METRAVI
XB-32
DIGITAL MULTIMETER
GENERAL SPECIFICATIONS
Confirms to
Pollution degree
Altitude
Operating temperature
:
:
:
:
l
Storage temperature
:
l
Temperature Coefficient
:
MAX. Voltage between
terminals and earth ground
Fuse Protection
:
:
Display
Over Range indication
Low battery indication
Polarity indication
Power source
Battery type
Dimensions
Weight
:
:
:
:
:
:
:
:
l
l
l
l
l
l
l
l
l
l
l
l
l
l
600V CAT.III and 1000V CAT.II
2
< 2000 m.
0~40ºC (32ºF to 104ºF),
(<80% RH, non-condensing)
-10~50 ºC (14ºF to 122ºF), (<70% RH,
battery removed)
0.1X (specified accuracy) / ºC (<18ºC
or >28ºC)
750V AC rms or 1000V DC
mA :F 200mA/250V Æ5X20,
10A: unfused.
LCD, 1999counts, updates 2-3/sec.
LCD will display "1".
The " " is displayed on the LCD.
"-" displayed automatically.
4.5V
AAA 1.5V
158(L)´74(W)´31(H) mm.
220g. Approx. (battery included).
TECHNICAL SPECIFICATIONS
Resistance
Range
200W
2kW
20kW
200kW
2MW
20MW
Resolution
0.1W
1W
10W
100W
1kW
10kW
Accuracy
±(0.8% of rdg+3 digits)
Accuracy : ±(% of reading + number of digits) at 18ºC DC Current
Resolution
Accuracy
to 28ºC (64ºF to 82ºF) with relative humidity Range
±(0.8% of rdg+1 digit)
80%.
200mA
0.1mA
(Accuracy is specified for a period one year after calibration). 2mA
1mA
±(0.8% of rdg+1 digit)
±(1.0% of rdg+2 digits)
DC Voltage
20mA
10mA
Overload protection: 250V DC or 250V AC rms.
Range
Resolution
Accuracy
200mA
0.1mA
±(1.2% of rdg+1 digit)
200mV
0.1mV
10A
10mA
±(2.0% of rdg+5 digits)
Diode and Audible continuity Test
2V
1mV
±(0.5% of rdg + 1 digits)
l Overload protection
Range description
Test Condition
: F200mA/250V fuse
20V
10mV
(10A range unfused).
Built-in buzzer
Open Circuit Voltage
l Max. input current
sounds if resistance approx. 2.8Volts
200V
100mV
: mA: 200mA DC or 200mA AC rms
is less than
l 10A
1000V
1V
±(0.8% of rdg + 2 digits)
: 10A continuous, 20A 15 sec. MAX.
approx. 50W
l Input Impedance
: 1MW
Display read approx. Forward DC current
AC Current
l Max. input voltage
forward voltage
approx. 1mA.
: 250VDC or AC rms for 200mV
Range
Resolution
Accuracy
of diode
Reversed DC voltage
range and 1000VDC or peak AC
2mA
1mA
±(1.2% of rdg+3 digits)
approx. 2.8Volts.
for other ranges.
20mA
10mA
Overload protection: 250V DC or 250V AC rms.
AC Voltage
200mA
0.1mA
±(2.0% of rdg+3 digits)
Transistor
Range
Resolution
Accuracy
10A
10mA
±(3.0% of rdg+7 digits)
Range Description
Test Condition
2V
1mV
l Overload protection
: F200mA/250V fuse
hFE
Display read approx. Base Current approx.
20V
10mV
±(0.8% of rdg +3 digits)
(10A range unfused).
HFE value (0-1000) 10µA, Vce approx.
200V
100mV
of transistor under
2.8V.
l Max. input current
: mA: 200mA DC or 200mA AC rms
test (all type).
750V
1V
±(1.2% of rdg +3 digits)
l 10A
: 10A continuous, 20A 15 sec. MAX
l Frequency Range
l Input impedance
: 40Hz-1kHz;
: 10MW
OPTIONAL ACESSIORIES:
l Indication
l Max. input voltage
: Average (rms of sine wave)
: 250VDC or AC rms for 200mV
Infra-red non contact temperature adaptor to measure temperature
range and 1000VDC or 750V AC
from -30°C to 550°C with fixed emissivity of 0.95 and distance to
rms for other ranges,
sighting ratio of 8:1. Model TS-03
l Frequency Range
Clamp on Current Adaptor to measure current up to 1000A. Model
: 40Hz-1kHz;
CA-1000D
l Indication
: Average (rms of sine wave)
l
l
l
l
Clamp on Current Adaptor to measure upto 200A AC. Model CA-01
*Technical Specifications & Appearance are subject to change without prior notice
THE QUALITY LEADER
www.metravi.com