYSTALS QUICK SELECTOR GUIDE
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
5.0 x 3.2 x 1.0
AA=Fund.
5 x 3.2
4 pad
10 to 45
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
00=Series
20=20pF
A=Standard
H= Tape/ R.
0.20 x 0.13 x 0.04
page C-6
Part Number
AA
W
20M00000
F
L
E
00
H
5 x 3.2 SMD
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
5.0 x 3.2 x 1.0
AA=Fund.
5 x 3.3
2 pad
10 to 45
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
00=Series
20=20pF
A=Standard
H=Tape/ R.
0.20 x 0.13 x 0.04
page C-6
Part Number
AA
Y
20M00000
F
L
E
00
H
UM-1 (HC80)
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
7.7 x 3.0 x 8.6
AA=Fund.
BA=3rd OT
UM-1
10 to 150
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
B=Top Wire
0.31 x 0.12 x 0.34
page C-7
Part Number
AA
H
20M00000
F
L
E
00
A
UM-5 (HC52)
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
7.7 x 3.0 x 5.8
AA=Fund.
BA=3rd OT
UM-5
15 to 150
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
0.31 x 0.12 x 0.23
page C-8
Part Number
AA
Q
20M00000
F
L
E
00
A
UM-4
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
7.7 x 3.0 x 4.5
AA=Fund.
BA=3rd OT
UM-4
20 to 150
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
0.31 x 0.12 x 0.18
Page C-9
Part Number
AA
D
20M00000
F
L
E
00
A
TO-5
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
i9.6 x i6.7
AA=Fund.
BA=3rd OT
TO-5
5 to 150
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
i0.378 x i0.265
page C-10
Part Number
AA
N
20M00000
F
L
E
00
A
HC51
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
19.2 x 8.9 x 19.7
AA=Fund.
BA=3rd OT
HC51
1.0 to 20.0
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
B=Top Wire
C=Gullwing
0.76 x 0.35 x 0.78
page C-11
Part Number
AA
M
20M00000
F
L
E
00
A
HC6 (pin)
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
19.2 x 8.9 x 19.7
AA=Fund.
BA=3rd OT
HC6
1.0 to 20.0
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
0.76 x 0.35 x 0.78
page C-11
Part Number
AA
A
20M00000
F
L
E
00
A
3x9
Cylindrical
Dimensions mm/inch
Mode/cut
Holder
Frequency
Tol. @ 25EC
Freq. Stability
Temp. Range
Load Cap.
Options
i9.3 x i3.1
AA=Fund.
BA=3rd OT
3x9
3.5 to 60.0
MHz
F= ±30ppm
G=±50ppm
L= ±50ppm
N= ±100ppm
E=0E to 70EC
J=-40E to 85EC
00=Series
20=20pF
A=Standard
AA
Z
20M00000
F
L
E
00
A
i0.37 x i0.12
page C-12
Part Number
A-5
CRYSTAL REQUEST FOR QUOTE SHEET
Your Company Name: _________________________________________________
Your Name: _________________________, Phone :_________________________
Fax: _______________________________, E-Mail: __________________________
Address: ____________________________________________________________
Quantity: ___________________________, Delivery: _________________________
Part Number: _________________________ Example: AAK20M000000FLE20A
Package Type: _______________________ (HC49U, UM-1, 5x7 SMD 4 Pad, Etc.)
Frequency: ___________________________ MHz or KHz
Frequency Tolerance: ±__________________ PPM @ 25EC
Frequency Stability: ±__________________ PPM @ Operating Temperature Range
Operating Temperature Range: from_________EC to _________EC
Mode of Operation: ____________________ (Fundamental, 3rd Overtone, Etc.)
Load Capacitance (CL): Parallel________pF or ____Series
Resistance: ________________________ Ohms
C0 (Shunt): ________________________ pF
C1 ( Motional): _____________________ pF
Options: Top Wire_____, Gull Wing_____, Sleeve_____, Insulator_____, T&R_____.
Special Instructions: ___________________________________________________
____________________________________________________________________
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
CUSTOM MADE CRYSTALS
Specifications
Package Styles
Frequency Tolerance @ 25EC±2EC
10 to 100PPM
Seal
Lead Type
Large
Standard
Miniature
Operating Temperature Ranges
-10EC to 60EC
-20EC to 70EC
-30EC to 80EC
-40EC to 85EC
-55EC to 105EC
Resistance
Weld
Wire
HC51U
HC49U
UM-1
Pin
HC48U
HC50U
--------
Wire
HC33U
HC18U
--------
Pin
HC6U
HC25U
--------
Fundamental
1.00-4.8 MHz
1.8-30MHz
2-30MHz
Overtone
N/A
20-200 MHz
25-200 MHz
Freq. Stability Over Temperature
Range
10 to 100PPM
Load Capacitance (TYP)
12pF to 50pF &
Series
Aging Rate per Year
1 to 7PPM
Drive Level
0.1mW (TYP)
Solder
Seal
Oscillation
Mode
STANDARD FREQUENCIES AVAILABLE IN HC49/U PACKAGE
Frequency Tolerance @ 25EC ± 30PPM, Temperature Stability 0 to 70EC ± 50PPM
FREQ. (MHz)
CL (pF)
ESR (Ohms)
FREQ. (MHz)
CL (pF)
ESR (Ohms)
FREQ. (MHz)
CL (pF)
ESR (Ohms)
3.000000
32
200
7.372800
20
40
14.318180
Series
25
3.275800
18
120
8.000000
Series
35
14.318180
20
25
3.579545
18
120
8.000000
20
35
14.745600
20
25
3.686400
Series
120
8.192000
Series
35
15.000000
Series
25
3.686400
20
120
8.192000
20
35
15.000000
20
25
4.000000
Series
100
9.2160000
Series
35
16.000000
Series
25
4.000000
20
100
9.600000
Series
35
16.000000
20
25
4.096000
Series
100
9.600000
20
35
17.734475
20
25
4.194304
12
100
9.830400
Series
35
18.000000
Series
20
4.433619
20
70
9.830400
20
35
18.432000
Series
20
4.915200
Series
55
10.000000
Series
30
18.432000
20
20
4.915200
20
55
10.000000
20
30
19.660800
Series
20
5.000000
20
50
11.000000
Series
30
19.660800
20
20
5.068800
Series
50
11.000000
20
30
20.000000
Series
20
5.068800
20
50
11.059200
Series
30
20.000000
20
20
5.185000
20
50
11.059200
20
30
22.118400
Series
20
5.990400
Series
40
12.000000
Series
30
21.118400
20
20
6.000000
Series
40
12.000000
20
30
24.000000
Series
20
6.000000
20
40
12.288000
Series
30
24.000000
20
20
6.144000
20
40
12.288000
20
30
28.000000
Series
20
6.553600
20
40
13.516800
Series
25
28.000000
20
20
7.372800
Series
40
For unlisted frequencies or different specifications contact the factory
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
HC49U
MICROPROCESSOR CRYSTALS / RESISTANCE WELD
SPECIFICATION
Frequency Range
1.8432 to 180.00MHz
Frequency Tolerance
± 50 PPM ( Standard )
Frequency Stability
± 100 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF & Series
Shunt Capacitance
7pF Maximum
Drive Lavel
1mWatt Maximum
Aging
±5 PPM per year Maximum
Dimensions in In (mm)
HC49U Part Number Break Down
AA K 20M000000 F L E 18 A
(Frequency)
MODE
AA= Fundamental
BA= 3rd Overtone
CA= 5th Overtone
DA= 7th Overtone
TOLERANCE
B= ±10 PPM
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
STABILITY
H= ±20 PPM
J= ±30 PPM
L= ±50 PPM
N= ±100 PPM
CL
TEMP. RANGE
E= 0 to 70EC
H= -20 to 70EC
J= -40 to 85EC
OPTIONS
A= Standard
B= Top Wire
C= Gull Wing
D= Sleeve
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
C-1
HC49US Low Profile
MICROPROCESSOR CRYSTALS / RESISTANCE WELD
SPECIFICATION
Frequency Range
3.579545 to 60.000 MHz
Frequency Tolerance
± 50 PPM ( Standard )
Frequency Stability @ 25EC
± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF or Series
Shunt Capacitance
7pF Maximum
Drive Lavel
1mWatt Maximum
Aging
±5 PPM per year Maximum
Dimensions in mm
HC49US Part Number Break Down
AA L 20M000000 F L E 18 H
(Frequency)
CL
MODE
AA= Fundamental
BA= 3rd Overtone
HOLDER
G = 2.8 H
L = 4.0 H
TOLERANCE
B= ±10 PPM
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
STABILITY
H= ±20 PPM
J = ±30 PPM
L= ±50 PPM
N= ±100 PPM
TEMP. RANGE
E= 0 to 70EC
H= -20 to 70EC
J= -40 to 85EC
OPTIONS
A= Standard
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
C-2
HC49UP Low Profile Surface Mount
MICROPROCESSOR CRYSTALS / RESISTANCE WELD
SPECIFICATION
Frequency Range
3.579545 to 60.000 MHz
Frequency Tolerance
± 50 PPM ( Standard )
Frequency Stability @ 25EC
± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF or Series
Shunt Capacitance
7pF Maximum
Drive Lavel
1mWatt Maximum
Aging
±5 PPM per year Maximum
Dimensions in mm
Recommended Pad Layout
HC49UP Part Number Break Down
AA P 20M000000 F L E 18 H
(Frequency)
CL
MODE
HOLDER
TOLERANCE STABILITY
TEMP. RANGE OPTIONS
AA= Fundamental
BA= 3rd Overtone
I = 3.5 H
P = 5.0 H
B= ±10 PPM
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
E= 0 to 70EC
H= -20 to 70EC
J= -40 to 85EC
H= ±20 PPM
J = ±30 PPM
L= ±50 PPM
N= ±100 PPM
A= Standard
H= Tape & Reel
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
C-3
5x7 CRYSTAL MINIATURE SMD
MICROPROCESSOR CRYSTAL
SPECIFICATION
Frequency Range
10 to 100 MHz
Frequency Tolerance
± 50 PPM (Standard)
Frequency Stability
± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF & Series
Shunt Capacitance
7pF Maximum
Drive Lavel
100uWatt Maximum
Aging
±3 PPM per year Maximum
Dimensions in mm
S - 4 PAD
Layout
T - 2 PAD
Pad
Pad Layout
5 x 7 MINI. SMD CRYSTAL Part Number Break Down
AA S 20M000000 F L E 18 H
(Frequency)
MODE
HOLDER
AA= Fundamental S = 4 Pad
BA= 3rd Overtone T = 2 Pad
CL
TOLERANCE STABILITY
TEMP. RANGE OPTIONS
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
E= 0 to 70EC
H= -20 to 70EC
J= -40 to 85EC
H=
J=
L=
N=
±20 PPM
±30 PPM
±50 PPM
±100 PPM
A= Standard
H= Tape & Reel
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
C-4
6x3 CRYSTAL MINIATURE SMD
MICROPROCESSOR CRYSTAL
SPECIFICATION
Frequency Range
12 to 100 MHz
Frequency Tolerance
± 50 PPM (Standard)
Frequency Stability
± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF & Series
Shunt Capacitance
7pF Maximum
Drive Lavel
100uWatt Maximum
Aging
±3 PPM per year Maximum
Dimensions in mm
U - 4 PAD
V - 2 PAD
Layout
Pad Layout
Pad
6X3 MINI. SMD CRYSTAL Part Number Break Down
AA U 20M000000 F L E 18 H
(Frequency)
CL
HOLDER
MODE
AA= Fundamental U = 4 Pad
BA= 3rd Overtone V = 2 Pad
TOLERANCE
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
STABILITY
H= ±20 PPM
J= ±30 PPM
L= ±50 PPM
N= ±100 PPM
TEMP. RANGE
E= 0 to 70EC
H= -20 to 70EC
J= -40 to 85EC
OPTIONS
A= Standard
H= Tape & Reel
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
C-5
5x3 CRYSTAL MINIATURE SMD
MICROPROCESSOR CRYSTAL
SPECIFICATION
Frequency Range
10 to 45 MHz (Fundamental)
Frequency Tolerance
± 50 PPM (Standard)
Frequency Stability
± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF & Series
Shunt Capacitance
7pF Maximum
Drive Lavel
100uWatt Maximum
Aging
±3 PPM per year Maximum
Dimensions in mm
W - 4 PAD
Y - 2 PAD
Pad Layout
Pad Layout
5 x 3 MINI. SMD CRYSTAL Part Number Break Down
AA W 20M000000 F L E 18 H
(Frequency)
MODE
HOLDER
AA= Fundamental W = 4 Pad
Y = 2 Pad
TOLERANCE
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
CL
STABILITY
J= ±30 PPM
L= ±50 PPM
N= ±100 PPM
TEMP. RANGE
E= 0 to 70EC
OPTIONS
A= Standard
H= Tape & Reel
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacblell.net
C-6
UM-1 (HC80)
MICROPROCESSOR CRYSTALS / RESISTANCE WELD
SPECIFICATION
Frequency Range
10 to 150.00MHz
Frequency Tolerance
± 50 PPM ( Standard )
Frequency Stability
± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF & Series
Shunt Capacitance
7pF Maximum
Drive Lavel
1mWatt Maximum
Aging
±5 PPM per year Maximum
Dimensions in In (mm)
UM-1 Part Number Break Down
AA H 20M000000 F L E 18 A
(Frequency)
MODE
AA= Fundamental
BA= 3rd Overtone
CA= 5th Overtone
TOLERANCE
B= ±10 PPM
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
STABILITY
H= ±20 PPM
J= ±30 PPM
L= ±50 PPM
N= ±100 PPM
CL
TEMP. RANGE
E= 0 to 70EC
H= -20 to 70EC
J= -40 to 85EC
OPTIONS
A= Standard
B= Top Wire
C= Gull Wing
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
C-7
UM-5 (HC52)
MICROPROCESSOR CRYSTALS / RESISTANCE WELD
SPECIFICATION
Frequency Range
10 to 150.00MHz
Frequency Tolerance
± 50 PPM ( Standard )
Frequency Stability
± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF & Series
Shunt Capacitance
7pF Maximum
Drive Lavel
1mWatt Maximum
Aging
±5 PPM per year Maximum
Dimensions in In (mm)
UM-5 Part Number Break Down
AA Q 20M000000 F L E 18 A
(Frequency)
MODE
AA= Fundamental
BA= 3rd Overtone
CA= 5th Overtone
TOLERANCE
B= ±10 PPM
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
STABILITY
H= ±20 PPM
J= ±30 PPM
L= ±50 PPM
N= ±100 PPM
CL
TEMP. RANGE
E= 0 to 70EC
H= -20 to 70EC
J= -40 to 85EC
OPTIONS
A= Standard
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
C-8
UM-4
MICROPROCESSOR CRYSTALS / RESISTANCE WELD
SPECIFICATION
Frequency Range
10 to 150.00MHz
Frequency Tolerance
± 50 PPM ( Standard )
Frequency Stability
± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF & Series
Shunt Capacitance
7pF Maximum
Drive Lavel
1mWatt Maximum
Aging
±5 PPM per year Maximum
Dimensions in In (mm)
UM-4 Part Number Break Down
AA D 20M000000 F L E 18 A
(Frequency)
MODE
AA= Fundamental
BA= 3rd Overtone
CA= 5th Overtone
TOLERANCE
B= ±10 PPM
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
STABILITY
H= ±20 PPM
J= ±30 PPM
L= ±50 PPM
N= ±100 PPM
CL
TEMP. RANGE
E= 0 to 70EC
H= -20 to 70EC
J= -40 to 85EC
OPTIONS
A= Standard
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
C-9
TO-5
MICROPROCESSOR CRYSTALS / RESISTANCE WELD
SPECIFICATION
Frequency Range
5 to 150.00MHz
Frequency Tolerance
± 50 PPM ( Standard )
Frequency Stability
± 100 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF & Series
Shunt Capacitance
7pF Maximum
Drive Lavel
1mWatt Maximum
Aging
±5 PPM per year Maximum
Dimensions in In (mm)
TO-5 Part Number Break Down
AA N 20M000000 F L E 18 A
(Frequency)
MODE
AA= Fundamental
BA= 3rd Overtone
CA= 5th Overtone
DA= 7th Overtone
TOLERANCE
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
STABILITY
H= ±20 PPM
J= ±30 PPM
L= ±50 PPM
N= ±100 PPM
CL
TEMP. RANGE
E= 0 to 70EC
J= -40 to 85EC
OPTIONS
A= Standard
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
C-10
HC51 / HC6
RESISTANCE WELD
SPECIFICATION
Frequency Range
1.0 to 20.000 MHz
Frequency Tolerance
± 50 PPM ( Standard )
Frequency Stability @ 25EC
± 50 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF or Series
Shunt Capacitance
7pF Maximum
Drive Lavel
1mWatt Maximum
Aging
±5 PPM per year Maximum
Dimensions in mm
HC51 / HC6 Part Number Break Down
AA M 20M000000 F L E 18 A
(Frequency)
MODE
AA= Fundamental
HOLDER
M = HC51
A = HC6
TOLERANCE
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
CL
STABILITY
H= ±20 PPM
J = ±30 PPM
L= ±50 PPM
N= ±100 PPM
TEMP. RANGE
E= 0 to 70EC
J= -40 to 85EC
OPTIONS
A= Standard
B= Top Wire
(HC51 Only)
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
C-11
3x9 Cylindrical Crystal
SPECIFICATION
Frequency Range
3.579 to 60.00MHz
Frequency Tolerance
± 50 PPM ( Standard )
Frequency Stability
± 100 PPM ( Standard )
Operating Temperature Range 0EC to 70EC ( Standard )
Load Capacitance ( CL )
12pF to 50pF & Series
Shunt Capacitance
7pF Maximum
Drive Lavel
1mWatt Maximum
Aging
±5 PPM per year Maximum
Dimensions in In (mm)
3x9 Cylindrical Crystal Part Number Break Down
AA Z 20M000000 F L E 18 A
(Frequency)
CL
MODE
TOLERANCE STABILITY
TEMP. RANGE
OPTIONS
AA= Fundamental
BA= 3rd Overtone
D= ±20 PPM
F= ±30 PPM
G= ±50 PPM
H= ±100 PPM
E= 0 to 70EC
J= -40 to 85EC
A= Standard
H= ±20 PPM
J= ±30 PPM
L= ±50 PPM
N= ±100 PPM
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, Ca., 91731
Phone: (800) 423-4578, Fax: (626) 443-9049
www.standardcrystalcorp.com, E-Mail: stdxtl@pacbell.net
C-12