SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
Regd OFF: Scope Minar, Laxmi Nagar, New Delhi – 110092
Admin OFF: Metro Railway Service Building, 4th. Floor, 56 Chittaranjan Avenue, Kolkata – 700012
; TEL: 033 – 22367158/59; FAX:033:22367159
Email address :srbwipl@yahoo.in
To
M/S_________________________
_____________________________
TENDER ENQUIRY NO. SRBWIPL/PUR /CRF/ BOXNHL(MBS) / 500 / 2016-17/01 dtd
03.05.2016
“Sealed Tenders are invited from RDSO approved vendor for supply of 500sets of CRF Section at
SRBWIPL Factory, Kulti as per latest RDSO drawing and specification required for manufacture
of 500 BOXNHL wagons”.
i)
ii)
iii)
iv)
Annexure – I : Schedule of Requirement
Annexure – II : Instruction to Bidders
Annexure – III : Special Terms and conditions
Annexure – IV : Price Format
1. Issue of Tender Documents : Any working day (except Saturday, Sunday & Holiday) between
10.00 AM to 05.00 PM from 03.05.2016 to 24.05.2016 against payment of Rs. 500.00 by Account
Payee Demand Draft drawn in favour of “SAIL RITES Bengal wagon Industry Pvt. Ltd.” and
payable at Kolkata towards cost of tender document along with their Bid .
2. Bidders who are interested to participate in the tender may also download the tender document
from our website www.srbwipl.com. Bidders quoting by downloading the tender document from
Website shall have to submit cost of the tender document along with the Bid . No offer shall be
accepted after closing of tender box at specified date & time.
3. Closing of Tender Box on 24.05.2016 at 14.30 hrs.
4. Tender Opening on 24.05.2016 at 15.00 hrs.
Sealed Tender, addressed to Business Manager, SAIL RITES Bengal Wagon Industry Pvt. Ltd., Metro
Railway Service Building, 4th. Floor, 56 Chittaranjan Avenue, Kolkata – 700012 may be dropped in our
Tender Box No. 1 ( in case of hand delivery) or may be sent by Registered post but must reach us
positively within 25.04.2016 up to 14.30 hrs. No offer shall be accepted after closing of the Tender Box in
whatsoever mode of receipt.
For SAIL RITES Bengal Wagon Industry Pvt. Ltd.
SWAPAN BASU
DGM/SRBWIPL
[Signature of Tenderer]
Page 1
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
Annexure – I
ANNEXURE ATTACHED
SCHEDULE OF REQUIREMENT
Sl.No.
Item Description / Specification
Quantity required
01
Cold Rolled Formed Sections (CRF) and CRF for 500 wagon sets
Single Piece Hat Section for Centre Sill (as per latest
RDSO drawing) for manufacture of BOXNHL (Design –
D) wagon. List of CRF items attached with Price Bid
format.
Reference Drawing No. WD-09034-S-22 Alt 8 and WD11058-S-01 Alt. 6 or latest.
RDSO Specification : WD-01-CRF-12
Material Specification -: IRS:M-44
NOTE – Only RDSO approved vendors as per Latest RDSO Vendor Directory for the tendered
item are technically eligible to quote. Tender Offers received from non RDSO
approved vendors shall be rejected by SRBWIPL.
Tenderer’s signature:................................................................
Designation:.............................................................................
Date:........................................................................................
Common Seal : .......................................................................
[Signature of Tenderer]
Page 2
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
ANNEXURE - II
INSTRUCTION TO BIDDERS
1.0
MODE OF SUBMISSION OF OFFER
1.1
Tenderer are required to submit their offer in one part only (Techno Commercial Bid &Price
Bid) in one sealed envelope. The tender offer is to be submitted on or before last date and
time of submission specified in the tender document.
1.2
Tenderer are required to superscribe the tender number, due date of submission specified in
the tender document .
2.0 CONTENT OF BIDS
2.1)Your Techno Commercial Bid must contain the following:
a) Cost of tender document.
b) Earnest Money Deposit in the form of Demand Draft / Pay order drawn in favour of “SAIL RITES
Bengal wagon Industry Private Limited” payable at Kolkata.
c)
List of clients to whom the tendered items have been supplied along with performance report.
Preferably, Performance Report should be submitted containing replacement / failure / warranty
claims from Customers.
d) VAT & CST Registration, ITR Acknowledgement for ay 2015-16 / PAN No. etc. must be submitted
by indigenous bidder.
e) Product catalogue consisting of technical details.
f) Copy of valid RDSO certificate in support of their claim for being a RDSO approved vendor for
supplying Cold Rolled Formed (CRF) section for BOXNHL wagon they are quoting.
g) Location of Factory and contact details.
h) Any other information as deemed fit.
i) Signed copy of RDSO Specification : WD-01-CRF-12 Alt – Latest & WD-09034-S-22 Alt 8 and WD11058-S-01 Alt. 6 or latest.
2.2) Your Price Bid is to contain
a) Price Format as per Annexure IV duly filled and signed.
b) Details of all taxes, duties applicable must be furnished.
[Signature of Tenderer]
Page 3
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
3.0 RATES
3.1 All rates, price in the tender form should be quoted both in figures and in words. Tenders
containing over written or erased rates are liable to be rejected.
3.2 All taxes and duties applicable must be quoted with respective rates and amount. It is clearly
understood that taxes and duties applicable as on date of bid opening and not indicated in the
price bid will be borne by the contractor. However, any statutory variation in rates and levy of
new taxes and duties after bid opening during the currency of contract will be to SRBWIPL
account with Supporting Documents.
3.3 Bidder must indicate freight charges for delivery of materials to SRBWIPL Factory,Kulti must be
indicated in the offer.
3.4 Bidders, while quoting the rates, shall take into account the entire credit availed on inputs under
MODVAT SCHEME introduced with effect from 01.03.1986. The tenderer should give
declaration that any / all set – off in respect of duties on inputs as admissible under the scheme
is being totally and unconditionally passed on to the purchaser in price quoted by them.
4.0 EXCISE DUTY (ED) & VALUE ADDED TAX (VAT)
4.1
4.2
i)
ii)
iii)
4.3
Excise duty will be reimbursed at actual against documentary evidence, present rate
being 12.5%. However, the liability of the Purchaser to reimburse Excise Duty is limited to
such sums as may be found legally due and payable in respect of contracted goods.
The claim for ED on each bill should be supported by the following certificates :
The rate of ED is ad-valorem. The Ed at present legally leviable in this case is
Rs.........................ie. __________% of Rs._______________, being the unit value of the
stores assessed by the concerned authority of the Excise Department.
Certificate that the ED charged on this bill is not more than that legally leviable and
payable under the provision of the relevant act or rules made there under.
Certified that the amount of Rs. ________________ claimed as ED in this bill is in
accordance with the provision of the rules in all respects and the same has been actually
paid to the excise authorities in respect of the sores covered by the bills.
VAT will be reimbursed at actual against documentary evidence, present rate being 5%.
RDSO approved Paint manufacturers located outside West Bengal are required to supply
the material preferably from “Warehouse in West Bengal”.
5.0 EARNEST MONEY DEPOSIT (EMD)
5.1 The amount of earnest money deposit will be according to the value of tender as mentioned
below:
Estimated Value of Tender (Rs)
Upto Rs. 5,00.000.00
5,00,000 to 10,00,000.00
10,00,000.00 to 25,00,000.00
[Signature of Tenderer]
Amount of Earnest Money (Rs)
5,000.00
10,000.00
25,000.00
Page 4
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
25,00,000.00 to 50,00,000.00
45,000.00
50,00,000.00 to 1,00,00,000.00
1,00,000.00
1,00,00,000.00 to 2,00,00,000.00
1,50,000.00
Above 2,00,00,000.00
2,50,000.00
In this tender EMD is Rs. 2,50,000.00 (Rupees two lakhs fifty thousand only)
5.2 Offer without Earnest Money and in absence of valid reason for doing so will be rejected.
5.3 The units registered with DGS&D, SSI units registered with NSIC, Public Sector Units(PSU) and
RDSO approved vendors may be exempted from submission of EMD on production of
documentary evidence.
5.4 The EMD of unsuccessful bidders will be returned after finalisation of the tender without any
interest.
5.5 The EMD of successful tender will be returned after receipt of Security Deposit.
6.
SECURITY DEPOSIT
6.1 Security deposit equivalent to ten (10) percent of the total contract value shall have to be
deposited by the successful tenderer within 15 days of receipt of LOI / Purchase Order in the
form of (a) Demand Draft in favour of SAIL RITES Bengal wagon Industry Pvt. Ltd., payable at
KOLKATA or (b) Bank Guarantee as per format provided by SRBWIPL valid till completion of
contract including Warranty Period .Security shall bear no interest and will be forfeited for nonperformance of the contract by the successful tenderer.
6.2
On due performance and completion of the contract in all respect the security deposit will be
returned to the contractor without any interest on cerification of concerned department.
Security Deposit may be waived for SSI, NSIC, PSU, DGS&D and RDSO approved sources.
Security Deposit may also be waived for propriety items. Original Equipment suppliers.
However, based on the nature of items Security Deposit can be insisted even from the vendor
registered with SSI/NSIC/DGS&D and RDSO.
6.3 The company shall be entitled and shall be lawful on its part to forfeit the said security deposit in
whole or in part in the event of any default., failure, or neglect on the part of the contractor in the
fulfilment or performance in all respects of the contract under reference or any other contract
with the company or any part thereof to the satisfaction of the company shall also be entitled to
deduct from the said security deposit any loss or damage which the company may suffer or be
put to by reason due to any act or other default, recoverable by the company from the
contractor in respect of the contract under reference or any other contract and in either of the
events aforesaid to call upon the contractor to maintain the said security deposit at its original
limit by making further deposit, provided further that the company shall be entitled to recover
such claim from any sum then due or which at any time thereafter may become due to the
contract under this or any other contract with the company.
7.
TERMS & CONDITIONS
7.1
7.2
Quoted rates shall be FIRM during pendency of contract and no escalation will be
allowed.
Delivery Terms: - F.O.R SAIL RITES Bengal Wagon Industry Pvt. Ltd Factory, Kulti
(Beside SAIL Growth Works).
[Signature of Tenderer]
Page 5
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
7.3
7.4
7.5
7.6
7.7
7.8
7.9
7.10
7.11
Inspection –Inspection shall be carried out by RDSO or as per guideline of RDSO.
Manufacture’s Test Certificate, DM by RDSO or inspection certificate by RITES as
applicable and Guarantee Certificate shall accompany the supply.
Delivery Period – The supply shall is to be completed within 10 (ten) months time from
the date of LOI / Purchase Order whichever is earlier. Delivery shall be advised by
SRBWIPL time to time as per production schedule.
Paying Authority– Chief Financial Officer / SRBWIPL or his authorised representative of
accounts department as delegated by CFO SRBWIPL.
Certifying Authority – Head of the Stores Department or Head of SRBWIPL Factory,
Kulti duly checked by SRBWIPL Factoty, Kulti Finance.
Income Tax – Income Tax will be deducted at the prevailing rates from the nill of supplier
and any increase in Income Tax or surcharge thereto will be borne by supplier.
Liquidated Damage – In the event of late supply of materials, purchaser reserves the
right to recover from the supplier by way of liquidated damage a sum equivalent to two
percent (2%) of value of materials including taxes, duties, freight & insurance for per
month delay or part thereof to a maximum of 10%.
Risk Purchase – Purchaser reserves the right to procure the materials from other source
in the event of failure to supply the material within stipulated period in the order at the risk
and cost of supplier.
Quantity Variation – Purchasers reserves the right to increase / decrease by 30% the
tendered quantity at the same price and terms & conditions during currency of the
contract without assigning any reason.
Arbitration i)
In the event of any dispute or difference arising between SRBWIPL and Contractor
relating to the interpretation and application of the provisions of the Contract, such
difference or dispute shall be settled as per guideline issued by department of Public
Enterprise and the arbitration and Conciliation Act’1996 shall not be applicable.
ii)
All questions, disputes or differences whatsoever arising between the SRBWIPL
and Contractor other than PSU or in relation to or in connection with the contract , either
party may forthwith give notice to other in writing of the existence of such question,
disputes or differences and the same shall be referred to the adjudicator of sole arbitrator.
Chief Executive Officer of SRBWIPL shall have the right and authority to appoint any
officer of the company as arbitrator not below the rank of a who is not connected with the
order under the Arbitration & Conciliation Act’1996.
iii) Any legal dispute that may arise will be settled within the jurisdiction of Court of
Kolkata.
7.12
Validity of offer – The offer shall remain valid for a minimum period of one hundred
eighty days (180) days from the Bid Opening date.
8.0
GENERAL
8.1
No email / FAX quotation will be accepted.
Tenderer sending tender by mail / courier will do so solely on their own risk and SRBWIPL
will not be responsible for any loss in transit or postal delay.
Incomplete tenders or tenders submitted with qualified conditions at variance with special
as well as General terms & conditions / instruction to bidders of this tender are liable to be
rejected summarily.
The Contract shall be treated as having been concluded as soon as a Letter of Intent is
issued.
8.2
8.3
8.4
[Signature of Tenderer]
Page 6
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
8.5
8.6
8.7
8.8
Clarifications, if any, are to be sought by the tenderer(s) before submission of their offer
and no complaints , whatsoever will be entertained after opening of the tender.
Any correction made in tender / offer should be attested under full signature with
company’s seal of the tenderer.
SRBWIPL does not bind itself to accept the lowest offer or anu offer or to assign any
reasons for non-acceptance of it. SRBWIPL is at the liberty and / or reject any or all offers
without assigning any reason thereof.
Each and every page of the tender document should be signed by the tenderer and
returned with the Techno-Commercial Bid as a token of acceptance.
For SAIL RITES Bengal Wagon Industry Pvt. Ltd.
SWAPAN BASU
DGM SRBWIPL/KULTI
TENDERER’S SIGNATURE :..........................................
DESIGNATION:................................................................
DATE:...............................................................................
COMMON SEAL:……………………………………………
[Signature of Tenderer]
Page 7
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
ANNEXURE – III
SPECIAL CONDITIONS OF CONTRACT
1.0 GENERAL
Successful tenderer shall ensure supply of full ordered quantity of materials within the
stipulated delivery period in the order.
2.0 BREAK UP RATES
The bidder shall furnish detail break up of their rates in the following manner in their offer.
a) Basic Price Ex – works / warehouse in West Bengal as applicable
b) Excise duty
c) VAT
d) Freight from their works to SRBWIPL, Kulti (West Bengal)
e) TOTAL - ...........................................
3.0 TERMS OF PAYMENT
3.1.1
3.1.2
4.
100% payment for each consignment shall be made within 30 days of submission of bills
to Chief FINANCIAL OFFICER/SRBWIPL, Admin Office, SRBWIPL , Kolkata through
SRBWIPL Factory Incharge duly verified by SRBWIPL Factory, Kulti Finance The bill
shall be accompanied by duly receipted Delivery Challan and Despatch Memo /
Inspection certificate issued by RDSO / RITES as applicable, Manufacturer’s Test
Certificate & Guarantee Certificate. The quantity of material per consignment shall be
intimated to successful bidder in the supply order copy.
Payment shall be made by Crossed Account Payee Cheque / RTGS.
PACKING
The supplier shall provide such packing of the goods as is required to prevent their damage or
deterioration during transit. The packing shall be sufficient to withstand the rigours of road transportation.
Items damaged or lost in transit shall be made good / replaced free of cost.
5. BRANDING & MARKING
The marking shall be as per marking details given in the Maintenance Manual , drawing, specification for
CRF section for BOXNHL wagon and will be same as being given to other wagon builders.
6. PRODUCT CATALOGUE
Product Catalogue / Drawing along with technical details shall be submitted with the offer.
[Signature of Tenderer]
Page 8
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
7. PERFORMANCE REPORT
Performance Report with respect to supplies made in the past five years is to be submitted with the offer.
8. GUARANTEE / WARRANTY
a.
The supplier shall warrant that the goods supplied under the contract are new, unused and
free from defects and faults in design , materials, workmanship and shall be of the highest
grade and consistent with the established and generally accepted for good of the type ordered
and in full conformity with the specification mentioned in the order and shall be operable if
operated properly.
b. The warranty shall remain valid for 30 months from the date of DM or 24 months from the date of
placing the equipment in service whichever is later except in respect of complaint, defects and
/ or claim notified to the contractor with 2 / 3 months of such dates. Any approval or
acceptance by the purchaser of the stores or materials incorporated herein shall not in any
way limit the contractor’s liability.
9.0
OPTION CLAUSE
SRBWIPL management reserves the right to increase or decrease the ordered quantity by 30%
(thirty percent) during the currency of the contract at the same price and terms and conditions .
10.0
DISTRIBUTION OF TENDERED QUANTITY
The SRBWIPL management reserves the right to distribute the total tendered quantity in the ratio
of 60:40 in favour of L1 and L2 bidder without assigning any reason whatsoever for greater interest
of the company in case L2 bidder agrees to match the L1 rate.
11.0
REPEAT ORDER
SRBWIPL management reserves the right to place order for 75% of the ordered quantity at the same
rate and terms within the currency of the contract and contractor will be bound to accept the repeat
order.
12.0
JURISDICTION
12.1
The contract shall be deemed to have been entered into at KOLKATA and all courses of
action relating to the contract will thus be deemed to have been arising only within the
jurisdiction of Kolkata High Court, West Bengal, India.
The SRBWIPL management reserves the right to terminate the contract at any stage if
considered necessary by the management without assigning any reason whatsoever for
greater interest of the company and such action cannot be challenged by the tenderer /
supplier.
Past performance of the supplier will be taken into consideration at the time of finalising
the order. SRBWIPL management reserves the right to ignore the offer of the bidders
whose past performance is not satisfactory.
In case the offer is not accepted by SRBWIPL, the tenderer shall not be entitled to claim
any cost, charges, expenses made for submission of offer.
12.2
12.3
12.4
[Signature of Tenderer]
Page 9
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
12.5
All other terms and conditions of the contract will be as per the General terms and
conditions for supply / purchase (1974).
For SAIL RITES Bengal Wagon Industry Pvt. Ltd.
(SWAPAN BASU)
DGM / SRBWIPL
TENDERER’S SIGNATURE :..........................................
DESIGNATION:................................................................
DATE:...............................................................................
COMMON SEAL:
[Signature of Tenderer]
Page 10
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
ANNEXUR- IV
SEPARATE ANNEXURE
PRICE BID
Sl.No. Description
1
Qty
Rate
(Rs)
per
set Rate in words
(Rs)
Cold Rolled Formed Sections (CRF) 500
and CRF for Single Piece Hat sets
Section for Centre Sill (as per latest
RDSO drawing) for manufacture of
BOXNHL (Design – D) wagon. List
of CRF items attached herewith.
(Incase RDSO revise the drawing for
CRF sections during currency of
contract, the revised drawings would
be applicable and accordingly
revised CRF item(s) to be supplied
by Firm)
2
3
4
5
Reference Drawing No. WD-09034S-22 Alt 8 and WD-11058-S-01 Alt.
6 or latest.
RDSO Specification : WD-01-CRF12
Material Specification -: IRS:M-44
Excise duty
VAT 5%
Freight upto SRBWIPL Factory,
Kulti, West Bengal
Total landed cost per set (1+2+3+4)
at SRBWIPL Factory, Kulti, West
Bengal
Note:
For evaluation of L1 price–
(i)
In case of inter state sales (outside West Bengal) amount of entry tax ,
ED , CST and Freight charges will be added to the basic price to arrive
at the “Total Landed Cost”.
(ii)
In case of within the state purchase, VAT shall be deducted from the
total landed cost at Sl.No. 6 in above table to arrive at the “Net Landed
Cost”.
[Signature of Tenderer]
Page 11
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
(iii)
The lowest landed cost out of the two options ie. “Total Landed Cost”
for inter state sales and “Net Landed Cost” for within the state sales ,
stated at (i) and (ii) resp. above shall decide the L1 price.
Tender’s Signature:.......................................................................
Designation:..................................................................................
Date:.............................................................................................
Common Seal:………………………………………………………..
[Signature of Tenderer]
Page 12
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
ANNEXURE – V (LIST ALTERED)
Drawing No.
Item
No.
MATRL. &
SPEC.
DIMENSION /SIZE
NO.
OFF
PER
WAGON
4
LENGTH
(mm)
WD-09034-S-22, ALT-6
2
CORNER STANCHION
IRS-M44
ANGLE 110x110x8 THK
WD-09034-S-22, ALT-6
3
SIDE TOP COPING
IRS-M44
CHANNEL 75x110x7
THK
CHANNEL 170x75x4
THK
HAT 200X125X100X4
THK
CHANNEL100X51X4
THK
CHANNEL100X51X4
THK
CHANNEL100X51X4
THK
CHANNEL100X51X4
THK
CHANNEL100X51X4
THK
CHANNEL100X51X4
THK
CHANNEL100X51X4
THK
CHANNEL100X51X4
THK
CHANNEL100X51X4
THK
CHANNEL100X51X4
THK
2
10056
WD-09034-S-22, ALT-6
4
END TOP COPING
IRS-M44
4
3196
WD-09034-S-22, ALT-6
5
END STANCHION
IRS-M44
8
2092
WD-09034-S-22, ALT-6
6a
CROSS STRINGER
IRS-M44
2
367
WD-09034-S-22, ALT-6
6b
CROSS STRINGER
IRS-M44
2
389
WD-09034-S-22, ALT-6
6c
CROSS STRINGER
IRS-M44
2
586
WD-09034-S-22, ALT-6
6d
STRINGER (OUTER)
IRS-M44
8
628
WD-09034-S-22, ALT-6
6e
STRINGER (END)
IRS-M44
8
1472
WD-09034-S-22, ALT-6
6f
STRINGER (CENTRE)
IRS-M44
4
1658
WD-09034-S-22, ALT-6
6g
STRINGER (INNER)
IRS-M44
8
1684
WD-09034-S-22, ALT-6
6h
IRS-M44
WD-09034-S-22, ALT-6
6i
WD-09034-S-22, ALT-6
6j
CHANNEL FOR APM
RESERVOIR
STRINGER FOR EQ LVR
SUPPT BKT
CROSS STRINGER FOR
EQ. LVR. SUPPT BKT
1
586
1
350
1
586
WD-09034-S-22, ALT-6
7a
IRS-M44
WD-09034-S-22, ALT-6
7b
WD-09034-S-22, ALT-6
7c
DOOR FRAME
(HORIZONTAL)
DOOR FRAME
(VERTICAL)
DOOR FRAME (CENTRE)
8
1450
8
765
4
672
IRS-M44
CHANNEL 36X45X4
THK
CHANNEL 36X45X4
THK
CHANNEL 36X45X4
THK
ANGLE 71X40X4 THK
WD-09034-S-22, ALT-6
8
SIDE MIDDLE COPING
12
1504
WD-09034-S-22, ALT-6
9
IRS-M44
ANGLE 71X40X4 THK
4
1530
IRS-M44
1530
IRS-M44
CHANNEL 36X145X4
THK
ANGLE 50X50X5 THK
4
11a
SIDE MIDDLE
COPING(DOOR WAY)
DOORWAY STIFFENING
CROSS BAR
END ANGLE
WD-09034-S-22, ALT-6
10
21
WD-09034-S-22, ALT-6
2
3012
22
WD-09034-S-22, ALT-6
11b
CRIB ANGLE OUTER
IRS-M44
ANGLE 50X50X5 THK
4
2610
23
WD-09034-S-22, ALT-6
11c
CRIB ANGLE INNER
IRS-M44
ANGLE 50X50X5 THK
2
1894
24
WD-09034-S-22, ALT-6
11d
STAY FOR END WALL
IRS-M44
ANGLE 50X50X5 THK
4
410
25
WD-09034-S-22, ALT-6
11e
SUPPORT ANGLES
IRS-M44
ANGLE 50X50X5 THK
3
366
26
WD-09034-S-22, ALT-6
11f
SUPPORT ANGLES
IRS-M44
ANGLE 50X50X5 THK
1
285
27
WD-09034-S-22, ALT-6
11g
SUPPORT ANGLES
IRS-M44
ANGLE 50X50X5 THK
1
151
28
WD-09034-S-22, ALT-6
11h
SUPPORT ANGLES
IRS-M44
ANGLE 50X50X5 THK
2
335
29
WD-09034-S-22, ALT-6
11h
SUPPORT ANGLES
IRS-M44
ANGLE 50X50X5 THK
2
120
30
WD-09034-S-22, ALT-6
11j
CROSS STRINGER
IRS-M44
ANGLE 50X50X5 THK
2
389
SL
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
[Signature of Tenderer]
DESCRIPTION
IRS-M44
IRS-M44
IRS-M44
IRS-M44
2122
Page 13
SAIL RITES BENGAL WAGON INDUSTRY PRIVATE LIMITED (SRBWIPL)
(A Joint Venture Company of SAIL and RITES)
31
32
33
34
35
36
37
38
39
40
WD-09034-S-22, ALT-6
11k
CROSS STRINGER
IRS-M44
ANGLE 50X50X5 THK
2
586
WD-09034-S-22, ALT-6
11l
IRS-M44
ANGLE 50X50X5 THK
1
586
WD-09034-S-22, ALT-6
11m
IRS-M44
ANGLE 50X50X5 THK
1
440
WD-09034-S-22, ALT-6
11n
IRS-M44
ANGLE 50X50X5 THK
1
1319
WD-09034-S-22, ALT-6
11o
IRS-M44
ANGLE 50X50X5 THK
1
2294
WD-09034-S-22, ALT-6
11p
IRS-M44
ANGLE 50X50X5 THK
2
357
WD-09034-S-22, ALT-6
11q
PART OF ROLLER
BRACKET
HORIZONTAL LEVER
HANGER BRACKET
HORIZONTAL LEVER
SUPPT BKT(SMALL)
HORIZONTAL LEVER
SUPPT BKT(LARGE)
BRACKET FOR PIPE 32
NB
CRF50X50X5 204 LONG
IRS-M44
ANGLE 50X50X5 THK
1
204
WD-09034-S-22, ALT-6
12
IRS-M44
2094
13
2
10042
WD-09034-S-22, ALT-6
WD-11058-S-01 Alt. 6
14
CENTRE SILL (SINGLE
PIECE HAT SECTION)
IRS-M44
CHANNEL 160X102X8
THK
CHANNEL 76X204X6
THK
HAT
674X173.5X327X10 THK
12
WD-09034-S-22, ALT-6
BODY SIDE STANCHION
CHANNEL
SOLE BAR
1
10042
IRS-M44
Tender’s Signature:.......................................................................
Designation:..................................................................................
Date:.............................................................................................
Common Seal:………………………………………………………..
[Signature of Tenderer]
Page 14