Congratulations on purchasing a Million Dollar Baby Product. This dresser will provide many years of service if you adhere to the following guidelines for assembly, maintenance, and operation. This dresser is for residential use only.
Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the dresser.
Do not use power screwdrivers. All of our dressers are made from natural woods.
Please understand that natural woods have color variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY LOOK
DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.
A. Top & bottom front panel (2)
B. Top & bottom rear panel (2)
C. Adjustable shelves (3)
N. Top panel
D. Stationary shelves (2)
E. Back panel
F. Left panel G. Right panel
K. Drawer Front
L. Drawer Back
I. Left drawer side J. Right drawer side
M. Drawer Bottom revised 01-2007

P. Cam lock bolt (22) Q. Cam lock (22) O. Metal shelf peg (12)
S. 3/8” Phillips head screw (46)
T 1 1/4” Phillips head screw (4)
U. 1 1/4” Phillips head screw (2)
R. Drawer knob (2)
V. Left panel glide
W. Right panel glide
X. Right drawer glide
Y. Left drawer glide
Screw eight cam lock bolts (P) into the threaded inserts on each side panel (F) and (G). The side panels are labeled left and right for easy identification. Use three
Phillips head screws (S) to attach the left (V) and right
(W) panel glide. The glide wheel should face the front of the bookcase with the angled part to the top.
S
S
S
P
P
Tools Needed
Phillips screwdriver
P
P

Insert cam locks and attach the top and bottom front panels (A), top and bottom rear panels (B) and the two stationary shelves
(D) to the left side panel (F). Rotate the cam locks to secure the parts. Be sure that the cam locks on the front panels face to the inside of the bookcase.
B
A
Q
P
D A
B
G
Insert cam locks in the top and bottom front and rear panels and stationary shelves. Align the right side panel (G) over the assembly so that all of the dowels and cam lock bolts fit into position. Push the panel firmly in place and rotate the cam locks to secure the panel.

N
Screw four cam lock bolts into the threaded inserts in the top panel (N). Insert four cam locks into the holes at the top of the case. Align the top panel over the dowels and push it into position. tighten the cam locks to secure the top.
P P
P P
Attach the back panel (E) to the case with thirty four
Phillips head screws (S).
Insert the metal shelf pins into the holes at the desired height in the side panels and place the adjustable shelves (C) on top of them.
O

Screw two cam lock bolts (P) into the threaded inserts in the drawer front (K). Insert cam locks (Q) into the drawer sides (I) and (J) then rotate the locks to secure the sides.
P
Q
Q
P
Slide the drawer bottom (M) into the grooves in the sides and front of the drawer.
M

Position the back panel on the drawer assembly and secure it with four Phillips head screws (T).
L
T
Attach the left (Y) and right (X) drawer glides with three
Phillips head screws (S) each. Be sure the glide wheel is towards the back of the drawer.
Y
S
X
Use the two Phillips head screws (U) to attach the drawer knobs (R). Then slide the drawer into the case.
U
R