upm slick2fnl.qk
12/14/98 9:50 AM
Page 2
Introducing the New UPM
Control from Bodine
DIP Switches for Quick
System Configuration
The new UPM control features seven
DIP switches to simplify configuration
of speed regulation and current limit.
With most Bodine motors the “out of
the box” system speed regulation is better
than 2% and the current limit is at least
200% of the motor nameplate rating.
The control also includes mating
connectors and a 10k Ohm speed pot
with every control.
Diagnostic
Lights
Two LED lights are built
into the UPM control.
A green light indicates that
the control is powered.
A red light indicates when
output current exceeds the
limit set by the TORQ pot.
Speed Regulation Pot
Speed regulation can be adjusted to fine
tune the control and motor system for
the customer’s specific application.
Standard
Mounting
The footprint is
interchangeable with
similar controls.
Adjustable Control
Parameters
The customer can utilize these five pots
to modify minimum speed limit, maximum
speed limit, torque limit, acceleration time,
and deceleration time.
Choice of Connections
Two models of the UPM control are
available. Model 0866 (shown) has a
plug-in terminal block. Model 0865 has
1/4” quick connect tabs.
Dual Input and Output Voltages
The UPM control operates either from 115 or 230 VAC, and
outputs either 0-90 or 0-180 VDC. Customers can use it for
both U.S. and European applications.
The Bodine UPM-3318C is a small unfiltered SCR chassis speed control for
brush-type DC motors. The UPM control offers many features in a compact package,
making it an ideal match with Bodine PM motors and gearmotors. Call today to find
out how Bodine’s newest addition to their motion control line can work for you.
®
2500 W. Bradley Place, Chicago, Illinois 60618 Phone: 773-478-3515 Fax: 773-478-3232
www.bodine-electric
upm slick2fnl.qk
12/14/98 9:49 AM
Page 1
UPM UNFILTERED SCR DC CHASSIS CONTROLS
STANDARD FEATURES
• Operates from 115 Volt AC or 230 Volt AC line,
selectable with plug-in jumper
• Switchable output for 0-90 Volt DC or 0-180 Volt DC
• Back EMF feedback maintains better than 2% system
speed regulation
• DIP switches to easily calibrate control for different
motor sizes
• Two diagnostic LEDs indicate when power is on and
when current output is at limit set by TORQ pot
• Six on-board user-adjustable pots for torque limit,
minimum speed limit, maximum speed limit, acceleration time, deceleration time and speed regulation
• Speed can be adjusted manually using a remote
10K speed pot (included with control)
• Unfiltered drive draws lower AC line current as
compared to SCR filtered controls
• Connections for optional user-supplied inhibit switch
APPLICATION INFORMATION
• Rated for continuous operation in 50° C ambient
with no additional heat sink
• Drives Bodine 130 Volt and 180 Volt permanent
magnet DC motors
• Drives 90 Volt and 180 Volt “SCR rated” and 130
Volt “PWM rated” permanent magnet DC motors
made by other manufacturers
• Connections made to model 0865 with 0.25" quick
connect tabs. Seven mating terminals supplied with
control. Connections made to model 0866 with
pluggable terminal block (supplied with control)
Model Number
HP
Rating
1/3
Input Voltage Output Voltage Continuous Output Peak Output Current Form
(VAC)
(VDC)
Current (Amps)
(Amps)
Factor
115/230
0-90/0-180
2.1
4.2
1.6
Weight
(lbs.)
1.0
Product 1/4 QC tab Terminal block
Type
connection
connection
UPM-3318C
0865
0866
DIMENSIONS
1.50
3.64
2.50 (TYP.)
3.80 (TYP.)
.09
(REF.)
1.25
.25
(TYP.)
4.30
.50
(TYP.)
.094 R. SLOTS
(6 PLACES)
.95
(TYP.)
®
2500 W. Bradley Place, Chicago, Illinois 60618
Phone: 773-478-3515 Fax: 773-478-3232
www.bodine-electric
P/N 074 81026B (ZY)