NEW COVER COMING
Electric Pontoon Legs
This innovative lifting system enables pontoon boats to literally stand on their own four feet using nothing more than the power from a 12 volt battery.
Whenever you pull into shore, on any type of bottom, you can raise your boat clear of the water in seconds with the touch of a button. Like conventional
Hewitt Lifts, this made-to-go system helps protect your pontoon from the damaging effects of waves and water for longer service life and higher
resale value.
Hewitt Electric Pontoon Legs are constructed from high-grade structural aluminum and solidly bolted to the frame members of your pontoon boat. The complete system adds only 385 lbs
and has a load capacity of 6000 lbs. Maximum lift height is typically 5½’ from the bottom of the legs to the underside of the boat deck, or 3½’ to the bottom of the pontoons.
Standard Features
• All-electronic lifting mechanism. A powerful 12 volt DC motor coupled to an acme screw and nut is used to drive each heavy-duty frame leg module. This design provides a positive
self-locking lift at any height.
• 4-way and independent position control. Allows quick extension and retraction of all four legs plus individual adjustment of any leg to easily level your boat.
• Low-profile design. Legs extend less than 6½” below deck in their stowed position. Will not interfere with trailering or normal operation.
• Large 11½” x 22½” tubular feet evenly distribute weight over a large area for solid footing on hard or soft bottoms. Feet pivot independently for added stability on rocky or uneven terrain.
Compatible with any style of pontoon trailer
Independent leg height adjustment and pivoting feet
Master power shutoff
Quietly raise and lower pontoon legs with a touch of a button
Electric Pontoon Legs
Self-monitoring electronic control center with high performance electric motor drive
Electronic Control Module
Onboard Pendant Control
Wireless Remote Control
The compact enclosure is vibration resistant and
The four leg modules can be operated in unison with
A key fob style control is
fully sealed to protect the electronics against water
the push of a single button or controlled individually
included with every system.
infiltration. Features include a “smart board” to
with separate buttons for leveling your boat on uneven
Raise and lower your boat from
continuously monitor motor torque and leg posi-
bottoms. LED position indicators light up when
the convenience of your dock
tion, and an end-of-travel buzzer to indicate when
legs are in use; turn off when legs are in the stowed
or shore.
the legs are completely raised or lowered.
position; and blink if an error is detected.
Works with most makes and models
Hewitt Electric Pontoon Legs can be installed on virtually any twin tube
pontoon boat and most tri-toon models with at least 12” of space between
the pontoons.
The versatile, durable, adjustable pontoon lift that travels with you
Hydraulic Pontoon Legs
Hewitt Hydraulic Pontoon Legs are available in three models to best match the size, style and operating conditions of your pontoon boat. Like the
Hewitt electric system, these models help preserve the appearance and value of your pontoon, eliminate the need to tie off your boat and free up
space at your dock. Enjoy the convenience of push-button operation and the flexibility of a built-in lift that travels with your pontoon.
Built to last longer and stand taller
Hydraulic cylinders are the muscles of any fluid power system. Hewitt Hydraulic Pontoon Legs use 2” cylinders which are 20% stronger than those of competitors. The rest of the supporting structure, including mounting brackets, legs and feet, are made from structural aluminum which offers a high strength-to-weight ratio and natural corrosion resistance. Hewitt
Hydraulic Legs are also well suited to deeper water applications. At maximum leg extension, the underside of the boat’s deck is approximately 6’ above the bottom of the supporting feet.
Designed to work with your boat
There is a Hewitt Hydraulic model for virtually every pontoon boat. Leg assemblies are solidly bolted to the existing frame members of your pontoon boat and will not interfere with
trailering or normal operation. In the retracted position, legs extend less than 6½” below the deck. Boats can be transported with scissor or bunk style trailers. The Standard model only
adds 375 lbs to your boat and has a load capacity of 4000 lbs. Straight Leg and Wide-Base models have a 6000 lb capacity and weigh 425 lbs.
Leg assemblies
in stowed position
2” cylinders are
20% stronger than competitors’
Single hydraulic pumps for
Standard Hydraulic Legs
Dual synchronized hydraulic pumps for
Straight Leg and Wide-Base Legs
Standard Hydraulic Legs
Hydraulic Straight Legs
Hydraulic Wide-Base Legs
The standard model is an economical choice for smaller
boats with twin pontoons. The front and rear sets of legs
are tied together and operate in tandem. Each set of legs is
powered by a separate hydraulic pump and can be raised
or lowered independently to level your boat. Leg assemblies are constructed from rugged 4” square tubing.
This model can be used with either twin or triple pontoon boats
and uses heavy-duty 6” diameter aluminum tubing for superior
strength and greater load carrying capacity. This model features
dual synchronized hydraulic pumps front and rear. Each leg
is connected to its own pump, providing faster extension and
retraction. Front and rear legs can be operated separately to
level your boat.
Wide-Base and Straight Leg models are identical with
one exception. Specially designed angled mounting
brackets give these legs the widest base of any onboard lift available today —72”! That’s 24” wider than
the nearest competition. This extra width and stability
is ideal for twin or triple pontoon boat owners who live
or travel in areas of strong winds and rough water.
Choice of 3 models to provide optimum support for your pontoon boat
Hydraulic Pontoon Legs
Built stronger to perform better than other hydraulic leg systems.
Onboard Pendant Control
Wireless Remote Control
User-friendly design allows your boat to be
raised or lowered with the press of a single
button. The control also allows independent
operation of front and rear legs for leveling.
“LifTrack,” a unique LED arc-of-travel
indicator, shows the exact position of the
legs during extension and retraction.
A key fob style control is included with
every system. Raise and lower your
boat from the convenience of your
dock or shore.
Heavy-duty Pivot with
Brass Bushings
The top end of each support leg pivots
on a 1¼” solid machined bar fitted with
a brass bushing for smooth movement to
prevent wear and give superior resistance
to corrosion and wear.
Extra Reinforcement
Attachment/pivot points for the feet and
hydraulic cylinders are reinforced through
the entire width of the legs. The welded
sleeve is constructed from 11/8” diameter
tubing with an extra thick ¼” sidewall.
(Compared to competitor models that rely only on a bolt and single hole through aluminum.)
An onboard lift for virtually any pontoon boat – twin-toon, tri-toon, 19 to 28 ft
I/O Hydraulic Pontoon Legs
Hewitt I/O Legs are specially designed for I/O pontoon boats with a performance package that prevents the use of other legs due to a lack of space between
pontoons or concerns over loss of speed from rear leg drag. The I/O mounting system positions the rear legs behind the pontoons. There’s nothing in the water
stream to slow you down or affect performance. I/O Hydraulic Legs can be installed on almost any pontoon boat and can be used in combination with two
front leg options, the Hewitt hydraulic straight leg or wide base design.
Standard Features
Hewitt I/O Pontoon Legs use the same heavy-duty materials, construction techniques and pumps as our other hydraulic leg systems. They also offer the
same simple push button operation. Features unique to the I/O Pontoon Legs are shown below.
Support Bracket
Rear Leg Placement
Tow Hook
The slimline under deck mounting track solidly
secures the rear legs while allowing water to
freely flow between the pontoons.
In the stowed position, feet are raised
completely out of the water and tucked in
behind the pontoon tubes.
A horizontal cross member gives the legs
lateral stability and provides a tow bar with
hook for quick, easy attachment of ski lines.
Canopies
Hewitt Pontoon Legs protect your boat from the bottom up;
our free-standing canopies protect it from the top down! These
highly functional all-aluminum frames look great and can be
topped off with your choice of fabric and color. Canopies allow
you to keep boat interiors cooler during hot summer days.
Six uprights are used on 29 ft and longer canopies.
A free-standing canopy system to protect your Pontoon Legs equipped pontoon boat
Exposure to sun, wind and driving rain can ruin your pontoon from the inside out. Cracking, fading and peeling not only takes away from the look, comfort and function of your pontoon, it
reduces the value. Hewitt custom-designed canopies provide years of beautiful, maintenance-free protection. Canopies are available in 120” or 138” widths and a wide variety of lengths.
Choose from three styles: standard, tower or peak roof frame with vinyl or SeaMark fabric covering.
Features
• Free-standing frame made from large, 3” square aluminum tubing. Cross braced design allows
the entire canopy and frame to be moved in one piece if needed. Screw-in anchoring posts included.
• Canopy frame top with cross bows positioned every two feet or 18” on 138” widths.
• Quick-release center support straps keep cover from billowing in the wind.
Reinforced Corners
Canopy Straps
Screw-in Anchor
Tension Cords
• Tension cords keep covering taut and simplify installation and removal.
• Heat-welded seams prevent thread rot and water infiltration.
• Canopy length can be extended at any time for little additional cost.
• 84” canopy extensions allow easy adjustment for different boat heights.
Have a special canopy need? Just contact your dealer.
Standard Canopy
Peak Roof Canopy
Tower Canopy
This economical design offers rounded sides and
end caps for a smooth wrap appearance with no
hard edges.
The steep pitch of a Peak Roof Canopy rapidly sheds water.
Its higher profile and clean lines accentuate the color of
your canopy.
The arched canopy provides greater vertical clearance,
allowing boat towers and bimini tops to remain in the
upright position for storage.
Grey
Beige
Blue
Green
Yellow
Teal
White
SeaMark Standard Colors
This 16 oz marine fabric is made from combining Sunbrella fabric with a textured marine grade vinyl. SeaMark
fabric has a fluorocarbon finish which makes it UV, water, mildew and fade resistant. Choose from 10 popular colors.
Black
Burgundy
Cadet
Pacific
Dubonnet
Navy
Forest
Linen
Toast
Hemlock
Standard Vinyl Canopy Colors
Our 16 oz nylon reinforced vinyl canopies are UV resistant to
prevent premature fading. Choose from 7 popular colors.
Accessories
Hewitt offers an extensive line of accessories designed to aid installation, simplify use and provide additional
protection for your boat. Accessories are also available to satisfy the specific needs of certain types of craft and
varying lake or river conditions.
Canopy Bracing
Recommended on 29 ft canopies
and longer.
Catwalk Brackets
All aluminum brackets with mounting hardware to make side mounted
catwalk for your free standing canopy.
(Planks not included)
Wheel Kit
Mounts on center of free standing
canopy. Works great for maneuvering
around objects or over sea walls.
Corner Assist Wheel Kit
Makes installation and removal much
easier. Quick to set up, lightweight and
easy to use. Just slide into the frame
(LWCHL).
Under-Canopy Storage Net
Make the most of available space. This convenient storage net easily attaches to the
canopy frame, providing quick access to supplies and recreational gear. Weight capacity
approximately 75 lbs.
Post Ratchet
Provides leverage to easily install
and remove screw-in anchors.
36” Plastic Bumper
Durable plastic bumper
with recessed holes,
mounts to uprights.
Lift Jack
Use to raise one end of
the canopy to install or
remove wheels.
Specifications
Model
Height With
Legs Retracted
Capacity
Recommended Boat Lengths
Weight
Min. Width Between Pontoons
For Triple Toon Installation
Min. Width Between
Pontoons For Twin Tubes
Total Lift Height From
Bottom To Deck Top
Max. Transom Length From First Full
Cross Member On Rear Of Boat
Electric
6-1/2”
6000 lbs
19’ to 26’
385
12”
-
66”
-
Standard
5-1/2”
4000 lbs
19’ to 22’
398
N/A
48-1/2”
72”
61”
Straight
6-1/2”
6000 lbs
19’ to 28’
447
8-1/2”
-
72”
-
Wide Base
6-1/2”
6000 lbs
19’ to 28’
467
10-1/2”
-
72”
-
IO Wide
6-1/2”
8500 lbs
19’ to 34’
514
6” on Rear 10-1/2” on Front
-
72”
-
IO Straight
6-1/2”
8500 lbs
19’ to 34’
504
6” on Rear 8-1/2” on Front
-
72”
-
We at HEWITT would like to thank you for your interest in our products. We are confident that you will find the service, quality, workmanship, and design of all HEWITT products to be the industry’s finest. For over 40 years, boat and
watercraft owners have trusted the safety and longevity of their investments to Hewitt Lifts, docks, and canopies.
LIMITED WARRANTY
New HEWITT-built pontoon legs carry a 2 year conditional warranty on all aluminum and aluminum welds. New Hewitt built free-standing canopies and accessories carry a 15 year conditional warranty on all aluminum and aluminum welds. A 5 year conditional warranty on vinyl and SeaMark
canvases, excluding fading.
During the periods stated below from the earlier of the date of purchase or the date the product was put into service, Hewitt Machine & Mfg., Inc. (hereinafter
“HEWITT”) shall cover the costs of parts needed to repair or replace any of the following products defective in material, workmanship or factory preparation, subject
to the limitations and expectations contained herein.
1. 15 year warranty on aluminum welds;
2. 5 year warranty on the following:
a. BoatPort galvanized steel and welds;
b. Vinyl and SeaMark canvases; and
c. Aluminum decking.
3. 3 year warranty on BoatPort polyethylene tanks.
4. 2 year warranty on all other products and accessories.
(hereinafter the “Warranted Products”)
This Limited Warranty is subject to the following limitations and exceptions:
1.This Limited Warranty covers only Warranted Products manufactured by HEWITT. Non-HEWITT manufactured products are sold “ as is,” without warranty of any kind
by HEWITT including any express warranty and implied warranty regarding MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ALL SUCH WARRANTIES ARE DISCLAUMED. The sole warranty, if any, with respect to such non-HEWITT manufactured products is given by the manufacturer or producer thereof. Based
upon HEWITT’s knowledge the following warranties are provided by other manufacturers: hydraulic pumps and hoses carry a manufacturer’s 2 year warranty. Hydraulic cylinders carry a manufacturer’s 1 year warranty. BoatPort controller carries a manufacturer’s 1 year warranty. However, HEWITT makes no representations
or warranties concerning these non-HEWITT manufactured products, and the customer should inquire directly with such third party manufacturers regarding any
warranties.
2.This Limited Warranty covers only Warranted Products purchased new by the original purchaser. This Limited Warranty shall not extend to anyone other than
the original purchaser of the HEWITT product.
3.This Limited Warranty does not cover the labor costs to repair or replace the Warranted Products.
4.This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by corrosion, fading and minor deterioration resulting from
exposure to the elements, including the sun, environmental factors or acts of God. “Environmental factors” include such things as airborne fallout, chemicals,
tree sap, salt, ocean spray, water hazards. “Acts of God” include such things as fire or accident, rainstorms, hailstorms, windstorms, tornados, sandstorms,
lightning, floods and earthquakes.
5.This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by abuse, misuse, neglect, poor/improper maintenance,
tampering with parts, improper or unauthorized adjustment or alteration.
6.This Limited Warranty does not cover the costs to repair damage to the paint and/or finishes, puncture damage, dents, or scratches of the Warranted Products.
7. This Limited Warranty does not cover the costs of normal/scheduled maintenance of the Warranted Products.
8.This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by improper installation.
9.This Limited Warranty does not cover the costs to repair damage to the Warranted Products caused by the failure to comply with specifications or instructions. Specifications and instructions are subject to change without notice.
10.HEWITT reserves the right to make changes in the Warranted Products at any time without incurring any obligation under this Limited Warranty to make the
same or similar modifications on Warranted Products previously manufactured and/or sold.
11. In the event of a possible warranty claim, the Warranted Product shall be returned to HEWITT. If proven to be defective upon inspection, the defective Warranted Product shall be exchanged for new or comparable rebuilt products, as determined by HEWITT. and shipped back to the original owner/purchaser. All
shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective Warranted Product.
HEWITT must be notified in writing within one month of the expiration of the applicable period of the Limited Warranty for an item to be evaluated for warranty.
12.The customer’s remedies with respect to Warranted Products shall be exclusively limited to the repair or replacement remedy as provided in this Limited
Warranty and in no event shall HEWITT be liable for loss of profits, revenues, savings, inconvenience, associated costs, expense for equipment or service, use
of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of,
or inability to use, the Warranted Product, regardless of the legal theory on which the claim is based, and even if HEWITT has been advised of such damages.
In no event shall recovery of any kind against HEWITT be greater in amount than the purchase price of the Warranted Product sold by HEWITT and causing the
alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising
out of use or misuse of, or inability to use, the Warranted Product. HEWITT is not liable for third party claims. In no event shall HEWITT be liable for incidental
or consequential damages to the full extent such may be disclaimed by law.
13.This Limited Warranty is the only warranty between the parties. This Limited Warranty states the limits and association of risk between two parties. The customer acknowledges and understands this Limited Warranty and agrees to be bound by the terms contained herein. No other express or implied warranties or
guaranties, except as indicated in this Limited Warranty, given by any person or entity with respect to HEWITT and its products shall bind HEWITT. This Limited
Warranty supercedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE APPLY TO HEWITT AND ITS PRODUCTS AND ARE HEREBY DISCLAIMED.
Specifications are subject to change without notice. Installation of pontoon legs may require minor modifications to your boat.
Protected by one or more of the following U.S. Patents: 6,907,835; 6,983,707; 7,051,665; 7,156,030 . Other patents pending.
Pontoon Legs and LifTrack are trademarks of Hewitt Machine and Manufacturing, Inc.
PRINTED IN THE USA
HEWITT MACHINE AND MANUFACTURING INC.
709 Hwy 14 East, Nicollet, MN 56074
Weekdays, 7:30 am to 4:30 pm CST
Ph: 507.225.3421 or 800.544.2067
Fax: 507.225.3053
www.hewitt-roll-a-dock.comwww.pontoonlegs.com