2mm pitch metric connectors For pcb Connection FCN-086 /087 SERIES nOVERVIEW Fujitsu’s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards developed to support high-speed transmission/high density packaging of communication equipment, conforms to IEC 917 (DIN 43355) and IEC 61076-4-101, and supports compact PCI. Product meets Bellcor 1217. To support high-speed transmission, these connectors implement low inductance, low cross-talk, and matching characteristic impedance (50 ohms), exhibiting superb transmission characteristics. Connection with the PCB is solderless (press fit) for both the plug/socket side, making mounting cost effective. Insertion connections are completely unnecessary since a polarity key is supported. Plug contact has a four level sequence structure that makes connection/disconnection in an active state possible. Terminals have a five level pin length to support various applications. New customized connectors can be supported by freely combining the pin lengths of contacts and terminals. For shield plate products, which support high-speed transmission based on standard products, 5 row 55, 95, 110, 110 (with key) and 125 contact, plugs support 77, 133, 154 and 175 contacts. The shield plate corresponds to the respective number of contacts, and the standard is post attachment. Sockets can also be shipped with shields pre-attached. 8 row products are also in the series. Consult factory for your requirements. Fujitsu has developed a new high density power connector (25% denser) to improve operability. A double press fit, which can connect two printed boards with one connector, greatly contributes to improved mounting and decreasing cost. Consult factory for details. FCN-086 / 087 Series n specifications Specification Item Standard connector Power connecto r Operating temperature range -55˚ C to +125˚ C -40˚ C to +85˚ C Current rating 1A DC max. (75˚ C ) 7A DC/contact max. (75˚ C ) Voltage rating 500V AC r.m. s 56 V D C Contact resistance 20mohms max. (DC 20mV,10mA ) 20mohms max. (DC 20mV, 10mA ) Insulation resistance 10,000 Mohms min. (100V DC ) 10,000 Mohms min. (100V DC ) Dielectric strength 750V AC for 1 minut e 600V AC for 1 minut e Insertion/Withdrawl life 125 time s 250 time s Insertion force 0.75N/pin min . 20N/connector max . Withdrawl force 0.15N/pin min . 1N/connector min . nMaterials n characteristics Characteristic impedance 50 ohms Transmission speed 300 MHz Near end cross talk 4.3 % max. Material Item Material Item Insulator Conductor Polyester resin (UL94V-0) Copper alloy Plating Press fit: Solder Press fit other: PAGOS Contact area: Gold (PAGOS) Lead / press fit area: Solder n configuration of F&T 2 mm H.M. connector 1. Basic configuration of socket/plug There are five types of sockets: three basic types: type A (110 contacts), type B (125 contacts), and type C (55 contacts), and a 110 contact and 95 contact types. Many coding keys are in the series to prevent insertion errors. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com FCN-086 / 087 Series n terminal configuration of plug The contact pins have a three-level sequence structure and can be connected/disconnected in an active state. The terminal side can support various applications with four types of length. These combinations allow 20 types of terminals. Relationship between housing and terminals Terminal types in the series Contact length PWB Surface Lead length PC Board Face Contact Types Contact length PWB Surface Lead length Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com FCN-086 / 087 Series Request Form for Customer Specific Pin Arrangement for 2mm Connectors Part of the benefit of using the FCN-086 2mm Backplane connector is the flexibility of creating unique contact loads in the connector body. To define your needs, make a photocopy of the following page(s), select your connector needs, and fill in the blanks with the specific contact designation (see page 5 for available contacts). Forward to Fujitsu for quotation and part number assignment. (Please note that the pin arraignment drawings are "View from the Mating Side"). 1. TYPE A (110 pos. with polarization key) (5+2) f e d c b a z 1 2 3 4 5 6 7 8 9 10 11 2. TYPE B (125 pos.) (5+2) 15 16 17 18 19 20 21 22 23 24 25 f e d c b a z 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 3. TYPE C (55 pos.) (5+2) f e d c b a z 1 2 3 4 5 6 7 8 9 10 11 4. 95 pos. (5+2) f e d c b a z 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com FCN-086 / 087 Series n transmission characteristics The transmission characteristics were designed to an optimum level by repeating various transmission characteristics simulations when the structure was designed, so as to improve the transmission characteristics of this connector. The characteristic impedance and the measurement device of the connector are shown below. Measurement Point Measurement Result Fujitsu Components a b c d e Ground Not connected Measurement signal At Start 100 p s 300 p s 500 p s 1 ns Frequency: Hz 1.75 GH z 580 MH z 350 M H z 175 MH z Characteristic Impedance ( Ω ) 45.3 to 64. 0 48.2 to 56. 8 49.2 to 54. 6 49.3 to 52. 8 Near/Far end cross talk: % 1.96/1.1 4 1.06/0.5 1 1.49/0.7 8 0.71/0.2 7 Other Supplier At Start 100 p s 300 p s 500 p s 1 ns Frequency: Hz 1.75 GH z 580 MH z 350 MH z 175 MH z Characteristic Impedance ( Ω ) 47.4 to 66. 1 48.2 to 56. 8 49.5 to 59. 2 47.7 to 53. 5 Near/Far end cross talk: % 2.24/1.4 1 300.0m 1.57/0.9 8 1.14/0.6 7 0.78/0.3 5 Delay Time signal 10.00m V/Div. in 200.0m 49.00n 100.0p out Characteristic Impedance 50.00n S/Div PC board part PC board part PC board part 1.Measurement voltage: Vin = 5.0V 2.Rise time: Tr = 100ps, 300ps, 500ps, 1ns 3.Measurement device: TDR measurement device CSA803 and SD24 (Tektronix) 4.Measurement system C oaxial cableformeasurement Plug Ω termination 50Ω connecto Socket CSA 80.3 SD 24 M easurementboard Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com FCN-086 /087 Series Compact PCI / VME n standard and hot swap part numbers Coding Keys for Daughter Card FCN-086B1278 - 3.3V or FCN-086B2348 - 5.0V Coding Keys for Midplane/Backplane FCN-086A3456 - 3.3V or FCN-086A2348 - 5.0V J1 P1 Fem ale R eceptacle s M alePin H eaders 1 J5 4 P5 R J5 1 2 J4 5 P4 R J4 2 3 J3 6 P3 R J3 3 1 J2 4 P2 R J2 1 2 J1 Fem ale R eceptacle s Standard 5 H otSw ap 7 R ear I/OC ard 3U =100.0 (3.937) D aughtercard 6U =223.35 (9.19) Backplane P1 Reference Number 160.0(6. 30) n computer telephony part numbers Coding Keys for Midplane/ Backplane FCN-086A3456 - 3.3V P1 or FCN-086A2348 - 5.0V FCN-086B1248 - P4 Coding Keys for Daughter Card FCN-086B1278 - 3.3V or FCN-086B2348 - 5.0V FCN-086B3567 - J4 J1 Part Number Designation s 1 FCN-086J110-G111A-BC R J5, J2, RJ5, RJ2 2 FCN-086J110-G111-BC R J4, J1, RJ 4 3 FCN-086J095-G111A-BC R J3, RJ 3 4 FCN-086P154-G/111A-BC R P5, P 2 5 FCN-086P154-G/104-BC R 6 FCN-086P133-G/111A-BC R P 3 7 FCN-086P154-G/114-BC R P1 8 Future Product s J4, P 5 9 FCN-086P154-G/516-BC R P4 P4, P 1 Backplane 1 8 J5 J4 Male Pin Headers 8 P5 9 P4 3 J3 6 P3 1 J2 4 P2 2 J1 7 P1 Female Receptacles RJ5 1 RJ3 3 Rear I/O Transition Card Daughtercard 6U =223.35 (9.19) Female Receptacles 160.0 (6.30) 80.0 (3.15) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 6- FCN-086 /087 Series Compact PCI / VME P3 Type 3 STRAIGHT PLUG (133 POSITIONS) n MOUNTING HOLE LAYOUT n Dimensions 9.7+0.2 0 (0.382+0.008) 0 11.2+0.2 0 (0.440+0.008) 0 Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: φ0.7±0.025 mm (.028 in.) Through hole diameter (after plating): φ0.6±0.05 mm (.024) 3.7 (0.146) 3.7 (0.146) 2x(7-1)=12 (0.472) 2 (0.079) 2x(19-1)=36±0.1 (1.417±0.004) 13 3 (0. - Ø 02 0.6 4± 0.0 ±0.0 02 5 ) -0.004 2 (0.079) 2x(19-1)=36 (1.417) (0.1180 2 (0.079) 2x(7-1)=12 (0.472) 0 3 -0.1 ) 13.45 (0.530) 2x(7-1)=12±0.5 (0.472±0.002) 2±0.5 (0.079±0.002) 2±0.5 (0.079±0.002) Unit: mm (in.) Unit: mm (in.) ORDERING PART NUMBER: FCN-086P133-G/111A-BCR n P3 Type B male feed through STRAIGHT PLUG (133 POSITIONS) n Dimensions n MOUNTING HOLE LAYOUT 11.2+0.2 0 8.2+0.2 0 (0.039+0.008) Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: φ0.7±0.025 mm (.028 in.) 3.7 (0.146) (0.440+0.008) 0 16 (0.630) 11.2+0.2 0 (0.440+0.008) 0 16 (0.630) 2x(7-1)=12 (0.472) 2x(19-1)=36 ±0.1 (1.417±0.004) 2 (0.079) 2x(19-1)=36 (1.417) -0.004 13 (0 3 .0 Ø 24 0. ±0 6 ± .0 0.0 02 5 ) (0.1180 2 (0.079) 2 (0.079) 0 3 -0.1 ) 13.45 (0.530) 2x(7-1)=12±0.5 (0.472±0.002) 2±0.5 (0.079±0.002) 2±0.5 (0.079±0.002) 2x(7-1)=12 (0.472) Unit: mm (in.) n Unit: mm (in.) ORDERING PART NUMBER: FCN-086P133-G/502A-BCR Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 6- FCN-086 /087 Series Compact PCI / VME P1/P4 Type A STRAIGHT PLUG (154 POSITIONS) n MOUNTING HOLE LAYOUT n Dimensions Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6±0.05 mm (.024) 8.2+0.2 3.7 0 (0.039+0.008) (0.146) 9.7+0.2 3.7 (0.146) 0 (0.382+0.008) 11.2+0.2 0 3.7 (0.440+0.008) (0.146) 0 2 (0.079) 2±0.5 (0.079±0.002) -0.004 0 3 -0.1 2x(7-1)=12 (0.472) (0.1180 2 (0.079) 2x(11-1)=20 (0.787) 24 (0.945) 15 4 (0. - Ø 02 0.6 4± 0.0 ±0.0 02 5 ) 0.1 2 (0.079) 2x(11-1)=20 (0.787) 2x(11-1)=20±0.5 (0.787±0.002) 4±0.5 (0.157±0.002) + Ø2 0 4 .00 ) 790 ¯(0.0 0 ) 13.45 (0.530) 8±0.5 (0.315±0.002) 2±0.5 (0.079±0.002) 2x(11-1)=20±0.5 (0.787±0.002) 2x(7-1)=12±0.5 (0.472±0.002) 2x(7-1)=12 (0.472) 48 (1.890) Unit: mm (in.) Unit: mm (in.) ORDERING PART NUMBER: FCN-086P154-G/104-BCR n P2/P5 Type B STRAIGHT PLUG (154 POSITIONS) n Dimensions n MOUNTING HOLE LAYOUT 9.7+0.2 0 3.7 (0.382+0.008) (0.146) 0 Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6±0.05 mm (.024) 11.2+0.2 3.7 0 (0.440+0.008) (0.146) 0 2x(7-1)=12±0.5 (0.472±0.002) 2±0.5 (0.079±0.002) 5 0.0 .6± ) Ø0 .002 0 415 024± (0. 2x(22-1)=42(1.654) 2 (0.079) 2x(7-1)=12 (0.472) 0 3 -0.1 (0.1180 2 (0.079) -0.004 ) 13.45 (0.530) 2±0.5 (0.079±0.002) 2x(22-1)=42±0.1 (01.654±0.004) 2x(7-1)=12 (0.472) 2 (0.079) Unit: mm (in.) n Unit: mm (in.) ORDERING PART NUMBER: FCN-086P154-G/111A-BCR Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 6- FCN-086 /087 Series Compact PCI / VME P1 Type A Hot Swap 110 Signal Connector STRAIGHT PLUG (154 POSITIONS) n MOUNTING HOLE LAYOUT n Dimensions 8.2+0.2 0 3.7 (0.039+0.008) (0.146) 9.7+0.2 3.7 0 (0.382+0.008) (0.146) Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6±0.05 mm (.024) 11.2+0.2 3.7 0 (0.440+0.008) (0.146) 0 2x(11-1)=20±0.5 (0.787±0.002) 2x(7-1)=12 (0.472) 2±0.5 (0.079±0.002) 2x(7-1)=12±0.5 (0.472±0.002) 13.45 (0.530) ) -0.004 0 3 -0.1 (0.1180 0 +0.1 Ø2 0 4 .00 ) 790 2 (0.079) 2x(7-1)=12 (0.472) 15 4 (0. - Ø 02 0.6 4± 0.0 ±0.0 02 5 ) ¯(0.0 2x(11-1)=20 (0.787) 2x(11-1)=20±0.5 (0.787±0.002) 4±0.5 (0.157±0.002) 2±0.5 (0.079±0.002) 2 (0.079) 2 (0.079) 2x(11-1)=20 (0.787) 24 (0.945) 8±0.5 (0.315±0.002) 48 (1.890) Unit: mm (in.) Unit: mm (in.) n ORDERING PART NUMBER: FCN-086P154-G/114-BCR P4 Type A Male Feed Through STRAIGHT PLUG (154 POSITIONS) n Dimensions n MOUNTING HOLE LAYOUT Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6±0.05 mm (.024) 8.2+0.2 0 (0.039+0.008) 16 (0.630) 11.2+0.2 0 (0.440+0.008) 0 16 (0.630) 2x(7-1)=12 (0.472) 8±0.5 2x(11-1)=20±0.5 (0.315±0.002) (0.787±0.002) 2 (0.079) 2±0.5 (0.079±0.002) -0.004 (0.1180 48 (1.890) +0.1 0 2x(7-1)=12 (0.472) Ø2 0 4 .00 ) 790 2x(11-1)=20 (0.787) 24 (0.945) 2 (0.079) ¯(0.0 2 (0.079) 2x(11-1)=20 (0.787) 0 3 -0.1 ) 13.45 (0.530) 2x(7-1)=12±0.5 (0.472±0.002) 2±0.5 (0.079±0.002) 2x(11-1)=20±0.5 (0.787±0.002) 4±0.5 (0.157±0.002) Unit: mm (in.) n 15 4 (0. - Ø 02 0.6 4± 0.0 ±0.0 02 5 ) Unit: mm (in.) ORDERING PART NUMBER: FCN-086P154G/401-BCR Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 6- FCN-086 /087 Series Compact PCI / VME Type 2 Feed Through STRAIGHT PLUG (154 POSITIONS) n Dimensions n MOUNTING HOLE LAYOUT 8.2+0.2 0 (0.039+0.008) Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6±0.05 mm (.024) 16 (0.630) 11.2+0.2 0 (0.440+0.008) 0 16 (0.630) 2x(7-1)=12 (0.472) 2±0.5 (0.079±0.002) -0.004 2x(7-1)=12±0.5 (0.472±0.002) 0 3 -0.1 2 (0.079) 2x(22-1)=42 (1.654) 2x(22-1)=42±0.1 (1.654±0.004) 2±0.5 (0.079±0.002) (0.1180 2 (0.079) 0 3 -0.1 ) 13.45 (0.530) (0.1180 ) 2x(7-1)=12 (0.472) 2 (0.079) 154 - Ø0.6±0.05 (0.024±0.002) Unit: mm (in.) Unit: mm (in.) n ORDERING PART NUMBER: FCN-086P154-G/401A-BCR Type 2 feed through STRAIGHT PLUG (154 POSITIONS) n Dimensions 11.2+0.2 0 (0.440+0.008) 0 n MOUNTING HOLE LAYOUT 3.7 (0.146) 8.2+0.2 0 (0.039+0.008) 0 16 (0.630) 11.2+0.2 0 (0.440+0.008) 0 Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6±0.05 mm (.024) 16 (0.630) 2x(22-1)=42±0.1 (1.654±0.004) 2±0.5 (0.079±0.002) 2±0.5 (0.079±0.002) 154 - Ø0.6±0.05 (0.024±0.002) 2 (0.079) 2x(7-1)=12 (0.472) -0.004 2x(22-1)=42 (1.654) (0.1180 2 (0.079) 0 3 -0.1 ) 2x(7-1)=12±0.5 (0.472±0.002) 13.45 (0.530) 2x(7-1)=12 (0.472) 2 (0.079) Unit: mm (in.) n Unit: mm (in.) ORDERING PART NUMBER: FCN-086P154-G/502A-BCR Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 6-10 FCN-086 /087 Series Compact PCI / VME P5 Type B Feed thru Computer Telephony Connector STRAIGHT PLUG (154 POSITIONS) n MOUNTING HOLE LAYOUT n Dimensions 11.2+0.2 0 3.7 (0.146) (0.440+0.008) 0 Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6±0.05 mm (.024) 8.2+0.2 0 (0.039+0.008) 0 16 (0.630) 11.2+0.2 0 (0.440+0.008) 16 (0.630) 0 2x(7-1)=12 (0.472) 2 (0.079) 2x(22-1)=42±0.1 (1.654±0.004) 2±0.5 (0.079±0.002) 13.45 (0.530) 2x(7-1)=12±0.5 (0.472±0.002) 2±0.5 (0.079±0.002) 154 - Ø0.6±0.05 (0.024±0.002) 2x(7-1)=12 (0.472) -0.004 ) 2x(22-1)=42 (1.654) 0 3 -0.1 2 (0.079) (0.1180 2 (0.079) Unit: mm (in.) Unit: mm (in.) n ORDERING PART NUMBER: FCN-086P154-G/503A-BCR P4 Type A Computer Telephony Connector STRAIGHT PLUG (154 POSITIONS) n Dimensions n MOUNTING HOLE LAYOUT 8.2+0.2 0 3.7 (0.039+0.008) (0.146) 0 Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6±0.05 mm (.024) 9.7+0.2 3.7 0 (0.382+0.008) (0.146) 0 11.2+0.2 0 3.7 (0.440+0.008) (0.146) 0 8±0.5 2x(11-1)=20±0.5 (0.315±0.002) (0.787±0.002) 2x(7-1)=12 (0.472) 2±0.5 (0.079±0.002) ) 48 (1.890) -0.004 (0.1180 2 (0.079) 2x(7-1)=12 (0.472) 0 3 -0.1 2x(11-1)=20 (0.787) 24 (0.945) 0 2 (0.079) 2x(11-1)=20 (0.787) +0.1 ¯2 0 4 .00 ) 790 ¯(0.0 13.45 (0.530) 2x(7-1)=12±0.5 (0.472±0.002) 2 (0.079) 2x(11-1)=20±0.5 (0.787±0.002) 4±0.5 (0.157±0.002) 2±0.5 (0.079±0.002) Unit: mm (in.) n 15 4 (0. - Ø 02 0.6 4± 0.0 ±0.0 02 5 ) Unit: mm (in.) ORDERING PART NUMBER: FCN-086P154-G/516-BCR Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 6-11 FCN-086 / 087 Series SOCKET: 55 CONTACTS n Dimensions 2 x (11-1) = 20 (.787) 2 (.079) l ab ail av ts ar DISCONTINUED P rs be m Nu rt Pa ALTERNATE NO 10.95 (0.431) 2.35 2 (.093) (.079) 3.7 (0.146) 3.4 (0.134) n MOUNTING HOLE LAYOUT Thickness: 1.4 to 2.0 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6±0.05 mm (.024) 10.8 (0.425) 9.2 (0.362) a 25 (.984) 2 x (11-1) = 20 (.787) 2 (.079) Section A-A Unit: mm (in.) 2±0.05 (.079±0.002) 5 0.0 ) .6± 02 -f0 0.0 55 24± (.0 2 x (6-1) = 10±0.05 (0.394±0.002) 2 (.079) 2 x (5-1) = 8 (.315) 11.4 (0.449) 2±0.05 (.079±0.002) 20.2 (0.795) 2 2 (.079) (.079) b 1.5±0.05 (.0.060±0.002) d 2 x (5-1) = 8 (.315) 0.3 (0.012) e 2x (11-1)=20±0.05 (0.787±0.002) Unit: mm (in.) n ORDERING PART NUMBER: FCN-086J055-G/101-BCR FCN-086J055-G/111-BCR (with pre-attached upper shield) SHIELD PLATE n Dimensions n Dimensions 4 x (6-1)=20 (0.787) 4±0.2 (0.157±0.008) 4 x (5-1)=16 (0.630) Unit: mm (in.) ORDERING PART NUMBER: FCN-086J055-G/USD-BCR (top shield plate) Specifications subject to change n 1.35 (0.053) 5.51 (0.217) 0.7±0.1 (0.0281±0.004) 1±0.1 (0.139±0.004) 2±0.1(0.079±0.004) 2 x (11-1)=20 (0.787) 21.15 MAX. (0.833) 3.45±0.2 (.0136±0.008) 15 (0.591) 4.5 MAX. (0.177) (16.2) [0.638] 1 (0.039) 2±.1 (.079±.004) 0.40-0.1 (0.0160-0.004 ) , 2 x (11-1)=20 (0.787) 21.15 MAX. (0.833) 1 (0.039) 5.35±0.1 (0.211±0.004) 2±0.1(0.079±0.004) 3.45±0.2 (.0136±0.008) 15 (0.591) 4.5 MAX. (0.177) 5.35±0.1 (0.211±0.004) 1±0.1 (0.139±0.004) 21.7±0.2 (0.854±0.008) Unit: mm (in.) ORDERING PART NUMBER: e n 0.7±0.1 (0.0281±0.004) 90º 90° 2±.1 (.079±.004) 0.40-0.1 (0.0160-0.004 ) (16.2) [0.638] 21.7±0.2 (0.854±0.008) 0.4±0.05 (0.016±0.002) 0.4±0.05 (0.016±0.002) 10.85 (0.427) 6.7 (0.264) 4±0.2 (0.157±0.008) FCN-086J055-G/LSD-BCR (bottom shield plate) Dimensions are in millimeters (inches) www.fcai.fujitsu.com 12 FCN-086 / 087 Series l ab ail av ts ar DISCONTINUED P rs be m Nu rt Pa ALTERNATE NO SOCKET: 95 CONTACTS n Dimensions 2 x (19-1) = 36 (1.417) 2 (.079) 10.95 (0.431) 0.3 (0.012) 2 2.35 (.093) (.079) 3.7 (0.146) 3.4 (0.134) n MOUNTING HOLE LAYOUT Thickness: 1.4 to 2.0 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6±0.05 mm (.024) 10.8 (0.425) 2 (.079) 2 x (19-1) = 36 (1.417) 2 (.079) 2 x (5-1) = 8 (.315) 11.4 (0.449) Section A-A Unit: mm (in.) 2±0.05 (.079±0.002) 2x (19-1)=36±0.05 (1.417±0.002) 5 .0 ±0 .6 02) Ø0 .0 4- ±0 11 24 (.0 2 x (6-1) = 10±0.05 (0.394±0.002) A 38 (1.470) 2±0.05 (.079±0.002) 20.2 (0.795) 2 2 (.079) (9.2)[0.362] (.079) b a 1.5±0.05 (.0.060±0.002) d A 2 x (5-1) = 8 (.315) e Unit: mm (in.) ORDERING PART NUMBER: FCN-086J095-G/101A-BCR FCN-086J095-G/111A-BCR (with pre-attached upper shield) n SHIELD PLATE n Dimensions n Dimensions 4 x (9-1)=32 (1.260) 6.7 (0.264) 4±0.2 (0.157±0.008) 15 (0.591) 4.5 MAX. (0.177) (16.2) [0.638] 1 (0.039) 2 x (19-1)=36(1.417) 37.15 MAX. (1.463) 0.7±0.1(0.0281±0.004) 1±0.1 (0.139±0.004) 2±0.1(0.079±0.004) 2 x (19-1)=36(1.417) 37.15 MAX. (1.463) Unit: mm (in.) Unit: mm (in.) n ORDERING PART NUMBER: FCN-086J095-G/VSD-BCR (top shield plate) Specifications subject to change 3.45±0.2 (0.158±0.008) 1 (0.039) 5.35±0.1 (0.211±0.004) 0.4±0.05 (0.016±0.002) 0.4±0.05 (0.016±0.002) (16.2) [0.638] ° 90 e 5.35±0.1 (0.211±0.004) 1±0.1 (0.139±0.004) 2±0.1(0.079±0.004) ) 2±.1 (.079±.004) 0.40-0.1 (0.0160-0.004 ) , 0.7±0.1(0.0281±0.004) 37.7±0.2 (1.484±0.008) 90û 2±.1 (.079±.004) 0.40-0.1 0 (0.016-0.004 15 (0.591) 4.5 MAX. (0.177) 10.85 (0.427) 4±0.2 (0.157±0.008) 1.35(0.053) 5.51 (0.217) 4 x (10-1)=36 (1.417) n ORDERING PART NUMBER: FCN-086J095-G/MSD-BCR (bottom shield plate) Dimensions are in millimeters (inches) www.fcai.fujitsu.com 13 FCN-086 / 087 Series l ab ail av rts DISCONTINUED Pa rs be m Nu rt Pa ALTERNATE NO SOCKET: 110 CONTACTS n Dimensions 48 (1.890) 2 x (11-1) = 20 (0.898) 2 (.079) 2 x (11-1) = 20 (0.898) 2 (.079) 10.95 (0.431) b (9.2)[0.362] 10.8 (0.425) a 2 2 (.079) (.079) 20.2 (0.795) d 2 x (11-1) = 20 (0.898) 2 (.079) 50 (1.969) 48 (1.890) 2 (.079) 2 x (5-1) = 8 (.315) 11.4 (0.449) 2 x (11-1) = 20 (0.898) 2 (.079) Unit: mm (in.) Thickness: 1.4 to 2.0 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6±0.05 mm (.024) 2±0.05 (.079±0.002) 2x (25-1)=48±0.05 (1.890±0.002) 5 .0 ±0 .6 2) Ø0 .00 5- ±0 13 24 (.0 Section A-A n MOUNTING HOLE LAYOUT 2 x (6-1) = 10±0.05 (0.394±0.002) 2±0.05 (.079±0.002) 1.5±0.05 (.0.060±0.002) 0.3 (0.012) e 2 x (5-1) = 8 (.315) 3.7 (0.146) 3.4 (0.134) 2.35 2 (.093) (.079) Unit: mm (in.) ORDERING PART NUMBER: FCN-086J110-G/101-BCR FCN-086J110-G/111-BCR (with pre-attached upper shield) SHIELD PLATE n Dimensions n Dimensions n 4 x (13-1)=48 (1.890) 4 x (12-1)=44 (1.732) 1.35(0.053) 5.51 (0.217) 4±0.2 (0.157±0.008) 0.4±0.05 (0.016±0.002) 6.7 (0.264) Unit: mm (in.) n ORDERING PART NUMBER: FCN-086J110-G/USD-BCR (with key, top shield plate) Specifications subject to change 15 (0.591) 4.5 MAX.(0.177) 0.7±0.1 (0.0281±0.004) 6.35±0.15 (0.25±0.006) 2 x (11-1)=20 (0.787) 1±.1(.039±.004) 2±.1(.079±.004) 3.45±0.2 0.4±0.05 (0.016±0.002) (16.2) [0.638] 1 (0.039) 5.35±0.1 (0.211±0.004) 2 x (11-1)=20 2 x (11-1)=20 (0.787) (0.787) 49.15 MAX. (1.935) 3.45±0.2 (0.158±0.008) 1±0.1 (0.139±0.004) 2±0.1(0.079±0.004) 1 (0.139) 2±.1 (.079±.004) 0.40-0.1 (0.0160-0.004 ) , 6.35±0.15 (0.25±0.006) 0.7±0.1 (0.0281±0.004) 90º 49.7±0.2 (1.957±0.008) e 5.35±0.1 (0.211±0.004) 2±.1 (.079±.004) 0.40-0.1 (0.0160-0.004 ) 90û 15 (0.591) 4.5 MAX. (0.177) 49.7±0.2 (1.957±0.008) (162) [6.378] 10.85 (0.427) 4±0.2 (0.157±0.008) 49.15 MAX. (1.935) 2 x (11-1)=20 (0.787) Unit: mm (in.) n ORDERING PART NUMBER: FCN-086J110-G/LSD-BCR (with key, bottom, shield plate) Dimensions are in millimeters (inches) www.fcai.fujitsu.com 14 FCN-086 / 087 Series SOCKET: 110 CONTACTS WITHOUT KEY l ab ail av ts ar DISCONTINUED P rs be m Nu rt Pa ALTERNATE NO n Dimensions 2 x (22-1) = 42 (1.654) 2 (.079) 3.7 (0.146) 3.4 (0.134) 0.3 (0.012) e d 2 x (5-1) = 8 (.315) 10.95 (0.431) 2.35 2 (.093) (.079) n MOUNTING HOLE LAYOUT Thickness: 1.4 to 2.0 mm (.055 to .220 in.) Drill hole Diameter: ∅0.7±0.025 mm (.028 in.) Through hole diameter (after plating): ∅0.6±0.05 mm (.024) 20.2 (0.795) 2 2 (.079) (.079) b 2 (.079) 2 (.079) 2 x (5-1) = 8 (.315) 11.4 (0.449) Section A-A Unit: mm (in.) 2±0.05 (.079±0.002) 2x (22-1)=36±0.05 (1.654±0.002) 5 0.0 .6± 2) ¿0 00 2- 0. 13 24± (.0 2 x (6-1) = 10±0.05 (0.394±0.002) 1.5±0.05 2±0.05 (.0.060±0.002) (.079±0.002) (9.2)[0.362] 44 (1.732) 2 x (22-1) = 42 (1.654) 10.8 (0.425) a Unit: mm (in.) ORDERING PART NUMBER: FCN-086J110-G/101A-BCR FCN-086J110-G/111A-BCR (with pre-attached upper shield) SHIELD PLATE n Dimensions n Dimensions n 4±0.2 (0.157±0.008) [ Unit: mm (in.) n ORDERING PART NUMBER: FCN-086J110-G/VSD-BCR (without key, top shield plate) Specifications subject to change n [ 0$; e 43.15 MAX. (1.699) 0$; (16.2) [0.638] 2±0.1(0.079±0.004) 2 x (22-1)=42(1.654) >@ 1 (0.039) 1±0.1 (0.139±0.004) º 90 , 0.7±0.1 (0.0281±0.004) 3.45±0.2 (0.158±0.008) 4.5 MAX. (0.177) 2±.1 (.079±.004) 0.40-0.1 (0.0160-0.004 ) 15 (0.591) 43.7±0.2 (1.720±0.008) 5.35±0.1 (0.211±0.004) 0.4±0.05 (0.016±0.002) 10.85 (0.427) 6.7 (0.264) 4 x (11-1)=40 (1.575) Unit: mm (in.) ORDERING PART NUMBER: FCN-086J110-G/MSD-BCR (without key, bottom shield plate) Dimensions are in millimeters (inches) www.fcai.fujitsu.com 15 FCN-086 / 087 Series l ab ail av rts DISCONTINUED Pa rs be m Nu rt Pa ALTERNATE NO SOCKET: 125 CONTACTS n Dimensions 2 x (25-1) = 42 (1.890) 2 (.079) 10.95 (0.431) e d 2 x (5-1) = 8 (.315) 3.7 (0.146) 3.4 (0.134) 0.3 (0.012) 2 2.35 (.093) (.079) 2 (.079) 2 (.079) 20.2 (0.795) b (9.2)[0.362] 2 (.079) n MOUNTING HOLE LAYOUT Thickness: 1.4 to 2.0 mm (.055 to .220 in.) Drill hole Diameter: ∅0.7±0.025 mm (.028 in.) Through hole diameter (after plating): ∅0.6±0.05 mm (.024) 2 (.079) 2 x (5-1) = 8 (.315) 11.4 (0.449) Section A-A Unit: mm (in.) 2±0.05 (.079±0.002) 2x (25-1)=48±0.1 (1.890±0.004) Unit: mm (in.) 5 0.0 .6± 2) ¿0 00 0- 0. 15 24± (.0 2 x (6-1) = 10±0.05 (0.394±0.002) 1.5±0.05 2±0.05 (.0.060±0.002) (.079±0.002) 50 (1.969) 2 x (25-1) = 48 (1.890) 10.8 (0.425) a ORDERING PART NUMBER: FCN-086J125-G/101-BCR FCN-086J125-G/111-BCR (with pre-attached upper shield) SHIELD PLATE n Dimensions n Dimensions 4 x (13-1)=48 (1.890) n ORDERING PART NUMBER: FCN-086J125-G/USD-BCR (top shield plate) (16.2) [0.638] 15 (0.591) 4.5 MAX. (0.177) 0.4±0.05 (0.016±0.002) Unit: mm (in.) 5.35±0.1 (0.211±0.004) 3.45±0.2 (0.158±0.008) 15 (0.591) 4.5 MAX. (0.177) 5.35±0.1 (0.211±0.004) 2±0.1(0.079±0.004) 2 x (25-1)=48(1.890) 49.15 MAX. (1.935) Specifications subject to change 1(0.039) 1 (0.039) 2±.1 (.079±.004) 0.40-0.1 (0.0160-0.004 ) , 90º 49.7±0.2 (1.957±0.008) e 1±0.1 (0.139±0.004) 90º 0.7±0.1 (0.0281±0.004) (16.2) [0.638] 49.7±0.2 (1.957±0.008) 2±.1 (.079±.004) 0.40-0.1 (0.0160-0.004 ) 0.4±0.05 (0.016±0.002) 10.85 (0.427) 6.7 (0.264) 4±0.2 (0.157±0.008) 1.35(0.053) 5.51 (0.217) 4 x (12-1)=44 (1.732) 4±0.2 (0.157±0.008) 3.45±0.2 (0.158±0.008) n 0.7±0.1 (0.0281±0.004) 1±0.1 (0.139±0.004) 2±0.1(0.079±0.004) 2 x (25-1)=48(1.890) 49.15 MAX. (1.935) Unit: mm (in.) n ORDERING PART NUMBER: FCN-086J125-G/LSD-BCR (bottom shield plate) Dimensions are in millimeters (inches) www.fcai.fujitsu.com 16 FCN-086 / 087 Series CODING KEY n Dimensions 6.1 (0.240) 2.35 (0.093) 5.75 (0.226) 6.55 (0.258) 2.2 (0.087) n Dimensions 9.2 (0.362) 2.9 (0.114) 3.8 (0.150) 7.9 (0.311) 3.15 (0.124) 6.75 (0.266) 2 (0.079) 8.9 (0.350) n ORDERING PART NUMBER: FCN-086A3568 n ORDERING PART NUMBER: FCN-086B1247 Quanties: 50 pieces/package; minium order quanity: 500 piecs n COMBINATION OF CODING KEYS Plug Jack Color Plug Jack Nut brown 1236 4578 Reseda green 2578 1346 Ultramarine blue 1238 4567 Slate gray 3467 1258 Strawberry 1248 3567 red Antique pink 3567 1248 Pastel orange Olive yellow 1268 3457 Color 3568 1247 Brilliant blue 1567 2348 n ORDERING PART NUMBERs: Plug Coding Key: FCN-086A**** Jack Coding Key: FCN-086B**** Specifications subject to change ****: Add Coding Key number: eg: FCN-086A1268 Dimensions are in millimeters (inches) www.fcai.fujitsu.com 17 FCN-086 / 087 Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. August 15, 2007 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 18