AHF-10 SERIES
AC/DC Power Module 10W
FEATURES
►Fully Encapsulated Plastic Case for PCB Mounting
►Universal Input 85~264VAC, 47~440Hz
►Protection Class II as per IEC/EN 60536
►I/O Isolation 3000VAC with Reinforced Insulation
►Operating Ambient Temp. Range -25℃ to +70℃
►Overload/Voltage and Short Circuit Protection
►Designed-in EMI Emission meets EN55011/22 Class B & FCC Level B
►Designed-in EMC Immunity meets EN61000-4-2,3,4,5,6,8,11
►Eco Design, Compliant to Energy Star Specification and
ErP Directive 2009/125/EC
►UL/cUL/IEC/EN 60950-1 Safety Approval & CE Marking
PRODUCT OVERVIEW
The MINMAX AHF-10 series is a range of fully encapsulated AC/DC power supply modules. The product features EMI-filter to EN55022, class B and EMS
compliance to EN 61000-4 standard. Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications
in products with worldwide markets.The AHF-10 series provide a cost effective solution for many space critical applications in commercial and industrial
electronic equipment.
Model Selection Guide
Model
Number
Output
Voltage
AHF-10S03
AHF-10S05
AHF-10S12
AHF-10S15
AHF-10S24
AHF-10D12
AHF-10D15
VDC
3.3
5
12
15
24
±12
±15
Output Current
Input Current
115VAC, 60Hz
@Max. Load
mA(typ.)
137
199
191
191
190
172
169
Max.
mA
2000
2000
833
666
416
±380
±300
Max. capacitive
Load
μF
3900
3300
2200
2200
1000
#1000
#1000
# For each output
Efficiency
(typ.)
@Max. Load
%
70
73
76
76
76
77
77
Input Specifications
Parameter
Input Voltage Range
Input Frequency Range
Input Voltage Range
No-Load Power Consumption
Model
All Models
115VAC
230VAC
Inrush Current
Cold Start at 25℃
Min.
85
47
120
-------
Typ.
-------------
Max.
264
440
370
0.3
10
20
Unit
VAC
Hz
VDC
W
A
A
Min.
---------------------
Typ.
±1.0
±0.5
±0.5
±2.5
1.5
0.8
10
120
±0.01
---
Max.
±2.0
±1.0
±1.0
±5.0
1.8
1.0
----±0.02
5
Unit
%Vnom.
%
%
%
%VPP of Vo
%VPP of Vo
%Inom.
% of Vo
%/℃
% Vout
---
---
%Inom.
Output Specifications
Conditions
Parameter
Output Voltage Setting Accuracy
Line Regulation
Vin=Min. to Max. @Full Load
Single Output Models
Iout=Min. to Max.
Dual Output Models
3.3 & 5.0VDC Output Models
0-20 MHz Bandwidth
Other Output Models
Load Regulation
Ripple & Noise
Minimum Load
Over Voltage Protection
Temperature Coefficient
Overshoot
Zener diode clamp
Foldback, auto-recovery
105
(long term overload condition may cause damage)
Hiccup mode, Automatic Recovery
Current Limitation
Short Circuit Protection
E-mail:sales@minmax.com.tw
2016/08/30
REV:15
Tel:886-6-2923150
Page 1 of 3
AHF-10 SERIES
AC/DC POWER MODULE 10W
General Specifications
Parameter
I/O Isolation Voltage
I/O Isolation Resistance
Switching Frequency
Hold-up Time
MTBF (calculated)
Protection Class II
Safety Approvals
Conditions
Input to Output, 60 Seconds
500 VDC
Min.
3000
100
-----
Typ.
----100
20
300,000
Max.
---------
Unit
VACrms
MΩ
KHz
ms
Hours
MIL-HDBK-217F@25℃, Ground Benign
According IEC/EN 60536
UL/cUL 60950-1 recognition (UL certificate), IEC/EN 60950-1 (CB-report)
EMC Specifications
Parameter
Standards & Level
Conduction and Radiation
EN55011 ,EN55024
ESD
Radiated immunity
Fast transient
Surge
EMI
EMS
Conducted immunity
PFMF
Dips
Interruptions
Performance
EN55011, EN55022, FCC part 15
Class B
EN61000-4-2 air ± 8kV , Contact ± 4kV
EN61000-4-3 10V/m
EN61000-4-4 ±2kV
EN61000-4-5 ±1kV
EN61000-4-6 10Vrms
EN61000-4-8 30A/m
EN61000-4-11 30% 10ms
EN61000-4-11 >95% 5000ms
B
A
B
B
B
A
B
C
Environmental Specifications
Parameter
Conditions
Operating Ambient Temperature Range
Storage Temperature Range
Power Derating
Min.
-25
-40
Natural Convection
+50℃ to +70℃
Shutdown, Internal IC Junction Temperature
Thermal Shutdown
---
Automatic Recovery, Internal IC Junction Temperature
----Natural Convection
Humidity (non condensing)
Cooling
Lead Temperature (1.5mm from case for 10Sec.)
---
Unit
Typ.
----0.375
142
Max.
+70
+85
---
℃
℃
W/℃
℃
67
--95
℃
% rel. H
260
℃
Notes
1
2
3
4
5
All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted.
These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power
supplies however they may not meet all listed specifications.
We recommend to protect the converter by a slow blow fuse in the input supply line.
Other input and output voltage may be available, please contact factory.
Specifications are subject to change without notice
E-mail:sales@minmax.com.tw
2016/08/30
REV:15
Tel:886-6-2923150
Page 2 of 3
AHF-10 SERIES
AC/DC POWER MODULE 10W
Package Specifications
Mechanical Dimensions
Pin Connections
6.0 [0.24]
10.16
[0.40]
10.16
[0.40]
19.2 [0.76]
0.7 [0.03]
Pin
Single Output
AC(N) – AC Neutral
2
AC(L) – AC Line
4
1.0 [ 0.04]
3
5
3
Dual Output
1
-Vout
4
NC
Common
5
+Vout
5.0 [0.20]
54.0 [2.13]
Bottom View
64.0 [2.52]
NC: No Connection
1
►All dimensions in mm
4.0 [0.16]
2
17.78 [0.70]
45.0 [1.77]
►Tolerance: ±0.5
►Pin
(inches)
(±0.02)
diameter  1.0 ±0.1 (0.04±0.004)
Physical Characteristics
Case Size
:
64.0x45.0x19.2mm (2.52x1.77x0.76 Inches)
Case Material
:
Plastic resin (flammability to UL 94V-0 rated)
Pin Material
:
Copper Alloy with Gold Plate Over Nickel Subplate
Weight
:
92g
Minmax Technology Co., Ltd.
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: sales@minmax.com.tw
2016/08/30
REV:15
Page 3 of 3