Effective: June 2007 Series MIZ Piezoelectric Mini Horns TM R Protection Systems A UTC Fire & Security Company F-75-002 FEATURES • • • • • • • • • • • Approvals: UL 464. FM, CSFM and MEA Pending. Field selectable settings for Temporal (Code 3) or Continuous Horn (MIZ-TC models). Designed to meet or exceed NFPA/ANSI standards. Convenient mounting to any standard single gang box. No additional trimplate required for flush mounting. Fast installation with In/Out screw terminals using #12 to #18 AWG wire. High sound output/low current draw/low temperature compensation. Available in red or off-white color. 24 Vdc models with wide listed voltage range, filtered DC and FWR. Polarized inputs for compatibility with standard reverse polarity type supervision of circuit wiring by an alarm panel. Low cost installation via standard electrical boxes. Attractive flush or surface mounting options. DESCRIPTION The Fenwal Series MIZ piezoelectric Mini Horns are compact electronic alarm signals that are listed under UL 464 for Audible Appliances in public mode Fire Protection Systems. They are ideal for alarm signaling in individual rooms, apartments, hotels, motels and offices where attractive appearance dependable performance and economical installation are prime concerns. The MIZ-TC models offer field selectable setting for Temporal (Code 3) or Continuous Horn along with an attractive appearance and dependable performance. The Series MIZ offers high sound output along with low current draw and are available with color choices of red or off-white which will blend with any decor. The Series MIZ signals are rated for 24 Vdc input and may be used with filtered or unfiltered (full-wave-rectified) input voltages. The Series MIZ Signals have IN/OUT wiring terminations that accept two #12 to #18 AWG wires at each terminal. Inputs are polarized for compatibility with standard reverse polarity type supervision. SPECIFICATIONS Table 1. dBA Levels and Current Ratings Anechoic Voltage (Vdc) Model Continuous Temporal (Code 3) dBA @ 10 ft. Current (Amps) dBA @ 10 ft. Current (Amps) N/A MI Z -24-R 24 90 .012 N/A MI Z -24-W 24 90 .012 N/A N/A MI Z -TC24-R 24 87 .017 88 .017 MI Z -TC24-W 24 87 .017 88 .017 Reverberant per UL 464 Voltage (Vdc) Model Continuous Temporal (Code 3) dBA @ 10 ft. Current (Amps) dBA @ 10 ft. Current (Amps) MI Z -24-R 24 85 .017 N/A N/A MI Z -24-W 24 85 .017 N/A N/A MI Z -TC24-R 24 83 .017 79 .017 MI Z -TC24-W 24 83 .017 79 .017 WIRING DIAGRAM FROM PRECEDING + _ APPLIANCE OR FACP TO NEXT + _ APPLIANCE OR EOLR + _ Figure 1. Wiring Diagram INSTALLATION NOTES WARNING Failure to comply with the installation instructions could result in improper installation, application, and/or operation of these products in an emergency situation, which could result in property damage and serious injury or death. 1. Mini Horn models are listed for indoor use with a temperature range of 32°F to 120°F (0°C to 49°C) and maximum humidity of 85% RH. 2. Rated input voltage (either filtered DC or unfiltered full-wave-rectified FWR): 18-31 Vdc (for 24 Vdc MIZ models) and 16-33 Vdc (for 24 Vdc MIZ-TC models). 3. Contact Fenwal for Installation Instructions on these products. These materials contain important information that should be read prior to specifying or installing these products including: • Total current required by all appliances connected to system secondary power sources. • Fuse ratings on notification appliance circuits to handle peak currents from all appliances on those circuits. • The voltage applied to these products must be within their rated voltage range. • Conductor size (AWG), length and ampacity should be taken into consideration prior to design and installation of these products, particularly in retrofit installations. 4. Fenwal notification products must be used within the published specifications and must be PROPERLY specified, applied, installed, operated, maintained and operationally tested in accordance with their installation instructions at the time of installation and at least twice a year or more often and in accordance with local, state and federal codes, regulations and laws. Specification, application , installation, operation, maintenance and testing must be performed by qualified personnel for proper operation in accordance with all of the latest National fire Protection Association (NFPA), Underwriters’ Laboratories (UL), National Electrical Code (NEC), Occupational Safety and Health Administration (OSHA), local, state, count, province, district, federal and other applicable building and fire standards, guidelines, regulations, laws and codes including, but not limited to, all appendices and amendments and the requirements of the local authority having jurisdiction (AHJ). ORDERING INFORMATION Part No. Model No. Input Voltage Horn Pattern Color Mounting Options* 75-000020-001 MI Z -24-R 24 Vdc Continuous Red A, B 75-000020-002 MI Z -24-W 24 Vdc Continuous White A, B 75-000025-001 MI Z -TC24-R 24 Vdc Continuous or Temporal Red A, B 75-000025-002 MI Z -TC24-W 24 Vdc Continuous or Temporal White A, B *See Figures 2 and 3 for Mounting Options. FLUSH MOUNTING OPTION A SINGLE-GANG X 3 ½”DEEP BACKBOX MAXIMUM NUMBER OF CONDUCTORS IS 4 FOR awg #18, #16, #14 AND #12. Figure 2. Flush Mounting SURFACE MOUNTING OPTION B SINGLE-GANG X 1 3/4” DEEP WIREMOLD BACKBOX MAXIMUM NUMBER OF CONDUCTORS IS 4 FOR awg #18, #16, #14 AND #12. Figure 3. Surface Mounting ARCHITECTS AND ENGINEERS SPECIFICATIONS The notification appliance shall be a Fenwal Series MIZTC audible appliance or approved equal. The notification appliance shall be electronic and shall have field selectable settings for Temporal (Code 3) or Continuous horn. The sound pressure measurement on Temporal (Code 3) setting shall be 87 dBA minimum at 24 Vdc and 86 dBA minimum at 12 Vdc. Operating voltages shall be 24 Vdc using filtered power or unfiltered power supply (full-waverectified). In application where only continuous horn is required, the notification appliance shall be a Fenwal Series MIZ audible appliance or approved equivalent. Sound pressure measurement at 10 feet shall be 90 dBA minimum at 24 Vdc and 88 dBA minimum at 12 Vdc. Operating voltages shall be either 12 Vdc or 24 Vdc using filtered power or unfiltered power supply (full wave rectified). All models shall have provision for standard reverse polarity type supervision and in/out wiring using terminals that accept #12 to #18 AWG wiring. The appliances shall be mounted indoors and mount to standard electrical backboxes requiring no additional trimplated or adapters. Fenwal is a registered trademark of Kidde-Fenwal Inc. TM This literature is provided for informational purposes only. KIDDE-FENWAL, INC. assumes no responsibility for the product’s suitability for a particular application. The product must be properly applied to work correctly. If you need more information on this product, or if you have a particular problem or question, contact KIDDE-FENWAL, INC., Ashland, MA 01721. Telephone: (508) 881-2000. F-75-002 Rev AB © 2007 Kidde-Fenwal Inc. Printed in USA R Protection Systems A UTC Fire & Security Company 400 Main Street Ashland, MA 01721 Ph: 508.881.2000 Fax: 508.881.8920 www.fenwalfire.com