UltraStart® T8 Bi-Level Dimming Ballast Product Description Code Lamps Type 68966 GE132MVPS-NS30 F32T8 /U F28T8 F32T8/25W 68968 GE232MVPS-L-S30 F32T8/U F28T8 F32T8/25W 68967 GE232MVPS-N-S30 F32T8 /U F28T8 F32T8/25W Light Output # Input Watts Amps Ballast Harmonic Total 277V Crest Minimum Starting Factor Temp (Initial) System Lumens 120V 277V 120V 277V Factor 100% 30 29 0.26 0.12 0.88 5% 10% <1.7 0F 1 30% 12 13 0.11 0.06 0.25 10% 20% <1.7 32F 725 1 100% 25 26 0.22 0.10 0.87 5% 11% <1.7 32F 2327 1 30% 12 13 0.11 0.06 0.22 10% 21% <1.7 32F 589 1 100% 25 24 0.22 0.10 0.84 5% 11% <1.7 32F 2100 1 30% 12 13 0.11 0.06 0.23 10% 21% <1.7 32F 575 2 100% 52 51 0.46 0.20 0.78 5% 10% <1.7 0F 4524 2 30% 19 20 0.11 0.08 0.20 10% 19% <1.7 32F 1160 2 100% 47 47 0.42 0.18 0.80 5% 10% <1.7 32F 4280 2 30% 18 19 0.16 0.08 0.18 10% 20% <1.7 32F 963 2 100% 45 44 0.39 0.17 0.77 5% 10% <1.7 32F 3850 2 30% 19 19 0.16 0.08 0.23 10% 20% <1.7 32F 667 2 100% 59 57 0.51 0.22 0.88 5% 10% <1.7 0F 5104 2 30% 24 25 0.22 0.10 0.25 10% 17% <1.7 32F 1450 2 100% 51 50 0.45 0.19 0.87 5% 10% <1.7 32F 4655 2 30% 22 23 0.20 0.09 0.27 10% 18% <1.7 32F 1445 2 100% 49 48 0.42 0.18 0.84 5% 10% <1.7 32F 4200 1 120V GE Lighting 2552 UltraStart® T8 Bi-Level Dimming Ballast Dimming from 100% to 30% Wiring Instructions: • Line Voltage dimming Control • Connect either black lead to phase for 30% dimmed level , connect both leads to phase for 100% light level • For N-1 insulate blue lead to 600V rms • Install and ground per National Electric Code Transforming the POWER of LightTM GE National Customer Service Center 1-888-GEBALLAST (432-2552) For product specifications and application information, please consult GE’s Website: www.gelighting.com Information provided is subject to change without notice. Please verify all details with GE. All values are design or typical values when measured under laboratory conditions, and GE makes no warranty or guarantee, express or implied, that such performance will be obtained under end-use conditions. © 2013 GE 74409 03/2013 Printed in USA A New Generation of Ultra-Efficient Programmed Start Ballasts g imagination at work UltraStart® T8 Bi-Level Dimming Ballast GE UltraStart®T8 Bi-level dimming Ballasts are the newest addition to GE’s comprehensive family of controllable Lighting Ballast. The new category includes 2 lamp high efficiency normal and low ballast factor as well as a 1 lamp normal ballast factor. The ballast will reduce power by over 50% and easily switches from 100% to 30% light with 2 standard switches or a line voltage occupancy sensor like the GE Aware HB12 series. The GE UltraStart®T8 Bi-level dimming Ballasts are easily wired for control. Connect either black lead to phase for 30% level and connect both black leads to phase for 100% level when using switches. If using GE Aware™ HB 12 series line voltage occupancy sensors, connect either black lead to red load on the sensor. GE UltraStart®T8 Bi-level dimming Ballasts meet 2010 ASRAE/IES 90.1 requirement for light reduction White(Neutral) controls that should Black (Hot) be adopted by the United States November 2013. They also meet California Energy Efficiency Standards (Title 24). Great application for GE 1 lamp (GE132MVPS-N-S30) - Stairwells where light levels can be reduced when not needed GE UltraStart® T8 Bi-Level Dimming Ballasts GE UltraStart®T8 Bi-level dimming Ballasts are an effective energy management solution when you have the flexibility to reduce light levels in unoccupied spaces or can reduce light energy demand by over 50% at critical times throughout the day. Application Illustration only, subject lamps not used in photo. GE UltraStart Bi-level dimming ballast - Used in Hospital Patient rooms for aesthetic dimming as well as power reduction Perfect for Bi-Level Switching • 100% to 30% Bi-Level dimming • Use with line voltage occupancy sensors, lighting panel relays or two standard switches. Sufficient lighting, Flexible Operation Eliminates uneven light distribution and dark spaces caused when switching in rows, checkerboard patterns or using tandem wiring patterns. • • • • Application Illustration only, subject lamps not used in photo. GE Aware™ HB 12 Red(Load) White(Neutral) Blue Black 1 Red Black 2 Ballast Yellow Lamp Lamp • • • • • Normal Ballast factor ( .88) to low (.25) Low Ballast Factor ( .78) to low (.20) Multi-volt operation 108-305V Parallel lamp operation –when 1 lamp fails the others remain lit UL 131F Ambient rating UL type CC anti-arc rating Anti-striation circuitry NEMA Premium Product is compliant with material restriction requirements of RoHS An illustration of how much can you save with GE UltraStart® T8 BiLevel Dimming Ballasts Lamp Effective Watts % of Power 100 40 Total Time # of Buildings # of Fixtures Energy cost per kWh Hours per day Days per week Energy cost with control Energy cost without control Annual Energy Savings Energy Savings per fixture Energy Savings F28T8 40% % of Time 50 50 100% 8 1200 $0.12 14 5 17,200 24,600 7,400 $6.20 30% UltraStart® T8 Bi-Level Dimming Ballast GE UltraStart®T8 Bi-level dimming Ballasts are the newest addition to GE’s comprehensive family of controllable Lighting Ballast. The new category includes 2 lamp high efficiency normal and low ballast factor as well as a 1 lamp normal ballast factor. The ballast will reduce power by over 50% and easily switches from 100% to 30% light with 2 standard switches or a line voltage occupancy sensor like the GE Aware HB12 series. The GE UltraStart®T8 Bi-level dimming Ballasts are easily wired for control. Connect either black lead to phase for 30% level and connect both black leads to phase for 100% level when using switches. If using GE Aware™ HB 12 series line voltage occupancy sensors, connect either black lead to red load on the sensor. GE UltraStart®T8 Bi-level dimming Ballasts meet 2010 ASRAE/IES 90.1 requirement for light reduction White(Neutral) controls that should Black (Hot) be adopted by the United States November 2013. They also meet California Energy Efficiency Standards (Title 24). Great application for GE 1 lamp (GE132MVPS-N-S30) - Stairwells where light levels can be reduced when not needed GE UltraStart® T8 Bi-Level Dimming Ballasts GE UltraStart®T8 Bi-level dimming Ballasts are an effective energy management solution when you have the flexibility to reduce light levels in unoccupied spaces or can reduce light energy demand by over 50% at critical times throughout the day. Application Illustration only, subject lamps not used in photo. GE UltraStart Bi-level dimming ballast - Used in Hospital Patient rooms for aesthetic dimming as well as power reduction Perfect for Bi-Level Switching • 100% to 30% Bi-Level dimming • Use with line voltage occupancy sensors, lighting panel relays or two standard switches. Sufficient lighting, Flexible Operation Eliminates uneven light distribution and dark spaces caused when switching in rows, checkerboard patterns or using tandem wiring patterns. • • • • Application Illustration only, subject lamps not used in photo. GE Aware™ HB 12 Red(Load) White(Neutral) Blue Black 1 Red Black 2 Ballast Yellow Lamp Lamp • • • • • Normal Ballast factor ( .88) to low (.25) Low Ballast Factor ( .78) to low (.20) Multi-volt operation 108-305V Parallel lamp operation –when 1 lamp fails the others remain lit UL 131F Ambient rating UL type CC anti-arc rating Anti-striation circuitry NEMA Premium Product is compliant with material restriction requirements of RoHS An illustration of how much can you save with GE UltraStart® T8 BiLevel Dimming Ballasts Lamp Effective Watts % of Power 100 40 Total Time # of Buildings # of Fixtures Energy cost per kWh Hours per day Days per week Energy cost with control Energy cost without control Annual Energy Savings Energy Savings per fixture Energy Savings F28T8 40% % of Time 50 50 100% 8 1200 $0.12 14 5 17,200 24,600 7,400 $6.20 30% UltraStart® T8 Bi-Level Dimming Ballast Product Description Code Lamps Type 68966 GE132MVPS-NS30 F32T8 /U F28T8 F32T8/25W 68968 GE232MVPS-L-S30 F32T8/U F28T8 F32T8/25W 68967 GE232MVPS-N-S30 F32T8 /U F28T8 F32T8/25W Light Output # Input Watts Amps Ballast Harmonic Total 277V Crest Minimum Starting Factor Temp (Initial) System Lumens 120V 277V 120V 277V Factor 100% 30 29 0.26 0.12 0.88 5% 10% <1.7 0F 1 30% 12 13 0.11 0.06 0.25 10% 20% <1.7 32F 725 1 100% 25 26 0.22 0.10 0.87 5% 11% <1.7 32F 2327 1 30% 12 13 0.11 0.06 0.22 10% 21% <1.7 32F 589 1 100% 25 24 0.22 0.10 0.84 5% 11% <1.7 32F 2100 1 30% 12 13 0.11 0.06 0.23 10% 21% <1.7 32F 575 2 100% 52 51 0.46 0.20 0.78 5% 10% <1.7 0F 4524 2 30% 19 20 0.11 0.08 0.20 10% 19% <1.7 32F 1160 2 100% 47 47 0.42 0.18 0.80 5% 10% <1.7 32F 4280 2 30% 18 19 0.16 0.08 0.18 10% 20% <1.7 32F 963 2 100% 45 44 0.39 0.17 0.77 5% 10% <1.7 32F 3850 2 30% 19 19 0.16 0.08 0.23 10% 20% <1.7 32F 667 2 100% 59 57 0.51 0.22 0.88 5% 10% <1.7 0F 5104 2 30% 24 25 0.22 0.10 0.25 10% 17% <1.7 32F 1450 2 100% 51 50 0.45 0.19 0.87 5% 10% <1.7 32F 4655 2 30% 22 23 0.20 0.09 0.27 10% 18% <1.7 32F 1445 2 100% 49 48 0.42 0.18 0.84 5% 10% <1.7 32F 4200 1 120V GE Lighting 2552 UltraStart® T8 Bi-Level Dimming Ballast Dimming from 100% to 30% Wiring Instructions: • Line Voltage dimming Control • Connect either black lead to phase for 30% dimmed level , connect both leads to phase for 100% light level • For N-1 insulate blue lead to 600V rms • Install and ground per National Electric Code Transforming the POWER of LightTM GE National Customer Service Center 1-888-GEBALLAST (432-2552) For product specifications and application information, please consult GE’s Website: www.gelighting.com Information provided is subject to change without notice. Please verify all details with GE. All values are design or typical values when measured under laboratory conditions, and GE makes no warranty or guarantee, express or implied, that such performance will be obtained under end-use conditions. © 2013 GE 74409 03/2013 Printed in USA A New Generation of Ultra-Efficient Programmed Start Ballasts g imagination at work