CARBURETORS
HELMETS
APPAREL
ROUND SLIDES
Snowmobile carbs contain 1.5 inlet seats for fuel pumps. Carbs are set with left side idle speed adjusting screw (except 38mm
carbs that have right side idle speed adjusting screws) and include modifications to starter (choke) system for cold weather
starting.
Order No.
VM30SN-E9966
VM34SN-E9867
VM38SN-E9878
VM44SN-E98301
Carb Size
30mm
34mm
38mm
44mm
Main
Jet
250
330
360
540
Pilot
Jet
40
30
40
35
Needle
Jet
159 P-5
159 Q-0
166 Q-0
224 AA-5
Jet
Needle
6F5
6DH3
6DH3
7DH2
Slide
2.0
2.5
2.5
1.5
Choke
Type
Cable
Cable
Cable
Cable
HEADGEAR
SKIS/
STEERING
Retail
$99.95
116.95
133.95
158.95
TRACTION
TRACKS
SUSPENSION
TM SERIES FLAT SLIDES
DRIVE
BELTS
TM carburetor provides significant performance improvements over older design round slide carburetors. Air flows faster and smoother
through the TM Series venturi due to the flat slide configuration and the jet blocks which help create a smooth bore effect. The high
velocity of the air flow means a stronger vacuum at the jet needle, providing more precise metering and better throttle response.
DRIVE
POWER JET KITS
The TM Series bodies are designed to accept Power Jet Kits. Power Jet Kits are normally used on carburetors in two-stroke engine
applications to prevent leaning out during extended full-throttle running.
For Power Jet Kits see below.
ENGINE
ELECTRICAL
CONTROLS
TMX SERIES RADIAL FLAT SLIDES
Order No.
13-0109-E98421
13-0110-E98421
Mikuni TMX Carburetor features a radial flat slide design working in a smoothbore venturi that establishes a new performance standard for improved throttle response, along with a wider and stronger overall powerband from the engine.
These performance gains are provided by the radial flat slide throttle valve design which produces a 40% greater boost
signal from the air flowing past it for better throttle response and an increased sensitivity to tuning. Very minimum
tuning changes are able to produce noticeable results in engine performance.
AIR/FUEL
Carbs contain 1.8 inlet seats for fuel pumps.
WINDSHIELDS
Carb
Type-Size
TM 38mm
TMX 38mm
Main
Jet
340
340
Pilot
Jet
25
25
Needle
Jet
389 Q-2
Fixed
Jet
Needle
6FJ40
6EJ12-57
Slide
4.0
4.0
Choke
Type
Cable
Cable
Retail
$188.95
188.95
Converts standard round or flat slide carbs to power jet carbs. Power jets deliver fuel at high RPM’s allowing a reduction in the main jet of about 25%. This yields a better mid-range setting and better fuel-air mixture at the top end for
more power and improved economy (mpg).
ACCESSORIES
Description
For 30-44mm carbs - with #80, 100 and 120 stock jet
SHOP
Retail
$24.50
TRAILER
ADDITIONAL POWER JETS
Order No.
N102/221-E9910
COVERS
LUGGAGE/
SURVIVAL
POWER JET KITS
Order No.
PJK36-E9441
CHEMICALS
ATV/UTV
ACCESS.
Description
Specify Size - 50-190 (increments of 2.5), 195, 200, 220
Retail
$3.50
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
MERCHANDISING
775
HELMETS
CARBURETOR
DIMENSIONS
APPAREL
HEADGEAR
SKIS/
STEERING
TRACTION
TRACKS
Dimension
(mm)
SUSPENSION
DRIVE
BELTS
Position of Throttle
Adjuster and Air Screw
Weight (gr.)
Material
DRIVE
ENGINE
VM28
35
33
10
4
49
44
7
6
44
72
66
54
Left
Right
550
A1
A
B
C
D
E
F
G
H
I
J
K
L
Throttle Adjuster
Air Screw
VM30
40
38
8
4
44.5
48
9
8
57.5
83.4
69.7
67
Left
Right
800
A1
VM32
40
38
8
4
44.2
57.8
7
6
57.5
83.4
75
67
Left
Right
770
A1
MODEL
VM34
40
41
8
4
44.5
48
9
8
57.5
83.4
69.7
67
Left
Right
750
A1
VM36
43
41
8
4
49
67
9
8
62
79.4
79
73
Left
Right
850
A1
VM38
43
41
8
4
49
67
9
8
62
79.4
81
73
Right
Right
830
A1
g
27.5
23
25.0
25.0
28
32
25.5
h
17.5
15
15
15
15
15
15
i
35
37
40
43
43
52
52
VM40
52
50
8
4
49
67
9
8
70
79
93
99.5
Left
Right
1020
A1
ELECTRICAL
RUBBER FLANGE
DIMENSIONS
CONTROLS
(Millimeters)
AIR/FUEL
CHEMICALS
WINDSHIELDS
COVERS
Model
VM28/200
VM30/200
VM34/200
VM36/200
VM38/200
VM40/200
VM44/200
a
60
(HR) 57.2
60
70
(HD) 74.6
(HD) 74.6
84
b
8.5
8.5
8.5
8.5
8.5
8.5
8.5
c
10
10
10
10
10
10
10.5
d
60
58
60
60
60
68
67
e
31
31
37
39.5
38
47
47
f
29.5
30
35.5
38.5
38
46
46
Remarks
VM26-28
VM26-28
VM30-34
VM36-38
VM36-38
VM40-44
VM40-44
For carburetor flange applications and prices see pages 787-794.
ACCESSORIES
LUGGAGE/
SURVIVAL
SUDCO
SHOP
CARBURETOR
PRODUCTS
CATALOG
TRAILER
ATV/UTV
ACCESS.
MERCHANDISING
A complete guide to Mikuni carburetors, components, fuel pumps and accessories. 30 pages of
information.
No. 11-3955-E9520
776
TUNING
MANUAL
POCKET TUNER
If you work on snowmobiles or cycles you need this
book. Complete parts lists plus instructions and
tuning tips. 92 pages of easy to read information.
$4.95 No. MM36-E9590
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
$15.95
for all Mikuni Carburetors
Proper main jet size calculator for temperature or
elevation change.
No. 8173-E9330
$5.50
HELMETS
TM FLAT SLIDE
CARBURETOR
APPAREL
HEADGEAR
SKIS/
STEERING
TRACTION
TRACKS
Ref No.
31.
32.
33.
34.
35.
36.
37.
38.
Ref No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Part No.
VM26/116
VM29/47
VM38/153
CW2-0310
VM38/152
VM20/369
(see MM36 manual)
(see MM36 manual)
VM832 2.5, VM832 4.0
VM38/159
(not available)
VM38/132
VM34/274
VM38/144
VM38/145
VM30/160
VM36/15
VM26/42
(see MM36 manual)
VM24/236
VM34/374
TM32/02-60
TM32/02-80
TM32/02-100
(not available)
CW2-0416
VM2719
VM26/227
VM28/254
VM28/817
VM28/253
VM35/40
(not available)
N2-04
603-68001
BDC36/35
VM26/46
VM18/228
Description
complete starter system TM28
complete starter system TM32, 34, 36, 38
nylon ring TM36, 38
screw w/lock washer all TM’s
cable connector
e-ring all TM’s
jet needle
throttle valve TM28, 32, 34
throttle valve TM36, 38
idle rod TM36, 38*
mixing chamber top
screw, jet block all TM’s
washer all TM’s
jet block TM38 left
jet block TM38 right
float pin all TM’s
float arm TM32-TM38*
cap, float pin guide all TM’s
pilot jet
float TM32-TM38
gasket, float chamber TM32-TM38
float chamber body TM32
float chamber body TM34
float chamber body TM36, 38
plate, hose retaining
screw w/lock washer TM28
screw w/lock washer TM32-38
o-ring TM28
o-ring TM32-TM38
drain plug TM28
drain plug TM32-TM38
cap, idle adjuster TM36-TM38*
packing
nut TM36, 38*
idle adjuster TM36, 38
(not applicable for TM28-TM34)
nut TM36, 38*
rubber cap TM28
rubber cap TM32-TM3
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
Part No.
CW2-412
M18F/439
VM36/83
B30/247
776-19002
VM28/1045
VM38/127
730-15001
VM2750
(see MM36 manual)
VM28/429
VM34/454
(see MM36 manual)
VM24/559
KV/10
VM24/557-2.5
VM38 3.3
VM38 1.5
VM38 1.8
786-46001-2.0
VM38 3.5
VM24/560
C2-0408
C2-0406
(not available)
VM28/1044
(not available)
BV15/27
CW2-0412
VM20/584
VM2720
(VM20/305)
M12F/46A
VM12/33
N133/037
(see MM36 manual)
(not available)
VM17/1002-15
VM17/1002-60
VM17/1002-80
603-27002
VM15/112
VM14/75
BV32/04
VM14/87
Description
SUSPENSION
screw w/lock washer all TM’s
cable adjuster TM28
cable adjuster TM32-TM38
locknut all TM’s
mixing chamber top TM36-TM38*
gasket, top TM28
gasket, top TM36-TM38
spring, throttle valve TM28
spring, throttle valve TM36-TM38*
needle jet
ring, main jet TM28
ring, main jet TM32-TM38
main jet
o-ring TM28
o-ring TM32-TM38
needle & seat assy. TM28
needle & seat assy. TM32-TM38
needle & seat assy. options
needle & seat assy. options
needle & seat assy. options
needle & seat assy. option
plate, needle valve all TM’s
screw TM28
screw TM32-TM38
vent hose
gasket, front cover TM28
front body, air intake
bolt TM38*
screw all TM’s
air screw, pilot TM28
air screw, pilot TM32-TM38
DRIVE
BELTS
DRIVE
ENGINE
ELECTRICAL
CONTROLS
AIR/FUEL
CHEMICALS
WINDSHIELDS
COVERS
spring, pilot air screw all TM’s
washer, pilot air screw TM32-TM38*
o-ring, pilot air screw TM32-TM38*
air jet
overflow hose
starter jet TM28
starter jet TM32
starter jet TM34-TM38
idle stop screw TM28*
spring, idle screw TM28*
o-ring TM28
o-ring TM32-34*
washer TM28*
*Not available or applicable to other models.
NOTE: Flatslide carburetor parts can be ordered by locating a similar part
in the above diagram and looking up the corresponding part.
All numbers in BLUE are new for this year.
LUGGAGE/
SURVIVAL
SHOP
TRAILER
ATV/UTV
ACCESS.
MERCHANDISING
For Order No. and Price List, see Mikuni parts on pages 779-782.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
ACCESSORIES
777
CARBURETOR
HELMETS
APPAREL
HEADGEAR
SKIS/
STEERING
TRACTION
TRACKS
SUSPENSION
DRIVE
BELTS
DRIVE
ENGINE
ELECTRICAL
CONTROLS
AIR/FUEL
CHEMICALS
WINDSHIELDS
COVERS
ACCESSORIES
LUGGAGE/
SURVIVAL
SHOP
TRAILER
ATV/UTV
ACCESS.
MERCHANDISING
Ref.
No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
35a.
36.
37.
38.
39.
40.
41.
42.
43.
44.
778
Description
throttle cable rubber cap
cable adjuster
cable adjuster locknut
mixing chamber top
mixing chamber top gasket
throttle valve spring
spring seat plate
needle positioning clip
needle
throttle valve
needle jet
starter plunger rubber cap
starter plunger fitting
starter lever
starter lever spring plate
starter plunger spring
starter plunger
mixing chamber body
float bowl gasket
float bowl baffle plate
pilot jet
float arm hinge pin
float arm
float
float bowl
main jet plug washer
main jet plug
air jet
air adjusting screw
air adjusting screw spring
idle adjusting screw spring
idle adjusting screw
needle valve washer
needle valve
main jet ring
washer
main jet
vent tube anchor plate
float bowl screw
guide screw
needle jet setter
needle jet setter o-ring
washer, banjo belt
banjo belt
rubber flange adapter
All numbers in BLUE are new for this year.
For Order No. and Price List, see Mikuni parts on pages 779-782.
Ultra Dealers Buy For Less - Ask Us About It
ORIGINAL PARTS
HELMETS
1. THROTTLE CABLE RUBBER CAP
Order No.
VM26/46-E9900
Application
All Mikuni Carburetors
Retail
$1.59
9. NEEDLE (see Mikuni manual no. MM36)
1a. COMPLETE STARTER SYSTEM, TM Flatside
Order No.
VM29/47-E9150
TM38/57-E9940
Application
TM32, 34, 36, 38
TMX35/38, TMS38
APPAREL
Retail
$7.95
7.75
Order No.
5 series-E9920
6 series-E9920
Sizes
5DP7, 5F21, 5F3, 5L1
6DH2, 6DH3, 6DH4, 6DH7, 6DH8,
6DJ30, 6DP1, 6DP17, 6EJ12-57, 6F15,
6F21, 6F4, 6F5, 6F8, 6F9, 6FJ40, 6FJ41,
6FJ6, 6FM46, 6L1, 6N1
7DH2, 7DH3, 7DH5, 7F7, 7F8
7 series-E9140
2. CABLE ADJUSTER
Order No.
11-2344-E9210
VM28/256-E9320
VM221-E9730
VM38/152-E9140
Application
6mm Cable Housing
7mm Cable Housing
45° Angle Adjuster
VM221 includes rubber cap
Retail
$2.25
3.90
TM36 and 38mm
$6.95
TM CABLE CONNECTOR
4. MIXING CHAMBER TOP WITH GASKET
Order No.
VM26/56-E9540
VM34/27-E9640
VM36/09-E9721
VM44/05-E9721
Application
All 22 thru 24mm
All 30 thru 34mm
All 36 and 38mm
All 40 and 44mm
5. MIXING CHAMBER TOP GASKET
Order No.
VM28/549-E9810
Application
29mm Smoothbore
6.25
Retail
$7.70
7.70
20.95
21.20
Retail
$3.15
NEEDLE SHIMS
HEADGEAR
Retail
$4.95
4.95
6.95
(sold 12/pkg.) .106” Diameter x .25” outer diameter x.020” (.5mm) thick
11-7758-P9720
$4.75
VM34/55-E9810
VM44/13-E9250
VM2750-E9340
DRIVE
10. THROTTLE VALVE (SLIDE)
Order No.
VM34/110-E9751
VM36/36-E9332
VM38/24-E9302
VM38/52-E9302
VM40/02-E9923
VM44/23-E9322
VM832-E9062
Specify Cutaway Size
1.5, 2.0, 2.5, 3.0
2.5, 3.0
1.5, 2.0, 2.5, 3.0
2.5, 3.0
1.5, 2.5, 3.5
1.5, 2.5, 3.5
Fits: TM36FS & TM38FS
2.5, 4.0
Idle Position Retail
$26.95
left
38.95
left
33.95
right
33.95
left
55.50
left
37.60
left
–
43.50
Retail
$2.80
3.25
3.25
8.75
7.35
Retail
$3.10
VM35/09-E9110
VM44/09-E9020
Application
28mm Spigot
30-34mm Spigot
32-34mm Flange
36-38mm Spigot
40-44mm Spigot
VM38/153-E9710
TM36 and 38mm
$2.95
TM NYLON RING
2.75
1.95
3.55
Application
All needles, Order 10/bag
ELECTRICAL
CONTROLS
CHEMICALS
Obtain proper applications from Mikuni manual part no. MM36.
WINDSHIELDS
11. NEEDLE JET
Order No.
159-E9280
169-E9280
175-E9280
176-E9280
224-E9201
247-E9280
261-E9280
389-E9280
480-E9280
Size (#)
Retail
O-4, O-8, P-0, P-2, P-4, P-5, P-6, P-8,
$13.95
Q-0, Q-2, Q-4, Q-5, Q-6, Q-8
13.95
O-8, P-2, P-5
13.95
P-6, P-8
N-0, N-2, N-4, N-8, O-0, O-4, O-5, R-2, R-4,R-6 13.95
16.95
AA-0, AA-5, BB-0, BB-5, Z-5
13.95
P-4, P-6, P-8, Q-0, Q-2, Q-4, Q-8
13.95
O-8
13.95
Q-2, Q-4, Q-6, Q-8, R-2, R-4 - Fits TM38GS
13.95
P-2, P-4, P-6, P-8, Q-0, Q-2, Q-4, Q-6, Q-8
30 thru 44mm Spigot w/24 thru 34mm Flange
Retail
$1.35 ea.
Order No.
VM20/455-E9700
Retail
$1.35
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
COVERS
ACCESSORIES
LUGGAGE/
SURVIVAL
SHOP
TRAILER
12. STARTER PLUNGER RUBBER CAP
8. NEEDLE POSITIONING CLIP
Order No.
VM20/369-E9700
ENGINE
AIR/FUEL
7. SPRING SEAT PLATE
Order No.
VM28/132-E9810
VM34/31-E9610
TRACKS
DRIVE
BELTS
6. THROTTLE VALVE SPRING
Application
28mm Spigot
30 thru 34mm Spigot
32 and 34mm Flange
All 36 and 38mm Spigot
All 40 and 44mm Spigot
36-38mm Flatslide
TRACTION
SUSPENSION
Obtain proper applications from
Mikuni manual part no. MM36.
NOTE: For round slide carbs gasket comes with mixing chamber top.
Order No.
VM28/58-E9610
VM34/50-E9810
SKIS/
STEERING
779
ATV/UTV
ACCESS.
MERCHANDISING
ORIGINAL PARTS
HELMETS
APPAREL
HEADGEAR
SKIS/
STEERING
TRACTION
TRACKS
SUSPENSION
DRIVE
BELTS
DRIVE
ENGINE
21. PILOT JET (Order 4/pkg.)
13. STARTER PLUNGER FITTING
Order No.
VM20/456-E9710
Application
30 thru 44mm Spigot
24 thru 34mm Flange
CABLE TYPE
30 thru 44mm Spigot
24 thru 34mm Flange
VM15/37-E9710
$2.95
Order No.
VM22/210-E9910
$2.95
14. STARTER LEVER
Order No.
VM32/53-E9260
Application
30 thru 44mm Spigot
30 thru 34mm Flange
$10.50
16. STARTER PLUNGER SPRING
Order No.
VM14SC11/89-E9900
VM15SC6/89-E9010
Application
26 thru 44mm Spigot
24 thru 34mm Flange
17. STARTER PLUNGER
Order No.
VM15SC4/85-E9920
VM18/144-E9920
VM38/06-E9570
VM14SC11/99-E9900
Type Application
cable 30 thru 44mm Spigot
lever 30 thru 44mm Spigot
pull-up 36 thru 44mm Spigot
RETAINING CLIP
for VM38/06 plunger
Converts cable operated chokes to lever type.
Order No.
VM350-E9921
Includes no. 12-17
Application
Most Mikuni Carbs,
Sizes: #10, 15, 17.5, 20, 22.5,
25, 27.5, 30, 32.5, 35, 37.5,
40, 45, 50, 55, 60, 65, 70, 75,
80, 85, 90, 95, 100, 110
Retail
$3.50
Retail
VM28/486
Order No.
VM28/486-E9910
Retail
$1.65
1.85
Retail
$4.90
4.90
12.75
$1.65
18. LEVER STARTER SYSTEM (Complete)
ELECTRICAL
VM22/210
Retail
Application
’73-78 Z1, GS750,
Sizes: #15, 17.5, 20, 25, 30, 35,
40, 45, 50, 55, 60, 65
Retail
$3.50
BS30/96
Order No.
BS30/96-E9910
Application
Most OEM CV Carbs,
Sizes: #30, 35, 37.5, 40, 42.5, 45,
47.5, 50, 52.5, 55, 57.5, 60
Retail
$3.50
M28/1001
Order No.
M28/1001-E9910
Application
22 flange, 2 cycle Banshee, Blaster, RZ,
YSR50, 1000cc
Sizes: #15, 17.5, 20, 25, 27.5, 30,
32.5, 35, 37.5, 40, 42.5, 45, 47.5, 50,
55, 65, 70
Retail
$19.95
Retail
$3.50
CONTROLS
N224/103
Order No.
N224/103-E9820
AIR/FUEL
Application
TMX36 carbs
Sizes: #20, 22.5, 25, 27.5, 30, 32.5,
35, 37.5, 40, 45, 50, 55, 60, 65
CHEMICALS
Retail
$4.40
22. FLOAT ARM HINGE PIN
Order No.
BV26/22-E9900
WINDSHIELDS
18a. CHOKE CONVERSION KIT
COVERS
Includes all parts necessary to convert lever operated choke carburetors (3044mm) to cable operation.
Retail
ACCESSORIES Order No.
L458-E9750
$9.95
LUGGAGE/
SURVIVAL
SHOP
TRAILER
ATV/UTV
ACCESS.
MERCHANDISING
19. FLOAT BOWL GASKET
Order No.
VM28/129-E9320
VM30/103-E9620
VM36/20-E9320
VM30/172-E9220
VM30/257-E9420
VM34/374-E9320
TM38/52-E9420
Application
28mm Spigot
26mm thru 34mm Flange
36 thru 44mm Spigot
30mm Small Body Spigot
33mm Smoothbore
36-38mm Flat Slide
35-38mm TMX
Retail
$3.90
3.90
3.95
3.85
4.25
3.90
4.20
20. FLOAT BOWL BAFFLE PLATE
Order No.
VM36/16-E9570
780
Application
36 and 38mm Spigot
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
Retail
$12.75
VM30/160-E9110
Application
26 thru 44mm Spigot
24 thru 34mm Flange
28-38mm Flat Side
Retail
$1.65
1.95
23. FLOAT ARM
Order No.
VM28/59-E9120
VM28/166-E9830
VM34/41-E9810
VM34/73-E9830
VM36/15-E9830
Application
26 thru 34mm Flange
28mm Spigot
30 thru 34mm Spigot (33mm wide)
30 thru 34mm Spigot (39mm wide)
36 thru 44mm Spigot
36-38mm Flatslide
Retail
$3.60
6.45
3.25
6.45
6.45
24a. FLOAT
Independent type - non corrosive plastic compound.
Standard in 26-44mm Spigot and Flange type carburetors.
Order 2/carb.
Order No.
VM28/164-E9570
VM34/61-E9640
VM24/236-E9650
Application
26 and 28mm Spigot
30 thru 34mm Spigot w/baffle plate
36 thru 44mm Spigot
Retail
$12.75
7.70
9.35
ORIGINAL PARTS
33. NEEDLE VALVE WASHER
24b. FLOAT
Twin Float Type - Brass, std. in 18-24mm Flange and Clamp-on Carbs.
Order No.
Application
Retail
VM24/171-E9570
$12.80
24-26mm Flange Type
Order No.
B34/52-E9700
VM26/25-E9600
Application
30 thru 44mm Spigot
24 thru 30mm Flange
28mm Spigot
HELMETS
Retail
$1.35
1.15
34. NEEDLE VALVE -Needle and Seat Assembly
HEADGEAR
25. FLOAT BOWL - Standard Type
Order No.
VM34/68-E9152
VM36/07-E9152
Application
30-34mm Spigot Type
36-38mm Spigot Type
VM26/26
Order No.
VM26/26-E9801
26. MAIN JET PLUG WASHER
Order No.
VM28/134-E9800
VM28/254-E9900
Application
28, 40 and 44mm Spigot
29mm Smoothbore
Application
28, 40 and 44mm Spigot
30 thru 34mm Spigot
29mm Smoothbore
Retail
$4.20
6.45
6.45
28. AIR JET
Application/Sizes
.5, .7, .8, .9, 1.0, 1.2, 1.3, 1.5, 2.0
VM2720-E9910
Application
26mm thru 44mm Spigot
24 thru 34mm Flange
32-38mm Flatside
$18.25
Order No.
VM28/163-E9801
Application
30 thru 44mm Spigot
32 and 34mm Flange
Sizes 1.5, 2.0, 2.5, 3.0
VM34/39 3.3-E9801 30 thru 44mm Spigot
32 and 34mm Flange
(3-hole)
VM28/511 1.5-E9321 30 thru 38mm Spigot
(with Viton tip)
Retail
$3.50
Retail
$4.20
3.35
Application
30 thru 44mm Spigot (6-hole)
18.25
20.50
Application
26 thru 44mm Spigot
24 thru 34mm Flange
36-38mm Flatslide
ENGINE
ELECTRICAL
CONTROLS
Retail
$24.95
AIR/FUEL
CHEMICALS
WINDSHIELDS
30. AIR ADJUSTING SCREW SPRING
Order No.
M12F/46A-E9010
DRIVE
BELTS
DRIVE
9mm hex with
10mm threads
Order No.
VM38/11 3.5-E9541
TRACKS
$18.25
VM38/11
Retail
TRACTION
SUSPENSION
9mm hex with
10mm threads
29. AIR ADJUSTING SCREW
Order No.
VM20/214-E9520
Retail
VM28/163, VM34/39
Meters air to needle jet for fine tuning 26-44mm Spigot carbs.
Order No.
BS30/97-E9910
Application
24 thru 30mm Flange
28mm Spigot
Sizes 1.5, 2.0, 2.5, 2.8
Retail
$1.50
1.65
27. MAIN JET PLUG
Order No.
VM28/133-E9520
VM34/42-E9830
VM28/253-E9830
SKIS/
STEERING
10mm hex with
9mm threads
Retail
$41.95
41.95
APPAREL
Retail
Order No.
VM38-E9801
$1.85
Application
all TM Flatslides (except TMX model)
Sizes 1.5, 1.8, 3.3, 3.5
Retail
COVERS
$18.25
ACCESSORIES
31. IDLE ADJUSTING SCREW SPRING
Order No.
M20/11-E9010
Application
26 thru 44mm Spigot
24 thru 34mm Flange
10mm hex with
10mm threads
Retail
$1.85
N122/032
Order No.
N122/032 2.5-E9911
32. IDLE ADJUSTING SCREW
Order No.
VM22/171-E9520
VM24/224-E9520
VM28/142-E9520
Application
30mm Flange
36 and 38mm Spigot
28, 34, 40 & 44mm Spigot
24 thru 34mm Flange
30mm Spigot
Retail
$4.20
4.20
4.20
LUGGAGE/
SURVIVAL
Application
29mm Smoothbore
Retail
$18.95
TRAILER
35. MAIN JET RING
Acts as a cup around the main jet to prevent breaking and bubbling
of fuel when crossing rough terrain or leaning the vehicle.
Order No.
VM28/228-E9150
VM36/17-E9880
Application
28, 40 and 44mm Spigot
30 thru 38mm Spigot
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
SHOP
ATV/UTV
ACCESS.
Retail
$8.50
14.85
781
MERCHANDISING
ORIGINAL PARTS
HELMETS
APPAREL
HEADGEAR
Application
All Mikuni Carburetors
without main jet ring
4042
TRACTION
SUSPENSION
DRIVE
BELTS
Retail
$1.15
36. MAIN JETS - Order all main jets 4/pkg.
SKIS/
STEERING
TRACKS
37. VENT TUBE ANCHOR PLATE
35a. MAIN JET WASHER
Order No.
VM20/169-E9600
Retail
$3.50
AIR/FUEL
Application
30 thru 44mm Spigot, 5mm x 16mm
32-38mm Flatslide, 5mm X 18mm with
lock washer
Retail
$1.00
1.00
39. GUIDE SCREW
40. NEEDLE JET SETTER
ENGINE
CONTROLS
Retail
$2.25
Comes in certain carburetors only. It extends the needle jet to allow a larger
needle to operate without hitting the main jet. It also performs the same
function as a main jet ring.
Order No.
Application
Retail
VM38/09-E9540
38mm Spigot with
$7.50
Needle Jet Series #166
DRIVE
ELECTRICAL
Application
28 thru 44mm Spigot
38. FLOAT BOWL SCREW - Order 5/pkg.
Order No.
C2-0518-E9500
VM2719-E9500
Replaces
Mikuni no.
4/042
Order No.
Application
4042-E9910
Large Hex Type
Sizes: 85, 90, 95, 100, 110, 115, 120, 125, 130, 135,
140, 150, 155, 160, 165, 170, 180, 185, 190, 200, 210,
220, 230, 240, 250, 260, 270, 280, 290, 300, 310, 320,
330, 340, 350, 360, 370, 380, 390, 400, 410, 420, 430,
440, 450, 460, 470, 480, 490, 500, 540, 560, 580, 600,
620, 640, 660, 680, 700
Order No.
VM28/79A-E9310
Holds the Needle Jet in position
Order No.
Application
VM28/53-E9310
26 thru 34mm Flange
N100/604
Order No.
Application
Retail
N100/604-E9910
Large Round Type, Used in smooth bores.
Sizes: 50, 52.5, 55, 57.5, 60, 62.5, 65, 67.5, 70, 72.5, 75,
77.5, 80, 82.5, 85, 87.5, 90, 92.5, 95, 97.5, 100, 102.5, 105,
107.5, 110, 112.5, 115, 117.5, 120, 122.5, 125, 127.5, 130,
132.5, 135, 137.5, 140, 142.5, 145, 147.5, 150, 152.5, 155,
157.5, 160, 162.5, 165, 167.5, 170, 172.5, 175, 177.5, 180,
$3.50
182.5, 185, 187.5, 190, 192.5, 195, 200
Retail
$2.25
41. NEEDLE JET SETTER “O” RING
Order 5/pkg.
Order No.
BV32/04-E9210
Application
22 thru 34mm Flange
Retail
$2.15
42. BANJO BOLT WASHER
Order 5/pkg.
CHEMICALS
Order No.
VM26/125-E9500
VM26/124-E9500
WINDSHIELDS
Application
22mm Flange
24 thru 34mm Flange
Retail
$1.00
1.00
M10/14
COVERS
ACCESSORIES
Order No.
Application
M10/14-E9910
Small Hex Type
Sizes: 110, 125, 140, 150, 155, 160, 180, 185, 190, 200
$3.50
LUGGAGE/
SURVIVAL
N102/221
ATV/UTV
ACCESS.
MERCHANDISING
Order No.
VM28/61A-E9830
Application
26 thru 34mm Flange
Retail
$6.45
TM FLATSLIDE
51. PILOT AIR SCREW WASHER
SHOP
TRAILER
43. BANJO BOLT
Retail
Order No.
Application
N102/221-E9910
Small Round Type
Sizes: 50, 52.5, 55, 57.5, 60, 62.5, 65, 67.5, 70, 72.5, 75,
77.5, 80, 82.5, 85, 87.5, 90, 92.5, 95, 97.5, 100, 102.5, 105,
107.5, 110, 112.5, 115, 117.5, 120, 122.5, 125, 127.5, 130,
132.5, 135, 137.5, 140, 142.5, 145, 147.5, 150, 152.5, 155,
157.5, 160, 162.5, 165, 167.5, 170, 172.5, 175, 177.5, 180,
182.5, 185, 187.5, 190, 195, 200, 220
782
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
Retail
Order No.
VM12/33-E9600
Order 5/pkg.
Application
TM32 thru 38mm
Retail
$1.15
52. PILOT AIR SCREW “O” RING
Order 5/pkg.
$3.50
Order No.
N133/037-E9700
Application
TM32 thru 38mm
Retail
$1.30
CARB REPAIR KITS
HELMETS
WALBRO CARBURETOR SERVICE PARTS
APPAREL
HEADGEAR
CARB REPAIR KITS
SKIS/
STEERING
for Mikuni Float Style Carburetors
Order No.
L452-K9540
L453-K9450
L454-K9750
Description
30mm carbs (zinc)
32mm carbs (zinc)
34mm carbs (zinc)
Retail
$7.60
8.95
9.95
TRACTION
TRACKS
COMPLETE REPAIR KIT
SUSPENSION
WF SERIES (Metering diagram not available.)
No. 300-794-E9443
DRIVE
BELTS
WF models (includes idle needle) $54.95
FUEL PUMP LEAF SPRING
No. 98-215-E9220
WD, WDA, WR, WRA
DRIVE
UNIVERSAL KITS
for Mikuni Carburetors
$3.95
Order No.
L433-K9960
L434-K9970
L435-K9960
Description
VM30, 32 & VM34 models (zinc)
VM36 & VM38 models (aluminum)
VM30, 32 & VM34 models (alum.)
ENGINE
Retail
$11.95
13.50
11.95
ELECTRICAL
CONTROLS
MIKUNI BUTTERFLY TYPE CARB
DIAPHRAGM AND GASKET SETS
AIR/FUEL
CHEMICALS
WINDSHIELDS
GASKET/DIAPHRAGM KIT
No. 92-534-E9942
No. L410-E9260
WD1-WD38 (all), WDA (all), WDB30,
WDB31, WR1-WR27 (all), WRA30,
$41.95
WRA37, WRD2
10.50
WR, WD, WDA (except WDA-1)
COVERS
Repair carbs on Rupp, Chaparral and Xenoah water cooled engines.
No. L405-K9950
$9.95
ACCESSORIES
LUGGAGE/
SURVIVAL
SHOP
TRAILER
ATV/UTV
ACCESS.
DIAPHRAGM and GASKET SET
KEIHIN CARBURETORS
No. L459-K9901
$17.95
Repair carbs on Rupp, Chaparral and Xenoah fan cooled engines.
No. 8812-K9950
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
$9.95
783
MERCHANDISING
FUEL SYSTEM
HELMETS
CARBURETOR KITS
APPAREL
for MIKUNI
BN34/38/44mm
HEADGEAR
SKIS/
STEERING
TRACTION
TRACKS
SUSPENSION
DRIVE
BELTS
11-0289
Fits Bombardier Sea Doo ’88-90; Fazor I/II/III ’87-90; Kawasaki JS300/SX
’86-91, JS400 ’76, JS440 ’77-90, JS550/SX ’82-90; Wet Jet, Sport II, Sport
II Spirit ’86-91; Yamaha WJ500 Wave Jammer ’87-90, WR500 Wave Runner
’87-89, WR650LX ’90.
GASKET and DIAPHRAGM KIT
No. 11-0289-K9990
Made in USA
CARBURETOR REPAIR KITS
TILLOTSON UNIVERSAL
$16.95
Includes metering needle.
COMPLETE CARB KIT
Genuine Mikuni complete with gaskets, diaphragms, check valves, washers,
o-rings, arm pin, spring and arm.
No. L465-E9761
No. L466-E9761
No. 11-1463-K9832
If needle with slot for fork is needed, order no L409 needle and seat.
Mikuni kit
$37.95
HR Series, replaces RK1HR
HD Series, replaces RK1HD
$27.95
27.95
DRIVE
ENGINE
METERING DIAPHRAGM
for TILLOTSON CARBS
ELECTRICAL
CONTROLS
No. L403-E9020
No. L404-E9020
All HD carbs
All HR/HL carbs
$3.50
3.50
AIR/FUEL
CHEMICALS
DIAPHRAGM and GASKET SETS
for TILLOTSON CARBS
WINDSHIELDS
No. L401-E9740
All HR carbs (DG1HR)
Replaces Rotax 404-0282-00
All HD carbs (DG1HD)
Replaces Rotax 404-0281-00
COVERS
No. L402-E9740
ACCESSORIES
RESILIENT NEEDLE,
SEAT and GASKET
SETS
$7.95
7.95
TILLOTSON APPLICATION
HL/HR replaces 233-660/233-672
LUGGAGE/
SURVIVAL
No. L406-E9530
$5.95
HD replaces 233-673
PLUGS
for TILLOTSON CARBS
SHOP
No. L407-E9740
No. L409-E9950
Order 20/pkg, priced each.
TRAILER
7.95
HD replaces 233-682 (Needle has slot for fork)
Made by MIKUNI
9.95
VM30 thru VM44 spigot carbs using fuel pumps
ATV/UTV
ACCESS.
HL/HR plug replaces 02531 .375” dia.
No. L397-E9200
$.60 ea.
HD plug replaces 04326 .440” dia.
MERCHANDISING
No. L398-E9200
784
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
No. VM28/163 #1.5-E9801
Made by WALBRO
$18.25
WR, WD and WDA models (needle only)
.60 ea.
No. 82-30-E9930
$6.75
CHAIN SAW CARBURETOR REPAIR KITS
Walbro Gasket and Diaphragm Kits with Inlet Needle
These kits are manufactured and packaged by Walbro Corporation.
HELMETS
APPAREL
HEADGEAR
SKIS/
STEERING
WALBRO SDC CARB
Fits: Walbro SDC carbs. Replaces repair kit no. K10 and gasket/ diaphragm
kit no. D10. Replaces no. 350-501/2.
WALBRO WT CARB
No. 11-3065-K9590
$15.95
No. 11-3069-K9980
TRACTION
$14.95
TRACKS
SUSPENSION
DRIVE
BELTS
DRIVE
WALBRO WA CARB
Walbro WB CARB
Fits: Walbro WA carbs. Replaces nos. 300-949, 350-534, 510, 512, 516,
521, 522, 530, 533, 541, 542, 543, 545, 548 and 558.
Fits: Walbro WB3A, WB3A/7A carbs.
No. 11-3070-K9270
No. 8099-K9740
$11.95
ENGINE
$7.95
WALBRO/TILLOTSON
INLET NEEDLES
ELECTRICAL
CONTROLS
AIR/FUEL
Helps eliminate troublesome leakage, improves idle
and overall performance.
Original Walbro parts.
WALBRO HDA CARB
CHEMICALS
Fits: Walbro HDA carbs. Replaces repair kit nos. K10, K11, K12 and gasket/
diaphragm kit nos. D10 and D11.
Walbro nos. 82-75 and 82-26. 16.5mm long style, fits WA, WT, HDC, SDC, WINDSHIELDS
WS, WB and many HDA carbs. Replaces Tillotson 34-188 (HU, HS and HL).
No. 11-3063-K9880
No. 8226-E9910
$14.75
$3.25 ea.
COVERS
ACCESSORIES
LUGGAGE/
SURVIVAL
ULTRA DEALERS BUY FOR LESS
Ask for Details
SHOP
SAVE FREIGHT
ORDER OVER $300
TRAILER
ULTRA DEALERS SAVE FREIGHT
WALBRO HDC CARB
Fits: Walbro HDC carbs. Replaces repair kit no. K10 and gasket/diaphragm kit
no. D10. Replaces no. 350-503 and 350-508.
No. 11-3068-K9960
ATV/UTV
ACCESS.
$11.50
MERCHANDISING
All numbers in BLUE are new for this year.
Call Toll Free: (800) 248-0136 or fax (800) 728-7999
785
CHAIN SAW CARBURETOR
GASKET and DIAPHRAGM KITS
HELMETS
CHAIN SAW
SERVICE
MANUAL
APPAREL
HEADGEAR
SKIS/
STEERING
TRACTION
Over 455 pages of everything you need to know to tear down, repair,
reassemble and adjust most popular chain saws. Covers Homelite,
Husqvarna, McCulloch, Poulan, Remington, Skil and Stihl, plus many
others including electric saws plus over 25 brands of gasoline saws.
TRACKS
TILLOTSON
SUSPENSION
Replaces: DG-1HU. Fits Carb model HU.
No. 8100-E9220
$3.95
No. 8346-E9122
$36.95
DRIVE
BELTS
DRIVE
ENGINE
BRIGGS & STRATTON
MANUAL
ELECTRICAL
CONTROLS
AIR/FUEL
CHEMICALS
WINDSHIELDS
TILLOTSON
Replaces: RK-17HS, no. 012910. Fits: Carb model HS. Includes:
welch plug, screen and inlet needle.
2-12.5 hp. aluminum L-head engines. Manual covers service, repair
and maintenance.
No. 8102-E9430
No. 11-2440-E9901
$5.95
$18.50
COVERS
ACCESSORIES
LUGGAGE/
SURVIVAL
SHOP
TRAILER
ATV/UTV
ACCESS.
MERCHANDISING
WALBRO IN TANK FUEL FILTERS
TILLOTSON
Replaces: DG-2HL. Fits: Carb model HL.
No. 8103-E9420
786
All numbers in BLUE are new for this year.
Ultra Dealers Buy For Less - Ask Us About It
$4.25
Fits up to 30cc engines with .125” fuel line.
No. 125-527-E9920
order 10/display
$4.95 ea.
Fits up to 80cc engines with .125” fuel line.
No. 125-528-E9240
order 10/display
$6.95 ea.