1 Dr. Y VIJAYA KUMAR B. Tech, M. Tech, Ph. D PROFILE

advertisement
Dr. Y VIJAYA KUMAR B. Tech, M. Tech, Ph. D
PROFILE
I, Dr. Y. Vijayakumar currently working as Principal at Shirdi Sai Engineering College
(SSEC), Sai Leo Nagar, Anekal, Bangalore, graduated in Mechanical Engineering in the year 1984
from Sri Venkateswara University College of Engineering, S.V. University – Tirupati, AP and
subsequently acquired Masters Degree in Industrial Engineering from National Institute of
Technology (NIT), Calicut (Kerala) and Ph. D degree in Industrial Engineering (OR & SQC) from Sri
Krishna Devaraya University – Anantapur A.P.
I also served various academic bodies in various
capacities like Governing Council Member, BOE & BOS Member etc., Recently I have been declared
elected as Member of the SECTION MANAGING COMMITTEE of ISTE from Karnataka Section for
the term 2012 - 2014. During the year 2012, I have been awarded “BEST EDUCATIONIST” and a
CERTIFICATE
OF
EDUCATION
EXCELLENCE
by
International
Institute
of
Education
&
Management, Delhi”.
I have 05 Years of Industrial experience at M/s Rashtriya Chemicals & Fertilizers Ltd.,
Chembur, Bombay & M/s Reliance Industries Ltd., (Textile Unit) Bombay and 24 years of teaching
experience in both teaching UG and PG. Four Research scholars have acquired Ph.D Degree under
my supervision at Visvesvaraya Technological University (VTU) and Dr. M G R University (2 each);
Two Scholars have submitted the thesis for the Ph. D degree at J N T U – Anantapur and One
Scholar has submitted the thesis for M. Phil degree at S V University. At present I am guiding Eight
Scholars for Ph. D, and one Scholar for M S in the area of Mechanical Engineering, Industrial
Engineering, Manufacturing, Product Design & Development and Reliability Engineering. During 24
years of teaching, research and consultancy experience, published more than 21 research papers in
referred journals at International level and presented 22 papers at various conferences. Teaching
and
Research
interest
center
on
Industrial
Engineering,
Machinability,
Product
Design
&
Development and Reliability Engineering and conducted several sponsored workshops and
conferences. I am a member of number of professional bodies such as ISTE, IET, SEI, IIPE etc.,
Encouraging and motivating the students and colleagues to do innovative things and working for the
robust growth of the Institution is the key mantra for the success of my career.
Dr. Y. Vijaya Kumar
1
Dr. Y VIJAYA KUMAR B. Tech, M. Tech, Ph. D
Present Position
: Professor & Principal
Department
: Mechanical Engineering
College
: SHIRDI SAI ENGINEERING COLLEGE,
Sai Leo Nagar, Guddanahalli, Anekal,
Bangalore 562 106
1. Name:
YARRAMPALLI
(Surname)
VIJAYA KUMAR
(First Name)
2. Address:
(a) Present Address:
4c, 4th cross, 5th main, Baroda Bank Colony,
J.P. Nagar VII Phase, Puttenahalli, Bangalore 560 078.
Phone: Mobile: 099005 45101, 098457 489 49
Off: 080 – 27840630, Fax No.: 080 – 2245 1802
E Mail: [email protected], [email protected]
(b) Permanent Address:
4c, 4th cross, 5th main, Baroda Bank Colony,
J.P. Nagar VII Phase, Puttenahalli, Bangalore 560 078.
Phone: Mobile: 099005 45101, 098457 489 49
Off: 080 – 27840630, Fax No.: 080 – 2245 1802
E Mail: [email protected], [email protected]
3. Father Name
: GURUMURTHY Y
4. Date of Birth
: 15th August 1962
5. Age
: 51 Years and 6 Months
6. Nationality
: Indian
7. Religion
: Hindu
8. Caste
: Nai Brahmin – 2AG
9. Family
: Wife and Daughter
2
10. Complete Academic Record: B. Tech, M. Tech, Ph. D
Degree and
Specialization
University/Institute
Ph. D – O R & S Q C
M. Tech – Industrial
Engineering
B. Tech –
Mechanical Engg.
P.G Certificate –
Computers &
Applications
Proficiency Course –
Intellectual Property
Rights (IPR)
11. Academic Experience :
Duration
13 – 06 – 2013
To
Till Date
14 – 02 – 2013
To
12 – 06 – 2013
( ¼ year)
01-11-2009
To
13 – 02 - 2013
(03 ¼ years)
01-11-2008
To
01-11-2009
(01 year)
10-07-2006
To
31-10-2008
(02 ¼ years)
05-09-2003
To
30-06-2006
(02 ¾ years)
01-07-1998
To
03-09-2003
(05 ¼ years)
13-11-1996
To
20-06-1998
(01 ½ years)
06-06-1990
To
07-11-1996
(06 ½ years)
S.K. University –
Andhra Pradesh
N.I.T – Calicut University –
Kerala
S.V.U College of Engg,
Sri Venkateswara University–A.P
Year of
Completion
MAY 2004
MAR 1986
JAN 1984
Marks &
Division
Rank
71% &
FCD
76% &
FCD
63% &
I Class
3rd
Place
-
--
N.I.T.I.E – Bombay
SEP 1987
I Class
-
I.I.Sc., Bangalore
SEP 2008
A
Grade
5th
Place
24 Years
Institution / Organization
Designation
Area / Dept.
Shirdi Sai Engineering College,
Sai Leo Nagar, Anekal,
Bangalore – 562 106, Karnataka
Professor
&
Principal
Mechanical
Engineering
M V J College of Engineering
Channasandra, Whitefield
Bangalore, Karnataka
Professor
&
Dean
Mechanical
Engineering
Professor &
Principal /
Dean
Mechanical
Engineering
Professor
&
Vice Principal
Mechanical
Engineering
Professor
&
Head
Mechanical
Engineering
Shirdi Sai Engineering College,
Anekal, Bangalore Rural – 562 106,
Karnataka
Professor
&
Head
Mechanical
Engineering
Adhiyamaan Engineering College,
Dr. M.G.R. Nagar, Hosur – 635 109,
Tamil Nadu
Asst. Professor
&
Head i/c
Mechanical
Engineering
School of Quality Management,
Gundur, Tiruchirapalli – 620 007,
Tamil Nadu
Assistant
Professor
Quality
Management
Dayananda Sagar College of Engg.,
K.S. Layout, Bangalore – 560 078
Karnataka
Lecturer
Industrial
Engineering &
Management
S.B.M. Jain College of Engineering,
Jakkasandra post, Kanakapura Taluk
Bangalore – 562 112.
Karnataka
S.B.M. Jain College of Engg.,
Jakkasandra post, Kanakapura Taluk
Bangalore – 562 112.
Karnataka
S.B.M. Jain College of Engineering,
Jakkasandra post, Kanakapura Taluk
Bangalore – 562 112.
Karnataka
3
12. Industrial Experience :
Duration
10-03-1989
to
12-05-1990
(01¼ years)
17-03-1986
to
09-03-1989
(03 Years)
05 Years
Designation
Department /
Responsibilities
Industrial Engineer
Mgmt Services /
Training &
Planning work
Organization
M/s Reliance Industries Ltd.,
(RIL) Patalganga, Bombay
M/s Rashtriya Chemicals &
Fertilizers Ltd., (RCF)
Chembur, Bombay
Junior Industrial
Engineer –
Mgmt Services /
Training &
Planning work
13. Research Experience
(a)
Sponsored Research Projects:
Year of
Funding
2008
(b)
Sponsoring
Organization
Title of Project
An Experimental Investigation to
Visvesvaraya
optimize Machinability of Al & its
Technological
alloys using Taguchi Methods for
University (VTU)
sustainable growth.
Research – Doctoral Degrees – Awarded:
S.No.
1
2
Name of Student
Mr. S.A.Vsantha
kumara
(1SS04PMM02)
Year of
Registration
VTU Belgaum
2004
Mr. Lakshminarasimhan
S.N.
(1SS03PMM01)
Mr. Anil Kumar. C
(ME 04 D010)
VTU Belgaum
2004
3
Dr. MGR
University Chennai
2004
4
Mr. N.S.Prasanna Rao
Dr. MGR
(ME05D022)
University Chennai
2004
Research – Doctoral Degrees – In progress:
1
Mr. K.S.Lakshminarayan J.N.T.U (31912)
Anantapur
2008
2
Mr. B.S. Praveen Kumar J.N.T.U (31801)
Anantapur
2008
4
Amount of
Grant
Status
2.5 Lakhs
Completed
04
Title of Thesis
A Study on Entrepreneurial
competencies among
students of VTU with special
reference to soft skills
Evaluation of Supply Chain
Systems through Reliability
Analysis
Studies on the Mechanical
fracture and vibrational
behavior of NiTiNol
Theoretical Study of Boundary
Layer Flow Problems in
Newtonian / Non Newtonian
Fluids
08
Study, Analysis & Optimization
of Integrated Reliability Model
for Redundant systems
Study, Analysis & Optimization
of SMAW (Shielded Metal Arc
Welding) Process Parameters
in Fabrication of Pipe Line
Joints
Status
Ph.D
Awarded
Ph.D
Awarded
Ph.D
Awarded
Ph.D
Awarded
Thesis
Submitted
Thesis
Submitted
3
(C)
Mr. Venkat Ramesh
(110109)
J.N.T.U –
Hyderabad
2011
4
Mr. Muzammil Ahmed
5
Mr. Ravi Narayan
6
Mrs. Aruna Kumari C P
7
Mr. Niranjan
8
Mr. R M Sudhakar
JAIN
University
2010
JAIN
University
2010
JAIN
University
2011
JAIN
University
2011
JAIN
University
2012
Integration of Supply chain
with ERP Implementation and
Financial analysis of
Manufacturing firms in
Automotive sector with
reference to Karnataka
Manufacturing
Materials
Supply Chain Management
Manufacturing
Study on opportunities,
Challenges and cost effective
Information Technology
practices for small to medium
sized enterprises
Course
Work
Completed
Course
Work
Completed
Course
Work
Completed
Course
Work
Completed
Course
Work
Completed
Course
Work
Completed
Sponsored Academic Programs:
Year of
Grant
Sponsoring
Organization
2005
VTU & CADD
CENTER B’lore
2006
I S T E – New
Delhi
2007
I S T E – New
Delhi
2007
A I C T E – New
Delhi
2014
ISTE – Karnataka
Chapter
Title of Program
Amount of
Grant
One day work shop on Mechanical
Vibrations & Curriculum Design
ISTE – AICTE Sponsored Training
Programme on Development in FEM
Applications in Mechanical Engineering
ISTE – AICTE Sponsored Training
Programme on Development in FEM
Applications in Mechanical Engineering
AICTE Sponsored Two day National
Seminar in “Trends in E Manufacturing for
Sustainable growth”
11th ISTE Karnataka Student Convention
Rs. 70,000
Rs. 90,000
Rs. 90,000
Rs. 75,000
Rs. 40,000
14. Consulting Experience
Year
Organization
2008
Fire Pro Systems Pvt.
Ltd., Indiranagar,
Bangalore
Paradeep
Phosphates Ltd,
Bhuvaneshwar
Gujarat State
Diamond workers
Association - Surat
1988
1987
Nature of Project
Corporate Training on
Standards, Hydraulics and
Cabling for GET’s of M/s Firepro
Design & Development process
oriented Incentive Scheme
Design & Fixing of Wages for
Diamond cutting labour
5
Co-Consultants
(if any)
Department
Colleagues
Mr. Deshpande.K.W
Mr. K S P Rao
15. Administrative Experience:
Period
13-06-2013
To
Till Date
01-11-2009
To
12-06-2013
(03 ¼ years)
01-11-2008
To
01-11-2009
(01 year)
10-07-2006
To
30-10-2008
(02 ¼ years)
05-09-2003
To
30-06-2006
(02 ¾ years)
01-07-1998
To
03-09-2003
(05 ¼ years)
16 Years
Organization
Designation
Shirdi Sai Engineering
College, Anekal,
Bangalore Rural – 562
106, Karnataka
S.B.M. Jain College of
Engg., Kanakapura,
Bangalore – 562 112
Karnataka
S.B.M. Jain College of
Engg., Kanakapura,
Bangalore – 562 112
Karnataka
S.B.M. Jain College of
Engg., Kanakapura,
Bangalore – 562 112
Karnataka
Shirdi Sai Engineering
College, Anekal,
Bangalore Rural – 562
106, Karnataka
Adhiyamaan
Engineering College
Dr. M.G.R.Nagar, Hosur
– 635 109 T.N
Professor & Principal
Professor & Principal
Professor & Vice
Principal
Professor & Head of
the Department
Professor & Head of
the Department
Asst. Professor &
Head of the
Department
Nature of Responsibility
Managing Academic &
Administrative Activities of
the College
Managing Academic &
Administrative Activities of
the College
Managing Academic
Activities of the College
Managing Department
activities, Labs set up, R&D
Centre set up, Research &
corporate Training.
Managing Department
activities, Technical
association set up &
Student Projects.
Managing Department
activities, intake increased
to 120 & Placement
activities introduced.
15. Present Position:
Designation
Professor and Principal
Organisation
SHIRDI SAI ENGINEERING College
Sai Leo Nagar, Anekal, Bangalore – 562 106, Karnataka
16. Current Areas of Research Specialization
1. Machinability Parameters optimization by using Taguchi Techniques
2. Integrated Reliability Model optimization with multiple constraints
3. Machinability – Effectiveness of various tool inserts
4. SMAW (Shielded Metal Arc Welding) Process optimization
5. Reliability Evaluation of Supply Chain Management
6. Entrepreneur Development Analysis
17. Publications:
a) INTERNATIONAL JOURNAL:
1.
21
“APPLICATION OF SHAPE MEMORY ALLOY NITINOL IN THE FIELD OF DEFENCE”
International Journal of Mechanical Engineering (IJME), July - December 2008, Volume 1,
Number 2, pp. 133 – 135.
6
2.
“A STUDY AND ANALYSIS OF RELIABILITY IN A SUPPLY CHAIN NETWORK”, International
Journal of Engineering Research and Industrial Applications”, (IJERIA), Vol.2, No. VII
(2009), pp 315-327.
3.
“SUPPLY CHAIN SYSTEMS – A RELIABILITY EVALUATION” International Journal of Supply
Chain Management: Research & Practice – Assumption University of Thailand, Bangkok,
ISSN: 1905-9566, Vol. 3, June 2009, pp 14 – 23.
4.
“A SIMPLE CONSTITUTIVE BEHAVIORAL (RICHI MODEL) SYSTEM TO STUDY THE TYPICAL
STRESS – STRAIN CURVE FOR THE SHAPE MEMORY ALLOY [NITINOL]” International
Journal of Intelligent Information Processing Volume 3, Number 1, January – June 2009,
pp 19-25.
5.
“EXAMINING ENTREPRENEURIAL
COMPETENCIES AND THEIR RELATION TO SELF
EMPLOYMENT INTENTIONS AMONG ENGINEERING STUDENTS”, Industry & Higher
Education (IHE), IP Publishing Ltd., London, UK.
6.
“EVALUATION OF A SUPLY CHAIN SYSTEM THROUGH RELIABILITY ANALYSIS – A CASE
STUDY”, International Journal of Multidisciplinary Research and Advances in Engineering
(IJMRAE), Vol.1, No.1, Nov.2009, pp 87 – 100.
7.
“IMPLICATION OF LASER TECHNOLOGY THAN THAT OF SHAPE MEMORY ALLOY (NITINOL)
IN ANGIOPLASTRY”, International Journal of Engineering (IJE), Volume 3, Issue 5,
December 2009, pp. 501 – 509.
8.
“AN EXPERIMENTAL INVESTIGATION TO OPTIMIZE MACHINABILITY OF ALUMINUM ALLOY
6061 T6 USING TAGUCHI METHODS” International Journal of Mechanical Engineering,
June 2011, Vol.4, Issue.1.
9.
“ENTREPRENEURIAL PROPENSITY AND ITS RELATION TO SELF EMPLOYMENT INTENTIONS
AMPNG ENGINEERING AND BUSINESS STUDENTS”, The IUP Journal of Entrepreneurship
Development, Vol. VIII, No.3, September 2011, pp.60-76.
10.
“OPTIMIZATION OF TURNING PARAMETERS FOR MACHINABILITY USING TAGUCHI
METHOD – AN EXPERIMENTAL INVESTIGATION’, International Journal of Science and
Advanced Technology, Vol.1, No.10, December 2011 with ISSN 2221-8386.
11.
“INTEGRATED
RELIABILITY
MODEL
FOR
REDUNDANT
SYSTEMS
WITH
MULTIPLE
CONSTRAINTS”, International Journal of Current Research, Vol.4, Issue.02, pp. 196 –
199, February, 2012, ISSN: 0975-833X with impact factor of 0.525.
12.
“REDUNDANCY
ALLOCATION
FOR
SERIES
PARALLEL
SYSTEMS
WITH
MULTIPLE
CONSTRAINTS AND SENSTIVITY ANALYSIS”, IOSR Journal of Engineering, March 2012,
Vol. 2(3), pp: 424-428, ISSN: 2250-3021.
13.
“APPLICATION OF TAGUCHI METHOD FOR OPTIMIZATION OF RESISTANCE SPOT
WELDING OF AUSTENSITE STAINLESS STEEL AISI 301L”, International Journal of
Innovative Systems Design and Engineering, ISSN 2222-1727, Vol.3, No.10, 2012.
14.
“INTEGRATED RELIABLITY MODEL AND FAILURE MODES EFFECT AND CRITICALITY
ANALYSIS FOR OPTIMUM RELIABILTY”, International Journal of Research in Computer
Application and Management, Vol.2, April.2012, Issue No.4, ISSN2231-1009.
7
15.
“OPTIMIZATION OF SHIELDED METAL ARC WELDING PARAMETERS FOR WELDING OF
PIPES BY USING TAGUCHI APPROACH”, International Journal of Engineering Science and
Technology [IJEST], Vol.4, No.5, May 2012, pp. 2083 – 2088 with ISSN: 0975 – 5462.
16.
“SELECTION OF OPTIMUM PROCESS PARAMETERS OF SHIELDED METAL ARC WELDING
(SMAW) TO WELD STEEL PIPES BY DESIGN OF EXPERIMENTS”, International Journal of
Engineering Research and Applications [IJERA], Vol.2, Issue.5, Sept – October 2012, pp.
377-381 with ISSN: 2248-9622.
17.
OPTIMIZATION OF SHIELDED METAL ARC WELDING PARAMETERS FOR WELDING OF
PIPES BY USING TAGUCHI APPROACH”, International Journal of Engineering Research and
Applications [IJERA], Vol.3, Issue.3, May – June 2013, pp. 1460 – 1465 with ISSN: 2248
– 9622.
18.
“AN EFFECTIVE WAY TO OPTIMIZE KEY PERFORMANCE FACTORS OF SUPPLY CHAIN
MANAGEMENT (SCM)”, International Journal of Management [IJM], 2013.
19.
“BENEFITS OF STRATEGIC SUPPLIER INTEGRATION IN MANUFACTURING INDUSTRY”,
Asia Pacific Journal of Research – A peer Reviewed International Journal, ISSN – 2320 –
5504, October – 2013, Volume – III, Issue – X, pp 164 – 168.
20.
“ROBUST DESIGN OF PROCESS PARAMETERS OF SHIELDED METAL ARC WELDING
(SMAW) TO WELD MILD STEEL OF 48X3MM BY DR. GENECHI TAGUCHI METHOD”,
International Journal of Applied Engineering Research, Vol.8, Number 3,2013, pp. 321 –
327 with ISSN: 0973-4562.
21.
“BENEFITS OF STRATEGIC SUPPLIER INTEGRATION IN MANUFACTURING INDUSTRY”, A
Peer reviewed International Journal – Asia Pacific Journal of Research, Vol.3, Issue. X,
October 2013, pp. 164 – 168.
b) NATIONAL JOURNAL:
1.
04
“OPTIMIZATION OF INTEGRATED RELIABILITY MODEL (IRM) FOR REDUNDANT SYSTEMS”
in Technology spectrum – Journal of Jawaharlal Nehru Technological University, July
2008, pp. 94 – 100.
2.
“ACHIEVING DESIRED MECHANICAL PROPERTIES BY USING DESIGN OF EXPERIMENTS
(DOE)” in Engineering Today – Journal of Technological World during May 2002.
3.
“ACHIEVING COMPETITIVE EXCELLENCE THROUGH H.R.M” in Engineering Today – Journal
of Technological World during March 2002, pp.43 – 48.
4.
“ENTREPRENEURIAL
PROPENSITY
AND
ITS
RELATION
TO
SELF-EMPLOYMENT
INTENTIONS AMONG ENGINEERING AND BUSINESS STUDENTS: A COMPARATIVE CASE
STUDY” in The IUP Journal of Entrepreneurship Development, Vol. VIII, No. 3, September
2011, pp. 60 – 76.
c) CONFERENCES OUT SIDE INDIA:
8
02
1.
Paper accepted for presentation titled “Optimization of Integrated Reliability Model for
Redundant systems with multiple constraints” at 2008 IEEE International Conference on
Industrial Engineering & Engineering Management at Singapore in the year 2007.
2.
Paper accepted for presentation titled “Evaluation of Quality cost by using ABC Costing
Method” at 9th Annual International Conference on ISO 9000 & Exhibits at Orlando,
Florida USA during 19 -20 February 2001.
d) CONFERENCES IN INDIA - INTERNATIONAL:
1.
Presented a
paper titled
“COMBINATION OF
08
BPR AND ISO 9000 FOR BETTER
PERFORMANCE – DSS APPROACH” during the International Conference on Quality
Engineering and Management held at PSG College of Technology Coimbatore during 4th to
6th August 1997, pp560 – 566.
2.
Presented a paper titled “EVALUATING THE ECONOMICAL BENEFITS OF A QUALITY
SYSTEM
USING
CORNING’S
APPROACH”
during
the
International
Conference
on
Operational Research for a better Tomorrow organized by Operational Research Society
of India – Delhi Chapter, during 24 – 26 December 1998, pp 64.
3.
Presented a paper titled “EVALUATION OF SERVICE QUALITY BY USING DESIGN OF
EXPERIMENTS” during International Conference on Quality, Reliability and Information
Technology at the turn of the millennium (Trends and Future Directions) held at Indian
National Science Academy, New Delhi during 21st to 23rd December 2000, pp 23.
4.
Presented a paper titled “AN OPTIMUM WAY TO FIX STANDARDS FOR SERVICE
PARAMETERS
Conference
TO
on
MEASURE
Optimization
QUALITY
–
Techniques
D.O.E.
and
its
APPROACH”
during
applications
in
International
Engineering
and
Technology held at Raja Balwant Singh College – Agra during 22nd & 23rd September2001, pp 18.
5.
Presented a paper titled “AN OPTIMUM RELIABILITY OF A PRODUCT WITH DESIGN OF
EXPERIMENTS” during International Conference on Operations research for Development
(ICORD 2002) & XXXV Annual Convention of the ORSI held at Anna University - Chennai
during 27th to 30th December 2002, pp 42.
6.
Presented a paper titled “AN OPTIMIZATION OF INTEGRATED RELIABILITY MODEL WITH
MULTIPLE CONSTRAINTS” during 2nd International Conference on Quality, Reliability and
Information Technology (Trends and future directions) organized by Indian National
Science Academy New Delhi & Delhi University during 18 – 20 December – 2003, pp 73.
7.
Presented a paper titled “ON A CLASS OF INTEGRATED RELIABILITY MODELS FOR
REDUNDANT SYSTEMS WITH MULTIPLE CONSTRAINTS” at International Conference on
Operations Research for a growing nation in conjunction with the 41st annual convention
of operational research society of India (ORSI), during 15 – 17 December 2008, at S.V
University Tirupati, pp 110.
9
8.
Presented a Paper titled “A SIMPLE CONSTITUTIVE BEHAVIORAL SYSTEM TO STUDY THE
TYPICAL STRESS STRAIN CURVE FOR SHAPE MEMORY ALLOY (NITINOL)” at the Fifty –
Third Congress of Indian Society of Theoretical and applied Mechanics (ISTAM – 2008) –
an International Meet”, during December 27 – 30, 2008, at University College of
Engineering (A), Osmania University, Hyderabad, pp 45 - 49.
9.
Presented a paper titled “CAST IRON PROPERTIES – ADDITION OF ALLOYS AND CHILLING
TECHNIQUES, A REVIEW” at the Joint International Conference on Advanced Materials –
2011, ICAM 2011, during 19th – 20th August 2011, at B T L Institute of Technology,
Bangalore, pp 18 – 23.
10.
Presented a paper titled “OPTIMUM PRODUCT DESIGN AND DEVELOPMENT THROUGH
CREATIVE ENGINEERING METHODOLOGY” during the International Conference ICIRS-6
held at during April 2013.
e) CONFERENCES IN INDIA - NATIONAL:
1.
14
Presented a paper titled “A STUDY & ANALYSIS OF MACHINABILITY AND ITS EFFECT ON
SURFACE ROUGHNESS DURING TURNING OPERTION” during A National Conference on
Emerging Trends in Engineering Technology & Applications – NCETETA ’09, held at Shirdi
Sai Engineering College, Anekal, Bangalore during 29th & 30th April – 2009, pp 486 – 487.
2.
Presented a paper titled “PERFORMANCE OPTIMIZATION OF INTERNAL COMBUSTION
ENGINE USING TAGUCHI METHOD” during the National Conference on Recent trends in
Mechanical Engineering Sciences - RTIMES, held at Sri Siddhartha Institute of Technology
during 21 – 22nd February 2008, pp 95 – 102.
3.
Presented a Paper titled “OPTIMUM BLENDING OF POWDERS TO ATTAIN DESIRED
MECHANICAL PROPERTIES BY DESIGN OF EXPERIMENTS” at Second National Conference
on Mechanical Engineering, during 11 – 12th March 2005, organized by Ghousia College of
Engineering.
4.
Presented a paper titled “ANALYSIS OF A PARALLEL – SERIES RELIABILITY SYSTEM WITH
MULTIPLE CONSTRAINTS” at National Conference on Advances in Mechanical Engineering
Sciences NACAMES - 04 organized by Sri Siddhartha Institute of Technology, Tumkur,
during 24 – 25, September 2004, PP 48.
5.
Presented a paper titled “OPTIMIZATION OF PRODUCT QUALITY THROUGH RELIABILITY
UNDER W.T.O. REGIME” during 26th National Conference of I.A.M.D. & I.U.C.B.E.R. held
at Vijaynagar Institute of Management Studies - Bellary during 7th to 9th February 2002,
pp 27.
6.
Presented a paper titled “ROLE OF INTERNET IN THE FAST DEVELOPING TECHNICAL
EDUCATION SCENARIO” during Fifth National Convention of I.S.T.E. held at Periyar
Maniammai College of Technology for Women during 12th October - 2002.
7.
Presented a paper titled “MULTIFOLD REDUCTION OF DEFECTS BY USING SIX SIGMA
TECHNIQUE” during The National Seminar on Recent Trends in Production / Operations
10
Management, organized by Annamalai University, Annamalai Nagar, Tamil Nadu, during
19 – 20 January 2001, pp 73 – 77.
8.
Presented a paper titled “EVALUATING QUALITY OF SERVICE BY USING DESIGN OF
EXPERIMENTS” during the Two Day National Seminar on Emerging issues in Services
Sector Development – Sponsored by UGC, organized by School of Management studies –
CBIT, Hyderabad, during 23 – 24 March 2001.
9.
Presented a paper titled “ACHIEVING COMPETITIVE EXCELLENCE BY USING SIX SIGMA
STATISTICAL TECHNIQUE” during the Two Day National Seminar on Emerging issues in
Services Sector Development – Sponsored by UGC, organized by School of Management
studies – CBIT, Hyderabad, during 23 – 24 March 2001.
10.
Presented a paper titled “ACHIEVING DESIRED MECHANICAL PROPERTIES BY BLENDING
POWDERS USING STATISTICAL DESIGN OF EXPERIMENTS” during Advances in Metal
forming – Procedings of the National Seminar METFORM – 2000, organized by MIT
Campus, Anna University, Chennai, during 15 – 16 March 2000, pp 108 – 112.
11.
Presented a paper titled “HRM ROLE IN ACHIEVING COMPETITIVE EXCELLENCE” during
National Seminar on Contemporary issues in Management held at Department of Business
Administration, Mangalore University Mangalore during 12th & 13th October 2000.
12.
Presented a paper titled “AN OPTIMUM WAY TO EVALUATE THE ECONOMIC BENEFITS OF
A QUALITY SYSTEM USING CORNING’S APPROACH” during National Conference on
Standardization - NACOSTAN held at Bangalore organized Institution of Standards
Engineers – Bangalore Section, 19 – 20 February 1999, pp 2-4/1 to 2-4/5.
13.
Presented a paper titled “STATISTICAL DESIGN OF EXPERIMENTS FOR PREDICTING AN
OPTIMUM BLENDING OF POWDERS TO ATTAIN DESIRED MECHANICAL PROPERTIES”
during National Conference on Quality Control in Metallurgical Industries, held at PSG
College of Technology, Coimbatore, during 29 & 30th September 1999, pp 61 – 66.
14.
Presented a paper titled “STRATEGIC COST MANAGEMENT APPROACH FOR OPTIMUM
QUALITY COSTS USING VALUE CHAIN ANALYSIS” during National Conference on
Intelligent Manufacturing Systems – A Technology watch held at Coimbatore Institute of
Technology during 6th to 7th February 1998, pp p9.1 to p9.8.
15.
Presented a paper titled “OPTIMAL PRODUCT DESIGN & DEVELOPMENT THROUGH
CREATIVE ENGINEERING METHODOLOGY” during National Conference on Knowledge
Utsav held at School of Engineering and Technology during
16.
Presented a paper titled “OPTIMUM PRODUCT DESIGN AND DEVELOPMENT THROUGH
CREATIVE ENGINEERING METHODOLOGY” during National Conference on Emerging
Trends in Engineering and Management” held at
17.
f) WORKSHOPS:
06
11
1.
Attended a Three Day workshop on “Trainers’ Training Programme on Entrepreneurship
Development Orientation” during 15th to 17th April 2005, jointly organized by VTU
Belgaum and Centre for Entrepreneurship Development of Karnataka.
2.
Attended AICTE sponsored Two day Seminar on “REFORMS IN THE CONDUCT OF
EXAMINATION PROCESS” held on December 4th & 5th 2004, organized by VTU Belgaum.
3.
Attended a one day program on “MICRO TEACHING TRAINING” on 29-11-2003, organized
by Government Tool Room & Training Centre, Bangalore.
4.
Attended a three day National Workshop on “TAGUCHI METHOD BASED QUALITY
ENGINEERING TECHNIQUES” during February, 18 – 20, 2001, organized by Department
of Mechanical Engineering, Arunai Engineering College, Tiruvannamalai – 606603, Tamil
Nadu, sponsored by AICTE New Delhi.
5.
Attended a one week National Workshop on “MANAGING MANAGEMENT SCHOOLS” during
January 02 – 06, 2001, organized by Xavier Institute of Management & Entrepreneurship
(XIME) Koramangala, Bangalore – 560 034.
6.
Attended a one day program on “NBA ACCREDITATION – A HALL MARK IN TECHNICAL
EDUCATION” on 27-11-2001, organized by Kongu Engineering College, Erode – 638052.
18. Awards, Honours and Recognitions
1.
Awarded as “BEST EDUCATIONIST” AND A CERTIFICATE OF EDUCATION EXCELLENCE by
International Institute of Education & Management, Delhi”
2.
Elected as Member of Section Managing Committee of ISTE from Karnataka for the
term 2012 – 2014.
3.
Selected as BEST SUB ORDINATE during 1986 – 87 at M/s Rashtriya Chemicals &
Fertilizers Ltd., Chembur, Bombay.
19. Other Relevant Information supporting the application
1.
Chief Coordinator of VTU Valuation Centre for Civil & its allied branches.
2.
Life Member of ISTE (Indian Society for Technical Education)
3.
Life Member of SEI (Standards Engineers India)
4.
Evaluated several D. Litt, Ph. D and M .Tech Project / Thesis works of several Universities.
5.
Delivered several GUEST LECTURES.
6.
Member of BOS – Faculty of Engineering Sciences JAIN University
7.
Chaired the Technical session at National Conference on Recent Trends in Manufacturing
Technology and Management held at Adhiyamaan College of Engineering during 28– 29
Jan, 2002.
8.
Chaired the Technical session at First International Conference on Frontier Technologies –
Need for the industry, Business and Education, organized by ISTE Chapter Adhiyamaan
College of Engineering, during 6th – 8th Sep 2006.
12
9.
Advisory Member & Chaired the Technical Session at a National Conference on Emerging
Trends in Engineering Technology & Applications held at Shirdi Sai Engineering College,
during 29 – 30 April, 2009.
20.
Vi s i o n / G o a l
The rapid and phenomenal expansion of Technical Education & Training in India, Conflict
expectations of stakeholders and statutory requirements of various Government agencies made
the Institutes vibrant. To survive and grow in the positive direction there is no other go for the
institution other than building the Institution with 4 pillars 1. Academic 2. Research 3. Placement
& 4. Consultancy. To drive in right direction, I want to become part of institution by setting
innovative goals with clear objective and Leadership qualities.
(a) Referee No. 1: Dr. C Chandra Shekar
Professor, Department of Computer Science, IIT Madras, Chennai – 600 036
Phone: 044 22578341, 044 22579341 Fax No.:
eMail: [email protected]
(b) Referee No. 2: Dr. C. UMA SHANKAR
Professor & Chairman, Department of OR & SQC, Rayalaseema University, Kurnool, Andhra
Pradesh. Phone: 09441263963 e Mail: [email protected]
Date : 01.02.2014
Place : Bangalore
Signature
13
Download