TWIN-ENGINE AIRCRAFT
ELECTRICAL SYSTEM
Mod. AQ-1/EV
INTRODUCTION
The aircraft electrical system simulator mod. AQ-1/EV, is
included in a complete set of educational equipment for the
basic training on aircraft systems.
The simulator consists of a computer-assisted panel, with silkscreen mimic diagram for a clear location of its components.
Various zones of the mimic diagram are represented with
different colours to emphasize peculiar aspects of the system.
Light and displays indicators, installed in the mimic diagram
enable to assess the evolutions of the control.
- MAINT bus (Ground handling bus)
• SYSTEM SUPERVISION SIMULATIONS
• STATUS
- Park
- Airport service support
- APU power supply
- APU engine starting
- Take off
- Landing
• ELECTRICAL PROBLEMS HANDLING
The graphic display of the information available at the control
TECHNICAL SPECIFICATIONS:
input, such as aircraft status (park, APU …) on the computer
screen enables the permanent monitoring of the system.
The system is arranged on a silk-screen, panel provided with:
• Color silk screen panel
The operational conditions are set by students according to the
the PC.
• Selection of the operational conditions with switches and
pushbuttons
• Displays and LED visualisation
TRAINING PROGRAM:
• Dynamic display of the parameters, on the computer screen,
with high graphic performance software (LabVIEW)
• POWER GENERATION
• USB connexion with the computer
educational path indicated in the courseware, carried out by
- DC battery
- APU (Auxiliary unit)
Power supply:
- Alternator (Integrated Drive Generators)
- Transformers-rectifiers (TR)
- Electronic inverter DC-AC
REQUIRED
- External power
- Random air turbine (RAT)
230 Vca 50 Hz single-phase - 50 VA
(Other voltage and frequency on request)
PERSONAL COMPUTER
- NOT INCLUDED -
- Emergency generator
- Hydraulic circuits (Green, blue, yellow)
• POWER NETWORK
- DC BAT bus
- DC BUS1 – DC BUS2
- DC ESS BUS ( emergency bus)
- AC BUS1
- AC ESS bus (emergency bus)
- AC BUS2
SUPPLIED WITH
SOFTWARE:
SIMULATOR CONTROL MANAGEMENT WITH
GRAPHICAL DISPLAY ON THE PC SCREEN
THEORETICAL-EXPERIMENTAL
HANDBOOK
- BUS TIE contactor
ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: export@elettronicaveneta.com
3
TWIN-ENGINE AIRCRAFT
HYDRAULIC SYSTEM
Mod. AQ-2/EV
Light and displays indicators, installed in the mimic diagram
enable to assess the evolutions of the control.
The graphic display of the information available at the control
- Flight
- Landing
• CONFIGURATIONS
- APU start
- Hydraulic pumps ON
- Electric pumps ON
- PTU automatic
- Wheel pedal disc angle control
- 5 Flaps/Slats position selection
- 6 Flight control pushbuttons
- Speed and Park brake
- Hydraulic emergency situations (PTU, RAT …)
input, such as aircraft status (park, APU …) on the computer
screen enables the permanent monitoring of the system.
TECHNICAL SPECIFICATIONS:
INTRODUCTION
The aircraft hydraulic system simulator mod. AQ-2/EV, is
included in a complete set of educational equipment for the
basic training on aircraft systems.
The simulator consists of a computer-assisted panel, with silkscreen mimic diagram for a clear location of its components.
Various zones of the mimic diagram are represented with
different colours to emphasize peculiar aspects of the system.
The operational conditions are set by students according to the
educational path indicated in the courseware, carried out by
the PC.
TRAINING PROGRAM:
• PRESSURE GENERATION
- Engine Driven Pump (green hydraulic circuit)
- Engine Driven Pump (yellow hydraulic circuit)
- Electric pump (blue hydraulic circuit)
- Power Transfer Unit (PTU)
• PRESSURE ACCUMULATOR
- Circuit 1 accumulator
- Circuit 2 accumulator
- Circuit 3 accumulator
• HYDRAULIC ACTUATORS
Green circuit
- Flaps, Rudder, Spoilers, Nose wheel steering
Blue circuit
- Spoilers, Rudder, Elevator
Yellow circuit
- Elevator, Spoiler, Landing gear
• SYSTEM SUPERVISION SIMULATIONS
• MODE
- Ground
- Takeoff
4
The system is arranged on a silk-screen, panel provided with:
• Color silk screen panel
• Selection of the operational conditions with switches and
pushbuttons
• Displays and LED visualisation
• Dynamic display of the parameters, on the computer screen,
with high graphic performance software (LabVIEW)
• USB connexion with the computer
Power supply:
230 Vca 50 Hz single-phase - 50 VA
(Other voltage and frequency on request)
REQUIRED
PERSONAL COMPUTER
- NOT INCLUDED -
SUPPLIED WITH
SOFTWARE:
SIMULATOR CONTROL MANAGEMENT WITH
GRAPHICAL DISPLAY ON THE PC SCREEN
THEORETICAL-EXPERIMENTAL
HANDBOOK
ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: export@elettronicaveneta.com