3DC11LP
3-Axes Transponder Inductor (3DCoils)
SMD 3D Coil 13x11.6x3.15 mm MAX (2.38 mH – 7.2 mH) Low profile
Characteristics
- Offers 3 coils, oriented in the 3 space axes, assembled in a single component with
full functionality.
- Suitable for automotive applications (Keyless Entry Systems, RTPMS), etc.
- Very good electrical performance in the smallest dimensions.
- High stability in temperature (-40ºC to +85ºC).
- High sensitivity values.
- The inductivity in each axis can be customized to achieve customer requirements.
- Designs at lower frequencies, 20 kHz or 40 kHz, show
a very good electrical performance as well.
Dimensions and recommended pad layout
Pins coplanarity 0.15mm
Tolerances unless otherwise specified: ±0.20mm
All dimensions in mm
Electrical specifications
P/N
L
SRFx,y SRFz DCRx,y DCRz Sensitivity x,y,z
Qx,y,z Freq Cres
Length Width Height
x,y,z
(kHz) (kHz) (Ohm) (Ohm) (mV/App/m)
Min (KHz) (pF)
(mm) (mm) (mm)
(mH)
Min Min
Max Max
Min
3DC11LP-0238J
3DC11LP-0247J
3DC11LP-0345J
3DC11LP-0405J
3DC11LP-0477J
3DC11LP-0491J
3DC11LP-0720J
2.38
2.47
3.45
4.05
4.77
4.91
7.20
25
25
29
30
30
32
25
125
125
125
125
125
125
125
680
656
470
400
340
330
225
500
500
400
400
370
350
330
900
800
800
600
600
600
500
50
50
60
67
70
74
84
50
50
70
67
96
98
120
40
50
55
60
65
65
72
13
13
13
13
13
13
13
11,6
11,6
11,6
11,6
11,6
11,6
11,6
3,15
3,15
3,15
3,15
3,15
3,15
3,15
This chart is a reference guide for the most common required values at working frequency of 125 kHz. Any other inductance value
at LF or tighter tolerances can be provided. Also can be supplied different inductance values in the different winding axis. Please
contact our sales department for any inquiry.
L and Q factor measured at 125 kHz, 1 Vac.
Sensitivity measured with Helmholtz coils H=8.36 App/m @125 kHz. Contact us for measurement specification.
SRF: Self Resonant Frequency of the coil.
36
3DC11LPCAP
3-Axes Transponder Inductor (3DCoils)
SMD CAP 3D Coil 13x12.8x3.7 mm (2.38 mH - 7.2 mH) Low Profile
Characteristics
- Evolution of the 3DC11LP series.
- The cap, made of high quality plastic material,
improves the mechanical protection to the coil.
- Keyless Entry Systems is a typical application for
this coil.
- Very good electrical performance.
- High stability in temperature (-40ºC to +85ºC).
- High sensitivity values.
- The inductance in each axis can be customized to
ssachieve customer requirements.
- Designs at lower frequencies, 20 kHz or 40 kHz,
show a very good electrical performance as well.
Dimensions and recommended pad layout
All dimensions in mm
Tolerances unless otherwise specified: ±0.20mm
Electrical specifications
P/N
L
Q
FreSRF x,y SRF z DCR DCR Sensitivity
Cres
Length Width Height
x,y,z x,y,z quency
(kHz) (kHz) x,y (Ω) z (Ω) x,y,z (mVpp/
(pF)
(mm) (mm) (mm)
(mH) Min (kHz)
Min
Min Max Max App/m) Min
3DC11CAP-0238J 2.38
3DC11CAP-0491J 4.91
3DC11CAP-0720J 7.20
25
32
25
125
125
125
680
330
225
500
350
330
900
600
500
50
74
84
50
98
120
40
65
72
13.0
13.0
13.0
12.8
12.8
12.8
3.7
3.7
3.7
This chart is a reference guide for the most common required values at working frequency of 125 kHz. Any other inductance value
at LF or tighter tolerances can be provided. Also can be supplied different inductance values in the different winding axis. Please
contact our sales department for any inquiry.
L and Q factor measured at 125 kHz, 1 Vac.
Sensitivity measured with Helmholtz coils H=8.36 App/m @125 kHz. Contact us for measurement specification.
SRF: Self Resonant Frequency of the coil.
37
3DC15CAP
3-Axes Transponder Inductor (3DCoils)
SMD CAP 3D Coil 17.5x16x4.30 mm MAX (2.47 mH – 7.2 mH)
Characteristics
- Evolution of the 3DC15 series.
- The cap provides an additional mechanical
protection to the coil, combined with a high
performance in temperature.
- Also, the cap allows an easier handling and placing
aof the part.
- High drop test resistance (up to 500 times 1m) due
ato a maximized pin area.
- High stability in temperature (-40ºC to +85ºC).
- Isotropic version available.
- Designed for 125 kHz and 134 kHz.
Dimensions and recommended pad layout
All dimensions in mm
Tolerances unless otherwise specified: ±0.20mm
Pins coplanarity 0.15mm
Electrical specifications
Código
L
Q
FreSRF x,y SRF z DCR DCR Sensitivity
Cres
Length Width Height
x,y,z x,y,z quency
(kHz) (kHz) x,y (Ω) z (Ω) x,y,z (mVpp/
(pF)
(mm) (mm) (mm)
(mH) Min (kHz)
Min
Min Max Max App/m) Min
3DC15CAP-0247J 2.47
3DC15CAP-0491J 4.91
3DC15CAP-0720J 7.20
23
27
30
125
125
125
656
330
225
500
350
330
1000
750
700
75
105
120
75
140
172
55
85
95
16.0
16.0
16.0
17.5
17.5
17.5
4.3
4.3
4.3
This chart is a reference guide for the most common required values at working frequency of 125 kHz. Any other inductance value
at LF or tighter tolerances can be provided. Also can be supplied different inductance values in the different winding axis. Please
contact our sales department for any inquiry.
L and Q factor measured at 125 kHz, 1 Vac.
Sensitivity measured with Helmholtz coils H=8.36 App/m @125 kHz. Contact us for measurement specification.
SRF: Self Resonant Frequency of the coil.
41
3DC1515
3-Axes Transponder Inductor (3DCoils)
SMD 3D Coil 17.5x15.5x3.8 mm MAX (2.47 mH – 10mH)
Characteristics
- This 3D coil, RFID innovate component, highlights for its high sensitivity, low
profile and small size.
- Ensures optimal field sensing regardless position.
- Best choice for Keyless Entry Systems.
- High drop test resistance (up to 500 times 1m) due to a maximized pin area.
- High stability in temperature (-40ºC to +85ºC).
- Isotropic version available.
- With cover cap or labeled.
- Designed for 125 kHz and 134 kHz.
Dimensions and recommended pad layout
Main applications
Automotive.
- Pasive keyless entry and Keyless
Go systems.
- TPMS with wake up functions.
Industrial.
- Access control.
- Tracking devices.
All dimensions in mm
Tolerances unless otherwise specified: ±0.20mm
Pins coplanarity 0.15mm
Electrical specifications
P/N
L x,y,z
Cres (pF)
(mH)
Qx,y
SRFx,y SRFz(KHz) RDC max
RDC
Sensitivity x,y,z
typ (KHz) min
min
x,y (Ω) max z(Ω) (mVpp/App/m)
3DC15-0247J
3DC15-0258J
3DC15-0345J
3DC15-0405J
3DC15-0477J
3DC15-0491J
3DC15-0720J
3DC15-1000J
2.47
2.58
3.45
4.05
4.77
4.91
7.20
10.00
>23
>23
>27
>27
>28
>27
>30
>25
656
628
470
400
340
330
225
162
>500
>500
>450
>400
>380
>350
>330
>250
>1000
>800
>800
>800
>800
>750
>700
>550
75
75
85
98
100
105
120
165
75
75
100
98
136
140
172
258
>55
>57
>67
>72
>85
>85
>95
>105
This chart is a reference guide for the most common required values at working frequency of 125 kHz. Any other inductance value
at LF or tighter tolerances can be provided. Also can be supplied different inductance values in the different winding axis. Please
contact our sales department for any inquiry.
L and Q factor measured at 125 kHz, 1 Vac.
Sensitivity measured with Helmholtz coils H=1.27 App/m @125 kHz. Contact us for measurement specification.
SRF: Self Resonant Frequency of the coil.
40
3DCoil11LP-AOI-XXXXJ
3DCoil11LP-AOIF-XXXXJ (foam option)
3DCoil11LP-AOIC-XXXXJ (cap option)
SMD 3D11 Coil Low Profile AOI 13x11.6x3.45 mm
C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas. Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321
E-mail: info@grupopremo.com Web http://www.grupopremo.com
1. Dimensions and Pad Layout
All Dimensions in mm. Pins Coplanarity 0.10mm. General Tolerances unless indicated ±0.1mm
Contact PREMO for more detailed information about pad layout.
FOAM OPTION
CAP OPTION
1
Three Axes Transponder Inductors 3DCoil
All rights reserved. Share, use or communication of the contents of this document not permitted without written authorisation.
3DCoil11LP-AOI-XXXXJ
3DCoil11LP-AOIF-XXXXJ (foam option)
3DCoil11LP-AOIC-XXXXJ (cap option)
SMD 3D11 Coil Low Profile AOI 13x11.6x3.45 mm
C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas. Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321
E-mail: info@grupopremo.com Web http://www.grupopremo.com
2. Schematic Diagram
1
Wx
2-3
6-7
Wy
1
5
Wz
4
8
Designed for AMS ICs like AS3932 series, TI Chipset like MSP430 series, NXP, MAXIM (SensorDynamics), …etc
3. Materials
Core:
Ferrite Core
SMD Base: LCP with lead frame
Wires:
Enamell and Selfbonding copper wire
Label:
Polyimide with acrylic adhesive (*)
Pins:
Phosphor bronze with Sn100 finish
Foam Label: Acrylic foam with white polyimide and acrylic adhesive (*)
Cap:
LCP
Remark : Products comply with RoHS requirements.
(*)Label for flat top and ID marking. Not for autoplacement.
4. General Specifications. Recommended Reflow Profile
Typical Operating Frequency 125KHz
Storage Temperature -40 ºC → +85 ºC
Operating Temperature -40 ºC → +85 ºC
Lead Free Reflow Profile:
Equivalent to test condition K from MILSTD-202G, method 210F
Component temperature 250±5 ºC. Time 30 ± 5 s. Temperature
ramp/inmersion and emersion rate: 1ºC/s-4ºC/s. Time above 183
ºC: 90-120 s.
2
Three Axes Transponder Inductors 3DCoil
All rights reserved. Share, use or communication of the contents of this document not permitted without written authorisation.
3DCoil11LP-AOI-XXXXJ
3DCoil11LP-AOIF-XXXXJ (foam option)
3DCoil11LP-AOIC-XXXXJ (cap option)
SMD 3D11 Coil Low Profile AOI 13x11.6x3.45 mm
C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas. Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321
E-mail: info@grupopremo.com Web http://www.grupopremo.com
5. Electrical Characteristics
3DC11LP-AOI
Code
Lx,y,z
(mH)
Qx,y
nom
Qz
nom
f(kHz)
SRFx,y
(KHz)
Min
2.38
25
19
125
700
4.77
26
24
125
500
3DC11LP-AOI-0720J
7.20
20
20
125
300
3DC11LPAOI-C-0720J
7.20
20
20
134
300
3DC11LPAOI-A-3000J
30
6
6
20
115
(*) Ask for sensitivity test set up and recommendations
3DC11LP-AOI-0238J
3DC11LP-AOI-0477J
SRFz
(KHz)
Min
DCRx
(Ohm)
Max
DCRy
(Ohm)
Max
DCRz
(Ohm)
Max
Cpxy
(pF)
Max
Cpxz
(pF)
Max
Cpyz
(pF)
Max
Sensitivity
x,y
(mV/A/m)
Min (*)
Sensitivity z
(mV/A/m)
Min (*)
750
650
450
450
200
50
91
127
127
605
55
103
143
143
704
83
122
220
220
539
25
30
40
40
50
10
15
15
15
15
10
15
15
15
15
40
55
80
80
24
38
55
70
70
20.5
For foam label and cap options, main electrical characteristics will not vary from the standard version.
6. Packaging Information
TAPING SPECIFICATION (According to EIA481)
2± 0.5
13
±
0.
5
50
N
MI
min 24.4
330± 2
max 30.4
Standard version
Foam option
Cap option
13.2 mm
Ao
12.1mm
12.5 mm
Bo
13.5mm
13.9 mm
13.5 mm
Ko
W
Ppr
4.0mm
24mm
1000 pcs
5.6 mm
24 mm
600 pcs
MATERIAL LIST
ITEM
MATERIAL
Reel
Shock-Proof Antistatic PS 330 mm Ф
4.5 mm
Carrier tape
PS black colour 0.5 mm
24 mm
600 pcs
Cover tape
Polyester
Typical weight one piece 3DC11LP-AOI-0720J: 1.65 g
Typical weight one reel: 2 kg
3
Three Axes Transponder Inductors 3DCoil
All rights reserved. Share, use or communication of the contents of this document not permitted without written authorisation.
3DCoil11LP-AOI-XXXXJ
3DCoil11LP-AOIF-XXXXJ (foam option)
3DCoil11LP-AOIC-XXXXJ (cap option)
SMD 3D11 Coil Low Profile AOI 13x11.6x3.45 mm
C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas. Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321
E-mail: info@grupopremo.com Web http://www.grupopremo.com
7. Marking
PART Marking
PACKAGE LABELLING
PART NUMBER
BATCH/REEL
8. Reliability Tests
This part is qualified according to AEC-Q200 Revision D.
Withstands 1000 random drops from 1 m and 20 drops x 6 axis from 2 m over fine grained
wash-out concrete floor and with an added weight to the key housing of 60 g (contact
PREMO for specific TAG, Keyfob mechanical conditions for drop test).
Edition
2
Revision Date
30/01/14
4
Three Axes Transponder Inductors 3DCoil
All rights reserved. Share, use or communication of the contents of this document not permitted without written authorisation.