Need Emergency Power?
Trust HUBBELL!
The Hubbell Generator Transfer Switch is a 15 amp, single circuit, 125-volt manual
transfer switch for emergency load control.
▶ Provides power for critical equipment during a power outage.
▶ Ideal for use with any 15A, 125V circuit.
▶ Suitable for bonded-neutral or floating neutral generators*.
* Consult generator wiring instructions
Ordering Information:
Part #
GENSWITCH515**
15A 125V
NEMA 5-15R
UL/CSA
15A 125V
NEMA 5-15R
UL/CSA
** Complies with field evaluation requirements in Canada when labeled by an accredited IB.
The Hubbell GENSWITCH515 comes complete with:
Manual Transfer Switch
(with 36" factory
terminated wiring)
Steel Box
4" x 4" x 2.125" deep
Offset 1/2"
Conduit Nipple
2 x 1/2" NPT
Locknuts
2 x Wire
Connectors
2 x 6" Cable
Ties
How to Use:
1. Install as per provided installation instructions.
4. Transfer from “Normal” to “Emergency” mode.
2. When power is lost consult generator operating
instructions.
5. When power is restored, transfer from
“Emergency” to “Normal”.
3. Plug an appropriate sized extension cord from
the generator to the Hubbell Generator Manual
Transfer Switch.
Note: Always follow proper wiring instructions.
Hubbell Canada LP • Electrical Systems • 870 Brock Road South • Pickering, ON L1W 1Z8 • Phone (905) 839-1138 • FAX (905) 839-9108
Printed in Canada. Specifications subject to change without notice.
generatorswitch-datasheetREV7.indd 2
H3338 12/2015
16/12/2015 2:25:26 PM