Specication MM84 True RMS Digital Multimeter Specication MM84 True RMS Digital Multimeter ELECTRICAL SPECIFICATIONS All specified accuracies are at 23°C ± 5°C, <75% RH for 1 year Temperature Coefficient: 0.1 x (specified accuracy) per °C. (0°C to 18°C, 28°C to 50°C) AC coupled true rms specified from 5% to 100% of range Crest factor: d3 Input impedance: 10M: Overload protection: 1000V DC or 750 AC rms 500V DC or 350 AC rms on 200mV range DC Current DC Voltage Range Resolution 200mV 0.01mV 2V 0.0001V 20V 0.001V 200V 0.01V 1000V 0.1V Range Accuracy ± (0.05 % of rdg + 3 dgts) Input impedance: 10M: Overload protection: 1000V DC or 750 AC rms 500V DC or 350 AC rms on the 200mV range Resolution 200mV 0.01mV 2V 0.0001V 20V 0.001V 200V 0.01V 750V 0.1V Accuracy Voltage Burden 200μA 0.01μA ± (0.5 % of rdg + 5 dgts) 300mV 2mA 0.0001mA 300mV 20mA 0.001mA 300mV 200mA 0.01mA 20A * 0.001A 800mV True RMS AC Current (50Hz to 1kHz) Accuracy Range 50Hz to 500Hz ± (1.0 % of rdg + 10 dgts) 500Hz to 2kHz ± (2.0 % of rdg + 20 dgts) 50Hz to 500Hz ± (2.0 % of rdg + 20 dgts) M84 instructions.indd 6 600mV ± (2.0 % of rdg + 10 dgts) * Current on 10 A range applied for 30 seconds maximum Overload protection: 0.5A/600V fast blow ceramic fuse on 200μA to 200mA ranges 20A/600V fast blow ceramic fuse on 20A range True RMS AC Voltage Range Resolution Resolution Accuracy Voltage Burden 200μA 0.01μA ± (0.8 % of rdg + 10 dgts) 300mV 2mA 0.0001mA 20mA 0.001mA 300mV 200mA 0.01mA 600mV 20A * 0.001A 300mV ± (2.5 % of rdg + 10 dgts) 800mV 03/07/2012MM84 15:48:30 instructions.indd 3 03/07/2012 15:48:30 Specication MM84 True RMS Digital Multimeter Specication MM84 True RMS Digital Multimeter * Current on 10 A range applied for 30 seconds maximum AC coupled true rms specified from 5% to 100% of range. Crest factor: d 3. Overload protection: 0.5A/600V fast blow ceramic fuse on 200μA to 200mA ranges 20A/600V fast blow ceramic fuse on 20A range Duty Cycle Range Frequency Range Resolution Pulse Width Accuracy (5V Logic) 0% to 90% 20Hz to 20kHz 0.1 % >10 us ±(2.0% rdg + 10 dgts) Overload protection: 500V DC or AC rms Resistance Range Resolution Accuracy 200: 0.01: ± (0.25% of rdg + 10 dgts) 2k: 0.0001k: 20k: 0.001k: 200k: 0.01k: 2M: 0.0001M: Continuity Audible indication: <150: Response time: Approx 500ms Open circuit voltage: 3.3V DC approx Overload protection: 500V DC or AC rms ± (0.15% of rdg + 3 dgts) Diode Test ± (0.25% of rdg + 10 dgts) 20M: 0.001M: ± (1.0% of rdg + 10 dgts) Open circuit voltage: 3.3V DC approx. Overload protection: 500V DC or AC rms. Range Resolution Test Current Open Circuit Voltage Accuracy 2V 0.1mV 1.0 mA 3.3V DC approx ± (0.5% rdg + 1 dgt) Overload protection: 500V DC or AC rms Frequency Range Resolution 2 kHz 0.1 Hz 20 kHz 1 Hz 200 kHz 10 Hz Logic Test Accuracy Thresholds ± (0.5 % of rdg + 3 dgts) Logic 1 (Hi) Logic 0 (Lo) 2.8V ± 0.8V 0.8V ± 0.5V Pulse Rise Time (Max) Pulse Repetition Rate (Max) Pulse Width (Min) 10μs 1 Mpps 25ns Duty cycle: > 20% and < 80% Frequency response: 20 MHz Overload protection: 500V DC or AC rms Input sensitivity: 50mV rms minimum for sine wave 400mV rms minimum at >30% and <70% duty cycle Minimum input: 22Hz range > 2Hz, 220Hz range > 20Hz Minimum pulse width: >2μs at >10Hz Overload protection: 500V DC or AC rms 1 Specication MM84 True RMS Digital Multimeter GENERAL SPECIFICATIONS Display: 4½ digit liquid crystal display with a maximum reading of 19999 Analog bargraph: 22 segments with measurement 20 times per second Polarity: Automatic, positive implied, negative polarity indication Overrange: Most significant digit displays “1” Low battery indication: symbol is displayed when the battery voltage drops below the operating level Measurement rate: 2.5 times per second, nominal Auto power off: After approx 45 minutes Operating environment: 0°C to 50°C at < 70% RH Storage temperature: -20°C to 60°C at < 80% RH Altitude: Up to 2000m Power: Single standard 9 volt battery, NEDA 1604, JIS006P, IEC 6F22 Battery Life: 300 hours typical with carbon-zinc Dimensions: 189 (H) x 87 (W) x 37 mm (D) Weight: 330g approx. including battery Includes: TL16 test leads, holster, 9V battery (installed) and instructions. Check out what else you can get from Martindale: • • • • • • • • • • • • 17th Edition Testers Accessories Calibration Equipment Continuity Testers Electricians’ Kits Environmental Products Full Calibration & Repair Service Fuse Finders Digital Clamp Meters Digital Multimeters Labels Microwave Leakage Detectors • • • • • • • • • • • • Motor Maintenance Equipment Multifunction Testers Non-trip Loop Testers Pat Testers & Accessories Phase Rotation Testers Proving Units Socket Testers Thermometers & Probes Test Leads Voltage Indicators Specialist Metrohm Testers (4 & 5kV) Specialist Drummond Testers SAFETY: Conforms to BS EN61010-1, CAT II 1000V DC, 750V AC Class II Double Insulation Pollution Degree: 2 TL16 test leads conform to BS EN61010-031, CAT III 1000V, CAT IV 600V, 10A EMC: Conforms to BS EN 61326 M84 instructions.indd 4 Martindale Electric Company Limited Metrohm House, Penfold Trading Estate, Imperial Way, Watford WD24 4YY, UK Tel: +44(0)1923 441717 Fax: +44 (0)1923 446900 E-mail: sales@martindale-electric.co.uk Website: www.martindale-electric.co.uk © 2012 Martindale Electric Company Ltd. Registered in England No. 3387451. E. & O.E. Document Rev1 LITMM84 03/07/2012MM84 15:48:29 instructions.indd 1 03/07/2012 15:48:24