1210 Dimmer
1210
A high performance dimmer rack for the professional
entertainment and production market.
Features















Over rated circuit breaker protection of outputs to avoid nuisance tripping during heavy use.
DMX status LED. Power available LED indicator for each individual Phase for easy fault finding.
LED indicators for channel operation.
DMX-512 control with LCD interface, rack can be set to any DMX Start Address + full soft patch
for each channel.
Built in Channel Test Function + Hold & Record Function to store 1 scene for standalone use, great
for exhibitions - no console required rack will resume scene on power up.
Dimmer Curves - Linear, Switched, 110V & "S" Curve can be assigned to each individual channel.
Colour coded outlets for instant identification of phasing.
Variety of outlet configurations available on 12 x 2.4kW model.
Toroidal chokes – 130µs* (microsecond) rise time.
Single or three-phase operation.
Intelligent heat management - temperature display on front panel with automatic activation of
internal fan and auto shutdown on overheat to protect the dimmer.
Easy to change Triacs.
Optional high performance SCR and SSR devices.
Grab handles on front face for easy and safer manual handling.
Supplied with 1.5m mains cable and 40Amp plug.
*130 microseconds at 90 degrees conduction angle from 10% to 90% of output with maximum load.
1210 Dimmer
The Philips Strand Lighting 1210 series of 19” rack-mount dimmer racks represent premium
performance and high value for users in the professional entertainment and production markets.
Technical Specifications
Supply Voltage:
415V in 3 Phase configuration, 240V in Single Phase configuration.
Standards Compliance:
CE; C-Tick
Independently tested for electrical compliance to NZ/AUS standards.

12x2.4kW model available with AU/NZ standard pattern 10A outlets (Type I, AS/NZS 3112
Australasian 10A/240 V) or HardWired or Wieland or Socapex. Other configurations
available on request.
13A thermal-magnetic circuit breakers on 12 x 2.4kW Model.

6 x 5kW model available with AU/NZ standard pattern 20A outlets (Type I, AS/NZS 3112
Australasian 20A/240 V) or HardWired. Other configurations available on request.
25A thermal-magnetic circuit breakers on 6 x 5kW Model.
DMX: 1x 5 Pin XLR DMX In and Thru.
On loss of DMX rack can be set to either Hold Last or Fade to Black.
Mechanical Data
Construction: Folded sheet steel.
Weight: 20kg.
Dimensions: 132mm (H) x 482mm (W) x 300mm (D).
1210 Dimmer
Order Codes and Descriptions
12 x 2.4kW Models
75901 VX-1225-A
12 channel 2.4kWper channel dimmer rack, Triac, Aust 10A outlets with 1.5m tail and plug.
75902 VX-1225-HW
12 channel 2.4kWper channel dimmer rack, Triac, hard wired outlets with 1.5m tail and plug.
75904 VX-1225-W
12 channel 2.4kWper channel dimmer rack, Triac, 3x 10pin Weiland connections with 1.5m tail and
plug.
75905 VX-1225-S2
12 channel 2.4kWper channel dimmer rack, Triac, 2x 19pin Socapex connections with 1.5m tail and
plug.
6 x 5kW Models
75911 VX-0650-A
6 channel 5kWper channel dimmer rack, SSR, Aust 20A outlets with 1.5m tail and plug.
75912 VX-0650-HW
6 channel 5kWper channel dimmer rack, SSR, hard wired outlets with 1.5m tail and plug.
Philips Entertainment
Australia / New Zealand
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: +649 481 0100
Fax: +649 481 0101
Asia
Unit C, Block C 14/F., Roxy Industrial Centre
No. 41-49 Kwai Cheong Road, Kwai Chung, NT
Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
© Philips Group 2010
All rights reserved.
The Company reserves the right to make any variation in
design or construction to the equipment described. E&OE
www.strandlighting.com
11102011AUNZ