LED-magic series
RGBW LED light engine instruction
Traditional LED light engine, the LED is compose by there LED chip of R/G/B. RGBW LED
light engine add white LED chip, the light engine is composed by 4 colors.
 1, Energy saving: white color from
RGB should light on 3 LED
chip(R/G/B), RGBW light engine only need to light W LED chip, save 1/3
energy.
 2, Pure white: white color from
RGB LED is not pure as RGBW
 3,Super white: all four
chips(R/G/B/W) light on, it’s supper
white, high brightness.
 4,Creative: you can make the colors
sequence of the color changing
yourself. Not fixed 7 color changing
Safe warning
1, Check supply voltage whether it matches the light engine
2,Prohibit to place the light engine under rain or wet spot, prevent from causing troubles or danger
of electronic shock
3,Light engine should be used in droughty surroundings, not stack other things around it
Remote control:
1. The lower left area, including red↑, red↓ green↑, green↓, blue↑,
DIY3. Use these keys to adjust colors.
blue↓, DIY1, DIY2,
For example, press DIY1, <initial DIY1 for RGB are semi-bright>, then press red↑, red↓ green
↑, green↓, blue↑, blue↓ to adjust the color. After selecting the color, press DIY1, the adjusted color is saved in DIY1 . Next time you press DIY1, the memorized color will appear. If press
red↑, red↓ green↑, green↓, blue↑, blue↓and then do not press DIY1, , the adjusted color
can’t be saved.
2. DIY jump function
This program is used to choose 2-10 using color (including standard colors and custom colors) to jump.
Specific operations are as follows:
Definition: Long press DIY Jump 3 seconds to enter setup
mode, then press the desired color, 2-10 colors (if press a
color twice continuously , then this color will be on continuous presentation twice, same as three times.) and then
press DIY Jump 3 seconds to save and complete the setup.
Invoking: Short press DIY Jump and enter into the program presentation.
3,
When fix in one color. it’s used to adjust the brightness of the color. When color changing, it’s
used to adjust the speed of color changing
4,OFF/ON : power off/on
5,White: white/ RGB/ RGBW( super white)
Jump3: jump change of seven colors
Jump7: dimming of seven colors
Fade3: gradual changing of seven colors
Fade7: gradual changing of seven colors
Spark: spark
RED/GREEN/BLUE/YELLOW/CYAN/PURPLE:
red/green/blue/yellow/cyan/purple